Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!

Ogłoszenie

Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.

#1  2013-10-13 15:20:10

  Kovciu - Użytkownik

Kovciu
Użytkownik
Zarejestrowany: 2013-10-13

problem z wiatrakiem i acpi

Witam serdecznie,

jak w temacie mam mega uciążliwy problem z wiatrakiem.

Mój sprzęt to:
Dell inspirion 5521-6345 (lapek)

Grafa -> radeon HD 8700M - zainstalowane stery zamknięte -> ze str radeona
ram -> 6gb
dysk -> 750GB
procek -> i5

Kod:

uname -a

Kod:

Linux anon 3.11.4anon #1 SMP Sun Oct 6 20:20:28 CEST 2013 x86_64 GNU/Linux

Problem jest z wiatrakiem, chodzi jak szalony, pod windą nie było tego problemu.

średnia temperatura na procku to ok.45st., czasem chodzi spokojnie do 52st.C, bez wiatraków, a czasem załączy już przy 43st i ciągle buczy... nawet jak zejdzie do 40st,

Kod:

sensors

Kod:

coretemp-isa-0000
Adapter: ISA adapter
Physical id 0:  +40.0°C  (high = +87.0°C, crit = +105.0°C)
Core 0:         +40.0°C  (high = +87.0°C, crit = +105.0°C)
Core 1:         +37.0°C  (high = +87.0°C, crit = +105.0°C)

pkg-temp-0-virtual-0
Adapter: Virtual device
temp1:        +40.0°C

czy można to jakoś zwalczyć? bo naprawde jest uciążliwe i wiatrak załącza się różnie i róznie wyłącza...

Niestety nie moge pracować na jajku 3.2 gdyż nie obsługuje grafy oraz dotykowego ekranu.

------------------------

Kolejny problem jest z acpi, ponieważ jak przejdzie w stan uspienia, to po wzbudzeniu jest zawiecha -> odrazu bez błędu itp.

Oto logi z VAR

Kod:

    5.964412] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20130517/utaddress-251)
[    5.964418] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.964422] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 1 (20130517/utaddress-251)
[    5.964426] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 2 (20130517/utaddress-251)
[    5.964428] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.964430] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 1 (20130517/utaddress-251)
[    5.964432] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 2 (20130517/utaddress-251)
[    5.964435] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver

Kod:

[    6.516232] ACPI Warning: 0x0000000000004040-0x000000000000405f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130517/utaddress-251)
[    6.516240] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver

Kod:

[    7.285864] ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Integer], ACPI requires [Package] (20130517/nsarguments-95)
[    7.285896] ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Integer], ACPI requires [Package] (20130517/nsarguments-95)

Kod:

[    8.074248] ACPI Error: [\_SB_.PCI0.GFX0.DD02._BCL] Namespace lookup failure, AE_NOT_FOUND (20130517/psargs-359)
[    8.074256] ACPI Error: Method parse/execution failed [\_SB_.PCI0.PEG0.PEGP.DD02._BCL] (Node ffff8801d80b5510), AE_NOT_FOUND (20130517/psparse-536)

Kod:

Oct 13 13:20:56 anon kernel: [    0.136728] ACPI: Added _OSI(Module Device)
Oct 13 13:20:56 anon kernel: [    0.136730] ACPI: Added _OSI(Processor Device)
Oct 13 13:20:56 anon kernel: [    0.136732] ACPI: Added _OSI(3.0 _SCP Extensions)
Oct 13 13:20:56 anon kernel: [    0.136735] ACPI: Added _OSI(Processor Aggregator Device)
Oct 13 13:20:56 anon kernel: [    0.138386] ACPI: EC: Look up EC in DSDT
Oct 13 13:20:56 anon kernel: [    0.140200] ACPI: Executed 1 blocks of module-level executable AML code
Oct 13 13:20:56 anon kernel: [    0.159299] ACPI: SSDT 000000009ae17018 0083B (v01  PmRef  Cpu0Cst 00003001 INTL 20130117)
Oct 13 13:20:56 anon kernel: [    0.159755] ACPI: Dynamic OEM Table Load:
Oct 13 13:20:56 anon kernel: [    0.159757] ACPI: SSDT           (null) 0083B (v01  PmRef  Cpu0Cst 00003001 INTL 20130117)
Oct 13 13:20:56 anon kernel: [    0.168632] ACPI: SSDT 000000009ae18a98 00303 (v01  PmRef    ApIst 00003000 INTL 20130117)
Oct 13 13:20:56 anon kernel: [    0.169136] ACPI: Dynamic OEM Table Load:
Oct 13 13:20:56 anon kernel: [    0.169139] ACPI: SSDT           (null) 00303 (v01  PmRef    ApIst 00003000 INTL 20130117)
Oct 13 13:20:56 anon kernel: [    0.178752] ACPI: SSDT 000000009ae16d98 00119 (v01  PmRef    ApCst 00003000 INTL 20130117)
Oct 13 13:20:56 anon kernel: [    0.179193] ACPI: Dynamic OEM Table Load:
Oct 13 13:20:56 anon kernel: [    0.179195] ACPI: SSDT           (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20130117)
Oct 13 13:20:56 anon kernel: [    0.189364] ACPI: Interpreter enabled
Oct 13 13:20:56 anon kernel: [    0.189374] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130517/hwxface-571)
Oct 13 13:20:56 anon kernel: [    0.189380] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
Oct 13 13:20:56 anon kernel: [    0.189399] ACPI: (supports S0 S3 S4 S5)
Oct 13 13:20:56 anon kernel: [    0.189402] ACPI: Using IOAPIC for interrupt routing
Oct 13 13:20:56 anon kernel: [    0.189441] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
Oct 13 13:20:56 anon kernel: [    0.189595] ACPI: No dock devices found.
Oct 13 13:20:56 anon kernel: [    0.387327] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
Oct 13 13:20:56 anon kernel: [    0.387507] \_SB_.PCI0:_OSC invalid UUID
Oct 13 13:20:56 anon kernel: [    0.387509] _OSC request data:1 8 0
Oct 13 13:20:56 anon kernel: [    0.387580] \_SB_.PCI0:_OSC invalid UUID
Oct 13 13:20:56 anon kernel: [    0.387582] _OSC request data:1 1f 0
Oct 13 13:20:56 anon kernel: [    0.387587] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
Oct 13 13:20:56 anon kernel: [    0.387590] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)

Mam nadzieję że za dużo logów nie dałem... ale poprostu nie wiem jak z tym poradzic...

pozdrawiam



edit

Kod:

cat /proc/cmdline

Kod:

BOOT_IMAGE=/boot/vmlinuz-3.11.4anon root=UUID=1c4820a8-c728-4a21-9472-652102156a8d ro quiet

No musiałem kompilować, mogłem zrobić błąd, nie mówię że nie, bo na starym jajku nie działał dotyk i grafa.
Ale to jest stable, jaki świeższy? testing?

Raz przeniosłem się na nistabilny(sid) i nie szło prawie nic zrobic, gnomow nie było itp.
Zrobiłem to przez dodanie do sources.list repo z sid'a i potem aptitude dist-upgrade

pozdrawiam

Ostatnio edytowany przez Kovciu (2013-10-13 15:33:00)

Offline

 

#2  2013-10-13 15:27:41

  yossarian - Szczawiożerca

yossarian
Szczawiożerca
Skąd: Shangri-La
Zarejestrowany: 2011-04-25

Re: problem z wiatrakiem i acpi

Cześć.

To Debian Wheezy?
Lepsze wyjście to jakieś świeższa wersja i sterowniki z repozytorium lub wtedy otwarte.

Kernel sam kompilowałeś?
Pokaż jeszcze:

Kod:

cat /proc/cmdline

Offline

 

#3  2013-10-13 15:42:52

  yossarian - Szczawiożerca

yossarian
Szczawiożerca
Skąd: Shangri-La
Zarejestrowany: 2011-04-25

Re: problem z wiatrakiem i acpi

Zamiast edytować wcześniejszy wpis dopisuj kolejne informacje niżej gdy ktoś o coś zapyta.

Miałem na mysli wersje testową. Tam są trochę aktualniejsze pakiety.
Sprawdź czy coś pomogą opcje w Grubie:

pcie_aspm=force acpi_osi='!Windows 2012' i915.i915_enable_rc6=1

Problemy z wybudzeniem przy używaniu zamkniętych sterowników AMD to standard.

Offline

 

#4  2013-10-13 17:26:51

  Kovciu - Użytkownik

Kovciu
Użytkownik
Zarejestrowany: 2013-10-13

Re: problem z wiatrakiem i acpi

Tylko nie wiem gdzie dodać tą opcje, czy to w /boot/grub/grub.cfg; bo tez widzialem ze daje się opcje w menu.lst ale ja nie mam takiego pliku....

Przepraszam za tamto, ale sie bałem, że mnie zruzgają że dodaję post pod postem

Offline

 

#5  2013-10-13 17:46:33

  morfik - Cenzor wirtualnego świata

morfik
Cenzor wirtualnego świata
Skąd: ze WSI
Zarejestrowany: 2011-09-15
Serwis

Re: problem z wiatrakiem i acpi

W pliku /etc/default/grub . Nie pamiętam dokładnie jak wygląda ten plik ale tam była linijka odpowiedzialna za parametry kernela.

Offline

 

#6  2013-10-13 17:47:49

  yossarian - Szczawiożerca

yossarian
Szczawiożerca
Skąd: Shangri-La
Zarejestrowany: 2011-04-25

Re: problem z wiatrakiem i acpi

http://dug.net.pl/tekst/225/

Dotyczy Cię fragment z Grub 2.

Offline

 

#7  2013-10-13 18:02:46

  Kovciu - Użytkownik

Kovciu
Użytkownik
Zarejestrowany: 2013-10-13

Re: problem z wiatrakiem i acpi

Witam, niestety to nie to. Problem pozostaje. To co zauważyłem że start systemu się zmienił po tej operacji, na początku bardzo dużo białych napisów i część z nich była odnosnie waring w acpi....

Offline

 

#8  2013-10-13 18:20:30

  yossarian - Szczawiożerca

yossarian
Szczawiożerca
Skąd: Shangri-La
Zarejestrowany: 2011-04-25

Re: problem z wiatrakiem i acpi

A jakieś konkrety podasz?

Komunikaty startowe zobaczysz tak:
http://dug.net.pl/tekst/229/komunikaty_startowe___l … artu_systemu/

Pokaż co masz w poleceniach Gruba i zawartość /var/log/Xorg.0.log

Najlepiej jakbyś sprawdzał na jądrze z backportów.

Offline

 

#9  2013-10-13 18:37:25

  Kovciu - Użytkownik

Kovciu
Użytkownik
Zarejestrowany: 2013-10-13

Re: problem z wiatrakiem i acpi

Log ze startu - jednak jak na moje oczy tu wszystkiego nie widać.... a nie jestem wstanie spamiętać co tam się odbywa... ale szereg poprostu białych napisów przed tym co tu wypisane...

Kod:

Sun Oct 13 18:25:19 2013: [ ok ] Setting parameters of disc: (none).
Sun Oct 13 18:25:19 2013: [ ok ] Setting preliminary keymap...done.
Sun Oct 13 18:25:19 2013: [ ok ] Activating swap...done.
Sun Oct 13 18:25:19 2013: [....] Checking root file system...fsck from util-linux 2.20.1
Sun Oct 13 18:25:19 2013: /dev/sda1: clean, 312202/45023232 files, 14594372/180061696 blocks
Sun Oct 13 18:25:19 2013: done.
Sun Oct 13 18:25:19 2013: [info] Loading kernel module loop.
Sun Oct 13 18:25:19 2013: [ ok ] Cleaning up temporary files... /tmp.
Sun Oct 13 18:25:19 2013: [ ok ] Activating lvm and md swap...done.
Sun Oct 13 18:25:19 2013: [....] Checking file systems...fsck from util-linux 2.20.1
Sun Oct 13 18:25:19 2013: done.
Sun Oct 13 18:25:19 2013: [ ok ] Mounting local filesystems...done.
Sun Oct 13 18:25:19 2013: [ ok ] Activating swapfile swap...done.
Sun Oct 13 18:25:19 2013: [ ok ] Cleaning up temporary files....
Sun Oct 13 18:25:19 2013: [ ok ] Setting kernel variables ...done.
Sun Oct 13 18:25:19 2013: [ ok ] Configuring network interfaces...done.
Sun Oct 13 18:25:20 2013: [ ok ] Starting rpcbind daemon....
Sun Oct 13 18:25:20 2013: [ ok ] Starting NFS common utilities: statd idmapd.
Sun Oct 13 18:25:20 2013: [ ok ] Cleaning up temporary files....
Sun Oct 13 18:25:20 2013: [ ok ] Setting up ALSA...done.
Sun Oct 13 18:25:21 2013: [info] Setting console screen modes.
Sun Oct 13 18:25:21 2013: [9;30][14;30][info] Skipping font and keymap setup (handled by console-setup).
Sun Oct 13 18:25:21 2013: [ ok ] Setting up console font and keymap...done.
Sun Oct 13 18:25:21 2013: [ ok ] Setting up X socket directories... /tmp/.X11-unix /tmp/.ICE-unix.
Sun Oct 13 18:25:21 2013: [ ok ] Setting sensors limits.
Sun Oct 13 18:25:21 2013: INIT: Entering runlevel: 2
Sun Oct 13 18:25:21 2013: [info] Using makefile-style concurrent boot in runlevel 2.
Sun Oct 13 18:25:21 2013: [ ok ] Starting NFS common utilities: statd idmapd.
Sun Oct 13 18:25:21 2013: [ ok ] Starting rpcbind daemon...[....] Already running..
Sun Oct 13 18:25:22 2013: [ ok ] Enabling additional executable binary formats: binfmt-support.
Sun Oct 13 18:25:22 2013: [ ok ] Starting enhanced syslogd: rsyslogd.
Sun Oct 13 18:25:22 2013: [ ok ] Starting anac(h)ronistic cron: anacron deferred while on battery power.
Sun Oct 13 18:25:22 2013: speech-dispatcher disabled; edit /etc/default/speech-dispatcher
Sun Oct 13 18:25:23 2013: [ ok ] Starting deferred execution scheduler: atd.
Sun Oct 13 18:25:23 2013: [ ok ] Starting acpi_fakekey daemon...done.
Sun Oct 13 18:25:23 2013: [ ok ] Starting ACPI services....
Sun Oct 13 18:25:23 2013: [ ok ] Loading cpufreq kernel modules...done (none).
Sun Oct 13 18:25:23 2013: [ ok ] CPUFreq Utilities: Setting ondemand CPUFreq governor...disabled, governor not available...done.
Sun Oct 13 18:25:25 2013: [ ok ] Starting automount....
Sun Oct 13 18:25:25 2013: [ ok ] Starting VirtualBox kernel modules:.
Sun Oct 13 18:25:25 2013: [ ok ] Starting periodic command scheduler: cron.
Sun Oct 13 18:25:25 2013: [ ok ] Starting MTA: exim4.
Sun Oct 13 18:25:26 2013: [ ok ] Starting system message bus: dbus.
Sun Oct 13 18:25:26 2013: [ ok ] Starting bluetooth: bluetoothd rfcomm.
Sun Oct 13 18:25:27 2013: [ ok ] Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon.
Sun Oct 13 18:25:27 2013: [ ok ] Starting network connection manager: NetworkManager.
Sun Oct 13 18:25:27 2013: [warn] PulseAudio configured for per-user sessions ... (warning).
Sun Oct 13 18:25:27 2013: saned disabled; edit /etc/default/saned
Sun Oct 13 18:25:27 2013: [ ok ] Starting GNOME Display Manager: gdm3.
Sun Oct 13 18:25:28 2013: [ ok ] Enabling power management...done.
Sun Oct 13 18:25:28 2013: [ ok ] Starting Common Unix Printing System: cupsd.

grub -> bez dodatku

Kod:

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
GRUB_TIMEOUT=5
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="option"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that $
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD .$
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports v$
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter $
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"

log z Xów

Kod:

[    24.467] 
X.Org X Server 1.12.4
Release Date: 2012-08-27
[    24.467] X Protocol Version 11, Revision 0
[    24.467] Build Operating System: Linux 3.2.0-4-amd64 x86_64 Debian
[    24.467] Current Operating System: Linux anon 3.11.4anon #1 SMP Sun Oct 6 20:20:28 CEST 2013 x86_64
[    24.467] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.11.4anon root=UUID=1c4820a8-c728-4a21-9472-652102156a8d ro option
[    24.467] Build Date: 17 April 2013  10:22:47AM
[    24.467] xorg-server 2:1.12.4-6 (Julien Cristau <jcristau@debian.org>) 
[    24.467] Current version of pixman: 0.26.0
[    24.467]     Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[    24.467] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    24.467] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Oct 13 18:25:31 2013
[    24.553] (==) Using config file: "/etc/X11/xorg.conf"
[    24.553] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    24.627] (==) ServerLayout "aticonfig Layout"
[    24.627] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[    24.627] (**) |   |-->Monitor "aticonfig-Monitor[0]-0"
[    24.627] (**) |   |-->Device "aticonfig-Device[0]-0"
[    24.627] (==) Automatically adding devices
[    24.627] (==) Automatically enabling devices
[    24.752] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    24.752]     Entry deleted from font path.
[    24.925] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[    24.925]     Entry deleted from font path.
[    24.925] (==) FontPath set to:
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/100dpi/:unscaled,
    /usr/share/fonts/X11/75dpi/:unscaled,
    /usr/share/fonts/X11/Type1,
    /usr/share/fonts/X11/100dpi,
    /usr/share/fonts/X11/75dpi,
    built-ins
[    24.925] (==) ModulePath set to "/usr/lib/xorg/modules"
[    24.925] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
[    24.925] (II) Loader magic: 0x7fde39c99ae0
[    24.925] (II) Module ABI versions:
[    24.925]     X.Org ANSI C Emulation: 0.4
[    24.925]     X.Org Video Driver: 12.1
[    24.925]     X.Org XInput driver : 16.0
[    24.925]     X.Org Server Extension : 6.0
[    24.926] (--) PCI:*(0:0:2:0) 8086:0166:1028:05b8 rev 9, Mem @ 0xc1000000/4194304, 0xb0000000/268435456, I/O @ 0x00004000/64
[    24.926] (--) PCI: (0:1:0:0) 1002:6601:1028:05b8 rev 0, Mem @ 0xa0000000/268435456, 0xc0000000/262144, I/O @ 0x00003000/256, BIOS @ 0x????????/131072
[    24.926] (II) Open ACPI successful (/var/run/acpid.socket)
[    24.926] (II) "extmod" will be loaded by default.
[    24.926] (II) "dbe" will be loaded by default.
[    24.926] (II) "glx" will be loaded by default.
[    24.926] (II) "record" will be loaded by default.
[    24.926] (II) "dri" will be loaded by default.
[    24.926] (II) "dri2" will be loaded by default.
[    24.926] (II) LoadModule: "extmod"
[    24.939] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    24.958] (II) Module extmod: vendor="X.Org Foundation"
[    24.958]     compiled for 1.12.4, module version = 1.0.0
[    24.958]     Module class: X.Org Server Extension
[    24.958]     ABI class: X.Org Server Extension, version 6.0
[    24.958] (II) Loading extension SELinux
[    24.958] (II) Loading extension MIT-SCREEN-SAVER
[    24.958] (II) Loading extension XFree86-VidModeExtension
[    24.958] (II) Loading extension XFree86-DGA
[    24.958] (II) Loading extension DPMS
[    24.958] (II) Loading extension XVideo
[    24.958] (II) Loading extension XVideo-MotionCompensation
[    24.958] (II) Loading extension X-Resource
[    24.958] (II) LoadModule: "dbe"
[    24.959] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    24.971] (II) Module dbe: vendor="X.Org Foundation"
[    24.971]     compiled for 1.12.4, module version = 1.0.0
[    24.971]     Module class: X.Org Server Extension
[    24.971]     ABI class: X.Org Server Extension, version 6.0
[    24.972] (II) Loading extension DOUBLE-BUFFER
[    24.972] (II) LoadModule: "glx"
[    24.972] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    24.990] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[    24.990]     compiled for 6.9.0, module version = 1.0.0
[    24.991] (II) Loading extension GLX
[    24.991] (II) LoadModule: "record"
[    24.991] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    24.991] (II) Module record: vendor="X.Org Foundation"
[    24.991]     compiled for 1.12.4, module version = 1.13.0
[    24.991]     Module class: X.Org Server Extension
[    24.991]     ABI class: X.Org Server Extension, version 6.0
[    24.991] (II) Loading extension RECORD
[    24.991] (II) LoadModule: "dri"
[    24.992] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    25.010] (II) Module dri: vendor="X.Org Foundation"
[    25.010]     compiled for 1.12.4, module version = 1.0.0
[    25.010]     ABI class: X.Org Server Extension, version 6.0
[    25.010] (II) Loading extension XFree86-DRI
[    25.010] (II) LoadModule: "dri2"
[    25.010] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    25.011] (II) Module dri2: vendor="X.Org Foundation"
[    25.011]     compiled for 1.12.4, module version = 1.2.0
[    25.011]     ABI class: X.Org Server Extension, version 6.0
[    25.011] (II) Loading extension DRI2
[    25.011] (II) LoadModule: "fglrx"
[    25.011] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[    25.924] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[    25.924]     compiled for 1.4.99.906, module version = 13.20.5
[    25.924]     Module class: X.Org Video Driver
[    25.934] (II) Loading sub module "fglrxdrm"
[    25.934] (II) LoadModule: "fglrxdrm"
[    25.934] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[    25.972] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[    25.972]     compiled for 1.4.99.906, module version = 13.20.5
[    25.972] (II) AMD Proprietary Linux Driver Version Identifier:13.20.5
[    25.972] (II) AMD Proprietary Linux Driver Release Identifier: UNSUPPORTED-13.20.11                 
[    25.972] (II) AMD Proprietary Linux Driver Build Date: Sep 21 2013 02:26:09
[    25.972] (++) using VT number 7

