Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!

Ogłoszenie

Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.

#1  2006-07-01 17:30:16

  rzuku - Użytkownik

rzuku
Użytkownik
Zarejestrowany: 2005-08-13

CUPS --> error:client-error-not-possible

Hello all !!!

Mam mały problemik z cupsem. Pracuje na Debianie Sarge 3.1. Wyglada on następująco. Instaluje drukareczke marki Lexmark model Z31 komendą:
/usr/sbin/lpadmin -p LexmarkZ31 -E -v parallel:/dev/lp0 -m lexmark.ppd

(za literówki przepraszam;) instalacja przebiega bezproblemowo. Jednak gdy chce coś wydrukowac np. strone testową to cisza, gdy wchode prze localhost:631 do Job i daje restart zadania to wyskakuje mi: Error: client-error-not-possible. Siedze już nad tym kilka dni. Przegladnąłem różne fora, poruszałem się zgodnie z wskazówkami, ale drukarka jak milczy tak milczy. Może któryś z Was sie spotkał z takim czymś i mógłby mnie chociaż naprowadzić poczęści.

Pozdrawiam,
rZuku$

Offline

 

#2  2006-07-01 17:54:41

  czadman - Bicycle repairman

czadman
Bicycle repairman
Skąd: Wrocław
Zarejestrowany: 2005-07-08

Re: CUPS --> error:client-error-not-possible

Może być wiele przyczyn.
Usuń wszystkie zadania i zapodaj sobie komendę:

Kod:

tail -f /var/log/cups/error_log

Następnie spróbuj coś wydrukować i wklej to co wyskoczy na konsoli. Być może trzeba będzie bardziej szczegółowych logów. Przestaw wtedy parametr LogLevel w pliku cupsd.conf na info albo debug i zrestartuj cupsys.


http://www.debian.org/logos/openlogo-nd-50.png

Offline

 

#3  2006-07-02 02:19:49

  rzuku - Użytkownik

rzuku
Użytkownik
Zarejestrowany: 2005-08-13

Re: CUPS --> error:client-error-not-possible

W logu mam takie coś po tych czynnościach co mi kazałeś zrobić:

I [02/Jul/2006:02:09:49 +0200] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=4608)
I [02/Jul/2006:02:09:49 +0200] Adding start banner page "none" to job 7.
I [02/Jul/2006:02:09:49 +0200] Adding end banner page "none" to job 7.
I [02/Jul/2006:02:09:49 +0200] Job 7 queued on 'LexmarkZ31' by 'root'.
I [02/Jul/2006:02:09:49 +0200] Started filter /usr/lib/cups/filter/pstops (PID 4609) for job 7.
I [02/Jul/2006:02:09:49 +0200] Started filter /usr/lib/cups/filter/foomatic-rip (PID 4610) for job 7.
I [02/Jul/2006:02:09:49 +0200] Started backend /usr/lib/cups/backend/parallel (PID 4611) for job 7.
E [02/Jul/2006:02:09:49 +0200] PID 4610 stopped with status 22!
I [02/Jul/2006:02:09:49 +0200] Hint: Try setting the LogLevel to "debug" to find out more.
I [02/Jul/2006:02:09:50 +0200] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=4612)
I [02/Jul/2006:02:09:54 +0200] Started "/usr/lib/cups/cgi-bin/jobs.cgi" (pid=4613)
I [02/Jul/2006:02:09:55 +0200] Started "/usr/lib/cups/cgi-bin/jobs.cgi" (pid=4614)
I [02/Jul/2006:02:09:57 +0200] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=4615)
I [02/Jul/2006:02:10:13 +0200] Started "/usr/lib/cups/cgi-bin/jobs.cgi" (pid=4616)
I [02/Jul/2006:02:10:15 +0200] Started "/usr/lib/cups/cgi-bin/jobs.cgi" (pid=4617)
I [02/Jul/2006:02:10:17 +0200] Started "/usr/lib/cups/cgi-bin/jobs.cgi" (pid=4618)
E [02/Jul/2006:02:10:17 +0200] restart_job: job #7 cannot be restarted - no files!

