Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!

Ogłoszenie

Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.

#1  2013-11-26 21:53:38

  Miziak - Użytkownik

Miziak
Użytkownik
Skąd: ok. Płocka
Zarejestrowany: 2010-11-03

Nvidia Optimus problem po aktualizacji.

Witam do wczoraj kiedy zaktualizowałem wspomniana technologia działała(przez bumblebee) gorzej czy lepiej nie ma znaczenia ale działała. Po aktualizacji systemu nie wstał mi xserver ale przeinstalowałem je i znów ładnie wstały ale kiedy chciałem odpalić grę na wine ona nie wstała, więc sprawdziłem polecenie:

Kod:

optirun glxgears

Na początku wywaliło coś o nieznanym sterowniku ale o tym było na wiki debiana wystarczyło zamienić nvidia na nvidia-current.
Ale mimo to to nie rozwiązało problemu utknąłem na kolejnym błędzie:

Kod:

miziak@debian:~$ optirun glxgears
[ 1306.200042] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) NVIDIA(0): Failed to initialize the NVIDIA kernel module. Please see the

[ 1306.200086] [ERROR]Aborting because fallback start is disabled.

Kilka informacji na temat systemu/sprzętu:

Kod:

miziak@debian:~$ lspci | grep VGA
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
01:00.0 VGA compatible controller: NVIDIA Corporation GK107M [GeForce GT 645M] (rev a1)

Kod:

miziak@debian:~$ lsmod | grep nv
nvidia               9438739  0 
i2c_core               24084  7 drm,i915,i2c_i801,drm_kms_helper,i2c_algo_bit,nvidia,videodev
miziak@debian:~$ lsmod | grep no[/quote]
[quote]miziak@debian:~$ uname -a
Linux debian 3.11-2-amd64 #1 SMP Debian 3.11.8-1 (2013-11-13) x86_64 GNU/Linux

Kod:

miziak@debian:~$ cat /var/log/Xorg.0.log
[    24.085] 
X.Org X Server 1.14.3
Release Date: 2013-09-12
[    24.085] X Protocol Version 11, Revision 0
[    24.085] Build Operating System: Linux 3.10-2-amd64 x86_64 Debian
[    24.085] Current Operating System: Linux debian 3.11-2-amd64 #1 SMP Debian 3.11.8-1 (2013-11-13) x86_64
[    24.085] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.11-2-amd64 root=UUID=8c7f039c-af9a-4bfd-a23d-1c8a58231204 ro quiet
[    24.085] Build Date: 05 October 2013  02:04:26PM
[    24.085] xorg-server 2:1.14.3-4 (Julien Cristau <jcristau@debian.org>) 
[    24.085] Current version of pixman: 0.30.2
[    24.085]     Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[    24.085] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    24.085] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Nov 26 21:23:29 2013
[    24.248] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    24.310] (==) No Layout section.  Using the first Screen section.
[    24.310] (==) No screen section available. Using defaults.
[    24.310] (**) |-->Screen "Default Screen Section" (0)
[    24.310] (**) |   |-->Monitor "<default monitor>"
[    24.326] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
[    24.326] (==) Automatically adding devices
[    24.326] (==) Automatically enabling devices
[    24.326] (==) Automatically adding GPU devices
[    24.395] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    24.395]     Entry deleted from font path.
[    24.395] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    24.395]     Entry deleted from font path.
[    24.395] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    24.395]     Entry deleted from font path.
[    24.422] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    24.422]     Entry deleted from font path.
[    24.422] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    24.422]     Entry deleted from font path.
[    24.422] (==) FontPath set to:
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/Type1,
    built-ins
[    24.422] (==) ModulePath set to "/usr/lib/xorg/modules"
[    24.422] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
[    24.432] (II) Loader magic: 0x7fd6d8fa0d00
[    24.432] (II) Module ABI versions:
[    24.432]     X.Org ANSI C Emulation: 0.4
[    24.432]     X.Org Video Driver: 14.1
[    24.432]     X.Org XInput driver : 19.1
[    24.432]     X.Org Server Extension : 7.0
[    24.432] (II) xfree86: Adding drm device (/dev/dri/card0)
[    24.433] (--) PCI:*(0:0:2:0) 8086:0166:17aa:3904 rev 9, Mem @ 0xd3000000/4194304, 0xe0000000/268435456, I/O @ 0x00004000/64
[    24.434] (II) Open ACPI successful (/var/run/acpid.socket)
[    24.434] Initializing built-in extension Generic Event Extension
[    24.434] Initializing built-in extension SHAPE
[    24.434] Initializing built-in extension MIT-SHM
[    24.434] Initializing built-in extension XInputExtension
[    24.434] Initializing built-in extension XTEST
[    24.434] Initializing built-in extension BIG-REQUESTS
[    24.434] Initializing built-in extension SYNC
[    24.434] Initializing built-in extension XKEYBOARD
[    24.434] Initializing built-in extension XC-MISC
[    24.434] Initializing built-in extension SECURITY
[    24.434] Initializing built-in extension XINERAMA
[    24.434] Initializing built-in extension XFIXES
[    24.434] Initializing built-in extension RENDER
[    24.434] Initializing built-in extension RANDR
[    24.434] Initializing built-in extension COMPOSITE
[    24.434] Initializing built-in extension DAMAGE
[    24.434] Initializing built-in extension MIT-SCREEN-SAVER
[    24.434] Initializing built-in extension DOUBLE-BUFFER
[    24.434] Initializing built-in extension RECORD
[    24.434] Initializing built-in extension DPMS
[    24.434] Initializing built-in extension X-Resource
[    24.434] Initializing built-in extension XVideo
[    24.434] Initializing built-in extension XVideo-MotionCompensation
[    24.434] Initializing built-in extension SELinux
[    24.434] Initializing built-in extension XFree86-VidModeExtension
[    24.434] Initializing built-in extension XFree86-DGA
[    24.434] Initializing built-in extension XFree86-DRI
[    24.434] Initializing built-in extension DRI2
[    24.434] (II) LoadModule: "glx"
[    24.484] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    24.499] (II) Module glx: vendor="X.Org Foundation"
[    24.500]     compiled for 1.14.3, module version = 1.0.0
[    24.500]     ABI class: X.Org Server Extension, version 7.0
[    24.500] (==) AIGLX enabled
[    24.500] Loading extension GLX
[    24.500] (==) Matched intel as autoconfigured driver 0
[    24.500] (==) Matched intel as autoconfigured driver 1
[    24.500] (==) Matched vesa as autoconfigured driver 2
[    24.500] (==) Matched modesetting as autoconfigured driver 3
[    24.500] (==) Matched fbdev as autoconfigured driver 4
[    24.500] (==) Assigned the driver to the xf86ConfigLayout
[    24.500] (II) LoadModule: "intel"
[    24.500] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    24.601] (II) Module intel: vendor="X.Org Foundation"
[    24.601]     compiled for 1.14.3, module version = 2.21.15
[    24.601]     Module class: X.Org Video Driver
[    24.601]     ABI class: X.Org Video Driver, version 14.1
[    24.601] (II) LoadModule: "vesa"
[    24.601] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    24.619] (II) Module vesa: vendor="X.Org Foundation"
[    24.619]     compiled for 1.14.3, module version = 2.3.3
[    24.619]     Module class: X.Org Video Driver
[    24.619]     ABI class: X.Org Video Driver, version 14.1
[    24.619] (II) LoadModule: "modesetting"
[    24.619] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    24.638] (II) Module modesetting: vendor="X.Org Foundation"
[    24.638]     compiled for 1.14.3, module version = 0.8.0
[    24.638]     Module class: X.Org Video Driver
[    24.638]     ABI class: X.Org Video Driver, version 14.1
[    24.638] (II) LoadModule: "fbdev"
[    24.639] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    24.653] (II) Module fbdev: vendor="X.Org Foundation"
[    24.653]     compiled for 1.14.3, module version = 0.4.4
[    24.653]     Module class: X.Org Video Driver
[    24.653]     ABI class: X.Org Video Driver, version 14.1
[    24.653] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
    i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
    915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
    Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
    GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,
    HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,
    HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,
    HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100,
    HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200
[    24.654] (II) VESA: driver for VESA chipsets: vesa
[    24.654] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    24.654] (II) FBDEV: driver for framebuffer: fbdev
[    24.654] (++) using VT number 7

