Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!
Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.
Witam serdecznie,
jak w temacie mam mega uciążliwy problem z wiatrakiem.
Mój sprzęt to:
Dell inspirion 5521-6345 (lapek)
Grafa -> radeon HD 8700M - zainstalowane stery zamknięte -> ze str radeona
ram -> 6gb
dysk -> 750GB
procek -> i5
uname -a
Linux anon 3.11.4anon #1 SMP Sun Oct 6 20:20:28 CEST 2013 x86_64 GNU/Linux
Problem jest z wiatrakiem, chodzi jak szalony, pod windą nie było tego problemu.
średnia temperatura na procku to ok.45st., czasem chodzi spokojnie do 52st.C, bez wiatraków, a czasem załączy już przy 43st i ciągle buczy... nawet jak zejdzie do 40st,
sensors
coretemp-isa-0000 Adapter: ISA adapter Physical id 0: +40.0°C (high = +87.0°C, crit = +105.0°C) Core 0: +40.0°C (high = +87.0°C, crit = +105.0°C) Core 1: +37.0°C (high = +87.0°C, crit = +105.0°C) pkg-temp-0-virtual-0 Adapter: Virtual device temp1: +40.0°C
czy można to jakoś zwalczyć? bo naprawde jest uciążliwe i wiatrak załącza się różnie i róznie wyłącza...
Niestety nie moge pracować na jajku 3.2 gdyż nie obsługuje grafy oraz dotykowego ekranu.
------------------------
Kolejny problem jest z acpi, ponieważ jak przejdzie w stan uspienia, to po wzbudzeniu jest zawiecha -> odrazu bez błędu itp.
Oto logi z VAR
5.964412] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20130517/utaddress-251) [ 5.964418] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 5.964422] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 1 (20130517/utaddress-251) [ 5.964426] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 2 (20130517/utaddress-251) [ 5.964428] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 5.964430] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 1 (20130517/utaddress-251) [ 5.964432] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 2 (20130517/utaddress-251) [ 5.964435] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.516232] ACPI Warning: 0x0000000000004040-0x000000000000405f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130517/utaddress-251) [ 6.516240] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.285864] ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Integer], ACPI requires [Package] (20130517/nsarguments-95) [ 7.285896] ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Integer], ACPI requires [Package] (20130517/nsarguments-95)
[ 8.074248] ACPI Error: [\_SB_.PCI0.GFX0.DD02._BCL] Namespace lookup failure, AE_NOT_FOUND (20130517/psargs-359) [ 8.074256] ACPI Error: Method parse/execution failed [\_SB_.PCI0.PEG0.PEGP.DD02._BCL] (Node ffff8801d80b5510), AE_NOT_FOUND (20130517/psparse-536)
Oct 13 13:20:56 anon kernel: [ 0.136728] ACPI: Added _OSI(Module Device) Oct 13 13:20:56 anon kernel: [ 0.136730] ACPI: Added _OSI(Processor Device) Oct 13 13:20:56 anon kernel: [ 0.136732] ACPI: Added _OSI(3.0 _SCP Extensions) Oct 13 13:20:56 anon kernel: [ 0.136735] ACPI: Added _OSI(Processor Aggregator Device) Oct 13 13:20:56 anon kernel: [ 0.138386] ACPI: EC: Look up EC in DSDT Oct 13 13:20:56 anon kernel: [ 0.140200] ACPI: Executed 1 blocks of module-level executable AML code Oct 13 13:20:56 anon kernel: [ 0.159299] ACPI: SSDT 000000009ae17018 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20130117) Oct 13 13:20:56 anon kernel: [ 0.159755] ACPI: Dynamic OEM Table Load: Oct 13 13:20:56 anon kernel: [ 0.159757] ACPI: SSDT (null) 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20130117) Oct 13 13:20:56 anon kernel: [ 0.168632] ACPI: SSDT 000000009ae18a98 00303 (v01 PmRef ApIst 00003000 INTL 20130117) Oct 13 13:20:56 anon kernel: [ 0.169136] ACPI: Dynamic OEM Table Load: Oct 13 13:20:56 anon kernel: [ 0.169139] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20130117) Oct 13 13:20:56 anon kernel: [ 0.178752] ACPI: SSDT 000000009ae16d98 00119 (v01 PmRef ApCst 00003000 INTL 20130117) Oct 13 13:20:56 anon kernel: [ 0.179193] ACPI: Dynamic OEM Table Load: Oct 13 13:20:56 anon kernel: [ 0.179195] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20130117) Oct 13 13:20:56 anon kernel: [ 0.189364] ACPI: Interpreter enabled Oct 13 13:20:56 anon kernel: [ 0.189374] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130517/hwxface-571) Oct 13 13:20:56 anon kernel: [ 0.189380] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571) Oct 13 13:20:56 anon kernel: [ 0.189399] ACPI: (supports S0 S3 S4 S5) Oct 13 13:20:56 anon kernel: [ 0.189402] ACPI: Using IOAPIC for interrupt routing Oct 13 13:20:56 anon kernel: [ 0.189441] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug Oct 13 13:20:56 anon kernel: [ 0.189595] ACPI: No dock devices found. Oct 13 13:20:56 anon kernel: [ 0.387327] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) Oct 13 13:20:56 anon kernel: [ 0.387507] \_SB_.PCI0:_OSC invalid UUID Oct 13 13:20:56 anon kernel: [ 0.387509] _OSC request data:1 8 0 Oct 13 13:20:56 anon kernel: [ 0.387580] \_SB_.PCI0:_OSC invalid UUID Oct 13 13:20:56 anon kernel: [ 0.387582] _OSC request data:1 1f 0 Oct 13 13:20:56 anon kernel: [ 0.387587] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM Oct 13 13:20:56 anon kernel: [ 0.387590] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
Mam nadzieję że za dużo logów nie dałem... ale poprostu nie wiem jak z tym poradzic...
pozdrawiam
edit
cat /proc/cmdline
BOOT_IMAGE=/boot/vmlinuz-3.11.4anon root=UUID=1c4820a8-c728-4a21-9472-652102156a8d ro quiet
No musiałem kompilować, mogłem zrobić błąd, nie mówię że nie, bo na starym jajku nie działał dotyk i grafa.
Ale to jest stable, jaki świeższy? testing?
Raz przeniosłem się na nistabilny(sid) i nie szło prawie nic zrobic, gnomow nie było itp.
Zrobiłem to przez dodanie do sources.list repo z sid'a i potem aptitude dist-upgrade
pozdrawiam
Ostatnio edytowany przez Kovciu (2013-10-13 15:33:00)
Offline
Cześć.
To Debian Wheezy?
Lepsze wyjście to jakieś świeższa wersja i sterowniki z repozytorium lub wtedy otwarte.
Kernel sam kompilowałeś?
Pokaż jeszcze:
cat /proc/cmdline
Offline
Zamiast edytować wcześniejszy wpis dopisuj kolejne informacje niżej gdy ktoś o coś zapyta.
Miałem na mysli wersje testową. Tam są trochę aktualniejsze pakiety.
Sprawdź czy coś pomogą opcje w Grubie:
pcie_aspm=force acpi_osi='!Windows 2012' i915.i915_enable_rc6=1
Problemy z wybudzeniem przy używaniu zamkniętych sterowników AMD to standard.
Offline
Tylko nie wiem gdzie dodać tą opcje, czy to w /boot/grub/grub.cfg; bo tez widzialem ze daje się opcje w menu.lst ale ja nie mam takiego pliku....
Przepraszam za tamto, ale sie bałem, że mnie zruzgają że dodaję post pod postem
Offline
http://dug.net.pl/tekst/225/
Dotyczy Cię fragment z Grub 2.
Offline
Witam, niestety to nie to. Problem pozostaje. To co zauważyłem że start systemu się zmienił po tej operacji, na początku bardzo dużo białych napisów i część z nich była odnosnie waring w acpi....
Offline
A jakieś konkrety podasz?
Komunikaty startowe zobaczysz tak:
http://dug.net.pl/tekst/229/komunikaty_startowe___l … artu_systemu/
Pokaż co masz w poleceniach Gruba i zawartość /var/log/Xorg.0.log
Najlepiej jakbyś sprawdzał na jądrze z backportów.
Offline
Log ze startu - jednak jak na moje oczy tu wszystkiego nie widać.... a nie jestem wstanie spamiętać co tam się odbywa... ale szereg poprostu białych napisów przed tym co tu wypisane...
Sun Oct 13 18:25:19 2013: [ ok ] Setting parameters of disc: (none). Sun Oct 13 18:25:19 2013: [ ok ] Setting preliminary keymap...done. Sun Oct 13 18:25:19 2013: [ ok ] Activating swap...done. Sun Oct 13 18:25:19 2013: [....] Checking root file system...fsck from util-linux 2.20.1 Sun Oct 13 18:25:19 2013: /dev/sda1: clean, 312202/45023232 files, 14594372/180061696 blocks Sun Oct 13 18:25:19 2013: done. Sun Oct 13 18:25:19 2013: [info] Loading kernel module loop. Sun Oct 13 18:25:19 2013: [ ok ] Cleaning up temporary files... /tmp. Sun Oct 13 18:25:19 2013: [ ok ] Activating lvm and md swap...done. Sun Oct 13 18:25:19 2013: [....] Checking file systems...fsck from util-linux 2.20.1 Sun Oct 13 18:25:19 2013: done. Sun Oct 13 18:25:19 2013: [ ok ] Mounting local filesystems...done. Sun Oct 13 18:25:19 2013: [ ok ] Activating swapfile swap...done. Sun Oct 13 18:25:19 2013: [ ok ] Cleaning up temporary files.... Sun Oct 13 18:25:19 2013: [ ok ] Setting kernel variables ...done. Sun Oct 13 18:25:19 2013: [ ok ] Configuring network interfaces...done. Sun Oct 13 18:25:20 2013: [ ok ] Starting rpcbind daemon.... Sun Oct 13 18:25:20 2013: [ ok ] Starting NFS common utilities: statd idmapd. Sun Oct 13 18:25:20 2013: [ ok ] Cleaning up temporary files.... Sun Oct 13 18:25:20 2013: [ ok ] Setting up ALSA...done. Sun Oct 13 18:25:21 2013: [info] Setting console screen modes. Sun Oct 13 18:25:21 2013: [9;30][14;30][info] Skipping font and keymap setup (handled by console-setup). Sun Oct 13 18:25:21 2013: [ ok ] Setting up console font and keymap...done. Sun Oct 13 18:25:21 2013: [ ok ] Setting up X socket directories... /tmp/.X11-unix /tmp/.ICE-unix. Sun Oct 13 18:25:21 2013: [ ok ] Setting sensors limits. Sun Oct 13 18:25:21 2013: INIT: Entering runlevel: 2 Sun Oct 13 18:25:21 2013: [info] Using makefile-style concurrent boot in runlevel 2. Sun Oct 13 18:25:21 2013: [ ok ] Starting NFS common utilities: statd idmapd. Sun Oct 13 18:25:21 2013: [ ok ] Starting rpcbind daemon...[....] Already running.. Sun Oct 13 18:25:22 2013: [ ok ] Enabling additional executable binary formats: binfmt-support. Sun Oct 13 18:25:22 2013: [ ok ] Starting enhanced syslogd: rsyslogd. Sun Oct 13 18:25:22 2013: [ ok ] Starting anac(h)ronistic cron: anacron deferred while on battery power. Sun Oct 13 18:25:22 2013: speech-dispatcher disabled; edit /etc/default/speech-dispatcher Sun Oct 13 18:25:23 2013: [ ok ] Starting deferred execution scheduler: atd. Sun Oct 13 18:25:23 2013: [ ok ] Starting acpi_fakekey daemon...done. Sun Oct 13 18:25:23 2013: [ ok ] Starting ACPI services.... Sun Oct 13 18:25:23 2013: [ ok ] Loading cpufreq kernel modules...done (none). Sun Oct 13 18:25:23 2013: [ ok ] CPUFreq Utilities: Setting ondemand CPUFreq governor...disabled, governor not available...done. Sun Oct 13 18:25:25 2013: [ ok ] Starting automount.... Sun Oct 13 18:25:25 2013: [ ok ] Starting VirtualBox kernel modules:. Sun Oct 13 18:25:25 2013: [ ok ] Starting periodic command scheduler: cron. Sun Oct 13 18:25:25 2013: [ ok ] Starting MTA: exim4. Sun Oct 13 18:25:26 2013: [ ok ] Starting system message bus: dbus. Sun Oct 13 18:25:26 2013: [ ok ] Starting bluetooth: bluetoothd rfcomm. Sun Oct 13 18:25:27 2013: [ ok ] Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon. Sun Oct 13 18:25:27 2013: [ ok ] Starting network connection manager: NetworkManager. Sun Oct 13 18:25:27 2013: [warn] PulseAudio configured for per-user sessions ... (warning). Sun Oct 13 18:25:27 2013: saned disabled; edit /etc/default/saned Sun Oct 13 18:25:27 2013: [ ok ] Starting GNOME Display Manager: gdm3. Sun Oct 13 18:25:28 2013: [ ok ] Enabling power management...done. Sun Oct 13 18:25:28 2013: [ ok ] Starting Common Unix Printing System: cupsd.
