Forum Debian Users Gang

nightmare · 2013-03-22 22:38:22

Witam wszystkich jest to mój pierwszy post na forum. Gdybym złamał jakąś zasadę lub popełnił błąd bardzo proszę o wyrozumiałość.

Posiadam Laptop Toshiba Sateliite L555
Procesor: Intel(R) Core(TM) i3 CPU M 330 @ 2.13GHz
Karta Graficzna: Radeon HD 5145

Kod:

wino@toshiba:~$ lspci | grep VGA
01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RV710 [Mobility Radeon HD 4500/5100 Series]

RAM: 4GB
System operacyjny: Debian Wheezy (testing) - AMD64

Zainstalowałem Debiana. Pobrałem paczkę firmware-linux-nonfree. Zaktualizowałem sterowniki xserver-xorg-video-ati, xserver-xorg-video-radeon. System działał stabline lecz glxgears pokazywał 60 FPS.
Stworzyłem plik xorg.conf. Problem FPSów się rozwiązał (pokazuje między 800, a 1200) jednak zacina mi się youtube, ale tylko gdy daję na pełny ekran oraz programy na których bardzo mi zależy inkscape i gimp.
Nie wiem czy to wina karty graficznej, czy może czegoś innego. Sprzęt nie jest najgorszy, próbowałem na windowsie i wszystko ładnie śmiga więc nie jest to wina hardwaru tylko bardziej softu.
Dodam także, że zainstalowałem na chwilę sterowniki Catalyst 13.1 legacy. Problem youtuba się rozwiązał jednak inkscape oraz gimp nadal chodziły mało płynnie.
Proszę o pomoc w rozwiązaniu problemu.

Mój xorg.conf:

Kod:

root@toshiba:~# cat /etc/X11/xorg.conf
Section "Device"
        Identifier "RV710"
        Driver "radeon"
        Option "SwapbuffersWait" "off"
EndSection
Section "dri"
        Mode 0666
EndSection

wersja flashplayera

Kod:

root@toshiba:~# dpkg -l | grep flash
ii  flashplugin-nonfree                   1:3.2                              amd64        Adobe Flash Player - browser plugin

yossarian · 2013-03-22 22:44:59

Witamy na forum :)

Jaki problem fps?
Prawdopodobnie było dobrze. 60 bo włączona synchronizacja.

Zainstalowałeś sterowniki zamknięte, a w xorg.conf masz:

Driver "radeon"

Wszystko totalnie pomieszane.

nightmare · 2013-03-22 22:55:52

Powiem szczerze, że trochę bezmyślnie skopiowałem xorg.conf z tego poradnika. Dotyczy sterowników otwartych więc myślałem, że tak ma być.
http://en.gentoo-wiki.com/wiki/Radeon#Flickering_on_wine_and_low_FPS

Jak w takim razie to powinno wyglądać?
Tak jak pisałem liczba FPS skoczyła w górę, jednak komputer chodzi nadal tak samo.
Jakieś pomysły?

Ostatnio edytowany przez nightmare (2013-03-22 22:56:27)

yossarian · 2013-03-22 23:25:16

Usuń obecny plik xorg.con.
Zainstaluj sterowniki fglrx-legacy-driver.
Po restarcie pokaż zawartość nowego xorg.conf i Xorg.0.log

nightmare · 2013-03-22 23:52:25

Dodałem repozytorium experimental.

Kod:

root@toshiba:~# cat /etc/apt/sources.list
deb http://ftp.pl.debian.org/debian testing main contrib non-free
deb-src http://ftp.pl.debian.org/debian testing main contrib non-free

deb http://ftp.debian.org/debian/ wheezy-updates main contrib non-free
deb-src http://ftp.debian.org/debian/ wheezy-updates main contrib non-free

deb http://security.debian.org/ wheezy/updates main contrib non-free
deb-src http://security.debian.org/ wheezy/updates main contrib non-free

deb http://ftp.pl.debian.org/debian experimental main non-free
]

Są jakieś niespełnione zależności! Nie wiem niestety jak to ugryźć proszę o dalszą pomoc.

Kod:

root@toshiba:~# aptitude install fglrx-legacy-driver 
Następujące NOWE pakiety zostaną zainstalowane:   
  fglrx-legacy-driver{b} libfglrx-legacy{a} libfglrx-legacy-amdxvba1{a} libgl1-fglrx-legacy-glx{ab} 
Następujące pakiety POLECANE przez inne NIE zostaną zainstalowane:
  fglrx-legacy-atieventsd fglrx-legacy-modules-dkms 
0 pakietów aktualizowanych, 4 instalowanych, 0 do usunięcia i 0 nieaktualizowanych.
Do pobrania 18,0 MB archiwów. Zajęte po rozpakowaniu: 80,8 MB.
Następujące pakiety mają niespełnione zależności:
 fglrx-legacy-driver : Wymaga: glx-alternative-fglrx (>= 0.2.90) ale nie ma być instalowany.
 libgl1-fglrx-legacy-glx : Wymaga: glx-alternative-fglrx (>= 0.2.90) ale nie ma być instalowany.
Następujące działania rozwiążą problemy z zależnościami:

     Zatrzymanie bieżących wersji następujących pakietów:              
1)     fglrx-legacy-driver [niezainstalowany]                          
2)     libfglrx-legacy-amdxvba1 [niezainstalowany]                     
3)     libgl1-fglrx-legacy-glx [niezainstalowany]                      

     Pozostawienie następujących problemów z zależnościami:            
4)     libfglrx-legacy poleca libfglrx-legacy-amdxvba1 (= 8.97.100.7-1)


Zaakceptować rozwiązanie? [Y/n/q/?] y
Nie zostaną zainstalowane, zaktualizowane ani usunięte żadne pakiety.
0 pakietów aktualizowanych, 0 instalowanych, 0 do usunięcia i 0 nieaktualizowanych.
Do pobrania 0 B archiwów. Zajęte po rozpakowaniu: 0 B.

Ostatnio edytowany przez nightmare (2013-03-22 23:58:23)

ArnVaker · 2013-03-23 00:05:25

Tak zobacz:

Kod:

aptitude -t experimental install fglrx-legacy-driver

Ewentualnie poklikaj „n” i zobacz jakie inne rozwiązania aptitude zaproponuje.

nightmare · 2013-03-23 00:14:26

Aptitude ma tylko jeden pomysł. Jednak jak go akceptuje to nie instaluje driverów.
Jakieś pomysły :) ?
Poprzednio Catalyst 13.1 legacy
zainstalowałem pobierając paczkę ze strony amd
a następnie
sh *.run kilka paczek doinstalowałem i poszło, ale nie przyniosło to upragnionych efektów.

Kod:

root@toshiba:~# aptitude -t experimental install fglrx-legacy-driver
Następujące NOWE pakiety zostaną zainstalowane:
  fglrx-legacy-driver{b} libfglrx-legacy{a} libfglrx-legacy-amdxvba1{a} 
  libgl1-fglrx-legacy-glx{ab} 
Następujące pakiety POLECANE przez inne NIE zostaną zainstalowane:
  fglrx-legacy-atieventsd fglrx-legacy-modules-dkms 
0 pakietów aktualizowanych, 4 instalowanych, 0 do usunięcia i 560 nieaktualizowanych.
Do pobrania 18,0 MB archiwów. Zajęte po rozpakowaniu: 80,8 MB.
Następujące pakiety mają niespełnione zależności:
 fglrx-legacy-driver : Wymaga: glx-alternative-fglrx (>= 0.2.90) ale nie ma być instalowany.
 libgl1-fglrx-legacy-glx : Wymaga: glx-alternative-fglrx (>= 0.2.90) ale nie ma być instalowany.
Następujące działania rozwiążą problemy z zależnościami:

     Zatrzymanie bieżących wersji następujących pakietów:              
1)     fglrx-legacy-driver [niezainstalowany]                          
2)     libfglrx-legacy-amdxvba1 [niezainstalowany]                     
3)     libgl1-fglrx-legacy-glx [niezainstalowany]                      

     Pozostawienie następujących problemów z zależnościami:            
4)     libfglrx-legacy poleca libfglrx-legacy-amdxvba1 (= 8.97.100.7-1)


Zaakceptować rozwiązanie? [Y/n/q/?] n

*** Nie ma więcej rozwiązań ***

Następujące działania rozwiążą problemy z zależnościami:

     Zatrzymanie bieżących wersji następujących pakietów:              
1)     fglrx-legacy-driver [niezainstalowany]                          
2)     libfglrx-legacy-amdxvba1 [niezainstalowany]                     
3)     libgl1-fglrx-legacy-glx [niezainstalowany]                      

     Pozostawienie następujących problemów z zależnościami:            
4)     libfglrx-legacy poleca libfglrx-legacy-amdxvba1 (= 8.97.100.7-1)


Zaakceptować rozwiązanie? [Y/n/q/?] Y
Nie zostaną zainstalowane, zaktualizowane ani usunięte żadne pakiety.
0 pakietów aktualizowanych, 0 instalowanych, 0 do usunięcia i 560 nieaktualizowanych.
Do pobrania 0 B archiwów. Zajęte po rozpakowaniu: 0 B.

ArnVaker · 2013-03-23 00:25:44

Sekcji contrib repozytorium experimental nie dodałeś, stąd problem z instalacją. Gdybyś instalował z repozytorium, to usuń najpierw to co instalowałeś skryptem. Przy czym jeśli zainstalowałeś prawidłowo ze skryptu (tzn. wygenerowałeś jeszcze xorg.conf i system faktycznie używa tych sterowników), to efekt powinien być taki sam. To te same sterowniki, jedynie sposób instalacji inny.

gindek · 2013-03-23 00:36:08

Witam na forum.
Nie chce sie za bardzo deklarowac bo nie wiem jak bedzie z czasem, ale wstepnie moge zadeklarowac pomoc osobiście :-).
Config mam teoretycznie zblizony
M380 + HD5650
Uzywam zamknietych sterownikow distro testing ( wheezy i686-pae) wiec instalacje tego syfu mam za soba :-).
Mieszkam w okolicy matecznego.

ArnVaker · 2013-03-23 00:39:08

A tak właściwie to dlaczego instalujemy sterowniki legacy? Ja się nie znam kompletnie na Radeonach, ale one są chyba dla serii 2, 3 i 4 tylko.

nightmare · 2013-03-23 00:56:41

@ArnVaker
Oczywiście wcześniej przed instalacją usunąłem te sterowniki, przeinstalowałem xserver-xorg-video-ati oraz mese.
Też byłem zdziwiony, że instaluję fglrx-legacy. Moja karta jest niestety porzucona jako jeden z nielicznych hd5*** może stąd te problemy.
http://wiki.cchtml.com/index.php/Hardware#Older_Rad … pen_Source.29

@Gindek
Dzięki. Jak się nie uda to zgłoszę się do Ciebie na razie leżę chory w domu i mam trochę więcej czasu więc konfiguruję :)

No i porobiło się :) Instalacja przebiegła pomyślę. Gnome shell nie odpalił się. Piszę z gnome-classic.

