Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!

Ogłoszenie

Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.

#1  2017-09-05 22:13:00

  seler - Użytkownik

seler
Użytkownik
Zarejestrowany: 2012-05-15

Problem z dźwiękiem przez HDMI

Hej, podłączyłem w końcu swój serwerek (https://forum.dug.net.pl/viewtopic.php?id=29579) pod TV przez HDMI i na starcie mam problem z dźwiękiem.

Maszyna:
płyta główna Asrock J4205
"- 7.1 CH HD Audio with Content Protection (Realtek ALC892 Audio Codec)*"
~ http://www.asrock.com/mb/Intel/J4205-ITX/index.us.a … pecifications
system: Debian Stretch z XFCE
uname -a: Linux server-j4205 4.9.0-3-amd64 #1 SMP Debian 4.9.30-2+deb9u3 (2017-08-06) x86_64 GNU/Linux

Mianowicie po podpięciu urządzenia kablem HDMI pod TV i uruchomieniu kompa - dźwięku nie ma. Nawet po ustawieniu w Pavucontrol profilu "Wyjście Digital Stereo (HDMI)". Żeby dźwięk się pojawił należy:
-wypiąć i wpiąć kabel HDMI
-odpalić komendę "pulseaudio -k"
-pulseaudio się wyłącza i po sekundzie uruchamia się na nowo
-dźwięk jest
I tak po każdym resecie maszyny. Samo killowanie pulseaudio bez wyciągania kabla nie pomaga.

Nie mam pomysłu jak szukać dalej przyczyny tego działania, i jak to naprawić. Tutaj wyniki alsa-info.sh sprzed i po naprawie dźwięku (większej różnicy chyba nie ma):
http://www.alsa-project.org/db/?f=aa662b38d6c0be4e9 … 919c7d626342c - dźwięku nie ma
http://www.alsa-project.org/db/?f=f3236469b11852abb … aa936ef67f1f4 - dźwięk jest

Help!


a to feler westchnął seler

Offline

 

#2  2017-09-06 02:48:10

  davidoski - Użytkownik

davidoski
Użytkownik
Skąd: Poznań
Zarejestrowany: 2007-04-17

Re: Problem z dźwiękiem przez HDMI

Ja miałem podobny problem z kartą dźwiękową SoundBlaster na kablu USB. Rozwiązałem ten problem w taki sposób, że zrobiłem sobie skrypt, który odpala pavucontrol i wydaje komendę pulseaudio -k po starcie kompa. Z tym, że nie muszę wypinać i wpinać kabla, żeby załadowało dźwięk. Nie wiem czemu u ciebie trzeba wpinać i wypinać kabel.

W KDE jest możliwe ustawienie domyślnego źródła dźwięku i tam musiałem ustawić swoją kartę jako domyślną i wyłączyć wbudowany dźwięk. Nie wiem jak to wygląda w XFCE. Może też tam trzeba coś ustawić w opcjach źródła dźwięku.

Ostatnio edytowany przez davidoski (2017-09-06 02:53:20)

Offline

 

#3  2017-09-06 20:36:42

  seler - Użytkownik

seler
Użytkownik
Zarejestrowany: 2012-05-15

Re: Problem z dźwiękiem przez HDMI

nieco więcej info...
dodałem linię w /etc/pulse/client.conf

Kod:

extra-arguments = -vvvvv --log-target=newfile:/tmp/pulseverbose.log --log-time=1

i zarejestrowałem takie logi pulseaudio:

PO STARCIE KOMPUTERA - DŹWIĘKU BRAK
https://pastebin.com/raw/va4nyDrV

PO ODPIĘCIU KABLA HDMI - DŹWIĘKU BRAK
https://pastebin.com/Tma85QGM

PO PRZYPIĘCIU KABLA HDMI - DŹWIĘK JEST (tym razem zaskoczył bez komendy pulseaudio -k)
https://pastebin.com/NpKGjyEq

Logi trochę długawe, nie zmieściły się w poście...


a to feler westchnął seler

Offline

 

#4  2017-09-07 00:58:02

  wikingagressor - Użytkownik

wikingagressor
Użytkownik
Skąd: Józefów k.Błonia, mazowieck
Zarejestrowany: 2015-02-03

Re: Problem z dźwiękiem przez HDMI

Mi to wyglada, ze gdzies na starcie pulseaudio nie ma skonfigurowanego wyjscia defaultowego i nie wie gdzie puszczac dzwiek. Dopiero po ponownym podlaczeniu hdmi namyslilo sie zeby tam puscic sygnal jak udev jej zaczal krzyczec "hej, nowe wyjscie audio sie podpielo, moze bys tam laskawie sygnal puscil".


Peace, Love and Debian for the World!!!

Offline

 

#5  2017-09-07 03:10:44

  davidoski - Użytkownik

davidoski
Użytkownik
Skąd: Poznań
Zarejestrowany: 2007-04-17

Re: Problem z dźwiękiem przez HDMI

Ja bym szukał w plikach konfiguracyjnych ustawień ładowania domyślnego urządzenia. Ewidentnie z tym jest problem na starcie. U mnie w /etc/pulse są takie pliki.
http://pix.toile-libre.org/upload/original/1504746381.png

Treść mojego default.pa:

https://pastebin.com/Cd9bAXsP

Treść mojego system.pa:

https://pastebin.com/bKUDui93

Treść mojego client.conf

https://pastebin.com/Xmgx7HCs

Treść mojego deamon.conf

https://pastebin.com/sgJE9TSb

Ostatnio edytowany przez davidoski (2017-09-07 03:20:55)

Offline

 

#6  2017-09-07 16:55:56

  seler - Użytkownik

seler
Użytkownik
Zarejestrowany: 2012-05-15

Re: Problem z dźwiękiem przez HDMI

@davidoski:
Sprawdziłem swoje pliki konfiguracyjne względem twoich i jedyna różnica to dodatkowa ścieżka w /etc/pulse/client.conf

Kod:

extra-arguments = -vvvvv --log-target=newfile:/tmp/pulseverbose.log --log-time=1

oraz zakomentowanie w moim default.pa

Kod:

#load-module module-suspend-on-idle

bo wcześniej wygrzebałem w logach jakiś warning z tym związany i myślałem, że to ten moduł mógł bruździć - ale nic z tego.
Poza tym to standardowe pliki po instalacji debiana.

@wikingagressor:
Szczerze mówiąc to nie mogłem w logach znaleźć bezpośredniej przyczyny tego problemu. Jaki fragment wg ciebie o tym świadczy?
Nawet jeżeli jest tak jak mówisz, to jak to naprawić?

Albo może pozbyć się całkowicie pulseaudio i ustawić jakoś na sztywno w alsie wyjście na hdmi?

Dzięki za odpowiedzi.

Ostatnio edytowany przez seler (2017-09-07 17:00:08)


a to feler westchnął seler

Offline

 

#7  2017-09-07 18:30:22

  Jacekalex - Podobno człowiek...;)

Jacekalex
Podobno człowiek...;)
Skąd: /dev/random
Zarejestrowany: 2008-01-07

Re: Problem z dźwiękiem przez HDMI

Albo może pozbyć się całkowicie pulseaudio i ustawić jakoś na sztywno w alsie wyjście na hdmi?

Ja mam teraz Alsę puszczoną przez HDMI i chodzi.

Tylko jest ten malutki problem, że HDMI jest wyjściem cyfrowym, dlatego globalny regulator głośności musi brykać przez softvol.

Poza tym mam jeszcze starego Skypa-4.3 na Apulse, ale ten nowy SkypeforLinux
u mnie nie chce gadać z Apulse w ogóle.

PS:
Wyjście na HDMI przez dmix u mnie:

Kod:

pcm.nvidiadmix {
    type dmix
    ipc_key 1024
    ipc_perm 0660
   slave {
        pcm "hw:1,8"
        period_time 0
        period_size 1024
        buffer_size 8192
        periods 128
        rate 192000
     }
     bindings {
        0 0
        1 1
     }
}

Aplay:

Kod:

card 1: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 7: HDMI 1 [HDMI 1]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 8: HDMI 2 [HDMI 2]
  Subdevices: 0/1
  Subdevice #0: subdevice #0

Pozdro

Ostatnio edytowany przez Jacekalex (2017-09-07 18:34:20)


W demokracji każdy naród ma taką władzę, na jaką zasługuje ;)
Si vis pacem  para bellum  ;)       |       Pozdrawiam :)

Offline

 

#8  2017-10-13 18:43:25

  seler - Użytkownik

seler
Użytkownik
Zarejestrowany: 2012-05-15

Re: Problem z dźwiękiem przez HDMI

Odinstalowałem pulseaudio i próbuję chociaż cokolwiek ruszyć z alsą, ale nic z tego :/

aplay -l wypluwa:

Kod:

**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC892 Analog [ALC892 Analog]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 1: ALC892 Digital [ALC892 Digital]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 7: HDMI 1 [HDMI 1]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 8: HDMI 2 [HDMI 2]
  Subdevices: 1/1
  Subdevice #0: subdevice #0

aplay -L :