grub -> bez dodatku
# If you change this file, run 'update-grub' afterwards to update # /boot/grub/grub.cfg. # For full documentation of the options in this file, see: # info -f grub -n 'Simple configuration' GRUB_DEFAULT=0 GRUB_TIMEOUT=5 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX_DEFAULT="option" GRUB_CMDLINE_LINUX="" # Uncomment to enable BadRAM filtering, modify to suit your needs # This works with Linux (no patch required) and with any kernel that $ # the memory map information from GRUB (GNU Mach, kernel of FreeBSD .$ #GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef" # Uncomment to disable graphical terminal (grub-pc only) #GRUB_TERMINAL=console # The resolution used on graphical terminal # note that you can use only modes which your graphic card supports v$ # you can see them in real GRUB with the command `vbeinfo' #GRUB_GFXMODE=640x480 # Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter $ #GRUB_DISABLE_LINUX_UUID=true # Uncomment to disable generation of recovery mode menu entries #GRUB_DISABLE_RECOVERY="true" # Uncomment to get a beep at grub start #GRUB_INIT_TUNE="480 440 1"
log z Xów
[ 24.467] X.Org X Server 1.12.4 Release Date: 2012-08-27 [ 24.467] X Protocol Version 11, Revision 0 [ 24.467] Build Operating System: Linux 3.2.0-4-amd64 x86_64 Debian [ 24.467] Current Operating System: Linux anon 3.11.4anon #1 SMP Sun Oct 6 20:20:28 CEST 2013 x86_64 [ 24.467] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.11.4anon root=UUID=1c4820a8-c728-4a21-9472-652102156a8d ro option [ 24.467] Build Date: 17 April 2013 10:22:47AM [ 24.467] xorg-server 2:1.12.4-6 (Julien Cristau <jcristau@debian.org>) [ 24.467] Current version of pixman: 0.26.0 [ 24.467] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 24.467] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 24.467] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Oct 13 18:25:31 2013 [ 24.553] (==) Using config file: "/etc/X11/xorg.conf" [ 24.553] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 24.627] (==) ServerLayout "aticonfig Layout" [ 24.627] (**) |-->Screen "aticonfig-Screen[0]-0" (0) [ 24.627] (**) | |-->Monitor "aticonfig-Monitor[0]-0" [ 24.627] (**) | |-->Device "aticonfig-Device[0]-0" [ 24.627] (==) Automatically adding devices [ 24.627] (==) Automatically enabling devices [ 24.752] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 24.752] Entry deleted from font path. [ 24.925] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist. [ 24.925] Entry deleted from font path. [ 24.925] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, built-ins [ 24.925] (==) ModulePath set to "/usr/lib/xorg/modules" [ 24.925] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 24.925] (II) Loader magic: 0x7fde39c99ae0 [ 24.925] (II) Module ABI versions: [ 24.925] X.Org ANSI C Emulation: 0.4 [ 24.925] X.Org Video Driver: 12.1 [ 24.925] X.Org XInput driver : 16.0 [ 24.925] X.Org Server Extension : 6.0 [ 24.926] (--) PCI:*(0:0:2:0) 8086:0166:1028:05b8 rev 9, Mem @ 0xc1000000/4194304, 0xb0000000/268435456, I/O @ 0x00004000/64 [ 24.926] (--) PCI: (0:1:0:0) 1002:6601:1028:05b8 rev 0, Mem @ 0xa0000000/268435456, 0xc0000000/262144, I/O @ 0x00003000/256, BIOS @ 0x????????/131072 [ 24.926] (II) Open ACPI successful (/var/run/acpid.socket) [ 24.926] (II) "extmod" will be loaded by default. [ 24.926] (II) "dbe" will be loaded by default. [ 24.926] (II) "glx" will be loaded by default. [ 24.926] (II) "record" will be loaded by default. [ 24.926] (II) "dri" will be loaded by default. [ 24.926] (II) "dri2" will be loaded by default. [ 24.926] (II) LoadModule: "extmod" [ 24.939] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so [ 24.958] (II) Module extmod: vendor="X.Org Foundation" [ 24.958] compiled for 1.12.4, module version = 1.0.0 [ 24.958] Module class: X.Org Server Extension [ 24.958] ABI class: X.Org Server Extension, version 6.0 [ 24.958] (II) Loading extension SELinux [ 24.958] (II) Loading extension MIT-SCREEN-SAVER [ 24.958] (II) Loading extension XFree86-VidModeExtension [ 24.958] (II) Loading extension XFree86-DGA [ 24.958] (II) Loading extension DPMS [ 24.958] (II) Loading extension XVideo [ 24.958] (II) Loading extension XVideo-MotionCompensation [ 24.958] (II) Loading extension X-Resource [ 24.958] (II) LoadModule: "dbe" [ 24.959] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so [ 24.971] (II) Module dbe: vendor="X.Org Foundation" [ 24.971] compiled for 1.12.4, module version = 1.0.0 [ 24.971] Module class: X.Org Server Extension [ 24.971] ABI class: X.Org Server Extension, version 6.0 [ 24.972] (II) Loading extension DOUBLE-BUFFER [ 24.972] (II) LoadModule: "glx" [ 24.972] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 24.990] (II) Module glx: vendor="Advanced Micro Devices, Inc." [ 24.990] compiled for 6.9.0, module version = 1.0.0 [ 24.991] (II) Loading extension GLX [ 24.991] (II) LoadModule: "record" [ 24.991] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so [ 24.991] (II) Module record: vendor="X.Org Foundation" [ 24.991] compiled for 1.12.4, module version = 1.13.0 [ 24.991] Module class: X.Org Server Extension [ 24.991] ABI class: X.Org Server Extension, version 6.0 [ 24.991] (II) Loading extension RECORD [ 24.991] (II) LoadModule: "dri" [ 24.992] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so [ 25.010] (II) Module dri: vendor="X.Org Foundation" [ 25.010] compiled for 1.12.4, module version = 1.0.0 [ 25.010] ABI class: X.Org Server Extension, version 6.0 [ 25.010] (II) Loading extension XFree86-DRI [ 25.010] (II) LoadModule: "dri2" [ 25.010] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so [ 25.011] (II) Module dri2: vendor="X.Org Foundation" [ 25.011] compiled for 1.12.4, module version = 1.2.0 [ 25.011] ABI class: X.Org Server Extension, version 6.0 [ 25.011] (II) Loading extension DRI2 [ 25.011] (II) LoadModule: "fglrx" [ 25.011] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so [ 25.924] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc." [ 25.924] compiled for 1.4.99.906, module version = 13.20.5 [ 25.924] Module class: X.Org Video Driver [ 25.934] (II) Loading sub module "fglrxdrm" [ 25.934] (II) LoadModule: "fglrxdrm" [ 25.934] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so [ 25.972] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc." [ 25.972] compiled for 1.4.99.906, module version = 13.20.5 [ 25.972] (II) AMD Proprietary Linux Driver Version Identifier:13.20.5 [ 25.972] (II) AMD Proprietary Linux Driver Release Identifier: UNSUPPORTED-13.20.11 [ 25.972] (II) AMD Proprietary Linux Driver Build Date: Sep 21 2013 02:26:09 [ 25.972] (++) using VT number 7 [ 25.978] (WW) Falling back to old probe method for fglrx [ 26.062] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default [ 26.093] ukiDynamicMajor: found major device number 251 [ 26.093] ukiDynamicMajor: found major device number 251 [ 26.093] ukiOpenByBusid: Searching for BusID PCI:1:0:0 [ 26.093] ukiOpenDevice: node name is /dev/ati/card0 [ 26.093] ukiOpenDevice: open result is 8, (OK) [ 30.852] ukiOpenByBusid: ukiOpenMinor returns 8 [ 30.852] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0 [ 30.962] (--) Chipset Supported AMD Graphics Processor (0x6601) found [ 30.996] (II) fglrx: intel VGA device detected, load intel driver. [ 30.996] (II) LoadModule: "intel" [ 30.997] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 31.105] (II) Module intel: vendor="X.Org Foundation" [ 31.105] compiled for 1.12.3.902, module version = 2.19.0 [ 31.105] Module class: X.Org Video Driver [ 31.105] ABI class: X.Org Video Driver, version 12.1 [ 31.106] (II) fglrx(0): pEnt->device->identifier=0x7fde3a3a3c20 [ 31.108] (II) intel(1): pEnt->device->identifier=(nil) [ 31.108] (EE) Screen 1 deleted because of no matching config section. [ 31.108] (II) UnloadModule: "intel" [ 31.109] (II) fglrx(0): === [xdl_xs112_atiddxPreInit] === begin [ 31.109] (II) fglrx(0): PowerXpress: Discrete GPU is selected. [ 31.301] drmOpenDevice: node name is /dev/dri/card0 [ 31.301] drmOpenDevice: open result is 10, (OK) [ 31.301] drmOpenByBusid: Searching for BusID pci:0000:00:02.0 [ 31.301] drmOpenDevice: node name is /dev/dri/card0 [ 31.302] drmOpenDevice: open result is 10, (OK) [ 31.302] drmOpenByBusid: drmOpenMinor returns 10 [ 31.302] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 [ 31.302] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32 [ 31.302] (==) fglrx(0): RGB weight 888 [ 31.302] (==) fglrx(0): Default visual is TrueColor [ 31.302] (**) fglrx(0): Option "Tiling" "off" [ 31.302] (**) fglrx(0): Option "LinearFramebuffer" "on" [ 31.302] (**) fglrx(0): Option "Shadow" "off" [ 31.302] (II) fglrx(0): Integrated Graphics Chipset: Intel(R) Ivybridge Mobile (GT2) [ 31.302] (**) fglrx(0): ChipID override: 0x0166 [ 31.302] (**) fglrx(0): ChipRev override: 9 [ 31.302] (**) fglrx(0): Chipset: "Ivybridge Mobile (GT2)" [ 31.302] (**) fglrx(0): Relaxed fencing enabled [ 31.302] (**) fglrx(0): Wait on SwapBuffers? enabled [ 31.302] (**) fglrx(0): Triple buffering? enabled [ 31.302] (**) fglrx(0): Framebuffer linear [ 31.302] (**) fglrx(0): Pixmaps linear [ 31.302] (**) fglrx(0): 3D buffers tiled [ 31.314] (**) fglrx(0): SwapBuffers wait enabled [ 31.314] (==) fglrx(0): video overlay key set to 0x101fe [ 31.314] (II) fglrx(0): Output LVDS1 using monitor section aticonfig-Monitor[0]-0 [ 31.314] (II) fglrx(0): found backlight control interface /sys/class/backlight/acpi_video0 [ 31.344] (II) fglrx(0): Output VGA1 has no monitor section [ 31.344] (II) fglrx(0): Output HDMI1 has no monitor section [ 31.344] (II) fglrx(0): Output DP1 has no monitor section [ 31.344] (II) fglrx(0): EDID for output LVDS1 [ 31.344] (II) fglrx(0): Manufacturer: LGD Model: 3df Serial#: 0 [ 31.344] (II) fglrx(0): Year: 2012 Week: 0 [ 31.344] (II) fglrx(0): EDID Version: 1.4 [ 31.344] (II) fglrx(0): Digital Display Input [ 31.344] (II) fglrx(0): 6 bits per channel [ 31.344] (II) fglrx(0): Digital interface is undefined [ 31.344] (II) fglrx(0): Max Image Size [cm]: horiz.: 34 vert.: 19 [ 31.344] (II) fglrx(0): Gamma: 2.20 [ 31.344] (II) fglrx(0): No DPMS capabilities specified [ 31.344] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [ 31.344] (II) fglrx(0): First detailed timing is preferred mode [ 31.344] (II) fglrx(0): Preferred mode is native pixel format and refresh rate [ 31.344] (II) fglrx(0): redX: 0.578 redY: 0.344 greenX: 0.337 greenY: 0.571 [ 31.344] (II) fglrx(0): blueX: 0.159 blueY: 0.120 whiteX: 0.313 whiteY: 0.329 [ 31.344] (II) fglrx(0): Manufacturer's mask: 0 [ 31.344] (II) fglrx(0): Supported detailed timing: [ 31.344] (II) fglrx(0): clock: 76.8 MHz Image Size: 344 x 194 mm [ 31.344] (II) fglrx(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1618 h_border: 0 [ 31.345] (II) fglrx(0): v_active: 768 v_sync: 771 v_sync_end 776 v_blanking: 790 v_border: 0 [ 31.345] (II) fglrx(0): Supported detailed timing: [ 31.345] (II) fglrx(0): clock: 51.2 MHz Image Size: 344 x 194 mm [ 31.345] (II) fglrx(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1618 h_border: 0 [ 31.345] (II) fglrx(0): v_active: 768 v_sync: 771 v_sync_end 776 v_blanking: 790 v_border: 0 [ 31.345] (II) fglrx(0): 35T9M156WHU [ 31.345] (II) fglrx(0): Unknown vendor-specific block 0 [ 31.345] (II) fglrx(0): EDID (in hex): [ 31.345] (II) fglrx(0): 00ffffffffffff0030e4df0300000000 [ 31.345] (II) fglrx(0): 00160104902213780a05f59458569228 [ 31.345] (II) fglrx(0): 1e505400000001010101010101010101 [ 31.345] (II) fglrx(0): 010101010101fb1d56fc500016303020 [ 31.345] (II) fglrx(0): 350058c21000001afc1356fc50001630 [ 31.345] (II) fglrx(0): 3020350058c21000001a000000fe0033 [ 31.345] (II) fglrx(0): 3554394d803135365748550a00000000 [ 31.345] (II) fglrx(0): 00004131940010000001010a202000a1 [ 31.345] (II) fglrx(0): EDID vendor "LGD", prod id 991 [ 31.345] (II) fglrx(0): Printing DDC gathered Modelines: [ 31.345] (II) fglrx(0): Modeline "1366x768"x0.0 76.75 1366 1414 1446 1618 768 771 776 790 +hsync -vsync (47.4 kHz eP) [ 31.345] (II) fglrx(0): Modeline "1366x768"x0.0 51.16 1366 1414 1446 1618 768 771 776 790 +hsync -vsync (31.6 kHz e) [ 31.345] (II) fglrx(0): Not using default mode "320x240" (doublescan mode not supported) [ 31.345] (II) fglrx(0): Not using default mode "400x300" (doublescan mode not supported) [ 31.345] (II) fglrx(0): Not using default mode "400x300" (doublescan mode not supported) [ 31.345] (II) fglrx(0): Not using default mode "512x384" (doublescan mode not supported) [ 31.345] (II) fglrx(0): Not using default mode "640x480" (doublescan mode not supported) [ 31.345] (II) fglrx(0): Not using default mode "640x512" (doublescan mode not supported) [ 31.345] (II) fglrx(0): Not using default mode "800x600" (doublescan mode not supported) [ 31.345] (II) fglrx(0): Not using default mode "896x672" (doublescan mode not supported) [ 31.345] (II) fglrx(0): Not using default mode "928x696" (doublescan mode not supported) [ 31.345] (II) fglrx(0): Not using default mode "960x720" (doublescan mode not supported) [ 31.345] (II) fglrx(0): Not using default mode "576x432" (doublescan mode not supported) [ 31.345] (II) fglrx(0): Not using default mode "680x384" (doublescan mode not supported) [ 31.345] (II) fglrx(0): Not using default mode "680x384" (doublescan mode not supported) [ 31.345] (II) fglrx(0): Not using default mode "700x525" (doublescan mode not supported) [ 31.345] (II) fglrx(0): Not using default mode "720x450" (doublescan mode not supported) [ 31.345] (II) fglrx(0): Not using default mode "800x512" (doublescan mode not supported) [ 31.345] (II) fglrx(0): Not using default mode "840x525" (doublescan mode not supported) [ 31.345] (II) fglrx(0): Not using default mode "840x525" (doublescan mode not supported) [ 31.345] (II) fglrx(0): Not using default mode "960x540" (doublescan mode not supported) [ 31.345] (II) fglrx(0): Not using default mode "960x600" (doublescan mode not supported) [ 31.345] (II) fglrx(0): Not using default mode "1024x768" (doublescan mode not supported) [ 31.345] (II) fglrx(0): Printing probed modes for output LVDS1 [ 31.345] (II) fglrx(0): Modeline "1366x768"x60.0 76.75 1366 1414 1446 1618 768 771 776 790 +hsync -vsync (47.4 kHz eP) [ 31.345] (II) fglrx(0): Modeline "1366x768"x40.0 51.16 1366 1414 1446 1618 768 771 776 790 +hsync -vsync (31.6 kHz e) [ 31.345] (II) fglrx(0): Modeline "1360x768"x59.8 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync (47.7 kHz d) [ 31.345] (II) fglrx(0): Modeline "1360x768"x60.0 72.00 1360 1408 1440 1520 768 771 781 790 +hsync -vsync (47.4 kHz d) [ 31.345] (II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d) [ 31.345] (II) fglrx(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d) [ 31.346] (II) fglrx(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d) [ 31.346] (II) fglrx(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d) [ 31.376] (II) fglrx(0): EDID for output VGA1 [ 31.376] (II) fglrx(0): EDID for output HDMI1 [ 31.376] (II) fglrx(0): EDID for output DP1 [ 31.376] (II) fglrx(0): Output LVDS1 connected [ 31.376] (II) fglrx(0): Output VGA1 disconnected [ 31.376] (II) fglrx(0): Output HDMI1 disconnected [ 31.376] (II) fglrx(0): Output DP1 disconnected [ 31.376] (II) fglrx(0): Using exact sizes for initial modes [ 31.376] (II) fglrx(0): Output LVDS1 using initial mode 1366x768 [ 31.376] (II) fglrx(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 31.376] (II) fglrx(0): Kernel page flipping support detected, enabling [ 31.376] (**) fglrx(0): Display dimensions: (340, 190) mm [ 31.376] (**) fglrx(0): DPI set to (102, 102) [ 31.376] (II) Loading sub module "fb" [ 31.376] (II) LoadModule: "fb" [ 31.376] (II) Loading /usr/lib/xorg/modules/libfb.so [ 31.386] (II) Module fb: vendor="X.Org Foundation" [ 31.386] compiled for 1.12.4, module version = 1.0.0 [ 31.386] ABI class: X.Org ANSI C Emulation, version 0.4 [ 31.386] (II) Loading sub module "dri2" [ 31.386] (II) LoadModule: "dri2" [ 31.386] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so [ 31.386] (II) Module dri2: vendor="X.Org Foundation" [ 31.386] compiled for 1.12.4, module version = 1.2.0 [ 31.386] ABI class: X.Org Server Extension, version 6.0 [ 31.386] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32 [ 31.386] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps) [ 31.386] (==) fglrx(0): Default visual is TrueColor [ 31.386] (**) fglrx(0): Option "DPMS" "true" [ 31.386] (==) fglrx(0): RGB weight 888 [ 31.386] (II) fglrx(0): Using 8 bits per RGB [ 31.386] (==) fglrx(0): Buffer Tiling is ON [ 31.386] (II) Loading sub module "fglrxdrm" [ 31.386] (II) LoadModule: "fglrxdrm" [ 31.386] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so [ 31.386] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc." [ 31.386] compiled for 1.4.99.906, module version = 13.20.5 [ 31.388] ukiDynamicMajor: found major device number 251 [ 31.388] ukiDynamicMajor: found major device number 251 [ 31.388] ukiOpenByBusid: Searching for BusID PCI:1:0:0 [ 31.388] ukiOpenDevice: node name is /dev/ati/card0 [ 31.388] ukiOpenDevice: open result is 11, (OK) [ 31.388] ukiOpenByBusid: ukiOpenMinor returns 11 [ 31.388] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0 [ 31.388] (**) fglrx(0): NoAccel = NO [ 31.388] (**) fglrx(0): AMD 2D Acceleration Architecture enabled [ 31.388] (--) fglrx(0): Chipset: "AMD Radeon (TM) HD 8500M/8700M" (Chipset = 0x6601) [ 31.388] (--) fglrx(0): (PciSubVendor = 0x1028, PciSubDevice = 0x05b8) [ 31.388] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD [ 31.388] (--) fglrx(0): Linear framebuffer (phys) at 0xa0000000 [ 31.388] (--) fglrx(0): MMIO registers at 0xc0000000 [ 31.388] (--) fglrx(0): I/O port at 0x00003000 [ 31.388] (==) fglrx(0): ROM-BIOS at 0x000c0000 [ 31.401] (II) fglrx(0): Battery is used [ 31.401] (II) fglrx(0): AMD Video BIOS revision 9 or later detected [ 31.401] (--) fglrx(0): Video RAM: 2097152 kByte, Type: DDR3 [ 31.401] (II) fglrx(0): PCIE card detected [ 31.401] (--) fglrx(0): Using per-process page tables (PPPT) as GART. [ 31.401] (WW) fglrx(0): board is an unknown third party board, chipset is supported [ 31.415] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf400000000, MCFBSize = 0x80000000) [ 31.415] (II) fglrx(0): RandR 1.2 support is enabled! [ 31.415] (II) fglrx(0): RandR 1.2 rotation support is enabled! [ 31.415] (==) fglrx(0): Center Mode is disabled [ 31.415] (II) Loading sub module "fb" [ 31.415] (II) LoadModule: "fb" [ 31.415] (II) Loading /usr/lib/xorg/modules/libfb.so [ 31.416] (II) Module fb: vendor="X.Org Foundation" [ 31.416] compiled for 1.12.4, module version = 1.0.0 [ 31.416] ABI class: X.Org ANSI C Emulation, version 0.4 [ 31.416] (II) Loading sub module "ddc" [ 31.416] (II) LoadModule: "ddc" [ 31.416] (II) Module "ddc" already built-in [ 31.519] (II) fglrx(0): Adapter AMD Radeon (TM) HD 8500M/8700M has 2 configurable heads and 0 displays connected. [ 31.519] (==) fglrx(0): PseudoColor visuals disabled [ 31.520] (II) Loading sub module "ramdac" [ 31.520] (II) LoadModule: "ramdac" [ 31.520] (II) Module "ramdac" already built-in [ 31.520] (==) fglrx(0): NoDRI = NO [ 31.520] (==) fglrx(0): Capabilities: 0x00000000 [ 31.520] (==) fglrx(0): CapabilitiesEx: 0x00000000 [ 31.520] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so" [ 31.520] (==) fglrx(0): UseFastTLS=0 [ 31.520] (II) fglrx(0): TearFreeDesktop is not supported on PowerXpress systems currently. [ 31.520] (--) Depth 24 pixmap format is 32 bpp [ 31.520] (II) LoadModule: "glesx" [ 31.520] (II) Loading /usr/lib/xorg/modules/glesx.so [ 31.695] (II) Module glesx: vendor="X.Org Foundation" [ 31.695] compiled for 1.4.99.906, module version = 1.0.0 [ 31.695] (II) Loading extension GLESX [ 31.722] (II) fglrx(0): [DRI2] Setup complete [ 31.722] (II) fglrx(0): [DRI2] DRI driver: i965 [ 31.722] (II) fglrx(0): Allocated new frame buffer 1408x768 stride 5632, untiled [ 31.726] (II) UXA(0): Driver registered support for the following operations: [ 31.726] (II) solid [ 31.726] (II) copy [ 31.726] (II) composite (RENDER acceleration) [ 31.726] (II) put_image [ 31.726] (II) get_image [ 31.726] (==) fglrx(0): Backing store disabled [ 31.726] (==) fglrx(0): Silken mouse enabled [ 31.726] (II) fglrx(0): Initializing HW Cursor [ 31.726] (II) fglrx(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 31.727] (**) fglrx(0): DPMS enabled [ 31.727] (==) fglrx(0): Intel XvMC decoder enabled [ 31.727] (II) fglrx(0): Set up textured video [ 31.727] (II) fglrx(0): [XvMC] xvmc_vld driver initialized. [ 31.727] (II) fglrx(0): direct rendering: DRI2 Enabled [ 31.727] (WW) fglrx(0): Option "VendorName" is not used [ 31.727] (WW) fglrx(0): Option "ModelName" is not used [ 31.727] (WW) fglrx(0): Option "Shadow" is not used [ 31.727] (WW) fglrx(0): Option "Tiling" is not used [ 31.727] (WW) fglrx(0): Option "LinearFramebuffer" is not used [ 31.727] (==) fglrx(0): hotplug detection: "enabled" [ 31.768] (II) Loading extension ATIFGLRXDRI [ 31.768] (II) fglrx(0): doing swlDriScreenInit [ 31.768] (II) fglrx(0): swlDriScreenInit for fglrx driver [ 31.768] ukiDynamicMajor: found major device number 251 [ 31.768] ukiDynamicMajor: found major device number 251 [ 31.768] ukiDynamicMajor: found major device number 251 [ 31.768] ukiOpenByBusid: Searching for BusID PCI:1:0:0 [ 31.768] ukiOpenDevice: node name is /dev/ati/card0 [ 31.768] ukiOpenDevice: open result is 13, (OK) [ 31.768] ukiOpenByBusid: ukiOpenMinor returns 13 [ 31.768] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0 [ 31.768] (II) fglrx(0): [uki] DRM interface version 1.0 [ 31.768] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0" [ 31.768] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000 [ 31.768] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7fde338f2000 [ 31.768] (II) fglrx(0): [uki] framebuffer handle = 0x3000 [ 31.769] (II) fglrx(0): [uki] added 1 reserved context for kernel [ 31.769] (II) fglrx(0): swlDriScreenInit done [ 31.769] (II) fglrx(0): Kernel Module Version Information: [ 31.769] (II) fglrx(0): Name: fglrx [ 31.769] (II) fglrx(0): Version: 13.20.5 [ 31.769] (II) fglrx(0): Date: Sep 21 2013 [ 31.769] (II) fglrx(0): Desc: AMD FireGL DRM kernel module [ 31.769] (II) fglrx(0): Kernel Module version matches driver. [ 31.769] (II) fglrx(0): Kernel Module Build Time Information: [ 31.769] (II) fglrx(0): Build-Kernel UTS_RELEASE: 3.11.4anon [ 31.769] (II) fglrx(0): Build-Kernel MODVERSIONS: yes [ 31.769] (II) fglrx(0): Build-Kernel __SMP__: yes [ 31.769] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000 [ 31.769] (II) fglrx(0): [uki] register handle = 0x00004000 [ 31.794] (II) fglrx(0): DRI initialization successfull [ 31.794] (II) fglrx(0): FBADPhys: 0xf400000000 FBMappedSize: 0x01080000 [ 31.795] (II) fglrx(0): Intel display surface mc addr for AMD: ffefce0000 [ 31.795] (==) fglrx(0): Backing store disabled [ 31.795] (II) Loading extension FGLRXEXTENSION [ 31.795] (**) fglrx(0): DPMS enabled [ 31.795] (II) fglrx(0): Initialized in-driver Xinerama extension [ 31.795] (**) fglrx(0): Textured Video is enabled. [ 31.796] (II) fglrx(0): GLESX enableFlags = 848 [ 31.796] (II) fglrx(0): GLESX is enabled [ 31.796] (II) LoadModule: "amdxmm" [ 31.796] (II) Loading /usr/lib/xorg/modules/amdxmm.so [ 31.857] (II) Module amdxmm: vendor="X.Org Foundation" [ 31.857] compiled for 1.4.99.906, module version = 2.0.0 [ 31.858] (II) Loading extension AMDXVOPL [ 31.858] (II) Loading extension AMDXVBA [ 31.858] XvScreenInit: screen devPrivates ptr non-NULL before init [ 31.869] (II) fglrx(0): UVD feature is enabled(II) fglrx(0): [ 31.870] (II) fglrx(0): Enable composite support successfully [ 31.870] (WW) fglrx(0): Option "VendorName" is not used [ 31.870] (WW) fglrx(0): Option "ModelName" is not used [ 31.870] (WW) fglrx(0): Option "Shadow" is not used [ 31.870] (WW) fglrx(0): Option "Tiling" is not used [ 31.870] (WW) fglrx(0): Option "LinearFramebuffer" is not used [ 31.870] (II) fglrx(0): X context handle = 0x1 [ 31.870] (II) fglrx(0): [DRI] installation complete [ 31.872] (--) RandR disabled [ 31.872] (II) Initializing built-in extension Generic Event Extension [ 31.872] (II) Initializing built-in extension SHAPE [ 31.872] (II) Initializing built-in extension MIT-SHM [ 31.872] (II) Initializing built-in extension XInputExtension [ 31.872] (II) Initializing built-in extension XTEST [ 31.872] (II) Initializing built-in extension BIG-REQUESTS [ 31.872] (II) Initializing built-in extension SYNC [ 31.872] (II) Initializing built-in extension XKEYBOARD [ 31.872] (II) Initializing built-in extension XC-MISC [ 31.872] (II) Initializing built-in extension SECURITY [ 31.872] (II) Initializing built-in extension XINERAMA [ 31.872] (II) Initializing built-in extension XFIXES [ 31.872] (II) Initializing built-in extension RENDER [ 31.872] (II) Initializing built-in extension RANDR [ 31.872] (II) Initializing built-in extension COMPOSITE [ 31.872] (II) Initializing built-in extension DAMAGE [ 31.872] (II) SELinux: Disabled on system [ 31.873] ukiDynamicMajor: found major device number 251 [ 31.873] ukiDynamicMajor: found major device number 251 [ 31.874] ukiOpenByBusid: Searching for BusID PCI:1:0:0 [ 31.874] ukiOpenDevice: node name is /dev/ati/card0 [ 31.874] ukiOpenDevice: open result is 14, (OK) [ 31.874] ukiOpenByBusid: ukiOpenMinor returns 14 [ 31.874] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0 [ 32.309] ukiDynamicMajor: found major device number 251 [ 32.309] ukiDynamicMajor: found major device number 251 [ 32.310] ukiDynamicMajor: found major device number 251 [ 32.310] ukiOpenDevice: node name is /dev/ati/card0 [ 32.310] ukiOpenDevice: open result is 15, (OK) [ 32.310] ukiGetBusid returned 'PCI:1:0:0' [ 32.310] ukiOpenDevice: node name is /dev/ati/card1 [ 32.310] ukiOpenDevice: open result is -1, (No such device) [ 32.310] ukiOpenDevice: open result is -1, (No such device) [ 32.310] ukiOpenDevice: Open failed [ 32.310] ukiOpenDevice: node name is /dev/ati/card2 [ 32.310] ukiOpenDevice: open result is -1, (No such device) [ 32.310] ukiOpenDevice: open result is -1, (No such device) [ 32.310] ukiOpenDevice: Open failed [ 32.310] ukiOpenDevice: node name is /dev/ati/card3 [ 32.310] ukiOpenDevice: open result is -1, (No such device) [ 32.310] ukiOpenDevice: open result is -1, (No such device) [ 32.310] ukiOpenDevice: Open failed [ 32.310] ukiOpenDevice: node name is /dev/ati/card4 [ 32.310] ukiOpenDevice: open result is -1, (No such device) [ 32.310] ukiOpenDevice: open result is -1, (No such device) [ 32.310] ukiOpenDevice: Open failed [ 32.310] ukiOpenDevice: node name is /dev/ati/card5 [ 32.310] ukiOpenDevice: open result is -1, (No such device) [ 32.310] ukiOpenDevice: open result is -1, (No such device) [ 32.310] ukiOpenDevice: Open failed [ 32.310] ukiOpenDevice: node name is /dev/ati/card6 [ 32.310] ukiOpenDevice: open result is -1, (No such device) [ 32.310] ukiOpenDevice: open result is -1, (No such device) [ 32.310] ukiOpenDevice: Open failed [ 32.310] ukiOpenDevice: node name is /dev/ati/card7 [ 32.310] ukiOpenDevice: open result is -1, (No such device) [ 32.311] ukiOpenDevice: open result is -1, (No such device) [ 32.311] ukiOpenDevice: Open failed [ 32.311] ukiOpenDevice: node name is /dev/ati/card8 [ 32.311] ukiOpenDevice: open result is -1, (No such device) [ 32.311] ukiOpenDevice: open result is -1, (No such device) [ 32.311] ukiOpenDevice: Open failed [ 32.311] ukiOpenDevice: node name is /dev/ati/card9 [ 32.311] ukiOpenDevice: open result is -1, (No such device) [ 32.311] ukiOpenDevice: open result is -1, (No such device) [ 32.311] ukiOpenDevice: Open failed [ 32.311] ukiOpenDevice: node name is /dev/ati/card10 [ 32.311] ukiOpenDevice: open result is -1, (No such device) [ 32.311] ukiOpenDevice: open result is -1, (No such device) [ 32.311] ukiOpenDevice: Open failed [ 32.311] ukiOpenDevice: node name is /dev/ati/card11 [ 32.311] ukiOpenDevice: open result is -1, (No such device) [ 32.311] ukiOpenDevice: open result is -1, (No such device) [ 32.311] ukiOpenDevice: Open failed [ 32.311] ukiOpenDevice: node name is /dev/ati/card12 [ 32.311] ukiOpenDevice: open result is -1, (No such device) [ 32.311] ukiOpenDevice: open result is -1, (No such device) [ 32.311] ukiOpenDevice: Open failed [ 32.311] ukiOpenDevice: node name is /dev/ati/card13 [ 32.311] ukiOpenDevice: open result is -1, (No such device) [ 32.311] ukiOpenDevice: open result is -1, (No such device) [ 32.311] ukiOpenDevice: Open failed [ 32.311] ukiOpenDevice: node name is /dev/ati/card14 [ 32.311] ukiOpenDevice: open result is -1, (No such device) [ 32.311] ukiOpenDevice: open result is -1, (No such device) [ 32.311] ukiOpenDevice: Open failed [ 32.311] ukiOpenDevice: node name is /dev/ati/card15 [ 32.311] ukiOpenDevice: open result is -1, (No such device) [ 32.311] ukiOpenDevice: open result is -1, (No such device) [ 32.311] ukiOpenDevice: Open failed [ 32.311] ukiDynamicMajor: found major device number 251 [ 32.311] ukiOpenByBusid: Searching for BusID PCI:1:0:0 [ 32.311] ukiOpenDevice: node name is /dev/ati/card0 [ 32.311] ukiOpenDevice: open result is 15, (OK) [ 32.311] ukiOpenByBusid: ukiOpenMinor returns 15 [ 32.311] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0 [ 32.892] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0 [ 32.893] ukiDynamicMajor: found major device number 251 [ 32.894] ukiDynamicMajor: found major device number 251 [ 32.894] ukiDynamicMajor: found major device number 251 [ 32.894] ukiOpenDevice: node name is /dev/ati/card0 [ 32.894] ukiOpenDevice: open result is 16, (OK) [ 32.894] ukiGetBusid returned 'PCI:1:0:0' [ 32.894] ukiOpenDevice: node name is /dev/ati/card1 [ 32.894] ukiOpenDevice: open result is -1, (No such device) [ 32.894] ukiOpenDevice: open result is -1, (No such device) [ 32.894] ukiOpenDevice: Open failed [ 32.894] ukiOpenDevice: node name is /dev/ati/card2 [ 32.894] ukiOpenDevice: open result is -1, (No such device) [ 32.894] ukiOpenDevice: open result is -1, (No such device) [ 32.894] ukiOpenDevice: Open failed [ 32.894] ukiOpenDevice: node name is /dev/ati/card3 [ 32.894] ukiOpenDevice: open result is -1, (No such device) [ 32.894] ukiOpenDevice: open result is -1, (No such device) [ 32.894] ukiOpenDevice: Open failed [ 32.894] ukiOpenDevice: node name is /dev/ati/card4 [ 32.894] ukiOpenDevice: open result is -1, (No such device) [ 32.894] ukiOpenDevice: open result is -1, (No such device) [ 32.894] ukiOpenDevice: Open failed [ 32.894] ukiOpenDevice: node name is /dev/ati/card5 [ 32.894] ukiOpenDevice: open result is -1, (No such device) [ 32.895] ukiOpenDevice: open result is -1, (No such device) [ 32.895] ukiOpenDevice: Open failed [ 32.895] ukiOpenDevice: node name is /dev/ati/card6 [ 32.895] ukiOpenDevice: open result is -1, (No such device) [ 32.895] ukiOpenDevice: open result is -1, (No such device) [ 32.895] ukiOpenDevice: Open failed [ 32.895] ukiOpenDevice: node name is /dev/ati/card7 [ 32.895] ukiOpenDevice: open result is -1, (No such device) [ 32.895] ukiOpenDevice: open result is -1, (No such device) [ 32.895] ukiOpenDevice: Open failed [ 32.895] ukiOpenDevice: node name is /dev/ati/card8 [ 32.895] ukiOpenDevice: open result is -1, (No such device) [ 32.895] ukiOpenDevice: open result is -1, (No such device) [ 32.895] ukiOpenDevice: Open failed [ 32.895] ukiOpenDevice: node name is /dev/ati/card9 [ 32.895] ukiOpenDevice: open result is -1, (No such device) [ 32.895] ukiOpenDevice: open result is -1, (No such device) [ 32.895] ukiOpenDevice: Open failed [ 32.895] ukiOpenDevice: node name is /dev/ati/card10 [ 32.895] ukiOpenDevice: open result is -1, (No such device) [ 32.895] ukiOpenDevice: open result is -1, (No such device) [ 32.895] ukiOpenDevice: Open failed [ 32.895] ukiOpenDevice: node name is /dev/ati/card11 [ 32.895] ukiOpenDevice: open result is -1, (No such device) [ 32.895] ukiOpenDevice: open result is -1, (No such device) [ 32.895] ukiOpenDevice: Open failed [ 32.895] ukiOpenDevice: node name is /dev/ati/card12 [ 32.895] ukiOpenDevice: open result is -1, (No such device) [ 32.895] ukiOpenDevice: open result is -1, (No such device) [ 32.895] ukiOpenDevice: Open failed [ 32.895] ukiOpenDevice: node name is /dev/ati/card13 [ 32.895] ukiOpenDevice: open result is -1, (No such device) [ 32.895] ukiOpenDevice: open result is -1, (No such device) [ 32.895] ukiOpenDevice: Open failed [ 32.895] ukiOpenDevice: node name is /dev/ati/card14 [ 32.895] ukiOpenDevice: open result is -1, (No such device) [ 32.896] ukiOpenDevice: open result is -1, (No such device) [ 32.896] ukiOpenDevice: Open failed [ 32.896] ukiOpenDevice: node name is /dev/ati/card15 [ 32.896] ukiOpenDevice: open result is -1, (No such device) [ 32.896] ukiOpenDevice: open result is -1, (No such device) [ 32.896] ukiOpenDevice: Open failed [ 32.896] ukiDynamicMajor: found major device number 251 [ 32.896] ukiOpenByBusid: Searching for BusID PCI:1:0:0 [ 32.896] ukiOpenDevice: node name is /dev/ati/card0 [ 32.896] ukiOpenDevice: open result is 16, (OK) [ 32.896] ukiOpenByBusid: ukiOpenMinor returns 16 [ 32.896] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0 [ 33.026] (II) fglrx(0): Setting screen physical size to 361 x 203 [ 33.657] (II) config/udev: Adding input device Power Button (/dev/input/event3) [ 33.657] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 33.657] (II) LoadModule: "evdev" [ 33.689] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 33.700] (II) Module evdev: vendor="X.Org Foundation" [ 33.700] compiled for 1.12.1, module version = 2.7.0 [ 33.700] Module class: X.Org XInput Driver [ 33.700] ABI class: X.Org XInput driver, version 16.0 [ 33.700] (II) Using input driver 'evdev' for 'Power Button' [ 33.700] (**) Power Button: always reports core events [ 33.700] (**) evdev: Power Button: Device: "/dev/input/event3" [ 33.700] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 33.700] (--) evdev: Power Button: Found keys [ 33.700] (II) evdev: Power Button: Configuring as keyboard [ 33.701] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3" [ 33.701] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 33.701] (**) Option "xkb_rules" "evdev" [ 33.701] (**) Option "xkb_model" "pc105" [ 33.701] (**) Option "xkb_layout" "pl" [ 33.775] (II) config/udev: Adding input device Video Bus (/dev/input/event8) [ 33.775] (**) Video Bus: Applying InputClass "evdev keyboard catchall" [ 33.775] (II) Using input driver 'evdev' for 'Video Bus' [ 33.775] (**) Video Bus: always reports core events [ 33.775] (**) evdev: Video Bus: Device: "/dev/input/event8" [ 33.775] (--) evdev: Video Bus: Vendor 0 Product 0x6 [ 33.775] (--) evdev: Video Bus: Found keys [ 33.775] (II) evdev: Video Bus: Configuring as keyboard [ 33.775] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input8/event8" [ 33.775] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7) [ 33.775] (**) Option "xkb_rules" "evdev" [ 33.775] (**) Option "xkb_model" "pc105" [ 33.775] (**) Option "xkb_layout" "pl" [ 33.776] (II) config/udev: Adding input device Power Button (/dev/input/event1) [ 