Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!

Ogłoszenie

Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.

#1526  2013-04-15 23:31:22

  yossarian - Szczawiożerca

yossarian
Szczawiożerca
Skąd: Shangri-La
Zarejestrowany: 2011-04-25

Re: Zrzutki

BlackEvo napisał(-a):

dhg:

Fajny theme na MOC. Można kopię? ;>


Pozdrawiam

Może ncmpcpp?
http://ncmpcpp.rybczak.net/screenshots.php

Offline

 

#1527  2013-04-18 16:47:33

  dhg - Amiga User

dhg
Amiga User
Skąd: podlasie / bielsk-podlaski
Zarejestrowany: 2010-09-24

Re: Zrzutki

BlackEvo napisał(-a):

dhg:

Fajny theme na MOC. Można kopię? ;>


Pozdrawiam

Theme jest standardowy, zainstalował sie razem z moc

Kod:

mocp -T green_theme

gdyby jednak go nie było...

Kod:

# green theme by Jacek Lehmann
# best viewed on shaded or black terminal

background        = default    default
frame            = black        default
window_title        = green        default
directory        = red         default
selected_directory    = yellow    default
playlist        = blue        default
selected_playlist    = magenta    default
file            = green        default
selected_file        = cyan        default 
marked_file        = green        default    bold
marked_selected_file    = cyan        default    bold
info            = cyan        default    
status            = magenta    default
title            = green        default
state            = magenta    default
current_time        = magenta    default
time_left        = cyan        default
total_time        = cyan        default
time_total_frames    = magenta    default
sound_parameters    = cyan        default
legend            = magenta    default
disabled        = black        default
enabled            = yellow    default
empty_mixer_bar        = green        default
filled_mixer_bar    = black        green
empty_time_bar        = green        default
filled_time_bar        = black        green
entry            = yellow    default
entry_title        = red        default
error            = red        default
message            = yellow    default
plist_time        = magenta    default

Ostatnio edytowany przez dhg (2013-04-18 16:52:42)


Tylko amigowiec potrafi generować fractale w czasie rzeczywistym używając do obliczeń wyłącznie żołądka

http://th06.deviantart.net/fs8/200H/i/2005/353/1/a/Fluxbox_User___User_Bar_by_The_pGo.jpg

Offline

 

#1528  2013-04-20 23:38:35

  morfik - Cenzor wirtualnego świata

morfik
Cenzor wirtualnego świata
Skąd: ze WSI
Zarejestrowany: 2011-09-15
Serwis

Re: Zrzutki

W końcu odświeżyłem sobie forecasta na pulpicie, co ja bym dał żeby mieć większy pulpit :)

http://img707.imageshack.us/img707/1540/95436895.png

Offline

 

#1529  2013-04-20 23:53:51

  Pavlo950 - człowiek pasjonat :D

Pavlo950
człowiek pasjonat :D
Zarejestrowany: 2012-02-20
Serwis

Re: Zrzutki

@up
Jak można mieć tak nawalone na pulpicie?

Offline

 

#1530  2013-04-21 00:03:17

  dominbik - Członek DUG

dominbik
Członek DUG
Zarejestrowany: 2011-07-25

Re: Zrzutki

oj tam. ja jeszcze do nie dawna używałem 1024x768 i nie narzekałem ;p   KISS && Minimalism i będzie dobrze ;)
Styl fajny, aczkolwiek jak dla mnie za dużo zbędnego info - ale co kto lubi. Ważne żeby właścicielowi się podobało ;D


http://img34.imageshack.us/img34/5092/zw9m.png http://img29.imageshack.us/img29/219/pibw.png

Offline

 

#1531  2013-04-21 00:43:04

  morfik - Cenzor wirtualnego świata

morfik
Cenzor wirtualnego świata
Skąd: ze WSI
Zarejestrowany: 2011-09-15
Serwis

Re: Zrzutki

Lubię spojrzeć na pulpit i mieć całe info, którego potrzebuję. Prawdopodobnie będę potrzebował drugiego pulpitu na konsolę, bo to okienko się robi coraz to i mniejsze.

Mi się tam wszystko spodoba -- kiedyś miałem tak http://img512.imageshack.us/img512/7489/88889224.jpg -- xD

Offline

 

#1532  2013-04-21 10:17:40

  dominbik - Członek DUG

dominbik
Członek DUG
Zarejestrowany: 2011-07-25

Re: Zrzutki

no nie mów, że potrzebujesz tego całego info. łącznie z Cloud cov, UV index?


http://img34.imageshack.us/img34/5092/zw9m.png http://img29.imageshack.us/img29/219/pibw.png

Offline

 

#1533  2013-04-21 12:01:22

  morfik - Cenzor wirtualnego świata

morfik
Cenzor wirtualnego świata
Skąd: ze WSI
Zarejestrowany: 2011-09-15
Serwis

Re: Zrzutki

Sam jeden parametr ci nic nie powie, ale jeżeli pozbierasz wszystkie i popatrzysz z perspektywy paru godzin (oryginalnie było 16) to wiesz, czego się spodziewać. Tak samo jak z punktem rosy może się ktoś przyczepić ale ja tam wiem kiedy będą mgły i znając teren mogę nawet określić w których miejscach. To wymaga trochę praktyki ale generalnie, patrząc na te tabelkę, wiem co mnie czeka na przestrzeni 8h. 16h nie robiłem, bo by się nie zmieściło. xD Śnieg też w lecie nie potrzebny, chciałem na początku to wyłączyć, ale wtedy by mi się okna rozsynchronizowały. Tam wszystko jest wyliczone co do 1px, choć jest jedna kreska, którą muszę poprawić, bo mnie denerwuje, że nie jest równo ale to jak będę miał chwilę czasu. xD

Offline

 

#1534  2013-05-03 21:48:59

  qba1707 - Użytkownik

qba1707
Użytkownik
Zarejestrowany: 2011-08-16

Re: Zrzutki

mój flux :-)
http://wnko.pl/thumbs/flux.png

Offline

 

#1535  2013-05-03 23:19:26

  P@blo - Nadworny matematyk

P@blo
Nadworny matematyk
Skąd: Wrocław v Jasło
Zarejestrowany: 2010-11-11

Re: Zrzutki

a to mój dwm:
http://wnko.pl/thumbs/2013050323.png
:) bo długiej uciążliwej walce ;D


ThinkPadX220i
| Procesor: Intel(R) Core(TM) i3-2310M CPU @ 2.10GHz |
|  Debian: sid   |   Arch: amd64   |   Sound: alsa   |
| No DE | WM: DWM  |  DM: .bash_profile  |  BIOS+MBR |

Offline

 

#1536  2013-05-04 11:31:12

  dowoszek - Użytkownik

dowoszek
Użytkownik
Zarejestrowany: 2009-04-14

Re: Zrzutki

Morfik, jak w conky ustawiasz te zielono-żółto-pomarańczowe paski z podziałką?

