Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!
Ogłoszenie
Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.
- Forum Debian Users Gang
- » Instalacja i podstawowa konfiguracja
- » Debian 9 i686 - brak ekranu logowania
#1 2017-06-28 17:43:01
michalc1976 - Użytkownik
- michalc1976
- Użytkownik
- Zarejestrowany: 2017-06-28
Debian 9 i686 - brak ekranu logowania
Cześć,
zainstalowałem Debiana 9 w wersji z płyty DVD, na starym laptopie Lenovo R60e (i386). Podczas instalacji nie miałem dostępu do netu. Po zainstalowaniu nie mam ekranu logowania, tzn. włącza się tryb graficzny i jest czarny kursor na czarnym tle. Muszę przejść do konsoli, zalogować się, wpisać startx i dopiero wszystko jest ok.
Nie umiem sobie poradzić z tym problemem, jestem początkującym użytkownikiem. Na laptopie mam też Win 10.
Z tego co zdołałem się zorientować nie mam gdm3:
Kod:
root@CinkPadR60e:~# service gdm3 status Unit gdm3.service could not be found.
Ale za to jest lightdm:
Kod:
root@CinkPadR60e:~# service lightdm status
● lightdm.service - Light Display Manager
Loaded: loaded (/lib/systemd/system/lightdm.service; enabled; vendor preset: enabled)
Active: active (running) since Wed 2017-06-28 16:27:44 BST; 11min ago
Docs: man:lightdm(1)
Process: 446 ExecStartPre=/bin/sh -c [ "$(cat /etc/X11/default-display-manager 2>/dev/null)" = "/usr/sbin/lightdm" ] (code=exited, status=0/SUCCESS)
Main PID: 451 (lightdm)
Tasks: 7 (limit: 4915)
CGroup: /system.slice/lightdm.service
├─451 /usr/sbin/lightdm
├─472 /usr/lib/xorg/Xorg :0 -seat seat0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch
└─580 lightdm --session-child 12 19
Jun 28 16:27:44 CinkPadR60e systemd[1]: Starting Light Display Manager...
Jun 28 16:27:44 CinkPadR60e systemd[1]: Started Light Display Manager.
Jun 28 16:27:45 CinkPadR60e lightdm[542]: pam_unix(lightdm-greeter:session): session opened for user lightdm by (uid=0)Proszę o pomoc
Michał
Offline
#2 2017-06-28 22:21:41
Yampress - 
Imperator
- Yampress
- Imperator
- Zarejestrowany: 2007-10-18
Re: Debian 9 i686 - brak ekranu logowania
To trzeba zainstalować gdm3. Skoro się nie uruchamia t o nie jest zainstalowany.
Offline
#3 2017-06-29 06:40:29
zbig - Użytkownik
- zbig
- Użytkownik
- Zarejestrowany: 2010-02-25
Re: Debian 9 i686 - brak ekranu logowania
Albo nie ma doinstalowanego Greetera do lihgtm skoro lightdm jest uruchomiony a nie widać powłoki.
Offline
#4 2017-06-29 06:53:10
michalc1976 - Użytkownik
- michalc1976
- Użytkownik
- Zarejestrowany: 2017-06-28
Re: Debian 9 i686 - brak ekranu logowania
zbig napisał(-a):
Albo nie ma doinstalowanego Greetera do lihgtm skoro lightdm jest uruchomiony a nie widać powłoki.
Wydaje mi się że greeter jest zainstalowany:
Kod:
root@CinkPadR60e:~# apt-get install lightdm-gtk-greeter Reading package lists... Done Building dependency tree Reading state information... Done lightdm-gtk-greeter is already the newest version (2.0.2-1). 0 upgraded, 0 newly installed, 0 to remove and 1 not upgraded.
Ostatnio edytowany przez michalc1976 (2017-06-29 07:00:27)
Offline
#5 2017-06-29 06:59:20
michalc1976 - Użytkownik
- michalc1976
- Użytkownik
- Zarejestrowany: 2017-06-28
Re: Debian 9 i686 - brak ekranu logowania
Yampress napisał(-a):
To trzeba zainstalować gdm3. Skoro się nie uruchamia t o nie jest zainstalowany.
Po zainstalowaniu pakietu gdm3
Kod:
apt-get install gdm3
i wybraniu jego jako domyślnego managera komputer nie przechodzi nawet do trybu graficznego. Po restarcie cały czas jest tryb tekstowy (nie mogę nic wpisać, tak jakby się zawiesił), muszę wcisnąć Ctrl+Alt+F2, zalogować się i wpisać startx.
Ostatnio edytowany przez michalc1976 (2017-06-29 07:05:36)
Offline
#6 2017-06-29 10:30:45
zbig - Użytkownik
- zbig
- Użytkownik
- Zarejestrowany: 2010-02-25
Re: Debian 9 i686 - brak ekranu logowania
michalc1976 napisał(-a):
Po restarcie cały czas jest tryb tekstowy (nie mogę nic wpisać, tak jakby się zawiesił), muszę wcisnąć Ctrl+Alt+F2, zalogować się i wpisać startx.
To wynik tego, że gtk3 uruchamia się na 1 konsoli.
Co do obsługi lightdm można polecić stronę kolegi z forum https://morfikov.github.io/post/menadzer-logowania-lightdm/
Warto wydać także polecenia (jako użytkownik root)
Kod:
systemctl isolate graphical.target systemctl set-default graphical.target
Pierwsze polecenie zmieni bieżący runlevel, a druga ustawi domyślny.
Offline
#7 2017-06-29 19:07:23
michalc1976 - Użytkownik
- michalc1976
- Użytkownik
- Zarejestrowany: 2017-06-28
Re: Debian 9 i686 - brak ekranu logowania
Dziękuję za podpowiedzi, ale nic one nie dały.
Zastanawia mnie jedna rzecz - podczas instalacji, przy wyborze środowiska graficznego zaznaczyłem dwa checkbox'y -"Xfce" oraz "standard system utilities" (czy jakoś podobnie). Czy może być tak że brak ekranu logowania wynika z tego że nie zaznaczyłem pierwszej opcji "Default Debian graphic environment"?
Piszę z pamięci więc nazwy opcji nie są na 100% pewne.
Michał
Offline
#8 2017-06-29 20:19:34
yossarian - Szczawiożerca
- yossarian
- Szczawiożerca
- Skąd: Shangri-La
- Zarejestrowany: 2011-04-25
Re: Debian 9 i686 - brak ekranu logowania
Yampress napisał(-a):
To trzeba zainstalować gdm3. Skoro się nie uruchamia t o nie jest zainstalowany.
Niby admin, a jak coś napiszesz, to witki opadają.
@michalc1976:
Napisz jaką masz kartę graficzną i pokaż log xorga (zawartość pliku /var/log/Xorg.0.log).
Offline
#9 2017-06-29 23:24:47
zbig - Użytkownik
- zbig
- Użytkownik
- Zarejestrowany: 2010-02-25
Re: Debian 9 i686 - brak ekranu logowania
Kolega michalc1976 uruchamia tryb graficzny tle, że za pomocą polecenia startx a chce od razu graficznie :)
Sprawdź polecenia (polecenie po znaku $, poniżej wynik jaki jest u mnie)
Kod:
$ systemctl get-default graphical.target
Kod:
$ systemctl list-unit-files lightdm.service UNIT FILE STATE lightdm.service enabled
Kod:
$ systemctl list-units lightdm.service UNIT LOAD ACTIVE SUB DESCRIPTION lightdm.service loaded active running Light Display Manager
Offline
#10 2017-06-30 07:54:24
Miras - Użytkownik
- Miras
- Użytkownik
- Skąd: Siewierz
- Zarejestrowany: 2013-08-06
Re: Debian 9 i686 - brak ekranu logowania
michalc1976 napisał(-a):
Czy może być tak że brak ekranu logowania wynika z tego że nie zaznaczyłem pierwszej opcji "Default Debian graphic environment"?
Sprawdź i już. Najwyżej stracisz do 1h czasu. Ja zawsze to zaznaczam, nigdy nie próbowałem bez, nigdy też nie wnikałem co to za 'składniki' Jak nie pomoże to spróbuj jeszcze inne środowisko, np LXDE.
Offline
#11 2017-06-30 08:15:37
macios4x - Użytkownik
- macios4x
- Użytkownik
- Zarejestrowany: 2012-12-10
Re: Debian 9 i686 - brak ekranu logowania
A przepraszam, nawiążę do tematu autora.. Czy jest w ogóle Debian i686??
Zwolennik Open Source, użytkownik Arch, Debian
Offline
#12 2017-06-30 08:58:01
Pakos - Członek DUG
Re: Debian 9 i686 - brak ekranu logowania
macios4x napisał(-a):
A przepraszam, nawiążę do tematu autora.. Czy jest w ogóle Debian i686??
https://lists.debian.org/debian-devel-announce/2016/05/msg00001.html
Offline
#13 2017-06-30 09:14:18
macios4x - Użytkownik
- macios4x
- Użytkownik
- Zarejestrowany: 2012-12-10
Re: Debian 9 i686 - brak ekranu logowania
Pakos napisał(-a):
macios4x napisał(-a):
A przepraszam, nawiążę do tematu autora.. Czy jest w ogóle Debian i686??
https://lists.debian.org/debian-devel-announce/2016/05/msg00001.html
Tzn., o ile dobrze zrozumiałem, jest większe wsparcie dla i686, ale nie całkowite tj. np. Arch i686?
Zwolennik Open Source, użytkownik Arch, Debian
Offline
#14 2017-06-30 09:56:44
arecki - Użytkownik
- arecki
- Użytkownik
- Skąd: 44 Bronson Lane Hensonville
- Zarejestrowany: 2016-03-03
Re: Debian 9 i686 - brak ekranu logowania
To znaczy, że na najnowszym Debianie dla i386 trzeba mieć procesor minimum i686, więc w zasadzie ta wersja Debiana powinna się nazywać i686.
Swoją drogą jaki to ma związek z wątkiem autora to nie wiem.
Ostatnio edytowany przez arecki (2017-06-30 10:01:05)
Offline
#15 2017-06-30 15:59:49
michalc1976 - Użytkownik
- michalc1976
- Użytkownik
- Zarejestrowany: 2017-06-28
Re: Debian 9 i686 - brak ekranu logowania
Miras napisał(-a):
michalc1976 napisał(-a):
Czy może być tak że brak ekranu logowania wynika z tego że nie zaznaczyłem pierwszej opcji "Default Debian graphic environment"?
Sprawdź i już. Najwyżej stracisz do 1h czasu. Ja zawsze to zaznaczam, nigdy nie próbowałem bez, nigdy też nie wnikałem co to za 'składniki' Jak nie pomoże to spróbuj jeszcze inne środowisko, np LXDE.
Zainstalowałem jeszcze raz, z zaznaczoną pierwszą opcją. Niestety, bez zmian.
Offline
#16 2017-06-30 16:03:09
michalc1976 - Użytkownik
- michalc1976
- Użytkownik
- Zarejestrowany: 2017-06-28
Re: Debian 9 i686 - brak ekranu logowania
yossarian napisał(-a):
Yampress napisał(-a):
To trzeba zainstalować gdm3. Skoro się nie uruchamia t o nie jest zainstalowany.
Niby admin, a jak coś napiszesz, to witki opadają.
@michalc1976:
Napisz jaką masz kartę graficzną i pokaż log xorga (zawartość pliku /var/log/Xorg.0.log).