Kod:

null
    Discard all samples (playback) or generate zero samples (capture)
default:CARD=PCH
    HDA Intel PCH, ALC892 Analog
    Default Audio Device
sysdefault:CARD=PCH
    HDA Intel PCH, ALC892 Analog
    Default Audio Device
front:CARD=PCH,DEV=0
    HDA Intel PCH, ALC892 Analog
    Front speakers
surround21:CARD=PCH,DEV=0
    HDA Intel PCH, ALC892 Analog
    2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=PCH,DEV=0
    HDA Intel PCH, ALC892 Analog
    4.0 Surround output to Front and Rear speakers
surround41:CARD=PCH,DEV=0
    HDA Intel PCH, ALC892 Analog
    4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=PCH,DEV=0
    HDA Intel PCH, ALC892 Analog
    5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=PCH,DEV=0
    HDA Intel PCH, ALC892 Analog
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=PCH,DEV=0
    HDA Intel PCH, ALC892 Analog
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=PCH,DEV=0
    HDA Intel PCH, ALC892 Digital
    IEC958 (S/PDIF) Digital Audio Output
hdmi:CARD=PCH,DEV=0
    HDA Intel PCH, HDMI 0
    HDMI Audio Output
hdmi:CARD=PCH,DEV=1
    HDA Intel PCH, HDMI 1
    HDMI Audio Output
hdmi:CARD=PCH,DEV=2
    HDA Intel PCH, HDMI 2
    HDMI Audio Output
dmix:CARD=PCH,DEV=0
    HDA Intel PCH, ALC892 Analog
    Direct sample mixing device
dmix:CARD=PCH,DEV=1
    HDA Intel PCH, ALC892 Digital
    Direct sample mixing device
dmix:CARD=PCH,DEV=3
    HDA Intel PCH, HDMI 0
    Direct sample mixing device
dmix:CARD=PCH,DEV=7
    HDA Intel PCH, HDMI 1
    Direct sample mixing device
dmix:CARD=PCH,DEV=8
    HDA Intel PCH, HDMI 2
    Direct sample mixing device
dsnoop:CARD=PCH,DEV=0
    HDA Intel PCH, ALC892 Analog
    Direct sample snooping device
dsnoop:CARD=PCH,DEV=1
    HDA Intel PCH, ALC892 Digital
    Direct sample snooping device
dsnoop:CARD=PCH,DEV=3
    HDA Intel PCH, HDMI 0
    Direct sample snooping device
dsnoop:CARD=PCH,DEV=7
    HDA Intel PCH, HDMI 1
    Direct sample snooping device
dsnoop:CARD=PCH,DEV=8
    HDA Intel PCH, HDMI 2
    Direct sample snooping device
hw:CARD=PCH,DEV=0
    HDA Intel PCH, ALC892 Analog
    Direct hardware device without any conversions
hw:CARD=PCH,DEV=1
    HDA Intel PCH, ALC892 Digital
    Direct hardware device without any conversions
hw:CARD=PCH,DEV=3
    HDA Intel PCH, HDMI 0
    Direct hardware device without any conversions
hw:CARD=PCH,DEV=7
    HDA Intel PCH, HDMI 1
    Direct hardware device without any conversions
hw:CARD=PCH,DEV=8
    HDA Intel PCH, HDMI 2
    Direct hardware device without any conversions
plughw:CARD=PCH,DEV=0
    HDA Intel PCH, ALC892 Analog
    Hardware device with all software conversions
plughw:CARD=PCH,DEV=1
    HDA Intel PCH, ALC892 Digital
    Hardware device with all software conversions
plughw:CARD=PCH,DEV=3
    HDA Intel PCH, HDMI 0
    Hardware device with all software conversions
plughw:CARD=PCH,DEV=7
    HDA Intel PCH, HDMI 1
    Hardware device with all software conversions
plughw:CARD=PCH,DEV=8
    HDA Intel PCH, HDMI 2
    Hardware device with all software conversions

Próbowałem poleceń
speaker-test -D "$k" -c 6 -l 1, gdzie $k było:
hdmi:CARD=PCH,DEV=0
hdmi:CARD=PCH,DEV=1
hdmi:CARD=PCH,DEV=2
hw:CARD=PCH,DEV=3
hw:CARD=PCH,DEV=7
hw:CARD=PCH,DEV=8
plughw:CARD=PCH,DEV=3
plughw:CARD=PCH,DEV=7
plughw:CARD=PCH,DEV=8
a właściwie to przeleciałem wszystkie nazwy urządzeń wyplute przez aplay -L,
próbowałem odłączać i przyłączać kabel HDMI
i nic - w TV cisza.

Na podłączonych głośnikach przez minijacka dźwięk jest.

Jak można by jakoś ruszyć z tym tematem? Może jednak to jakiś feler tej płyty głównej?


a to feler westchnął seler

Offline

 

#9  2017-10-13 19:06:30

  Jacekalex - Podobno człowiek...;)

Jacekalex
Podobno człowiek...;)
Skąd: /dev/random
Zarejestrowany: 2008-01-07

Re: Problem z dźwiękiem przez HDMI

Spróbuj:

Kod:

speaker-test -c2 -t wav -D hw:1,8

Kod:

speaker-test -c2 -t wav -D hw:1,7

Kod:

speaker-test -c2 -t wav -D hw:1,3

Może któryś zaskoczy.

Poza tym czy jakiś inny system dał dźwięk  na tym HDMI?


W demokracji każdy naród ma taką władzę, na jaką zasługuje ;)
Si vis pacem  para bellum  ;)       |       Pozdrawiam :)

Offline

 

#10  2017-10-13 19:18:21

  seler - Użytkownik

seler
Użytkownik
Zarejestrowany: 2012-05-15

Re: Problem z dźwiękiem przez HDMI

Sprawdziłem twoje polecenia - końcówka powinna być chyba hw: 0,3 0,7 0,8, nie? Używając 1,[378] wyskakuje błąd.
I na 0,3 0,7 0,8 i na 1,3 1,7 1,8 - cisza.

Żadne moje próby po odinstalowaniu pulseaudio nie dały żadnego dźwięku przez HDMI.


a to feler westchnął seler

Offline

 

#11  2017-10-13 19:20:58

  Jacekalex - Podobno człowiek...;)

Jacekalex
Podobno człowiek...;)
Skąd: /dev/random
Zarejestrowany: 2008-01-07

Re: Problem z dźwiękiem przez HDMI

faktycznie, U cie4bie powinny być 0,8 nie 1,8.

W dmesg o karcie nic ciekawego nie widać?
Na innym jaju, np Aptosida próbowałeś?


W demokracji każdy naród ma taką władzę, na jaką zasługuje ;)
Si vis pacem  para bellum  ;)       |       Pozdrawiam :)

Offline

 

#12  2017-10-13 19:27:28

  seler - Użytkownik

seler
Użytkownik
Zarejestrowany: 2012-05-15

Re: Problem z dźwiękiem przez HDMI

Na temat audio znalazłem takie coś:

Kod:

[    4.643107] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    4.679297] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
[    4.679301] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    4.679303] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    4.679304] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    4.679305] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x1e/0x0
[    4.679306] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    4.679309] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[    4.679310] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[    4.679311] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[    4.711318] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:0e.0/sound/card0/input6
[    4.712185] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:0e.0/sound/card0/input7
[    4.712277] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:0e.0/sound/card0/input8
[    4.712360] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:0e.0/sound/card0/input9
[    4.712450] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:0e.0/sound/card0/input10
[    4.712533] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:0e.0/sound/card0/input11
[    4.712621] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:0e.0/sound/card0/input12
[    4.712706] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:0e.0/sound/card0/input13
[    4.715652] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input14
[    4.715770] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input15
[    4.715882] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input16

cały dmesg:

Kod:

[    0.000000] Linux version 4.9.0-3-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18) ) #1 SMP Debian 4.9.30-2+deb9u5 (2017-09-19)
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.9.0-3-amd64 root=/dev/mapper/systemowe-filesystem ro acpi_enforce_resources=lax quiet
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[    0.000000] x86/fpu: xstate_offset[3]:  576, xstate_sizes[3]:   64
[    0.000000] x86/fpu: xstate_offset[4]:  640, xstate_sizes[4]:   64
[    0.000000] x86/fpu: Enabled xstate features 0x1b, context size is 704 bytes, using 'compacted' format.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009b7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009b800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000010000000-0x0000000012150fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000012151000-0x000000006b4aafff] usable
[    0.000000] BIOS-e820: [mem 0x000000006b4ab000-0x000000006d5cbfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000006d5cc000-0x000000006d6a3fff] usable
[    0.000000] BIOS-e820: [mem 0x000000006d6a4000-0x000000006d9dffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000006d9e0000-0x000000006dddefff] reserved
[    0.000000] BIOS-e820: [mem 0x000000006dddf000-0x000000006e155fff] usable
[    0.000000] BIOS-e820: [mem 0x000000006e156000-0x000000006e156fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000006e157000-0x000000006e180fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000006e181000-0x000000006e756fff] usable
[    0.000000] BIOS-e820: [mem 0x000000006e757000-0x000000006e758fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000006e759000-0x000000006effffff] usable
[    0.000000] BIOS-e820: [mem 0x000000006f000000-0x000000007fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000d0000000-0x00000000d0ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe042000-0x00000000fe044fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe900000-0x00000000fe902fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000037fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 3.0 present.
[    0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./J4205-ITX, BIOS P1.30 04/18/2017
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x380000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-6FFFF write-back
[    0.000000]   70000-7FFFF uncachable
[    0.000000]   80000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask 7FC0000000 write-back
[    0.000000]   1 base 0040000000 mask 7FE0000000 write-back
[    0.000000]   2 base 0060000000 mask 7FF0000000 write-back
[    0.000000]   3 base 006F000000 mask 7FFF000000 uncachable
[    0.000000]   4 base 0100000000 mask 7F00000000 write-back
[    0.000000]   5 base 0200000000 mask 7F00000000 write-back
[    0.000000]   6 base 0300000000 mask 7F80000000 write-back
[    0.000000]   7 base 00FF800000 mask 7FFF800000 write-combining
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: last_pfn = 0x6f000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fcbc0-0x000fcbcf] mapped at [ffff8993800fcbc0]
[    0.000000] Base memory trampoline at [ffff899380095000] 95000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x30af2e000, 0x30af2efff] PGTABLE
[    0.000000] BRK [0x30af2f000, 0x30af2ffff] PGTABLE
[    0.000000] BRK [0x30af30000, 0x30af30fff] PGTABLE
[    0.000000] BRK [0x30af31000, 0x30af31fff] PGTABLE
[    0.000000] BRK [0x30af32000, 0x30af32fff] PGTABLE
[    0.000000] BRK [0x30af33000, 0x30af33fff] PGTABLE
[    0.000000] BRK [0x30af34000, 0x30af34fff] PGTABLE
[    0.000000] BRK [0x30af35000, 0x30af35fff] PGTABLE
[    0.000000] BRK [0x30af36000, 0x30af36fff] PGTABLE
[    0.000000] BRK [0x30af37000, 0x30af37fff] PGTABLE
[    0.000000] BRK [0x30af38000, 0x30af38fff] PGTABLE
[    0.000000] BRK [0x30af39000, 0x30af39fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x35913000-0x36c80fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 0x000000006D9A90C0 0000EC (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x000000006D9B2210 000114 (v06 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x000000006D9A9250 008FB3 (v02 ALASKA A M I    01072009 INTL 20120913)
[    0.000000] ACPI: FACS 0x000000006D9C7080 000040
[    0.000000] ACPI: FPDT 0x000000006D9B2330 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FIDT 0x000000006D9B2380 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 0x000000006D9B2420 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.000000] ACPI: DBG2 0x000000006D9B2460 000072 (v00 INTEL  EDK2     00000003 BRXT 0100000D)
[    0.000000] ACPI: DBGP 0x000000006D9B24E0 000034 (v01 INTEL  EDK2     00000003 BRXT 0100000D)
[    0.000000] ACPI: HPET 0x000000006D9B2520 000038 (v01 INTEL  EDK2     00000003 BRXT 0100000D)
[    0.000000] ACPI: LPIT 0x000000006D9B2560 00005C (v01 INTEL  EDK2     00000003 BRXT 0100000D)
[    0.000000] ACPI: APIC 0x000000006D9B25C0 000084 (v03 INTEL  EDK2     00000003 BRXT 0100000D)
[    0.000000] ACPI: NPKT 0x000000006D9B2650 000065 (v01 INTEL  EDK2     00000003 BRXT 0100000D)
[    0.000000] ACPI: PRAM 0x000000006D9B26C0 000030 (v01 INTEL  EDK2     00000003 BRXT 0100000D)
[    0.000000] ACPI: WSMT 0x000000006D9B26F0 000028 (v00 INTEL  EDK2     00000003 BRXT 0100000D)
[    0.000000] ACPI: SSDT 0x000000006D9B2720 000B53 (v02 INTEL  UsbCTabl 00000003 BRXT 0100000D)
[    0.000000] ACPI: SSDT 0x000000006D9B3280 0016E9 (v01 Intel_ Platform 00001000 INTL 20120913)
[    0.000000] ACPI: AAFT 0x000000006D9B4970 0002DA (v01 ALASKA OEMAAFT  01072009 MSFT 00000097)
[    0.000000] ACPI: SSDT 0x000000006D9B4C50 0004A5 (v02 PmRef  Cpu0Ist  00003000 INTL 20120913)
[    0.000000] ACPI: SSDT 0x000000006D9B5100 00072B (v02 CpuRef CpuSsdt  00003000 INTL 20120913)
[    0.000000] ACPI: SSDT 0x000000006D9B5830 00032D (v02 PmRef  Cpu0Tst  00003000 INTL 20120913)
[    0.000000] ACPI: SSDT 0x000000006D9B5B60 00017C (v02 PmRef  ApTst    00003000 INTL 20120913)
[    0.000000] ACPI: SSDT 0x000000006D9B5CE0 002760 (v02 SaSsdt SaSsdt   00003000 INTL 20120913)
[    0.000000] ACPI: UEFI 0x000000006D9B8440 000042 (v01 ALASKA A M I    00000000      00000000)
[    0.000000] ACPI: TPM2 0x000000006D9B8490 000034 (v03        Tpm2Tabl 00000001 AMI  00000000)
[    0.000000] ACPI: DMAR 0x000000006D9B84D0 0000A8 (v01 INTEL  EDK2     00000003 BRXT 0100000D)
[    0.000000] ACPI: WDAT 0x000000006D9B8580 000104 (v01                 00000000      00000000)
[    0.000000] ACPI: NHLT 0x000000006D9B8690 001A50 (v00 INTEL  EDK2     00000002      01000013)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000037fffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x37fffb000-0x37fffffff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000037fffffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009afff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000000fffffff]
[    0.000000]   node   0: [mem 0x0000000012151000-0x000000006b4aafff]
[    0.000000]   node   0: [mem 0x000000006d5cc000-0x000000006d6a3fff]
[    0.000000]   node   0: [mem 0x000000006dddf000-0x000000006e155fff]
[    0.000000]   node   0: [mem 0x000000006e181000-0x000000006e756fff]
[    0.000000]   node   0: [mem 0x000000006e759000-0x000000006effffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000037fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000037fffffff]
[    0.000000] On node 0 totalpages: 3057088
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3994 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 6745 pages used for memmap
[    0.000000]   DMA32 zone: 431654 pages, LIFO batch:31
[    0.000000]   Normal zone: 40960 pages used for memmap
[    0.000000]   Normal zone: 2621440 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at 0x0000000070000000-0x000000007fffffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-119
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009b000-0x0009bfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009c000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x10000000-0x12150fff]
[    0.000000] PM: Registered nosave memory: [mem 0x6b4ab000-0x6d5cbfff]
[    0.000000] PM: Registered nosave memory: [mem 0x6d6a4000-0x6d9dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x6d9e0000-0x6dddefff]
[    0.000000] PM: Registered nosave memory: [mem 0x6e156000-0x6e156fff]
[    0.000000] PM: Registered nosave memory: [mem 0x6e157000-0x6e180fff]
[    0.000000] PM: Registered nosave memory: [mem 0x6e757000-0x6e758fff]
[    0.000000] PM: Registered nosave memory: [mem 0x6f000000-0x7fffffff]
[    0.000000] PM: Registered nosave memory: [mem 0x80000000-0xcfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xd0ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xd1000000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfe041fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe042000-0xfe044fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe045000-0xfe8fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe900000-0xfe902fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe903000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed01fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed02000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff7fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff800000-0xffffffff]
[    0.000000] e820: [mem 0x80000000-0xcfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 35 pages/cpu @ffff8996ffc00000 s103512 r8192 d31656 u524288
[    0.000000] pcpu-alloc: s103512 r8192 d31656 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 3009298
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.9.0-3-amd64 root=/dev/mapper/systemowe-filesystem ro acpi_enforce_resources=lax quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 11933672K/12228352K available (6188K kernel code, 1137K rwdata, 2856K rodata, 1392K init, 688K bss, 294680K reserved, 0K cma-reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000]     Build-time adjustment of leaf fanout to 64.
[    0.000000]     RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[    0.000000] NR_IRQS:33024 nr_irqs:1024 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 99544814920 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: PIT calibration matches HPET. 1 loops
[    0.000000] tsc: Detected 1497.623 MHz processor
[    0.000090] Calibrating delay loop (skipped), value calculated using timer frequency.. 2995.20 BogoMIPS (lpj=5990400)
[    0.000095] pid_max: default: 32768 minimum: 301
[    0.000130] ACPI: Core revision 20160831
[    0.017571] ACPI: 8 ACPI AML tables successfully acquired and loaded
[    0.017689] Security Framework initialized
[    0.017692] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.017702] AppArmor: AppArmor disabled by boot time parameter
[    0.019435] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.026561] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.029763] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.029795] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.030482] CPU: Physical Processor ID: 0
[    0.030485] CPU: Processor Core ID: 0
[    0.030508] mce: CPU supports 7 MCE banks
[    0.030563] CPU0: Thermal monitoring enabled (TM1)
[    0.030641] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