[    24.697] (WW) Falling back to old probe method for vesa
[    24.697] (WW) Falling back to old probe method for modesetting
[    24.697] (WW) Falling back to old probe method for fbdev
[    24.697] (II) Loading sub module "fbdevhw"
[    24.697] (II) LoadModule: "fbdevhw"
[    24.697] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    24.706] (II) Module fbdevhw: vendor="X.Org Foundation"
[    24.706]     compiled for 1.14.3, module version = 0.0.2
[    24.706]     ABI class: X.Org Video Driver, version 14.1
[    24.707] (II) intel(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
[    24.707] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    24.707] (==) intel(0): RGB weight 888
[    24.707] (==) intel(0): Default visual is TrueColor
[    24.707] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4000
[    24.707] (**) intel(0): Relaxed fencing enabled
[    24.707] (**) intel(0): Wait on SwapBuffers? enabled
[    24.707] (**) intel(0): Triple buffering? enabled
[    24.707] (**) intel(0): Framebuffer tiled
[    24.707] (**) intel(0): Pixmaps tiled
[    24.707] (**) intel(0): 3D buffers tiled
[    24.707] (**) intel(0): SwapBuffers wait enabled
[    24.707] (==) intel(0): video overlay key set to 0x101fe
[    24.707] (II) intel(0): Output LVDS1 has no monitor section
[    24.707] (--) intel(0): found backlight control interface /sys/class/backlight/acpi_video1
[    24.708] (II) intel(0): Output VGA1 has no monitor section
[    24.708] (II) intel(0): Output HDMI1 has no monitor section
[    24.709] (II) intel(0): Output DP1 has no monitor section
[    24.709] (II) intel(0): EDID for output LVDS1
[    24.709] (II) intel(0): Manufacturer: CMN  Model: 15b5  Serial#: 0
[    24.709] (II) intel(0): Year: 2012  Week: 2
[    24.709] (II) intel(0): EDID Version: 1.3
[    24.709] (II) intel(0): Digital Display Input
[    24.709] (II) intel(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[    24.709] (II) intel(0): Gamma: 2.20
[    24.709] (II) intel(0): No DPMS capabilities specified
[    24.709] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    24.709] (II) intel(0): First detailed timing is preferred mode
[    24.709] (II) intel(0): redX: 0.577 redY: 0.364   greenX: 0.348 greenY: 0.563
[    24.709] (II) intel(0): blueX: 0.151 blueY: 0.116   whiteX: 0.313 whiteY: 0.329
[    24.709] (II) intel(0): Manufacturer's mask: 0
[    24.709] (II) intel(0): Supported detailed timing:
[    24.709] (II) intel(0): clock: 76.4 MHz   Image Size:  344 x 194 mm
[    24.709] (II) intel(0): h_active: 1366  h_sync: 1434  h_sync_end 1480 h_blank_end 1592 h_border: 0
[    24.709] (II) intel(0): v_active: 768  v_sync: 772  v_sync_end 778 v_blanking: 799 v_border: 0
[    24.709] (II) intel(0):  CMN
[    24.709] (II) intel(0):  N156BGE-LA1
[    24.709] (II) intel(0): EDID (in hex):
[    24.709] (II) intel(0):     00ffffffffffff000daeb51500000000
[    24.709] (II) intel(0):     02160103802213780ad1f5935d599026
[    24.709] (II) intel(0):     1d505400000001010101010101010101
[    24.709] (II) intel(0):     010101010101d81d56e250001f30442e
[    24.709] (II) intel(0):     460058c210000018a60000fe004e3135
[    24.709] (II) intel(0):     364247452d4c41310a20000000fe0043
[    24.709] (II) intel(0):     4d4e0a202020202020202020000000fe
[    24.709] (II) intel(0):     004e3135364247452d4c41310a200090
[    24.709] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[    24.709] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    24.709] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    24.709] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[    24.709] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[    24.709] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[    24.709] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[    24.709] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[    24.709] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[    24.709] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[    24.709] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[    24.709] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[    24.709] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[    24.709] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[    24.709] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[    24.709] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[    24.709] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[    24.709] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[    24.709] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[    24.709] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[    24.709] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[    24.709] (II) intel(0): Printing probed modes for output LVDS1
[    24.709] (II) intel(0): Modeline "1366x768"x60.1   76.40  1366 1434 1480 1592  768 772 778 799 -hsync -vsync (48.0 kHz eP)
[    24.709] (II) intel(0): Modeline "1360x768"x59.8   84.75  1360 1432 1568 1776  768 771 781 798 -hsync +vsync (47.7 kHz d)
[    24.709] (II) intel(0): Modeline "1360x768"x60.0   72.00  1360 1408 1440 1520  768 771 781 790 +hsync -vsync (47.4 kHz d)
[    24.709] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[    24.709] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[    24.709] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[    24.709] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[    24.710] (II) intel(0): EDID for output VGA1
[    24.711] (II) intel(0): EDID for output HDMI1
[    24.711] (II) intel(0): EDID for output DP1
[    24.711] (II) intel(0): Output LVDS1 connected
[    24.711] (II) intel(0): Output VGA1 disconnected
[    24.711] (II) intel(0): Output HDMI1 disconnected
[    24.711] (II) intel(0): Output DP1 disconnected
[    24.711] (II) intel(0): Using exact sizes for initial modes
[    24.711] (II) intel(0): Output LVDS1 using initial mode 1366x768
[    24.711] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    24.711] (II) intel(0): Kernel page flipping support detected, enabling
[    24.711] (==) intel(0): DPI set to (96, 96)
[    24.711] (II) Loading sub module "fb"
[    24.711] (II) LoadModule: "fb"
[    24.711] (II) Loading /usr/lib/xorg/modules/libfb.so
[    24.726] (II) Module fb: vendor="X.Org Foundation"
[    24.726]     compiled for 1.14.3, module version = 1.0.0
[    24.726]     ABI class: X.Org ANSI C Emulation, version 0.4
[    24.726] (II) Loading sub module "dri2"
[    24.726] (II) LoadModule: "dri2"
[    24.726] (II) Module "dri2" already built-in
[    24.726] (II) UnloadModule: "vesa"
[    24.726] (II) Unloading vesa
[    24.726] (II) UnloadModule: "modesetting"
[    24.726] (II) Unloading modesetting
[    24.726] (II) UnloadModule: "fbdev"
[    24.726] (II) Unloading fbdev
[    24.726] (II) UnloadSubModule: "fbdevhw"
[    24.727] (II) Unloading fbdevhw
[    24.727] (==) Depth 24 pixmap format is 32 bpp
[    24.730] (II) intel(0): [DRI2] Setup complete
[    24.730] (II) intel(0): [DRI2]   DRI driver: i965
[    24.730] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
[    24.739] (II) UXA(0): Driver registered support for the following operations:
[    24.739] (II)         solid
[    24.739] (II)         copy
[    24.739] (II)         composite (RENDER acceleration)
[    24.739] (II)         put_image
[    24.739] (II)         get_image
[    24.739] (==) intel(0): Backing store disabled
[    24.739] (==) intel(0): Silken mouse enabled
[    24.739] (II) intel(0): Initializing HW Cursor
[    24.739] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    24.740] (==) intel(0): DPMS enabled
[    24.741] (==) intel(0): Intel XvMC decoder enabled
[    24.741] (II) intel(0): Set up textured video
[    24.741] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[    24.741] (II) intel(0): direct rendering: DRI2 Enabled
[    24.741] (==) intel(0): hotplug detection: "enabled"
[    24.760] (--) RandR disabled
[    24.887] (II) SELinux: Disabled on system
[    25.331] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    25.331] (II) AIGLX: enabled GLX_INTEL_swap_event
[    25.331] (II) AIGLX: enabled GLX_ARB_create_context
[    25.331] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    25.331] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[    25.331] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    25.331] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    25.331] (II) AIGLX: Loaded and initialized i965
[    25.331] (II) GLX: Initialized DRI2 GL provider for screen 0
[    25.331] (II) intel(0): Setting screen physical size to 361 x 203
[    26.641] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    26.641] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    26.641] (II) LoadModule: "evdev"
[    26.659] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    26.701] (II) Module evdev: vendor="X.Org Foundation"
[    26.701]     compiled for 1.14.3, module version = 2.8.2
[    26.701]     Module class: X.Org XInput Driver
[    26.701]     ABI class: X.Org XInput driver, version 19.1
[    26.701] (II) Using input driver 'evdev' for 'Power Button'
[    26.701] (**) Power Button: always reports core events
[    26.701] (**) evdev: Power Button: Device: "/dev/input/event3"
[    26.701] (--) evdev: Power Button: Vendor 0 Product 0x1
[    26.701] (--) evdev: Power Button: Found keys
[    26.701] (II) evdev: Power Button: Configuring as keyboard
[    26.701] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[    26.701] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    26.701] (**) Option "xkb_rules" "evdev"
[    26.701] (**) Option "xkb_model" "pc105"
[    26.701] (**) Option "xkb_layout" "pl"
[    27.012] (II) config/udev: Adding input device Video Bus (/dev/input/event13)
[    27.012] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    27.012] (II) Using input driver 'evdev' for 'Video Bus'
[    27.012] (**) Video Bus: always reports core events
[    27.012] (**) evdev: Video Bus: Device: "/dev/input/event13"
[    27.012] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    27.012] (--) evdev: Video Bus: Found keys
[    27.012] (II) evdev: Video Bus: Configuring as keyboard
[    27.012] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input13/event13"
[    27.012] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    27.012] (**) Option "xkb_rules" "evdev"
[    27.012] (**) Option "xkb_model" "pc105"
[    27.012] (**) Option "xkb_layout" "pl"
[    27.013] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    27.013] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    27.013] (II) Using input driver 'evdev' for 'Power Button'
[    27.013] (**) Power Button: always reports core events
[    27.013] (**) evdev: Power Button: Device: "/dev/input/event1"
[    27.013] (--) evdev: Power Button: Vendor 0 Product 0x1
[    27.013] (--) evdev: Power Button: Found keys
[    27.013] (II) evdev: Power Button: Configuring as keyboard
[    27.013] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0C:00/input/input1/event1"
[    27.013] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[    27.013] (**) Option "xkb_rules" "evdev"
[    27.013] (**) Option "xkb_model" "pc105"
[    27.013] (**) Option "xkb_layout" "pl"
[    27.014] (II) config/udev: Adding input device Video Bus (/dev/input/event11)
[    27.014] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    27.014] (II) Using input driver 'evdev' for 'Video Bus'
[    27.014] (**) Video Bus: always reports core events
[    27.014] (**) evdev: Video Bus: Device: "/dev/input/event11"
[    27.014] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    27.014] (--) evdev: Video Bus: Found keys
[    27.014] (II) evdev: Video Bus: Configuring as keyboard
[    27.014] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:36/LNXVIDEO:00/input/input11/event11"
[    27.014] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 9)
[    27.014] (**) Option "xkb_rules" "evdev"
[    27.014] (**) Option "xkb_model" "pc105"
[    27.014] (**) Option "xkb_layout" "pl"
[    27.014] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[    27.014] (II) No input driver specified, ignoring this device.
[    27.014] (II) This device may have been added with another device file.
[    27.014] (II) config/udev: Adding drm device (/dev/dri/card0)
[    27.015] (II) config/udev: Adding input device Lenovo EasyCamera (/dev/input/event12)
[    27.015] (**) Lenovo EasyCamera: Applying InputClass "evdev keyboard catchall"
[    27.015] (II) Using input driver 'evdev' for 'Lenovo EasyCamera'
[    27.015] (**) Lenovo EasyCamera: always reports core events
[    27.015] (**) evdev: Lenovo EasyCamera: Device: "/dev/input/event12"
[    27.015] (--) evdev: Lenovo EasyCamera: Vendor 0x4f2 Product 0xb35d
[    27.015] (--) evdev: Lenovo EasyCamera: Found keys
[    27.015] (II) evdev: Lenovo EasyCamera: Configuring as keyboard