Wnioskuje, że mu jakiegoś pliku brakuje, ale jakiego?? może trzeba doinstalwoać jakiś pakiet. Ja już nie wiem:/

Offline

 

#4  2006-07-02 08:28:18

  czadman - Bicycle repairman

czadman
Bicycle repairman
Skąd: Wrocław
Zarejestrowany: 2005-07-08

Re: CUPS --> error:client-error-not-possible

Przestaw poziom logowania na debug i wklej po powtórce, będzie tego więcej, ale więcej będzie także informacji.


http://www.debian.org/logos/openlogo-nd-50.png

Offline

 

#5  2006-07-02 10:47:06

  rzuku - Użytkownik

rzuku
Użytkownik
Zarejestrowany: 2005-08-13

Re: CUPS --> error:client-error-not-possible

Debug ?? nigdy takiego czegoś nie robiłem. Może jakaś instrukcja ?

Offline

 

#6  2006-07-02 13:37:15

  czadman - Bicycle repairman

czadman
Bicycle repairman
Skąd: Wrocław
Zarejestrowany: 2005-07-08

Re: CUPS --> error:client-error-not-possible

Debug ?? nigdy takiego czegoś nie robiłem. Może jakaś instrukcja ?

Chodzi o to, że program loguje domyślnie tylko ogólne info, że coś się dzieje nie tak. Aby zdiagnozować problem szerzej można poziom logowania przestawić w bardziej gadatliwy tryb, ująłbym to jako zbyt wylewny na co dzień.
Z konta root otwierasz plik /etc/cups/cupsd.conf, znajdujesz linię z zawartością:

LogLevel warning

albo

LogLevel info

i zmieniasz na

LogLevel debug

Następnie restartujesz cupsa:

/etc/init.d/cupsys restart

i od teraz cupsd będzie bardzo szczegółowo logował swoje akcje.


http://www.debian.org/logos/openlogo-nd-50.png

Offline

 