Offline

 

#1537  2013-05-04 13:05:20

  pink - Użytkownik

pink
Użytkownik
Skąd: P17PY93
Zarejestrowany: 2005-09-16

Re: Zrzutki

file-manager i dwm profanacja!!!!  jak juz to tylko mc!


T430 think-box 4.9-custom x86_64 Intel(R) Core(TM) i5-3230M CPU @ 2.60GHz GenuineIntel GNU/Linux
"Doktor plama i maharadża są pod złotym leszczem." "Człowieka od zwierzęcia odróżnia ciekawość świata. Patrze słucham i wyciągam wnioski."
https://www.behance.net/przemyslawmamon

Offline

 

#1538  2013-05-04 13:32:20

  P@blo - Nadworny matematyk

P@blo
Nadworny matematyk
Skąd: Wrocław v Jasło
Zarejestrowany: 2010-11-11

Re: Zrzutki

pink napisał(-a):

file-manager i dwm profanacja!!!!  jak juz to tylko mc!

Tak myślałem, że ktoś się tego czepi... ;) Niestety jestem młodziak i nie rozumiem epoki norton commandera, więc pozostaje cp,mv (z czego za zwyczaj korzystam), jednak do przeglądania choćby zdjęć dobrze mieć takiego thunara. ;)


ThinkPadX220i
| Procesor: Intel(R) Core(TM) i3-2310M CPU @ 2.10GHz |
|  Debian: sid   |   Arch: amd64   |   Sound: alsa   |
| No DE | WM: DWM  |  DM: .bash_profile  |  BIOS+MBR |

Offline

 

#1539  2013-05-04 13:39:23

  mati75 - Psuj

mati75
Psuj
Skąd: masz ten towar?
Zarejestrowany: 2010-03-14

Re: Zrzutki

mc jest wygodniejsze od połowy menadżerów plików.


https://l0calh0st.pl/obrazki/userbar.png

Offline

 

#1540  2013-05-04 14:34:12

  morfik - Cenzor wirtualnego świata

morfik
Cenzor wirtualnego świata
Skąd: ze WSI
Zarejestrowany: 2011-09-15
Serwis

Re: Zrzutki

@dowoszek -- skrypt lua to robi. Tak wygląda przykładowy skrypt:

Kod:

--[[
BARGRAPH WIDGET
v2.1 by wlourf (07 Jan. 2011)
this widget draws a bargraph with different effects 
http://u-scripts.blogspot.com/2010/07/bargraph-widget.html
    
To call the script in a conky, use, before TEXT
    lua_load /path/to/the/script/bargraph.lua
    lua_draw_hook_pre main_rings
and add one line (blank or not) after TEXT
    
Parameters are :
3 parameters are mandatory
name - the name of the conky variable to display, for example for {$cpu cpu0}, just write name="cpu"
arg  - the argument of the above variable, for example for {$cpu cpu0}, just write arg="cpu0"
       arg can be a numerical value if name=""
max  - the maximum value the above variable can reach, for example, for {$cpu cpu0}, just write max=100
    
Optional parameters:
x,y      - coordinates of the starting point of the bar, default = middle of the conky window
cap      - end of cap line, ossibles values are r,b,s (for round, butt, square), default="b"
        http://www.cairographics.org/samples/set_line_cap/
angle      - angle of rotation of the bar in degress, default = 0 (i.e. a vertical bar)
        set to 90 for an horizontal bar
skew_x      - skew bar around x axis, default = 0
skew_y      - skew bar around y axis, default = 0
blocks    - number of blocks to display for a bar (values >0) , default= 10
height      - height of a block, default=10 pixels
width      - width of a block, default=20 pixels
space      - space between 2 blocks, default=2 pixels
angle_bar - this angle is used to draw a bar on a circular way (ok, this is no more a bar !) default=0
radius      - for cicular bars, internal radius, default=0
        with radius, parameter width has no more effect.

Colours below are defined into braces {colour in hexadecimal, alpha}
fg_colour    - colour of a block ON, default= {0x00FF00,1}
bg_colour    - colour of a block OFF, default = {0x00FF00,0.5}
alarm         - threshold, values after this threshold will use alarm_colour colour , default=max
alarm_colour - colour of a block greater than alarm, default=fg_colour
smooth         - (true or false), create a gradient from fg_colour to bg_colour, default=false 
mid_colour   - colours to add to gradient, with this syntax {position into the gradient (0 to1), colour hexa, alpha}
           for example, this table {{0.25,0xff0000,1},{0.5,0x00ff00,1},{0.75,0x0000ff,1}} will add
           3 colours to gradient created by fg_colour and alarm_colour, default=no mid_colour
led_effect   - add LED effects to each block, default=no led_effect
           if smooth=true, led_effect is not used
           possibles values : "r","a","e" for radial, parallel, perdendicular to the bar (just try!)
           led_effect has to be used with theses colours :
fg_led         - middle colour of a block ON, default = fg_colour
bg_led         - middle colour of a block OFF, default = bg_colour
alarm_led    - middle colour of a block > ALARM,  default = alarm_colour

reflection parameters, not available for circular bars
reflection_alpha  - add a reflection effect (values from 0 to 1) default = 0 = no reflection
            other values = starting opacity
reflection_scale  - scale of the reflection (default = 1 = height of text)
reflection_length - length of reflection, define where the opacity will be set to zero
            values from 0 to 1, default =1
reflection      - position of reflection, relative to a vertical bar, default="b"
            possibles values are : "b","t","l","r" for bottom, top, left, right
draw_me           - if set to false, text is not drawn (default = true or 1)
            it can be used with a conky string, if the string returns 1, the text is drawn :
            example : "${if_empty ${wireless_essid wlan0}}${else}1$endif",

v1.0 (10 Feb. 2010) original release
v1.1 (13 Feb. 2010) numeric values can be passed instead conky stats with parameters name="", arg = numeric_value    
v1.2 (28 Feb. 2010) just renamed the widget to bargraph
v1.3 (03 Mar. 2010) added parameters radius & angle_bar to draw the bar in a circular way
v2.0 (12 Jul. 2010) rewrite script + add reflection effects and parameters are now set into tables
v2.1 (07 Jan. 2011) Add draw_me parameter and correct memory leaks, thanks to "Creamy Goodness"

