Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!

Ogłoszenie

Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.

#1  2015-03-28 16:52:31

  reemeek - Użytkownik

reemeek
Użytkownik
Zarejestrowany: 2013-07-04

Tuner USB-DVBT pod debianem

Zakupiłem w Niemczech dokładnie taki tunerek http://www.terratec.net/details.php?artnr=145259#.VRbC6rUjzWU sprawdziłem w sklepie szybko przed zakupem kompatybilność z linux'em ze strony http://www.linuxtv.org/wiki/index.php/DVB-T_USB_Devices lukam, kukam i obczajam tunerek zaznaczony kolorem zielonym, więc do koszyka i do kasy :-) Jednak po podłączeniu do laptopa zonk.. vlc i kaffeine strzela foch'a.. luknąłem szczegółowo

Kod:

root@rmk-notebook:/home/rmk# lsusb 
Bus 004 Device 003: ID 5986:0295 Acer, Inc 
Bus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 004: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller
Bus 003 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 048d:9135 Integrated Technology Express, Inc. Zolid Mini DVB-T Stick
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

http://www.fotoszok.pl/upload/0649cbe3.jpg

Kod:

root@rmk-notebook:/home/rmk# uname -a
Linux rmk-notebook 3.16.0-4-686-pae #1 SMP Debian 3.16.7-ckt4-3 (2015-02-03) i686 GNU/Linux

Miałem jeszcze nadzieje ze z apt jeszcze ściągnę ale niestety

Kod:

root@rmk-notebook:/home/rmk# aptitude search linux-image
i A linux-image-3.12-1-686-pae                                 - Linux 3.12 for modern PCs                                            
i A linux-image-3.13-1-686-pae                                 - Linux 3.13 for modern PCs                                            
i A linux-image-3.14-1-686-pae                                 - Linux 3.14 for modern PCs                                            
p   linux-image-3.16.0-4-586                                   - Linux 3.16 for older PCs                                             
i A linux-image-3.16.0-4-686-pae                               - Linux 3.16 for modern PCs                                            
p   linux-image-3.16.0-4-686-pae-dbg                           - Debugging symbols for Linux 3.16.0-4-686-pae                         
p   linux-image-3.16.0-4-amd64                                 - Linux 3.16 for 64-bit PCs                                            
p   linux-image-486                                            - Jądro Linux do starszych komputerów (pakiet atrapa)                  
p   linux-image-586                                            - Jądro Linux do starszych komputerów (metapakiet)                     
i   linux-image-686-pae                                        - Jądro Linux do nowoczesnych pecetów (metapakiet)                     
p   linux-image-686-pae-dbg                                    - Debugging symbols for Linux 686-pae configuration (meta-package)     
p   linux-image-amd64                                          - Linux for 64-bit PCs (meta-package)

Jeżeli dobrze skojarzyłem wystarczy ,,tylko" (^_-) wkompilować nowszego kernela.. i tu już mi się robi słabo i proszę o pomoc :-)

Offline

 

#2  2015-03-28 17:26:21

  diabolic - Użytkownik

diabolic
Użytkownik
Skąd: okolice Leżajska
Zarejestrowany: 2007-10-08

Re: Tuner USB-DVBT pod debianem

Ale kernele masz przecież nowsze niż minimalny wymagany, i tutaj akurat nic nie trzeba robić. Sprawdź lepiej czy w katalogu

Kod:

/lib/firmware

masz odpowiedni plik firmwaru dla tej karty. Możesz zapodać jeszcze wynik dmesg, to wtedy będzie wiadomo, czy brakuje pliku firmware dla tej karty.


I am the one who chose my path

Offline

 

#3  2015-03-28 17:53:34

  reemeek - Użytkownik

reemeek
Użytkownik
Zarejestrowany: 2013-07-04

Re: Tuner USB-DVBT pod debianem

Kod:

dmesg

Kod:

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.16.0-4-686-pae (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt4-3 (2015-02-03)
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000baabefff] usable
[    0.000000] BIOS-e820: [mem 0x00000000baabf000-0x00000000baebefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000baebf000-0x00000000bafbefff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bafbf000-0x00000000baffefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bafff000-0x00000000baffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bb000000-0x00000000bf9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffb80000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013f5fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: LENOVO 20150/Product Name, BIOS 5ECN42WW(V4.01) 03/14/2013
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x13f600 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-E7FFF write-protect
[    0.000000]   E8000-EFFFF write-combining
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FC0000000 write-back
[    0.000000]   2 base 0BB000000 mask FFF000000 uncachable
[    0.000000]   3 base 0BC000000 mask FFC000000 uncachable
[    0.000000]   4 base 0FFC00000 mask FFFC00000 write-protect
[    0.000000]   5 base 100000000 mask FC0000000 write-back
[    0.000000]   6 base 13F600000 mask FFFE00000 uncachable
[    0.000000]   7 base 13F800000 mask FFF800000 uncachable
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [c00fe1b0]
[    0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[    0.000000] Base memory trampoline at [c0099000] 99000 size 16384
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x37200000-0x373fffff]
[    0.000000]  [mem 0x37200000-0x373fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x34000000-0x371fffff]
[    0.000000]  [mem 0x34000000-0x371fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x1fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x20200000-0x33ffffff]
[    0.000000]  [mem 0x20200000-0x33ffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x37400000-0x375fdfff]
[    0.000000]  [mem 0x37400000-0x375fdfff] page 4k
[    0.000000] BRK [0x01796000, 0x01796fff] PGTABLE
[    0.000000] BRK [0x01797000, 0x01798fff] PGTABLE
[    0.000000] BRK [0x01799000, 0x01799fff] PGTABLE
[    0.000000] BRK [0x0179a000, 0x0179afff] PGTABLE
[    0.000000] RAMDISK: [mem 0x35d98000-0x36ec3fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x000FE020 000024 (v02 LENOVO)
[    0.000000] ACPI: XSDT 0xBAFFE210 000094 (v01 LENOVO CB-01    00000001      01000013)
[    0.000000] ACPI: FACP 0xBAFFB000 0000F4 (v04 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: DSDT 0xBAFEE000 0099A4 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: FACS 0xBAFBB000 000040
[    0.000000] ACPI: UEFI 0xBAFFD000 000236 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: ASF! 0xBAFFC000 0000A5 (v32 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: HPET 0xBAFFA000 000038 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: APIC 0xBAFF9000 00008C (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: MCFG 0xBAFF8000 00003C (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SLIC 0xBAFED000 000176 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0xBAFEC000 0006FE (v01 LENOVO CB-01    00001000 ACPI 00040000)
[    0.000000] ACPI: BOOT 0xBAFEA000 000028 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: ASPT 0xBAFE5000 000034 (v07 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: FPDT 0xBAFE3000 000044 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0xBAFE2000 0008E4 (v01 LENOVO CB-01    00003000 ACPI 00040000)
[    0.000000] ACPI: SSDT 0xBAFE1000 000A92 (v01 LENOVO CB-01    00003000 ACPI 00040000)
[    0.000000] ACPI: SSDT 0xBAFDE000 002392 (v01 LENOVO CB-01    00001000 ACPI 00040000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 4224MB HIGHMEM available.
[    0.000000] 885MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 375fe000
[    0.000000]   low ram: 0 - 375fe000
[    0.000000] BRK [0x0179b000, 0x0179bfff] PGTABLE
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   Normal   [mem 0x01000000-0x375fdfff]
[    0.000000]   HighMem  [mem 0x375fe000-0x3f5fffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009cfff]
[    0.000000]   node   0: [mem 0x00100000-0x1fffffff]
[    0.000000]   node   0: [mem 0x20200000-0x40003fff]
[    0.000000]   node   0: [mem 0x40005000-0xbaabefff]
[    0.000000]   node   0: [mem 0xbafff000-0xbaffffff]
[    0.000000]   node   0: [mem 0x00000000-0x3f5fffff]
[    0.000000] On node 0 totalpages: 1023579
[    0.000000] free_area_init_node: node 0, pgdat c1656e40, node_mem_map f35a8020
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   Normal zone: 1740 pages used for memmap
[    0.000000]   Normal zone: 222206 pages, LIFO batch:31
[    0.000000]   HighMem zone: 8449 pages used for memmap
[    0.000000]   HighMem zone: 797377 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] Reserving Intel graphics stolen memory at 0xbba00000-0xbf9fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[    0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.000000] e820: [mem 0xbfa00000-0xefffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @f757b000 s35392 r0 d21952 u57344
[    0.000000] pcpu-alloc: s35392 r0 d21952 u57344 alloc=14*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1021807
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-686-pae root=UUID=f822b864-15f7-488d-9492-58041b3ee036 ro quiet
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] CPU0 microcode updated early to revision 0x1b, date = 2014-05-29
[    0.000000] Initializing CPU#0
[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] Initializing HighMem for node 0 (000375fe:0013f600)
[    0.000000] Initializing Movable for node 0 (00000000:00000000)
[    0.000000] Memory: 4026664K/4094316K available (4594K kernel code, 518K rwdata, 1448K rodata, 656K init, 460K bss, 67652K reserved, 3189508K highmem)
[    0.000000] virtual kernel memory layout:
    fixmap  : 0xffd36000 - 0xfffff000   (2852 kB)
    pkmap   : 0xff600000 - 0xff800000   (2048 kB)
    vmalloc : 0xf7dfe000 - 0xff5fe000   ( 120 MB)
    lowmem  : 0xc0000000 - 0xf75fe000   ( 885 MB)
      .init : 0xc166b000 - 0xc170f000   ( 656 kB)
      .data : 0xc147cdc0 - 0xc1669800   (1970 kB)
      .text : 0xc1000000 - 0xc147cdc0   (4595 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] Hierarchical RCU implementation.
[    0.000000]     RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000]     RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=8.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS:2304 nr_irqs:744 16
[    0.000000] CPU 0 irqstacks, hard=f7008000 soft=f700a000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2394.640 MHz processor
[    0.000034] Calibrating delay loop (skipped), value calculated using timer frequency.. 4789.28 BogoMIPS (lpj=9578560)
[    0.000036] pid_max: default: 32768 minimum: 301
[    0.000042] ACPI: Core revision 20140424
[    0.008287] ACPI: All ACPI Tables successfully acquired
[    0.020421] Security Framework initialized
[    0.020429] AppArmor: AppArmor disabled by boot time parameter
[    0.020430] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.020441] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.020443] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.020609] Initializing cgroup subsys memory
[    0.020613] Initializing cgroup subsys devices
[    0.020618] Initializing cgroup subsys freezer
[    0.020621] Initializing cgroup subsys net_cls
[    0.020625] Initializing cgroup subsys blkio
[    0.020628] Initializing cgroup subsys perf_event
[    0.020629] Initializing cgroup subsys net_prio
[    0.020651] CPU: Physical Processor ID: 0
[    0.020652] CPU: Processor Core ID: 0
[    0.020656] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.020659] mce: CPU supports 7 MCE banks
[    0.020670] CPU0: Thermal monitoring enabled (TM1)
[    0.020679] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
tlb_flushall_shift: 2
[    0.020845] Freeing SMP alternatives memory: 20K (c170f000 - c1714000)
[    0.021755] ftrace: allocating 20730 entries in 41 pages
[    0.030655] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.031083] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.070802] smpboot: CPU0: Intel(R) Core(TM) i3-3110M CPU @ 2.40GHz (fam: 06, model: 3a, stepping: 09)
[    0.070808] TSC deadline timer enabled
[    0.070831] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
[    0.070851] ... version:                3
[    0.070852] ... bit width:              48
[    0.070853] ... generic registers:      4
[    0.070854] ... value mask:             0000ffffffffffff
[    0.070855] ... max period:             0000ffffffffffff
[    0.070856] ... fixed-purpose events:   3
[    0.070857] ... event mask:             000000070000000f
[    0.072104] CPU 1 irqstacks, hard=f7174000 soft=f7176000
[    0.072105] x86: Booting SMP configuration:
[    0.072107] .... node  #0, CPUs:      #1
[    0.082312] Initializing CPU#1
[    0.085217] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.085306] CPU 2 irqstacks, hard=f7248000 soft=f724a000
[    0.085307]  #2
[    0.095569] Initializing CPU#2
[    0.098537] CPU 3 irqstacks, hard=f727c000 soft=f727e000
