Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!

Ogłoszenie

Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.

Strony: 1

 

#1  2014-01-25 12:55:44

  uasic - Użytkownik

uasic
Użytkownik
Zarejestrowany: 2014-01-25

Tryb graficzny działa tylko dla root'a

Zainstalowałam Debiana Jessie na czysto, po formacie. Na początku chodziło, a potem sytuacja zrobiła się jak w temacie.

Podejrzewałam, że nie chce się zalogować z powodu zajętej partycji z /home (100%), ale zwolniłam do 85% i dalej bez zmian. Co zrobić z tym fantem?

Error jest tu:

Kod:

(EE) Screen 1 deleted because of no matching config section.

ale nic co pomogło innym internautom nie pomaga mi:(


Kod:

root@debian:~# lspci | grep -i vga
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)

Xorg.conf:

Kod:

Section "ServerLayout"
    Identifier     "X.org Configured"
    Screen      0  "Screen0" 0 0
    Screen      1  "Screen1" RightOf "Screen0"
    Screen      2  "Screen2" RightOf "Screen1"
    Screen      3  "Screen3" RightOf "Screen2"
    Screen      4  "Screen4" RightOf "Screen3"
    Screen      5  "Screen5" RightOf "Screen4"
    InputDevice    "Mouse0" "CorePointer"
    InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
    ModulePath   "/usr/lib/xorg/modules"
    FontPath     "/usr/share/fonts/X11/misc"
    FontPath     "/usr/share/fonts/X11/cyrillic"
    FontPath     "/usr/share/fonts/X11/100dpi/:unscaled"
    FontPath     "/usr/share/fonts/X11/75dpi/:unscaled"
    FontPath     "/usr/share/fonts/X11/Type1"
    FontPath     "/usr/share/fonts/X11/100dpi"
    FontPath     "/usr/share/fonts/X11/75dpi"
    FontPath     "built-ins"
EndSection

Section "Module"
    Load  "glx"
EndSection

Section "InputDevice"
    Identifier  "Keyboard0"
    Driver      "kbd"
EndSection

Section "InputDevice"
    Identifier  "Mouse0"
    Driver      "mouse"
    Option        "Protocol" "auto"
    Option        "Device" "/dev/input/mice"
    Option        "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
    Identifier   "Monitor0"
    VendorName   "Monitor Vendor"
    ModelName    "Monitor Model"
EndSection

Section "Monitor"
    Identifier   "Monitor1"
    VendorName   "Monitor Vendor"
    ModelName    "Monitor Model"
EndSection

Section "Monitor"
    Identifier   "Monitor2"
    VendorName   "Monitor Vendor"
    ModelName    "Monitor Model"
EndSection

Section "Monitor"
    Identifier   "Monitor3"
    VendorName   "Monitor Vendor"
    ModelName    "Monitor Model"
EndSection

Section "Monitor"
    Identifier   "Monitor4"
    VendorName   "Monitor Vendor"
    ModelName    "Monitor Model"
EndSection

Section "Monitor"
    Identifier   "Monitor5"
    VendorName   "Monitor Vendor"
    ModelName    "Monitor Model"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
        ### <percent>: "<f>%"
        ### [arg]: arg optional
        #Option     "NoAccel"                # [<bool>]
        #Option     "AccelMethod"            # <str>
        #Option     "Backlight"              # <str>
        #Option     "DRI"                    # <str>
        #Option     "ColorKey"               # <i>
        #Option     "VideoKey"               # <i>
        #Option     "Tiling"                 # [<bool>]
        #Option     "LinearFramebuffer"      # [<bool>]
        #Option     "SwapbuffersWait"        # [<bool>]
        #Option     "TripleBuffer"           # [<bool>]
        #Option     "XvPreferOverlay"        # [<bool>]
        #Option     "HotPlug"                # [<bool>]
        #Option     "ReprobeOutputs"         # [<bool>]
        #Option     "XvMC"                   # [<bool>]
        #Option     "ZaphodHeads"            # <str>
        #Option     "TearFree"               # [<bool>]
        #Option     "PerCrtcPixmaps"         # [<bool>]
        #Option     "FallbackDebug"          # [<bool>]
        #Option     "DebugFlushBatches"      # [<bool>]
        #Option     "DebugFlushCaches"       # [<bool>]
        #Option     "DebugWait"              # [<bool>]
        #Option     "BufferCache"            # [<bool>]
    Identifier  "Card0"
    Driver      "intel"
    BusID       "PCI:0:2:0"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
        ### <percent>: "<f>%"
        ### [arg]: arg optional
        #Option     "NoAccel"                # [<bool>]
        #Option     "AccelMethod"            # <str>
        #Option     "Backlight"              # <str>
        #Option     "DRI"                    # <str>
        #Option     "ColorKey"               # <i>
        #Option     "VideoKey"               # <i>
        #Option     "Tiling"                 # [<bool>]
        #Option     "LinearFramebuffer"      # [<bool>]
        #Option     "SwapbuffersWait"        # [<bool>]
        #Option     "TripleBuffer"           # [<bool>]
        #Option     "XvPreferOverlay"        # [<bool>]
        #Option     "HotPlug"                # [<bool>]
        #Option     "ReprobeOutputs"         # [<bool>]
        #Option     "XvMC"                   # [<bool>]
        #Option     "ZaphodHeads"            # <str>
        #Option     "TearFree"               # [<bool>]
        #Option     "PerCrtcPixmaps"         # [<bool>]
        #Option     "FallbackDebug"          # [<bool>]
        #Option     "DebugFlushBatches"      # [<bool>]
        #Option     "DebugFlushCaches"       # [<bool>]
        #Option     "DebugWait"              # [<bool>]
        #Option     "BufferCache"            # [<bool>]
    Identifier  "Card1"
    Driver      "intel"
    BusID       "PCI:0:2:1"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
        ### <percent>: "<f>%"
        ### [arg]: arg optional
        #Option     "SWcursor"               # [<bool>]
        #Option     "kmsdev"                 # <str>
        #Option     "ShadowFB"               # [<bool>]
    Identifier  "Card2"
    Driver      "modesetting"
    BusID       "PCI:0:2:0"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
        ### <percent>: "<f>%"
        ### [arg]: arg optional
        #Option     "SWcursor"               # [<bool>]
        #Option     "kmsdev"                 # <str>
        #Option     "ShadowFB"               # [<bool>]
    Identifier  "Card3"
    Driver      "modesetting"
    BusID       "PCI:0:2:1"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
        ### <percent>: "<f>%"
        ### [arg]: arg optional
        #Option     "ShadowFB"               # [<bool>]
        #Option     "Rotate"                 # <str>
        #Option     "fbdev"                  # <str>
        #Option     "debug"                  # [<bool>]
    Identifier  "Card4"
    Driver      "fbdev"
    BusID       "PCI:0:2:0"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
        ### <percent>: "<f>%"
        ### [arg]: arg optional
        #Option     "ShadowFB"               # [<bool>]
        #Option     "DefaultRefresh"         # [<bool>]
        #Option     "ModeSetClearScreen"     # [<bool>]
    Identifier  "Card5"
    Driver      "vesa"
    BusID       "PCI:0:2:0"
EndSection

