Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!
Ogłoszenie
Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.
#1 2008-07-04 18:07:11
torpeda80 - 
Użytkownik
- torpeda80
- Użytkownik
- Zarejestrowany: 2007-03-28
/dev/ttyUSB2 unrecognized option
Witam
Mam problem z urzadzeniem USB. Mianowicie jestem podlaczony do sieci prze iplus, modem option icon 225. Łącze sie przez skrypty i pppd. Siec mialem i wszytsko bylo ok az do w czoraj gdy sie bawilem by podlaczyc irda. zaladowalem moduly przez modcon do irdy i po tym chyba mi siadlo. po wykonaniu pppd call iplus otzrymuje komunikat: unrecognized option /dev/ttyUSB2. Rozumiem ze nie widzi portu usb. czy to mozliwe? pomozcie jak to ugryzc?
Offline
#2 2008-07-04 18:18:37
bercik - Moderator Mamut
Re: /dev/ttyUSB2 unrecognized option
sprawdz czy nie zmienilo sie oznaczenie portu ttyUSB
"Wszyscy wiedzą, że czegoś zrobić nie można. Ale przypadkowo znajduje się jakiś nieuk, który tego nie wie. I on właśnie robi odkrycie." (A.Einstein)
Offline
#3 2008-07-04 18:30:11
torpeda80 - Użytkownik
- torpeda80
- Użytkownik
- Zarejestrowany: 2007-03-28
Re: /dev/ttyUSB2 unrecognized option
zmienilem w skrypcie na /dev/ttyUSB1 i przepiolem modem i ten samo info wyskoczylo. chyba ze do zlego nr wlozylem ale zaraz sprawdze.
Offline
#4 2008-07-04 19:11:20
bercik - Moderator Mamut
Re: /dev/ttyUSB2 unrecognized option
jezeli masz udev to zobacz jakie urzadzenia /dev/ttyUSB* sa tworzone ... standardowo numer tego nie zalezy od portu USB a od kolejnosci pojawiania sie tego typu urzadzen w systemie ...
"Wszyscy wiedzą, że czegoś zrobić nie można. Ale przypadkowo znajduje się jakiś nieuk, który tego nie wie. I on właśnie robi odkrycie." (A.Einstein)
Offline
#5 2008-07-04 19:26:16
torpeda80 - Użytkownik
- torpeda80
- Użytkownik
- Zarejestrowany: 2007-03-28
Re: /dev/ttyUSB2 unrecognized option
tylko jak mam to zobaczyc?wejsc do katalogu?
aha bym zapomial jak odpalam pppd call iplus to mam:
pppd: in file /etc/ppp/peers/iplus unrecognized option /dev/ttyUSB2
Ostatnio edytowany przez torpeda80 (2008-07-04 19:31:42)
Offline
#6 2008-07-04 20:04:06
torpeda80 - Użytkownik
- torpeda80
- Użytkownik
- Zarejestrowany: 2007-03-28
Re: /dev/ttyUSB2 unrecognized option
w /dev nie ma /dev/ttyUSB zadnego - po wykonaniu lsusb. czy to sie gdzies indziej znajduje?
#ls /dev/ttyUSB*
ls: nie ma dostępu do /dev/ttyUSB*: Nie ma takiego pliku ani katalogu
Ostatnio edytowany przez torpeda80 (2008-07-04 20:55:24)
Offline
#7 2008-07-05 00:51:10
bercik - Moderator Mamut
Re: /dev/ttyUSB2 unrecognized option
przy podlaczonym modemie nie ma ?
co jest wpisywane do dmesg w momecie podlaczania modemu ?
"Wszyscy wiedzą, że czegoś zrobić nie można. Ale przypadkowo znajduje się jakiś nieuk, który tego nie wie. I on właśnie robi odkrycie." (A.Einstein)
Offline
#8 2008-07-05 08:26:18
fnmirk - Redaktor
- fnmirk
- Redaktor
- Zarejestrowany: 2008-02-19
Re: /dev/ttyUSB2 unrecognized option
lsusb musisz wykonać jako root. Inaczej nie wszystko zobaczysz. Jaki jest pobór prądu przez modem? Jest to gdzieś napisane. W instrukcji modemu lub na jego etykiecie.
Offline
#9 2008-07-05 23:07:14
torpeda80 - Użytkownik
- torpeda80
- Użytkownik
- Zarejestrowany: 2007-03-28
Re: /dev/ttyUSB2 unrecognized option
gdy wykonuje lsusb jako root to jest tam moj moedm option ale jak wykonuje ls /dev/ttyUSB* lub gdy przegladm przy wlaczonym modemie /dev/ to nie ma tam urzadzen zadnych /dev/ttyUSBX.
moj dmesg to:
Kod:
[Initializing cgroup subsys cpuset
Linux version 2.6.24-1-686 (Debian 2.6.24-7) (dannf@debian.org) (gcc version 4.1.3 20080114 (prerelease) (Debian 4.1.2-19)) #1 SMP Thu May 8 02:16:39 UTC 2008
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000dffb000 (usable)
BIOS-e820: 000000000dffb000 - 000000000dfff000 (ACPI data)
BIOS-e820: 000000000dfff000 - 000000000e000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
223MB LOWMEM available.