[    25.978] (WW) Falling back to old probe method for fglrx
[    26.062] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
[    26.093] ukiDynamicMajor: found major device number 251
[    26.093] ukiDynamicMajor: found major device number 251
[    26.093] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[    26.093] ukiOpenDevice: node name is /dev/ati/card0
[    26.093] ukiOpenDevice: open result is 8, (OK)
[    30.852] ukiOpenByBusid: ukiOpenMinor returns 8
[    30.852] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[    30.962] (--) Chipset Supported AMD Graphics Processor (0x6601) found
[    30.996] (II) fglrx: intel VGA device detected, load intel driver.
[    30.996] (II) LoadModule: "intel"
[    30.997] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    31.105] (II) Module intel: vendor="X.Org Foundation"
[    31.105]     compiled for 1.12.3.902, module version = 2.19.0
[    31.105]     Module class: X.Org Video Driver
[    31.105]     ABI class: X.Org Video Driver, version 12.1
[    31.106] (II) fglrx(0): pEnt->device->identifier=0x7fde3a3a3c20
[    31.108] (II) intel(1): pEnt->device->identifier=(nil)
[    31.108] (EE) Screen 1 deleted because of no matching config section.
[    31.108] (II) UnloadModule: "intel"
[    31.109] (II) fglrx(0): === [xdl_xs112_atiddxPreInit] === begin
[    31.109] (II) fglrx(0): PowerXpress: Discrete GPU is selected.
[    31.301] drmOpenDevice: node name is /dev/dri/card0
[    31.301] drmOpenDevice: open result is 10, (OK)
[    31.301] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[    31.301] drmOpenDevice: node name is /dev/dri/card0
[    31.302] drmOpenDevice: open result is 10, (OK)
[    31.302] drmOpenByBusid: drmOpenMinor returns 10
[    31.302] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[    31.302] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[    31.302] (==) fglrx(0): RGB weight 888
[    31.302] (==) fglrx(0): Default visual is TrueColor
[    31.302] (**) fglrx(0): Option "Tiling" "off"
[    31.302] (**) fglrx(0): Option "LinearFramebuffer" "on"
[    31.302] (**) fglrx(0): Option "Shadow" "off"
[    31.302] (II) fglrx(0): Integrated Graphics Chipset: Intel(R) Ivybridge Mobile (GT2)
[    31.302] (**) fglrx(0): ChipID override: 0x0166
[    31.302] (**) fglrx(0): ChipRev override: 9
[    31.302] (**) fglrx(0): Chipset: "Ivybridge Mobile (GT2)"
[    31.302] (**) fglrx(0): Relaxed fencing enabled
[    31.302] (**) fglrx(0): Wait on SwapBuffers? enabled
[    31.302] (**) fglrx(0): Triple buffering? enabled
[    31.302] (**) fglrx(0): Framebuffer linear
[    31.302] (**) fglrx(0): Pixmaps linear
[    31.302] (**) fglrx(0): 3D buffers tiled
[    31.314] (**) fglrx(0): SwapBuffers wait enabled
[    31.314] (==) fglrx(0): video overlay key set to 0x101fe
[    31.314] (II) fglrx(0): Output LVDS1 using monitor section aticonfig-Monitor[0]-0
[    31.314] (II) fglrx(0): found backlight control interface /sys/class/backlight/acpi_video0
[    31.344] (II) fglrx(0): Output VGA1 has no monitor section
[    31.344] (II) fglrx(0): Output HDMI1 has no monitor section
[    31.344] (II) fglrx(0): Output DP1 has no monitor section
[    31.344] (II) fglrx(0): EDID for output LVDS1
[    31.344] (II) fglrx(0): Manufacturer: LGD  Model: 3df  Serial#: 0
[    31.344] (II) fglrx(0): Year: 2012  Week: 0
[    31.344] (II) fglrx(0): EDID Version: 1.4
[    31.344] (II) fglrx(0): Digital Display Input
[    31.344] (II) fglrx(0): 6 bits per channel
[    31.344] (II) fglrx(0): Digital interface is undefined
[    31.344] (II) fglrx(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[    31.344] (II) fglrx(0): Gamma: 2.20
[    31.344] (II) fglrx(0): No DPMS capabilities specified
[    31.344] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    31.344] (II) fglrx(0): First detailed timing is preferred mode
[    31.344] (II) fglrx(0): Preferred mode is native pixel format and refresh rate
[    31.344] (II) fglrx(0): redX: 0.578 redY: 0.344   greenX: 0.337 greenY: 0.571
[    31.344] (II) fglrx(0): blueX: 0.159 blueY: 0.120   whiteX: 0.313 whiteY: 0.329
[    31.344] (II) fglrx(0): Manufacturer's mask: 0
[    31.344] (II) fglrx(0): Supported detailed timing:
[    31.344] (II) fglrx(0): clock: 76.8 MHz   Image Size:  344 x 194 mm
[    31.344] (II) fglrx(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1618 h_border: 0
[    31.345] (II) fglrx(0): v_active: 768  v_sync: 771  v_sync_end 776 v_blanking: 790 v_border: 0
[    31.345] (II) fglrx(0): Supported detailed timing:
[    31.345] (II) fglrx(0): clock: 51.2 MHz   Image Size:  344 x 194 mm
[    31.345] (II) fglrx(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1618 h_border: 0
[    31.345] (II) fglrx(0): v_active: 768  v_sync: 771  v_sync_end 776 v_blanking: 790 v_border: 0
[    31.345] (II) fglrx(0):  35T9M€156WHU
[    31.345] (II) fglrx(0): Unknown vendor-specific block 0
[    31.345] (II) fglrx(0): EDID (in hex):
[    31.345] (II) fglrx(0):     00ffffffffffff0030e4df0300000000
[    31.345] (II) fglrx(0):     00160104902213780a05f59458569228
[    31.345] (II) fglrx(0):     1e505400000001010101010101010101
[    31.345] (II) fglrx(0):     010101010101fb1d56fc500016303020
[    31.345] (II) fglrx(0):     350058c21000001afc1356fc50001630
[    31.345] (II) fglrx(0):     3020350058c21000001a000000fe0033
[    31.345] (II) fglrx(0):     3554394d803135365748550a00000000
[    31.345] (II) fglrx(0):     00004131940010000001010a202000a1
[    31.345] (II) fglrx(0): EDID vendor "LGD", prod id 991
[    31.345] (II) fglrx(0): Printing DDC gathered Modelines:
[    31.345] (II) fglrx(0): Modeline "1366x768"x0.0   76.75  1366 1414 1446 1618  768 771 776 790 +hsync -vsync (47.4 kHz eP)
[    31.345] (II) fglrx(0): Modeline "1366x768"x0.0   51.16  1366 1414 1446 1618  768 771 776 790 +hsync -vsync (31.6 kHz e)
[    31.345] (II) fglrx(0): Not using default mode "320x240" (doublescan mode not supported)
[    31.345] (II) fglrx(0): Not using default mode "400x300" (doublescan mode not supported)
[    31.345] (II) fglrx(0): Not using default mode "400x300" (doublescan mode not supported)
[    31.345] (II) fglrx(0): Not using default mode "512x384" (doublescan mode not supported)
[    31.345] (II) fglrx(0): Not using default mode "640x480" (doublescan mode not supported)
[    31.345] (II) fglrx(0): Not using default mode "640x512" (doublescan mode not supported)
[    31.345] (II) fglrx(0): Not using default mode "800x600" (doublescan mode not supported)
[    31.345] (II) fglrx(0): Not using default mode "896x672" (doublescan mode not supported)
[    31.345] (II) fglrx(0): Not using default mode "928x696" (doublescan mode not supported)
[    31.345] (II) fglrx(0): Not using default mode "960x720" (doublescan mode not supported)
[    31.345] (II) fglrx(0): Not using default mode "576x432" (doublescan mode not supported)
[    31.345] (II) fglrx(0): Not using default mode "680x384" (doublescan mode not supported)
[    31.345] (II) fglrx(0): Not using default mode "680x384" (doublescan mode not supported)
[    31.345] (II) fglrx(0): Not using default mode "700x525" (doublescan mode not supported)
[    31.345] (II) fglrx(0): Not using default mode "720x450" (doublescan mode not supported)
[    31.345] (II) fglrx(0): Not using default mode "800x512" (doublescan mode not supported)
[    31.345] (II) fglrx(0): Not using default mode "840x525" (doublescan mode not supported)
[    31.345] (II) fglrx(0): Not using default mode "840x525" (doublescan mode not supported)
[    31.345] (II) fglrx(0): Not using default mode "960x540" (doublescan mode not supported)
[    31.345] (II) fglrx(0): Not using default mode "960x600" (doublescan mode not supported)
[    31.345] (II) fglrx(0): Not using default mode "1024x768" (doublescan mode not supported)
[    31.345] (II) fglrx(0): Printing probed modes for output LVDS1
[    31.345] (II) fglrx(0): Modeline "1366x768"x60.0   76.75  1366 1414 1446 1618  768 771 776 790 +hsync -vsync (47.4 kHz eP)
[    31.345] (II) fglrx(0): Modeline "1366x768"x40.0   51.16  1366 1414 1446 1618  768 771 776 790 +hsync -vsync (31.6 kHz e)
[    31.345] (II) fglrx(0): Modeline "1360x768"x59.8   84.75  1360 1432 1568 1776  768 771 781 798 -hsync +vsync (47.7 kHz d)
[    31.345] (II) fglrx(0): Modeline "1360x768"x60.0   72.00  1360 1408 1440 1520  768 771 781 790 +hsync -vsync (47.4 kHz d)
[    31.345] (II) fglrx(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[    31.345] (II) fglrx(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[    31.346] (II) fglrx(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[    31.346] (II) fglrx(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[    31.376] (II) fglrx(0): EDID for output VGA1
[    31.376] (II) fglrx(0): EDID for output HDMI1
[    31.376] (II) fglrx(0): EDID for output DP1
[    31.376] (II) fglrx(0): Output LVDS1 connected
[    31.376] (II) fglrx(0): Output VGA1 disconnected
[    31.376] (II) fglrx(0): Output HDMI1 disconnected
[    31.376] (II) fglrx(0): Output DP1 disconnected
[    31.376] (II) fglrx(0): Using exact sizes for initial modes
[    31.376] (II) fglrx(0): Output LVDS1 using initial mode 1366x768
[    31.376] (II) fglrx(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    31.376] (II) fglrx(0): Kernel page flipping support detected, enabling
[    31.376] (**) fglrx(0): Display dimensions: (340, 190) mm
[    31.376] (**) fglrx(0): DPI set to (102, 102)
[    31.376] (II) Loading sub module "fb"
[    31.376] (II) LoadModule: "fb"
[    31.376] (II) Loading /usr/lib/xorg/modules/libfb.so
[    31.386] (II) Module fb: vendor="X.Org Foundation"
[    31.386]     compiled for 1.12.4, module version = 1.0.0
[    31.386]     ABI class: X.Org ANSI C Emulation, version 0.4
[    31.386] (II) Loading sub module "dri2"
[    31.386] (II) LoadModule: "dri2"
[    31.386] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    31.386] (II) Module dri2: vendor="X.Org Foundation"
[    31.386]     compiled for 1.12.4, module version = 1.2.0
[    31.386]     ABI class: X.Org Server Extension, version 6.0
[    31.386] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[    31.386] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[    31.386] (==) fglrx(0): Default visual is TrueColor
[    31.386] (**) fglrx(0): Option "DPMS" "true"
[    31.386] (==) fglrx(0): RGB weight 888
[    31.386] (II) fglrx(0): Using 8 bits per RGB 
[    31.386] (==) fglrx(0): Buffer Tiling is ON
[    31.386] (II) Loading sub module "fglrxdrm"
[    31.386] (II) LoadModule: "fglrxdrm"
[    31.386] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[    31.386] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[    31.386]     compiled for 1.4.99.906, module version = 13.20.5
[    31.388] ukiDynamicMajor: found major device number 251
[    31.388] ukiDynamicMajor: found major device number 251
[    31.388] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[    31.388] ukiOpenDevice: node name is /dev/ati/card0
[    31.388] ukiOpenDevice: open result is 11, (OK)
[    31.388] ukiOpenByBusid: ukiOpenMinor returns 11
[    31.388] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[    31.388] (**) fglrx(0): NoAccel = NO
[    31.388] (**) fglrx(0): AMD 2D Acceleration Architecture enabled
[    31.388] (--) fglrx(0): Chipset: "AMD Radeon (TM) HD 8500M/8700M" (Chipset = 0x6601)
[    31.388] (--) fglrx(0): (PciSubVendor = 0x1028, PciSubDevice = 0x05b8)
[    31.388] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
[    31.388] (--) fglrx(0): Linear framebuffer (phys) at 0xa0000000
[    31.388] (--) fglrx(0): MMIO registers at 0xc0000000
[    31.388] (--) fglrx(0): I/O port at 0x00003000
[    31.388] (==) fglrx(0): ROM-BIOS at 0x000c0000
[    31.401] (II) fglrx(0): Battery is used
[    31.401] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
[    31.401] (--) fglrx(0): Video RAM: 2097152 kByte, Type: DDR3
[    31.401] (II) fglrx(0): PCIE card detected
[    31.401] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[    31.401] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[    31.415] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf400000000, MCFBSize = 0x80000000)
[    31.415] (II) fglrx(0): RandR 1.2 support is enabled!
[    31.415] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[    31.415] (==) fglrx(0): Center Mode is disabled 
[    31.415] (II) Loading sub module "fb"
[    31.415] (II) LoadModule: "fb"
[    31.415] (II) Loading /usr/lib/xorg/modules/libfb.so
[    31.416] (II) Module fb: vendor="X.Org Foundation"
[    31.416]     compiled for 1.12.4, module version = 1.0.0
[    31.416]     ABI class: X.Org ANSI C Emulation, version 0.4
[    31.416] (II) Loading sub module "ddc"
[    31.416] (II) LoadModule: "ddc"
[    31.416] (II) Module "ddc" already built-in
[    31.519] (II) fglrx(0): Adapter AMD Radeon (TM) HD 8500M/8700M has 2 configurable heads and 0 displays connected.
[    31.519] (==) fglrx(0):  PseudoColor visuals disabled
[    31.520] (II) Loading sub module "ramdac"
[    31.520] (II) LoadModule: "ramdac"
[    31.520] (II) Module "ramdac" already built-in
[    31.520] (==) fglrx(0): NoDRI = NO
[    31.520] (==) fglrx(0): Capabilities: 0x00000000
[    31.520] (==) fglrx(0): CapabilitiesEx: 0x00000000
[    31.520] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[    31.520] (==) fglrx(0): UseFastTLS=0
[    31.520] (II) fglrx(0): TearFreeDesktop is not supported on PowerXpress systems currently.
[    31.520] (--) Depth 24 pixmap format is 32 bpp
[    31.520] (II) LoadModule: "glesx"
[    31.520] (II) Loading /usr/lib/xorg/modules/glesx.so
[    31.695] (II) Module glesx: vendor="X.Org Foundation"
[    31.695]     compiled for 1.4.99.906, module version = 1.0.0
[    31.695] (II) Loading extension GLESX
[    31.722] (II) fglrx(0): [DRI2] Setup complete
[    31.722] (II) fglrx(0): [DRI2]   DRI driver: i965
[    31.722] (II) fglrx(0): Allocated new frame buffer 1408x768 stride 5632, untiled
[    31.726] (II) UXA(0): Driver registered support for the following operations:
[    31.726] (II)         solid
[    31.726] (II)         copy
[    31.726] (II)         composite (RENDER acceleration)
[    31.726] (II)         put_image
[    31.726] (II)         get_image
[    31.726] (==) fglrx(0): Backing store disabled
[    31.726] (==) fglrx(0): Silken mouse enabled
[    31.726] (II) fglrx(0): Initializing HW Cursor
[    31.726] (II) fglrx(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    31.727] (**) fglrx(0): DPMS enabled
[    31.727] (==) fglrx(0): Intel XvMC decoder enabled
[    31.727] (II) fglrx(0): Set up textured video
[    31.727] (II) fglrx(0): [XvMC] xvmc_vld driver initialized.
[    31.727] (II) fglrx(0): direct rendering: DRI2 Enabled
[    31.727] (WW) fglrx(0): Option "VendorName" is not used
[    31.727] (WW) fglrx(0): Option "ModelName" is not used
[    31.727] (WW) fglrx(0): Option "Shadow" is not used
[    31.727] (WW) fglrx(0): Option "Tiling" is not used
[    31.727] (WW) fglrx(0): Option "LinearFramebuffer" is not used
[    31.727] (==) fglrx(0): hotplug detection: "enabled"
[    31.768] (II) Loading extension ATIFGLRXDRI
[    31.768] (II) fglrx(0): doing swlDriScreenInit
[    31.768] (II) fglrx(0): swlDriScreenInit for fglrx driver
[    31.768] ukiDynamicMajor: found major device number 251
[    31.768] ukiDynamicMajor: found major device number 251
[    31.768] ukiDynamicMajor: found major device number 251
[    31.768] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[    31.768] ukiOpenDevice: node name is /dev/ati/card0
[    31.768] ukiOpenDevice: open result is 13, (OK)
[    31.768] ukiOpenByBusid: ukiOpenMinor returns 13
[    31.768] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[    31.768] (II) fglrx(0): [uki] DRM interface version 1.0
[    31.768] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
[    31.768] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[    31.768] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7fde338f2000
[    31.768] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[    31.769] (II) fglrx(0): [uki] added 1 reserved context for kernel
[    31.769] (II) fglrx(0): swlDriScreenInit done
[    31.769] (II) fglrx(0): Kernel Module Version Information:
[    31.769] (II) fglrx(0):     Name: fglrx
[    31.769] (II) fglrx(0):     Version: 13.20.5
[    31.769] (II) fglrx(0):     Date: Sep 21 2013
[    31.769] (II) fglrx(0):     Desc: AMD FireGL DRM kernel module
[    31.769] (II) fglrx(0): Kernel Module version matches driver.
[    31.769] (II) fglrx(0): Kernel Module Build Time Information:
[    31.769] (II) fglrx(0):     Build-Kernel UTS_RELEASE:        3.11.4anon
[    31.769] (II) fglrx(0):     Build-Kernel MODVERSIONS:        yes
[    31.769] (II) fglrx(0):     Build-Kernel __SMP__:            yes
[    31.769] (II) fglrx(0):     Build-Kernel PAGE_SIZE:          0x1000
[    31.769] (II) fglrx(0): [uki] register handle = 0x00004000
[    31.794] (II) fglrx(0): DRI initialization successfull
[    31.794] (II) fglrx(0): FBADPhys: 0xf400000000 FBMappedSize: 0x01080000
[    31.795] (II) fglrx(0): Intel display surface mc addr for AMD: ffefce0000
[    31.795] (==) fglrx(0): Backing store disabled
[    31.795] (II) Loading extension FGLRXEXTENSION
[    31.795] (**) fglrx(0): DPMS enabled
[    31.795] (II) fglrx(0): Initialized in-driver Xinerama extension
[    31.795] (**) fglrx(0): Textured Video is enabled.
[    31.796] (II) fglrx(0): GLESX enableFlags = 848
[    31.796] (II) fglrx(0): GLESX is enabled
[    31.796] (II) LoadModule: "amdxmm"
[    31.796] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[    31.857] (II) Module amdxmm: vendor="X.Org Foundation"
[    31.857]     compiled for 1.4.99.906, module version = 2.0.0
[    31.858] (II) Loading extension AMDXVOPL
[    31.858] (II) Loading extension AMDXVBA
[    31.858] XvScreenInit: screen devPrivates ptr non-NULL before init
[    31.869] (II) fglrx(0): UVD feature is enabled(II) fglrx(0): 
[    31.870] (II) fglrx(0): Enable composite support successfully
[    31.870] (WW) fglrx(0): Option "VendorName" is not used
[    31.870] (WW) fglrx(0): Option "ModelName" is not used
[    31.870] (WW) fglrx(0): Option "Shadow" is not used
[    31.870] (WW) fglrx(0): Option "Tiling" is not used
[    31.870] (WW) fglrx(0): Option "LinearFramebuffer" is not used
[    31.870] (II) fglrx(0): X context handle = 0x1
[    31.870] (II) fglrx(0): [DRI] installation complete
[    31.872] (--) RandR disabled
[    31.872] (II) Initializing built-in extension Generic Event Extension
[    31.872] (II) Initializing built-in extension SHAPE
[    31.872] (II) Initializing built-in extension MIT-SHM
[    31.872] (II) Initializing built-in extension XInputExtension
[    31.872] (II) Initializing built-in extension XTEST
[    31.872] (II) Initializing built-in extension BIG-REQUESTS
[    31.872] (II) Initializing built-in extension SYNC
[    31.872] (II) Initializing built-in extension XKEYBOARD
[    31.872] (II) Initializing built-in extension XC-MISC
[    31.872] (II) Initializing built-in extension SECURITY
[    31.872] (II) Initializing built-in extension XINERAMA
[    31.872] (II) Initializing built-in extension XFIXES
[    31.872] (II) Initializing built-in extension RENDER
[    31.872] (II) Initializing built-in extension RANDR
[    31.872] (II) Initializing built-in extension COMPOSITE
[    31.872] (II) Initializing built-in extension DAMAGE
[    31.872] (II) SELinux: Disabled on system
[    31.873] ukiDynamicMajor: found major device number 251
[    31.873] ukiDynamicMajor: found major device number 251
[    31.874] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[    31.874] ukiOpenDevice: node name is /dev/ati/card0
[    31.874] ukiOpenDevice: open result is 14, (OK)
[    31.874] ukiOpenByBusid: ukiOpenMinor returns 14
[    31.874] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[    32.309] ukiDynamicMajor: found major device number 251
[    32.309] ukiDynamicMajor: found major device number 251
[    32.310] ukiDynamicMajor: found major device number 251
[    32.310] ukiOpenDevice: node name is /dev/ati/card0
[    32.310] ukiOpenDevice: open result is 15, (OK)
[    32.310] ukiGetBusid returned 'PCI:1:0:0'
[    32.310] ukiOpenDevice: node name is /dev/ati/card1
[    32.310] ukiOpenDevice: open result is -1, (No such device)
[    32.310] ukiOpenDevice: open result is -1, (No such device)
[    32.310] ukiOpenDevice: Open failed
[    32.310] ukiOpenDevice: node name is /dev/ati/card2