33.776] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 33.776] (II) Using input driver 'evdev' for 'Power Button' [ 33.776] (**) Power Button: always reports core events [ 33.776] (**) evdev: Power Button: Device: "/dev/input/event1" [ 33.776] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 33.776] (--) evdev: Power Button: Found keys [ 33.776] (II) evdev: Power Button: Configuring as keyboard [ 33.776] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0C:00/input/input1/event1" [ 33.776] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8) [ 33.776] (**) Option "xkb_rules" "evdev" [ 33.776] (**) Option "xkb_model" "pc105" [ 33.776] (**) Option "xkb_layout" "pl" [ 33.777] (II) config/udev: Adding input device Video Bus (/dev/input/event7) [ 33.777] (**) Video Bus: Applying InputClass "evdev keyboard catchall" [ 33.777] (II) Using input driver 'evdev' for 'Video Bus' [ 33.777] (**) Video Bus: always reports core events [ 33.777] (**) evdev: Video Bus: Device: "/dev/input/event7" [ 33.777] (--) evdev: Video Bus: Vendor 0 Product 0x6 [ 33.777] (--) evdev: Video Bus: Found keys [ 33.777] (II) evdev: Video Bus: Configuring as keyboard [ 33.777] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2c/LNXVIDEO:00/input/input7/event7" [ 33.777] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 9) [ 33.777] (**) Option "xkb_rules" "evdev" [ 33.777] (**) Option "xkb_model" "pc105" [ 33.777] (**) Option "xkb_layout" "pl" [ 33.777] (II) config/udev: Adding input device Lid Switch (/dev/input/event2) [ 33.777] (II) No input driver specified, ignoring this device. [ 33.777] (II) This device may have been added with another device file. [ 33.778] (II) config/udev: Adding input device ELAN Touchscreen (/dev/input/event12) [ 33.778] (**) ELAN Touchscreen: Applying InputClass "evdev touchscreen catchall" [ 33.778] (II) Using input driver 'evdev' for 'ELAN Touchscreen' [ 33.778] (**) ELAN Touchscreen: always reports core events [ 33.778] (**) evdev: ELAN Touchscreen: Device: "/dev/input/event12" [ 33.778] (--) evdev: ELAN Touchscreen: Vendor 0x4f3 Product 0x34 [ 33.778] (--) evdev: ELAN Touchscreen: Found absolute axes [ 33.778] (--) evdev: ELAN Touchscreen: Found x and y absolute axes [ 33.778] (--) evdev: ELAN Touchscreen: Found absolute touchscreen [ 33.778] (II) evdev: ELAN Touchscreen: Configuring as touchscreen [ 33.778] (**) evdev: ELAN Touchscreen: YAxisMapping: buttons 4 and 5 [ 33.778] (**) evdev: ELAN Touchscreen: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 33.778] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/input/input12/event12" [ 33.778] (II) XINPUT: Adding extended input device "ELAN Touchscreen" (type: TOUCHSCREEN, id 10) [ 33.778] (II) evdev: ELAN Touchscreen: initialized for absolute axes. [ 33.778] (**) ELAN Touchscreen: (accel) keeping acceleration scheme 1 [ 33.778] (**) ELAN Touchscreen: (accel) acceleration profile 0 [ 33.778] (**) ELAN Touchscreen: (accel) acceleration factor: 2.000 [ 33.778] (**) ELAN Touchscreen: (accel) acceleration threshold: 4 [ 33.779] (II) config/udev: Adding input device ELAN Touchscreen (/dev/input/mouse1) [ 33.779] (II) No input driver specified, ignoring this device. [ 33.779] (II) This device may have been added with another device file. [ 33.779] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event10) [ 33.779] (II) No input driver specified, ignoring this device. [ 33.779] (II) This device may have been added with another device file. [ 33.779] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event11) [ 33.779] (II) No input driver specified, ignoring this device. [ 33.779] (II) This device may have been added with another device file. [ 33.779] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event9) [ 33.779] (II) No input driver specified, ignoring this device. [ 33.779] (II) This device may have been added with another device file. [ 33.780] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0) [ 33.780] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [ 33.780] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard' [ 33.780] (**) AT Translated Set 2 keyboard: always reports core events [ 33.780] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0" [ 33.780] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1 [ 33.780] (--) evdev: AT Translated Set 2 keyboard: Found keys [ 33.780] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard [ 33.780] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0" [ 33.780] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11) [ 33.780] (**) Option "xkb_rules" "evdev" [ 33.780] (**) Option "xkb_model" "pc105" [ 33.780] (**) Option "xkb_layout" "pl" [ 33.780] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event6) [ 33.780] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall" [ 33.781] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall" [ 33.781] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons" [ 33.781] (II) LoadModule: "synaptics" [ 33.781] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so [ 33.819] (II) Module synaptics: vendor="X.Org Foundation" [ 33.819] compiled for 1.12.4, module version = 1.6.2 [ 33.819] Module class: X.Org XInput Driver [ 33.819] ABI class: X.Org XInput driver, version 16.0 [ 33.819] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad' [ 33.819] (**) SynPS/2 Synaptics TouchPad: always reports core events [ 33.819] (**) Option "Device" "/dev/input/event6" [ 33.880] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5674 [ 33.880] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4754 [ 33.880] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255 [ 33.880] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15 [ 33.880] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple [ 33.880] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7 [ 33.880] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found [ 33.880] (**) SynPS/2 Synaptics TouchPad: always reports core events [ 33.936] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input6/event6" [ 33.936] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12) [ 33.936] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5 [ 33.936] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75 [ 33.936] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.037 [ 33.936] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1 [ 33.936] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1 [ 33.936] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000 [ 33.936] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4 [ 33.936] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found [ 33.936] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0) [ 33.936] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates" [ 33.937] (II) config/udev: Adding input device PC Speaker (/dev/input/event4) [ 33.937] (II) No input driver specified, ignoring this device. [ 33.937] (II) This device may have been added with another device file. [ 33.937] (II) config/udev: Adding input device ACPI Virtual Keyboard Device (/dev/input/event13) [ 33.937] (**) ACPI Virtual Keyboard Device: Applying InputClass "evdev keyboard catchall" [ 33.937] (II) Using input driver 'evdev' for 'ACPI Virtual Keyboard Device' [ 33.937] (**) ACPI Virtual Keyboard Device: always reports core events [ 33.937] (**) evdev: ACPI Virtual Keyboard Device: Device: "/dev/input/event13" [ 33.937] (--) evdev: ACPI Virtual Keyboard Device: Vendor 0 Product 0 [ 33.937] (--) evdev: ACPI Virtual Keyboard Device: Found keys [ 33.937] (II) evdev: ACPI Virtual Keyboard Device: Configuring as keyboard [ 33.937] (**) Option "config_info" "udev:/sys/devices/virtual/input/input13/event13" [ 33.937] (II) XINPUT: Adding extended input device "ACPI Virtual Keyboard Device" (type: KEYBOARD, id 13) [ 33.937] (**) Option "xkb_rules" "evdev" [ 33.937] (**) Option "xkb_model" "pc105" [ 33.937] (**) Option "xkb_layout" "pl" [ 33.938] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event5) [ 33.938] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall" [ 33.938] (II) Using input driver 'evdev' for 'Dell WMI hotkeys' [ 33.938] (**) Dell WMI hotkeys: always reports core events [ 33.938] (**) evdev: Dell WMI hotkeys: Device: "/dev/input/event5" [ 33.938] (--) evdev: Dell WMI hotkeys: Vendor 0 Product 0 [ 33.938] (--) evdev: Dell WMI hotkeys: Found keys [ 33.938] (II) evdev: Dell WMI hotkeys: Configuring as keyboard [ 33.938] (**) Option "config_info" "udev:/sys/devices/virtual/input/input5/event5" [ 33.938] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 14) [ 33.938] (**) Option "xkb_rules" "evdev" [ 33.938] (**) Option "xkb_model" "pc105" [ 33.938] (**) Option "xkb_layout" "pl" [ 33.968] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments [ 33.994] (II) fglrx(0): EDID vendor "LGD", prod id 991 [ 33.994] (II) fglrx(0): Printing DDC gathered Modelines: [ 33.994] (II) fglrx(0): Modeline "1366x768"x0.0 76.75 1366 1414 1446 1618 768 771 776 790 +hsync -vsync (47.4 kHz eP) [ 33.994] (II) fglrx(0): Modeline "1366x768"x0.0 51.16 1366 1414 1446 1618 768 771 776 790 +hsync -vsync (31.6 kHz e) [ 38.760] (II) fglrx(0): EDID vendor "LGD", prod id 991 [ 38.760] (II) fglrx(0): Printing DDC gathered Modelines: [ 38.760] (II) fglrx(0): Modeline "1366x768"x0.0 76.75 1366 1414 1446 1618 768 771 776 790 +hsync -vsync (47.4 kHz eP) [ 38.760] (II) fglrx(0): Modeline "1366x768"x0.0 51.16 1366 1414 1446 1618 768 771 776 790 +hsync -vsync (31.6 kHz e) [ 52.310] (II) fglrx(0): EDID vendor "LGD", prod id 991 [ 52.310] (II) fglrx(0): Printing DDC gathered Modelines: [ 52.310] (II) fglrx(0): Modeline "1366x768"x0.0 76.75 1366 1414 1446 1618 768 771 776 790 +hsync -vsync (47.4 kHz eP) [ 52.310] (II) fglrx(0): Modeline "1366x768"x0.0 51.16 1366 1414 1446 1618 768 771 776 790 +hsync -vsync (31.6 kHz e) [ 53.547] (II) fglrx(0): EDID vendor "LGD", prod id 991 [ 53.547] (II) fglrx(0): Printing DDC gathered Modelines: [ 53.547] (II) fglrx(0): Modeline "1366x768"x0.0 76.75 1366 1414 1446 1618 768 771 776 790 +hsync -vsync (47.4 kHz eP) [ 53.547] (II) fglrx(0): Modeline "1366x768"x0.0 51.16 1366 1414 1446 1618 768 771 776 790 +hsync -vsync (31.6 kHz e) [ 56.299] (II) fglrx(0): EDID vendor "LGD", prod id 991 [ 56.299] (II) fglrx(0): Printing DDC gathered Modelines: [ 56.299] (II) fglrx(0): Modeline "1366x768"x0.0 76.75 1366 1414 1446 1618 768 771 776 790 +hsync -vsync (47.4 kHz eP) [ 56.299] (II) fglrx(0): Modeline "1366x768"x0.0 51.16 1366 1414 1446 1618 768 771 776 790 +hsync -vsync (31.6 kHz e)
Myśle by spróbować na sida jeszcez raz... ale sie boje ze mi sie rozjedzie wszystko...
Jednak myślę nad Jessie, jednak sie boje że strace gnome shell itp.... kiedyś już tak miałem, jak to najlepiej wykonać?
To chyba najlepiej rozwiąże moje problemy....
Ostatnio edytowany przez Kovciu (2013-10-13 19:55:34)
Offline
Czyżby sprawa nie do rozwiązania?
pozdrawiam
Offline
Z ciekawości, co do wiatraka.
Na windowsie ten problem też występuje?
Znany mi przypadek della inspirona 3521, gdzie takie coś się na windowsie działo.
Problem rozwiązała aktualizacja biosu.
Offline
Witam,
no właśnie z tego co pracowalem na windzie troszku to tego nie było, tylko na linuxie..... na linku tez to jest tak ze raz szumi ciagle, raz faktycznie jak potrzeba, czasem sie zalacza dopiero przy 55st.... potem ciagle chodzi.... nie moge znaleźć przyczyny szumu... to mnie boli.... sprobuje zaktualizowac bios, moze to coś da... bo mnie k. bierze jak slysze ten szum i męczy przez to by isc na 7ke... czego poprostu nie chce! Tylko jak linuxa ogarnac do konca... Ciagle mysle by isc na testing, lecz jak robie dist-upgrade to pokazuje ze wywali gnoma shell, czyli sie nie ogarnę..... nie wiem jak to ugryźć poprostu przez to daje posty na forum...
EDIT:
małe pytanie... jak ja mam zaktualizowac bios
http://www.dell.com/support/drivers/pl/pl/pldhs1/Dr … categoryId=BI
bo za ... nie wiem ;/ (pod winda bez problemu ale debianem?!)
pozdr
Ostatnio edytowany przez Kovciu (2013-10-15 00:18:55)
Offline
Zdecyduj się czy to występowało również na Windowsie. Wtedy byłaby to jakaś wina sprzętu.
Bios pewnie da się zaktualizować za pomocą jakiejś narzędziowej płytki.
Miałeś sprawdzić tamte wpisy, najlepiej na wersji testowej i jakimś gotowym jądrze.
Offline
Ta, zrobie sobie wersje testową by zraz wywalic calego debiana i całą resztą bo jak zwykle testówka mi rozwali wszystko od początku do końca, albo zrobi tak ze ja sie nie ogarnę -> przez to było moje pytanie czy to tylko mi tak sie rozwala czy to normalne i trzeba pakiety kompletować potem.
Co do pracy na widowsie napisałem że "no właśnie z tego co pracowalem na windzie troszku to tego nie było" = pracowałem troszkę na windowsie to tego nie było, chodził cicho. On ma poprostu jakieś wiksy z tym wiatraczkiem, bo teraz czuje że ciepły a się nie załącza, a jest tak że jest chłodny a wiatrak dalej swoje.
pozdrawiam
Offline
W logach masz nieskonfigurowane /etc/default/cpufrequtils
Podaj jako root z konsoli
cpufreq-info
Mój z cpufrequtilis przedstawiam niżej.
ENABLE="true"
GOVERNOR="powersave"
MIN_SPEED=800.
Cyrki z temperaturami i obrotami wiatraka miałem z kernelem 3.11.1 i 3.11.2 na lapku asusa z prockiem intela driver: intel_pstate . Ostatnio coś poprawili i na poniższych jest o.k. nawet temp mam o 2 st. są niższe.
Linux asus-1505 3.11-3.dmz.1-liquorix-amd64 #1 ZEN SMP PREEMPT Tue Oct 15 03:26:12 UTC 2013 x86_64 GNU/Linux
Linux asus-1505 3.11-4.dmz.1-liquorix-amd64 #1 ZEN SMP PREEMPT Tue Oct 15 03:26:12 UTC 2013 x86_64 GNU/Linux
Pozdrawiam
Offline
root@anon:/home/anon# cpufreq-info cpufrequtils 008: cpufreq-info (C) Dominik Brodowski 2004-2009 Report errors and bugs to cpufreq@vger.kernel.org, please. analyzing CPU 0: driver: intel_pstate CPUs which run at the same hardware frequency: 0 CPUs which need to have their frequency coordinated by software: 0 maximum transition latency: 0.97 ms. hardware limits: 800 MHz - 2.70 GHz available cpufreq governors: performance, powersave current policy: frequency should be within 800 MHz and 2.70 GHz. The governor "powersave" may decide which speed to u se within this range. current CPU frequency is 2.38 GHz (asserted by call to hardware). analyzing CPU 1: driver: intel_pstate CPUs which run at the same hardware frequency: 1 CPUs which need to have their frequency coordinated by software: 1 maximum transition latency: 0.97 ms. hardware limits: 800 MHz - 2.70 GHz available cpufreq governors: performance, powersave current policy: frequency should be within 800 MHz and 2.70 GHz. The governor "powersave" may decide which speed to u se within this range. current CPU frequency is 2.43 GHz (asserted by call to hardware). analyzing CPU 2: driver: intel_pstate CPUs which run at the same hardware frequency: 2 CPUs which need to have their frequency coordinated by software: 2 maximum transition latency: 0.97 ms. hardware limits: 800 MHz - 2.70 GHz available cpufreq governors: performance, powersave current policy: frequency should be within 800 MHz and 2.70 GHz. The governor "powersave" may decide which speed to u se within this range. current CPU frequency is 2.63 GHz (asserted by call to hardware). analyzing CPU 3: driver: intel_pstate CPUs which run at the same hardware frequency: 3 CPUs which need to have their frequency coordinated by software: 3 maximum transition latency: 0.97 ms. hardware limits: 800 MHz - 2.70 GHz available cpufreq governors: performance, powersave current policy: frequency should be within 800 MHz and 2.70 GHz. The governor "powersave" may decide which speed to u se within this range. current CPU frequency is 2.12 GHz (asserted by call to hardware).
Co do info z cpufrequtilis, niestety nie widze tego, bo jak spojrzalem w /etc/cpufreqd.conf to zupelnie co innego, były tam podane profile działania.
Niestety teraz jak przejde na jajo stabilne w squezze to mi grafa wywali itp, niestety z góry jestem zmuszony mieć świeże, bo jak pisalem wcześniej, na starszym jajku ani grafy nie szło zainstalować, ani dotyk nie działał... masakra....
Nadal nie wiem jak to wykonac z przejsciem na jessie/sid
pozdrawiam
Offline
cpufrequtilis tworzysz jako root w ulubionym edytorze tekstowym i umieszczasz w /etc/default/
Wklejasz zawartość mojego configu do swojego - podanego we wcześniejszym poście i wykonujesz jako root żeby nie restartować kompa:
/etc/init.d/cpufrequtilis restart
P.S. Mocno masz obciążonego lapka, bo masz wysokie częstotliwości na rdzeniach i tym samym pewnie wiatrak głośno chodzi.
Ostatnio edytowany przez Andrzej66 (2013-10-15 20:50:29)
Offline
Takie info po restarcie, wszystko ok?
root@anon:~# /etc/init.d/cpufrequtils restart [....] CPUFreq Utilities: Setting ondemand CPUFreq governor...disabled[ ok ernor not available...done.
No tylko jak go odciążyć? mysle by jakos go zupgradowac przez dist-upgrade do jessie lub sid... ale sam nie wiem... jak to wykonac to mnie martwi... czy walnac upgrade a potem doinstalowac gnome itp?
pozdr
Offline
Miałeś zainstalować normalny kernel a nie swoje wynalazki.
ondemand już nie ma dla tego procesora.
Ludzie używają sida i nic się nie wywala, więc tym bardziej wersja testowa nie powinna.
Zrób porządek z systemem bo tak to nie ma prawa działać.
I podaj jakieś konkrety bo nikt nie będzie zgadywał o co chodzi z tym wywalanym Gnome.
Offline
Ok, to robie aktualizacje do testing, ale licze na Ciebie @yossarian ze pomozesz :D jak cos mi tam wyleci :)
pozdrawiam :)
Offline
Wystarczy czytać co system „mówi”.
Sam niczego nie wywala bez zgody użyszkodnika.