Entering add_active_range(0, 0, 57339) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 57339
HighMem 57339 -> 57339
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 57339
On node 0 totalpages: 57339
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 415 pages used for memmap
Normal zone: 52828 pages, LIFO batch:15
HighMem zone: 0 pages used for memmap
Movable zone: 0 pages used for memmap
DMI 2.3 present.
ACPI: RSDP 000F6460, 0014 (r0 ASUS )
ACPI: RSDT 0DFFB000, 0030 (r1 ASUS A2H/L 42302E31 MSFT 31313031)
ACPI: FACP 0DFFB0C0, 0074 (r1 ASUS A2H/L 42302E31 MSFT 31313031)
ACPI: DSDT 0DFFB134, 39A2 (r1 ASUS A2H/L 1000 MSFT 100000E)
ACPI: FACS 0DFFF000, 0040
ACPI: BOOT 0DFFB030, 0028 (r1 ASUS A2H/L 42302E31 MSFT 31313031)
ACPI: APIC 0DFFB058, 005A (r1 ASUS A2H/L 42302E31 MSFT 31313031)
ACPI: PM-Timer IO Port: 0xe408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:2 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 128, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 20 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 10000000 (gap: 0e000000:f0c00000)
swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 56892
Kernel command line: root=/dev/hda5 ro
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 1024 (order: 10, 4096 bytes)
Detected 2191.138 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 217324k/229356k available (1786k kernel code, 11492k reserved, 714k data, 248k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xce800000 - 0xff7fe000 ( 783 MB)
lowmem : 0xc0000000 - 0xcdffb000 ( 223 MB)
.init : 0xc0377000 - 0xc03b5000 ( 248 kB)
.data : 0xc02beaf9 - 0xc0371384 ( 714 kB)
.text : 0xc0100000 - 0xc02beaf9 (1786 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 4386.34 BogoMIPS (lpj=8772684)
Security Framework initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 256K
CPU: Hyper-Threading is disabled
CPU: After all inits, caps: bfebfbff 00000000 00000000 0000b080 00004400 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU0: Thermal monitoring enabled
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 11k freed
ACPI: Core revision 20070126
CPU0: Intel Mobile Intel(R) Celeron(R) CPU 2.20GHz stepping 09
Total of 1 processors activated (4386.34 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Brought up 1 CPUs
net_namespace: 64 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xf1740, last bus=1
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
Enabling SiS 96x SMBus.
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 9 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 9 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 6 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 6 7) *11
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 5 11) *4
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 5 11) *4
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 5 11) *4
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 5 11) *4
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NET: Registered protocol family 8
NET: Registered protocol family 20
ACPI: RTC can wake from S4
Time: tsc clocksource has been installed.
system 00:00: iomem range 0x0-0x9ffff could not be reserved
system 00:00: iomem range 0xf0000-0xfffff could not be reserved
system 00:00: iomem range 0x100000-0xdffffff could not be reserved
system 00:00: iomem range 0xfec00000-0xfec000ff could not be reserved
system 00:02: ioport range 0xe400-0xe47f has been reserved
system 00:02: ioport range 0xe480-0xe4ff has been reserved
system 00:02: ioport range 0xe600-0xe61f has been reserved
system 00:02: ioport range 0x480-0x48f has been reserved
system 00:02: iomem range 0xffee0000-0xffefffff has been reserved
system 00:03: iomem range 0xfffe0000-0xffffffff could not be reserved
system 00:04: ioport range 0x4d0-0x4d1 has been reserved
system 00:04: ioport range 0x600-0x61f has been reserved
system 00:04: ioport range 0x800-0x87f has been reserved
system 00:04: ioport range 0x880-0x88f has been reserved
system 00:04: iomem range 0xfff80000-0xfffdffff has been reserved
system 00:0d: ioport range 0x290-0x297 has been reserved
system 00:0d: ioport range 0x500-0x507 has been reserved
PCI: Bridge: 0000:00:01.0
IO window: d000-dfff
MEM window: e7800000-e7ffffff
PREFETCH window: f0000000-febfffff
PCI: Bus 2, cardbus bridge: 0000:00:0a.0
IO window: 00001000-000010ff
IO window: 00001400-000014ff
PREFETCH window: 10000000-13ffffff
MEM window: 14000000-17ffffff
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 16 (level, low) -> IRQ 16
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
checking if image is initramfs... it is
Switched to high resolution mode on CPU 0
Freeing initrd memory: 6367k freed
Simple Boot Flag at 0x3a set to 0x1
audit: initializing netlink socket (disabled)
audit(1215244418.024:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:01:00.0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ACPI: PCI Interrupt 0000:00:02.6[C] -> GSI 18 (level, low) -> IRQ 17
ACPI: PCI interrupt for device 0000:00:02.6 disabled
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
registered taskstats version 1
Freeing unused kernel memory: 248k freed
input: AT Translated Set 2 keyboard as /class/input/input0
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
ACPI: Thermal Zone [THRM] (42 C)
ACPI: PCI Interrupt 0000:00:02.3[b] -> GSI 17 (level, low) -> IRQ 18
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
firewire_ohci: Added fw-ohci device 0000:00:02.3, OHCI version 1.0
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
SIS5513: IDE controller (0x1039:0x5513 rev 0x00) at PCI slot 0000:00:02.5
SIS5513: not 100% native mode: will probe irqs later
SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
ide0: BM-DMA at 0xb800-0xb807, BIOS settings: hda:DMA, hdb:DMA
SIS5513: IDE port disabled
Probing IDE interface ide0...
