Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!

Ogłoszenie

Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.

Strony: 1

 

#1  2011-05-22 22:13:26

  eTo - Użytkownik

eTo
Użytkownik
Zarejestrowany: 2010-09-29

problem z.. dyskiem czy procesorem?

Ostatnio coś dziwnego zaczęło się dziać z moim pc, mianowicie zdarza mu się zawieszać (dużo) częściej niż zwykle i to z bliżej nieokreślonych przyczyn.
Jest to chyba problem ze sprzętem, bo komp zawiesza się zarówno podczas pod Debianem jak i pod windowsem (choć pod xpkiem częściej), a zwis poprzedza dziwny dźwięk przypominający jakby pyknięcie przechodzące w syknięcie/cichy pisk dochodzący chyba z okolic dysków, po którym lampka dysku twardego zapala się na kilka sekund, żeby zgasnąć, a po następnej chwili system przestaje odpowiadać na cokolwiek innego niż przycisk reset. Dzieje się to w różnych odstępach czasu, i nie udało mi się dokładnie tego zjawiska odtworzyć, ale pod linuksem przynajmniej wywala z x'ów zostawiając na ekranie komunikat:

Kod:

[27169.060004]  [Hardware Error]: CPU 0: Machine check Exception: 4 Bank 4: b200000000070f0f
[27169.060004]  [Hardware Error]: TSC 31701bf43289
[27169.060004]  [Hardware Error]: PROCESSOR 2:f4a TIME 1306088884 SOCKET 0 APIC 0
[27169.060004]  [Hardware Error]: No Human readable MCE decoding support on this CPU type.
[27169.060004]  [Hardware Error]: Run the message through 'mcelog --ascii' to decode
[27169.060004]  [Hardware Error]: Machone Check: Processor context corrupt
[27169.060004] Kernel panic - not syncing: Fatal machine on current CPU
[27169.060004] Pid 178, comm: scs1_eh_1 Tainted: G     M               0 2.6.38-2-686 #1
[27169.060004] Call Trace:
[27169.060004]   [<c128e6e7>]  ? panic+0x4d/0x141
[27169.060004]   [<c100fe7f>]  ? mce_panic+0x146/0x15d
[27169.060004]   [<c1010a7f>]  ? do_machine_check+0x5d2/0x6c5
[27169.060004]   [<c10104ad>]  ? do_machine_check+0x0/0xc5
[27169.060004]   [<c12908b7>]  ? erroc_code+0x67/0x6c
[27169.060004]   [<c114d907>]  ? ioread8+0x16/0x2a
[27169.060004]   [<f80913b8>]  ? ata_sff_altstatus+0x18/0x19 [libata]
[27169.060004]   [<f80931eb>]  ? ata_sff_lost_interrupt+0x42/0x7d [libata]
[27169.060004]   [<f809017a>]  ? ata_scsi_error+0x3e/0x5a6 [libata]
[27169.060004]   [<f823bf2b>]  ? scsi_error_handler+0x103/0x52f [scsi_mod]
[27169.060004]   [<c1026d3b>]  ? complete+0x28/0x36
[27169.060004]   [<f823be28>]  ? scsi_error_handler+0x0/0x52f [scsi_mod]
[27169.060004]   [<c10449ed>]  ? kthread+0x63/0x68
[27169.060004]   [<c104498a>]  ? kthread+0x0/0x68
[27169.060004]   [<c10034be>]  ? kernel_thread_helper+0x6/0x10
[27169.060004] panic occurred, switching back to test console

jednak nadal nie da się nic zrobić poza zresetowaniem, a gdy system już jest zawieszony lampa dysku twardego świeci się stale.

Czy jeszcze gdzieś w systemie są jakieś logi z tego zdarzenia, nie wiem, bo szczerze mówiąc nie za bardzo wiem w których lodach szukać.
Miał ktoś może podobną sytuację? Bo w sumie mam nadzieję, że nie siada mi jeden z dysków, jak przypuszczam sądząc po odgłosach poprzedzających zawieszenie się..

Offline

 

#2  2011-05-22 22:27:52

  Huk - Smoleńsk BULWA!

Huk
Smoleńsk BULWA!
Zarejestrowany: 2006-11-08

Re: problem z.. dyskiem czy procesorem?

Radzę zapuścić na dysku smarta i wkleić wynik tutaj:

Kod:

smartctl --test=short /dev/sda

a potem

smartctl --all /dev/sda (czy jaki tam masz ten dysk)

Stawiałbym osobiści bardziej na dysk niż procka - choć i w tym drugim przypadku jest możliwość że się mąci coś (np zacierający się wiatraczek i problem gotowy) - dobrze było by monitorować temperaturę.

