Forum Debian Users Gang

maciej@asusf7e:~$ su
Hasło: 
root@asusf7e:/home/maciej# apt-get install firmware-misc-nonfree
Czytanie list pakietów... Gotowe
Budowanie drzewa zależności       
Odczyt informacji o stanie... Gotowe
Zostaną zainstalowane następujące NOWE pakiety:
  firmware-misc-nonfree
0 aktualizowanych, 1 nowo instalowanych, 0 usuwanych i 0 nieaktualizowanych.
Konieczne pobranie 2320 kB archiwów.
Po tej operacji zostanie dodatkowo użyte 8155 kB miejsca na dysku.
Pobieranie:1 http://cdn-fastly.deb.debian.org/debian stretch/non-free amd64 firmware-misc-nonfree all 20161130-4 [2320 kB]
Pobrano 2320 kB w 2s (1083 kB/s)                 
Wybieranie wcześniej niewybranego pakietu firmware-misc-nonfree.
(Odczytywanie bazy danych ... 166906 plików i katalogów obecnie zainstalowanych.)
Przygotowywanie do rozpakowania pakietu .../firmware-misc-nonfree_20161130-4_all.deb ...
Rozpakowywanie pakietu firmware-misc-nonfree (20161130-4) ...
Konfigurowanie pakietu firmware-misc-nonfree (20161130-4) ...
update-initramfs: deferring update (trigger activated)
Przetwarzanie wyzwalaczy pakietu initramfs-tools (0.130)...
update-initramfs: Generating /boot/initrd.img-4.9.0-8-amd64
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8107e-2.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8107e-1.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168h-2.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168h-1.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168g-3.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168g-2.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8106e-2.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8106e-1.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8411-2.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8411-1.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8402-1.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168f-2.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168f-1.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8105e-1.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168e-3.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168e-2.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168e-1.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168d-2.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168d-1.fw for module r8169

root@asusf7e:/home/maciej# dmesg | grep dvb
[   14.036651] dvb-usb: found a 'YUAN High-Tech STK7700PH' in warm state.
[   14.036722] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[   14.509296] dvb-usb: schedule remote query interval to 50 msecs.
[   14.509300] dvb-usb: YUAN High-Tech STK7700PH successfully initialized and connected.
[   14.509490] usbcore: registered new interface driver dvb_usb_dib0700

[    0.250976] pci_bus 0000:05: resource 0 [io  0xc000-0xcfff]
[    0.250978] pci_bus 0000:05: resource 1 [mem 0xfdd00000-0xfe4fffff]
[    0.250980] pci_bus 0000:05: resource 2 [mem 0xbdf00000-0xbfefffff 64bit pref]
[    0.250982] pci_bus 0000:07: resource 1 [mem 0xfe500000-0xfe5fffff]
[    0.250985] pci_bus 0000:08: resource 1 [mem 0xfe600000-0xfe6fffff]
[    0.250987] pci_bus 0000:08: resource 4 [io  0x0000-0x0cf7 window]
[    0.250990] pci_bus 0000:08: resource 5 [io  0x0d00-0xffff window]
[    0.250992] pci_bus 0000:08: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.250994] pci_bus 0000:08: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.250997] pci_bus 0000:08: resource 8 [mem 0x7f800000-0xffffffff window]
[    0.251179] NET: Registered protocol family 2
[    0.251457] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.251535] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.251654] TCP: Hash tables configured (established 16384 bind 16384)
[    0.251723] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.251743] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.251840] NET: Registered protocol family 1
[    0.251870] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.253136] PCI: CLS 32 bytes, default 64
[    0.253230] Unpacking initramfs...