#7  2006-07-02 14:12:49

  rzuku - Użytkownik

rzuku
Użytkownik
Zarejestrowany: 2005-08-13

Re: CUPS --> error:client-error-not-possible

No zrobiłem. Faktycznie dokładniejsze, ale teraz to już wogole nie wiem o co chodzi i skąd się bierze ten bład :/
Mój log:
I [02/Jul/2006:14:07:59 +0200] Listening to 0:631
D [02/Jul/2006:14:07:59 +0200] AddLocation: added location '/'
D [02/Jul/2006:14:07:59 +0200] AllowIP: / allow 00000000/00000000
D [02/Jul/2006:14:07:59 +0200] AddLocation: added location '/jobs'
D [02/Jul/2006:14:07:59 +0200] AddLocation: added location '/admin'
D [02/Jul/2006:14:07:59 +0200] AllowIP: /admin allow 00000000/00000000
I [02/Jul/2006:14:07:59 +0200] Loaded configuration file "/etc/cups/cupsd.conf"
I [02/Jul/2006:14:07:59 +0200] Configured for up to 100 clients.
I [02/Jul/2006:14:07:59 +0200] Allowing up to 100 client connections per host.
I [02/Jul/2006:14:07:59 +0200] Full reload is required.
D [02/Jul/2006:14:07:59 +0200] LoadAllPrinters: Loading printer LexmarkZ31...
D [02/Jul/2006:14:07:59 +0200] LoadDevices: Added device "smb"...
D [02/Jul/2006:14:07:59 +0200] LoadDevices: Added device "ipp"...
D [02/Jul/2006:14:07:59 +0200] LoadDevices: Added device "http"...
D [02/Jul/2006:14:07:59 +0200] LoadDevices: Added device "lpd"...
D [02/Jul/2006:14:07:59 +0200] LoadDevices: Added device "parallel:/dev/lp0"...
D [02/Jul/2006:14:07:59 +0200] LoadDevices: Added device "socket"...
D [02/Jul/2006:14:07:59 +0200] LoadDevices: Added device "usb:/dev/usb/lp0"...
D [02/Jul/2006:14:07:59 +0200] LoadDevices: Added device "usb:/dev/usb/lp1"...
D [02/Jul/2006:14:07:59 +0200] LoadDevices: Added device "usb:/dev/usb/lp2"...
D [02/Jul/2006:14:07:59 +0200] LoadDevices: Added device "usb:/dev/usb/lp3"...
D [02/Jul/2006:14:07:59 +0200] LoadDevices: Added device "usb:/dev/usb/lp4"...
D [02/Jul/2006:14:07:59 +0200] LoadDevices: Added device "usb:/dev/usb/lp5"...
D [02/Jul/2006:14:07:59 +0200] LoadDevices: Added device "usb:/dev/usb/lp6"...
D [02/Jul/2006:14:07:59 +0200] LoadDevices: Added device "usb:/dev/usb/lp7"...
D [02/Jul/2006:14:07:59 +0200] LoadDevices: Added device "usb:/dev/usb/lp8"...
D [02/Jul/2006:14:07:59 +0200] LoadDevices: Added device "usb:/dev/usb/lp9"...
D [02/Jul/2006:14:07:59 +0200] LoadDevices: Added device "usb:/dev/usb/lp10"...
D [02/Jul/2006:14:07:59 +0200] LoadDevices: Added device "usb:/dev/usb/lp11"...
D [02/Jul/2006:14:07:59 +0200] LoadDevices: Added device "usb:/dev/usb/lp12"...
D [02/Jul/2006:14:07:59 +0200] LoadDevices: Added device "usb:/dev/usb/lp13"...
D [02/Jul/2006:14:07:59 +0200] LoadDevices: Added device "usb:/dev/usb/lp14"...
D [02/Jul/2006:14:07:59 +0200] LoadDevices: Added device "usb:/dev/usb/lp15"...
D [02/Jul/2006:14:07:59 +0200] LoadDevices: Added device "cups-pdf:/"...
D [02/Jul/2006:14:07:59 +0200] LoadDevices: Added device "epson:/dev/lp0"...
D [02/Jul/2006:14:07:59 +0200] LoadDevices: Added device "canon:/dev/lp0"...
I [02/Jul/2006:14:07:59 +0200] LoadPPDs: Read "/etc/cups/ppds.dat", 251 PPDs...
I [02/Jul/2006:14:07:59 +0200] LoadPPDs: No new or changed PPDs...
D [02/Jul/2006:14:07:59 +0200] LoadAllJobs: Scanning /var/spool/cups...
D [02/Jul/2006:14:07:59 +0200] LoadAllJobs: Loading attributes for job 8...