Jeszcze zapytam - jak już się wiesi, to potem po resecie normalnie wstaje czy też jakieś problemy są?

Ostatnio edytowany przez Huk (2011-05-22 22:30:34)

Offline

 

#3  2011-05-23 00:03:17

  eTo - Użytkownik

eTo
Użytkownik
Zarejestrowany: 2010-09-29

Re: problem z.. dyskiem czy procesorem?

W sumie mam 2 dyski, dla pewności zrobiłem test na obu, choć wydaje mi się, że tylko z tym pierwszym ( /dev/sda - tym 120GB na którym w sumie mam zainstalowane oba systemy) są jakieś problemy.
Wyniki testu:

Kod:

[b]root@debian:/home/eto# smartctl --test=short /dev/sda[/b]
smartctl 5.41 2011-03-16 r3296 [i686-pc-linux-gnu-2.6.38-2-686] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
Sending command: "Execute SMART Short self-test routine immediately in off-line mode".
Drive command "Execute SMART Short self-test routine immediately in off-line mode" successful.
Testing has begun.
Please wait 2 minutes for test to complete.
Test will complete after Sun May 22 22:56:37 2011

Use smartctl -X to abort test.

[b]root@debian:/home/eto# smartctl --all /dev/sda[/b]
smartctl 5.41 2011-03-16 r3296 [i686-pc-linux-gnu-2.6.38-2-686] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Caviar SE family
Device Model:     WDC WD1200JB-00GVC0
Serial Number:    WD-WCALA2350100
Firmware Version: 08.02D08
User Capacity:    120,034,123,776 bytes
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   6
ATA Standard is:  Exact ATA specification draft version not indicated
Local Time is:    Sun May 22 22:57:38 2011 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x85)    Offline data collection activity
                    was aborted by an interrupting command from host.
                    Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)    The previous self-test routine completed
                    without error or no self-test has ever 
                    been run.
Total time to complete Offline 
data collection:         ( 3639) seconds.
Offline data collection
capabilities:              (0x7b) SMART execute Offline immediate.
                    Auto Offline data collection on/off support.
                    Suspend Offline collection upon new
                    command.
                    Offline surface scan supported.
                    Self-test supported.
                    Conveyance Self-test supported.
                    Selective Self-test supported.
SMART capabilities:            (0x0003)    Saves SMART data before entering
                    power-saving mode.
                    Supports SMART auto save timer.
Error logging capability:        (0x01)    Error logging supported.
                    No General Purpose Logging support.
Short self-test routine 
recommended polling time:      (   2) minutes.
Extended self-test routine
recommended polling time:      (  51) minutes.
Conveyance self-test routine
recommended polling time:      (   5) minutes.
SCT capabilities:            (0x003f)    SCT Status supported.
                    SCT Error Recovery Control supported.
                    SCT Feature Control supported.
                    SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   200   171   051    Pre-fail  Always       -       0
  3 Spin_Up_Time            0x0007   174   160   021    Pre-fail  Always       -       3841
  4 Start_Stop_Count        0x0032   097   097   040    Old_age   Always       -       3871
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000b   200   200   051    Pre-fail  Always       -       0
  9 Power_On_Hours          0x0032   066   066   000    Old_age   Always       -       24994
 10 Spin_Retry_Count        0x0013   100   100   051    Pre-fail  Always       -       0
 11 Calibration_Retry_Count 0x0013   100   100   051    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   097   097   000    Old_age   Always       -       3765
194 Temperature_Celsius     0x0022   102   088   000    Old_age   Always       -       48
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0012   200   200   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0012   200   200   000    Old_age   Always       -       0
199 UDMA_CRC_Error_Count    0x000a   200   253   000    Old_age   Always       -       2
200 Multi_Zone_Error_Rate   0x0009   200   200   051    Pre-fail  Offline      -       0

SMART Error Log Version: 1
ATA Error Count: 52 (device log contains only the most recent five errors)
    CR = Command Register [HEX]
    FR = Features Register [HEX]
    SC = Sector Count Register [HEX]
    SN = Sector Number Register [HEX]
    CL = Cylinder Low Register [HEX]
    CH = Cylinder High Register [HEX]
    DH = Device/Head Register [HEX]
    DC = Device Command Register [HEX]
    ER = Error register [HEX]
    ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 52 occurred at disk power-on lifetime: 2617 hours (109 days + 1 hours)
  When the command that caused the error occurred, the device was doing SMART Offline or Self-test.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 01 a5 7d 60 e0  Error: UNC at LBA = 0x00607da5 = 6323621