Kod:

wino@toshiba:~$ fglrxinfo
X Error of failed request:  BadRequest (invalid request code or no such operation)
  Major opcode of failed request:  139 (ATIFGLEXTENSION)
  Minor opcode of failed request:  66 ()
  Serial number of failed request:  13
  Current serial number in output stream:  13

Kod:

wino@toshiba:~$ cat /etc/X11/xorg.conf
Section "ServerLayout"
    Identifier     "aticonfig Layout"
    Screen      0  "aticonfig-Screen[0]-0" 0 0
EndSection

Section "Module"
EndSection

Section "Monitor"
    Identifier   "aticonfig-Monitor[0]-0"
    Option        "VendorName" "ATI Proprietary Driver"
    Option        "ModelName" "Generic Autodetecting Monitor"
    Option        "DPMS" "true"
EndSection

Section "Device"
    Identifier  "aticonfig-Device[0]-0"
    Driver      "fglrx"
    BusID       "PCI:1:0:0"
EndSection

Section "Screen"
    Identifier "aticonfig-Screen[0]-0"
    Device     "aticonfig-Device[0]-0"
    Monitor    "aticonfig-Monitor[0]-0"
    DefaultDepth     24
    SubSection "Display"
        Viewport   0 0
        Depth     24
    EndSubSection
EndSection

X.0.log

Kod:

[    23.092] 
X.Org X Server 1.12.4
Release Date: 2012-08-27
[    23.092] X Protocol Version 11, Revision 0
[    23.093] Build Operating System: Linux 3.2.0-4.drm-amd64 x86_64 Debian
[    23.093] Current Operating System: Linux toshiba 3.2.0-4-amd64 #1 SMP Debian 3.2.39-2 x86_64
[    23.093] Kernel command line: BOOT_IMAGE=/vmlinuz-3.2.0-4-amd64 root=/dev/mapper/debian-root ro quiet
[    23.093] Build Date: 23 February 2013  02:40:45PM
[    23.093] xorg-server 2:1.12.4-5 (Julien Cristau <jcristau@debian.org>) 
[    23.093] Current version of pixman: 0.26.0
[    23.093]     Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[    23.093] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    23.093] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Mar 23 00:44:43 2013
[    23.111] (==) Using config file: "/etc/X11/xorg.conf"
[    23.111] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    23.159] (==) ServerLayout "aticonfig Layout"
[    23.159] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[    23.159] (**) |   |-->Monitor "aticonfig-Monitor[0]-0"
[    23.160] (**) |   |-->Device "aticonfig-Device[0]-0"
[    23.160] (==) Automatically adding devices
[    23.160] (==) Automatically enabling devices
[    23.209] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    23.209]     Entry deleted from font path.
[    23.232] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[    23.232]     Entry deleted from font path.
[    23.232] (==) FontPath set to:
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/100dpi/:unscaled,
    /usr/share/fonts/X11/75dpi/:unscaled,
    /usr/share/fonts/X11/Type1,
    /usr/share/fonts/X11/100dpi,
    /usr/share/fonts/X11/75dpi,
    built-ins
[    23.232] (==) ModulePath set to "/usr/lib/xorg/modules"
[    23.233] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
[    23.233] (II) Loader magic: 0x7fab1cbc4ae0
[    23.233] (II) Module ABI versions:
[    23.233]     X.Org ANSI C Emulation: 0.4
[    23.233]     X.Org Video Driver: 12.1
[    23.233]     X.Org XInput driver : 16.0
[    23.233]     X.Org Server Extension : 6.0
[    23.237] (--) PCI:*(0:1:0:0) 1002:9553:1179:ff82 rev 0, Mem @ 0xc0000000/268435456, 0xd6200000/65536, I/O @ 0x0000a000/256, BIOS @ 0x????????/131072
[    23.237] (II) Open ACPI successful (/var/run/acpid.socket)
[    23.237] (II) "extmod" will be loaded by default.
[    23.237] (II) "dbe" will be loaded by default.
[    23.237] (II) "glx" will be loaded by default.
[    23.238] (II) "record" will be loaded by default.
[    23.238] (II) "dri" will be loaded by default.
[    23.238] (II) "dri2" will be loaded by default.
[    23.238] (II) LoadModule: "extmod"
[    23.289] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    23.309] (II) Module extmod: vendor="X.Org Foundation"
[    23.309]     compiled for 1.12.4, module version = 1.0.0
[    23.309]     Module class: X.Org Server Extension
[    23.309]     ABI class: X.Org Server Extension, version 6.0
[    23.309] (II) Loading extension SELinux
[    23.309] (II) Loading extension MIT-SCREEN-SAVER
[    23.309] (II) Loading extension XFree86-VidModeExtension
[    23.309] (II) Loading extension XFree86-DGA
[    23.309] (II) Loading extension DPMS
[    23.309] (II) Loading extension XVideo
[    23.309] (II) Loading extension XVideo-MotionCompensation
[    23.309] (II) Loading extension X-Resource
[    23.309] (II) LoadModule: "dbe"
[    23.310] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    23.317] (II) Module dbe: vendor="X.Org Foundation"
[    23.317]     compiled for 1.12.4, module version = 1.0.0
[    23.317]     Module class: X.Org Server Extension
[    23.317]     ABI class: X.Org Server Extension, version 6.0
[    23.317] (II) Loading extension DOUBLE-BUFFER
[    23.317] (II) LoadModule: "glx"
[    23.317] (II) Loading /usr/lib/xorg/modules/linux/libglx.so
[    23.343] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[    23.343]     compiled for 6.9.0, module version = 1.0.0
[    23.343] (II) Loading extension GLX
[    23.343] (II) LoadModule: "record"
[    23.344] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    23.346] (II) Module record: vendor="X.Org Foundation"
[    23.346]     compiled for 1.12.4, module version = 1.13.0
[    23.346]     Module class: X.Org Server Extension
[    23.346]     ABI class: X.Org Server Extension, version 6.0
[    23.346] (II) Loading extension RECORD
[    23.346] (II) LoadModule: "dri"
[    23.347] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    23.365] (II) Module dri: vendor="X.Org Foundation"
[    23.365]     compiled for 1.12.4, module version = 1.0.0
[    23.365]     ABI class: X.Org Server Extension, version 6.0
[    23.365] (II) Loading extension XFree86-DRI
[    23.365] (II) LoadModule: "dri2"
[    23.365] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    23.366] (II) Module dri2: vendor="X.Org Foundation"
[    23.366]     compiled for 1.12.4, module version = 1.2.0
[    23.366]     ABI class: X.Org Server Extension, version 6.0
[    23.366] (II) Loading extension DRI2
[    23.366] (II) LoadModule: "fglrx"
[    23.366] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[    23.623] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
[    23.623]     compiled for 1.4.99.906, module version = 8.97.2
[    23.623]     Module class: X.Org Video Driver
[    23.625] (II) Loading sub module "fglrxdrm"
[    23.625] (II) LoadModule: "fglrxdrm"
[    23.625] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[    23.644] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[    23.644]     compiled for 1.4.99.906, module version = 8.97.2
[    23.644] (II) ATI Proprietary Linux Driver Version Identifier:8.97.2
[    23.644] (II) ATI Proprietary Linux Driver Release Identifier: 8.97.100.7                           
[    23.644] (II) ATI Proprietary Linux Driver Build Date: Nov 16 2012 14:45:00
[    23.645] (++) using VT number 7