[    27.015] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/input/input12/event12"
[    27.015] (II) XINPUT: Adding extended input device "Lenovo EasyCamera" (type: KEYBOARD, id 10)
[    27.015] (**) Option "xkb_rules" "evdev"
[    27.015] (**) Option "xkb_model" "pc105"
[    27.015] (**) Option "xkb_layout" "pl"
[    27.015] (II) config/udev: Adding input device RAPOO RAPOO 5G Wireless Device (/dev/input/event14)
[    27.015] (**) RAPOO RAPOO 5G Wireless Device: Applying InputClass "evdev keyboard catchall"
[    27.016] (II) Using input driver 'evdev' for 'RAPOO RAPOO 5G Wireless Device'
[    27.016] (**) RAPOO RAPOO 5G Wireless Device: always reports core events
[    27.016] (**) evdev: RAPOO RAPOO 5G Wireless Device: Device: "/dev/input/event14"
[    27.016] (--) evdev: RAPOO RAPOO 5G Wireless Device: Vendor 0x24ae Product 0x2001
[    27.016] (--) evdev: RAPOO RAPOO 5G Wireless Device: Found keys
[    27.016] (II) evdev: RAPOO RAPOO 5G Wireless Device: Configuring as keyboard
[    27.016] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input14/event14"
[    27.016] (II) XINPUT: Adding extended input device "RAPOO RAPOO 5G Wireless Device" (type: KEYBOARD, id 11)
[    27.016] (**) Option "xkb_rules" "evdev"
[    27.016] (**) Option "xkb_model" "pc105"
[    27.016] (**) Option "xkb_layout" "pl"
[    27.016] (II) config/udev: Adding input device RAPOO RAPOO 5G Wireless Device (/dev/input/event15)
[    27.016] (**) RAPOO RAPOO 5G Wireless Device: Applying InputClass "evdev pointer catchall"
[    27.016] (**) RAPOO RAPOO 5G Wireless Device: Applying InputClass "evdev keyboard catchall"
[    27.016] (II) Using input driver 'evdev' for 'RAPOO RAPOO 5G Wireless Device'
[    27.016] (**) RAPOO RAPOO 5G Wireless Device: always reports core events
[    27.016] (**) evdev: RAPOO RAPOO 5G Wireless Device: Device: "/dev/input/event15"
[    27.016] (--) evdev: RAPOO RAPOO 5G Wireless Device: Vendor 0x24ae Product 0x2001
[    27.016] (--) evdev: RAPOO RAPOO 5G Wireless Device: Found 9 mouse buttons
[    27.016] (--) evdev: RAPOO RAPOO 5G Wireless Device: Found scroll wheel(s)
[    27.016] (--) evdev: RAPOO RAPOO 5G Wireless Device: Found relative axes
[    27.016] (--) evdev: RAPOO RAPOO 5G Wireless Device: Found x and y relative axes
[    27.016] (--) evdev: RAPOO RAPOO 5G Wireless Device: Found absolute axes
[    27.016] (II) evdev: RAPOO RAPOO 5G Wireless Device: Forcing absolute x/y axes to exist.
[    27.017] (--) evdev: RAPOO RAPOO 5G Wireless Device: Found keys
[    27.017] (II) evdev: RAPOO RAPOO 5G Wireless Device: Configuring as mouse
[    27.017] (II) evdev: RAPOO RAPOO 5G Wireless Device: Configuring as keyboard
[    27.017] (II) evdev: RAPOO RAPOO 5G Wireless Device: Adding scrollwheel support
[    27.017] (**) evdev: RAPOO RAPOO 5G Wireless Device: YAxisMapping: buttons 4 and 5
[    27.017] (**) evdev: RAPOO RAPOO 5G Wireless Device: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    27.017] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/input/input15/event15"
[    27.017] (II) XINPUT: Adding extended input device "RAPOO RAPOO 5G Wireless Device" (type: KEYBOARD, id 12)
[    27.017] (**) Option "xkb_rules" "evdev"
[    27.017] (**) Option "xkb_model" "pc105"
[    27.017] (**) Option "xkb_layout" "pl"
[    27.017] (II) evdev: RAPOO RAPOO 5G Wireless Device: initialized for relative axes.
[    27.017] (WW) evdev: RAPOO RAPOO 5G Wireless Device: ignoring absolute axes.
[    27.017] (**) RAPOO RAPOO 5G Wireless Device: (accel) keeping acceleration scheme 1
[    27.017] (**) RAPOO RAPOO 5G Wireless Device: (accel) acceleration profile 0
[    27.017] (**) RAPOO RAPOO 5G Wireless Device: (accel) acceleration factor: 2.000
[    27.017] (**) RAPOO RAPOO 5G Wireless Device: (accel) acceleration threshold: 4
[    27.017] (II) config/udev: Adding input device RAPOO RAPOO 5G Wireless Device (/dev/input/mouse1)
[    27.018] (II) No input driver specified, ignoring this device.
[    27.018] (II) This device may have been added with another device file.
[    27.018] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event6)
[    27.018] (II) No input driver specified, ignoring this device.
[    27.018] (II) This device may have been added with another device file.
[    27.018] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event7)
[    27.018] (II) No input driver specified, ignoring this device.
[    27.018] (II) This device may have been added with another device file.
[    27.018] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event8)
[    27.018] (II) No input driver specified, ignoring this device.
[    27.018] (II) This device may have been added with another device file.
[    27.018] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event9)
[    27.018] (II) No input driver specified, ignoring this device.
[    27.018] (II) This device may have been added with another device file.
[    27.019] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    27.019] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    27.019] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    27.019] (**) AT Translated Set 2 keyboard: always reports core events
[    27.019] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[    27.019] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    27.019] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    27.019] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    27.019] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    27.019] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[    27.019] (**) Option "xkb_rules" "evdev"
[    27.019] (**) Option "xkb_model" "pc105"
[    27.019] (**) Option "xkb_layout" "pl"
[    27.019] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event10)
[    27.019] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[    27.019] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[    27.019] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[    27.019] (II) LoadModule: "synaptics"
[    27.020] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    27.127] (II) Module synaptics: vendor="X.Org Foundation"
[    27.127]     compiled for 1.14.3, module version = 1.7.1
[    27.127]     Module class: X.Org XInput Driver
[    27.127]     ABI class: X.Org XInput driver, version 19.1
[    27.127] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[    27.127] (**) ETPS/2 Elantech Touchpad: always reports core events
[    27.127] (**) Option "Device" "/dev/input/event10"
[    27.220] (II) synaptics: ETPS/2 Elantech Touchpad: found clickpad property
[    27.220] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 3260 (res 33)
[    27.220] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 2119 (res 33)
[    27.220] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[    27.220] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
[    27.220] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left double triple
[    27.220] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[    27.220] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[    27.220] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[    27.220] (**) ETPS/2 Elantech Touchpad: always reports core events
[    27.300] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input10/event10"
[    27.300] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 14)
[    27.300] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[    27.300] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
[    27.300] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.051
[    27.300] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[    27.300] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[    27.300] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[    27.300] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[    27.300] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[    27.301] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0)
[    27.301] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[    27.301] (II) config/udev: Adding input device Ideapad extra buttons (/dev/input/event5)
[    27.301] (**) Ideapad extra buttons: Applying InputClass "evdev keyboard catchall"
[    27.301] (II) Using input driver 'evdev' for 'Ideapad extra buttons'
[    27.301] (**) Ideapad extra buttons: always reports core events
[    27.301] (**) evdev: Ideapad extra buttons: Device: "/dev/input/event5"
[    27.301] (--) evdev: Ideapad extra buttons: Vendor 0 Product 0
[    27.301] (--) evdev: Ideapad extra buttons: Found keys
[    27.301] (II) evdev: Ideapad extra buttons: Configuring as keyboard
[    27.301] (**) Option "config_info" "udev:/sys/devices/platform/ideapad/input/input5/event5"
[    27.301] (II) XINPUT: Adding extended input device "Ideapad extra buttons" (type: KEYBOARD, id 15)
[    27.301] (**) Option "xkb_rules" "evdev"
[    27.301] (**) Option "xkb_model" "pc105"
[    27.301] (**) Option "xkb_layout" "pl"
[    27.301] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[    27.301] (II) No input driver specified, ignoring this device.
[    27.301] (II) This device may have been added with another device file.
[    35.102] (II) intel(0): EDID vendor "CMN", prod id 5557
[    35.102] (II) intel(0): DDCModeFromDetailedTiming: Ignoring tiny 0x846 mode
[    35.102] (II) intel(0): Printing DDC gathered Modelines:
[    35.102] (II) intel(0): Modeline "1366x768"x0.0   76.40  1366 1434 1480 1592  768 772 778 799 -hsync -vsync (48.0 kHz eP)
[    41.659] (II) intel(0): EDID vendor "CMN", prod id 5557
[    41.659] (II) intel(0): DDCModeFromDetailedTiming: Ignoring tiny 0x846 mode
[    41.659] (II) intel(0): Printing DDC gathered Modelines:
[    41.659] (II) intel(0): Modeline "1366x768"x0.0   76.40  1366 1434 1480 1592  768 772 778 799 -hsync -vsync (48.0 kHz eP)
[    42.184] (II) intel(0): EDID vendor "CMN", prod id 5557
[    42.184] (II) intel(0): DDCModeFromDetailedTiming: Ignoring tiny 0x846 mode
[    42.184] (II) intel(0): Printing DDC gathered Modelines:
[    42.184] (II) intel(0): Modeline "1366x768"x0.0   76.40  1366 1434 1480 1592  768 772 778 799 -hsync -vsync (48.0 kHz eP)
[   104.125] (II) intel(0): EDID vendor "CMN", prod id 5557
[   104.125] (II) intel(0): DDCModeFromDetailedTiming: Ignoring tiny 0x846 mode
[   104.125] (II) intel(0): Printing DDC gathered Modelines:
[   104.125] (II) intel(0): Modeline "1366x768"x0.0   76.40  1366 1434 1480 1592  768 772 778 799 -hsync -vsync (48.0 kHz eP)
[   106.231] (II) intel(0): EDID vendor "CMN", prod id 5557
[   106.231] (II) intel(0): DDCModeFromDetailedTiming: Ignoring tiny 0x846 mode
[   106.231] (II) intel(0): Printing DDC gathered Modelines:
[   106.231] (II) intel(0): Modeline "1366x768"x0.0   76.40  1366 1434 1480 1592  768 772 778 799 -hsync -vsync (48.0 kHz eP)
[   106.286] (II) intel(0): EDID vendor "CMN", prod id 5557
[   106.286] (II) intel(0): DDCModeFromDetailedTiming: Ignoring tiny 0x846 mode
[   106.286] (II) intel(0): Printing DDC gathered Modelines:
[   106.286] (II) intel(0): Modeline "1366x768"x0.0   76.40  1366 1434 1480 1592  768 772 778 799 -hsync -vsync (48.0 kHz eP)
[   150.225] (II) intel(0): EDID vendor "CMN", prod id 5557
[   150.225] (II) intel(0): DDCModeFromDetailedTiming: Ignoring tiny 0x846 mode
[   150.225] (II) intel(0): Printing DDC gathered Modelines:
[   150.225] (II) intel(0): Modeline "1366x768"x0.0   76.40  1366 1434 1480 1592  768 772 778 799 -hsync -vsync (48.0 kHz eP)
[   150.372] (II) intel(0): EDID vendor "CMN", prod id 5557
[   150.372] (II) intel(0): DDCModeFromDetailedTiming: Ignoring tiny 0x846 mode
[   150.372] (II) intel(0): Printing DDC gathered Modelines:
[   150.372] (II) intel(0): Modeline "1366x768"x0.0   76.40  1366 1434 1480 1592  768 772 778 799 -hsync -vsync (48.0 kHz eP)
[   150.477] (II) intel(0): Allocated new frame buffer 3328x1080 stride 13312, tiled
[   150.660] (II) intel(0): EDID vendor "CMN", prod id 5557
[   150.660] (II) intel(0): DDCModeFromDetailedTiming: Ignoring tiny 0x846 mode
[   150.660] (II) intel(0): Printing DDC gathered Modelines:
[   150.660] (II) intel(0): Modeline "1366x768"x0.0   76.40  1366 1434 1480 1592  768 772 778 799 -hsync -vsync (48.0 kHz eP)
[   186.752] (II) intel(0): EDID vendor "CMN", prod id 5557
[   186.752] (II) intel(0): DDCModeFromDetailedTiming: Ignoring tiny 0x846 mode
[   186.752] (II) intel(0): Printing DDC gathered Modelines:
[   186.752] (II) intel(0): Modeline "1366x768"x0.0   76.40  1366 1434 1480 1592  768 772 778 799 -hsync -vsync (48.0 kHz eP)
[   195.430] (II) intel(0): EDID vendor "CMN", prod id 5557
[   195.430] (II) intel(0): DDCModeFromDetailedTiming: Ignoring tiny 0x846 mode
[   195.430] (II) intel(0): Printing DDC gathered Modelines:
[   195.430] (II) intel(0): Modeline "1366x768"x0.0   76.40  1366 1434 1480 1592  768 772 778 799 -hsync -vsync (48.0 kHz eP)