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  40 00 01 a5 7d 60 00 00      00:28:57.650  READ VERIFY SECTOR(S)
  c8 00 01 00 00 00 00 00      00:28:57.650  READ DMA
  40 00 02 a5 7d 60 00 00      00:28:57.650  READ VERIFY SECTOR(S)
  c8 00 01 00 00 00 00 00      00:28:57.650  READ DMA
  40 00 02 a3 7d 60 00 00      00:28:57.650  READ VERIFY SECTOR(S)

Error 51 occurred at disk power-on lifetime: 2617 hours (109 days + 1 hours)
  When the command that caused the error occurred, the device was doing SMART Offline or Self-test.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 02 a5 7d 60 e0  Error: UNC at LBA = 0x00607da5 = 6323621

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  40 00 02 a5 7d 60 00 00      00:28:55.200  READ VERIFY SECTOR(S)
  c8 00 01 00 00 00 00 00      00:28:55.200  READ DMA
  40 00 02 a3 7d 60 00 00      00:28:55.200  READ VERIFY SECTOR(S)
  c8 00 01 00 00 00 00 00      00:28:55.200  READ DMA
  40 00 04 a3 7d 60 00 00      00:28:55.200  READ VERIFY SECTOR(S)

Error 50 occurred at disk power-on lifetime: 2617 hours (109 days + 1 hours)
  When the command that caused the error occurred, the device was doing SMART Offline or Self-test.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 04 a5 7d 60 e0  Error: UNC at LBA = 0x00607da5 = 6323621

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  40 00 04 a3 7d 60 00 00      00:28:52.750  READ VERIFY SECTOR(S)
  40 00 04 9f 7d 60 00 00      00:28:52.750  READ VERIFY SECTOR(S)
  c8 00 01 76 16 71 02 00      00:28:52.750  READ DMA
  40 00 08 a7 7d 60 00 00      00:28:52.750  READ VERIFY SECTOR(S)
  c8 00 01 00 00 00 00 00      00:28:52.750  READ DMA

Error 49 occurred at disk power-on lifetime: 2617 hours (109 days + 1 hours)
  When the command that caused the error occurred, the device was doing SMART Offline or Self-test.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 08 a5 7d 60 e0  Error: UNC at LBA = 0x00607da5 = 6323621

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  40 00 08 9f 7d 60 00 00      00:28:50.250  READ VERIFY SECTOR(S)
  c8 00 01 00 00 00 00 00      00:28:50.250  READ DMA
  40 00 10 af 7d 60 00 00      00:28:50.250  READ VERIFY SECTOR(S)
  c8 00 01 00 00 00 00 00      00:28:50.250  READ DMA
  40 00 10 9f 7d 60 00 00      00:28:50.250  READ VERIFY SECTOR(S)

Error 48 occurred at disk power-on lifetime: 2617 hours (109 days + 1 hours)
  When the command that caused the error occurred, the device was doing SMART Offline or Self-test.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 10 a5 7d 60 e0  Error: UNC at LBA = 0x00607da5 = 6323621

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  40 00 10 9f 7d 60 00 00      00:28:47.800  READ VERIFY SECTOR(S)
  c8 00 01 76 16 71 02 00      00:28:47.800  READ DMA
  c8 00 01 00 00 00 00 00      00:28:47.800  READ DMA
  40 00 20 9f 7d 60 00 00      00:28:47.800  READ VERIFY SECTOR(S)
  c8 00 01 00 00 00 00 00      00:28:47.800  READ DMA

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%     24994         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.