[    23.657] (WW) Falling back to old probe method for fglrx
[    23.695] (II) Loading PCS database from /etc/ati/amdpcsdb
[    23.698] (--) Chipset Supported AMD Graphics Processor (0x9553) found
[    23.709] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[    23.710] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[    23.711] (II) AMD Video driver is signed
[    23.711] (II) fglrx(0): pEnt->device->identifier=0x7fab1d9d5700
[    23.711] (II) fglrx(0): === [xdl_xs112_atiddxPreInit] === begin
[    23.712] (II) Loading sub module "vgahw"
[    23.712] (II) LoadModule: "vgahw"
[    23.712] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[    23.728] (II) Module vgahw: vendor="X.Org Foundation"
[    23.728]     compiled for 1.12.4, module version = 0.1.0
[    23.728]     ABI class: X.Org Video Driver, version 12.1
[    23.728] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[    23.728] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[    23.728] (==) fglrx(0): Default visual is TrueColor
[    23.728] (**) fglrx(0): Option "DPMS" "true"
[    23.728] (==) fglrx(0): RGB weight 888
[    23.728] (II) fglrx(0): Using 8 bits per RGB 
[    23.729] (==) fglrx(0): Buffer Tiling is ON
[    23.729] (II) Loading sub module "fglrxdrm"
[    23.730] (II) LoadModule: "fglrxdrm"
[    23.730] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[    23.730] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[    23.730]     compiled for 1.4.99.906, module version = 8.97.2
[    23.735] ukiDynamicMajor: failed to open /proc/ati/major
[    23.735] ukiDynamicMajor: failed to open /proc/ati/major
[    23.735] (**) fglrx(0): NoAccel = NO
[    23.736] (**) fglrx(0): ATI 2D Acceleration Architecture enabled
[    23.736] (--) fglrx(0): Chipset: "ATI Mobility Radeon HD 4500/5100 Series" (Chipset = 0x9553)
[    23.736] (--) fglrx(0): (PciSubVendor = 0x1179, PciSubDevice = 0xff82)
[    23.736] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
[    23.736] (--) fglrx(0): Linear framebuffer (phys) at 0xc0000000
[    23.736] (--) fglrx(0): MMIO registers at 0xd6200000
[    23.736] (--) fglrx(0): I/O port at 0x0000a000
[    23.736] (==) fglrx(0): ROM-BIOS at 0x000c0000
[    23.754] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[    23.940] (II) Loading sub module "vbe"
[    23.940] (II) LoadModule: "vbe"
[    23.941] (II) Loading /usr/lib/xorg/modules/libvbe.so
[    23.963] (II) Module vbe: vendor="X.Org Foundation"
[    23.963]     compiled for 1.12.4, module version = 1.1.0
[    23.963]     ABI class: X.Org Video Driver, version 12.1
[    23.965] (II) fglrx(0): VESA BIOS detected
[    23.965] (II) fglrx(0): VESA VBE Version 3.0
[    23.965] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[    23.965] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
[    23.965] (II) fglrx(0): VESA VBE OEM Software Rev: 11.22
[    23.965] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc. 
[    23.965] (II) fglrx(0): VESA VBE OEM Product: M92
[    23.965] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[    24.006] (II) fglrx(0): ATI Video BIOS revision 9 or later detected
[    24.007] (--) fglrx(0): Video RAM: 524288 kByte, Type: DDR3
[    24.007] (II) fglrx(0): PCIE card detected
[    24.007] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[    24.007] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[    24.007] (WW) fglrx(0): Hasn't establisted DRM connection
[    24.007] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x20000000)
[    24.007] (WW) fglrx(0): No DRM connection for driver fglrx.
[    24.007] (II) fglrx(0): RandR 1.2 support is enabled!
[    24.007] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[    24.007] (==) fglrx(0): Center Mode is disabled 
[    24.007] (II) Loading sub module "fb"
[    24.007] (II) LoadModule: "fb"
[    24.008] (II) Loading /usr/lib/xorg/modules/libfb.so
[    24.016] (II) Module fb: vendor="X.Org Foundation"
[    24.016]     compiled for 1.12.4, module version = 1.0.0
[    24.016]     ABI class: X.Org ANSI C Emulation, version 0.4
[    24.016] (II) Loading sub module "ddc"
[    24.016] (II) LoadModule: "ddc"
[    24.016] (II) Module "ddc" already built-in
[    24.344] (II) fglrx(0): Output LVDS using monitor section aticonfig-Monitor[0]-0
[    24.344] (II) fglrx(0): Output DFP1 has no monitor section
[    24.344] (II) fglrx(0): Output DFP2 has no monitor section
[    24.344] (II) fglrx(0): Output CRT1 has no monitor section
[    24.344] (II) Loading sub module "ddc"
[    24.344] (II) LoadModule: "ddc"
[    24.344] (II) Module "ddc" already built-in
[    24.344] (II) fglrx(0): Connected Display0: LVDS
[    24.344] (II) fglrx(0): Display0 EDID data ---------------------------
[    24.344] (II) fglrx(0): Manufacturer: LGD  Model: 1ca  Serial#: 0
[    24.344] (II) fglrx(0): Year: 2008  Week: 0
[    24.344] (II) fglrx(0): EDID Version: 1.3
[    24.344] (II) fglrx(0): Digital Display Input
[    24.344] (II) fglrx(0): Max Image Size [cm]: horiz.: 38  vert.: 21
[    24.344] (II) fglrx(0): Gamma: 2.20
[    24.344] (II) fglrx(0): No DPMS capabilities specified
[    24.344] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    24.344] (II) fglrx(0): First detailed timing is preferred mode
[    24.344] (II) fglrx(0): redX: 0.615 redY: 0.346   greenX: 0.314 greenY: 0.602
[    24.344] (II) fglrx(0): blueX: 0.151 blueY: 0.109   whiteX: 0.312 whiteY: 0.328
[    24.344] (II) fglrx(0): Manufacturer's mask: 0
[    24.345] (II) fglrx(0): Supported detailed timing:
[    24.345] (II) fglrx(0): clock: 97.8 MHz   Image Size:  382 x 215 mm
[    24.345] (II) fglrx(0): h_active: 1600  h_sync: 1648  h_sync_end 1696 h_blank_end 1784 h_border: 0
[    24.345] (II) fglrx(0): v_active: 900  v_sync: 902  v_sync_end 905 v_blanking: 912 v_border: 0
[    24.345] (II) fglrx(0):  
[    24.345] (II) fglrx(0):  LP173WD1-TLA1
[    24.345] (II) fglrx(0): EDID (in hex):
[    24.345] (II) fglrx(0):     00ffffffffffff0030e4ca0100000000
[    24.345] (II) fglrx(0):     00120103802615780aa8c09d58509a26
[    24.345] (II) fglrx(0):     1c505400000001010101010101010101
[    24.345] (II) fglrx(0):     0101010101012f2640b860840c303030
[    24.345] (II) fglrx(0):     23007ed7100000190000000000000000
[    24.345] (II) fglrx(0):     00000000000000000000000000fe0000
[    24.345] (II) fglrx(0):     00004c47446973706c61790a000000fe
[    24.345] (II) fglrx(0):     004c503137335744312d544c41310078
[    24.345] (II) fglrx(0): End of Display0 EDID data --------------------
[    24.462] (II) fglrx(0): EDID for output LVDS
[    24.462] (II) fglrx(0): Manufacturer: LGD  Model: 1ca  Serial#: 0
[    24.462] (II) fglrx(0): Year: 2008  Week: 0
[    24.462] (II) fglrx(0): EDID Version: 1.3
[    24.462] (II) fglrx(0): Digital Display Input
[    24.462] (II) fglrx(0): Max Image Size [cm]: horiz.: 38  vert.: 21
[    24.462] (II) fglrx(0): Gamma: 2.20
[    24.462] (II) fglrx(0): No DPMS capabilities specified
[    24.463] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    24.463] (II) fglrx(0): First detailed timing is preferred mode
[    24.463] (II) fglrx(0): redX: 0.615 redY: 0.346   greenX: 0.314 greenY: 0.602
[    24.463] (II) fglrx(0): blueX: 0.151 blueY: 0.109   whiteX: 0.312 whiteY: 0.328
[    24.463] (II) fglrx(0): Manufacturer's mask: 0
[    24.463] (II) fglrx(0): Supported detailed timing:
[    24.463] (II) fglrx(0): clock: 97.8 MHz   Image Size:  382 x 215 mm
[    24.463] (II) fglrx(0): h_active: 1600  h_sync: 1648  h_sync_end 1696 h_blank_end 1784 h_border: 0
[    24.463] (II) fglrx(0): v_active: 900  v_sync: 902  v_sync_end 905 v_blanking: 912 v_border: 0
[    24.463] (II) fglrx(0):  
[    24.463] (II) fglrx(0):  LP173WD1-TLA1
[    24.463] (II) fglrx(0): EDID (in hex):
[    24.463] (II) fglrx(0):     00ffffffffffff0030e4ca0100000000
[    24.463] (II) fglrx(0):     00120103802615780aa8c09d58509a26
[    24.463] (II) fglrx(0):     1c505400000001010101010101010101
[    24.463] (II) fglrx(0):     0101010101012f2640b860840c303030
[    24.463] (II) fglrx(0):     23007ed7100000190000000000000000
[    24.463] (II) fglrx(0):     00000000000000000000000000fe0000
[    24.464] (II) fglrx(0):     00004c47446973706c61790a000000fe
[    24.464] (II) fglrx(0):     004c503137335744312d544c41310078
[    24.464] (II) fglrx(0): EDID vendor "LGD", prod id 458
[    24.464] (II) fglrx(0): Printing DDC gathered Modelines:
[    24.464] (II) fglrx(0): Modeline "1600x900"x0.0   97.75  1600 1648 1696 1784  900 902 905 912 -hsync -vsync (54.8 kHz eP)
[    24.464] (II) fglrx(0): Printing probed modes for output LVDS
[    24.464] (II) fglrx(0): Modeline "1600x900"x60.0   97.75  1600 1648 1696 1784  900 902 905 912 +hsync +vsync (54.8 kHz)
[    24.464] (II) fglrx(0): Modeline "1440x900"x60.0   97.75  1440 1648 1696 1784  900 902 905 912 +hsync +vsync (54.8 kHz)
[    24.465] (II) fglrx(0): Modeline "1280x800"x60.0   97.75  1280 1648 1696 1784  800 902 905 912 +hsync +vsync (54.8 kHz)
[    24.465] (II) fglrx(0): Modeline "1152x864"x60.0   97.75  1152 1648 1696 1784  864 902 905 912 +hsync +vsync (54.8 kHz)
[    24.465] (II) fglrx(0): Modeline "1280x768"x60.0   97.75  1280 1648 1696 1784  768 902 905 912 +hsync +vsync (54.8 kHz)
[    24.465] (II) fglrx(0): Modeline "1280x720"x60.0   97.75  1280 1648 1696 1784  720 902 905 912 +hsync +vsync (54.8 kHz)
[    24.465] (II) fglrx(0): Modeline "1024x768"x60.0   97.75  1024 1648 1696 1784  768 902 905 912 +hsync +vsync (54.8 kHz)
[    24.465] (II) fglrx(0): Modeline "1024x600"x60.0   97.75  1024 1648 1696 1784  600 902 905 912 +hsync +vsync (54.8 kHz)
[    24.465] (II) fglrx(0): Modeline "800x600"x60.0   97.75  800 1648 1696 1784  600 902 905 912 +hsync +vsync (54.8 kHz)
[    24.465] (II) fglrx(0): Modeline "800x480"x60.0   97.75  800 1648 1696 1784  480 902 905 912 +hsync +vsync (54.8 kHz)
[    24.465] (II) fglrx(0): Modeline "720x480"x60.0   97.75  720 1648 1696 1784  480 902 905 912 +hsync +vsync (54.8 kHz)
[    24.465] (II) fglrx(0): Modeline "640x480"x60.0   97.75  640 1648 1696 1784  480 902 905 912 +hsync +vsync (54.8 kHz)
[    24.465] (II) fglrx(0): EDID for output DFP1
[    24.465] (II) fglrx(0): EDID for output DFP2
[    24.465] (II) fglrx(0): EDID for output CRT1
[    24.465] (II) fglrx(0): Output LVDS connected
[    24.465] (II) fglrx(0): Output DFP1 disconnected
[    24.465] (II) fglrx(0): Output DFP2 disconnected
[    24.465] (II) fglrx(0): Output CRT1 disconnected
[    24.466] (II) fglrx(0): Using exact sizes for initial modes
[    24.466] (II) fglrx(0): Output LVDS using initial mode 1600x900
[    24.466] (II) fglrx(0): Display dimensions: (380, 210) mm
[    24.466] (II) fglrx(0): DPI set to (106, 108)
[    24.466] (II) fglrx(0): Adapter ATI Mobility Radeon HD 4500/5100 Series has 2 configurable heads and 1 displays connected.
[    24.466] (==) fglrx(0):  PseudoColor visuals disabled
[    24.466] (II) Loading sub module "ramdac"
[    24.466] (II) LoadModule: "ramdac"
[    24.466] (II) Module "ramdac" already built-in
[    24.467] (==) fglrx(0): NoDRI = NO
[    24.467] (==) fglrx(0): Capabilities: 0x00000000
[    24.467] (==) fglrx(0): CapabilitiesEx: 0x00000000
[    24.467] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[    24.467] (==) fglrx(0): UseFastTLS=0
[    24.467] (==) fglrx(0): BlockSignalsOnLock=1
[    24.467] (--) Depth 24 pixmap format is 32 bpp
[    24.467] (EE) fglrx(0): atiddxDriScreenInit failed, GPS not been initialized. 
[    24.467] (WW) fglrx(0): ***********************************************************
[    24.468] (WW) fglrx(0): * DRI initialization failed                               *
[    24.468] (WW) fglrx(0): * kernel module (fglrx.ko) may be missing or incompatible *
[    24.468] (WW) fglrx(0): * 2D and 3D acceleration disabled                         *
[    24.468] (WW) fglrx(0): ***********************************************************
[    24.524] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x10000000
[    24.750] (II) fglrx(0): FBMM initialized for area (0,0)-(1600,8191)
[    24.750] (II) fglrx(0): FBMM auto alloc for area (0,0)-(1600,1600) (front color buffer - assumption)
[    24.750] (II) fglrx(0): Largest offscreen area available: 1600 x 6591
[    24.751] (==) fglrx(0): Backing store disabled
[    24.751] (II) Loading extension FGLRXEXTENSION
[    24.751] (**) fglrx(0): DPMS enabled
[    24.752] (II) fglrx(0): Initialized in-driver Xinerama extension
[    24.752] (WW) fglrx(0): Textured Video not supported without DRI enabled.
[    24.752] (II) LoadModule: "glesx"
[    24.752] (II) Loading /usr/lib/xorg/modules/glesx.so
[    25.045] (II) Module glesx: vendor="X.Org Foundation"
[    25.045]     compiled for 1.4.99.906, module version = 1.0.0
[    25.045] (II) Loading extension GLESX
[    25.045] (II) fglrx(0): GLESX enableFlags = 512
[    25.056] (II) LoadModule: "amdxmm"
[    25.057] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[    25.066] (II) Module amdxmm: vendor="X.Org Foundation"
[    25.066]     compiled for 1.4.99.906, module version = 2.0.0
[    25.066] (EE) fglrx(0): XMM failed to open CMMQS connection.(EE) fglrx(0): 
[    25.067] (EE) fglrx(0): XMM failed to initialize
[    25.067] (WW) fglrx(0): No XV video playback available
[    25.067] (II) fglrx(0): Enable composite support successfully
[    25.067] (WW) fglrx(0): Option "VendorName" is not used
[    25.067] (WW) fglrx(0): Option "ModelName" is not used
[    25.067] (==) fglrx(0): Silken mouse enabled
[    25.067] (==) fglrx(0): Using HW cursor of display infrastructure!
[    25.068] (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
[    25.068] (II) fglrx(0): 'LVDS LCD' ConnectorType, abstracted as 'Panel'
[    25.069] (II) fglrx(0): 'eDP LCD' ConnectorType, abstracted as 'Panel'
[    26.216] (--) RandR disabled
[    26.216] (II) Initializing built-in extension Generic Event Extension
[    26.216] (II) Initializing built-in extension SHAPE
[    26.216] (II) Initializing built-in extension MIT-SHM
[    26.216] (II) Initializing built-in extension XInputExtension
[    26.216] (II) Initializing built-in extension XTEST
[    26.216] (II) Initializing built-in extension BIG-REQUESTS
[    26.216] (II) Initializing built-in extension SYNC
[    26.216] (II) Initializing built-in extension XKEYBOARD
[    26.216] (II) Initializing built-in extension XC-MISC
[    26.216] (II) Initializing built-in extension SECURITY
[    26.216] (II) Initializing built-in extension XINERAMA
[    26.216] (II) Initializing built-in extension XFIXES
[    26.216] (II) Initializing built-in extension RENDER
[    26.216] (II) Initializing built-in extension RANDR
[    26.216] (II) Initializing built-in extension COMPOSITE
[    26.216] (II) Initializing built-in extension DAMAGE
[    26.216] (II) SELinux: Disabled on system
[    26.220] (II) AIGLX: Screen 0 is not DRI capable
[    26.222] [glesx] __glESXExtensionInit: No GL ES2.0 capable screen found!
[    26.259] (II) fglrx(0): Setting screen physical size to 423 x 238
[    27.276] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    27.276] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    27.276] (II) LoadModule: "evdev"
[    27.276] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    27.291] (II) Module evdev: vendor="X.Org Foundation"
[    27.291]     compiled for 1.12.1, module version = 2.7.0
[    27.291]     Module class: X.Org XInput Driver
[    27.291]     ABI class: X.Org XInput driver, version 16.0
[    27.291] (II) Using input driver 'evdev' for 'Power Button'
[    27.291] (**) Power Button: always reports core events
[    27.291] (**) evdev: Power Button: Device: "/dev/input/event3"
[    27.291] (--) evdev: Power Button: Vendor 0 Product 0x1
[    27.291] (--) evdev: Power Button: Found keys
[    27.291] (II) evdev: Power Button: Configuring as keyboard
[    27.291] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[    27.291] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    27.291] (**) Option "xkb_rules" "evdev"
[    27.291] (**) Option "xkb_model" "pc105"
[    27.292] (**) Option "xkb_layout" "pl"
[    27.672] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[    27.672] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    27.672] (II) Using input driver 'evdev' for 'Video Bus'
[    27.672] (**) Video Bus: always reports core events
[    27.672] (**) evdev: Video Bus: Device: "/dev/input/event4"
[    27.673] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    27.673] (--) evdev: Video Bus: Found keys
[    27.673] (II) evdev: Video Bus: Configuring as keyboard
[    27.673] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input4/event4"
[    27.673] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    27.673] (**) Option "xkb_rules" "evdev"
[    27.673] (**) Option "xkb_model" "pc105"
[    27.673] (**) Option "xkb_layout" "pl"
[    27.674] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    27.674] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    27.674] (II) Using input driver 'evdev' for 'Power Button'
[    27.674] (**) Power Button: always reports core events
[    27.674] (**) evdev: Power Button: Device: "/dev/input/event2"
[    27.674] (--) evdev: Power Button: Vendor 0 Product 0x1
[    27.674] (--) evdev: Power Button: Found keys
[    27.674] (II) evdev: Power Button: Configuring as keyboard
[    27.674] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event2"
[    27.674] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[    27.674] (**) Option "xkb_rules" "evdev"
[    27.674] (**) Option "xkb_model" "pc105"
[    27.674] (**) Option "xkb_layout" "pl"
[    27.676] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[    27.676] (II) No input driver specified, ignoring this device.
[    27.676] (II) This device may have been added with another device file.
[    27.676] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event12)
[    27.677] (II) No input driver specified, ignoring this device.
[    27.677] (II) This device may have been added with another device file.
[    27.677] (II) config/udev: Adding input device USB2.0 UVC WebCam (/dev/input/event8)
[    27.677] (**) USB2.0 UVC WebCam: Applying InputClass "evdev keyboard catchall"
[    27.677] (II) Using input driver 'evdev' for 'USB2.0 UVC WebCam'
[    27.677] (**) USB2.0 UVC WebCam: always reports core events
[    27.677] (**) evdev: USB2.0 UVC WebCam: Device: "/dev/input/event8"
[    27.678] (--) evdev: USB2.0 UVC WebCam: Vendor 0x4f2 Product 0xb128
[    27.678] (--) evdev: USB2.0 UVC WebCam: Found keys
[    27.678] (II) evdev: USB2.0 UVC WebCam: Configuring as keyboard
[    27.678] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input8/event8"
[    27.678] (II) XINPUT: Adding extended input device "USB2.0 UVC WebCam" (type: KEYBOARD, id 9)
[    27.678] (**) Option "xkb_rules" "evdev"
[    27.678] (**) Option "xkb_model" "pc105"
[    27.678] (**) Option "xkb_layout" "pl"
[    27.679] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event9)
[    27.679] (II) No input driver specified, ignoring this device.
[    27.679] (II) This device may have been added with another device file.
[    27.680] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event10)
[    27.680] (II) No input driver specified, ignoring this device.
[    27.680] (II) This device may have been added with another device file.
[    27.681] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event11)
[    27.681] (II) No input driver specified, ignoring this device.
[    27.681] (II) This device may have been added with another device file.
[    27.682] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    27.682] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    27.682] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    27.682] (**) AT Translated Set 2 keyboard: always reports core events
[    27.683] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[    27.683] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    27.683] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    27.683] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    27.683] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    27.683] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[    27.683] (**) Option "xkb_rules" "evdev"
[    27.683] (**) Option "xkb_model" "pc105"
[    27.683] (**) Option "xkb_layout" "pl"
[    27.684] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event7)
[    27.684] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[    27.685] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[    27.685] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[    27.685] (II) LoadModule: "synaptics"
[    27.685] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    27.716] (II) Module synaptics: vendor="X.Org Foundation"
[    27.716]     compiled for 1.12.4, module version = 1.6.2
[    27.716]     Module class: X.Org XInput Driver
[    27.716]     ABI class: X.Org XInput driver, version 16.0
[    27.716] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[    27.716] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    27.716] (**) Option "Device" "/dev/input/event7"
[    27.816] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[    27.816] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5772
[    27.816] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 5086
[    27.816] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[    27.816] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[    27.816] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[    27.816] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[    27.816] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    27.816] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    27.820] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event7"
[    27.820] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 11)
[    27.820] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[    27.820] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[    27.820] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.035
[    27.821] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[    27.821] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[    27.821] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    27.821] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    27.821] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    27.821] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[    27.821] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[    27.822] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[    27.822] (II) No input driver specified, ignoring this device.
[    27.822] (II) This device may have been added with another device file.
[    27.823] (II) config/udev: Adding input device ACPI Virtual Keyboard Device (/dev/input/event13)
[    27.823] (**) ACPI Virtual Keyboard Device: Applying InputClass "evdev keyboard catchall"
[    27.823] (II) Using input driver 'evdev' for 'ACPI Virtual Keyboard Device'
[    27.823] (**) ACPI Virtual Keyboard Device: always reports core events
[    27.823] (**) evdev: ACPI Virtual Keyboard Device: Device: "/dev/input/event13"
[    27.823] (--) evdev: ACPI Virtual Keyboard Device: Vendor 0 Product 0
[    27.823] (--) evdev: ACPI Virtual Keyboard Device: Found keys
[    27.823] (II) evdev: ACPI Virtual Keyboard Device: Configuring as keyboard
[    27.823] (**) Option "config_info" "udev:/sys/devices/virtual/input/input13/event13"
[    27.823] (II) XINPUT: Adding extended input device "ACPI Virtual Keyboard Device" (type: KEYBOARD, id 12)
[    27.823] (**) Option "xkb_rules" "evdev"
[    27.823] (**) Option "xkb_model" "pc105"
[    27.823] (**) Option "xkb_layout" "pl"
[    27.824] (II) config/udev: Adding input device Toshiba input device (/dev/input/event6)
[    27.824] (**) Toshiba input device: Applying InputClass "evdev keyboard catchall"
[    27.824] (II) Using input driver 'evdev' for 'Toshiba input device'
[    27.824] (**) Toshiba input device: always reports core events
[    27.824] (**) evdev: Toshiba input device: Device: "/dev/input/event6"
[    27.824] (--) evdev: Toshiba input device: Vendor 0 Product 0
[    27.824] (--) evdev: Toshiba input device: Found keys
[    27.824] (II) evdev: Toshiba input device: Configuring as keyboard
[    27.824] (**) Option "config_info" "udev:/sys/devices/virtual/input/input6/event6"
[    27.824] (II) XINPUT: Adding extended input device "Toshiba input device" (type: KEYBOARD, id 13)
[    27.824] (**) Option "xkb_rules" "evdev"
[    27.824] (**) Option "xkb_model" "pc105"
[    27.824] (**) Option "xkb_layout" "pl"
[    28.257] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[    28.262] (II) fglrx(0): EDID vendor "LGD", prod id 458
[    28.262] (II) fglrx(0): Printing DDC gathered Modelines:
[    28.262] (II) fglrx(0): Modeline "1600x900"x0.0   97.75  1600 1648 1696 1784  900 902 905 912 -hsync -vsync (54.8 kHz eP)
[    32.062] (II) fglrx(0): EDID vendor "LGD", prod id 458
[    32.063] (II) fglrx(0): Printing DDC gathered Modelines:
[    32.063] (II) fglrx(0): Modeline "1600x900"x0.0   97.75  1600 1648 1696 1784  900 902 905 912 -hsync -vsync (54.8 kHz eP)
[    46.417] (II) fglrx(0): EDID vendor "LGD", prod id 458
[    46.417] (II) fglrx(0): Printing DDC gathered Modelines:
[    46.417] (II) fglrx(0): Modeline "1600x900"x0.0   97.75  1600 1648 1696 1784  900 902 905 912 -hsync -vsync (54.8 kHz eP)
[    51.775] (II) fglrx(0): EDID vendor "LGD", prod id 458
[    51.775] (II) fglrx(0): Printing DDC gathered Modelines:
[    51.775] (II) fglrx(0): Modeline "1600x900"x0.0   97.75  1600 1648 1696 1784  900 902 905 912 -hsync -vsync (54.8 kHz eP)
[    54.453] (II) fglrx(0): EDID vendor "LGD", prod id 458
[    54.454] (II) fglrx(0): Printing DDC gathered Modelines:
[    54.454] (II) fglrx(0): Modeline "1600x900"x0.0   97.75  1600 1648 1696 1784  900 902 905 912 -hsync -vsync (54.8 kHz eP)