Offline
cos takiego narazie wypisał przed aktu, wszystko zaakceptowałem
Następujące NOWE pakiety zostaną zainstalowane: aglfn{a} apache2-bin blender-data{a} cpp-4.8{a} cups-browsed{a} cups-daemon{a} cups-server-common{a} dconf-cli{a} dconf-editor{a} dh-python{a} diffstat{a} eclipse-cdt-profiling-framework{a} ethtool{a} five-or-more{a} fonts-dejavu{a} fonts-dejavu-core{a} fonts-dejavu-extra{a} four-in-a-row{a} g++-4.8{a} gawk{a} gcc-4.8{a} gcc-4.8-base{a} geoclue-nominatim{a} gfortran-4.8{a} gir1.2-clutter-gst-2.0{a} gir1.2-gnomedesktop-3.0{a} gir1.2-gst-plugins-base-1.0{a} gir1.2-gstreamer-1.0{a} gir1.2-rest-0.7{a} gir1.2-tracker-0.16{a} gir1.2-zpj-0.0{a} gnome-calculator{a} gnome-chess{a} gnome-klotski{a} gnome-mahjongg{a} gnome-mines{a} gnome-nibbles{a} gnome-packagekit-session{a} gnome-robots{a} gnome-tetravex{a} gnupg-agent{a} gnupg2{a} gnustep-base-common{a} gnustep-base-runtime{a} gnustep-common{a} grilo-plugins-0.2{a} gstreamer1.0-clutter{a} gstreamer1.0-libav{a} gstreamer1.0-nice{a} gstreamer1.0-plugins-bad{a} gstreamer1.0-plugins-base{a} gstreamer1.0-plugins-good{a} gstreamer1.0-plugins-ugly{a} gstreamer1.0-pulseaudio{a} gstreamer1.0-x{a} gtk2-engines-pixbuf{a} hardening-includes{a} icedtea-7-jre-jamvm{a} init-system-helpers{a} iproute2 javascript-common{a} libapt-pkg-perl{a} libarchive-extract-perl{a} libarchive-zip-perl{a} libarchive13{a} libasan0{a} libasound2-data{a} libasprintf-dev{a} libassuan0{a} libatm1{a} libatomic1{a} libaudit-common{a} libaudit1{a} libauthen-sasl-perl{a} libautodie-perl{a} libavresample1{a} libavutil52{a} libboost-chrono1.54.0{a} libboost-date-time1.49.0{a} libboost-date-time1.54.0{a} libboost-filesystem1.54.0{a} libboost-iostreams1.54.0{a} libboost-locale1.54.0{a} libboost-program-options1.54.0{a} libboost-regex1.54.0{a} libboost-system1.54.0{a} libboost-thread1.54.0{a} libbrlapi0.6{a} libcamel-1.2-43{a} libcdr-0.0-0{a} libcheese-gtk23{a} libcheese7{a} libclass-accessor-perl{a} libclone-perl{a} libcloog-isl4{a} libcloog-ppl1{a} libclucene-contribs1{a} libclucene-core1{a} libclutter-gst-2.0-0{a} libcmis-0.3-3{a} libcogl-pango12{a} libcogl12{a} libcolord-gtk1{a} libcolorhug1{a} libcommons-io-java{a} libdconf1{a} libdigest-hmac-perl{a} libdrm-nouveau2{a} libebackend-1.2-6{a} libebook-1.2-14{a} libebook-contacts-1.2-0{a} libecal-1.2-15{a} libedata-book-1.2-17{a} libedata-cal-1.2-20{a} libedataserver-1.2-17{a} libee0{a} libelfg0{a} libemail-valid-perl{a} libestr0{a} libexttextcat-2.0-0{a} libfarstream-0.2-2{a} libffi6{a} libfftw3-double3{a} libfftw3-single3{a} libfltk-gl1.3{a} libfltk1.3{a} libfluidsynth1{a} libfontembed1{a} libgcc-4.7-dev{a} libgcc-4.8-dev{a} libgcr-base-3-1{a} libgcr-ui-3-1{a} libgd3{a} libgee-0.8-2{a} libgettextpo-dev{a} libgexiv2-2{a} libgfortran-4.8-dev{a} libgjs0c{ab} libgmpxx4ldbl{a} libgnome-bluetooth11{a} libgnomekbd8{a} libgnustep-base1.22{a} libgnutls-openssl27{a} libgnutls28{a} libgraphite2-3{a} libgrilo-0.2-1{a} libgstreamer-plugins-bad1.0-0{a} libgstreamer-plugins-base1.0-0{a} libgstreamer1.0-0{a} libgtkglext1{a} libgtksourceview-3.0-1{a} libgupnp-dlna-2.0-3{a} libgweather-3-3{a} libharfbuzz-icu0{a} libharfbuzz0a{a} libhogweed2{a} libhsqldb1.8.0-java{a} libhtml-template-perl{a} libintl-perl{a} libio-html-perl{a} libio-pty-perl{a} libio-socket-inet6-perl{a} libio-string-perl{a} libipc-run-perl{a} libipc-system-simple-perl{a} libisl10{a} libisorelax-java{a} libjavaewah-java{a} libjemalloc1{a} libjs-jquery{a} libjson-c2{a} libjson-glib-1.0-common{a} libjzlib-java{a} libksba8{a} liblangtag-common{a} liblangtag1{a} liblist-moreutils-perl{a} libllvm3.2{a} liblog-message-simple-perl{a} liblognorm0{a} liblua5.2-0{a} liblzo2-2{a} libmnl0{a} libmodule-pluggable-perl{a} libmpc3{a} libmpg123-0{a} libmspub-0.0-0{a} libmsv-java{a} libmwaw-0.1-1{a} libnet-dns-perl{a} libnet-domain-tld-perl{a} libnet-ip-perl{a} libnet-smtp-ssl-perl{a} libobjc4{a} libodfgen-0.0-0{a} libopencv-core2.4{a} libopencv-highgui2.4{a} libopencv-imgproc2.4{a} libopenimageio1.2{a} liborcus-0.6-0{a} libpackagekit-glib2-16{a} libpango-1.0-0{a} libpangocairo-1.0-0{a} libpangoft2-1.0-0{a} libpangox-1.0-0 libpangoxft-1.0-0 libparse-debianchangelog-perl{a} libperl4-corelibs-perl{a} libperl5.18{a} libperlio-gzip-perl{a} libpod-latex-perl{a} libppl-c4{a} libppl12{a} libpulsedsp{a} libpython-stdlib{a} libpython2.7-minimal{a} libpython2.7-stdlib{a} libpython3-stdlib{a} libpython3.3{a} libpython3.3-minimal{a} libpython3.3-stdlib{a} libqpdf13{a} libraw9{a} librelaxng-datatype-java{a} librhythmbox-core8{a} librygel-core-2.0-1{a} librygel-renderer-2.0-1{a} librygel-renderer-gst-2.0-1{a} librygel-server-2.0-1{a} libsecret-1-0{a} libsecret-common{a} libserf1{a} libsigsegv2{a} libsnmp30{a} libsocket6-perl{a} libspice-server1{a} libspnav0{a} libstdc++-4.8-dev{a} libsub-identify-perl{a} libsub-name-perl{a} libtasn1-6{a} libtbb2{a} libtelepathy-farstream3{a} libtelepathy-logger3{a} libterm-ui-perl{a} libtevent0{a} libtext-levenshtein-perl{a} libtext-soundex-perl{a} libtext-unidecode-perl{a} libtiff5{a} libtracker-extract-0.16-0{a} libtracker-miner-0.16-0{a} libtracker-sparql-0.16-0{a} libtsan0{a} libtxc-dxtn0{a} libudev1{a} libudisks2-0{a} libwayland-client0{a} libwayland-server0{a} libwebp4{a} libx264-133{a} libx264-138{a} libxatracker1{a} libxml-libxml-perl{a} libxml-namespacesupport-perl{a} libxml-sax-base-perl{a} libxml-sax-expat-perl{a} libxml-sax-perl{a} libxml-simple-perl{a} libxtables10{a} libytnef0{a} libzapojit-0.0-0{a} libzeitgeist-1.0-1{a} lintian{a} linux-image-3.10-3-amd64{a} openjdk-7-jdk{a} openjdk-7-jre{a} openjdk-7-jre-headless{a} openjdk-7-jre-lib{a} p11-kit{a} patchutils{a} pinentry-gtk2{a} python-lxml{a} python-six{a} python3{a} python3-apt{a} python3-aptdaemon{a} python3-aptdaemon.gtk3widgets{a} python3-dbus{a} python3-defer{a} python3-gi{a} python3-minimal{a} python3-packagekit{a} python3-pkg-resources{a} python3-software-properties{a} python3-uno{ab} python3.3{a} python3.3-minimal{a} qpdf{a} qtcore4-l10n{a} rfkill{a} t1utils{a} tali{a} transfig{a} udisks2{a} unar{a} xserver-xorg-video-modesetting{a} xserver-xorg-video-qxl{a} Następujące pakiety zostaną USUNIĘTE: apache2.2-bin{u} eclipse-rse{u} evolution-webcal{u} fuse-utils{u} g++-4.7{u} gcalctool{u} geoclue-yahoo{u} gfortran-4.7{u} gir1.2-clutter-gst-1.0{u} gir1.2-folks-0.6{u} gir1.2-gee-1.0{u} gir1.2-gst-plugins-base-0.10{u} gir1.2-tracker-0.14{u} git{u} git-man{u} glchess{u} glines{u} gnect{u} gnibbles{u} gnobots2{u} gnome-games-data{u} gnome-games-extra-data{u} gnomine{u} gnotravex{u} gnotski{u} grilo-plugins-0.1{u} gtali{u} libarchive12{u} libatk-adaptor-data{u} libaudit0{u} libbackport-util-concurrent-java{u} libboost-program-options1.49.0{u} libboost-thread1.49.0{u} libbrlapi0.5{u} libcamel-1.2-33{u} libcheese-gtk21{u} libcheese3{u} libclutter-gst-1.0-0{u} libclutter-imcontext-0.1-0{u} libclutter-imcontext-0.1-bin{u} libcluttergesture-0.0.2-0{u} libcmis-0.2-0{u} libcogl-pango0{u} libcogl9{u} libcommons-net2-java{u} libcupsdriver1{u} libdconf0{u} libdrm-nouveau1a{u} libebackend-1.2-2{u} libebook-1.2-13{u} libecal-1.2-11{u} libedata-book-1.2-13{u} libedata-cal-1.2-15{u} libedataserver-1.2-16{u} libedataserverui-3.0-1{u} libelf1{u} libepc-1.0-3{u} libepc-common{u} libepc-ui-1.0-3{u} liberror-perl{u} libescpr1{u} libexttextcat0{u} libfltk1.1{u} libgd2-xpm{u} libgexiv2-1{u} libgnome-bluetooth10{u} libgnomekbd7{u} libgnujaf-java{u} libgraphite2-2.0.0{u} libgrilo-0.1-0{u} libgtksourceview-3.0-0{u} libgupnp-dlna-1.0-2{u} libgweather-3-0{u} libhsqldb-java{u} libibverbs1{u} libjaxme-java{u} libjson0{u} libmpc2{u} libmx-1.0-2{u} libmx-bin{u} libmx-common{u} libnuma1{u} libopenmpi1.3{u} libopenraw1{u} libpackagekit-glib2-14{u} libparpack2{u} libperl5.14{u} libpthread-stubs0{u} libpython3.2{u} libraw5{u} libreoffice-emailmerge{u} libreoffice-filter-binfilter{u} libreoffice-filter-mobiledev{u} librhythmbox-core6{u} libslp1{u} libsnmp15{u} libstdc++6-4.7-dev{u} libsystemd-daemon0{u} libtelepathy-farstream2{u} libtelepathy-logger2{u} libtidy-0.99-0{u} libtorque2{u} libtracker-extract-0.14-0{u} libtracker-miner-0.14-0{u} libtracker-sparql-0.14-0{u} libvte-common{u} libvte9{u} libwayland0{u} libwebp2{u} libx264-123{u} libx264-132{u} mahjongg{u} python-aptdaemon{u} python-aptdaemon.gtk3widgets{u} python-beautifulsoup{u} python-defer{u} python-feedparser{u} python-gnupginterface{u} python-httplib2{u} python-libxml2{u} python-packagekit{u} python-pkg-resources{u} python-pycurl{u} python-software-properties{u} python-utidylib{u} python3.2{u} python3.2-minimal{u} rsync{u} ttf-liberation{u} ttf-sil-gentium-basic{u} Następujące pakiety zostaną zaktualizowane: accountsservice acl acpi-fakekey acpi-support acpi-support-base acpid aisleriot alacarte alsa-base alsa-utils ant ant-optional apt apt-utils apt-xapian-index aptdaemon aptdaemon-data aptitude aptitude-common argyll at at-spi2-core autoconf automake autopoint autotools-dev baobab base-files base-passwd bash bc bind9-host binfmt-support binutils blender bluefish bluefish-data bluefish-plugins bluetooth bluez bluez-alsa bluez-cups bluez-gstreamer bogofilter bogofilter-bdb bogofilter-common bootlogd brasero brasero-common browser-plugin-gnash bsdmainutils bsdutils build-essential busybox bzip2 ca-certificates ca-certificates-java caribou caribou-antler cdbs cdrdao cheese cheese-common chromium chromium-inspector colord console-setup console-setup-linux consolekit coreutils cpio cpp cpp-4.7 cryptsetup-bin cups cups-bsd cups-client cups-common cups-filters cups-pk-helper cups-ppdc db5.1-util dbus dbus-x11 dc dconf-gsettings-backend dconf-service dconf-tools debconf debconf-i18n debian-faq debian-keyring debianutils default-jdk default-jre default-jre-headless desktop-file-utils dictionaries-common diffutils discover-data dmidecode dmsetup dnsmasq-base dnsutils dosfstools e2fslibs e2fsprogs eclipse eclipse-anyedit eclipse-cdt eclipse-cdt-autotools eclipse-cdt-jni eclipse-cdt-pkg-config eclipse-cdt-valgrind eclipse-egit eclipse-emf eclipse-jdt eclipse-mylyn eclipse-mylyn-builds-hudson eclipse-mylyn-context-cdt eclipse-mylyn-context-jdt eclipse-mylyn-context-pde eclipse-mylyn-tasks-bugzilla eclipse-mylyn-tasks-trac eclipse-mylyn-versions-cvs eclipse-mylyn-wikitext eclipse-pde eclipse-platform eclipse-platform-data eclipse-rcp ekg2 ekg2-core ekg2-dbg ekg2-jabber ekg2-ui-ncurses empathy empathy-common enchant eog espeak-data evince evince-common evolution evolution-common evolution-data-server evolution-data-server-common evolution-plugins exfat-fuse exfat-utils exim4 exim4-base exim4-config exim4-daemon-light extlinux fastjar file file-roller findutils folks-common fontconfig fontconfig-config fonts-cantarell fonts-droid fonts-lyx fonts-opensymbol foomatic-db-compressed-ppds foomatic-db-engine fosfat fosfat-dev ftp fuse fusefat g++ gcc gcc-4.7 gcc-4.7-base gconf-service gconf2 gconf2-common gcr gdb gdbserver gdebi gdebi-core gdm3 gedit gedit-common gedit-plugins geoclue geoclue-hostip geoclue-localnet geoclue-manual geoip-database gettext gettext-base gfortran ghostscript ghostscript-cups gimp gimp-data gimp-ufraw gir1.2-accountsservice-1.0 gir1.2-atk-1.0 gir1.2-atspi-2.0 gir1.2-caribou-1.0 gir1.2-clutter-1.0 gir1.2-cogl-1.0 gir1.2-coglpango-1.0 gir1.2-evince-3.0 gir1.2-freedesktop gir1.2-gck-1 gir1.2-gconf-2.0 gir1.2-gcr-3 gir1.2-gdata-0.0 gir1.2-gdkpixbuf-2.0 gir1.2-gkbd-3.0 gir1.2-glib-2.0 gir1.2-gmenu-3.0 gir1.2-gnomebluetooth-1.0 gir1.2-goa-1.0 gir1.2-gtk-3.0 gir1.2-gtkclutter-1.0 gir1.2-gtksource-3.0 gir1.2-gtop-2.0 gir1.2-gucharmap-2.90 gir1.2-javascriptcoregtk-3.0 gir1.2-json-1.0 gir1.2-mutter-3.0 gir1.2-networkmanager-1.0 gir1.2-panelapplet-4.0 gir1.2-pango-1.0 gir1.2-peas-1.0 gir1.2-rb-3.0 gir1.2-soup-2.4 gir1.2-telepathyglib-0.12 gir1.2-telepathylogger-0.2 gir1.2-totem-1.0 gir1.2-totem-plparser-1.0 gir1.2-upowerglib-1.0 gir1.2-vte-2.90 gir1.2-webkit-3.0 gir1.2-wnck-3.0 gjs gkbd-capplet glib-networking glib-networking-common glib-networking-services gnash gnash-common gnome gnome-accessibility-themes gnome-applets gnome-applets-data gnome-backgrounds gnome-bluetooth gnome-color-manager gnome-contacts gnome-control-center gnome-control-center-data gnome-core gnome-desktop3-data gnome-dictionary gnome-documents gnome-font-viewer gnome-games gnome-icon-theme gnome-icon-theme-extras gnome-icon-theme-symbolic gnome-keyring gnome-menus gnome-nettool gnome-online-accounts gnome-packagekit gnome-packagekit-data gnome-panel gnome-panel-data gnome-power-manager gnome-screensaver gnome-screenshot gnome-settings-daemon gnome-shell gnome-shell-common gnome-sudoku gnome-sushi gnome-system-log gnome-system-monitor gnome-terminal gnome-terminal-data gnome-themes-standard gnome-themes-standard-data gnome-user-guide gnome-user-share gnuchess gnupg gnuplot gnuplot-x11 google-chrome-stable gparted gpgv grep groff groff-base gstreamer0.10-nice gstreamer0.10-plugins-ugly gucharmap guile-2.0-libs gvfs gvfs-backends gvfs-bin gvfs-common gvfs-daemons gvfs-libs gzip hdparm hostname hpijs hplip hplip-data hwdata hyphen-en-us iagno ifupdown imagemagick imagemagick-common info initramfs-tools initscripts inkscape install-info installation-report ipolish iproute iptables iputils-ping iputils-tracepath irssi isc-dhcp-client isc-dhcp-common iso-codes jarwrapper java-common junit4 kbd keyboard-configuration krb5-locales less libaa1 libaacs0 libaccountsservice0 libacl1 libalgorithm-diff-perl libalgorithm-diff-xs-perl libapache2-mod-dnssd libapr1 libaprutil1 libaprutil1-dbd-sqlite3 libaprutil1-ldap libapt-inst1.5 libapt-pkg4.12 libarpack2 libasm3-java libasound2 libasound2-plugins libasprintf0c2 libass4 libatasmart4 libatk-adaptor libatk-bridge2.0-0 libatk-wrapper-java libatk-wrapper-java-jni libatk1.0-0 libatk1.0-data libatkmm-1.6-1 libatlas3-base libatspi2.0-0 libattr1 libaudio2 libavcodec54 libavformat54 libaxis-java libbind9-80 libblas-dev libblas3 libblas3gf libblkid1 libbluetooth3 libbluray1 libbonobo2-0 libbonobo2-common libboost-iostreams1.49.0 libbrasero-media3-1 libbsd0 libburn4 libbz2-1.0 libbz2-dev libc-bin libc-dev-bin libc6 libc6-dbg libc6-dev libcairo-gobject2 libcairo-perl libcairo2 libcanberra-gtk-module libcanberra-gtk0 libcanberra-gtk3-0 libcanberra-gtk3-module libcanberra-pulse libcanberra0 libcap-ng0 