I [02/Jul/2006:14:07:59 +0200] Full reload complete.
D [02/Jul/2006:14:07:59 +0200] StartListening: NumListeners=1
D [02/Jul/2006:14:07:59 +0200] StartListening: address=00000000 port=631
D [02/Jul/2006:14:07:59 +0200] ResumeListening: setting input bits...
D [02/Jul/2006:14:08:18 +0200] AcceptClient: 5 from 192.168.1.2:631.
D [02/Jul/2006:14:08:18 +0200] ReadClient: 5 GET / HTTP/1.1
D [02/Jul/2006:14:08:18 +0200] SendFile: 5 file=6
D [02/Jul/2006:14:08:18 +0200] CloseClient: 5
D [02/Jul/2006:14:08:18 +0200] AcceptClient: 5 from 192.168.1.2:631.
D [02/Jul/2006:14:08:18 +0200] ReadClient: 5 GET /cups.css HTTP/1.1
D [02/Jul/2006:14:08:18 +0200] SendFile: 5 file=6
D [02/Jul/2006:14:08:18 +0200] ReadClient: 5 GET /images/navbar.gif HTTP/1.1
D [02/Jul/2006:14:08:18 +0200] SendFile: 5 file=6
D [02/Jul/2006:14:08:18 +0200] CloseClient: 5
D [02/Jul/2006:14:08:20 +0200] AcceptClient: 5 from 192.168.1.2:631.
D [02/Jul/2006:14:08:20 +0200] ReadClient: 5 GET /printers HTTP/1.1
D [02/Jul/2006:14:08:20 +0200] CGI /usr/lib/cups/cgi-bin/printers.cgi started - PID = 12861
I [02/Jul/2006:14:08:20 +0200] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=12861)
D [02/Jul/2006:14:08:20 +0200] SendCommand: 5 file=8
D [02/Jul/2006:14:08:21 +0200] AcceptClient: 6 from localhost:631.
D [02/Jul/2006:14:08:21 +0200] ReadClient: 6 POST / HTTP/1.1
D [02/Jul/2006:14:08:21 +0200] ProcessIPPRequest: 6 status_code=1
D [02/Jul/2006:14:08:21 +0200] ReadClient: 6 POST / HTTP/1.1
D [02/Jul/2006:14:08:21 +0200] ProcessIPPRequest: 6 status_code=1
D [02/Jul/2006:14:08:21 +0200] CloseClient: 6
D [02/Jul/2006:14:08:21 +0200] ReadClient: 5 GET /images/right.gif HTTP/1.1
D [02/Jul/2006:14:08:21 +0200] SendFile: 5 file=6
D [02/Jul/2006:14:08:21 +0200] AcceptClient: 8 from 192.168.1.2:631.
D [02/Jul/2006:14:08:21 +0200] ReadClient: 8 GET /images/left.gif HTTP/1.1
D [02/Jul/2006:14:08:21 +0200] SendFile: 8 file=9
D [02/Jul/2006:14:08:21 +0200] AcceptClient: 10 from 192.168.1.2:631.
D [02/Jul/2006:14:08:21 +0200] AcceptClient: 11 from 192.168.1.2:631.
D [02/Jul/2006:14:08:21 +0200] AcceptClient: 6 from 192.168.1.2:631.
D [02/Jul/2006:14:08:21 +0200] AcceptClient: 9 from 192.168.1.2:631.
D [02/Jul/2006:14:08:21 +0200] ReadClient: 5 GET /images/modify-printer.gif HTTP/1.1
D [02/Jul/2006:14:08:21 +0200] SendFile: 5 file=12
D [02/Jul/2006:14:08:21 +0200] ReadClient: 10 GET /images/printer-idle.gif HTTP/1.1
D [02/Jul/2006:14:08:21 +0200] SendFile: 10 file=13
D [02/Jul/2006:14:08:21 +0200] ReadClient: 11 GET /images/print-test-page.gif HTTP/1.1
D [02/Jul/2006:14:08:21 +0200] SendFile: 11 file=12
D [02/Jul/2006:14:08:21 +0200] ReadClient: 6 GET /images/stop-printer.gif HTTP/1.1
D [02/Jul/2006:14:08:21 +0200] SendFile: 6 file=13
D [02/Jul/2006:14:08:21 +0200] ReadClient: 9 GET /images/reject-jobs.gif HTTP/1.1
D [02/Jul/2006:14:08:21 +0200] SendFile: 9 file=14
D [02/Jul/2006:14:08:21 +0200] ReadClient: 8 GET /images/config-printer.gif HTTP/1.1
D [02/Jul/2006:14:08:21 +0200] SendFile: 8 file=15
D [02/Jul/2006:14:08:21 +0200] ReadClient: 5 GET /images/delete-printer.gif HTTP/1.1
D [02/Jul/2006:14:08:21 +0200] SendFile: 5 file=12