Czekam na dalsze propozycje, boję się trochę samemu doinstalowywać paczki z experimental :)

Ostatnio edytowany przez nightmare (2013-03-23 01:24:23)

ArnVaker · 2013-03-23 01:33:23

Jako że się nie znam na Radeonach… Mogę jedynie powiedzieć, że aby wrócić do punktu wyjścia powinno wystarczyć:

Kod:

aptitude purge fglrx~i
rm /etc/X11/xorg.conf

I restart.

nightmare · 2013-03-23 01:44:26

@ArnVaker
Najwyższa pora żeby iść spać. Na razie jeszcze nie kasuje. Poczekam do jutra może ktoś coś wymyśli. ; ) Dzięki za pomoc

ArnVaker · 2013-03-23 01:50:33

Dobranoc. ;)

yossarian · 2013-03-23 09:37:44

[ 24.468] (WW) fglrx(0): * DRI initialization failed *
[ 24.468] (WW) fglrx(0): * kernel module (fglrx.ko) may be missing or incompatible *
[ 24.468] (WW) fglrx(0): * 2D and 3D acceleration disabled *

Wywal wszystko i zainstaluj jeszcze raz sterowniki z repozytorium, a nie żadnych skryptów.
Potrzebujesz jeszcze fglrx-legacy-modules-dkms.
Wklej na forum wszystkie komunikaty z instalacji.