--      This program is free software; you can redistribute it and/or modify
--      it under the terms of the GNU General Public License as published by
--      the Free Software Foundation version 3 (GPLv3)
--     
--      This program is distributed in the hope that it will be useful,
--      but WITHOUT ANY WARRANTY; without even the implied warranty of
--      MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
--      GNU General Public License for more details.
--     
--      You should have received a copy of the GNU General Public License
--      along with this program; if not, write to the Free Software
--      Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
--      MA 02110-1301, USA.        

]]

require 'cairo'

----------------START OF PARAMETERS ----------
function conky_main_bars()
    local bars_settings={
        {    --[ Graph for CPU1 ]--
            name="cpu",
            arg="cpu1",
            max=100,
            alarm=50,
            alarm_colour={0xFF0000,0.72},
            bg_colour={0xFFFFFF,0.25},
            fg_colour={0x00FF00,0.55},
            mid_colour={{0.45,0xFFFF00,0.70}},
            x=78,y=102,
            blocks=50,
            space=1,
            height=2,width=7,
            angle=90,
            smooth=true
            },
        {    --[ Graph for CPU2 ]--
            name="cpu",
            arg="cpu2",
            max=100,
            alarm=50,
            alarm_colour={0xFF0000,0.72},
            bg_colour={0xFFFFFF,0.25},
            fg_colour={0x00FF00,0.55},
            mid_colour={{0.45,0xFFFF00,0.70}},
            x=78,y=116,
            blocks=50,
            space=1,
            height=2,width=7,
            angle=90,
            smooth=true
            },
        {    --[ Graph for Memory ]--
            name="memperc",
            arg="",
            max=100,
            alarm=50,
            alarm_colour={0xFF0000,0.72},
            bg_colour={0xFFFFFF,0.25},
            fg_colour={0x00FF00,0.55},
            mid_colour={{0.45,0xFFFF00,0.70}},
            x=12,y=247,
            blocks=70,
            space=1,
            height=2,width=7,
            angle=90,
            smooth=true
            },
        {    --[ Graph for p2p ]--
                        name="fs_used_perc",
            arg="/media/p2p",
            max=100,
            alarm=50,
            alarm_colour={0xFF0000,0.72},
            bg_colour={0xFFFFFF,0.25},
            fg_colour={0x00FF00,0.55},
            mid_colour={{0.45,0xFFFF00,0.70}},
            x=12,y=798,
            blocks=70,
            space=1,
            height=2,width=7,
            angle=90,
            smooth=true
            },
        {    --[ Graph for Dane ]--
                        name="fs_used_perc",
            arg="/media/Dane",
            max=100,
            alarm=50,
            alarm_colour={0xFF0000,0.72},
            bg_colour={0xFFFFFF,0.25},
            fg_colour={0x00FF00,0.55},
            mid_colour={{0.45,0xFFFF00,0.70}},
            x=12,y=826,
            blocks=70,
            space=1,
            height=2,width=7,
            angle=90,
            smooth=true
            },
        {    --[ Graph for Film ]--
                        name="fs_used_perc",
            arg="/media/Filmy",
            max=100,
            alarm=50,
            alarm_colour={0xFF0000,0.72},
            bg_colour={0xFFFFFF,0.25},
            fg_colour={0x00FF00,0.55},
            mid_colour={{0.45,0xFFFF00,0.70}},
            x=12,y=854,
            blocks=70,
            space=1,
            height=2,width=7,
            angle=90,
            smooth=true
            },
        {    --[ Graph for Leon ]--
                        name="fs_used_perc",
            arg="/media/Leon",
            max=100,
            alarm=50,
            alarm_colour={0xFF0000,0.72},
            bg_colour={0xFFFFFF,0.25},
            fg_colour={0x00FF00,0.55},
            mid_colour={{0.45,0xFFFF00,0.70}},
            x=12,y=882,
            blocks=70,
            space=1,
            height=2,width=7,
            angle=90,
            smooth=true
            },
        {    --[ Graph for Server ]--
                        name="fs_used_perc",
            arg="/media/Server",
            max=100,
            alarm=50,
            alarm_colour={0xFF0000,0.72},
            bg_colour={0xFFFFFF,0.25},
            fg_colour={0x00FF00,0.55},
            mid_colour={{0.45,0xFFFF00,0.70}},
            x=12,y=910,
            blocks=70,
            space=1,
            height=2,width=7,
            angle=90,
            smooth=true
            },
        --[[    {    --[ Graph for Gry ]--
                        name="fs_used_perc",
            arg="/media/Gry",
            max=100,
            alarm=50,
            alarm_colour={0xFF0000,0.72},
            bg_colour={0xFFFFFF,0.25},
            fg_colour={0x00FF00,0.55},
            mid_colour={{0.45,0xFFFF00,0.70}},
            x=12,y=938,
            blocks=70,
            space=1,
            height=2,width=7,
            angle=90,
            smooth=true
            },]]
            {    --[ Graph for Swap ]--
                        name="swapperc",
            arg="",
            max=100,
            alarm=50,
            alarm_colour={0xFF0000,0.72},
            bg_colour={0xFFFFFF,0.25},
            fg_colour={0x00FF00,0.55},
            mid_colour={{0.45,0xFFFF00,0.70}},
            x=12,y=276,
            blocks=70,
            space=1,
            height=2,width=7,
            angle=90,
            smooth=true
            },
         }    
-----------END OF PARAMETERS--------------


