Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!

Ogłoszenie

Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.

#26  2017-11-05 20:12:35

  antonion - Użytkownik

antonion
Użytkownik
Zarejestrowany: 2017-11-05

Re: Instalacja karty wifi usb tp-link wn822n

Usunąłem # przy dwóch ostatnich repozytoriach. Zrobiłem aktualizację. Zrestartowałem system.

Offline

 

#27  2017-11-05 21:05:26

  antonion - Użytkownik

antonion
Użytkownik
Zarejestrowany: 2017-11-05

Re: Instalacja karty wifi usb tp-link wn822n

Karta jest, sieć wykrywa, ale nie ma Internetu. Co tam jeszcze trzeba zrobić?

Offline

 

#28  2017-11-05 21:27:27

  ilin - Palacz

ilin
Palacz
Skąd: PRLu
Zarejestrowany: 2006-05-03

Re: Instalacja karty wifi usb tp-link wn822n

Połączyć się z siecią.


Problemy rozwiązujemy na forum nie na PW -> Niech inni na tym skorzystają.
Polski portal Debiana

Offline

 

#29  2017-11-05 21:54:36

  antonion - Użytkownik

antonion
Użytkownik
Zarejestrowany: 2017-11-05

Re: Instalacja karty wifi usb tp-link wn822n

Sieć połączona. Klucz wszystko wprowadzone. Coś pewnie w konfiguracji jeszcze. Jak łącze przez kabel współdzielony z laptopa jest OK. Cały czas: nie odnaleziono adresu.
Tak czy inaczej wielkie, wielkie dzięki za pomoc. Taka bezinteresowna pomoc daje wiarę w ludzi. Pozdrawiam

Offline

 

#30  2017-11-05 22:01:14

  antonion - Użytkownik

antonion
Użytkownik
Zarejestrowany: 2017-11-05

Re: Instalacja karty wifi usb tp-link wn822n

Nawet bym powiedział, że łączy i rozłącza zaraz po nawiązaniu połączenia.

Offline

 

#31  2017-11-05 22:11:52

  ilin - Palacz

ilin
Palacz
Skąd: PRLu
Zarejestrowany: 2006-05-03

Re: Instalacja karty wifi usb tp-link wn822n

Być może ten sterownik z jądra jest do kitu.
Możesz spróbować tej metody.

https://askubuntu.com/questions/832087/how-to-insta … 22n-on-ubuntu


Problemy rozwiązujemy na forum nie na PW -> Niech inni na tym skorzystają.
Polski portal Debiana

Offline

 

#32  2017-11-05 22:54:42

  yossarian - Szczawiożerca

yossarian
Szczawiożerca
Skąd: Shangri-La
Zarejestrowany: 2011-04-25

Re: Instalacja karty wifi usb tp-link wn822n

antonion napisał(-a):

Nawet bym powiedział, że łączy i rozłącza zaraz po nawiązaniu połączenia.

A jakieś konkrety?
W jaki sposób się łączysz z siecią?
Może będzie coś widać w wynikach:

Kod:

dmesg

@ilin:
rtl8xxxu to właśnie posprzątany kod i przepisany sterownik (z tych wszystkich prowizorek z gita, które nie miały szans być włączone do jądra) do tych wszystkich tanich chipów Realteka.
http://www.linuxplumbersconf.org/2016/ocw/proposals/4089.html

Offline

 

#33  2017-11-05 23:12:29

  antonion - Użytkownik

antonion
Użytkownik
Zarejestrowany: 2017-11-05

Re: Instalacja karty wifi usb tp-link wn822n

Kod:

Wynik dmesg
[    0.081437] pci 0000:00:0a.0: reg 0x10: [io  0x09f0-0x09f7]
[    0.081441] pci 0000:00:0a.0: reg 0x14: [io  0x0bf0-0x0bf3]
[    0.081445] pci 0000:00:0a.0: reg 0x18: [io  0x0970-0x0977]
[    0.081450] pci 0000:00:0a.0: reg 0x1c: [io  0x0b70-0x0b73]
[    0.081454] pci 0000:00:0a.0: reg 0x20: [io  0xdc00-0xdc0f]
[    0.081458] pci 0000:00:0a.0: reg 0x24: [io  0xe000-0xe07f]
[    0.081626] pci 0000:00:0b.0: [10de:00e2] type 01 class 0x060400
[    0.081809] pci 0000:00:0e.0: [10de:00ed] type 01 class 0x060400
[    0.081995] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
[    0.082157] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
[    0.082313] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
[    0.082463] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
[    0.082668] pci 0000:01:00.0: [1002:5961] type 00 class 0x030000
[    0.082684] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xd7ffffff pref]
[    0.082692] pci 0000:01:00.0: reg 0x14: [io  0xa000-0xa0ff]
[    0.082700] pci 0000:01:00.0: reg 0x18: [mem 0xe9010000-0xe901ffff]
[    0.082723] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[    0.082751] pci 0000:01:00.0: supports D1 D2
[    0.082811] pci 0000:01:00.1: [1002:5941] type 00 class 0x038000
[    0.082824] pci 0000:01:00.1: reg 0x10: [mem 0xd8000000-0xdfffffff pref]
[    0.082830] pci 0000:01:00.1: reg 0x14: [mem 0xe9000000-0xe900ffff]
[    0.082872] pci 0000:01:00.1: supports D1 D2
[    0.082945] pci 0000:00:0b.0: PCI bridge to [bus 01]
[    0.082949] pci 0000:00:0b.0:   bridge window [io  0xa000-0xafff]
[    0.082952] pci 0000:00:0b.0:   bridge window [mem 0xe8000000-0xe9ffffff]
[    0.082956] pci 0000:00:0b.0:   bridge window [mem 0xd0000000-0xdfffffff pref]
[    0.083010] pci 0000:00:0e.0: PCI bridge to [bus 02]
[    0.083018] pci_bus 0000:00: on NUMA node 0
[    0.083182] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.083260] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.083333] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.083406] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.083479] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.083553] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.083626] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.083701] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.083773] ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.083847] ACPI: PCI Interrupt Link [LACI] (IRQs *3 4 5 6 7 10 11 12 14 15)
[    0.083921] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.083995] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.084077] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.084149] ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.084222] ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.084294] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.084373] ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.084453] ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.084526] ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
[    0.084587] ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled.
[    0.084648] ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled.
[    0.084709] ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled.
[    0.084771] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
[    0.084863] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
[    0.084955] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
[    0.085048] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
[    0.085141] ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22 23) *0, disabled.
[    0.085233] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
[    0.085325] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
[    0.085417] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
[    0.085509] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
[    0.085601] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
[    0.085694] ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22 23) *0, disabled.
[    0.085786] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[    0.085889] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.
[    0.085993] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
[    0.086814] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[    0.086817] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.086820] pci 0000:01:00.0: vgaarb: bridge control possible
[    0.086821] vgaarb: loaded
[    0.086914] EDAC MC: Ver: 3.0.0
[    0.087106] PCI: Using ACPI for IRQ routing
[    0.087111] PCI: pci_cache_line_size set to 64 bytes
[    0.087144] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[    0.087147] e820: reserve RAM buffer [mem 0x8fff0000-0x8fffffff]
[    0.087412] clocksource: Switched to clocksource refined-jiffies
[    0.108292] VFS: Disk quotas dquot_6.6.0
[    0.108329] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.108482] pnp: PnP ACPI init
[    0.108631] system 00:00: [io  0x4000-0x407f] has been reserved
[    0.108634] system 00:00: [io  0x4080-0x40ff] has been reserved
[    0.108637] system 00:00: [io  0x4400-0x447f] has been reserved
[    0.108640] system 00:00: [io  0x4480-0x44ff] has been reserved
[    0.108642] system 00:00: [io  0x4800-0x487f] has been reserved
[    0.108645] system 00:00: [io  0x4880-0x48ff] has been reserved
[    0.108651] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.108895] system 00:01: [mem 0x000d5800-0x000d7fff] has been reserved
[    0.108898] system 00:01: [mem 0x000f0000-0x000f7fff] could not be reserved
[    0.108901] system 00:01: [mem 0x000f8000-0x000fbfff] could not be reserved
[    0.108903] system 00:01: [mem 0x000fc000-0x000fffff] could not be reserved
[    0.108906] system 00:01: [mem 0x8fff0000-0x8fffffff] could not be reserved
[    0.108909] system 00:01: [mem 0xffff0000-0xffffffff] has been reserved
[    0.108912] system 00:01: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.108914] system 00:01: [mem 0x00100000-0x8ffeffff] could not be reserved
[    0.108917] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.108919] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved
[    0.108922] system 00:01: [mem 0xfefff000-0xfeffffff] could not be reserved
[    0.108925] system 00:01: [mem 0xfff80000-0xfff80fff] has been reserved
[    0.108927] system 00:01: [mem 0xfff90000-0xfffbffff] has been reserved
[    0.108930] system 00:01: [mem 0xfffed000-0xfffeffff] has been reserved
[    0.108933] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.109683] system 00:02: [io  0x0b78-0x0b7b] has been reserved
[    0.109686] system 00:02: [io  0x0f78-0x0f7b] has been reserved
[    0.109689] system 00:02: [io  0x0a78-0x0a7b] has been reserved
[    0.109691] system 00:02: [io  0x0e78-0x0e7b] has been reserved
[    0.109694] system 00:02: [io  0x0bbc-0x0bbf] has been reserved
[    0.109696] system 00:02: [io  0x0fbc-0x0fbf] has been reserved
[    0.109699] system 00:02: [io  0x04d0-0x04d1] has been reserved
[    0.109702] system 00:02: [io  0x0290-0x0297] has been reserved
[    0.109705] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.109757] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.109891] pnp 00:04: [dma 2]
[    0.109937] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.110186] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.110657] pnp 00:06: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.110794] pnp 00:07: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.110852] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.110878] pnp: PnP ACPI: found 9 devices
[    0.110881] PnPBIOS: Disabled
[    0.147831] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.147849] clocksource: Switched to clocksource acpi_pm
[    0.147882] pci 0000:01:00.0: BAR 6: assigned [mem 0xe8000000-0xe801ffff pref]
[    0.147885] pci 0000:00:0b.0: PCI bridge to [bus 01]
[    0.147888] pci 0000:00:0b.0:   bridge window [io  0xa000-0xafff]
[    0.147893] pci 0000:00:0b.0:   bridge window [mem 0xe8000000-0xe9ffffff]
[    0.147897] pci 0000:00:0b.0:   bridge window [mem 0xd0000000-0xdfffffff pref]
[    0.147902] pci 0000:00:0e.0: PCI bridge to [bus 02]
[    0.147909] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.147911] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.147913] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.147915] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window]
[    0.147918] pci_bus 0000:00: resource 8 [mem 0x90000000-0xfebfffff window]
[    0.147920] pci_bus 0000:01: resource 0 [io  0xa000-0xafff]
[    0.147922] pci_bus 0000:01: resource 1 [mem 0xe8000000-0xe9ffffff]
[    0.147924] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff pref]
[    0.147924] NET: Registered protocol family 2
[    0.147924] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.147924] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.147924] TCP: Hash tables configured (established 8192 bind 8192)
[    0.147924] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.147924] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.147924] NET: Registered protocol family 1
[    0.147924] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
[    0.228312] ACPI: PCI Interrupt Link [APCG] enabled at IRQ 22
[    0.308299] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21
[    0.308422] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.308428] PCI: CLS 32 bytes, default 64
[    0.308508] Unpacking initramfs...
[    0.883416] Freeing initrd memory: 17284K
[    0.883989] audit: initializing netlink subsys (disabled)
[    0.884507] audit: type=2000 audit(1509912827.884:1): state=initialized audit_enabled=0 res=1
[    0.884534] workingset: timestamp_bits=14 max_order=20 bucket_order=6
[    0.884555] zbud: loaded
[    2.719220] tsc: Refined TSC clocksource calibration: 1808.802 MHz
[    2.719229] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1a12a47f6d7, max_idle_ns: 440795210785 ns
[    2.720122] Key type asymmetric registered
[    2.720123] Asymmetric key parser 'x509' registered
[    2.720142] bounce: pool size: 64 pages
[    2.720161] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    2.720204] io scheduler noop registered
[    2.720205] io scheduler deadline registered
[    2.720223] io scheduler cfq registered (default)
[    2.720224] io scheduler mq-deadline registered
[    2.720410] ACPI: ACPI: processor limited to max C-state 1
[    2.720521] GHES: HEST is not enabled!
[    2.720565] isapnp: Scanning for PnP cards...
[    3.074108] isapnp: No Plug & Play device found
[    3.074213] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    3.094608] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    3.095057] Linux agpgart interface v0.103
[    3.095108] agpgart-amd64 0000:00:00.0: AGP bridge [10de/00e1]
[    3.095115] agpgart-amd64 0000:00:00.0: aperture size 4096 MB is not right, using settings from NB
[    3.095120] agpgart-amd64 0000:00:00.0: setting up Nforce3 AGP
[    3.099335] agpgart-amd64 0000:00:00.0: AGP aperture is 128M @ 0xe0000000
[    3.099657] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    3.102143] serio: i8042 KBD port at 0x60,0x64 irq 1
[    3.102151] serio: i8042 AUX port at 0x60,0x64 irq 12
[    3.102339] mousedev: PS/2 mouse device common for all mice
[    3.102403] rtc_cmos 00:03: RTC can wake from S4
[    3.102535] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    3.102557] rtc_cmos 00:03: alarms up to one year, y3k, 242 bytes nvram
[    3.102579] ledtrig-cpu: registered to indicate activity on CPUs
[    3.103095] NET: Registered protocol family 10
[    3.103403] Segment Routing with IPv6
[    3.103421] mip6: Mobile IPv6
[    3.103423] NET: Registered protocol family 17
[    3.103428] mpls_gso: MPLS GSO support
[    3.103549] microcode: AMD CPU family 0xf not supported
[    3.103553] Using IPI No-Shortcut mode
[    3.103561] sched_clock: Marking stable (3101489128, 0)->(3203454251, -101965123)
[    3.103733] registered taskstats version 1
[    3.103752] zswap: loaded using pool lzo/zbud
[    3.103804] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    3.104136] rtc_cmos 00:03: setting system clock to 2017-11-05 20:13:50 UTC (1509912830)
[    3.104182] PM: Hibernation image not present or could not be loaded.
[    3.105843] Freeing unused kernel memory: 800K
[    3.105927] Write protecting the kernel text: 5960k
[    3.105989] Write protecting the kernel read-only data: 1872k
[    3.105990] NX-protecting the kernel data: 4280k
[    3.106200] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    3.124310] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    3.198168] Floppy drive(s): fd0 is 1.44M
[    3.221216] FDC 0 is a post-1991 82077
[    3.233655] i2c i2c-0: nForce2 SMBus adapter at 0x4c00
[    3.233692] i2c i2c-1: nForce2 SMBus adapter at 0x4c40
[    3.237064] ACPI: bus type USB registered
[    3.237107] usbcore: registered new interface driver usbfs
[    3.237127] usbcore: registered new interface driver hub
[    3.241813] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[    3.242134] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 20
[    3.243156] usbcore: registered new device driver usb
[    3.244505] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.244816] ehci-pci: EHCI PCI platform driver
[    3.245345] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    3.248691] SCSI subsystem initialized
[    3.264275] libata version 3.00 loaded.
[    3.744093] clocksource: Switched to clocksource tsc
[    3.796569] forcedeth 0000:00:05.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:11:09:8d:51:51
[    3.796573] forcedeth 0000:00:05.0: csum timirq gbit lnktim desc-v2
[    3.797287] ehci-pci 0000:00:02.2: EHCI Host Controller
[    3.797298] ehci-pci 0000:00:02.2: new USB bus registered, assigned bus number 1
[    3.797311] ehci-pci 0000:00:02.2: debug port 1
[    3.797347] ehci-pci 0000:00:02.2: cache line size of 32 is not supported
[    3.797366] ehci-pci 0000:00:02.2: irq 21, io mem 0xea000000
[    3.798341] forcedeth 0000:00:05.0 enp0s5: renamed from eth0
[    3.812021] ehci-pci 0000:00:02.2: USB 2.0 started, EHCI 1.00
[    3.812115] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    3.812118] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.812120] usb usb1: Product: EHCI Host Controller
[    3.812122] usb usb1: Manufacturer: Linux 4.13.0-0.bpo.1-686-pae ehci_hcd
[    3.812124] usb usb1: SerialNumber: 0000:00:02.2
[    3.812334] hub 1-0:1.0: USB hub found
[    3.812346] hub 1-0:1.0: 8 ports detected
[    3.813032] sata_nv 0000:00:0a.0: version 3.5
[    3.813372] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 23
[    3.814250] ohci-pci: OHCI PCI platform driver
[    3.816636] scsi host0: sata_nv
[    3.816915] scsi host1: sata_nv
[    3.816986] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xdc00 irq 23
[    3.816988] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xdc08 irq 23
[    3.817249] pata_amd 0000:00:08.0: version 0.4.1
[    3.819055] scsi host2: pata_amd
[    3.819297] scsi host3: pata_amd
[    3.819361] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[    3.819362] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[    3.819745] ohci-pci 0000:00:02.0: OHCI PCI host controller
[    3.819758] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
[    3.819790] ohci-pci 0000:00:02.0: irq 23, io mem 0xea004000
[    3.878071] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    3.878073] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.878075] usb usb2: Product: OHCI PCI host controller
[    3.878077] usb usb2: Manufacturer: Linux 4.13.0-0.bpo.1-686-pae ohci_hcd
[    3.878079] usb usb2: SerialNumber: 0000:00:02.0
[    3.878549] hub 2-0:1.0: USB hub found
[    3.878561] hub 2-0:1.0: 4 ports detected
[    3.878902] ohci-pci 0000:00:02.1: OHCI PCI host controller
[    3.878910] ohci-pci 0000:00:02.1: new USB bus registered, assigned bus number 3
[    3.878955] ohci-pci 0000:00:02.1: irq 22, io mem 0xea005000
[    3.938038] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    3.938041] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.938043] usb usb3: Product: OHCI PCI host controller
[    3.938044] usb usb3: Manufacturer: Linux 4.13.0-0.bpo.1-686-pae ohci_hcd
[    3.938046] usb usb3: SerialNumber: 0000:00:02.1
[    3.938483] hub 3-0:1.0: USB hub found
[    3.938493] hub 3-0:1.0: 4 ports detected
[    3.982757] ata3.00: native sectors (39102335) is smaller than sectors (39102336)
[    3.982764] ata3.00: ATA-5: ST320413A, 3.58, max UDMA/100
[    3.982766] ata3.00: 39102336 sectors, multi 16: LBA 
[    3.982776] ata3: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc600c000) ACPI=0x3f01f (20:600:0x13)
[    3.985348] ata3.00: configured for UDMA/100
[    4.140011] usb 1-8: new high-speed USB device number 2 using ehci-pci
[    4.239246] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input2
[    4.288027] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    4.289128] usb 1-8: New USB device found, idVendor=2357, idProduct=0108
[    4.289131] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    4.289132] usb 1-8: Product: 802.11n NIC 
[    4.289134] usb 1-8: Manufacturer: Realtek 
[    4.289136] usb 1-8: SerialNumber: 00e04c000001
[    4.320016] ata1.00: ATA-7: ST3808110AS, 2AAA, max UDMA/133
[    4.320020] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    4.394972] ata1.00: configured for UDMA/133
[    4.395167] scsi 0:0:0:0: Direct-Access     ATA      ST3808110AS      2AAA PQ: 0 ANSI: 5
[    4.864028] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    4.874225] ata2.00: ATA-8: WDC WD5000AAKX-001CA0, 15.01H15, max UDMA/133
[    4.874227] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    4.878802] ata2.00: configured for UDMA/133
[    4.878932] scsi 1:0:0:0: Direct-Access     ATA      WDC WD5000AAKX-0 1H15 PQ: 0 ANSI: 5
[    4.879474] scsi 2:0:0:0: Direct-Access     ATA      ST320413A        3.58 PQ: 0 ANSI: 5
[    5.060335] ata4.00: ATAPI: TOSHIBA ODD-DVD SD-R1512, 1010, max UDMA/33
[    5.060345] ata4: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc600c000) ACPI=0x701f (60:600:0x13)
[    5.084263] ata4.00: configured for UDMA/33
[    5.090171] scsi 3:0:0:0: CD-ROM            TOSHIBA  ODD-DVD SD-R1512 1010 PQ: 0 ANSI: 5
[    5.110986] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[    5.111005] sd 0:0:0:0: [sda] Write Protect is off
[    5.111008] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    5.111033] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.112626] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    5.112642] sd 1:0:0:0: [sdb] Write Protect is off
[    5.112645] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    5.112667] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.113499] sd 2:0:0:0: [sdc] 39102336 512-byte logical blocks: (20.0 GB/18.6 GiB)
[    5.113515] sd 2:0:0:0: [sdc] Write Protect is off
[    5.113517] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    5.113538] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.127730] sr 3:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[    5.127735] cdrom: Uniform CD-ROM driver Revision: 3.20
[    5.127944] sr 3:0:0:0: Attached scsi CD-ROM sr0
[    5.142109]  sdb: sdb1 sdb2 < sdb5 >
[    5.142605] sd 1:0:0:0: [sdb] Attached SCSI disk
[    5.159972]  sdc: sdc1 sdc2 < sdc5 sdc6 >
[    5.161896] sd 2:0:0:0: [sdc] Attached SCSI disk
[    5.171227]  sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
[    5.173494] sd 0:0:0:0: [sda] Attached SCSI disk
[    6.628780] random: crng init done
[    6.822942] PM: Starting manual resume from disk
[    6.822949] PM: Hibernation image partition 8:6 present
[    6.822950] PM: Looking for hibernation image.
[    6.823199] PM: Image not found (code -22)
[    6.823200] PM: Hibernation image not present or could not be loaded.
[    7.096619] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    8.051521] ip_tables: (C) 2000-2006 Netfilter Core Team
[    8.154808] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    8.154985] systemd[1]: Detected architecture x86.
[    8.165372] systemd[1]: Set hostname to <debian>.
[    9.548710] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    9.548804] systemd[1]: Reached target Remote File Systems.
[    9.548928] systemd[1]: Listening on udev Control Socket.
[    9.549018] systemd[1]: Listening on Journal Socket.
[    9.549265] systemd[1]: Created slice User and Session Slice.
[    9.549314] systemd[1]: Listening on fsck to fsckd communication Socket.
[    9.549376] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    9.905114] lp: driver loaded but no devices found
[   10.036710] ppdev: user-space parallel port driver
[   10.046011] parport_pc 00:06: reported by Plug and Play ACPI
[   10.046102] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[   10.130230] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   10.144178] lp0: using parport0 (interrupt-driven).
[   11.322053] ACPI Exception: AE_NOT_FOUND, Evaluating _PSS (20170531/processor_perflib-330)                                                               
[   11.385204] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[   11.385223] ACPI: Power Button [PWRB]
[   11.385331] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[   11.385356] ACPI: Power Button [PWRF]
[   11.529305] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
[   11.788534] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   11.788594] sd 1:0:0:0: Attached scsi generic sg1 type 0
[   11.788642] sd 2:0:0:0: Attached scsi generic sg2 type 0
[   11.788695] sr 3:0:0:0: Attached scsi generic sg3 type 5
[   11.880028] snd_intel8x0 0000:00:06.0: intel8x0_measure_ac97_clock: measured 58627 usecs (2872 samples)
[   11.880034] snd_intel8x0 0000:00:06.0: clocking to 47032
[   11.881723] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   11.882157] k8temp 0000:00:18.3: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[   12.080913] MCE: In-kernel MCE decoding enabled.
[   12.088530] EDAC amd64: Node 0: DRAM ECC disabled.
[   12.088534] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[   12.090300] ACPI Exception: AE_NOT_FOUND, Evaluating _PSS (20170531/processor_perflib-330)                                                               
[   12.097621] powernow_k8: [Firmware Bug]: No PSB or ACPI _PSS objects
[   12.097651] powernow_k8: Make sure that your BIOS is up to date and Cool'N'Quiet support is enabled in BIOS setup                                        
[   12.358779] input: PC Speaker as /devices/platform/pcspkr/input/input5
[   12.766800] [drm] radeon kernel modesetting enabled.
[   12.767572] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
[   12.768663] [drm] initializing kernel modesetting (RV280 0x1002:0x5961 0x174B:0x7C13 0x01).
[   12.769254] agpgart-amd64 0000:00:00.0: AGP 3.0 bridge
[   12.769265] agpgart-amd64 0000:00:00.0: putting AGP V3 device into 8x mode
[   12.769286] radeon 0000:01:00.0: putting AGP V3 device into 8x mode
[   12.769292] radeon 0000:01:00.0: GTT: 128M 0xE0000000 - 0xE7FFFFFF
[   12.769296] [drm] Generation 2 PCI interface, using max accessible memory
[   12.769301] radeon 0000:01:00.0: VRAM: 128M 0x00000000D0000000 - 0x00000000D7FFFFFF (128M used)
[   12.769310] [drm] Detected VRAM RAM=128M, BAR=128M
[   12.769311] [drm] RAM width 128bits DDR
[   12.769402] [TTM] Zone  kernel: Available graphics memory: 439722 kiB
[   12.769403] [TTM] Zone highmem: Available graphics memory: 1163662 kiB
[   12.769404] [TTM] Initializing pool allocator
[   12.769413] [TTM] Initializing DMA pool allocator
[   12.769453] [drm] radeon: 128M of VRAM memory ready
[   12.769455] [drm] radeon: 128M of GTT memory ready.
[   12.770454] radeon 0000:01:00.0: WB disabled
[   12.770464] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x00000000e0000000 and cpu addr 0xf825f000
[   12.770468] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   12.770469] [drm] Driver supports precise vblank timestamp query.
[   12.770498] [drm] radeon: irq initialized.
[   12.770517] [drm] Loading R200 Microcode
[   13.103145] usb 1-8: This Realtek USB WiFi dongle (0x2357:0x0108) is untested!
[   13.103150] usb 1-8: Please report results to Jes.Sorensen@gmail.com
[   13.279501] usb 1-8: Vendor: Realtek
[   13.279506] usb 1-8: Product: 802.11n NI
[   13.279508] usb 1-8: Serial: 
[   13.279510] usb 1-8: rtl8192eu_parse_efuse: dumping efuse (0x200 bytes):
[   13.279513] usb 1-8: 00: 29 81 00 7c 01 40 03 00
[   13.279515] usb 1-8: 08: 40 74 04 50 14 00 00 00
[   13.279516] usb 1-8: 10: 2c 2c 2b 2e 2e 2e 2b 2b
[   13.279518] usb 1-8: 18: 2c 2c 2c f2 ef ef ff ff
[   13.279520] usb 1-8: 20: ff ff ff ff ff ff ff ff
[   13.279521] usb 1-8: 28: ff ff ff ff ff ff ff ff
[   13.279523] usb 1-8: 30: ff ff ff ff ff ff ff ff
[   13.279525] usb 1-8: 38: ff ff 29 29 29 29 29 29
[   13.279527] usb 1-8: 40: 29 29 29 29 29 f2 ef ef
[   13.279528] usb 1-8: 48: ff ff ff ff ff ff ff ff
[   13.279530] usb 1-8: 50: ff ff ff ff ff ff ff ff
[   13.279532] usb 1-8: 58: ff ff ff ff ff ff ff ff
[   13.279533] usb 1-8: 60: ff ff ff ff ff ff ff ff
[   13.279535] usb 1-8: 68: ff ff ff ff ff ff ff ff
[   13.279537] usb 1-8: 70: ff ff ff ff ff ff ff ff
[   13.279538] usb 1-8: 78: ff ff ff ff ff ff ff ff
[   13.279540] usb 1-8: 80: ff ff ff ff ff ff ff ff
[   13.279542] usb 1-8: 88: ff ff ff ff ff ff ff ff
[   13.279543] usb 1-8: 90: ff ff ff ff ff ff ff ff
[   13.279545] usb 1-8: 98: ff ff ff ff ff ff ff ff
[   13.279547] usb 1-8: a0: ff ff ff ff ff ff ff ff
[   13.279549] usb 1-8: a8: ff ff ff ff ff ff ff ff
[   13.279550] usb 1-8: b0: ff ff ff ff ff ff ff ff
[   13.279552] usb 1-8: b8: a1 3e 1e 00 00 00 ff ff
[   13.279554] usb 1-8: c0: ff 01 00 10 00 00 00 ff
[   13.279555] usb 1-8: c8: 00 00 ff ff ff ff ff ff
[   13.279557] usb 1-8: d0: 57 23 08 01 e7 47 02 84
[   13.279559] usb 1-8: d8: 16 f9 16 64 06 0a 03 52
[   13.279560] usb 1-8: e0: 65 61 6c 74 65 6b 20 0e
[   13.279562] usb 1-8: e8: 03 38 30 32 2e 31 31 6e
[   13.279564] usb 1-8: f0: 20 4e 49 43 20 00 00 ff
[   13.279565] usb 1-8: f8: ff ff ff ff ff ff ff ff
[   13.279567] usb 1-8: 100: ff ff ff ff ff ff ff ff
[   13.279569] usb 1-8: 108: ff ff ff ff ff ff ff ff
[   13.279571] usb 1-8: 110: ff ff ff ff ff ff ff 0d
[   13.279572] usb 1-8: 118: 03 00 05 00 30 00 00 00
[   13.279574] usb 1-8: 120: 00 93 ff ff ff ff ff ff
[   13.279576] usb 1-8: 128: ff ff ff ff ff ff ff ff
[   13.279577] usb 1-8: 130: f6 a8 98 2d 03 92 98 00
[   13.279579] usb 1-8: 138: fc 8c 00 11 9b 44 02 0a
[   13.279581] usb 1-8: 140: ff ff ff ff ff ff ff ff
[   13.279582] usb 1-8: 148: ff ff ff ff ff ff ff ff
[   13.279584] usb 1-8: 150: ff ff ff ff ff ff ff ff
[   13.279586] usb 1-8: 158: ff ff ff ff ff ff ff ff
[   13.279587] usb 1-8: 160: ff ff ff ff ff ff ff ff
[   13.279589] usb 1-8: 168: ff ff ff ff ff ff ff ff
[   13.279591] usb 1-8: 170: ff ff ff ff ff ff ff ff
[   13.279592] usb 1-8: 178: ff ff ff ff ff ff ff ff
[   13.279594] usb 1-8: 180: ff ff ff ff ff ff ff ff
[   13.279596] usb 1-8: 188: ff ff ff ff ff ff ff ff
[   13.279597] usb 1-8: 190: ff ff ff ff ff ff ff ff
[   13.279599] usb 1-8: 198: ff ff ff ff ff ff ff ff
[   13.279601] usb 1-8: 1a0: ff ff ff ff ff ff ff ff
[   13.279602] usb 1-8: 1a8: ff ff ff ff ff ff ff ff
[   13.279604] usb 1-8: 1b0: ff ff ff ff ff ff ff ff
[   13.279606] usb 1-8: 1b8: ff ff ff ff ff ff ff ff
[   13.279607] usb 1-8: 1c0: ff ff ff ff ff ff ff ff
[   13.279609] usb 1-8: 1c8: ff ff ff ff ff ff ff ff
[   13.279611] usb 1-8: 1d0: ff ff ff ff ff ff ff ff
[   13.279612] usb 1-8: 1d8: ff ff ff ff ff ff ff ff
[   13.279614] usb 1-8: 1e0: ff ff ff ff ff ff ff ff
[   13.279616] usb 1-8: 1e8: ff ff ff ff ff ff ff ff
[   13.279618] usb 1-8: 1f0: ff ff ff ff ff ff ff ff
[   13.279619] usb 1-8: 1f8: ff ff ff ff ff ff ff ff
[   13.279623] usb 1-8: RTL8192EU rev B (SMIC) 2T2R, TX queues 3, WiFi=1, BT=0, GPS=0, HI PA=0
[   13.279625] usb 1-8: RTL8192EU MAC: 84:16:f9:16:64:06
[   13.279628] usb 1-8: rtl8xxxu: Loading firmware rtlwifi/rtl8192eu_nic.bin
[   13.516209] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/R200_cp.bin
[   13.516448] [drm] radeon: ring at 0x00000000E0001000
[   13.516471] [drm] ring test succeeded in 0 usecs
[   13.516638] [drm] ib test succeeded in 0 usecs
[   13.517532] [drm] Radeon Display Connectors
[   13.517533] [drm] Connector 0:
[   13.517534] [drm]   VGA-1
[   13.517536] [drm]   DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[   13.517537] [drm]   Encoders:
[   13.517538] [drm]     CRT1: INTERNAL_DAC1
[   13.517539] [drm] Connector 1:
[   13.517539] [drm]   DVI-I-1
[   13.517540] [drm]   HPD1
[   13.517541] [drm]   DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[   13.517542] [drm]   Encoders:
[   13.517543] [drm]     CRT2: INTERNAL_DAC2
[   13.517543] [drm]     DFP1: INTERNAL_TMDS1
[   13.517544] [drm] Connector 2:
[   13.517544] [drm]   SVIDEO-1
[   13.517545] [drm]   Encoders:
[   13.517546] [drm]     TV1: INTERNAL_DAC2
[   13.554618] usb 1-8: firmware: direct-loading firmware rtlwifi/rtl8192eu_nic.bin
[   13.554658] usb 1-8: Firmware revision 19.0 (signature 0x92e1)
[   13.581833] [drm] fb mappable at 0xD0040000
[   13.581837] [drm] vram apper at 0xD0000000
[   13.581838] [drm] size 5242880
[   13.581838] [drm] fb depth is 24
[   13.581839] [drm]    pitch is 5120
[   13.582840] fbcon: radeondrmfb (fb0) is primary device
[   13.688808] Console: switching to colour frame buffer device 160x64
[   13.711560] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[   13.726351] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 0
[   14.167358] Adding 2357244k swap on /dev/sda6.  Priority:-1 extents:1 across:2357244k FS
[   14.684868] usb 1-8: rtl8192eu_rx_iqk_path_b: Path B RX IQK failed!
[   14.719369] usb 1-8: rtl8192eu_rx_iqk_path_b: Path B RX IQK failed!
[   14.850492] usb 1-8: rtl8192eu_rx_iqk_path_b: Path B RX IQK failed!
[   14.886117] usb 1-8: rtl8192eu_rx_iqk_path_b: Path B RX IQK failed!
[   15.614575] usbcore: registered new interface driver rtl8xxxu
[   16.034090] rtl8xxxu 1-8:1.0 wlx8416f9166406: renamed from wlan0
[   16.485155] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
[   16.531522] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[   17.147624] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[   17.207844] systemd-journald[168]: Received request to flush runtime journal from PID 1
[   24.197411] ACPI Exception: AE_NOT_FOUND, Evaluating _PSS (20170531/processor_perflib-330)                                                               
[   24.204902] powernow_k8: [Firmware Bug]: No PSB or ACPI _PSS objects
[   24.205067] powernow_k8: Make sure that your BIOS is up to date and Cool'N'Quiet support is enabled in BIOS setup                                        
[   24.217941] ACPI Exception: AE_NOT_FOUND, Evaluating _PSS (20170531/processor_perflib-330)                                                               
[   25.173674] IPv6: ADDRCONF(NETDEV_UP): enp0s5: link is not ready
[   25.174290] forcedeth 0000:00:05.0 enp0s5: no link during initialization
[   25.174595] IPv6: ADDRCONF(NETDEV_UP): enp0s5: link is not ready
[   25.218434] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[   25.234719] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[   25.334601] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[   26.763664] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[   32.399839] gnome-shell[617]: segfault at 0 ip   (null) sp bfe4f3fc error 14 in gnome-shell[44f000+3000]
[   33.247625] gnome-shell[665]: segfault at 0 ip   (null) sp bfc3e05c error 14 in gnome-shell[4fa000+3000]
[   73.028156] fuse init (API version 7.26)
[  116.931340] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[  161.168688] wlx8416f9166406: authenticate with d4:a1:48:3c:8e:58
[  161.197177] wlx8416f9166406: send auth to d4:a1:48:3c:8e:58 (try 1/3)
[  161.400021] wlx8416f9166406: send auth to d4:a1:48:3c:8e:58 (try 2/3)
[  161.604024] wlx8416f9166406: send auth to d4:a1:48:3c:8e:58 (try 3/3)
[  161.808020] wlx8416f9166406: authentication with d4:a1:48:3c:8e:58 timed out
[  163.076650] wlx8416f9166406: authenticate with d4:a1:48:3c:8e:58
[  163.105366] wlx8416f9166406: send auth to d4:a1:48:3c:8e:58 (try 1/3)
[  163.308024] wlx8416f9166406: send auth to d4:a1:48:3c:8e:58 (try 2/3)
[  163.512027] wlx8416f9166406: send auth to d4:a1:48:3c:8e:58 (try 3/3)
[  163.716026] wlx8416f9166406: authentication with d4:a1:48:3c:8e:58 timed out
[  165.384654] wlx8416f9166406: authenticate with d4:a1:48:3c:8e:58
[  165.412789] wlx8416f9166406: send auth to d4:a1:48:3c:8e:58 (try 1/3)
[  165.616039] wlx8416f9166406: send auth to d4:a1:48:3c:8e:58 (try 2/3)
[  165.820030] wlx8416f9166406: send auth to d4:a1:48:3c:8e:58 (try 3/3)
[  166.024043] wlx8416f9166406: authentication with d4:a1:48:3c:8e:58 timed out
[  168.192652] wlx8416f9166406: authenticate with d4:a1:48:3c:8e:58
[  168.220198] wlx8416f9166406: send auth to d4:a1:48:3c:8e:58 (try 1/3)
[  168.424023] wlx8416f9166406: send auth to d4:a1:48:3c:8e:58 (try 2/3)
[  168.628023] wlx8416f9166406: send auth to d4:a1:48:3c:8e:58 (try 3/3)
[  168.832027] wlx8416f9166406: authentication with d4:a1:48:3c:8e:58 timed out
[  181.160639] wlx8416f9166406: authenticate with d4:a1:48:3c:8e:58
[  181.188491] wlx8416f9166406: send auth to d4:a1:48:3c:8e:58 (try 1/3)
[  181.392026] wlx8416f9166406: send auth to d4:a1:48:3c:8e:58 (try 2/3)
[  181.596023] wlx8416f9166406: send auth to d4:a1:48:3c:8e:58 (try 3/3)
[  181.800020] wlx8416f9166406: authentication with d4:a1:48:3c:8e:58 timed out
[  185.112628] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[  185.218753] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[  284.673493] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[  310.013773] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[  310.288424] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[  356.610196] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[  357.960648] wlx8416f9166406: authenticate with d4:a1:48:3c:8e:58
[  357.987522] wlx8416f9166406: send auth to d4:a1:48:3c:8e:58 (try 1/3)
[  358.188026] wlx8416f9166406: send auth to d4:a1:48:3c:8e:58 (try 2/3)
[  358.392040] wlx8416f9166406: send auth to d4:a1:48:3c:8e:58 (try 3/3)
[  358.596025] wlx8416f9166406: authentication with d4:a1:48:3c:8e:58 timed out
[  369.764679] wlx8416f9166406: authenticate with d4:a1:48:3c:8e:58
[  369.791491] wlx8416f9166406: send auth to d4:a1:48:3c:8e:58 (try 1/3)
[  369.992037] wlx8416f9166406: send auth to d4:a1:48:3c:8e:58 (try 2/3)
[  370.196030] wlx8416f9166406: send auth to d4:a1:48:3c:8e:58 (try 3/3)
[  370.400024] wlx8416f9166406: authentication with d4:a1:48:3c:8e:58 timed out
[  382.012523] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[  382.253221] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[  612.755244] forcedeth 0000:00:05.0 enp0s5: link up
[  612.755568] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s5: link becomes ready
[  624.609020] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[  625.985149] wlx8416f9166406: authenticate with a0:1b:29:39:21:1a
[  626.025334] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 1/3)
[  626.228789] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 2/3)
[  626.433497] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 3/3)
[  626.637489] wlx8416f9166406: authentication with a0:1b:29:39:21:1a timed out
[  637.859135] wlx8416f9166406: authenticate with a0:1b:29:39:21:1a
[  637.889046] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 1/3)
[  638.090629] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 2/3)
[  638.294785] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 3/3)
[  638.498946] wlx8416f9166406: authentication with a0:1b:29:39:21:1a timed out
[  643.242685] forcedeth 0000:00:05.0 enp0s5: link down
[  650.038042] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[  650.290451] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[  664.499356] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[  665.837179] wlx8416f9166406: authenticate with a0:1b:29:39:21:1a
[  665.862700] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 1/3)
[  666.064622] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 2/3)
[  666.268652] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 3/3)
[  666.472679] wlx8416f9166406: authentication with a0:1b:29:39:21:1a timed out
[  677.658288] wlx8416f9166406: authenticate with a0:1b:29:39:21:1a
[  677.684327] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 1/3)
[  677.885673] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 2/3)
[  678.089683] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 3/3)
[  678.293693] wlx8416f9166406: authentication with a0:1b:29:39:21:1a timed out
[  690.043747] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[  690.286431] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[  704.907038] forcedeth 0000:00:05.0 enp0s5: link up
[ 1033.283890] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[ 1348.363455] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[ 1664.393519] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[ 1980.413666] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[ 2281.834365] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[ 2289.445739] wlx8416f9166406: authenticate with a0:1b:29:39:21:1a
[ 2289.473832] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 1/3)
[ 2289.676999] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 2/3)
[ 2289.881028] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 3/3)
[ 2290.085020] wlx8416f9166406: authentication with a0:1b:29:39:21:1a timed out
[ 2301.274716] wlx8416f9166406: authenticate with a0:1b:29:39:21:1a
[ 2301.307459] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 1/3)
[ 2301.509536] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 2/3)
[ 2301.713562] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 3/3)
[ 2301.917584] wlx8416f9166406: authentication with a0:1b:29:39:21:1a timed out
[ 2307.142569] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[ 2307.394711] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[ 2467.840665] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[ 2469.137587] wlx8416f9166406: authenticate with a0:1b:29:39:21:1a
[ 2469.167240] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 1/3)
[ 2469.368990] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 2/3)
[ 2469.572958] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 3/3)
[ 2469.776961] wlx8416f9166406: authentication with a0:1b:29:39:21:1a timed out
[ 2480.946070] wlx8416f9166406: authenticate with a0:1b:29:39:21:1a
[ 2480.972843] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 1/3)
[ 2481.173476] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 2/3)
[ 2481.377463] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 3/3)
[ 2481.581469] wlx8416f9166406: authentication with a0:1b:29:39:21:1a timed out
[ 2493.146699] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[ 2493.383839] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[ 2535.758125] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[ 2537.248575] wlx8416f9166406: authenticate with a0:1b:29:39:21:1a
[ 2537.277472] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 1/3)
[ 2537.479919] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 2/3)
[ 2537.683949] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 3/3)
[ 2537.887945] wlx8416f9166406: authentication with a0:1b:29:39:21:1a timed out
[ 2549.090279] wlx8416f9166406: authenticate with a0:1b:29:39:21:1a
[ 2549.118054] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 1/3)
[ 2549.320439] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 2/3)
[ 2549.524465] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 3/3)
[ 2549.728424] wlx8416f9166406: authentication with a0:1b:29:39:21:1a timed out
[ 2561.159989] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[ 2561.396663] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[ 2597.911154] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[ 2599.247141] wlx8416f9166406: authenticate with a0:1b:29:39:21:1a
[ 2599.272483] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 1/3)
[ 2599.474583] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 2/3)
[ 2599.678568] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 3/3)
[ 2599.882605] wlx8416f9166406: authentication with a0:1b:29:39:21:1a timed out
[ 2611.063794] wlx8416f9166406: authenticate with a0:1b:29:39:21:1a
[ 2611.091105] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 1/3)
[ 2611.295069] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 2/3)
[ 2611.499075] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 3/3)
[ 2611.703075] wlx8416f9166406: authentication with a0:1b:29:39:21:1a timed out
[ 2623.153976] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[ 2623.412114] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[ 2631.593900] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[ 2632.928578] wlx8416f9166406: authenticate with a0:1b:29:39:21:1a
[ 2632.954101] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 1/3)
[ 2633.156002] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 2/3)
[ 2633.360005] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 3/3)
[ 2633.565093] wlx8416f9166406: authentication with a0:1b:29:39:21:1a timed out
[ 2644.741207] wlx8416f9166406: authenticate with a0:1b:29:39:21:1a
[ 2644.767483] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 1/3)
[ 2644.968539] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 2/3)
[ 2645.172523] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 3/3)
[ 2645.376515] wlx8416f9166406: authentication with a0:1b:29:39:21:1a timed out
[ 2657.157741] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[ 2657.425303] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[ 2698.231469] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[ 2699.671447] wlx8416f9166406: authenticate with a0:1b:29:39:21:1a
[ 2699.701052] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 1/3)
[ 2699.902887] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 2/3)
[ 2700.106939] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 3/3)
[ 2700.310857] wlx8416f9166406: authentication with a0:1b:29:39:21:1a timed out
[ 2711.500053] wlx8416f9166406: authenticate with a0:1b:29:39:21:1a
[ 2711.528711] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 1/3)
[ 2711.731426] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 2/3)
[ 2711.935362] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 3/3)
[ 2712.139377] wlx8416f9166406: authentication with a0:1b:29:39:21:1a timed out
[ 2724.163718] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[ 2724.409498] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[ 2733.560299] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[ 2734.912939] wlx8416f9166406: authenticate with a0:1b:29:39:21:1a
[ 2734.938602] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 1/3)
[ 2735.140353] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 2/3)
[ 2735.344363] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 3/3)
[ 2735.548368] wlx8416f9166406: authentication with a0:1b:29:39:21:1a timed out
[ 2746.725453] wlx8416f9166406: authenticate with a0:1b:29:39:21:1a
[ 2746.751452] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 1/3)
[ 2746.952834] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 2/3)
[ 2747.156844] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 3/3)
[ 2747.360850] wlx8416f9166406: authentication with a0:1b:29:39:21:1a timed out
[ 2759.161512] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[ 2759.404927] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[ 2765.593126] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[ 2765.796518] wlx8416f9166406: authenticate with a0:1b:29:39:21:1a
[ 2765.813713] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 1/3)
[ 2766.017706] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 2/3)
[ 2766.221659] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 3/3)
[ 2766.425680] wlx8416f9166406: authentication with a0:1b:29:39:21:1a timed out
[ 2777.602824] wlx8416f9166406: authenticate with a0:1b:29:39:21:1a
[ 2777.629939] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 1/3)
[ 2777.830145] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 2/3)
[ 2778.034154] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 3/3)
[ 2778.238160] wlx8416f9166406: authentication with a0:1b:29:39:21:1a timed out
[ 2791.160609] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[ 2791.390020] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[ 2891.352591] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[ 2892.707667] wlx8416f9166406: authenticate with a0:1b:29:39:21:1a
[ 2892.734415] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 1/3)
[ 2892.935002] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 2/3)
[ 2893.139014] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 3/3)
[ 2893.343012] wlx8416f9166406: authentication with a0:1b:29:39:21:1a timed out
[ 2904.528188] wlx8416f9166406: authenticate with a0:1b:29:39:21:1a
[ 2904.558411] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 1/3)
[ 2904.759496] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 2/3)
[ 2904.963507] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 3/3)
[ 2905.167560] wlx8416f9166406: authentication with a0:1b:29:39:21:1a timed out
[ 2917.165308] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[ 2917.420027] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[ 2974.251608] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[ 2975.615117] wlx8416f9166406: authenticate with a0:1b:29:39:21:1a
[ 2975.641699] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 1/3)
[ 2975.842506] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 2/3)
[ 2976.046531] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 3/3)
[ 2976.250532] wlx8416f9166406: authentication with a0:1b:29:39:21:1a timed out
[ 2987.427607] wlx8416f9166406: authenticate with a0:1b:29:39:21:1a
[ 2987.457340] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 1/3)
[ 2987.659013] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 2/3)
[ 2987.863026] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 3/3)
[ 2988.067019] wlx8416f9166406: authentication with a0:1b:29:39:21:1a timed out
[ 3000.175026] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[ 3000.408616] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[ 3007.753695] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[ 3009.216476] wlx8416f9166406: authenticate with a0:1b:29:39:21:1a
[ 3009.241770] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 1/3)
[ 3009.443896] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 2/3)
[ 3009.647903] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 3/3)
[ 3009.851911] wlx8416f9166406: authentication with a0:1b:29:39:21:1a timed out
[ 3021.021007] wlx8416f9166406: authenticate with a0:1b:29:39:21:1a
[ 3021.046744] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 1/3)
[ 3021.248391] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 2/3)
[ 3021.452398] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 3/3)
[ 3021.656405] wlx8416f9166406: authentication with a0:1b:29:39:21:1a timed out
[ 3033.171112] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[ 3033.404556] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[ 3118.149721] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[ 3119.461143] wlx8416f9166406: authenticate with a0:1b:29:39:21:1a
[ 3119.488815] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 1/3)
[ 3119.692523] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 2/3)
[ 3119.896570] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 3/3)
[ 3120.100993] wlx8416f9166406: authentication with a0:1b:29:39:21:1a timed out
[ 3131.273653] wlx8416f9166406: authenticate with a0:1b:29:39:21:1a
[ 3131.299435] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 1/3)
[ 3131.501043] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 2/3)
[ 3131.705096] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 3/3)
[ 3131.909067] wlx8416f9166406: authentication with a0:1b:29:39:21:1a timed out
[ 3143.171053] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[ 3143.409829] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[ 3147.947281] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[ 3148.110326] wlx8416f9166406: authenticate with a0:1b:29:39:21:1a
[ 3148.122255] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 1/3)
[ 3148.325749] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 2/3)
[ 3148.529725] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 3/3)
[ 3148.733765] wlx8416f9166406: authentication with a0:1b:29:39:21:1a timed out
[ 3155.005613] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[ 3155.121960] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[ 3155.316576] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[ 3156.643322] wlx8416f9166406: authenticate with a0:1b:29:39:21:1a
[ 3156.671929] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 1/3)
[ 3156.874093] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 2/3)
[ 3157.078085] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 3/3)
[ 3157.282174] wlx8416f9166406: authentication with a0:1b:29:39:21:1a timed out
[ 3168.463221] wlx8416f9166406: authenticate with a0:1b:29:39:21:1a
[ 3168.490964] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 1/3)
[ 3168.694584] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 2/3)
[ 3168.898599] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 3/3)
[ 3169.102603] wlx8416f9166406: authentication with a0:1b:29:39:21:1a timed out
[ 3181.182902] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[ 3181.432089] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[ 3210.194684] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[ 3210.359699] wlx8416f9166406: authenticate with a0:1b:29:39:21:1a
[ 3210.374149] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 1/3)
[ 3210.576357] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 2/3)
[ 3210.780362] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 3/3)
[ 3210.984798] wlx8416f9166406: authentication with a0:1b:29:39:21:1a timed out
[ 3222.153437] wlx8416f9166406: authenticate with a0:1b:29:39:21:1a
[ 3222.179016] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 1/3)
[ 3222.381164] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 2/3)
[ 3222.584861] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 3/3)
[ 3222.788840] wlx8416f9166406: authentication with a0:1b:29:39:21:1a timed out
[ 3235.181277] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[ 3235.417228] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[ 3409.047619] IPv6: ADDRCONF(NETDEV_UP): enp0s5: link is not ready
[ 3409.063330] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[ 3409.082556] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[ 3409.207814] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[ 3409.443987] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[ 3421.574935] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[ 3423.065852] wlx8416f9166406: authenticate with a0:1b:29:39:21:1a
[ 3423.091385] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 1/3)
[ 3423.293220] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 2/3)
[ 3423.497228] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 3/3)
[ 3423.701271] wlx8416f9166406: authentication with a0:1b:29:39:21:1a timed out
[ 3424.969889] wlx8416f9166406: authenticate with a0:1b:29:39:21:1a
[ 3424.995610] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 1/3)
[ 3425.197299] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 2/3)
[ 3425.401307] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 3/3)
[ 3425.605313] wlx8416f9166406: authentication with a0:1b:29:39:21:1a timed out
[ 3427.274057] wlx8416f9166406: authenticate with a0:1b:29:39:21:1a
[ 3427.301586] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 1/3)
[ 3427.505438] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 2/3)
[ 3427.709410] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 3/3)
[ 3427.913426] wlx8416f9166406: authentication with a0:1b:29:39:21:1a timed out
[ 3430.082099] wlx8416f9166406: authenticate with a0:1b:29:39:21:1a
[ 3430.108051] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 1/3)
[ 3430.309516] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 2/3)
[ 3430.513526] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 3/3)
[ 3430.717532] wlx8416f9166406: authentication with a0:1b:29:39:21:1a timed out
[ 3443.050657] wlx8416f9166406: authenticate with a0:1b:29:39:21:1a
[ 3443.077630] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 1/3)
[ 3443.278074] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 2/3)
[ 3443.482065] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 3/3)
[ 3443.686074] wlx8416f9166406: authentication with a0:1b:29:39:21:1a timed out
[ 3447.187562] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[ 3447.421089] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[ 3487.324567] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[ 3488.816609] wlx8416f9166406: authenticate with a0:1b:29:39:21:1a
[ 3488.845518] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 1/3)
[ 3489.047995] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 2/3)
[ 3489.251982] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 3/3)
[ 3489.455992] wlx8416f9166406: authentication with a0:1b:29:39:21:1a timed out
[ 3500.625081] wlx8416f9166406: authenticate with a0:1b:29:39:21:1a
[ 3500.651262] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 1/3)
[ 3500.852461] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 2/3)
[ 3501.056469] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 3/3)
[ 3501.260477] wlx8416f9166406: authentication with a0:1b:29:39:21:1a timed out
[ 3513.190349] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[ 3513.426114] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[ 3805.284996] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[ 3806.729907] wlx8416f9166406: authenticate with a0:1b:29:39:21:1a
[ 3806.761207] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 1/3)
[ 3806.965260] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 2/3)
[ 3807.169266] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 3/3)
[ 3807.373294] wlx8416f9166406: authentication with a0:1b:29:39:21:1a timed out
[ 3818.554352] wlx8416f9166406: authenticate with a0:1b:29:39:21:1a
[ 3818.580199] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 1/3)
[ 3818.781741] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 2/3)
[ 3818.985749] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 3/3)
[ 3819.189765] wlx8416f9166406: authentication with a0:1b:29:39:21:1a timed out
[ 3831.282813] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[ 3831.514548] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[ 3855.396978] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[ 3856.811929] wlx8416f9166406: authenticate with a0:1b:29:39:21:1a
[ 3856.842178] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 1/3)
[ 3857.043403] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 2/3)
[ 3857.247375] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 3/3)
[ 3857.451356] wlx8416f9166406: authentication with a0:1b:29:39:21:1a timed out
[ 3868.624456] wlx8416f9166406: authenticate with a0:1b:29:39:21:1a
[ 3868.650524] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 1/3)
[ 3868.851829] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 2/3)
[ 3869.055840] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 3/3)
[ 3869.259847] wlx8416f9166406: authentication with a0:1b:29:39:21:1a timed out
[ 3881.205893] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[ 3881.438998] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[ 4224.496551] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[ 4434.107522] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[ 4435.532091] wlx8416f9166406: authenticate with a0:1b:29:39:21:1a
[ 4435.559349] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 1/3)
[ 4435.759508] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 2/3)
[ 4435.963514] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 3/3)
[ 4436.167521] wlx8416f9166406: authentication with a0:1b:29:39:21:1a timed out
[ 4447.340617] wlx8416f9166406: authenticate with a0:1b:29:39:21:1a
[ 4447.367566] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 1/3)
[ 4447.568001] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 2/3)
[ 4447.772007] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 3/3)
[ 4447.976016] wlx8416f9166406: authentication with a0:1b:29:39:21:1a timed out
[ 4459.228946] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[ 4459.472925] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[ 4802.502087] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[ 5118.534392] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[ 5434.487950] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[ 5749.505143] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[ 6064.518297] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[ 6379.585267] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready

Offline

 

#34  2017-11-06 12:08:37

  yossarian - Szczawiożerca

yossarian
Szczawiożerca
Skąd: Shangri-La
Zarejestrowany: 2011-04-25

Re: Instalacja karty wifi usb tp-link wn822n

Są jakieś zmiany gdy odłączysz i podłączysz ponownie tę kartę?

No i nie napisałeś w jaki sposób się łączysz z siecią.
W twoim interesie jest podawać wszystkie istotne informacje…

Offline

 

#35  2017-11-06 14:17:37

  antonion - Użytkownik

antonion
Użytkownik
Zarejestrowany: 2017-11-05

Re: Instalacja karty wifi usb tp-link wn822n

Łączę się przez managera połączenia. Tam pojawia się sieć, którą wykrywa zgodnie z SSID, wprowadzam klucz zabezpieczeń, adres z DHCP. Wszystko wygląda poprawnie. Przez chwilę nawiązuje połączenie i zaraz rozłącza. Typ zabezpieczeń, wszystko prawidłowo wprowadzone.

Offline

 

#36  2017-11-06 14:37:52

  urbinek - Dzban Naczelny

urbinek
Dzban Naczelny
Skąd: Sosnowiec
Zarejestrowany: 2009-10-01
Serwis

Re: Instalacja karty wifi usb tp-link wn822n

Według logu autoryzacja nie działa poprawnie:

Kod:

[ 4435.532091] wlx8416f9166406: authenticate with a0:1b:29:39:21:1a
[ 4435.559349] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 1/3)
[ 4435.759508] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 2/3)
[ 4435.963514] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 3/3)
[ 4436.167521] wlx8416f9166406: authentication with a0:1b:29:39:21:1a timed out
[ 4447.340617] wlx8416f9166406: authenticate with a0:1b:29:39:21:1a
[ 4447.367566] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 1/3)
[ 4447.568001] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 2/3)
[ 4447.772007] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 3/3)
[ 4447.976016] wlx8416f9166406: authentication with a0:1b:29:39:21:1a timed out

Najczęściej złe hasło albo nie kompatybilne szyfrowanie

Tymczasowo wyłącz na routerze szyfrowanie i zobacz czy możesz się podłączyć bez hasła


A w wolnym czasie, robię noże :)
http://nginx.urbinek.eu/_photos/signature.png

Offline

 

#37  2017-11-06 17:22:18

  arecki - Użytkownik

arecki
Użytkownik
Skąd: 44 Bronson Lane Hensonville
Zarejestrowany: 2016-03-03

Re: Instalacja karty wifi usb tp-link wn822n

Co zapewne wynika z

Kod:

[   14.684868] usb 1-8: rtl8192eu_rx_iqk_path_b: Path B RX IQK failed!
[   14.719369] usb 1-8: rtl8192eu_rx_iqk_path_b: Path B RX IQK failed!
[   14.850492] usb 1-8: rtl8192eu_rx_iqk_path_b: Path B RX IQK failed!
[   14.886117] usb 1-8: rtl8192eu_rx_iqk_path_b: Path B RX IQK failed!

Co to za model karty?
Może producent udostępnia własny sterownik.

Offline

 

#38  2017-11-06 18:19:38

  morfik - Cenzor wirtualnego świata

morfik
Cenzor wirtualnego świata
Skąd: ze WSI
Zarejestrowany: 2011-09-15
Serwis

Re: Instalacja karty wifi usb tp-link wn822n

urbinek napisał(-a):

Według logu autoryzacja nie działa poprawnie

On się nie może uwierzytelnić, a nie "autoryzować". Na niebezpieczniku cie nie zatrudnią, bo tam wymagają rozróżnienia tych dwóch pojęć. xD

Tak wygląda prawidłowe uwierzytelnienie i powiązanie z AP (log z AP):

Kod:

Nov  6 18:12:37 the-redviper hostapd: wlan0: STA 40:3f:8c:19:c0:59 IEEE 802.11: authenticated
Nov  6 18:12:37 the-redviper hostapd: wlan0: STA 40:3f:8c:19:c0:59 IEEE 802.11: associated (aid 1)
Nov  6 18:12:37 the-redviper hostapd: wlan0: AP-STA-CONNECTED 40:3f:8c:19:c0:59
Nov  6 18:12:37 the-redviper hostapd: wlan0: STA 40:3f:8c:19:c0:59 WPA: pairwise key handshake completed (RSN)
Nov  6 18:12:37 the-redviper dnsmasq-dhcp[2096]: DHCPDISCOVER(br-lan) 40:3f:8c:19:c0:59
Nov  6 18:12:37 the-redviper dnsmasq-dhcp[2096]: DHCPOFFER(br-lan) 192.168.1.181 40:3f:8c:19:c0:59
Nov  6 18:12:37 the-redviper dnsmasq-dhcp[2096]: DHCPREQUEST(br-lan) 192.168.1.181 40:3f:8c:19:c0:59
Nov  6 18:12:37 the-redviper dnsmasq-dhcp[2096]: DHCPACK(br-lan) 192.168.1.181 40:3f:8c:19:c0:59 morfik-neffos-x1-max
Nov  6 18:12:38 the-redviper odhcpd[823]: Using a RA lifetime of 0 seconds on br-lan

Jak się poda złe hasło to log wygląda tak:

Kod:

Nov  6 18:15:37 the-redviper hostapd: wlan1: STA 40:3f:8c:19:c0:59 IEEE 802.11: authenticated
Nov  6 18:15:37 the-redviper hostapd: wlan1: STA 40:3f:8c:19:c0:59 IEEE 802.11: associated (aid 3)
Nov  6 18:15:37 the-redviper hostapd: wlan1: AP-STA-POSSIBLE-PSK-MISMATCH 40:3f:8c:19:c0:59
Nov  6 18:15:38 the-redviper hostapd: wlan1: AP-STA-POSSIBLE-PSK-MISMATCH 40:3f:8c:19:c0:59
Nov  6 18:15:39 the-redviper hostapd: wlan1: AP-STA-POSSIBLE-PSK-MISMATCH 40:3f:8c:19:c0:59
Nov  6 18:15:40 the-redviper hostapd: wlan1: AP-STA-POSSIBLE-PSK-MISMATCH 40:3f:8c:19:c0:59

I tu masz info, że PSK-MISMATCH, czyli niepoprawne hasło.