[    0.748223] Freeing initrd memory: 18828K
[    0.749025] audit: initializing netlink subsys (disabled)
[    0.749063] audit: type=2000 audit(1552882871.748:1): initialized
[    0.749695] workingset: timestamp_bits=40 max_order=19 bucket_order=0
[    0.749731] zbud: loaded
[    0.750964] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.751014] io scheduler noop registered
[    0.751015] io scheduler deadline registered
[    0.751033] io scheduler cfq registered (default)
[    0.752689] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[    0.752695] pcie_pme 0000:00:1c.0:pcie001: service driver pcie_pme loaded
[    0.752730] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[    0.752734] pcie_pme 0000:00:1c.1:pcie001: service driver pcie_pme loaded
[    0.752767] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[    0.752769] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[    0.752774] pcie_pme 0000:00:1c.2:pcie001: service driver pcie_pme loaded
[    0.752800] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[    0.752804] pcie_pme 0000:00:1c.3:pcie001: service driver pcie_pme loaded
[    0.752834] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[    0.752839] pcie_pme 0000:00:1c.4:pcie001: service driver pcie_pme loaded
[    0.752865] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
[    0.752867] pci 0000:07:00.0: Signaling PME through PCIe PME interrupt
[    0.752872] pcie_pme 0000:00:1c.5:pcie001: service driver pcie_pme loaded
[    0.752890] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.752907] pciehp 0000:00:1c.4:pcie004: Slot #36 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+
[    0.752944] pciehp 0000:00:1c.4:pcie004: service driver pciehp loaded
[    0.752953] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.752985] intel_idle: does not run on family 6 model 15
[    0.753651] Monitor-Mwait will be used to enter C-1 state
[    0.753664] Monitor-Mwait will be used to enter C-2 state
[    0.753672] tsc: Marking TSC unstable due to TSC halts in idle
[    0.754116] GHES: HEST is not enabled!
[    0.754243] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.754959] Linux agpgart interface v0.103
[    0.755204] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    0.755206] AMD IOMMUv2 functionality not available on this system
[    0.755511] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    0.757727] i8042: Detected active multiplexing controller, rev 1.1
[    0.758377] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.758387] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    0.758449] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    0.758500] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    0.758549] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    0.758792] mousedev: PS/2 mouse device common for all mice
[    0.758863] rtc_cmos 00:01: RTC can wake from S4
[    0.759035] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    0.759065] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.759110] ledtrig-cpu: registered to indicate activity on CPUs
[    0.759647] NET: Registered protocol family 10
[    0.760025] mip6: Mobile IPv6
[    0.760029] NET: Registered protocol family 17
[    0.760033] mpls_gso: MPLS GSO support
[    0.760305] microcode: sig=0x6fd, pf=0x80, revision=0xa3
[    0.760377] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.760601] registered taskstats version 1
[    0.760633] zswap: loaded using pool lzo/zbud
[    0.760757] ima: No TPM chip found, activating TPM-bypass!
[    0.760760] ima: Allocated hash algorithm: sha256
[    0.761314] rtc_cmos 00:01: setting system clock to 2019-03-18 04:21:12 UTC (1552882872)
[    0.761372] PM: Hibernation image not present or could not be loaded.
[    0.763282] Freeing unused kernel memory: 1424K
[    0.763286] Write protecting the kernel read-only data: 12288k
[    0.765069] Freeing unused kernel memory: 1908K
[    0.769662] Freeing unused kernel memory: 1224K
[    0.778449] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.793860] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.805895] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    0.806084] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    0.806104] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    0.866627] ACPI: bus type USB registered
[    0.866676] usbcore: registered new interface driver usbfs
[    0.866695] usbcore: registered new interface driver hub
[    0.866748] usbcore: registered new device driver usb
[    0.867806] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.868533] uhci_hcd: USB Universal Host Controller Interface driver
[    0.868775] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    0.868789] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.868802] uhci_hcd 0000:00:1a.0: detected 2 ports