[b]root@debian:/home/eto# smartctl --all /dev/sdb[/b]
smartctl 5.41 2011-03-16 r3296 [i686-pc-linux-gnu-2.6.38-2-686] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Barracuda 7200.9 family
Device Model:     ST3160812A
Serial Number:    5LS6YPSC
Firmware Version: 3.AAJ
User Capacity:    160,041,885,696 bytes
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   7
ATA Standard is:  Exact ATA specification draft version not indicated
Local Time is:    Sun May 22 23:40:45 2011 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)    Offline data collection activity
                    was completed without error.
                    Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)    The previous self-test routine completed
                    without error or no self-test has ever 
                    been run.
Total time to complete Offline 
data collection:         (  430) seconds.
Offline data collection
capabilities:              (0x5b) SMART execute Offline immediate.
                    Auto Offline data collection on/off support.
                    Suspend Offline collection upon new
                    command.
                    Offline surface scan supported.
                    Self-test supported.
                    No Conveyance Self-test supported.
                    Selective Self-test supported.
SMART capabilities:            (0x0003)    Saves SMART data before entering
                    power-saving mode.
                    Supports SMART auto save timer.
Error logging capability:        (0x01)    Error logging supported.
                    General Purpose Logging supported.
Short self-test routine 
recommended polling time:      (   1) minutes.
Extended self-test routine
recommended polling time:      (  54) minutes.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   093   081   006    Pre-fail  Always       -       152116295
  3 Spin_Up_Time            0x0003   098   093   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   099   099   020    Old_age   Always       -       1564
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       1
  7 Seek_Error_Rate         0x000f   086   060   030    Pre-fail  Always       -       429966902
  9 Power_On_Hours          0x0032   086   086   000    Old_age   Always       -       12348
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   099   099   020    Old_age   Always       -       1672
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0022   056   048   045    Old_age   Always       -       44 (Min/Max 43/45)
194 Temperature_Celsius     0x0022   044   052   000    Old_age   Always       -       44 (0 14 0 0)
195 Hardware_ECC_Recovered  0x001a   048   046   000    Old_age   Always       -       27228278
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0000   100   253   000    Old_age   Offline      -       0
202 Data_Address_Mark_Errs  0x0032   100   253   000    Old_age   Always       -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%     12348         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Teraz tylko czy da się jakoś rozwiązać te problemy z dyskiem, czy póki jeszcze działa lepiej zacząć kopiować z niego dane zanim padnie kompletnie?

Offline

 

#4  2011-05-23 00:32:40

  Huk - Smoleńsk BULWA!

Huk
Smoleńsk BULWA!
Zarejestrowany: 2006-11-08

Re: problem z.. dyskiem czy procesorem?

Hmmm powiem tak - na 100% coś jest z pierwszym dyskiem nie tak, zgodnie z tym:

http://www.linuxjournal.com/magazine/monitoring-har … mart?page=0,1

wartości "value" powinny być równe lub poniżej "threshold" aby można było mówić o usterce - z tego co widzę wszystkie wartości są jeszcze normalne, co z kolei o niczym nie musi świadczyć bo SMART na tym dysku może po prostu nie monitorować tego co się pierdzieli...

Dziwi mnie trochę fakt że zanotowane przez SMART błędy wystąpiły w 2617 godzinie życia dysku, a obecnie dysk pracuje już 24994 godzin, co by oznaczało że jakieś błędy wystąpiły dobre 2-2.5 roku temu... a rozumiem że problemy z kompem zaczęły dziać się niedawno... trochę to nie trzyma się kupy...

Jak wygląda sprawa kabli/taśm od dysku? Nowe/stare poskręcane? Może tam leży problem? Jak możesz przetestuj na jakiejś innej szelce.

EDIT:

Jeszcze mógłbyś zapuścić test off-line:

Kod:

smartctl -t offline /dev/sda

+ ewentualnie long-test:

Kod:

smartctl --test=long /dev/hda

po teście offline zmianie może ulec to:

200 Multi_Zone_Error_Rate   0x0009   200   200   051    Pre-fail  Offline      -       0

Być może tam robi się jakieś bubu...

Ostatnio edytowany przez Huk (2011-05-23 00:42:28)

Offline

 

#5  2011-06-17 21:12:56

  eTo - Użytkownik

eTo
Użytkownik
Zarejestrowany: 2010-09-29

Re: problem z.. dyskiem czy procesorem?

Temat w sumie rozwiązany.
Kupiłem nowy kabel + w międzyczasie zrobiłem te testy(choć jak porównywałem wyniki, to były takie same jak .. i jak usterka była, tak ostatnio nawet już co chwilę zaczęło pykać i dopiero po szturchnięciu dysk zaczynał pracować normalnie. Jeszcze odnośnie tego wstawania, to tu problemów nie ma. Natomiast podczas wyłączania (nawet jak pyknie raz, a kompa wyłączam jakąś godzinę później) to sie wieszał. Niby go przeskanowałem, na obecność bad sektorów, wszystko niby w porządku..
Sory, że dopiero teraz daje odpowiedź, ale nie miałem ostatnio za dużo czasu.
A problem w sumie rozwiąże się do końca we wtorek, jak przyjdzie nowy pc..