    
    if conky_window == nil then return end
    
    local cs = cairo_xlib_surface_create(conky_window.display, conky_window.drawable, conky_window.visual, conky_window.width, conky_window.height)
    
    cr = cairo_create(cs)    
    --prevent segmentation error when reading cpu state
    if tonumber(conky_parse('${updates}'))>3 then
        for i in pairs(bars_settings) do
            
            draw_multi_bar_graph(bars_settings[i])
            
        end
    end
    cairo_destroy(cr)
    cairo_surface_destroy(cs)
    cr=nil

end



function draw_multi_bar_graph(t)
    cairo_save(cr)
    --check values
    if t.draw_me == true then t.draw_me = nil end
    if t.draw_me ~= nil and conky_parse(tostring(t.draw_me)) ~= "1" then return end    
    if t.name==nil and t.arg==nil then 
        print ("No input values ... use parameters 'name' with 'arg' or only parameter 'arg' ") 
        return
    end
    if t.max==nil then
        print ("No maximum value defined, use 'max'")
        return
    end
    if t.name==nil then t.name="" end
    if t.arg==nil then t.arg="" end

    --set default values    
    if t.x == nil        then t.x = conky_window.width/2 end
    if t.y == nil        then t.y = conky_window.height/2 end
    if t.blocks == nil    then t.blocks=10 end
    if t.height == nil    then t.height=10 end
    if t.angle == nil     then t.angle=0 end
    t.angle = t.angle*math.pi/180
    --line cap style
    if t.cap==nil        then t.cap = "b" end
    local cap="b"
    for i,v in ipairs({"s","r","b"}) do 
        if v==t.cap then cap=v end
    end
    local delta=0
    if t.cap=="r" or t.cap=="s" then delta = t.height end
    if cap=="s" then     cap = CAIRO_LINE_CAP_SQUARE
    elseif cap=="r" then
        cap = CAIRO_LINE_CAP_ROUND
    elseif cap=="b" then
        cap = CAIRO_LINE_CAP_BUTT
    end
    --end line cap style
    --if t.led_effect == nil    then t.led_effect="r" end
    if t.width == nil    then t.width=20 end
    if t.space == nil    then t.space=2 end
    if t.radius == nil    then t.radius=0 end
    if t.angle_bar == nil    then t.angle_bar=0 end
    t.angle_bar = t.angle_bar*math.pi/360 --halt angle
    
    --colours
    if t.bg_colour == nil     then t.bg_colour = {0x00FF00,0.5} end
    if #t.bg_colour~=2         then t.bg_colour = {0x00FF00,0.5} end
    if t.fg_colour == nil     then t.fg_colour = {0x00FF00,1} end
    if #t.fg_colour~=2         then t.fg_colour = {0x00FF00,1} end
    if t.alarm_colour == nil     then t.alarm_colour = t.fg_colour end
    if #t.alarm_colour~=2         then t.alarm_colour = t.fg_colour end

    if t.mid_colour ~= nil then    
        for i=1, #t.mid_colour do    
            if #t.mid_colour[i]~=3 then 
                print ("error in mid_color table")
                t.mid_colour[i]={1,0xFFFFFF,1} 
            end
        end
    end
    
    if t.bg_led ~= nil and #t.bg_led~=2    then t.bg_led = t.bg_colour end
    if t.fg_led ~= nil and #t.fg_led~=2    then t.fg_led = t.fg_colour end
    if t.alarm_led~= nil and #t.alarm_led~=2 then t.alarm_led = t.fg_led end
    
    if t.led_effect~=nil then
        if t.bg_led == nil then t.bg_led = t.bg_colour end
        if t.fg_led == nil     then t.fg_led = t.fg_colour end
        if t.alarm_led == nil  then t.alarm_led = t.fg_led end
    end
    

    if t.alarm==nil then t.alarm = t.max end --0.8*t.max end
    if t.smooth == nil then t.smooth = false end

    if t.skew_x == nil then 
        t.skew_x=0 
    else
        t.skew_x = math.pi*t.skew_x/180    
    end
    if t.skew_y == nil then 
        t.skew_y=0
    else
        t.skew_y = math.pi*t.skew_y/180    
    end
    
    if t.reflection_alpha==nil then t.reflection_alpha=0 end
    if t.reflection_length==nil then t.reflection_length=1 end
    if t.reflection_scale==nil then t.reflection_scale=1 end
    
    --end of default values
    

     local function rgb_to_r_g_b(col_a)
        return ((col_a[1] / 0x10000) % 0x100) / 255., ((col_a[1] / 0x100) % 0x100) / 255., (col_a[1] % 0x100) / 255., col_a[2]
    end
    
    
    --functions used to create patterns

    local function create_smooth_linear_gradient(x0,y0,x1,y1)
        local pat = cairo_pattern_create_linear (x0,y0,x1,y1)
        cairo_pattern_add_color_stop_rgba (pat, 0, rgb_to_r_g_b(t.fg_colour))
        cairo_pattern_add_color_stop_rgba (pat, 1, rgb_to_r_g_b(t.alarm_colour))
        if t.mid_colour ~=nil then
            for i=1, #t.mid_colour do
                cairo_pattern_add_color_stop_rgba (pat, t.mid_colour[i][1], rgb_to_r_g_b({t.mid_colour[i][2],t.mid_colour[i][3]}))
            end
        end
        return pat
    end

    local function create_smooth_radial_gradient(x0,y0,r0,x1,y1,r1)
        local pat =  cairo_pattern_create_radial (x0,y0,r0,x1,y1,r1)
        cairo_pattern_add_color_stop_rgba (pat, 0, rgb_to_r_g_b(t.fg_colour))
        cairo_pattern_add_color_stop_rgba (pat, 1, rgb_to_r_g_b(t.alarm_colour))
        if t.mid_colour ~=nil then
            for i=1, #t.mid_colour do
                cairo_pattern_add_color_stop_rgba (pat, t.mid_colour[i][1], rgb_to_r_g_b({t.mid_colour[i][2],t.mid_colour[i][3]}))
            end
        end
        return pat
    end
    
