Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!

Ogłoszenie

Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.

#1  2017-06-18 22:40:56

  Dami24 - Użytkownik

Dami24
Użytkownik
Zarejestrowany: 2017-06-18

phoenix usb

Witam , zainstalowałem sobie najnowszą wersję 9 i mam 2 czytniki phoenix usb podpięte. Odpalam program oscam i czyta tylko jeden czytnik na /dev/ttyUSB0 a /dev/ttyUSB1 jest nie czytany wywala mi w logach error. Gdzie mam szukać przyczyny ?

Komunikat dostaję taki :

(reader) cp [mouse] ERROR: Opening device /dev/ttyUSB1 (errno=2 No such file or directory)
2017/06/18 22:43:56 08CE99A3 r   (reader) cp [mouse] Cannot open device: /dev/ttyUSB1
2017/06/18 22:43:58 08CE99A3 r   (reader) cp [mouse] ERROR: Opening device /dev/ttyUSB1 (errno=2 No such file or directory)
2017/06/18 22:43:58 08CE99A3 r   (reader) cp [mouse] Cannot open device: /dev/ttyUSB1


lsusb: Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 002: ID 413c:2003 Dell Computer Corp. Keyboard
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 002: ID e0ff:0002
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC
Bus 001 Device 002: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC

Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub


Jak widać oba czytniki wykrywa.

Ostatnio edytowany przez Dami24 (2017-06-18 23:53:01)

Offline

 

#2  2017-06-19 07:07:14

  arecki - Użytkownik

arecki
Użytkownik
Skąd: 44 Bronson Lane Hensonville
Zarejestrowany: 2016-03-03

Re: phoenix usb

Wykrywać wykrywa, ale czy na pewno montuje pod  /dev/ttyUSB1 ?
Zobacz w dmesg pod co podpina system drugi czytnik.
Na Jessie działało?

Ostatnio edytowany przez arecki (2017-06-19 07:08:17)

Offline

 

#3  2017-06-19 11:27:43

  Dami24 - Użytkownik

Dami24
Użytkownik
Zarejestrowany: 2017-06-18

Re: phoenix usb

Wynik dmesg :