[    0.030642] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.033450] Freeing SMP alternatives memory: 24K (ffffffffa427a000 - ffffffffa4280000)
[    0.044910] ftrace: allocating 25180 entries in 99 pages
[    0.097264] smpboot: Max logical packages: 1
[    0.097276] DMAR: Host address width 39
[    0.097278] DMAR: DRHD base: 0x000000fed64000 flags: 0x0
[    0.097298] DMAR: dmar0: reg_base_addr fed64000 ver 1:0 cap 1c0000c40660462 ecap 7e3ff0505e
[    0.097300] DMAR: DRHD base: 0x000000fed65000 flags: 0x1
[    0.097311] DMAR: dmar1: reg_base_addr fed65000 ver 1:0 cap d2008c40660462 ecap f050da
[    0.097314] DMAR: RMRR base: 0x0000006d591000 end: 0x0000006d5b0fff
[    0.097316] DMAR: RMRR base: 0x0000006f800000 end: 0x0000007fffffff
[    0.097320] DMAR-IR: IOAPIC id 1 under DRHD base  0xfed65000 IOMMU 1
[    0.097321] DMAR-IR: HPET id 0 under DRHD base 0xfed65000
[    0.097323] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.099402] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.099405] x2apic enabled
[    0.099421] Switched APIC routing to cluster x2apic.
[    0.104129] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.143834] TSC deadline timer enabled
[    0.143844] smpboot: CPU0: Intel(R) Pentium(R) CPU J4205 @ 1.50GHz (family: 0x6, model: 0x5c, stepping: 0x9)
[    0.143851] Performance Events: PEBS fmt3+, Goldmont events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.143877] ... version:                4
[    0.143878] ... bit width:              48
[    0.143879] ... generic registers:      4
[    0.143880] ... value mask:             0000ffffffffffff
[    0.143881] ... max period:             00007fffffffffff
[    0.143882] ... fixed-purpose events:   3
[    0.143883] ... event mask:             000000070000000f
[    0.145162] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.145449] x86: Booting SMP configuration:
[    0.145451] .... node  #0, CPUs:      #1 #2 #3
[    0.386106] x86: Booted up 1 node, 4 CPUs
[    0.386109] smpboot: Total of 4 processors activated (11984.80 BogoMIPS)
[    0.389149] devtmpfs: initialized
[    0.389289] x86/mm: Memory block size: 128MB
[    0.396169] PM: Registering ACPI NVS region [mem 0x6d6a4000-0x6d9dffff] (3391488 bytes)
[    0.396358] PM: Registering ACPI NVS region [mem 0x6e156000-0x6e156fff] (4096 bytes)
[    0.396463] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.396479] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.396589] pinctrl core: initialized pinctrl subsystem
[    0.400088] NET: Registered protocol family 16
[    0.412048] cpuidle: using governor ladder
[    0.428068] cpuidle: using governor menu
[    0.428203] ACPI: bus type PCI registered
[    0.428205] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.428358] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.428362] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.428395] PCI: Using configuration type 1 for base access
[    0.429169] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.429170] mtrr: probably your BIOS does not setup all CPUs.
[    0.429171] mtrr: corrected configuration.
[    0.444445] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[    0.444447] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.445009] ACPI: Added _OSI(Module Device)
[    0.445011] ACPI: Added _OSI(Processor Device)
[    0.445012] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.445014] ACPI: Added _OSI(Processor Aggregator Device)
[    0.445589] ACPI: Executed 3 blocks of module-level executable AML code
[    0.457899] ACPI: Dynamic OEM Table Load:
[    0.457910] ACPI: SSDT 0xFFFF8996F106DC00 000102 (v02 PmRef  Cpu0Cst  00003001 INTL 20120913)
[    0.458645] ACPI: Dynamic OEM Table Load:
[    0.458654] ACPI: SSDT 0xFFFF8996F106D800 00015F (v02 PmRef  ApIst    00003000 INTL 20120913)
[    0.459060] ACPI: Dynamic OEM Table Load:
[    0.459068] ACPI: SSDT 0xFFFF8996F10740C0 00008D (v02 PmRef  ApCst    00003000 INTL 20120913)
[    0.461397] ACPI: Interpreter enabled
[    0.461445] ACPI: (supports S0 S3 S4 S5)
[    0.461447] ACPI: Using IOAPIC for interrupt routing
[    0.461600] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.483211] ACPI: Power Resource [FN00] (on)
[    0.484708] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.484719] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.486098] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.487515] PCI host bridge to bus 0000:00
[    0.487519] pci_bus 0000:00: root bus resource [io  0x0070-0x0077]
[    0.487522] pci_bus 0000:00: root bus resource [io  0x0000-0x006f window]
[    0.487524] pci_bus 0000:00: root bus resource [io  0x0078-0x0cf7 window]
[    0.487527] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.487529] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.487532] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.487534] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
[    0.487537] pci_bus 0000:00: root bus resource [mem 0x70000001-0x7fffffff window]
[    0.487539] pci_bus 0000:00: root bus resource [mem 0x6f800001-0x6fffffff window]
[    0.487541] pci_bus 0000:00: root bus resource [mem 0x80000000-0xcfffffff window]
[    0.487544] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff window]
[    0.487547] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.487563] pci 0000:00:00.0: [8086:5af0] type 00 class 0x060000
[    0.488112] pci 0000:00:02.0: [8086:5a84] type 00 class 0x030000
[    0.488130] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x90ffffff 64bit]
[    0.488150] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref]
[    0.488159] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.488741] pci 0000:00:0e.0: [8086:5a98] type 00 class 0x040300
[    0.488766] pci 0000:00:0e.0: reg 0x10: [mem 0x91310000-0x91313fff 64bit]
[    0.488796] pci 0000:00:0e.0: reg 0x20: [mem 0x91000000-0x910fffff 64bit]
[    0.488868] pci 0000:00:0e.0: PME# supported from D0 D3hot D3cold
[    0.489363] pci 0000:00:0e.0: System wakeup disabled by ACPI
[    0.489457] pci 0000:00:0f.0: [8086:5a9a] type 00 class 0x078000
[    0.489495] pci 0000:00:0f.0: reg 0x10: [mem 0x9131b000-0x9131bfff 64bit]
[    0.489626] pci 0000:00:0f.0: PME# supported from D3hot
[    0.490103] pci 0000:00:12.0: [8086:5ae3] type 00 class 0x010601
[    0.490124] pci 0000:00:12.0: reg 0x10: [mem 0x91314000-0x91315fff]
[    0.490134] pci 0000:00:12.0: reg 0x14: [mem 0x91318000-0x913180ff]
[    0.490144] pci 0000:00:12.0: reg 0x18: [io  0xf090-0xf097]
[    0.490154] pci 0000:00:12.0: reg 0x1c: [io  0xf080-0xf083]
[    0.490165] pci 0000:00:12.0: reg 0x20: [io  0xf060-0xf07f]
[    0.490175] pci 0000:00:12.0: reg 0x24: [mem 0x91317000-0x913177ff]
[    0.490229] pci 0000:00:12.0: PME# supported from D3hot
[    0.490672] pci 0000:00:13.0: [8086:5ad8] type 01 class 0x060400
[    0.490764] pci 0000:00:13.0: PME# supported from D0 D3hot D3cold
[    0.491143] pci 0000:00:13.0: System wakeup disabled by ACPI
[    0.491223] pci 0000:00:13.1: [8086:5ad9] type 01 class 0x060400
[    0.491312] pci 0000:00:13.1: PME# supported from D0 D3hot D3cold
[    0.491691] pci 0000:00:13.1: System wakeup disabled by ACPI
[    0.491774] pci 0000:00:13.2: [8086:5ada] type 01 class 0x060400
[    0.491865] pci 0000:00:13.2: PME# supported from D0 D3hot D3cold
[    0.492252] pci 0000:00:13.2: System wakeup disabled by ACPI
[    0.492332] pci 0000:00:13.3: [8086:5adb] type 01 class 0x060400
[    0.492423] pci 0000:00:13.3: PME# supported from D0 D3hot D3cold
[    0.492802] pci 0000:00:13.3: System wakeup disabled by ACPI
[    0.492903] pci 0000:00:15.0: [8086:5aa8] type 00 class 0x0c0330
[    0.492930] pci 0000:00:15.0: reg 0x10: [mem 0x91300000-0x9130ffff 64bit]
[    0.493018] pci 0000:00:15.0: PME# supported from D3hot D3cold
[    0.493408] pci 0000:00:15.0: System wakeup disabled by ACPI
[    0.493551] pci 0000:00:1f.0: [8086:5ae8] type 00 class 0x060100
[    0.494123] pci 0000:00:1f.1: [8086:5ad4] type 00 class 0x0c0500
[    0.494181] pci 0000:00:1f.1: reg 0x10: [mem 0x91316000-0x913160ff 64bit]
[    0.494260] pci 0000:00:1f.1: reg 0x20: [io  0xf040-0xf05f]
[    0.494899] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
[    0.494925] pci 0000:01:00.0: reg 0x10: [io  0xe000-0xe0ff]
[    0.494964] pci 0000:01:00.0: reg 0x18: [mem 0x91204000-0x91204fff 64bit]
[    0.494987] pci 0000:01:00.0: reg 0x20: [mem 0x91200000-0x91203fff 64bit pref]
[    0.495010] pci 0000:01:00.0: can't set Max Payload Size to 256; if necessary, use "pci=pcie_bus_safe" and report a bug
[    0.495115] pci 0000:01:00.0: supports D1 D2
[    0.495117] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.495196] pci 0000:01:00.0: System wakeup disabled by ACPI
[    0.504207] pci 0000:00:13.0: PCI bridge to [bus 01]
[    0.504215] pci 0000:00:13.0:   bridge window [io  0xe000-0xefff]
[    0.504241] pci 0000:00:13.0:   bridge window [mem 0x91200000-0x912fffff]
[    0.504342] pci 0000:00:13.1: PCI bridge to [bus 02]
[    0.504465] pci 0000:03:00.0: [1b21:0612] type 00 class 0x010601
[    0.504490] pci 0000:03:00.0: reg 0x10: [io  0xd050-0xd057]
[    0.504503] pci 0000:03:00.0: reg 0x14: [io  0xd040-0xd043]
[    0.504516] pci 0000:03:00.0: reg 0x18: [io  0xd030-0xd037]
[    0.504531] pci 0000:03:00.0: reg 0x1c: [io  0xd020-0xd023]
[    0.504543] pci 0000:03:00.0: reg 0x20: [io  0xd000-0xd01f]
[    0.504558] pci 0000:03:00.0: reg 0x24: [mem 0x91100000-0x911001ff]
[    0.504698] pci 0000:03:00.0: System wakeup disabled by ACPI
[    0.516214] pci 0000:00:13.2: PCI bridge to [bus 03]
[    0.516222] pci 0000:00:13.2:   bridge window [io  0xd000-0xdfff]
[    0.516230] pci 0000:00:13.2:   bridge window [mem 0x91100000-0x911fffff]
[    0.516355] pci 0000:00:13.3: PCI bridge to [bus 04]
[    0.518476] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
[    0.518610] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
[    0.518740] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
[    0.518870] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
[    0.518999] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
[    0.519133] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
[    0.519262] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
[    0.519391] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
[    0.524784] ACPI: Enabled 4 GPEs in block 00 to 7F
[    0.525150] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.525153] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.525158] vgaarb: loaded
[    0.525160] vgaarb: bridge control possible 0000:00:02.0
[    0.525329] PCI: Using ACPI for IRQ routing
[    0.553507] PCI: pci_cache_line_size set to 64 bytes
[    0.553586] e820: reserve RAM buffer [mem 0x0009b800-0x0009ffff]
[    0.553589] e820: reserve RAM buffer [mem 0x6b4ab000-0x6bffffff]
[    0.553590] e820: reserve RAM buffer [mem 0x6d6a4000-0x6fffffff]
[    0.553593] e820: reserve RAM buffer [mem 0x6e156000-0x6fffffff]
[    0.553595] e820: reserve RAM buffer [mem 0x6e757000-0x6fffffff]
[    0.553596] e820: reserve RAM buffer [mem 0x6f000000-0x6fffffff]
[    0.553950] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.553961] hpet0: 8 comparators, 64-bit 19.200000 MHz counter
[    0.556022] clocksource: Switched to clocksource hpet
[    0.570476] VFS: Disk quotas dquot_6.6.0
[    0.570528] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.570716] pnp: PnP ACPI init
