Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!

Ogłoszenie

Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.

Strony: 1

 

#1  2013-03-12 01:16:01

  paw4el - Użytkownik

paw4el
Użytkownik
Zarejestrowany: 2010-07-05

Losowe zawieszanie się systemu

Witam.
Po zainstalowaniu Debiana wheezy na nowym komputerze mam problem z zawieszaniem się systemu. Zdarza się to co losowy czas ( przynajmniej tak wynika z moich obserwacji), gnome zamiera, nie można ruszyć myszką, nie można przełączyć się do konsoli za pomocą np. F1.

Patrzyłem trochę na logi i znalazłem jedynie coś takiego w syslog:

Kod:

Mar 12 00:58:01 debian kernel: [    7.743915] Registered led device: ath9k-phy0
Mar 12 00:58:01 debian kernel: [    7.743925] ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xffffc90009c80000, irq=17
Mar 12 00:58:01 debian kernel: [    7.755732] usb 1-1.3: firmware: agent aborted loading ar3k/AthrBT_0x01020200.dfu (not found?)
Mar 12 00:58:01 debian kernel: [    7.755876] Bluetooth: Loading patch file failed
Mar 12 00:58:01 debian kernel: [    7.755924] ath3k: probe of 1-1.3:1.0 failed with error -2
Mar 12 00:58:01 debian kernel: [    7.755959] usbcore: registered new interface driver ath3k
Mar 12 00:58:01 debian kernel: [    8.133993] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
Mar 12 00:58:01 debian kernel: [    8.151512] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0

W Xorg.0.log mam coś takiego:

Kod:

[    25.742] 
X.Org X Server 1.12.4
Release Date: 2012-08-27
[    25.742] X Protocol Version 11, Revision 0
[    25.743] Build Operating System: Linux 3.2.0-4.drm-amd64 x86_64 Debian
[    25.743] Current Operating System: Linux debian 3.2.0-4-amd64 #1 SMP Debian 3.2.35-2 x86_64
[    25.743] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=4b452d72-96e0-49b0-b304-310f7bf1e4a5 ro quiet
[    25.743] Build Date: 23 February 2013  02:40:45PM
[    25.743] xorg-server 2:1.12.4-5 (Julien Cristau <jcristau@debian.org>) 
[    25.743] Current version of pixman: 0.26.0
[    25.743]     Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[    25.743] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    25.743] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Mar 12 00:58:06 2013
[    25.788] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    25.807] (==) No Layout section.  Using the first Screen section.
[    25.807] (==) No screen section available. Using defaults.
[    25.807] (**) |-->Screen "Default Screen Section" (0)
[    25.807] (**) |   |-->Monitor "<default monitor>"
[    25.807] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
[    25.807] (==) Automatically adding devices
[    25.807] (==) Automatically enabling devices
[    25.886] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    25.886]     Entry deleted from font path.
[    25.886] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    25.886]     Entry deleted from font path.
[    25.886] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    25.886]     Entry deleted from font path.
[    25.905] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    25.905]     Entry deleted from font path.
[    25.905] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    25.905]     Entry deleted from font path.
[    25.905] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[    25.905]     Entry deleted from font path.
[    25.905] (==) FontPath set to:
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/Type1,
    built-ins
[    25.905] (==) ModulePath set to "/usr/lib/xorg/modules"
[    25.905] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
[    25.905] (II) Loader magic: 0x7f8084c73ae0
[    25.905] (II) Module ABI versions:
[    25.905]     X.Org ANSI C Emulation: 0.4
[    25.905]     X.Org Video Driver: 12.1
[    25.905]     X.Org XInput driver : 16.0
[    25.905]     X.Org Server Extension : 6.0
[    25.906] (--) PCI:*(0:0:2:0) 8086:0166:17aa:3977 rev 9, Mem @ 0xe0000000/4194304, 0xd0000000/268435456, I/O @ 0x00003000/64
[    25.906] (II) Open ACPI successful (/var/run/acpid.socket)
[    25.906] (II) LoadModule: "extmod"
[    25.931] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    25.980] (II) Module extmod: vendor="X.Org Foundation"
[    25.980]     compiled for 1.12.4, module version = 1.0.0
[    25.980]     Module class: X.Org Server Extension
[    25.980]     ABI class: X.Org Server Extension, version 6.0
[    25.980] (II) Loading extension SELinux
[    25.980] (II) Loading extension MIT-SCREEN-SAVER
[    25.981] (II) Loading extension XFree86-VidModeExtension
[    25.981] (II) Loading extension XFree86-DGA
[    25.981] (II) Loading extension DPMS
[    25.981] (II) Loading extension XVideo
[    25.981] (II) Loading extension XVideo-MotionCompensation
[    25.981] (II) Loading extension X-Resource
[    25.981] (II) LoadModule: "dbe"
[    25.981] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    25.991] (II) Module dbe: vendor="X.Org Foundation"
[    25.992]     compiled for 1.12.4, module version = 1.0.0
[    25.992]     Module class: X.Org Server Extension
[    25.992]     ABI class: X.Org Server Extension, version 6.0
[    25.992] (II) Loading extension DOUBLE-BUFFER
[    25.992] (II) LoadModule: "glx"
[    25.992] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    26.019] (II) Module glx: vendor="X.Org Foundation"
[    26.019]     compiled for 1.12.4, module version = 1.0.0
[    26.019]     ABI class: X.Org Server Extension, version 6.0
[    26.019] (==) AIGLX enabled
[    26.019] (II) Loading extension GLX
[    26.019] (II) LoadModule: "record"
[    26.019] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    26.034] (II) Module record: vendor="X.Org Foundation"
[    26.034]     compiled for 1.12.4, module version = 1.13.0
[    26.034]     Module class: X.Org Server Extension
[    26.034]     ABI class: X.Org Server Extension, version 6.0
[    26.034] (II) Loading extension RECORD
[    26.034] (II) LoadModule: "dri"
[    26.034] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    26.049] (II) Module dri: vendor="X.Org Foundation"
[    26.049]     compiled for 1.12.4, module version = 1.0.0
[    26.049]     ABI class: X.Org Server Extension, version 6.0
[    26.049] (II) Loading extension XFree86-DRI
[    26.049] (II) LoadModule: "dri2"
[    26.049] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    26.050] (II) Module dri2: vendor="X.Org Foundation"
[    26.050]     compiled for 1.12.4, module version = 1.2.0
[    26.050]     ABI class: X.Org Server Extension, version 6.0
[    26.050] (II) Loading extension DRI2
[    26.050] (==) Matched intel as autoconfigured driver 0
[    26.050] (==) Matched vesa as autoconfigured driver 1
[    26.050] (==) Matched fbdev as autoconfigured driver 2
[    26.050] (==) Assigned the driver to the xf86ConfigLayout
[    26.050] (II) LoadModule: "intel"
[    26.076] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    26.159] (II) Module intel: vendor="X.Org Foundation"
[    26.159]     compiled for 1.12.3.902, module version = 2.19.0
[    26.159]     Module class: X.Org Video Driver
[    26.159]     ABI class: X.Org Video Driver, version 12.1
[    26.159] (II) LoadModule: "vesa"
[    26.159] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    26.176] (II) Module vesa: vendor="X.Org Foundation"
[    26.176]     compiled for 1.12.1, module version = 2.3.1
[    26.176]     Module class: X.Org Video Driver
[    26.176]     ABI class: X.Org Video Driver, version 12.0
[    26.176] (II) LoadModule: "fbdev"
[    26.177] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    26.180] (II) Module fbdev: vendor="X.Org Foundation"
[    26.180]     compiled for 1.12.1, module version = 0.4.2
[    26.180]     ABI class: X.Org Video Driver, version 12.0
[    26.180] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
    965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
    4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
    Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
    Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
    Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
    Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
    Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
    Ivybridge Server (GT2)
[    26.181] (II) VESA: driver for VESA chipsets: vesa
[    26.181] (II) FBDEV: driver for framebuffer: fbdev
[    26.181] (++) using VT number 7