libcaribou-common libcaribou-gtk-module libcaribou-gtk3-module libcaribou0 libcdaudio1 libcdparanoia0 libchamplain-0.12-0 libchamplain-gtk-0.12-0 libck-connector0 libclass-isa-perl libclutter-1.0-0 libclutter-1.0-common libclutter-gtk-1.0-0 libcogl-common libcolord1 libcomerr2 libcommons-beanutils-java libcommons-codec-java libcommons-collections3-java libcommons-compress-java libcommons-digester-java libcommons-logging-java libcommons-pool-java libcroco3 libcryptsetup4 libcups2 libcupscgi1 libcupsfilters1 libcupsimage2 libcupsmime1 libcupsppdc1 libcurl3 libcurl3-gnutls libdatrie1 libdb5.1 libdb5.1-java libdb5.1-java-jni libdbus-1-3 libdc1394-22 libdca0 libdevmapper-event1.02.1 libdevmapper1.02.1 libdiscid0 libdjvulibre-text libdjvulibre21 libdmapsharing-3.0-2 libdns88 libdom4j-java libdrm-intel1 libdrm-radeon1 libdrm2 libdvdnav4 libdvdread4 libeasymock-java libecj-java libedit2 libegl1-mesa libegl1-mesa-drivers libenca0 libenchant1c2a libequinox-osgi-java libespeak1 libevdocument3-4 libevent-2.0-5 libevolution libevview3-3 libexempi3 libexif12 libexpat1 libexttextcat-data libfdk-aac0 libfftw3-3 libfile-fcntllock-perl libfile-mimeinfo-perl libflac8 libflite1 libfolks-eds25 libfolks-telepathy25 libfolks25 libfontconfig1 libfontenc1 libfosfat0 libfosgra0 libfribidi0 libfs6 libfuse2 libgail-3-0 libgail-common libgail18 libgbm1 libgc1c2 libgcc1 libgck-1-0 libgconf-2-4 libgconf2-4 libgcr-3-1 libgcr-3-common libgcrypt11 libgdata-common libgdata13 libgdbm3 libgdict-1.0-6 libgdict-common libgdk-pixbuf2.0-0 libgdk-pixbuf2.0-common libgee2 libgegl-0.2-0 libgeoclue0 libgeocode-glib0 libgeoip1 libgeronimo-jta-1.1-spec-java libgettextpo0 libgfortran3 libgimp2.0 libgirepository-1.0-1 libgl1-mesa-dri libgl1-mesa-glx libgl2ps0 libglapi-mesa libgles1-mesa libgles2-mesa libglib-perl libglib2.0-0 libglib2.0-bin libglib2.0-data libglibmm-2.4-1c2a libglu1-mesa libgmime-2.6-0 libgmime2.6-cil libgmp10 libgnome-desktop-3-2 libgnome-menu-3-0 libgnome2-0 libgnome2-common libgnomekbd-common libgnomevfs2-0 libgnomevfs2-common libgnomevfs2-extra libgnumail-java libgnutls26 libgoa-1.0-0 libgoa-1.0-common libgomp1 libgoogle-gson-java libgpg-error0 libgpgme11 libgphoto2-2 libgphoto2-l10n libgphoto2-port0 libgpm2 libgraphicsmagick++3 libgraphicsmagick3 libgs9 libgs9-common libgsf-1-114 libgsf-1-common libgsl0ldbl libgssapi-krb5-2 libgssdp-1.0-3 libgtk-3-0 libgtk-3-bin libgtk-3-common libgtk-vnc-2.0-0 libgtk2-perl libgtk2.0-0 libgtk2.0-bin libgtk2.0-common libgtkhtml-4.0-0 libgtkhtml-4.0-common libgtkhtml-editor-4.0-0 libgtkmm-2.4-1c2a libgtkmm-3.0-1 libgtksourceview-3.0-common libgtop2-7 libgtop2-common libgucharmap-2-90-7 libgudev-1.0-0 libgupnp-1.0-4 libgupnp-av-1.0-2 libgupnp-igd-1.0-4 libgusb2 libgvnc-1.0-0 libgweather-common libgxps2 libhamcrest-java libhdf5-7 libhpmud0 libhtml-parser-perl libhttp-message-perl libhttpclient-java libhttpcore-java libhyphen0 libicc2 libicu48 libicu4j-java libidn11 libieee1284-3 libilmbase6 libimdi0 libio-socket-ip-perl libio-socket-ssl-perl libisc84 libisccc80 libisccfg82 libisofs6 libitm1 libjack-jackd2-0 libjasper1 libjavascriptcoregtk-1.0-0 libjavascriptcoregtk-3.0-0 libjaxen-java libjdom1-java libjetty8-java libjgit-java libjsch-java libjson-glib-1.0-0 libjsoup-java libk5crypto3 libkeyutils1 libkpathsea6 libkrb5-3 libkrb5support0 liblapack-dev liblapack3 libldap-2.4-2 liblensfun-data liblensfun0 liblocale-gettext-perl liblockfile-bin liblockfile1 liblog4j1.2-java liblouis-data liblouis2 libltdl7 liblua5.1-0 liblvm2app2.2 liblwp-protocol-https-perl liblwres80 libmad0 libmagic1 libmagick++5 libmagickcore5 libmagickcore5-extra libmagickwand5 libmailtools-perl libmeanwhile1 libmetacity-private0a libmhash2 libmimic0 libmission-control-plugins0 libmodplug1 libmount1 libmozjs185-1.0 libmpeg2-4 libmpfr4 libmtdev1 libmtp-common libmtp-runtime libmtp9 libmutter0 libnautilus-extension1a libncurses5 libncurses5-dev libncursesw5 libneon27-gnutls libnet-dbus-perl libnet-http-perl libnet-ssleay-perl libnetfilter-conntrack3 libnettle4 libnewt0.52 libnfnetlink0 libnfsidmap2 libnice10 libnl-3-200 libnl-genl-3-200 libnl-route-3-200 libnm-glib-vpn1 libnm-glib4 libnm-gtk-common libnm-gtk0 libnm-util2 libnotify4 libnspr4 libnss3 libnss3-1d liboauth0 liboctave1 libogg0 libopenexr6 libopenobex1 libopenvg1-mesa libopus0 liborbit2 liborc-0.4-0 libosgi-core-java libp11-kit0 libpam-ck-connector libpam-gnome-keyring libpam-modules libpam-modules-bin libpam-runtime libpam0g libpanel-applet-4-0 libpango-perl libpango1.0-0 libpangomm-1.4-1 libparted0debian1 libpcap0.8 libpci3 libpciaccess0 libpcre3 libpcre3-dev libpcrecpp0 libpcsclite1 libpeas-1.0-0 libpeas-common libpipeline1 libpixman-1-0 libplist1 libpng12-0 libpng12-dev libpoppler-glib8 libpoppler19 libportaudio2 libpostproc52 libprocps0 libpst4 libpstoedit0c2a libpth20 libpthread-stubs0-dev libpulse-mainloop-glib0 libpulse0 libpurple-bin libpurple0 libpython2.7 libqt4-network libqt4-opengl libqt4-xml libqtcore4 libqtdbus4 libqtgui4 libquadmath0 libquvi-scripts libraptor2-0 librasqal3 libraw1394-11 librdf0 libreadline5 libreoffice libreoffice-base libreoffice-base-core libreoffice-calc libreoffice-common libreoffice-core libreoffice-draw libreoffice-evolution libreoffice-gnome libreoffice-gtk libreoffice-help-en-us libreoffice-help-pl libreoffice-impress libreoffice-java-common libreoffice-l10n-pl libreoffice-math libreoffice-report-builder-bin libreoffice-style-galaxy libreoffice-style-tango libreoffice-writer librome-java librsvg2-2 librsvg2-common librtmp0 libsane libsane-common libsane-extras libsane-extras-common libsane-hpaio libsasl2-2 libsasl2-modules libsdl-image1.2 libsdl-mixer1.2 libsdl-net1.2 libsdl1.2debian libseed-gtk3-0 libselinux1 libsemanage-common libsemanage1 libsensors4 libsepol1 libservlet2.5-java libservlet3.0-java libsgutils2-2 libshout3 libsmbclient libsndfile1 libsnmp-base libsocialweb-client2 libsocialweb-common libsocialweb-service libsocialweb0 libsocket-perl libsoundtouch0 libsoup-gnome2.4-1 libsoup2.4-1 libspandsp2 libsqlite3-0 libss2 libssh2-1 libssl1.0.0 libstartup-notification0 libstdc++6 libsvn1 libswresample0 libswscale2 libswt-cairo-gtk-3-jni libswt-glx-gtk-3-jni libswt-gnome-gtk-3-jni libswt-gtk-3-java libswt-gtk-3-jni libswt-webkit-gtk-3-jni libsystemd-login0 libtalloc2 libtasn1-3 libtdb1 libtelepathy-glib0 libtext-charwidth-perl libtext-iconv-perl libthai-data libthai0 libtie-ixhash-perl libtiff4 libtinfo-dev libtinfo5 libtokyocabinet9 libtomcat7-java libtotem-plparser17 libtotem0 libunique-3.0-0 libupower-glib1 libusb-0.1-4 libusb-1.0-0 libuuid-perl libuuid1 libv4l-0 libv4lconvert0 libva1 libvisio-0.0-0 libvo-aacenc0 libvo-amrwbenc0 libvpx1 libvte-2.90-9 libvte-2.90-common libwbclient0 libwebkitgtk-1.0-0 libwebkitgtk-1.0-common libwebkitgtk-3.0-0 libwebkitgtk-3.0-common libwnck-3-0 libwnck-3-common libwpd-0.9-9 libwps-0.2-2 libws-commons-util-java libwsdl4j-java libwww-perl libwxbase2.8-0 libwxgtk2.8-0 libx11-6 libx11-data libx11-dev libx11-doc libx11-xcb1 libxalan2-java libxapian22 libxau-dev libxau6 libxaw7 libxcb-dri2-0 libxcb-glx0 libxcb-render0 libxcb-shape0 libxcb-shm0 libxcb-xfixes0 libxcb1 libxcb1-dev libxcomposite1 libxcursor1 libxdamage1 libxerces2-java libxext6 libxfixes3 libxfont1 libxi6 libxinerama1 libxml-parser-perl libxml2 libxmlrpc3-client-java libxmlrpc3-common-java libxom-java libxrandr2 libxrender1 libxres1 libxslt1.1 libxt-dev libxt6 libxtst6 libxv1 libxvmc1 libxxf86dga1 libxxf86vm1 libxz-java libyajl2 libyelp0 libzbar0 libzephyr4 libzvbi-common libzvbi0 lightsoff linux-image-amd64 linux-libc-dev linux-source-3.10 lm-sensors locales logrotate lsb-base lsb-release m4 man-db manpages manpages-dev manpages-pl manpages-pl-dev mc mc-data media-player-info mercurial mercurial-common mesa-utils metacity metacity-common mime-support mlocate mobile-broadband-provider-info mount mousetweaks mscompress mtools multiarch-support mutt mutter-common myspell-pl nautilus nautilus-data nautilus-sendto nautilus-sendto-empathy ncurses-base ncurses-bin ncurses-term net-tools netbase network-manager network-manager-gnome nfs-common nmap ntfs-3g obexd-client octave octave-common openprinting-ppds openssh-client openssl os-prober packagekit packagekit-backend-aptcc packagekit-tools patch pciutils perl perl-base perl-modules perlmagick pidgin-data pm-utils poppler-data poppler-utils ppp printer-driver-c2esp printer-driver-escpr printer-driver-foo2zjs printer-driver-hpcups printer-driver-hpijs printer-driver-m2300w printer-driver-postscript-hp printer-driver-ptouch printer-driver-pxljr procps psmisc pstoedit pulseaudio pulseaudio-module-x11 pulseaudio-utils python python-apt python-apt-common python-brlapi python-dbus python-dbus-dev python-debian python-gi python-gi-cairo python-gobject python-gobject-2 python-louis python-mako python-markupsafe python-minimal python-numpy python-pyatspi python-pyatspi2 python-uno{b} python-wnck python-xapian python-xdg python2.7 python2.7-minimal quadrapassel r-base r-base-core r-base-dev r-base-html r-cran-boot r-cran-class r-cran-cluster r-cran-codetools r-cran-foreign r-cran-kernsmooth r-cran-lattice r-cran-mass r-cran-matrix r-cran-mgcv r-cran-nlme r-cran-nnet r-cran-rpart r-cran-spatial r-cran-survival r-doc-html r-recommended rhythmbox rhythmbox-data rhythmbox-plugin-cdrecorder rhythmbox-plugins rpcbind rsyslog rtkit rygel rygel-playbin rygel-preferences rygel-tracker samba-common samba-common-bin sane-utils sat4j seahorse sed sensible-utils sgml-data shotwell shotwell-common smbclient software-properties-common software-properties-gtk sound-theme-freedesktop ssl-cert sudo swell-foop synaptic syslinux syslinux-common syslinux-themes-debian syslinux-themes-debian-wheezy sysv-rc sysvinit sysvinit-utils tar task-desktop task-gnome-desktop task-laptop task-polish task-polish-desktop task-print-server tasksel tasksel-data tcl8.5 telepathy-gabble telepathy-haze telepathy-idle telepathy-logger telepathy-mission-control-5 telepathy-rakia texinfo tk8.5 totem totem-common totem-plugins traceroute tracker tracker-extract tracker-gui tracker-miner-fs tracker-utils transmission-common transmission-gtk ttf-dejavu ttf-dejavu-core ttf-dejavu-extra tzdata tzdata-java ucf udev udisks ufraw ufraw-batch unattended-upgrades uno-libs3 unoconv unrar unzip upower ure usb-modeswitch usb-modeswitch-data usbutils util-linux util-linux-locales valgrind valgrind-dbg vbetool vim vim-common vim-runtime vim-tiny vinagre vino w3m wget whiptail whois wireless-regdb wpolish x11-apps x11-common x11-utils x11-xserver-utils x11proto-core-dev x11proto-input-dev xbitmaps xbrlapi xdg-user-dirs xdg-user-dirs-gtk xdg-utils xfonts-terminus xorg xorg-docs-core xorg-sgml-doctools xserver-common xserver-xephyr xserver-xorg xserver-xorg-core xserver-xorg-input-all xserver-xorg-input-evdev xserver-xorg-input-mouse xserver-xorg-input-synaptics xserver-xorg-input-vmmouse xserver-xorg-input-wacom xserver-xorg-video-all xserver-xorg-video-ati xserver-xorg-video-cirrus xserver-xorg-video-fbdev xserver-xorg-video-intel xserver-xorg-video-mach64 xserver-xorg-video-mga xserver-xorg-video-neomagic xserver-xorg-video-nouveau xserver-xorg-video-openchrome xserver-xorg-video-r128 xserver-xorg-video-radeon xserver-xorg-video-savage xserver-xorg-video-siliconmotion xserver-xorg-video-sisusb xserver-xorg-video-tdfx xserver-xorg-video-trident xserver-xorg-video-vesa xserver-xorg-video-vmware xterm xul-ext-adblock-plus yelp yelp-xsl zenity zenity-common zip zlib1g zlib1g-dev Następujące pakiety POLECANE przez inne NIE zostaną zainstalowane: aptitude-doc-cs aptitude-doc-en aptitude-doc-es aptitude-doc-fi aptitude-doc-fr aptitude-doc-it aptitude-doc-ja gnupg-curl gnupg-curl:i386 uuid-runtime uuid-runtime:i386 1212 pakietów aktualizowanych, 308 instalowanych, 130 do usunięcia i 0 nieaktualizowanych. Do pobrania 1527 MB archiwów. Zajęte po rozpakowaniu: 435 MB. Następujące pakiety mają niespełnione zależności: xserver-xorg-video-apm : Wymaga: xorg-video-abi-12 który jest pakietem wirtualnym. xserver-xorg-video-ark : Wymaga: xorg-video-abi-12 który jest pakietem wirtualnym. xserver-xorg-video-s3virge : Wymaga: xorg-video-abi-12 który jest pakietem wirtualnym. xserver-xorg-video-chips : Wymaga: xorg-video-abi-12 który jest pakietem wirtualnym. xserver-xorg-video-sis : Wymaga: xorg-video-abi-12 który jest pakietem wirtualnym. python3-uno : W konflikcie z: python-uno ale zaplanowana jest instalacja wersji 1:4.1.1-1+b1. python-uno : W konflikcie z: python3-uno ale zaplanowana jest instalacja wersji 1:4.1.1-1+b1. xserver-xorg-video-s3 : Wymaga: xorg-video-abi-12 który jest pakietem wirtualnym. xserver-xorg-video-voodoo : Wymaga: xorg-video-abi-12 który jest pakietem wirtualnym. xserver-xorg-video-tseng : Wymaga: xorg-video-abi-12 który jest pakietem wirtualnym. libgjs0c : Narusza zależności: libgjs0b ale zainstalowana jest wersja 1.32.0-5. xserver-xorg-video-rendition : Wymaga: xorg-video-abi-12 który jest pakietem wirtualnym. xserver-xorg-video-i128 : Wymaga: xorg-video-abi-12 który jest pakietem wirtualnym. Następujące działania rozwiążą problemy z zależnościami: Usunięcie następujących pakietów: 1) eog 2) gedit 3) gedit-plugins 4) gir1.2-peas-1.0 5) gir1.2-rb-3.0 6) gir1.2-totem-1.0 7) gjs 8) gnome 9) gnome-core 10) gnome-documents 11) gnome-session 12) gnome-shell 13) gnome-shell-extensions 14) gnome-sushi 15) libpeas-1.0-0 16) libtotem0 17) rhythmbox 18) rhythmbox-plugin-cdrecorder 19) rhythmbox-plugins 20) task-gnome-desktop 21) totem 22) totem-plugins 23) unoconv 24) xserver-xorg-video-apm 25) xserver-xorg-video-ark 26) xserver-xorg-video-chips 27) xserver-xorg-video-i128 28) xserver-xorg-video-rendition 29) xserver-xorg-video-s3 30) xserver-xorg-video-s3virge 31) xserver-xorg-video-sis 32) xserver-xorg-video-tseng 33) xserver-xorg-video-voodoo Zatrzymanie bieżących wersji następujących pakietów: 34) libgjs0c [niezainstalowany] 35) librhythmbox-core8 [niezainstalowany] 36) python3-uno [niezainstalowany] Pozostawienie następujących problemów z zależnościami: 37) gedit-common poleca gedit 38) gnome-control-center poleca gnome-session 39) gnome-panel poleca gnome-session (>= 2.26) 40) nautilus poleca gnome-sushi 41) rhythmbox-data poleca rhythmbox 42) task-desktop poleca