root@debian:~#  dmesg
[    0.000000] Linux version 4.9.0-3-686-pae (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18) ) #1 SMP Debian 4.9.30-2 (2017-06-12)
[    0.000000] Disabled fast string operations
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007bc9ffff] usable
[    0.000000] BIOS-e820: [mem 0x000000007bca0000-0x000000007bcadfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007bcae000-0x000000007bccffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007bcd0000-0x000000007bcdffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007bced000-0x000000007bdfffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: Hewlett-Packard HP t5740e Thin Client/3641h, BIOS 786R8 v1.04 03/22/2011
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x7bca0 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-D3FFF write-protect
[    0.000000]   D4000-DFFFF uncachable
[    0.000000]   E0000-E7FFF write-through
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask 080000000 write-back
[    0.000000]   1 base 07BD00000 mask 0FFF00000 uncachable
[    0.000000]   2 base 07BE00000 mask 0FFE00000 uncachable
[    0.000000]   3 base 07C000000 mask 0FC000000 uncachable
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT
[    0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [c00ff780]
[    0.000000] initial memory mapped: [mem 0x00000000-0x0ddfffff]
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] BRK [0x0d9a5000, 0x0d9a5fff] PGTABLE
[    0.000000] BRK [0x0d9a6000, 0x0d9a7fff] PGTABLE
[    0.000000] BRK [0x0d9a8000, 0x0d9a8fff] PGTABLE
[    0.000000] BRK [0x0d9a9000, 0x0d9a9fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x35ec3000-0x36f58fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FA5E0 000014 (v00 ACPIAM)
[    0.000000] ACPI: RSDT 0x000000007BCA0000 00003C (v01 032211 RSDT1151 20110322 MSFT 00000097)
[    0.000000] ACPI: FACP 0x000000007BCA0200 000084 (v01 032211 FACP1151 20110322 MSFT 00000097)
[    0.000000] ACPI: DSDT 0x000000007BCA0430 006244 (v01 40HV0  40HV0104 00000104 INTL 20051117)
[    0.000000] ACPI: FACS 0x000000007BCAE000 000040
[    0.000000] ACPI: APIC 0x000000007BCA0390 00005C (v01 032211 APIC1151 20110322 MSFT 00000097)
[    0.000000] ACPI: MCFG 0x000000007BCA03F0 00003C (v01 032211 OEMMCFG  20110322 MSFT 00000097)
[    0.000000] ACPI: OEMB 0x000000007BCAE040 000072 (v01 032211 OEMB1151 20110322 MSFT 00000097)
[    0.000000] ACPI: GSCI 0x000000007BCAE0C0 002024 (v01 032211 GMCHSCI  20110322 MSFT 00000097)
[    0.000000] ACPI: SSDT 0x000000007BCB09F0 0004F0 (v01 PmRef  CpuPm    00003000 INTL 20051117)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 1090MB HIGHMEM available.
[    0.000000] 889MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 379fe000
[    0.000000]   low ram: 0 - 379fe000
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   Normal   [mem 0x0000000001000000-0x00000000379fdfff]
[    0.000000]   HighMem  [mem 0x00000000379fe000-0x000000007bc9ffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000007bc9ffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007bc9ffff]
[    0.000000] On node 0 totalpages: 506942
[    0.000000] free_area_init_node: node 0, pgdat cd7e4940, node_mem_map f4d53024
[    0.000000]   DMA zone: 36 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   Normal zone: 1967 pages used for memmap
[    0.000000]   Normal zone: 223742 pages, LIFO batch:31
[    0.000000]   HighMem zone: 279202 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] Reserving Intel graphics memory at 0x000000007c000000-0x000000007fffffff
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
[    0.000000] e820: [mem 0x80000000-0xfedfffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] percpu: Embedded 20 pages/cpu @f79d3000 s50700 r0 d31220 u81920
[    0.000000] pcpu-alloc: s50700 r0 d31220 u81920 alloc=20*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 504939
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-3-686-pae root=UUID=a9bbc64c-0157-4c2c-8ec7-e2386d1b0f9f ro quiet
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (000379fe:0007bca0)
[    0.000000] Initializing Movable for node 0 (00000000:00000000)
[    0.000000] Memory: 1982000K/2027768K available (5819K kernel code, 646K rwdata, 1716K rodata, 752K init, 456K bss, 45768K reserved, 0K cma-reserved, 1116808K highmem)
[    0.000000] virtual kernel memory layout:
                   fixmap  : 0xffd36000 - 0xfffff000   (2852 kB)
                   pkmap   : 0xffa00000 - 0xffc00000   (2048 kB)
                   vmalloc : 0xf81fe000 - 0xff9fe000   ( 120 MB)
                   lowmem  : 0xc0000000 - 0xf79fe000   ( 889 MB)
                     .init : 0xcd801000 - 0xcd8bd000   ( 752 kB)
                     .data : 0xcd5aefb2 - 0xcd7ff9c0   (2370 kB)
                     .text : 0xcd000000 - 0xcd5aefb2   (5819 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 32.
[    0.000000]  RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
[    0.000000] NR_IRQS:2304 nr_irqs:440 16
[    0.000000] CPU 0 irqstacks, hard=f742e000 soft=f7430000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1662.451 MHz processor
[    0.004017] Calibrating delay loop (skipped), value calculated using timer frequency.. 3324.90 BogoMIPS (lpj=6649804)
[    0.004024] pid_max: default: 32768 minimum: 301
[    0.004092] ACPI: Core revision 20160831
[    0.020261] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.020359] Security Framework initialized
[    0.020362] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.020376] AppArmor: AppArmor disabled by boot time parameter
[    0.020419] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.020424] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.021056] Disabled fast string operations
[    0.021063] CPU: Physical Processor ID: 0
[    0.021065] CPU: Processor Core ID: 0
[    0.021072] mce: CPU supports 5 MCE banks
[    0.021086] CPU0: Thermal monitoring enabled (TM2)
[    0.021093] process: using mwait in idle threads
[    0.021104] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 0
[    0.021107] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8, 1GB 0
[    0.021425] Freeing SMP alternatives memory: 24K (cd8bd000 - cd8c3000)
[    0.028023] ftrace: allocating 24024 entries in 47 pages
[    0.044180] smpboot: Max logical packages: 2
[    0.044190] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.044594] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.088000] smpboot: CPU0: Intel(R) Atom(TM) CPU N280   @ 1.66GHz (family: 0x6, model: 0x1c, stepping: 0x2)
[    0.088000] Performance Events: PEBS fmt0+, LBR disabled due to erratumAtom events, Intel PMU driver.
[    0.088000] ... version:                3
[    0.088000] ... bit width:              40
[    0.088000] ... generic registers:      2
[    0.088000] ... value mask:             000000ffffffffff
[    0.088000] ... max period:             000000007fffffff
[    0.088000] ... fixed-purpose events:   3
[    0.088000] ... event mask:             0000000700000003
[    0.088000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.088000] CPU 1 irqstacks, hard=f757e000 soft=f7580000
[    0.088000] x86: Booting SMP configuration:
[    0.088000] .... node  #0, CPUs:      #1