usbcore: registered new device driver usb
sis900.c: v1.08.10 Apr. 2 2006
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
Marking TSC unstable due to: TSC halts in idle.
Time: acpi_pm clocksource has been installed.
hdb: TOSHIBA DVD-ROM SD-R2312, ATAPI CD/DVD-ROM drive
firewire_core: created new fw device fw0 (0 config rom retries, S400)
hda: IC25N040ATCS04-0, ATA DISK drive
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/100 mode selected
hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hdb: UDMA/33 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> IRQ 19
0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1.
0000:00:04.0: Using transceiver found at address 1 as default
eth0: SiS 900 PCI Fast Ethernet at 0xa000, IRQ 19, 00:0e:a6:0b:c4:6b
ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 20
ohci_hcd 0000:00:03.0: OHCI Host Controller
ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:03.0: irq 20, io mem 0xe6800000
udev: renamed network interface eth0 to eth1
SCSI subsystem initialized
libata version 3.00 loaded.
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:03.1[b] -> GSI 21 (level, low) -> IRQ 21
ohci_hcd 0000:00:03.1: OHCI Host Controller
ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:03.1: irq 21, io mem 0xe6000000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 22 (level, low) -> IRQ 22
ohci_hcd 0000:00:03.2: OHCI Host Controller
ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:03.2: irq 22, io mem 0xe5800000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:03.3: EHCI Host Controller
ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 4
PCI: cache line size of 128 is not supported by device 0000:00:03.3
ehci_hcd 0000:00:03.3: irq 23, io mem 0xe5000000
ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
hda: max request size: 128KiB
hda: 78140160 sectors (40007 MB) w/1768KiB Cache, CHS=65535/16/63
hda: cache flushes not supported
hda: hda1 hda2 hda3 < hda5 hda6 hda7 hda8 hda9 hda10 > hda4
hdb: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
Attempting manual resume
swsusp: Marking nosave pages: 000000000009f000 - 0000000000100000
swsusp: Basic memory bitmaps created
swsusp: Basic memory bitmaps freed
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Linux agpgart interface v0.102
agpgart: Detected SiS chipset - id:1616
agpgart: AGP aperture is 64M @ 0xe8000000
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
input: Power Button (FF) as /class/input/input1
ACPI: Power Button (FF) [PWRF]
input: Lid Switch as /class/input/input2
ACPI: Lid Switch [LID]
input: Power Button (CM) as /class/input/input3
ACPI: Power Button (CM) [PWRB]
input: Sleep Button (CM) as /class/input/input4
ACPI: Sleep Button (CM) [SLPB]
ACPI: AC Adapter [AC] (on-line)
Asus Laptop ACPI Extras version 0.30
A2H model detected, supported
ACPI: Battery Slot [BAT0] (battery present)
sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0xe600
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Yenta: CardBus bridge found at 0000:00:0a.0 [1043:1764]
Yenta: adjusting diagnostic: 20 -> 60
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:0a.0, mfunc 0x00101d02, devctl 0x44
Yenta: ISA IRQ mask 0x0ef8, PCI irq 16
Socket status: 30000006
Real Time Clock Driver v1.12ac
input: PC Speaker as /class/input/input5
irda_init()
NET: Registered protocol family 23
Synaptics Touchpad, model: 1, fw: 4.6, id: 0x925ea1, caps: 0x80471b/0x0
input: SynPS/2 Synaptics TouchPad as /class/input/input6
parport_pc 00:09: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
ACPI: PCI Interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 17
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: clean.