Kod:

miziak@debian:~$ cat /var/log/Xorg.8.log
[  1304.521] 
X.Org X Server 1.14.3
Release Date: 2013-09-12
[  1304.521] X Protocol Version 11, Revision 0
[  1304.521] Build Operating System: Linux 3.10-2-amd64 x86_64 Debian
[  1304.521] Current Operating System: Linux debian 3.11-2-amd64 #1 SMP Debian 3.11.8-1 (2013-11-13) x86_64
[  1304.521] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.11-2-amd64 root=UUID=8c7f039c-af9a-4bfd-a23d-1c8a58231204 ro quiet
[  1304.521] Build Date: 05 October 2013  02:04:26PM
[  1304.521] xorg-server 2:1.14.3-4 (Julien Cristau <jcristau@debian.org>) 
[  1304.521] Current version of pixman: 0.30.2
[  1304.521]     Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[  1304.521] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[  1304.521] (==) Log file: "/var/log/Xorg.8.log", Time: Tue Nov 26 21:44:49 2013
[  1304.534] (++) Using config file: "/etc/bumblebee/xorg.conf.nvidia"
[  1304.534] (++) Using config directory: "/etc/bumblebee/xorg.conf.d"
[  1304.534] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[  1304.544] (==) ServerLayout "Layout0"
[  1304.544] (==) No screen section available. Using defaults.
[  1304.544] (**) |-->Screen "Default Screen Section" (0)
[  1304.544] (**) |   |-->Monitor "<default monitor>"
[  1304.545] (==) No device specified for screen "Default Screen Section".
    Using the first device section listed.
[  1304.545] (**) |   |-->Device "DiscreteNvidia"
[  1304.545] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
[  1304.545] (**) Option "AutoAddDevices" "false"
[  1304.545] (**) Option "AutoAddGPU" "false"
[  1304.545] (**) Not automatically adding devices
[  1304.545] (==) Automatically enabling devices
[  1304.545] (**) Not automatically adding GPU devices
[  1304.545] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[  1304.545]     Entry deleted from font path.
[  1304.545] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[  1304.545]     Entry deleted from font path.
[  1304.545] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[  1304.545]     Entry deleted from font path.
[  1304.545] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[  1304.545]     Entry deleted from font path.
[  1304.545] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[  1304.545]     Entry deleted from font path.
[  1304.545] (==) FontPath set to:
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/Type1,
    built-ins
[  1304.545] (++) ModulePath set to "/usr/lib/nvidia,/usr/lib/xorg/modules"
[  1304.545] (==) |-->Input Device "<default pointer>"
[  1304.545] (==) |-->Input Device "<default keyboard>"
[  1304.545] (==) The core pointer device wasn't specified explicitly in the layout.
    Using the default mouse configuration.
[  1304.545] (==) The core keyboard device wasn't specified explicitly in the layout.
    Using the default keyboard configuration.
[  1304.545] (II) Loader magic: 0x7fb568b87d00
[  1304.545] (II) Module ABI versions:
[  1304.545]     X.Org ANSI C Emulation: 0.4
[  1304.545]     X.Org Video Driver: 14.1
[  1304.545]     X.Org XInput driver : 19.1
[  1304.545]     X.Org Server Extension : 7.0
[  1304.545] (II) xfree86: Adding drm device (/dev/dri/card0)
[  1304.545] setversion 1.4 failed
[  1304.546] (--) PCI:*(0:1:0:0) 10de:0fd9:17aa:3904 rev 161, Mem @ 0xd2000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00003000/128
[  1304.546] (II) Open ACPI successful (/var/run/acpid.socket)
[  1304.546] Initializing built-in extension Generic Event Extension
[  1304.546] Initializing built-in extension SHAPE
[  1304.546] Initializing built-in extension MIT-SHM
[  1304.546] Initializing built-in extension XInputExtension
[  1304.546] Initializing built-in extension XTEST
[  1304.546] Initializing built-in extension BIG-REQUESTS
[  1304.546] Initializing built-in extension SYNC
[  1304.546] Initializing built-in extension XKEYBOARD
[  1304.546] Initializing built-in extension XC-MISC
[  1304.546] Initializing built-in extension SECURITY
[  1304.546] Initializing built-in extension XINERAMA
[  1304.546] Initializing built-in extension XFIXES
[  1304.546] Initializing built-in extension RENDER
[  1304.546] Initializing built-in extension RANDR
[  1304.546] Initializing built-in extension COMPOSITE
[  1304.546] Initializing built-in extension DAMAGE
[  1304.546] Initializing built-in extension MIT-SCREEN-SAVER
[  1304.546] Initializing built-in extension DOUBLE-BUFFER
[  1304.546] Initializing built-in extension RECORD
[  1304.546] Initializing built-in extension DPMS
[  1304.546] Initializing built-in extension X-Resource
[  1304.546] Initializing built-in extension XVideo
[  1304.546] Initializing built-in extension XVideo-MotionCompensation
[  1304.546] Initializing built-in extension SELinux
[  1304.546] Initializing built-in extension XFree86-VidModeExtension
[  1304.546] Initializing built-in extension XFree86-DGA
[  1304.546] Initializing built-in extension XFree86-DRI
[  1304.546] Initializing built-in extension DRI2
[  1304.546] (II) LoadModule: "glx"
[  1304.553] (II) Loading /usr/lib/nvidia/legacy-304xx/libglx.so
[  1305.959] (II) Module glx: vendor="NVIDIA Corporation"
[  1305.959]     compiled for 4.0.2, module version = 1.0.0
[  1305.959]     Module class: X.Org Server Extension
[  1305.959] (II) NVIDIA GLX Module  304.116  Mon Oct 28 20:59:08 PDT 2013
[  1305.959] Loading extension GLX
[  1305.959] (II) LoadModule: "nvidia"
[  1305.959] (II) Loading /usr/lib/nvidia/legacy-304xx/nvidia_drv.so
[  1306.062] (II) Module nvidia: vendor="NVIDIA Corporation"
[  1306.062]     compiled for 4.0.2, module version = 1.0.0
[  1306.062]     Module class: X.Org Video Driver
[  1306.130] (II) LoadModule: "mouse"
[  1306.131] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
[  1306.138] (II) Module mouse: vendor="X.Org Foundation"
[  1306.138]     compiled for 1.14.3, module version = 1.9.0
[  1306.138]     Module class: X.Org XInput Driver
[  1306.138]     ABI class: X.Org XInput driver, version 19.1
[  1306.138] (II) LoadModule: "kbd"
[  1306.139] (WW) Warning, couldn't open module kbd
[  1306.139] (II) UnloadModule: "kbd"
[  1306.139] (II) Unloading kbd
[  1306.139] (EE) Failed to load module "kbd" (module does not exist, 0)
[  1306.139] (II) NVIDIA dlloader X Driver  304.116  Mon Oct 28 20:40:38 PDT 2013
[  1306.139] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[  1306.154] (--) using VT number 7