task-gnome-desktop | task-kde-desktop | ta 43) task-gnome-desktop poleca gnome Zaakceptować rozwiązanie? [Y/n/q/?] y Następujące pakiety mają niespełnione zależności: libgtksourceview-3.0-0 : Wymaga: libgtksourceview-3.0-common (< 3.5) ale zaplanowana jest instalacja wersji 3.8.2-1. librhythmbox-core6 : Wymaga: libpeas-1.0-0 (>= 1.0.0) ale nie ma być instalowany. Następujące działania rozwiążą problemy z zależnościami: Usunięcie następujących pakietów: 1) libgtksourceview-3.0-0 2) librhythmbox-core6 Pozostawienie następujących problemów z zależnościami: 3) gedit-common poleca gedit 4) gnome-control-center poleca gnome-session 5) gnome-panel poleca gnome-session (>= 2.26) 6) nautilus poleca gnome-sushi 7) task-desktop poleca task-gnome-desktop | task-kde-desktop | tas ============ Następujące NOWE pakiety zostaną zainstalowane: aglfn{a} apache2-bin blender-data{a} cpp-4.8{a} cups-browsed{a} cups-daemon{a} cups-server-common{a} dconf-cli{a} dconf-editor{a} dh-python{a} diffstat{a} eclipse-cdt-profiling-framework{a} ethtool{a} five-or-more{a} fonts-dejavu{a} fonts-dejavu-core{a} fonts-dejavu-extra{a} four-in-a-row{a} g++-4.8{a} gawk{a} gcc-4.8{a} gcc-4.8-base{a} geoclue-nominatim{a} gfortran-4.8{a} gnome-chess{a} gnome-klotski{a} gnome-mahjongg{a} gnome-mines{a} gnome-nibbles{a} gnome-packagekit-session{a} gnome-robots{a} gnome-tetravex{a} gnupg-agent{a} gnupg2{a} gnustep-base-common{a} gnustep-base-runtime{a} gnustep-common{a} gstreamer1.0-libav{a} gstreamer1.0-nice{a} gstreamer1.0-plugins-bad{a} gstreamer1.0-plugins-base{a} gstreamer1.0-plugins-good{a} gstreamer1.0-plugins-ugly{a} gstreamer1.0-pulseaudio{a} gstreamer1.0-x{a} gtk2-engines-pixbuf{a} hardening-includes{a} icedtea-7-jre-jamvm{a} init-system-helpers{a} iproute2 javascript-common{a} libapt-pkg-perl{a} libarchive-extract-perl{a} libarchive-zip-perl{a} libarchive13{a} libasan0{a} libasound2-data{a} libasprintf-dev{a} libassuan0{a} libatm1{a} libatomic1{a} libaudit-common{a} libaudit1{a} libauthen-sasl-perl{a} libautodie-perl{a} libavresample1{a} libavutil52{a} libboost-chrono1.54.0{a} libboost-date-time1.49.0{a} libboost-date-time1.54.0{a} libboost-filesystem1.54.0{a} libboost-iostreams1.54.0{a} libboost-locale1.54.0{a} libboost-program-options1.54.0{a} libboost-regex1.54.0{a} libboost-system1.54.0{a} libboost-thread1.54.0{a} libbrlapi0.6{a} libcamel-1.2-43{a} libcdr-0.0-0{a} libcheese-gtk23{a} libcheese7{a} libclass-accessor-perl{a} libclone-perl{a} libcloog-isl4{a} libcloog-ppl1{a} libclucene-contribs1{a} libclucene-core1{a} libclutter-gst-2.0-0{a} libcmis-0.3-3{a} libcogl-pango12{a} libcogl12{a} libcolord-gtk1{a} libcolorhug1{a} libcommons-io-java{a} libdconf1{a} libdigest-hmac-perl{a} libdrm-nouveau2{a} libebackend-1.2-6{a} libebook-1.2-14{a} libebook-contacts-1.2-0{a} libecal-1.2-15{a} libedata-book-1.2-17{a} libedata-cal-1.2-20{a} libedataserver-1.2-17{a} libee0{a} libelfg0{a} libemail-valid-perl{a} libestr0{a} libexttextcat-2.0-0{a} libfarstream-0.2-2{a} libffi6{a} libfftw3-double3{a} libfftw3-single3{a} libfltk-gl1.3{a} libfltk1.3{a} libfluidsynth1{a} libfontembed1{a} libgcc-4.7-dev{a} libgcc-4.8-dev{a} libgcr-base-3-1{a} libgcr-ui-3-1{a} libgd3{a} libgee-0.8-2{a} libgettextpo-dev{a} libgexiv2-2{a} libgfortran-4.8-dev{a} libgmpxx4ldbl{a} libgnome-bluetooth11{a} libgnomekbd8{a} libgnustep-base1.22{a} libgnutls-openssl27{a} libgnutls28{a} libgraphite2-3{a} libgstreamer-plugins-bad1.0-0{a} libgstreamer-plugins-base1.0-0{a} libgstreamer1.0-0{a} libgtkglext1{a} libgtksourceview-3.0-1{a} libgupnp-dlna-2.0-3{a} libgweather-3-3{a} libharfbuzz-icu0{a} libharfbuzz0a{a} libhogweed2{a} libhsqldb1.8.0-java{a} libhtml-template-perl{a} libintl-perl{a} libio-html-perl{a} libio-pty-perl{a} libio-socket-inet6-perl{a} libio-string-perl{a} libipc-run-perl{a} libipc-system-simple-perl{a} libisl10{a} libisorelax-java{a} libjavaewah-java{a} libjemalloc1{a} libjs-jquery{a} libjson-c2{a} libjson-glib-1.0-common{a} libjzlib-java{a} libksba8{a} liblangtag-common{a} liblangtag1{a} liblist-moreutils-perl{a} libllvm3.2{a} liblog-message-simple-perl{a} liblognorm0{a} liblua5.2-0{a} liblzo2-2{a} libmnl0{a} libmodule-pluggable-perl{a} libmpc3{a} libmpg123-0{a} libmspub-0.0-0{a} libmsv-java{a} libmwaw-0.1-1{a} libnet-dns-perl{a} libnet-domain-tld-perl{a} libnet-ip-perl{a} libnet-smtp-ssl-perl{a} libobjc4{a} libodfgen-0.0-0{a} libopencv-core2.4{a} libopencv-highgui2.4{a} libopencv-imgproc2.4{a} libopenimageio1.2{a} liborcus-0.6-0{a} libpackagekit-glib2-16{a} libpango-1.0-0{a} libpangocairo-1.0-0{a} libpangoft2-1.0-0{a} libpangox-1.0-0 libpangoxft-1.0-0 libparse-debianchangelog-perl{a} libperl4-corelibs-perl{a} libperl5.18{a} libperlio-gzip-perl{a} libpod-latex-perl{a} libppl-c4{a} libppl12{a} libpulsedsp{a} libpython-stdlib{a} libpython2.7-minimal{a} libpython2.7-stdlib{a} libpython3-stdlib{a} libpython3.3{a} libpython3.3-minimal{a} libpython3.3-stdlib{a} libqpdf13{a} libraw9{a} librelaxng-datatype-java{a} librygel-core-2.0-1{a} librygel-renderer-2.0-1{a} librygel-renderer-gst-2.0-1{a} librygel-server-2.0-1{a} libsecret-1-0{a} libsecret-common{a} libserf1{a} libsigsegv2{a} libsnmp30{a} libsocket6-perl{a} libspice-server1{a} libspnav0{a} libstdc++-4.8-dev{a} libsub-identify-perl{a} libsub-name-perl{a} libtasn1-6{a} libtbb2{a} libtelepathy-farstream3{a} libtelepathy-logger3{a} libterm-ui-perl{a} libtevent0{a} libtext-levenshtein-perl{a} libtext-soundex-perl{a} libtext-unidecode-perl{a} libtiff5{a} libtracker-extract-0.16-0{a} libtracker-miner-0.16-0{a} libtracker-sparql-0.16-0{a} libtsan0{a} libtxc-dxtn0{a} libudev1{a} libudisks2-0{a} libwayland-client0{a} libwayland-server0{a} libwebp4{a} libx264-133{a} libx264-138{a} libxatracker1{a} libxml-libxml-perl{a} libxml-namespacesupport-perl{a} libxml-sax-base-perl{a} libxml-sax-expat-perl{a} libxml-sax-perl{a} libxml-simple-perl{a} libxtables10{a} libytnef0{a} libzeitgeist-1.0-1{a} lintian{a} linux-image-3.10-3-amd64{a} openjdk-7-jdk{a} openjdk-7-jre{a} openjdk-7-jre-headless{a} openjdk-7-jre-lib{a} p11-kit{a} patchutils{a} pinentry-gtk2{a} python-lxml{a} python-six{a} python3{a} python3-apt{a} python3-aptdaemon{a} python3-aptdaemon.gtk3widgets{a} python3-dbus{a} python3-defer{a} python3-gi{a} python3-minimal{a} python3-packagekit{a} python3-pkg-resources{a} python3-software-properties{a} python3.3{a} python3.3-minimal{a} qpdf{a} qtcore4-l10n{a} rfkill{a} t1utils{a} tali{a} transfig{a} udisks2{a} unar{a} xserver-xorg-video-modesetting{a} xserver-xorg-video-qxl{a} Następujące pakiety zostaną USUNIĘTE: apache2.2-bin{u} eclipse-rse{u} eog{a} evolution-webcal{u} fuse-utils{u} g++-4.7{u} gedit{a} gedit-plugins{a} geoclue-yahoo{u} gfortran-4.7{u} gir1.2-clutter-gst-1.0{u} gir1.2-peas-1.0{a} gir1.2-rb-3.0{a} gir1.2-totem-1.0{a} git{u} git-man{u} gjs{a} glchess{u} glines{u} gnect{u} gnibbles{u} gnobots2{u} gnome{a} gnome-core{a} gnome-documents{a} gnome-games-extra-data{u} gnome-session{a} gnome-shell{a} gnome-shell-extensions{a} gnome-sushi{a} gnomine{u} gnotravex{u} gnotski{u} gtali{u} libarchive12{u} libatk-adaptor-data{u} libaudit0{u} libbackport-util-concurrent-java{u} libboost-program-options1.49.0{u} libboost-thread1.49.0{u} libbrlapi0.5{u} libcheese-gtk21{u} libcheese3{u} libclutter-gst-1.0-0{u} libclutter-imcontext-0.1-0{u} libclutter-imcontext-0.1-bin{u} libcluttergesture-0.0.2-0{u} libcmis-0.2-0{u} libcogl-pango0{u} libcogl9{u} libcommons-net2-java{u} libcupsdriver1{u} libdconf0{u} libdrm-nouveau1a{u} libebackend-1.2-2{u} libebook-1.2-13{u} libedata-book-1.2-13{u} libedata-cal-1.2-15{u} libedataserverui-3.0-1{u} libelf1{u} liberror-perl{u} libescpr1{u} libexttextcat0{u} libfltk1.1{u} libgd2-xpm{u} libgexiv2-1{u} libgnome-bluetooth10{u} libgnomekbd7{u} libgnujaf-java{u} libgraphite2-2.0.0{u} libgtksourceview-3.0-0{a} libgupnp-dlna-1.0-2{u} libgweather-3-0{u} libhsqldb-java{u} libibverbs1{u} libjaxme-java{u} libjson0{u} libmpc2{u} libmx-1.0-2{u} libmx-bin{u} libnuma1{u} libopenmpi1.3{u} libopenraw1{u} libpackagekit-glib2-14{u} libparpack2{u} libpeas-1.0-0{a} libperl5.14{u} libpthread-stubs0{u} libpython3.2{u} libraw5{u} libreoffice-emailmerge{u} libreoffice-filter-binfilter{u} libreoffice-filter-mobiledev{u} librhythmbox-core6{a} libslp1{u} libsnmp15{u} libstdc++6-4.7-dev{u} libsystemd-daemon0{u} libtelepathy-farstream2{u} libtorque2{u} libtotem0{a} libvte-common{u} libvte9{u} libwayland0{u} libwebp2{u} libx264-123{u} libx264-132{u} mahjongg{u} python-aptdaemon{u} python-aptdaemon.gtk3widgets{u} python-defer{u} python-gnupginterface{u} python-packagekit{u} python-pkg-resources{u} python-pycurl{u} python-software-properties{u} python3.2{u} python3.2-minimal{u} rhythmbox{a} rhythmbox-plugin-cdrecorder{a} rhythmbox-plugins{a} rsync{u} task-gnome-desktop{a} totem{a} totem-plugins{a} ttf-liberation{u} ttf-sil-gentium-basic{u} unoconv{a} xserver-xorg-video-apm{a} xserver-xorg-video-ark{a} xserver-xorg-video-chips{a} xserver-xorg-video-i128{a} xserver-xorg-video-rendition{a} xserver-xorg-video-s3{a} xserver-xorg-video-s3virge{a} xserver-xorg-video-sis{a} xserver-xorg-video-tseng{a} xserver-xorg-video-voodoo{a} Następujące pakiety zostaną zaktualizowane: accountsservice acl acpi-fakekey acpi-support acpi-support-base acpid aisleriot alacarte alsa-base alsa-utils ant ant-optional apt apt-utils apt-xapian-index aptdaemon aptdaemon-data aptitude aptitude-common argyll at at-spi2-core autoconf automake autopoint autotools-dev baobab base-files base-passwd bash bc bind9-host binfmt-support binutils blender bluefish bluefish-data bluefish-plugins bluetooth bluez bluez-alsa bluez-cups bluez-gstreamer bogofilter bogofilter-bdb bogofilter-common bootlogd brasero brasero-common browser-plugin-gnash bsdmainutils bsdutils build-essential busybox bzip2 ca-certificates ca-certificates-java caribou caribou-antler cdbs cdrdao cheese cheese-common chromium chromium-inspector colord console-setup console-setup-linux consolekit coreutils cpio cpp cpp-4.7 cryptsetup-bin cups cups-bsd cups-client cups-common cups-filters cups-pk-helper cups-ppdc db5.1-util dbus dbus-x11 dc dconf-gsettings-backend dconf-service dconf-tools debconf debconf-i18n debian-faq debian-keyring debianutils default-jdk default-jre default-jre-headless desktop-file-utils dictionaries-common diffutils discover-data dmidecode dmsetup dnsmasq-base dnsutils dosfstools e2fslibs e2fsprogs eclipse eclipse-anyedit eclipse-cdt eclipse-cdt-autotools eclipse-cdt-jni eclipse-cdt-pkg-config eclipse-cdt-valgrind eclipse-egit eclipse-emf eclipse-jdt eclipse-mylyn eclipse-mylyn-builds-hudson eclipse-mylyn-context-cdt eclipse-mylyn-context-jdt eclipse-mylyn-context-pde eclipse-mylyn-tasks-bugzilla eclipse-mylyn-tasks-trac eclipse-mylyn-versions-cvs eclipse-mylyn-wikitext eclipse-pde eclipse-platform eclipse-platform-data eclipse-rcp ekg2 ekg2-core ekg2-dbg ekg2-jabber ekg2-ui-ncurses empathy empathy-common enchant espeak-data evince evince-common evolution evolution-common evolution-data-server evolution-data-server-common evolution-plugins exfat-fuse exfat-utils exim4 exim4-base exim4-config exim4-daemon-light extlinux fastjar file file-roller findutils folks-common fontconfig fontconfig-config fonts-cantarell fonts-droid fonts-lyx fonts-opensymbol foomatic-db-compressed-ppds foomatic-db-engine fosfat fosfat-dev ftp fuse fusefat g++ gcc gcc-4.7 gcc-4.7-base gconf-service gconf2 gconf2-common gcr gdb gdbserver gdebi gdebi-core gdm3 gedit-common geoclue geoclue-hostip geoclue-localnet geoclue-manual geoip-database gettext gettext-base gfortran ghostscript ghostscript-cups gimp gimp-data gimp-ufraw gir1.2-accountsservice-1.0 gir1.2-atk-1.0 gir1.2-atspi-2.0 gir1.2-caribou-1.0 gir1.2-clutter-1.0 gir1.2-cogl-1.0 gir1.2-coglpango-1.0 gir1.2-evince-3.0 gir1.2-freedesktop gir1.2-gck-1 gir1.2-gconf-2.0 gir1.2-gcr-3 gir1.2-gdata-0.0 gir1.2-gdkpixbuf-2.0 gir1.2-gkbd-3.0 gir1.2-glib-2.0 gir1.2-gmenu-3.0 gir1.2-gnomebluetooth-1.0 gir1.2-goa-1.0 gir1.2-gtk-3.0 gir1.2-gtkclutter-1.0 gir1.2-gtksource-3.0 gir1.2-gtop-2.0 gir1.2-gucharmap-2.90 gir1.2-javascriptcoregtk-3.0 gir1.2-json-1.0 gir1.2-mutter-3.0 gir1.2-networkmanager-1.0 gir1.2-panelapplet-4.0 gir1.2-pango-1.0 gir1.2-soup-2.4 gir1.2-telepathyglib-0.12 gir1.2-telepathylogger-0.2 gir1.2-totem-plparser-1.0 gir1.2-upowerglib-1.0 gir1.2-vte-2.90 gir1.2-webkit-3.0 gir1.2-wnck-3.0 gkbd-capplet glib-networking glib-networking-common glib-networking-services gnash gnash-common gnome-accessibility-themes gnome-applets gnome-applets-data gnome-backgrounds gnome-bluetooth gnome-color-manager gnome-contacts gnome-control-center gnome-control-center-data gnome-desktop3-data gnome-dictionary gnome-font-viewer gnome-games gnome-icon-theme gnome-icon-theme-extras gnome-icon-theme-symbolic gnome-keyring gnome-menus gnome-nettool gnome-online-accounts gnome-packagekit gnome-packagekit-data gnome-panel gnome-panel-data gnome-power-manager gnome-screensaver gnome-screenshot gnome-settings-daemon gnome-shell-common gnome-sudoku gnome-system-log gnome-system-monitor gnome-terminal gnome-terminal-data gnome-themes-standard gnome-themes-standard-data gnome-user-guide gnome-user-share gnuchess gnupg gnuplot gnuplot-x11 google-chrome-stable gparted gpgv grep groff groff-base gstreamer0.10-nice gstreamer0.10-plugins-ugly gucharmap guile-2.0-libs gvfs gvfs-backends gvfs-bin gvfs-common gvfs-daemons gvfs-libs gzip hdparm hostname hpijs hplip hplip-data hwdata hyphen-en-us iagno ifupdown imagemagick imagemagick-common info initramfs-tools initscripts inkscape install-info installation-report ipolish iproute iptables iputils-ping iputils-tracepath irssi isc-dhcp-client isc-dhcp-common iso-codes jarwrapper java-common junit4 kbd keyboard-configuration krb5-locales less libaa1 libaacs0 libaccountsservice0 libacl1 libalgorithm-diff-perl libalgorithm-diff-xs-perl libapache2-mod-dnssd libapr1 libaprutil1 libaprutil1-dbd-sqlite3 libaprutil1-ldap libapt-inst1.5 libapt-pkg4.12 libarpack2 libasm3-java libasound2 libasound2-plugins libasprintf0c2 libass4 libatasmart4 libatk-adaptor libatk-bridge2.0-0 libatk-wrapper-java libatk-wrapper-java-jni libatk1.0-0 libatk1.0-data libatkmm-1.6-1 libatlas3-base libatspi2.0-0 libattr1 libaudio2 libavcodec54 libavformat54 libaxis-java libbind9-80 libblas-dev