[    0.571255] system 00:00: [io  0x0280-0x028f] has been reserved
[    0.571258] system 00:00: [io  0x0290-0x029f] has been reserved
[    0.571261] system 00:00: [io  0x02a0-0x02af] has been reserved
[    0.571268] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.571734] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.572712] system 00:02: [io  0x0680-0x069f] has been reserved
[    0.572715] system 00:02: [io  0x0400-0x047f] has been reserved
[    0.572718] system 00:02: [io  0x0500-0x05fe] has been reserved
[    0.572722] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.573405] system 00:03: [mem 0xe0000000-0xefffffff] has been reserved
[    0.573408] system 00:03: [mem 0xfea00000-0xfeafffff] has been reserved
[    0.573411] system 00:03: [mem 0xfed01000-0xfed01fff] has been reserved
[    0.573414] system 00:03: [mem 0xfed03000-0xfed03fff] has been reserved
[    0.573417] system 00:03: [mem 0xfed06000-0xfed06fff] has been reserved
[    0.573420] system 00:03: [mem 0xfed08000-0xfed09fff] has been reserved
[    0.573423] system 00:03: [mem 0xfed80000-0xfedbffff] has been reserved
[    0.573426] system 00:03: [mem 0xfed1c000-0xfed1cfff] has been reserved
[    0.573429] system 00:03: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.573434] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.573721] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.574030] pnp: PnP ACPI: found 5 devices
[    0.584865] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.584912] pci 0000:00:13.0: PCI bridge to [bus 01]
[    0.584916] pci 0000:00:13.0:   bridge window [io  0xe000-0xefff]
[    0.584922] pci 0000:00:13.0:   bridge window [mem 0x91200000-0x912fffff]
[    0.584932] pci 0000:00:13.1: PCI bridge to [bus 02]
[    0.584944] pci 0000:00:13.2: PCI bridge to [bus 03]
[    0.584948] pci 0000:00:13.2:   bridge window [io  0xd000-0xdfff]
[    0.584953] pci 0000:00:13.2:   bridge window [mem 0x91100000-0x911fffff]
[    0.584962] pci 0000:00:13.3: PCI bridge to [bus 04]
[    0.584973] pci_bus 0000:00: resource 4 [io  0x0070-0x0077]
[    0.584976] pci_bus 0000:00: resource 5 [io  0x0000-0x006f window]
[    0.584979] pci_bus 0000:00: resource 6 [io  0x0078-0x0cf7 window]
[    0.584981] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    0.584983] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.584986] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[    0.584988] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window]
[    0.584991] pci_bus 0000:00: resource 11 [mem 0x70000001-0x7fffffff window]
[    0.584993] pci_bus 0000:00: resource 12 [mem 0x6f800001-0x6fffffff window]
[    0.584995] pci_bus 0000:00: resource 13 [mem 0x80000000-0xcfffffff window]
[    0.584998] pci_bus 0000:00: resource 14 [mem 0xe0000000-0xefffffff window]
[    0.585001] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.585003] pci_bus 0000:01: resource 1 [mem 0x91200000-0x912fffff]
[    0.585006] pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
[    0.585008] pci_bus 0000:03: resource 1 [mem 0x91100000-0x911fffff]
[    0.585304] NET: Registered protocol family 2
[    0.585718] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.586407] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.586930] TCP: Hash tables configured (established 131072 bind 65536)
[    0.587015] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    0.587226] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    0.587535] NET: Registered protocol family 1
[    0.587566] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.588163] PCI: CLS 0 bytes, default 64
[    0.588260] Unpacking initramfs...
[    1.251944] Freeing initrd memory: 19896K (ffff8993b5913000 - ffff8993b6c81000)
[    1.252104] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.252108] software IO TLB [mem 0x674ab000-0x6b4ab000] (64MB) mapped at [ffff8993e74ab000-ffff8993eb4aafff]
[    1.252911] audit: initializing netlink subsys (disabled)
[    1.252956] audit: type=2000 audit(1507901496.219:1): initialized
[    1.253871] workingset: timestamp_bits=40 max_order=22 bucket_order=0
[    1.254005] zbud: loaded
[    1.256015] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    1.256151] io scheduler noop registered
[    1.256153] io scheduler deadline registered
[    1.256191] io scheduler cfq registered (default)
[    1.257802] pcieport 0000:00:13.0: Signaling PME through PCIe PME interrupt
[    1.257806] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[    1.257810] pcie_pme 0000:00:13.0:pcie001: service driver pcie_pme loaded
[    1.257839] pcieport 0000:00:13.1: Signaling PME through PCIe PME interrupt
[    1.257843] pcie_pme 0000:00:13.1:pcie001: service driver pcie_pme loaded
[    1.257875] pcieport 0000:00:13.2: Signaling PME through PCIe PME interrupt
[    1.257877] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[    1.257882] pcie_pme 0000:00:13.2:pcie001: service driver pcie_pme loaded
[    1.257911] pcieport 0000:00:13.3: Signaling PME through PCIe PME interrupt
[    1.257915] pcie_pme 0000:00:13.3:pcie001: service driver pcie_pme loaded
[    1.257933] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.257942] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.257974] intel_idle: MWAIT substates: 0x11242020
[    1.257976] intel_idle: v0.4.1 model 0x5C
[    1.258452] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.261079] GHES: HEST is not enabled!
[    1.261202] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.262293] Linux agpgart interface v0.103
[    1.262424] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    1.262425] AMD IOMMUv2 functionality not available on this system
[    1.263068] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    1.266463] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.266477] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.266709] mousedev: PS/2 mouse device common for all mice
[    1.266779] rtc_cmos 00:04: RTC can wake from S4
[    1.267278] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    1.267383] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.267412] intel_pstate: Intel P-state driver initializing
[    1.268142] ledtrig-cpu: registered to indicate activity on CPUs
[    1.269039] NET: Registered protocol family 10
[    1.269899] mip6: Mobile IPv6
[    1.269904] NET: Registered protocol family 17
[    1.269911] mpls_gso: MPLS GSO support
[    1.270792] microcode: sig=0x506c9, pf=0x1, revision=0x1e
[    1.271154] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.271938] registered taskstats version 1
[    1.271985] zswap: loaded using pool lzo/zbud
[    1.272725] ima: No TPM chip found, activating TPM-bypass!
[    1.273862] rtc_cmos 00:04: setting system clock to 2017-10-13 13:31:37 UTC (1507901497)
[    1.274157] PM: Hibernation image not present or could not be loaded.
[    1.279277] Freeing unused kernel memory: 1392K (ffffffffa411e000 - ffffffffa427a000)
[    1.279282] Write protecting the kernel read-only data: 12288k
[    1.280576] Freeing unused kernel memory: 1988K (ffff89968a60f000 - ffff89968a800000)
[    1.284551] Freeing unused kernel memory: 1240K (ffff89968aaca000 - ffff89968ac00000)
[    1.292873] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.315922] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.316094] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.316111] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.316130] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.317895] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.317963] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.319943] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.320080] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.320219] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.320321] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.366303] hidraw: raw HID events driver (C) Jiri Kosina
[    1.375469] thermal LNXTHERM:00: registered as thermal_zone0
[    1.375471] ACPI: Thermal Zone [TZ01] (44 C)
[    1.376735] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.378844] SCSI subsystem initialized
[    1.379414] i801_smbus 0000:00:1f.1: can't derive routing for PCI INT A
[    1.379416] i801_smbus 0000:00:1f.1: PCI INT A: not connected
[    1.379441] i801_smbus 0000:00:1f.1: SPD Write Disable is set
[    1.379463] i801_smbus 0000:00:1f.1: Failed to allocate irq -2147483648: -107
[    1.379533] i801_smbus 0000:00:1f.1: SMBus using polling
[    1.382658] libata version 3.00 loaded.
[    1.383025] ACPI: bus type USB registered
[    1.383067] usbcore: registered new interface driver usbfs
[    1.383079] usbcore: registered new interface driver hub
[    1.383770] ahci 0000:00:12.0: version 3.0
[    1.384153] ahci 0000:00:12.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    1.384156] ahci 0000:00:12.0: flags: 64bit ncq sntf clo only pmp pio slum part deso sadm sds apst 
[    1.385279] usbcore: registered new device driver usb
[    1.385532] scsi host0: ahci
[    1.385957] scsi host1: ahci
[    1.386043] ata1: SATA max UDMA/133 abar m2048@0x91317000 port 0x91317100 irq 371
[    1.386046] ata2: SATA max UDMA/133 abar m2048@0x91317000 port 0x91317180 irq 371
[    1.386313] ahci 0000:03:00.0: SSS flag set, parallel bus scan disabled
[    1.386343] ahci 0000:03:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    1.386346] ahci 0000:03:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc 
[    1.387038] scsi host2: ahci
[    1.387328] scsi host3: ahci
[    1.387406] ata3: SATA max UDMA/133 abar m512@0x91100000 port 0x91100100 irq 372
[    1.387408] ata4: SATA max UDMA/133 abar m512@0x91100000 port 0x91100180 irq 372
[    1.388119] xhci_hcd 0000:00:15.0: xHCI Host Controller
[    1.388128] xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 1
[    1.389254] xhci_hcd 0000:00:15.0: hcc params 0x200077c1 hci version 0x100 quirks 0x01109810
[    1.389260] xhci_hcd 0000:00:15.0: cache line size of 64 is not supported
[    1.389390] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.389392] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.389393] usb usb1: Product: xHCI Host Controller
[    1.389395] usb usb1: Manufacturer: Linux 4.9.0-3-amd64 xhci-hcd
[    1.389396] usb usb1: SerialNumber: 0000:00:15.0
[    1.389700] hub 1-0:1.0: USB hub found
[    1.389717] hub 1-0:1.0: 8 ports detected
[    1.389908] SSE version of gcm_enc/dec engaged.
[    1.392153] xhci_hcd 0000:00:15.0: xHCI Host Controller
[    1.392160] xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 2
[    1.392223] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    1.392225] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.392227] usb usb2: Product: xHCI Host Controller
[    1.392228] usb usb2: Manufacturer: Linux 4.9.0-3-amd64 xhci-hcd
[    1.392229] usb usb2: SerialNumber: 0000:00:15.0
[    1.393116] r8169 0000:01:00.0 eth0: RTL8168g/8111g at 0xffffb768418f9000, 70:85:c2:21:0f:2d, XID 0c000800 IRQ 374
[    1.393119] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.393151] hub 2-0:1.0: USB hub found
[    1.393167] hub 2-0:1.0: 7 ports detected
[    1.424110] r8169 0000:01:00.0 enp1s0: renamed from eth0
[    1.716143] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[    1.858604] usb 1-1: New USB device found, idVendor=0930, idProduct=6544
