Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!
Ogłoszenie
Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.
#1 2015-03-20 12:17:16
andreq - 
Członek DUG
- andreq
- Członek DUG
- Skąd: Nisko
- Zarejestrowany: 2005-01-11
Interpretacja SMART dysku
Witam
Mam dysk w desktopie, martwi mnie kilka wpisów SMART:
Kod:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 199 051 Pre-fail Always - 66
Kod:
Error 10555 occurred at disk power-on lifetime: 2134 hours (88 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 01 b1 c9 1f ed Error: UNC at LBA = 0x0d1fc9b1 = 220187057 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 40 da 01 b1 c9 1f ed 00 00:31:56.961 READ VERIFY SECTOR(S) 40 da 01 b0 c9 1f ed 00 00:31:56.961 READ VERIFY SECTOR(S) 40 da 01 af c9 1f ed 00 00:31:56.961 READ VERIFY SECTOR(S) 40 da 01 ae c9 1f ed 00 00:31:56.961 READ VERIFY SECTOR(S) 40 da 01 ad c9 1f ed 00 00:31:56.961 READ VERIFY SECTOR(S)
Dysk ma parę miesięcy, kmputer nie przenoszony, dysk nie upadł, ostatnio nie chciał z niego wystartować windows, pomogła naprawa przy pomocy Data Lifeguard Diagnostic w czasie Extended Test, co o tym sądzicie?
Cały SMART:
Kod:
smartctl 6.4 2014-10-07 r4002 [i686-linux-3.17-1-686-pae] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Black
Device Model: WDC WD1002FAEX-00Z3A0
Serial Number: WD-WCATRC546024
LU WWN Device Id: 5 0014ee 2b389b5f5
Firmware Version: 05.01D05
User Capacity: 1,000,204,886,016 bytes [1,00 TB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Fri Mar 20 11:57:29 2015 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (16680) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 193) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x3037) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 199 051 Pre-fail Always - 66
3 Spin_Up_Time 0x0027 176 174 021 Pre-fail Always - 4191
4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 1257
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0
9 Power_On_Hours 0x0032 098 098 000 Old_age Always - 2177
10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1242
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 301
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 955
194 Temperature_Celsius 0x0022 105 096 000 Old_age Always - 42
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0
SMART Error Log Version: 1
ATA Error Count: 10555 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 10555 occurred at disk power-on lifetime: 2134 hours (88 days + 22 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 01 b1 c9 1f ed Error: UNC at LBA = 0x0d1fc9b1 = 220187057
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
40 da 01 b1 c9 1f ed 00 00:31:56.961 READ VERIFY SECTOR(S)
40 da 01 b0 c9 1f ed 00 00:31:56.961 READ VERIFY SECTOR(S)
40 da 01 af c9 1f ed 00 00:31:56.961 READ VERIFY SECTOR(S)
40 da 01 ae c9 1f ed 00 00:31:56.961 READ VERIFY SECTOR(S)
40 da 01 ad c9 1f ed 00 00:31:56.961 READ VERIFY SECTOR(S)
Error 10554 occurred at disk power-on lifetime: 2134 hours (88 days + 22 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 b1 c9 1f ed Error: UNC at LBA = 0x0d1fc9b1 = 220187057