[    0.008000] Initializing CPU#1
[    0.008000] Disabled fast string operations
[    0.166057] x86: Booted up 1 node, 2 CPUs
[    0.166057] smpboot: Total of 2 processors activated (6650.12 BogoMIPS)
[    0.166057] devtmpfs: initialized
[    0.166057] PM: Registering ACPI NVS region [mem 0x7bcae000-0x7bccffff] (139264 bytes)
[    0.168013] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.168013] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.168013] pinctrl core: initialized pinctrl subsystem
[    0.168013] NET: Registered protocol family 16
[    0.176017] cpuidle: using governor ladder
[    0.188015] cpuidle: using governor menu
[    0.188106] ACPI: bus type PCI registered
[    0.188111] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.188297] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.188301] PCI: not using MMCONFIG
[    0.188304] PCI: Using configuration type 1 for base access
[    0.200122] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.200224] ACPI: Added _OSI(Module Device)
[    0.200228] ACPI: Added _OSI(Processor Device)
[    0.200230] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.200233] ACPI: Added _OSI(Processor Aggregator Device)
[    0.212236] ACPI: Dynamic OEM Table Load:
[    0.212251] ACPI: SSDT 0x00000000F75FF000 0001FA (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)
[    0.212794] ACPI: Dynamic OEM Table Load:
[    0.212809] ACPI: SSDT 0x00000000F7567800 000594 (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
[    0.213913] ACPI: Dynamic OEM Table Load:
[    0.213924] ACPI: SSDT 0x00000000F7565C00 0000CC (v01 PmRef  Cpu1Ist  00003000 INTL 20051117)
[    0.214291] ACPI: Dynamic OEM Table Load:
[    0.214302] ACPI: SSDT 0x00000000F74AD240 000085 (v01 PmRef  Cpu1Cst  00003000 INTL 20051117)
[    0.216063] ACPI: Interpreter enabled
[    0.216106] ACPI: (supports S0 S5)
[    0.216109] ACPI: Using IOAPIC for interrupt routing
[    0.216209] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.220184] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.220187] PCI: Using MMCONFIG for extended config space
[    0.220199] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.244394] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.244408] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.244422] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.245269] PCI host bridge to bus 0000:00
[    0.245276] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.245281] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.245286] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.245290] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
[    0.245295] pci_bus 0000:00: root bus resource [mem 0x7be00000-0xdfffffff window]
[    0.245299] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed8ffff window]
[    0.245304] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.245327] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000
[    0.245644] pci 0000:00:02.0: [8086:2a42] type 00 class 0x030000
[    0.245666] pci 0000:00:02.0: reg 0x10: [mem 0xfe400000-0xfe7fffff 64bit]
[    0.245678] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.245688] pci 0000:00:02.0: reg 0x20: [io  0xc080-0xc087]
[    0.246013] pci 0000:00:02.1: [8086:2a43] type 00 class 0x038000
[    0.246031] pci 0000:00:02.1: reg 0x10: [mem 0xfe900000-0xfe9fffff 64bit]
[    0.246373] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[    0.246426] pci 0000:00:1a.0: reg 0x20: [io  0xc800-0xc81f]
[    0.246677] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.246839] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[    0.246893] pci 0000:00:1a.1: reg 0x20: [io  0xc480-0xc49f]
[    0.247132] pci 0000:00:1a.1: System wakeup disabled by ACPI
[    0.247296] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
[    0.247349] pci 0000:00:1a.2: reg 0x20: [io  0xc400-0xc41f]
[    0.247588] pci 0000:00:1a.2: System wakeup disabled by ACPI
[    0.247763] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[    0.247789] pci 0000:00:1a.7: reg 0x10: [mem 0xfeaff400-0xfeaff7ff]
[    0.247897] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.248069] pci 0000:00:1a.7: System wakeup disabled by ACPI
[    0.248236] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[    0.248262] pci 0000:00:1b.0: reg 0x10: [mem 0xfeaf8000-0xfeafbfff 64bit]
[    0.248361] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.248657] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[    0.248752] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.248915] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.249079] pci 0000:00:1c.4: [8086:2948] type 01 class 0x060400
[    0.249172] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.249334] pci 0000:00:1c.4: System wakeup disabled by ACPI
[    0.249501] pci 0000:00:1c.5: [8086:294a] type 01 class 0x060400
[    0.249601] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.249763] pci 0000:00:1c.5: System wakeup disabled by ACPI
[    0.249929] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[    0.249983] pci 0000:00:1d.0: reg 0x20: [io  0xd000-0xd01f]
[    0.250235] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.250402] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[    0.250457] pci 0000:00:1d.1: reg 0x20: [io  0xcc00-0xcc1f]
[    0.250697] pci 0000:00:1d.1: System wakeup disabled by ACPI
[    0.250858] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[    0.250912] pci 0000:00:1d.2: reg 0x20: [io  0xc880-0xc89f]
[    0.251155] pci 0000:00:1d.2: System wakeup disabled by ACPI
[    0.251327] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[    0.251352] pci 0000:00:1d.7: reg 0x10: [mem 0xfeaff800-0xfeaffbff]
[    0.251460] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.251616] pci 0000:00:1d.7: System wakeup disabled by ACPI
[    0.251780] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.251991] pci 0000:00:1e.0: System wakeup disabled by ACPI
[    0.252176] pci 0000:00:1f.0: [8086:2919] type 00 class 0x060100
[    0.252573] pci 0000:00:1f.2: [8086:2928] type 00 class 0x01018f
[    0.252594] pci 0000:00:1f.2: reg 0x10: [io  0xec00-0xec07]
[    0.252606] pci 0000:00:1f.2: reg 0x14: [io  0xe880-0xe883]
[    0.252618] pci 0000:00:1f.2: reg 0x18: [io  0xe800-0xe807]
[    0.252629] pci 0000:00:1f.2: reg 0x1c: [io  0xe480-0xe483]
[    0.252641] pci 0000:00:1f.2: reg 0x20: [io  0xe400-0xe40f]
[    0.252652] pci 0000:00:1f.2: reg 0x24: [io  0xe080-0xe08f]
[    0.252978] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[    0.253001] pci 0000:00:1f.3: reg 0x10: [mem 0xfeaffc00-0xfeaffcff 64bit]
[    0.253028] pci 0000:00:1f.3: reg 0x20: [io  0x0400-0x041f]
[    0.253320] pci 0000:00:1f.5: [8086:292d] type 00 class 0x010185
[    0.253341] pci 0000:00:1f.5: reg 0x10: [io  0xdc00-0xdc07]
[    0.253353] pci 0000:00:1f.5: reg 0x14: [io  0xd880-0xd883]
[    0.253364] pci 0000:00:1f.5: reg 0x18: [io  0xd800-0xd807]
[    0.253376] pci 0000:00:1f.5: reg 0x1c: [io  0xd480-0xd483]
[    0.253387] pci 0000:00:1f.5: reg 0x20: [io  0xd400-0xd40f]
[    0.253399] pci 0000:00:1f.5: reg 0x24: [io  0xd080-0xd08f]
[    0.253828] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.253952] pci 0000:00:1c.4: PCI bridge to [bus 03]
[    0.254109] pci 0000:04:00.0: [14e4:1692] type 00 class 0x020000