[    0.098540]  #3
[    0.108799] Initializing CPU#3
[    0.111700] x86: Booted up 1 node, 4 CPUs
[    0.111704] smpboot: Total of 4 processors activated (19157.12 BogoMIPS)
[    0.114890] devtmpfs: initialized
[    0.115083] PM: Registering ACPI NVS region [mem 0xbaebf000-0xbafbefff] (1048576 bytes)
[    0.115938] pinctrl core: initialized pinctrl subsystem
[    0.116007] NET: Registered protocol family 16
[    0.116102] cpuidle: using governor ladder
[    0.116104] cpuidle: using governor menu
[    0.116150] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.116151] ACPI: bus type PCI registered
[    0.116153] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.116235] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[    0.116237] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[    0.116238] PCI: Using MMCONFIG for extended config space
[    0.116239] PCI: Using configuration type 1 for base access
[    0.116350] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.116350] mtrr: probably your BIOS does not setup all CPUs.
[    0.116351] mtrr: corrected configuration.
[    0.128103] ACPI: Added _OSI(Module Device)
[    0.128106] ACPI: Added _OSI(Processor Device)
[    0.128107] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.128108] ACPI: Added _OSI(Processor Aggregator Device)
[    0.131115] ACPI: Executed 1 blocks of module-level executable AML code
[    0.142879] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.143710] ACPI: Dynamic OEM Table Load:
[    0.143718] ACPI: SSDT 0xF7281000 00083B (v01 PmRef  Cpu0Cst  00003001 INTL 20100121)
[    0.155985] ACPI: Dynamic OEM Table Load:
[    0.155992] ACPI: SSDT 0xF7315800 000303 (v01 PmRef  ApIst    00003000 INTL 20100121)
[    0.170905] ACPI: Dynamic OEM Table Load:
[    0.170911] ACPI: SSDT 0xF7269E00 000119 (v01 PmRef  ApCst    00003000 INTL 20100121)
[    0.180740] ACPI: Interpreter enabled
[    0.180749] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
[    0.180753] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[    0.180765] ACPI: (supports S0 S3 S4 S5)
[    0.180766] ACPI: Using IOAPIC for interrupt routing
[    0.180791] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.331108] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.331113] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.331222] \_SB_.PCI0:_OSC invalid UUID
[    0.331223] _OSC request data:1 1f 0 
[    0.331227] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.331840] PCI host bridge to bus 0000:00
[    0.331843] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.331845] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.331846] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.331848] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.331850] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xfeafffff]
[    0.331857] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[    0.331939] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
[    0.331972] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.332007] pci 0000:00:01.0: System wakeup disabled by ACPI
[    0.332043] pci 0000:00:01.1: [8086:0155] type 01 class 0x060400
[    0.332074] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
[    0.332104] pci 0000:00:01.1: System wakeup disabled by ACPI
[    0.332144] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[    0.332154] pci 0000:00:02.0: reg 0x10: [mem 0xd3000000-0xd33fffff 64bit]
[    0.332160] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.332165] pci 0000:00:02.0: reg 0x20: [io  0x4000-0x403f]
[    0.332260] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[    0.332283] pci 0000:00:14.0: reg 0x10: [mem 0xd3600000-0xd360ffff 64bit]
[    0.332355] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.332390] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.332431] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[    0.332455] pci 0000:00:16.0: reg 0x10: [mem 0xd3614000-0xd361400f 64bit]
[    0.332531] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.332612] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[    0.332863] pci 0000:00:1a.0: reg 0x10: [mem 0xd3619000-0xd36193ff]
[    1.632288] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    1.632346] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    1.632390] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[    1.632407] pci 0000:00:1b.0: reg 0x10: [mem 0xd3610000-0xd3613fff 64bit]
[    1.632482] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    1.632522] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    1.632562] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[    1.632644] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    1.632719] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[    1.632803] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    1.632887] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[    1.633131] pci 0000:00:1d.0: reg 0x10: [mem 0xd3618000-0xd36183ff]
[    1.634554] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    1.634609] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    1.634649] pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100
[    1.634820] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[    1.634840] pci 0000:00:1f.2: reg 0x10: [io  0x4088-0x408f]
[    1.634848] pci 0000:00:1f.2: reg 0x14: [io  0x4094-0x4097]
[    1.634856] pci 0000:00:1f.2: reg 0x18: [io  0x4080-0x4087]
[    1.634864] pci 0000:00:1f.2: reg 0x1c: [io  0x4090-0x4093]
[    1.634872] pci 0000:00:1f.2: reg 0x20: [io  0x4060-0x407f]
[    1.634880] pci 0000:00:1f.2: reg 0x24: [mem 0xd3617000-0xd36177ff]
[    1.634926] pci 0000:00:1f.2: PME# supported from D3hot
[    1.634995] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[    1.635011] pci 0000:00:1f.3: reg 0x10: [mem 0xd3615000-0xd36150ff 64bit]
[    1.635032] pci 0000:00:1f.3: reg 0x20: [io  0x4040-0x405f]
[    1.635164] pci 0000:01:00.0: [10de:1140] type 00 class 0x030200
[    1.635176] pci 0000:01:00.0: reg 0x10: [mem 0xd2000000-0xd2ffffff]
[    1.635187] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[    1.635198] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[    1.635205] pci 0000:01:00.0: reg 0x24: [io  0x3000-0x307f]
[    1.635213] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
[    1.635276] pci 0000:01:00.0: System wakeup disabled by ACPI
[    1.640278] pci 0000:00:01.0: PCI bridge to [bus 01]
[    1.640283] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    1.640288] pci 0000:00:01.0:   bridge window [mem 0xd2000000-0xd2ffffff]
[    1.640294] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[    1.640355] pci 0000:00:01.1: PCI bridge to [bus 02]
[    1.640494] pci 0000:03:00.0: [1969:1090] type 00 class 0x020000
[    1.640598] pci 0000:03:00.0: reg 0x10: [mem 0xd3500000-0xd353ffff 64bit]
[    1.640647] pci 0000:03:00.0: reg 0x18: [io  0x2000-0x207f]
[    1.641139] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    1.641264] pci 0000:03:00.0: System wakeup disabled by ACPI
[    1.648323] pci 0000:00:1c.0: PCI bridge to [bus 03]
[    1.648338] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    1.648342] pci 0000:00:1c.0:   bridge window [mem 0xd3500000-0xd35fffff]
[    1.648435] pci 0000:04:00.0: [168c:0032] type 00 class 0x028000
[    1.648467] pci 0000:04:00.0: reg 0x10: [mem 0xd3400000-0xd347ffff 64bit]
[    1.648531] pci 0000:04:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[    1.648617] pci 0000:04:00.0: supports D1 D2
[    1.648618] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    1.648650] pci 0000:04:00.0: System wakeup disabled by ACPI
[    1.656307] pci 0000:00:1c.1: PCI bridge to [bus 04]
[    1.656318] pci 0000:00:1c.1:   bridge window [mem 0xd3400000-0xd34fffff]
[    1.656370] pci_bus 0000:00: on NUMA node 0
[    1.732658] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    1.732706] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    1.732751] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    1.732796] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    1.732839] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    1.732884] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[    1.732928] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[    1.732972] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    1.733067] ACPI: Enabled 5 GPEs in block 00 to 3F
[    1.733099] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    1.733193] vgaarb: setting as boot device: PCI:0000:00:02.0
[    1.733195] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    1.733197] vgaarb: loaded
[    1.733198] vgaarb: bridge control possible 0000:00:02.0
[    1.733247] PCI: Using ACPI for IRQ routing
[    1.734770] PCI: pci_cache_line_size set to 64 bytes
[    1.734824] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[    1.734826] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[    1.734827] e820: reserve RAM buffer [mem 0xbaabf000-0xbbffffff]
[    1.734829] e820: reserve RAM buffer [mem 0xbb000000-0xbbffffff]
[    1.734830] e820: reserve RAM buffer [mem 0x13f600000-0x13fffffff]
[    1.734974] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    1.734979] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    1.737006] Switched to clocksource hpet
[    1.742255] pnp: PnP ACPI init
[    1.742270] ACPI: bus type PNP registered
