Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!

Ogłoszenie

Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundację Dzieciom „Zdążyć z Pomocą”.
Więcej informacji na dug.net.pl/pomagamy/.

#1 2017-07-15 22:36:12

Crossive
Użytkownik
Zarejestrowany: 2017-07-15

Problem z wykrywaniem Karty sieciowej pod USB.

Witam. Mam problem z wyszukaniem mojej karty Wi-Fi pod USB przez system Linux Kali.Zarówno na wirtualnej maszynie jak i podczas uruchamiania systemu w trybie live CD. W sieci jest pełno poradników jak można rozwiązać ten problem, lecz żaden z nich nie działa. Sama karta działa dobrze normalnie na Windowsie.
-Próbowałem dodać kartę sieciowa Bridge w vBoxie i tam ustawić mój adapter. Jest wtedy co prawda dostęp do internetu lecz, zaliczony jest on jako wired.
-Próbowałem podłączyć adapter do controlera USB w vBoxie, ale i to nie działa i system poprostu nie widzi tej karty.(Acz kolwiek w "lsusb" jest widoczne nowe urządzenie)
-Ściągnąłem rozszerzenie pozwalające Vboxowi obsługę USB 2.0 i 3.0 lecz to również nie pomogło.
-Próbowałem też zainstalować pakiet Compact wireless,ale on dodaje 2 karty z których żadna nie jest moją pod USB i z którymi nie mogę nic zrobić.
Hostuje maszynę na Windows 10, a hostowany system to Linux Kali. Adapter WiFi to TP Link TL-WN722N. Jakieś sugestie jak mogę sprawić, aby karta USB została wykryta przez System?
Proszę o pomoc. Z góry dziękuję.

Offline

 

#2 2017-07-16 09:24:56

arecki
Użytkownik
Zarejestrowany: 2016-03-03

Re: Problem z wykrywaniem Karty sieciowej pod USB.

Kod:

apt-get install firmware-atheros

Offline

 

#3 2017-07-16 11:25:27

Crossive
Użytkownik
Zarejestrowany: 2017-07-15

Re: Problem z wykrywaniem Karty sieciowej pod USB.

Niestety po zainstalowaniu tego w dalszym ciągu nie wyszukuje Adaptera.
Jakieś inne sugestię?

Offline

 

#4 2017-07-16 11:39:18

morfik
Cenzor wirtualnego świata
Skąd: ze WSI
Zarejestrowany: 2011-09-15
Serwis

Re: Problem z wykrywaniem Karty sieciowej pod USB.

A jaka jest wersja sprzętowa tej karty?
https://wikidevi.com/wiki/TP-LINK_TL-WN722N


Morfitronik — blog o linux'ach, głównie Debian, OpenWRT/LEDE i Android

Offline

 

#5 2017-07-16 11:43:43

Crossive
Użytkownik
Zarejestrowany: 2017-07-15

Re: Problem z wykrywaniem Karty sieciowej pod USB.

TL-WN722N(EU) Ver:2.0

Offline

 

#6 2017-07-16 11:45:07

morfik
Cenzor wirtualnego świata
Skąd: ze WSI
Zarejestrowany: 2011-09-15
Serwis

Re: Problem z wykrywaniem Karty sieciowej pod USB.

No to spróbuj dograć firmware od realteka


Morfitronik — blog o linux'ach, głównie Debian, OpenWRT/LEDE i Android

Offline

 

#7 2017-07-16 12:00:16

Crossive
Użytkownik
Zarejestrowany: 2017-07-15

Re: Problem z wykrywaniem Karty sieciowej pod USB.

Niestety nadal nic :(

Offline

 

#8 2017-07-16 12:04:51

morfik
Cenzor wirtualnego świata
Skąd: ze WSI
Zarejestrowany: 2011-09-15
Serwis

Re: Problem z wykrywaniem Karty sieciowej pod USB.

A co masz w logu po wsadzeniu tej karty do portu USB?


Morfitronik — blog o linux'ach, głównie Debian, OpenWRT/LEDE i Android

Offline

 

#9 2017-07-16 12:20:51

Crossive
Użytkownik
Zarejestrowany: 2017-07-15

Re: Problem z wykrywaniem Karty sieciowej pod USB.