Instalujesz Legacy bo to tak naprawdę podkręcony Radeon HD 4xxx.

nightmare · 2013-03-23 10:30:35

@Yossarin - pisząc ten wątek miałem już wyczyszczone sterowniki fglrx. Więc chyba nie ma potrzeby usuwania. Doinstalowałem fglrx-legacy-modules-dkms. System wstał, Gnome-Shell się odapala. Jeżeli chodzi o desktop, przeglądarkę chodzi w porządku, youtube się nie tnie. Jednak gdy odpaliłem gimpa stworzyłem sobie małą grafikę 200x200 300 dpi odpaliłem narzędzie magic-wand to zawiesiło system.
Tak już musi być czy jest szansa jakoś zwiększyć wydajność mojej karty na Debianie?. Odpaliłem wczoraj distro Fuduntu z pendrive i gimp chodził normalnie.

glxgears po odpaleniu systemu

Kod:

wino@toshiba:~$ glxgears & sleep 30 && pkill glxgears
[1] 4116
5922 frames in 5.0 seconds = 1184.095 FPS
5986 frames in 5.0 seconds = 1196.923 FPS
5919 frames in 5.0 seconds = 1183.550 FPS
6132 frames in 5.0 seconds = 1226.380 FPS
5990 frames in 5.0 seconds = 1197.981 FPS

Kod:

wino@toshiba:~$ fglrxinfo
display: :0  screen: 0
OpenGL vendor string: Advanced Micro Devices, Inc.
OpenGL renderer string: ATI Mobility Radeon HD 4500/5100 Series
OpenGL version string: 3.3.11672 Compatibility Profile Context

Kod:

wino@toshiba:~$ cat /etc/X11/xorg.conf
Section "ServerLayout"
    Identifier     "aticonfig Layout"
    Screen      0  "aticonfig-Screen[0]-0" 0 0
EndSection

Section "Module"
EndSection

Section "Monitor"
    Identifier   "aticonfig-Monitor[0]-0"
    Option        "VendorName" "ATI Proprietary Driver"
    Option        "ModelName" "Generic Autodetecting Monitor"
    Option        "DPMS" "true"
EndSection

Section "Device"
    Identifier  "aticonfig-Device[0]-0"
    Driver      "fglrx"
    BusID       "PCI:1:0:0"
EndSection

Section "Screen"
    Identifier "aticonfig-Screen[0]-0"
    Device     "aticonfig-Device[0]-0"
    Monitor    "aticonfig-Monitor[0]-0"
    DefaultDepth     24
    SubSection "Display"
        Viewport   0 0
        Depth     24
    EndSubSection
EndSection

Kod:

 xorg.0.log
[    23.565] X.Org X Server 1.12.4
Release Date: 2012-08-27
[    23.565] X Protocol Version 11, Revision 0
[    23.565] Build Operating System: Linux 3.2.0-4.drm-amd64 x86_64 Debian
[    23.565] Current Operating System: Linux toshiba 3.2.0-4-amd64 #1 SMP Debian 3.2.39-2 x86_64
[    23.565] Kernel command line: BOOT_IMAGE=/vmlinuz-3.2.0-4-amd64 root=/dev/mapper/debian-root ro quiet
[    23.565] Build Date: 23 February 2013  02:40:45PM
[    23.566] xorg-server 2:1.12.4-5 (Julien Cristau <jcristau@debian.org>) 
[    23.566] Current version of pixman: 0.26.0
[    23.566]     Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[    23.566] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    23.566] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Mar 23 10:19:21 2013
[    23.573] (==) Using config file: "/etc/X11/xorg.conf"
[    23.573] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    23.621] (==) ServerLayout "aticonfig Layout"
[    23.621] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[    23.621] (**) |   |-->Monitor "aticonfig-Monitor[0]-0"
[    23.622] (**) |   |-->Device "aticonfig-Device[0]-0"
[    23.622] (==) Automatically adding devices
[    23.622] (==) Automatically enabling devices
[    23.671] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    23.671]     Entry deleted from font path.
[    23.695] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[    23.695]     Entry deleted from font path.
[    23.695] (==) FontPath set to:
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/100dpi/:unscaled,
    /usr/share/fonts/X11/75dpi/:unscaled,
    /usr/share/fonts/X11/Type1,
    /usr/share/fonts/X11/100dpi,
    /usr/share/fonts/X11/75dpi,
    built-ins
[    23.695] (==) ModulePath set to "/usr/lib/xorg/modules"
[    23.695] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
[    23.695] (II) Loader magic: 0x7f963f767ae0
[    23.695] (II) Module ABI versions:
[    23.695]     X.Org ANSI C Emulation: 0.4
[    23.695]     X.Org Video Driver: 12.1
[    23.695]     X.Org XInput driver : 16.0
[    23.695]     X.Org Server Extension : 6.0
[    23.698] (--) PCI:*(0:1:0:0) 1002:9553:1179:ff82 rev 0, Mem @ 0xc0000000/268435456, 0xd6200000/65536, I/O @ 0x0000a000/256, BIOS @ 0x????????/131072
[    23.699] (II) Open ACPI successful (/var/run/acpid.socket)
[    23.699] (II) "extmod" will be loaded by default.
[    23.699] (II) "dbe" will be loaded by default.
[    23.699] (II) "glx" will be loaded by default.
[    23.699] (II) "record" will be loaded by default.
[    23.699] (II) "dri" will be loaded by default.
[    23.699] (II) "dri2" will be loaded by default.
[    23.699] (II) LoadModule: "extmod"
[    23.751] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    23.771] (II) Module extmod: vendor="X.Org Foundation"
[    23.771]     compiled for 1.12.4, module version = 1.0.0
[    23.771]     Module class: X.Org Server Extension
[    23.771]     ABI class: X.Org Server Extension, version 6.0
[    23.771] (II) Loading extension SELinux
[    23.771] (II) Loading extension MIT-SCREEN-SAVER
[    23.771] (II) Loading extension XFree86-VidModeExtension
[    23.771] (II) Loading extension XFree86-DGA
[    23.771] (II) Loading extension DPMS
[    23.771] (II) Loading extension XVideo
[    23.771] (II) Loading extension XVideo-MotionCompensation
[    23.771] (II) Loading extension X-Resource
[    23.771] (II) LoadModule: "dbe"
[    23.772] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    23.778] (II) Module dbe: vendor="X.Org Foundation"
[    23.779]     compiled for 1.12.4, module version = 1.0.0
[    23.779]     Module class: X.Org Server Extension
[    23.779]     ABI class: X.Org Server Extension, version 6.0
[    23.779] (II) Loading extension DOUBLE-BUFFER
[    23.779] (II) LoadModule: "glx"
[    23.779] (II) Loading /usr/lib/xorg/modules/linux/libglx.so
[    23.804] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[    23.805]     compiled for 6.9.0, module version = 1.0.0
[    23.805] (II) Loading extension GLX
[    23.805] (II) LoadModule: "record"
[    23.806] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    23.822] (II) Module record: vendor="X.Org Foundation"
[    23.822]     compiled for 1.12.4, module version = 1.13.0
[    23.822]     Module class: X.Org Server Extension
[    23.822]     ABI class: X.Org Server Extension, version 6.0
[    23.822] (II) Loading extension RECORD
[    23.822] (II) LoadModule: "dri"
[    23.822] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    23.826] (II) Module dri: vendor="X.Org Foundation"
[    23.826]     compiled for 1.12.4, module version = 1.0.0
[    23.826]     ABI class: X.Org Server Extension, version 6.0
[    23.826] (II) Loading extension XFree86-DRI
[    23.826] (II) LoadModule: "dri2"
[    23.827] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    23.828] (II) Module dri2: vendor="X.Org Foundation"
[    23.828]     compiled for 1.12.4, module version = 1.2.0
[    23.828]     ABI class: X.Org Server Extension, version 6.0
[    23.828] (II) Loading extension DRI2
[    23.828] (II) LoadModule: "fglrx"
[    23.829] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[    24.085] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
[    24.085]     compiled for 1.4.99.906, module version = 8.97.2
[    24.085]     Module class: X.Org Video Driver
[    24.087] (II) Loading sub module "fglrxdrm"
[    24.087] (II) LoadModule: "fglrxdrm"
[    24.087] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[    24.105] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[    24.105]     compiled for 1.4.99.906, module version = 8.97.2
[    24.106] (II) ATI Proprietary Linux Driver Version Identifier:8.97.2
[    24.106] (II) ATI Proprietary Linux Driver Release Identifier: 8.97.100.7                           
[    24.106] (II) ATI Proprietary Linux Driver Build Date: Nov 16 2012 14:45:00
[    24.106] (++) using VT number 7