[    0.868848] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000dc00
[    0.870782] ehci-pci: EHCI PCI platform driver
[    0.871292] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[    0.871295] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.871297] usb usb1: Product: UHCI Host Controller
[    0.871300] usb usb1: Manufacturer: Linux 4.9.0-8-amd64 uhci_hcd
[    0.871302] usb usb1: SerialNumber: 0000:00:1a.0
[    0.871906] hub 1-0:1.0: USB hub found
[    0.871920] hub 1-0:1.0: 2 ports detected
[    0.872377] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    0.872389] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[    0.872402] uhci_hcd 0000:00:1a.1: detected 2 ports
[    0.872444] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000d880
[    0.872563] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    0.872566] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.872569] usb usb2: Product: UHCI Host Controller
[    0.872571] usb usb2: Manufacturer: Linux 4.9.0-8-amd64 uhci_hcd
[    0.872573] usb usb2: SerialNumber: 0000:00:1a.1
[    0.872832] hub 2-0:1.0: USB hub found
[    0.872844] hub 2-0:1.0: 2 ports detected
[    0.873244] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.873257] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
[    0.873269] uhci_hcd 0000:00:1d.0: detected 2 ports
[    0.873312] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d800
[    0.873422] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    0.873425] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.873428] usb usb3: Product: UHCI Host Controller
[    0.873430] usb usb3: Manufacturer: Linux 4.9.0-8-amd64 uhci_hcd
[    0.873432] usb usb3: SerialNumber: 0000:00:1d.0
[    0.873690] hub 3-0:1.0: USB hub found
[    0.873702] hub 3-0:1.0: 2 ports detected
[    0.874555] ehci-pci 0000:00:1a.7: EHCI Host Controller
[    0.874572] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 4
[    0.874590] ehci-pci 0000:00:1a.7: debug port 1
[    0.878506] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported
[    0.878713] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfeaff400
[    0.892078] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    0.892209] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[    0.892212] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.892214] usb usb4: Product: EHCI Host Controller
[    0.892217] usb usb4: Manufacturer: Linux 4.9.0-8-amd64 ehci_hcd
[    0.892219] usb usb4: SerialNumber: 0000:00:1a.7
[    0.892473] hub 4-0:1.0: USB hub found
[    0.892489] hub 4-0:1.0: 4 ports detected
[    0.894831] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    0.894852] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[    0.895465] r8169 0000:03:00.0 eth0: RTL8168b/8111b at 0xffffadd7c0351000, 00:22:15:5e:47:15, XID 18000000 IRQ 30
[    0.895468] r8169 0000:03:00.0 eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko]
[    0.906971] SCSI subsystem initialized
[    0.907077] sdhci: Secure Digital Host Controller Interface driver
[    0.907079] sdhci: Copyright(c) Pierre Ossman
[    0.907859] sdhci-pci 0000:08:01.1: SDHCI controller found [1180:0822] (rev 22)
[    0.909140] sdhci-pci 0000:08:01.1: Will use DMA mode even though HW doesn't fully claim to support it.
[    0.910143] sdhci-pci 0000:08:01.1: Will use DMA mode even though HW doesn't fully claim to support it.
[    0.913841] sdhci-pci 0000:08:01.1: Will use DMA mode even though HW doesn't fully claim to support it.
[    0.914912] mmc0: SDHCI controller on PCI [0000:08:01.1] using DMA
[    0.915774] libata version 3.00 loaded.
[    0.920198] hub 1-0:1.0: USB hub found
[    0.920216] hub 1-0:1.0: 2 ports detected
[    0.948190] hub 2-0:1.0: USB hub found
[    0.948206] hub 2-0:1.0: 2 ports detected
[    0.948680] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.948691] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 5
[    0.948706] ehci-pci 0000:00:1d.7: debug port 1
[    0.952631] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[    0.952837] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfeaff000
[    0.968389] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.968503] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[    0.968506] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.968508] usb usb5: Product: EHCI Host Controller
[    0.968511] usb usb5: Manufacturer: Linux 4.9.0-8-amd64 ehci_hcd
[    0.968513] usb usb5: SerialNumber: 0000:00:1d.7
[    0.968749] hub 5-0:1.0: USB hub found
[    0.968762] hub 5-0:1.0: 6 ports detected
[    0.986963] sdhci-pci 0000:08:01.1: Will use DMA mode even though HW doesn't fully claim to support it.