[    1.858609] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.858613] usb 1-1: Product: USB Flash Memory
[    1.858617] usb 1-1: Manufacturer:         
[    1.858620] usb 1-1: SerialNumber: C412F52D6C82CFC17003E848
[    1.860149] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.860976] ata1.00: ATA-9: WDC WD30EFRX-68EUZN0, 82.00A82, max UDMA/133
[    1.860982] ata1.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.861865] ata1.00: configured for UDMA/133
[    1.862658] scsi 0:0:0:0: Direct-Access     ATA      WDC WD30EFRX-68E 0A82 PQ: 0 ANSI: 5
[    1.864119] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.864348] ata3.00: ATA-9: GOODRAM, SAFM12.2, max UDMA/133
[    1.864354] ata3.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.864525] ata3.00: configured for UDMA/133
[    1.864531] usb-storage 1-1:1.0: USB Mass Storage device detected
[    1.865171] scsi host4: usb-storage 1-1:1.0
[    1.865438] usbcore: registered new interface driver usb-storage
[    1.866816] usbcore: registered new interface driver uas
[    1.868115] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.868819] ata2.00: ATA-9: WDC WD30EFRX-68EUZN0, 82.00A82, max UDMA/133
[    1.868823] ata2.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.869495] ata2.00: configured for UDMA/133
[    1.913274] scsi 1:0:0:0: Direct-Access     ATA      WDC WD30EFRX-68E 0A82 PQ: 0 ANSI: 5
[    1.915019] sd 0:0:0:0: [sda] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
[    1.915025] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.915184] sd 0:0:0:0: [sda] Write Protect is off
[    1.915189] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.915260] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.956670] sd 1:0:0:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
[    1.956677] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[    1.957105] sd 1:0:0:0: [sdb] Write Protect is off
[    1.957113] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.957352] scsi 2:0:0:0: Direct-Access     ATA      GOODRAM          12.2 PQ: 0 ANSI: 5
[    1.957367] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.982990]  sda: sda1 sda9
[    1.984319] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.000710] sd 2:0:0:0: [sdc] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[    2.000877] sd 2:0:0:0: [sdc] Write Protect is off
[    2.000884] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    2.000937] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.002050]  sdc: sdc1 sdc2
[    2.003269] sd 2:0:0:0: [sdc] Attached SCSI disk
[    2.020955]  sdb: sdb1 sdb9
[    2.022199] sd 1:0:0:0: [sdb] Attached SCSI disk
[    2.272144] tsc: Refined TSC clocksource calibration: 1497.600 MHz
[    2.272166] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x159647815e3, max_idle_ns: 440795269835 ns
[    2.316397] ata4: SATA link down (SStatus 0 SControl 300)
[    2.361759] random: fast init done
[    2.488737] device-mapper: uevent: version 1.0.3
[    2.488873] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[    2.703817] PM: Starting manual resume from disk
[    2.703823] PM: Hibernation image partition 254:0 present
[    2.703825] PM: Looking for hibernation image.
[    2.704139] PM: Image not found (code -22)
[    2.704140] PM: Hibernation image not present or could not be loaded.
[    2.794903] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
[    2.907429] scsi 4:0:0:0: Direct-Access              USB Flash Memory 1.00 PQ: 0 ANSI: 4
[    2.908444] sd 4:0:0:0: [sdd] 15155200 512-byte logical blocks: (7.76 GB/7.23 GiB)
[    2.908674] sd 4:0:0:0: [sdd] Write Protect is off
[    2.908677] sd 4:0:0:0: [sdd] Mode Sense: 45 00 00 00
[    2.908900] sd 4:0:0:0: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    2.910466]  sdd:
[    2.911425] sd 4:0:0:0: [sdd] Attached SCSI removable disk
[    2.975176] ip_tables: (C) 2000-2006 Netfilter Core Team
[    2.984633] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    2.984874] systemd[1]: Detected architecture x86-64.
[    2.988961] systemd[1]: Set hostname to <server-j4205>.
[    3.155079] systemd[1]: minissdpd.service: Cannot add dependency job, ignoring: Unit minissdpd.service is masked.
[    3.157347] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    3.157679] systemd[1]: Created slice User and Session Slice.
[    3.157806] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    3.157989] systemd[1]: Listening on Journal Audit Socket.
[    3.158366] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    3.158520] systemd[1]: Listening on fsck to fsckd communication Socket.
[    3.188886] EXT4-fs (dm-3): re-mounted. Opts: errors=remount-ro
[    3.207361] lp: driver loaded but no devices found
[    3.212440] ppdev: user-space parallel port driver
[    3.214291] parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
[    3.214315] parport0: irq 7 detected
[    3.296318] clocksource: Switched to clocksource tsc
[    3.308252] lp0: using parport0 (polling).
[    3.314949] nct6775: Found NCT6793D or compatible chip at 0x2e:0x290
[    3.397381] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[    3.397386] ACPI: Power Button [PWRB]
[    3.449757] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    3.451750] tpm_crb MSFT0101:00: can't request region for resource [mem 0xfed40080-0xfed40fff]
[    3.451829] tpm_crb: probe of MSFT0101:00 failed with error -16
[    3.453599] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    3.453686] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    3.454575] sd 2:0:0:0: Attached scsi generic sg2 type 0
[    3.455129] sd 4:0:0:0: Attached scsi generic sg3 type 0
[    3.461233] random: crng init done
[    3.462644] [drm] Initialized
[    3.493702] input: PC Speaker as /devices/platform/pcspkr/input/input4
[    3.498629] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[    3.498632] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    3.498632] RAPL PMU: hw unit of domain package 2^-14 Joules
[    3.498633] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    3.498634] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    3.516120] [drm] Memory usable by graphics device = 4096M
[    3.516220] [drm] Replacing VGA console driver
[    3.517790] Console: switching to colour dummy device 80x25
[    3.518920] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    3.518922] [drm] Driver supports precise vblank timestamp query.
[    3.521692] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    3.526682] i915 0000:00:02.0: firmware: direct-loading firmware i915/bxt_dmc_ver1_07.bin
[    3.526921] [drm] Finished loading i915/bxt_dmc_ver1_07.bin (v1.7)
[    3.558241] intel_rapl: Found RAPL domain package
[    3.558246] intel_rapl: Found RAPL domain core
[    3.558250] intel_rapl: Found RAPL domain uncore
[    3.558253] intel_rapl: Found RAPL domain dram
[    3.616528] spl: loading out-of-tree module taints kernel.
[    3.622675] SPL: Loaded module v0.6.5.9-1
[    3.623953] znvpair: module license 'CDDL' taints kernel.
[    3.623955] Disabling lock debugging due to kernel taint
[    3.627674] Adding 12206076k swap on /dev/mapper/systemowe-swap.  Priority:-1 extents:1 across:12206076k SSFS
[    3.669825] ZFS: Loaded module v0.6.5.9-5, ZFS pool version 5000, ZFS filesystem version 5
[    4.288125] EXT4-fs (sdc1): mounting ext2 file system using the ext4 subsystem
[    4.291515] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[    4.291612] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[    4.294131] EXT4-fs (sdc1): mounted filesystem without journal. Opts: (null)
[    4.311449] systemd-journald[259]: Received request to flush runtime journal from PID 1
[    4.511270] [drm] failed to retrieve link info, disabling eDP
[    4.513082] [drm] GuC firmware load skipped
[    4.516649] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    4.517390] acpi device:10: registered as cooling_device6
[    4.517488] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
[    4.554917] snd_hda_intel 0000:00:0e.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    4.554930] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0
[    4.560763] fbcon: inteldrmfb (fb0) is primary device
[    4.614081] Console: switching to colour frame buffer device 240x67
[    4.643107] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    4.679297] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
[    4.679301] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    4.679303] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    4.679304] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    4.679305] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x1e/0x0
[    4.679306] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    4.679309] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[    4.679310] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[    4.679311] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[    4.711318] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:0e.0/sound/card0/input6
[    4.712185] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:0e.0/sound/card0/input7
[    4.712277] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:0e.0/sound/card0/input8
[    4.712360] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:0e.0/sound/card0/input9
[    4.712450] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:0e.0/sound/card0/input10
[    4.712533] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:0e.0/sound/card0/input11
[    4.712621] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:0e.0/sound/card0/input12
[    4.712706] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:0e.0/sound/card0/input13
[    4.715652] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input14
[    4.715770] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input15
[    4.715882] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input16
[    5.097608] SPL: using hostid 0x007f0101
[    5.824382] [drm] RC6 on
[    9.089538] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
[    9.090763] r8169 0000:01:00.0: firmware: direct-loading firmware rtl_nic/rtl8168g-2.fw
[    9.134591] r8169 0000:01:00.0 enp1s0: link down
[    9.134598] r8169 0000:01:00.0 enp1s0: link down
[    9.134663] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
[   10.143863] fuse init (API version 7.26)
[   11.719662] r8169 0000:01:00.0 enp1s0: link up
[   11.719993] IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready
[  300.426178] mce: [Hardware Error]: Machine check events logged
[  922.013261] snd_hda_intel 0000:00:0e.0: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
[ 5067.223645] traps: panel-7-pulseau[2895] trap int3 ip:7f23a4fa3261 sp:7ffe987172c0 error:0
[ 5067.223670]  in libglib-2.0.so.0.5000.3[7f23a4f53000+112000]
[ 9127.648679] EXT4-fs (dm-2): re-mounted. Opts: (null)
[ 9127.656014] EXT4-fs (dm-1): re-mounted. Opts: (null)
[ 9129.188581] systemd[1]: apt-daily.timer: Adding 8h 8min 42.797761s random time.
[ 9129.387194] systemd[1]: apt-daily.timer: Adding 10h 43min 54.016223s random time.
[ 9130.248734] EXT4-fs (dm-2): re-mounted. Opts: (null)
[ 9130.255805] EXT4-fs (dm-1): re-mounted. Opts: (null)