Offline

 

#39  2017-11-06 19:17:06

  antonion - Użytkownik

antonion
Użytkownik
Zarejestrowany: 2017-11-05

Re: Instalacja karty wifi usb tp-link wn822n

Model karty: TP-link wn822n v.4 (usb). Jest sterownik producenta pod linuxa. Miałem ściągnięty ale koledzy poradzili żeby lepiej z niego nie korzystać. Dzięki za wszelką pomoc i zainteresowanie.

Offline

 

#40  2017-11-06 19:17:48

  arecki - Użytkownik

arecki
Użytkownik
Skąd: 44 Bronson Lane Hensonville
Zarejestrowany: 2016-03-03

Re: Instalacja karty wifi usb tp-link wn822n

Wklej linka do tego sterownika, bo z tego co znajduję na stronie są tylko do starszych kerneli.

Support linux(kernel 2.6.18 ~ 3.10.10)

Ostatnio edytowany przez arecki (2017-11-06 19:22:07)

Offline

 

#41  2017-11-06 19:22:55

  antonion - Użytkownik

antonion
Użytkownik
Zarejestrowany: 2017-11-05

Re: Instalacja karty wifi usb tp-link wn822n

Offline

 

#42  2017-11-06 19:24:02

  arecki - Użytkownik

arecki
Użytkownik
Skąd: 44 Bronson Lane Hensonville
Zarejestrowany: 2016-03-03

Re: Instalacja karty wifi usb tp-link wn822n

To jest to samo co znalazłem.

Offline

 

#43  2017-11-06 19:42:09

  ilin - Palacz

ilin
Palacz
Skąd: PRLu
Zarejestrowany: 2006-05-03

Re: Instalacja karty wifi usb tp-link wn822n

Próbowałeś się podłączyć do tej sieci po zdjęciu szyfrowania ?


Problemy rozwiązujemy na forum nie na PW -> Niech inni na tym skorzystają.
Polski portal Debiana

Offline

 

#44  2017-11-06 19:49:14

  arecki - Użytkownik

arecki
Użytkownik
Skąd: 44 Bronson Lane Hensonville
Zarejestrowany: 2016-03-03

Re: Instalacja karty wifi usb tp-link wn822n

Wujek google podpowiada aby zbudować sterownik RTL8192EU z gita https://github.com/jeremyb31/rtl8192eu-linux-driver
Zapewne trzeba będzie jeszcze obecny dodać do blacklist.

Offline

 

#45  2017-11-06 19:53:15

  ilin - Palacz

ilin
Palacz
Skąd: PRLu
Zarejestrowany: 2006-05-03

Re: Instalacja karty wifi usb tp-link wn822n

Ostatnia zmiana była 4 mce temu.
Niech najpierw spróbuje bez szyfrowania.
Miałem przypadek karty gdzie NM nie chciał sie z szyfrowaniem połączyć.


Problemy rozwiązujemy na forum nie na PW -> Niech inni na tym skorzystają.
Polski portal Debiana

Offline

 

#46  2017-11-06 20:39:14

  antonion - Użytkownik

antonion
Użytkownik
Zarejestrowany: 2017-11-05

Re: Instalacja karty wifi usb tp-link wn822n

Próbowałem bez szyfrowania. Nic nie pomogło.

Offline

 

#47  2017-11-06 20:43:48

  ilin - Palacz

ilin
Palacz
Skąd: PRLu
Zarejestrowany: 2006-05-03

Re: Instalacja karty wifi usb tp-link wn822n

Pokaż

Kod:

iwlist wlx8416f9166406 scan

Oraz

Kod:

dmesg

przy próbie połączenia bez szyfrowania.


Problemy rozwiązujemy na forum nie na PW -> Niech inni na tym skorzystają.
Polski portal Debiana

Offline

 

#48  2017-11-06 21:15:24

  morfik - Cenzor wirtualnego świata

morfik
Cenzor wirtualnego świata
Skąd: ze WSI
Zarejestrowany: 2011-09-15
Serwis

Re: Instalacja karty wifi usb tp-link wn822n

antonion napisał(-a):

Model karty: TP-link wn822n v.4 (usb). Jest sterownik producenta pod linuxa. Miałem ściągnięty ale koledzy poradzili żeby lepiej z niego nie korzystać. Dzięki za wszelką pomoc i zainteresowanie.

Te stery ze strony TP-Link to się nadają chyba tylko na wystawienie na pudełku napisu, że linux supported. TP-Link ma w zasadzie gdzieś te stery i ich nie rozwija. To są chyba jakieś stare zrzuty z gita, które były w tamtym czasie dostępne i tego syfu to ja bym w ogóle nie ruszał. xD

arecki napisał(-a):

Wujek google podpowiada aby zbudować sterownik RTL8192EU z gita https://github.com/jeremyb31/rtl8192eu-linux-driver
Zapewne trzeba będzie jeszcze obecny dodać do blacklist.

Jak już to lepiej brać ze źródła, a nie z forka (aktualniejsze):

https://github.com/Mange/rtl8192eu-linux-driver

Swojego czasu ja się bawiłem tym sterownikiem pod kątem nieco innej karty ale działał bez zarzutu: https://morfikov.github.io/post/sterowniki-tp-link-tl-wn823n-8192eu/

Info jak zbudować moduł jest na gicie i sądząc po tym info:, to ten ster powinien działać i z tą kartą.

Ostatnio edytowany przez morfik (2017-11-06 21:22:08)

Offline

 

#49  2017-11-06 21:20:53

  antonion - Użytkownik

antonion
Użytkownik
Zarejestrowany: 2017-11-05

Re: Instalacja karty wifi usb tp-link wn822n

wynik poleceń według sugestii

Kod:

root@debian:~# dmesg
[    0.000000] random: get_random_bytes called from start_kernel+0x30/0x39c with crng_init=0
[    0.000000] Linux version 4.13.0-0.bpo.1-686-pae (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18)) #1 SMP Debian 4.13.4-2~bpo9+1 (2017-10-17)
[    0.000000] x86/fpu: x87 FPU will use FXSAVE
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000008ffeffff] usable
[    0.000000] BIOS-e820: [mem 0x000000008fff0000-0x000000008fff2fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000008fff3000-0x000000008fffffff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fefffc00-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffff0000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] random: fast init done
[    0.000000] SMBIOS 2.2 present.
[    0.000000] DMI:    /MS-7030, BIOS 6.00 PG 08/26/2004
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x8fff0 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-C7FFF write-protect
[    0.000000]   C8000-FFFFF uncachable
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask FF80000000 write-back
[    0.000000]   1 base 0080000000 mask FFF0000000 write-back
[    0.000000]   2 base 00E0000000 mask FFF8000000 write-combining
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] found SMP MP-table at [mem 0x000f5740-0x000f574f] mapped at [c00f5740]
[    0.000000] initial memory mapped: [mem 0x00000000-0x1bdfffff]
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] BRK [0x1ba71000, 0x1ba71fff] PGTABLE
[    0.000000] BRK [0x1ba72000, 0x1ba73fff] PGTABLE
[    0.000000] BRK [0x1ba74000, 0x1ba74fff] PGTABLE
[    0.000000] BRK [0x1ba75000, 0x1ba75fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x35e2d000-0x36f0dfff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F7190 000014 (v00 Nvidia)
[    0.000000] ACPI: RSDT 0x000000008FFF3000 00002C (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
[    0.000000] ACPI: FACP 0x000000008FFF3040 000074 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
[    0.000000] ACPI: DSDT 0x000000008FFF30C0 004908 (v01 NVIDIA AWRDACPI 00001000 MSFT 0100000E)
[    0.000000] ACPI: FACS 0x000000008FFF0000 000040
[    0.000000] ACPI: APIC 0x000000008FFF7A00 00006E (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 1413MB HIGHMEM available.
[    0.000000] 889MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 379fe000
[    0.000000]   low ram: 0 - 379fe000
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   Normal   [mem 0x0000000001000000-0x00000000379fdfff]
[    0.000000]   HighMem  [mem 0x00000000379fe000-0x000000008ffeffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000008ffeffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000008ffeffff]
[    0.000000] On node 0 totalpages: 589710
[    0.000000] free_area_init_node: node 0, pgdat db825f80, node_mem_map f49ed024
[    0.000000]   DMA zone: 36 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   Normal zone: 1967 pages used for memmap
[    0.000000]   Normal zone: 223742 pages, LIFO batch:31
[    0.000000]   HighMem zone: 361970 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] Nvidia board detected. Ignoring ACPI timer override.
[    0.000000] If you got timer trouble try acpi_use_timer_override
[    0.000000] ACPI: PM-Timer IO Port: 0x4008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: BIOS IRQ0 override ignored.
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] e820: [mem 0x90000000-0xfebfffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] percpu: Embedded 22 pages/cpu @f79e5000 s61004 r0 d29108 u90112
[    0.000000] pcpu-alloc: s61004 r0 d29108 u90112 alloc=22*4096
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 587707
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.13.0-0.bpo.1-686-pae root=UUID=2ea92428-0320-44f6-aa76-0a716c007676 ro quiet
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (000379fe:0008fff0)
[    0.000000] Initializing Movable for node 0 (00000000:00000000)
[    0.000000] Memory: 2309148K/2358840K available (5957K kernel code, 623K rwdata, 1868K rodata, 800K init, 456K bss, 49692K reserved, 0K cma-reserved, 1447880K highmem)
[    0.000000] virtual kernel memory layout:
                   fixmap  : 0xffd16000 - 0xfffff000   (2980 kB)
                   pkmap   : 0xffa00000 - 0xffc00000   (2048 kB)
                   vmalloc : 0xf81fe000 - 0xff9fe000   ( 120 MB)
                   lowmem  : 0xc0000000 - 0xf79fe000   ( 889 MB)
                     .init : 0xdb850000 - 0xdb918000   ( 800 kB)
                     .data : 0xdb5d15cd - 0xdb841c00   (2497 kB)
                     .text : 0xdb000000 - 0xdb5d15cd   (5957 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] ftrace: allocating 27240 entries in 54 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=1.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[    0.000000] NR_IRQS: 2304, nr_irqs: 256, preallocated irqs: 16
[    0.000000] CPU 0 irqstacks, hard=f74a8000 soft=f74aa000
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.004000] tsc: Fast TSC calibration using PIT
[    0.008000] tsc: Detected 1808.757 MHz processor
[    0.008000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3617.51 BogoMIPS (lpj=7235028)
[    0.008000] pid_max: default: 32768 minimum: 301
[    0.008000] ACPI: Core revision 20170531
[    0.013976] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.014025] Security Framework initialized
[    0.014027] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.014039] AppArmor: AppArmor disabled by boot time parameter
[    0.014069] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.014078] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.014403] mce: CPU supports 5 MCE banks
[    0.014422] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[    0.014423] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
[    0.020836] Freeing SMP alternatives memory: 28K
[    0.022840] smpboot: Max logical packages: 1
[    0.022850] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.023197] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[    0.064000] smpboot: CPU0: AMD Athlon(tm) 64 Processor 2800+ (family: 0xf, model: 0x4, stepping: 0x8)
[    0.064000] Performance Events: AMD PMU driver.
[    0.064000] ... version:                0
[    0.064000] ... bit width:              48
[    0.064000] ... generic registers:      4
[    0.064000] ... value mask:             0000ffffffffffff
[    0.064000] ... max period:             00007fffffffffff
[    0.064000] ... fixed-purpose events:   0
[    0.064000] ... event mask:             000000000000000f
[    0.064000] Hierarchical SRCU implementation.
[    0.064000] smp: Bringing up secondary CPUs ...
[    0.064000] smp: Brought up 1 node, 1 CPU
[    0.064000] smpboot: Total of 1 processors activated (3617.51 BogoMIPS)
[    0.064000] devtmpfs: initialized
[    0.064000] PM: Registering ACPI NVS region [mem 0x8fff0000-0x8fff2fff] (12288 bytes)
[    0.064000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.064000] futex hash table entries: 256 (order: 2, 16384 bytes)
[    0.064000] pinctrl core: initialized pinctrl subsystem
[    0.064000] NET: Registered protocol family 16
[    0.064000] cpuidle: using governor ladder
[    0.064000] cpuidle: using governor menu
[    0.064000] node 0 link 0: io port [1000, fffff]
[    0.064000] TOM: 0000000090000000 aka 2304M
[    0.064000] node 0 link 0: mmio [a0000, bffff]
[    0.064000] node 0 link 0: mmio [90000000, ff70ffff]
[    0.064000] bus: [bus 00-ff] on node 0 link 0
[    0.064000] bus: 00 [io  0x0000-0xffff]
[    0.064000] bus: 00 [mem 0x000a0000-0x000bffff]
[    0.064000] bus: 00 [mem 0x90000000-0xfcffffffff]
[    0.064000] ACPI: bus type PCI registered
[    0.064000] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.064000] PCI: Using configuration type 1 for base access
[    0.064000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.064000] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.064131] ACPI: Added _OSI(Module Device)
[    0.064132] ACPI: Added _OSI(Processor Device)
[    0.064134] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.064135] ACPI: Added _OSI(Processor Aggregator Device)
[    0.068388] ACPI: Interpreter enabled
[    0.068415] ACPI: (supports S0 S1 S4 S5)
[    0.068417] ACPI: Using IOAPIC for interrupt routing
[    0.068455] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.069965] ACPI: Power Resource [ISAV] (on)
[    0.079073] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.079081] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[    0.079089] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.079094] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[    0.079150] acpi PNP0A03:00: host bridge window expanded to [io  0x0000-0x0cf7]; [io  0x0000-0x0cf7 window] ignored
[    0.079540] PCI host bridge to bus 0000:00
[    0.079543] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.079546] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.079548] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.079550] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.079553] pci_bus 0000:00: root bus resource [mem 0x90000000-0xfebfffff window]
[    0.079556] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.079572] pci 0000:00:00.0: [10de:00e1] type 00 class 0x060000
[    0.079585] pci 0000:00:00.0: reg 0x10: [mem 0xe0000000-0xe7ffffff pref]
[    0.079796] pci 0000:00:01.0: [10de:00e0] type 00 class 0x060100
[    0.079974] pci 0000:00:01.1: [10de:00e4] type 00 class 0x0c0500
[    0.079983] pci 0000:00:01.1: reg 0x10: [io  0xe400-0xe41f]
[    0.079994] pci 0000:00:01.1: reg 0x20: [io  0x4c00-0x4c3f]
[    0.079999] pci 0000:00:01.1: reg 0x24: [io  0x4c40-0x4c7f]
[    0.080021] pci 0000:00:01.1: PME# supported from D3hot D3cold
[    0.080190] pci 0000:00:02.0: [10de:00e7] type 00 class 0x0c0310
[    0.080199] pci 0000:00:02.0: reg 0x10: [mem 0xea004000-0xea004fff]
[    0.080226] pci 0000:00:02.0: supports D1 D2
[    0.080228] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.080393] pci 0000:00:02.1: [10de:00e7] type 00 class 0x0c0310
[    0.080402] pci 0000:00:02.1: reg 0x10: [mem 0xea005000-0xea005fff]
[    0.080428] pci 0000:00:02.1: supports D1 D2
[    0.080430] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.080594] pci 0000:00:02.2: [10de:00e8] type 00 class 0x0c0320
[    0.080603] pci 0000:00:02.2: reg 0x10: [mem 0xea000000-0xea0000ff]
[    0.080634] pci 0000:00:02.2: supports D1 D2
[    0.080636] pci 0000:00:02.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.080802] pci 0000:00:05.0: [10de:00df] type 00 class 0x068000
[    0.080810] pci 0000:00:05.0: reg 0x10: [mem 0xea001000-0xea001fff]
[    0.080815] pci 0000:00:05.0: reg 0x14: [io  0xb800-0xb807]
[    0.080839] pci 0000:00:05.0: supports D1 D2
[    0.080841] pci 0000:00:05.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.081005] pci 0000:00:06.0: [10de:00ea] type 00 class 0x040100
[    0.081013] pci 0000:00:06.0: reg 0x10: [io  0xbc00-0xbcff]
[    0.081018] pci 0000:00:06.0: reg 0x14: [io  0xc000-0xc07f]
[    0.081022] pci 0000:00:06.0: reg 0x18: [mem 0xea002000-0xea002fff]
[    0.081045] pci 0000:00:06.0: supports D1 D2
[    0.081200] pci 0000:00:08.0: [10de:00e5] type 00 class 0x01018a
[    0.081217] pci 0000:00:08.0: reg 0x20: [io  0xf000-0xf00f]
[    0.081225] pci 0000:00:08.0: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.081227] pci 0000:00:08.0: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.081228] pci 0000:00:08.0: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.081230] pci 0000:00:08.0: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.081398] pci 0000:00:0a.0: [10de:00e3] type 00 class 0x010185
[    0.081406] pci 0000:00:0a.0: reg 0x10: [io  0x09f0-0x09f7]
[    0.081410] pci 0000:00:0a.0: reg 0x14: [io  0x0bf0-0x0bf3]
[    0.081415] pci 0000:00:0a.0: reg 0x18: [io  0x0970-0x0977]
[    0.081419] pci 0000:00:0a.0: reg 0x1c: [io  0x0b70-0x0b73]
[    0.081423] pci 0000:00:0a.0: reg 0x20: [io  0xdc00-0xdc0f]
[    0.081427] pci 0000:00:0a.0: reg 0x24: [io  0xe000-0xe07f]
[    0.081595] pci 0000:00:0b.0: [10de:00e2] type 01 class 0x060400
[    0.081779] pci 0000:00:0e.0: [10de:00ed] type 01 class 0x060400
[    0.081963] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
[    0.082125] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
[    0.082281] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
[    0.082431] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
[    0.082637] pci 0000:01:00.0: [1002:5961] type 00 class 0x030000
[    0.082653] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xd7ffffff pref]
[    0.082661] pci 0000:01:00.0: reg 0x14: [io  0xa000-0xa0ff]
[    0.082669] pci 0000:01:00.0: reg 0x18: [mem 0xe9010000-0xe901ffff]
[    0.082692] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[    0.082720] pci 0000:01:00.0: supports D1 D2
[    0.082780] pci 0000:01:00.1: [1002:5941] type 00 class 0x038000
[    0.082793] pci 0000:01:00.1: reg 0x10: [mem 0xd8000000-0xdfffffff pref]
[    0.082799] pci 0000:01:00.1: reg 0x14: [mem 0xe9000000-0xe900ffff]
[    0.082841] pci 0000:01:00.1: supports D1 D2
[    0.082915] pci 0000:00:0b.0: PCI bridge to [bus 01]
[    0.082919] pci 0000:00:0b.0:   bridge window [io  0xa000-0xafff]
[    0.082922] pci 0000:00:0b.0:   bridge window [mem 0xe8000000-0xe9ffffff]
[    0.082925] pci 0000:00:0b.0:   bridge window [mem 0xd0000000-0xdfffffff pref]
[    0.082979] pci 0000:00:0e.0: PCI bridge to [bus 02]
[    0.082987] pci_bus 0000:00: on NUMA node 0
[    0.083151] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.083229] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.083302] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.083374] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.083446] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.083520] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.083592] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.083667] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.083738] ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.083812] ACPI: PCI Interrupt Link [LACI] (IRQs *3 4 5 6 7 10 11 12 14 15)
[    0.083885] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.083958] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.084041] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.084113] ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.084185] ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.084257] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.084336] ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.084415] ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.084488] ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
[    0.084550] ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled.
[    0.084611] ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled.
[    0.084672] ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled.
[    0.084733] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
[    0.084825] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
[    0.084917] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
[    0.085009] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
[    0.085101] ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22 23) *0, disabled.
[    0.085193] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
[    0.085285] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
[    0.085377] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
[    0.085469] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
[    0.085560] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
[    0.085652] ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22 23) *0, disabled.
[    0.085744] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[    0.085847] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.
[    0.085950] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
[    0.086767] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[    0.086771] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.086773] pci 0000:01:00.0: vgaarb: bridge control possible
[    0.086774] vgaarb: loaded
[    0.086868] EDAC MC: Ver: 3.0.0
[    0.087060] PCI: Using ACPI for IRQ routing
[    0.087065] PCI: pci_cache_line_size set to 64 bytes
[    0.087098] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[    0.087101] e820: reserve RAM buffer [mem 0x8fff0000-0x8fffffff]
[    0.087368] clocksource: Switched to clocksource refined-jiffies
[    0.108236] VFS: Disk quotas dquot_6.6.0
[    0.108272] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.108424] pnp: PnP ACPI init
[    0.108574] system 00:00: [io  0x4000-0x407f] has been reserved
[    0.108577] system 00:00: [io  0x4080-0x40ff] has been reserved
[    0.108580] system 00:00: [io  0x4400-0x447f] has been reserved
[    0.108582] system 00:00: [io  0x4480-0x44ff] has been reserved
[    0.108585] system 00:00: [io  0x4800-0x487f] has been reserved
[    0.108587] system 00:00: [io  0x4880-0x48ff] has been reserved
[    0.108593] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.108838] system 00:01: [mem 0x000d5800-0x000d7fff] has been reserved
[    0.108842] system 00:01: [mem 0x000f0000-0x000f7fff] could not be reserved
[    0.108844] system 00:01: [mem 0x000f8000-0x000fbfff] could not be reserved
[    0.108847] system 00:01: [mem 0x000fc000-0x000fffff] could not be reserved
[    0.108849] system 00:01: [mem 0x8fff0000-0x8fffffff] could not be reserved
[    0.108852] system 00:01: [mem 0xffff0000-0xffffffff] has been reserved
[    0.108855] system 00:01: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.108858] system 00:01: [mem 0x00100000-0x8ffeffff] could not be reserved
[    0.108860] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.108863] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved
[    0.108865] system 00:01: [mem 0xfefff000-0xfeffffff] could not be reserved
[    0.108868] system 00:01: [mem 0xfff80000-0xfff80fff] has been reserved
[    0.108871] system 00:01: [mem 0xfff90000-0xfffbffff] has been reserved
[    0.108873] system 00:01: [mem 0xfffed000-0xfffeffff] has been reserved
[    0.108876] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.109628] system 00:02: [io  0x0b78-0x0b7b] has been reserved