[  1306.155] (II) Loading sub module "fb"
[  1306.155] (II) LoadModule: "fb"
[  1306.156] (II) Loading /usr/lib/xorg/modules/libfb.so
[  1306.156] (II) Module fb: vendor="X.Org Foundation"
[  1306.156]     compiled for 1.14.3, module version = 1.0.0
[  1306.156]     ABI class: X.Org ANSI C Emulation, version 0.4
[  1306.156] (II) Loading sub module "wfb"
[  1306.156] (II) LoadModule: "wfb"
[  1306.156] (II) Loading /usr/lib/xorg/modules/libwfb.so
[  1306.166] (II) Module wfb: vendor="X.Org Foundation"
[  1306.166]     compiled for 1.14.3, module version = 1.0.0
[  1306.166]     ABI class: X.Org ANSI C Emulation, version 0.4
[  1306.166] (II) Loading sub module "ramdac"
[  1306.166] (II) LoadModule: "ramdac"
[  1306.166] (II) Module "ramdac" already built-in
[  1306.182] (II) NVIDIA(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
[  1306.182] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[  1306.182] (==) NVIDIA(0): RGB weight 888
[  1306.182] (==) NVIDIA(0): Default visual is TrueColor
[  1306.182] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[  1306.182] (**) NVIDIA(0): Option "NoLogo" "true"
[  1306.182] (**) NVIDIA(0): Option "ProbeAllGpus" "false"
[  1306.182] (**) NVIDIA(0): Option "UseEDID" "false"
[  1306.182] (**) NVIDIA(0): Option "UseDisplayDevice" "none"
[  1306.183] (**) NVIDIA(0): Enabling 2D acceleration
[  1306.183] (**) NVIDIA(0): Ignoring EDIDs
[  1306.183] (**) NVIDIA(0): Option "UseDisplayDevice" set to "none"; enabling NoScanout
[  1306.183] (**) NVIDIA(0):     mode
[  1306.198] (EE) NVIDIA(0): Failed to initialize the NVIDIA kernel module. Please see the
[  1306.198] (EE) NVIDIA(0):     system's kernel log for additional error messages and
[  1306.198] (EE) NVIDIA(0):     consult the NVIDIA README for details.
[  1306.198] (EE) NVIDIA(0):  *** Aborting ***
[  1306.198] (EE) NVIDIA(0): Failing initialization of X screen 0
[  1306.198] (II) UnloadModule: "nvidia"
[  1306.198] (II) UnloadSubModule: "wfb"
[  1306.198] (II) UnloadSubModule: "fb"
[  1306.198] (EE) Screen(s) found, but none have a usable configuration.
[  1306.198] (EE) 
Fatal server error:
[  1306.198] (EE) no screens found(EE) 
[  1306.198] (EE) 
Please consult the The X.Org Foundation support 
     at http://wiki.x.org
 for help. 
[  1306.198] (EE) Please also check the log file at "/var/log/Xorg.8.log" for additional information.
[  1306.198] (EE) 
[  1306.198] (EE) Server terminated with error (1). Closing log file.