[    1.742381] system 00:00: [io  0x0680-0x069f] has been reserved
[    1.742383] system 00:00: [io  0x1000-0x100f] has been reserved
[    1.742385] system 00:00: [io  0xffff] has been reserved
[    1.742387] system 00:00: [io  0xffff] has been reserved
[    1.742389] system 00:00: [io  0x0400-0x0453] could not be reserved
[    1.742391] system 00:00: [io  0x0458-0x047f] has been reserved
[    1.742392] system 00:00: [io  0x0500-0x057f] has been reserved
[    1.742394] system 00:00: [io  0x164e-0x164f] has been reserved
[    1.742396] system 00:00: [io  0xfd60-0xfd63] has been reserved
[    1.742399] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.742429] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.742475] system 00:02: [io  0x0454-0x0457] has been reserved
[    1.742477] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    1.742505] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[    1.742542] pnp 00:04: Plug and Play ACPI device, IDs SYN073b SYN0700 SYN0002 PNP0f13 (active)
[    1.813234] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    1.813237] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[    1.813238] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[    1.813240] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[    1.813242] system 00:05: [mem 0xf0000000-0xf3ffffff] has been reserved
[    1.813244] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[    1.813246] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
[    1.813248] system 00:05: [mem 0xff000000-0xff000fff] has been reserved
[    1.813250] system 00:05: [mem 0xff010000-0xffffffff] could not be reserved
[    1.813252] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[    1.813254] system 00:05: [mem 0xbfa00000-0xbfa00fff] has been reserved
[    1.813256] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.813550] system 00:06: [mem 0x20000000-0x201fffff] has been reserved
[    1.813552] system 00:06: [mem 0x40004000-0x40004fff] has been reserved
[    1.813554] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[    1.813569] pnp: PnP ACPI: found 7 devices
[    1.813570] ACPI: bus type PNP unregistered
[    1.813575] PnPBIOS: Disabled by ACPI PNP
[    1.850152] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
[    1.850155] pci 0000:04:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
[    1.850184] pci 0000:01:00.0: BAR 6: can't assign mem pref (size 0x80000)
[    1.850186] pci 0000:00:01.0: PCI bridge to [bus 01]
[    1.850188] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    1.850191] pci 0000:00:01.0:   bridge window [mem 0xd2000000-0xd2ffffff]
[    1.850193] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[    1.850197] pci 0000:00:01.1: PCI bridge to [bus 02]
[    1.850202] pci 0000:00:1c.0: PCI bridge to [bus 03]
[    1.850204] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    1.850210] pci 0000:00:1c.0:   bridge window [mem 0xd3500000-0xd35fffff]
[    1.850220] pci 0000:04:00.0: BAR 6: assigned [mem 0xd3480000-0xd348ffff pref]
[    1.850222] pci 0000:00:1c.1: PCI bridge to [bus 04]
[    1.850227] pci 0000:00:1c.1:   bridge window [mem 0xd3400000-0xd34fffff]
[    1.850236] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    1.850237] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    1.850239] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    1.850241] pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xfeafffff]
[    1.850242] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
[    1.850244] pci_bus 0000:01: resource 1 [mem 0xd2000000-0xd2ffffff]
[    1.850246] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[    1.850248] pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]
[    1.850249] pci_bus 0000:03: resource 1 [mem 0xd3500000-0xd35fffff]
[    1.850251] pci_bus 0000:04: resource 1 [mem 0xd3400000-0xd34fffff]
[    1.850308] NET: Registered protocol family 2
[    1.850505] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    1.850516] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    1.850529] TCP: Hash tables configured (established 8192 bind 8192)
[    1.850540] TCP: reno registered
[    1.850542] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    1.850546] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    1.850602] NET: Registered protocol family 1
[    1.850617] pci 0000:00:02.0: Video device with shadowed ROM
[    1.881257] pci 0000:03:00.0: set MSI_INTX_DISABLE_BUG flag
[    1.881273] PCI: CLS 64 bytes, default 64
[    1.881312] Unpacking initramfs...
[    2.182885] Freeing initrd memory: 17584K (f5d98000 - f6ec4000)
[    2.182953] Simple Boot Flag at 0x44 set to 0x1
[    2.183168] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[    2.183211] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x1b
[    2.183218] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x1b
[    2.183222] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x15
[    2.183229] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x15
[    2.183294] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    2.183581] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    2.183629] audit: initializing netlink subsys (disabled)
[    2.183642] audit: type=2000 audit(1427563773.880:1): initialized
[    2.183972] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    2.183984] zbud: loaded
[    2.184094] VFS: Disk quotas dquot_6.5.2
[    2.184111] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    2.184162] msgmni has been set to 1669
[    2.184502] alg: No test for stdrng (krng)
[    2.184529] bounce: pool size: 64 pages
[    2.184543] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    2.184592] io scheduler noop registered
[    2.184596] io scheduler deadline registered
[    2.184629] io scheduler cfq registered (default)
[    2.184789] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    2.184897] pcieport 0000:00:01.1: irq 41 for MSI/MSI-X
[    2.185160] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    2.185175] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    2.185214] intel_idle: MWAIT substates: 0x21120
[    2.185215] intel_idle: v0.4 model 0x3A
[    2.185216] intel_idle: lapic_timer_reliable_states 0xffffffff
[    2.185413] GHES: HEST is not enabled!
[    2.185429] isapnp: Scanning for PnP cards...
[    2.539796] isapnp: No Plug & Play device found
[    2.539873] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    2.540296] Linux agpgart interface v0.103
[    2.540457] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS0] at 0x60,0x64 irq 1,12
[    2.559180] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.559184] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.559296] mousedev: PS/2 mouse device common for all mice
[    2.559341] rtc_cmos 00:01: RTC can wake from S4
[    2.559603] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    2.559632] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[    2.559644] Intel P-state driver initializing.
[    2.559662] Intel pstate controlling: cpu 0
[    2.559679] Intel pstate controlling: cpu 1
[    2.559696] Intel pstate controlling: cpu 2
[    2.559714] Intel pstate controlling: cpu 3
[    2.559766] ledtrig-cpu: registered to indicate activity on CPUs
[    2.560470] TCP: cubic registered
[    2.560581] NET: Registered protocol family 10
[    2.560947] mip6: Mobile IPv6
[    2.560954] NET: Registered protocol family 17
[    2.560963] mpls_gso: MPLS GSO support
[    2.561282] Using IPI No-Shortcut mode
[    2.561616] registered taskstats version 1
[    2.562471] rtc_cmos 00:01: setting system clock to 2015-03-28 17:29:36 UTC (1427563776)
[    2.562612] PM: Hibernation image not present or could not be loaded.
[    2.562897] Freeing unused kernel memory: 656K (c166b000 - c170f000)
[    2.562985] Write protecting the kernel text: 4596k
[    2.563069] Write protecting the kernel read-only data: 1452k
[    2.563070] NX-protecting the kernel data: 3596k
[    2.573427] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    2.576630] systemd-udevd[70]: starting version 215
[    2.577204] random: systemd-udevd urandom read with 0 bits of entropy available
[    2.592506] ACPI: bus type USB registered
[    2.592541] usbcore: registered new interface driver usbfs
[    2.592558] usbcore: registered new interface driver hub
[    2.592773] usbcore: registered new device driver usb
[    2.593402] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.593708] ehci-pci: EHCI PCI platform driver
[    2.594090] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    2.594121] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    2.594159] ehci-pci 0000:00:1a.0: debug port 2
[    2.598158] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    2.598198] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd3619000
[    2.600243] SCSI subsystem initialized
[    2.600585] thermal LNXTHERM:00: registered as thermal_zone0
[    2.600587] ACPI: Thermal Zone [TZ00] (60 C)
[    2.603295] libata version 3.00 loaded.
[    2.605023] alx 0000:03:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [20:89:84:dd:f6:b7]
[    2.609892] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    2.609947] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.609950] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.609953] usb usb1: Product: EHCI Host Controller