[    0.254146] pci 0000:04:00.0: reg 0x10: [mem 0xfebf0000-0xfebfffff 64bit]
[    0.254317] pci 0000:04:00.0: PME# supported from D3hot D3cold
[    0.264040] pci 0000:00:1c.5: PCI bridge to [bus 04]
[    0.264050] pci 0000:00:1c.5:   bridge window [mem 0xfeb00000-0xfebfffff]
[    0.264209] pci 0000:00:1e.0: PCI bridge to [bus 01] (subtractive decode)
[    0.264223] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.264228] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.264233] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.264237] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
[    0.264242] pci 0000:00:1e.0:   bridge window [mem 0x7be00000-0xdfffffff window] (subtractive decode)
[    0.264246] pci 0000:00:1e.0:   bridge window [mem 0xf0000000-0xfed8ffff window] (subtractive decode)
[    0.264276] pci_bus 0000:00: on NUMA node 0
[    0.266800] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
[    0.266982] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[    0.267158] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 *12 14 15)
[    0.267338] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12 14 15)
[    0.267516] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[    0.267697] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 6 7 10 11 12 14 15)
[    0.267876] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 11 12 *14 15)
[    0.268073] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 10 11 12 14 *15)
[    0.268272] ACPI: Enabled 2 GPEs in block 00 to 3F
[    0.268667] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.268667] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.268667] vgaarb: loaded
[    0.268667] vgaarb: bridge control possible 0000:00:02.0
[    0.268667] PCI: Using ACPI for IRQ routing
[    0.276074] PCI: pci_cache_line_size set to 64 bytes
[    0.276157] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.276163] e820: reserve RAM buffer [mem 0x7bca0000-0x7bffffff]
[    0.276787] clocksource: Switched to clocksource refined-jiffies
[    0.299002] VFS: Disk quotas dquot_6.6.0
[    0.299055] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.299323] pnp: PnP ACPI init
[    0.299578] system 00:00: [mem 0xfed10000-0xfed19fff] has been reserved
[    0.299589] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.299794] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.300597] pnp 00:02: [dma 0 disabled]
[    0.300790] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.301857] system 00:03: [io  0x0a00-0x0a7f] has been reserved
[    0.301866] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.302388] system 00:04: [io  0x04d0-0x04d1] has been reserved
[    0.302394] system 00:04: [io  0x0800-0x087f] has been reserved
[    0.302406] system 00:04: [io  0x0500-0x053f] has been reserved
[    0.302413] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.302419] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.302424] system 00:04: [mem 0xfed40000-0xfed8ffff] has been reserved
[    0.302433] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.302775] system 00:05: [mem 0xffc00000-0xffefffff] has been reserved
[    0.302784] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.303162] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.303168] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.303177] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.303393] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
[    0.303402] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.304042] system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.304048] system 00:08: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.304053] system 00:08: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.304059] system 00:08: [mem 0x00100000-0x7bdfffff] could not be reserved
[    0.304064] system 00:08: [mem 0xfed90000-0xffffffff] could not be reserved
[    0.304073] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.304465] pnp: PnP ACPI: found 9 devices
[    0.304472] PnPBIOS: Disabled
[    0.346754] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.346788] clocksource: Switched to clocksource acpi_pm
[    0.346829] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
[    0.346837] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[    0.346844] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000
[    0.346856] pci 0000:00:1c.4: bridge window [io  0x1000-0x0fff] to [bus 03] add_size 1000
[    0.346862] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
[    0.346868] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000 add_align 100000
[    0.346881] pci 0000:00:1c.5: bridge window [io  0x1000-0x0fff] to [bus 04] add_size 1000
[    0.346888] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000
[    0.346915] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.346921] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.346926] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.346931] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.346937] pci 0000:00:1c.4: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.346942] pci 0000:00:1c.4: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.346947] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.346952] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.346958] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.346963] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.346968] pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.346973] pci 0000:00:1c.0: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.346978] pci 0000:00:1c.4: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.346983] pci 0000:00:1c.4: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.346988] pci 0000:00:1c.5: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.346993] pci 0000:00:1c.5: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.347007] pci 0000:00:1c.0: BAR 14: assigned [mem 0x7be00000-0x7bffffff]
[    0.347022] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80000000-0x801fffff 64bit pref]
[    0.347029] pci 0000:00:1c.4: BAR 14: assigned [mem 0x80200000-0x803fffff]
[    0.347042] pci 0000:00:1c.4: BAR 15: assigned [mem 0x80400000-0x805fffff 64bit pref]
[    0.347055] pci 0000:00:1c.5: BAR 15: assigned [mem 0x80600000-0x807fffff 64bit pref]
[    0.347064] pci 0000:00:1c.0: BAR 13: assigned [io  0x1000-0x1fff]
[    0.347071] pci 0000:00:1c.4: BAR 13: assigned [io  0x2000-0x2fff]
[    0.347078] pci 0000:00:1c.5: BAR 13: assigned [io  0x3000-0x3fff]
[    0.347088] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.347094] pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
[    0.347102] pci 0000:00:1c.0:   bridge window [mem 0x7be00000-0x7bffffff]
[    0.347109] pci 0000:00:1c.0:   bridge window [mem 0x80000000-0x801fffff 64bit pref]
[    0.347117] pci 0000:00:1c.4: PCI bridge to [bus 03]
[    0.347122] pci 0000:00:1c.4:   bridge window [io  0x2000-0x2fff]
[    0.347130] pci 0000:00:1c.4:   bridge window [mem 0x80200000-0x803fffff]
[    0.347136] pci 0000:00:1c.4:   bridge window [mem 0x80400000-0x805fffff 64bit pref]
[    0.347145] pci 0000:00:1c.5: PCI bridge to [bus 04]
[    0.347150] pci 0000:00:1c.5:   bridge window [io  0x3000-0x3fff]