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
40 da 00 00 c9 1f ed 00 00:31:55.245 READ VERIFY SECTOR(S)
40 da 00 00 c8 1f ed 00 00:31:55.245 READ VERIFY SECTOR(S)
40 da 00 00 c7 1f ed 00 00:31:55.245 READ VERIFY SECTOR(S)
40 da 00 00 c6 1f ed 00 00:31:55.245 READ VERIFY SECTOR(S)
40 da 00 00 c5 1f ed 00 00:31:55.244 READ VERIFY SECTOR(S)
Error 10553 occurred at disk power-on lifetime: 2134 hours (88 days + 22 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 01 b7 c0 1f ed Error: UNC at LBA = 0x0d1fc0b7 = 220184759
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
40 da 01 b7 c0 1f ed 00 00:31:53.529 READ VERIFY SECTOR(S)
40 da 01 b6 c0 1f ed 00 00:31:53.529 READ VERIFY SECTOR(S)
40 da 01 b5 c0 1f ed 00 00:31:53.529 READ VERIFY SECTOR(S)
40 da 01 b4 c0 1f ed 00 00:31:53.529 READ VERIFY SECTOR(S)
40 da 01 b3 c0 1f ed 00 00:31:53.529 READ VERIFY SECTOR(S)
Error 10552 occurred at disk power-on lifetime: 2134 hours (88 days + 22 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 b7 c0 1f ed Error: UNC at LBA = 0x0d1fc0b7 = 220184759
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
40 da 00 00 c0 1f ed 00 00:31:51.820 READ VERIFY SECTOR(S)
40 da 00 00 bf 1f ed 00 00:31:51.818 READ VERIFY SECTOR(S)
40 da 00 00 be 1f ed 00 00:31:51.817 READ VERIFY SECTOR(S)
40 da 00 00 bd 1f ed 00 00:31:51.816 READ VERIFY SECTOR(S)
40 da 00 00 bc 1f ed 00 00:31:51.815 READ VERIFY SECTOR(S)
Error 10551 occurred at disk power-on lifetime: 2134 hours (88 days + 22 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 01 ab 63 1f ed Error: UNC at LBA = 0x0d1f63ab = 220160939
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
40 da 01 ab 63 1f ed 00 00:31:50.017 READ VERIFY SECTOR(S)
40 da 01 aa 63 1f ed 00 00:31:50.017 READ VERIFY SECTOR(S)
40 da 01 a9 63 1f ed 00 00:31:50.017 READ VERIFY SECTOR(S)
40 da 01 a8 63 1f ed 00 00:31:50.017 READ VERIFY SECTOR(S)
40 da 01 a7 63 1f ed 00 00:31:50.017 READ VERIFY SECTOR(S)
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Conveyance offline Completed without error 00% 2137 -
# 2 Conveyance offline Completed: read failure 70% 2133 21834257
# 3 Conveyance offline Completed: read failure 70% 2133 21834257
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.Offline
#2 2015-03-20 18:22:54
morfik - Cenzor wirtualnego świata
#3 2015-03-20 18:57:28
uzytkownikubunt - Zbanowany
- uzytkownikubunt
- Zbanowany
- Zarejestrowany: 2012-04-25
Re: Interpretacja SMART dysku
1782
Ostatnio edytowany przez uzytkownikubunt (2016-12-01 01:14:25)
Offline
#4 2015-03-20 21:47:27
pasqdnik - Pijak ;-P
- pasqdnik
- Pijak ;-P
- Skąd: Wrocław
- Zarejestrowany: 2006-03-06
Re: Interpretacja SMART dysku
Jeśli dysk jest na gwarancji to trzeba zrobić backup i reklamować.
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
Dum spiro - spero ...
pozdrawiam, pasqdnik
Offline
#5 2015-03-21 00:28:09
morfik - Cenzor wirtualnego świata
Re: Interpretacja SMART dysku
Ja tam podejrzewam problem z mechaniką dysku. 10k błędów, rozkręcanie ponad 4s, błędy odczytu i do tego problemy chyba z zasilaniem. Jeśli taki stan się utrzymuje, to dysk do wymiany, temu pisałem by dać pełny skan.