D [02/Jul/2006:14:08:21 +0200] ReadClient: 10 GET /images/set-as-default.gif HTTP/1.1
D [02/Jul/2006:14:08:21 +0200] SendFile: 10 file=13
D [02/Jul/2006:14:08:21 +0200] ReadClient: 11 GET /images/add-printer.gif HTTP/1.1
D [02/Jul/2006:14:08:21 +0200] SendFile: 11 file=14
D [02/Jul/2006:14:08:22 +0200] ReadClient: 6 GET /printers/LexmarkZ31?op=print-test-page HTTP/1.1
D [02/Jul/2006:14:08:22 +0200] CGI /usr/lib/cups/cgi-bin/printers.cgi started - PID = 12862
I [02/Jul/2006:14:08:22 +0200] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=12862)
D [02/Jul/2006:14:08:22 +0200] SendCommand: 6 file=13
D [02/Jul/2006:14:08:22 +0200] AcceptClient: 12 from localhost:631.
D [02/Jul/2006:14:08:22 +0200] ReadClient: 12 POST /printers/LexmarkZ31 HTTP/1.1
D [02/Jul/2006:14:08:22 +0200] print_job: request file type is application/postscript.
D [02/Jul/2006:14:08:22 +0200] check_quotas: requesting-user-name = ''
D [02/Jul/2006:14:08:22 +0200] print_job: requesting-user-name = ''
D [02/Jul/2006:14:08:22 +0200] Adding default job-sheets values "none,none"...
I [02/Jul/2006:14:08:22 +0200] Adding start banner page "none" to job 9.
I [02/Jul/2006:14:08:22 +0200] Adding end banner page "none" to job 9.
I [02/Jul/2006:14:08:22 +0200] Job 9 queued on 'LexmarkZ31' by ''.
D [02/Jul/2006:14:08:22 +0200] Job 9 hold_until = 0
D [02/Jul/2006:14:08:22 +0200] StartJob(9, 0x80adf88)
D [02/Jul/2006:14:08:22 +0200] StartJob() id = 9, file = 0/1
D [02/Jul/2006:14:08:22 +0200] job-sheets=none,none
D [02/Jul/2006:14:08:22 +0200] banner_page = 0
D [02/Jul/2006:14:08:22 +0200] StartJob: argv = "LexmarkZ31","9","","Test Page","1","","/var/spool/cups/d00009-001"
D [02/Jul/2006:14:08:22 +0200] StartJob: envp[0]="PATH=/usr/lib/cups/filter:/bin:/usr/bin"
D [02/Jul/2006:14:08:22 +0200] StartJob: envp[1]="SOFTWARE=CUPS/1.1"
D [02/Jul/2006:14:08:22 +0200] StartJob: envp[2]="USER=root"
D [02/Jul/2006:14:08:22 +0200] StartJob: envp[3]="CHARSET=iso-8859-1"
D [02/Jul/2006:14:08:22 +0200] StartJob: envp[4]="LANG=en"
D [02/Jul/2006:14:08:22 +0200] StartJob: envp[5]="TZ=Europe/Warsaw"
D [02/Jul/2006:14:08:22 +0200] StartJob: envp[6]="PPD=/etc/cups/ppd/LexmarkZ31.ppd"
D [02/Jul/2006:14:08:22 +0200] StartJob: envp[7]="CUPS_SERVERROOT=/etc/cups"
D [02/Jul/2006:14:08:22 +0200] StartJob: envp[8]="RIP_MAX_CACHE=8m"
D [02/Jul/2006:14:08:22 +0200] StartJob: envp[9]="TMPDIR=/var/spool/cups/tmp"
D [02/Jul/2006:14:08:22 +0200] StartJob: envp[10]="CONTENT_TYPE=application/postscript"
D [02/Jul/2006:14:08:22 +0200] StartJob: envp[11]="DEVICE_URI=parallel:/dev/lp0"
D [02/Jul/2006:14:08:22 +0200] StartJob: envp[12]="PRINTER=LexmarkZ31"
D [02/Jul/2006:14:08:22 +0200] StartJob: envp[13]="CUPS_DATADIR=/usr/share/cups"
D [02/Jul/2006:14:08:22 +0200] StartJob: envp[14]="CUPS_FONTPATH=/usr/share/cups/fonts"
D [02/Jul/2006:14:08:22 +0200] StartJob: envp[15]="CUPS_SERVER=localhost"
D [02/Jul/2006:14:08:22 +0200] StartJob: envp[16]="IPP_PORT=631"
D [02/Jul/2006:14:08:22 +0200] StartJob: statusfds = [ 14 15 ]
D [02/Jul/2006:14:08:22 +0200] StartJob: filterfds[1] = [ 16 -1 ]
D [02/Jul/2006:14:08:22 +0200] StartJob: filter = "/usr/lib/cups/filter/pstops"
D [02/Jul/2006:14:08:22 +0200] StartJob: filterfds[0] = [ 17 18 ]