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
intel8x0_measure_ac97_clock: measured 55270 usecs
intel8x0: clocking to 48000
ACPI: PCI Interrupt 0000:00:02.6[C] -> GSI 18 (level, low) -> IRQ 17
Adding 546168k swap on /dev/hda8. Priority:-1 extents:1 across:546168k
EXT3 FS on hda5, internal journal
loop: module loaded
usbserial: Unknown parameter `ircomm'
usbcore: registered new interface driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
usbcore: registered new interface driver usbserial_generic
drivers/usb/serial/usb-serial.c: USB Serial Driver core
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
fuse init (API version 7.9)
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda10, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda9, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
eth1: Media Link Off
No dock devices found.
lp0: using parport0 (interrupt-driven).
ppdev: user-space parallel port driver
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): eth1: link is not ready
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.9
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
usb 1-1: new full speed USB device using ohci_hcd and address 2
usb 1-1: configuration #1 chosen from 1 choice
usb 3-1: new low speed USB device using ohci_hcd and address 2
usb 3-1: configuration #1 chosen from 1 choice
usbcore: registered new interface driver hiddev
input: Logitech Optical USB Mouse as /class/input/input7
input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:03.2-1
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
usb 4-4: new high speed USB device using ehci_hcd and address 4
usb 4-4: configuration #1 chosen from 1 choice
Initializing USB Mass Storage driver...
scsi0 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 4
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 0:0:0:0: Direct-Access Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 0 CCS
Driver 'sd' needs updating - please use bus_type methods
sd 0:0:0:0: [sda] 7823360 512-byte hardware sectors (4006 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] 7823360 512-byte hardware sectors (4006 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
sd 0:0:0:0: [sda] Assuming drive cache: write through
sda: sda1
sd 0:0:0:0: [sda] Attached SCSI removable disk
eck289:/home/bartosz#Offline
#10 2008-07-06 07:35:15
Smike - Użytkownik
- Smike
- Użytkownik
- Zarejestrowany: 2007-08-20
Re: /dev/ttyUSB2 unrecognized option
Ten dmesg to chyba nie jest wykonany tuż po podłączeniu modemu? Ostatnie pozycje wskazują na jakieś urządzenie blokowe (pendrive??).
Ja proponuję: uruchom w terminalu/konsoli z prawami roota
Kod:
udevmonitor
. Następnie podłącz modem a to wszystko co wyświetli ten program prześlij tutaj. W czym jest problem żeby to połączenie internetowe zainstalować lub skonfigurować jeszcze raz?
Offline
#11 2008-07-06 08:20:40
fnmirk - Redaktor
- fnmirk
- Redaktor
- Zarejestrowany: 2008-02-19
Re: /dev/ttyUSB2 unrecognized option
Według mnie niepotrzebnie szukasz w dev tego urządzenia. Najpierw przedstaw wynik
Kod:
lsusb
jako root.
Ostatnio edytowany przez fnmirk (2008-07-06 08:23:39)
Offline
#12 2008-07-06 20:32:08
torpeda80 - Użytkownik
- torpeda80
- Użytkownik
- Zarejestrowany: 2007-03-28
Re: /dev/ttyUSB2 unrecognized option
Smile:
Kod:
prawnik:/home/bartosz# udevmonitor
udevmonitor will print the received events for:
UDEV the event which udev sends out after rule processing
UEVENT the kernel uevent
UEVENT[1215367452.597272] add /devices/pci0000:00/0000:00:03.0/usb1/1-1 (us
b)
UEVENT[1215367452.597363] add /class/usb_endpoint/usbdev1.2_ep00 (usb_endpo
int)
UEVENT[1215367452.603952] add /devices/pci0000:00/0000:00:03.0/usb1/1-1/1-1
:1.0 (usb)
UEVENT[1215367452.609095] add /class/usb_endpoint/usbdev1.2_ep83 (usb_endpo
int)
UEVENT[1215367452.609162] add /class/usb_endpoint/usbdev1.2_ep03 (usb_endpo
int)
UEVENT[1215367452.609177] add /class/usb_endpoint/usbdev1.2_ep85 (usb_endpo
int)
UEVENT[1215367452.609190] add /devices/pci0000:00/0000:00:03.0/usb1/1-1/1-1
:1.1 (usb)
UEVENT[1215367452.611305] add /class/usb_endpoint/usbdev1.2_ep84 (usb_endpo
int)
UEVENT[1215367452.611361] add /class/usb_endpoint/usbdev1.2_ep04 (usb_endpo
int)