[    26.187] (WW) Falling back to old probe method for vesa
[    26.187] (WW) Falling back to old probe method for fbdev
[    26.187] (II) Loading sub module "fbdevhw"
[    26.187] (II) LoadModule: "fbdevhw"
[    26.187] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    26.188] (II) Module fbdevhw: vendor="X.Org Foundation"
[    26.188]     compiled for 1.12.4, module version = 0.0.2
[    26.188]     ABI class: X.Org Video Driver, version 12.1
[    26.188] drmOpenDevice: node name is /dev/dri/card0
[    26.188] drmOpenDevice: open result is 9, (OK)
[    26.188] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[    26.188] drmOpenDevice: node name is /dev/dri/card0
[    26.188] drmOpenDevice: open result is 9, (OK)
[    26.188] drmOpenByBusid: drmOpenMinor returns 9
[    26.188] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[    26.188] (II) intel(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
[    26.188] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    26.188] (==) intel(0): RGB weight 888
[    26.188] (==) intel(0): Default visual is TrueColor
[    26.188] (II) intel(0): Integrated Graphics Chipset: Intel(R) Ivybridge Mobile (GT2)
[    26.188] (--) intel(0): Chipset: "Ivybridge Mobile (GT2)"
[    26.188] (**) intel(0): Relaxed fencing enabled
[    26.188] (**) intel(0): Wait on SwapBuffers? enabled
[    26.188] (**) intel(0): Triple buffering? enabled
[    26.188] (**) intel(0): Framebuffer tiled
[    26.188] (**) intel(0): Pixmaps tiled
[    26.188] (**) intel(0): 3D buffers tiled
[    26.189] (**) intel(0): SwapBuffers wait enabled
[    26.189] (==) intel(0): video overlay key set to 0x101fe
[    26.189] (II) intel(0): Output LVDS1 has no monitor section
[    26.189] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[    26.189] (II) intel(0): Output VGA1 has no monitor section
[    26.211] (II) intel(0): Output HDMI1 has no monitor section
[    26.260] (II) intel(0): Output DP1 has no monitor section
[    26.260] (II) intel(0): EDID for output LVDS1
[    26.260] (II) intel(0): Manufacturer: LGD  Model: 33a  Serial#: 0
[    26.260] (II) intel(0): Year: 2011  Week: 0
[    26.260] (II) intel(0): EDID Version: 1.3
[    26.260] (II) intel(0): Digital Display Input
[    26.260] (II) intel(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[    26.260] (II) intel(0): Gamma: 2.20
[    26.260] (II) intel(0): No DPMS capabilities specified
[    26.260] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    26.260] (II) intel(0): First detailed timing is preferred mode
[    26.260] (II) intel(0): redX: 0.618 redY: 0.369   greenX: 0.355 greenY: 0.603
[    26.260] (II) intel(0): blueX: 0.151 blueY: 0.103   whiteX: 0.313 whiteY: 0.329
[    26.260] (II) intel(0): Manufacturer's mask: 0
[    26.260] (II) intel(0): Supported detailed timing:
[    26.260] (II) intel(0): clock: 70.0 MHz   Image Size:  344 x 194 mm
[    26.261] (II) intel(0): h_active: 1366  h_sync: 1402  h_sync_end 1450 h_blank_end 1492 h_border: 0
[    26.261] (II) intel(0): v_active: 768  v_sync: 771  v_sync_end 776 v_blanking: 782 v_border: 0
[    26.261] (II) intel(0):  LG Display
[    26.261] (II) intel(0):  LP156WH4-TLN1
[    26.261] (II) intel(0): EDID (in hex):
[    26.261] (II) intel(0):     00ffffffffffff0030e43a0300000000
[    26.261] (II) intel(0):     00150103802213780a61d59e5e5b9a26
[    26.261] (II) intel(0):     1a505400000001010101010101010101
[    26.261] (II) intel(0):     010101010101581b567e50000e302430
[    26.261] (II) intel(0):     350058c2100000190000000000000000
[    26.261] (II) intel(0):     00000000000000000000000000fe004c
[    26.261] (II) intel(0):     4720446973706c61790a2020000000fe
[    26.261] (II) intel(0):     004c503135365748342d544c4e310083
[    26.261] (II) intel(0): EDID vendor "LGD", prod id 826
[    26.261] (II) intel(0): Printing DDC gathered Modelines:
[    26.261] (II) intel(0): Modeline "1366x768"x0.0   70.00  1366 1402 1450 1492  768 771 776 782 -hsync -vsync (46.9 kHz eP)
[    26.261] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[    26.261] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    26.261] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    26.261] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[    26.261] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[    26.261] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[    26.261] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[    26.261] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[    26.262] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[    26.262] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[    26.262] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[    26.262] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[    26.262] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[    26.262] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[    26.262] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[    26.262] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[    26.262] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[    26.262] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[    26.262] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[    26.262] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[    26.262] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[    26.262] (II) intel(0): Printing probed modes for output LVDS1