[    0.347157] pci 0000:00:1c.5:   bridge window [mem 0xfeb00000-0xfebfffff]
[    0.347164] pci 0000:00:1c.5:   bridge window [mem 0x80600000-0x807fffff 64bit pref]
[    0.347173] pci 0000:00:1e.0: PCI bridge to [bus 01]
[    0.347189] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.347193] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.347198] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.347202] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.347206] pci_bus 0000:00: resource 8 [mem 0x7be00000-0xdfffffff window]
[    0.347210] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff window]
[    0.347215] pci_bus 0000:02: resource 0 [io  0x1000-0x1fff]
[    0.347219] pci_bus 0000:02: resource 1 [mem 0x7be00000-0x7bffffff]
[    0.347224] pci_bus 0000:02: resource 2 [mem 0x80000000-0x801fffff 64bit pref]
[    0.347228] pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]
[    0.347232] pci_bus 0000:03: resource 1 [mem 0x80200000-0x803fffff]
[    0.347237] pci_bus 0000:03: resource 2 [mem 0x80400000-0x805fffff 64bit pref]
[    0.347241] pci_bus 0000:04: resource 0 [io  0x3000-0x3fff]
[    0.347245] pci_bus 0000:04: resource 1 [mem 0xfeb00000-0xfebfffff]
[    0.347249] pci_bus 0000:04: resource 2 [mem 0x80600000-0x807fffff 64bit pref]
[    0.347254] pci_bus 0000:01: resource 4 [io  0x0000-0x0cf7 window]
[    0.347258] pci_bus 0000:01: resource 5 [io  0x0d00-0xffff window]
[    0.347263] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.347267] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.347272] pci_bus 0000:01: resource 8 [mem 0x7be00000-0xdfffffff window]
[    0.347276] pci_bus 0000:01: resource 9 [mem 0xf0000000-0xfed8ffff window]
[    0.347561] NET: Registered protocol family 2
[    0.347942] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.347942] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.347942] TCP: Hash tables configured (established 8192 bind 8192)
[    0.347942] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.347942] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.347942] NET: Registered protocol family 1
[    0.347942] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.348514] PCI: CLS 32 bytes, default 64
[    0.348674] Unpacking initramfs...
[    1.190213] Freeing initrd memory: 16984K (f5ec3000 - f6f59000)
[    1.191506] audit: initializing netlink subsys (disabled)
[    1.191554] audit: type=2000 audit(1497863854.187:1): initialized
[    1.192687] workingset: timestamp_bits=14 max_order=19 bucket_order=5
[    1.192757] zbud: loaded
[    1.194689] bounce: pool size: 64 pages
[    1.194747] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    1.194836] io scheduler noop registered
[    1.194840] io scheduler deadline registered
[    1.194888] io scheduler cfq registered (default)
[    1.195114] pcieport 0000:00:1c.0: enabling device (0104 -> 0107)
[    1.195567] pcieport 0000:00:1c.4: enabling device (0104 -> 0107)
[    1.195909] pcieport 0000:00:1c.5: enabling device (0106 -> 0107)
[    1.196438] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.196462] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.196524] intel_idle: MWAIT substates: 0x20220
[    1.196527] intel_idle: v0.4.1 model 0x1C
[    1.196543] tsc: Marking TSC unstable due to TSC halts in idle states deeper than C2
[    1.196806] intel_idle: lapic_timer_reliable_states 0x2
[    1.197105] GHES: HEST is not enabled!
[    1.197251] isapnp: Scanning for PnP cards...
[    1.550642] isapnp: No Plug & Play device found
[    1.550904] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.571436] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.572853] Linux agpgart interface v0.103
[    1.574115] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    1.576818] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.576837] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.577427] mousedev: PS/2 mouse device common for all mice
[    1.577566] rtc_cmos 00:01: RTC can wake from S4
[    1.577848] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    1.577884] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram
[    1.577969] ledtrig-cpu: registered to indicate activity on CPUs
[    1.579285] NET: Registered protocol family 10
[    1.579914] mip6: Mobile IPv6
[    1.579920] NET: Registered protocol family 17
[    1.579928] mpls_gso: MPLS GSO support
[    1.580608] microcode: sig=0x106c2, pf=0x4, revision=0x218
[    1.580765] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.580773] Using IPI No-Shortcut mode
[    1.581292] registered taskstats version 1
[    1.581331] zswap: loaded using pool lzo/zbud
[    1.581552] ima: No TPM chip found, activating TPM-bypass!
[    1.582271] rtc_cmos 00:01: setting system clock to 2017-06-19 09:17:34 UTC (1497863854)
[    1.582428] PM: Hibernation image not present or could not be loaded.
[    1.583013] Freeing unused kernel memory: 752K (cd801000 - cd8bd000)
[    1.583189] Write protecting the kernel text: 5820k
[    1.583327] Write protecting the kernel read-only data: 1724k
[    1.583329] NX-protecting the kernel data: 4420k
[    1.583730] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.627572] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.628063] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.632164] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.633018] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.636093] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.636387] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.637928] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.638197] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.638473] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.638739] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.776858] ACPI: bus type USB registered
[    1.777024] usbcore: registered new interface driver usbfs
[    1.777104] usbcore: registered new interface driver hub
[    1.777236] usbcore: registered new device driver usb
[    1.779235] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.782488] ehci-pci: EHCI PCI platform driver
[    1.782957] ehci-pci 0000:00:1a.7: EHCI Host Controller
[    1.782988] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    1.783016] ehci-pci 0000:00:1a.7: debug port 1
[    1.786989] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported
[    1.787056] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfeaff400
[    1.787374] uhci_hcd: USB Universal Host Controller Interface driver
[    1.793303] pps_core: LinuxPPS API ver. 1 registered
[    1.793308] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.794293] PTP clock support registered
[    1.797347] tg3.c:v3.137 (May 11, 2014)
[    1.800068] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    1.800297] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.800305] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.800311] usb usb1: Product: EHCI Host Controller
[    1.800316] usb usb1: Manufacturer: Linux 4.9.0-3-686-pae ehci_hcd
[    1.800321] usb usb1: SerialNumber: 0000:00:1a.7
[    1.801182] hub 1-0:1.0: USB hub found
[    1.801226] hub 1-0:1.0: 6 ports detected
[    1.802370] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    1.802398] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    1.802426] ehci-pci 0000:00:1d.7: debug port 1