UEVENT[1215367452.611375] add /devices/pci0000:00/0000:00:03.0/usb1/1-1/1-1
:1.2 (usb)
UEVENT[1215367452.614297] add /class/usb_endpoint/usbdev1.2_ep81 (usb_endpo
int)
UEVENT[1215367452.614342] add /class/usb_endpoint/usbdev1.2_ep82 (usb_endpo
int)
UEVENT[1215367452.614355] add /class/usb_endpoint/usbdev1.2_ep02 (usb_endpo
int)
UEVENT[1215367452.614368] add /class/usb_device/usbdev1.2 (usb_device)
UDEV [1215367452.620488] add /devices/pci0000:00/0000:00:03.0/usb1/1-1 (us
b)
UDEV [1215367452.639932] add /class/usb_endpoint/usbdev1.2_ep00 (usb_endpo
int)
UDEV [1215367452.642615] add /devices/pci0000:00/0000:00:03.0/usb1/1-1/1-1
:1.0 (usb)
UDEV [1215367452.651926] add /devices/pci0000:00/0000:00:03.0/usb1/1-1/1-1
:1.1 (usb)
UDEV [1215367452.674849] add /devices/pci0000:00/0000:00:03.0/usb1/1-1/1-1
:1.2 (usb)
UDEV [1215367452.797613] add /class/usb_endpoint/usbdev1.2_ep83 (usb_endpo
int)
UDEV [1215367452.840546] add /class/usb_endpoint/usbdev1.2_ep03 (usb_endpo
int)
UDEV [1215367452.850147] add /class/usb_endpoint/usbdev1.2_ep85 (usb_endpo
int)
UDEV [1215367452.889263] add /class/usb_endpoint/usbdev1.2_ep81 (usb_endpo
int)
UDEV [1215367452.907511] add /class/usb_endpoint/usbdev1.2_ep82 (usb_endpo
int)
UDEV [1215367452.920068] add /class/usb_endpoint/usbdev1.2_ep02 (usb_endpo
int)
UDEV [1215367452.933988] add /class/usb_endpoint/usbdev1.2_ep84 (usb_endpo
int)
UDEV [1215367452.937027] add /class/usb_endpoint/usbdev1.2_ep04 (usb_endpo
int)
UDEV [1215367452.989102] add /class/usb_device/usbdev1.2 (usb_device)
prawnik:/home/bartosz# udevmonitor
udevmonitor will print the received events for:
UDEV the event which udev sends out after rule processing
UEVENT the kernel uevent
UEVENT[1215367452.597272] add /devices/pci0000:00/0000:00:03.0/usb1/1-1 (us
b)
UEVENT[1215367452.597363] add /class/usb_endpoint/usbdev1.2_ep00 (usb_endpo
int)
UEVENT[1215367452.603952] add /devices/pci0000:00/0000:00:03.0/usb1/1-1/1-1
:1.0 (usb)
UEVENT[1215367452.609095] add /class/usb_endpoint/usbdev1.2_ep83 (usb_endpo
int)
UEVENT[1215367452.609162] add /class/usb_endpoint/usbdev1.2_ep03 (usb_endpo
int)
UEVENT[1215367452.609177] add /class/usb_endpoint/usbdev1.2_ep85 (usb_endpo
int)
UEVENT[1215367452.609190] add /devices/pci0000:00/0000:00:03.0/usb1/1-1/1-1
:1.1 (usb)
UEVENT[1215367452.611305] add /class/usb_endpoint/usbdev1.2_ep84 (usb_endpo
int)
UEVENT[1215367452.611361] add /class/usb_endpoint/usbdev1.2_ep04 (usb_endpo
int)
UEVENT[1215367452.611375] add /devices/pci0000:00/0000:00:03.0/usb1/1-1/1-1
:1.2 (usb)
UEVENT[1215367452.614297] add /class/usb_endpoint/usbdev1.2_ep81 (usb_endpo
int)
UEVENT[1215367452.614342] add /class/usb_endpoint/usbdev1.2_ep82 (usb_endpo
int)
UEVENT[1215367452.614355] add /class/usb_endpoint/usbdev1.2_ep02 (usb_endpo
int)
UEVENT[1215367452.614368] add /class/usb_device/usbdev1.2 (usb_device)
UDEV [1215367452.620488] add /devices/pci0000:00/0000:00:03.0/usb1/1-1 (us
b)
UDEV [1215367452.639932] add /class/usb_endpoint/usbdev1.2_ep00 (usb_endpo
int)
UDEV [1215367452.642615] add /devices/pci0000:00/0000:00:03.0/usb1/1-1/1-1
:1.0 (usb)
UDEV [1215367452.651926] add /devices/pci0000:00/0000:00:03.0/usb1/1-1/1-1
:1.1 (usb)
UDEV [1215367452.674849] add /devices/pci0000:00/0000:00:03.0/usb1/1-1/1-1
:1.2 (usb)
UDEV [1215367452.797613] add /class/usb_endpoint/usbdev1.2_ep83 (usb_endpo
int)
UDEV [1215367452.840546] add /class/usb_endpoint/usbdev1.2_ep03 (usb_endpo
int)
UDEV [1215367452.850147] add /class/usb_endpoint/usbdev1.2_ep85 (usb_endpo
int)
UDEV [1215367452.889263] add /class/usb_endpoint/usbdev1.2_ep81 (usb_endpo
bartosz@eck289:~$fnmirk:
prawnik:/home/bartosz# lsusb
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 002: ID 046d:c016 Logitech, Inc. M-UV69a/HP M-UV96 Optical Wheel Mouse
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 002: ID 0af0:6971 Option
Bus 001 Device 001: ID 0000:0000
prawnik:/home/bartosz#
Problem jest w tym ze nie mam w /dev/ ttyUSB zadnego. jak podpiolem modem do 2 kompa wsadzam modem to tworzy sie /dev/ttyUSBx, x=0,1,2.
W drugim kompie mam takie urzadzenie a w starym nie. tym samym nie mam sieci w starym bo nie widzi /dev/ttyUSB2 przynamiej pppd tak woła.. na dwoch kompach lenny siedzi. nie wiem co zrobilem ze popsulem komp1.