Wynik polecenia lspci:
Kod:
michalc@CinkPadR60e:~$ lspci 00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03) 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03) 00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 02) 00:1c.1 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 2 (rev 02) 00:1c.2 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 3 (rev 02) 00:1c.3 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 4 (rev 02) 00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 (rev 02) 00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 (rev 02) 00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 (rev 02) 00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 (rev 02) 00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02) 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02) 00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7-M Family) SATA Controller [AHCI mode] (rev 02) 00:1f.3 SMBus: Intel Corporation NM10/ICH7 Family SMBus Controller (rev 02) 02:00.0 Ethernet controller: Broadcom Limited NetXtreme BCM5751M Gigabit Ethernet PCI Express (rev 21) 03:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02) 15:00.0 CardBus bridge: Texas Instruments PCI1510 PC card Cardbus Controller
Zawartość pliku /var/log/Xorg.0.log
Kod:
[ 9.679]
X.Org X Server 1.19.2
Release Date: 2017-03-02
[ 9.679] X Protocol Version 11, Revision 0
[ 9.679] Build Operating System: Linux 3.16.0-4-amd64 i686 Debian
[ 9.679] Current Operating System: Linux CinkPadR60e 4.9.0-3-686-pae #1 SMP Debian 4.9.30-2+deb9u2 (2017-06-26) i686
[ 9.679] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-3-686-pae root=UUID=ba5288c5-ae4e-4051-ba7c-51136c8d7fd1 ro quiet
[ 9.679] Build Date: 03 March 2017 03:15:35PM
[ 9.679] xorg-server 2:1.19.2-1 (https://www.debian.org/support)
[ 9.679] Current version of pixman: 0.34.0
[ 9.679] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 9.679] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 9.679] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jun 30 15:42:56 2017
[ 9.688] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 9.691] (==) No Layout section. Using the first Screen section.
[ 9.691] (==) No screen section available. Using defaults.
[ 9.691] (**) |-->Screen "Default Screen Section" (0)
[ 9.691] (**) | |-->Monitor "<default monitor>"
[ 9.693] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 9.694] (==) Automatically adding devices
[ 9.694] (==) Automatically enabling devices
[ 9.694] (==) Automatically adding GPU devices
[ 9.694] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 9.701] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 9.701] Entry deleted from font path.
[ 9.710] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 9.710] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 9.710] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 9.710] (II) Loader magic: 0x80289720
[ 9.710] (II) Module ABI versions:
[ 9.710] X.Org ANSI C Emulation: 0.4
[ 9.710] X.Org Video Driver: 23.0
[ 9.710] X.Org XInput driver : 24.1
[ 9.710] X.Org Server Extension : 10.0
[ 9.713] (++) using VT number 7
[ 9.713] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 9.714] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 9.722] (--) PCI:*(0:0:2:0) 8086:27a2:17aa:201a rev 3, Mem @ 0xee100000/524288, 0xd0000000/268435456, 0xee200000/262144, I/O @ 0x00001800/8, BIOS @ 0x????????/131072
[ 9.722] (--) PCI: (0:0:2:1) 8086:27a6:17aa:201a rev 3, Mem @ 0xee180000/524288
[ 9.723] (II) LoadModule: "glx"
[ 9.724] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 9.743] (II) Module glx: vendor="X.Org Foundation"
[ 9.743] compiled for 1.19.2, module version = 1.0.0
[ 9.743] ABI class: X.Org Server Extension, version 10.0
[ 9.743] (==) Matched intel as autoconfigured driver 0
[ 9.743] (==) Matched intel as autoconfigured driver 1
[ 9.743] (==) Matched modesetting as autoconfigured driver 2
[ 9.743] (==) Matched fbdev as autoconfigured driver 3
[ 9.743] (==) Matched vesa as autoconfigured driver 4
[ 9.743] (==) Assigned the driver to the xf86ConfigLayout
[ 9.743] (II) LoadModule: "intel"
[ 9.743] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 9.751] (II) Module intel: vendor="X.Org Foundation"
[ 9.751] compiled for 1.19.0, module version = 2.99.917
[ 9.751] Module class: X.Org Video Driver
[ 9.751] ABI class: X.Org Video Driver, version 23.0
[ 9.751] (II) LoadModule: "modesetting"
[ 9.751] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 9.753] (II) Module modesetting: vendor="X.Org Foundation"
[ 9.753] compiled for 1.19.2, module version = 1.19.2
[ 9.753] Module class: X.Org Video Driver
[ 9.753] ABI class: X.Org Video Driver, version 23.0
[ 9.753] (II) LoadModule: "fbdev"
[ 9.753] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 9.754] (II) Module fbdev: vendor="X.Org Foundation"
[ 9.754] compiled for 1.19.0, module version = 0.4.4
[ 9.754] Module class: X.Org Video Driver
[ 9.754] ABI class: X.Org Video Driver, version 23.0
[ 9.754] (II) LoadModule: "vesa"
[ 9.754] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 9.756] (II) Module vesa: vendor="X.Org Foundation"
[ 9.756] compiled for 1.19.0, module version = 2.3.4
[ 9.756] Module class: X.Org Video Driver
[ 9.756] ABI class: X.Org Video Driver, version 23.0
[ 9.756] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 9.756] (II) intel: Driver for Intel(R) HD Graphics
[ 9.756] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[ 9.756] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[ 9.756] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 9.756] (II) FBDEV: driver for framebuffer: fbdev
[ 9.756] (II) VESA: driver for VESA chipsets: vesa
[ 9.772] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20160919
[ 9.772] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.99.917+git20161206-1 (Timo Aaltonen <tjaalton@debian.org>)
[ 9.772] (II) intel(0): SNA compiled for use with valgrind
[ 9.774] (WW) Falling back to old probe method for modesetting
[ 9.774] (WW) Falling back to old probe method for fbdev
[ 9.774] (II) Loading sub module "fbdevhw"
[ 9.774] (II) LoadModule: "fbdevhw"
[ 9.774] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 9.775] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 9.775] compiled for 1.19.2, module version = 0.0.2
[ 9.775] ABI class: X.Org Video Driver, version 23.0
[ 9.775] (WW) Falling back to old probe method for vesa
[ 9.777] (--) intel(0): Integrated Graphics Chipset: Intel(R) 945GM
[ 9.777] (--) intel(0): CPU: x86, sse2, sse3; using a maximum of 2 threads
[ 9.777] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 9.777] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 9.777] (==) intel(0): RGB weight 888
[ 9.777] (==) intel(0): Default visual is TrueColor
[ 9.777] (II) intel(0): Output LVDS1 has no monitor section
[ 9.777] (**) intel(0): Found backlight control interface intel_backlight (type 'raw') for output LVDS1
[ 9.777] (II) intel(0): Enabled output LVDS1
[ 9.777] (II) intel(0): Output VGA1 has no monitor section
[ 9.778] (II) intel(0): Enabled output VGA1
[ 9.778] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 9.778] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 9.778] (II) intel(0): Enabled output VIRTUAL1
[ 9.778] (--) intel(0): Output LVDS1 using initial mode 1024x768 on pipe 1
[ 9.778] (--) intel(0): Output VGA1 using initial mode 1920x1200 on pipe 0
[ 9.778] (==) intel(0): TearFree disabled
[ 9.778] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[ 9.778] (==) intel(0): DPI set to (96, 96)
[ 9.778] (II) Loading sub module "dri3"
[ 9.778] (II) LoadModule: "dri3"
[ 9.778] (II) Module "dri3" already built-in
[ 9.778] (II) Loading sub module "dri2"
[ 9.778] (II) LoadModule: "dri2"
[ 9.778] (II) Module "dri2" already built-in
[ 9.778] (II) Loading sub module "present"
[ 9.778] (II) LoadModule: "present"
[ 9.778] (II) Module "present" already built-in
[ 9.778] (II) UnloadModule: "modesetting"
[ 9.778] (II) Unloading modesetting
[ 9.778] (II) UnloadModule: "fbdev"
[ 9.778] (II) Unloading fbdev
[ 9.779] (II) UnloadSubModule: "fbdevhw"
[ 9.779] (II) Unloading fbdevhw
[ 9.779] (II) UnloadModule: "vesa"
[ 9.779] (II) Unloading vesa
[ 9.779] (==) Depth 24 pixmap format is 32 bpp
[ 9.783] (II) intel(0): SNA initialized with Alviso (gen3) backend
[ 9.783] (==) intel(0): Backing store enabled
[ 9.783] (==) intel(0): Silken mouse enabled
[ 9.784] (II) intel(0): HW Cursor enabled
[ 9.784] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 9.785] (==) intel(0): DPMS enabled
[ 9.785] (==) intel(0): Display hotplug detection enabled
[ 9.788] (II) intel(0): [XvMC] i915_xvmc driver initialized.
[ 9.788] (II) intel(0): [DRI2] Setup complete
[ 9.788] (II) intel(0): [DRI2] DRI driver: i915
[ 9.788] (II) intel(0): [DRI2] VDPAU driver: va_gl
[ 9.788] (II) intel(0): direct rendering: DRI2 enabled
[ 9.788] (II) intel(0): hardware support for Present enabled
[ 9.788] (--) RandR disabled
[ 9.802] (II) SELinux: Disabled on system
[ 9.839] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 9.839] (II) AIGLX: enabled GLX_ARB_create_context
[ 9.839] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 9.839] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[ 9.839] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 9.839] (II) AIGLX: enabled GLX_SGI_swap_control
[ 9.839] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 9.839] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 9.839] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[ 9.839] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 9.839] (II) AIGLX: Loaded and initialized i915
[ 9.839] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 9.857] (II) intel(0): switch to mode 1920x1200@60.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 9.866] (II) intel(0): switch to mode 1024x768@60.0 on LVDS1 using pipe 1, position (0, 0), rotation normal, reflection none
[ 9.882] (II) intel(0): Setting screen physical size to 507 x 317
[ 10.013] (II) config/udev: Adding input device Power Button (/dev/input/event7)
[ 10.013] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 10.013] (II) LoadModule: "libinput"
[ 10.014] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 10.025] (II) Module libinput: vendor="X.Org Foundation"
[ 10.025] compiled for 1.19.0, module version = 0.23.0
[ 10.025] Module class: X.Org XInput Driver
[ 10.025] ABI class: X.Org XInput driver, version 24.1
[ 10.025] (II) Using input driver 'libinput' for 'Power Button'
[ 10.025] (**) Power Button: always reports core events
[ 10.025] (**) Option "Device" "/dev/input/event7"
[ 10.026] (**) Option "_source" "server/udev"
[ 10.026] (II) input device 'Power Button', /dev/input/event7 is tagged by udev as: Keyboard
[ 10.027] (II) input device 'Power Button', /dev/input/event7 is a keyboard
[ 10.040] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input8/event7"
[ 10.040] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 10.040] (**) Option "xkb_model" "pc105"
[ 10.040] (**) Option "xkb_layout" "pl"
[ 10.087] (II) input device 'Power Button', /dev/input/event7 is tagged by udev as: Keyboard
[ 10.087] (II) input device 'Power Button', /dev/input/event7 is a keyboard
[ 10.087] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[ 10.087] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 10.087] (II) Using input driver 'libinput' for 'Video Bus'
[ 10.088] (**) Video Bus: always reports core events
[ 10.088] (**) Option "Device" "/dev/input/event8"
[ 10.088] (**) Option "_source" "server/udev"
[ 10.088] (II) input device 'Video Bus', /dev/input/event8 is tagged by udev as: Keyboard
[ 10.088] (II) input device 'Video Bus', /dev/input/event8 is a keyboard
[ 10.104] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9/event8"
[ 10.104] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 10.104] (**) Option "xkb_model" "pc105"
[ 10.104] (**) Option "xkb_layout" "pl"
[ 10.105] (II) input device 'Video Bus', /dev/input/event8 is tagged by udev as: Keyboard
[ 10.105] (II) input device 'Video Bus', /dev/input/event8 is a keyboard
[ 10.106] (II) config/udev: Adding input device Lid Switch (/dev/input/event5)
[ 10.106] (II) No input driver specified, ignoring this device.
[ 10.106] (II) This device may have been added with another device file.
[ 10.107] (II) config/udev: Adding input device Sleep Button (/dev/input/event6)
[ 10.107] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 10.107] (II) Using input driver 'libinput' for 'Sleep Button'
[ 10.107] (**) Sleep Button: always reports core events
[ 10.107] (**) Option "Device" "/dev/input/event6"
[ 10.107] (**) Option "_source" "server/udev"
[ 10.108] (II) input device 'Sleep Button', /dev/input/event6 is tagged by udev as: Keyboard
[ 10.108] (II) input device 'Sleep Button', /dev/input/event6 is a keyboard
[ 10.128] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input7/event6"
[ 10.128] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 10.128] (**) Option "xkb_model" "pc105"
[ 10.128] (**) Option "xkb_layout" "pl"
[ 10.129] (II) input device 'Sleep Button', /dev/input/event6 is tagged by udev as: Keyboard
[ 10.129] (II) input device 'Sleep Button', /dev/input/event6 is a keyboard
[ 10.130] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event10)
[ 10.130] (II) No input driver specified, ignoring this device.