Dodam że Komputer to laptop Lenovo IdeaPad Z500 z Debianem jessie na pokładzie.
Z góry dzięki za wszelką pomoc, pozdrawiam :)


http://img827.imageshack.us/img827/778/linuxfr8.gif

Offline

 

#2  2013-11-26 22:19:59

  morfik - Cenzor wirtualnego świata

morfik
Cenzor wirtualnego świata
Skąd: ze WSI
Zarejestrowany: 2011-09-15
Serwis

Re: Nvidia Optimus problem po aktualizacji.

Na pewno masz odpowiednie pakiety od nvidii zainstalowane? Weź sobie doinstaluj pakiet

Kod:

nvidia-detect

I zobacz co pokaże, Np w moim przypadku:

Kod:

# nvidia-detect
Detected NVIDIA GPUs:
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation G73 [GeForce 7600 GT] [10de:0391] (rev a1)
Your card is only supported up to the 304 legacy drivers series.
It is recommended to install the
    nvidia-legacy-304xx-driver
package.

Offline

 

#3  2013-11-26 22:20:14

  fervi - Użytkownik

fervi
Użytkownik
Zarejestrowany: 2010-03-14

Re: Nvidia Optimus problem po aktualizacji.

W bumblebee.conf zmień 55 linijkę
Teraz wygląda tak:

Kod:

KernelDriver=nvidia

A ma wyglądać:

Kod:

KernelDriver=nvidia-current

Zazwyczaj pomaga :D

Fervi

Offline

 

#4  2013-11-26 23:04:49

  Miziak - Użytkownik

Miziak
Użytkownik
Skąd: ok. Płocka
Zarejestrowany: 2010-11-03

Re: Nvidia Optimus problem po aktualizacji.

Więc tak wywaliłem wszystko co w nazwie ma nvidia i zainstalowałem ster polecany przez nvidia-detect.
@fervi
tak mam w configu ale odkryłem nowy problem:

Kod:

miziak@debian:~$ cat /proc/acpi/bbswitch
0000:01:00.0 OFF

i za żadne skarby po poleceniu:

Kod:

miziak@debian:~$ sudo tee /proc/acpi/bbswitch <<<ON

nie wstaje przy próbie uruchomienia czegoś dostaję:

Kod:

miziak@debian:~$ optirun glxgears
[ 1526.660346] [ERROR]Cannot access secondary GPU - error: Could not enable discrete graphics card

[ 1526.660456] [ERROR]Aborting because fallback start is disabled.

http://img827.imageshack.us/img827/778/linuxfr8.gif

Offline

 

#5  2013-11-26 23:25:09

  uzytkownikubunt - Zbanowany

uzytkownikubunt
Zbanowany
Zarejestrowany: 2012-04-25

Re: Nvidia Optimus problem po aktualizacji.

278

Ostatnio edytowany przez uzytkownikubunt (2016-12-01 00:41:18)

Offline

 

#6  2013-11-26 23:25:58

  fervi - Użytkownik

fervi
Użytkownik
Zarejestrowany: 2010-03-14

Re: Nvidia Optimus problem po aktualizacji.

Jeśli miałeś nvidia-current to na nvidię trzeba było zmienić :P

Kod:

dpkg --list | grep nvidia
lspci | grep VGA

Fervi

Ostatnio edytowany przez fervi (2013-11-26 23:26:46)

Offline

 

#7  2013-11-26 23:36:16

  Miziak - Użytkownik

Miziak
Użytkownik
Skąd: ok. Płocka
Zarejestrowany: 2010-11-03

Re: Nvidia Optimus problem po aktualizacji.

Znaczy sam zmieniałem na nvidia-current :)

Kod:

miziak@debian:~$ dpkg --list | grep nvidia
ii  bumblebee-nvidia                      3.2.1-4                         amd64        NVIDIA Optimus support using the proprietary NVIDIA driver
ii  glx-alternative-nvidia                0.4.1                           amd64        allows the selection of NVIDIA as GLX provider
ii  libgl1-nvidia-glx:amd64               319.72-1                        amd64        NVIDIA binary OpenGL libraries
ii  libgl1-nvidia-glx:i386                319.72-1                        i386         NVIDIA binary OpenGL libraries
ii  libgl1-nvidia-glx-i386                319.72-1                        i386         NVIDIA binary OpenGL 32-bit libraries
ii  libnvidia-ml1:amd64                   319.72-1                        amd64        NVIDIA Management Library (NVML) runtime library
ii  nvidia-alternative                    319.72-1                        amd64        allows the selection of NVIDIA as GLX provider
ii  nvidia-detect                         319.72-1                        amd64        NVIDIA GPU detection utility
ii  nvidia-driver                         319.72-1                        amd64        NVIDIA metapackage
ii  nvidia-installer-cleanup              20131102+1                      amd64        cleanup after driver installation with the nvidia-installer
ii  nvidia-kernel-common                  20131102+1                      amd64        NVIDIA binary kernel module support files
ii  nvidia-kernel-dkms                    319.72-1                        amd64        NVIDIA binary kernel module DKMS source
ii  nvidia-settings                       319.72-1                        amd64        tool for configuring the NVIDIA graphics driver
ii  nvidia-support                        20131102+1                      amd64        NVIDIA binary graphics driver support files
ii  nvidia-vdpau-driver:amd64             319.72-1                        amd64        NVIDIA vdpau driver
ii  xserver-xorg-video-nvidia             319.72-1                        amd64        NVIDIA binary Xorg driver

Kod:

miziak@debian:~$ lspci | grep VGA
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
01:00.0 VGA compatible controller: NVIDIA Corporation GK107M [GeForce GT 645M] (rev ff)

@uzytkownikubunt
Kernel 3.9 mam.


http://img827.imageshack.us/img827/778/linuxfr8.gif

Offline

 

#8  2013-11-26 23:39:57

  fervi - Użytkownik

fervi
Użytkownik
Zarejestrowany: 2010-03-14

Re: Nvidia Optimus problem po aktualizacji.

Kod:

optirun --debug echo "Fervi jest fajny"

Fervi

PS. Co ci się zaktualizowało?

Ostatnio edytowany przez fervi (2013-11-26 23:43:31)

Offline

 

#9  2013-11-26 23:48:50

  Miziak - Użytkownik

Miziak
Użytkownik
Skąd: ok. Płocka
Zarejestrowany: 2010-11-03

Re: Nvidia Optimus problem po aktualizacji.