a to feler westchnął seler

Offline

 

#13  2017-10-13 19:43:02

  Jacekalex - Podobno człowiek...;)

Jacekalex
Podobno człowiek...;)
Skąd: /dev/random
Zarejestrowany: 2008-01-07

Re: Problem z dźwiękiem przez HDMI

Kod:

Linux version 4.9.0-3-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18) ) #1 SMP Debian 4.9.30-2+deb9u5 (2017-09-19)

Zobacz na jaju 4.13 z Aptosida.
np tym:

Kod:

linux-image-4.13.0-6.slh.1-aptosid-amd64

Jest w repo:

Kod:

 apt-cache policy linux-image-4.13.0-6.slh.1-aptosid-amd64
linux-image-4.13.0-6.slh.1-aptosid-amd64:
  Zainstalowana: (brak)
  Kandydująca:   4.13-12
  Tabela wersji:
     4.13-12 500
        500 http://aptosid.com/debian unstable/main amd64 Packages

Ostatnio edytowany przez Jacekalex (2017-10-13 19:48:17)


W demokracji każdy naród ma taką władzę, na jaką zasługuje ;)
Si vis pacem  para bellum  ;)       |       Pozdrawiam :)

Offline

 

#14  2017-10-13 19:55:12

  seler - Użytkownik

seler
Użytkownik
Zarejestrowany: 2012-05-15

Re: Problem z dźwiękiem przez HDMI

Ta instrukcja mi wystarczy?
http://www.linuxportal.pl/wpisy/instalacja-kernela- … anie-id181582

Mam zfsonlinux, raczej nic się nie schrzani, nie?


a to feler westchnął seler

Offline

 

#15  2017-10-13 20:14:48

  Jacekalex - Podobno człowiek...;)

Jacekalex
Podobno człowiek...;)
Skąd: /dev/random
Zarejestrowany: 2008-01-07

Re: Problem z dźwiękiem przez HDMI

seler napisał(-a):

Ta instrukcja mi wystarczy?
http://www.linuxportal.pl/wpisy/instalacja-kernela- … anie-id181582

Mam zfsonlinux, raczej nic się nie schrzani, nie?