[    2.609955] usb usb1: Manufacturer: Linux 3.16.0-4-686-pae ehci_hcd
[    2.609957] usb usb1: SerialNumber: 0000:00:1a.0
[    2.610245] hub 1-0:1.0: USB hub found
[    2.610255] hub 1-0:1.0: 2 ports detected
[    2.610609] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    2.610617] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    2.610632] ehci-pci 0000:00:1d.0: debug port 2
[    2.614529] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    2.614596] ehci-pci 0000:00:1d.0: irq 23, io mem 0xd3618000
[    2.625793] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    2.625837] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    2.625839] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.625841] usb usb2: Product: EHCI Host Controller
[    2.625843] usb usb2: Manufacturer: Linux 3.16.0-4-686-pae ehci_hcd
[    2.625844] usb usb2: SerialNumber: 0000:00:1d.0
[    2.625978] hub 2-0:1.0: USB hub found
[    2.625986] hub 2-0:1.0: 2 ports detected
[    2.626230] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    2.626238] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    2.626339] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    2.626360] xhci_hcd 0000:00:14.0: irq 42 for MSI/MSI-X
[    2.626417] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    2.626419] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.626420] usb usb3: Product: xHCI Host Controller
[    2.626422] usb usb3: Manufacturer: Linux 3.16.0-4-686-pae xhci_hcd
[    2.626423] usb usb3: SerialNumber: 0000:00:14.0
[    2.626560] hub 3-0:1.0: USB hub found
[    2.626569] hub 3-0:1.0: 4 ports detected
[    2.626894] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    2.626897] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    2.626928] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    2.626930] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.626931] usb usb4: Product: xHCI Host Controller
[    2.626933] usb usb4: Manufacturer: Linux 3.16.0-4-686-pae xhci_hcd
[    2.626934] usb usb4: SerialNumber: 0000:00:14.0
[    2.627042] hub 4-0:1.0: USB hub found
[    2.627051] hub 4-0:1.0: 4 ports detected
[    2.627353] ahci 0000:00:1f.2: version 3.0
[    2.627500] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[    2.627524] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    2.641812] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
[    2.641816] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems apst 
[    2.650388] scsi0 : ahci
[    2.650524] scsi1 : ahci
[    2.650630] scsi2 : ahci
[    2.650727] scsi3 : ahci
[    2.650829] scsi4 : ahci
[    2.650925] scsi5 : ahci
[    2.650970] ata1: SATA max UDMA/133 abar m2048@0xd3617000 port 0xd3617100 irq 43
[    2.650971] ata2: DUMMY
[    2.650974] ata3: SATA max UDMA/133 abar m2048@0xd3617000 port 0xd3617200 irq 43
[    2.650975] ata4: DUMMY
[    2.650976] ata5: DUMMY
[    2.650977] ata6: DUMMY
[    2.922154] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    2.970161] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.978450] ata1.00: ATA-8: ST1000LM024 HN-M101MBB, 2AR10001, max UDMA/100
[    2.978461] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    2.985100] ata1.00: configured for UDMA/100
[    2.985414] scsi 0:0:0:0: Direct-Access     ATA      ST1000LM024 HN-M 0001 PQ: 0 ANSI: 5
[    3.054572] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    3.054578] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.055036] hub 1-1:1.0: USB hub found
[    3.055186] hub 1-1:1.0: 6 ports detected
[    3.166419] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    3.182341] tsc: Refined TSC clocksource calibration: 2394.560 MHz
[    3.298787] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    3.298794] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.299253] hub 2-1:1.0: USB hub found
[    3.299390] hub 2-1:1.0: 6 ports detected
[    3.306417] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    3.310928] ata3.00: ATAPI: PLDS DVD-RW DS8A9SH, EL3A, max UDMA/100
[    3.311922] ata3.00: configured for UDMA/100
[    3.324947] scsi 2:0:0:0: CD-ROM            PLDS     DVD-RW DS8A9SH   EL3A PQ: 0 ANSI: 5
[    3.347324] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    3.347329] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    3.347388] sd 0:0:0:0: [sda] Write Protect is off
[    3.347392] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.347411] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.363894] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    3.363902] cdrom: Uniform CD-ROM driver Revision: 3.20
[    3.364250] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    3.365305] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    3.365453] sr 2:0:0:0: Attached scsi generic sg1 type 5
[    3.440861]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[    3.442067] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.466583] usb 3-4: new high-speed USB device number 2 using xhci_hcd
[    3.596841] usb 3-4: New USB device found, idVendor=048d, idProduct=9135
[    3.596848] usb 3-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.667047] usb 2-1.6: new high-speed USB device number 3 using ehci-pci
[    3.768347] usb 2-1.6: New USB device found, idVendor=5986, idProduct=0295
[    3.768354] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.768358] usb 2-1.6: Product: Lenovo EasyCamera
[    3.768361] usb 2-1.6: Manufacturer: Vimicro corp.
[    4.062293] PM: Starting manual resume from disk
[    4.062301] PM: Hibernation image partition 8:6 present
[    4.062303] PM: Looking for hibernation image.
[    4.083899] PM: Image not found (code -22)
[    4.083904] PM: Hibernation image not present or could not be loaded.
[    4.122002] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[    4.183232] Switched to clocksource tsc
[    4.856420] random: nonblocking pool is initialized
[    5.992214] systemd-udevd[326]: starting version 215
[    7.608900] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input2
[    7.608909] ACPI: Power Button [PWRB]
[    7.608998] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0E:00/input/input3
[    7.609002] ACPI: Sleep Button [SLPB]
[    7.609100] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input4
[    7.609144] ACPI: Lid Switch [LID0]
[    7.609223] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[    7.609227] ACPI: Power Button [PWRF]
[    7.615590] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    7.631043] ACPI Warning: SystemIO range 0x00000428-0x0000042f conflicts with OpRegion 0x00000400-0x0000047f (\PMIO) (20140424/utaddress-258)
[    7.631055] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.631062] ACPI Warning: SystemIO range 0x00000540-0x0000054f conflicts with OpRegion 0x00000500-0x00000563 (\GPIO) (20140424/utaddress-258)
[    7.631070] ACPI Warning: SystemIO range 0x00000540-0x0000054f conflicts with OpRegion 0x00000500-0x0000055f (\_SB_.PCI0.PEG0.PEGP.GPIO) (20140424/utaddress-258)
[    7.631077] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.631080] ACPI Warning: SystemIO range 0x00000530-0x0000053f conflicts with OpRegion 0x00000500-0x00000563 (\GPIO) (20140424/utaddress-258)
[    7.631087] ACPI Warning: SystemIO range 0x00000530-0x0000053f conflicts with OpRegion 0x00000500-0x0000055f (\_SB_.PCI0.PEG0.PEGP.GPIO) (20140424/utaddress-258)
[    7.631094] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.631097] ACPI Warning: SystemIO range 0x00000500-0x0000052f conflicts with OpRegion 0x00000500-0x00000563 (\GPIO) (20140424/utaddress-258)
[    7.631103] ACPI Warning: SystemIO range 0x00000500-0x0000052f conflicts with OpRegion 0x00000500-0x0000055f (\_SB_.PCI0.PEG0.PEGP.GPIO) (20140424/utaddress-258)
[    7.631110] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.631113] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    7.646931] mei_me 0000:00:16.0: irq 44 for MSI/MSI-X
[    7.804428] ACPI Warning: SystemIO range 0x00004040-0x0000405f conflicts with OpRegion 0x00004040-0x0000404f (\_SB_.PCI0.SBUS.SMBI) (20140424/utaddress-258)
[    7.804437] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.827109] [drm] Initialized drm 1.1.0 20060810
[    7.914384] ACPI: Battery Slot [BAT1] (battery present)
[    7.914547] ACPI: AC Adapter [ACAD] (on-line)
[    8.172516] input: PC Speaker as /devices/platform/pcspkr/input/input6
[    8.189518] [drm] Memory usable by graphics device = 2048M
[    8.189523] [drm] Replacing VGA console driver
[    8.189988] Console: switching to colour dummy device 80x25
[    8.250639] i915 0000:00:02.0: irq 45 for MSI/MSI-X
[    8.250656] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    8.250658] [drm] Driver supports precise vblank timestamp query.
[    8.250792] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    8.292274] fbcon: inteldrmfb (fb0) is primary device
[    8.337252] cfg80211: Calling CRDA to update world regulatory domain
[    8.494693] input: Ideapad extra buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input8
[    8.591093] iTCO_vendor_support: vendor-support=0
[    8.613515] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    8.613546] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[    8.613655] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    8.651917] ath: phy0: Set BT/WLAN RX diversity capability