[    0.109631] system 00:02: [io  0x0f78-0x0f7b] has been reserved
[    0.109634] system 00:02: [io  0x0a78-0x0a7b] has been reserved
[    0.109637] system 00:02: [io  0x0e78-0x0e7b] has been reserved
[    0.109639] system 00:02: [io  0x0bbc-0x0bbf] has been reserved
[    0.109642] system 00:02: [io  0x0fbc-0x0fbf] has been reserved
[    0.109644] system 00:02: [io  0x04d0-0x04d1] has been reserved
[    0.109647] system 00:02: [io  0x0290-0x0297] has been reserved
[    0.109651] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.109702] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.109837] pnp 00:04: [dma 2]
[    0.109883] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.110131] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.110603] pnp 00:06: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.110740] pnp 00:07: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.110798] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.110824] pnp: PnP ACPI: found 9 devices
[    0.110827] PnPBIOS: Disabled
[    0.147777] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.147795] clocksource: Switched to clocksource acpi_pm
[    0.147829] pci 0000:01:00.0: BAR 6: assigned [mem 0xe8000000-0xe801ffff pref]
[    0.147833] pci 0000:00:0b.0: PCI bridge to [bus 01]
[    0.147836] pci 0000:00:0b.0:   bridge window [io  0xa000-0xafff]
[    0.147841] pci 0000:00:0b.0:   bridge window [mem 0xe8000000-0xe9ffffff]
[    0.147844] pci 0000:00:0b.0:   bridge window [mem 0xd0000000-0xdfffffff pref]
[    0.147849] pci 0000:00:0e.0: PCI bridge to [bus 02]
[    0.147856] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.147858] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.147860] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.147862] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window]
[    0.147865] pci_bus 0000:00: resource 8 [mem 0x90000000-0xfebfffff window]
[    0.147867] pci_bus 0000:01: resource 0 [io  0xa000-0xafff]
[    0.147869] pci_bus 0000:01: resource 1 [mem 0xe8000000-0xe9ffffff]
[    0.147871] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff pref]
[    0.147871] NET: Registered protocol family 2
[    0.147871] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.147871] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.147871] TCP: Hash tables configured (established 8192 bind 8192)
[    0.147871] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.147871] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.147871] NET: Registered protocol family 1
[    0.147871] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
[    0.228317] ACPI: PCI Interrupt Link [APCG] enabled at IRQ 22
[    0.308302] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21
[    0.308428] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.308433] PCI: CLS 32 bytes, default 64
[    0.308513] Unpacking initramfs...
[    0.883585] Freeing initrd memory: 17284K
[    0.884183] audit: initializing netlink subsys (disabled)
[    0.884675] audit: type=2000 audit(1509997474.884:1): state=initialized audit_enabled=0 res=1
[    0.884705] workingset: timestamp_bits=14 max_order=20 bucket_order=6
[    0.884728] zbud: loaded
[    2.719088] tsc: Refined TSC clocksource calibration: 1808.802 MHz
[    2.719096] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1a12a47f6d7, max_idle_ns: 440795210785 ns
[    2.719971] Key type asymmetric registered
[    2.719973] Asymmetric key parser 'x509' registered
[    2.719991] bounce: pool size: 64 pages
[    2.720027] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    2.720072] io scheduler noop registered
[    2.720073] io scheduler deadline registered
[    2.720091] io scheduler cfq registered (default)
[    2.720093] io scheduler mq-deadline registered
[    2.720280] ACPI: ACPI: processor limited to max C-state 1
[    2.720390] GHES: HEST is not enabled!
[    2.720434] isapnp: Scanning for PnP cards...
[    3.073973] isapnp: No Plug & Play device found
[    3.074078] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    3.094473] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    3.094920] Linux agpgart interface v0.103
[    3.094971] agpgart-amd64 0000:00:00.0: AGP bridge [10de/00e1]
[    3.094978] agpgart-amd64 0000:00:00.0: aperture size 4096 MB is not right, using settings from NB
[    3.094983] agpgart-amd64 0000:00:00.0: setting up Nforce3 AGP
[    3.099198] agpgart-amd64 0000:00:00.0: AGP aperture is 128M @ 0xe0000000
[    3.099519] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    3.102017] serio: i8042 KBD port at 0x60,0x64 irq 1
[    3.102025] serio: i8042 AUX port at 0x60,0x64 irq 12
[    3.102213] mousedev: PS/2 mouse device common for all mice
[    3.102276] rtc_cmos 00:03: RTC can wake from S4
[    3.102409] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    3.102431] rtc_cmos 00:03: alarms up to one year, y3k, 242 bytes nvram
[    3.102453] ledtrig-cpu: registered to indicate activity on CPUs
[    3.102964] NET: Registered protocol family 10
[    3.103269] Segment Routing with IPv6
[    3.103288] mip6: Mobile IPv6
[    3.103290] NET: Registered protocol family 17
[    3.103294] mpls_gso: MPLS GSO support
[    3.103415] microcode: AMD CPU family 0xf not supported
[    3.103420] Using IPI No-Shortcut mode
[    3.103428] sched_clock: Marking stable (3101363134, 0)->(3203608735, -102245601)
[    3.103603] registered taskstats version 1
[    3.103621] zswap: loaded using pool lzo/zbud
[    3.103675] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    3.103969] rtc_cmos 00:03: setting system clock to 2017-11-06 19:44:37 UTC (1509997477)
[    3.104046] PM: Hibernation image not present or could not be loaded.
[    3.105698] Freeing unused kernel memory: 800K
[    3.105792] Write protecting the kernel text: 5960k
[    3.105853] Write protecting the kernel read-only data: 1872k
[    3.105854] NX-protecting the kernel data: 4280k
[    3.106065] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    3.124397] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    3.210059] Floppy drive(s): fd0 is 1.44M
[    3.231062] i2c i2c-0: nForce2 SMBus adapter at 0x4c00
[    3.231099] i2c i2c-1: nForce2 SMBus adapter at 0x4c40
[    3.234420] ACPI: bus type USB registered
[    3.234462] usbcore: registered new interface driver usbfs
[    3.234479] usbcore: registered new interface driver hub
[    3.239262] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[    3.239580] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 20
[    3.240675] usbcore: registered new device driver usb
[    3.241516] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.241779] ehci-pci: EHCI PCI platform driver
[    3.242417] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    3.245706] SCSI subsystem initialized
[    3.252749] libata version 3.00 loaded.
[    3.254944] FDC 0 is a post-1991 82077
[    3.744090] clocksource: Switched to clocksource tsc
[    3.796569] forcedeth 0000:00:05.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:11:09:8d:51:51
[    3.796572] forcedeth 0000:00:05.0: csum timirq gbit lnktim desc-v2
[    3.797305] ehci-pci 0000:00:02.2: EHCI Host Controller
[    3.797317] ehci-pci 0000:00:02.2: new USB bus registered, assigned bus number 1
[    3.797330] ehci-pci 0000:00:02.2: debug port 1
[    3.797367] ehci-pci 0000:00:02.2: cache line size of 32 is not supported
[    3.797397] ehci-pci 0000:00:02.2: irq 21, io mem 0xea000000
[    3.798354] forcedeth 0000:00:05.0 enp0s5: renamed from eth0
[    3.812018] ehci-pci 0000:00:02.2: USB 2.0 started, EHCI 1.00
[    3.812115] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    3.812118] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.812119] usb usb1: Product: EHCI Host Controller
[    3.812121] usb usb1: Manufacturer: Linux 4.13.0-0.bpo.1-686-pae ehci_hcd
[    3.812123] usb usb1: SerialNumber: 0000:00:02.2
[    3.812332] hub 1-0:1.0: USB hub found
[    3.812344] hub 1-0:1.0: 8 ports detected
[    3.813039] sata_nv 0000:00:0a.0: version 3.5
[    3.813378] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 23
[    3.814243] ohci-pci: OHCI PCI platform driver
[    3.816667] scsi host0: sata_nv
[    3.816954] scsi host1: sata_nv
[    3.817025] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xdc00 irq 23
[    3.817028] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xdc08 irq 23
[    3.817289] pata_amd 0000:00:08.0: version 0.4.1
[    3.819127] scsi host2: pata_amd
[    3.819371] scsi host3: pata_amd
[    3.819435] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[    3.819437] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[    3.819829] ohci-pci 0000:00:02.0: OHCI PCI host controller
[    3.819843] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
[    3.819877] ohci-pci 0000:00:02.0: irq 23, io mem 0xea004000
[    3.878072] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    3.878075] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.878076] usb usb2: Product: OHCI PCI host controller
[    3.878078] usb usb2: Manufacturer: Linux 4.13.0-0.bpo.1-686-pae ohci_hcd
[    3.878080] usb usb2: SerialNumber: 0000:00:02.0
[    3.878562] hub 2-0:1.0: USB hub found
[    3.878574] hub 2-0:1.0: 4 ports detected
[    3.878918] ohci-pci 0000:00:02.1: OHCI PCI host controller
[    3.878926] ohci-pci 0000:00:02.1: new USB bus registered, assigned bus number 3
[    3.878972] ohci-pci 0000:00:02.1: irq 22, io mem 0xea005000
[    3.938037] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    3.938039] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.938041] usb usb3: Product: OHCI PCI host controller
[    3.938043] usb usb3: Manufacturer: Linux 4.13.0-0.bpo.1-686-pae ohci_hcd
[    3.938044] usb usb3: SerialNumber: 0000:00:02.1
[    3.938484] hub 3-0:1.0: USB hub found
[    3.938494] hub 3-0:1.0: 4 ports detected
[    3.982694] ata3.00: native sectors (39102335) is smaller than sectors (39102336)
[    3.982700] ata3.00: ATA-5: ST320413A, 3.58, max UDMA/100
[    3.982702] ata3.00: 39102336 sectors, multi 16: LBA 
[    3.982713] ata3: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc600c000) ACPI=0x3f01f (20:600:0x13)
[    3.985287] ata3.00: configured for UDMA/100
[    4.140011] usb 1-8: new high-speed USB device number 2 using ehci-pci
[    4.239268] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input2
[    4.288027] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    4.289158] usb 1-8: New USB device found, idVendor=2357, idProduct=0108
[    4.289161] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    4.289163] usb 1-8: Product: 802.11n NIC 
[    4.289164] usb 1-8: Manufacturer: Realtek 
[    4.289166] usb 1-8: SerialNumber: 00e04c000001
[    4.326272] ata1.00: ATA-7: ST3808110AS, 2AAA, max UDMA/133
[    4.326277] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    4.401236] ata1.00: configured for UDMA/133
[    4.401430] scsi 0:0:0:0: Direct-Access     ATA      ST3808110AS      2AAA PQ: 0 ANSI: 5
[    4.872029] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    4.880342] ata2.00: ATA-8: WDC WD5000AAKX-001CA0, 15.01H15, max UDMA/133
[    4.880345] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    4.885844] ata2.00: configured for UDMA/133
[    4.885975] scsi 1:0:0:0: Direct-Access     ATA      WDC WD5000AAKX-0 1H15 PQ: 0 ANSI: 5
[    4.886514] scsi 2:0:0:0: Direct-Access     ATA      ST320413A        3.58 PQ: 0 ANSI: 5
[    5.064332] ata4.00: ATAPI: TOSHIBA ODD-DVD SD-R1512, 1010, max UDMA/33
[    5.064341] ata4: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc600c000) ACPI=0x701f (60:600:0x13)
[    5.088262] ata4.00: configured for UDMA/33
[    5.094180] scsi 3:0:0:0: CD-ROM            TOSHIBA  ODD-DVD SD-R1512 1010 PQ: 0 ANSI: 5
[    5.115012] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[    5.115030] sd 0:0:0:0: [sda] Write Protect is off
[    5.115033] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    5.115057] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.116666] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    5.116682] sd 1:0:0:0: [sdb] Write Protect is off
[    5.116685] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    5.116707] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.117186] sd 2:0:0:0: [sdc] 39102336 512-byte logical blocks: (20.0 GB/18.6 GiB)
[    5.117199] sd 2:0:0:0: [sdc] Write Protect is off
[    5.117201] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    5.117222] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.131401] sr 3:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[    5.131406] cdrom: Uniform CD-ROM driver Revision: 3.20
[    5.131606] sr 3:0:0:0: Attached scsi CD-ROM sr0
[    5.148230]  sdb: sdb1 sdb2 < sdb5 >
[    5.148722] sd 1:0:0:0: [sdb] Attached SCSI disk
[    5.165941]  sdc: sdc1 sdc2 < sdc5 sdc6 >
[    5.167107] sd 2:0:0:0: [sdc] Attached SCSI disk
[    5.177464]  sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
[    5.178768] sd 0:0:0:0: [sda] Attached SCSI disk
[    6.790410] random: crng init done
[    6.795847] PM: Starting manual resume from disk
[    6.795853] PM: Hibernation image partition 8:6 present
[    6.795854] PM: Looking for hibernation image.
[    6.796145] PM: Image not found (code -22)
[    6.796146] PM: Hibernation image not present or could not be loaded.
[    7.044568] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    7.991158] ip_tables: (C) 2000-2006 Netfilter Core Team
[    8.094421] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    8.094596] systemd[1]: Detected architecture x86.
[    8.105002] systemd[1]: Set hostname to <debian>.
[    9.471400] systemd[1]: Listening on udev Kernel Socket.
[    9.471808] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    9.472121] systemd[1]: Created slice User and Session Slice.
[    9.472214] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    9.472249] systemd[1]: Reached target Remote File Systems.
[    9.472393] systemd[1]: Listening on Journal Audit Socket.
[    9.472453] systemd[1]: Listening on fsck to fsckd communication Socket.
[    9.978252] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   10.247363] lp: driver loaded but no devices found
[   10.434486] ppdev: user-space parallel port driver
[   10.452200] parport_pc 00:06: reported by Plug and Play ACPI
[   10.452292] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[   10.548140] lp0: using parport0 (interrupt-driven).
[   11.203358] ACPI Exception: AE_NOT_FOUND, Evaluating _PSS (20170531/processor_perflib-330)
[   11.258187] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[   11.258206] ACPI: Power Button [PWRB]
[   11.258313] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[   11.258338] ACPI: Power Button [PWRF]
[   11.370197] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
[   11.700023] snd_intel8x0 0000:00:06.0: intel8x0_measure_ac97_clock: measured 58338 usecs (2864 samples)
[   11.700028] snd_intel8x0 0000:00:06.0: clocking to 46931
[   11.700408] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   11.702769] k8temp 0000:00:18.3: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[   11.711560] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   11.711621] sd 1:0:0:0: Attached scsi generic sg1 type 0
[   11.711672] sd 2:0:0:0: Attached scsi generic sg2 type 0
[   11.711720] sr 3:0:0:0: Attached scsi generic sg3 type 5
[   11.906780] input: PC Speaker as /devices/platform/pcspkr/input/input5
[   12.004311] MCE: In-kernel MCE decoding enabled.
[   12.111533] EDAC amd64: Node 0: DRAM ECC disabled.
[   12.111538] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[   12.124515] ACPI Exception: AE_NOT_FOUND, Evaluating _PSS (20170531/processor_perflib-330)
[   12.131800] powernow_k8: [Firmware Bug]: No PSB or ACPI _PSS objects
[   12.131830] powernow_k8: Make sure that your BIOS is up to date and Cool'N'Quiet support is enabled in BIOS setup                                                                                                
[   12.304801] [drm] radeon kernel modesetting enabled.
[   12.305167] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
[   12.305685] [drm] initializing kernel modesetting (RV280 0x1002:0x5961 0x174B:0x7C13 0x01).
[   12.306268] agpgart-amd64 0000:00:00.0: AGP 3.0 bridge
[   12.306278] agpgart-amd64 0000:00:00.0: putting AGP V3 device into 8x mode
[   12.306299] radeon 0000:01:00.0: putting AGP V3 device into 8x mode
[   12.306305] radeon 0000:01:00.0: GTT: 128M 0xE0000000 - 0xE7FFFFFF
[   12.306309] [drm] Generation 2 PCI interface, using max accessible memory
[   12.306314] radeon 0000:01:00.0: VRAM: 128M 0x00000000D0000000 - 0x00000000D7FFFFFF (128M used)
[   12.306324] [drm] Detected VRAM RAM=128M, BAR=128M
[   12.306325] [drm] RAM width 128bits DDR
[   12.306421] [TTM] Zone  kernel: Available graphics memory: 439690 kiB
[   12.306422] [TTM] Zone highmem: Available graphics memory: 1163630 kiB
[   12.306423] [TTM] Initializing pool allocator
[   12.306430] [TTM] Initializing DMA pool allocator
[   12.306475] [drm] radeon: 128M of VRAM memory ready
[   12.306477] [drm] radeon: 128M of GTT memory ready.
[   12.307477] radeon 0000:01:00.0: WB disabled
[   12.307487] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x00000000e0000000 and cpu addr 0xf827c000
[   12.307490] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   12.307491] [drm] Driver supports precise vblank timestamp query.
[   12.307520] [drm] radeon: irq initialized.
[   12.307539] [drm] Loading R200 Microcode
[   12.639542] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/R200_cp.bin
[   12.639790] [drm] radeon: ring at 0x00000000E0001000
[   12.639813] [drm] ring test succeeded in 0 usecs
[   12.639977] [drm] ib test succeeded in 0 usecs
[   12.641551] [drm] Radeon Display Connectors
[   12.641554] [drm] Connector 0:
[   12.641554] [drm]   VGA-1
[   12.641556] [drm]   DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[   12.641557] [drm]   Encoders:
[   12.641558] [drm]     CRT1: INTERNAL_DAC1
[   12.641559] [drm] Connector 1:
[   12.641559] [drm]   DVI-I-1
[   12.641560] [drm]   HPD1
[   12.641562] [drm]   DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[   12.641562] [drm]   Encoders:
[   12.641563] [drm]     CRT2: INTERNAL_DAC2
[   12.641563] [drm]     DFP1: INTERNAL_TMDS1