Kod:

miziak@debian:~$ optirun --debug echo "Fervi jest fajny"
[  240.828694] [DEBUG]optirun version 3.2.1 starting...
[  240.828732] [DEBUG]Active configuration:
[  240.828742] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
[  240.828765] [DEBUG] X display: :8
[  240.828783] [DEBUG] LD_LIBRARY_PATH: /usr/lib/x86_64-linux-gnu/nvidia:/usr/lib/i386-linux-gnu/nvidia:/usr/lib/nvidia
[  240.828796] [DEBUG] Socket path: /var/run/bumblebee.socket
[  240.828804] [DEBUG] Accel/display bridge: auto
[  240.828814] [DEBUG] VGL Compression: proxy
[  240.828826] [DEBUG] VGLrun extra options: 
[  240.828837] [DEBUG] Primus LD Path: /usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus:/usr/lib/primus:/usr/lib32/primus
[  240.828873] [DEBUG]Using auto-detected bridge primus
[  240.829035] [INFO]Response: No - error: [XORG] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0.  Please

[  240.829054] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0.  Please

[  240.829072] [DEBUG]Socket closed.
[  240.829090] [ERROR]Aborting because fallback start is disabled.
[  240.829107] [DEBUG]Killing all remaining processes.

Generalnie to cały system bo dość długo go nie aktualizowałem.
No tak mi ta aktualizacja krwi napsuła przez tego Optimusa...

Ostatnio edytowany przez Miziak (2013-11-26 23:50:47)


http://img827.imageshack.us/img827/778/linuxfr8.gif

Offline

 

#10  2013-11-26 23:54:22

  fervi - Użytkownik

fervi
Użytkownik
Zarejestrowany: 2010-03-14

Re: Nvidia Optimus problem po aktualizacji.

Kod:

[  240.829035] [INFO]Response: No - error: [XORG] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0.  Please

To wszystko co wyświetla?
Ogólnie jeśli się nie mylę musisz zamienić z nvidia-current na nvidia :P

Jedyne co przychodzi mi do głowy ...

Kod:

LibraryPath=/usr/lib/x86_64-linux-gnu/nvidia:/usr/lib/i386-linux-gnu/nvidia:/usr/lib/nvidia

Sprawdź czy masz takie katalogi

Fervi

Offline

 

#11  2013-11-27 00:05:15

  Miziak - Użytkownik

Miziak
Użytkownik
Skąd: ok. Płocka
Zarejestrowany: 2010-11-03

Re: Nvidia Optimus problem po aktualizacji.

Tak, tylko to.
Generalnie bbswitch cały czas jest OFF i za cholerę nie chce wstawać a wczoraj jeszcze działał nie wiem chyba zabiłem sobie grafę(mam nadzieję, że tylko dla systemu).
Wszystkie katalogi istnieją i zawierają pliki.

Jeszcze przy włączaniu komputera zauważyłem, że acpi-handle-hack krzyczy o braku jakiegoś urządzenia i wygląda to dość dziwnie bo próbuje to zrobić kilka razy, za każdym razem z tym samym błędem.


http://img827.imageshack.us/img827/778/linuxfr8.gif

Offline

 

#12  2013-11-27 00:13:11

  fervi - Użytkownik

fervi
Użytkownik
Zarejestrowany: 2010-03-14

Re: Nvidia Optimus problem po aktualizacji.

Ja bym proponował przejść na 3.11 ogólnie

Kod:

sudo dkms status
ls /boot

Na dobranoc jeszcze

Fervi

Ostatnio edytowany przez fervi (2013-11-27 00:13:25)

Offline

 

#13  2013-11-27 00:18:25

  Miziak - Użytkownik

Miziak
Użytkownik
Skąd: ok. Płocka
Zarejestrowany: 2010-11-03

Re: Nvidia Optimus problem po aktualizacji.

Znaczy ja mam jądro 3.11 i na nim pracuję :)

Kod:

miziak@debian:~$ sudo dkms status
[sudo] password for miziak: 
acpi-handle-hack, 0.0.2, 3.11-2-amd64, x86_64: installed (WARNING! Diff between built and installed module!)
bbswitch, 0.7, 3.11-2-amd64, x86_64: installed
nvidia-current, 319.72, 3.11-2-amd64, x86_64: installed

Kod:

miziak@debian:~$ ls /boot
config-2.6.32-5-amd64      initrd.img-3.11-2-amd64    vmlinuz-2.6.32-5-amd64
config-3.11-2-amd64        initrd.img-3.9-1-amd64     vmlinuz-3.11-2-amd64
config-3.9-1-amd64         System.map-2.6.32-5-amd64  vmlinuz-3.9-1-amd64
grub                       System.map-3.11-2-amd64
initrd.img-2.6.32-5-amd64  System.map-3.9-1-amd64

http://img827.imageshack.us/img827/778/linuxfr8.gif

Offline

 

#14  2013-11-27 00:24:13

  fervi - Użytkownik

fervi
Użytkownik
Zarejestrowany: 2010-03-14

Re: Nvidia Optimus problem po aktualizacji.

To jeszcze na dobranoc :D

zmień tę linijkę na nvidia-current
i uruchom ponownie komputer

I daj znać :P

acpi-handle-hack; ja nie mam (wątpię by było potrzebne), ogólnie problem taki, że masz inszą wersję tego, niż w pliku Diff

Kod:

ls /var/lib/initramfs-tools | sudo xargs -n1 /usr/lib/dkms/dkms_autoinstaller start

Przebuduje ci wszelkie pakiety DKMS (w tym ten acpi-hack) [chyba jako root odpalać]

Fervi

Ostatnio edytowany przez fervi (2013-11-27 00:26:14)

Offline

 

#15  2013-11-27 00:32:17

  Miziak - Użytkownik

Miziak
Użytkownik
Skąd: ok. Płocka
Zarejestrowany: 2010-11-03

Re: Nvidia Optimus problem po aktualizacji.

To tak cała sekwencja pokażę bo niby bbswtch wstaje ale po próbie opalenia czegokolwiek "umiera" i już nie wstanie:

Kod:

miziak@debian:~$ cat /proc/acpi/bbswitch
0000:01:00.0 OFF
miziak@debian:~$ sudo tee /proc/acpi/bbswitch <<<ON
[sudo] password for miziak: 
ON
miziak@debian:~$ cat /proc/acpi/bbswitch
0000:01:00.0 ON
miziak@debian:~$ optirun glxgears
[  184.569081] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0.  Please

[  184.569137] [ERROR]Aborting because fallback start is disabled.
miziak@debian:~$ cat /proc/acpi/bbswitch
0000:01:00.0 OFF

A jak te acpi... wyplenić ;może to to coś miesza.


http://img827.imageshack.us/img827/778/linuxfr8.gif

Offline

 

#16  2013-11-27 00:38:04

  fervi - Użytkownik

fervi
Użytkownik
Zarejestrowany: 2010-03-14

Re: Nvidia Optimus problem po aktualizacji.

Kod:

cat /etc/bumblebee/bumblebee.conf

Muszę być pewny wszystkiego :D

Fervi

Offline

 

#17  2013-11-27 00:50:10

  Miziak - Użytkownik

Miziak
Użytkownik
Skąd: ok. Płocka
Zarejestrowany: 2010-11-03

Re: Nvidia Optimus problem po aktualizacji.

Proszę xD

Kod:

miziak@debian:~$ cat /etc/bumblebee/bumblebee.conf
# Configuration file for Bumblebee. Values should **not** be put between quotes

## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d

## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=auto
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus:/usr/lib/primus:/usr/lib32/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false


# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
#         bbswitch - new in BB 3, recommended if available
#       switcheroo - vga_switcheroo method, use at your own risk
#             none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods

## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia-current
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/x86_64-linux-gnu/nvidia:/usr/lib/i386-linux-gnu/nvidia:/usr/lib/nvidia
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia

## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau

http://img827.imageshack.us/img827/778/linuxfr8.gif

Offline

 

#18  2013-11-27 00:56:25

  fervi - Użytkownik

fervi
Użytkownik
Zarejestrowany: 2010-03-14

Re: Nvidia Optimus problem po aktualizacji.