Section "Screen"
    Identifier "Screen0"
    Device     "Card0"
    Monitor    "Monitor0"
    SubSection "Display"
        Viewport   0 0
        Depth     1
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     4
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     8
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     15
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     16
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     24
    EndSubSection
EndSection

Section "Screen"
    Identifier "Screen1"
    Device     "Card1"
    Monitor    "Monitor1"
    SubSection "Display"
        Viewport   0 0
        Depth     1
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     4
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     8
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     15
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     16
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     24
    EndSubSection
EndSection

Section "Screen"
    Identifier "Screen2"
    Device     "Card2"
    Monitor    "Monitor2"
    SubSection "Display"
        Viewport   0 0
        Depth     1
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     4
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     8
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     15
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     16
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     24
    EndSubSection
EndSection

Section "Screen"
    Identifier "Screen3"
    Device     "Card3"
    Monitor    "Monitor3"
    SubSection "Display"
        Viewport   0 0
        Depth     1
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     4
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     8
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     15
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     16
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     24
    EndSubSection
EndSection

Section "Screen"
    Identifier "Screen4"
    Device     "Card4"
    Monitor    "Monitor4"
    SubSection "Display"
        Viewport   0 0
        Depth     1
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     4
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     8
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     15
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     16
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     24
    EndSubSection
EndSection

Section "Screen"
    Identifier "Screen5"
    Device     "Card5"
    Monitor    "Monitor5"
    SubSection "Display"
        Viewport   0 0
        Depth     1
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     4
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     8
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     15
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     16
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     24
    EndSubSection
EndSection

Xorg.0.log:

Kod:

[    19.072] 
X.Org X Server 1.14.5
Release Date: 2013-12-12
[    19.072] X Protocol Version 11, Revision 0
[    19.072] Build Operating System: Linux 3.13.0-rc2-patser+ x86_64 Debian
[    19.072] Current Operating System: Linux debian 3.12-1-amd64 #1 SMP Debian 3.12.6-2 (2013-12-29) x86_64
[    19.072] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.12-1-amd64 root=UUID=bc845335-a8a3-4ba8-ae08-7e02f3305931 ro quiet
[    19.072] Build Date: 13 December 2013  10:12:53AM
[    19.072] xorg-server 2:1.14.5-1 (Maarten Lankhorst <maarten.lankhorst@ubuntu.com>) 
[    19.072] Current version of pixman: 0.32.4
[    19.072]     Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[    19.072] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    19.072] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jan 25 11:17:07 2014
[    19.095] (==) Using config file: "/etc/X11/xorg.conf"
[    19.095] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    19.174] (==) ServerLayout "X.org Configured"
[    19.174] (**) |-->Screen "Screen0" (0)
[    19.174] (**) |   |-->Monitor "Monitor0"
[    19.174] (**) |   |-->Device "Card0"
[    19.174] (**) |-->Screen "Screen1" (1)
[    19.174] (**) |   |-->Monitor "Monitor1"
[    19.174] (**) |   |-->Device "Card1"
[    19.174] (**) |-->Screen "Screen2" (2)
[    19.174] (**) |   |-->Monitor "Monitor2"
[    19.175] (**) |   |-->Device "Card2"
[    19.175] (**) |-->Screen "Screen3" (3)
[    19.175] (**) |   |-->Monitor "Monitor3"
[    19.175] (**) |   |-->Device "Card3"
[    19.175] (**) |-->Screen "Screen4" (4)
[    19.175] (**) |   |-->Monitor "Monitor4"
[    19.175] (**) |   |-->Device "Card4"
[    19.175] (**) |-->Screen "Screen5" (5)
[    19.175] (**) |   |-->Monitor "Monitor5"
[    19.175] (**) |   |-->Device "Card5"
[    19.176] (**) |-->Input Device "Mouse0"
[    19.176] (**) |-->Input Device "Keyboard0"
[    19.176] (==) Automatically adding devices
[    19.176] (==) Automatically enabling devices
[    19.176] (==) Automatically adding GPU devices
[    19.212] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    19.212]     Entry deleted from font path.
[    19.216] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    19.216]     Entry deleted from font path.
[    19.216] (**) FontPath set to:
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/100dpi/:unscaled,
    /usr/share/fonts/X11/75dpi/:unscaled,
    /usr/share/fonts/X11/Type1,
    /usr/share/fonts/X11/100dpi,
    /usr/share/fonts/X11/75dpi,
    built-ins,
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/100dpi/:unscaled,
    /usr/share/fonts/X11/75dpi/:unscaled,
    /usr/share/fonts/X11/Type1,
    /usr/share/fonts/X11/100dpi,
    /usr/share/fonts/X11/75dpi,
    built-ins
[    19.216] (**) ModulePath set to "/usr/lib/xorg/modules"
[    19.216] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[    19.216] (WW) Disabling Mouse0
[    19.216] (WW) Disabling Keyboard0
[    19.216] (II) Loader magic: 0x7fb9d19e4d00
[    19.216] (II) Module ABI versions:
[    19.216]     X.Org ANSI C Emulation: 0.4
[    19.216]     X.Org Video Driver: 14.1
[    19.216]     X.Org XInput driver : 19.1
[    19.216]     X.Org Server Extension : 7.0
[    19.217] (II) xfree86: Adding drm device (/dev/dri/card0)
[    19.220] (--) PCI:*(0:0:2:0) 8086:2a42:1179:ff51 rev 7, Mem @ 0xf4000000/4194304, 0xd0000000/268435456, I/O @ 0x00001800/8
[    19.221] (--) PCI: (0:0:2:1) 8086:2a43:1179:ff51 rev 7, Mem @ 0xf4400000/1048576
[    19.221] (II) Open ACPI successful (/var/run/acpid.socket)
[    19.228] Initializing built-in extension Generic Event Extension
[    19.228] Initializing built-in extension SHAPE
[    19.228] Initializing built-in extension MIT-SHM
[    19.228] Initializing built-in extension XInputExtension
[    19.228] Initializing built-in extension XTEST
[    19.228] Initializing built-in extension BIG-REQUESTS
[    19.228] Initializing built-in extension SYNC
[    19.228] Initializing built-in extension XKEYBOARD
[    19.228] Initializing built-in extension XC-MISC
[    19.228] Initializing built-in extension SECURITY
[    19.228] Initializing built-in extension XINERAMA
[    19.228] Initializing built-in extension XFIXES
[    19.228] Initializing built-in extension RENDER
[    19.228] Initializing built-in extension RANDR
[    19.228] Initializing built-in extension COMPOSITE
[    19.228] Initializing built-in extension DAMAGE
[    19.228] Initializing built-in extension MIT-SCREEN-SAVER
[    19.228] Initializing built-in extension DOUBLE-BUFFER
[    19.229] Initializing built-in extension RECORD
[    19.229] Initializing built-in extension DPMS
[    19.229] Initializing built-in extension X-Resource
[    19.229] Initializing built-in extension XVideo
[    19.229] Initializing built-in extension XVideo-MotionCompensation
[    19.229] Initializing built-in extension SELinux
[    19.229] Initializing built-in extension XFree86-VidModeExtension
[    19.229] Initializing built-in extension XFree86-DGA
[    19.229] Initializing built-in extension XFree86-DRI
[    19.229] Initializing built-in extension DRI2
[    19.229] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[    19.229] (II) LoadModule: "glx"
[    19.240] (II) Loading /usr/lib/xorg/modules/linux/libglx.so
[    19.268] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[    19.268]     compiled for 6.9.0, module version = 1.0.0
[    19.268] Loading extension GLX
[    19.268] (II) LoadModule: "intel"
[    19.284] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    19.347] (II) Module intel: vendor="X.Org Foundation"
[    19.347]     compiled for 1.14.3, module version = 2.21.15
[    19.347]     Module class: X.Org Video Driver
[    19.347]     ABI class: X.Org Video Driver, version 14.1
[    19.347] (II) LoadModule: "modesetting"
[    19.348] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    19.359] (II) Module modesetting: vendor="X.Org Foundation"
[    19.359]     compiled for 1.14.3, module version = 0.8.1
[    19.359]     Module class: X.Org Video Driver
[    19.359]     ABI class: X.Org Video Driver, version 14.1
[    19.359] (II) LoadModule: "fbdev"
[    19.359] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    19.368] (II) Module fbdev: vendor="X.Org Foundation"
[    19.368]     compiled for 1.14.3, module version = 0.4.4
[    19.368]     Module class: X.Org Video Driver
[    19.368]     ABI class: X.Org Video Driver, version 14.1
[    19.368] (II) LoadModule: "vesa"
[    19.368] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    19.375] (II) Module vesa: vendor="X.Org Foundation"
[    19.375]     compiled for 1.14.3, module version = 2.3.3
[    19.375]     Module class: X.Org Video Driver
[    19.375]     ABI class: X.Org Video Driver, version 14.1
[    19.375] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
    i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
    915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
    Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
    GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,
    HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,
    HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,
    HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100,
    HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200
[    19.377] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    19.377] (II) FBDEV: driver for framebuffer: fbdev
[    19.377] (II) VESA: driver for VESA chipsets: vesa
[    19.377] (++) using VT number 7

