Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!

Ogłoszenie

Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.

#1  2015-11-19 13:45:32

  patria - Użytkownik

patria
Użytkownik
Zarejestrowany: 2013-05-28

Dekoder DVB-T Omega t900 nie zawsze "widoczny"

Witam
Mam problem z odtworzeniem telewizji DVB-T po odłaczeniu komputera od napięcia. Po ponownym uruchomieniu Debiana 8.1 Kaffeine nie wykrywa dekodera. Polecenie lsusb wygląda tak:

Kod:

lsusb:

Bus 002 Device 002: ID 0424:2228 Standard Microsystems Corp. 9-in-2 Card Reader
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 005: ID 19d2:0031 ZTE WCDMA Technologies MSM MF110/MF627/MF636
Bus 001 Device 006: ID 048d:9135 Integrated Technology Express, Inc. Zolid Mini DVB-T Stick
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 002: ID 09da:000e A4 Tech Co., Ltd X-F710F Optical Mouse 3xFire Gaming Mouse
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

Jedynym sposobem na uruchomienia dekodera na Linuxie jest uruchomienie Windowsa, uruchomienie dekodera na WMP i następnie restart, ponownie uruchomić komputer na Debianie. Wtedy dekoder jest już wykrywany.
Moja płyta głowna to Asus P5k, dekoder podany w tytule.

Offline

 

#2  2015-11-19 15:09:44

  Pavlo950 - człowiek pasjonat :D

Pavlo950
człowiek pasjonat :D
Zarejestrowany: 2012-02-20
Serwis

Re: Dekoder DVB-T Omega t900 nie zawsze "widoczny"

A to to jest na usb?

Spróbuj VLC.

Offline

 

#3  2015-11-19 16:56:43

  neo86 - Lubię marudzić

neo86
Lubię marudzić
Skąd: California
Zarejestrowany: 2014-06-29

Re: Dekoder DVB-T Omega t900 nie zawsze "widoczny"

patria napisał(-a):

Witam
Mam problem z odtworzeniem telewizji DVB-T po odłaczeniu komputera od napięcia. Po ponownym uruchomieniu Debiana 8.1 Kaffeine nie wykrywa dekodera. Polecenie lsusb wygląda tak:

Kod:

lsusb:
Bus 001 Device 006: ID 048d:9135 Integrated Technology Express, Inc. Zolid Mini DVB-T Stick

Mam na takim samym chipie tuner DVB i działa poprawnie. Musisz dodać firmware z listy: http://www.linuxtv.org/wiki/index.php/DVB-T_USB_Devices bo w przypadku tego tunera na takim chipie "Zolid Mini DVB-T Stick" (z zewnątrz obudowa tunera wygląda różnie) działał on z marszu na kernelu 3.2.x a na nowszych jest już kłopot i ręcznie musisz dać firmware do /lib/firmware i będzie pięknie działać właśnie w Kaffeine. Pod VLC, MeTV był wykrywany ale nie wykrywał mi w ogóle kanałów TV i radiowych.

Ostatnio edytowany przez neo86 (2015-11-19 17:09:02)

Offline

 

#4  2015-11-19 17:39:28

  ilin - Palacz

ilin
Palacz
Skąd: PRLu
Zarejestrowany: 2006-05-03

Re: Dekoder DVB-T Omega t900 nie zawsze "widoczny"

@patria
Pokaż nam wynik polecenia

Kod:

dmesg

Najlepiej raz jak działa tuner.

Drugi raz jak nie działa.

Porównamy co o nim system nam powie.

neo86 napisał(-a):

Pod VLC, MeTV był wykrywany ale nie wykrywał mi w ogóle kanałów TV i radiowych.

Jakbyś potrafił się tymi programami posługiwać to i w nich by wszystko działało.


Problemy rozwiązujemy na forum nie na PW -> Niech inni na tym skorzystają.
Polski portal Debiana

Offline

 

#5  2015-11-19 20:26:08

  patria - Użytkownik

patria
Użytkownik
Zarejestrowany: 2013-05-28

Re: Dekoder DVB-T Omega t900 nie zawsze "widoczny"

dmesg przy działającym tunerze:

Kod:

dmesg

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.16.0-4-686-pae (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt11-1+deb8u6 (2015-11-09)
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cff7ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cff80000-0x00000000cff8dfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000cff8e000-0x00000000cffdffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000cffe0000-0x00000000cfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000012fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI: System manufacturer P5K/P5K, BIOS 1201    10/14/2008
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x130000 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-DFFFF write-protect
[    0.000000]   E0000-EFFFF write-through
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0D0000000 mask FF0000000 uncachable
[    0.000000]   1 base 0E0000000 mask FE0000000 uncachable
[    0.000000]   2 base 000000000 mask F00000000 write-back
[    0.000000]   3 base 100000000 mask FE0000000 write-back
[    0.000000]   4 base 120000000 mask FF0000000 write-back
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
[    0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [c00ff780]
[    0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x37200000-0x373fffff]
[    0.000000]  [mem 0x37200000-0x373fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x34000000-0x371fffff]
[    0.000000]  [mem 0x34000000-0x371fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x33ffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x33ffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x37400000-0x375fdfff]
[    0.000000]  [mem 0x37400000-0x375fdfff] page 4k
[    0.000000] BRK [0x01798000, 0x01798fff] PGTABLE
[    0.000000] BRK [0x01799000, 0x0179afff] PGTABLE
[    0.000000] BRK [0x0179b000, 0x0179bfff] PGTABLE
[    0.000000] BRK [0x0179c000, 0x0179cfff] PGTABLE
[    0.000000] RAMDISK: [mem 0x362a4000-0x37149fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x000FBCD0 000014 (v00 ACPIAM)
[    0.000000] ACPI: RSDT 0xCFF80000 00003C (v01 A_M_I_ OEMRSDT  10000814 MSFT 00000097)
[    0.000000] ACPI: FACP 0xCFF80200 000084 (v02 A_M_I_ OEMFACP  10000814 MSFT 00000097)
[    0.000000] ACPI: DSDT 0xCFF80440 0090AA (v01 A0751  A0751077 00000077 INTL 20060113)
[    0.000000] ACPI: FACS 0xCFF8E000 000040
[    0.000000] ACPI: APIC 0xCFF80390 00006C (v01 A_M_I_ OEMAPIC  10000814 MSFT 00000097)
[    0.000000] ACPI: MCFG 0xCFF80400 00003C (v01 A_M_I_ OEMMCFG  10000814 MSFT 00000097)
[    0.000000] ACPI: OEMB 0xCFF8E040 000081 (v01 A_M_I_ AMI_OEM  10000814 MSFT 00000097)
[    0.000000] ACPI: HPET 0xCFF894F0 000038 (v01 A_M_I_ OEMHPET  10000814 MSFT 00000097)
[    0.000000] ACPI: OSFR 0xCFF89530 0000B0 (v01 A_M_I_ OEMOSFR  10000814 MSFT 00000097)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 3978MB HIGHMEM available.
[    0.000000] 885MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 375fe000
[    0.000000]   low ram: 0 - 375fe000
[    0.000000] BRK [0x0179d000, 0x0179dfff] PGTABLE
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   Normal   [mem 0x01000000-0x375fdfff]
[    0.000000]   HighMem  [mem 0x375fe000-0x2fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0xcff7ffff]
[    0.000000]   node   0: [mem 0x00000000-0x2fffffff]
[    0.000000] On node 0 totalpages: 1048350
[    0.000000] free_area_init_node: node 0, pgdat c1658ec0, node_mem_map f3ca4020
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   Normal zone: 1740 pages used for memmap
[    0.000000]   Normal zone: 222718 pages, LIFO batch:31
[    0.000000]   HighMem zone: 7957 pages used for memmap
[    0.000000]   HighMem zone: 821634 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
[    0.000000] e820: [mem 0xd0000000-0xfedfffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @f75b4000 s34752 r0 d22592 u57344
[    0.000000] pcpu-alloc: s34752 r0 d22592 u57344 alloc=14*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1046578
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.16.0-4-686-pae root=UUID=8e593d33-3055-4d60-9c09-df554c17fc67 ro quiet
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] CPU0 microcode updated early to revision 0x60f, date = 2010-09-29
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (000375fe:00130000)
[    0.000000] Initializing Movable for node 0 (00000000:00000000)
[    0.000000] Memory: 4130536K/4193400K available (4599K kernel code, 518K rwdata, 1448K rodata, 656K init, 460K bss, 62864K reserved, 3286536K highmem)
[    0.000000] virtual kernel memory layout:
    fixmap  : 0xffd36000 - 0xfffff000   (2852 kB)
    pkmap   : 0xff600000 - 0xff800000   (2048 kB)
    vmalloc : 0xf7dfe000 - 0xff5fe000   ( 120 MB)
    lowmem  : 0xc0000000 - 0xf75fe000   ( 885 MB)
      .init : 0xc166d000 - 0xc1711000   ( 656 kB)
      .data : 0xc147e340 - 0xc166b880   (1973 kB)
      .text : 0xc1000000 - 0xc147e340   (4600 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] Hierarchical RCU implementation.
[    0.000000]     RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000]     RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS:2304 nr_irqs:712 16
[    0.000000] CPU 0 irqstacks, hard=f3806000 soft=f3808000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2671.632 MHz processor
[    0.004011] Calibrating delay loop (skipped), value calculated using timer frequency.. 5343.26 BogoMIPS (lpj=10686528)
[    0.004014] pid_max: default: 32768 minimum: 301
[    0.004022] ACPI: Core revision 20140424
[    0.012714] ACPI: All ACPI Tables successfully acquired
[    0.016027] Security Framework initialized
[    0.016043] AppArmor: AppArmor disabled by boot time parameter
[    0.016044] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.016061] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.016063] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.016308] Initializing cgroup subsys memory
[    0.016313] Initializing cgroup subsys devices
[    0.016320] Initializing cgroup subsys freezer
[    0.016323] Initializing cgroup subsys net_cls
[    0.016329] Initializing cgroup subsys blkio
[    0.016333] Initializing cgroup subsys perf_event
[    0.016335] Initializing cgroup subsys net_prio
[    0.016359] CPU: Physical Processor ID: 0
[    0.016360] CPU: Processor Core ID: 0
[    0.016366] mce: CPU supports 6 MCE banks
[    0.016374] CPU0: Thermal monitoring enabled (TM2)
[    0.016376] process: using mwait in idle threads
[    0.016384] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
tlb_flushall_shift: -1
[    0.016511] Freeing SMP alternatives memory: 20K (c1711000 - c1716000)
[    0.017339] ftrace: allocating 20756 entries in 41 pages
[    0.024050] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.028140] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.067823] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU     E8200  @ 2.66GHz (fam: 06, model: 17, stepping: 06)
[    0.068000] APIC calibration not consistent with PM-Timer: 155ms instead of 100ms
[    0.068000] APIC delta adjusted to PM-Timer: 2087189 (3255973)
[    0.068000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[    0.068000] ... version:                2
[    0.068000] ... bit width:              40
[    0.068000] ... generic registers:      2
[    0.068000] ... value mask:             000000ffffffffff
[    0.068000] ... max period:             000000007fffffff
[    0.068000] ... fixed-purpose events:   3
[    0.068000] ... event mask:             0000000700000003
[    0.068000] CPU 1 irqstacks, hard=f3946000 soft=f3948000
[    0.068000] x86: Booting SMP configuration:
[    0.068000] .... node  #0, CPUs:      #1
[    0.008000] Initializing CPU#1
[    0.079040] x86: Booted up 1 node, 2 CPUs
[    0.079044] smpboot: Total of 2 processors activated (10686.52 BogoMIPS)