Kod:

dpkg --list | grep dkms

Spróbuj odpalić na kernelu 3.9 i daj znać czy działa

Ja o 7:30-8:00 sprawdzę co tu wymodziłeś

Fervi

PS. Co zwraca

Kod:

sudo modprobe nvidia
sudo modprobe nvidia-current

Ostatnio edytowany przez fervi (2013-11-27 00:57:38)

Offline

 

#19  2013-11-27 01:08:08

  miszasty93 - Użytkownik

miszasty93
Użytkownik
Zarejestrowany: 2013-08-21

Re: Nvidia Optimus problem po aktualizacji.

Ja nvidie wyłączałem wg. tutka na stronie crunchbanga, możesz też zerknąć na kernel 3.12 który wyłącza kartę (własciwie potrafi ją też włączyć jeśli jest taka potrzeba) na sterownikach otwartych.

Offline

 

#20  2013-11-27 07:47:39

  fervi - Użytkownik

fervi
Użytkownik
Zarejestrowany: 2010-03-14

Re: Nvidia Optimus problem po aktualizacji.

Można też użyć zawsze nvidia-prime, ale nie wiem gdzie tego szukać w Debianie ;P

https://github.com/Bumblebee-Project/Bumblebee/issues
Tu możesz zgłosić swój problem

Fervi

Offline

 

#21  2013-11-27 11:09:58

  Miziak - Użytkownik

Miziak
Użytkownik
Skąd: ok. Płocka
Zarejestrowany: 2010-11-03

Re: Nvidia Optimus problem po aktualizacji.

Kod:

miziak@debian:~$ dpkg --list | grep dkms
ii  bbswitch-dkms                         0.7-2                           amd64        Interface for toggling the power on nVidia Optimus video cards
ii  dkms                                  2.2.0.3-1.2                     all          Dynamic Kernel Module Support Framework
ii  nvidia-kernel-dkms                    319.72-1                        amd64        NVIDIA binary kernel module DKMS source

Kod:

miziak@debian:~$ sudo modprobe nvidia
[sudo] password for miziak: 
miziak@debian:~$ sudo modprobe nvidia-current
ERROR: could not insert 'nvidia_current': No such device

Na jądrze 3.9 niby działa ale śmieszne jest to że tam wcale nie ma bbswitch ale działa optirun ale ma niskie fps czyli pewnie śmiga na intelu.


http://img827.imageshack.us/img827/778/linuxfr8.gif

Offline

 

#22  2013-11-27 14:33:18

  sypu - Użytkownik

sypu
Użytkownik
Zarejestrowany: 2011-11-10

Re: Nvidia Optimus problem po aktualizacji.

Czytam z zainteresowaniem ten wątek bo sam na świeżo kupionym laptopie próbuję uruchomić wsparcie dla nvidii. Instalowałem bumblee według wiki https://wiki.debian.org/Bumblebee dla architektury 64bit. Jak na razie próba odpalenia optirun konczy sie tak:

Kod:

optirun glxgears
[ 8292.711015] [ERROR]Cannot access secondary GPU - error: Could not load GPU driver

[ 8292.711067] [ERROR]Aborting because fallback start is disabled.

Po wykonaniu 
modprobe nvidia
modprobe nvidia-current

Kod:

 optirun glxgears
304 frames in 5.0 seconds = 60.797 FPS
300 frames in 5.0 seconds = 59.984 FPS
300 frames in 5.0 seconds = 59.994 FPS

Kod:

 glxgears
Running synchronized to the vertical refresh.  The framerate should be
approximately the same as the monitor refresh rate.
303 frames in 5.0 seconds = 60.418 FPS
300 frames in 5.0 seconds = 59.989 FPS
300 frames in 5.0 seconds = 59.990 FPS

I nie wiem jak zmusić nvidie do pracy.

Kod:

uname -a
Linux kajko-kokosz 3.11-2-amd64 #1 SMP Debian 3.11.8-1 (2013-11-13) x86_64 GNU/Linux

Kod:

lspci | grep VGA
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)

- czemu tu nie widać karty nvidii?

Kod:

lspci -k
00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09)
    Subsystem: ASUSTeK Computer Inc. Device 124d
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port (rev 09)
    Kernel driver in use: pcieport
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
    Subsystem: ASUSTeK Computer Inc. Device 124d
    Kernel driver in use: i915
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
    Subsystem: ASUSTeK Computer Inc. Device 124d
    Kernel driver in use: xhci_hcd
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
    Subsystem: ASUSTeK Computer Inc. Device 124d
    Kernel driver in use: mei_me
00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
    Subsystem: ASUSTeK Computer Inc. Device 124d
    Kernel driver in use: ehci-pci
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
    Subsystem: ASUSTeK Computer Inc. Device 124d
    Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4)
    Kernel driver in use: pcieport
00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4)
    Kernel driver in use: pcieport
00:1c.3 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 4 (rev c4)
    Kernel driver in use: pcieport
00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
    Subsystem: ASUSTeK Computer Inc. Device 124d
    Kernel driver in use: ehci-pci
00:1f.0 ISA bridge: Intel Corporation HM76 Express Chipset LPC Controller (rev 04)
    Subsystem: ASUSTeK Computer Inc. Device 124d
    Kernel driver in use: lpc_ich
00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04)
    Subsystem: ASUSTeK Computer Inc. Device 124d
    Kernel driver in use: ahci
00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
    Subsystem: ASUSTeK Computer Inc. Device 124d
01:00.0 3D controller: NVIDIA Corporation GF117M [GeForce 610M/710M / GT 620M/625M/630M/720M] (rev ff)
03:00.0 Network controller: Qualcomm Atheros AR9485 Wireless Network Adapter (rev 01)
    Subsystem: AzureWave Device 2c97
    Kernel driver in use: ath9k
04:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device 5289 (rev 01)
    Subsystem: ASUSTeK Computer Inc. Device 202f
    Kernel driver in use: rtsx_pci
04:00.2 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 0a)
    Subsystem: ASUSTeK Computer Inc. Device 200f
    Kernel driver in use: r8169

i jeszcze config trzmiela

Kod:

cat /etc/bumblebee/bumblebee.conf
# Configuration file for Bumblebee. Values should **not** be put between quotes

## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d

## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=auto
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus:/usr/lib/primus:/usr/lib32/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false


# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
#         bbswitch - new in BB 3, recommended if available
#       switcheroo - vga_switcheroo method, use at your own risk
#             none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods

## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia-current
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/x86_64-linux-gnu/nvidia:/usr/lib/i386-linux-gnu/nvidia:/usr/lib/nvidia
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia

## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau

Będę wdzięczny za pomoc.

Offline

 

#23  2014-01-04 19:04:53

  wojtos93 - Użytkownik

wojtos93
Użytkownik
Zarejestrowany: 2014-01-04

Re: Nvidia Optimus problem po aktualizacji.

Witam wszystkich z okazji mojego pierwszego posta na tym forum. @sypu spróbuj dopisać do Driver=   "nvidia".
U mnie występuje podobny problem jak u kolegi sypu na początku.
optirun glxgears zwraca:

Kod:

[ 1224.692309] [ERROR]Cannot access secondary GPU - error: Could not enable discrete graphics card

debian testing + sterownik nvidia 331.20 z repozytoriów experimental + kernel 3.12-1 z unstable

bumblebee.conf:

Kod:

# Configuration file for Bumblebee. Values should **not** be put between quotes

## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=nvidia
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d

## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=auto
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus:/usr/lib/primus:/usr/lib32/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false


# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
#         bbswitch - new in BB 3, recommended if available
#       switcheroo - vga_switcheroo method, use at your own risk
#             none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods

## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia-current
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/x86_64-linux-gnu/nvidia:/usr/lib/i386-linux-gnu/nvidia:/usr/lib/nvidia
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia

## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau

xorg.conf.nvidia:

Kod:

Section "ServerLayout"
    Identifier "Layout0"
    Option "AutoAddDevices" "false"
    EndSection

    Section "Device"
    Identifier "Device1"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    BusID "PCI:1:0:0"
    Option "NoLogo" "true"
    Option "UseEDID" "false"
    Option "ConnectedMonitor" "DFP"
    Option "UseDisplayDevice" "none"
    EndSection

Offline

 

Stopka forum

Powered by PunBB
© Copyright 2002–2005 Rickard Andersson
Nas ludzie lubią po prostu, a nie klikając w przyciski ;-)