Offline

 

#6  2011-09-06 09:41:10

  wampir - Użytkownik

wampir
Użytkownik
Zarejestrowany: 2007-04-11

Re: problem z.. dyskiem czy procesorem?

Mam Podobny Problem, wykonałem takie testy:

Kod:

[b]smartctl --all /dev/sda[/b]
smartctl 5.40 2010-07-12 r3124 [i686-pc-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Device Model:     WDC WD5000AAKX-001CA0
Serial Number:    WD-WMAYU0720718
Firmware Version: 15.01H15
User Capacity:    500,107,862,016 bytes
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   8
ATA Standard is:  Exact ATA specification draft version not indicated
Local Time is:    Tue Sep  6 09:42:37 2011 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82) Offline data collection activity
                                        was completed without error.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      ( 242) Self-test routine in progress...
                                        20% of test remaining.
Total time to complete Offline
data collection:                 (8400) seconds.
Offline data collection
capabilities:                    (0x7b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        (  85) minutes.
Conveyance self-test routine
recommended polling time:        (   5) minutes.
SCT capabilities:              (0x3037) SCT Status supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       0
  3 Spin_Up_Time            0x0027   146   144   021    Pre-fail  Always       -       3700
  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       20
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   200   200   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       262
 10 Spin_Retry_Count        0x0032   100   253   000    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0032   100   253   000    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       18
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       15
193 Load_Cycle_Count        0x0032   200   200   000    Old_age   Always       -       4
194 Temperature_Celsius     0x0022   104   095   000    Old_age   Always       -       39
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   200   200   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0008   200   200   000    Old_age   Offline      -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%       262         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Oraz drgi dysk

Kod:

 [b]smartctl --all /dev/sdb[/b]
smartctl 5.40 2010-07-12 r3124 [i686-pc-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Device Model:     WDC WD5000AVDS-73U7B1
Serial Number:    WD-WCAV9M894350
Firmware Version: 01.00A01
User Capacity:    500,107,862,016 bytes
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   8
ATA Standard is:  Exact ATA specification draft version not indicated
Local Time is:    Tue Sep  6 09:45:42 2011 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
                                        was never started.
                                        Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                 (12000) seconds.
Offline data collection
capabilities:                    (0x7b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        ( 140) minutes.
Conveyance self-test routine
recommended polling time:        (   5) minutes.
SCT capabilities:              (0x3037) SCT Status supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       0
  3 Spin_Up_Time            0x0027   191   190   021    Pre-fail  Always       -       3416
  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       42
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   200   200   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   097   097   000    Old_age   Always       -       2492
 10 Spin_Retry_Count        0x0032   100   253   000    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0032   100   253   000    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       40
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       33
193 Load_Cycle_Count        0x0032   200   200   000    Old_age   Always       -       8
194 Temperature_Celsius     0x0022   105   097   000    Old_age   Always       -       38
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   100   253   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0008   100   253   000    Old_age   Offline      -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]


SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Kod:

 smartctl -t offline /dev/sda
smartctl 5.40 2010-07-12 r3124 [i686-pc-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
Sending command: "Execute SMART off-line routine immediately in off-line mode".
Drive command "Execute SMART off-line routine immediately in off-line mode" successful.
Testing has begun.
Please wait 8400 seconds for test to complete.
Test will complete after Tue Sep  6 12:07:31 2011

Use smartctl -X to abort test.
root@samba:/home/wampir# smartctl -t offline /dev/sdb
smartctl 5.40 2010-07-12 r3124 [i686-pc-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
Sending command: "Execute SMART off-line routine immediately in off-line mode".
Drive command "Execute SMART off-line routine immediately in off-line mode" successful.
Testing has begun.
Please wait 12000 seconds for test to complete.
Test will complete after Tue Sep  6 13:07:46 2011

Use smartctl -X to abort test.

Taśmy wymieniłem, oraz uruchomiłem Live CD i uruchomiłem

Kod:

fsck.ext3 -p -c

przychodzi mi jeszcze do głowy:
1. Reset Biosu do ustawień domyślnych
Szkoda że błąd z Kernel Panic nigdzie się nie zapisał, przynajmniej ja go nie znalazłem.
A i jeszcze wykonałem memtesta.
Co jeszcze mogę zrobić?

Ostatnio edytowany przez wampir (2011-09-06 09:43:17)

Offline

 

 

Strony: 1

Stopka forum

Powered by PunBB
© Copyright 2002–2005 Rickard Andersson
To nie jest tylko forum, to nasza mała ojczyzna ;-)