Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!
Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.
Wygrzebałem w rupieciach dysk WD5000BEVT. Leżał sobie zakurzony 5-6 lat, widać że niedużo używany. Pytanie czy coś z niego będzie?
root@Microknoppix:/home/knoppix# smartctl -a /dev/sda smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.12.7-64] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Scorpio Blue Serial ATA Device Model: WDC WD5000BEVT-00ZAT0 Serial Number: WD-WXNX08NW3505 LU WWN Device Id: 5 0014ee 2025c522b Firmware Version: 01.01A01 User Capacity: 500,107,862,016 bytes [500 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 5400 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Wed Apr 11 08:55:36 2018 EDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (13200) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 154) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x303f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 4 3 Spin_Up_Time 0x0027 184 183 021 Pre-fail Always - 1775 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 542 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 455 10 Spin_Retry_Count 0x0033 100 100 051 Pre-fail Always - 0 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 452 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 39 193 Load_Cycle_Count 0x0032 198 198 000 Old_age Always - 7071 194 Temperature_Celsius 0x0022 112 106 000 Old_age Always - 35 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0009 100 253 051 Pre-fail Offline - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.
Offline
Daj lepiej wynik tego skrypta:
http://wklej.dug.net.pl/5240
Wynik będzie dużo bardziej czytelny, np:
/dev/sda - Model: Seagate Barracuda ES /dev/sda - Symbol: ST3400620NS /dev/sda - Seria: 9QH0BX9K /dev/sda: Power_On_Hours = 40242 /dev/sda: Reallocated_Sector_Ct = 0 /dev/sda: Spin_Retry_Count = 0 /dev/sda: Reported_Uncorrect = 0 /dev/sda: Current_Pending_Sector = 0 /dev/sda: Offline_Uncorrectable = 0 /dev/sda: UDMA_CRC_Error_Count = 0 /dev/sda: Multi_Zone_Error_Rate = 0 /dev/sdb - /dev/sdb - Symbol: WDC WD1005FBYZ-01YCBB2 /dev/sdb - Seria: WD-WMC6M0J4VTSU /dev/sdb: Power_On_Hours = 889 /dev/sdb: Reallocated_Sector_Ct = 0 /dev/sdb: Spin_Retry_Count = 0 /dev/sdb: Calibration_Retry_Count = 0 /dev/sdb: Reallocated_Event_Count = 0 /dev/sdb: Current_Pending_Sector = 0 /dev/sdb: Offline_Uncorrectable = 0 /dev/sdb: UDMA_CRC_Error_Count = 0 /dev/sdb: Multi_Zone_Error_Rate = 0
Pozdro
Offline
Proszę cię bardzo
root@Microknoppix:/home/knoppix/Desktop# ./test.sh /dev/sda - Model: Western Digital Scorpio Blue Serial ATA /dev/sda - Symbol: WDC WD5000BEVT-00ZAT0 /dev/sda - Seria: Western Digital Scorpio Blue Serial ATA /dev/sda: Power_On_Hours = 456 /dev/sda: Reallocated_Sector_Ct = 0 /dev/sda: Spin_Retry_Count = 0 /dev/sda: Calibration_Retry_Count = 0 /dev/sda: Reallocated_Event_Count = 0 /dev/sda: Current_Pending_Sector = 0 /dev/sda: Offline_Uncorrectable = 0 /dev/sda: UDMA_CRC_Error_Count = 0 /dev/sda: Multi_Zone_Error_Rate = 0
Offline
Żadnych problemów w nim nie widać, i nawiasem pisząc, chociaż seria blue to raczej budżetowe dyski,
to jednak bez przesady, po 456 godzinach pracy dysk nie ma prawa się psuć, żaden.
Ostatnio edytowany przez Jacekalex (2018-04-11 11:54:45)
Offline
Dysk wygląda na sprawny.
Offline
@Jacekalex ty potrzebujesz jakieś skryptu do oceny? xD Przecie z tego raportu widać dobitnie, że dyskowi nic nie dolega, choć ja bym mu jeszcze pełny skan zarzucił dla pewności.