[    0.079135] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.080107] devtmpfs: initialized
[    0.080258] PM: Registering ACPI NVS region [mem 0xcff8e000-0xcffdffff] (335872 bytes)
[    0.080387] pinctrl core: initialized pinctrl subsystem
[    0.080463] NET: Registered protocol family 16
[    0.080572] cpuidle: using governor ladder
[    0.080574] cpuidle: using governor menu
[    0.080621] ACPI: bus type PCI registered
[    0.080624] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.080702] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.080705] PCI: not using MMCONFIG
[    0.080820] PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX.
[    0.080870] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
[    0.080871] PCI: Using configuration type 1 for base access
[    0.092077] ACPI: Added _OSI(Module Device)
[    0.092077] ACPI: Added _OSI(Processor Device)
[    0.092077] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.092077] ACPI: Added _OSI(Processor Aggregator Device)
[    0.097167] ACPI: Executed 1 blocks of module-level executable AML code
[    0.101909] ACPI: Dynamic OEM Table Load:
[    0.101915] ACPI: SSDT 0xF3A06A00 0001D2 (v01 AMI    CPU1PM   00000001 INTL 20060113)
[    0.102313] ACPI: Dynamic OEM Table Load:
[    0.102317] ACPI: SSDT 0xF3A06800 000143 (v01 AMI    CPU2PM   00000001 INTL 20060113)
[    0.102689] ACPI: Interpreter enabled
[    0.102706] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[    0.102718] ACPI: (supports S0 S1 S3 S4 S5)
[    0.102720] ACPI: Using IOAPIC for interrupt routing
[    0.102739] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.103205] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.103207] PCI: Using MMCONFIG for extended config space
[    0.103221] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.109464] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.109469] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.109473] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.109724] PCI host bridge to bus 0000:00
[    0.109727] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.109729] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.109731] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.109733] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.109734] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
[    0.109736] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xffffffff]
[    0.109745] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
[    0.109838] pci 0000:00:01.0: [8086:29c1] type 01 class 0x060400
[    0.109872] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.109911] pci 0000:00:01.0: System wakeup disabled by ACPI
[    0.109975] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[    0.110012] pci 0000:00:1a.0: reg 0x20: [io  0xb800-0xb81f]
[    0.110092] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.110139] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[    0.110174] pci 0000:00:1a.1: reg 0x20: [io  0xb880-0xb89f]
[    0.110253] pci 0000:00:1a.1: System wakeup disabled by ACPI
[    0.110300] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
[    0.110336] pci 0000:00:1a.2: reg 0x20: [io  0xbc00-0xbc1f]
[    0.110416] pci 0000:00:1a.2: System wakeup disabled by ACPI
[    0.110469] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[    0.110487] pci 0000:00:1a.7: reg 0x10: [mem 0xfe7ffc00-0xfe7fffff]
[    0.110564] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.110607] pci 0000:00:1a.7: System wakeup disabled by ACPI
[    0.110658] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[    0.110673] pci 0000:00:1b.0: reg 0x10: [mem 0xfe7f8000-0xfe7fbfff 64bit]
[    0.110734] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.110814] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[    0.110877] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.110919] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.110968] pci 0000:00:1c.4: [8086:2948] type 01 class 0x060400
[    0.111031] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.111073] pci 0000:00:1c.4: System wakeup disabled by ACPI
[    0.111118] pci 0000:00:1c.5: [8086:294a] type 01 class 0x060400
[    0.111181] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.111224] pci 0000:00:1c.5: System wakeup disabled by ACPI
[    0.111271] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[    0.111307] pci 0000:00:1d.0: reg 0x20: [io  0xb080-0xb09f]
[    0.111386] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.111433] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[    0.111469] pci 0000:00:1d.1: reg 0x20: [io  0xb400-0xb41f]
[    0.111547] pci 0000:00:1d.1: System wakeup disabled by ACPI
[    0.111595] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[    0.111630] pci 0000:00:1d.2: reg 0x20: [io  0xb480-0xb49f]
[    0.111709] pci 0000:00:1d.2: System wakeup disabled by ACPI
[    0.111763] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[    0.111781] pci 0000:00:1d.7: reg 0x10: [mem 0xfe7ff800-0xfe7ffbff]
[    0.111858] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.111901] pci 0000:00:1d.7: System wakeup disabled by ACPI
[    0.111946] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[    0.112027] pci 0000:00:1e.0: System wakeup disabled by ACPI
[    0.112076] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100
[    0.112144] pci 0000:00:1f.0: can't claim BAR 13 [io  0x0800-0x087f]: address conflict with ACPI CPU throttle [io  0x0810-0x0815]
[    0.112148] pci 0000:00:1f.0: quirk: [io  0x0480-0x04bf] claimed by ICH6 GPIO
[    0.112151] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
[    0.112252] pci 0000:00:1f.2: [8086:2921] type 00 class 0x01018f
[    0.112265] pci 0000:00:1f.2: reg 0x10: [io  0xa000-0xa007]
[    0.112272] pci 0000:00:1f.2: reg 0x14: [io  0x9c00-0x9c03]
[    0.112278] pci 0000:00:1f.2: reg 0x18: [io  0x9880-0x9887]
[    0.112285] pci 0000:00:1f.2: reg 0x1c: [io  0x9800-0x9803]
[    0.112291] pci 0000:00:1f.2: reg 0x20: [io  0x9480-0x948f]
[    0.112298] pci 0000:00:1f.2: reg 0x24: [io  0x9400-0x940f]
[    0.112394] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[    0.112407] pci 0000:00:1f.3: reg 0x10: [mem 0xfe7ff400-0xfe7ff4ff 64bit]
[    0.112424] pci 0000:00:1f.3: reg 0x20: [io  0x0400-0x041f]
[    0.112509] pci 0000:00:1f.5: [8086:2926] type 00 class 0x010185
[    0.112522] pci 0000:00:1f.5: reg 0x10: [io  0xb000-0xb007]
[    0.112528] pci 0000:00:1f.5: reg 0x14: [io  0xac00-0xac03]
[    0.112535] pci 0000:00:1f.5: reg 0x18: [io  0xa880-0xa887]
[    0.112542] pci 0000:00:1f.5: reg 0x1c: [io  0xa800-0xa803]
[    0.112548] pci 0000:00:1f.5: reg 0x20: [io  0xa480-0xa48f]
[    0.112555] pci 0000:00:1f.5: reg 0x24: [io  0xa400-0xa40f]
[    0.112694] pci 0000:01:00.0: [1002:9490] type 00 class 0x030000
[    0.112708] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.112717] pci 0000:01:00.0: reg 0x18: [mem 0xfe8e0000-0xfe8effff 64bit]
[    0.112723] pci 0000:01:00.0: reg 0x20: [io  0xc000-0xc0ff]
[    0.112734] pci 0000:01:00.0: reg 0x30: [mem 0xfe8c0000-0xfe8dffff pref]
[    0.112762] pci 0000:01:00.0: supports D1 D2
[    0.112811] pci 0000:01:00.1: [1002:aa38] type 00 class 0x040300
[    0.112824] pci 0000:01:00.1: reg 0x10: [mem 0xfe8fc000-0xfe8fffff 64bit]
[    0.112874] pci 0000:01:00.1: supports D1 D2
[    0.112931] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.112934] pci 0000:00:01.0:   bridge window [io  0xc000-0xcfff]
[    0.112936] pci 0000:00:01.0:   bridge window [mem 0xfe800000-0xfe8fffff]
[    0.112940] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.112991] pci 0000:00:1c.0: PCI bridge to [bus 04]
[    0.112998] pci 0000:00:1c.0:   bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[    0.113080] pci 0000:03:00.0: [197b:2363] type 00 class 0x010185
[    0.113163] pci 0000:03:00.0: reg 0x24: [mem 0xfeafe000-0xfeafffff]
[    0.113176] pci 0000:03:00.0: reg 0x30: [mem 0xfeae0000-0xfeaeffff pref]