[    19.399] (WW) Falling back to old probe method for modesetting
[    19.400] (WW) Falling back to old probe method for fbdev
[    19.400] (II) Loading sub module "fbdevhw"
[    19.400] (II) LoadModule: "fbdevhw"
[    19.400] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    19.417] (II) Module fbdevhw: vendor="X.Org Foundation"
[    19.417]     compiled for 1.14.5, module version = 0.0.2
[    19.417]     ABI class: X.Org Video Driver, version 14.1
[    19.417] (WW) Falling back to old probe method for vesa
[    19.417] (EE) Screen 1 deleted because of no matching config section.
[    19.417] (II) UnloadModule: "modesetting"
[    19.418] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    19.418] (==) intel(0): RGB weight 888
[    19.418] (==) intel(0): Default visual is TrueColor
[    19.418] (--) intel(0): Integrated Graphics Chipset: Intel(R) GM45
[    19.418] (**) intel(0): Relaxed fencing enabled
[    19.418] (**) intel(0): Wait on SwapBuffers? enabled
[    19.418] (**) intel(0): Triple buffering? enabled
[    19.418] (**) intel(0): Framebuffer tiled
[    19.418] (**) intel(0): Pixmaps tiled
[    19.418] (**) intel(0): 3D buffers tiled
[    19.418] (**) intel(0): SwapBuffers wait enabled
[    19.418] (==) intel(0): video overlay key set to 0x101fe
[    19.418] (II) intel(0): Output LVDS1 using monitor section Monitor0
[    19.419] (--) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[    19.448] (II) intel(0): Output VGA1 has no monitor section
[    19.456] (II) intel(0): Output HDMI1 has no monitor section
[    19.504] (II) intel(0): Output DP1 has no monitor section
[    19.504] (II) intel(0): Output DP2 has no monitor section
[    19.773] (II) intel(0): Output TV1 has no monitor section
[    19.774] (II) intel(0): EDID for output LVDS1
[    19.774] (II) intel(0): Manufacturer: SEC  Model: 3741  Serial#: 0
[    19.774] (II) intel(0): Year: 2007  Week: 0
[    19.774] (II) intel(0): EDID Version: 1.3
[    19.774] (II) intel(0): Digital Display Input
[    19.774] (II) intel(0): Max Image Size [cm]: horiz.: 29  vert.: 18
[    19.774] (II) intel(0): Gamma: 2.20
[    19.774] (II) intel(0): No DPMS capabilities specified
[    19.774] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    19.774] (II) intel(0): First detailed timing is preferred mode
[    19.774] (II) intel(0): redX: 0.580 redY: 0.340   greenX: 0.320 greenY: 0.540
[    19.774] (II) intel(0): blueX: 0.155 blueY: 0.130   whiteX: 0.313 whiteY: 0.329
[    19.774] (II) intel(0): Manufacturer's mask: 0
[    19.774] (II) intel(0): Supported detailed timing:
[    19.774] (II) intel(0): clock: 71.0 MHz   Image Size:  286 x 179 mm
[    19.774] (II) intel(0): h_active: 1280  h_sync: 1328  h_sync_end 1360 h_blank_end 1440 h_border: 0
[    19.774] (II) intel(0): v_active: 800  v_sync: 803  v_sync_end 809 v_blanking: 823 v_border: 0
[    19.774] (II) intel(0): Unknown vendor-specific block f
[    19.774] (II) intel(0):  SAMSUNG
[    19.774] (II) intel(0):  LTN133AT07G01
[    19.774] (II) intel(0): EDID (in hex):
[    19.774] (II) intel(0):     00ffffffffffff004ca3413700000000
[    19.774] (II) intel(0):     00110103801d12780a81d59457528a27
[    19.774] (II) intel(0):     21505400000001010101010101010101
[    19.774] (II) intel(0):     010101010101bc1b00a0502017303020
[    19.775] (II) intel(0):     36001eb3100000190000000f00000000
[    19.775] (II) intel(0):     00000000002387026400000000fe0053
[    19.775] (II) intel(0):     414d53554e470a2020202020000000fe
[    19.775] (II) intel(0):     004c544e313333415430374730310086
[    19.775] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[    19.775] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    19.775] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    19.775] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[    19.775] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[    19.775] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[    19.775] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[    19.775] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[    19.775] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[    19.775] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[    19.775] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[    19.775] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[    19.775] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[    19.775] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[    19.775] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[    19.775] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[    19.775] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[    19.775] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[    19.776] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[    19.776] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[    19.776] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[    19.776] (II) intel(0): Printing probed modes for output LVDS1
[    19.776] (II) intel(0): Modeline "1280x800"x59.9   71.00  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (49.3 kHz eP)
[    19.776] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[    19.776] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[    19.776] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[    19.776] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[    19.800] (II) intel(0): EDID for output VGA1
[    19.808] (II) intel(0): EDID for output HDMI1
[    19.856] (II) intel(0): EDID for output DP1
[    19.856] (II) intel(0): EDID for output DP2
[    20.117] (II) intel(0): EDID for output TV1
[    20.117] (II) intel(0): Output LVDS1 connected
[    20.117] (II) intel(0): Output VGA1 disconnected
[    20.117] (II) intel(0): Output HDMI1 disconnected
[    20.117] (II) intel(0): Output DP1 disconnected
[    20.117] (II) intel(0): Output DP2 disconnected
[    20.117] (II) intel(0): Output TV1 disconnected
[    20.118] (II) intel(0): Using exact sizes for initial modes
[    20.118] (II) intel(0): Output LVDS1 using initial mode 1280x800
[    20.118] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    20.118] (II) intel(0): Kernel page flipping support detected, enabling
[    20.118] (==) intel(0): DPI set to (96, 96)
[    20.118] (II) Loading sub module "fb"
[    20.118] (II) LoadModule: "fb"
[    20.118] (II) Loading /usr/lib/xorg/modules/libfb.so
[    20.165] (II) Module fb: vendor="X.Org Foundation"
[    20.165]     compiled for 1.14.5, module version = 1.0.0
[    20.165]     ABI class: X.Org ANSI C Emulation, version 0.4
[    20.165] (II) Loading sub module "dri2"
[    20.165] (II) LoadModule: "dri2"
[    20.165] (II) Module "dri2" already built-in
[    20.165] (II) UnloadModule: "fbdev"
[    20.165] (II) Unloading fbdev
[    20.165] (II) UnloadSubModule: "fbdevhw"
[    20.165] (II) Unloading fbdevhw
[    20.165] (II) UnloadModule: "vesa"
[    20.165] (II) Unloading vesa
[    20.166] (==) Depth 24 pixmap format is 32 bpp
[    20.178] (II) intel(0): [DRI2] Setup complete
[    20.178] (II) intel(0): [DRI2]   DRI driver: i965
[    20.178] (II) intel(0): Allocated new frame buffer 1280x800 stride 5120, tiled