D [02/Jul/2006:14:08:22 +0200] start_process("/usr/lib/cups/filter/pstops", 0xbfff0070, 0xbffef3e0, 16, 18, 15)
I [02/Jul/2006:14:08:22 +0200] Started filter /usr/lib/cups/filter/pstops (PID 12863) for job 9.
D [02/Jul/2006:14:08:22 +0200] StartJob: filter = "/usr/lib/cups/filter/foomatic-rip"
D [02/Jul/2006:14:08:22 +0200] StartJob: filterfds[1] = [ 16 19 ]
D [02/Jul/2006:14:08:22 +0200] start_process("/usr/lib/cups/filter/foomatic-rip", 0xbfff0070, 0xbffef3e0, 17, 19, 15)
I [02/Jul/2006:14:08:22 +0200] Started filter /usr/lib/cups/filter/foomatic-rip (PID 12864) for job 9.
D [02/Jul/2006:14:08:22 +0200] StartJob: backend = "/usr/lib/cups/backend/parallel"
D [02/Jul/2006:14:08:22 +0200] StartJob: filterfds[0] = [ -1 17 ]
D [02/Jul/2006:14:08:22 +0200] start_process("/usr/lib/cups/backend/parallel", 0xbfff0070, 0xbffef3e0, 16, 17, 15)
I [02/Jul/2006:14:08:22 +0200] Started backend /usr/lib/cups/backend/parallel (PID 12865) for job 9.
D [02/Jul/2006:14:08:22 +0200] ProcessIPPRequest: 12 status_code=0
E [02/Jul/2006:14:08:22 +0200] PID 12864 stopped with status 22!
D [02/Jul/2006:14:08:22 +0200] [Job 9] /usr/lib/cups/filter/foomatic-rip: Nie ma takiego pliku ani katalogu
D [02/Jul/2006:14:08:22 +0200] CloseClient: 12
D [02/Jul/2006:14:08:22 +0200] [Job 9] Page = 595x842; 0,0 to 595,842
D [02/Jul/2006:14:08:22 +0200] [Job 9] slowcollate=0, slowduplex=0, sloworder=0
D [02/Jul/2006:14:08:22 +0200] [Job 9] 0 %%BoundingBox: 0 0 612 792
D [02/Jul/2006:14:08:22 +0200] [Job 9] 0 %%Pages: 1
D [02/Jul/2006:14:08:22 +0200] [Job 9] 0 %%LanguageLevel: 1
D [02/Jul/2006:14:08:22 +0200] [Job 9] 0 %%DocumentData: Clean7Bit
D [02/Jul/2006:14:08:22 +0200] [Job 9] 0 %%DocumentSuppliedResources: procset testprint/1.1
D [02/Jul/2006:14:08:22 +0200] [Job 9] 0 %%DocumentNeededResources: font Helvetica Helvetica-Bold Times-Roman
D [02/Jul/2006:14:08:22 +0200] [Job 9] 0 %%Creator: Michael Sweet, Easy Software Products
D [02/Jul/2006:14:08:22 +0200] [Job 9] 0 %%CreationDate: May 11, 1999
D [02/Jul/2006:14:08:22 +0200] [Job 9] 0 %%Title: Test Page
D [02/Jul/2006:14:08:22 +0200] [Job 9] 0 %%EndComments
D [02/Jul/2006:14:08:22 +0200] [Job 9] 0 %%BeginProlog
D [02/Jul/2006:14:08:22 +0200] [Job 9] 0 %%BeginResource procset testprint 1.1 0
D [02/Jul/2006:14:08:22 +0200] [Job 9] 0 %%EndResource
D [02/Jul/2006:14:08:22 +0200] [Job 9] 0 %%EndProlog
D [02/Jul/2006:14:08:22 +0200] [Job 9] 0 %%Page: 1 1
D [02/Jul/2006:14:08:22 +0200] [Job 9] 0 %%Page: 1 1
D [02/Jul/2006:14:08:22 +0200] [Job 9] pw = 595.0, pl = 842.0
D [02/Jul/2006:14:08:22 +0200] [Job 9] PageLeft = 0.0, PageRight = 595.0
D [02/Jul/2006:14:08:22 +0200] [Job 9] PageTop = 842.0, PageBottom = 0.0
D [02/Jul/2006:14:08:22 +0200] [Job 9] PageWidth = 595.0, PageLength = 842.0
D [02/Jul/2006:14:08:22 +0200] [Job 9] 0 %%EOF
D [02/Jul/2006:14:08:22 +0200] [Job 9] Saw EOF!
D [02/Jul/2006:14:08:22 +0200] UpdateJob: job 9, file 0 is complete.
D [02/Jul/2006:14:08:22 +0200] CancelJob: id = 9
D [02/Jul/2006:14:08:22 +0200] StopJob: id = 9, force = 0
D [02/Jul/2006:14:08:22 +0200] StopJob: printer state is 3
D [02/Jul/2006:14:08:26 +0200] ReadClient: 9 GET /printers/LexmarkZ31 HTTP/1.1