Kod:

[  133.924879] usb 1-1: new high-speed USB device number 3 using ehci-pci
[  134.266230] usb 1-1: New USB device found, idVendor=2357, idProduct=010c
[  134.266233] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  134.266234] usb 1-1: Product: 802.11n NIC
[  134.266235] usb 1-1: Manufacturer: Realtek
[  134.266236] usb 1-1: SerialNumber: 00E04C0001

Offline

 

#10 2017-07-16 12:54:19

arecki
Użytkownik
Zarejestrowany: 2016-03-03

Re: Problem z wykrywaniem Karty sieciowej pod USB.

A pokaż co tam logi mówią o firmware.

Offline

 

#11 2017-07-16 13:03:24

morfik
Cenzor wirtualnego świata
Skąd: ze WSI
Zarejestrowany: 2011-09-15
Serwis

Re: Problem z wykrywaniem Karty sieciowej pod USB.

A jaki kernel tam jest?


Morfitronik — blog o linux'ach, głównie Debian, OpenWRT/LEDE i Android

Offline

 

#12 2017-07-16 14:01:56

Crossive
Użytkownik
Zarejestrowany: 2017-07-15

Re: Problem z wykrywaniem Karty sieciowej pod USB.

4.9.0-kali3-686-pae

i nie mogę znaleźć w logach nic o firmware.

Offline

 

#13 2017-07-16 14:06:36

Jacekalex
Podobno człowiek...;)
Skąd: /dev/urandom
Zarejestrowany: 2008-01-07

Re: Problem z wykrywaniem Karty sieciowej pod USB.

Crossive napisał(-a):

4.9.0-kali3-686-pae

i nie mogę znaleźć w logach nic o firmware.

Znowu Kali? jak chcesz się bawić w "hakiera" to szoruj do sklepu po TL-722N v1
z Atherosem, który bryka na sterze ath9k_htc.

Dokładnie taki:

description: Wireless interface
       physical id: 2
       bus info: usb@2:4
       logical name: wlan0
       serial: ec:08:6b:17:66:e3
       capabilities: ethernet physical wireless
       configuration: broadcast=yes driver=ath9k_htc driverversion=4.12.1-g1 firmware=1.4 link=no multicast=yes wireless=IEEE 802.11

Też  potrzebuje firmware, ale bryka jak należy...


W demokracji każdy naród ma taką władzę, na jaką zasługuje ;)
Si vis pacem  para bellum  ;)       |       Pozdrawiam :)

Online

 

#14 2017-07-16 15:35:35

wikingagressor
Użytkownik
Skąd: Józefów k.Błonia, mazowieckie
Zarejestrowany: 2015-02-03

Re: Problem z wykrywaniem Karty sieciowej pod USB.

Pokaz co sie dzieje po wlozeniu dongla. Szczegolnie wazne sa wiadomosci z dmesg.


Peace, Love and Debian for the World!!!

Offline

 

#15 2017-07-16 15:55:46

Crossive
Użytkownik
Zarejestrowany: 2017-07-15

Re: Problem z wykrywaniem Karty sieciowej pod USB.

Powyżej juz podałem co pokazuje dmesg kiedy podepnę Adapter

Kod:

[   91.948081] usb 1-1: new high-speed USB device number 2 using ehci-pci
[   92.294637] usb 1-1: New USB device found, idVendor=2357, idProduct=010c
[   92.294639] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   92.294640] usb 1-1: Product: 802.11n NIC
[   92.294641] usb 1-1: Manufacturer: Realtek
[   92.294642] usb 1-1: SerialNumber: 00E04C0001

Tu jest całe dmesg:

Kod:

[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000741effff] usable
[    0.000000] BIOS-e820: [mem 0x00000000741f0000-0x00000000741fffff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.5 present.
[    0.000000] DMI: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[    0.000000] Hypervisor detected: KVM
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x741f0 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR variable ranges disabled:
[    0.000000] MTRR: Disabled
[    0.000000] x86/PAT: MTRRs disabled, skipping PAT initialization too.
[    0.000000] x86/PAT: Configuration [0-7]: WB  WT  UC- UC  WB  WT  UC- UC  
[    0.000000] CPU MTRRs all blank - virtualized system.
[    0.000000] found SMP MP-table at [mem 0x0009fff0-0x0009ffff] mapped at [c009fff0]
[    0.000000] initial memory mapped: [mem 0x00000000-0x0adfffff]
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] BRK [0x0a96b000, 0x0a96bfff] PGTABLE
[    0.000000] BRK [0x0a96c000, 0x0a96dfff] PGTABLE
[    0.000000] BRK [0x0a96e000, 0x0a96efff] PGTABLE
[    0.000000] BRK [0x0a96f000, 0x0a96ffff] PGTABLE
[    0.000000] RAMDISK: [mem 0x34ea9000-0x3674bfff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000E0000 000024 (v02 VBOX  )
[    0.000000] ACPI: XSDT 0x00000000741F0030 00003C (v01 VBOX   VBOXXSDT 00000001 ASL  00000061)
[    0.000000] ACPI: FACP 0x00000000741F00F0 0000F4 (v04 VBOX   VBOXFACP 00000001 ASL  00000061)
[    0.000000] ACPI: DSDT 0x00000000741F0470 0021C8 (v02 VBOX   VBOXBIOS 00000002 INTL 20100528)
[    0.000000] ACPI: FACS 0x00000000741F0200 000040
[    0.000000] ACPI: FACS 0x00000000741F0200 000040
[    0.000000] ACPI: APIC 0x00000000741F0240 000054 (v02 VBOX   VBOXAPIC 00000001 ASL  00000061)
[    0.000000] ACPI: SSDT 0x00000000741F02A0 0001CC (v01 VBOX   VBOXCPUT 00000002 INTL 20100528)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 967MB HIGHMEM available.
[    0.000000] 889MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 379fe000
[    0.000000]   low ram: 0 - 379fe000
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000000] kvm-clock: cpu 0, msr 0:379fd001, primary cpu clock
[    0.000000] kvm-clock: using sched offset of 9612877639 cycles
[    0.000000] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   Normal   [mem 0x0000000001000000-0x00000000379fdfff]
[    0.000000]   HighMem  [mem 0x00000000379fe000-0x00000000741effff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000741effff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000000741effff]
[    0.000000] On node 0 totalpages: 475534
[    0.000000] free_area_init_node: node 0, pgdat ca7c4ac0, node_mem_map f69a4024
[    0.000000]   DMA zone: 36 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   Normal zone: 1967 pages used for memmap
[    0.000000]   Normal zone: 223742 pages, LIFO batch:31
[    0.000000]   HighMem zone: 247794 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x4008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] e820: [mem 0x74200000-0xfebfffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on KVM
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] percpu: Embedded 20 pages/cpu @f698d000 s50636 r0 d31284 u81920
[    0.000000] pcpu-alloc: s50636 r0 d31284 u81920 alloc=20*4096
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] PV qspinlock hash table entries: 512 (order: 0, 4096 bytes)
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 473531
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-kali3-686-pae root=/dev/sda1 ro initrd=/install/initrd.gz quiet
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (000379fe:000741f0)
[    0.000000] Initializing Movable for node 0 (00000000:00000000)
[    0.000000] Memory: 1849544K/1902136K available (5718K kernel code, 641K rwdata, 1692K rodata, 744K init, 456K bss, 52592K reserved, 0K cma-reserved, 991176K highmem)
[    0.000000] virtual kernel memory layout:
                   fixmap  : 0xffd36000 - 0xfffff000   (2852 kB)
                   pkmap   : 0xffa00000 - 0xffc00000   (2048 kB)
                   vmalloc : 0xf81fe000 - 0xff9fe000   ( 120 MB)
                   lowmem  : 0xc0000000 - 0xf79fe000   ( 889 MB)
                     .init : 0xca7e1000 - 0xca89b000   ( 744 kB)
                     .data : 0xca595ef2 - 0xca7df580   (2341 kB)
                     .text : 0xca000000 - 0xca595ef2   (5719 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] Hierarchical RCU implementation.
[    0.000000]     Build-time adjustment of leaf fanout to 32.
[    0.000000]     RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=1.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1
[    0.000000] NR_IRQS:2304 nr_irqs:256 16
[    0.000000] CPU 0 irqstacks, hard=f482e000 soft=f4830000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] tsc: Detected 3886.290 MHz processor
[    0.106228] Calibrating delay loop (skipped) preset value.. 7772.58 BogoMIPS (lpj=15545160)
[    0.106231] pid_max: default: 32768 minimum: 301
[    0.106249] ACPI: Core revision 20160831
[    0.107144] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.107165] Security Framework initialized