[    20.195] (II) UXA(0): Driver registered support for the following operations:
[    20.195] (II)         solid
[    20.195] (II)         copy
[    20.195] (II)         composite (RENDER acceleration)
[    20.195] (II)         put_image
[    20.195] (II)         get_image
[    20.195] (==) intel(0): Backing store disabled
[    20.195] (==) intel(0): Silken mouse enabled
[    20.196] (II) intel(0): Initializing HW Cursor
[    20.196] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    20.204] (==) intel(0): DPMS enabled
[    20.204] (==) intel(0): Intel XvMC decoder enabled
[    20.204] (II) intel(0): Set up textured video
[    20.204] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[    20.205] (II) intel(0): direct rendering: DRI2 Enabled
[    20.205] (==) intel(0): hotplug detection: "enabled"
[    20.228] (--) RandR disabled
[    20.236] (II) SELinux: Disabled on system
[    20.237] (EE) GLX error: Can not get required symbols.
[    20.237] (II) intel(0): Setting screen physical size to 338 x 211
[    20.615] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    20.615] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    20.615] (II) LoadModule: "evdev"
[    20.640] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    20.658] (II) Module evdev: vendor="X.Org Foundation"
[    20.658]     compiled for 1.14.3, module version = 2.8.2
[    20.658]     Module class: X.Org XInput Driver
[    20.658]     ABI class: X.Org XInput driver, version 19.1
[    20.658] (II) Using input driver 'evdev' for 'Power Button'
[    20.659] (**) Power Button: always reports core events
[    20.659] (**) evdev: Power Button: Device: "/dev/input/event3"
[    20.659] (--) evdev: Power Button: Vendor 0 Product 0x1
[    20.659] (--) evdev: Power Button: Found keys
[    20.659] (II) evdev: Power Button: Configuring as keyboard
[    20.659] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event3"
[    20.659] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    20.659] (**) Option "xkb_rules" "evdev"
[    20.659] (**) Option "xkb_model" "pc105"
[    20.659] (**) Option "xkb_layout" "pl"
[    20.723] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[    20.724] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    20.724] (II) Using input driver 'evdev' for 'Video Bus'
[    20.724] (**) Video Bus: always reports core events
[    20.724] (**) evdev: Video Bus: Device: "/dev/input/event7"
[    20.724] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    20.724] (--) evdev: Video Bus: Found keys
[    20.724] (II) evdev: Video Bus: Configuring as keyboard
[    20.724] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input15/event7"
[    20.724] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    20.724] (**) Option "xkb_rules" "evdev"
[    20.724] (**) Option "xkb_model" "pc105"
[    20.724] (**) Option "xkb_layout" "pl"
[    20.724] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    20.724] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    20.725] (II) Using input driver 'evdev' for 'Power Button'
[    20.725] (**) Power Button: always reports core events
[    20.725] (**) evdev: Power Button: Device: "/dev/input/event1"
[    20.725] (--) evdev: Power Button: Vendor 0 Product 0x1
[    20.725] (--) evdev: Power Button: Found keys
[    20.725] (II) evdev: Power Button: Configuring as keyboard
[    20.725] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5/event1"
[    20.725] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[    20.725] (**) Option "xkb_rules" "evdev"
[    20.725] (**) Option "xkb_model" "pc105"
[    20.725] (**) Option "xkb_layout" "pl"
[    20.725] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[    20.725] (II) No input driver specified, ignoring this device.
[    20.725] (II) This device may have been added with another device file.
[    20.725] (II) config/udev: Adding drm device (/dev/dri/card0)
[    20.726] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event9)
[    20.726] (II) No input driver specified, ignoring this device.
[    20.726] (II) This device may have been added with another device file.
[    20.726] (II) config/udev: Adding input device HDA Intel HDMI/DP,pcm=3 (/dev/input/event10)
[    20.726] (II) No input driver specified, ignoring this device.
[    20.726] (II) This device may have been added with another device file.
[    20.727] (II) config/udev: Adding input device PixArt USB Optical Mouse (/dev/input/event6)
[    20.727] (**) PixArt USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[    20.727] (II) Using input driver 'evdev' for 'PixArt USB Optical Mouse'
[    20.727] (**) PixArt USB Optical Mouse: always reports core events
[    20.727] (**) evdev: PixArt USB Optical Mouse: Device: "/dev/input/event6"
[    20.727] (--) evdev: PixArt USB Optical Mouse: Vendor 0x93a Product 0x2510
[    20.727] (--) evdev: PixArt USB Optical Mouse: Found 3 mouse buttons
[    20.727] (--) evdev: PixArt USB Optical Mouse: Found scroll wheel(s)
[    20.727] (--) evdev: PixArt USB Optical Mouse: Found relative axes
[    20.727] (--) evdev: PixArt USB Optical Mouse: Found x and y relative axes
[    20.727] (II) evdev: PixArt USB Optical Mouse: Configuring as mouse
[    20.727] (II) evdev: PixArt USB Optical Mouse: Adding scrollwheel support
[    20.727] (**) evdev: PixArt USB Optical Mouse: YAxisMapping: buttons 4 and 5
[    20.727] (**) evdev: PixArt USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    20.727] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1:1.0/input/input14/event6"
[    20.727] (II) XINPUT: Adding extended input device "PixArt USB Optical Mouse" (type: MOUSE, id 9)
[    20.727] (II) evdev: PixArt USB Optical Mouse: initialized for relative axes.
[    20.727] (**) PixArt USB Optical Mouse: (accel) keeping acceleration scheme 1
[    20.727] (**) PixArt USB Optical Mouse: (accel) acceleration profile 0
[    20.727] (**) PixArt USB Optical Mouse: (accel) acceleration factor: 2.000
[    20.727] (**) PixArt USB Optical Mouse: (accel) acceleration threshold: 4
[    20.728] (II) config/udev: Adding input device PixArt USB Optical Mouse (/dev/input/mouse0)
[    20.728] (II) No input driver specified, ignoring this device.
[    20.728] (II) This device may have been added with another device file.
[    20.728] (II) config/udev: Adding input device USB 2.0 Camera (/dev/input/event8)
[    20.728] (**) USB 2.0 Camera: Applying InputClass "evdev keyboard catchall"
[    20.728] (II) Using input driver 'evdev' for 'USB 2.0 Camera'
[    20.728] (**) USB 2.0 Camera: always reports core events
[    20.728] (**) evdev: USB 2.0 Camera: Device: "/dev/input/event8"
[    20.728] (--) evdev: USB 2.0 Camera: Vendor 0xc45 Product 0x62c0
[    20.728] (--) evdev: USB 2.0 Camera: Found keys
[    20.728] (II) evdev: USB 2.0 Camera: Configuring as keyboard
[    20.728] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb8/8-4/8-4:1.0/input/input16/event8"
[    20.728] (II) XINPUT: Adding extended input device "USB 2.0 Camera" (type: KEYBOARD, id 10)
[    20.728] (**) Option "xkb_rules" "evdev"
[    20.728] (**) Option "xkb_model" "pc105"