[   12.641564] [drm] Connector 2:
[   12.641565] [drm]   SVIDEO-1
[   12.641565] [drm]   Encoders:
[   12.641566] [drm]     TV1: INTERNAL_DAC2
[   12.706067] [drm] fb mappable at 0xD0040000
[   12.706071] [drm] vram apper at 0xD0000000
[   12.706072] [drm] size 5242880
[   12.706072] [drm] fb depth is 24
[   12.706073] [drm]    pitch is 5120
[   12.712696] fbcon: radeondrmfb (fb0) is primary device
[   12.792981] Console: switching to colour frame buffer device 160x64
[   12.815884] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[   12.817767] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 0
[   13.051112] usb 1-8: This Realtek USB WiFi dongle (0x2357:0x0108) is untested!
[   13.051116] usb 1-8: Please report results to Jes.Sorensen@gmail.com
[   13.227909] usb 1-8: Vendor: Realtek
[   13.227914] usb 1-8: Product: 802.11n NI
[   13.227916] usb 1-8: Serial: 
[   13.227918] usb 1-8: rtl8192eu_parse_efuse: dumping efuse (0x200 bytes):
[   13.227921] usb 1-8: 00: 29 81 00 7c 01 40 03 00
[   13.227923] usb 1-8: 08: 40 74 04 50 14 00 00 00
[   13.227925] usb 1-8: 10: 2c 2c 2b 2e 2e 2e 2b 2b
[   13.227926] usb 1-8: 18: 2c 2c 2c f2 ef ef ff ff
[   13.227928] usb 1-8: 20: ff ff ff ff ff ff ff ff
[   13.227929] usb 1-8: 28: ff ff ff ff ff ff ff ff
[   13.227931] usb 1-8: 30: ff ff ff ff ff ff ff ff
[   13.227933] usb 1-8: 38: ff ff 29 29 29 29 29 29
[   13.227934] usb 1-8: 40: 29 29 29 29 29 f2 ef ef
[   13.227936] usb 1-8: 48: ff ff ff ff ff ff ff ff
[   13.227938] usb 1-8: 50: ff ff ff ff ff ff ff ff
[   13.227939] usb 1-8: 58: ff ff ff ff ff ff ff ff
[   13.227941] usb 1-8: 60: ff ff ff ff ff ff ff ff
[   13.227943] usb 1-8: 68: ff ff ff ff ff ff ff ff
[   13.227944] usb 1-8: 70: ff ff ff ff ff ff ff ff
[   13.227946] usb 1-8: 78: ff ff ff ff ff ff ff ff
[   13.227948] usb 1-8: 80: ff ff ff ff ff ff ff ff
[   13.227949] usb 1-8: 88: ff ff ff ff ff ff ff ff
[   13.227951] usb 1-8: 90: ff ff ff ff ff ff ff ff
[   13.227953] usb 1-8: 98: ff ff ff ff ff ff ff ff
[   13.227954] usb 1-8: a0: ff ff ff ff ff ff ff ff
[   13.227956] usb 1-8: a8: ff ff ff ff ff ff ff ff
[   13.227957] usb 1-8: b0: ff ff ff ff ff ff ff ff
[   13.227959] usb 1-8: b8: a1 3e 1e 00 00 00 ff ff
[   13.227961] usb 1-8: c0: ff 01 00 10 00 00 00 ff
[   13.227962] usb 1-8: c8: 00 00 ff ff ff ff ff ff
[   13.227964] usb 1-8: d0: 57 23 08 01 e7 47 02 84
[   13.227966] usb 1-8: d8: 16 f9 16 64 06 0a 03 52
[   13.227967] usb 1-8: e0: 65 61 6c 74 65 6b 20 0e
[   13.227969] usb 1-8: e8: 03 38 30 32 2e 31 31 6e
[   13.227971] usb 1-8: f0: 20 4e 49 43 20 00 00 ff
[   13.227972] usb 1-8: f8: ff ff ff ff ff ff ff ff
[   13.227974] usb 1-8: 100: ff ff ff ff ff ff ff ff
[   13.227976] usb 1-8: 108: ff ff ff ff ff ff ff ff
[   13.227977] usb 1-8: 110: ff ff ff ff ff ff ff 0d
[   13.227979] usb 1-8: 118: 03 00 05 00 30 00 00 00
[   13.227981] usb 1-8: 120: 00 93 ff ff ff ff ff ff
[   13.227982] usb 1-8: 128: ff ff ff ff ff ff ff ff
[   13.227984] usb 1-8: 130: f6 a8 98 2d 03 92 98 00
[   13.227986] usb 1-8: 138: fc 8c 00 11 9b 44 02 0a
[   13.227987] usb 1-8: 140: ff ff ff ff ff ff ff ff
[   13.227989] usb 1-8: 148: ff ff ff ff ff ff ff ff
[   13.227991] usb 1-8: 150: ff ff ff ff ff ff ff ff
[   13.227992] usb 1-8: 158: ff ff ff ff ff ff ff ff
[   13.227994] usb 1-8: 160: ff ff ff ff ff ff ff ff
[   13.227996] usb 1-8: 168: ff ff ff ff ff ff ff ff
[   13.227997] usb 1-8: 170: ff ff ff ff ff ff ff ff
[   13.227999] usb 1-8: 178: ff ff ff ff ff ff ff ff
[   13.228001] usb 1-8: 180: ff ff ff ff ff ff ff ff
[   13.228015] usb 1-8: 188: ff ff ff ff ff ff ff ff
[   13.228017] usb 1-8: 190: ff ff ff ff ff ff ff ff
[   13.228018] usb 1-8: 198: ff ff ff ff ff ff ff ff
[   13.228020] usb 1-8: 1a0: ff ff ff ff ff ff ff ff
[   13.228022] usb 1-8: 1a8: ff ff ff ff ff ff ff ff
[   13.228023] usb 1-8: 1b0: ff ff ff ff ff ff ff ff
[   13.228025] usb 1-8: 1b8: ff ff ff ff ff ff ff ff
[   13.228027] usb 1-8: 1c0: ff ff ff ff ff ff ff ff
[   13.228028] usb 1-8: 1c8: ff ff ff ff ff ff ff ff
[   13.228030] usb 1-8: 1d0: ff ff ff ff ff ff ff ff
[   13.228032] usb 1-8: 1d8: ff ff ff ff ff ff ff ff
[   13.228033] usb 1-8: 1e0: ff ff ff ff ff ff ff ff
[   13.228035] usb 1-8: 1e8: ff ff ff ff ff ff ff ff
[   13.228037] usb 1-8: 1f0: ff ff ff ff ff ff ff ff
[   13.228038] usb 1-8: 1f8: ff ff ff ff ff ff ff ff
[   13.228042] usb 1-8: RTL8192EU rev B (SMIC) 2T2R, TX queues 3, WiFi=1, BT=0, GPS=0, HI PA=0
[   13.228045] usb 1-8: RTL8192EU MAC: 84:16:f9:16:64:06
[   13.228047] usb 1-8: rtl8xxxu: Loading firmware rtlwifi/rtl8192eu_nic.bin
[   13.333658] usb 1-8: firmware: direct-loading firmware rtlwifi/rtl8192eu_nic.bin
[   13.333699] usb 1-8: Firmware revision 19.0 (signature 0x92e1)
[   13.338397] do the RAM reset
[   14.391025] usb 1-8: rtl8192eu_rx_iqk_path_b: Path B RX IQK failed!
[   14.423518] usb 1-8: rtl8192eu_rx_iqk_path_b: Path B RX IQK failed!
[   14.514524] usb 1-8: rtl8192eu_rx_iqk_path_b: Path B RX IQK failed!
[   14.703659] usbcore: registered new interface driver rtl8xxxu
[   14.815055] Adding 2357244k swap on /dev/sda6.  Priority:-1 extents:1 across:2357244k FS
[   15.007388] rtl8xxxu 1-8:1.0 wlx8416f9166406: renamed from wlan0
[   16.662940] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[   16.901976] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[   17.051601] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
[   17.153286] systemd-journald[168]: Received request to flush runtime journal from PID 1
[   21.750258] ACPI Exception: AE_NOT_FOUND, Evaluating _PSS (20170531/processor_perflib-330)
[   21.757764] powernow_k8: [Firmware Bug]: No PSB or ACPI _PSS objects
[   21.757929] powernow_k8: Make sure that your BIOS is up to date and Cool'N'Quiet support is enabled in BIOS setup                                                                                                
[   21.767573] ACPI Exception: AE_NOT_FOUND, Evaluating _PSS (20170531/processor_perflib-330)
[   26.734886] IPv6: ADDRCONF(NETDEV_UP): enp0s5: link is not ready
[   26.735503] forcedeth 0000:00:05.0 enp0s5: no link during initialization
[   26.735814] IPv6: ADDRCONF(NETDEV_UP): enp0s5: link is not ready
[   26.764624] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[   26.781749] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[   26.886732] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[   27.424236] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[   32.417185] gnome-shell[609]: segfault at 0 ip   (null) sp bff4eb3c error 14 in gnome-shell[460000+3000]
[   33.991152] gnome-shell[666]: segfault at 0 ip   (null) sp bfec020c error 14 in gnome-shell[41e000+3000]
[   78.366545] fuse init (API version 7.26)
[  163.580620] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[  189.012852] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[  189.260044] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[  488.876572] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[  514.013682] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[  514.283371] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[  537.957190] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[  544.028545] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[  544.209208] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[  585.034524] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[  595.461408] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[  595.564900] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[  677.441579] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[  685.860312] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[  685.967169] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[  690.054115] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[  701.879051] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[  701.977679] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[  782.794823] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[  791.834617] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[  791.938733] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[  795.688799] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[  805.525743] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[  805.647770] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[  816.721137] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[  822.036885] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[  822.141455] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[  843.560048] usb 1-8: USB disconnect, device number 2
[  843.630605] usb 1-8: rtl8192eu_active_to_emu: Disabling MAC timed out
[  843.630611] usb 1-8: disconnecting
[  854.356041] usb 1-8: new high-speed USB device number 3 using ehci-pci
[  854.505173] usb 1-8: New USB device found, idVendor=2357, idProduct=0108
[  854.505178] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  854.505180] usb 1-8: Product: 802.11n NIC 
[  854.505181] usb 1-8: Manufacturer: Realtek 
[  854.505183] usb 1-8: SerialNumber: 00e04c000001
[  854.506635] usb 1-8: This Realtek USB WiFi dongle (0x2357:0x0108) is untested!
[  854.506639] usb 1-8: Please report results to Jes.Sorensen@gmail.com
[  854.676045] usb 1-8: Vendor: Realtek
[  854.676050] usb 1-8: Product: 802.11n NI
[  854.676051] usb 1-8: Serial: 
[  854.676054] usb 1-8: rtl8192eu_parse_efuse: dumping efuse (0x200 bytes):
[  854.676056] usb 1-8: 00: 29 81 00 7c 01 40 03 00
[  854.676058] usb 1-8: 08: 40 74 04 50 14 00 00 00
[  854.676060] usb 1-8: 10: 2c 2c 2b 2e 2e 2e 2b 2b
[  854.676062] usb 1-8: 18: 2c 2c 2c f2 ef ef ff ff
[  854.676063] usb 1-8: 20: ff ff ff ff ff ff ff ff
[  854.676065] usb 1-8: 28: ff ff ff ff ff ff ff ff
[  854.676067] usb 1-8: 30: ff ff ff ff ff ff ff ff
[  854.676068] usb 1-8: 38: ff ff 29 29 29 29 29 29
[  854.676070] usb 1-8: 40: 29 29 29 29 29 f2 ef ef
[  854.676072] usb 1-8: 48: ff ff ff ff ff ff ff ff
[  854.676073] usb 1-8: 50: ff ff ff ff ff ff ff ff
[  854.676075] usb 1-8: 58: ff ff ff ff ff ff ff ff
[  854.676077] usb 1-8: 60: ff ff ff ff ff ff ff ff
[  854.676079] usb 1-8: 68: ff ff ff ff ff ff ff ff
[  854.676080] usb 1-8: 70: ff ff ff ff ff ff ff ff
[  854.676082] usb 1-8: 78: ff ff ff ff ff ff ff ff
[  854.676084] usb 1-8: 80: ff ff ff ff ff ff ff ff
[  854.676085] usb 1-8: 88: ff ff ff ff ff ff ff ff
[  854.676087] usb 1-8: 90: ff ff ff ff ff ff ff ff
[  854.676089] usb 1-8: 98: ff ff ff ff ff ff ff ff
[  854.676090] usb 1-8: a0: ff ff ff ff ff ff ff ff
[  854.676092] usb 1-8: a8: ff ff ff ff ff ff ff ff
[  854.676093] usb 1-8: b0: ff ff ff ff ff ff ff ff
[  854.676095] usb 1-8: b8: a1 3e 1e 00 00 00 ff ff
[  854.676097] usb 1-8: c0: ff 01 00 10 00 00 00 ff
[  854.676098] usb 1-8: c8: 00 00 ff ff ff ff ff ff
[  854.676100] usb 1-8: d0: 57 23 08 01 e7 47 02 84
[  854.676102] usb 1-8: d8: 16 f9 16 64 06 0a 03 52
[  854.676103] usb 1-8: e0: 65 61 6c 74 65 6b 20 0e
[  854.676105] usb 1-8: e8: 03 38 30 32 2e 31 31 6e
[  854.676107] usb 1-8: f0: 20 4e 49 43 20 00 00 ff
[  854.676108] usb 1-8: f8: ff ff ff ff ff ff ff ff
[  854.676110] usb 1-8: 100: ff ff ff ff ff ff ff ff
[  854.676112] usb 1-8: 108: ff ff ff ff ff ff ff ff
[  854.676114] usb 1-8: 110: ff ff ff ff ff ff ff 0d
[  854.676115] usb 1-8: 118: 03 00 05 00 30 00 00 00
[  854.676117] usb 1-8: 120: 00 93 ff ff ff ff ff ff
[  854.676119] usb 1-8: 128: ff ff ff ff ff ff ff ff
[  854.676120] usb 1-8: 130: f6 a8 98 2d 03 92 98 00
[  854.676122] usb 1-8: 138: fc 8c 00 11 9b 44 02 0a
[  854.676124] usb 1-8: 140: ff ff ff ff ff ff ff ff
[  854.676125] usb 1-8: 148: ff ff ff ff ff ff ff ff
[  854.676127] usb 1-8: 150: ff ff ff ff ff ff ff ff
[  854.676129] usb 1-8: 158: ff ff ff ff ff ff ff ff
[  854.676130] usb 1-8: 160: ff ff ff ff ff ff ff ff
[  854.676132] usb 1-8: 168: ff ff ff ff ff ff ff ff
[  854.676134] usb 1-8: 170: ff ff ff ff ff ff ff ff
[  854.676135] usb 1-8: 178: ff ff ff ff ff ff ff ff
[  854.676137] usb 1-8: 180: ff ff ff ff ff ff ff ff
[  854.676139] usb 1-8: 188: ff ff ff ff ff ff ff ff
[  854.676140] usb 1-8: 190: ff ff ff ff ff ff ff ff
[  854.676142] usb 1-8: 198: ff ff ff ff ff ff ff ff
[  854.676144] usb 1-8: 1a0: ff ff ff ff ff ff ff ff
[  854.676145] usb 1-8: 1a8: ff ff ff ff ff ff ff ff
[  854.676147] usb 1-8: 1b0: ff ff ff ff ff ff ff ff
[  854.676149] usb 1-8: 1b8: ff ff ff ff ff ff ff ff
[  854.676151] usb 1-8: 1c0: ff ff ff ff ff ff ff ff
[  854.676152] usb 1-8: 1c8: ff ff ff ff ff ff ff ff
[  854.676154] usb 1-8: 1d0: ff ff ff ff ff ff ff ff
[  854.676156] usb 1-8: 1d8: ff ff ff ff ff ff ff ff
[  854.676157] usb 1-8: 1e0: ff ff ff ff ff ff ff ff
[  854.676159] usb 1-8: 1e8: ff ff ff ff ff ff ff ff
[  854.676161] usb 1-8: 1f0: ff ff ff ff ff ff ff ff
[  854.676162] usb 1-8: 1f8: ff ff ff ff ff ff ff ff
[  854.676166] usb 1-8: RTL8192EU rev B (SMIC) 2T2R, TX queues 3, WiFi=1, BT=0, GPS=0, HI PA=0
[  854.676169] usb 1-8: RTL8192EU MAC: 84:16:f9:16:64:06
[  854.676171] usb 1-8: rtl8xxxu: Loading firmware rtlwifi/rtl8192eu_nic.bin
[  854.676257] usb 1-8: firmware: direct-loading firmware rtlwifi/rtl8192eu_nic.bin
[  854.676290] usb 1-8: Firmware revision 19.0 (signature 0x92e1)
[  855.656034] usb 1-8: rtl8192eu_rx_iqk_path_b: Path B RX IQK failed!
[  855.688657] usb 1-8: rtl8192eu_rx_iqk_path_b: Path B RX IQK failed!
[  855.738029] usb 1-8: rtl8192eu_rx_iqk_path_a: Path A RX IQK failed!
[  855.770154] usb 1-8: rtl8192eu_rx_iqk_path_a: Path A RX IQK failed!
[  855.902778] usb 1-8: rtl8192eu_rx_iqk_path_b: Path B RX IQK failed!
[  855.935152] usb 1-8: rtl8192eu_rx_iqk_path_b: Path B RX IQK failed!
[  856.022563] rtl8xxxu 1-8:1.0 wlx8416f9166406: renamed from wlan0
[  856.067367] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[  856.091592] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[  856.191575] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[  856.227460] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[  874.708975] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[  875.936594] wlx8416f9166406: authenticate with a0:1b:29:39:21:1a
[  875.964055] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 1/3)
[  876.168045] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 2/3)
[  876.372043] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 3/3)
[  876.576042] wlx8416f9166406: authentication with a0:1b:29:39:21:1a timed out
[  877.844622] wlx8416f9166406: authenticate with a0:1b:29:39:21:1a
[  877.871862] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 1/3)
[  878.072043] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 2/3)
[  878.276043] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 3/3)
[  878.480055] wlx8416f9166406: authentication with a0:1b:29:39:21:1a timed out
[  880.148635] wlx8416f9166406: authenticate with a0:1b:29:39:21:1a
[  880.174787] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 1/3)
[  880.376044] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 2/3)
[  880.580043] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 3/3)
[  880.784051] wlx8416f9166406: authentication with a0:1b:29:39:21:1a timed out
[  882.952627] wlx8416f9166406: authenticate with a0:1b:29:39:21:1a
[  882.978696] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 1/3)
[  883.180041] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 2/3)
[  883.384039] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 3/3)
[  883.588038] wlx8416f9166406: authentication with a0:1b:29:39:21:1a timed out
[  895.920656] wlx8416f9166406: authenticate with a0:1b:29:39:21:1a
[  895.947392] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 1/3)
[  896.148039] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 2/3)
[  896.352042] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 3/3)
[  896.556089] wlx8416f9166406: authentication with a0:1b:29:39:21:1a timed out
[  900.065624] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[  900.178506] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[  912.012362] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[  913.216643] wlx8416f9166406: authenticate with a0:1b:29:39:21:1a
[  913.245439] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 1/3)
[  913.448047] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 2/3)
[  913.652047] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 3/3)
[  913.856054] wlx8416f9166406: authentication with a0:1b:29:39:21:1a timed out
[  925.028652] wlx8416f9166406: authenticate with a0:1b:29:39:21:1a
[  925.054524] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 1/3)
[  925.256040] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 2/3)
[  925.460040] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 3/3)
[  925.664042] wlx8416f9166406: authentication with a0:1b:29:39:21:1a timed out
[  937.010778] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[  937.256629] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[  995.598353] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[  996.804653] wlx8416f9166406: authenticate with a0:1b:29:39:21:1a
[  996.831552] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 1/3)
[  997.032046] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 2/3)
[  997.236041] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 3/3)
[  997.440044] wlx8416f9166406: authentication with a0:1b:29:39:21:1a timed out
[ 1008.608655] wlx8416f9166406: authenticate with a0:1b:29:39:21:1a
[ 1008.635270] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 1/3)
[ 1008.836050] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 2/3)
[ 1009.040047] wlx8416f9166406: send auth to a0:1b:29:39:21:1a (try 3/3)
[ 1009.244045] wlx8416f9166406: authentication with a0:1b:29:39:21:1a timed out
[ 1021.011393] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready
[ 1021.248373] IPv6: ADDRCONF(NETDEV_UP): wlx8416f9166406: link is not ready

root@debian:~# iwlist wlx8416f9166406 scan
bash: iwlist: nie znaleziono polecenia
root@debian:~#

Offline

 

#50  2017-11-06 21:33:22

  antonion - Użytkownik

antonion
Użytkownik
Zarejestrowany: 2017-11-05

Re: Instalacja karty wifi usb tp-link wn822n

Wydając polecenie $ git clone https://github.com/Mange/rtl8192eu-linux-driver otrzymuję: nie znaleziono polecenia.

Offline

 

Stopka forum

Powered by PunBB
© Copyright 2002–2005 Rickard Andersson
Możesz wyłączyć AdBlock — tu nie ma reklam ;-)