[    24.118] (WW) Falling back to old probe method for fglrx
[    24.167] (II) Loading PCS database from /etc/ati/amdpcsdb
[    24.171] (--) Chipset Supported AMD Graphics Processor (0x9553) found
[    24.182] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[    24.183] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[    24.184] (II) AMD Video driver is signed
[    24.184] (II) fglrx(0): pEnt->device->identifier=0x7f963feaa700
[    24.185] (II) fglrx(0): === [xdl_xs112_atiddxPreInit] === begin
[    24.185] (II) Loading sub module "vgahw"
[    24.185] (II) LoadModule: "vgahw"
[    24.186] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[    24.201] (II) Module vgahw: vendor="X.Org Foundation"
[    24.201]     compiled for 1.12.4, module version = 0.1.0
[    24.201]     ABI class: X.Org Video Driver, version 12.1
[    24.201] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[    24.201] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[    24.201] (==) fglrx(0): Default visual is TrueColor
[    24.201] (**) fglrx(0): Option "DPMS" "true"
[    24.201] (==) fglrx(0): RGB weight 888
[    24.201] (II) fglrx(0): Using 8 bits per RGB 
[    24.201] (==) fglrx(0): Buffer Tiling is ON
[    24.202] (II) Loading sub module "fglrxdrm"
[    24.202] (II) LoadModule: "fglrxdrm"
[    24.202] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[    24.202] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[    24.202]     compiled for 1.4.99.906, module version = 8.97.2
[    24.206] ukiDynamicMajor: found major device number 252
[    24.206] ukiDynamicMajor: found major device number 252
[    24.206] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[    24.206] ukiOpenDevice: node name is /dev/ati/card0
[    24.206] ukiOpenDevice: open result is 12, (OK)
[    24.206] ukiOpenByBusid: ukiOpenMinor returns 12
[    24.206] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[    24.207] (**) fglrx(0): NoAccel = NO
[    24.207] (**) fglrx(0): ATI 2D Acceleration Architecture enabled
[    24.207] (--) fglrx(0): Chipset: "ATI Mobility Radeon HD 4500/5100 Series" (Chipset = 0x9553)
[    24.207] (--) fglrx(0): (PciSubVendor = 0x1179, PciSubDevice = 0xff82)
[    24.207] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
[    24.207] (--) fglrx(0): Linear framebuffer (phys) at 0xc0000000
[    24.207] (--) fglrx(0): MMIO registers at 0xd6200000
[    24.207] (--) fglrx(0): I/O port at 0x0000a000
[    24.207] (==) fglrx(0): ROM-BIOS at 0x000c0000
[    24.244] (II) fglrx(0): Battery is used
[    24.263] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[    24.448] (II) Loading sub module "vbe"
[    24.448] (II) LoadModule: "vbe"
[    24.448] (II) Loading /usr/lib/xorg/modules/libvbe.so
[    24.462] (II) Module vbe: vendor="X.Org Foundation"
[    24.462]     compiled for 1.12.4, module version = 1.1.0
[    24.462]     ABI class: X.Org Video Driver, version 12.1
[    24.464] (II) fglrx(0): VESA BIOS detected
[    24.464] (II) fglrx(0): VESA VBE Version 3.0
[    24.464] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[    24.464] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
[    24.464] (II) fglrx(0): VESA VBE OEM Software Rev: 11.22
[    24.464] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc. 
[    24.464] (II) fglrx(0): VESA VBE OEM Product: M92
[    24.464] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[    24.506] (II) fglrx(0): ATI Video BIOS revision 9 or later detected
[    24.506] (--) fglrx(0): Video RAM: 524288 kByte, Type: DDR3
[    24.506] (II) fglrx(0): PCIE card detected
[    24.506] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[    24.506] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[    24.509] (II) fglrx(0): Using adapter: 1:0.0.
[    24.555] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x20000000)
[    25.548] (II) fglrx(0): Interrupt handler installed at IRQ 45.
[    25.548] (II) fglrx(0): RandR 1.2 support is enabled!
[    25.548] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[    25.548] (==) fglrx(0): Center Mode is disabled 
[    25.548] (II) Loading sub module "fb"
[    25.548] (II) LoadModule: "fb"
[    25.548] (II) Loading /usr/lib/xorg/modules/libfb.so
[    25.590] (II) Module fb: vendor="X.Org Foundation"
[    25.590]     compiled for 1.12.4, module version = 1.0.0
[    25.590]     ABI class: X.Org ANSI C Emulation, version 0.4
[    25.590] (II) Loading sub module "ddc"
[    25.590] (II) LoadModule: "ddc"
[    25.590] (II) Module "ddc" already built-in
[    26.102] (II) fglrx(0): Finished Initialize PPLIB!
[    26.129] (II) fglrx(0): Output LVDS using monitor section aticonfig-Monitor[0]-0
[    26.129] (II) fglrx(0): Output DFP1 has no monitor section
[    26.129] (II) fglrx(0): Output DFP2 has no monitor section
[    26.129] (II) fglrx(0): Output CRT1 has no monitor section
[    26.129] (II) Loading sub module "ddc"
[    26.129] (II) LoadModule: "ddc"
[    26.129] (II) Module "ddc" already built-in
[    26.129] (II) fglrx(0): Connected Display0: LVDS
[    26.129] (II) fglrx(0): Display0 EDID data ---------------------------
[    26.129] (II) fglrx(0): Manufacturer: LGD  Model: 1ca  Serial#: 0
[    26.129] (II) fglrx(0): Year: 2008  Week: 0
[    26.129] (II) fglrx(0): EDID Version: 1.3
[    26.129] (II) fglrx(0): Digital Display Input
[    26.129] (II) fglrx(0): Max Image Size [cm]: horiz.: 38  vert.: 21
[    26.129] (II) fglrx(0): Gamma: 2.20
[    26.129] (II) fglrx(0): No DPMS capabilities specified
[    26.129] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    26.129] (II) fglrx(0): First detailed timing is preferred mode
[    26.129] (II) fglrx(0): redX: 0.615 redY: 0.346   greenX: 0.314 greenY: 0.602
[    26.129] (II) fglrx(0): blueX: 0.151 blueY: 0.109   whiteX: 0.312 whiteY: 0.328
[    26.129] (II) fglrx(0): Manufacturer's mask: 0
[    26.129] (II) fglrx(0): Supported detailed timing:
[    26.129] (II) fglrx(0): clock: 97.8 MHz   Image Size:  382 x 215 mm
[    26.129] (II) fglrx(0): h_active: 1600  h_sync: 1648  h_sync_end 1696 h_blank_end 1784 h_border: 0
[    26.129] (II) fglrx(0): v_active: 900  v_sync: 902  v_sync_end 905 v_blanking: 912 v_border: 0
[    26.130] (II) fglrx(0):  
[    26.130] (II) fglrx(0):  LP173WD1-TLA1
[    26.130] (II) fglrx(0): EDID (in hex):
[    26.130] (II) fglrx(0):     00ffffffffffff0030e4ca0100000000
[    26.130] (II) fglrx(0):     00120103802615780aa8c09d58509a26
[    26.130] (II) fglrx(0):     1c505400000001010101010101010101
[    26.130] (II) fglrx(0):     0101010101012f2640b860840c303030
[    26.130] (II) fglrx(0):     23007ed7100000190000000000000000
[    26.130] (II) fglrx(0):     00000000000000000000000000fe0000
[    26.130] (II) fglrx(0):     00004c47446973706c61790a000000fe
[    26.130] (II) fglrx(0):     004c503137335744312d544c41310078
[    26.130] (II) fglrx(0): End of Display0 EDID data --------------------
[    26.243] (II) fglrx(0): EDID for output LVDS
[    26.243] (II) fglrx(0): Manufacturer: LGD  Model: 1ca  Serial#: 0
[    26.243] (II) fglrx(0): Year: 2008  Week: 0
[    26.243] (II) fglrx(0): EDID Version: 1.3
[    26.243] (II) fglrx(0): Digital Display Input
[    26.243] (II) fglrx(0): Max Image Size [cm]: horiz.: 38  vert.: 21
[    26.243] (II) fglrx(0): Gamma: 2.20
[    26.243] (II) fglrx(0): No DPMS capabilities specified
[    26.243] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    26.244] (II) fglrx(0): First detailed timing is preferred mode
[    26.244] (II) fglrx(0): redX: 0.615 redY: 0.346   greenX: 0.314 greenY: 0.602
[    26.244] (II) fglrx(0): blueX: 0.151 blueY: 0.109   whiteX: 0.312 whiteY: 0.328
[    26.244] (II) fglrx(0): Manufacturer's mask: 0
[    26.244] (II) fglrx(0): Supported detailed timing:
[    26.244] (II) fglrx(0): clock: 97.8 MHz   Image Size:  382 x 215 mm
[    26.244] (II) fglrx(0): h_active: 1600  h_sync: 1648  h_sync_end 1696 h_blank_end 1784 h_border: 0
[    26.244] (II) fglrx(0): v_active: 900  v_sync: 902  v_sync_end 905 v_blanking: 912 v_border: 0
[    26.244] (II) fglrx(0):  
[    26.244] (II) fglrx(0):  LP173WD1-TLA1
[    26.244] (II) fglrx(0): EDID (in hex):
[    26.244] (II) fglrx(0):     00ffffffffffff0030e4ca0100000000
[    26.244] (II) fglrx(0):     00120103802615780aa8c09d58509a26
[    26.244] (II) fglrx(0):     1c505400000001010101010101010101
[    26.244] (II) fglrx(0):     0101010101012f2640b860840c303030
[    26.244] (II) fglrx(0):     23007ed7100000190000000000000000
[    26.244] (II) fglrx(0):     00000000000000000000000000fe0000
[    26.244] (II) fglrx(0):     00004c47446973706c61790a000000fe
[    26.244] (II) fglrx(0):     004c503137335744312d544c41310078
[    26.245] (II) fglrx(0): EDID vendor "LGD", prod id 458
[    26.245] (II) fglrx(0): Printing DDC gathered Modelines:
[    26.245] (II) fglrx(0): Modeline "1600x900"x0.0   97.75  1600 1648 1696 1784  900 902 905 912 -hsync -vsync (54.8 kHz eP)
[    26.245] (II) fglrx(0): Printing probed modes for output LVDS
[    26.245] (II) fglrx(0): Modeline "1600x900"x60.0   97.75  1600 1648 1696 1784  900 902 905 912 +hsync +vsync (54.8 kHz)
[    26.245] (II) fglrx(0): Modeline "1440x900"x60.0   97.75  1440 1648 1696 1784  900 902 905 912 +hsync +vsync (54.8 kHz)
[    26.245] (II) fglrx(0): Modeline "1280x800"x60.0   97.75  1280 1648 1696 1784  800 902 905 912 +hsync +vsync (54.8 kHz)
[    26.245] (II) fglrx(0): Modeline "1152x864"x60.0   97.75  1152 1648 1696 1784  864 902 905 912 +hsync +vsync (54.8 kHz)
[    26.245] (II) fglrx(0): Modeline "1280x768"x60.0   97.75  1280 1648 1696 1784  768 902 905 912 +hsync +vsync (54.8 kHz)
[    26.245] (II) fglrx(0): Modeline "1280x720"x60.0   97.75  1280 1648 1696 1784  720 902 905 912 +hsync +vsync (54.8 kHz)
[    26.245] (II) fglrx(0): Modeline "1024x768"x60.0   97.75  1024 1648 1696 1784  768 902 905 912 +hsync +vsync (54.8 kHz)
[    26.245] (II) fglrx(0): Modeline "1024x600"x60.0   97.75  1024 1648 1696 1784  600 902 905 912 +hsync +vsync (54.8 kHz)
[    26.245] (II) fglrx(0): Modeline "800x600"x60.0   97.75  800 1648 1696 1784  600 902 905 912 +hsync +vsync (54.8 kHz)
[    26.246] (II) fglrx(0): Modeline "800x480"x60.0   97.75  800 1648 1696 1784  480 902 905 912 +hsync +vsync (54.8 kHz)
[    26.246] (II) fglrx(0): Modeline "720x480"x60.0   97.75  720 1648 1696 1784  480 902 905 912 +hsync +vsync (54.8 kHz)
[    26.246] (II) fglrx(0): Modeline "640x480"x60.0   97.75  640 1648 1696 1784  480 902 905 912 +hsync +vsync (54.8 kHz)
[    26.246] (II) fglrx(0): EDID for output DFP1
[    26.246] (II) fglrx(0): EDID for output DFP2
[    26.246] (II) fglrx(0): EDID for output CRT1
[    26.246] (II) fglrx(0): Output LVDS connected
[    26.246] (II) fglrx(0): Output DFP1 disconnected
[    26.246] (II) fglrx(0): Output DFP2 disconnected
[    26.246] (II) fglrx(0): Output CRT1 disconnected
[    26.246] (II) fglrx(0): Using exact sizes for initial modes
[    26.246] (II) fglrx(0): Output LVDS using initial mode 1600x900
[    26.246] (II) fglrx(0): Display dimensions: (380, 210) mm
[    26.246] (II) fglrx(0): DPI set to (106, 108)
[    26.246] (II) fglrx(0): Adapter ATI Mobility Radeon HD 4500/5100 Series has 2 configurable heads and 1 displays connected.
[    26.247] (==) fglrx(0):  PseudoColor visuals disabled
[    26.247] (II) Loading sub module "ramdac"
[    26.247] (II) LoadModule: "ramdac"
[    26.247] (II) Module "ramdac" already built-in
[    26.247] (==) fglrx(0): NoDRI = NO
[    26.247] (==) fglrx(0): Capabilities: 0x00000000
[    26.247] (==) fglrx(0): CapabilitiesEx: 0x00000000
[    26.247] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[    26.247] (==) fglrx(0): UseFastTLS=0
[    26.247] (==) fglrx(0): BlockSignalsOnLock=1
[    26.247] (--) Depth 24 pixmap format is 32 bpp
[    26.248] (II) Loading extension ATIFGLRXDRI
[    26.248] (II) fglrx(0): doing swlDriScreenInit
[    26.248] (II) fglrx(0): swlDriScreenInit for fglrx driver
[    26.248] ukiDynamicMajor: found major device number 252
[    26.248] ukiDynamicMajor: found major device number 252
[    26.248] ukiDynamicMajor: found major device number 252
[    26.248] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[    26.248] ukiOpenDevice: node name is /dev/ati/card0
[    26.249] ukiOpenDevice: open result is 13, (OK)
[    26.249] ukiOpenByBusid: ukiOpenMinor returns 13
[    26.249] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[    26.249] (II) fglrx(0): [uki] DRM interface version 1.0
[    26.249] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
[    26.249] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[    26.249] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7f963f182000
[    26.249] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[    26.249] (II) fglrx(0): [uki] added 1 reserved context for kernel
[    26.249] (II) fglrx(0): swlDriScreenInit done
[    26.249] (II) fglrx(0): Kernel Module Version Information:
[    26.249] (II) fglrx(0):     Name: fglrx
[    26.250] (II) fglrx(0):     Version: 8.97.2
[    26.250] (II) fglrx(0):     Date: Nov 16 2012
[    26.250] (II) fglrx(0):     Desc: ATI FireGL DRM kernel module
[    26.250] (II) fglrx(0): Kernel Module version matches driver.
[    26.250] (II) fglrx(0): Kernel Module Build Time Information:
[    26.250] (II) fglrx(0):     Build-Kernel UTS_RELEASE:        3.2.0-4-amd64
[    26.250] (II) fglrx(0):     Build-Kernel MODVERSIONS:        no
[    26.250] (II) fglrx(0):     Build-Kernel __SMP__:            no
[    26.250] (II) fglrx(0):     Build-Kernel PAGE_SIZE:          0x1000
[    26.250] (II) fglrx(0): [uki] register handle = 0x00004000
[    26.304] (II) fglrx(0): DRI initialization successfull
[    26.320] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x01004000
[    26.336] (==) fglrx(0): Backing store disabled
[    26.336] (II) Loading extension FGLRXEXTENSION
[    26.336] (**) fglrx(0): DPMS enabled
[    26.337] (II) fglrx(0): Initialized in-driver Xinerama extension
[    26.337] (**) fglrx(0): Textured Video is enabled.