[    8.658158] [drm:cpt_set_fifo_underrun_reporting] *ERROR* uncleared pch fifo underrun on pch transcoder A
[    8.658159] [drm:cpt_serr_int_handler] *ERROR* PCH transcoder A FIFO underrun
[    8.660106] ath: phy0: ASPM enabled: 0x42
[    8.660108] ath: EEPROM regdomain: 0x65
[    8.660109] ath: EEPROM indicates we should expect a direct regpair map
[    8.660111] ath: Country alpha2 being used: 00
[    8.660111] ath: Regpair used: 0x65
[    8.663253] alg: No test for crc32 (crc32-pclmul)
[    8.902013] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    8.902361] ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xf8e00000, irq=17
[    9.039797] Console: switching to colour frame buffer device 170x48
[    9.045050] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    9.045053] i915 0000:00:02.0: registered panic notifier
[    9.075542] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[    9.075787] ACPI: Video Device [PEGP] (multi-head: yes  rom: yes  post: no)
[    9.075908] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:35/LNXVIDEO:00/input/input9
[    9.076847] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    9.076979] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:03/input/input10
[    9.077085] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    9.081361] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[    9.175480] sound hdaudioC0D0: CX20590: BIOS auto-probing.
[    9.175931] sound hdaudioC0D0: autoconfig: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker
[    9.175935] sound hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    9.175938] sound hdaudioC0D0:    hp_outs=1 (0x19/0x0/0x0/0x0/0x0)
[    9.175940] sound hdaudioC0D0:    mono: mono_out=0x0
[    9.175942] sound hdaudioC0D0:    inputs:
[    9.175945] sound hdaudioC0D0:      Internal Mic=0x1b
[    9.175948] sound hdaudioC0D0:      Mic=0x1a
[    9.176808] sound hdaudioC0D0: Enable sync_write for stable communication
[    9.236259] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input11
[    9.237166] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[    9.237287] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[    9.237423] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[    9.348741] intel_rapl: RAPL domain dram detection failed
[    9.422429] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400, board id: 1695, fw id: 739436
[    9.485866] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[   10.116615] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[   10.664745] cfg80211: World regulatory domain updated:
[   10.664752] cfg80211:  DFS Master region: unset
[   10.664755] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   10.664760] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   10.664764] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   10.664766] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[   10.664770] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   10.664773] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[   10.664776] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[   10.664779] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   10.664782] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[   11.708935] media: Linux media interface: v0.10
[   11.722053] Linux video capture interface: v2.00
[   12.988868] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (5986:0295)
[   12.990492] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/input/input15
[   12.990648] usbcore: registered new interface driver uvcvideo
[   12.990651] USB Video Class driver (1.1.1)
[   14.345897] usb 3-4: dvb_usb_af9035: prechip_version=83 chip_version=01 chip_type=9135
[   14.346277] usb 3-4: dvb_usb_v2: found a 'ITE 9135 Generic' in warm state
[   14.347193] usb 3-4: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[   14.347231] DVB: registering new adapter (ITE 9135 Generic)
[   14.390939] i2c i2c-7: af9033: firmware version: LINK=255.255.255.255 OFDM=2.47.14.0
[   14.390956] usb 3-4: DVB: registering adapter 0 frontend 0 (Afatech AF9033 (DVB-T))...
[   14.418022] i2c i2c-7: tuner_it913x: ITE Tech IT913X successfully attached
[   14.455840] Registered IR keymap rc-it913x-v1
[   14.456052] input: ITE 9135 Generic as /devices/pci0000:00/0000:00:14.0/usb3/3-4/rc/rc0/input16
[   14.456178] rc0: ITE 9135 Generic as /devices/pci0000:00/0000:00:14.0/usb3/3-4/rc/rc0
[   14.456187] usb 3-4: dvb_usb_v2: schedule remote query interval to 500 msecs
[   14.456194] usb 3-4: dvb_usb_v2: 'ITE 9135 Generic' successfully initialized and connected
[   14.456247] usbcore: registered new interface driver dvb_usb_af9035
[   15.333658] Adding 3934204k swap on /dev/sda6.  Priority:-1 extents:1 across:3934204k FS
[   15.385570] EXT4-fs (sda5): re-mounted. Opts: (null)
[   15.544956] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[   16.197445] lp: driver loaded but no devices found
[   16.207230] ppdev: user-space parallel port driver
[   16.252605] fuse init (API version 7.23)
[   18.382794] RPC: Registered named UNIX socket transport module.
[   18.382799] RPC: Registered udp transport module.
[   18.382800] RPC: Registered tcp transport module.
[   18.382802] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   18.418854] FS-Cache: Loaded
[   18.449018] FS-Cache: Netfs 'nfs' registered for caching
[   18.515575] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   19.937696] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input17
[   20.729456] vboxdrv: Found 4 processor cores.
[   20.729996] vboxdrv: fAsync=0 offMin=0x210 offMax=0x21cc
[   20.730126] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[   20.730130] vboxdrv: Successfully loaded version 4.3.18_Debian (interface 0x001a0008).
[   20.849406] vboxpci: IOMMU not found (not compiled)
[   29.471233] Bluetooth: Core ver 2.19
[   29.471255] NET: Registered protocol family 31
[   29.471258] Bluetooth: HCI device and connection manager initialized
[   29.471265] Bluetooth: HCI socket layer initialized
[   29.471268] Bluetooth: L2CAP socket layer initialized
[   29.471279] Bluetooth: SCO socket layer initialized
[   29.900136] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   29.900144] Bluetooth: BNEP filters: protocol multicast
[   29.900156] Bluetooth: BNEP socket layer initialized
[   33.979056] alx 0000:03:00.0: irq 47 for MSI/MSI-X
[   33.981014] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   34.000667] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   35.889828] wlan0: authenticate with dc:ce:bc:98:7a:f2
[   35.897334] wlan0: send auth to dc:ce:bc:98:7a:f2 (try 1/3)
[   35.900684] wlan0: authenticated
[   35.902046] wlan0: associate with dc:ce:bc:98:7a:f2 (try 1/3)
[   35.915414] wlan0: RX AssocResp from dc:ce:bc:98:7a:f2 (capab=0x8431 status=0 aid=3)
[   35.915486] wlan0: associated
[   35.915520] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   38.406313] systemd-logind[2932]: New seat seat0.
[   38.418398] bbswitch: version 0.8
[   38.418410] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
[   38.418420] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEG0.PEGP
[   38.418449] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[   38.418581] bbswitch: detected an Optimus _DSM function
[   38.418705] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on
[   38.421827] bbswitch: disabling discrete graphics
[   38.421841] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[   38.437999] systemd-logind[2932]: Watching system buttons on /dev/input/event4 (Power Button)
[   38.438236] systemd-logind[2932]: Watching system buttons on /dev/input/event8 (Video Bus)
[   38.438374] systemd-logind[2932]: Watching system buttons on /dev/input/event1 (Power Button)
[   38.438509] systemd-logind[2932]: Watching system buttons on /dev/input/event2 (Sleep Button)
[   38.438613] systemd-logind[2932]: Watching system buttons on /dev/input/event7 (Video Bus)
[   38.438800] systemd-logind[2932]: Watching system buttons on /dev/input/event3 (Lid Switch)
[   47.347385] systemd-logind[2932]: Failed to start user service: Unknown unit: user@1000.service
[   47.350892] systemd-logind[2932]: New session 1 of user rmk.
[   92.141777] Bluetooth: RFCOMM TTY layer initialized
[   92.141787] Bluetooth: RFCOMM socket layer initialized
[   92.141794] Bluetooth: RFCOMM ver 1.11
[ 1059.267964] usb 3-4: USB disconnect, device number 2
[ 1059.314900] usb 3-4: dvb_usb_v2: 'ITE 9135 Generic' successfully deinitialized and disconnected
[ 1071.774982] usb 3-4: new high-speed USB device number 3 using xhci_hcd
[ 1071.905180] usb 3-4: New USB device found, idVendor=048d, idProduct=9135
[ 1071.905188] usb 3-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1071.906771] usb 3-4: dvb_usb_af9035: prechip_version=83 chip_version=01 chip_type=9135
[ 1071.907150] usb 3-4: dvb_usb_v2: found a 'ITE 9135 Generic' in cold state
[ 1071.907236] usb 3-4: firmware: failed to load dvb-usb-it9135-01.fw (-2)
[ 1071.907242] usb 3-4: Direct firmware load failed with error -2
[ 1071.907245] usb 3-4: Falling back to user helper
[ 1071.908759] usb 3-4: dvb_usb_v2: Did not find the firmware file 'dvb-usb-it9135-01.fw'. Please see linux/Documentation/dvb/ for more details on firmware-problems. Status -12
[ 1071.908777] dvb_usb_af9035: probe of 3-4:1.0 failed with error -12