[    0.113227] pci 0000:03:00.0: PME# supported from D3hot
[    0.113301] pci 0000:03:00.1: [197b:2363] type 00 class 0x010185
[    0.113320] pci 0000:03:00.1: reg 0x10: [io  0xdc00-0xdc07]
[    0.113330] pci 0000:03:00.1: reg 0x14: [io  0xd880-0xd883]
[    0.113339] pci 0000:03:00.1: reg 0x18: [io  0xd800-0xd807]
[    0.113348] pci 0000:03:00.1: reg 0x1c: [io  0xd480-0xd483]
[    0.113358] pci 0000:03:00.1: reg 0x20: [io  0xd400-0xd40f]
[    0.113465] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.113474] pci 0000:00:1c.4: PCI bridge to [bus 03]
[    0.113477] pci 0000:00:1c.4:   bridge window [io  0xd000-0xdfff]
[    0.113480] pci 0000:00:1c.4:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.113551] pci 0000:02:00.0: [1969:1048] type 00 class 0x020000
[    0.113574] pci 0000:02:00.0: reg 0x10: [mem 0xfe9c0000-0xfe9fffff 64bit]
[    0.113621] pci 0000:02:00.0: reg 0x30: [mem 0xfe9a0000-0xfe9bffff pref]
[    0.113674] pci 0000:02:00.0: PME# supported from D3hot D3cold
[    0.113729] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.113737] pci 0000:00:1c.5: PCI bridge to [bus 02]
[    0.113742] pci 0000:00:1c.5:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.113792] pci 0000:05:02.0: [1102:0004] type 00 class 0x040100
[    0.113807] pci 0000:05:02.0: reg 0x10: [io  0xe880-0xe89f]
[    0.113870] pci 0000:05:02.0: supports D1 D2
[    0.113914] pci 0000:05:02.1: [1102:7003] type 00 class 0x098000
[    0.113928] pci 0000:05:02.1: reg 0x10: [io  0xec00-0xec07]
[    0.113991] pci 0000:05:02.1: supports D1 D2
[    0.114037] pci 0000:05:02.2: [1102:4001] type 00 class 0x0c0010
[    0.114053] pci 0000:05:02.2: reg 0x10: [mem 0xfebff800-0xfebfffff]
[    0.114062] pci 0000:05:02.2: reg 0x14: [mem 0xfebf8000-0xfebfbfff]
[    0.114122] pci 0000:05:02.2: supports D1 D2
[    0.114123] pci 0000:05:02.2: PME# supported from D0 D1 D2 D3hot
[    0.114183] pci 0000:05:03.0: [1106:3044] type 00 class 0x0c0010
[    0.114199] pci 0000:05:03.0: reg 0x10: [mem 0xfebff000-0xfebff7ff]
[    0.114208] pci 0000:05:03.0: reg 0x14: [io  0xe800-0xe87f]
[    0.114268] pci 0000:05:03.0: supports D2
[    0.114270] pci 0000:05:03.0: PME# supported from D2 D3hot D3cold
[    0.114345] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
[    0.114348] pci 0000:00:1e.0:   bridge window [io  0xe000-0xefff]
[    0.114351] pci 0000:00:1e.0:   bridge window [mem 0xfeb00000-0xfebfffff]
[    0.114356] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.114358] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.114360] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.114362] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[    0.114363] pci 0000:00:1e.0:   bridge window [mem 0xd0000000-0xffffffff] (subtractive decode)
[    0.114387] pci_bus 0000:00: on NUMA node 0
[    0.114932] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.114986] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.115037] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.115089] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[    0.115140] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.115192] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15)
[    0.115244] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[    0.115295] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[    0.115350] ACPI: Enabled 2 GPEs in block 00 to 3F
[    0.115421] vgaarb: setting as boot device: PCI:0000:01:00.0
[    0.115421] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.115421] vgaarb: loaded
[    0.115421] vgaarb: bridge control possible 0000:01:00.0
[    0.115421] PCI: Using ACPI for IRQ routing
[    0.115421] PCI: pci_cache_line_size set to 64 bytes
[    0.115421] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.115421] e820: reserve RAM buffer [mem 0xcff80000-0xcfffffff]
[    0.115421] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[    0.115421] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.115421] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[    0.117010] Switched to clocksource hpet
[    0.122384] pnp: PnP ACPI init
[    0.122397] ACPI: bus type PNP registered
[    0.122462] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
[    0.122466] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.122527] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.122690] system 00:02: [io  0x0290-0x0297] has been reserved
[    0.122693] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.122860] system 00:03: [io  0x04d0-0x04d1] has been reserved
[    0.122863] system 00:03: [io  0x0800-0x087f] could not be reserved
[    0.122865] system 00:03: [io  0x0480-0x04bf] has been reserved
[    0.122867] system 00:03: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.122870] system 00:03: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.122872] system 00:03: [mem 0xfed50000-0xfed8ffff] has been reserved
[    0.122874] system 00:03: [mem 0xffa00000-0xffafffff] has been reserved
[    0.122876] system 00:03: [mem 0xffb00000-0xffbfffff] has been reserved
[    0.122878] system 00:03: [mem 0xffe00000-0xffefffff] has been reserved
[    0.122881] system 00:03: [mem 0xfff00000-0xfffffffe] has been reserved
[    0.122883] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.123108] pnp 00:04: [dma 0 disabled]
[    0.123173] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.123255] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.123258] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.123260] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.123320] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.123389] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
[    0.123392] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.123576] system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.123578] system 00:08: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.123581] system 00:08: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.123583] system 00:08: [mem 0x00100000-0xcfffffff] could not be reserved
[    0.123585] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.123698] pnp: PnP ACPI: found 9 devices
[    0.123700] ACPI: bus type PNP unregistered
[    0.123704] PnPBIOS: Disabled by ACPI PNP
[    0.160327] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 04] add_size 1000
[    0.160331] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 400000
[    0.160338] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
[    0.160345] pci 0000:00:1c.5: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
[    0.160347] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[    0.160357] pci 0000:00:1f.0: BAR 13: [io  0x0800-0x087f] has bogus alignment
[    0.160361] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 400000
[    0.160363] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.160365] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.160367] pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[    0.160369] pci 0000:00:1c.5: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[    0.160375] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf0000000-0xf03fffff]
[    0.160380] pci 0000:00:1c.4: BAR 15: assigned [mem 0xf0400000-0xf05fffff 64bit pref]
[    0.160385] pci 0000:00:1c.5: BAR 15: assigned [mem 0xf0600000-0xf07fffff 64bit pref]
[    0.160388] pci 0000:00:1c.0: BAR 13: assigned [io  0x1000-0x1fff]
[    0.160391] pci 0000:00:1c.5: BAR 13: assigned [io  0x2000-0x2fff]
[    0.160393] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.160396] pci 0000:00:01.0:   bridge window [io  0xc000-0xcfff]
[    0.160399] pci 0000:00:01.0:   bridge window [mem 0xfe800000-0xfe8fffff]
[    0.160401] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.160405] pci 0000:00:1c.0: PCI bridge to [bus 04]
[    0.160407] pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