Offline
#13 2008-07-06 21:42:12
fnmirk - Redaktor
- fnmirk
- Redaktor
- Zarejestrowany: 2008-02-19
Re: /dev/ttyUSB2 unrecognized option
Czy lsusb podobne informacje pokazuje na obydwu komputerach przy podpiętym modemie.
Nie podałeś ważnej informacji modem jest zasilany z portu USB czy ma własny zasilacz (pytałem o pobór prądu przez modem).
Masz dwa komputery i urządzenie, które na jednym komputerze działa. Na drugim nie.
Pierwsza rzecz, to robisz porównanie oprogramowania na jednym i drugim komputerze, jakie jest potrzebne do uruchomienia modemu.
Pomocne polecenia
Kod:
lsusb lsmod dpkg -l | grep usb
Porównaj wersje kernela. Na jednym i drugim komputerze:
zainstalowane:
Kod:
dpkg -l | grep $(uname -r)
aktualnie używane:
Kod:
uname -r
Masz większe możliwości ponieważ dysponujesz fizycznie urządzeniem.
W ostateczności możesz porównać całość wyników dpkg -l>programy.txt przekierowując wynik do pliku.
Offline
#14 2008-07-06 23:09:46
Smike - Użytkownik
- Smike
- Użytkownik
- Zarejestrowany: 2007-08-20
Re: /dev/ttyUSB2 unrecognized option
W załączonych listingach z udevmonitor brak jest informacji o ładowanych modułach do obsługi podłączanego
modemu. Których to możnaby się przekonać wykonując ten sam manewr na drugim komputerze.
Przykładowe wpisy po podłączeniu modemu SpeedTouch 330 i telefonu komórkowego.
UEVENT[1215377619.870720] add /module/cdc_acm (module)
UDEV [1215377619.872546] add /module/cdc_acm (module)
UEVENT[1215377697.389899] add /module/atm (module)
UDEV [1215377697.391953] add /module/atm (module)
UEVENT[1215377697.393366] add /class/atm (class)
UDEV [1215377697.403161] add /class/atm (class)
UEVENT[1215377697.413053] add /module/usbatm (module)
UDEV [1215377697.420066] add /module/usbatm (module)
UEVENT[1215377697.421877] add /module/speedtch (module)
UDEV [1215377697.428201] add /module/speedtch (module)
Poprawka (przepraszam):
To info o modułach pojawia się przy pierwszym podłączeniu sprzętu po uruchomieniu systemu. Jeśli te listingi pokazują kolejne podłączenia to brak tej informacji jest prawidłowy.
Ostatnio edytowany przez Smike (2008-07-07 06:36:36)
Offline
#15 2008-07-07 02:49:35
fnmirk - Redaktor
- fnmirk
- Redaktor
- Zarejestrowany: 2008-02-19
Re: /dev/ttyUSB2 unrecognized option
torpeda80 twój kierunek postępowania powinien być taki porównać wersje kernela i sprawdzić dostępne moduły.
Modem nie posiada jakiś danych dla udev. Na komputerze masz jakąś starszą wersję systemu.
Mnie coś trochę rozjaśniło sytuację przejrzenie poniższych opisów:
http://www.forum.ubuntu.pl/showthread.php?t=52873
http://wwwu.uni-klu.ac.at/agebhard/GlobeSurfer/
Wydaje się mnie, że sprawę załatwi nowszy kernel.
Edit:
Masz w ogóle udev zainstalowany na tym komputerze?
Kod:
dpkg -l | grep udev
Moja sposzczegawczość jest godna szacunku odwołuję pytanie o udev.
Ostatnio edytowany przez fnmirk (2008-07-07 06:48:24)
Offline
#16 2008-07-07 12:20:03
torpeda80 - Użytkownik
- torpeda80
- Użytkownik
- Zarejestrowany: 2007-03-28
Re: /dev/ttyUSB2 unrecognized option
porównałem pliki i otzrymałem co następuje:
komp1 i komp2 wyszedł ten sam wynik:
1.#uname -r:
2.6.24-1-686
2. dpkg -l | grep $(uname -r):
ii linux-image-2.6.24-1-686 2.6.24-7 Linux 2.6.24 image on PPro/Celeron/PII/PIII/
3. dpkg -l | grep usb:
ii libusb-0.1-4 2:0.1.12-11 userspace USB programming library
ii usbutils 0.73-8 Linux USB utilities
ii xserver-xorg-video-sisusb 1:0.9.0-1 X.Org X server -- SiS USB display driver
4. lsusb:
4.1.dla komp1 - ten nie działajacy
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 002: ID 046d:c016 Logitech, Inc. M-UV69a/HP M-UV96 Optical Wheel Mouse
Bus 003 Device 001: ID 0000:0000
Bus 001 Device 002: ID 0af0:6971 Option
Bus 001 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
4.2. dla kompa2
Bus 005 Device 005: ID 08ff:2580 AuthenTec, Inc. AES2501 Fingerprint Sensor
Bus 005 Device 002: ID 0424:2503 Standard Microsystems Corp. USB 2.0 Hub
Bus 005 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 003: ID 04d9:0499 Holtek Semiconductor, Inc.