D [02/Jul/2006:14:08:26 +0200] CGI /usr/lib/cups/cgi-bin/printers.cgi started - PID = 12866
I [02/Jul/2006:14:08:26 +0200] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=12866)
D [02/Jul/2006:14:08:26 +0200] SendCommand: 9 file=13
D [02/Jul/2006:14:08:26 +0200] AcceptClient: 12 from localhost:631.
D [02/Jul/2006:14:08:26 +0200] ReadClient: 12 POST / HTTP/1.1
D [02/Jul/2006:14:08:26 +0200] ProcessIPPRequest: 12 status_code=1
D [02/Jul/2006:14:08:26 +0200] ReadClient: 12 POST / HTTP/1.1
D [02/Jul/2006:14:08:26 +0200] ProcessIPPRequest: 12 status_code=1
D [02/Jul/2006:14:08:26 +0200] ReadClient: 12 POST / HTTP/1.1
D [02/Jul/2006:14:08:26 +0200] ProcessIPPRequest: 12 status_code=1
D [02/Jul/2006:14:08:26 +0200] CloseClient: 12
D [02/Jul/2006:14:08:26 +0200] ReadClient: 8 GET /images/show-completed.gif HTTP/1.1
D [02/Jul/2006:14:08:26 +0200] SendFile: 8 file=12
D [02/Jul/2006:14:08:28 +0200] ReadClient: 5 GET /printers/LexmarkZ31?which_jobs=completed HTTP/1.1
D [02/Jul/2006:14:08:28 +0200] CGI /usr/lib/cups/cgi-bin/printers.cgi started - PID = 12867
I [02/Jul/2006:14:08:28 +0200] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=12867)
D [02/Jul/2006:14:08:28 +0200] SendCommand: 5 file=13
D [02/Jul/2006:14:08:28 +0200] AcceptClient: 12 from localhost:631.
D [02/Jul/2006:14:08:28 +0200] ReadClient: 12 POST / HTTP/1.1
D [02/Jul/2006:14:08:28 +0200] ProcessIPPRequest: 12 status_code=1
D [02/Jul/2006:14:08:28 +0200] ReadClient: 12 POST / HTTP/1.1
D [02/Jul/2006:14:08:28 +0200] ProcessIPPRequest: 12 status_code=1
D [02/Jul/2006:14:08:28 +0200] ReadClient: 12 POST / HTTP/1.1
D [02/Jul/2006:14:08:28 +0200] ProcessIPPRequest: 12 status_code=1
D [02/Jul/2006:14:08:28 +0200] CloseClient: 12
D [02/Jul/2006:14:08:28 +0200] ReadClient: 10 GET /images/restart-job.gif HTTP/1.1
D [02/Jul/2006:14:08:28 +0200] SendFile: 10 file=12
D [02/Jul/2006:14:08:28 +0200] ReadClient: 11 GET /images/show-active.gif HTTP/1.1
D [02/Jul/2006:14:08:28 +0200] SendFile: 11 file=13
D [02/Jul/2006:14:08:33 +0200] ReadClient: 6 GET /jobs/?op=restart-job&job_id=9&job_printer_uri=/printers/LexmarkZ31 HTTP/1.1
D [02/Jul/2006:14:08:33 +0200] SendError: 6 code=401 (Unauthorized)
D [02/Jul/2006:14:08:33 +0200] CloseClient: 6
D [02/Jul/2006:14:08:40 +0200] ReadClient: 9 GET /jobs/?op=restart-job&job_id=9&job_printer_uri=/printers/LexmarkZ31 HTTP/1.1
D [02/Jul/2006:14:08:40 +0200] CGI /usr/lib/cups/cgi-bin/jobs.cgi started - PID = 12868
I [02/Jul/2006:14:08:40 +0200] Started "/usr/lib/cups/cgi-bin/jobs.cgi" (pid=12868)
D [02/Jul/2006:14:08:40 +0200] SendCommand: 9 file=12
D [02/Jul/2006:14:08:40 +0200] AcceptClient: 6 from localhost:631.
D [02/Jul/2006:14:08:40 +0200] ReadClient: 6 POST /jobs HTTP/1.1
D [02/Jul/2006:14:08:40 +0200] SendError: 6 code=401 (Unauthorized)
D [02/Jul/2006:14:08:40 +0200] CloseClient: 6
D [02/Jul/2006:14:08:40 +0200] AcceptClient: 6 from localhost:631.
D [02/Jul/2006:14:08:40 +0200] ReadClient: 6 POST /jobs HTTP/1.1
E [02/Jul/2006:14:08:40 +0200] restart_job: job #9 cannot be restarted - no files!
D [02/Jul/2006:14:08:40 +0200] Sending error: client-error-not-possible
D [02/Jul/2006:14:08:40 +0200] ProcessIPPRequest: 6 status_code=404
D [02/Jul/2006:14:08:40 +0200] CloseClient: 6