[ 10.130] (II) This device may have been added with another device file.
[ 10.131] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/event1)
[ 10.131] (**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "libinput pointer catchall"
[ 10.131] (II) Using input driver 'libinput' for 'Logitech USB-PS/2 Optical Mouse'
[ 10.131] (**) Logitech USB-PS/2 Optical Mouse: always reports core events
[ 10.131] (**) Option "Device" "/dev/input/event1"
[ 10.131] (**) Option "_source" "server/udev"
[ 10.193] (II) input device 'Logitech USB-PS/2 Optical Mouse', /dev/input/event1 is tagged by udev as: Mouse
[ 10.193] (II) Device 'Logitech USB-PS/2 Optical Mouse' set to 400 DPI
[ 10.193] (II) input device 'Logitech USB-PS/2 Optical Mouse', /dev/input/event1 is a pointer caps
[ 10.224] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/0003:046D:C03E.0001/input/input3/event1"
[ 10.224] (II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE, id 9)
[ 10.224] (**) Option "AccelerationScheme" "none"
[ 10.224] (**) Logitech USB-PS/2 Optical Mouse: (accel) selected scheme none/0
[ 10.224] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration factor: 2.000
[ 10.224] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration threshold: 4
[ 10.284] (II) input device 'Logitech USB-PS/2 Optical Mouse', /dev/input/event1 is tagged by udev as: Mouse
[ 10.285] (II) Device 'Logitech USB-PS/2 Optical Mouse' set to 400 DPI
[ 10.285] (II) input device 'Logitech USB-PS/2 Optical Mouse', /dev/input/event1 is a pointer caps
[ 10.286] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/mouse0)
[ 10.286] (II) No input driver specified, ignoring this device.
[ 10.286] (II) This device may have been added with another device file.
[ 10.288] (II) config/udev: Adding input device BTC USB Multimedia Keyboard (/dev/input/event3)
[ 10.288] (**) BTC USB Multimedia Keyboard: Applying InputClass "libinput keyboard catchall"
[ 10.288] (II) Using input driver 'libinput' for 'BTC USB Multimedia Keyboard'
[ 10.288] (**) BTC USB Multimedia Keyboard: always reports core events
[ 10.288] (**) Option "Device" "/dev/input/event3"
[ 10.288] (**) Option "_source" "server/udev"
[ 10.290] (II) input device 'BTC USB Multimedia Keyboard', /dev/input/event3 is tagged by udev as: Keyboard
[ 10.290] (II) input device 'BTC USB Multimedia Keyboard', /dev/input/event3 is a keyboard
[ 10.328] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/0003:046D:C312.0002/input/input4/event3"
[ 10.328] (II) XINPUT: Adding extended input device "BTC USB Multimedia Keyboard" (type: KEYBOARD, id 10)
[ 10.328] (**) Option "xkb_model" "pc105"
[ 10.328] (**) Option "xkb_layout" "pl"
[ 10.330] (II) input device 'BTC USB Multimedia Keyboard', /dev/input/event3 is tagged by udev as: Keyboard
[ 10.330] (II) input device 'BTC USB Multimedia Keyboard', /dev/input/event3 is a keyboard
[ 10.331] (II) config/udev: Adding input device BTC USB Multimedia Keyboard (/dev/input/event4)
[ 10.331] (**) BTC USB Multimedia Keyboard: Applying InputClass "libinput keyboard catchall"
[ 10.331] (II) Using input driver 'libinput' for 'BTC USB Multimedia Keyboard'
[ 10.332] (**) BTC USB Multimedia Keyboard: always reports core events
[ 10.332] (**) Option "Device" "/dev/input/event4"
[ 10.332] (**) Option "_source" "server/udev"
[ 10.333] (II) input device 'BTC USB Multimedia Keyboard', /dev/input/event4 is tagged by udev as: Keyboard
[ 10.333] (II) input device 'BTC USB Multimedia Keyboard', /dev/input/event4 is a keyboard
[ 10.368] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.1/0003:046D:C312.0003/input/input5/event4"
[ 10.368] (II) XINPUT: Adding extended input device "BTC USB Multimedia Keyboard" (type: KEYBOARD, id 11)
[ 10.368] (**) Option "xkb_model" "pc105"
[ 10.368] (**) Option "xkb_layout" "pl"
[ 10.370] (II) input device 'BTC USB Multimedia Keyboard', /dev/input/event4 is tagged by udev as: Keyboard
[ 10.370] (II) input device 'BTC USB Multimedia Keyboard', /dev/input/event4 is a keyboard
[ 10.371] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 10.371] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 10.371] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 10.371] (**) AT Translated Set 2 keyboard: always reports core events
[ 10.371] (**) Option "Device" "/dev/input/event0"
[ 10.371] (**) Option "_source" "server/udev"
[ 10.388] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[ 10.388] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[ 10.420] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 10.420] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[ 10.420] (**) Option "xkb_model" "pc105"
[ 10.420] (**) Option "xkb_layout" "pl"
[ 10.421] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[ 10.421] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[ 10.422] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event2)
[ 10.422] (**) TPPS/2 IBM TrackPoint: Applying InputClass "libinput pointer catchall"
[ 10.422] (II) Using input driver 'libinput' for 'TPPS/2 IBM TrackPoint'
[ 10.423] (**) TPPS/2 IBM TrackPoint: always reports core events
[ 10.423] (**) Option "Device" "/dev/input/event2"
[ 10.423] (**) Option "_source" "server/udev"
[ 10.424] (II) input device 'TPPS/2 IBM TrackPoint', /dev/input/event2 is tagged by udev as: Mouse Pointingstick
[ 10.424] (II) input device 'TPPS/2 IBM TrackPoint', /dev/input/event2 is a pointer caps
[ 10.468] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input2/event2"
[ 10.468] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 13)
[ 10.468] (**) Option "AccelerationScheme" "none"
[ 10.468] (**) TPPS/2 IBM TrackPoint: (accel) selected scheme none/0
[ 10.468] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[ 10.468] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[ 10.469] (II) input device 'TPPS/2 IBM TrackPoint', /dev/input/event2 is tagged by udev as: Mouse Pointingstick
[ 10.469] (II) input device 'TPPS/2 IBM TrackPoint', /dev/input/event2 is a pointer caps
[ 10.470] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse1)
[ 10.470] (II) No input driver specified, ignoring this device.
[ 10.470] (II) This device may have been added with another device file.
[ 10.471] (II) config/udev: Adding input device PC Speaker (/dev/input/event11)
[ 10.471] (II) No input driver specified, ignoring this device.
[ 10.471] (II) This device may have been added with another device file.
[ 10.473] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event9)
[ 10.473] (**) ThinkPad Extra Buttons: Applying InputClass "libinput keyboard catchall"
[ 10.473] (II) Using input driver 'libinput' for 'ThinkPad Extra Buttons'
[ 10.473] (**) ThinkPad Extra Buttons: always reports core events
[ 10.473] (**) Option "Device" "/dev/input/event9"
[ 10.473] (**) Option "_source" "server/udev"
[ 10.475] (II) input device 'ThinkPad Extra Buttons', /dev/input/event9 is tagged by udev as: Keyboard
[ 10.475] (II) input device 'ThinkPad Extra Buttons', /dev/input/event9 is a keyboard
[ 10.492] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input10/event9"
[ 10.492] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 14)
[ 10.492] (**) Option "xkb_model" "pc105"
[ 10.492] (**) Option "xkb_layout" "pl"
[ 10.493] (II) input device 'ThinkPad Extra Buttons', /dev/input/event9 is tagged by udev as: Keyboard
[ 10.493] (II) input device 'ThinkPad Extra Buttons', /dev/input/event9 is a keyboard
[ 11.778] (II) intel(0): EDID vendor "LEN", prod id 16448
[ 11.779] (II) intel(0): Printing DDC gathered Modelines:
[ 11.779] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz eP)
[ 11.779] (II) intel(0): Modeline "1024x768"x0.0 54.16 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (40.3 kHz e)
[ 11.779] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 11.779] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 14.496] (II) AIGLX: Suspending AIGLX clients for VT switchOffline
#17 2017-06-30 16:06:35
michalc1976 - Użytkownik
- michalc1976
- Użytkownik
- Zarejestrowany: 2017-06-28
Re: Debian 9 i686 - brak ekranu logowania
zbig napisał(-a):
Kolega michalc1976 uruchamia tryb graficzny tle, że za pomocą polecenia startx a chce od razu graficznie :)
Sprawdź polecenia (polecenie po znaku $, poniżej wynik jaki jest u mnie)Kod:
$ systemctl get-default graphical.targetKod:
$ systemctl list-unit-files lightdm.service UNIT FILE STATE lightdm.service enabledKod:
$ systemctl list-units lightdm.service UNIT LOAD ACTIVE SUB DESCRIPTION lightdm.service loaded active running Light Display Manager
U mnie wszystko jest tak samo.
Offline
#18 2017-06-30 18:03:08
yossarian - Szczawiożerca
- yossarian
- Szczawiożerca
- Skąd: Shangri-La
- Zarejestrowany: 2011-04-25
Re: Debian 9 i686 - brak ekranu logowania
zbig napisał(-a):
Kolega michalc1976 uruchamia tryb graficzny tle, że za pomocą polecenia startx a chce od razu graficznie :)
Chyba nie do końca zrozumiałeś:
Po zainstalowaniu nie mam ekranu logowania, tzn. włącza się tryb graficzny i jest czarny kursor na czarnym tle. Muszę przejść do konsoli, zalogować się, wpisać startx i dopiero wszystko jest ok.
@michalc1976:
Wrzuć jeszcze wynik dmesg
gdm3 odinstalowany?
Offline
#19 2017-06-30 19:57:09
michalc1976 - Użytkownik
- michalc1976
- Użytkownik
- Zarejestrowany: 2017-06-28
Re: Debian 9 i686 - brak ekranu logowania
@michalc1976:
Wrzuć jeszcze wynik dmesg
gdm3 odinstalowany?
Wynik dmesg:
Kod:
[ 0.000000] Linux version 4.9.0-3-686-pae (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18) ) #1 SMP Debian 4.9.30-2+deb9u2 (2017-06-26)
[ 0.000000] Disabled fast string operations
[ 0.000000] x86/fpu: Legacy x87 FPU detected.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000d2000-0x00000000000d3fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf6dffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf6e0000-0x00000000bf6eefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bf6ef000-0x00000000bf6fffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bf700000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed14000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: LENOVO 0657KFG/0657KFG, BIOS 7EETD0WW (2.20 ) 05/28/2008
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0xbf6e0 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DBFFF uncachable
[ 0.000000] DC000-DFFFF write-back
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0BF700000 mask FFFF00000 uncachable
[ 0.000000] 3 base 0BF800000 mask FFF800000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86/PAT: PAT not supported by CPU.