    local function create_led_linear_gradient(x0,y0,x1,y1,col_alp,col_led)
        local pat = cairo_pattern_create_linear (x0,y0,x1,y1) ---delta, 0,delta+ t.width,0)
        cairo_pattern_add_color_stop_rgba (pat, 0.0, rgb_to_r_g_b(col_alp))
        cairo_pattern_add_color_stop_rgba (pat, 0.5, rgb_to_r_g_b(col_led))
        cairo_pattern_add_color_stop_rgba (pat, 1.0, rgb_to_r_g_b(col_alp))
        return pat
    end

    local function create_led_radial_gradient(x0,y0,r0,x1,y1,r1,col_alp,col_led,mode)
        local pat = cairo_pattern_create_radial (x0,y0,r0,x1,y1,r1)
        if mode==3 then
            cairo_pattern_add_color_stop_rgba (pat, 0, rgb_to_r_g_b(col_alp))                
            cairo_pattern_add_color_stop_rgba (pat, 0.5, rgb_to_r_g_b(col_led))
            cairo_pattern_add_color_stop_rgba (pat, 1, rgb_to_r_g_b(col_alp))                
        else
            cairo_pattern_add_color_stop_rgba (pat, 0, rgb_to_r_g_b(col_led))
            cairo_pattern_add_color_stop_rgba (pat, 1, rgb_to_r_g_b(col_alp))                
        end
        return pat
    end






    local function draw_single_bar()
        --this fucntion is used for bars with a single block (blocks=1) but 
        --the drawing is cut in 3 blocks : value/alarm/background
        --not zvzimzblr for circular bar
        local function create_pattern(col_alp,col_led,bg)
            local pat
            
            if not t.smooth then
                if t.led_effect=="e" then
                    pat = create_led_linear_gradient (-delta, 0,delta+ t.width,0,col_alp,col_led)
                elseif t.led_effect=="a" then
                    pat = create_led_linear_gradient (t.width/2, 0,t.width/2,-t.height,col_alp,col_led)
                elseif  t.led_effect=="r" then
                    pat = create_led_radial_gradient (t.width/2, -t.height/2, 0, t.width/2,-t.height/2,t.height/1.5,col_alp,col_led,2)
                else
                    pat = cairo_pattern_create_rgba  (rgb_to_r_g_b(col_alp))
                end
            else
                if bg then
                    pat = cairo_pattern_create_rgba  (rgb_to_r_g_b(t.bg_colour))
                else
                    pat = create_smooth_linear_gradient(t.width/2, 0, t.width/2,-t.height)
                end
            end
            return pat
        end
        
        local y1=-t.height*pct/100
        local y2,y3
        if pct>(100*t.alarm/t.max) then 
            y1 = -t.height*t.alarm/100
            y2 = -t.height*pct/100
            if t.smooth then y1=y2 end
        end
        
        if t.angle_bar==0 then
        
            --block for fg value
            local pat = create_pattern(t.fg_colour,t.fg_led,false)
            cairo_set_source(cr,pat)
            cairo_rectangle(cr,0,0,t.width,y1)
            cairo_fill(cr)
            cairo_pattern_destroy(pat)
        
            -- block for alarm value            
            if not t.smooth and y2 ~=nil then 
                pat = create_pattern(t.alarm_colour,t.alarm_led,false)
                cairo_set_source(cr,pat)
                cairo_rectangle(cr,0,y1,t.width,y2-y1)
                cairo_fill(cr)
                y3=y2
                cairo_pattern_destroy(pat)
            else
                y2,y3=y1,y1
            end
            -- block for bg value
            cairo_rectangle(cr,0,y2,t.width,-t.height-y3)
            pat = create_pattern(t.bg_colour,t.bg_led,true)
            cairo_set_source(cr,pat)
            cairo_pattern_destroy(pat)
            cairo_fill(cr)
        end        
    end  --end single bar
    





    local function draw_multi_bar()
        --function used for bars with 2 or more blocks
        for pt = 1,t.blocks do 
            --set block y
            local y1 = -(pt-1)*(t.height+t.space)
            local light_on=false
            
            --set colors
            local col_alp = t.bg_colour
            local col_led = t.bg_led
            if pct>=(100/t.blocks) or pct>0 then --ligth on or not the block
                if pct>=(pcb*(pt-1))  then 
                    light_on = true
                    col_alp = t.fg_colour
                    col_led = t.fg_led
                    if pct>=(100*t.alarm/t.max) and (pcb*pt)>(100*t.alarm/t.max) then 
                        col_alp = t.alarm_colour 
                        col_led = t.alarm_led 
                    end
                end
            end

            --set colors
            --have to try to create gradients outside the loop ?
            local pat 
            
            if not t.smooth then
                if t.angle_bar==0 then
                    if t.led_effect=="e" then
                        pat = create_led_linear_gradient (-delta, 0,delta+ t.width,0,col_alp,col_led)
                    elseif t.led_effect=="a" then
                        pat = create_led_linear_gradient (t.width/2, -t.height/2+y1,t.width/2,0+t.height/2+y1,col_alp,col_led)                    
                    elseif  t.led_effect=="r" then
                        pat = create_led_radial_gradient (t.width/2, y1, 0, t.width/2,y1,t.width/1.5,col_alp,col_led,2)    
                    else
                        pat = cairo_pattern_create_rgba  (rgb_to_r_g_b(col_alp))
                    end
                else
                     if t.led_effect=="a"  then
                         pat = create_led_radial_gradient (0, 0, t.radius+(t.height+t.space)*(pt-1),
                                                         0, 0, t.radius+(t.height+t.space)*(pt),                         
                                             col_alp,col_led,3)    
                    else
                        pat = cairo_pattern_create_rgba  (rgb_to_r_g_b(col_alp))                    
                    end
                    
                end
            else
                
                if light_on then
                    if t.angle_bar==0 then
                        pat = create_smooth_linear_gradient(t.width/2, t.height/2, t.width/2,-(t.blocks-0.5)*(t.height+t.space))
                    else
                        pat = create_smooth_radial_gradient(0, 0, (t.height+t.space),  0,0,(t.blocks+1)*(t.height+t.space),2)
                    end
                else        
                    pat = cairo_pattern_create_rgba  (rgb_to_r_g_b(t.bg_colour))
                end
            end
            cairo_set_source (cr, pat)
            cairo_pattern_destroy(pat)