[    0.988058] firewire_ohci 0000:08:01.0: added OHCI v1.0 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
[    0.996232] hub 3-0:1.0: USB hub found
[    0.996277] hub 3-0:1.0: 2 ports detected
[    0.996707] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.996717] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[    0.996730] uhci_hcd 0000:00:1d.1: detected 2 ports
[    0.996769] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d480
[    0.996989] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    0.996992] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.996995] usb usb6: Product: UHCI Host Controller
[    0.996997] usb usb6: Manufacturer: Linux 4.9.0-8-amd64 uhci_hcd
[    0.996999] usb usb6: SerialNumber: 0000:00:1d.1
[    0.998193] hub 6-0:1.0: USB hub found
[    0.998214] hub 6-0:1.0: 2 ports detected
[    0.998554] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.998564] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[    0.998573] uhci_hcd 0000:00:1d.2: detected 2 ports
[    0.998598] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d400
[    0.999871] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    0.999875] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.999877] usb usb7: Product: UHCI Host Controller
[    0.999879] usb usb7: Manufacturer: Linux 4.9.0-8-amd64 uhci_hcd
[    0.999882] usb usb7: SerialNumber: 0000:00:1d.2
[    1.000186] hub 7-0:1.0: USB hub found
[    1.000476] hub 7-0:1.0: 2 ports detected
[    1.001145] ata_piix 0000:00:1f.1: version 2.13
[    1.008983] r8169 0000:03:00.0 enp3s0: renamed from eth0
[    1.014316] scsi host0: ata_piix
[    1.014787] scsi host1: ata_piix
[    1.014899] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[    1.014902] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[    1.015113] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    1.016291] ata2: port disabled--ignoring
[    1.037175] thermal LNXTHERM:00: registered as thermal_zone0
[    1.037179] ACPI: Thermal Zone [THRM] (51 C)
[    1.067010] sdhci-pci 0000:08:01.1: Will use DMA mode even though HW doesn't fully claim to support it.
[    1.148867] sdhci-pci 0000:08:01.1: Will use DMA mode even though HW doesn't fully claim to support it.
[    1.173425] scsi host2: ata_piix
[    1.173613] scsi host3: ata_piix
[    1.173707] ata3: SATA max UDMA/133 cmd 0xe880 ctl 0xe800 bmdma 0xe080 irq 20
[    1.173713] ata4: SATA max UDMA/133 cmd 0xe480 ctl 0xe400 bmdma 0xe088 irq 20
[    1.199270] ata1.00: ATAPI: HL-DT-ST DVDRAM GSA-T40N, JR03, max UDMA/33
[    1.220022] usb 4-2: new high-speed USB device number 2 using ehci-pci
[    1.220315] ata1.00: configured for UDMA/33
[    1.226526] scsi 0:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-T40N  JR03 PQ: 0 ANSI: 5
[    1.233133] sdhci-pci 0000:08:01.1: Will use DMA mode even though HW doesn't fully claim to support it.
[    1.369780] usb 4-2: New USB device found, idVendor=1164, idProduct=1f08
[    1.369783] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.369786] usb 4-2: Product: STK7700D
[    1.369788] usb 4-2: Manufacturer: YUANRD
[    1.369790] usb 4-2: SerialNumber: 0000000001
[    1.380024] random: fast init done
[    1.488023] usb 4-3: new high-speed USB device number 3 using ehci-pci
[    1.496046] usb 3-2: new full-speed USB device number 2 using uhci_hcd
[    1.500267] firewire_core 0000:08:01.0: created device fw0: GUID 001e8c0001626955, S400
[    1.649768] usb 4-3: New USB device found, idVendor=04f2, idProduct=b012
[    1.649772] usb 4-3: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[    1.649774] usb 4-3: Product: USB2.0 1.3M UVC WebCam 
[    1.649776] usb 4-3: Manufacturer: Chicony Electronics Co., Ltd.