[    0.107166] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.107171] AppArmor: AppArmor disabled by boot time parameter
[    0.107181] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.107182] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.107408] mce: CPU supports 0 MCE banks
[    0.107426] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
[    0.107427] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
[    0.118025] Freeing SMP alternatives memory: 24K (ca89b000 - ca8a1000)
[    0.126145] ftrace: allocating 23723 entries in 47 pages
[    0.158338] smpboot: Max logical packages: 1
[    0.158365] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.159744] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.262922] smpboot: CPU0: AMD FX(tm)-8350 Eight-Core Processor (family: 0x15, model: 0x2, stepping: 0x0)
[    0.262926] Performance Events: PMU not available due to virtualization, using software events only.
[    0.262965] KVM setup paravirtual spinlock
[    0.263349] x86: Booted up 1 node, 1 CPUs
[    0.263350] smpboot: Total of 1 processors activated (7772.58 BogoMIPS)
[    0.263607] devtmpfs: initialized
[    0.263778] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.263783] futex hash table entries: 256 (order: 2, 16384 bytes)
[    0.263812] pinctrl core: initialized pinctrl subsystem
[    0.263893] NET: Registered protocol family 16
[    0.264025] cpuidle: using governor ladder
[    0.264026] cpuidle: using governor menu
[    0.264253] ACPI: bus type PCI registered
[    0.264254] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.264326] PCI: Using configuration type 1 for base access
[    0.264327] PCI: Using configuration type 1 for extended access
[    0.264897] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.265032] ACPI: Added _OSI(Module Device)
[    0.265032] ACPI: Added _OSI(Processor Device)
[    0.265033] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.265034] ACPI: Added _OSI(Processor Aggregator Device)
[    0.265277] ACPI: Executed 1 blocks of module-level executable AML code
[    0.267344] ACPI: Interpreter enabled
[    0.267354] ACPI: (supports S0 S5)
[    0.267354] ACPI: Using IOAPIC for interrupt routing
[    0.267493] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.270982] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.270985] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.270988] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.271235] PCI host bridge to bus 0000:00
[    0.271237] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.271238] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.271239] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.271240] pci_bus 0000:00: root bus resource [mem 0x74200000-0xffdfffff window]
[    0.271242] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.271276] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[    0.271852] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[    0.272415] pci 0000:00:01.1: [8086:7111] type 00 class 0x01018a
[    0.272775] pci 0000:00:01.1: reg 0x20: [io  0xd000-0xd00f]
[    0.272925] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.272926] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.272927] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.272928] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.273113] pci 0000:00:02.0: [80ee:beef] type 00 class 0x030000
[    0.275789] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe1ffffff pref]
[    0.285896] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000
[    0.287012] pci 0000:00:03.0: reg 0x10: [mem 0xf0000000-0xf001ffff]
[    0.288790] pci 0000:00:03.0: reg 0x18: [io  0xd010-0xd017]
[    0.292860] pci 0000:00:04.0: [80ee:cafe] type 00 class 0x088000
[    0.293961] pci 0000:00:04.0: reg 0x10: [io  0xd020-0xd03f]
[    0.294779] pci 0000:00:04.0: reg 0x14: [mem 0xf0400000-0xf07fffff]
[    0.295573] pci 0000:00:04.0: reg 0x18: [mem 0xf0800000-0xf0803fff pref]
[    0.298964] pci 0000:00:05.0: [8086:2415] type 00 class 0x040100
[    0.299051] pci 0000:00:05.0: reg 0x10: [io  0xd100-0xd1ff]
[    0.299114] pci 0000:00:05.0: reg 0x14: [io  0xd200-0xd23f]
[    0.299607] pci 0000:00:06.0: [106b:003f] type 00 class 0x0c0310
[    0.300473] pci 0000:00:06.0: reg 0x10: [mem 0xf0804000-0xf0804fff]
[    0.306741] pci 0000:00:07.0: [8086:7113] type 00 class 0x068000
[    0.307173] pci 0000:00:07.0: quirk: [io  0x4000-0x403f] claimed by PIIX4 ACPI
[    0.307182] pci 0000:00:07.0: quirk: [io  0x4100-0x410f] claimed by PIIX4 SMB
[    0.307422] pci 0000:00:0b.0: [8086:265c] type 00 class 0x0c0320
[    0.308323] pci 0000:00:0b.0: reg 0x10: [mem 0xf0805000-0xf0805fff]
[    0.313901] pci 0000:00:0d.0: [8086:2829] type 00 class 0x010601
[    0.314767] pci 0000:00:0d.0: reg 0x10: [io  0xd240-0xd247]
[    0.316379] pci 0000:00:0d.0: reg 0x18: [io  0xd250-0xd257]
[    0.318034] pci 0000:00:0d.0: reg 0x20: [io  0xd260-0xd26f]
[    0.318858] pci 0000:00:0d.0: reg 0x24: [mem 0xf0806000-0xf0807fff]
[    0.320363] pci_bus 0000:00: on NUMA node 0
[    0.321451] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 9 10 *11)