            --draw a block
            if t.angle_bar==0 then
                cairo_move_to(cr,0,y1)
                cairo_line_to(cr,t.width,y1)
            else        
                cairo_arc( cr,0,0,
                    t.radius+(t.height+t.space)*(pt)-t.height/2,
                     -t.angle_bar -math.pi/2 ,
                     t.angle_bar -math.pi/2)
            end
            cairo_stroke(cr)
        end    
    end
    
    
    
    
    local function setup_bar_graph()
        --function used to retrieve the value to display and to set the cairo structure
        if t.blocks ~=1 then t.y=t.y-t.height/2 end
        
        local value = 0
        if t.name ~="" then
            value = tonumber(conky_parse(string.format('${%s %s}', t.name, t.arg)))
            --$to_bytes doesn't work when value has a decimal point,
            --https://garage.maemo.org/plugins/ggit/browse.php/?p=monky;a=commitdiff;h=174c256c81a027a2ea406f5f37dc036fac0a524b;hp=d75e2db5ed3fc788fb8514121f67316ac3e5f29f
            --http://sourceforge.net/tracker/index.php?func=detail&aid=3000865&group_id=143975&atid=757310
            --conky bug?
            --value = (conky_parse(string.format('${%s %s}', t.name, t.arg)))
            --if string.match(value,"%w") then
            --    value = conky_parse(string.format('${to_bytes %s}',value))
            --end
        else
            value = tonumber(t.arg)
        end

        if value==nil then value =0 end
        
        pct = 100*value/t.max
        pcb = 100/t.blocks
        
        cairo_set_line_width (cr, t.height)
        cairo_set_line_cap  (cr, cap)
        cairo_translate(cr,t.x,t.y)
        cairo_rotate(cr,t.angle)

        local matrix0 = cairo_matrix_t:create()
        tolua.takeownership(matrix0)
        cairo_matrix_init (matrix0, 1,t.skew_y,t.skew_x,1,0,0)
        cairo_transform(cr,matrix0)

    
        
        --call the drawing function for blocks
        if t.blocks==1 and t.angle_bar==0 then
            draw_single_bar()
            if t.reflection=="t" or t.reflection=="b" then cairo_translate(cr,0,-t.height) end
        else
            draw_multi_bar()
        end

        --dot for reminder
        --[[
        if t.blocks ~=1 then
            cairo_set_source_rgba(cr,1,0,0,1)
            cairo_arc(cr,0,t.height/2,3,0,2*math.pi)
            cairo_fill(cr)
        else
            cairo_set_source_rgba(cr,1,0,0,1)
            cairo_arc(cr,0,0,3,0,2*math.pi)
            cairo_fill(cr)
        end]]
        
        --call the drawing function for reflection and prepare the mask used        
        if t.reflection_alpha>0 and t.angle_bar==0 then
            local pat2
            local matrix1 = cairo_matrix_t:create()
            tolua.takeownership(matrix1)
            if t.angle_bar==0 then
                pts={-delta/2,(t.height+t.space)/2,t.width+delta,-(t.height+t.space)*(t.blocks)}
                if t.reflection=="t" then
                    cairo_matrix_init (matrix1,1,0,0,-t.reflection_scale,0,-(t.height+t.space)*(t.blocks-0.5)*2*(t.reflection_scale+1)/2)
                    pat2 = cairo_pattern_create_linear (t.width/2,-(t.height+t.space)*(t.blocks),t.width/2,(t.height+t.space)/2)
                elseif t.reflection=="r" then
                    cairo_matrix_init (matrix1,-t.reflection_scale,0,0,1,delta+2*t.width,0)
                    pat2 = cairo_pattern_create_linear (delta/2+t.width,0,-delta/2,0)
                elseif t.reflection=="l" then
                    cairo_matrix_init (matrix1,-t.reflection_scale,0,0,1,-delta,0)
                    pat2 = cairo_pattern_create_linear (-delta/2,0,delta/2+t.width,-0)
                else --bottom
                    cairo_matrix_init (matrix1,1,0,0,-1*t.reflection_scale,0,(t.height+t.space)*(t.reflection_scale+1)/2)
                    pat2 = cairo_pattern_create_linear (t.width/2,(t.height+t.space)/2,t.width/2,-(t.height+t.space)*(t.blocks))
                end
            end
            cairo_transform(cr,matrix1)

            if t.blocks==1 and t.angle_bar==0 then
                draw_single_bar()
                cairo_translate(cr,0,-t.height/2) 
            else
                draw_multi_bar()
            end
            
            
            cairo_set_line_width(cr,0.01)
            cairo_pattern_add_color_stop_rgba (pat2, 0,0,0,0,1-t.reflection_alpha)
            cairo_pattern_add_color_stop_rgba (pat2, t.reflection_length,0,0,0,1)
            if t.angle_bar==0 then
                cairo_rectangle(cr,pts[1],pts[2],pts[3],pts[4])
            end
            cairo_clip_preserve(cr)
            cairo_set_operator(cr,CAIRO_OPERATOR_CLEAR)
            cairo_stroke(cr)
            cairo_mask(cr,pat2)
            cairo_pattern_destroy(pat2)
            cairo_set_operator(cr,CAIRO_OPERATOR_OVER)
            
        end --reflection
        pct,pcb=nil
    end --setup_bar_graph()
    
    --start here !
    setup_bar_graph()
    cairo_restore(cr)
end

W conkyrc dodajesz przed TEXT :

Kod:

####
## Load Lua for bargraphs (required)
## Set the path to your script here.
#
lua_load ~/.conky/bargraph_small.lua
lua_draw_hook_post main_bars

Dostosowujesz parametry, zmieniasz kolorki i wielkość barów i powinno być ok. Tylko tam jeszcze conky z obsługą lua potrzebny. xD

Offline

 