[ 0.000000] x86/PAT: Configuration [0-7]: WB WT UC- UC WB WT UC- UC
[ 0.000000] found SMP MP-table at [mem 0x000f68a0-0x000f68af] mapped at [c00f68a0]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x1bdfffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] BRK [0x1ba15000, 0x1ba15fff] PGTABLE
[ 0.000000] BRK [0x1ba16000, 0x1ba17fff] PGTABLE
[ 0.000000] BRK [0x1ba18000, 0x1ba18fff] PGTABLE
[ 0.000000] BRK [0x1ba19000, 0x1ba19fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x35ec1000-0x36f57fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F6860 000024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 0x00000000BF6E57D8 00008C (v01 LENOVO TP-7E 00002200 LTP 00000000)
[ 0.000000] ACPI: FACP 0x00000000BF6E5900 0000F4 (v03 LENOVO TP-7E 00002200 LNVO 00000001)
[ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20160831/tbfadt-603)
[ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Gpe1Block has valid Address but zero Length: 0x000000000000102C/0x0 (20160831/tbfadt-658)
[ 0.000000] ACPI: DSDT 0x00000000BF6E5C5E 008FB1 (v01 LENOVO TP-7E 00002200 MSFT 0100000E)
[ 0.000000] ACPI: FACS 0x00000000BF6F4000 000040
[ 0.000000] ACPI: FACS 0x00000000BF6F4000 000040
[ 0.000000] ACPI: SSDT 0x00000000BF6E5AB4 0001AA (v01 LENOVO TP-7E 00002200 MSFT 0100000E)
[ 0.000000] ACPI: ECDT 0x00000000BF6EEC0F 000052 (v01 LENOVO TP-7E 00002200 LNVO 00000001)
[ 0.000000] ACPI: TCPA 0x00000000BF6EEC61 000032 (v02 LENOVO TP-7E 00002200 LNVO 00000001)
[ 0.000000] ACPI: APIC 0x00000000BF6EEC93 000068 (v01 LENOVO TP-7E 00002200 LNVO 00000001)
[ 0.000000] ACPI: MCFG 0x00000000BF6EECFB 00003C (v01 LENOVO TP-7E 00002200 LNVO 00000001)
[ 0.000000] ACPI: HPET 0x00000000BF6EED37 000038 (v01 LENOVO TP-7E 00002200 LNVO 00000001)
[ 0.000000] ACPI: SLIC 0x00000000BF6EEE62 000176 (v01 LENOVO TP-7E 00002200 LTP 00000000)
[ 0.000000] ACPI: BOOT 0x00000000BF6EEFD8 000028 (v01 LENOVO TP-7E 00002200 LTP 00000001)
[ 0.000000] ACPI: SSDT 0x00000000BF6F2655 00025F (v01 LENOVO TP-7E 00002200 INTL 20050513)
[ 0.000000] ACPI: SSDT 0x00000000BF6F28B4 0000A6 (v01 LENOVO TP-7E 00002200 INTL 20050513)
[ 0.000000] ACPI: SSDT 0x00000000BF6F295A 0004F7 (v01 LENOVO TP-7E 00002200 INTL 20050513)
[ 0.000000] ACPI: SSDT 0x00000000BF6F2E51 0001D8 (v01 LENOVO TP-7E 00002200 INTL 20050513)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 2172MB HIGHMEM available.
[ 0.000000] 889MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 379fe000
[ 0.000000] low ram: 0 - 379fe000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] Normal [mem 0x0000000001000000-0x00000000379fdfff]
[ 0.000000] HighMem [mem 0x00000000379fe000-0x00000000bf6dffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000bf6dffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000000bf6dffff]
[ 0.000000] On node 0 totalpages: 783998
[ 0.000000] free_area_init_node: node 0, pgdat db7e4940, node_mem_map f43d3024
[ 0.000000] DMA zone: 36 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 1967 pages used for memmap
[ 0.000000] Normal zone: 223742 pages, LIFO batch:31
[ 0.000000] HighMem zone: 556258 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] Reserving Intel graphics memory at 0x00000000bf800000-0x00000000bfffffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000d1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000d2000-0x000d3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000d4000-0x000dbfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000dc000-0x000fffff]
[ 0.000000] e820: [mem 0xc0000000-0xefffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] percpu: Embedded 20 pages/cpu @f79d3000 s50700 r0 d31220 u81920
[ 0.000000] pcpu-alloc: s50700 r0 d31220 u81920 alloc=20*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 781995
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-3-686-pae root=UUID=ba5288c5-ae4e-4051-ba7c-51136c8d7fd1 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000379fe:000bf6e0)
[ 0.000000] Initializing Movable for node 0 (00000000:00000000)
[ 0.000000] Memory: 3080052K/3135992K available (5818K kernel code, 646K rwdata, 1716K rodata, 752K init, 456K bss, 55940K reserved, 0K cma-reserved, 2225032K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB)
.init : 0xdb801000 - 0xdb8bd000 ( 752 kB)
.data : 0xdb5aeef2 - 0xdb7ff9c0 (2370 kB)
.text : 0xdb000000 - 0xdb5aeef2 (5819 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
[ 0.000000] NR_IRQS:2304 nr_irqs:440 16
[ 0.000000] CPU 0 irqstacks, hard=f742e000 soft=f7430000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration failed
[ 0.000000] tsc: PIT calibration matches HPET. 1 loops
[ 0.000000] tsc: Detected 1662.508 MHz processor
[ 0.008013] Calibrating delay loop (skipped), value calculated using timer frequency.. 3325.01 BogoMIPS (lpj=6650032)
[ 0.008018] pid_max: default: 32768 minimum: 301
[ 0.008053] ACPI: Core revision 20160831
[ 0.026277] ACPI: 6 ACPI AML tables successfully acquired and loaded
[ 0.026340] Security Framework initialized
[ 0.026342] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.026355] AppArmor: AppArmor disabled by boot time parameter
[ 0.026382] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.026384] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.026832] Disabled fast string operations
[ 0.026836] CPU: Physical Processor ID: 0
[ 0.026837] CPU: Processor Core ID: 0
[ 0.026843] mce: CPU supports 6 MCE banks
[ 0.026852] CPU0: Thermal monitoring enabled (TM2)
[ 0.026859] process: using mwait in idle threads
[ 0.026868] Last level iTLB entries: 4KB 128, 2MB 0, 4MB 2
[ 0.026870] Last level dTLB entries: 4KB 128, 2MB 0, 4MB 8, 1GB 0
[ 0.027181] Freeing SMP alternatives memory: 24K (db8bd000 - db8c3000)
[ 0.032009] ftrace: allocating 24025 entries in 47 pages
[ 0.044137] smpboot: Max logical packages: 1
[ 0.044146] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.044629] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.088000] smpboot: CPU0: Intel(R) Core(TM) Duo CPU T2300 @ 1.66GHz (family: 0x6, model: 0xe, stepping: 0xc)
[ 0.088000] Performance Events: Core events, core PMU driver.
[ 0.088000] ... version: 1
[ 0.088000] ... bit width: 40
[ 0.088000] ... generic registers: 2
[ 0.088000] ... value mask: 000000ffffffffff
[ 0.088000] ... max period: 000000007fffffff
[ 0.088000] ... fixed-purpose events: 0
[ 0.088000] ... event mask: 0000000000000003
[ 0.088000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.088000] CPU 1 irqstacks, hard=f755e000 soft=f7560000
[ 0.088000] x86: Booting SMP configuration:
[ 0.088000] .... node #0, CPUs: #1
[ 0.012000] Initializing CPU#1
[ 0.012000] Disabled fast string operations
[ 0.166014] TSC synchronization [CPU#0 -> CPU#1]:
[ 0.166016] Measured 473890 cycles TSC warp between CPUs, turning off TSC clock.
[ 0.166028] tsc: Marking TSC unstable due to check_tsc_sync_source failed
[ 0.166113] x86: Booted up 1 node, 2 CPUs
[ 0.166113] smpboot: Total of 2 processors activated (6650.01 BogoMIPS)
[ 0.168067] devtmpfs: initialized
[ 0.168404] PM: Registering ACPI NVS region [mem 0xbf6ef000-0xbf6fffff] (69632 bytes)
[ 0.168404] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.168404] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.168404] pinctrl core: initialized pinctrl subsystem
[ 0.168440] NET: Registered protocol family 16
[ 0.176008] cpuidle: using governor ladder
[ 0.188006] cpuidle: using governor menu
[ 0.188059] Simple Boot Flag at 0x35 set to 0x1
[ 0.188073] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.188075] ACPI: bus type PCI registered
[ 0.188077] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.188182] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.188185] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.188187] PCI: Using MMCONFIG for extended config space
[ 0.188188] PCI: Using configuration type 1 for base access
[ 0.188332] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.188333] mtrr: probably your BIOS does not setup all CPUs.
[ 0.188334] mtrr: corrected configuration.
[ 0.200058] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.200111] ACPI: Added _OSI(Module Device)
[ 0.200113] ACPI: Added _OSI(Processor Device)
[ 0.200115] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.200117] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.200121] ACPI : EC: EC started
[ 0.200122] ACPI : EC: interrupt blocked
[ 0.204123] ACPI: \: Used as first EC
[ 0.204126] ACPI: \: GPE=0x1c, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.204128] ACPI: \: Used as boot ECDT EC to handle transactions
[ 0.216539] ACPI: Dynamic OEM Table Load:
[ 0.216551] ACPI: SSDT 0x00000000F75DF400 000240 (v01 PmRef Cpu0Ist 00000100 INTL 20050513)
[ 0.216935] ACPI: Dynamic OEM Table Load:
[ 0.216945] ACPI: SSDT 0x00000000F75E3000 00065A (v01 PmRef Cpu0Cst 00000100 INTL 20050513)
[ 0.217641] ACPI: Dynamic OEM Table Load:
[ 0.217648] ACPI: SSDT 0x00000000F7539600 0000C8 (v01 PmRef Cpu1Ist 00000100 INTL 20050513)
[ 0.217882] ACPI: Dynamic OEM Table Load:
[ 0.217889] ACPI: SSDT 0x00000000F74AD780 000085 (v01 PmRef Cpu1Cst 00000100 INTL 20050513)
[ 0.218482] ACPI : EC: EC stopped
[ 0.218483] ACPI : EC: EC started
[ 0.218484] ACPI : EC: interrupt blocked
[ 0.218810] ACPI: \_SB_.PCI0.LPC_.EC__: Used as first EC
[ 0.218813] ACPI: \_SB_.PCI0.LPC_.EC__: GPE=0x1c, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.218815] ACPI: \_SB_.PCI0.LPC_.EC__: Used as boot DSDT EC to handle transactions
[ 0.218816] ACPI: Interpreter enabled
[ 0.218850] ACPI: (supports S0 S3 S4 S5)
[ 0.218851] ACPI: Using IOAPIC for interrupt routing
[ 0.218890] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.225827] ACPI: Power Resource [PUBS] (on)
[ 0.239774] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.239961] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.240159] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.240343] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.240527] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.240711] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.240895] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.241079] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.241275] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.241282] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.242169] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.242172] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.242179] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.242513] PCI host bridge to bus 0000:00
[ 0.242517] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.242520] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.242522] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.242525] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.242528] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.242530] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[ 0.242534] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.242546] pci 0000:00:00.0: [8086:27a0] type 00 class 0x060000
[ 0.242726] pci 0000:00:02.0: [8086:27a2] type 00 class 0x030000
[ 0.242739] pci 0000:00:02.0: reg 0x10: [mem 0xee100000-0xee17ffff]
[ 0.242746] pci 0000:00:02.0: reg 0x14: [io 0x1800-0x1807]
[ 0.242754] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff pref]
[ 0.242761] pci 0000:00:02.0: reg 0x1c: [mem 0xee200000-0xee23ffff]
[ 0.242935] pci 0000:00:02.1: [8086:27a6] type 00 class 0x038000
[ 0.242945] pci 0000:00:02.1: reg 0x10: [mem 0xee180000-0xee1fffff]
[ 0.243173] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[ 0.243200] pci 0000:00:1b.0: reg 0x10: [mem 0xee240000-0xee243fff 64bit]
[ 0.243315] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.243417] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.243511] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[ 0.243629] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.243721] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.243812] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
[ 0.243929] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.244029] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 0.244120] pci 0000:00:1c.2: [8086:27d4] type 01 class 0x060400
[ 0.244237] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.244328] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.244423] pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400
[ 0.244540] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.244631] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.244725] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[ 0.244782] pci 0000:00:1d.0: reg 0x20: [io 0x1820-0x183f]
[ 0.247073] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.247163] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[ 0.247221] pci 0000:00:1d.1: reg 0x20: [io 0x1840-0x185f]
[ 0.247354] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.247442] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[ 0.247499] pci 0000:00:1d.2: reg 0x20: [io 0x1860-0x187f]
[ 0.247631] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.247722] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[ 0.247779] pci 0000:00:1d.3: reg 0x20: [io 0x1880-0x189f]
[ 0.247966] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[ 0.247989] pci 0000:00:1d.7: reg 0x10: [mem 0xee444000-0xee4443ff]
[ 0.248101] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.248181] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.248274] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.248425] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.248516] pci 0000:00:1f.0: [8086:27b9] type 00 class 0x060100