[    26.262] (II) intel(0): Modeline "1366x768"x60.0   70.00  1366 1402 1450 1492  768 771 776 782 -hsync -vsync (46.9 kHz eP)
[    26.262] (II) intel(0): Modeline "1360x768"x59.8   84.75  1360 1432 1568 1776  768 771 781 798 -hsync +vsync (47.7 kHz d)
[    26.262] (II) intel(0): Modeline "1360x768"x60.0   72.00  1360 1408 1440 1520  768 771 781 790 +hsync -vsync (47.4 kHz d)
[    26.262] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[    26.262] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[    26.262] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[    26.262] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[    26.262] (II) intel(0): EDID for output VGA1
[    26.285] (II) intel(0): EDID for output HDMI1
[    26.332] (II) intel(0): EDID for output DP1
[    26.332] (II) intel(0): Output LVDS1 connected
[    26.332] (II) intel(0): Output VGA1 disconnected
[    26.332] (II) intel(0): Output HDMI1 disconnected
[    26.332] (II) intel(0): Output DP1 disconnected
[    26.332] (II) intel(0): Using exact sizes for initial modes
[    26.332] (II) intel(0): Output LVDS1 using initial mode 1366x768
[    26.332] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    26.332] (II) intel(0): Kernel page flipping support detected, enabling
[    26.332] (**) intel(0): Display dimensions: (340, 190) mm
[    26.332] (**) intel(0): DPI set to (102, 102)
[    26.332] (II) Loading sub module "fb"
[    26.332] (II) LoadModule: "fb"
[    26.332] (II) Loading /usr/lib/xorg/modules/libfb.so
[    26.334] (II) Module fb: vendor="X.Org Foundation"
[    26.334]     compiled for 1.12.4, module version = 1.0.0
[    26.334]     ABI class: X.Org ANSI C Emulation, version 0.4
[    26.334] (II) Loading sub module "dri2"
[    26.334] (II) LoadModule: "dri2"
[    26.335] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    26.335] (II) Module dri2: vendor="X.Org Foundation"
[    26.335]     compiled for 1.12.4, module version = 1.2.0
[    26.335]     ABI class: X.Org Server Extension, version 6.0
[    26.335] (II) UnloadModule: "vesa"
[    26.335] (II) Unloading vesa
[    26.335] (II) UnloadModule: "fbdev"
[    26.335] (II) Unloading fbdev
[    26.335] (II) UnloadSubModule: "fbdevhw"
[    26.335] (II) Unloading fbdevhw
[    26.335] (==) Depth 24 pixmap format is 32 bpp
[    26.335] (II) intel(0): [DRI2] Setup complete
[    26.335] (II) intel(0): [DRI2]   DRI driver: i965
[    26.335] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
[    26.339] (II) UXA(0): Driver registered support for the following operations:
[    26.339] (II)         solid
[    26.339] (II)         copy
[    26.339] (II)         composite (RENDER acceleration)
[    26.339] (II)         put_image
[    26.339] (II)         get_image
[    26.339] (==) intel(0): Backing store disabled
[    26.339] (==) intel(0): Silken mouse enabled
[    26.339] (II) intel(0): Initializing HW Cursor
[    26.339] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    26.343] (==) intel(0): DPMS enabled
[    26.343] (==) intel(0): Intel XvMC decoder enabled
[    26.343] (II) intel(0): Set up textured video
[    26.343] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[    26.343] (II) intel(0): direct rendering: DRI2 Enabled
[    26.343] (==) intel(0): hotplug detection: "enabled"
[    26.404] (--) RandR disabled
[    26.404] (II) Initializing built-in extension Generic Event Extension
[    26.404] (II) Initializing built-in extension SHAPE
[    26.404] (II) Initializing built-in extension MIT-SHM
[    26.404] (II) Initializing built-in extension XInputExtension
[    26.404] (II) Initializing built-in extension XTEST
[    26.404] (II) Initializing built-in extension BIG-REQUESTS
[    26.404] (II) Initializing built-in extension SYNC
[    26.404] (II) Initializing built-in extension XKEYBOARD
[    26.404] (II) Initializing built-in extension XC-MISC
[    26.404] (II) Initializing built-in extension SECURITY
[    26.404] (II) Initializing built-in extension XINERAMA
[    26.404] (II) Initializing built-in extension XFIXES
[    26.404] (II) Initializing built-in extension RENDER
[    26.404] (II) Initializing built-in extension RANDR
[    26.404] (II) Initializing built-in extension COMPOSITE
[    26.404] (II) Initializing built-in extension DAMAGE
[    26.404] (II) SELinux: Disabled on system
[    26.589] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    26.589] (II) AIGLX: enabled GLX_INTEL_swap_event
[    26.589] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    26.589] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    26.589] (II) AIGLX: Loaded and initialized i965
[    26.589] (II) GLX: Initialized DRI2 GL provider for screen 0
[    26.589] (II) intel(0): Setting screen physical size to 361 x 203
[    26.860] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[    26.860] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    26.860] (II) LoadModule: "evdev"
[    26.860] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    26.870] (II) Module evdev: vendor="X.Org Foundation"
[    26.870]     compiled for 1.12.1, module version = 2.7.0
[    26.870]     Module class: X.Org XInput Driver
[    26.870]     ABI class: X.Org XInput driver, version 16.0
[    26.870] (II) Using input driver 'evdev' for 'Power Button'
[    26.870] (**) Power Button: always reports core events