Ostatnio edytowany przez morfik (2018-04-11 12:06:04)
Offline
Później bo dziad się strasznie grzeje
root@Microknoppix:/home/knoppix# hddtemp /dev/sda /dev/sda: WDC WD5000BEVT-00ZAT0: 48°C
Offline
stare dyski sa wytrzymale. mniejsze, wolniejsze, solidne...
mam jeszcze takiego seagate 100 GB SATA1. jaki on jest twardy :P
Offline
Moje dwa graty w PieCu, katowane przez przedni wiatrak:
WARNING: Drive /dev/sda doesn't appear in the database of supported drives
WARNING: But using a common value, it reports something.
WARNING: Note that the temperature shown could be wrong.
WARNING: See --help, --debug and --drivebase options.
WARNING: And don't forget you can add your drive to hddtemp.db
/dev/sda: ST3400620NS: 42°C or °F
WARNING: Drive /dev/sdb doesn't appear in the database of supported drives
WARNING: But using a common value, it reports something.
WARNING: Note that the temperature shown could be wrong.
WARNING: See --help, --debug and --drivebase options.
WARNING: And don't forget you can add your drive to hddtemp.db
/dev/sdb: WDC WD1005FBYZ-01YCBB2: 37°C or °F
Dziwne są tylko te warningi, jak poprzednio sprawdzałem temperaturę, chyba jeszcze na Ubuntu ;), to po prostu ją pokazał.
Offline
Z tym dyskiem to taka długa historia ... więc trochę się boje go używać, ale niepotrzebnie. Dzielnie mielił ponad 17h ...
root@Microknoppix:/home/knoppix# badblocks -wsv /dev/sda Checking for bad blocks in read-write mode From block 0 to 488386583 Testing with pattern 0xaa: done Reading and comparing: done Testing with pattern 0x55: done Reading and comparing: done Testing with pattern 0xff: done Reading and comparing: done Testing with pattern 0x00: done Reading and comparing: done Pass completed, 0 bad blocks found. (0/0/0 errors)
Offline
Proszę cię bardzo
root@Microknoppix:/home/knoppix# smartctl -a /dev/sda smartctl 6.6 2016-05-31 r4324 [i686-linux-4.12.7] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Scorpio Blue Serial ATA Device Model: WDC WD5000BEVT-00ZAT0 Serial Number: WD-WXNX08NW3505 LU WWN Device Id: 5 0014ee 2025c522b Firmware Version: 01.01A01 User Capacity: 500,107,862,016 bytes [500 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 5400 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Thu Apr 12 13:13:06 2018 EDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (13200) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 154) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x303f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 4 3 Spin_Up_Time 0x0027 183 183 021 Pre-fail Always - 1808 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 544 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 481 10 Spin_Retry_Count 0x0033 100 100 051 Pre-fail Always - 0 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 454 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 39 193 Load_Cycle_Count 0x0032 198 198 000 Old_age Always - 7098 194 Temperature_Celsius 0x0022 104 098 000 Old_age Always - 43 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0009 200 200 051 Pre-fail Offline - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 481 - # 2 Extended offline Completed without error 00% 478 - # 3 Extended offline Completed without error 00% 459 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.
root@Microknoppix:/home/knoppix/Desktop# ./test.sh /dev/sda - Model: Western Digital Scorpio Blue Serial ATA /dev/sda - Symbol: WDC WD5000BEVT-00ZAT0 /dev/sda - Seria: Western Digital Scorpio Blue Serial ATA /dev/sda: Power_On_Hours = 481 /dev/sda: Reallocated_Sector_Ct = 0 /dev/sda: Spin_Retry_Count = 0 /dev/sda: Calibration_Retry_Count = 0 /dev/sda: Reallocated_Event_Count = 0 /dev/sda: Current_Pending_Sector = 0 /dev/sda: Offline_Uncorrectable = 0 /dev/sda: UDMA_CRC_Error_Count = 0 /dev/sda: Multi_Zone_Error_Rate = 0
Ostatnio edytowany przez ciastek1981 (2018-04-12 15:21:18)
Offline