Offline
#6 2015-03-22 16:58:50
andreq - Członek DUG
- andreq
- Członek DUG
- Skąd: Nisko
- Zarejestrowany: 2005-01-11
Re: Interpretacja SMART dysku
Zrobiony pełen skan, wynik:
Kod:
smartctl 6.4 2014-10-07 r4002 [x86_64-linux-3.16.0-1-grml-amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Black
Device Model: WDC WD1002FAEX-00Z3A0
Serial Number: WD-WCATRC546024
LU WWN Device Id: 5 0014ee 2b389b5f5
Firmware Version: 05.01D05
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sun Mar 22 15:54:57 2015 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (16680) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 193) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x3037) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 199 051 Pre-fail Always - 66
3 Spin_Up_Time 0x0027 230 174 021 Pre-fail Always - 1483
4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 1270
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
9 Power_On_Hours 0x0032 097 097 000 Old_age Always - 2197
10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1255
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 308
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 961
194 Temperature_Celsius 0x0022 108 096 000 Old_age Always - 39
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0
SMART Error Log Version: 1
ATA Error Count: 10555 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 10555 occurred at disk power-on lifetime: 2134 hours (88 days + 22 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 01 b1 c9 1f ed Error: UNC at LBA = 0x0d1fc9b1 = 220187057
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
40 da 01 b1 c9 1f ed 00 00:31:56.961 READ VERIFY SECTOR(S)
40 da 01 b0 c9 1f ed 00 00:31:56.961 READ VERIFY SECTOR(S)
40 da 01 af c9 1f ed 00 00:31:56.961 READ VERIFY SECTOR(S)
40 da 01 ae c9 1f ed 00 00:31:56.961 READ VERIFY SECTOR(S)
40 da 01 ad c9 1f ed 00 00:31:56.961 READ VERIFY SECTOR(S)
Error 10554 occurred at disk power-on lifetime: 2134 hours (88 days + 22 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 b1 c9 1f ed Error: UNC at LBA = 0x0d1fc9b1 = 220187057
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
40 da 00 00 c9 1f ed 00 00:31:55.245 READ VERIFY SECTOR(S)
40 da 00 00 c8 1f ed 00 00:31:55.245 READ VERIFY SECTOR(S)
40 da 00 00 c7 1f ed 00 00:31:55.245 READ VERIFY SECTOR(S)
40 da 00 00 c6 1f ed 00 00:31:55.245 READ VERIFY SECTOR(S)
40 da 00 00 c5 1f ed 00 00:31:55.244 READ VERIFY SECTOR(S)
Error 10553 occurred at disk power-on lifetime: 2134 hours (88 days + 22 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 01 b7 c0 1f ed Error: UNC at LBA = 0x0d1fc0b7 = 220184759
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
40 da 01 b7 c0 1f ed 00 00:31:53.529 READ VERIFY SECTOR(S)
40 da 01 b6 c0 1f ed 00 00:31:53.529 READ VERIFY SECTOR(S)
40 da 01 b5 c0 1f ed 00 00:31:53.529 READ VERIFY SECTOR(S)
40 da 01 b4 c0 1f ed 00 00:31:53.529 READ VERIFY SECTOR(S)
40 da 01 b3 c0 1f ed 00 00:31:53.529 READ VERIFY SECTOR(S)
Error 10552 occurred at disk power-on lifetime: 2134 hours (88 days + 22 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 b7 c0 1f ed Error: UNC at LBA = 0x0d1fc0b7 = 220184759
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
40 da 00 00 c0 1f ed 00 00:31:51.820 READ VERIFY SECTOR(S)
40 da 00 00 bf 1f ed 00 00:31:51.818 READ VERIFY SECTOR(S)
40 da 00 00 be 1f ed 00 00:31:51.817 READ VERIFY SECTOR(S)
40 da 00 00 bd 1f ed 00 00:31:51.816 READ VERIFY SECTOR(S)
40 da 00 00 bc 1f ed 00 00:31:51.815 READ VERIFY SECTOR(S)