[    20.728] (**) Option "xkb_layout" "pl"
[    20.729] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    20.729] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    20.729] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    20.729] (**) AT Translated Set 2 keyboard: always reports core events
[    20.729] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[    20.729] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    20.729] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    20.729] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    20.729] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    20.729] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[    20.729] (**) Option "xkb_rules" "evdev"
[    20.729] (**) Option "xkb_model" "pc105"
[    20.729] (**) Option "xkb_layout" "pl"
[    20.730] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event11)
[    20.730] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[    20.730] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[    20.730] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[    20.730] (II) LoadModule: "synaptics"
[    20.730] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    20.742] (II) Module synaptics: vendor="X.Org Foundation"
[    20.742]     compiled for 1.14.5, module version = 1.7.3
[    20.742]     Module class: X.Org XInput Driver
[    20.742]     ABI class: X.Org XInput driver, version 19.1
[    20.742] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[    20.742] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    20.742] (**) Option "Device" "/dev/input/event11"
[    20.916] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5510 (res 74)
[    20.916] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4672 (res 116)
[    20.916] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[    20.916] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[    20.916] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right
[    20.916] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[    20.916] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    20.916] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    20.996] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input13/event11"
[    20.996] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
[    20.996] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[    20.996] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[    20.996] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.039
[    20.997] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[    20.997] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[    20.997] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    20.997] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    20.997] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    20.997] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[    20.997] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[    20.998] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[    20.998] (II) No input driver specified, ignoring this device.
[    20.998] (II) This device may have been added with another device file.
[    20.999] (II) config/udev: Adding input device ACPI Virtual Keyboard Device (/dev/input/event12)
[    20.999] (**) ACPI Virtual Keyboard Device: Applying InputClass "evdev keyboard catchall"
[    20.999] (II) Using input driver 'evdev' for 'ACPI Virtual Keyboard Device'
[    20.999] (**) ACPI Virtual Keyboard Device: always reports core events
[    20.999] (**) evdev: ACPI Virtual Keyboard Device: Device: "/dev/input/event12"
[    20.999] (--) evdev: ACPI Virtual Keyboard Device: Vendor 0 Product 0
[    20.999] (--) evdev: ACPI Virtual Keyboard Device: Found keys
[    20.999] (II) evdev: ACPI Virtual Keyboard Device: Configuring as keyboard
[    20.999] (**) Option "config_info" "udev:/sys/devices/virtual/input/input19/event12"
[    20.999] (II) XINPUT: Adding extended input device "ACPI Virtual Keyboard Device" (type: KEYBOARD, id 13)
[    20.999] (**) Option "xkb_rules" "evdev"
[    20.999] (**) Option "xkb_model" "pc105"
[    21.000] (**) Option "xkb_layout" "pl"
[    21.001] (II) config/udev: Adding input device Toshiba input device (/dev/input/event4)
[    21.001] (**) Toshiba input device: Applying InputClass "evdev keyboard catchall"
[    21.001] (II) Using input driver 'evdev' for 'Toshiba input device'
[    21.001] (**) Toshiba input device: always reports core events
[    21.001] (**) evdev: Toshiba input device: Device: "/dev/input/event4"
[    21.001] (--) evdev: Toshiba input device: Vendor 0 Product 0
[    21.001] (--) evdev: Toshiba input device: Found keys
[    21.001] (II) evdev: Toshiba input device: Configuring as keyboard
[    21.001] (**) Option "config_info" "udev:/sys/devices/virtual/input/input8/event4"
[    21.001] (II) XINPUT: Adding extended input device "Toshiba input device" (type: KEYBOARD, id 14)
[    21.001] (**) Option "xkb_rules" "evdev"
[    21.001] (**) Option "xkb_model" "pc105"
[    21.001] (**) Option "xkb_layout" "pl"
[   222.369] (II) config/udev: removing device PixArt USB Optical Mouse
[   222.369] (II) evdev: PixArt USB Optical Mouse: Close
[   222.369] (II) UnloadModule: "evdev"
[   224.067] (II) config/udev: Adding input device PixArt USB Optical Mouse (/dev/input/event6)
[   224.067] (**) PixArt USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[   224.067] (II) Using input driver 'evdev' for 'PixArt USB Optical Mouse'
[   224.067] (**) PixArt USB Optical Mouse: always reports core events
[   224.067] (**) evdev: PixArt USB Optical Mouse: Device: "/dev/input/event6"
[   224.076] (--) evdev: PixArt USB Optical Mouse: Vendor 0x93a Product 0x2510
[   224.076] (--) evdev: PixArt USB Optical Mouse: Found 3 mouse buttons
[   224.076] (--) evdev: PixArt USB Optical Mouse: Found scroll wheel(s)
[   224.076] (--) evdev: PixArt USB Optical Mouse: Found relative axes
[   224.076] (--) evdev: PixArt USB Optical Mouse: Found x and y relative axes
[   224.076] (II) evdev: PixArt USB Optical Mouse: Configuring as mouse
[   224.076] (II) evdev: PixArt USB Optical Mouse: Adding scrollwheel support
[   224.076] (**) evdev: PixArt USB Optical Mouse: YAxisMapping: buttons 4 and 5
[   224.076] (**) evdev: PixArt USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   224.076] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1:1.0/input/input20/event6"
[   224.076] (II) XINPUT: Adding extended input device "PixArt USB Optical Mouse" (type: MOUSE, id 9)
[   224.076] (II) evdev: PixArt USB Optical Mouse: initialized for relative axes.
[   224.076] (**) PixArt USB Optical Mouse: (accel) keeping acceleration scheme 1
[   224.076] (**) PixArt USB Optical Mouse: (accel) acceleration profile 0
[   224.076] (**) PixArt USB Optical Mouse: (accel) acceleration factor: 2.000
[   224.076] (**) PixArt USB Optical Mouse: (accel) acceleration threshold: 4
[   224.077] (II) config/udev: Adding input device PixArt USB Optical Mouse (/dev/input/mouse0)
[   224.077] (II) No input driver specified, ignoring this device.
[   224.077] (II) This device may have been added with another device file.