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 003: ID 0af0:6971 Option
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
5. lsmod
5.1 komp 1
Kod:
Module Size Used by rfcomm 36784 5 l2cap 22880 9 rfcomm bluetooth 53636 4 rfcomm,l2cap ipv6 240836 12 ppdev 8804 0 lp 11076 0 sbs 14376 0 container 4864 0 dock 10384 0 sbshc 6848 1 sbs video 18672 0 output 3744 1 video acpi_cpufreq 9260 0 speedstep_lib 5348 0 cpufreq_powersave 1856 0 cpufreq_ondemand 8492 1 cpufreq_conservative 7560 0 cpufreq_userspace 4260 0 cpufreq_stats 5184 0 freq_table 4512 3 acpi_cpufreq,cpufreq_ondemand,cpufreq_stats fuse 45204 5 dm_snapshot 16964 0 dm_mirror 21600 0 dm_mod 55812 2 dm_snapshot,dm_mirror usbserial 32200 0 firewire_sbp2 14252 0 loop 16804 0 snd_intel8x0m 16844 0 joydev 11360 0 pcmcia 37036 0 firmware_class 9312 1 pcmcia snd_intel8x0 32028 1 snd_ac97_codec 92932 2 snd_intel8x0m,snd_intel8x0 ac97_bus 2176 1 snd_ac97_codec snd_pcm_oss 38272 0 snd_mixer_oss 15296 2 snd_pcm_oss irtty_sir 8096 0 snd_pcm 71780 4 snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss sir_dev 15460 1 irtty_sir parport_pc 33668 1 parport 34280 3 ppdev,lp,parport_pc snd_seq_dummy 3780 0 irda 174236 2 irtty_sir,sir_dev serio_raw 6660 0 crc_ccitt 2176 1 irda pcspkr 3200 0 rtc 13052 0 psmouse 36464 0 snd_seq_oss 29472 0 snd_seq_midi 8160 0 yenta_socket 24844 1 rsrc_nonstatic 11872 1 yenta_socket pcmcia_core 36884 3 pcmcia,yenta_socket,rsrc_nonstatic snd_rawmidi 22624 1 snd_seq_midi snd_seq_midi_event 6976 2 snd_seq_oss,snd_seq_midi snd_seq 46544 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event snd_timer 21092 2 snd_pcm,snd_seq snd_seq_device 7820 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq snd 48612 11 snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 7552 2 snd snd_page_alloc 10056 3 snd_intel8x0m,snd_intel8x0,snd_pcm i2c_sis96x 5092 0 i2c_core 22432 1 i2c_sis96x shpchp 31028 0 pci_hotplug 27712 1 shpchp led_class 5156 0 battery 13572 0 asus_acpi 15900 0 ac 6116 0 button 8432 0 sis_agp 9060 1 agpgart 31688 1 sis_agp evdev 11104 6 ext3 122920 5 jbd 43732 1 ext3 mbcache 8288 1 ext3 usbhid 28096 0 hid 34272 1 usbhid ide_cd 36224 0 cdrom 32512 1 ide_cd ide_disk 15648 9 ata_generic 7428 0 pata_sis 13860 0 libata 144624 2 ata_generic,pata_sis scsi_mod 141164 2 firewire_sbp2,libata ehci_hcd 32524 0 ohci_hcd 21988 0 sis900 21536 0 mii 5312 1 sis900 sis5513 7556 0 [permanent] usbcore 133004 5 usbserial,usbhid,ehci_hcd,ohci_hcd generic 4388 0 [permanent] ide_core 108292 4 ide_cd,ide_disk,sis5513,generic firewire_ohci 17760 0 firewire_core 39232 2 firewire_sbp2,firewire_ohci crc_itu_t 2176 1 firewire_core thermal 16028 0 processor 36552 3 acpi_cpufreq,thermal fan 4772 0
5.2 komp2
Kod:
Module Size Used by ppp_deflate 5696 0 zlib_deflate 17752 1 ppp_deflate zlib_inflate 14560 1 ppp_deflate bsd_comp 5504 0 ppp_async 11104 0 crc_ccitt 2176 1 ppp_async ipv6 240836 10 ppp_generic 26196 3 ppp_deflate,bsd_comp,ppp_async slhc 5920 1 ppp_generic i915 22048 2 drm 74132 3 i915 rfcomm 36784 3 l2cap 22880 9 rfcomm bluetooth 53636 4 rfcomm,l2cap sbs 14376 0 sbshc 6848 1 sbs dock 10384 0 cpufreq_ondemand 8492 0 cpufreq_conservative 7560 0 cpufreq_stats 5184 0 freq_table 4512 2 cpufreq_ondemand,cpufreq_stats cpufreq_userspace 4260 0 cpufreq_powersave 1856 0 dm_snapshot 16964 0 dm_mirror 21600 0 dm_mod 55812 2 dm_snapshot,dm_mirror