[    1.806404] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[    1.806472] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfeaff800
[    1.813736] SCSI subsystem initialized
[    1.820087] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.820454] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.820462] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.820467] usb usb2: Product: EHCI Host Controller
[    1.820473] usb usb2: Manufacturer: Linux 4.9.0-3-686-pae ehci_hcd
[    1.820478] usb usb2: SerialNumber: 0000:00:1d.7
[    1.821208] libata version 3.00 loaded.
[    1.821225] hub 2-0:1.0: USB hub found
[    1.821273] hub 2-0:1.0: 6 ports detected
[    1.822677] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    1.822715] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    1.822735] uhci_hcd 0000:00:1a.0: detected 2 ports
[    1.822814] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000c800
[    1.823142] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.823150] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.823155] usb usb3: Product: UHCI Host Controller
[    1.823160] usb usb3: Manufacturer: Linux 4.9.0-3-686-pae uhci_hcd
[    1.823166] usb usb3: SerialNumber: 0000:00:1a.0
[    1.823930] hub 3-0:1.0: USB hub found
[    1.823979] hub 3-0:1.0: 2 ports detected
[    1.825043] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    1.826083] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    1.826111] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    1.826136] uhci_hcd 0000:00:1a.1: detected 2 ports
[    1.826206] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000c480
[    1.826506] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.826514] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.826519] usb usb4: Product: UHCI Host Controller
[    1.826524] usb usb4: Manufacturer: Linux 4.9.0-3-686-pae uhci_hcd
[    1.826529] usb usb4: SerialNumber: 0000:00:1a.1
[    1.827527] hub 4-0:1.0: USB hub found
[    1.827574] hub 4-0:1.0: 2 ports detected
[    1.828706] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    1.828735] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[    1.828755] uhci_hcd 0000:00:1a.2: detected 2 ports
[    1.828837] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000c400
[    1.829114] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.829122] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.829127] usb usb5: Product: UHCI Host Controller
[    1.829132] usb usb5: Manufacturer: Linux 4.9.0-3-686-pae uhci_hcd
[    1.829138] usb usb5: SerialNumber: 0000:00:1a.2
[    1.829893] hub 5-0:1.0: USB hub found
[    1.829935] hub 5-0:1.0: 2 ports detected
[    1.831317] ata_piix 0000:00:1f.2: version 2.13
[    1.831603] ata_piix 0000:00:1f.2: MAP [ P0 — P1 — ]
[    1.839789] libphy: tg3 mdio bus: probed
[    1.841257] scsi host0: ata_piix
[    1.841825] scsi host1: ata_piix
[    1.842191] ata1: SATA max UDMA/133 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 19
[    1.842198] ata2: SATA max UDMA/133 cmd 0xe800 ctl 0xe480 bmdma 0xe408 irq 19
[    1.842539] ata_piix 0000:00:1f.5: MAP [ P0 — P1 — ]
[    1.849478] scsi host2: ata_piix
[    1.850718] scsi host3: ata_piix
[    1.851113] ata3: SATA max UDMA/133 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 19
[    1.851121] ata4: SATA max UDMA/133 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 19
[    1.851603] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.851642] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[    1.851663] uhci_hcd 0000:00:1d.0: detected 2 ports
[    1.851703] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d000
[    1.852069] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    1.852077] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.852082] usb usb6: Product: UHCI Host Controller
[    1.852087] usb usb6: Manufacturer: Linux 4.9.0-3-686-pae uhci_hcd
[    1.852092] usb usb6: SerialNumber: 0000:00:1d.0
[    1.852875] hub 6-0:1.0: USB hub found
[    1.852921] hub 6-0:1.0: 2 ports detected
[    1.853853] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.853884] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[    1.853903] uhci_hcd 0000:00:1d.1: detected 2 ports
[    1.853945] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000cc00
[    1.854231] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    1.854238] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.854243] usb usb7: Product: UHCI Host Controller
[    1.854249] usb usb7: Manufacturer: Linux 4.9.0-3-686-pae uhci_hcd
[    1.854253] usb usb7: SerialNumber: 0000:00:1d.1
[    1.855010] hub 7-0:1.0: USB hub found
[    1.855057] hub 7-0:1.0: 2 ports detected
[    1.856006] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.856105] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[    1.856124] uhci_hcd 0000:00:1d.2: detected 2 ports
[    1.856166] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c880
[    1.856426] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[    1.856434] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.856439] usb usb8: Product: UHCI Host Controller
[    1.856444] usb usb8: Manufacturer: Linux 4.9.0-3-686-pae uhci_hcd
[    1.856449] usb usb8: SerialNumber: 0000:00:1d.2
[    1.857219] hub 8-0:1.0: USB hub found
[    1.857261] hub 8-0:1.0: 2 ports detected
[    1.922573] Broadcom BCM57780 400:01: attached PHY driver [Broadcom BCM57780] (mii_bus:phy_addr=400:01, irq=-1)
[    1.924072] tg3 0000:04:00.0 eth0: Tigon3 [partno(BCM57780) rev 57780001] (PCI Express) MAC address 9c:8e:99:cd:98:21
[    1.924081] tg3 0000:04:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    1.924089] tg3 0000:04:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[    1.976222] tg3 0000:04:00.0 enp4s0: renamed from eth0
[    2.118371] random: fast init done
[    2.170370] ata1: SATA link down (SStatus 0 SControl 300)
[    2.186334] ata3: SATA link down (SStatus 0 SControl 300)
[    2.197053] ata4: SATA link down (SStatus 0 SControl 300)
[    2.208055] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x17f6981127a, max_idle_ns: 440795216274 ns
[    2.328187] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.344045] usb 7-1: new full-speed USB device number 2 using uhci_hcd
[    2.348370] ata2.00: CFA: 4GB ATA Flash Disk, AD B61FK, max UDMA/66
[    2.348375] ata2.00: 8000496 sectors, multi 0: LBA
[    2.368354] ata2.00: configured for UDMA/66
[    2.368814] scsi 1:0:0:0: Direct-Access     ATA      4GB ATA Flash Di 61FK PQ: 0 ANSI: 5
[    2.411623] sd 1:0:0:0: [sda] 8000496 512-byte logical blocks: (4.10 GB/3.81 GiB)
[    2.411834] sd 1:0:0:0: [sda] Write Protect is off
[    2.411843] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.411933] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.415913]  sda: sda1 sda2 < sda5 >
[    2.417677] sd 1:0:0:0: [sda] Attached SCSI disk
[    2.528134] usb 7-1: New USB device found, idVendor=e0ff, idProduct=0002
[    2.528144] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.528151] usb 7-1: Product: G4
[    2.528156] usb 7-1: Manufacturer: A.....
[    2.532093] usb 3-1: new full-speed USB device number 2 using uhci_hcd