[    0.160411] pci 0000:00:1c.0:   bridge window [mem 0xf0000000-0xf03fffff]
[    0.160414] pci 0000:00:1c.0:   bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[    0.160419] pci 0000:00:1c.4: PCI bridge to [bus 03]
[    0.160422] pci 0000:00:1c.4:   bridge window [io  0xd000-0xdfff]
[    0.160425] pci 0000:00:1c.4:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.160429] pci 0000:00:1c.4:   bridge window [mem 0xf0400000-0xf05fffff 64bit pref]
[    0.160433] pci 0000:00:1c.5: PCI bridge to [bus 02]
[    0.160436] pci 0000:00:1c.5:   bridge window [io  0x2000-0x2fff]
[    0.160440] pci 0000:00:1c.5:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.160443] pci 0000:00:1c.5:   bridge window [mem 0xf0600000-0xf07fffff 64bit pref]
[    0.160448] pci 0000:00:1e.0: PCI bridge to [bus 05]
[    0.160450] pci 0000:00:1e.0:   bridge window [io  0xe000-0xefff]
[    0.160454] pci 0000:00:1e.0:   bridge window [mem 0xfeb00000-0xfebfffff]
[    0.160461] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.160463] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.160465] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.160466] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[    0.160468] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xffffffff]
[    0.160470] pci_bus 0000:01: resource 0 [io  0xc000-0xcfff]
[    0.160472] pci_bus 0000:01: resource 1 [mem 0xfe800000-0xfe8fffff]
[    0.160474] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.160476] pci_bus 0000:04: resource 0 [io  0x1000-0x1fff]
[    0.160478] pci_bus 0000:04: resource 1 [mem 0xf0000000-0xf03fffff]
[    0.160480] pci_bus 0000:04: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[    0.160482] pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
[    0.160484] pci_bus 0000:03: resource 1 [mem 0xfea00000-0xfeafffff]
[    0.160486] pci_bus 0000:03: resource 2 [mem 0xf0400000-0xf05fffff 64bit pref]
[    0.160487] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    0.160489] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff]
[    0.160491] pci_bus 0000:02: resource 2 [mem 0xf0600000-0xf07fffff 64bit pref]
[    0.160493] pci_bus 0000:05: resource 0 [io  0xe000-0xefff]
[    0.160495] pci_bus 0000:05: resource 1 [mem 0xfeb00000-0xfebfffff]
[    0.160497] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7]
[    0.160498] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff]
[    0.160500] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[    0.160502] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff]
[    0.160504] pci_bus 0000:05: resource 8 [mem 0xd0000000-0xffffffff]
[    0.160541] NET: Registered protocol family 2
[    0.160743] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.160759] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.160785] TCP: Hash tables configured (established 8192 bind 8192)
[    0.160804] TCP: reno registered
[    0.160806] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.160814] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.160867] NET: Registered protocol family 1
[    0.161777] pci 0000:01:00.0: Video device with shadowed ROM
[    0.161794] PCI: CLS 32 bytes, default 64
[    0.161837] Unpacking initramfs...
[    0.442576] Freeing initrd memory: 15000K (f62a4000 - f714a000)
[    0.442835] microcode: CPU0 sig=0x10676, pf=0x1, revision=0x60f
[    0.442844] microcode: CPU1 sig=0x10676, pf=0x1, revision=0x60c
[    0.442932] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.443241] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.443315] audit: initializing netlink subsys (disabled)
[    0.443341] audit: type=2000 audit(1447959774.440:1): initialized
[    0.443645] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.443661] zbud: loaded
[    0.443745] VFS: Disk quotas dquot_6.5.2
[    0.443762] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.443828] msgmni has been set to 1677
[    0.444155] alg: No test for stdrng (krng)
[    0.444176] bounce: pool size: 64 pages
[    0.444189] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.444233] io scheduler noop registered
[    0.444235] io scheduler deadline registered
[    0.444266] io scheduler cfq registered (default)
[    0.444479] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.444531] pcieport 0000:00:1c.0: enabling device (0106 -> 0107)
[    0.444597] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[    0.444718] pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X
[    0.444776] pcieport 0000:00:1c.5: enabling device (0106 -> 0107)
[    0.444841] pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X
[    0.444934] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.444953] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.444973] intel_idle: does not run on family 6 model 23
[    0.445027] GHES: HEST is not enabled!
[    0.445046] isapnp: Scanning for PnP cards...
[    0.797770] isapnp: No Plug & Play device found
[    0.797843] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.818191] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.818607] Linux agpgart interface v0.103
[    0.818891] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    0.818892] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    0.819416] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.819522] mousedev: PS/2 mouse device common for all mice
[    0.819578] rtc_cmos 00:01: RTC can wake from S4
[    0.819692] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    0.819715] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.819731] ledtrig-cpu: registered to indicate activity on CPUs
[    0.820262] TCP: cubic registered
[    0.820288] NET: Registered protocol family 10
[    0.820513] mip6: Mobile IPv6
[    0.820517] NET: Registered protocol family 17
[    0.820521] mpls_gso: MPLS GSO support
[    0.820663] Using IPI No-Shortcut mode
[    0.820776] registered taskstats version 1
[    0.821208] rtc_cmos 00:01: setting system clock to 2015-11-19 19:02:55 UTC (1447959775)
[    0.821260] PM: Hibernation image not present or could not be loaded.
[    0.821621] Freeing unused kernel memory: 656K (c166d000 - c1711000)
[    0.821653] Write protecting the kernel text: 4604k
[    0.821690] Write protecting the kernel read-only data: 1452k
[    0.821691] NX-protecting the kernel data: 3588k
[    0.830107] systemd-udevd[60]: starting version 215
[    0.830410] random: systemd-udevd urandom read with 0 bits of entropy available
[    0.839043] ACPI: bus type USB registered
[    0.839073] usbcore: registered new interface driver usbfs
[    0.839085] usbcore: registered new interface driver hub
[    0.839973] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.842781] atl1 0000:02:00.0: version 2.1.3
[    0.844069] usbcore: registered new device driver usb
[    0.844548] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.844826] uhci_hcd: USB Universal Host Controller Interface driver
[    0.844930] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    0.844937] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.844944] uhci_hcd 0000:00:1a.0: detected 2 ports
[    0.844976] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800
[    0.845216] ehci-pci: EHCI PCI platform driver
[    0.846043] SCSI subsystem initialized
[    0.847436] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[    0.847439] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.847441] usb usb1: Product: UHCI Host Controller
[    0.847442] usb usb1: Manufacturer: Linux 3.16.0-4-686-pae uhci_hcd
[    0.847444] usb usb1: SerialNumber: 0000:00:1a.0
[    0.847571] hub 1-0:1.0: USB hub found
[    0.847578] hub 1-0:1.0: 2 ports detected
[    0.848099] ehci-pci 0000:00:1a.7: EHCI Host Controller
[    0.848105] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 2
[    0.848116] ehci-pci 0000:00:1a.7: debug port 1
[    0.852015] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported
[    0.852100] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfe7ffc00
[    0.852225] libata version 3.00 loaded.
[    0.852876] ahci 0000:03:00.0: version 3.0
[    0.864017] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    0.864061] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.864063] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.864065] usb usb2: Product: EHCI Host Controller
[    0.864067] usb usb2: Manufacturer: Linux 3.16.0-4-686-pae ehci_hcd
[    0.864069] usb usb2: SerialNumber: 0000:00:1a.7
[    0.864185] hub 2-0:1.0: USB hub found
[    0.864192] hub 2-0:1.0: 6 ports detected
[    0.868047] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[    0.868050] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
[    0.868413] scsi0 : ahci
[    0.868503] scsi1 : ahci
[    0.868561] ata1: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe100 irq 16
[    0.868565] ata2: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe180 irq 16
[    0.868602] pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
[    0.872043] scsi2 : pata_jmicron
[    0.872122] scsi3 : pata_jmicron
[    0.872173] ata3: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 17
[    0.872174] ata4: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 17
[    0.888053] hub 1-0:1.0: USB hub found
[    0.888060] hub 1-0:1.0: 2 ports detected
[    0.888209] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.888215] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 3
[    0.888225] ehci-pci 0000:00:1d.7: debug port 1
[    0.892113] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[    0.892129] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfe7ff800
[    0.904012] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.904054] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    0.904056] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.904058] usb usb3: Product: EHCI Host Controller
[    0.904060] usb usb3: Manufacturer: Linux 3.16.0-4-686-pae ehci_hcd
[    0.904061] usb usb3: SerialNumber: 0000:00:1d.7
[    0.904172] hub 3-0:1.0: USB hub found
[    0.904177] hub 3-0:1.0: 6 ports detected
[    0.904399] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    0.904404] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    0.904409] uhci_hcd 0000:00:1a.1: detected 2 ports
[    0.904434] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
[    0.904477] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    0.904479] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.904481] usb usb4: Product: UHCI Host Controller
[    0.904483] usb usb4: Manufacturer: Linux 3.16.0-4-686-pae uhci_hcd
[    0.904484] usb usb4: SerialNumber: 0000:00:1a.1
[    0.904593] hub 4-0:1.0: USB hub found
[    0.904600] hub 4-0:1.0: 2 ports detected
[    0.904760] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    0.904765] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[    0.904770] uhci_hcd 0000:00:1a.2: detected 2 ports
[    0.904786] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000bc00
[    0.904828] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    0.904830] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.904832] usb usb5: Product: UHCI Host Controller
[    0.904834] usb usb5: Manufacturer: Linux 3.16.0-4-686-pae uhci_hcd
[    0.904836] usb usb5: SerialNumber: 0000:00:1a.2
[    0.904944] hub 5-0:1.0: USB hub found
[    0.904951] hub 5-0:1.0: 2 ports detected
[    0.905108] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.905114] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[    0.905119] uhci_hcd 0000:00:1d.0: detected 2 ports
[    0.905135] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080
[    0.905177] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    0.905179] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.905180] usb usb6: Product: UHCI Host Controller
[    0.905182] usb usb6: Manufacturer: Linux 3.16.0-4-686-pae uhci_hcd
[    0.905184] usb usb6: SerialNumber: 0000:00:1d.0
[    0.905288] hub 6-0:1.0: USB hub found
[    0.905295] hub 6-0:1.0: 2 ports detected
[    0.905450] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.905456] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[    0.905461] uhci_hcd 0000:00:1d.1: detected 2 ports
[    0.905477] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
[    0.905522] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    0.905524] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.905526] usb usb7: Product: UHCI Host Controller
[    0.905528] usb usb7: Manufacturer: Linux 3.16.0-4-686-pae uhci_hcd
[    0.905529] usb usb7: SerialNumber: 0000:00:1d.1
[    0.905640] hub 7-0:1.0: USB hub found
[    0.905646] hub 7-0:1.0: 2 ports detected
[    0.905802] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.905807] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[    0.905812] uhci_hcd 0000:00:1d.2: detected 2 ports
[    0.905828] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480
[    0.905872] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[    0.905874] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.905876] usb usb8: Product: UHCI Host Controller
[    0.905877] usb usb8: Manufacturer: Linux 3.16.0-4-686-pae uhci_hcd
[    0.905879] usb usb8: SerialNumber: 0000:00:1d.2
[    0.905985] hub 8-0:1.0: USB hub found
[    0.905992] hub 8-0:1.0: 2 ports detected
[    0.907676] ata_piix 0000:00:1f.2: version 2.13
[    0.907740] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
[    0.909260] scsi4 : ata_piix
[    0.909340] scsi5 : ata_piix
[    0.909394] ata5: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 22
[    0.909397] ata6: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 22
[    0.909466] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[    0.910720] scsi6 : ata_piix
[    0.910799] scsi7 : ata_piix
[    0.910853] ata7: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 22
[    0.910855] ata8: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 22
[    0.920094] firewire_ohci 0000:05:02.2: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[    0.984038] firewire_ohci 0000:05:03.0: added OHCI v1.10 device as card 1, 4 IR + 8 IT contexts, quirks 0x11
[    1.056985] ata3.01: ATA-7: WDC WD2500JB-00REA0, 20.00K20, max UDMA/100
[    1.056989] ata3.01: 488397168 sectors, multi 0: LBA48 
[    1.064663] ata3.01: configured for UDMA/100
[    1.176023] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.188029] ata1: SATA link down (SStatus 0 SControl 300)
[    1.192035] ata2: SATA link down (SStatus 0 SControl 300)
[    1.192155] scsi 2:0:1:0: Direct-Access     ATA      WDC WD2500JB-00R 0K20 PQ: 0 ANSI: 5
[    1.310144] usb 2-1: New USB device found, idVendor=048d, idProduct=9135
[    1.310147] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.384052] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.384056] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.384152] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.392119] ata6.00: ATAPI: HL-DT-ST DVDRAM GH24NSB0, LM00, max UDMA/133
[    1.392361] ata8.00: ATA-9: WDC WD10EZEX-08Y20A0, 02.01A02, max UDMA/100
[    1.392363] ata8.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.400252] ata8.00: configured for UDMA/100
[    1.408232] ata6.00: configured for UDMA/133
[    1.410087] ata5.00: ATA-8: KINGSTON SH103S3120G, 521ABBF0, max UDMA/133
[    1.410090] ata5.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.420021] usb 2-4: new high-speed USB device number 3 using ehci-pci
[    1.420084] firewire_core 0000:05:02.2: created device fw0: GUID 00023c00300550f7, S400
[    1.440014] tsc: Refined TSC clocksource calibration: 2671.603 MHz
[    1.441926] ata5.00: configured for UDMA/133
[    1.442013] scsi 4:0:0:0: Direct-Access     ATA      KINGSTON SH103S3 BBF0 PQ: 0 ANSI: 5