Offline

 

#2  2014-01-25 13:02:48

  krasnij - oj tam

krasnij
oj tam
Skąd: z JO73VT
Zarejestrowany: 2012-05-04
Serwis

Re: Tryb graficzny działa tylko dla root'a

Xorg.conf jest w ogóle niepotrzebny. Proponuje wywalić jeżeli nie musisz na sztywno dopisywać konkretnych opcji. Potem powinno ruszyć.

Ostatnio edytowany przez krasnij (2014-01-25 13:06:34)

Pozdrawiam i życzę sukcesów :)
The truth is out there.

Offline

 

#3  2014-01-25 13:07:42

  ilin - Palacz

ilin
Palacz
Skąd: PRLu
Zarejestrowany: 2006-05-03

Re: Tryb graficzny działa tylko dla root'a

Jeśli na roocie xy wstają to nie w ustawieniach grafiki trzeba szukać.

Co się dzieje dokładnie przy próbie zalogowania na konto użytkownika bezpośrednio po starcie systemu ?

Problemy rozwiązujemy na forum nie na PW -> Niech inni na tym skorzystają.
Polski portal Debiana

Offline

 

#4  2014-01-25 13:17:04

  yossarian - Szczawiożerca

yossarian
Szczawiożerca
Skąd: Shangri-La
Zarejestrowany: 2011-04-25

Re: Tryb graficzny działa tylko dla root'a

I pokaż wynik:

Kod:

df -h

Wygląda na brak miejsca w Twoim katalogu użytkownika lub jakiś problem z uprawnieniami w tym katalogu.
A sam xorg.conf jest rzeczywiście niepotrzebny.

Offline

 

#5  2014-01-25 13:22:30

  ilin - Palacz

ilin
Palacz
Skąd: PRLu
Zarejestrowany: 2006-05-03

Re: Tryb graficzny działa tylko dla root'a

Wygląda, że instalowane było na "starej" instalacji skoro /home/xxx miał 100%

Albo coś uprawnieniami albo coć z configami np ~/.dmrc ustawiony na środowisko graficzne którego nie ma.