[    32.310] ukiOpenDevice: open result is -1, (No such device)
[    32.310] ukiOpenDevice: open result is -1, (No such device)
[    32.310] ukiOpenDevice: Open failed
[    32.310] ukiOpenDevice: node name is /dev/ati/card3
[    32.310] ukiOpenDevice: open result is -1, (No such device)
[    32.310] ukiOpenDevice: open result is -1, (No such device)
[    32.310] ukiOpenDevice: Open failed
[    32.310] ukiOpenDevice: node name is /dev/ati/card4
[    32.310] ukiOpenDevice: open result is -1, (No such device)
[    32.310] ukiOpenDevice: open result is -1, (No such device)
[    32.310] ukiOpenDevice: Open failed
[    32.310] ukiOpenDevice: node name is /dev/ati/card5
[    32.310] ukiOpenDevice: open result is -1, (No such device)
[    32.310] ukiOpenDevice: open result is -1, (No such device)
[    32.310] ukiOpenDevice: Open failed
[    32.310] ukiOpenDevice: node name is /dev/ati/card6
[    32.310] ukiOpenDevice: open result is -1, (No such device)
[    32.310] ukiOpenDevice: open result is -1, (No such device)
[    32.310] ukiOpenDevice: Open failed
[    32.310] ukiOpenDevice: node name is /dev/ati/card7
[    32.310] ukiOpenDevice: open result is -1, (No such device)
[    32.311] ukiOpenDevice: open result is -1, (No such device)
[    32.311] ukiOpenDevice: Open failed
[    32.311] ukiOpenDevice: node name is /dev/ati/card8
[    32.311] ukiOpenDevice: open result is -1, (No such device)
[    32.311] ukiOpenDevice: open result is -1, (No such device)
[    32.311] ukiOpenDevice: Open failed
[    32.311] ukiOpenDevice: node name is /dev/ati/card9
[    32.311] ukiOpenDevice: open result is -1, (No such device)
[    32.311] ukiOpenDevice: open result is -1, (No such device)
[    32.311] ukiOpenDevice: Open failed
[    32.311] ukiOpenDevice: node name is /dev/ati/card10
[    32.311] ukiOpenDevice: open result is -1, (No such device)
[    32.311] ukiOpenDevice: open result is -1, (No such device)
[    32.311] ukiOpenDevice: Open failed
[    32.311] ukiOpenDevice: node name is /dev/ati/card11
[    32.311] ukiOpenDevice: open result is -1, (No such device)
[    32.311] ukiOpenDevice: open result is -1, (No such device)
[    32.311] ukiOpenDevice: Open failed
[    32.311] ukiOpenDevice: node name is /dev/ati/card12
[    32.311] ukiOpenDevice: open result is -1, (No such device)
[    32.311] ukiOpenDevice: open result is -1, (No such device)
[    32.311] ukiOpenDevice: Open failed
[    32.311] ukiOpenDevice: node name is /dev/ati/card13
[    32.311] ukiOpenDevice: open result is -1, (No such device)
[    32.311] ukiOpenDevice: open result is -1, (No such device)
[    32.311] ukiOpenDevice: Open failed
[    32.311] ukiOpenDevice: node name is /dev/ati/card14
[    32.311] ukiOpenDevice: open result is -1, (No such device)
[    32.311] ukiOpenDevice: open result is -1, (No such device)
[    32.311] ukiOpenDevice: Open failed
[    32.311] ukiOpenDevice: node name is /dev/ati/card15
[    32.311] ukiOpenDevice: open result is -1, (No such device)
[    32.311] ukiOpenDevice: open result is -1, (No such device)
[    32.311] ukiOpenDevice: Open failed
[    32.311] ukiDynamicMajor: found major device number 251
[    32.311] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[    32.311] ukiOpenDevice: node name is /dev/ati/card0
[    32.311] ukiOpenDevice: open result is 15, (OK)
[    32.311] ukiOpenByBusid: ukiOpenMinor returns 15
[    32.311] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[    32.892] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[    32.893] ukiDynamicMajor: found major device number 251
[    32.894] ukiDynamicMajor: found major device number 251
[    32.894] ukiDynamicMajor: found major device number 251
[    32.894] ukiOpenDevice: node name is /dev/ati/card0
[    32.894] ukiOpenDevice: open result is 16, (OK)
[    32.894] ukiGetBusid returned 'PCI:1:0:0'
[    32.894] ukiOpenDevice: node name is /dev/ati/card1
[    32.894] ukiOpenDevice: open result is -1, (No such device)
[    32.894] ukiOpenDevice: open result is -1, (No such device)
[    32.894] ukiOpenDevice: Open failed
[    32.894] ukiOpenDevice: node name is /dev/ati/card2
[    32.894] ukiOpenDevice: open result is -1, (No such device)
[    32.894] ukiOpenDevice: open result is -1, (No such device)
[    32.894] ukiOpenDevice: Open failed
[    32.894] ukiOpenDevice: node name is /dev/ati/card3
[    32.894] ukiOpenDevice: open result is -1, (No such device)
[    32.894] ukiOpenDevice: open result is -1, (No such device)
[    32.894] ukiOpenDevice: Open failed
[    32.894] ukiOpenDevice: node name is /dev/ati/card4
[    32.894] ukiOpenDevice: open result is -1, (No such device)
[    32.894] ukiOpenDevice: open result is -1, (No such device)
[    32.894] ukiOpenDevice: Open failed
[    32.894] ukiOpenDevice: node name is /dev/ati/card5
[    32.894] ukiOpenDevice: open result is -1, (No such device)
[    32.895] ukiOpenDevice: open result is -1, (No such device)
[    32.895] ukiOpenDevice: Open failed
[    32.895] ukiOpenDevice: node name is /dev/ati/card6
[    32.895] ukiOpenDevice: open result is -1, (No such device)
[    32.895] ukiOpenDevice: open result is -1, (No such device)
[    32.895] ukiOpenDevice: Open failed
[    32.895] ukiOpenDevice: node name is /dev/ati/card7
[    32.895] ukiOpenDevice: open result is -1, (No such device)
[    32.895] ukiOpenDevice: open result is -1, (No such device)
[    32.895] ukiOpenDevice: Open failed
[    32.895] ukiOpenDevice: node name is /dev/ati/card8
[    32.895] ukiOpenDevice: open result is -1, (No such device)
[    32.895] ukiOpenDevice: open result is -1, (No such device)
[    32.895] ukiOpenDevice: Open failed
[    32.895] ukiOpenDevice: node name is /dev/ati/card9
[    32.895] ukiOpenDevice: open result is -1, (No such device)
[    32.895] ukiOpenDevice: open result is -1, (No such device)
[    32.895] ukiOpenDevice: Open failed
[    32.895] ukiOpenDevice: node name is /dev/ati/card10
[    32.895] ukiOpenDevice: open result is -1, (No such device)
[    32.895] ukiOpenDevice: open result is -1, (No such device)
[    32.895] ukiOpenDevice: Open failed
[    32.895] ukiOpenDevice: node name is /dev/ati/card11
[    32.895] ukiOpenDevice: open result is -1, (No such device)
[    32.895] ukiOpenDevice: open result is -1, (No such device)
[    32.895] ukiOpenDevice: Open failed
[    32.895] ukiOpenDevice: node name is /dev/ati/card12
[    32.895] ukiOpenDevice: open result is -1, (No such device)
[    32.895] ukiOpenDevice: open result is -1, (No such device)
[    32.895] ukiOpenDevice: Open failed
[    32.895] ukiOpenDevice: node name is /dev/ati/card13
[    32.895] ukiOpenDevice: open result is -1, (No such device)
[    32.895] ukiOpenDevice: open result is -1, (No such device)
[    32.895] ukiOpenDevice: Open failed
[    32.895] ukiOpenDevice: node name is /dev/ati/card14
[    32.895] ukiOpenDevice: open result is -1, (No such device)
[    32.896] ukiOpenDevice: open result is -1, (No such device)
[    32.896] ukiOpenDevice: Open failed
[    32.896] ukiOpenDevice: node name is /dev/ati/card15
[    32.896] ukiOpenDevice: open result is -1, (No such device)
[    32.896] ukiOpenDevice: open result is -1, (No such device)
[    32.896] ukiOpenDevice: Open failed
[    32.896] ukiDynamicMajor: found major device number 251
[    32.896] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[    32.896] ukiOpenDevice: node name is /dev/ati/card0
[    32.896] ukiOpenDevice: open result is 16, (OK)
[    32.896] ukiOpenByBusid: ukiOpenMinor returns 16
[    32.896] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[    33.026] (II) fglrx(0): Setting screen physical size to 361 x 203
[    33.657] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    33.657] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    33.657] (II) LoadModule: "evdev"
[    33.689] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    33.700] (II) Module evdev: vendor="X.Org Foundation"
[    33.700]     compiled for 1.12.1, module version = 2.7.0
[    33.700]     Module class: X.Org XInput Driver
[    33.700]     ABI class: X.Org XInput driver, version 16.0
[    33.700] (II) Using input driver 'evdev' for 'Power Button'
[    33.700] (**) Power Button: always reports core events
[    33.700] (**) evdev: Power Button: Device: "/dev/input/event3"
[    33.700] (--) evdev: Power Button: Vendor 0 Product 0x1
[    33.700] (--) evdev: Power Button: Found keys
[    33.700] (II) evdev: Power Button: Configuring as keyboard
[    33.701] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[    33.701] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    33.701] (**) Option "xkb_rules" "evdev"
[    33.701] (**) Option "xkb_model" "pc105"
[    33.701] (**) Option "xkb_layout" "pl"
[    33.775] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[    33.775] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    33.775] (II) Using input driver 'evdev' for 'Video Bus'
[    33.775] (**) Video Bus: always reports core events
[    33.775] (**) evdev: Video Bus: Device: "/dev/input/event8"
[    33.775] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    33.775] (--) evdev: Video Bus: Found keys
[    33.775] (II) evdev: Video Bus: Configuring as keyboard
[    33.775] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input8/event8"
[    33.775] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    33.775] (**) Option "xkb_rules" "evdev"
[    33.775] (**) Option "xkb_model" "pc105"
[    33.775] (**) Option "xkb_layout" "pl"
[    33.776] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    33.776] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    33.776] (II) Using input driver 'evdev' for 'Power Button'
[    33.776] (**) Power Button: always reports core events
[    33.776] (**) evdev: Power Button: Device: "/dev/input/event1"
[    33.776] (--) evdev: Power Button: Vendor 0 Product 0x1
[    33.776] (--) evdev: Power Button: Found keys
[    33.776] (II) evdev: Power Button: Configuring as keyboard
[    33.776] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0C:00/input/input1/event1"
[    33.776] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[    33.776] (**) Option "xkb_rules" "evdev"
[    33.776] (**) Option "xkb_model" "pc105"
[    33.776] (**) Option "xkb_layout" "pl"
[    33.777] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[    33.777] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    33.777] (II) Using input driver 'evdev' for 'Video Bus'
[    33.777] (**) Video Bus: always reports core events
[    33.777] (**) evdev: Video Bus: Device: "/dev/input/event7"
[    33.777] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    33.777] (--) evdev: Video Bus: Found keys
[    33.777] (II) evdev: Video Bus: Configuring as keyboard
[    33.777] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2c/LNXVIDEO:00/input/input7/event7"
[    33.777] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 9)
[    33.777] (**) Option "xkb_rules" "evdev"
[    33.777] (**) Option "xkb_model" "pc105"
[    33.777] (**) Option "xkb_layout" "pl"
[    33.777] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[    33.777] (II) No input driver specified, ignoring this device.
[    33.777] (II) This device may have been added with another device file.
[    33.778] (II) config/udev: Adding input device ELAN Touchscreen (/dev/input/event12)
[    33.778] (**) ELAN Touchscreen: Applying InputClass "evdev touchscreen catchall"
[    33.778] (II) Using input driver 'evdev' for 'ELAN Touchscreen'
[    33.778] (**) ELAN Touchscreen: always reports core events
[    33.778] (**) evdev: ELAN Touchscreen: Device: "/dev/input/event12"
[    33.778] (--) evdev: ELAN Touchscreen: Vendor 0x4f3 Product 0x34
[    33.778] (--) evdev: ELAN Touchscreen: Found absolute axes
[    33.778] (--) evdev: ELAN Touchscreen: Found x and y absolute axes
[    33.778] (--) evdev: ELAN Touchscreen: Found absolute touchscreen
[    33.778] (II) evdev: ELAN Touchscreen: Configuring as touchscreen
[    33.778] (**) evdev: ELAN Touchscreen: YAxisMapping: buttons 4 and 5
[    33.778] (**) evdev: ELAN Touchscreen: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    33.778] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/input/input12/event12"
[    33.778] (II) XINPUT: Adding extended input device "ELAN Touchscreen" (type: TOUCHSCREEN, id 10)
[    33.778] (II) evdev: ELAN Touchscreen: initialized for absolute axes.
[    33.778] (**) ELAN Touchscreen: (accel) keeping acceleration scheme 1
[    33.778] (**) ELAN Touchscreen: (accel) acceleration profile 0
[    33.778] (**) ELAN Touchscreen: (accel) acceleration factor: 2.000
[    33.778] (**) ELAN Touchscreen: (accel) acceleration threshold: 4
[    33.779] (II) config/udev: Adding input device ELAN Touchscreen (/dev/input/mouse1)
[    33.779] (II) No input driver specified, ignoring this device.
[    33.779] (II) This device may have been added with another device file.
[    33.779] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event10)
[    33.779] (II) No input driver specified, ignoring this device.
[    33.779] (II) This device may have been added with another device file.
[    33.779] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event11)
[    33.779] (II) No input driver specified, ignoring this device.
[    33.779] (II) This device may have been added with another device file.
[    33.779] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event9)
[    33.779] (II) No input driver specified, ignoring this device.
[    33.779] (II) This device may have been added with another device file.
[    33.780] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    33.780] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    33.780] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    33.780] (**) AT Translated Set 2 keyboard: always reports core events
[    33.780] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[    33.780] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    33.780] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    33.780] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    33.780] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    33.780] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[    33.780] (**) Option "xkb_rules" "evdev"
[    33.780] (**) Option "xkb_model" "pc105"
[    33.780] (**) Option "xkb_layout" "pl"
[    33.780] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event6)
[    33.780] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[    33.781] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[    33.781] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[    33.781] (II) LoadModule: "synaptics"
[    33.781] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    33.819] (II) Module synaptics: vendor="X.Org Foundation"
[    33.819]     compiled for 1.12.4, module version = 1.6.2
[    33.819]     Module class: X.Org XInput Driver
[    33.819]     ABI class: X.Org XInput driver, version 16.0
[    33.819] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[    33.819] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    33.819] (**) Option "Device" "/dev/input/event6"
[    33.880] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5674
[    33.880] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4754
[    33.880] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[    33.880] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[    33.880] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[    33.880] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[    33.880] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    33.880] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    33.936] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input6/event6"
[    33.936] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
[    33.936] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[    33.936] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[    33.936] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.037
[    33.936] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[    33.936] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[    33.936] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    33.936] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    33.936] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    33.936] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[    33.936] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[    33.937] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[    33.937] (II) No input driver specified, ignoring this device.
[    33.937] (II) This device may have been added with another device file.
[    33.937] (II) config/udev: Adding input device ACPI Virtual Keyboard Device (/dev/input/event13)
[    33.937] (**) ACPI Virtual Keyboard Device: Applying InputClass "evdev keyboard catchall"
[    33.937] (II) Using input driver 'evdev' for 'ACPI Virtual Keyboard Device'
[    33.937] (**) ACPI Virtual Keyboard Device: always reports core events
[    33.937] (**) evdev: ACPI Virtual Keyboard Device: Device: "/dev/input/event13"
[    33.937] (--) evdev: ACPI Virtual Keyboard Device: Vendor 0 Product 0
[    33.937] (--) evdev: ACPI Virtual Keyboard Device: Found keys
[    33.937] (II) evdev: ACPI Virtual Keyboard Device: Configuring as keyboard
[    33.937] (**) Option "config_info" "udev:/sys/devices/virtual/input/input13/event13"
[    33.937] (II) XINPUT: Adding extended input device "ACPI Virtual Keyboard Device" (type: KEYBOARD, id 13)
[    33.937] (**) Option "xkb_rules" "evdev"
[    33.937] (**) Option "xkb_model" "pc105"
[    33.937] (**) Option "xkb_layout" "pl"
[    33.938] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event5)
[    33.938] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[    33.938] (II) Using input driver 'evdev' for 'Dell WMI hotkeys'
[    33.938] (**) Dell WMI hotkeys: always reports core events
[    33.938] (**) evdev: Dell WMI hotkeys: Device: "/dev/input/event5"
[    33.938] (--) evdev: Dell WMI hotkeys: Vendor 0 Product 0
[    33.938] (--) evdev: Dell WMI hotkeys: Found keys
[    33.938] (II) evdev: Dell WMI hotkeys: Configuring as keyboard
[    33.938] (**) Option "config_info" "udev:/sys/devices/virtual/input/input5/event5"
[    33.938] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 14)
[    33.938] (**) Option "xkb_rules" "evdev"
[    33.938] (**) Option "xkb_model" "pc105"
[    33.938] (**) Option "xkb_layout" "pl"
[    33.968] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[    33.994] (II) fglrx(0): EDID vendor "LGD", prod id 991
[    33.994] (II) fglrx(0): Printing DDC gathered Modelines:
[    33.994] (II) fglrx(0): Modeline "1366x768"x0.0   76.75  1366 1414 1446 1618  768 771 776 790 +hsync -vsync (47.4 kHz eP)
[    33.994] (II) fglrx(0): Modeline "1366x768"x0.0   51.16  1366 1414 1446 1618  768 771 776 790 +hsync -vsync (31.6 kHz e)
[    38.760] (II) fglrx(0): EDID vendor "LGD", prod id 991
[    38.760] (II) fglrx(0): Printing DDC gathered Modelines:
[    38.760] (II) fglrx(0): Modeline "1366x768"x0.0   76.75  1366 1414 1446 1618  768 771 776 790 +hsync -vsync (47.4 kHz eP)
[    38.760] (II) fglrx(0): Modeline "1366x768"x0.0   51.16  1366 1414 1446 1618  768 771 776 790 +hsync -vsync (31.6 kHz e)
[    52.310] (II) fglrx(0): EDID vendor "LGD", prod id 991
[    52.310] (II) fglrx(0): Printing DDC gathered Modelines:
[    52.310] (II) fglrx(0): Modeline "1366x768"x0.0   76.75  1366 1414 1446 1618  768 771 776 790 +hsync -vsync (47.4 kHz eP)
[    52.310] (II) fglrx(0): Modeline "1366x768"x0.0   51.16  1366 1414 1446 1618  768 771 776 790 +hsync -vsync (31.6 kHz e)
[    53.547] (II) fglrx(0): EDID vendor "LGD", prod id 991
[    53.547] (II) fglrx(0): Printing DDC gathered Modelines:
[    53.547] (II) fglrx(0): Modeline "1366x768"x0.0   76.75  1366 1414 1446 1618  768 771 776 790 +hsync -vsync (47.4 kHz eP)
[    53.547] (II) fglrx(0): Modeline "1366x768"x0.0   51.16  1366 1414 1446 1618  768 771 776 790 +hsync -vsync (31.6 kHz e)
[    56.299] (II) fglrx(0): EDID vendor "LGD", prod id 991
[    56.299] (II) fglrx(0): Printing DDC gathered Modelines:
[    56.299] (II) fglrx(0): Modeline "1366x768"x0.0   76.75  1366 1414 1446 1618  768 771 776 790 +hsync -vsync (47.4 kHz eP)
[    56.299] (II) fglrx(0): Modeline "1366x768"x0.0   51.16  1366 1414 1446 1618  768 771 776 790 +hsync -vsync (31.6 kHz e)