[    0.321645] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 9 10 *11)
[    0.321722] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 9 *10 11)
[    0.321796] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 *9 10 11)
[    0.321905] ACPI: Enabled 2 GPEs in block 00 to 07
[    0.322014] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.322015] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.322017] vgaarb: loaded
[    0.322017] vgaarb: bridge control possible 0000:00:02.0
[    0.322084] PCI: Using ACPI for IRQ routing
[    0.322085] PCI: pci_cache_line_size set to 64 bytes
[    0.322266] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.322268] e820: reserve RAM buffer [mem 0x741f0000-0x77ffffff]
[    0.322420] clocksource: Switched to clocksource kvm-clock
[    0.332633] VFS: Disk quotas dquot_6.6.0
[    0.332646] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.332706] pnp: PnP ACPI init
[    0.332766] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.332820] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 (active)
[    0.333370] pnp: PnP ACPI: found 2 devices
[    0.333372] PnPBIOS: Disabled by ACPI PNP
[    0.367923] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.367934] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.367935] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.367937] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.367938] pci_bus 0000:00: resource 7 [mem 0x74200000-0xffdfffff window]
[    0.367977] NET: Registered protocol family 2
[    0.372073] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.372081] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.372090] TCP: Hash tables configured (established 8192 bind 8192)
[    0.372101] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.372104] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.372172] NET: Registered protocol family 1
[    0.372180] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[    0.372205] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[    0.372248] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.373963] PCI: CLS 0 bytes, default 64
[    0.374005] Unpacking initramfs...
[    0.786050] Freeing initrd memory: 25228K (f4ea9000 - f674c000)
[    0.786393] platform rtc_cmos: registered platform RTC device (no PNP device found)
[    0.786589] audit: initializing netlink subsys (disabled)
[    0.786606] audit: type=2000 audit(1500212984.205:1): initialized
[    0.786818] workingset: timestamp_bits=14 max_order=19 bucket_order=5
[    0.786828] zbud: loaded
[    0.787095] bounce: pool size: 64 pages
[    0.787102] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    0.787117] io scheduler noop registered
[    0.787118] io scheduler deadline registered
[    0.787125] io scheduler cfq registered (default)
[    0.787197] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.787201] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.787256] GHES: HEST is not enabled!
[    0.787269] isapnp: Scanning for PnP cards...
[    1.144105] isapnp: No Plug & Play device found
[    1.144183] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.144472] Linux agpgart interface v0.103
[    1.144680] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    1.145118] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.145122] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.145207] mousedev: PS/2 mouse device common for all mice
[    1.145427] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.145754] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[    1.145817] rtc_cmos rtc_cmos: alarms up to one day, 114 bytes nvram
[    1.145825] ledtrig-cpu: registered to indicate activity on CPUs
[    1.145960] NET: Registered protocol family 10
[    1.146095] mip6: Mobile IPv6
[    1.146096] NET: Registered protocol family 17
[    1.146098] mpls_gso: MPLS GSO support
[    1.146184] microcode: CPU0: patch_level=0x06000626
[    1.146204] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.146207] Using IPI No-Shortcut mode
[    1.146274] registered taskstats version 1
[    1.146283] zswap: loaded using pool lzo/zbud
[    1.146650] rtc_cmos rtc_cmos: setting system clock to 2017-07-16 13:49:33 UTC (1500212973)
[    1.146672] PM: Hibernation image not present or could not be loaded.
[    1.146878] Freeing unused kernel memory: 744K (ca7e1000 - ca89b000)
[    1.146923] Write protecting the kernel text: 5720k
[    1.146953] Write protecting the kernel read-only data: 1700k
[    1.146954] NX-protecting the kernel data: 4520k
[    1.147060] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.215620] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.215746] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.216102] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.216161] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.216377] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.216428] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.216478] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.216532] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.216586] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.216636] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.234151] SCSI subsystem initialized