usbserial 32200 0 firewire_sbp2 14252 0 loop 16804 0 joydev 11360 0 snd_hda_intel 275392 0 pcmcia 37036 0 snd_pcm_oss 38272 0 snd_pcm 71780 2 snd_hda_intel,snd_pcm_oss snd_mixer_oss 15296 1 snd_pcm_oss iwl3945 84712 0 snd_seq_dummy 3780 0 firmware_class 9312 2 pcmcia,iwl3945 iTCO_wdt 11268 0 sdhci 16836 0 serio_raw 6660 0 mac80211 114380 1 iwl3945 tifm_7xx1 7360 0 tpm_infineon 8712 0 tpm 15072 1 tpm_infineon snd_seq_oss 29472 0 yenta_socket 24844 1 rsrc_nonstatic 11872 1 yenta_socket tpm_bios 6912 1 tpm rtc 13052 0 parport_pc 33668 0 parport 34280 1 parport_pc pcspkr 3200 0 mmc_core 47300 1 sdhci psmouse 36464 0 snd_seq_midi_event 6976 1 snd_seq_oss snd_seq 46544 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event snd_timer 21092 2 snd_pcm,snd_seq snd_seq_device 7820 3 snd_seq_dummy,snd_seq_oss,snd_seq cfg80211 13480 1 mac80211 tifm_core 9956 1 tifm_7xx1 pcmcia_core 36884 3 pcmcia,yenta_socket,rsrc_nonstatic snd 48612 8 snd_hda_intel,snd_pcm_oss,snd_pcm,snd_mixer_oss,snd_seq_oss,snd_seq,snd_timer,snd_seq_device container 4864 0 soundcore 7552 1 snd video 18672 0 output 3744 1 video battery 13572 0 ac 6116 0 snd_page_alloc 10056 2 snd_hda_intel,snd_pcm button 8432 0 intel_agp 23412 1 agpgart 31688 3 drm,intel_agp evdev 11104 5 ext3 122920 5 jbd 43732 1 ext3 mbcache 8288 1 ext3 ide_cd 36224 0 cdrom 32512 1 ide_cd generic 4388 0 [permanent] sd_mod 27200 7 usbhid 28096 0 hid 34272 1 usbhid piix 7492 0 [permanent] ide_core 108292 3 ide_cd,generic,piix firewire_ohci 17760 0 tg3 88996 0 firewire_core 39232 2 firewire_sbp2,firewire_ohci crc_itu_t 2176 1 firewire_core ahci 26212 6 ehci_hcd 32524 0 ata_generic 7428 0 libata 144624 2 ahci,ata_generic scsi_mod 141164 3 firewire_sbp2,sd_mod,libata uhci_hcd 23376 0 usbcore 133004 5 usbserial,usbhid,ehci_hcd,uhci_hcd thermal 16028 0 processor 36552 1 thermal fan 4772 0
Mam najnowsze chyba jadro z repo. co do lsmod to prosze o wskazanie co powinienem doladowac bo za bardzo nie orjentuje sie co powinno sie tam znajdowac.
Ostatnio edytowany przez torpeda80 (2008-07-07 12:21:16)
Offline
#17 2008-07-07 14:50:28
Smike - Użytkownik
- Smike
- Użytkownik
- Zarejestrowany: 2007-08-20
Re: /dev/ttyUSB2 unrecognized option
torpeda80 napisał(-a):
Mam najnowsze chyba jadro z repo. co do lsmod to prosze o wskazanie co powinienem doladowac bo za bardzo nie orjentuje sie co powinno sie tam znajdowac.
Byleś tam ?
http://www.bez-kabli.pl/viewtopic.php?p=79432#79432
Jeżeli w ogóle to jest problem z modułami bo usbserial jest na obu twoich komputerach.
Offline
#18 2008-07-07 15:00:06
torpeda80 - Użytkownik
- torpeda80
- Użytkownik
- Zarejestrowany: 2007-03-28
Re: /dev/ttyUSB2 unrecognized option
bylem
wlasnie z tej instrukcji skorzystalem i mialem na obu komputerach internet. problem w tym, że teraz na kompie 1 = starym udev nie towrzy mi wogóle w katalogu /dev/
portu ttyUSB*. Nie powstaje mi to urzadzenie jak wloże moj modem (modem usb) do portu. Na drugim kompie wkladam modem i w dev tworzy sie ttyUSB0, ttyUSB1, ttyUSB2. i pppd odpala mi siec.
nie wiem co zrobilem ale nie tworzy mi urzadzen ttyUSB*.
Offline
#19 2008-07-09 10:43:08
torpeda80 - Użytkownik
- torpeda80
- Użytkownik
- Zarejestrowany: 2007-03-28
Re: /dev/ttyUSB2 unrecognized option
juz po formacie - teraz juz tylko backup i bawimy sie dalej.
dziekuje za wszyskie uwagi i wskazówki. pozdrawiam
Offline