Error 10551 occurred at disk power-on lifetime: 2134 hours (88 days + 22 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 01 ab 63 1f ed Error: UNC at LBA = 0x0d1f63ab = 220160939
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
40 da 01 ab 63 1f ed 00 00:31:50.017 READ VERIFY SECTOR(S)
40 da 01 aa 63 1f ed 00 00:31:50.017 READ VERIFY SECTOR(S)
40 da 01 a9 63 1f ed 00 00:31:50.017 READ VERIFY SECTOR(S)
40 da 01 a8 63 1f ed 00 00:31:50.017 READ VERIFY SECTOR(S)
40 da 01 a7 63 1f ed 00 00:31:50.017 READ VERIFY SECTOR(S)
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 2192 -
# 2 Extended offline Aborted by host 90% 2181 -
# 3 Conveyance offline Completed without error 00% 2137 -
# 4 Conveyance offline Completed: read failure 70% 2133 21834257
# 5 Conveyance offline Completed: read failure 70% 2133 21834257
2 of 2 failed self-tests are outdated by newer successful extended offline self-test # 1
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.Offline
#7 2015-03-22 17:33:15
morfik - Cenzor wirtualnego świata
Re: Interpretacja SMART dysku
Test, jak widać, przechodzi bez błędów. Czas startu dysku też jest wyraźnie niższy. być może te problemy, które miałeś były tymczasowe i teraz już dysk się powinien normalnie zachowywać. Nie wiem czy jest sens iść z tym do serwisu, pewnie ci po miesiącu powiedzą to samo. Zapisz sobie ten wynik i za tydzień przeskanuj ponownie. Potem sobie porównaj te raporty i jeśli cyferki będą rosły, to dysk będzie do wymiany. Póki co, to tylko Power-Off_Retract_Count poszedł w górę o parę punktów, choć ja tam nie wiem czy to coś oznacza -- u mnie takiego parametru nawet nie ma. xD Mam jakiś inny na pozycji 192 ale on jest wyraźnie niższy. Także monitoruj i jeśli nie zauważysz problemów w pracy urządzenia, to nic mu nie będzie
Offline
#8 2015-03-22 17:41:56
Jacekalex - Podobno człowiek...;)
- Jacekalex
- Podobno człowiek...;)
- Skąd: /dev/random
- Zarejestrowany: 2008-01-07
Re: Interpretacja SMART dysku
Różnymi Pre-failami nie ma się za bardzo co martwić, mój dyzio takie komunikaty miał w SMART już w 2008 i chodzi do dzisiaj.
Wygląda w ogóle strasznie (jak zawsze), a chodzi mniej więcej tak samo,
jak 7 lat temu:
Kod:
smartctl 6.3 2014-07-26 r3976 [x86_64-linux-3.19.2-gr1] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda ES
Device Model: ST3400620NS
Serial Number: 9QH0BX9K
Firmware Version: 3.AEG
User Capacity: 400,088,457,216 bytes [400 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA/ATAPI-7 (minor revision not indicated)
Local Time is: Sun Mar 22 17:25:37 2015 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 25) The self-test routine was aborted by
the host.
Total time to complete Offline
data collection: ( 430) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 132) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 117 099 006 Pre-fail Always - 123653519
3 Spin_Up_Time 0x0003 094 092 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 096 096 020 Old_age Always - 4269
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 089 060 030 Pre-fail Always - 806780342
9 Power_On_Hours 0x0032 067 067 000 Old_age Always - 29126
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 096 096 020 Old_age Always - 4476
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 061 052 045 Old_age Always - 39 (Min/Max 23/39)
194 Temperature_Celsius 0x0022 039 048 000 Old_age Always - 39 (0 16 0 0 0)
195 Hardware_ECC_Recovered 0x001a 073 060 000 Old_age Always - 201879888
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0