[ 0.248634] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.248640] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
[ 0.248645] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 1600 (mask 007f)
[ 0.248649] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 15e0 (mask 000f)
[ 0.248654] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 1680 (mask 001f)
[ 0.248837] pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a
[ 0.248855] pci 0000:00:1f.1: reg 0x10: [io 0x0000-0x0007]
[ 0.248867] pci 0000:00:1f.1: reg 0x14: [io 0x0000-0x0003]
[ 0.248880] pci 0000:00:1f.1: reg 0x18: [io 0x0000-0x0007]
[ 0.248892] pci 0000:00:1f.1: reg 0x1c: [io 0x0000-0x0003]
[ 0.248904] pci 0000:00:1f.1: reg 0x20: [io 0x1810-0x181f]
[ 0.248931] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.248933] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.248936] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.248938] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.249097] pci 0000:00:1f.2: [8086:27c5] type 00 class 0x010601
[ 0.249119] pci 0000:00:1f.2: reg 0x10: [io 0x18d0-0x18d7]
[ 0.249131] pci 0000:00:1f.2: reg 0x14: [io 0x18c4-0x18c7]
[ 0.249143] pci 0000:00:1f.2: reg 0x18: [io 0x18c8-0x18cf]
[ 0.249156] pci 0000:00:1f.2: reg 0x1c: [io 0x18c0-0x18c3]
[ 0.249168] pci 0000:00:1f.2: reg 0x20: [io 0x18b0-0x18bf]
[ 0.249181] pci 0000:00:1f.2: reg 0x24: [mem 0xee444400-0xee4447ff]
[ 0.249240] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.249403] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[ 0.249477] pci 0000:00:1f.3: reg 0x20: [io 0x18e0-0x18ff]
[ 0.249816] pci 0000:02:00.0: [14e4:167d] type 00 class 0x020000
[ 0.249854] pci 0000:02:00.0: reg 0x10: [mem 0xee000000-0xee00ffff 64bit]
[ 0.250048] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 0.260071] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.260080] pci 0000:00:1c.0: bridge window [mem 0xee000000-0xee0fffff]
[ 0.260267] pci 0000:03:00.0: [8086:4227] type 00 class 0x028000
[ 0.260335] pci 0000:03:00.0: reg 0x10: [mem 0xedf00000-0xedf00fff]
[ 0.260778] pci 0000:03:00.0: PME# supported from D0 D3hot
[ 0.272081] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.272086] pci 0000:00:1c.1: bridge window [io 0x2000-0x3fff]
[ 0.272092] pci 0000:00:1c.1: bridge window [mem 0xec000000-0xedffffff]
[ 0.272100] pci 0000:00:1c.1: bridge window [mem 0xe4000000-0xe40fffff 64bit pref]
[ 0.272225] pci 0000:00:1c.2: PCI bridge to [bus 04-0b]
[ 0.272230] pci 0000:00:1c.2: bridge window [io 0x4000-0x5fff]
[ 0.272236] pci 0000:00:1c.2: bridge window [mem 0xe8000000-0xe9ffffff]
[ 0.272244] pci 0000:00:1c.2: bridge window [mem 0xe4100000-0xe41fffff 64bit pref]
[ 0.272328] pci 0000:00:1c.3: PCI bridge to [bus 0c-13]
[ 0.272333] pci 0000:00:1c.3: bridge window [io 0x6000-0x7fff]
[ 0.272338] pci 0000:00:1c.3: bridge window [mem 0xea000000-0xebffffff]
[ 0.272347] pci 0000:00:1c.3: bridge window [mem 0xe4200000-0xe42fffff 64bit pref]
[ 0.272455] pci 0000:15:00.0: [104c:ac56] type 02 class 0x060700
[ 0.272483] pci 0000:15:00.0: reg 0x10: [mem 0xe4300000-0xe4300fff]
[ 0.272535] pci 0000:15:00.0: supports D1 D2
[ 0.272538] pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.272706] pci 0000:00:1e.0: PCI bridge to [bus 15-18] (subtractive decode)
[ 0.272712] pci 0000:00:1e.0: bridge window [io 0x8000-0xbfff]
[ 0.272717] pci 0000:00:1e.0: bridge window [mem 0xe4300000-0xe7ffffff]
[ 0.272725] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xe3ffffff 64bit pref]
[ 0.272728] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.272731] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.272734] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.272736] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[ 0.272739] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[ 0.272742] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff window] (subtractive decode)
[ 0.272823] pci_bus 0000:16: busn_res: can not insert [bus 16-ff] under [bus 15-18] (conflicts with (null) [bus 15-18])
[ 0.272829] pci_bus 0000:16: busn_res: [bus 16-ff] end is updated to 17
[ 0.272873] pci_bus 0000:00: on NUMA node 0
[ 0.274853] ACPI: Enabled 2 GPEs in block 00 to 1F
[ 0.274991] ACPI : EC: interrupt unblocked
[ 0.275001] ACPI : EC: event unblocked
[ 0.275010] ACPI: \_SB_.PCI0.LPC_.EC__: GPE=0x1c, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.275013] ACPI: \_SB_.PCI0.LPC_.EC__: Used as boot DSDT EC to handle transactions and events
[ 0.275185] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.275185] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.275185] vgaarb: loaded
[ 0.275185] vgaarb: bridge control possible 0000:00:02.0
[ 0.275185] PCI: Using ACPI for IRQ routing
[ 0.277881] PCI: pci_cache_line_size set to 64 bytes
[ 0.278059] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[ 0.278061] e820: reserve RAM buffer [mem 0xbf6e0000-0xbfffffff]
[ 0.278308] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.278308] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.278308] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.280029] clocksource: Switched to clocksource hpet
[ 0.295660] VFS: Disk quotas dquot_6.6.0
[ 0.295699] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.295866] pnp: PnP ACPI init
[ 0.296826] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.296830] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
[ 0.296833] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
[ 0.296836] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
[ 0.296839] system 00:00: [mem 0x000cc000-0x000cffff] could not be reserved
[ 0.296842] system 00:00: [mem 0x000d0000-0x000d3fff] could not be reserved
[ 0.296845] system 00:00: [mem 0x000dc000-0x000dffff] could not be reserved
[ 0.296848] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
[ 0.296851] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
[ 0.296854] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
[ 0.296858] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
[ 0.296861] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.296864] system 00:00: [mem 0x00100000-0xbfffffff] could not be reserved
[ 0.296867] system 00:00: [mem 0xfec00000-0xffffffff] could not be reserved
[ 0.296874] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.297143] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.297147] system 00:01: [io 0x1000-0x107f] has been reserved
[ 0.297150] system 00:01: [io 0x1180-0x11bf] has been reserved
[ 0.297155] system 00:01: [io 0x0800-0x080f] has been reserved
[ 0.297158] system 00:01: [io 0x15e0-0x15ef] has been reserved
[ 0.297161] system 00:01: [io 0x1600-0x165f] could not be reserved
[ 0.297165] system 00:01: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.297168] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.297172] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.297175] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.297178] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.297181] system 00:01: [mem 0xfed40000-0xfed40fff] has been reserved
[ 0.297186] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.297306] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.297370] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.297429] pnp 00:04: Plug and Play ACPI device, IDs IBM3780 PNP0f13 (active)
[ 0.297901] pnp: PnP ACPI: found 5 devices
[ 0.297905] PnPBIOS: Disabled
[ 0.337101] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.337125] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 0.337131] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[ 0.337187] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.337191] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.337194] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.337197] pci 0000:00:1c.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.337212] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0000000-0xc01fffff 64bit pref]
[ 0.337218] pci 0000:00:1c.0: BAR 13: assigned [io 0xc000-0xcfff]
[ 0.337223] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.337227] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
[ 0.337234] pci 0000:00:1c.0: bridge window [mem 0xee000000-0xee0fffff]
[ 0.337240] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc01fffff 64bit pref]
[ 0.337248] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.337252] pci 0000:00:1c.1: bridge window [io 0x2000-0x3fff]
[ 0.337259] pci 0000:00:1c.1: bridge window [mem 0xec000000-0xedffffff]
[ 0.337264] pci 0000:00:1c.1: bridge window [mem 0xe4000000-0xe40fffff 64bit pref]
[ 0.337272] pci 0000:00:1c.2: PCI bridge to [bus 04-0b]
[ 0.337276] pci 0000:00:1c.2: bridge window [io 0x4000-0x5fff]
[ 0.337283] pci 0000:00:1c.2: bridge window [mem 0xe8000000-0xe9ffffff]
[ 0.337288] pci 0000:00:1c.2: bridge window [mem 0xe4100000-0xe41fffff 64bit pref]
[ 0.337296] pci 0000:00:1c.3: PCI bridge to [bus 0c-13]
[ 0.337300] pci 0000:00:1c.3: bridge window [io 0x6000-0x7fff]
[ 0.337306] pci 0000:00:1c.3: bridge window [mem 0xea000000-0xebffffff]
[ 0.337312] pci 0000:00:1c.3: bridge window [mem 0xe4200000-0xe42fffff 64bit pref]
[ 0.337324] pci 0000:15:00.0: res[15]=[mem 0x04000000-0x03ffffff pref] res_to_dev_res add_size 4000000 min_align 4000000
[ 0.337327] pci 0000:15:00.0: res[15]=[mem 0x04000000-0x07ffffff pref] res_to_dev_res add_size 4000000 min_align 4000000
[ 0.337330] pci 0000:15:00.0: res[16]=[mem 0x04000000-0x03ffffff] res_to_dev_res add_size 4000000 min_align 4000000
[ 0.337333] pci 0000:15:00.0: res[16]=[mem 0x04000000-0x07ffffff] res_to_dev_res add_size 4000000 min_align 4000000
[ 0.337336] pci 0000:15:00.0: res[13]=[io 0x0100-0x00ff] res_to_dev_res add_size 100 min_align 100
[ 0.337339] pci 0000:15:00.0: res[13]=[io 0x0100-0x01ff] res_to_dev_res add_size 100 min_align 100
[ 0.337342] pci 0000:15:00.0: res[14]=[io 0x0100-0x00ff] res_to_dev_res add_size 100 min_align 100
[ 0.337345] pci 0000:15:00.0: res[14]=[io 0x0100-0x01ff] res_to_dev_res add_size 100 min_align 100
[ 0.337350] pci 0000:15:00.0: BAR 15: assigned [mem 0xe0000000-0xe3ffffff pref]
[ 0.337356] pci 0000:15:00.0: BAR 16: assigned [mem 0xc4000000-0xc7ffffff]
[ 0.337359] pci 0000:15:00.0: BAR 13: assigned [io 0x8000-0x80ff]
[ 0.337362] pci 0000:15:00.0: BAR 14: assigned [io 0x8400-0x84ff]
[ 0.337365] pci 0000:15:00.0: CardBus bridge to [bus 16-17]
[ 0.337368] pci 0000:15:00.0: bridge window [io 0x8000-0x80ff]
[ 0.337374] pci 0000:15:00.0: bridge window [io 0x8400-0x84ff]
[ 0.337380] pci 0000:15:00.0: bridge window [mem 0xe0000000-0xe3ffffff pref]
[ 0.337387] pci 0000:15:00.0: bridge window [mem 0xc4000000-0xc7ffffff]
[ 0.337392] pci 0000:00:1e.0: PCI bridge to [bus 15-18]
[ 0.337396] pci 0000:00:1e.0: bridge window [io 0x8000-0xbfff]
[ 0.337403] pci 0000:00:1e.0: bridge window [mem 0xe4300000-0xe7ffffff]
[ 0.337408] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xe3ffffff 64bit pref]
[ 0.337418] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.337420] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.337423] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.337426] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff window]
[ 0.337428] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff window]
[ 0.337431] pci_bus 0000:00: resource 9 [mem 0xc0000000-0xfebfffff window]
[ 0.337434] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
[ 0.337436] pci_bus 0000:02: resource 1 [mem 0xee000000-0xee0fffff]
[ 0.337439] pci_bus 0000:02: resource 2 [mem 0xc0000000-0xc01fffff 64bit pref]
[ 0.337441] pci_bus 0000:03: resource 0 [io 0x2000-0x3fff]
[ 0.337444] pci_bus 0000:03: resource 1 [mem 0xec000000-0xedffffff]
[ 0.337447] pci_bus 0000:03: resource 2 [mem 0xe4000000-0xe40fffff 64bit pref]
[ 0.337449] pci_bus 0000:04: resource 0 [io 0x4000-0x5fff]
[ 0.337452] pci_bus 0000:04: resource 1 [mem 0xe8000000-0xe9ffffff]
[ 0.337454] pci_bus 0000:04: resource 2 [mem 0xe4100000-0xe41fffff 64bit pref]
[ 0.337457] pci_bus 0000:0c: resource 0 [io 0x6000-0x7fff]
[ 0.337460] pci_bus 0000:0c: resource 1 [mem 0xea000000-0xebffffff]
[ 0.337462] pci_bus 0000:0c: resource 2 [mem 0xe4200000-0xe42fffff 64bit pref]
[ 0.337465] pci_bus 0000:15: resource 0 [io 0x8000-0xbfff]
[ 0.337467] pci_bus 0000:15: resource 1 [mem 0xe4300000-0xe7ffffff]
[ 0.337470] pci_bus 0000:15: resource 2 [mem 0xe0000000-0xe3ffffff 64bit pref]
[ 0.337473] pci_bus 0000:15: resource 4 [io 0x0000-0x0cf7 window]
[ 0.337475] pci_bus 0000:15: resource 5 [io 0x0d00-0xffff window]
[ 0.337478] pci_bus 0000:15: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.337480] pci_bus 0000:15: resource 7 [mem 0x000d4000-0x000d7fff window]
[ 0.337483] pci_bus 0000:15: resource 8 [mem 0x000d8000-0x000dbfff window]
[ 0.337486] pci_bus 0000:15: resource 9 [mem 0xc0000000-0xfebfffff window]
[ 0.337488] pci_bus 0000:16: resource 0 [io 0x8000-0x80ff]
[ 0.337491] pci_bus 0000:16: resource 1 [io 0x8400-0x84ff]
[ 0.337493] pci_bus 0000:16: resource 2 [mem 0xe0000000-0xe3ffffff pref]
[ 0.337496] pci_bus 0000:16: resource 3 [mem 0xc4000000-0xc7ffffff]
[ 0.337656] NET: Registered protocol family 2
[ 0.337944] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.337975] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.338026] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.338060] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.338072] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.338157] NET: Registered protocol family 1
[ 0.338180] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.339493] PCI: CLS mismatch (64 != 32), using 64 bytes
[ 0.339581] Unpacking initramfs...