Kod:

ls /lib/firmware/

Kod:

3com
advansys
agere_ap_fw.bin
agere_sta_fw.bin
amd-ucode
ar3k
ar5523.bin
ar7010_1_1.fw
ar7010.fw
ar9170.fw
ar9271.fw
ath3k-1.fw
ath6k
atmel_at76c502_3com.bin
atmel_at76c502_3com-wpa.bin
atmel_at76c502.bin
atmel_at76c502d.bin
atmel_at76c502d-wpa.bin
atmel_at76c502e.bin
atmel_at76c502e-wpa.bin
atmel_at76c502-wpa.bin
atmel_at76c503-i3861.bin
atmel_at76c503-i3863.bin
atmel_at76c503-rfmd-0.90.2-140.bin
atmel_at76c503-rfmd-acc.bin
atmel_at76c503-rfmd.bin
atmel_at76c504_2958-wpa.bin
atmel_at76c504a_2958-wpa.bin
atmel_at76c504.bin
atmel_at76c504c-wpa.bin
atmel_at76c505a-rfmd2958.bin
atmel_at76c505-rfmd2958.bin
atmel_at76c505-rfmd.bin
atmel_at76c506.bin
atmel_at76c506-wpa.bin
av7110
b43
b43legacy
BCM2033-FW.bin
BCM2033-MD.hex
bcm70012fw.bin
bcm70015fw.bin
bcmFilePlayFw.bin
bnx2
bnx2x
bnx2x-e1-5.0.21.0.fw
bnx2x-e1h-5.0.21.0.fw
brcm
carl9170-1.fw
cis
cxgb3
cxgb4
dabusb
dsp56k
dvb-fe-xc5000-1.6.114.fw
dvb-usb-dib0700-1.20.fw
e100
ene-ub6250
hp
htc_7010.fw
htc_9271.fw
i2400m-fw-usb-1.4.sbcf
i2400m-fw-usb-1.5.sbcf
i6050-fw-usb-1.5.sbcf
intel
intel-ucode
ipw2100-1.3.fw
ipw2100-1.3-i.fw
ipw2100-1.3-p.fw
ipw2200-bss.fw
ipw2200-ibss.fw
ipw2200-sniffer.fw
ipw2x00.LICENSE
isci
iwlwifi-1000-5.ucode
iwlwifi-100-5.ucode
iwlwifi-105-6.ucode
iwlwifi-135-6.ucode
iwlwifi-2000-6.ucode
iwlwifi-2030-6.ucode
iwlwifi-3160-7.ucode
iwlwifi-3160-8.ucode
iwlwifi-3160-9.ucode
iwlwifi-3945-2.ucode
iwlwifi-4965-2.ucode
iwlwifi-5000-2.ucode
iwlwifi-5000-5.ucode
iwlwifi-5150-2.ucode
iwlwifi-6000-4.ucode
iwlwifi-6000g2a-5.ucode
iwlwifi-6000g2a-6.ucode
iwlwifi-6000g2b-6.ucode
iwlwifi-6050-4.ucode
iwlwifi-6050-5.ucode
iwlwifi-7260-7.ucode
iwlwifi-7260-8.ucode
iwlwifi-7260-9.ucode
iwlwifi-7265-8.ucode
iwlwifi-7265-9.ucode
kaweth
keyspan_pda
lbtf_usb.bin
libertas
libertas_cs.fw
libertas_cs_helper.fw
matrox
mrvl
mts_cdma.fw
mts_edge.fw
mts_gsm.fw
mwl8k
myri10ge_ethp_z8e.dat
myri10ge_eth_z8e.dat
myri10ge_rss_ethp_z8e.dat
myri10ge_rss_eth_z8e.dat
phanfw.bin
prism2_ru.fw
prism2_ru.hex
ql2100_fw.bin
ql2200_fw.bin
ql2300_fw.bin
ql2322_fw.bin
ql2400_fw.bin
ql2500_fw.bin
qlogic
r128
radeon
rt2561.bin
rt2561s.bin
rt2661.bin
rt2860.bin
rt2870.bin
rt3070.bin
rt3071.bin
rt3090.bin
rt3290.bin
rt73.bin
RTL8192E
RTL8192SU
rtl_nic
rtlwifi
ru010803.fw
ru010803.hex
s5p-mfc.fw
s5p-mfc-v6.fw
s5p-mfc-v6-v2.fw
s5p-mfc-v7.fw
s5p-mfc-v8.fw
sd8385.bin
sd8385_helper.bin
sd8686.bin
sd8686_helper.bin
sd8688.bin
sd8688_helper.bin
STLC2500_R4_00_03.ptc
STLC2500_R4_00_06.ssf
STLC2500_R4_02_02_WLAN.ssf
STLC2500_R4_02_04.ptc
tehuti
ti-connectivity
tigon
ueagle-atm
usb8388.bin
usbduxfast_firmware.bin
usbdux_firmware.bin
usbduxsigma_firmware.bin
v4l-cx231xx-avcore-01.fw
v4l-cx23418-apu.fw
v4l-cx23418-cpu.fw
v4l-cx23418-dig.fw
v4l-cx2341x-dec.fw
v4l-cx2341x-enc.fw
v4l-cx2341x-init.mpg
v4l-cx23885-avcore-01.fw
v4l-cx25840.fw
v4l-pvrusb2-24xxx-01.fw
v4l-pvrusb2-29xxx-01.fw
vntwusb.fw
zd1211