#1541  2013-05-04 14:41:33

  morfik - Cenzor wirtualnego świata

morfik
Cenzor wirtualnego świata
Skąd: ze WSI
Zarejestrowany: 2011-09-15
Serwis

Re: Zrzutki

@P@blo -- zapodaj configa xD

Offline

 

#1542  2013-05-04 14:49:34

  P@blo - Nadworny matematyk

P@blo
Nadworny matematyk
Skąd: Wrocław v Jasło
Zarejestrowany: 2010-11-11

Re: Zrzutki

Na razie jest w fazie dorabiania więc proszę się nie śmiać :)

Kod:

/* See LICENSE file for copyright and license details. */

/* appearance */
static const char font[]            = "-*-terminus-medium-r-*-*-16-*-*-*-*-*-*-*";
static const char normbordercolor[] = "#444444";
static const char normbgcolor[]     = "#222222";
static const char normfgcolor[]     = "#bbbbbb";
static const char selbordercolor[]  = "#005577";
static const char selbgcolor[]      = "#005577";
static const char selfgcolor[]      = "#eeeeee";
static const unsigned int borderpx  = 2;/* border pixel of windows */
static const unsigned int snap      = 32;/* snap pixel */
static const Bool showbar           = True;/* False means no bar */
static const Bool topbar            = True;/* False means bottom bar */
static const int marginbottom       = 12;/* bottom padding for conky */

/* tagging */
static const char *tags[] = { "www", "chat", "alpha", "betha", "gamma" };

static const Rule rules[] = {
    /* class        instance    title   tags mask   isfloating  monitor */
    { "Chromium",   NULL,       NULL,   1 << 0,     False,      -1 },
    { NULL,         NULL,       "EKG2", 1 << 1,     False,      -1 },
    { "Thunar",     NULL,       NULL,   0,          False,      -1 },
};

/* layout(s) */
static const float mfact= 0.55; /* factor of master area size [0.05..0.95] */
static const int nmaster= 1;/* number of clients in master area */
static const Bool resizehints = True; /* True means respect size hints in tiled resizals */

#include </usr/include/X11/XF86keysym.h>
//#include "bstack.c"
//#include "gaplessgrid.c"
//#include "fibonacci.c"
/*
#define HOME "/home/pablo"
#define ICONS HOME"/.icons"
static const Layout layouts[] = {
    { ICONS"/tile.xbm",         "[]=",      tile },
    { ICONS"/bstack.xbm",       "TTT",      bstack },
    { ICONS"/float.xbm",        "><>",      NULL },
    { ICONS"/monocle.xbm",      "[M]",      monocle },
    { ICONS"/grid.xbm",         "###",      gaplessgrid },
    { ICONS"/spiral.xbm",       "(@)",      spiral },
    { ICONS"/dwindle.xbm",      "[\\]",     dwindle },
};
*/
static const Layout layouts[] = {
    /* symbol   arrange function */
    { "[]=",    tile },     /* first entry is default */
    { "><>",    NULL },     /* no layout function means floating behavior */
    { "[M]",    monocle },
};

/* key definitions */
#define MODKEY Mod4Mask
#define ALTKEY Mod1Mask
#define TAGKEYS(KEY,TAG) \
    { MODKEY,                       KEY,    view,       {.ui = 1 << TAG} }, \
    { MODKEY|ControlMask,           KEY,    toggleview, {.ui = 1 << TAG} }, \
    { MODKEY|ShiftMask,             KEY,    tag,        {.ui = 1 << TAG} }, \
    { MODKEY|ControlMask|ShiftMask, KEY,    toggletag,  {.ui = 1 << TAG} },

/* helper for spawning shell commands in the pre dwm-5.0 fashion */
#define SHCMD(cmd) { .v = (const char*[]){ "/bin/sh", "-c", cmd, NULL } }

/* commands */
static const char *dmenucmd[]   = { "dmenu_run", "-fn", font, "-nb", normbgcolor, "-nf", normfgcolor, "-sb", selbgcolor, "-sf", selfgcolor, NULL };
static const char *chromium[]   = { "chromium", NULL };
/*static const char *termcmd[]  = { "uxterm", NULL };*/
static const char *termcmd[]    = { "urxvt", NULL };
static const char *fmcmd[]      = { "thunar", NULL };
static const char *talkcmd[]    = { "urxvt", "-title", "EKG2", "+vb", "-e", "ekg2", NULL };
//static const char *chatcmd[]  = { "gajim", NULL };
//static const char *musiccmd[] = { "urxvt", "-e", "ncmpcpp", NULL };
//static const char *mutecmd[]  = { "amixer", "-q", "sset", "Master", "toggle", NULL };
static const char *volupcmd[]   = { "amixer", "-q", "sset", "PCM", "5+", "unmute", NULL };
static const char *voldowncmd[] = { "amixer", "-q", "sset", "PCM", "5-", "unmute", NULL };
static const char *suspendcmd[] = { "sudo", "pm-suspend", NULL };
static const char *lockcmd[]    = { "xscreensaver-command", "-lock", NULL };