ZFSonlinux? diabli wiedzą, nigdy tego na Linuxie nie próbowałem używać na poważnie.

Jak chcesz się bawić ZFS, to polecam OpenBSD.

Instalacja innego kernela?
Dodajesz repo i instalujesz jak każdą normalną paczkę.

Ostatnio edytowany przez Jacekalex (2017-10-13 20:16:17)


W demokracji każdy naród ma taką władzę, na jaką zasługuje ;)
Si vis pacem  para bellum  ;)       |       Pozdrawiam :)

Offline

 

#16  2017-10-13 20:28:04

  seler - Użytkownik

seler
Użytkownik
Zarejestrowany: 2012-05-15

Re: Problem z dźwiękiem przez HDMI

Dodałem do sources.list:
deb http://debian.tu-bs.de/project/aptosid/debian/ sid main fix.main

ale po apt update wywala:

Kod:

# apt update
Ign:1 http://ftp.pl.debian.org/debian stretch InRelease
Stary:2 http://ftp.pl.debian.org/debian stretch Release
Pobieranie:3 http://debian.tu-bs.de/project/aptosid/debian sid InRelease [11,5 kB]
Stary:5 http://security.debian.org/debian-security stretch/updates InRelease    
Błąd:3 http://debian.tu-bs.de/project/aptosid/debian sid InRelease              
  Następujące podpisy nie mogły zostać zweryfikowane z powodu braku klucza publicznego: NO_PUBKEY BFE02D65B1D142ED
Czytanie list pakietów... Gotowe
W: Błąd GPG: http://debian.tu-bs.de/project/aptosid/debian sid InRelease: Następujące podpisy nie mogły zostać zweryfikowane z powodu braku klucza publicznego: NO_PUBKEY BFE02D65B1D142ED
E: The repository 'http://debian.tu-bs.de/project/aptosid/debian sid InRelease' is not signed.
N: Updating from such a repository can't be done securely, and is therefore disabled by default.
N: See apt-secure(8) manpage for repository creation and user configuration details.

Kod:

apt-get install aptosid-archive-keyring
Czytanie list pakietów... Gotowe
Budowanie drzewa zależności       
Odczyt informacji o stanie... Gotowe
E: Nie udało się odnaleźć pakietu aptosid-archive-keyring

EDIT: rozważałem OpenBSD, a raczej FreeBSD, ale raczej by mi tam obsługa wentylatorów nie działała z kolei. A z mojego riserczu wynikło, że ZFSonLinux to już nie taki paździesz, i firmy też zaczynają stosować, więc zostałem na Debianie.

Ostatnio edytowany przez seler (2017-10-13 20:30:08)


a to feler westchnął seler

Offline

 

#17  2017-10-13 20:34:58

  seler - Użytkownik

seler
Użytkownik
Zarejestrowany: 2012-05-15

Re: Problem z dźwiękiem przez HDMI

ZFSonLinux z repo Debiana Stretch jest w wersji 0.6.9.5 i ono działa na kernelu max 4.10, także dla mnie ten kernel z aptosida linux-image-4.13.0-6.slh.1-aptosid-amd64 raczej odpada...


a to feler westchnął seler

Offline

 

#18  2017-10-13 21:52:31

  Jacekalex - Podobno człowiek...;)

Jacekalex
Podobno człowiek...;)
Skąd: /dev/random
Zarejestrowany: 2008-01-07

Re: Problem z dźwiękiem przez HDMI

W FAQ masz arta azhaga o kluczach gpg, rzuć okiem na niego.


W demokracji każdy naród ma taką władzę, na jaką zasługuje ;)
Si vis pacem  para bellum  ;)       |       Pozdrawiam :)

Offline

 

#19  2017-10-15 02:54:42

  wikingagressor - Użytkownik

wikingagressor
Użytkownik
Skąd: Józefów k.Błonia, mazowieck
Zarejestrowany: 2015-02-03

Re: Problem z dźwiękiem przez HDMI

seler napisał(-a):

Sprawdziłem twoje polecenia - końcówka powinna być chyba hw: 0,3 0,7 0,8, nie? Używając 1,[378] wyskakuje błąd.
I na 0,3 0,7 0,8 i na 1,3 1,7 1,8 - cisza.

Żadne moje próby po odinstalowaniu pulseaudio nie dały żadnego dźwięku przez HDMI.

Po zerknieciu na twoje dmseg wychodzi ze output karty przez HDMI masz na
hw:0, [14 15 16].
To raczej nie jest kwestia kernela tylko konfiguracji.


Peace, Love and Debian for the World!!!

Offline

 

#20  2017-10-15 21:59:08

  seler - Użytkownik

seler
Użytkownik
Zarejestrowany: 2012-05-15

Re: Problem z dźwiękiem przez HDMI

K.... mać!!
To chyba wina TV. Gdy przełączę TV na HDMI to dźwięk w telewizorze jest - po wciśnięciu na pilocie klawiszy np. podgłaszania/menu "pika". Natomiast po puszczeniu komendy

Kod:

speaker-test -c2 -l 1 -t sine -D hdmi:CARD=PCH,DEV=0

telewizor staje się niemy - nawet przestaje pikać w odpowiedzi na wciskanie klawiszy na pilocie! Jak przełączę na kablówkę, to dźwięk się pojawia, po czym gdy przełączę na hdmi, też dźwięk klawiszy pilota znowu działa. Do momentu kolejnego puszczenia speaker-test.

Telewizor to już nieco leciwy Samsung TV UE40ES6100 i najwyraźniej telewizorom z tej serii zdarza się mieć takie właśnie objawy. Ale dziwne, że odtwarzacz DVD, również podłączony przez HDMI nie daje takich problemów. Zamieniałem w telewizorze wtyki HDMI od tego kompa i DVD i nic nie pomogło, więc to raczej nie jest wina walniętego złącza HDMI na telewizorze.

W specyfikacji telewizora odnośnie HDMI jest:

HDMI IN
Dźwięk: Dwukanałowy liniowy PCM 32/44,1/48 kHz  16/20/24-bitowy

speaker-test odpalony komendą powyżej rusza z takimi parametrami:

Kod:

$ speaker-test -c2 -l 1 -t sine -D hdmi:CARD=PCH,DEV=0

speaker-test 1.1.3

Playback device is hdmi:CARD=PCH,DEV=0
Stream parameters are 48000Hz, S16_LE, 2 channels
Sine wave rate is 440,0000Hz
Rate set to 48000Hz (requested 48000Hz)  <==========
Buffer size range from 64 to 524288
Period size range from 32 to 262144
Using max buffer size 524288
Periods = 4
was set period_size = 131072
was set buffer_size = 524288
 0 - Front Left
 1 - Front Right
Time per period = 5,490944

... więc z bit rate 48kHz, niby obsługiwanym przez TV.
Próbowałem odpalać speaker-test z innym bit rate wziętym z tej dokumentacji powyżej, czyli komendami

Kod:

speaker-test --rate 44100 -c2 -l 1 -t sine -D hdmi:CARD=PCH,DEV=0
speaker-test --rate 32000 -c2 -l 1 -t sine -D hdmi:CARD=PCH,DEV=0

ale efekt jest dokładnie taki sam...

wikingagressor napisał(-a):

Po zerknieciu na twoje dmseg wychodzi ze output karty przez HDMI masz na
hw:0, [14 15 16].
To raczej nie jest kwestia kernela tylko konfiguracji.

Raczej nie, z 14,15 lub 16 efekt jest taki:

Kod:

$ speaker-test -c2 -l 1 -t sine -D hw:0,14

speaker-test 1.1.3

Playback device is hw:0,14
Stream parameters are 48000Hz, S16_LE, 2 channels
Sine wave rate is 440,0000Hz
Playback open error: -2,Nie ma takiego pliku ani katalogu

Co do kernela, to wgrałem z backportów wersję

Kod:

# uname -a
Linux server-j4205 4.12.0-0.bpo.2-amd64 #1 SMP Debian 4.12.13-1~bpo9+1 (2017-09-28) x86_64 GNU/Linux

ale nic to w tym przypadku nie zmieniło.


a to feler westchnął seler

Offline

 

#21  2017-10-29 18:44:57

  seler - Użytkownik

seler
Użytkownik
Zarejestrowany: 2012-05-15

Re: Problem z dźwiękiem przez HDMI

Obszedłem ten problem przez podpięcie dźwięku do telewizora analogowym kablem audio. TV na szczęście posiada gniazdo AUDIO IN, które działa we współpracy z HDMI.


a to feler westchnął seler

Offline

 

Stopka forum

Powered by PunBB
© Copyright 2002–2005 Rickard Andersson
To nie jest tylko forum, to nasza mała ojczyzna ;-)