[    1.649778] usb 4-3: SerialNumber: SN0001
[    1.756061] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x35ade9384b9, max_idle_ns: 881590424060 ns
[    1.795085] psmouse serio4: synaptics: Touchpad model: 1, fw: 6.1, id: 0xa3a0b3, caps: 0xa04713/0x10008/0x0/0x0, board id: 0, fw id: 30712
[    1.835139] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8
[    1.884104] usb 3-2: New USB device found, idVendor=045e, idProduct=07b2
[    1.884107] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.884110] usb 3-2: Product: MicrosoftŸ Nano Transceiver v1.0
[    1.884112] usb 3-2: Manufacturer: Microsoft
[    1.889760] hidraw: raw HID events driver (C) Jiri Kosina
[    1.907975] usbcore: registered new interface driver usbhid
[    1.907979] usbhid: USB HID core driver
[    1.909908] input: Microsoft MicrosoftŸ Nano Transceiver v1.0 as /devices/pci0000:00/0000:00:1d.0/usb3/3-2/3-2:1.0/0003:045E:07B2.0001/input/input9
[    1.911215] sr 0:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.911218] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.911599] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    1.956104] ata3.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.956117] ata3.01: SATA link down (SStatus 0 SControl 300)
[    1.958497] ata3.00: ATA-8: ST9250827AS, 3.AAA, max UDMA/133
[    1.958500] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.963106] ata3.00: configured for UDMA/133
[    1.963384] scsi 2:0:0:0: Direct-Access     ATA      ST9250827AS      A    PQ: 0 ANSI: 5
[    1.968303] hid-generic 0003:045E:07B2.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft MicrosoftŸ Nano Transceiver v1.0] on usb-0000:00:1d.0-2/input0
[    1.969116] input: Microsoft MicrosoftŸ Nano Transceiver v1.0 as /devices/pci0000:00/0000:00:1d.0/usb3/3-2/3-2:1.1/0003:045E:07B2.0002/input/input10
[    1.969241] hid-generic 0003:045E:07B2.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft MicrosoftŸ Nano Transceiver v1.0] on usb-0000:00:1d.0-2/input1
[    1.988457] input: Microsoft MicrosoftŸ Nano Transceiver v1.0 as /devices/pci0000:00/0000:00:1d.0/usb3/3-2/3-2:1.2/0003:045E:07B2.0003/input/input11
[    2.048224] hid-generic 0003:045E:07B2.0003: input,hiddev0,hidraw2: USB HID v1.11 Device [Microsoft MicrosoftŸ Nano Transceiver v1.0] on usb-0000:00:1d.0-2/input2
[    2.528053] ata4.01: failed to resume link (SControl 0)
[    2.538799] ata4.00: SATA link down (SStatus 0 SControl 300)
[    2.538813] ata4.01: SATA link down (SStatus 0 SControl 0)
[    2.541948] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[    2.542021] sd 2:0:0:0: [sda] Write Protect is off
[    2.542025] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.542056] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.577871]  sda: sda1 sda2 < sda5 >
[    2.578520] sd 2:0:0:0: [sda] Attached SCSI disk
[    2.596052] usb 7-2: new full-speed USB device number 2 using uhci_hcd
[    2.851090] usb 7-2: New USB device found, idVendor=0b05, idProduct=1712
[    2.851094] usb 7-2: New USB device strings: Mfr=0, Product=0, SerialNumber=3
[    2.851096] usb 7-2: SerialNumber: 0194E8-5B-0002
[    3.105306] PM: Starting manual resume from disk
[    3.105312] PM: Hibernation image partition 8:5 present
[    3.105313] PM: Looking for hibernation image.
[    3.105550] PM: Image not found (code -22)
[    3.105552] PM: Hibernation image not present or could not be loaded.
[    3.452445] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    4.795689] ip_tables: (C) 2000-2006 Netfilter Core Team
[    4.892221] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    4.892455] systemd[1]: Detected architecture x86-64.
[    4.905706] systemd[1]: Set hostname to <asusf7e>.
[    5.158368] random: crng init done
[    5.158372] random: 7 urandom warning(s) missed due to ratelimiting
[    6.096902] systemd[1]: Listening on fsck to fsckd communication Socket.
[    6.097115] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    6.097194] systemd[1]: Listening on udev Kernel Socket.