[    26.870] (**) evdev: Power Button: Device: "/dev/input/event5"
[    26.870] (--) evdev: Power Button: Vendor 0 Product 0x1
[    26.870] (--) evdev: Power Button: Found keys
[    26.870] (II) evdev: Power Button: Configuring as keyboard
[    26.870] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5"
[    26.870] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    26.870] (**) Option "xkb_rules" "evdev"
[    26.870] (**) Option "xkb_model" "pc105"
[    26.870] (**) Option "xkb_layout" "pl"
[    26.901] (II) config/udev: Adding input device Video Bus (/dev/input/event11)
[    26.902] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    26.902] (II) Using input driver 'evdev' for 'Video Bus'
[    26.902] (**) Video Bus: always reports core events
[    26.902] (**) evdev: Video Bus: Device: "/dev/input/event11"
[    26.902] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    26.902] (--) evdev: Video Bus: Found keys
[    26.902] (II) evdev: Video Bus: Configuring as keyboard
[    26.902] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input11/event11"
[    26.902] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    26.902] (**) Option "xkb_rules" "evdev"
[    26.902] (**) Option "xkb_model" "pc105"
[    26.902] (**) Option "xkb_layout" "pl"
[    26.902] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    26.903] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    26.903] (II) Using input driver 'evdev' for 'Power Button'
[    26.903] (**) Power Button: always reports core events
[    26.903] (**) evdev: Power Button: Device: "/dev/input/event2"
[    26.903] (--) evdev: Power Button: Vendor 0 Product 0x1
[    26.903] (--) evdev: Power Button: Found keys
[    26.903] (II) evdev: Power Button: Configuring as keyboard
[    26.903] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0C:00/input/input2/event2"
[    26.903] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[    26.903] (**) Option "xkb_rules" "evdev"
[    26.903] (**) Option "xkb_model" "pc105"
[    26.903] (**) Option "xkb_layout" "pl"
[    26.903] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[    26.904] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    26.904] (II) Using input driver 'evdev' for 'Sleep Button'
[    26.904] (**) Sleep Button: always reports core events
[    26.904] (**) evdev: Sleep Button: Device: "/dev/input/event3"
[    26.904] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[    26.904] (--) evdev: Sleep Button: Found keys
[    26.904] (II) evdev: Sleep Button: Configuring as keyboard
[    26.904] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0E:00/input/input3/event3"
[    26.904] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[    26.904] (**) Option "xkb_rules" "evdev"
[    26.904] (**) Option "xkb_model" "pc105"
[    26.904] (**) Option "xkb_layout" "pl"
[    26.904] (II) config/udev: Adding input device Lid Switch (/dev/input/event4)
[    26.904] (II) No input driver specified, ignoring this device.
[    26.905] (II) This device may have been added with another device file.
[    26.905] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event9)
[    26.905] (II) No input driver specified, ignoring this device.
[    26.905] (II) This device may have been added with another device file.
[    26.905] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event10)
[    26.905] (II) No input driver specified, ignoring this device.
[    26.905] (II) This device may have been added with another device file.
[    26.906] (II) config/udev: Adding input device Lenovo EasyCamera (/dev/input/event7)
[    26.906] (**) Lenovo EasyCamera: Applying InputClass "evdev keyboard catchall"
[    26.906] (II) Using input driver 'evdev' for 'Lenovo EasyCamera'
[    26.906] (**) Lenovo EasyCamera: always reports core events
[    26.906] (**) evdev: Lenovo EasyCamera: Device: "/dev/input/event7"
[    26.906] (--) evdev: Lenovo EasyCamera: Vendor 0x5986 Product 0x295
[    26.906] (--) evdev: Lenovo EasyCamera: Found keys
[    26.906] (II) evdev: Lenovo EasyCamera: Configuring as keyboard
[    26.906] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/input/input7/event7"
[    26.906] (II) XINPUT: Adding extended input device "Lenovo EasyCamera" (type: KEYBOARD, id 10)
[    26.906] (**) Option "xkb_rules" "evdev"
[    26.906] (**) Option "xkb_model" "pc105"
[    26.906] (**) Option "xkb_layout" "pl"
[    26.907] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    26.907] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    26.907] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    26.907] (**) AT Translated Set 2 keyboard: always reports core events
[    26.907] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[    26.907] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    26.907] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    26.907] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    26.907] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    26.907] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[    26.907] (**) Option "xkb_rules" "evdev"
[    26.907] (**) Option "xkb_model" "pc105"
[    26.907] (**) Option "xkb_layout" "pl"
[    26.908] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event8)