[    26.337] (II) LoadModule: "glesx"
[    26.337] (II) Loading /usr/lib/xorg/modules/glesx.so
[    26.485] (II) Module glesx: vendor="X.Org Foundation"
[    26.485]     compiled for 1.4.99.906, module version = 1.0.0
[    26.485] (II) Loading extension GLESX
[    26.485] (II) fglrx(0): GLESX enableFlags = 528
[    26.486] (II) fglrx(0): GLESX is enabled
[    26.486] (II) LoadModule: "amdxmm"
[    26.488] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[    26.506] (II) Module amdxmm: vendor="X.Org Foundation"
[    26.506]     compiled for 1.4.99.906, module version = 2.0.0
[    26.506] (II) Loading extension AMDXVOPL
[    26.506] (II) Loading extension AMDXVBA
[    26.524] (II) fglrx(0): UVD feature is enabled(II) fglrx(0): 
[    26.529] (II) fglrx(0): Enable composite support successfully
[    26.529] (WW) fglrx(0): Option "VendorName" is not used
[    26.529] (WW) fglrx(0): Option "ModelName" is not used
[    26.529] (II) fglrx(0): X context handle = 0x1
[    26.529] (II) fglrx(0): [DRI] installation complete
[    26.529] (==) fglrx(0): Silken mouse enabled
[    26.530] (==) fglrx(0): Using HW cursor of display infrastructure!
[    26.530] (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
[    26.530] (II) fglrx(0): 'LVDS LCD' ConnectorType, abstracted as 'Panel'
[    26.530] (II) fglrx(0): 'eDP LCD' ConnectorType, abstracted as 'Panel'
[    27.681] (--) RandR disabled
[    27.681] (II) Initializing built-in extension Generic Event Extension
[    27.681] (II) Initializing built-in extension SHAPE
[    27.681] (II) Initializing built-in extension MIT-SHM
[    27.681] (II) Initializing built-in extension XInputExtension
[    27.681] (II) Initializing built-in extension XTEST
[    27.681] (II) Initializing built-in extension BIG-REQUESTS
[    27.681] (II) Initializing built-in extension SYNC
[    27.681] (II) Initializing built-in extension XKEYBOARD
[    27.681] (II) Initializing built-in extension XC-MISC
[    27.681] (II) Initializing built-in extension SECURITY
[    27.681] (II) Initializing built-in extension XINERAMA
[    27.681] (II) Initializing built-in extension XFIXES
[    27.681] (II) Initializing built-in extension RENDER
[    27.681] (II) Initializing built-in extension RANDR
[    27.681] (II) Initializing built-in extension COMPOSITE
[    27.681] (II) Initializing built-in extension DAMAGE
[    27.681] (II) SELinux: Disabled on system
[    27.685] ukiDynamicMajor: found major device number 252
[    27.685] ukiDynamicMajor: found major device number 252
[    27.685] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[    27.685] ukiOpenDevice: node name is /dev/ati/card0
[    27.685] ukiOpenDevice: open result is 14, (OK)
[    27.685] ukiOpenByBusid: ukiOpenMinor returns 14
[    27.685] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[    28.934] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[    29.061] (II) fglrx(0): Enable the clock gating!
[    29.061] (II) fglrx(0): Setting screen physical size to 423 x 238
[    29.622] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[    29.622] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    29.622] (II) LoadModule: "evdev"
[    29.622] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    29.632] (II) Module evdev: vendor="X.Org Foundation"
[    29.632]     compiled for 1.12.1, module version = 2.7.0
[    29.632]     Module class: X.Org XInput Driver
[    29.632]     ABI class: X.Org XInput driver, version 16.0
[    29.632] (II) Using input driver 'evdev' for 'Power Button'
[    29.632] (**) Power Button: always reports core events
[    29.632] (**) evdev: Power Button: Device: "/dev/input/event4"
[    29.632] (--) evdev: Power Button: Vendor 0 Product 0x1
[    29.632] (--) evdev: Power Button: Found keys
[    29.632] (II) evdev: Power Button: Configuring as keyboard
[    29.632] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[    29.632] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    29.632] (**) Option "xkb_rules" "evdev"
[    29.632] (**) Option "xkb_model" "pc105"
[    29.632] (**) Option "xkb_layout" "pl"
[    29.711] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[    29.711] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    29.711] (II) Using input driver 'evdev' for 'Video Bus'
[    29.711] (**) Video Bus: always reports core events
[    29.711] (**) evdev: Video Bus: Device: "/dev/input/event5"
[    29.711] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    29.711] (--) evdev: Video Bus: Found keys
[    29.711] (II) evdev: Video Bus: Configuring as keyboard
[    29.711] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input5/event5"
[    29.711] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    29.711] (**) Option "xkb_rules" "evdev"
[    29.712] (**) Option "xkb_model" "pc105"
[    29.712] (**) Option "xkb_layout" "pl"
[    29.714] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    29.714] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    29.714] (II) Using input driver 'evdev' for 'Power Button'
[    29.714] (**) Power Button: always reports core events
[    29.714] (**) evdev: Power Button: Device: "/dev/input/event3"
[    29.714] (--) evdev: Power Button: Vendor 0 Product 0x1
[    29.714] (--) evdev: Power Button: Found keys
[    29.714] (II) evdev: Power Button: Configuring as keyboard
[    29.714] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event3"
[    29.714] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[    29.714] (**) Option "xkb_rules" "evdev"
[    29.714] (**) Option "xkb_model" "pc105"
[    29.714] (**) Option "xkb_layout" "pl"
[    29.716] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[    29.716] (II) No input driver specified, ignoring this device.
[    29.716] (II) This device may have been added with another device file.
[    29.717] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event12)
[    29.717] (II) No input driver specified, ignoring this device.
[    29.718] (II) This device may have been added with another device file.
[    29.719] (II) config/udev: Adding input device USB2.0 UVC WebCam (/dev/input/event9)
[    29.719] (**) USB2.0 UVC WebCam: Applying InputClass "evdev keyboard catchall"
[    29.719] (II) Using input driver 'evdev' for 'USB2.0 UVC WebCam'
[    29.719] (**) USB2.0 UVC WebCam: always reports core events
[    29.719] (**) evdev: USB2.0 UVC WebCam: Device: "/dev/input/event9"
[    29.719] (--) evdev: USB2.0 UVC WebCam: Vendor 0x4f2 Product 0xb128
[    29.719] (--) evdev: USB2.0 UVC WebCam: Found keys
[    29.719] (II) evdev: USB2.0 UVC WebCam: Configuring as keyboard
[    29.719] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input9/event9"
[    29.719] (II) XINPUT: Adding extended input device "USB2.0 UVC WebCam" (type: KEYBOARD, id 9)
[    29.719] (**) Option "xkb_rules" "evdev"
[    29.719] (**) Option "xkb_model" "pc105"
[    29.719] (**) Option "xkb_layout" "pl"
[    29.721] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8)
[    29.721] (II) No input driver specified, ignoring this device.
[    29.721] (II) This device may have been added with another device file.
[    29.721] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event10)
[    29.721] (II) No input driver specified, ignoring this device.
[    29.721] (II) This device may have been added with another device file.
[    29.722] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event11)
[    29.722] (II) No input driver specified, ignoring this device.
[    29.722] (II) This device may have been added with another device file.
[    29.722] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    29.722] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    29.722] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    29.722] (**) AT Translated Set 2 keyboard: always reports core events
[    29.722] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[    29.722] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    29.722] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    29.723] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    29.723] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    29.723] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[    29.723] (**) Option "xkb_rules" "evdev"
[    29.723] (**) Option "xkb_model" "pc105"
[    29.723] (**) Option "xkb_layout" "pl"
[    29.724] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event7)
[    29.724] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[    29.724] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[    29.724] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[    29.724] (II) LoadModule: "synaptics"
[    29.724] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    29.768] (II) Module synaptics: vendor="X.Org Foundation"
[    29.768]     compiled for 1.12.4, module version = 1.6.2
[    29.768]     Module class: X.Org XInput Driver
[    29.768]     ABI class: X.Org XInput driver, version 16.0
[    29.768] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[    29.768] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    29.768] (**) Option "Device" "/dev/input/event7"
[    29.936] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[    29.936] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5772
[    29.936] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 5086
[    29.936] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[    29.936] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[    29.936] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[    29.936] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[    29.936] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    29.936] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    29.980] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event7"
[    29.980] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 11)
[    29.980] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[    29.980] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[    29.980] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.035
[    29.981] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[    29.981] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[    29.981] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    29.981] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    29.981] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    29.982] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[    29.982] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[    29.983] (II) config/udev: Adding input device PC Speaker (/dev/input/event1)
[    29.983] (II) No input driver specified, ignoring this device.
[    29.983] (II) This device may have been added with another device file.
[    29.984] (II) config/udev: Adding input device ACPI Virtual Keyboard Device (/dev/input/event13)
[    29.984] (**) ACPI Virtual Keyboard Device: Applying InputClass "evdev keyboard catchall"
[    29.984] (II) Using input driver 'evdev' for 'ACPI Virtual Keyboard Device'
[    29.984] (**) ACPI Virtual Keyboard Device: always reports core events
[    29.985] (**) evdev: ACPI Virtual Keyboard Device: Device: "/dev/input/event13"
[    29.985] (--) evdev: ACPI Virtual Keyboard Device: Vendor 0 Product 0
[    29.985] (--) evdev: ACPI Virtual Keyboard Device: Found keys
[    29.985] (II) evdev: ACPI Virtual Keyboard Device: Configuring as keyboard
[    29.985] (**) Option "config_info" "udev:/sys/devices/virtual/input/input13/event13"
[    29.985] (II) XINPUT: Adding extended input device "ACPI Virtual Keyboard Device" (type: KEYBOARD, id 12)
[    29.985] (**) Option "xkb_rules" "evdev"
[    29.985] (**) Option "xkb_model" "pc105"
[    29.985] (**) Option "xkb_layout" "pl"
[    29.986] (II) config/udev: Adding input device Toshiba input device (/dev/input/event6)
[    29.986] (**) Toshiba input device: Applying InputClass "evdev keyboard catchall"
[    29.986] (II) Using input driver 'evdev' for 'Toshiba input device'
[    29.986] (**) Toshiba input device: always reports core events
[    29.986] (**) evdev: Toshiba input device: Device: "/dev/input/event6"
[    29.986] (--) evdev: Toshiba input device: Vendor 0 Product 0
[    29.986] (--) evdev: Toshiba input device: Found keys
[    29.986] (II) evdev: Toshiba input device: Configuring as keyboard
[    29.986] (**) Option "config_info" "udev:/sys/devices/virtual/input/input6/event6"
[    29.986] (II) XINPUT: Adding extended input device "Toshiba input device" (type: KEYBOARD, id 13)
[    29.986] (**) Option "xkb_rules" "evdev"
[    29.986] (**) Option "xkb_model" "pc105"
[    29.986] (**) Option "xkb_layout" "pl"
[    30.420] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[    30.425] (II) fglrx(0): EDID vendor "LGD", prod id 458
[    30.425] (II) fglrx(0): Printing DDC gathered Modelines:
[    30.425] (II) fglrx(0): Modeline "1600x900"x0.0   97.75  1600 1648 1696 1784  900 902 905 912 -hsync -vsync (54.8 kHz eP)
[    33.891] (II) fglrx(0): EDID vendor "LGD", prod id 458
[    33.892] (II) fglrx(0): Printing DDC gathered Modelines:
[    33.892] (II) fglrx(0): Modeline "1600x900"x0.0   97.75  1600 1648 1696 1784  900 902 905 912 -hsync -vsync (54.8 kHz eP)
[    49.274] (II) fglrx(0): EDID vendor "LGD", prod id 458
[    49.274] (II) fglrx(0): Printing DDC gathered Modelines:
[    49.274] (II) fglrx(0): Modeline "1600x900"x0.0   97.75  1600 1648 1696 1784  900 902 905 912 -hsync -vsync (54.8 kHz eP)
[    54.004] (II) fglrx(0): EDID vendor "LGD", prod id 458
[    54.004] (II) fglrx(0): Printing DDC gathered Modelines:
[    54.004] (II) fglrx(0): Modeline "1600x900"x0.0   97.75  1600 1648 1696 1784  900 902 905 912 -hsync -vsync (54.8 kHz eP)
[    56.274] (II) fglrx(0): EDID vendor "LGD", prod id 458
[    56.274] (II) fglrx(0): Printing DDC gathered Modelines:
[    56.274] (II) fglrx(0): Modeline "1600x900"x0.0   97.75  1600 1648 1696 1784  900 902 905 912 -hsync -vsync (54.8 kHz eP)