[    2.535877] hidraw: raw HID events driver (C) Jiri Kosina
[    2.545662] usbcore: registered new interface driver usbhid
[    2.545666] usbhid: USB HID core driver
[    2.550290] input: A..... G4 as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/0003:E0FF:0002.0001/input/input3
[    2.551217] hid-generic 0003:E0FF:0002.0001: input,hidraw0: USB HID v1.00 Mouse [A..... G4] on usb-0000:00:1d.1-1/input0
[    2.556617] input: A..... G4 as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.1/0003:E0FF:0002.0002/input/input4
[    2.616682] hid-generic 0003:E0FF:0002.0002: input,hiddev0,hidraw1: USB HID v1.00 Keyboard [A..... G4] on usb-0000:00:1d.1-1/input1
[    2.745126] usb 3-1: New USB device found, idVendor=0403, idProduct=6001
[    2.745132] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.745136] usb 3-1: Product: FT232R USB UART
[    2.745140] usb 3-1: Manufacturer: FTDI
[    2.745143] usb 3-1: SerialNumber: A1014VVT
[    3.176154] usb 8-1: new low-speed USB device number 2 using uhci_hcd
[    3.363080] usb 8-1: New USB device found, idVendor=413c, idProduct=2003
[    3.363086] usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.363090] usb 8-1: Product: Dell USB Keyboard
[    3.363094] usb 8-1: Manufacturer: Dell
[    3.383267] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/0003:413C:2003.0003/input/input5
[    3.396153] usb 3-2: new full-speed USB device number 3 using uhci_hcd
[    3.440790] hid-generic 0003:413C:2003.0003: input,hidraw2: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.2-1/input0
[    3.610092] usb 3-2: New USB device found, idVendor=0403, idProduct=6001
[    3.610098] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.610102] usb 3-2: Product: FT232R USB UART
[    3.610105] usb 3-2: Manufacturer: FTDI
[    3.610109] usb 3-2: SerialNumber: AE018QAU
[    4.832184] floppy0: no floppy controllers found
[    4.832205] work still pending
[    4.904461] PM: Starting manual resume from disk
[    4.904470] PM: Hibernation image partition 8:5 present
[    4.904472] PM: Looking for hibernation image.
[    4.905263] PM: Image not found (code -22)
[    4.905269] PM: Hibernation image not present or could not be loaded.
[    5.154403] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    5.613971] ip_tables: (C) 2000-2006 Netfilter Core Team
[    5.637025] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    5.637457] systemd[1]: Detected architecture x86.
[    5.648223] systemd[1]: Set hostname to <debian>.
[    5.986716] systemd[1]: Listening on Journal Audit Socket.
[    5.987034] systemd[1]: Listening on udev Control Socket.
[    5.987262] systemd[1]: Listening on Journal Socket.
[    5.987419] systemd[1]: Listening on fsck to fsckd communication Socket.
[    5.987569] systemd[1]: Listening on Journal Socket (/dev/log).
[    5.987768] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    5.987907] systemd[1]: Listening on udev Kernel Socket.
[    6.150650] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    6.793595] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6
[    6.793609] ACPI: Power Button [PWRB]
[    6.793926] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
[    6.793937] ACPI: Power Button [PWRF]
[    7.028172] systemd-journald[194]: Received request to flush runtime journal from PID 1
[    7.030684] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    7.084724] [drm] Initialized
[    7.267605] usbcore: registered new interface driver usbserial
[    7.267683] usbcore: registered new interface driver usbserial_generic
[    7.267756] usbserial: USB Serial support registered for generic
[    7.275168] usbcore: registered new interface driver ftdi_sio
[    7.275257] usbserial: USB Serial support registered for FTDI USB Serial Device
[    7.275632] ftdi_sio 3-1:1.0: FTDI USB Serial Device converter detected
[    7.275817] usb 3-1: Detected FT232RL
[    7.279398] usb 3-1: FTDI USB Serial Device converter now attached to ttyUSB0
[    7.279539] ftdi_sio 3-2:1.0: FTDI USB Serial Device converter detected
[    7.279705] usb 3-2: Detected FT232RL
[    7.283742] usb 3-2: FTDI USB Serial Device converter now attached to ttyUSB1
[    7.315031] sd 1:0:0:0: Attached scsi generic sg0 type 0
[    7.353503] input: PC Speaker as /devices/platform/pcspkr/input/input8
[    7.417713] intel_powerclamp: No package C-state available
[    7.436274] pci 0000:00:00.0: Intel GM45 Chipset
[    7.436327] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[    7.436408] pci 0000:00:00.0: detected 65536K stolen memory
[    7.436504] [drm] Memory usable by graphics device = 2048M
[    7.436510] [drm] Replacing VGA console driver
[    7.437756] Console: switching to colour dummy device 80x25
[    7.458311] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    7.458315] [drm] Driver supports precise vblank timestamp query.
[    7.465539] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    7.465865] [drm] Skipping LVDS initialization for Hewlett-Packard HP t5740
[    7.471164] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC272: line_outs=1 (0x21/0x0/0x0/0x0/0x0) type:hp
[    7.471175] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    7.471183] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    7.471189] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    7.471194] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    7.471201] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[    7.562666] [drm] RC6 disabled, disabling runtime PM support
[    7.568389] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    7.570667] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10
[    7.572256] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0
[    7.586139] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    7.587884] input: HDA Intel HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[    7.734711] fbcon: inteldrmfb (fb0) is primary device
[    7.791528] ppdev: user-space parallel port driver
[    7.795374] iTCO_vendor_support: vendor-support=0
[    7.801223] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    7.801321] iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0860)
[    7.804182] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    7.817984] Console: switching to colour frame buffer device 240x67
[    7.872914] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    7.896654] Adding 2026492k swap on /dev/sda5.  Priority:-1 extents:1 across:2026492k FS
[    8.169688] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[    8.171373] tg3 0000:04:00.0 enp4s0: Link is down
[   10.208184] floppy0: no floppy controllers found
[   10.719187] usb 3-2: usbfs: interface 0 claimed by ftdi_sio while 'brltty' sets config #1
[   10.744579] ftdi_sio ttyUSB1: FTDI USB Serial Device converter now disconnected from ttyUSB1
[   10.744638] ftdi_sio 3-2:1.0: device disconnected
[   11.298793] input: BRLTTY 5.4 Linux Screen Driver Keyboard as /devices/virtual/input/input12
[   12.180480] random: crng init done
[   12.257260] tg3 0000:04:00.0 enp4s0: Link is up at 1000 Mbps, full duplex
[   12.257266] tg3 0000:04:00.0 enp4s0: Flow control is on for TX and on for RX
[   12.257288] IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready
root@debian:~#