[    1.248891] ACPI: bus type USB registered
[    1.248911] usbcore: registered new interface driver usbfs
[    1.248918] usbcore: registered new interface driver hub
[    1.249036] piix4_smbus 0000:00:07.0: SMBus Host Controller at 0x4100, revision 0
[    1.249304] usbcore: registered new device driver usb
[    1.249892] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.250059] ehci-pci: EHCI PCI platform driver
[    1.250615] ehci-pci 0000:00:0b.0: EHCI Host Controller
[    1.250619] ehci-pci 0000:00:0b.0: new USB bus registered, assigned bus number 1
[    1.250814] ehci-pci 0000:00:0b.0: irq 19, io mem 0xf0805000
[    1.251272] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.251370] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[    1.251370] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    1.255484] libata version 3.00 loaded.
[    1.266652] ehci-pci 0000:00:0b.0: USB 2.0 started, EHCI 1.00
[    1.266698] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.266700] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.266701] usb usb1: Product: EHCI Host Controller
[    1.266702] usb usb1: Manufacturer: Linux 4.9.0-kali3-686-pae ehci_hcd
[    1.266703] usb usb1: SerialNumber: 0000:00:0b.0
[    1.266787] hub 1-0:1.0: USB hub found
[    1.266791] hub 1-0:1.0: 12 ports detected
[    1.267959] ohci-pci: OHCI PCI platform driver
[    1.466823] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2
[    1.638572] e1000 0000:00:03.0 eth0: (PCI:33MHz:32-bit) 08:00:27:ec:26:e5
[    1.638576] e1000 0000:00:03.0 eth0: Intel(R) PRO/1000 Network Connection
[    1.638595] ata_piix 0000:00:01.1: version 2.13
[    1.640041] scsi host0: ata_piix
[    1.640161] scsi host1: ata_piix
[    1.640194] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xd000 irq 14
[    1.640195] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xd008 irq 15
[    1.640307] ahci 0000:00:0d.0: version 3.0
[    1.640811] ahci 0000:00:0d.0: SSS flag set, parallel bus scan disabled
[    1.640922] ahci 0000:00:0d.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
[    1.640923] ahci 0000:00:0d.0: flags: 64bit ncq stag only ccc 
[    1.641737] scsi host2: ahci
[    1.641787] ata3: SATA max UDMA/133 abar m8192@0xf0806000 port 0xf0806100 irq 21
[    1.642325] ohci-pci 0000:00:06.0: OHCI PCI host controller
[    1.642329] ohci-pci 0000:00:06.0: new USB bus registered, assigned bus number 2
[    1.642385] ohci-pci 0000:00:06.0: irq 22, io mem 0xf0804000
[    1.704012] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.704017] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.704020] usb usb2: Product: OHCI PCI host controller
[    1.704022] usb usb2: Manufacturer: Linux 4.9.0-kali3-686-pae ohci_hcd
[    1.704025] usb usb2: SerialNumber: 0000:00:06.0
[    1.704598] hub 2-0:1.0: USB hub found
[    1.704866] hub 2-0:1.0: 12 ports detected
[    1.799680] ata2.00: ATAPI: VBOX CD-ROM, 1.0, max UDMA/133
[    1.800324] ata2.00: configured for UDMA/33
[    1.801160] scsi 1:0:0:0: CD-ROM            VBOX     CD-ROM           1.0  PQ: 0 ANSI: 5
[    1.957987] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.958104] ata3.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133
[    1.958106] ata3.00: 83886080 sectors, multi 128: LBA48 NCQ (depth 31/32)
[    1.958257] ata3.00: configured for UDMA/133
[    1.958415] scsi 2:0:0:0: Direct-Access     ATA      VBOX HARDDISK    1.0  PQ: 0 ANSI: 5
[    1.963807] sd 2:0:0:0: [sda] 83886080 512-byte logical blocks: (42.9 GB/40.0 GiB)
[    1.963856] sd 2:0:0:0: [sda] Write Protect is off
[    1.963858] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.963874] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.974918] sr 1:0:0:0: [sr0] scsi3-mmc drive: 32x/32x xa/form2 tray
[    1.974920] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.975518] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.990604]  sda: sda1 sda2 < sda5 >
[    1.991255] sd 2:0:0:0: [sda] Attached SCSI disk
[    2.022791] random: fast init done
[    2.151523] usb 2-1: new full-speed USB device number 2 using ohci-pci
[    2.483997] usb 2-1: New USB device found, idVendor=80ee, idProduct=0021
[    2.484000] usb 2-1: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[    2.484001] usb 2-1: Product: USB Tablet
[    2.484002] usb 2-1: Manufacturer: VirtualBox
[    2.491778] hidraw: raw HID events driver (C) Jiri Kosina
[    2.503884] usbcore: registered new interface driver usbhid
[    2.503885] usbhid: USB HID core driver
[    2.510550] input: VirtualBox USB Tablet as /devices/pci0000:00/0000:00:06.0/usb2/2-1/2-1:1.0/0003:80EE:0021.0001/input/input3
[    2.510732] hid-generic 0003:80EE:0021.0001: input,hidraw0: USB HID v1.10 Mouse [VirtualBox USB Tablet] on usb-0000:00:06.0-1/input0
[    4.302526] floppy0: no floppy controllers found
[    4.302617] work still pending
[    4.341900] PM: Starting manual resume from disk
[    4.341904] PM: Hibernation image partition 8:5 present
[    4.341905] PM: Looking for hibernation image.