Ostatnio edytowany przez nightmare (2013-03-23 10:31:05)

yossarian · 2013-03-23 10:49:38

A skąd wiesz, że to jakiś problem ze sterownikami?

Co to za wersja Gimpa?
Masz jakieś nieoficjalne pakiety w systemie?

nightmare · 2013-03-23 11:16:23

Mam tylko oficjalnie pakiety z wyjątkiem fglx-legacy (swieżo zainstalowany system - Debian/wheezy). To nie tylko gimp, ale też inne programy chodzą tak mało płynnie.
Stawiałem na sterownik grafiki, ale może to winna czegoś innego.

Kiedyś do grafiki komputerowej starczał mi PIV 2ghz + stara nvidia. A teraz mam i3 4GB ramu i nie da się pracować pod linuksem, prosta czynność jakąś jest użycie "magic wand" zajmuje ok 10 - 30 sekund, gdzie na starym komputerze zajmowało to sekundę.

Ostatnio edytowany przez nightmare (2013-03-23 11:18:17)

yossarian · 2013-03-23 11:17:32

Zobacz czy w Fluxboksie jest to samo.

nightmare · 2013-03-23 11:21:47

Ok. Zaraz pobiorę fluxa.
Mogę usunąć repo experimental z /etc/apt/sourceslist i sterownikowi fglrx-legacy nic się nie stanie czy jest jakiś inny sposób ustawienia tego repozytorium tylko do aktualizacji fglrx-legacy?
Nie wiem czy dobrze się wyraziłem, ale chodzi o to, że chciałbym móc spokojnie aktualizować system przez aptitude upgrade bez kombinowania, a jak zrobię to teraz to pobierze mi paczki z experimentala.

yossarian · 2013-03-23 11:23:41

Z experimentala nie będą instalowane aktualizacje. Domyślnie ma priorytet 1.
Nawet te zainstalowane sterowniki Legacy same się domyślnie nie aktualizują.

gindek · 2013-03-23 11:28:11

gimp od wersji 2.8 wprowadza wsparcie dla gpu.
Wiec moze sprawdz starasza wersje gimpa, wszystko bedzie na procu, wtedy nie powinno byc takich problemow.

bo z tego co widze to nie da sie go odpalic bez wsparcia dla gpu, ani nie da sie go skompilowac bez tego :-).

yossarian · 2013-03-23 11:35:08

I czy jest jakaś różnica gdy uruchomisz tak:

Kod:

GEGL_USE_OPENCL=yes gimp

lub tak:

Kod:

GEGL_USE_OPENCL=no gimp

nightmare · 2013-03-23 12:03:22

Rzeczywiście na fluxboxie idzie to ciut lepiej da się jednak pracować. Jednak próbowałem w inkscape wykonać prostą czynność jaką jest stworzenie prostokąta i obracanie go. Nie widać tego dokładnie na screenie ale strasznie jedzie po procku!:
http://i46.tinypic.com/292pshu.jpg

@yossarin
opcje z GEGL_USE próbować na gnome-shell czy fluxbox?

@gindek
jest jakaś możliwość instalacji starszego gimpa z repo?
Mógłbyś podesłać swój xorg.conf?

Ostatnio edytowany przez nightmare (2013-03-23 12:08:06)

yossarian · 2013-03-23 12:15:15

nightmare napisał(-a):
@yossarin
opcje z GEGL_USE próbować na gnome-shell czy fluxbox?

Obojętnie. Sprawdź na obu.

Forum Debian Users Gang

Ogłoszenie

#1 2013-03-22 22:38:22

nightmare - Użytkownik

Radeon HD 5145 - programy graficzne bardzo wolno działają

Kod:

Kod:

Kod:

#2 2013-03-22 22:44:59

yossarian - Szczawiożerca

Re: Radeon HD 5145 - programy graficzne bardzo wolno działają

#3 2013-03-22 22:55:52

nightmare - Użytkownik

Re: Radeon HD 5145 - programy graficzne bardzo wolno działają

#4 2013-03-22 23:25:16

yossarian - Szczawiożerca

Re: Radeon HD 5145 - programy graficzne bardzo wolno działają

#5 2013-03-22 23:52:25

nightmare - Użytkownik

Re: Radeon HD 5145 - programy graficzne bardzo wolno działają

Kod:

Kod:

#6 2013-03-23 00:05:25

ArnVaker - Kapelusznik

Re: Radeon HD 5145 - programy graficzne bardzo wolno działają

Kod:

#7 2013-03-23 00:14:26

nightmare - Użytkownik

Re: Radeon HD 5145 - programy graficzne bardzo wolno działają

Kod:

#8 2013-03-23 00:25:44

ArnVaker - Kapelusznik

Re: Radeon HD 5145 - programy graficzne bardzo wolno działają

#9 2013-03-23 00:36:08

gindek - Zubr, bydle na etacie.

Re: Radeon HD 5145 - programy graficzne bardzo wolno działają

#10 2013-03-23 00:39:08

ArnVaker - Kapelusznik

Re: Radeon HD 5145 - programy graficzne bardzo wolno działają

#11 2013-03-23 00:56:41

nightmare - Użytkownik

Re: Radeon HD 5145 - programy graficzne bardzo wolno działają

Kod:

Kod:

Kod:

#12 2013-03-23 01:33:23

ArnVaker - Kapelusznik

Re: Radeon HD 5145 - programy graficzne bardzo wolno działają

Kod:

#13 2013-03-23 01:44:26

nightmare - Użytkownik

Re: Radeon HD 5145 - programy graficzne bardzo wolno działają

#14 2013-03-23 01:50:33

ArnVaker - Kapelusznik

Re: Radeon HD 5145 - programy graficzne bardzo wolno działają

#15 2013-03-23 09:37:44

yossarian - Szczawiożerca

Re: Radeon HD 5145 - programy graficzne bardzo wolno działają

#16 2013-03-23 10:30:35

nightmare - Użytkownik

Re: Radeon HD 5145 - programy graficzne bardzo wolno działają

Kod:

Kod:

Kod:

Kod:

#17 2013-03-23 10:49:38

yossarian - Szczawiożerca

Re: Radeon HD 5145 - programy graficzne bardzo wolno działają

#18 2013-03-23 11:16:23

nightmare - Użytkownik

Re: Radeon HD 5145 - programy graficzne bardzo wolno działają

#19 2013-03-23 11:17:32

yossarian - Szczawiożerca

Re: Radeon HD 5145 - programy graficzne bardzo wolno działają

#20 2013-03-23 11:21:47

nightmare - Użytkownik

Re: Radeon HD 5145 - programy graficzne bardzo wolno działają

#21 2013-03-23 11:23:41

yossarian - Szczawiożerca

Re: Radeon HD 5145 - programy graficzne bardzo wolno działają