Offline

 

#4  2017-06-19 14:22:25

  arecki - Użytkownik

arecki
Użytkownik
Skąd: 44 Bronson Lane Hensonville
Zarejestrowany: 2016-03-03

Re: phoenix usb

To jest świadome odłączenie?

Kod:

[   10.719187] usb 3-2: usbfs: interface 0 claimed by ftdi_sio while 'brltty' sets config #1
[   10.744579] ftdi_sio ttyUSB1: FTDI USB Serial Device converter now disconnected from ttyUSB1
[   10.744638] ftdi_sio 3-2:1.0: device disconnected

Wygląda na to, że ten brltty tu coś miesza.
Jeśli go nie potrzbujesz (wsparcie dla osób niewidomych) to go usuń i zobacz czy zadziała.

Ostatnio edytowany przez arecki (2017-06-19 14:27:38)

Offline

 

#5  2017-06-20 09:39:18

  Dami24 - Użytkownik

Dami24
Użytkownik
Zarejestrowany: 2017-06-18

Re: phoenix usb

Dzięki arecki :)

Ok poszło wszystko ok, tylko sprawa jest taka jak uruchamiam oscam jako user to 2 porty usb zablokowane , a jako root wszystko ok , gdzie tkwi problem ?

Offline

 

#6  2017-06-20 12:02:00

  arecki - Użytkownik

arecki
Użytkownik
Skąd: 44 Bronson Lane Hensonville
Zarejestrowany: 2016-03-03

Re: phoenix usb

OSCAM z tego co pamiętam był dedykowany do uruchamiania jako root.
Jak chcesz go uruchamiać jako użytkownik, to trzeba by mu dodać uprawnienia dostępu do tych portów.
Pokaż wynik

Kod:

ls -l /dev/ttyUSB0

Offline

 

#7  2017-06-20 20:19:54

  wikingagressor - Użytkownik

wikingagressor
Użytkownik
Skąd: Józefów k.Błonia, mazowieck
Zarejestrowany: 2015-02-03

Re: phoenix usb

Z tego co kojarze to za komunikacje przez tty odpowiada grupa dialup, trzeba dodac uzytkownika do niej.


Peace, Love and Debian for the World!!!

Offline

 

#8  2017-06-20 20:48:18

  lis6502 - Łowca lamerów

lis6502
Łowca lamerów
Skąd: Stalinogród
Zarejestrowany: 2008-12-04

Re: phoenix usb

A nie lepiej sprawdzić?

Kod:

crw--w---- 1 root    tty  4,  8 cze 20 15:13 /dev/tty8
crw--w---- 1 root    tty  4,  9 cze 20 15:13 /dev/tty9
crw-rw---- 1 root    uucp 4, 64 cze 20 15:13 /dev/ttyS0
crw-rw---- 1 root    uucp 4, 65 cze 20 15:13 /dev/ttyS1

Offline

 

#9  2017-06-20 21:30:43

  Dami24 - Użytkownik

Dami24
Użytkownik
Zarejestrowany: 2017-06-18

Re: phoenix usb

root@debian:/home/serwer# ls -l /dev/ttyUSB0
crw-rw---- 1 root dialout 188, 0 cze 20 21:30 /dev/ttyUSB0

Offline

 

#10  2017-06-20 22:22:20

  arecki - Użytkownik

arecki
Użytkownik
Skąd: 44 Bronson Lane Hensonville
Zarejestrowany: 2016-03-03

Re: phoenix usb

Dodaj sobie tego usera do grupy dialout.

Offline

 

#11  2017-06-20 22:41:30

  Dami24 - Użytkownik

Dami24
Użytkownik
Zarejestrowany: 2017-06-18

Re: phoenix usb

Spoko tylko ja nie jestem aż tak biegły w linuxie :)
Jak mam to zrobić ?

Offline

 

#12  2017-06-20 22:45:31

  Dami24 - Użytkownik

Dami24
Użytkownik
Zarejestrowany: 2017-06-18

Re: phoenix usb

sudo adduser nazwa_uzytkownika dialout ?

Tak ma to wyglądać ?
sudo adduser serwer dialout

Offline

 

#13  2017-06-20 22:54:11

  arecki - Użytkownik

arecki
Użytkownik
Skąd: 44 Bronson Lane Hensonville
Zarejestrowany: 2016-03-03

Re: phoenix usb

Jak już masz tego użytkownika to użyj usermod.

Ostatnio edytowany przez arecki (2017-06-20 22:55:32)

Offline

 

#14  2017-06-20 23:03:25

  seler - Użytkownik

seler
Użytkownik
Zarejestrowany: 2012-05-15

Re: phoenix usb

usermod -a -G dialout nazwa_uzyszkodnika


a to feler westchnął seler

Offline

 

#15  2017-06-20 23:28:37

  Dami24 - Użytkownik

Dami24
Użytkownik
Zarejestrowany: 2017-06-18

Re: phoenix usb

Ja dałem tak sudo adduser serwer dialout i działa :)
Zainstalowałem webmina, teraz chcę dodać do auo startu , więc zakładka start i zamykanie systemu.
Daję utwórz nową usługę i tu lipa nie działa to .

Nazwa usługi oscam (.service) coś nowego w nowym webmini-e


Polecenie do uruchomienia daję cd /usr/bin/./oscam

Polecenie do uruchomienia wyłączenia daję : killall -9 oscam


i nic nie działa ?

Offline

 

#16  2017-06-20 23:35:31

  wikingagressor - Użytkownik

wikingagressor
Użytkownik
Skąd: Józefów k.Błonia, mazowieck
Zarejestrowany: 2015-02-03

Re: phoenix usb

Dami24 napisał(-a):

Polecenie do uruchomienia daję cd /usr/bin/./oscam

i nic nie działa ?

Nie powinno to raczej wygladac tak:

Kod:

/usr/bin/oscam

Peace, Love and Debian for the World!!!

Offline

 

#17  2017-06-20 23:42:48

  Dami24 - Użytkownik

Dami24
Użytkownik
Zarejestrowany: 2017-06-18

Re: phoenix usb

Ok poprawiłem jest ok , co do zabicia killall -9 musiałem też mu pokazać ścieżkę /usr/bin/

dzięki wielkie koledzy piwko stawiam :)

Offline

 

#18  2017-06-21 07:17:18

  arecki - Użytkownik

arecki
Użytkownik
Skąd: 44 Bronson Lane Hensonville
Zarejestrowany: 2016-03-03

Re: phoenix usb

W przyszłości używaj znaczników kodu, ułatwi to czytanie i odpowiadanie.

Offline

 

Stopka forum

Powered by PunBB
© Copyright 2002–2005 Rickard Andersson
Nas ludzie lubią po prostu, a nie klikając w przyciski ;-)