[ 0.903588] Freeing initrd memory: 16988K (f5ec1000 - f6f58000)
[ 0.903807] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x17f6cde7552, max_idle_ns: 440795210969 ns
[ 0.904528] audit: initializing netlink subsys (disabled)
[ 0.904565] audit: type=2000 audit(1498852120.904:1): initialized
[ 0.905187] workingset: timestamp_bits=14 max_order=20 bucket_order=6
[ 0.905240] zbud: loaded
[ 0.906440] bounce: pool size: 64 pages
[ 0.906464] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 0.906513] io scheduler noop registered
[ 0.906514] io scheduler deadline registered
[ 0.906542] io scheduler cfq registered (default)
[ 0.908061] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.908064] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 0.908071] pcie_pme 0000:00:1c.0:pcie001: service driver pcie_pme loaded
[ 0.908105] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[ 0.908107] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 0.908113] pcie_pme 0000:00:1c.1:pcie001: service driver pcie_pme loaded
[ 0.908144] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[ 0.908150] pcie_pme 0000:00:1c.2:pcie001: service driver pcie_pme loaded
[ 0.908182] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[ 0.908187] pcie_pme 0000:00:1c.3:pcie001: service driver pcie_pme loaded
[ 0.908214] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.908233] pciehp 0000:00:1c.0:pcie004: Slot #2 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+
[ 0.908278] pciehp 0000:00:1c.0:pcie004: service driver pciehp loaded
[ 0.908294] pciehp 0000:00:1c.1:pcie004: Slot #3 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+
[ 0.908333] pciehp 0000:00:1c.1:pcie004: service driver pciehp loaded
[ 0.908349] pciehp 0000:00:1c.2:pcie004: Slot #4 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+
[ 0.908390] pciehp 0000:00:1c.2:pcie004: service driver pciehp loaded
[ 0.908405] pciehp 0000:00:1c.3:pcie004: Slot #5 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+
[ 0.908443] pciehp 0000:00:1c.3:pcie004: service driver pciehp loaded
[ 0.908453] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.908484] intel_idle: does not run on family 6 model 14
[ 0.911561] GHES: HEST is not enabled!
[ 0.911649] isapnp: Scanning for PnP cards...
[ 1.266038] isapnp: No Plug & Play device found
[ 1.266159] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.266912] Linux agpgart interface v0.103
[ 1.267597] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 1.277632] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.277640] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.277899] mousedev: PS/2 mouse device common for all mice
[ 1.277975] rtc_cmos 00:02: RTC can wake from S4
[ 1.278176] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.278210] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.278275] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.279403] NET: Registered protocol family 10
[ 1.279808] mip6: Mobile IPv6
[ 1.279811] NET: Registered protocol family 17
[ 1.279816] mpls_gso: MPLS GSO support
[ 1.280148] microcode: sig=0x6ec, pf=0x20, revision=0x54
[ 1.280247] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.280251] Using IPI No-Shortcut mode
[ 1.280468] registered taskstats version 1
[ 1.280492] zswap: loaded using pool lzo/zbud
[ 1.280672] ima: No TPM chip found, activating TPM-bypass!
[ 1.281294] rtc_cmos 00:02: setting system clock to 2017-06-30 19:48:42 UTC (1498852122)
[ 1.281410] PM: Hibernation image not present or could not be loaded.
[ 1.281863] Freeing unused kernel memory: 752K (db801000 - db8bd000)
[ 1.282009] Write protecting the kernel text: 5820k
[ 1.282124] Write protecting the kernel read-only data: 1724k
[ 1.282126] NX-protecting the kernel data: 4420k
[ 1.282415] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.283601] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.304860] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.304999] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.306637] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.307039] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.309796] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.309924] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.310532] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.310667] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.310798] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.310922] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.366839] pps_core: LinuxPPS API ver. 1 registered
[ 1.366842] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 1.367190] PTP clock support registered
[ 1.367868] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.367870] ACPI: Thermal Zone [THM0] (42 C)
[ 1.368977] tg3.c:v3.137 (May 11, 2014)
[ 1.369562] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.369565] ACPI: Thermal Zone [THM1] (41 C)
[ 1.374730] ACPI: bus type USB registered
[ 1.374778] usbcore: registered new interface driver usbfs
[ 1.374799] usbcore: registered new interface driver hub
[ 1.374871] usbcore: registered new device driver usb
[ 1.375697] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.376717] ehci-pci: EHCI PCI platform driver
[ 1.376935] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 1.376946] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.376963] ehci-pci 0000:00:1d.7: debug port 1
[ 1.380882] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 1.382119] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.382168] ehci-pci 0000:00:1d.7: irq 19, io mem 0xee444000
[ 1.382212] SCSI subsystem initialized
[ 1.385831] libata version 3.00 loaded.
[ 1.396055] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.396182] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.396185] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.396188] usb usb1: Product: EHCI Host Controller
[ 1.396190] usb usb1: Manufacturer: Linux 4.9.0-3-686-pae ehci_hcd
[ 1.396192] usb usb1: SerialNumber: 0000:00:1d.7
[ 1.396454] hub 1-0:1.0: USB hub found
[ 1.396469] hub 1-0:1.0: 8 ports detected
[ 1.397481] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.397491] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.397500] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 1.397542] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001820
[ 1.397646] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.397649] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.397651] usb usb2: Product: UHCI Host Controller
[ 1.397653] usb usb2: Manufacturer: Linux 4.9.0-3-686-pae uhci_hcd
[ 1.397656] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.397872] hub 2-0:1.0: USB hub found
[ 1.397885] hub 2-0:1.0: 2 ports detected
[ 1.398186] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.398194] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.398202] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 1.398236] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001840
[ 1.398327] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.398330] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.398332] usb usb3: Product: UHCI Host Controller
[ 1.398334] usb usb3: Manufacturer: Linux 4.9.0-3-686-pae uhci_hcd
[ 1.398337] usb usb3: SerialNumber: 0000:00:1d.1
[ 1.398737] hub 3-0:1.0: USB hub found
[ 1.398750] hub 3-0:1.0: 2 ports detected
[ 1.399229] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.399237] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.399247] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 1.399284] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[ 1.399521] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.399524] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.399526] usb usb4: Product: UHCI Host Controller
[ 1.399528] usb usb4: Manufacturer: Linux 4.9.0-3-686-pae uhci_hcd
[ 1.399530] usb usb4: SerialNumber: 0000:00:1d.2
[ 1.399909] hub 4-0:1.0: USB hub found
[ 1.399924] hub 4-0:1.0: 2 ports detected
[ 1.400245] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.400253] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 1.400261] uhci_hcd 0000:00:1d.3: detected 2 ports
[ 1.400296] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001880
[ 1.400763] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.400766] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.400768] usb usb5: Product: UHCI Host Controller
[ 1.400770] usb usb5: Manufacturer: Linux 4.9.0-3-686-pae uhci_hcd
[ 1.400772] usb usb5: SerialNumber: 0000:00:1d.3
[ 1.401214] hub 5-0:1.0: USB hub found
[ 1.401588] hub 5-0:1.0: 2 ports detected
[ 1.402765] ata_piix 0000:00:1f.1: version 2.13
[ 1.403937] scsi host0: ata_piix
[ 1.412100] scsi host1: ata_piix
[ 1.412218] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[ 1.412221] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[ 1.412301] ahci 0000:00:1f.2: version 3.0
[ 1.412558] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode
[ 1.412562] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[ 1.420078] scsi host2: ahci
[ 1.424092] scsi host3: ahci
[ 1.432113] scsi host4: ahci
[ 1.436095] scsi host5: ahci
[ 1.436234] ata3: SATA max UDMA/133 abar m1024@0xee444400 port 0xee444500 irq 28
[ 1.436235] ata4: DUMMY
[ 1.436237] ata5: DUMMY
[ 1.436238] ata6: DUMMY
[ 1.436465] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 1.437043] ata2: port disabled--ignoring
[ 1.457495] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95751m) rev 4201] (PCI Express) MAC address 00:16:d3:b7:51:32
[ 1.457500] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[ 1.457503] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 1.457505] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 1.459266] tg3 0000:02:00.0 ens2: renamed from eth0
[ 1.574889] ata1.00: ATAPI: MATSHITADVD-RAM UJ-850, RB11, max UDMA/33
[ 1.579846] ata1.00: configured for UDMA/33
[ 1.582385] scsi 0:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-850 RB11 PQ: 0 ANSI: 5
[ 1.667358] random: fast init done
[ 1.759236] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.759653] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.759657] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.860029] usb 2-1: new low-speed USB device number 2 using uhci_hcd
[ 2.048116] usb 2-1: New USB device found, idVendor=046d, idProduct=c03e
[ 2.048119] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.048121] usb 2-1: Product: USB-PS/2 Optical Mouse
[ 2.048123] usb 2-1: Manufacturer: Logitech
[ 2.053221] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.068243] usbcore: registered new interface driver usbhid
[ 2.068245] usbhid: USB HID core driver
[ 2.070153] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/0003:046D:C03E.0001/input/input3
[ 2.070303] hid-generic 0003:046D:C03E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1/input0
[ 2.184521] psmouse serio1: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 2.199787] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input2
[ 2.648030] usb 2-2: new low-speed USB device number 3 using uhci_hcd
[ 2.839115] usb 2-2: New USB device found, idVendor=046d, idProduct=c312
[ 2.839117] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.839120] usb 2-2: Product: USB Multimedia Keyboard
[ 2.839122] usb 2-2: Manufacturer: BTC
[ 2.859181] input: BTC USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/0003:046D:C312.0002/input/input4
[ 2.916441] hid-generic 0003:046D:C312.0002: input,hidraw1: USB HID v1.10 Keyboard [BTC USB Multimedia Keyboard] on usb-0000:00:1d.0-2/input0
[ 2.959297] input: BTC USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.1/0003:046D:C312.0003/input/input5
[ 3.016513] hid-generic 0003:046D:C312.0003: input,hiddev0,hidraw2: USB HID v1.10 Device [BTC USB Multimedia Keyboard] on usb-0000:00:1d.0-2/input1
[ 3.408029] usb 5-1: new full-speed USB device number 2 using uhci_hcd
[ 3.590078] usb 5-1: New USB device found, idVendor=0a5c, idProduct=2110
[ 3.590081] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.590083] usb 5-1: Product: BCM2045B
[ 3.590085] usb 5-1: Manufacturer: Broadcom Corp
[ 4.572072] floppy0: no floppy controllers found
[ 6.876044] ata3.00: qc timeout (cmd 0x47)
[ 6.876056] ata3.00: READ LOG DMA EXT failed, trying unqueued
[ 6.876059] ata3.00: failed to get Log Directory Emask 0x40
[ 6.876061] ata3.00: ATA-10: SPCC Solid State Disk, V2.8, max UDMA/133
[ 6.876065] ata3.00: 234441648 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 6.876068] ata3.00: failed to get Identify Device Data, Emask 0x40
[ 6.876078] ata3.00: failed to set xfermode (err_mask=0x40)
[ 7.190575] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 7.190898] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 7.190902] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 7.191129] ata3.00: NCQ Send/Recv Log not supported
[ 7.191606] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 7.191610] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 7.191842] ata3.00: NCQ Send/Recv Log not supported
[ 7.192015] ata3.00: configured for UDMA/133
[ 7.192256] scsi 2:0:0:0: Direct-Access ATA SPCC Solid State V2.8 PQ: 0 ANSI: 5
[ 7.234917] sr 0:0:0:0: [sr0] scsi3-mmc drive: 19x/62x writer dvd-ram cd/rw xa/form2 cdda tray
[ 7.234921] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 7.235195] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 7.235391] sd 2:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[ 7.235510] sd 2:0:0:0: [sda] Write Protect is off
[ 7.235514] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 7.235550] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 7.237002] sda: sda1 sda2 sda3 < sda5 sda6 >
[ 7.237810] sd 2:0:0:0: [sda] Attached SCSI disk
[ 7.324325] PM: Starting manual resume from disk
[ 7.324331] PM: Hibernation image partition 8:6 present
[ 7.324332] PM: Looking for hibernation image.