Myśle by spróbować na sida jeszcez raz... ale sie boje ze mi sie rozjedzie wszystko...

Jednak myślę nad Jessie, jednak sie boje że strace gnome shell itp.... kiedyś już tak miałem, jak to najlepiej wykonać?
To chyba najlepiej rozwiąże moje problemy....

Ostatnio edytowany przez Kovciu (2013-10-13 19:55:34)

Offline

 

#10  2013-10-14 22:49:24

  Kovciu - Użytkownik

Kovciu
Użytkownik
Zarejestrowany: 2013-10-13

Re: problem z wiatrakiem i acpi

Czyżby sprawa nie do rozwiązania?

pozdrawiam

Offline

 

#11  2013-10-14 23:46:14

  krasnij - oj tam

krasnij
oj tam
Skąd: z JO73VT
Zarejestrowany: 2012-05-04
Serwis

Re: problem z wiatrakiem i acpi

Z ciekawości, co do wiatraka.

Na windowsie ten problem też występuje?
Znany mi przypadek della inspirona 3521, gdzie takie coś się na windowsie działo.
Problem rozwiązała aktualizacja biosu.


Pozdrawiam i życzę sukcesów :)
The truth is out there.

Offline

 

#12  2013-10-15 00:13:47

  Kovciu - Użytkownik

Kovciu
Użytkownik
Zarejestrowany: 2013-10-13

Re: problem z wiatrakiem i acpi

Witam,

no właśnie z tego co pracowalem na windzie troszku to tego nie było, tylko na linuxie..... na linku tez to jest tak ze raz szumi ciagle, raz faktycznie jak potrzeba, czasem sie zalacza dopiero przy 55st.... potem ciagle chodzi.... nie moge znaleźć przyczyny szumu... to mnie boli.... sprobuje zaktualizowac bios, moze to coś da... bo mnie k. bierze jak slysze ten szum i męczy przez to by isc na 7ke... czego poprostu nie chce! Tylko jak linuxa ogarnac do konca... Ciagle mysle by isc na testing, lecz jak robie dist-upgrade to pokazuje ze wywali gnoma shell, czyli sie nie ogarnę..... nie wiem jak to ugryźć poprostu przez to daje posty na forum...


EDIT:

małe pytanie... jak ja mam zaktualizowac bios

http://www.dell.com/support/drivers/pl/pl/pldhs1/Dr … categoryId=BI

bo za ... nie wiem ;/ (pod winda bez problemu ale debianem?!)

pozdr

Ostatnio edytowany przez Kovciu (2013-10-15 00:18:55)

Offline

 

#13  2013-10-15 10:49:48

  yossarian - Szczawiożerca

yossarian
Szczawiożerca
Skąd: Shangri-La
Zarejestrowany: 2011-04-25

Re: problem z wiatrakiem i acpi

Zdecyduj się czy to występowało również na Windowsie. Wtedy byłaby to jakaś wina sprzętu.

Bios pewnie da się zaktualizować za pomocą jakiejś narzędziowej płytki.

Miałeś sprawdzić tamte wpisy, najlepiej na wersji testowej i jakimś gotowym jądrze.

Offline

 

#14  2013-10-15 17:43:36

  Kovciu - Użytkownik

Kovciu
Użytkownik
Zarejestrowany: 2013-10-13

Re: problem z wiatrakiem i acpi

Ta, zrobie sobie wersje testową by zraz wywalic calego debiana i całą resztą bo jak zwykle testówka mi rozwali wszystko od początku do końca, albo zrobi tak ze ja sie nie ogarnę -> przez to było moje pytanie czy to tylko mi tak sie rozwala czy to normalne i trzeba pakiety kompletować potem.

Co do pracy na widowsie napisałem że "no właśnie z tego co pracowalem na windzie troszku to tego nie było" = pracowałem troszkę na windowsie to tego nie było, chodził cicho. On ma poprostu jakieś wiksy z tym wiatraczkiem, bo teraz czuje że ciepły a się nie załącza, a jest tak że jest chłodny a wiatrak dalej swoje.

pozdrawiam

Offline

 

#15  2013-10-15 19:43:15

  Andrzej66 - Użytkownik

Andrzej66
Użytkownik
Skąd: Elbląg
Zarejestrowany: 2009-08-26

Re: problem z wiatrakiem i acpi

W logach masz nieskonfigurowane /etc/default/cpufrequtils
Podaj jako root z konsoli

cpufreq-info

Mój z cpufrequtilis przedstawiam niżej.

ENABLE="true"
GOVERNOR="powersave"
MIN_SPEED=800.

Cyrki z temperaturami i obrotami wiatraka miałem z kernelem 3.11.1 i 3.11.2 na lapku asusa z prockiem intela driver: intel_pstate . Ostatnio coś poprawili i na poniższych jest o.k. nawet temp mam o 2 st. są niższe.

Linux asus-1505 3.11-3.dmz.1-liquorix-amd64 #1 ZEN SMP PREEMPT Tue Oct 15 03:26:12 UTC 2013 x86_64 GNU/Linux
Linux asus-1505 3.11-4.dmz.1-liquorix-amd64 #1 ZEN SMP PREEMPT Tue Oct 15 03:26:12 UTC 2013 x86_64 GNU/Linux

Pozdrawiam

Offline

 

#16  2013-10-15 20:31:00

  Kovciu - Użytkownik

Kovciu
Użytkownik
Zarejestrowany: 2013-10-13

Re: problem z wiatrakiem i acpi

Kod:

root@anon:/home/anon# cpufreq-info
cpufrequtils 008: cpufreq-info (C) Dominik Brodowski 2004-2009
Report errors and bugs to cpufreq@vger.kernel.org, please.
analyzing CPU 0:
  driver: intel_pstate
  CPUs which run at the same hardware frequency: 0
  CPUs which need to have their frequency coordinated by software: 0
  maximum transition latency: 0.97 ms.
  hardware limits: 800 MHz - 2.70 GHz
  available cpufreq governors: performance, powersave
  current policy: frequency should be within 800 MHz and 2.70 GHz.
                  The governor "powersave" may decide which speed to u
se
                  within this range.
  current CPU frequency is 2.38 GHz (asserted by call to hardware).
analyzing CPU 1:
  driver: intel_pstate
  CPUs which run at the same hardware frequency: 1
  CPUs which need to have their frequency coordinated by software: 1
  maximum transition latency: 0.97 ms.
  hardware limits: 800 MHz - 2.70 GHz
  available cpufreq governors: performance, powersave
  current policy: frequency should be within 800 MHz and 2.70 GHz.
                  The governor "powersave" may decide which speed to u
se
                  within this range.
  current CPU frequency is 2.43 GHz (asserted by call to hardware).
analyzing CPU 2:
  driver: intel_pstate
  CPUs which run at the same hardware frequency: 2
  CPUs which need to have their frequency coordinated by software: 2
  maximum transition latency: 0.97 ms.
  hardware limits: 800 MHz - 2.70 GHz
  available cpufreq governors: performance, powersave
  current policy: frequency should be within 800 MHz and 2.70 GHz.
                  The governor "powersave" may decide which speed to u
se
                  within this range.
  current CPU frequency is 2.63 GHz (asserted by call to hardware).
analyzing CPU 3:
  driver: intel_pstate
  CPUs which run at the same hardware frequency: 3
  CPUs which need to have their frequency coordinated by software: 3
  maximum transition latency: 0.97 ms.
  hardware limits: 800 MHz - 2.70 GHz
  available cpufreq governors: performance, powersave
  current policy: frequency should be within 800 MHz and 2.70 GHz.
                  The governor "powersave" may decide which speed to u
se
                  within this range.
  current CPU frequency is 2.12 GHz (asserted by call to hardware).

Co do info z cpufrequtilis, niestety nie widze tego, bo jak spojrzalem w /etc/cpufreqd.conf to zupelnie co innego, były tam podane profile działania.

Niestety teraz jak przejde na jajo stabilne w squezze to mi grafa wywali itp, niestety z góry jestem zmuszony mieć świeże, bo jak pisalem wcześniej, na starszym jajku ani grafy nie szło zainstalować, ani dotyk nie działał... masakra....

Nadal nie wiem jak to wykonac z przejsciem na jessie/sid

pozdrawiam

Offline

 

#17  2013-10-15 20:46:52

  Andrzej66 - Użytkownik

Andrzej66
Użytkownik
Skąd: Elbląg
Zarejestrowany: 2009-08-26

Re: problem z wiatrakiem i acpi

cpufrequtilis tworzysz jako root w ulubionym edytorze tekstowym i umieszczasz w /etc/default/
Wklejasz zawartość mojego configu do swojego - podanego we wcześniejszym poście i wykonujesz jako root żeby nie restartować kompa:

/etc/init.d/cpufrequtilis restart

P.S. Mocno masz obciążonego lapka, bo masz wysokie częstotliwości na rdzeniach i tym samym pewnie wiatrak głośno chodzi.

Ostatnio edytowany przez Andrzej66 (2013-10-15 20:50:29)

Offline

 

#18  2013-10-15 21:06:44

  Kovciu - Użytkownik

Kovciu
Użytkownik
Zarejestrowany: 2013-10-13

Re: problem z wiatrakiem i acpi

Takie info po restarcie, wszystko ok?

Kod:

root@anon:~# /etc/init.d/cpufrequtils restart
[....] CPUFreq Utilities: Setting ondemand CPUFreq governor...disabled[ ok ernor not available...done.

No tylko jak go odciążyć? mysle by jakos go zupgradowac przez dist-upgrade do jessie lub sid... ale sam nie wiem... jak to wykonac to mnie martwi... czy walnac upgrade a potem doinstalowac gnome itp?

pozdr

Offline

 

#19  2013-10-15 21:13:13

  yossarian - Szczawiożerca

yossarian
Szczawiożerca
Skąd: Shangri-La
Zarejestrowany: 2011-04-25

Re: problem z wiatrakiem i acpi

Miałeś zainstalować normalny kernel a nie swoje wynalazki.
ondemand już nie ma dla tego procesora.
Ludzie używają sida i nic się nie wywala, więc tym bardziej wersja testowa nie powinna.

Zrób porządek z systemem bo tak to nie ma prawa działać.
I podaj jakieś konkrety bo nikt nie będzie zgadywał o co chodzi z tym wywalanym Gnome.

Offline

 

#20  2013-10-15 21:25:16

  Kovciu - Użytkownik

Kovciu
Użytkownik
Zarejestrowany: 2013-10-13

Re: problem z wiatrakiem i acpi

Ok, to robie aktualizacje do testing, ale licze na Ciebie @yossarian ze pomozesz :D jak cos mi tam wyleci :)

pozdrawiam :)

Offline

 

#21  2013-10-15 21:30:39

  yossarian - Szczawiożerca

yossarian
Szczawiożerca
Skąd: Shangri-La
Zarejestrowany: 2011-04-25

Re: problem z wiatrakiem i acpi

Wystarczy czytać co system „mówi”.
Sam niczego nie wywala bez zgody użyszkodnika.

Offline

 

#22  2013-10-15 21:34:43

  Kovciu - Użytkownik

Kovciu
Użytkownik
Zarejestrowany: 2013-10-13

Re: problem z wiatrakiem i acpi

cos takiego narazie wypisał przed aktu, wszystko zaakceptowałem

Kod:

Następujące NOWE pakiety zostaną zainstalowane:
  aglfn{a} apache2-bin blender-data{a} cpp-4.8{a} cups-browsed{a} 
  cups-daemon{a} cups-server-common{a} dconf-cli{a} 
  dconf-editor{a} dh-python{a} diffstat{a} 
  eclipse-cdt-profiling-framework{a} ethtool{a} five-or-more{a} 
  fonts-dejavu{a} fonts-dejavu-core{a} fonts-dejavu-extra{a} 
  four-in-a-row{a} g++-4.8{a} gawk{a} gcc-4.8{a} gcc-4.8-base{a} 
  geoclue-nominatim{a} gfortran-4.8{a} gir1.2-clutter-gst-2.0{a} 
  gir1.2-gnomedesktop-3.0{a} gir1.2-gst-plugins-base-1.0{a} 
  gir1.2-gstreamer-1.0{a} gir1.2-rest-0.7{a} 
  gir1.2-tracker-0.16{a} gir1.2-zpj-0.0{a} gnome-calculator{a} 
  gnome-chess{a} gnome-klotski{a} gnome-mahjongg{a} 
  gnome-mines{a} gnome-nibbles{a} gnome-packagekit-session{a} 
  gnome-robots{a} gnome-tetravex{a} gnupg-agent{a} gnupg2{a} 
  gnustep-base-common{a} gnustep-base-runtime{a} 
  gnustep-common{a} grilo-plugins-0.2{a} gstreamer1.0-clutter{a} 
  gstreamer1.0-libav{a} gstreamer1.0-nice{a} 
  gstreamer1.0-plugins-bad{a} gstreamer1.0-plugins-base{a} 
  gstreamer1.0-plugins-good{a} gstreamer1.0-plugins-ugly{a} 
  gstreamer1.0-pulseaudio{a} gstreamer1.0-x{a} 
  gtk2-engines-pixbuf{a} hardening-includes{a} 
  icedtea-7-jre-jamvm{a} init-system-helpers{a} iproute2 
  javascript-common{a} libapt-pkg-perl{a} 
  libarchive-extract-perl{a} libarchive-zip-perl{a} 
  libarchive13{a} libasan0{a} libasound2-data{a} 
  libasprintf-dev{a} libassuan0{a} libatm1{a} libatomic1{a} 
  libaudit-common{a} libaudit1{a} libauthen-sasl-perl{a} 
  libautodie-perl{a} libavresample1{a} libavutil52{a} 
  libboost-chrono1.54.0{a} libboost-date-time1.49.0{a} 
  libboost-date-time1.54.0{a} libboost-filesystem1.54.0{a} 
  libboost-iostreams1.54.0{a} libboost-locale1.54.0{a} 
  libboost-program-options1.54.0{a} libboost-regex1.54.0{a} 
  libboost-system1.54.0{a} libboost-thread1.54.0{a} 
  libbrlapi0.6{a} libcamel-1.2-43{a} libcdr-0.0-0{a} 
  libcheese-gtk23{a} libcheese7{a} libclass-accessor-perl{a} 
  libclone-perl{a} libcloog-isl4{a} libcloog-ppl1{a} 
  libclucene-contribs1{a} libclucene-core1{a} 
  libclutter-gst-2.0-0{a} libcmis-0.3-3{a} libcogl-pango12{a} 
  libcogl12{a} libcolord-gtk1{a} libcolorhug1{a} 
  libcommons-io-java{a} libdconf1{a} libdigest-hmac-perl{a} 
  libdrm-nouveau2{a} libebackend-1.2-6{a} libebook-1.2-14{a} 
  libebook-contacts-1.2-0{a} libecal-1.2-15{a} 
  libedata-book-1.2-17{a} libedata-cal-1.2-20{a} 
  libedataserver-1.2-17{a} libee0{a} libelfg0{a} 
  libemail-valid-perl{a} libestr0{a} libexttextcat-2.0-0{a} 
  libfarstream-0.2-2{a} libffi6{a} libfftw3-double3{a} 
  libfftw3-single3{a} libfltk-gl1.3{a} libfltk1.3{a} 
  libfluidsynth1{a} libfontembed1{a} libgcc-4.7-dev{a} 
  libgcc-4.8-dev{a} libgcr-base-3-1{a} libgcr-ui-3-1{a} libgd3{a} 
  libgee-0.8-2{a} libgettextpo-dev{a} libgexiv2-2{a} 
  libgfortran-4.8-dev{a} libgjs0c{ab} libgmpxx4ldbl{a} 
  libgnome-bluetooth11{a} libgnomekbd8{a} libgnustep-base1.22{a} 
  libgnutls-openssl27{a} libgnutls28{a} libgraphite2-3{a} 
  libgrilo-0.2-1{a} libgstreamer-plugins-bad1.0-0{a} 
  libgstreamer-plugins-base1.0-0{a} libgstreamer1.0-0{a} 
  libgtkglext1{a} libgtksourceview-3.0-1{a} 
  libgupnp-dlna-2.0-3{a} libgweather-3-3{a} libharfbuzz-icu0{a} 
  libharfbuzz0a{a} libhogweed2{a} libhsqldb1.8.0-java{a} 
  libhtml-template-perl{a} libintl-perl{a} libio-html-perl{a} 
  libio-pty-perl{a} libio-socket-inet6-perl{a} 
  libio-string-perl{a} libipc-run-perl{a} 
  libipc-system-simple-perl{a} libisl10{a} libisorelax-java{a} 
  libjavaewah-java{a} libjemalloc1{a} libjs-jquery{a} 
  libjson-c2{a} libjson-glib-1.0-common{a} libjzlib-java{a} 
  libksba8{a} liblangtag-common{a} liblangtag1{a} 
  liblist-moreutils-perl{a} libllvm3.2{a} 
  liblog-message-simple-perl{a} liblognorm0{a} liblua5.2-0{a} 
  liblzo2-2{a} libmnl0{a} libmodule-pluggable-perl{a} libmpc3{a} 
  libmpg123-0{a} libmspub-0.0-0{a} libmsv-java{a} 
  libmwaw-0.1-1{a} libnet-dns-perl{a} libnet-domain-tld-perl{a} 
  libnet-ip-perl{a} libnet-smtp-ssl-perl{a} libobjc4{a} 
  libodfgen-0.0-0{a} libopencv-core2.4{a} libopencv-highgui2.4{a} 
  libopencv-imgproc2.4{a} libopenimageio1.2{a} liborcus-0.6-0{a} 
  libpackagekit-glib2-16{a} libpango-1.0-0{a} 
  libpangocairo-1.0-0{a} libpangoft2-1.0-0{a} libpangox-1.0-0 
  libpangoxft-1.0-0 libparse-debianchangelog-perl{a} 
  libperl4-corelibs-perl{a} libperl5.18{a} libperlio-gzip-perl{a} 
  libpod-latex-perl{a} libppl-c4{a} libppl12{a} libpulsedsp{a} 
  libpython-stdlib{a} libpython2.7-minimal{a} 
  libpython2.7-stdlib{a} libpython3-stdlib{a} libpython3.3{a} 
  libpython3.3-minimal{a} libpython3.3-stdlib{a} libqpdf13{a} 
  libraw9{a} librelaxng-datatype-java{a} librhythmbox-core8{a} 
  librygel-core-2.0-1{a} librygel-renderer-2.0-1{a} 
  librygel-renderer-gst-2.0-1{a} librygel-server-2.0-1{a} 
  libsecret-1-0{a} libsecret-common{a} libserf1{a} libsigsegv2{a} 
  libsnmp30{a} libsocket6-perl{a} libspice-server1{a} 
  libspnav0{a} libstdc++-4.8-dev{a} libsub-identify-perl{a} 
  libsub-name-perl{a} libtasn1-6{a} libtbb2{a} 
  libtelepathy-farstream3{a} libtelepathy-logger3{a} 
  libterm-ui-perl{a} libtevent0{a} libtext-levenshtein-perl{a} 
  libtext-soundex-perl{a} libtext-unidecode-perl{a} libtiff5{a} 
  libtracker-extract-0.16-0{a} libtracker-miner-0.16-0{a} 
  libtracker-sparql-0.16-0{a} libtsan0{a} libtxc-dxtn0{a} 
  libudev1{a} libudisks2-0{a} libwayland-client0{a} 
  libwayland-server0{a} libwebp4{a} libx264-133{a} libx264-138{a} 
  libxatracker1{a} libxml-libxml-perl{a} 
  libxml-namespacesupport-perl{a} libxml-sax-base-perl{a} 
  libxml-sax-expat-perl{a} libxml-sax-perl{a} 
  libxml-simple-perl{a} libxtables10{a} libytnef0{a} 
  libzapojit-0.0-0{a} libzeitgeist-1.0-1{a} lintian{a} 
  linux-image-3.10-3-amd64{a} openjdk-7-jdk{a} openjdk-7-jre{a} 
  openjdk-7-jre-headless{a} openjdk-7-jre-lib{a} p11-kit{a} 
  patchutils{a} pinentry-gtk2{a} python-lxml{a} python-six{a} 
  python3{a} python3-apt{a} python3-aptdaemon{a} 
  python3-aptdaemon.gtk3widgets{a} python3-dbus{a} 
  python3-defer{a} python3-gi{a} python3-minimal{a} 
  python3-packagekit{a} python3-pkg-resources{a} 
  python3-software-properties{a} python3-uno{ab} python3.3{a} 
  python3.3-minimal{a} qpdf{a} qtcore4-l10n{a} rfkill{a} 
  t1utils{a} tali{a} transfig{a} udisks2{a} unar{a} 
  xserver-xorg-video-modesetting{a} xserver-xorg-video-qxl{a} 
Następujące pakiety zostaną USUNIĘTE:
  apache2.2-bin{u} eclipse-rse{u} evolution-webcal{u} 
  fuse-utils{u} g++-4.7{u} gcalctool{u} geoclue-yahoo{u} 
  gfortran-4.7{u} gir1.2-clutter-gst-1.0{u} gir1.2-folks-0.6{u} 
  gir1.2-gee-1.0{u} gir1.2-gst-plugins-base-0.10{u} 
  gir1.2-tracker-0.14{u} git{u} git-man{u} glchess{u} glines{u} 
  gnect{u} gnibbles{u} gnobots2{u} gnome-games-data{u} 
  gnome-games-extra-data{u} gnomine{u} gnotravex{u} gnotski{u} 
  grilo-plugins-0.1{u} gtali{u} libarchive12{u} 
  libatk-adaptor-data{u} libaudit0{u} 
  libbackport-util-concurrent-java{u} 
  libboost-program-options1.49.0{u} libboost-thread1.49.0{u} 
  libbrlapi0.5{u} libcamel-1.2-33{u} libcheese-gtk21{u} 
  libcheese3{u} libclutter-gst-1.0-0{u} 
  libclutter-imcontext-0.1-0{u} libclutter-imcontext-0.1-bin{u} 
  libcluttergesture-0.0.2-0{u} libcmis-0.2-0{u} libcogl-pango0{u} 
  libcogl9{u} libcommons-net2-java{u} libcupsdriver1{u} 
  libdconf0{u} libdrm-nouveau1a{u} libebackend-1.2-2{u} 
  libebook-1.2-13{u} libecal-1.2-11{u} libedata-book-1.2-13{u} 
  libedata-cal-1.2-15{u} libedataserver-1.2-16{u} 
  libedataserverui-3.0-1{u} libelf1{u} libepc-1.0-3{u} 
  libepc-common{u} libepc-ui-1.0-3{u} liberror-perl{u} 
  libescpr1{u} libexttextcat0{u} libfltk1.1{u} libgd2-xpm{u} 
  libgexiv2-1{u} libgnome-bluetooth10{u} libgnomekbd7{u} 
  libgnujaf-java{u} libgraphite2-2.0.0{u} libgrilo-0.1-0{u} 
  libgtksourceview-3.0-0{u} libgupnp-dlna-1.0-2{u} 
  libgweather-3-0{u} libhsqldb-java{u} libibverbs1{u} 
  libjaxme-java{u} libjson0{u} libmpc2{u} libmx-1.0-2{u} 
  libmx-bin{u} libmx-common{u} libnuma1{u} libopenmpi1.3{u} 
  libopenraw1{u} libpackagekit-glib2-14{u} libparpack2{u} 
  libperl5.14{u} libpthread-stubs0{u} libpython3.2{u} libraw5{u} 
  libreoffice-emailmerge{u} libreoffice-filter-binfilter{u} 
  libreoffice-filter-mobiledev{u} librhythmbox-core6{u} 
  libslp1{u} libsnmp15{u} libstdc++6-4.7-dev{u} 
  libsystemd-daemon0{u} libtelepathy-farstream2{u} 
  libtelepathy-logger2{u} libtidy-0.99-0{u} libtorque2{u} 
  libtracker-extract-0.14-0{u} libtracker-miner-0.14-0{u} 
  libtracker-sparql-0.14-0{u} libvte-common{u} libvte9{u} 
  libwayland0{u} libwebp2{u} libx264-123{u} libx264-132{u} 
  mahjongg{u} python-aptdaemon{u} python-aptdaemon.gtk3widgets{u} 
  python-beautifulsoup{u} python-defer{u} python-feedparser{u} 
  python-gnupginterface{u} python-httplib2{u} python-libxml2{u} 
  python-packagekit{u} python-pkg-resources{u} python-pycurl{u} 
  python-software-properties{u} python-utidylib{u} python3.2{u} 
  python3.2-minimal{u} rsync{u} ttf-liberation{u} 
  ttf-sil-gentium-basic{u} 
Następujące pakiety zostaną zaktualizowane:
  accountsservice acl acpi-fakekey acpi-support acpi-support-base 
  acpid aisleriot alacarte alsa-base alsa-utils ant ant-optional 
  apt apt-utils apt-xapian-index aptdaemon aptdaemon-data 
  aptitude aptitude-common argyll at at-spi2-core autoconf 
  automake autopoint autotools-dev baobab base-files base-passwd 
  bash bc bind9-host binfmt-support binutils blender bluefish 
  bluefish-data bluefish-plugins bluetooth bluez bluez-alsa 
  bluez-cups bluez-gstreamer bogofilter bogofilter-bdb 
  bogofilter-common bootlogd brasero brasero-common 
  browser-plugin-gnash bsdmainutils bsdutils build-essential 
  busybox bzip2 ca-certificates ca-certificates-java caribou 
  caribou-antler cdbs cdrdao cheese cheese-common chromium 
  chromium-inspector colord console-setup console-setup-linux 
  consolekit coreutils cpio cpp cpp-4.7 cryptsetup-bin cups 
  cups-bsd cups-client cups-common cups-filters cups-pk-helper 
  cups-ppdc db5.1-util dbus dbus-x11 dc dconf-gsettings-backend 
  dconf-service dconf-tools debconf debconf-i18n debian-faq 
  debian-keyring debianutils default-jdk default-jre 
  default-jre-headless desktop-file-utils dictionaries-common 
  diffutils discover-data dmidecode dmsetup dnsmasq-base dnsutils 
  dosfstools e2fslibs e2fsprogs eclipse eclipse-anyedit 
  eclipse-cdt eclipse-cdt-autotools eclipse-cdt-jni 
  eclipse-cdt-pkg-config eclipse-cdt-valgrind eclipse-egit 
  eclipse-emf eclipse-jdt eclipse-mylyn 
  eclipse-mylyn-builds-hudson eclipse-mylyn-context-cdt 
  eclipse-mylyn-context-jdt eclipse-mylyn-context-pde 
  eclipse-mylyn-tasks-bugzilla eclipse-mylyn-tasks-trac 
  eclipse-mylyn-versions-cvs eclipse-mylyn-wikitext eclipse-pde 
  eclipse-platform eclipse-platform-data eclipse-rcp ekg2 
  ekg2-core ekg2-dbg ekg2-jabber ekg2-ui-ncurses empathy 
  empathy-common enchant eog espeak-data evince evince-common 
  evolution evolution-common evolution-data-server 
  evolution-data-server-common evolution-plugins exfat-fuse 
  exfat-utils exim4 exim4-base exim4-config exim4-daemon-light 
  extlinux fastjar file file-roller findutils folks-common 
  fontconfig fontconfig-config fonts-cantarell fonts-droid 
  fonts-lyx fonts-opensymbol foomatic-db-compressed-ppds 
  foomatic-db-engine fosfat fosfat-dev ftp fuse fusefat g++ gcc 
  gcc-4.7 gcc-4.7-base gconf-service gconf2 gconf2-common gcr gdb 
  gdbserver gdebi gdebi-core gdm3 gedit gedit-common 
  gedit-plugins geoclue geoclue-hostip geoclue-localnet 
  geoclue-manual geoip-database gettext gettext-base gfortran 
  ghostscript ghostscript-cups gimp gimp-data gimp-ufraw 
  gir1.2-accountsservice-1.0 gir1.2-atk-1.0 gir1.2-atspi-2.0 
  gir1.2-caribou-1.0 gir1.2-clutter-1.0 gir1.2-cogl-1.0 
  gir1.2-coglpango-1.0 gir1.2-evince-3.0 gir1.2-freedesktop 
  gir1.2-gck-1 gir1.2-gconf-2.0 gir1.2-gcr-3 gir1.2-gdata-0.0 
  gir1.2-gdkpixbuf-2.0 gir1.2-gkbd-3.0 gir1.2-glib-2.0 
  gir1.2-gmenu-3.0 gir1.2-gnomebluetooth-1.0 gir1.2-goa-1.0 
  gir1.2-gtk-3.0 gir1.2-gtkclutter-1.0 gir1.2-gtksource-3.0 
  gir1.2-gtop-2.0 gir1.2-gucharmap-2.90 
  gir1.2-javascriptcoregtk-3.0 gir1.2-json-1.0 gir1.2-mutter-3.0 
  gir1.2-networkmanager-1.0 gir1.2-panelapplet-4.0 
  gir1.2-pango-1.0 gir1.2-peas-1.0 gir1.2-rb-3.0 gir1.2-soup-2.4 
  gir1.2-telepathyglib-0.12 gir1.2-telepathylogger-0.2 
  gir1.2-totem-1.0 gir1.2-totem-plparser-1.0 
  gir1.2-upowerglib-1.0 gir1.2-vte-2.90 gir1.2-webkit-3.0 
  gir1.2-wnck-3.0 gjs gkbd-capplet glib-networking 
  glib-networking-common glib-networking-services gnash 
  gnash-common gnome gnome-accessibility-themes gnome-applets 
  gnome-applets-data gnome-backgrounds gnome-bluetooth 
  gnome-color-manager gnome-contacts gnome-control-center 
  gnome-control-center-data gnome-core gnome-desktop3-data 
  gnome-dictionary gnome-documents gnome-font-viewer gnome-games 
  gnome-icon-theme gnome-icon-theme-extras 
  gnome-icon-theme-symbolic gnome-keyring gnome-menus 
  gnome-nettool gnome-online-accounts gnome-packagekit 
  gnome-packagekit-data gnome-panel gnome-panel-data 
  gnome-power-manager gnome-screensaver gnome-screenshot 
  gnome-settings-daemon gnome-shell gnome-shell-common 
  gnome-sudoku gnome-sushi gnome-system-log gnome-system-monitor 
  gnome-terminal gnome-terminal-data gnome-themes-standard 
  gnome-themes-standard-data gnome-user-guide gnome-user-share 
  gnuchess gnupg gnuplot gnuplot-x11 google-chrome-stable gparted 
  gpgv grep groff groff-base gstreamer0.10-nice 
  gstreamer0.10-plugins-ugly gucharmap guile-2.0-libs gvfs 
  gvfs-backends gvfs-bin gvfs-common gvfs-daemons gvfs-libs gzip 
  hdparm hostname hpijs hplip hplip-data hwdata hyphen-en-us 
  iagno ifupdown imagemagick imagemagick-common info 
  initramfs-tools initscripts inkscape install-info 
  installation-report ipolish iproute iptables iputils-ping 
  iputils-tracepath irssi isc-dhcp-client isc-dhcp-common 
  iso-codes jarwrapper java-common junit4 kbd 
  keyboard-configuration krb5-locales less libaa1 libaacs0 
  libaccountsservice0 libacl1 libalgorithm-diff-perl 
  libalgorithm-diff-xs-perl libapache2-mod-dnssd libapr1 
  libaprutil1 libaprutil1-dbd-sqlite3 libaprutil1-ldap 
  libapt-inst1.5 libapt-pkg4.12 libarpack2 libasm3-java 
  libasound2 libasound2-plugins libasprintf0c2 libass4 
  libatasmart4 libatk-adaptor libatk-bridge2.0-0 
  libatk-wrapper-java libatk-wrapper-java-jni libatk1.0-0 
  libatk1.0-data libatkmm-1.6-1 libatlas3-base libatspi2.0-0 
  libattr1 libaudio2 libavcodec54 libavformat54 libaxis-java 
  libbind9-80 libblas-dev libblas3 libblas3gf libblkid1 
  libbluetooth3 libbluray1 libbonobo2-0 libbonobo2-common 
  libboost-iostreams1.49.0 libbrasero-media3-1 libbsd0 libburn4 
  libbz2-1.0 libbz2-dev libc-bin libc-dev-bin libc6 libc6-dbg 
  libc6-dev libcairo-gobject2 libcairo-perl libcairo2 
  libcanberra-gtk-module libcanberra-gtk0 libcanberra-gtk3-0 
  libcanberra-gtk3-module libcanberra-pulse libcanberra0 
  libcap-ng0 libcaribou-common libcaribou-gtk-module 
  libcaribou-gtk3-module libcaribou0 libcdaudio1 libcdparanoia0 
  libchamplain-0.12-0 libchamplain-gtk-0.12-0 libck-connector0 
  libclass-isa-perl libclutter-1.0-0 libclutter-1.0-common 
  libclutter-gtk-1.0-0 libcogl-common libcolord1 libcomerr2 
  libcommons-beanutils-java libcommons-codec-java 
  libcommons-collections3-java libcommons-compress-java 
  libcommons-digester-java libcommons-logging-java 
  libcommons-pool-java libcroco3 libcryptsetup4 libcups2 
  libcupscgi1 libcupsfilters1 libcupsimage2 libcupsmime1 
  libcupsppdc1 libcurl3 libcurl3-gnutls libdatrie1 libdb5.1 
  libdb5.1-java libdb5.1-java-jni libdbus-1-3 libdc1394-22 
  libdca0 libdevmapper-event1.02.1 libdevmapper1.02.1 libdiscid0 
  libdjvulibre-text libdjvulibre21 libdmapsharing-3.0-2 libdns88 
  libdom4j-java libdrm-intel1 libdrm-radeon1 libdrm2 libdvdnav4 
  libdvdread4 libeasymock-java libecj-java libedit2 libegl1-mesa 
  libegl1-mesa-drivers libenca0 libenchant1c2a 
  libequinox-osgi-java libespeak1 libevdocument3-4 libevent-2.0-5 
  libevolution libevview3-3 libexempi3 libexif12 libexpat1 
  libexttextcat-data libfdk-aac0 libfftw3-3 
  libfile-fcntllock-perl libfile-mimeinfo-perl libflac8 libflite1 
  libfolks-eds25 libfolks-telepathy25 libfolks25 libfontconfig1 
  libfontenc1 libfosfat0 libfosgra0 libfribidi0 libfs6 libfuse2 
  libgail-3-0 libgail-common libgail18 libgbm1 libgc1c2 libgcc1 
  libgck-1-0 libgconf-2-4 libgconf2-4 libgcr-3-1 libgcr-3-common 
  libgcrypt11 libgdata-common libgdata13 libgdbm3 libgdict-1.0-6 
  libgdict-common libgdk-pixbuf2.0-0 libgdk-pixbuf2.0-common 
  libgee2 libgegl-0.2-0 libgeoclue0 libgeocode-glib0 libgeoip1 
  libgeronimo-jta-1.1-spec-java libgettextpo0 libgfortran3 
  libgimp2.0 libgirepository-1.0-1 libgl1-mesa-dri 
  libgl1-mesa-glx libgl2ps0 libglapi-mesa libgles1-mesa 
  libgles2-mesa libglib-perl libglib2.0-0 libglib2.0-bin 
  libglib2.0-data libglibmm-2.4-1c2a libglu1-mesa libgmime-2.6-0 
  libgmime2.6-cil libgmp10 libgnome-desktop-3-2 libgnome-menu-3-0 
  libgnome2-0 libgnome2-common libgnomekbd-common libgnomevfs2-0 
  libgnomevfs2-common libgnomevfs2-extra libgnumail-java 
  libgnutls26 libgoa-1.0-0 libgoa-1.0-common libgomp1 
  libgoogle-gson-java libgpg-error0 libgpgme11 libgphoto2-2 
  libgphoto2-l10n libgphoto2-port0 libgpm2 libgraphicsmagick++3 
  libgraphicsmagick3 libgs9 libgs9-common libgsf-1-114 
  libgsf-1-common libgsl0ldbl libgssapi-krb5-2 libgssdp-1.0-3 
  libgtk-3-0 libgtk-3-bin libgtk-3-common libgtk-vnc-2.0-0 
  libgtk2-perl libgtk2.0-0 libgtk2.0-bin libgtk2.0-common 
  libgtkhtml-4.0-0 libgtkhtml-4.0-common libgtkhtml-editor-4.0-0 
  libgtkmm-2.4-1c2a libgtkmm-3.0-1 libgtksourceview-3.0-common 
  libgtop2-7 libgtop2-common libgucharmap-2-90-7 libgudev-1.0-0 
  libgupnp-1.0-4 libgupnp-av-1.0-2 libgupnp-igd-1.0-4 libgusb2 
  libgvnc-1.0-0 libgweather-common libgxps2 libhamcrest-java 
  libhdf5-7 libhpmud0 libhtml-parser-perl libhttp-message-perl 
  libhttpclient-java libhttpcore-java libhyphen0 libicc2 libicu48 
  libicu4j-java libidn11 libieee1284-3 libilmbase6 libimdi0 
  libio-socket-ip-perl libio-socket-ssl-perl libisc84 libisccc80 
  libisccfg82 libisofs6 libitm1 libjack-jackd2-0 libjasper1 
  libjavascriptcoregtk-1.0-0 libjavascriptcoregtk-3.0-0 
  libjaxen-java libjdom1-java libjetty8-java libjgit-java 
  libjsch-java libjson-glib-1.0-0 libjsoup-java libk5crypto3 
  libkeyutils1 libkpathsea6 libkrb5-3 libkrb5support0 
  liblapack-dev liblapack3 libldap-2.4-2 liblensfun-data 
  liblensfun0 liblocale-gettext-perl liblockfile-bin liblockfile1 
  liblog4j1.2-java liblouis-data liblouis2 libltdl7 liblua5.1-0 
  liblvm2app2.2 liblwp-protocol-https-perl liblwres80 libmad0 
  libmagic1 libmagick++5 libmagickcore5 libmagickcore5-extra 
  libmagickwand5 libmailtools-perl libmeanwhile1 
  libmetacity-private0a libmhash2 libmimic0 
  libmission-control-plugins0 libmodplug1 libmount1 
  libmozjs185-1.0 libmpeg2-4 libmpfr4 libmtdev1 libmtp-common 
  libmtp-runtime libmtp9 libmutter0 libnautilus-extension1a 
  libncurses5 libncurses5-dev libncursesw5 libneon27-gnutls 
  libnet-dbus-perl libnet-http-perl libnet-ssleay-perl 
  libnetfilter-conntrack3 libnettle4 libnewt0.52 libnfnetlink0 
  libnfsidmap2 libnice10 libnl-3-200 libnl-genl-3-200 
  libnl-route-3-200 libnm-glib-vpn1 libnm-glib4 libnm-gtk-common 
  libnm-gtk0 libnm-util2 libnotify4 libnspr4 libnss3 libnss3-1d 
  liboauth0 liboctave1 libogg0 libopenexr6 libopenobex1 
  libopenvg1-mesa libopus0 liborbit2 liborc-0.4-0 
  libosgi-core-java libp11-kit0 libpam-ck-connector 
  libpam-gnome-keyring libpam-modules libpam-modules-bin 
  libpam-runtime libpam0g libpanel-applet-4-0 libpango-perl 
  libpango1.0-0 libpangomm-1.4-1 libparted0debian1 libpcap0.8 
  libpci3 libpciaccess0 libpcre3 libpcre3-dev libpcrecpp0 
  libpcsclite1 libpeas-1.0-0 libpeas-common libpipeline1 
  libpixman-1-0 libplist1 libpng12-0 libpng12-dev 
  libpoppler-glib8 libpoppler19 libportaudio2 libpostproc52 
  libprocps0 libpst4 libpstoedit0c2a libpth20 
  libpthread-stubs0-dev libpulse-mainloop-glib0 libpulse0 
  libpurple-bin libpurple0 libpython2.7 libqt4-network 
  libqt4-opengl libqt4-xml libqtcore4 libqtdbus4 libqtgui4 
  libquadmath0 libquvi-scripts libraptor2-0 librasqal3 
  libraw1394-11 librdf0 libreadline5 libreoffice libreoffice-base 
  libreoffice-base-core libreoffice-calc libreoffice-common 
  libreoffice-core libreoffice-draw libreoffice-evolution 
  libreoffice-gnome libreoffice-gtk libreoffice-help-en-us 
  libreoffice-help-pl libreoffice-impress libreoffice-java-common 
  libreoffice-l10n-pl libreoffice-math 
  libreoffice-report-builder-bin libreoffice-style-galaxy 
  libreoffice-style-tango libreoffice-writer librome-java 
  librsvg2-2 librsvg2-common librtmp0 libsane libsane-common 
  libsane-extras libsane-extras-common libsane-hpaio libsasl2-2 
  libsasl2-modules libsdl-image1.2 libsdl-mixer1.2 libsdl-net1.2 
  libsdl1.2debian libseed-gtk3-0 libselinux1 libsemanage-common 
  libsemanage1 libsensors4 libsepol1 libservlet2.5-java 
  libservlet3.0-java libsgutils2-2 libshout3 libsmbclient 
  libsndfile1 libsnmp-base libsocialweb-client2 
  libsocialweb-common libsocialweb-service libsocialweb0 
  libsocket-perl libsoundtouch0 libsoup-gnome2.4-1 libsoup2.4-1 
  libspandsp2 libsqlite3-0 libss2 libssh2-1 libssl1.0.0 
  libstartup-notification0 libstdc++6 libsvn1 libswresample0 
  libswscale2 libswt-cairo-gtk-3-jni libswt-glx-gtk-3-jni 
  libswt-gnome-gtk-3-jni libswt-gtk-3-java libswt-gtk-3-jni 
  libswt-webkit-gtk-3-jni libsystemd-login0 libtalloc2 libtasn1-3 
  libtdb1 libtelepathy-glib0 libtext-charwidth-perl 
  libtext-iconv-perl libthai-data libthai0 libtie-ixhash-perl 
  libtiff4 libtinfo-dev libtinfo5 libtokyocabinet9 
  libtomcat7-java libtotem-plparser17 libtotem0 libunique-3.0-0 
  libupower-glib1 libusb-0.1-4 libusb-1.0-0 libuuid-perl libuuid1 
  libv4l-0 libv4lconvert0 libva1 libvisio-0.0-0 libvo-aacenc0 
  libvo-amrwbenc0 libvpx1 libvte-2.90-9 libvte-2.90-common 
  libwbclient0 libwebkitgtk-1.0-0 libwebkitgtk-1.0-common 
  libwebkitgtk-3.0-0 libwebkitgtk-3.0-common libwnck-3-0 
  libwnck-3-common libwpd-0.9-9 libwps-0.2-2 
  libws-commons-util-java libwsdl4j-java libwww-perl 
  libwxbase2.8-0 libwxgtk2.8-0 libx11-6 libx11-data libx11-dev 
  libx11-doc libx11-xcb1 libxalan2-java libxapian22 libxau-dev 
  libxau6 libxaw7 libxcb-dri2-0 libxcb-glx0 libxcb-render0 
  libxcb-shape0 libxcb-shm0 libxcb-xfixes0 libxcb1 libxcb1-dev 
  libxcomposite1 libxcursor1 libxdamage1 libxerces2-java libxext6 
  libxfixes3 libxfont1 libxi6 libxinerama1 libxml-parser-perl 
  libxml2 libxmlrpc3-client-java libxmlrpc3-common-java 
  libxom-java libxrandr2 libxrender1 libxres1 libxslt1.1 
  libxt-dev libxt6 libxtst6 libxv1 libxvmc1 libxxf86dga1 
  libxxf86vm1 libxz-java libyajl2 libyelp0 libzbar0 libzephyr4 
  libzvbi-common libzvbi0 lightsoff linux-image-amd64 
  linux-libc-dev linux-source-3.10 lm-sensors locales logrotate 
  lsb-base lsb-release m4 man-db manpages manpages-dev 
  manpages-pl manpages-pl-dev mc mc-data media-player-info 
  mercurial mercurial-common mesa-utils metacity metacity-common 
  mime-support mlocate mobile-broadband-provider-info mount 
  mousetweaks mscompress mtools multiarch-support mutt 
  mutter-common myspell-pl nautilus nautilus-data nautilus-sendto 
  nautilus-sendto-empathy ncurses-base ncurses-bin ncurses-term 
  net-tools netbase network-manager network-manager-gnome 
  nfs-common nmap ntfs-3g obexd-client octave octave-common 
  openprinting-ppds openssh-client openssl os-prober packagekit 
  packagekit-backend-aptcc packagekit-tools patch pciutils perl 
  perl-base perl-modules perlmagick pidgin-data pm-utils 
  poppler-data poppler-utils ppp printer-driver-c2esp 
  printer-driver-escpr printer-driver-foo2zjs 
  printer-driver-hpcups printer-driver-hpijs 
  printer-driver-m2300w printer-driver-postscript-hp 
  printer-driver-ptouch printer-driver-pxljr procps psmisc 
  pstoedit pulseaudio pulseaudio-module-x11 pulseaudio-utils 
  python python-apt python-apt-common python-brlapi python-dbus 
  python-dbus-dev python-debian python-gi python-gi-cairo 
  python-gobject python-gobject-2 python-louis python-mako 
  python-markupsafe python-minimal python-numpy python-pyatspi 
  python-pyatspi2 python-uno{b} python-wnck python-xapian 
  python-xdg python2.7 python2.7-minimal quadrapassel r-base 
  r-base-core r-base-dev r-base-html r-cran-boot r-cran-class 
  r-cran-cluster r-cran-codetools r-cran-foreign 
  r-cran-kernsmooth r-cran-lattice r-cran-mass r-cran-matrix 
  r-cran-mgcv r-cran-nlme r-cran-nnet r-cran-rpart r-cran-spatial 
  r-cran-survival r-doc-html r-recommended rhythmbox 
  rhythmbox-data rhythmbox-plugin-cdrecorder rhythmbox-plugins 
  rpcbind rsyslog rtkit rygel rygel-playbin rygel-preferences 
  rygel-tracker samba-common samba-common-bin sane-utils sat4j 
  seahorse sed sensible-utils sgml-data shotwell shotwell-common 
  smbclient software-properties-common software-properties-gtk 
  sound-theme-freedesktop ssl-cert sudo swell-foop synaptic 
  syslinux syslinux-common syslinux-themes-debian 
  syslinux-themes-debian-wheezy sysv-rc sysvinit sysvinit-utils 
  tar task-desktop task-gnome-desktop task-laptop task-polish 
  task-polish-desktop task-print-server tasksel tasksel-data 
  tcl8.5 telepathy-gabble telepathy-haze telepathy-idle 
  telepathy-logger telepathy-mission-control-5 telepathy-rakia 
  texinfo tk8.5 totem totem-common totem-plugins traceroute 
  tracker tracker-extract tracker-gui tracker-miner-fs 
  tracker-utils transmission-common transmission-gtk ttf-dejavu 
  ttf-dejavu-core ttf-dejavu-extra tzdata tzdata-java ucf udev 
  udisks ufraw ufraw-batch unattended-upgrades uno-libs3 unoconv 
  unrar unzip upower ure usb-modeswitch usb-modeswitch-data 
  usbutils util-linux util-linux-locales valgrind valgrind-dbg 
  vbetool vim vim-common vim-runtime vim-tiny vinagre vino w3m 
  wget whiptail whois wireless-regdb wpolish x11-apps x11-common 
  x11-utils x11-xserver-utils x11proto-core-dev 
  x11proto-input-dev xbitmaps xbrlapi xdg-user-dirs 
  xdg-user-dirs-gtk xdg-utils xfonts-terminus xorg xorg-docs-core 
  xorg-sgml-doctools xserver-common xserver-xephyr xserver-xorg 
  xserver-xorg-core xserver-xorg-input-all 
  xserver-xorg-input-evdev xserver-xorg-input-mouse 
  xserver-xorg-input-synaptics xserver-xorg-input-vmmouse 
  xserver-xorg-input-wacom xserver-xorg-video-all 
  xserver-xorg-video-ati xserver-xorg-video-cirrus 
  xserver-xorg-video-fbdev xserver-xorg-video-intel 
  xserver-xorg-video-mach64 xserver-xorg-video-mga 
  xserver-xorg-video-neomagic xserver-xorg-video-nouveau 
  xserver-xorg-video-openchrome xserver-xorg-video-r128 
  xserver-xorg-video-radeon xserver-xorg-video-savage 
  xserver-xorg-video-siliconmotion xserver-xorg-video-sisusb 
  xserver-xorg-video-tdfx xserver-xorg-video-trident 
  xserver-xorg-video-vesa xserver-xorg-video-vmware xterm 
  xul-ext-adblock-plus yelp yelp-xsl zenity zenity-common zip 
  zlib1g zlib1g-dev 
Następujące pakiety POLECANE przez inne NIE zostaną zainstalowane:
  aptitude-doc-cs aptitude-doc-en aptitude-doc-es aptitude-doc-fi 
  aptitude-doc-fr aptitude-doc-it aptitude-doc-ja gnupg-curl 
  gnupg-curl:i386 uuid-runtime uuid-runtime:i386 
1212 pakietów aktualizowanych, 308 instalowanych, 130 do usunięcia i 0 nieaktualizowanych.
Do pobrania 1527 MB archiwów. Zajęte po rozpakowaniu: 435 MB.
Następujące pakiety mają niespełnione zależności:
 xserver-xorg-video-apm : Wymaga: xorg-video-abi-12 który jest pakietem wirtualnym.
 xserver-xorg-video-ark : Wymaga: xorg-video-abi-12 który jest pakietem wirtualnym.
 xserver-xorg-video-s3virge : Wymaga: xorg-video-abi-12 który jest pakietem wirtualnym.
 xserver-xorg-video-chips : Wymaga: xorg-video-abi-12 który jest pakietem wirtualnym.
 xserver-xorg-video-sis : Wymaga: xorg-video-abi-12 który jest pakietem wirtualnym.
 python3-uno : W konflikcie z: python-uno ale zaplanowana jest instalacja wersji 1:4.1.1-1+b1.
 python-uno : W konflikcie z: python3-uno ale zaplanowana jest instalacja wersji 1:4.1.1-1+b1.
 xserver-xorg-video-s3 : Wymaga: xorg-video-abi-12 który jest pakietem wirtualnym.
 xserver-xorg-video-voodoo : Wymaga: xorg-video-abi-12 który jest pakietem wirtualnym.
 xserver-xorg-video-tseng : Wymaga: xorg-video-abi-12 który jest pakietem wirtualnym.
 libgjs0c : Narusza zależności: libgjs0b ale zainstalowana jest wersja 1.32.0-5.
 xserver-xorg-video-rendition : Wymaga: xorg-video-abi-12 który jest pakietem wirtualnym.
 xserver-xorg-video-i128 : Wymaga: xorg-video-abi-12 który jest pakietem wirtualnym.
Następujące działania rozwiążą problemy z zależnościami:

      Usunięcie następujących pakietów:                               
1)      eog                                                           
2)      gedit                                                         
3)      gedit-plugins                                                 
4)      gir1.2-peas-1.0                                               
5)      gir1.2-rb-3.0                                                 
6)      gir1.2-totem-1.0                                              
7)      gjs                                                           
8)      gnome                                                         
9)      gnome-core                                                    
10)     gnome-documents                                               
11)     gnome-session                                                 
12)     gnome-shell                                                   
13)     gnome-shell-extensions                                        
14)     gnome-sushi                                                   
15)     libpeas-1.0-0                                                 
16)     libtotem0                                                     
17)     rhythmbox                                                     
18)     rhythmbox-plugin-cdrecorder                                   
19)     rhythmbox-plugins                                             
20)     task-gnome-desktop                                            
21)     totem                                                         
22)     totem-plugins                                                 
23)     unoconv                                                       
24)     xserver-xorg-video-apm                                        
25)     xserver-xorg-video-ark                                        
26)     xserver-xorg-video-chips                                      
27)     xserver-xorg-video-i128                                       
28)     xserver-xorg-video-rendition                                  
29)     xserver-xorg-video-s3                                         
30)     xserver-xorg-video-s3virge                                    
31)     xserver-xorg-video-sis                                        
32)     xserver-xorg-video-tseng                                      
33)     xserver-xorg-video-voodoo                                     

      Zatrzymanie bieżących wersji następujących pakietów:            
34)     libgjs0c [niezainstalowany]                                   
35)     librhythmbox-core8 [niezainstalowany]                         
36)     python3-uno [niezainstalowany]                                

      Pozostawienie następujących problemów z zależnościami:          
37)     gedit-common poleca gedit                                     
38)     gnome-control-center poleca gnome-session                     
39)     gnome-panel poleca gnome-session (>= 2.26)                    
40)     nautilus poleca gnome-sushi                                   
41)     rhythmbox-data poleca rhythmbox                               
42)     task-desktop poleca task-gnome-desktop | task-kde-desktop | ta
43)     task-gnome-desktop poleca gnome   

Zaakceptować rozwiązanie? [Y/n/q/?] y
Następujące pakiety mają niespełnione zależności:
 libgtksourceview-3.0-0 : Wymaga: libgtksourceview-3.0-common (< 3.5) ale zaplanowana jest instalacja wersji 3.8.2-1.
 librhythmbox-core6 : Wymaga: libpeas-1.0-0 (>= 1.0.0) ale nie ma być instalowany.
Następujące działania rozwiążą problemy z zależnościami:

     Usunięcie następujących pakietów:                                
1)     libgtksourceview-3.0-0                                         
2)     librhythmbox-core6                                             

     Pozostawienie następujących problemów z zależnościami:           
3)     gedit-common poleca gedit                                      
4)     gnome-control-center poleca gnome-session                      
5)     gnome-panel poleca gnome-session (>= 2.26)                     
6)     nautilus poleca gnome-sushi                                    
7)     task-desktop poleca task-gnome-desktop | task-kde-desktop | tas