202 Data_Address_Mark_Errs 0x0032 100 253 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Aborted by host 90% 26704 -
# 2 Extended offline Aborted by host 90% 26700 -
# 3 Extended offline Interrupted (host reset) 90% 25088 -
# 4 Extended offline Aborted by host 90% 23429 -
# 5 Extended offline Aborted by host 90% 23428 -
# 6 Extended offline Aborted by host 90% 23428 -
# 7 Short offline Aborted by host 80% 23428 -
# 8 Extended offline Interrupted (host reset) 90% 15764 -
# 9 Extended offline Aborted by host 90% 15760 -
#10 Short offline Completed without error 00% 14372 -
#11 Extended offline Completed without error 00% 8707 -
#12 Extended offline Aborted by host 90% 6704 -
#13 Short offline Completed without error 00% 5860 -
#14 Extended offline Interrupted (host reset) 80% 5860 -
#15 Extended offline Interrupted (host reset) 50% 3100 -
#16 Extended offline Aborted by host 90% 3098 -
#17 Short offline Interrupted (host reset) 90% 435 -
#18 Extended offline Self-test routine in progress 90% 29114 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.I w dodatku jest z tych sławnych dysków Seagate, co to przeważnie po pół roku się rozlatują. :D
Pozdro
;-)
Ostatnio edytowany przez Jacekalex (2015-03-22 17:44:51)
W demokracji każdy naród ma taką władzę, na jaką zasługuje ;)
Si vis pacem para bellum ;) | Pozdrawiam :)
Offline
#9 2015-03-22 19:00:35
andreq - Członek DUG
- andreq
- Członek DUG
- Skąd: Nisko
- Zarejestrowany: 2005-01-11
Re: Interpretacja SMART dysku
Dzięki. Zobaczę co będzie się z nim działo w przyszłości.
Offline
#10 2015-03-22 19:09:30
yossarian - Szczawiożerca
- yossarian
- Szczawiożerca
- Skąd: Shangri-La
- Zarejestrowany: 2011-04-25
Re: Interpretacja SMART dysku
pasqdnik napisał(-a):
Jeśli dysk jest na gwarancji to trzeba zrobić backup i reklamować.
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
Offline
#11 2015-03-22 19:38:18
pasqdnik - Pijak ;-P
- pasqdnik
- Pijak ;-P
- Skąd: Wrocław
- Zarejestrowany: 2006-03-06
Re: Interpretacja SMART dysku
yossarian napisał(-a):
pasqdnik napisał(-a):
Jeśli dysk jest na gwarancji to trzeba zrobić backup i reklamować.
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
Grr nie wiem, czemu mi się to wkleiło. Dopóki jest PASSED to ok.
Dum spiro - spero ...
pozdrawiam, pasqdnik
Offline
#12 2015-03-22 21:31:01
morfik - Cenzor wirtualnego świata
Re: Interpretacja SMART dysku
Jacekalex, tylko, że te seagaty mają dziwne przeliczniki w smarcie, temu masz takie kosmiczne liczby ale to nie oznacza, że coś się chrzani. xD Ja tam nie umiem tego czytać i w sumie mi nie za bardzo chce się szukać info jak przeliczyć te wartości na zrozumiałe dla człowieka. WD ma normalny raport smart i zwykle analiza nie przysparza problemów i widać od razu gdzie są problemy.
Offline
#13 2015-03-22 21:36:05
Jacekalex - Podobno człowiek...;)
- Jacekalex
- Podobno człowiek...;)
- Skąd: /dev/random
- Zarejestrowany: 2008-01-07
Re: Interpretacja SMART dysku
@up
Ja nie twierdzę, że coś się chrzani, na razie chodzi, chociaż na przestrzeni ostatnich 6 miechów dwukrotnie musiałem dyzia naprawiać, raz zjebał się grub z rekordu rozruchowego, i musiałem go przywracać z LiveDVD, a raz nie chiał wstać system z sda1, pomogło wtedy fsck.
Wcześniej przez 7 lat nic podobnego nie widziałem, także zacząłem się dyziowi uważniej przyglądać.
Poza tym wskaźniki w Seagate nie są takie straszne, dopóki Power on Hours nie pokazują w sekundach. xD
Ostatnio edytowany przez Jacekalex (2015-03-22 21:38:24)
W demokracji każdy naród ma taką władzę, na jaką zasługuje ;)
Si vis pacem para bellum ;) | Pozdrawiam :)
Offline