[ 7.324632] PM: Image not found (code -22)
[ 7.324633] PM: Hibernation image not present or could not be loaded.
[ 7.478667] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 7.656135] systemd[1]: RTC configured in localtime, applying delta of 120 minutes to system time.
[ 7.688396] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 7.697949] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 7.698146] systemd[1]: Detected architecture x86.
[ 7.698570] systemd[1]: Set hostname to <CinkPadR60e>.
[ 7.822726] systemd[1]: Reached target Remote File Systems.
[ 7.822910] systemd[1]: Listening on udev Control Socket.
[ 7.823055] systemd[1]: Listening on Journal Audit Socket.
[ 7.823304] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 7.823371] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 7.823452] systemd[1]: Listening on Journal Socket (/dev/log).
[ 7.823542] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 7.864775] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[ 8.132092] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input6
[ 8.132105] ACPI: Lid Switch [LID]
[ 8.132213] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input7
[ 8.132217] ACPI: Sleep Button [SLPB]
[ 8.132333] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input8
[ 8.132336] ACPI: Power Button [PWRF]
[ 8.141389] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 8.144232] acpi device:02: registered as cooling_device2
[ 8.144379] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9
[ 8.169650] ACPI: AC Adapter [AC] (on-line)
[ 8.200644] ACPI: Battery Slot [BAT0] (battery present)
[ 8.212115] Non-volatile memory driver v1.3
[ 8.218373] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 8.233372] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[ 8.233376] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 8.233377] thinkpad_acpi: ThinkPad BIOS 7EETD0WW (2.20 ), EC 7EHT15WW-1.07
[ 8.233378] thinkpad_acpi: Lenovo ThinkPad R60e, model 0657KFG
[ 8.241474] thinkpad_acpi: radio switch found; radios are enabled
[ 8.241509] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 8.241510] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 8.242677] [drm] Initialized
[ 8.249892] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[ 8.263532] intel_rng: FWH not detected
[ 8.274526] snd_hda_intel 0000:00:1b.0: probe_mask set to 0x1 for device 17aa:2010
[ 8.277526] systemd-journald[202]: Received request to flush runtime journal from PID 1
[ 8.279070] pci 0000:00:1e.0: enabling device (0005 -> 0007)
[ 8.279186] yenta_cardbus 0000:15:00.0: CardBus bridge found [17aa:2012]
[ 8.279211] yenta_cardbus 0000:15:00.0: Using INTVAL to route CSC interrupts to PCI
[ 8.279214] yenta_cardbus 0000:15:00.0: Routing CardBus interrupts to PCI
[ 8.279220] yenta_cardbus 0000:15:00.0: TI: mfunc 0x01d01002, devctl 0x64
[ 8.287029] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 8.288078] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 8.291537] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input10
[ 8.300186] snd_hda_codec_analog hdaudioC0D0: autoconfig for AD1981: line_outs=1 (0x5/0x0/0x0/0x0/0x0) type:speaker
[ 8.300191] snd_hda_codec_analog hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 8.300194] snd_hda_codec_analog hdaudioC0D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 8.300196] snd_hda_codec_analog hdaudioC0D0: mono: mono_out=0x0
[ 8.300198] snd_hda_codec_analog hdaudioC0D0: inputs:
[ 8.300201] snd_hda_codec_analog hdaudioC0D0: Mic=0x8
[ 8.300204] snd_hda_codec_analog hdaudioC0D0: CD=0x19
[ 8.301577] ACPI Warning: SystemIO range 0x0000000000001028-0x000000000000102F conflicts with OpRegion 0x0000000000001000-0x000000000000107F (\_SB.PCI0.LPC.PMIO) (20160831/utaddress-247)
[ 8.301588] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 8.301591] ACPI Warning: SystemIO range 0x00000000000011B0-0x00000000000011BF conflicts with OpRegion 0x0000000000001180-0x00000000000011BF (\_SB.PCI0.LPC.LPIO) (20160831/utaddress-247)
[ 8.301597] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 8.301599] ACPI Warning: SystemIO range 0x0000000000001180-0x00000000000011AF conflicts with OpRegion 0x0000000000001180-0x00000000000011BF (\_SB.PCI0.LPC.LPIO) (20160831/utaddress-247)
[ 8.301605] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 8.301606] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 8.317272] leds_ss4200: no LED devices found
[ 8.345590] Bluetooth: Core ver 2.22
[ 8.345612] NET: Registered protocol family 31
[ 8.345614] Bluetooth: HCI device and connection manager initialized
[ 8.345619] Bluetooth: HCI socket layer initialized
[ 8.345623] Bluetooth: L2CAP socket layer initialized
[ 8.345632] Bluetooth: SCO socket layer initialized
[ 8.362052] usbcore: registered new interface driver btusb
[ 8.368374] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 8.395860] pci 0000:00:00.0: Intel 945GM Chipset
[ 8.395892] pci 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[ 8.396466] pci 0000:00:00.0: detected 8192K stolen memory
[ 8.409357] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s
[ 8.409360] iwl3945: Copyright(c) 2003-2011 Intel Corporation
[ 8.409437] iwl3945 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 8.415535] [drm] Memory usable by graphics device = 256M
[ 8.415540] [drm] Replacing VGA console driver
[ 8.421638] Console: switching to colour dummy device 80x25
[ 8.464612] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 8.464615] [drm] Driver supports precise vblank timestamp query.
[ 8.465142] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 8.484114] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 8.484218] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 8.497788] iwl3945 0000:03:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
[ 8.497793] iwl3945 0000:03:00.0: Detected Intel Wireless WiFi Link 3945ABG
[ 8.499032] input: PC Speaker as /devices/platform/pcspkr/input/input12
[ 8.514100] [drm] RC6 disabled, disabling runtime PM support
[ 8.514137] [drm] initialized overlay support
[ 8.520738] yenta_cardbus 0000:15:00.0: ISA IRQ mask 0x0cb8, PCI irq 16
[ 8.520744] yenta_cardbus 0000:15:00.0: Socket status: 30000007
[ 8.520751] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [io 0x8000-0xbfff]
[ 8.520755] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x8000-0xbfff:
[ 8.522543] excluding 0x8000-0x80ff 0x8400-0x84ff
[ 8.525960] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0
[ 8.540477] intel_powerclamp: No package C-state available
[ 8.558424] ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs'
[ 8.628754] fbcon: inteldrmfb (fb0) is primary device
[ 8.671928] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xe4300000-0xe7ffffff]
[ 8.671932] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe4300000-0xe7ffffff:
[ 8.671948] excluding 0xe4300000-0xe46cffff
[ 8.671950] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xe0000000-0xe3ffffff 64bit pref]
[ 8.671953] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe0000000-0xe3ffffff:
[ 8.671964] excluding 0xe0000000-0xe3ffffff
[ 8.689613] iTCO_vendor_support: vendor-support=0
[ 8.696276] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 8.696337] iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x1060)
[ 8.700150] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 8.845928] Adding 3134460k swap on /dev/sda6. Priority:-1 extents:1 across:3134460k SSFS
[ 8.922464] iwl3945 0000:03:00.0 wls3: renamed from wlan0
[ 8.959198] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af:
[ 8.962059] excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x377
[ 8.962118] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff:
[ 8.963036] excluding 0x3f0-0x3f7 0x4d0-0x4d7
[ 8.963066] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff:
[ 8.967010] clean
[ 8.967056] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7:
[ 8.968804] clean
[ 8.968844] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
[ 8.968865] excluding 0xc0000-0xd3fff 0xdc000-0xfffff
[ 8.968900] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
[ 8.968917] excluding 0xa0000000-0xa0ffffff
[ 8.968952] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
[ 8.968969] excluding 0x60000000-0x60ffffff
[ 8.968992] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff:
[ 8.969967] clean
[ 9.093443] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 9.093444] Bluetooth: BNEP filters: protocol multicast
[ 9.093451] Bluetooth: BNEP socket layer initialized
[ 9.325864] Console: switching to colour frame buffer device 128x48
[ 9.350386] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 9.556677] IPv6: ADDRCONF(NETDEV_UP): ens2: link is not ready
[ 9.734182] IPv6: ADDRCONF(NETDEV_UP): ens2: link is not ready
[ 9.742029] IPv6: ADDRCONF(NETDEV_UP): wls3: link is not ready
[ 9.744911] iwl3945 0000:03:00.0: firmware: direct-loading firmware iwlwifi-3945-2.ucode
[ 9.744923] iwl3945 0000:03:00.0: loaded firmware version 15.32.2.9
[ 9.824061] IPv6: ADDRCONF(NETDEV_UP): wls3: link is not ready
[ 9.902717] IPv6: ADDRCONF(NETDEV_UP): wls3: link is not ready
[ 10.049197] IPv6: ADDRCONF(NETDEV_UP): wls3: link is not ready
[ 11.484061] floppy0: no floppy controllers found
[ 13.502865] IPv6: ADDRCONF(NETDEV_UP): wls3: link is not ready
[ 13.572799] wls3: authenticate with c4:9a:02:16:51:46
[ 13.575014] wls3: send auth to c4:9a:02:16:51:46 (try 1/3)
[ 13.576839] wls3: authenticated
[ 13.580126] wls3: associate with c4:9a:02:16:51:46 (try 1/3)
[ 13.583036] wls3: RX AssocResp from c4:9a:02:16:51:46 (capab=0x411 status=0 aid=1)
[ 13.583122] wls3: AP has invalid WMM params (AIFSN=1 for ACI 2), will use 2
[ 13.583124] wls3: AP has invalid WMM params (AIFSN=1 for ACI 3), will use 2
[ 13.584235] wls3: associated
[ 13.584284] IPv6: ADDRCONF(NETDEV_CHANGE): wls3: link becomes ready
[ 24.807142] random: crng init doneTak, gdm3 nie ma:
Kod:
michalc@CinkPadR60e:~$ systemctl status gdm3 Unit gdm3.service could not be found.