============

Następujące NOWE pakiety zostaną zainstalowane:
  aglfn{a} apache2-bin blender-data{a} cpp-4.8{a} cups-browsed{a} 
  cups-daemon{a} cups-server-common{a} dconf-cli{a} 
  dconf-editor{a} dh-python{a} diffstat{a} 
  eclipse-cdt-profiling-framework{a} ethtool{a} five-or-more{a} 
  fonts-dejavu{a} fonts-dejavu-core{a} fonts-dejavu-extra{a} 
  four-in-a-row{a} g++-4.8{a} gawk{a} gcc-4.8{a} gcc-4.8-base{a} 
  geoclue-nominatim{a} gfortran-4.8{a} gnome-chess{a} 
  gnome-klotski{a} gnome-mahjongg{a} gnome-mines{a} 
  gnome-nibbles{a} gnome-packagekit-session{a} gnome-robots{a} 
  gnome-tetravex{a} gnupg-agent{a} gnupg2{a} 
  gnustep-base-common{a} gnustep-base-runtime{a} 
  gnustep-common{a} gstreamer1.0-libav{a} gstreamer1.0-nice{a} 
  gstreamer1.0-plugins-bad{a} gstreamer1.0-plugins-base{a} 
  gstreamer1.0-plugins-good{a} gstreamer1.0-plugins-ugly{a} 
  gstreamer1.0-pulseaudio{a} gstreamer1.0-x{a} 
  gtk2-engines-pixbuf{a} hardening-includes{a} 
  icedtea-7-jre-jamvm{a} init-system-helpers{a} iproute2 
  javascript-common{a} libapt-pkg-perl{a} 
  libarchive-extract-perl{a} libarchive-zip-perl{a} 
  libarchive13{a} libasan0{a} libasound2-data{a} 
  libasprintf-dev{a} libassuan0{a} libatm1{a} libatomic1{a} 
  libaudit-common{a} libaudit1{a} libauthen-sasl-perl{a} 
  libautodie-perl{a} libavresample1{a} libavutil52{a} 
  libboost-chrono1.54.0{a} libboost-date-time1.49.0{a} 
  libboost-date-time1.54.0{a} libboost-filesystem1.54.0{a} 
  libboost-iostreams1.54.0{a} libboost-locale1.54.0{a} 
  libboost-program-options1.54.0{a} libboost-regex1.54.0{a} 
  libboost-system1.54.0{a} libboost-thread1.54.0{a} 
  libbrlapi0.6{a} libcamel-1.2-43{a} libcdr-0.0-0{a} 
  libcheese-gtk23{a} libcheese7{a} libclass-accessor-perl{a} 
  libclone-perl{a} libcloog-isl4{a} libcloog-ppl1{a} 
  libclucene-contribs1{a} libclucene-core1{a} 
  libclutter-gst-2.0-0{a} libcmis-0.3-3{a} libcogl-pango12{a} 
  libcogl12{a} libcolord-gtk1{a} libcolorhug1{a} 
  libcommons-io-java{a} libdconf1{a} libdigest-hmac-perl{a} 
  libdrm-nouveau2{a} libebackend-1.2-6{a} libebook-1.2-14{a} 
  libebook-contacts-1.2-0{a} libecal-1.2-15{a} 
  libedata-book-1.2-17{a} libedata-cal-1.2-20{a} 
  libedataserver-1.2-17{a} libee0{a} libelfg0{a} 
  libemail-valid-perl{a} libestr0{a} libexttextcat-2.0-0{a} 
  libfarstream-0.2-2{a} libffi6{a} libfftw3-double3{a} 
  libfftw3-single3{a} libfltk-gl1.3{a} libfltk1.3{a} 
  libfluidsynth1{a} libfontembed1{a} libgcc-4.7-dev{a} 
  libgcc-4.8-dev{a} libgcr-base-3-1{a} libgcr-ui-3-1{a} libgd3{a} 
  libgee-0.8-2{a} libgettextpo-dev{a} libgexiv2-2{a} 
  libgfortran-4.8-dev{a} libgmpxx4ldbl{a} libgnome-bluetooth11{a} 
  libgnomekbd8{a} libgnustep-base1.22{a} libgnutls-openssl27{a} 
  libgnutls28{a} libgraphite2-3{a} 
  libgstreamer-plugins-bad1.0-0{a} 
  libgstreamer-plugins-base1.0-0{a} libgstreamer1.0-0{a} 
  libgtkglext1{a} libgtksourceview-3.0-1{a} 
  libgupnp-dlna-2.0-3{a} libgweather-3-3{a} libharfbuzz-icu0{a} 
  libharfbuzz0a{a} libhogweed2{a} libhsqldb1.8.0-java{a} 
  libhtml-template-perl{a} libintl-perl{a} libio-html-perl{a} 
  libio-pty-perl{a} libio-socket-inet6-perl{a} 
  libio-string-perl{a} libipc-run-perl{a} 
  libipc-system-simple-perl{a} libisl10{a} libisorelax-java{a} 
  libjavaewah-java{a} libjemalloc1{a} libjs-jquery{a} 
  libjson-c2{a} libjson-glib-1.0-common{a} libjzlib-java{a} 
  libksba8{a} liblangtag-common{a} liblangtag1{a} 
  liblist-moreutils-perl{a} libllvm3.2{a} 
  liblog-message-simple-perl{a} liblognorm0{a} liblua5.2-0{a} 
  liblzo2-2{a} libmnl0{a} libmodule-pluggable-perl{a} libmpc3{a} 
  libmpg123-0{a} libmspub-0.0-0{a} libmsv-java{a} 
  libmwaw-0.1-1{a} libnet-dns-perl{a} libnet-domain-tld-perl{a} 
  libnet-ip-perl{a} libnet-smtp-ssl-perl{a} libobjc4{a} 
  libodfgen-0.0-0{a} libopencv-core2.4{a} libopencv-highgui2.4{a} 
  libopencv-imgproc2.4{a} libopenimageio1.2{a} liborcus-0.6-0{a} 
  libpackagekit-glib2-16{a} libpango-1.0-0{a} 
  libpangocairo-1.0-0{a} libpangoft2-1.0-0{a} libpangox-1.0-0 
  libpangoxft-1.0-0 libparse-debianchangelog-perl{a} 
  libperl4-corelibs-perl{a} libperl5.18{a} libperlio-gzip-perl{a} 
  libpod-latex-perl{a} libppl-c4{a} libppl12{a} libpulsedsp{a} 
  libpython-stdlib{a} libpython2.7-minimal{a} 
  libpython2.7-stdlib{a} libpython3-stdlib{a} libpython3.3{a} 
  libpython3.3-minimal{a} libpython3.3-stdlib{a} libqpdf13{a} 
  libraw9{a} librelaxng-datatype-java{a} librygel-core-2.0-1{a} 
  librygel-renderer-2.0-1{a} librygel-renderer-gst-2.0-1{a} 
  librygel-server-2.0-1{a} libsecret-1-0{a} libsecret-common{a} 
  libserf1{a} libsigsegv2{a} libsnmp30{a} libsocket6-perl{a} 
  libspice-server1{a} libspnav0{a} libstdc++-4.8-dev{a} 
  libsub-identify-perl{a} libsub-name-perl{a} libtasn1-6{a} 
  libtbb2{a} libtelepathy-farstream3{a} libtelepathy-logger3{a} 
  libterm-ui-perl{a} libtevent0{a} libtext-levenshtein-perl{a} 
  libtext-soundex-perl{a} libtext-unidecode-perl{a} libtiff5{a} 
  libtracker-extract-0.16-0{a} libtracker-miner-0.16-0{a} 
  libtracker-sparql-0.16-0{a} libtsan0{a} libtxc-dxtn0{a} 
  libudev1{a} libudisks2-0{a} libwayland-client0{a} 
  libwayland-server0{a} libwebp4{a} libx264-133{a} libx264-138{a} 
  libxatracker1{a} libxml-libxml-perl{a} 
  libxml-namespacesupport-perl{a} libxml-sax-base-perl{a} 
  libxml-sax-expat-perl{a} libxml-sax-perl{a} 
  libxml-simple-perl{a} libxtables10{a} libytnef0{a} 
  libzeitgeist-1.0-1{a} lintian{a} linux-image-3.10-3-amd64{a} 
  openjdk-7-jdk{a} openjdk-7-jre{a} openjdk-7-jre-headless{a} 
  openjdk-7-jre-lib{a} p11-kit{a} patchutils{a} pinentry-gtk2{a} 
  python-lxml{a} python-six{a} python3{a} python3-apt{a} 
  python3-aptdaemon{a} python3-aptdaemon.gtk3widgets{a} 
  python3-dbus{a} python3-defer{a} python3-gi{a} 
  python3-minimal{a} python3-packagekit{a} 
  python3-pkg-resources{a} python3-software-properties{a} 
  python3.3{a} python3.3-minimal{a} qpdf{a} qtcore4-l10n{a} 
  rfkill{a} t1utils{a} tali{a} transfig{a} udisks2{a} unar{a} 
  xserver-xorg-video-modesetting{a} xserver-xorg-video-qxl{a} 
Następujące pakiety zostaną USUNIĘTE:
  apache2.2-bin{u} eclipse-rse{u} eog{a} evolution-webcal{u} 
  fuse-utils{u} g++-4.7{u} gedit{a} gedit-plugins{a} 
  geoclue-yahoo{u} gfortran-4.7{u} gir1.2-clutter-gst-1.0{u} 
  gir1.2-peas-1.0{a} gir1.2-rb-3.0{a} gir1.2-totem-1.0{a} git{u} 
  git-man{u} gjs{a} glchess{u} glines{u} gnect{u} gnibbles{u} 
  gnobots2{u} gnome{a} gnome-core{a} gnome-documents{a} 
  gnome-games-extra-data{u} gnome-session{a} gnome-shell{a} 
  gnome-shell-extensions{a} gnome-sushi{a} gnomine{u} 
  gnotravex{u} gnotski{u} gtali{u} libarchive12{u} 
  libatk-adaptor-data{u} libaudit0{u} 
  libbackport-util-concurrent-java{u} 
  libboost-program-options1.49.0{u} libboost-thread1.49.0{u} 
  libbrlapi0.5{u} libcheese-gtk21{u} libcheese3{u} 
  libclutter-gst-1.0-0{u} libclutter-imcontext-0.1-0{u} 
  libclutter-imcontext-0.1-bin{u} libcluttergesture-0.0.2-0{u} 
  libcmis-0.2-0{u} libcogl-pango0{u} libcogl9{u} 
  libcommons-net2-java{u} libcupsdriver1{u} libdconf0{u} 
  libdrm-nouveau1a{u} libebackend-1.2-2{u} libebook-1.2-13{u} 
  libedata-book-1.2-13{u} libedata-cal-1.2-15{u} 
  libedataserverui-3.0-1{u} libelf1{u} liberror-perl{u} 
  libescpr1{u} libexttextcat0{u} libfltk1.1{u} libgd2-xpm{u} 
  libgexiv2-1{u} libgnome-bluetooth10{u} libgnomekbd7{u} 
  libgnujaf-java{u} libgraphite2-2.0.0{u} 
  libgtksourceview-3.0-0{a} libgupnp-dlna-1.0-2{u} 
  libgweather-3-0{u} libhsqldb-java{u} libibverbs1{u} 
  libjaxme-java{u} libjson0{u} libmpc2{u} libmx-1.0-2{u} 
  libmx-bin{u} libnuma1{u} libopenmpi1.3{u} libopenraw1{u} 
  libpackagekit-glib2-14{u} libparpack2{u} libpeas-1.0-0{a} 
  libperl5.14{u} libpthread-stubs0{u} libpython3.2{u} libraw5{u} 
  libreoffice-emailmerge{u} libreoffice-filter-binfilter{u} 
  libreoffice-filter-mobiledev{u} librhythmbox-core6{a} 
  libslp1{u} libsnmp15{u} libstdc++6-4.7-dev{u} 
  libsystemd-daemon0{u} libtelepathy-farstream2{u} libtorque2{u} 
  libtotem0{a} libvte-common{u} libvte9{u} libwayland0{u} 
  libwebp2{u} libx264-123{u} libx264-132{u} mahjongg{u} 
  python-aptdaemon{u} python-aptdaemon.gtk3widgets{u} 
  python-defer{u} python-gnupginterface{u} python-packagekit{u} 
  python-pkg-resources{u} python-pycurl{u} 
  python-software-properties{u} python3.2{u} python3.2-minimal{u} 
  rhythmbox{a} rhythmbox-plugin-cdrecorder{a} 
  rhythmbox-plugins{a} rsync{u} task-gnome-desktop{a} totem{a} 
  totem-plugins{a} ttf-liberation{u} ttf-sil-gentium-basic{u} 
  unoconv{a} xserver-xorg-video-apm{a} xserver-xorg-video-ark{a} 
  xserver-xorg-video-chips{a} xserver-xorg-video-i128{a} 
  xserver-xorg-video-rendition{a} xserver-xorg-video-s3{a} 
  xserver-xorg-video-s3virge{a} xserver-xorg-video-sis{a} 
  xserver-xorg-video-tseng{a} xserver-xorg-video-voodoo{a} 
Następujące pakiety zostaną zaktualizowane:
  accountsservice acl acpi-fakekey acpi-support acpi-support-base 
  acpid aisleriot alacarte alsa-base alsa-utils ant ant-optional 
  apt apt-utils apt-xapian-index aptdaemon aptdaemon-data 
  aptitude aptitude-common argyll at at-spi2-core autoconf 
  automake autopoint autotools-dev baobab base-files base-passwd 
  bash bc bind9-host binfmt-support binutils blender bluefish 
  bluefish-data bluefish-plugins bluetooth bluez bluez-alsa 
  bluez-cups bluez-gstreamer bogofilter bogofilter-bdb 
  bogofilter-common bootlogd brasero brasero-common 
  browser-plugin-gnash bsdmainutils bsdutils build-essential 
  busybox bzip2 ca-certificates ca-certificates-java caribou 
  caribou-antler cdbs cdrdao cheese cheese-common chromium 
  chromium-inspector colord console-setup console-setup-linux 
  consolekit coreutils cpio cpp cpp-4.7 cryptsetup-bin cups 
  cups-bsd cups-client cups-common cups-filters cups-pk-helper 
  cups-ppdc db5.1-util dbus dbus-x11 dc dconf-gsettings-backend 
  dconf-service dconf-tools debconf debconf-i18n debian-faq 
  debian-keyring debianutils default-jdk default-jre 
  default-jre-headless desktop-file-utils dictionaries-common 
  diffutils discover-data dmidecode dmsetup dnsmasq-base dnsutils 
  dosfstools e2fslibs e2fsprogs eclipse eclipse-anyedit 
  eclipse-cdt eclipse-cdt-autotools eclipse-cdt-jni 
  eclipse-cdt-pkg-config eclipse-cdt-valgrind eclipse-egit 
  eclipse-emf eclipse-jdt eclipse-mylyn 
  eclipse-mylyn-builds-hudson eclipse-mylyn-context-cdt 
  eclipse-mylyn-context-jdt eclipse-mylyn-context-pde 
  eclipse-mylyn-tasks-bugzilla eclipse-mylyn-tasks-trac 
  eclipse-mylyn-versions-cvs eclipse-mylyn-wikitext eclipse-pde 
  eclipse-platform eclipse-platform-data eclipse-rcp ekg2 
  ekg2-core ekg2-dbg ekg2-jabber ekg2-ui-ncurses empathy 
  empathy-common enchant espeak-data evince evince-common 
  evolution evolution-common evolution-data-server 
  evolution-data-server-common evolution-plugins exfat-fuse 
  exfat-utils exim4 exim4-base exim4-config exim4-daemon-light 
  extlinux fastjar file file-roller findutils folks-common 
  fontconfig fontconfig-config fonts-cantarell fonts-droid 
  fonts-lyx fonts-opensymbol foomatic-db-compressed-ppds 
  foomatic-db-engine fosfat fosfat-dev ftp fuse fusefat g++ gcc 
  gcc-4.7 gcc-4.7-base gconf-service gconf2 gconf2-common gcr gdb 
  gdbserver gdebi gdebi-core gdm3 gedit-common geoclue 
  geoclue-hostip geoclue-localnet geoclue-manual geoip-database 
  gettext gettext-base gfortran ghostscript ghostscript-cups gimp 
  gimp-data gimp-ufraw gir1.2-accountsservice-1.0 gir1.2-atk-1.0 
  gir1.2-atspi-2.0 gir1.2-caribou-1.0 gir1.2-clutter-1.0 
  gir1.2-cogl-1.0 gir1.2-coglpango-1.0 gir1.2-evince-3.0 
  gir1.2-freedesktop gir1.2-gck-1 gir1.2-gconf-2.0 gir1.2-gcr-3 
  gir1.2-gdata-0.0 gir1.2-gdkpixbuf-2.0 gir1.2-gkbd-3.0 
  gir1.2-glib-2.0 gir1.2-gmenu-3.0 gir1.2-gnomebluetooth-1.0 
  gir1.2-goa-1.0 gir1.2-gtk-3.0 gir1.2-gtkclutter-1.0 
  gir1.2-gtksource-3.0 gir1.2-gtop-2.0 gir1.2-gucharmap-2.90 
  gir1.2-javascriptcoregtk-3.0 gir1.2-json-1.0 gir1.2-mutter-3.0 
  gir1.2-networkmanager-1.0 gir1.2-panelapplet-4.0 
  gir1.2-pango-1.0 gir1.2-soup-2.4 gir1.2-telepathyglib-0.12 
  gir1.2-telepathylogger-0.2 gir1.2-totem-plparser-1.0 
  gir1.2-upowerglib-1.0 gir1.2-vte-2.90 gir1.2-webkit-3.0 
  gir1.2-wnck-3.0 gkbd-capplet glib-networking 
  glib-networking-common glib-networking-services gnash 
  gnash-common gnome-accessibility-themes gnome-applets 
  gnome-applets-data gnome-backgrounds gnome-bluetooth 
  gnome-color-manager gnome-contacts gnome-control-center 
  gnome-control-center-data gnome-desktop3-data gnome-dictionary 
  gnome-font-viewer gnome-games gnome-icon-theme 
  gnome-icon-theme-extras gnome-icon-theme-symbolic gnome-keyring 
  gnome-menus gnome-nettool gnome-online-accounts 
  gnome-packagekit gnome-packagekit-data gnome-panel 
  gnome-panel-data gnome-power-manager gnome-screensaver 
  gnome-screenshot gnome-settings-daemon gnome-shell-common 
  gnome-sudoku gnome-system-log gnome-system-monitor 
  gnome-terminal gnome-terminal-data gnome-themes-standard 
  gnome-themes-standard-data gnome-user-guide gnome-user-share 
  gnuchess gnupg gnuplot gnuplot-x11 google-chrome-stable gparted 
  gpgv grep groff groff-base gstreamer0.10-nice 
  gstreamer0.10-plugins-ugly gucharmap guile-2.0-libs gvfs 
  gvfs-backends gvfs-bin gvfs-common gvfs-daemons gvfs-libs gzip 
  hdparm hostname hpijs hplip hplip-data hwdata hyphen-en-us 
  iagno ifupdown imagemagick imagemagick-common info 
  initramfs-tools initscripts inkscape install-info 
  installation-report ipolish iproute iptables iputils-ping 
  iputils-tracepath irssi isc-dhcp-client isc-dhcp-common 
  iso-codes jarwrapper java-common junit4 kbd 
  keyboard-configuration krb5-locales less libaa1 libaacs0 
  libaccountsservice0 libacl1 libalgorithm-diff-perl 
  libalgorithm-diff-xs-perl libapache2-mod-dnssd libapr1 
  libaprutil1 libaprutil1-dbd-sqlite3 libaprutil1-ldap 
  libapt-inst1.5 libapt-pkg4.12 libarpack2 libasm3-java 
  libasound2 libasound2-plugins libasprintf0c2 libass4 
  libatasmart4 libatk-adaptor libatk-bridge2.0-0 
  libatk-wrapper-java libatk-wrapper-java-jni libatk1.0-0 
  libatk1.0-data libatkmm-1.6-1 libatlas3-base libatspi2.0-0 
  libattr1 libaudio2 libavcodec54 libavformat54 libaxis-java 
  libbind9-80 libblas-dev libblas3 libblas3gf libblkid1 
  libbluetooth3 libbluray1 libbonobo2-0 libbonobo2-common 
  libboost-iostreams1.49.0 libbrasero-media3-1 libbsd0 libburn4 
  libbz2-1.0 libbz2-dev libc-bin libc-dev-bin libc6 libc6-dbg 
  libc6-dev libcairo-gobject2 libcairo-perl libcairo2 
  libcanberra-gtk-module libcanberra-gtk0 libcanberra-gtk3-0 
  libcanberra-gtk3-module libcanberra-pulse libcanberra0 
  libcap-ng0 libcaribou-common libcaribou-gtk-module 
  libcaribou-gtk3-module libcaribou0 libcdaudio1 libcdparanoia0 
  libchamplain-0.12-0 libchamplain-gtk-0.12-0 libck-connector0 
  libclass-isa-perl libclutter-1.0-0 libclutter-1.0-common 
  libclutter-gtk-1.0-0 libcogl-common libcolord1 libcomerr2 
  libcommons-beanutils-java libcommons-codec-java 
  libcommons-collections3-java libcommons-compress-java 
  libcommons-digester-java libcommons-logging-java 
  libcommons-pool-java libcroco3 libcryptsetup4 libcups2 
  libcupscgi1 libcupsfilters1 libcupsimage2 libcupsmime1 
  libcupsppdc1 libcurl3 libcurl3-gnutls libdatrie1 libdb5.1 
  libdb5.1-java libdb5.1-java-jni libdbus-1-3 libdc1394-22 
  libdca0 libdevmapper-event1.02.1 libdevmapper1.02.1 libdiscid0 
  libdjvulibre-text libdjvulibre21 libdmapsharing-3.0-2 libdns88 
  libdom4j-java libdrm-intel1 libdrm-radeon1 libdrm2 libdvdnav4 
  libdvdread4 libeasymock-java libecj-java libedit2 libegl1-mesa 
  libegl1-mesa-drivers libenca0 libenchant1c2a 
  libequinox-osgi-java libespeak1 libevdocument3-4 libevent-2.0-5 
  libevolution libevview3-3 libexempi3 libexif12 libexpat1 
  libexttextcat-data libfdk-aac0 libfftw3-3 
  libfile-fcntllock-perl libfile-mimeinfo-perl libflac8 libflite1 
  libfolks-eds25 libfolks-telepathy25 libfolks25 libfontconfig1 
  libfontenc1 libfosfat0 libfosgra0 libfribidi0 libfs6 libfuse2 
  libgail-3-0 libgail-common libgail18 libgbm1 libgc1c2 libgcc1 
  libgck-1-0 libgconf-2-4 libgconf2-4 libgcr-3-1 libgcr-3-common 
  libgcrypt11 libgdata-common libgdata13 libgdbm3 libgdict-1.0-6 
  libgdict-common libgdk-pixbuf2.0-0 libgdk-pixbuf2.0-common 
  libgee2 libgegl-0.2-0 libgeoclue0 libgeocode-glib0 libgeoip1 
  libgeronimo-jta-1.1-spec-java libgettextpo0 libgfortran3 
  libgimp2.0 libgirepository-1.0-1 libgl1-mesa-dri 
  libgl1-mesa-glx libgl2ps0 libglapi-mesa libgles1-mesa 
  libgles2-mesa libglib-perl libglib2.0-0 libglib2.0-bin 
  libglib2.0-data libglibmm-2.4-1c2a libglu1-mesa libgmime-2.6-0 
  libgmime2.6-cil libgmp10 libgnome-desktop-3-2 libgnome-menu-3-0 
  libgnome2-0 libgnome2-common libgnomekbd-common libgnomevfs2-0 
  libgnomevfs2-common libgnomevfs2-extra libgnumail-java 
  libgnutls26 libgoa-1.0-0 libgoa-1.0-common libgomp1 
  libgoogle-gson-java libgpg-error0 libgpgme11 libgphoto2-2 
  libgphoto2-l10n libgphoto2-port0 libgpm2 libgraphicsmagick++3 
  libgraphicsmagick3 libgs9 libgs9-common libgsf-1-114 
  libgsf-1-common libgsl0ldbl libgssapi-krb5-2 libgssdp-1.0-3 
  libgtk-3-0 libgtk-3-bin libgtk-3-common libgtk-vnc-2.0-0 
  libgtk2-perl libgtk2.0-0 libgtk2.0-bin libgtk2.0-common 
  libgtkhtml-4.0-0 libgtkhtml-4.0-common libgtkhtml-editor-4.0-0 
  libgtkmm-2.4-1c2a libgtkmm-3.0-1 libgtksourceview-3.0-common 
  libgtop2-7 libgtop2-common libgucharmap-2-90-7 libgudev-1.0-0 
  libgupnp-1.0-4 libgupnp-av-1.0-2 libgupnp-igd-1.0-4 libgusb2 
  libgvnc-1.0-0 libgweather-common libgxps2 libhamcrest-java 
  libhdf5-7 libhpmud0 libhtml-parser-perl libhttp-message-perl 
  libhttpclient-java libhttpcore-java libhyphen0 libicc2 libicu48 
  libicu4j-java libidn11 libieee1284-3 libilmbase6 libimdi0 
  libio-socket-ip-perl libio-socket-ssl-perl libisc84 libisccc80 
  libisccfg82 libisofs6 libitm1 libjack-jackd2-0 libjasper1 
  libjavascriptcoregtk-1.0-0 libjavascriptcoregtk-3.0-0 
  libjaxen-java libjdom1-java libjetty8-java libjgit-java 
  libjsch-java libjson-glib-1.0-0 libjsoup-java libk5crypto3 
  libkeyutils1 libkpathsea6 libkrb5-3 libkrb5support0 
  liblapack-dev liblapack3 libldap-2.4-2 liblensfun-data 
  liblensfun0 liblocale-gettext-perl liblockfile-bin liblockfile1 
  liblog4j1.2-java liblouis-data liblouis2 libltdl7 liblua5.1-0 
  liblvm2app2.2 liblwp-protocol-https-perl liblwres80 libmad0 
  libmagic1 libmagick++5 libmagickcore5 libmagickcore5-extra 
  libmagickwand5 libmailtools-perl libmeanwhile1 
  libmetacity-private0a libmhash2 libmimic0 
  libmission-control-plugins0 libmodplug1 libmount1 
  libmozjs185-1.0 libmpeg2-4 libmpfr4 libmtdev1 libmtp-common 
  libmtp-runtime libmtp9 libmutter0 libnautilus-extension1a 
  libncurses5 libncurses5-dev libncursesw5 libneon27-gnutls 
  libnet-dbus-perl libnet-http-perl libnet-ssleay-perl 
  libnetfilter-conntrack3 libnettle4 libnewt0.52 libnfnetlink0 
  libnfsidmap2 libnice10 libnl-3-200 libnl-genl-3-200 
  libnl-route-3-200 libnm-glib-vpn1 libnm-glib4 libnm-gtk-common 
  libnm-gtk0 libnm-util2 libnotify4 libnspr4 libnss3 libnss3-1d 
  liboauth0 liboctave1 libogg0 libopenexr6 libopenobex1 
  libopenvg1-mesa libopus0 liborbit2 liborc-0.4-0 
  libosgi-core-java libp11-kit0 libpam-ck-connector 
  libpam-gnome-keyring libpam-modules libpam-modules-bin 
  libpam-runtime libpam0g libpanel-applet-4-0 libpango-perl 
  libpango1.0-0 libpangomm-1.4-1 libparted0debian1 libpcap0.8 
  libpci3 libpciaccess0 libpcre3 libpcre3-dev libpcrecpp0 
  libpcsclite1 libpeas-common libpipeline1 libpixman-1-0 
  libplist1 libpng12-0 libpng12-dev libpoppler-glib8 libpoppler19 
  libportaudio2 libpostproc52 libprocps0 libpst4 libpstoedit0c2a 
  libpth20 libpthread-stubs0-dev libpulse-mainloop-glib0 
  libpulse0 libpurple-bin libpurple0 libpython2.7 libqt4-network 
  libqt4-opengl libqt4-xml libqtcore4 libqtdbus4 libqtgui4 
  libquadmath0 libquvi-scripts libraptor2-0 librasqal3 
  libraw1394-11 librdf0 libreadline5 libreoffice libreoffice-base 
  libreoffice-base-core libreoffice-calc libreoffice-common 
  libreoffice-core libreoffice-draw libreoffice-evolution 
  libreoffice-gnome libreoffice-gtk libreoffice-help-en-us 
  libreoffice-help-pl libreoffice-impress libreoffice-java-common 
  libreoffice-l10n-pl libreoffice-math 
  libreoffice-report-builder-bin libreoffice-style-galaxy 
  libreoffice-style-tango libreoffice-writer librome-java 
  librsvg2-2 librsvg2-common librtmp0 libsane libsane-common 
  libsane-extras libsane-extras-common libsane-hpaio libsasl2-2 
  libsasl2-modules libsdl-image1.2 libsdl-mixer1.2 libsdl-net1.2 
  libsdl1.2debian libseed-gtk3-0 libselinux1 libsemanage-common 
  libsemanage1 libsensors4 libsepol1 libservlet2.5-java 
  libservlet3.0-java libsgutils2-2 libshout3 libsmbclient 
  libsndfile1 libsnmp-base libsocialweb-client2 
  libsocialweb-common libsocialweb-service libsocialweb0 
  libsocket-perl libsoundtouch0 libsoup-gnome2.4-1 libsoup2.4-1 
  libspandsp2 libsqlite3-0 libss2 libssh2-1 libssl1.0.0 
  libstartup-notification0 libstdc++6 libsvn1 libswresample0 
  libswscale2 libswt-cairo-gtk-3-jni libswt-glx-gtk-3-jni 
  libswt-gnome-gtk-3-jni libswt-gtk-3-java libswt-gtk-3-jni 
  libswt-webkit-gtk-3-jni libsystemd-login0 libtalloc2 libtasn1-3 
  libtdb1 libtelepathy-glib0 libtext-charwidth-perl 
  libtext-iconv-perl libthai-data libthai0 libtie-ixhash-perl 
  libtiff4 libtinfo-dev libtinfo5 libtokyocabinet9 
  libtomcat7-java libtotem-plparser17 libunique-3.0-0 
  libupower-glib1 libusb-0.1-4 libusb-1.0-0 libuuid-perl libuuid1 
  libv4l-0 libv4lconvert0 libva1 libvisio-0.0-0 libvo-aacenc0 
  libvo-amrwbenc0 libvpx1 libvte-2.90-9 libvte-2.90-common 
  libwbclient0 libwebkitgtk-1.0-0 libwebkitgtk-1.0-common 
  libwebkitgtk-3.0-0 libwebkitgtk-3.0-common libwnck-3-0 
  libwnck-3-common libwpd-0.9-9 libwps-0.2-2 
  libws-commons-util-java libwsdl4j-java libwww-perl 
  libwxbase2.8-0 libwxgtk2.8-0 libx11-6 libx11-data libx11-dev 
  libx11-doc libx11-xcb1 libxalan2-java libxapian22 libxau-dev 
  libxau6 libxaw7 libxcb-dri2-0 libxcb-glx0 libxcb-render0 
  libxcb-shape0 libxcb-shm0 libxcb-xfixes0 libxcb1 libxcb1-dev 
  libxcomposite1 libxcursor1 libxdamage1 libxerces2-java libxext6 
  libxfixes3 libxfont1 libxi6 libxinerama1 libxml-parser-perl 
  libxml2 libxmlrpc3-client-java libxmlrpc3-common-java 
  libxom-java libxrandr2 libxrender1 libxres1 libxslt1.1 
  libxt-dev libxt6 libxtst6 libxv1 libxvmc1 libxxf86dga1 
  libxxf86vm1 libxz-java libyajl2 libyelp0 libzbar0 libzephyr4 
  libzvbi-common libzvbi0 lightsoff linux-image-amd64 
  linux-libc-dev linux-source-3.10 lm-sensors locales logrotate 
  lsb-base lsb-release m4 man-db manpages manpages-dev 
  manpages-pl manpages-pl-dev mc mc-data media-player-info 
  mercurial mercurial-common mesa-utils metacity metacity-common 
  mime-support mlocate mobile-broadband-provider-info mount 
  mousetweaks mscompress mtools multiarch-support mutt 
  mutter-common myspell-pl nautilus nautilus-data nautilus-sendto 
  nautilus-sendto-empathy ncurses-base ncurses-bin ncurses-term 
  net-tools netbase network-manager network-manager-gnome 
  nfs-common nmap ntfs-3g obexd-client octave octave-common 
  openprinting-ppds openssh-client openssl os-prober packagekit 
  packagekit-backend-aptcc packagekit-tools patch pciutils perl 
  perl-base perl-modules perlmagick pidgin-data pm-utils 
  poppler-data poppler-utils ppp printer-driver-c2esp 
  printer-driver-escpr printer-driver-foo2zjs 
  printer-driver-hpcups printer-driver-hpijs 
  printer-driver-m2300w printer-driver-postscript-hp 
  printer-driver-ptouch printer-driver-pxljr procps psmisc 
  pstoedit pulseaudio pulseaudio-module-x11 pulseaudio-utils 
  python python-apt python-apt-common python-brlapi python-dbus 
  python-dbus-dev python-debian python-gi python-gi-cairo 
  python-gobject python-gobject-2 python-louis python-mako 
  python-markupsafe python-minimal python-numpy python-pyatspi 
  python-pyatspi2 python-uno python-wnck python-xapian python-xdg 
  python2.7 python2.7-minimal quadrapassel r-base r-base-core 
  r-base-dev r-base-html r-cran-boot r-cran-class r-cran-cluster 
  r-cran-codetools r-cran-foreign r-cran-kernsmooth 
  r-cran-lattice r-cran-mass r-cran-matrix r-cran-mgcv 
  r-cran-nlme r-cran-nnet r-cran-rpart r-cran-spatial 
  r-cran-survival r-doc-html r-recommended rpcbind rsyslog rtkit 
  rygel rygel-playbin rygel-preferences rygel-tracker 
  samba-common samba-common-bin sane-utils sat4j seahorse sed 
  sensible-utils sgml-data shotwell shotwell-common smbclient 
  software-properties-common software-properties-gtk 
  sound-theme-freedesktop ssl-cert sudo swell-foop synaptic 
  syslinux syslinux-common syslinux-themes-debian 
  syslinux-themes-debian-wheezy sysv-rc sysvinit sysvinit-utils 
  tar task-desktop task-laptop task-polish task-polish-desktop 
  task-print-server tasksel tasksel-data tcl8.5 telepathy-gabble 
  telepathy-haze telepathy-idle telepathy-logger 
  telepathy-mission-control-5 telepathy-rakia texinfo tk8.5 
  traceroute tracker tracker-extract tracker-gui tracker-miner-fs 
  tracker-utils transmission-common transmission-gtk ttf-dejavu 
  ttf-dejavu-core ttf-dejavu-extra tzdata tzdata-java ucf udev 
  udisks ufraw ufraw-batch unattended-upgrades uno-libs3 unrar 
  unzip upower ure usb-modeswitch usb-modeswitch-data usbutils 
  util-linux util-linux-locales valgrind valgrind-dbg vbetool vim 
  vim-common vim-runtime vim-tiny vinagre vino w3m wget whiptail 
  whois wireless-regdb wpolish x11-apps x11-common x11-utils 
  x11-xserver-utils x11proto-core-dev x11proto-input-dev xbitmaps 
  xbrlapi xdg-user-dirs xdg-user-dirs-gtk xdg-utils 
  xfonts-terminus xorg xorg-docs-core xorg-sgml-doctools 
  xserver-common xserver-xephyr xserver-xorg xserver-xorg-core 
  xserver-xorg-input-all xserver-xorg-input-evdev 
  xserver-xorg-input-mouse xserver-xorg-input-synaptics 
  xserver-xorg-input-vmmouse xserver-xorg-input-wacom 
  xserver-xorg-video-all xserver-xorg-video-ati 
  xserver-xorg-video-cirrus xserver-xorg-video-fbdev 
  xserver-xorg-video-intel xserver-xorg-video-mach64 
  xserver-xorg-video-mga xserver-xorg-video-neomagic 
  xserver-xorg-video-nouveau xserver-xorg-video-openchrome 
  xserver-xorg-video-r128 xserver-xorg-video-radeon 
  xserver-xorg-video-savage xserver-xorg-video-siliconmotion 
  xserver-xorg-video-sisusb xserver-xorg-video-tdfx 
  xserver-xorg-video-trident xserver-xorg-video-vesa 
  xserver-xorg-video-vmware xterm xul-ext-adblock-plus yelp 
  yelp-xsl zenity zenity-common zip zlib1g zlib1g-dev 
Następujące pakiety POLECANE przez inne NIE zostaną zainstalowane:
  aptitude-doc-cs aptitude-doc-en aptitude-doc-es aptitude-doc-fi 
  aptitude-doc-fr aptitude-doc-it aptitude-doc-ja gnupg-curl 
  gnupg-curl:i386 task-kde-desktop task-lxde-desktop 
  task-xfce-desktop uuid-runtime uuid-runtime:i386 
1189 pakietów aktualizowanych, 293 instalowanych, 138 do usunięcia i 9 nieaktualizowanych.
Do pobrania 1508 MB archiwów. Zajęte po rozpakowaniu: 420 MB.
Kontynuować? [Y/n/?]