[    4.342207] PM: Image not found (code -22)
[    4.342208] PM: Hibernation image not present or could not be loaded.
[    5.902593] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x700986ff67d, max_idle_ns: 881590759800 ns
[    6.268306] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    7.074676] random: crng init done
[    7.323748] ip_tables: (C) 2000-2006 Netfilter Core Team
[    7.374025] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    7.374062] systemd[1]: Detected virtualization oracle.
[    7.374066] systemd[1]: Detected architecture x86.
[    7.383309] systemd[1]: Set hostname to <kali>.
[    8.036767] systemd[1]: Created slice User and Session Slice.
[    8.036869] systemd[1]: Listening on Journal Socket (/dev/log).
[    8.036950] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    8.037001] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    8.037043] systemd[1]: Listening on LVM2 metadata daemon socket.
[    8.037078] systemd[1]: Listening on LVM2 poll daemon socket.
[    8.481999] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    8.771167] systemd-journald[192]: Received request to flush runtime journal from PID 1
[    9.357358] vboxguest: loading out-of-tree module taints kernel.
[    9.370840] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[    9.370844] ACPI: Power Button [PWRF]
[    9.371169] input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input5
[    9.371171] ACPI: Sleep Button [SLPF]
[    9.373011] [drm] Initialized
[    9.379639] vgdrvHeartbeatInit: Setting up heartbeat to trigger every 2000 milliseconds
[    9.379758] input: Unspecified device as /devices/pci0000:00/0000:00:04.0/input/input6
[    9.379865] vboxguest: misc device minor 58, IRQ 20, I/O port d020, MMIO at 00000000f0400000 (size 0x400000)
[    9.379866] vboxguest: Successfully loaded version 5.1.18_Debian (interface 0x00010004)
[    9.385617] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    9.385675] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input7
[    9.415456] ACPI: AC Adapter [AC] (on-line)
[    9.422472] [drm] VRAM 02000000
[    9.428359] [TTM] Zone  kernel: Available graphics memory: 442182 kiB
[    9.428360] [TTM] Zone highmem: Available graphics memory: 937770 kiB
[    9.428361] [TTM] Initializing pool allocator
[    9.428364] [TTM] Initializing DMA pool allocator
[    9.428598] fbcon: vboxdrmfb (fb0) is primary device
[    9.450194] Console: switching to colour frame buffer device 100x37
[    9.451827] vboxvideo 0000:00:02.0: fb0: vboxdrmfb frame buffer device
[    9.451832] [drm] Initialized vboxvideo 1.0.0 20130823 for 0000:00:02.0 on minor 0
[    9.482690] sr 1:0:0:0: Attached scsi generic sg0 type 5
[    9.482717] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    9.543202] input: PC Speaker as /devices/platform/pcspkr/input/input8
[    9.578997] EDAC MC: Ver: 3.0.0
[    9.582203] MCE: In-kernel MCE decoding enabled.
[    9.813877] snd_intel8x0 0000:00:05.0: white list rate for 1028:0177 is 48000
[    9.823490] ppdev: user-space parallel port driver
[   10.325432] Adding 2095100k swap on /dev/sda5.  Priority:-1 extents:1 across:2095100k FS
[   12.494458] floppy0: no floppy controllers found
[   12.494498] work still pending
[   13.016280] Bluetooth: Core ver 2.22
[   13.016432] NET: Registered protocol family 31
[   13.016432] Bluetooth: HCI device and connection manager initialized
[   13.016439] Bluetooth: HCI socket layer initialized
[   13.016440] Bluetooth: L2CAP socket layer initialized
[   13.016445] Bluetooth: SCO socket layer initialized
[   13.083569] Netfilter messages via NETLINK v0.30.
[   13.775694] vboxsf: Successfully loaded version 5.1.18_Debian (interface 0x00010004)
[   14.065910] VBoxService 5.1.18_Debian r114002 (verbosity: 0) linux.x86 (Mar 15 2017 23:04:58) release log
               00:00:00.000343 main     Log opened 2017-07-16T13:49:46.419104000Z
[   14.066145] 00:00:00.000650 main     OS Product: Linux
[   14.066230] 00:00:00.000722 main     OS Release: 4.9.0-kali3-686-pae
[   14.066306] 00:00:00.000810 main     OS Version: #1 SMP Debian 4.9.18-1kali1 (2017-04-04)
[   14.066404] 00:00:00.000880 main     Executable: /usr/sbin/VBoxService
               00:00:00.000884 main     Process ID: 519
               00:00:00.000887 main     Package type: LINUX_32BITS_GENERIC (OSE)
[   14.075655] 00:00:00.010008 main     5.1.18_Debian r114002 started. Verbose level = 0
[   14.206946] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   14.208753] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   14.215112] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[   14.215415] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   38.517940] fuse init (API version 7.26)
[   91.948081] usb 1-1: new high-speed USB device number 3 using ehci-pci
[   92.294637] usb 1-1: New USB device found, idVendor=2357, idProduct=010c
[   92.294639] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   92.294640] usb 1-1: Product: 802.11n NIC
[   92.294641] usb 1-1: Manufacturer: Realtek
[   92.294642] usb 1-1: SerialNumber: 00E04C0001