zasugerować się tym? http://www.debian.pl/entries/264-Instalacja-tunera- … TV-DVB-T-QUBE

Ostatnio edytowany przez reemeek (2015-03-28 18:04:19)

Offline

 

#4  2015-03-28 18:05:19

  yossarian - Szczawiożerca

yossarian
Szczawiożerca
Skąd: Shangri-La
Zarejestrowany: 2011-04-25

Offline

 

#5  2015-03-28 19:09:56

  reemeek - Użytkownik

reemeek
Użytkownik
Zarejestrowany: 2013-07-04

Re: Tuner USB-DVBT pod debianem

Rozwiązany :)
Wystarczyło:
1. Pobrać plik i rozpakować po czy zostaje jeden plik o nazwie

dvb-usb-it9135.fw

http://www.ite.com.tw/uploads/firmware/v3.6.0.0/dvb-usb-it9135.zip
2. W miejscu gdzie zostały rozpakowany plik wyciąć 2 fragmenty z pliku poleceniem dd

Kod:

dd if=dvb-usb-it9135.fw ibs=1 skip=64 count=8128 of=dvb-usb-it9135-01.fw
dd if=dvb-usb-it9135.fw ibs=1 skip=12866 count=5817 of=dvb-usb-it9135-02.fw

3. Przenieść te 3 pliki do

Kod:

/lib/firmware

4. W brzydki windows'owski sposób zrebootować system :-)

dla ceniących sobie vlc warto doinstalować w-scan do znalezienia programów i zapisać je do pliku poleceniem

Kod:

w_scan -ft -c PL -X >> channels.conf

następnie wczytać przez vlc
polecam do tego apke vlcremote na smartfona
Thx za wskazówki :)

Mam jeszcze dwa pytanka. Jest możliwość odbierania radia fm za pomocą tego tunera? i czy powstała wtyczka do obsługi pilota pod owy tuner?

Ostatnio edytowany przez reemeek (2015-03-28 19:52:47)

Offline

 

#6  2015-03-28 23:17:06

  yossarian - Szczawiożerca

yossarian
Szczawiożerca
Skąd: Shangri-La
Zarejestrowany: 2011-04-25

Re: Tuner USB-DVBT pod debianem

reemeek napisał(-a):

Mam jeszcze dwa pytanka. Jest możliwość odbierania radia fm za pomocą tego tunera?

Może jeszcze ma zaparzać kawę?
Co ma wspólnego tuner DVB-T z radiem FM?

Offline

 

#7  2015-03-29 00:18:29

  Huk - Smoleńsk BULWA!

Huk
Smoleńsk BULWA!
Zarejestrowany: 2006-11-08

Re: Tuner USB-DVBT pod debianem

@reemeek:

Radio można odbierać tylko jeżeli posiadasz tuner hybrydowy (czyli DVB-T + zwykły, analogowy) do tego on sam w sobie musi mieć obsługę radia co nie jest w cale takie pewne, na samym DVB-T nie ma szans niestety.

Offline

 

#8  2015-03-29 00:30:42

  reemeek - Użytkownik

reemeek
Użytkownik
Zarejestrowany: 2013-07-04

Re: Tuner USB-DVBT pod debianem

Dzieki za wyjaśnienie oszczedziles mi czas ☺ a kawy nie pije wiec nie trzeba 😉

Offline

 

#9  2015-03-29 09:48:38

  ilin - Palacz

ilin
Palacz
Skąd: PRLu
Zarejestrowany: 2006-05-03

Re: Tuner USB-DVBT pod debianem

reemeek napisał(-a):

dla ceniących sobie vlc warto doinstalować w-scan do znalezienia programów

Polecam tvheadend jako server oblsługi tunera.

Jako klienta można używać vlc, mpv, kodi.

Osobiście używam mpv bo jest najszybszy.

tvheadend jest szczególnie pomocny przy nagrywaniu na czas.


Problemy rozwiązujemy na forum nie na PW -> Niech inni na tym skorzystają.
Polski portal Debiana

Offline

 

#10  2015-03-29 11:11:59

  reemeek - Użytkownik

reemeek
Użytkownik
Zarejestrowany: 2013-07-04

Re: Tuner USB-DVBT pod debianem

Zaraz przetestuje 😎 thx

Offline

 

Stopka forum

Powered by PunBB
© Copyright 2002–2005 Rickard Andersson
Możesz wyłączyć AdBlock — tu nie ma reklam ;-)