[    1.443187] scsi 5:0:0:0: CD-ROM            HL-DT-ST DVDRAM GH24NSB0  LM00 PQ: 0 ANSI: 5
[    1.443205] sd 4:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[    1.443243] sd 2:0:1:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    1.443283] sd 2:0:1:0: [sda] Write Protect is off
[    1.443286] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
[    1.443318] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.443398] sd 4:0:0:0: [sdb] Write Protect is off
[    1.443401] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.443419] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.444427]  sdb: sdb1 sdb2 sdb3 < sdb5 sdb6 sdb7 sdb8 >
[    1.444927] sd 4:0:0:0: [sdb] Attached SCSI disk
[    1.448470]  sda: sda1
[    1.448773] sd 2:0:1:0: [sda] Attached SCSI disk
[    1.458896] sr0: scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.458899] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.459040] sr 5:0:0:0: Attached scsi CD-ROM sr0
[    1.459533] sd 2:0:1:0: Attached scsi generic sg0 type 0
[    1.459569] sd 4:0:0:0: Attached scsi generic sg1 type 0
[    1.459603] sr 5:0:0:0: Attached scsi generic sg2 type 5
[    1.484125] firewire_core 0000:05:03.0: created device fw1: GUID 001e8c0000117773, S400
[    1.553892] usb 2-4: New USB device found, idVendor=19d2, idProduct=0031
[    1.553896] usb 2-4: New USB device strings: Mfr=3, Product=2, SerialNumber=4
[    1.553899] usb 2-4: Product: ZTE WCDMA Technologies MSM
[    1.553901] usb 2-4: Manufacturer: ZTE,Incorporated
[    1.553903] usb 2-4: SerialNumber: MF6310ZTED010000
[    1.557400] usb-storage 2-4:1.2: USB Mass Storage device detected
[    1.557512] scsi8 : usb-storage 2-4:1.2
[    1.557603] usbcore: registered new interface driver usb-storage
[    1.724024] usb 3-4: new high-speed USB device number 2 using ehci-pci
[    1.904299] usb 3-4: New USB device found, idVendor=0424, idProduct=2228
[    1.904303] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.904305] usb 3-4: Product: Flash Card Reader
[    1.904307] usb 3-4: Manufacturer: Generic
[    1.904309] usb 3-4: SerialNumber: 000022272228
[    1.904595] usb-storage 3-4:1.0: USB Mass Storage device detected
[    1.904664] scsi9 : usb-storage 3-4:1.0
[    2.144021] usb 5-2: new low-speed USB device number 2 using uhci_hcd
[    2.317820] usb 5-2: New USB device found, idVendor=09da, idProduct=000e
[    2.317823] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.317826] usb 5-2: Product: PS/2+USB Mouse
[    2.317828] usb 5-2: Manufacturer: A4Tech
[    2.331709] hidraw: raw HID events driver (C) Jiri Kosina
[    2.346188] usbcore: registered new interface driver usbhid
[    2.346189] usbhid: USB HID core driver
[    2.346909] input: A4Tech PS/2+USB Mouse as /devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2:1.0/0003:09DA:000E.0001/input/input1
[    2.347029] hid-generic 0003:09DA:000E.0001: input,hidraw0: USB HID v1.10 Mouse [A4Tech PS/2+USB Mouse] on usb-0000:00:1a.2-2/input0
[    2.440048] Switched to clocksource tsc
[    2.556911] scsi 8:0:0:0: Direct-Access     ZTE      MMC Storage      2.31 PQ: 0 ANSI: 2
[    2.557156] sd 8:0:0:0: Attached scsi generic sg3 type 0
[    2.558772] sd 8:0:0:0: [sdc] Attached SCSI removable disk
[    2.913940] scsi 9:0:0:0: Direct-Access     Generic  Flash HS-CF      3.95 PQ: 0 ANSI: 0
[    2.917562] scsi 9:0:0:1: Direct-Access     Generic  Flash HS-MS      3.95 PQ: 0 ANSI: 0
[    2.921189] scsi 9:0:0:2: Direct-Access     Generic  Flash HS-SM      3.95 PQ: 0 ANSI: 0
[    2.924813] scsi 9:0:0:3: Direct-Access     Generic  Flash HS-SD/MMC  3.95 PQ: 0 ANSI: 0
[    2.925033] sd 9:0:0:0: Attached scsi generic sg4 type 0
[    2.925201] sd 9:0:0:1: Attached scsi generic sg5 type 0
[    2.925381] sd 9:0:0:2: Attached scsi generic sg6 type 0
[    2.925663] sd 9:0:0:3: Attached scsi generic sg7 type 0
[    3.212425] sd 9:0:0:1: [sde] Attached SCSI removable disk
[    3.217424] sd 9:0:0:2: [sdf] Attached SCSI removable disk
[    3.225675] sd 9:0:0:0: [sdd] Attached SCSI removable disk
[    3.229674] sd 9:0:0:3: [sdg] Attached SCSI removable disk
[    3.876023] floppy0: no floppy controllers found
[    5.920041] ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    5.928789] ata7.00: ATA-8: WDC WD5000AAKB-00H8A0, 05.04E05, max UDMA/133
[    5.928792] ata7.00: 976773168 sectors, multi 16: LBA48 
[    5.944813] ata7.00: configured for UDMA/133
[    5.944893] scsi 6:0:0:0: Direct-Access     ATA      WDC WD5000AAKB-0 4E05 PQ: 0 ANSI: 5
[    5.945094] sd 6:0:0:0: [sdh] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    5.945102] sd 6:0:0:0: Attached scsi generic sg8 type 0
[    5.945130] sd 6:0:0:0: [sdh] Write Protect is off
[    5.945132] sd 6:0:0:0: [sdh] Mode Sense: 00 3a 00 00
[    5.945148] sd 6:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.945231] scsi 7:0:0:0: Direct-Access     ATA      WDC WD10EZEX-08Y 1A02 PQ: 0 ANSI: 5
[    5.945489] sd 7:0:0:0: Attached scsi generic sg9 type 0
[    5.945520] sd 7:0:0:0: [sdi] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    5.945522] sd 7:0:0:0: [sdi] 4096-byte physical blocks
[    5.945590] sd 7:0:0:0: [sdi] Write Protect is off
[    5.945592] sd 7:0:0:0: [sdi] Mode Sense: 00 3a 00 00
[    5.945613] sd 7:0:0:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.969881]  sdh: sdh2 < sdh5 >
[    5.970144] sd 6:0:0:0: [sdh] Attached SCSI disk
[    5.974957]  sdi: sdi1
[    5.975164] sd 7:0:0:0: [sdi] Attached SCSI disk
[    6.167987] PM: Starting manual resume from disk
[    6.167992] PM: Hibernation image partition 8:24 present
[    6.167993] PM: Looking for hibernation image.
[    6.169782] PM: Image not found (code -22)
[    6.169784] PM: Hibernation image not present or could not be loaded.
[    6.203902] EXT4-fs (sdb6): mounted filesystem with ordered data mode. Opts: (null)
[    6.377642] random: nonblocking pool is initialized
[    6.400733] lp: driver loaded but no devices found
[    6.403403] ppdev: user-space parallel port driver
[    6.408948] fuse init (API version 7.23)
[    6.429905] systemd-udevd[201]: starting version 215
[    6.515856] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[    6.515861] ACPI: Power Button [PWRB]
[    6.515928] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    6.515931] ACPI: Power Button [PWRF]
[    6.540933] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    6.562274] snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
[    6.562544] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[    6.562604] snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X
[    6.567191] [drm] Initialized drm 1.1.0 20060810
[    6.597515] [drm] radeon kernel modesetting enabled.
[    6.605093] [drm] initializing kernel modesetting (RV730 0x1002:0x9490 0x174B:0xE880).
[    6.605107] [drm] register mmio base: 0xFE8E0000
[    6.605108] [drm] register mmio size: 65536
[    6.605235] ATOM BIOS: 
[    6.605266] radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[    6.605269] radeon 0000:01:00.0: GTT: 1024M 0x0000000020000000 - 0x000000005FFFFFFF
[    6.605271] [drm] Detected VRAM RAM=512M, BAR=256M
[    6.605272] [drm] RAM width 128bits DDR
[    6.606167] gameport gameport0: EMU10K1 is pci0000:05:02.1/gameport0, io 0xec00, speed 1065kHz
[    6.616190] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input4
[    6.623067] sound hdaudioC0D0: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[    6.623123] sound hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    6.623125] sound hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    6.623127] sound hdaudioC0D0:    mono: mono_out=0x0
[    6.623128] sound hdaudioC0D0:    dig-out=0x1e/0x0
[    6.623130] sound hdaudioC0D0:    inputs:
[    6.623132] sound hdaudioC0D0:      Front Mic=0x19
[    6.623134] sound hdaudioC0D0:      Rear Mic=0x18
[    6.623136] sound hdaudioC0D0:      Line=0x1a
[    6.634482] usbcore: registered new interface driver usbserial