[    26.908] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[    26.908] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[    26.908] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[    26.908] (II) LoadModule: "synaptics"
[    26.908] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    26.933] (II) Module synaptics: vendor="X.Org Foundation"
[    26.933]     compiled for 1.12.4, module version = 1.6.2
[    26.933]     Module class: X.Org XInput Driver
[    26.933]     ABI class: X.Org XInput driver, version 16.0
[    26.933] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[    26.933] (**) ETPS/2 Elantech Touchpad: always reports core events
[    26.933] (**) Option "Device" "/dev/input/event8"
[    27.095] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 2940
[    27.095] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 1260
[    27.095] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[    27.095] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
[    27.095] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left right double triple
[    27.095] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[    27.095] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[    27.095] (**) ETPS/2 Elantech Touchpad: always reports core events
[    27.104] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input8/event8"
[    27.104] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 12)
[    27.104] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[    27.104] (**) synaptics: ETPS/2 Elantech Touchpad: MaxSpeed is now 1.75
[    27.104] (**) synaptics: ETPS/2 Elantech Touchpad: AccelFactor is now 0.063
[    27.104] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[    27.104] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[    27.104] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[    27.104] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[    27.105] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[    27.105] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0)
[    27.105] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[    27.106] (II) config/udev: Adding input device Ideapad extra buttons (/dev/input/event6)
[    27.106] (**) Ideapad extra buttons: Applying InputClass "evdev keyboard catchall"
[    27.106] (II) Using input driver 'evdev' for 'Ideapad extra buttons'
[    27.106] (**) Ideapad extra buttons: always reports core events
[    27.106] (**) evdev: Ideapad extra buttons: Device: "/dev/input/event6"
[    27.106] (--) evdev: Ideapad extra buttons: Vendor 0 Product 0
[    27.106] (--) evdev: Ideapad extra buttons: Found keys
[    27.106] (II) evdev: Ideapad extra buttons: Configuring as keyboard
[    27.106] (**) Option "config_info" "udev:/sys/devices/platform/ideapad/input/input6/event6"
[    27.106] (II) XINPUT: Adding extended input device "Ideapad extra buttons" (type: KEYBOARD, id 13)
[    27.106] (**) Option "xkb_rules" "evdev"
[    27.106] (**) Option "xkb_model" "pc105"
[    27.106] (**) Option "xkb_layout" "pl"
[    27.107] (II) config/udev: Adding input device PC Speaker (/dev/input/event1)
[    27.107] (II) No input driver specified, ignoring this device.
[    27.107] (II) This device may have been added with another device file.
[    27.108] (II) config/udev: Adding input device ACPI Virtual Keyboard Device (/dev/input/event12)
[    27.108] (**) ACPI Virtual Keyboard Device: Applying InputClass "evdev keyboard catchall"
[    27.108] (II) Using input driver 'evdev' for 'ACPI Virtual Keyboard Device'
[    27.108] (**) ACPI Virtual Keyboard Device: always reports core events
[    27.108] (**) evdev: ACPI Virtual Keyboard Device: Device: "/dev/input/event12"
[    27.108] (--) evdev: ACPI Virtual Keyboard Device: Vendor 0 Product 0
[    27.108] (--) evdev: ACPI Virtual Keyboard Device: Found keys
[    27.108] (II) evdev: ACPI Virtual Keyboard Device: Configuring as keyboard
[    27.108] (**) Option "config_info" "udev:/sys/devices/virtual/input/input12/event12"
[    27.108] (II) XINPUT: Adding extended input device "ACPI Virtual Keyboard Device" (type: KEYBOARD, id 14)
[    27.108] (**) Option "xkb_rules" "evdev"
[    27.108] (**) Option "xkb_model" "pc105"
[    27.108] (**) Option "xkb_layout" "pl"
[    27.133] (II) intel(0): EDID vendor "LGD", prod id 826
[    27.134] (II) intel(0): Printing DDC gathered Modelines:
[    27.134] (II) intel(0): Modeline "1366x768"x0.0   70.00  1366 1402 1450 1492  768 771 776 782 -hsync -vsync (46.9 kHz eP)
[    29.877] (II) intel(0): EDID vendor "LGD", prod id 826
[    29.877] (II) intel(0): Printing DDC gathered Modelines:
[    29.877] (II) intel(0): Modeline "1366x768"x0.0   70.00  1366 1402 1450 1492  768 771 776 782 -hsync -vsync (46.9 kHz eP)
[    41.709] (II) intel(0): EDID vendor "LGD", prod id 826
[    41.709] (II) intel(0): Printing DDC gathered Modelines:
[    41.709] (II) intel(0): Modeline "1366x768"x0.0   70.00  1366 1402 1450 1492  768 771 776 782 -hsync -vsync (46.9 kHz eP)
[    43.825] (II) intel(0): EDID vendor "LGD", prod id 826
[    43.825] (II) intel(0): Printing DDC gathered Modelines:
[    43.825] (II) intel(0): Modeline "1366x768"x0.0   70.00  1366 1402 1450 1492  768 771 776 782 -hsync -vsync (46.9 kHz eP)
[    46.151] (II) intel(0): EDID vendor "LGD", prod id 826
[    46.151] (II) intel(0): Printing DDC gathered Modelines:
[    46.151] (II) intel(0): Modeline "1366x768"x0.0   70.00  1366 1402 1450 1492  768 771 776 782 -hsync -vsync (46.9 kHz eP)