Offline
#20 2017-06-30 20:58:40
wikingagressor - Użytkownik
- wikingagressor
- Użytkownik
- Skąd: Józefów k.Błonia, mazowieck
- Zarejestrowany: 2015-02-03
Re: Debian 9 i686 - brak ekranu logowania
Wedlug mnie problem moze lezec tutaj:
Kod:
[9.713] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
Trzeba sprawdzic czy istnieje pakiet sydemd-logind i jesli go nie ma doinstalowac. Jesli jest to moze rekonfiguracja wystarczy
Peace, Love and Debian for the World!!!
Offline
#21 2017-06-30 21:36:35
michalc1976 - Użytkownik
- michalc1976
- Użytkownik
- Zarejestrowany: 2017-06-28
Re: Debian 9 i686 - brak ekranu logowania
wikingagressor napisał(-a):
Wedlug mnie problem moze lezec tutaj:
Kod:
[9.713] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integrationTrzeba sprawdzic czy istnieje pakiet sydemd-logind i jesli go nie ma doinstalowac. Jesli jest to moze rekonfiguracja wystarczy
Wydaje mi się że pakiet jest:
Kod:
root@CinkPadR60e:~# systemctl status systemd-logind.service
● systemd-logind.service - Login Service
Loaded: loaded (/lib/systemd/system/systemd-logind.service; static; vendor preset: enabled)
Active: active (running) since Fri 2017-06-30 21:24:08 CEST; 4min 16s ago
Docs: man:systemd-logind.service(8)
man:logind.conf(5)
http://www.freedesktop.org/wiki/Software/systemd/logind
http://www.freedesktop.org/wiki/Software/systemd/multiseat
Main PID: 369 (systemd-logind)
Status: "Processing requests..."
Tasks: 1 (limit: 4915)
CGroup: /system.slice/systemd-logind.service
└─369 /lib/systemd/systemd-logind
Jun 30 21:24:08 CinkPadR60e systemd-logind[369]: Watching system buttons on /dev/input/event5 (Lid Switch)
Jun 30 21:24:08 CinkPadR60e systemd-logind[369]: Watching system buttons on /dev/input/event6 (Sleep Button)
Jun 30 21:24:08 CinkPadR60e systemd-logind[369]: Watching system buttons on /dev/input/event9 (ThinkPad Extra Buttons)
Jun 30 21:24:08 CinkPadR60e systemd-logind[369]: New seat seat0.
Jun 30 21:24:08 CinkPadR60e systemd-logind[369]: Watching system buttons on /dev/input/event8 (Video Bus)
Jun 30 21:24:08 CinkPadR60e systemd-logind[369]: Watching system buttons on /dev/input/event7 (Power Button)
Jun 30 21:24:08 CinkPadR60e systemd-logind[369]: Watching system buttons on /dev/input/event6 (Sleep Button)
Jun 30 21:24:08 CinkPadR60e systemd-logind[369]: Watching system buttons on /dev/input/event9 (ThinkPad Extra Buttons)
Jun 30 21:24:09 CinkPadR60e systemd-logind[369]: New session c1 of user lightdm.
Jun 30 21:24:20 CinkPadR60e systemd-logind[369]: New session 2 of user michalc.W jaki sposób mogę dokonać jego rekonfiguracji?
Offline
#22 2017-07-01 23:16:56
jawojx - Użytkownik
- jawojx
- Użytkownik
- Zarejestrowany: 2012-10-11
Re: Debian 9 i686 - brak ekranu logowania
Spróbuj przeinstalować te pakiety:
Kod:
# apt-get install --reinstall systemd xserver-xorg-video-all lightdm
Restartuj lightdm
Kod:
# systemctl restart lightdm.service
Jak dalej nic to sprawdź tak:
Kod:
# lightdm --test-mode --debug
Pokaż:
Kod:
# cat /var/log/lightdm/x-0.log # cat /var/log/lightdm/lightdm.log
Offline
#23 2017-07-02 09:04:51
michalc1976 - Użytkownik
- michalc1976
- Użytkownik
- Zarejestrowany: 2017-06-28
Re: Debian 9 i686 - brak ekranu logowania
jawojx napisał(-a):
Spróbuj przeinstalować te pakiety:
Kod:
# apt-get install --reinstall systemd xserver-xorg-video-all lightdmRestartuj lightdm
Kod:
# systemctl restart lightdm.service
Powyższe dwa polecenia nic nie zmieniły.
Jak dalej nic to sprawdź tak:
Kod:
# lightdm --test-mode --debug
Po tym poleceniu na konsoli pojawiło się coś takiego:
Kod:
root@CinkPadR60e:~# lightdm --test-mode --debug [+0.00s] DEBUG: Logging to /var/log/lightdm/lightdm.log [+0.00s] DEBUG: Starting Light Display Manager 1.18.3, UID=0 PID=1264 [+0.00s] DEBUG: Loading configuration dirs from /usr/share/lightdm/lightdm.conf.d [+0.00s] DEBUG: Loading configuration from /usr/share/lightdm/lightdm.conf.d/01_debian.conf [+0.00s] DEBUG: Loading configuration dirs from /usr/local/share/lightdm/lightdm.conf.d [+0.00s] DEBUG: Loading configuration dirs from /etc/xdg/lightdm/lightdm.conf.d [+0.00s] DEBUG: Loading configuration from /etc/lightdm/lightdm.conf [+0.00s] DEBUG: Using D-Bus name org.freedesktop.DisplayManager [+0.00s] DEBUG: Using Xephyr for X servers [+0.00s] DEBUG: Registered seat module xlocal [+0.00s] DEBUG: Registered seat module xremote [+0.00s] DEBUG: Registered seat module unity [+0.02s] DEBUG: Monitoring logind for seats [+0.02s] DEBUG: New seat added from logind: seat0 [+0.02s] DEBUG: Seat seat0: Loading properties from config section Seat:* [+0.02s] DEBUG: Seat seat0: Starting [+0.02s] DEBUG: Seat seat0: Creating greeter session [+0.02s] DEBUG: Seat seat0: Creating display server of type x [+0.02s] DEBUG: Could not run plymouth --ping: Failed to execute child process "plymouth" (No such file or directory) [+0.02s] DEBUG: Using VT 7 [+0.02s] DEBUG: Seat seat0: Starting local X display on VT 7 [+0.02s] DEBUG: DisplayServer x-2: Logging to /var/log/lightdm/x-2.log [+0.02s] DEBUG: DisplayServer x-2: Can't launch X server Xephyr, not found in path [+0.02s] DEBUG: DisplayServer x-2: X server stopped [+0.02s] DEBUG: Releasing VT 7 [+0.02s] DEBUG: Seat seat0: Display server stopped [+0.02s] DEBUG: Seat seat0: Can't create display server for greeter [+0.02s] DEBUG: Seat seat0: Session stopped [+0.02s] DEBUG: Seat seat0: Stopping display server, no sessions require it [+0.02s] DEBUG: Seat seat0: Stopping [+0.02s] DEBUG: Seat seat0: Stopped [+0.02s] DEBUG: Failed to start seat: seat0
Pokaż:
Kod:
# cat /var/log/lightdm/x-0.log
Kod:
X.Org X Server 1.19.2
Release Date: 2017-03-02
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.16.0-4-amd64 i686 Debian
Current Operating System: Linux CinkPadR60e 4.9.0-3-686-pae #1 SMP Debian 4.9.30-2+deb9u2 (2017-06-26) i686
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-3-686-pae root=UUID=ba5288c5-ae4e-4051-ba7c-51136c8d7fd1 ro quiet
Build Date: 03 March 2017 03:15:35PM
xorg-server 2:1.19.2-1 (https://www.debian.org/support)
Current version of pixman: 0.34.0
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Jul 2 08:43:00 2017
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(II) AIGLX: Suspending AIGLX clients for VT switchKod:
# cat /var/log/lightdm/lightdm.log
Kod:
[+0.00s] DEBUG: Logging to /var/log/lightdm/lightdm.log [+0.00s] DEBUG: Starting Light Display Manager 1.18.3, UID=0 PID=1264 [+0.00s] DEBUG: Loading configuration dirs from /usr/share/lightdm/lightdm.conf.d [+0.00s] DEBUG: Loading configuration from /usr/share/lightdm/lightdm.conf.d/01_debian.conf [+0.00s] DEBUG: Loading configuration dirs from /usr/local/share/lightdm/lightdm.conf.d [+0.00s] DEBUG: Loading configuration dirs from /etc/xdg/lightdm/lightdm.conf.d [+0.00s] DEBUG: Loading configuration from /etc/lightdm/lightdm.conf [+0.00s] DEBUG: Using D-Bus name org.freedesktop.DisplayManager [+0.00s] DEBUG: Using Xephyr for X servers [+0.00s] DEBUG: Registered seat module xlocal [+0.00s] DEBUG: Registered seat module xremote [+0.00s] DEBUG: Registered seat module unity [+0.02s] DEBUG: Monitoring logind for seats [+0.02s] DEBUG: New seat added from logind: seat0 [+0.02s] DEBUG: Seat seat0: Loading properties from config section Seat:* [+0.02s] DEBUG: Seat seat0: Starting [+0.02s] DEBUG: Seat seat0: Creating greeter session [+0.02s] DEBUG: Seat seat0: Creating display server of type x [+0.02s] DEBUG: Could not run plymouth --ping: Failed to execute child process "plymouth" (No such file or directory) [+0.02s] DEBUG: Using VT 7 [+0.02s] DEBUG: Seat seat0: Starting local X display on VT 7 [+0.02s] DEBUG: DisplayServer x-2: Logging to /var/log/lightdm/x-2.log [+0.02s] DEBUG: DisplayServer x-2: Can't launch X server Xephyr, not found in path [+0.02s] DEBUG: DisplayServer x-2: X server stopped [+0.02s] DEBUG: Releasing VT 7 [+0.02s] DEBUG: Seat seat0: Display server stopped [+0.02s] DEBUG: Seat seat0: Can't create display server for greeter [+0.02s] DEBUG: Seat seat0: Session stopped [+0.02s] DEBUG: Seat seat0: Stopping display server, no sessions require it [+0.02s] DEBUG: Seat seat0: Stopping [+0.02s] DEBUG: Seat seat0: Stopped [+0.02s] DEBUG: Failed to start seat: seat0
Offline
#24 2017-07-02 09:27:47
yossarian - Szczawiożerca
- yossarian
- Szczawiożerca
- Skąd: Shangri-La
- Zarejestrowany: 2011-04-25
Re: Debian 9 i686 - brak ekranu logowania
Kod:
[+0.02s] DEBUG: DisplayServer x-2: Can't launch X server Xephyr, not found in path [+0.02s] DEBUG: DisplayServer x-2: X server stopped
Lightdm próbuje odpalić Xephyr zamiast standardowego Xorga.
Dziwnie to wygląda. W jaki dokładnie sposób instalowałeś i konfigurowałeś system?
Masz /usr/bin/X i /usr/bin/Xorg?
Można by było ustawić za pomocą opcji:
# xserver-command = X server command to run (can also contain arguments e.g. X -special-option)
Pokaż co masz w /etc/lightdm/lightdm.conf
Offline
#25 2017-07-02 09:33:09
Jacekalex - Podobno człowiek...;)
- Jacekalex
- Podobno człowiek...;)
- Skąd: /dev/random
- Zarejestrowany: 2008-01-07
Re: Debian 9 i686 - brak ekranu logowania
Jeżeli tam jest karta Intela i bryka na sterowniku Intela, to czy nie prościej i lepiej byłoby odpalić Waylanda zamiast Xorga?
Nawet na Weston + Xwayland można każde środowisko używać,chociaż jeszcze nie wyczaiłem, jak odpalić Westona bez tego górnego paska z zegarkiem.
W rezultacie w starym Mate miałem 2 zegarki... xD
Zarówno Mutter z Gnome-3 jak Plasma już na Waylandzie brykają nie od wczoraj.
RTFM:
https://wiki.debian.org/Wayland
Ostatnio edytowany przez Jacekalex (2017-07-02 09:37:36)
W demokracji każdy naród ma taką władzę, na jaką zasługuje ;)
Si vis pacem para bellum ;) | Pozdrawiam :)
Offline
- Forum Debian Users Gang
- » Instalacja i podstawowa konfiguracja
- » Debian 9 i686 - brak ekranu logowania