Offline

 

#16 2017-07-16 16:11:19

morfik
Cenzor wirtualnego świata
Skąd: ze WSI
Zarejestrowany: 2011-09-15
Serwis

Re: Problem z wykrywaniem Karty sieciowej pod USB.

Zgodnie z tym co pisali na wikidev, to ten adapter w wersji 2 działa na module r8188eu . Nie wiem czy ten moduł jest w tamtym kernelu i trzeba by to sprawdzić, bo wygląda tak jakby go nie było. U mnie on jest:

Kod:

linux-image-4.11.0-1-amd64: /lib/modules/4.11.0-1-amd64/kernel/drivers/staging/rtl8188eu/r8188eu.ko

A jak go nie ma w tamtym kernelu, to trzeba albo go skompilować ręcznie, albo postarać się o kernel, w którym ten moduł jest.


Morfitronik — blog o linux'ach, głównie Debian, OpenWRT/LEDE i Android

Offline

 

#17 2017-07-16 17:04:12

Crossive
Użytkownik
Zarejestrowany: 2017-07-15

Re: Problem z wykrywaniem Karty sieciowej pod USB.

W koncu. Po zainstalowaniu tego modulu ,Dziala. Dziekuje wszystkim za poswiecony czas.

Offline

 

Stopka forum

Powered by PunBB
© Copyright 2002–2005 Rickard Andersson
Nas ludzie lubią po prostu, a nie klikając w przyciski ;-)