Offline

 

#23  2013-10-15 21:39:41

  yossarian - Szczawiożerca

yossarian
Szczawiożerca
Skąd: Shangri-La
Zarejestrowany: 2011-04-25

Re: problem z wiatrakiem i acpi

Skoro sam akceptujesz takie wywalanie, to do kogo chcesz mieć pretensje?
Zrób porządek z repozytoriami, nieoficjalnymi pakietami, zamkniętymi sterownikami i dopiero na końcu bierz się za aktualizację.

Offline

 

#24  2013-10-15 21:52:35

  Kovciu - Użytkownik

Kovciu
Użytkownik
Zarejestrowany: 2013-10-13

Re: problem z wiatrakiem i acpi

Potem z ręki sam zainstaluje resztę... trudno, bywa... co do repo, mam tylko i wyłącznie z dug.net.pl ....




EDIT:

jak narazie lapek sie nie uruchamia :D

Ostatnio edytowany przez Kovciu (2013-10-17 16:03:28)

Offline

 

#25  2013-10-17 16:03:41

  Kovciu - Użytkownik

Kovciu
Użytkownik
Zarejestrowany: 2013-10-13

Re: problem z wiatrakiem i acpi

Kod:

uname -a

Kod:

Linux anon 3.10-3-amd64 #1 SMP Debian 3.10.11-1 (2013-09-10) x86_64 GNU/Linux

Kod:

sources.list

Kod:

## podstawowe repozytorium
deb http://ftp.pl.debian.org/debian/ testing main contrib non-free

## uaktualnienia bezpieczeństwa
deb http://security.debian.org/ testing/updates main contrib non-free

## deb-multimedia - dodatkowe kodeki, odtwarzacze, etc.
deb http://www.deb-multimedia.org/ testing main non-free 
deb-src http://www.deb-multimedia.org/ testing main non-free

## przeglądarka Google Chrome
deb http://dl.google.com/linux/chrome/deb/ stable main

Kod:

cat /proc/cmdline

Kod:

 BOOT_IMAGE=/boot/vmlinuz-3.10-3-amd64 root=UUID=1eb2c665-3988-4da1-84f3-60cc3974153c ro quiet

Kod:

sensors

Kod:

anon@anon:~$ sensors
coretemp-isa-0000
Adapter: ISA adapter
Physical id 0:  +54.0°C  (high = +87.0°C, crit = +105.0°C)
Core 0:         +46.0°C  (high = +87.0°C, crit = +105.0°C)
Core 1:         +47.0°C  (high = +87.0°C, crit = +105.0°C)

radeon-pci-0100
Adapter: PCI adapter
temp1:        +42.0°C

Wiatraczek już nie dobija :) ładnie chodzi, dziękuje @yossarian, lecz pojawił się problem z instalacją fglrx, gdyż nie widze możliwości instalacji takich pakietów, jak dam

Kod:

aptitude search fglrx

to dostaję

Kod:

c   glx-alternative-fglrx       - allows the selection of FGLRX as GLX

A teraz to niestety nie chodzi mi na radeonie tylko zintegrowanej od intela... a jest to dziwne... moze idzie to jakoś przełączyć albo cos? Instalowalem pakiet firmware-linux-nonfree - nie pomogło, oraz wyżej wspomniany glx-alternative-fglrx i też nie pomogło.

ps. mały aspekt -> bateria mimo posiadanych 48% pokazuje że wytrzyma jeszcze 103godziny :) // chciał bym ale to nie prawdziwe :D

pozdrawiam

Offline

 

Stopka forum

Powered by PunBB
© Copyright 2002–2005 Rickard Andersson
Możesz wyłączyć AdBlock — tu nie ma reklam ;-)