libblas3 libblas3gf libblkid1 libbluetooth3 libbluray1 libbonobo2-0 libbonobo2-common libboost-iostreams1.49.0 libbrasero-media3-1 libbsd0 libburn4 libbz2-1.0 libbz2-dev libc-bin libc-dev-bin libc6 libc6-dbg libc6-dev libcairo-gobject2 libcairo-perl libcairo2 libcanberra-gtk-module libcanberra-gtk0 libcanberra-gtk3-0 libcanberra-gtk3-module libcanberra-pulse libcanberra0 libcap-ng0 libcaribou-common libcaribou-gtk-module libcaribou-gtk3-module libcaribou0 libcdaudio1 libcdparanoia0 libchamplain-0.12-0 libchamplain-gtk-0.12-0 libck-connector0 libclass-isa-perl libclutter-1.0-0 libclutter-1.0-common libclutter-gtk-1.0-0 libcogl-common libcolord1 libcomerr2 libcommons-beanutils-java libcommons-codec-java libcommons-collections3-java libcommons-compress-java libcommons-digester-java libcommons-logging-java libcommons-pool-java libcroco3 libcryptsetup4 libcups2 libcupscgi1 libcupsfilters1 libcupsimage2 libcupsmime1 libcupsppdc1 libcurl3 libcurl3-gnutls libdatrie1 libdb5.1 libdb5.1-java libdb5.1-java-jni libdbus-1-3 libdc1394-22 libdca0 libdevmapper-event1.02.1 libdevmapper1.02.1 libdiscid0 libdjvulibre-text libdjvulibre21 libdmapsharing-3.0-2 libdns88 libdom4j-java libdrm-intel1 libdrm-radeon1 libdrm2 libdvdnav4 libdvdread4 libeasymock-java libecj-java libedit2 libegl1-mesa libegl1-mesa-drivers libenca0 libenchant1c2a libequinox-osgi-java libespeak1 libevdocument3-4 libevent-2.0-5 libevolution libevview3-3 libexempi3 libexif12 libexpat1 libexttextcat-data libfdk-aac0 libfftw3-3 libfile-fcntllock-perl libfile-mimeinfo-perl libflac8 libflite1 libfolks-eds25 libfolks-telepathy25 libfolks25 libfontconfig1 libfontenc1 libfosfat0 libfosgra0 libfribidi0 libfs6 libfuse2 libgail-3-0 libgail-common libgail18 libgbm1 libgc1c2 libgcc1 libgck-1-0 libgconf-2-4 libgconf2-4 libgcr-3-1 libgcr-3-common libgcrypt11 libgdata-common libgdata13 libgdbm3 libgdict-1.0-6 libgdict-common libgdk-pixbuf2.0-0 libgdk-pixbuf2.0-common libgee2 libgegl-0.2-0 libgeoclue0 libgeocode-glib0 libgeoip1 libgeronimo-jta-1.1-spec-java libgettextpo0 libgfortran3 libgimp2.0 libgirepository-1.0-1 libgl1-mesa-dri libgl1-mesa-glx libgl2ps0 libglapi-mesa libgles1-mesa libgles2-mesa libglib-perl libglib2.0-0 libglib2.0-bin libglib2.0-data libglibmm-2.4-1c2a libglu1-mesa libgmime-2.6-0 libgmime2.6-cil libgmp10 libgnome-desktop-3-2 libgnome-menu-3-0 libgnome2-0 libgnome2-common libgnomekbd-common libgnomevfs2-0 libgnomevfs2-common libgnomevfs2-extra libgnumail-java libgnutls26 libgoa-1.0-0 libgoa-1.0-common libgomp1 libgoogle-gson-java libgpg-error0 libgpgme11 libgphoto2-2 libgphoto2-l10n libgphoto2-port0 libgpm2 libgraphicsmagick++3 libgraphicsmagick3 libgs9 libgs9-common libgsf-1-114 libgsf-1-common libgsl0ldbl libgssapi-krb5-2 libgssdp-1.0-3 libgtk-3-0 libgtk-3-bin libgtk-3-common libgtk-vnc-2.0-0 libgtk2-perl libgtk2.0-0 libgtk2.0-bin libgtk2.0-common libgtkhtml-4.0-0 libgtkhtml-4.0-common libgtkhtml-editor-4.0-0 libgtkmm-2.4-1c2a libgtkmm-3.0-1 libgtksourceview-3.0-common libgtop2-7 libgtop2-common libgucharmap-2-90-7 libgudev-1.0-0 libgupnp-1.0-4 libgupnp-av-1.0-2 libgupnp-igd-1.0-4 libgusb2 libgvnc-1.0-0 libgweather-common libgxps2 libhamcrest-java libhdf5-7 libhpmud0 libhtml-parser-perl libhttp-message-perl libhttpclient-java libhttpcore-java libhyphen0 libicc2 libicu48 libicu4j-java libidn11 libieee1284-3 libilmbase6 libimdi0 libio-socket-ip-perl libio-socket-ssl-perl libisc84 libisccc80 libisccfg82 libisofs6 libitm1 libjack-jackd2-0 libjasper1 libjavascriptcoregtk-1.0-0 libjavascriptcoregtk-3.0-0 libjaxen-java libjdom1-java libjetty8-java libjgit-java libjsch-java libjson-glib-1.0-0 libjsoup-java libk5crypto3 libkeyutils1 libkpathsea6 libkrb5-3 libkrb5support0 liblapack-dev liblapack3 libldap-2.4-2 liblensfun-data liblensfun0 liblocale-gettext-perl liblockfile-bin liblockfile1 liblog4j1.2-java liblouis-data liblouis2 libltdl7 liblua5.1-0 liblvm2app2.2 liblwp-protocol-https-perl liblwres80 libmad0 libmagic1 libmagick++5 libmagickcore5 libmagickcore5-extra libmagickwand5 libmailtools-perl libmeanwhile1 libmetacity-private0a libmhash2 libmimic0 libmission-control-plugins0 libmodplug1 libmount1 libmozjs185-1.0 libmpeg2-4 libmpfr4 libmtdev1 libmtp-common libmtp-runtime libmtp9 libmutter0 libnautilus-extension1a libncurses5 libncurses5-dev libncursesw5 libneon27-gnutls libnet-dbus-perl libnet-http-perl libnet-ssleay-perl libnetfilter-conntrack3 libnettle4 libnewt0.52 libnfnetlink0 libnfsidmap2 libnice10 libnl-3-200 libnl-genl-3-200 libnl-route-3-200 libnm-glib-vpn1 libnm-glib4 libnm-gtk-common libnm-gtk0 libnm-util2 libnotify4 libnspr4 libnss3 libnss3-1d liboauth0 liboctave1 libogg0 libopenexr6 libopenobex1 libopenvg1-mesa libopus0 liborbit2 liborc-0.4-0 libosgi-core-java libp11-kit0 libpam-ck-connector libpam-gnome-keyring libpam-modules libpam-modules-bin libpam-runtime libpam0g libpanel-applet-4-0 libpango-perl libpango1.0-0 libpangomm-1.4-1 libparted0debian1 libpcap0.8 libpci3 libpciaccess0 libpcre3 libpcre3-dev libpcrecpp0 libpcsclite1 libpeas-common libpipeline1 libpixman-1-0 libplist1 libpng12-0 libpng12-dev libpoppler-glib8 libpoppler19 libportaudio2 libpostproc52 libprocps0 libpst4 libpstoedit0c2a libpth20 libpthread-stubs0-dev libpulse-mainloop-glib0 libpulse0 libpurple-bin libpurple0 libpython2.7 libqt4-network libqt4-opengl libqt4-xml libqtcore4 libqtdbus4 libqtgui4 libquadmath0 libquvi-scripts libraptor2-0 librasqal3 libraw1394-11 librdf0 libreadline5 libreoffice libreoffice-base libreoffice-base-core libreoffice-calc libreoffice-common libreoffice-core libreoffice-draw libreoffice-evolution libreoffice-gnome libreoffice-gtk libreoffice-help-en-us libreoffice-help-pl libreoffice-impress libreoffice-java-common libreoffice-l10n-pl libreoffice-math libreoffice-report-builder-bin libreoffice-style-galaxy libreoffice-style-tango libreoffice-writer librome-java librsvg2-2 librsvg2-common librtmp0 libsane libsane-common libsane-extras libsane-extras-common libsane-hpaio libsasl2-2 libsasl2-modules libsdl-image1.2 libsdl-mixer1.2 libsdl-net1.2 libsdl1.2debian libseed-gtk3-0 libselinux1 libsemanage-common libsemanage1 libsensors4 libsepol1 libservlet2.5-java libservlet3.0-java libsgutils2-2 libshout3 libsmbclient libsndfile1 libsnmp-base libsocialweb-client2 libsocialweb-common libsocialweb-service libsocialweb0 libsocket-perl libsoundtouch0 libsoup-gnome2.4-1 libsoup2.4-1 libspandsp2 libsqlite3-0 libss2 libssh2-1 libssl1.0.0 libstartup-notification0 libstdc++6 libsvn1 libswresample0 libswscale2 libswt-cairo-gtk-3-jni libswt-glx-gtk-3-jni libswt-gnome-gtk-3-jni libswt-gtk-3-java libswt-gtk-3-jni libswt-webkit-gtk-3-jni libsystemd-login0 libtalloc2 libtasn1-3 libtdb1 libtelepathy-glib0 libtext-charwidth-perl libtext-iconv-perl libthai-data libthai0 libtie-ixhash-perl libtiff4 libtinfo-dev libtinfo5 libtokyocabinet9 libtomcat7-java libtotem-plparser17 libunique-3.0-0 libupower-glib1 libusb-0.1-4 libusb-1.0-0 libuuid-perl libuuid1 libv4l-0 libv4lconvert0 libva1 libvisio-0.0-0 libvo-aacenc0 libvo-amrwbenc0 libvpx1 libvte-2.90-9 libvte-2.90-common libwbclient0 libwebkitgtk-1.0-0 libwebkitgtk-1.0-common libwebkitgtk-3.0-0 libwebkitgtk-3.0-common libwnck-3-0 libwnck-3-common libwpd-0.9-9 libwps-0.2-2 libws-commons-util-java libwsdl4j-java libwww-perl libwxbase2.8-0 libwxgtk2.8-0 libx11-6 libx11-data libx11-dev libx11-doc libx11-xcb1 libxalan2-java libxapian22 libxau-dev libxau6 libxaw7 libxcb-dri2-0 libxcb-glx0 libxcb-render0 libxcb-shape0 libxcb-shm0 libxcb-xfixes0 libxcb1 libxcb1-dev libxcomposite1 libxcursor1 libxdamage1 libxerces2-java libxext6 libxfixes3 libxfont1 libxi6 libxinerama1 libxml-parser-perl libxml2 libxmlrpc3-client-java libxmlrpc3-common-java libxom-java libxrandr2 libxrender1 libxres1 libxslt1.1 libxt-dev libxt6 libxtst6 libxv1 libxvmc1 libxxf86dga1 libxxf86vm1 libxz-java libyajl2 libyelp0 libzbar0 libzephyr4 libzvbi-common libzvbi0 lightsoff linux-image-amd64 linux-libc-dev linux-source-3.10 lm-sensors locales logrotate lsb-base lsb-release m4 man-db manpages manpages-dev manpages-pl manpages-pl-dev mc mc-data media-player-info mercurial mercurial-common mesa-utils metacity metacity-common mime-support mlocate mobile-broadband-provider-info mount mousetweaks mscompress mtools multiarch-support mutt mutter-common myspell-pl nautilus nautilus-data nautilus-sendto nautilus-sendto-empathy ncurses-base ncurses-bin ncurses-term net-tools netbase network-manager network-manager-gnome nfs-common nmap ntfs-3g obexd-client octave octave-common openprinting-ppds openssh-client openssl os-prober packagekit packagekit-backend-aptcc packagekit-tools patch pciutils perl perl-base perl-modules perlmagick pidgin-data pm-utils poppler-data poppler-utils ppp printer-driver-c2esp printer-driver-escpr printer-driver-foo2zjs printer-driver-hpcups printer-driver-hpijs printer-driver-m2300w printer-driver-postscript-hp printer-driver-ptouch printer-driver-pxljr procps psmisc pstoedit pulseaudio pulseaudio-module-x11 pulseaudio-utils python python-apt python-apt-common python-brlapi python-dbus python-dbus-dev python-debian python-gi python-gi-cairo python-gobject python-gobject-2 python-louis python-mako python-markupsafe python-minimal python-numpy python-pyatspi python-pyatspi2 python-uno python-wnck python-xapian python-xdg python2.7 python2.7-minimal quadrapassel r-base r-base-core r-base-dev r-base-html r-cran-boot r-cran-class r-cran-cluster r-cran-codetools r-cran-foreign r-cran-kernsmooth r-cran-lattice r-cran-mass r-cran-matrix r-cran-mgcv r-cran-nlme r-cran-nnet r-cran-rpart r-cran-spatial r-cran-survival r-doc-html r-recommended rpcbind rsyslog rtkit rygel rygel-playbin rygel-preferences rygel-tracker samba-common samba-common-bin sane-utils sat4j seahorse sed sensible-utils sgml-data shotwell shotwell-common smbclient software-properties-common software-properties-gtk sound-theme-freedesktop ssl-cert sudo swell-foop synaptic syslinux syslinux-common syslinux-themes-debian syslinux-themes-debian-wheezy sysv-rc sysvinit sysvinit-utils tar task-desktop task-laptop task-polish task-polish-desktop task-print-server tasksel tasksel-data tcl8.5 telepathy-gabble telepathy-haze telepathy-idle telepathy-logger telepathy-mission-control-5 telepathy-rakia texinfo tk8.5 traceroute tracker tracker-extract tracker-gui tracker-miner-fs tracker-utils transmission-common transmission-gtk ttf-dejavu ttf-dejavu-core ttf-dejavu-extra tzdata tzdata-java ucf udev udisks ufraw ufraw-batch unattended-upgrades uno-libs3 unrar unzip upower ure usb-modeswitch usb-modeswitch-data usbutils util-linux util-linux-locales valgrind valgrind-dbg vbetool vim vim-common vim-runtime vim-tiny vinagre vino w3m wget whiptail whois wireless-regdb wpolish x11-apps x11-common x11-utils x11-xserver-utils x11proto-core-dev x11proto-input-dev xbitmaps xbrlapi xdg-user-dirs xdg-user-dirs-gtk xdg-utils xfonts-terminus xorg xorg-docs-core xorg-sgml-doctools xserver-common xserver-xephyr xserver-xorg xserver-xorg-core xserver-xorg-input-all xserver-xorg-input-evdev xserver-xorg-input-mouse xserver-xorg-input-synaptics xserver-xorg-input-vmmouse xserver-xorg-input-wacom xserver-xorg-video-all xserver-xorg-video-ati xserver-xorg-video-cirrus xserver-xorg-video-fbdev xserver-xorg-video-intel xserver-xorg-video-mach64 xserver-xorg-video-mga xserver-xorg-video-neomagic xserver-xorg-video-nouveau xserver-xorg-video-openchrome xserver-xorg-video-r128 xserver-xorg-video-radeon xserver-xorg-video-savage xserver-xorg-video-siliconmotion xserver-xorg-video-sisusb xserver-xorg-video-tdfx xserver-xorg-video-trident xserver-xorg-video-vesa xserver-xorg-video-vmware xterm xul-ext-adblock-plus yelp yelp-xsl zenity zenity-common zip zlib1g zlib1g-dev Następujące pakiety POLECANE przez inne NIE zostaną zainstalowane: aptitude-doc-cs aptitude-doc-en aptitude-doc-es aptitude-doc-fi aptitude-doc-fr aptitude-doc-it aptitude-doc-ja gnupg-curl gnupg-curl:i386 task-kde-desktop task-lxde-desktop task-xfce-desktop uuid-runtime uuid-runtime:i386 1189 pakietów aktualizowanych, 293 instalowanych, 138 do usunięcia i 9 nieaktualizowanych. Do pobrania 1508 MB archiwów. Zajęte po rozpakowaniu: 420 MB. Kontynuować? [Y/n/?]
Offline
Skoro sam akceptujesz takie wywalanie, to do kogo chcesz mieć pretensje?
Zrób porządek z repozytoriami, nieoficjalnymi pakietami, zamkniętymi sterownikami i dopiero na końcu bierz się za aktualizację.
Offline
Potem z ręki sam zainstaluje resztę... trudno, bywa... co do repo, mam tylko i wyłącznie z dug.net.pl ....
EDIT:
jak narazie lapek sie nie uruchamia :D
Ostatnio edytowany przez Kovciu (2013-10-17 16:03:28)
Offline
uname -a
Linux anon 3.10-3-amd64 #1 SMP Debian 3.10.11-1 (2013-09-10) x86_64 GNU/Linux
sources.list
## podstawowe repozytorium deb http://ftp.pl.debian.org/debian/ testing main contrib non-free ## uaktualnienia bezpieczeństwa deb http://security.debian.org/ testing/updates main contrib non-free ## deb-multimedia - dodatkowe kodeki, odtwarzacze, etc. deb http://www.deb-multimedia.org/ testing main non-free deb-src http://www.deb-multimedia.org/ testing main non-free ## przeglądarka Google Chrome deb http://dl.google.com/linux/chrome/deb/ stable main
cat /proc/cmdline
BOOT_IMAGE=/boot/vmlinuz-3.10-3-amd64 root=UUID=1eb2c665-3988-4da1-84f3-60cc3974153c ro quiet
sensors
anon@anon:~$ sensors coretemp-isa-0000 Adapter: ISA adapter Physical id 0: +54.0°C (high = +87.0°C, crit = +105.0°C) Core 0: +46.0°C (high = +87.0°C, crit = +105.0°C) Core 1: +47.0°C (high = +87.0°C, crit = +105.0°C) radeon-pci-0100 Adapter: PCI adapter temp1: +42.0°C
Wiatraczek już nie dobija :) ładnie chodzi, dziękuje @yossarian, lecz pojawił się problem z instalacją fglrx, gdyż nie widze możliwości instalacji takich pakietów, jak dam
aptitude search fglrx
to dostaję
c glx-alternative-fglrx - allows the selection of FGLRX as GLX
A teraz to niestety nie chodzi mi na radeonie tylko zintegrowanej od intela... a jest to dziwne... moze idzie to jakoś przełączyć albo cos? Instalowalem pakiet firmware-linux-nonfree - nie pomogło, oraz wyżej wspomniany glx-alternative-fglrx i też nie pomogło.
ps. mały aspekt -> bateria mimo posiadanych 48% pokazuje że wytrzyma jeszcze 103godziny :) // chciał bym ale to nie prawdziwe :D
pozdrawiam
Offline