static Key keys[] = {
    /* modifier                     key                     function        argument */
    { MODKEY,                       XK_F1,                  spawn,          {.v = chromium } },
    { MODKEY,                       XK_F2,                  spawn,          {.v = talkcmd } },
    { MODKEY,                       XK_F3,                  spawn,          {.v = fmcmd } },
    { MODKEY,                       XK_p,                   spawn,          {.v = dmenucmd } },
    { MODKEY|ShiftMask,             XK_Return,              spawn,          {.v = termcmd } },
    { MODKEY,                       XK_b,                   togglebar,      {0} },
    { MODKEY,                       XK_j,                   focusstack,     {.i = +1 } },
    { MODKEY,                       XK_k,                   focusstack,     {.i = -1 } },
    { MODKEY,                       XK_i,                   incnmaster,     {.i = +1 } },
    { MODKEY,                       XK_d,                   incnmaster,     {.i = -1 } },
    { MODKEY,                       XK_h,                   setmfact,       {.f = -0.05} },
    { MODKEY,                       XK_l,                   setmfact,       {.f = +0.05} },
    { MODKEY,                       XK_Return,              zoom,           {0} },
    { MODKEY,                       XK_Tab,                 view,           {0} },
//  { MODKEY|ShiftMask,             XK_c,                   killclient,     {0} },
    { ALTKEY,                       XK_F4,                  killclient,     {0} },
    { NULL,                         XF86XK_AudioRaiseVolume,spawn,          {.v = volupcmd } },
    { NULL,                         XF86XK_AudioLowerVolume,spawn,          {.v = voldowncmd } },
    { NULL,                         XF86XK_Sleep,           spawn,          {.v = suspendcmd } },
    { NULL,                         XF86XK_ScreenSaver,     spawn,          {.v = lockcmd } },
    { MODKEY,                       XK_t,                   setlayout,      {.v = &layouts[0]} },
    { MODKEY,                       XK_f,                   setlayout,      {.v = &layouts[1]} },
    { MODKEY,                       XK_m,                   setlayout,      {.v = &layouts[2]} },
    { MODKEY,                       XK_space,               setlayout,      {0} },
    { MODKEY|ShiftMask,             XK_space,               togglefloating, {0} },
    { MODKEY,                       XK_0,                   view,           {.ui = ~0 } },
    { MODKEY|ShiftMask,             XK_0,                   tag,            {.ui = ~0 } },
    { MODKEY,                       XK_comma,               focusmon,       {.i = -1 } },
    { MODKEY,                       XK_period,              focusmon,       {.i = +1 } },
    { MODKEY|ShiftMask,             XK_comma,               tagmon,         {.i = -1 } },
    { MODKEY|ShiftMask,             XK_period,              tagmon,         {.i = +1 } },
    TAGKEYS(                        XK_1,                   0)
    TAGKEYS(                        XK_2,                   1)
    TAGKEYS(                        XK_3,                   2)
    TAGKEYS(                        XK_4,                   3)
    TAGKEYS(                        XK_5,                   4)
//  TAGKEYS(                        XK_6,                   5)
//  TAGKEYS(                        XK_7,                   6)
//  TAGKEYS(                        XK_8,                   7)
//  TAGKEYS(                        XK_9,                   8)
    { MODKEY|ShiftMask,             XK_q,   quit,           {0} },
};

/* button definitions */
/* click can be ClkLtSymbol, ClkStatusText, ClkWinTitle, ClkClientWin, or ClkRootWin */

ThinkPadX220i
| Procesor: Intel(R) Core(TM) i3-2310M CPU @ 2.10GHz |
|  Debian: sid   |   Arch: amd64   |   Sound: alsa   |
| No DE | WM: DWM  |  DM: .bash_profile  |  BIOS+MBR |

Offline

 

#1543  2013-05-04 14:55:03

  dowoszek - Użytkownik

dowoszek
Użytkownik
Zarejestrowany: 2009-04-14

Re: Zrzutki

Morfik, oj, tyle zabawy ztym, że szkoda mi czasu i cyklów procesora ;) Myślałem, że to jakiś tajny bajerek dla conky.

P@blo napisał(-a):

pink napisał(-a):

file-manager i dwm profanacja!!!!  jak juz to tylko mc!

Tak myślałem, że ktoś się tego czepi... ;) Niestety jestem młodziak i nie rozumiem epoki norton commandera, więc pozostaje cp,mv (z czego za zwyczaj korzystam), jednak do przeglądania choćby zdjęć dobrze mieć takiego thunara. ;)

Zanim pojawił się Norton był już XTree i dla mnie to już zawsze będzie 'epoka XTreeGold' :) Jak patrzę zdjęcie na poniższej stronie, to trochę jak na fotkę w rodzinnym albumie ;)
https://en.wikipedia.org/wiki/XTree

Offline

 

#1544  2013-05-08 00:51:17

  pasqdnik - Pijak ;-P

pasqdnik
Pijak ;-P
Skąd: Wrocław
Zarejestrowany: 2006-03-06

Re: Zrzutki

Back to the roots ;-)

http://wnko.pl/thumbs/zrzuteaja.png


Dum spiro - spero ...
pozdrawiam, pasqdnik

Offline

 

#1545  2013-05-08 22:30:49

  klavierKRK - Gość

klavierKRK
Gość

Re: Zrzutki

http://img198.imageshack.us/img198/8108/011368042695.jpg

fluxbox oparty na:
midnight commander, xfce4 terminal

nigdy nie będzie conky, bo za bardzo dekoncentruje !

Ostatnio edytowany przez klavierKRK (2013-05-08 22:38:29)

 

#1546  2013-05-08 23:05:11

  Minio - Użyszkodnik

Minio
Użyszkodnik
Skąd: Poznań, Polska
Zarejestrowany: 2007-12-22
Serwis

Re: Zrzutki

klavierKRK: przesadziłeś z kompresją JPG. Kolory wyszły przekłamane, w ogóle cały zrzut jakiś taki ziarnisty.

Offline

 

#1547  2013-06-04 14:02:28

  qba1707 - Użytkownik

qba1707
Użytkownik
Zarejestrowany: 2011-08-16

Re: Zrzutki

http://wnko.pl/thumbs/debianflux.png

Ostatnio edytowany przez qba1707 (2013-06-06 20:56:12)

Offline

 

#1548  2013-06-10 13:22:53

  fervi - Użytkownik

fervi
Użytkownik
Zarejestrowany: 2010-03-14

Re: Zrzutki

Offline

 

#1549  2013-06-10 13:56:29

  adi1423 - Użytkownik

adi1423
Użytkownik
Zarejestrowany: 2013-04-20

Re: Zrzutki

http://imageshack.us/scaled/landing/23/przechwycenieobrazuekrayc.png

Offline

 

#1550  2013-06-10 15:32:45

  mati75 - Psuj

mati75
Psuj
Skąd: masz ten towar?
Zarejestrowany: 2010-03-14

Re: Zrzutki

http://s15.postimg.org/xr2a1rdp3/2013_06_09_195043_1024x600_scrot.jpg


https://l0calh0st.pl/obrazki/userbar.png

Offline

 

Stopka forum

Powered by PunBB
© Copyright 2002–2005 Rickard Andersson
To nie jest tylko forum, to nasza mała ojczyzna ;-)