Offline

 

#8  2006-07-02 14:16:14

  rzuku - Użytkownik

rzuku
Użytkownik
Zarejestrowany: 2005-08-13

Re: CUPS --> error:client-error-not-possible

A jeszcze jedno zapomniałem napisać, może to ma jakiś wpływe, że cups milczy. Drukarke mam podłaczoną pod port równoległy LPT1. Na innych dystrybucjach mi pracowała na nim bez problemu.

Pozdrawiam,
rzuku

Offline

 

#9  2006-07-02 14:30:27

  czadman - Bicycle repairman

czadman
Bicycle repairman
Skąd: Wrocław
Zarejestrowany: 2005-07-08

Re: CUPS --> error:client-error-not-possible

Masz zinstalowany pakiet foomatic-filters?


http://www.debian.org/logos/openlogo-nd-50.png

Offline

 

#10  2006-07-02 14:38:40

  rzuku - Użytkownik

rzuku
Użytkownik
Zarejestrowany: 2005-08-13

Re: CUPS --> error:client-error-not-possible

Działa !!!!!!!!!!!!!!! co do Error: client-error-not-possible. trzeba było w cups.conf właczyć opcje - PreserveJobFiles On, aleto do końca nie pomogło, bo mogłem resetować zadania,ale drukarka milczała. Po instalcji pakietu foomatic-filters RUSZYŁA !!! :D:D:D dzięki stary jesteś wielki ;) Pozdrawiam i życze miłego dnia ;)

Offline

 

#11  2006-07-02 14:44:24

  rzuku - Użytkownik

rzuku
Użytkownik
Zarejestrowany: 2005-08-13

Re: CUPS --> error:client-error-not-possible

teraz to mi tylko pozostało podłaczenie pod sambe :)

Offline

 

#12  2006-07-02 14:46:06

  czadman - Bicycle repairman

czadman
Bicycle repairman
Skąd: Wrocław
Zarejestrowany: 2005-07-08

Re: CUPS --> error:client-error-not-possible

Przestaw sobie poziom logowania na poprzedni, bo Ci się dysk zapcha jak będziesz dużo drukował. :)


http://www.debian.org/logos/openlogo-nd-50.png

Offline

 

#13  2006-07-02 14:48:33

  rzuku - Użytkownik

rzuku
Użytkownik
Zarejestrowany: 2005-08-13

Re: CUPS --> error:client-error-not-possible

a no racja zapomniałem jeszcze raz wielkie dzięki

Offline

 

#14  2006-09-07 21:59:34

  stary67 - Nowy użytkownik

stary67
Nowy użytkownik
Zarejestrowany: 2006-09-07

Re: CUPS --> error:client-error-not-possible

dzieki wg tego odpalilem tez epsona stylus c43sx

Offline

 

Stopka forum

Powered by PunBB
© Copyright 2002–2005 Rickard Andersson
To nie jest tylko forum, to nasza mała ojczyzna ;-)