[    6.097494] systemd[1]: Created slice User and Session Slice.
[    6.097816] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    6.097864] systemd[1]: Reached target User and Group Name Lookups.
[    6.097961] systemd[1]: Listening on Syslog Socket.
[    6.491790] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    6.932193] lp: driver loaded but no devices found
[    7.082278] ppdev: user-space parallel port driver
[    7.174489] systemd-journald[191]: Received request to flush runtime journal from PID 1
[    9.660822] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input12
[    9.660829] ACPI: Sleep Button [SLPB]
[    9.661974] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input13
[    9.662756] ACPI: Lid Switch [LID]
[    9.662869] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input14
[    9.662874] ACPI: Power Button [PWRF]
[    9.889963] ACPI: Battery Slot [BAT0] (battery present)
[   10.057647] ACPI: AC Adapter [AC0] (on-line)
[   10.114740] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   10.304144] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC660-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   10.304148] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   10.304151] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   10.304153] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   10.304156] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x1e/0x0
[   10.304158] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   10.304161] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x19
[   10.304164] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[   10.463343] sr 0:0:0:0: Attached scsi generic sg0 type 5
[   10.463414] sd 2:0:0:0: Attached scsi generic sg1 type 0
[   10.536488] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000084F (\PMIO) (20160831/utaddress-247)
[   10.536499] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.536502] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000053F (\GPIO) (20160831/utaddress-247)
[   10.536507] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.536508] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000053F (\GPIO) (20160831/utaddress-247)
[   10.536513] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.536514] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   10.735228] asus_laptop: Asus Laptop Support version 0.42
[   10.735821] asus_laptop:   F7E model detected
[   10.737025] input: Asus Laptop extra buttons as /devices/platform/asus_laptop/input/input18
[   10.772981] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[   10.773523] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[   10.773584] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[   10.929860] [drm] Initialized
[   11.051243] r592: driver successfully loaded
[   11.189198] r852: driver loaded successfully
[   11.246444] pci 0000:00:00.0: Intel 965GM Chipset
[   11.246471] pci 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[   11.246749] pci 0000:00:00.0: detected 8192K stolen memory
[   11.246789] [drm] Memory usable by graphics device = 512M
[   11.246794] [drm] Replacing VGA console driver
[   11.247870] Console: switching to colour dummy device 80x25
[   11.256041] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   11.256043] [drm] Driver supports precise vblank timestamp query.
[   11.258547] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   11.301250] [drm] RC6 disabled, disabling runtime PM support
[   11.301266] [drm] initialized overlay support
[   11.321120] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   11.326375] acpi device:1d: registered as cooling_device2
[   11.326493] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input19
[   11.326642] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0
[   11.343699] fbcon: inteldrmfb (fb0) is primary device
[   11.534152] Bluetooth: Core ver 2.22
[   11.534189] NET: Registered protocol family 31
[   11.534190] Bluetooth: HCI device and connection manager initialized
[   11.534196] Bluetooth: HCI socket layer initialized
[   11.534201] Bluetooth: L2CAP socket layer initialized
[   11.534216] Bluetooth: SCO socket layer initialized
[   11.625688] input: PC Speaker as /devices/platform/pcspkr/input/input20
[   11.984562] intel_powerclamp: No package C-state available
[   12.035141] intel_powerclamp: No package C-state available
[   12.035141] media: Linux media interface: v0.10
[   12.048357] iTCO_vendor_support: vendor-support=0
[   12.078730] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s
[   12.078731] iwl3945: Copyright(c) 2003-2011 Intel Corporation
[   12.078832] iwl3945 0000:07:00.0: can't disable ASPM; OS doesn't have ASPM control
[   12.116473] Console: switching to colour frame buffer device 180x56
[   12.132833] iwl3945 0000:07:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
[   12.132836] iwl3945 0000:07:00.0: Detected Intel Wireless WiFi Link 3945ABG
[   12.137040] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   12.148511] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   12.148593] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x0860)
[   12.148780] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   12.315285] usbcore: registered new interface driver btusb
[   12.339170] ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs'
[   12.703552] Linux video capture interface: v2.00
[   13.170302] uvcvideo: Found UVC 1.00 device USB2.0 1.3M UVC WebCam  (04f2:b012)
[   13.173404] uvcvideo 4-3:1.0: Entity type for entity Extension 4 was not initialized!