Problemy rozwiązujemy na forum nie na PW -> Niech inni na tym skorzystają.
Polski portal Debiana

Offline

 

#6  2014-01-25 13:33:18

  uasic - Użytkownik

uasic
Użytkownik
Zarejestrowany: 2014-01-25

Re: Tryb graficzny działa tylko dla root'a

ilin napisał(-a):

Wygląda, że instalowane było na "starej" instalacji skoro /home/xxx miał 100%

Albo coś uprawnieniami albo coć z configami np ~/.dmrc ustawiony na środowisko graficzne którego nie ma.

Na starej, bo wcześniej na tym kompie był Wheezy. Formatowałam partycję z /, a /home została niesformatowana.


Kod:

root@debian:~# df -h
System plików  rozm. użyte dost. %uż. zamont. na
/dev/sda2        33G  3,1G   28G  10% /
udev             10M     0   10M   0% /dev
tmpfs           289M  736K  288M   1% /run
tmpfs           5,0M     0  5,0M   0% /run/lock
tmpfs           2,2G  152K  2,2G   1% /run/shm
/dev/sda3       106G   86G   16G  85% /home
none            4,0K     0  4,0K   0% /sys/fs/cgroup

ilin napisał(-a):

Jeśli na roocie xy wstają to nie w ustawieniach grafiki trzeba szukać.

Co się dzieje dokładnie przy próbie zalogowania na konto użytkownika bezpośrednio po starcie systemu ?

Menedżer logowania wyglądał normalnie, a potem albo była ciemność albo było widać kursor. Teraz jak pokombinowałam z jakimiś cudzymi rozwiązaniami z netu, to i menedżera logowania nie ma, tylko buźka z "oops, something went wrong".

Miałam wcześniej Gnome, ale był niesamowicie wolny po aktualizacji, więc zainstalowałam Xfce i było ok. Potem nie uruchomił się i doszłam do tego, że partycja jest pełna. Po zrobieniu miejsca dalej nic, więc się poddałam, zainstalowałam system od początku bez środowiska graficznego i doinstalowałam tylko Xfce no i jest jak jest:/

Offline

 

#7  2014-01-25 13:36:49

  ilin - Palacz

ilin
Palacz
Skąd: PRLu
Zarejestrowany: 2006-05-03

Re: Tryb graficzny działa tylko dla root'a

Nazwa użytkownika jest taka sama jak na starej instalacji czy inna ?

Problemy rozwiązujemy na forum nie na PW -> Niech inni na tym skorzystają.
Polski portal Debiana

Offline

 

#8  2014-01-25 13:37:38

  uasic - Użytkownik

uasic
Użytkownik
Zarejestrowany: 2014-01-25

Re: Tryb graficzny działa tylko dla root'a

Taka sama.

Offline

 

#9  2014-01-25 13:39:22

  yossarian - Szczawiożerca

yossarian
Szczawiożerca
Skąd: Shangri-La
Zarejestrowany: 2011-04-25

Re: Tryb graficzny działa tylko dla root'a

Zrób nowego użyszkodnika i pewnie tam już się uruchomi.
Napisz co to za dziwne rozwiązania stosowałeś.
Jaki masz menedżer logowania?
Możesz dla pewności zrobić tak:

Kod:

chown -R nazwa_użytkownika:nazwa_użytkownika /home/nazwa_uzytkownika

Offline

 

#10  2014-01-25 13:39:56

  ilin - Palacz

ilin
Palacz
Skąd: PRLu
Zarejestrowany: 2006-05-03

Re: Tryb graficzny działa tylko dla root'a

To z roota

Kod:

chown -R nazwa_użytkownika /home/nazwa_użytkownika

Kod:

rm /home/nazwa_użytkownika/.dmrc

Potem próbuj się zalogować.

yossarian szybszy  :)

Problemy rozwiązujemy na forum nie na PW -> Niech inni na tym skorzystają.
Polski portal Debiana

Offline

 

#11  2014-01-25 14:26:54

  uasic - Użytkownik

uasic
Użytkownik
Zarejestrowany: 2014-01-25

Re: Tryb graficzny działa tylko dla root'a

yossarian napisał(-a):

Zrób nowego użyszkodnika i pewnie tam już się uruchomi.
Napisz co to za dziwne rozwiązania stosowałeś.
Jaki masz menedżer logowania?
Możesz dla pewności zrobić tak:

Kod:

chown -R nazwa_użytkownika:nazwa_użytkownika /home/nazwa_uzytkownika

Działa na nowym, dzięki:)

Menedżer gdm3 (on odmawia współpracy dalej, ale pomyślę o tym, jak sobie przeniosę wszystko z katalogu domowego starego).

Offline

 

#12  2014-01-25 14:32:08

  yossarian - Szczawiożerca

yossarian
Szczawiożerca
Skąd: Shangri-La
Zarejestrowany: 2011-04-25

Re: Tryb graficzny działa tylko dla root'a

To problem stwarzają jakieś stare pliki konfiguracyjne.
Możesz usuwać/kopiować niektóre i tak sprawdzać który był problematyczny lub, tak jak teraz robisz, przenieść najistotniejsze rzeczy na nowe konto.

Offline

 

 

Strony: 1

Stopka forum

Powered by PunBB
© Copyright 2002–2005 Rickard Andersson
Możesz wyłączyć AdBlock — tu nie ma reklam ;-)