Kod:

uname -a

Kod:

Linux debian 3.2.0-4-amd64 #1 SMP Debian 3.2.35-2 x86_64 GNU/Linux

Kod:

lspci | grep VGA

Kod:

00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)

Kod:

lspci | grep Atheros

Kod:

01:00.0 Ethernet controller: Atheros Communications Inc. AR8162 Fast Ethernet (rev 10)
02:00.0 Network controller: Atheros Communications Inc. AR9485 Wireless Network Adapter (rev 01)

Karta graficzna to: Intel HD 4000

Offline

 

#2  2013-03-12 03:12:30

  winnetou - złodziej wirków ]:->

winnetou
złodziej wirków ]:->
Skąd: Jasło/Rzeszów kiedyś Gdańs
Zarejestrowany: 2008-03-31
Serwis

Re: Losowe zawieszanie się systemu

Zawiesza się "ot tak z dupy" czy może wykonujesz jakieś akcje? Jak masz to pokaż jeszcze kern.log. Sprawdzałeś czy zawiesi się jak go odpalisz i nie będziesz nic robił?

LRU: #472938
napisz do mnie: ola@mojmail.eu
Hołmpejdż | Galerie | "Twórczość" || Free Image Hosting

Offline

 

#3  2013-03-12 07:32:37

  ilin - Palacz

ilin
Palacz
Skąd: PRLu
Zarejestrowany: 2006-05-03

Re: Losowe zawieszanie się systemu

Zmień to gnome na xfce4 np.
Na nim zobacz.
gnome3 jest nieprzewidywalne i czasami one może to robić.

Problemy rozwiązujemy na forum nie na PW -> Niech inni na tym skorzystają.
Polski portal Debiana

Offline

 

#4  2013-03-12 07:41:30

  paw4el - Użytkownik

paw4el
Użytkownik
Zarejestrowany: 2010-07-05

Re: Losowe zawieszanie się systemu

Nie zauważyłem, żeby zawieszał się po wykonywaniu ustalonych akcji. Czasem da się popracować 15 min czasem 4 godziny. Trudno powiedzieć od czego to zależy.

Offline

 

#5  2013-03-12 07:44:31

  ilin - Palacz

ilin
Palacz
Skąd: PRLu
Zarejestrowany: 2006-05-03

Re: Losowe zawieszanie się systemu

To tylko hipoteza ale gnome czasami nie lubi się z danymi sterownikami grafiki.

Sprawdź na innym środowisku.

Problemy rozwiązujemy na forum nie na PW -> Niech inni na tym skorzystają.
Polski portal Debiana

Offline

 

#6  2013-03-12 09:06:29

  paw4el - Użytkownik

paw4el
Użytkownik
Zarejestrowany: 2010-07-05

Re: Losowe zawieszanie się systemu

Zainstalowałem KDE i niby wszystko jest, potestuje jeszcze wieczorem.
A co do samego KDE - da się "to" jakoś upodobnić do środowiska z Ubuntu ? Kde standardowo zainstalowanego wygląda bardzo nieciekawie.

Offline

 

#7  2013-03-12 10:11:33

  ilin - Palacz

ilin
Palacz
Skąd: PRLu
Zarejestrowany: 2006-05-03

Re: Losowe zawieszanie się systemu

Pewnie ,że się da.

Masz na myśli podobieństwo do kubuntu ?

Problemy rozwiązujemy na forum nie na PW -> Niech inni na tym skorzystają.
Polski portal Debiana

Offline

 

#8  2013-03-12 13:42:57

  paw4el - Użytkownik

paw4el
Użytkownik
Zarejestrowany: 2010-07-05

Re: Losowe zawieszanie się systemu

Mam nadzieje, ze nikt się nie obrazi ale KDE dmyślnie zainstalowane wygląda bardzo nieciekawie.
Odpalałem LiveCD Ubuntu i tam to wygląda interesująco - mogłbym się przesiąść z Gnome3 na środowisko graficzne z Ubuntu 12.10.