[   13.173412] uvcvideo 4-3:1.0: Entity type for entity Processing 3 was not initialized!
[   13.173415] uvcvideo 4-3:1.0: Entity type for entity Camera 1 was not initialized!
[   13.173796] input: USB2.0 1.3M UVC WebCam  as /devices/pci0000:00/0000:00:1a.7/usb4/4-3/4-3:1.0/input/input21
[   13.174346] usbcore: registered new interface driver uvcvideo
[   13.174347] USB Video Class driver (1.1.1)
[   14.036651] dvb-usb: found a 'YUAN High-Tech STK7700PH' in warm state.
[   14.036722] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[   14.036851] DVB: registering new adapter (YUAN High-Tech STK7700PH)
[   14.258316] Adding 2086908k swap on /dev/sda5.  Priority:-1 extents:1 across:2086908k FS
[   14.405404] usb 4-2: DVB: registering adapter 0 frontend 0 (DiBcom 7000PC)...
[   14.435605] xc2028 7-0061: creating new instance
[   14.435609] xc2028 7-0061: type set to XCeive xc2028/xc3028 tuner
[   14.508047] Registered IR keymap rc-dib0700-rc5
[   14.508246] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1a.7/usb4/4-2/rc/rc0/input22
[   14.508366] rc rc0: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1a.7/usb4/4-2/rc/rc0
[   14.509296] dvb-usb: schedule remote query interval to 50 msecs.
[   14.509300] dvb-usb: YUAN High-Tech STK7700PH successfully initialized and connected.
[   14.509490] usbcore: registered new interface driver dvb_usb_dib0700
[   14.733887] usb 4-2: firmware: direct-loading firmware xc3028-v27.fw
[   14.733902] xc2028 7-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7
[   15.168670] iwl3945 0000:07:00.0 wlp7s0: renamed from wlan0
[   20.843933] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   20.843937] Bluetooth: BNEP filters: protocol multicast
[   20.843944] Bluetooth: BNEP socket layer initialized
[   23.592343] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[   23.632091] r8169 0000:03:00.0 enp3s0: link down
[   23.632156] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[   23.652523] IPv6: ADDRCONF(NETDEV_UP): wlp7s0: link is not ready
[   23.677861] iwl3945 0000:07:00.0: firmware: direct-loading firmware iwlwifi-3945-2.ucode
[   23.677871] iwl3945 0000:07:00.0: loaded firmware version 15.32.2.9
[   23.751929] IPv6: ADDRCONF(NETDEV_UP): wlp7s0: link is not ready
[   23.827889] IPv6: ADDRCONF(NETDEV_UP): wlp7s0: link is not ready
[   24.882288] IPv6: ADDRCONF(NETDEV_UP): wlp7s0: link is not ready
[   42.341290] IPv6: ADDRCONF(NETDEV_UP): wlp7s0: link is not ready
[   45.753286] wlp7s0: authenticate with 78:44:76:d9:81:d8
[   45.756985] wlp7s0: send auth to 78:44:76:d9:81:d8 (try 1/3)
[   45.758718] wlp7s0: authenticated
[   45.764042] wlp7s0: associate with 78:44:76:d9:81:d8 (try 1/3)
[   45.766779] wlp7s0: RX AssocResp from 78:44:76:d9:81:d8 (capab=0x411 status=0 aid=2)
[   45.776532] wlp7s0: associated
[   46.502865] IPv6: ADDRCONF(NETDEV_CHANGE): wlp7s0: link becomes ready
[   51.268261] Bluetooth: RFCOMM TTY layer initialized
[   51.268275] Bluetooth: RFCOMM socket layer initialized
[   51.268290] Bluetooth: RFCOMM ver 1.11