Co do samego błedu to znalazłem coś takiego

Offline

 

#9  2013-03-12 13:49:48

  yossarian - Szczawiożerca

yossarian
Szczawiożerca
Skąd: Shangri-La
Zarejestrowany: 2011-04-25

Re: Losowe zawieszanie się systemu

W sumie da się w KDE wszystko ustawić.
Są nawet jakieś gotowe projekty dla KDE:
http://userbase.kde.org/Homerun

Sprawdź na nowszych sterach Intela (experimental) i nowszym kernelu (aptosid).
Ty masz Ivy Bridge, a to raczej nowy sprzęt.

Offline

 

#10  2013-03-12 15:15:54

  marcin.t - Użytkownik

marcin.t
Użytkownik
Skąd: Białystok
Zarejestrowany: 2008-01-06
Serwis

Re: Losowe zawieszanie się systemu

Po instalacji KDE nie spodziewaj się rozwiązania problemu.(ja mam zainstalowane KDE)
Odkąd zmieniłem komputer mam to samo. Nagła zwiecha bez większego powodu, wisi mysz, obraz, klawiatura jeśli był jakiś dźwięk to on potrafi się zapętlić.
Tak na moje oko to jest to wina Intel HD 4000.
Ale co z tym zrobić to nie mam pojęcia.

www.agrojustynka.pl
www.fotoblog.playfresh.net - mój foto blog

Offline

 

#11  2013-03-12 15:16:58

  paw4el - Użytkownik

paw4el
Użytkownik
Zarejestrowany: 2010-07-05

Re: Losowe zawieszanie się systemu

@marcin.t a jaką masz wersję kernela?

Ostatnio edytowany przez paw4el (2013-03-12 15:21:37)

Offline

 

#12  2013-03-12 15:28:57

  yossarian - Szczawiożerca

yossarian
Szczawiożerca
Skąd: Shangri-La
Zarejestrowany: 2011-04-25

Re: Losowe zawieszanie się systemu

Sprawdź tak:
http://forum.dug.net.pl/viewtopic.php?pid=226635#p226635

Do tego bym potem dorzucił to:
http://packages.debian.org/experimental/xserver-xorg-video-intel

Offline

 

#13  2013-03-12 15:49:02

  marcin.t - Użytkownik

marcin.t
Użytkownik
Skąd: Białystok
Zarejestrowany: 2008-01-06
Serwis

Re: Losowe zawieszanie się systemu

Kod:

marcin@Desktop:~$ uname -a
Linux Desktop 3.2.0-4-amd64 #1 SMP Debian 3.2.35-2 x86_64 GNU/Linux
www.agrojustynka.pl
www.fotoblog.playfresh.net - mój foto blog

Offline

 

#14  2013-03-12 16:32:17

  P@blo - Nadworny matematyk

P@blo
Nadworny matematyk
Skąd: Wrocław v Jasło
Zarejestrowany: 2010-11-11

Re: Losowe zawieszanie się systemu

Dodam że 15 innych (nowych) komputerów ma też z tym problem. Mój niedawno kupiony też się zwiesił mi kilka razy, ale miałem nadzieje, że to wina wine :) Jednak prawie pewny jestem, że wina stoi po stronie grafiki intela, bo raz, że to jest jedyna ich wspólna cecha, a dwa to:

Kod:

~$ ls /var/log/Xorg.*|wc -c
28830

Ciekawe... ;)

ThinkPadX220i
| Procesor: Intel(R) Core(TM) i3-2310M CPU @ 2.10GHz |
|  Debian: sid   |   Arch: amd64   |   Sound: alsa   |
| No DE | WM: DWM  |  DM: .bash_profile  |  BIOS+MBR |

Offline

 

#15  2013-03-12 16:45:09

  paw4el - Użytkownik

paw4el
Użytkownik
Zarejestrowany: 2010-07-05

Re: Losowe zawieszanie się systemu

Zostaje aktualizacja do SID'a + upgrade kernela

Offline

 

#16  2013-03-12 17:04:46

  yossarian - Szczawiożerca

yossarian
Szczawiożerca
Skąd: Shangri-La
Zarejestrowany: 2011-04-25

Re: Losowe zawieszanie się systemu

paw4el napisał(-a):

Zostaje aktualizacja do SID'a + upgrade kernela

Nie trzeba aktualizować.
Kernel ten działa z Wheezy.

Offline

 

#17  2013-03-14 20:36:16

  paw4el - Użytkownik

paw4el
Użytkownik
Zarejestrowany: 2010-07-05

Re: Losowe zawieszanie się systemu

Zrobiłem aktualizację do Sida, dodatkowo skompilowałem kernel w wersji 3.8.2
Wydaje się, ze problem zniknął.

Offline

 

 

Strony: 1

Stopka forum

Powered by PunBB
© Copyright 2002–2005 Rickard Andersson
Możesz wyłączyć AdBlock — tu nie ma reklam ;-)