[    6.634499] usbcore: registered new interface driver usbserial_generic
[    6.634510] usbserial: USB Serial support registered for generic
[    6.638692] usbcore: registered new interface driver option
[    6.638708] usbserial: USB Serial support registered for GSM modem (1-port)
[    6.638806] option 2-4:1.0: GSM modem (1-port) converter detected
[    6.638885] usb 2-4: GSM modem (1-port) converter now attached to ttyUSB0
[    6.638921] option 2-4:1.1: GSM modem (1-port) converter detected
[    6.638982] usb 2-4: GSM modem (1-port) converter now attached to ttyUSB1
[    6.639020] option 2-4:1.3: GSM modem (1-port) converter detected
[    6.639079] usb 2-4: GSM modem (1-port) converter now attached to ttyUSB2
[    6.658112] [TTM] Zone  kernel: Available graphics memory: 429838 kiB
[    6.658115] [TTM] Zone highmem: Available graphics memory: 2073106 kiB
[    6.658116] [TTM] Initializing pool allocator
[    6.658124] [TTM] Initializing DMA pool allocator
[    6.658147] [drm] radeon: 512M of VRAM memory ready
[    6.658148] [drm] radeon: 1024M of GTT memory ready.
[    6.658165] [drm] Loading RV730 Microcode
[    6.660506] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/RV730_pfp.bin
[    6.661297] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/RV730_me.bin
[    6.662924] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/R700_rlc.bin
[    6.663421] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/RV730_smc.bin
[    6.663427] [drm] Internal thermal controller with fan control
[    6.664610] [drm] radeon: dpm initialized
[    6.665471] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/RV710_uvd.bin
[    6.665501] [drm] GART: num cpu pages 262144, num gpu pages 262144
[    6.692637] [drm] PCIE GART of 1024M enabled (table at 0x000000000025D000).
[    6.692691] radeon 0000:01:00.0: WB enabled
[    6.692695] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xff68dc00
[    6.692697] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xff68dc0c
[    6.693510] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c598 and cpu addr 0xf861c598
[    6.693512] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    6.693513] [drm] Driver supports precise vblank timestamp query.
[    6.693515] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[    6.693535] radeon 0000:01:00.0: irq 46 for MSI/MSI-X
[    6.693547] radeon 0000:01:00.0: radeon: using MSI.
[    6.693571] [drm] radeon: irq initialized.
[    6.734025] ACPI Warning: SystemIO range 0x00000400-0x0000041f conflicts with OpRegion 0x00000400-0x0000040f (\SMRG) (20140424/utaddress-258)
[    6.734032] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    6.752795] [drm] ring test on 0 succeeded in 0 usecs
[    6.752804] [drm] ring test on 3 succeeded in 2 usecs
[    6.768641] input: PC Speaker as /devices/platform/pcspkr/input/input6
[    6.785353] Adding 4113404k swap on /dev/sdb8.  Priority:-1 extents:1 across:4113404k SSFS
[    6.792207] EXT4-fs (sdb6): re-mounted. Opts: errors=remount-ro
[    6.815915] EXT4-fs (sdb5): mounting ext2 file system using the ext4 subsystem
[    6.828325] EXT4-fs (sdb5): mounted filesystem without journal. Opts: (null)
[    6.839168] EXT4-fs (sdb7): mounted filesystem with ordered data mode. Opts: (null)
[    6.862397] systemd-journald[189]: Received request to flush runtime journal from PID 1
[    6.866635] iTCO_vendor_support: vendor-support=0
[    6.867057] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    6.867094] iTCO_wdt: Found a ICH9 TCO device (Version=2, TCOBASE=0x0860)
[    6.867186] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    6.948217] [drm] ring test on 5 succeeded in 1 usecs
[    6.948222] [drm] UVD initialized successfully.
[    6.949071] [drm] ib test on ring 0 succeeded in 0 usecs
[    6.949091] [drm] ib test on ring 3 succeeded in 0 usecs
[    7.108535] [drm] ib test on ring 5 succeeded
[    7.108830] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input5
[    7.113673] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[    7.113930] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[    7.114082] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    7.114232] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    7.114385] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[    7.115856] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[    7.116026] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[    7.118568] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[    7.130363] [drm] Radeon Display Connectors
[    7.130366] [drm] Connector 0:
[    7.130367] [drm]   DVI-I-1
[    7.130368] [drm]   HPD2
[    7.130370] [drm]   DDC: 0x7f10 0x7f10 0x7f14 0x7f14 0x7f18 0x7f18 0x7f1c 0x7f1c
[    7.130371] [drm]   Encoders:
[    7.130372] [drm]     CRT2: INTERNAL_KLDSCP_DAC2
[    7.130374] [drm]     DFP2: INTERNAL_UNIPHY1
[    7.130375] [drm] Connector 1:
[    7.130376] [drm]   DIN-1
[    7.130377] [drm]   Encoders:
[    7.130378] [drm]     TV1: INTERNAL_KLDSCP_DAC2
[    7.130379] [drm] Connector 2:
[    7.130380] [drm]   DVI-I-2
[    7.130381] [drm]   HPD1
[    7.130382] [drm]   DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c
[    7.130383] [drm]   Encoders:
[    7.130384] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[    7.130385] [drm]     DFP1: INTERNAL_UNIPHY
[    7.187783] RPC: Registered named UNIX socket transport module.
[    7.187787] RPC: Registered udp transport module.
[    7.187788] RPC: Registered tcp transport module.
[    7.187790] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    7.191229] FS-Cache: Loaded
[    7.197497] FS-Cache: Netfs 'nfs' registered for caching
[    7.204357] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    7.210380] [drm] fb mappable at 0xD045E000
[    7.210382] [drm] vram apper at 0xD0000000
[    7.210384] [drm] size 7299072
[    7.210385] [drm] fb depth is 24
[    7.210386] [drm]    pitch is 6912
[    7.210489] fbcon: radeondrmfb (fb0) is primary device
[    7.249392] Console: switching to colour frame buffer device 160x64
[    7.254881] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[    7.254884] radeon 0000:01:00.0: registered panic notifier
[    7.274228] [drm] Initialized radeon 2.39.0 20080528 for 0000:01:00.0 on minor 0
[    7.481293] cfg80211: Calling CRDA to update world regulatory domain
[    7.630009] cfg80211: World regulatory domain updated:
[    7.630014] cfg80211:  DFS Master region: unset
[    7.630016] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[    7.630019] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    7.630021] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    7.630023] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[    7.630026] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[    7.630029] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[    7.630031] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[    7.630033] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[    7.630035] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[    7.689770] usb 2-1: dvb_usb_af9035: prechip_version=83 chip_version=02 chip_type=9135
[    7.690465] usb 2-1: dvb_usb_v2: found a 'ITE 9135 Generic' in warm state
[    7.691881] usb 2-1: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[    7.691912] DVB: registering new adapter (ITE 9135 Generic)
[    7.715149] i2c i2c-7: af9033: firmware version: LINK=0.0.0.0 OFDM=3.17.1.0
[    7.715157] usb 2-1: DVB: registering adapter 0 frontend 0 (Afatech AF9033 (DVB-T))...
[    7.718771] i2c i2c-7: tuner_it913x: ITE Tech IT913X successfully attached
[    7.784021] Registered IR keymap rc-it913x-v1
[    7.784121] input: ITE 9135 Generic as /devices/pci0000:00/0000:00:1a.7/usb2/2-1/rc/rc0/input15
[    7.784792] rc0: ITE 9135 Generic as /devices/pci0000:00/0000:00:1a.7/usb2/2-1/rc/rc0
[    7.784796] usb 2-1: dvb_usb_v2: schedule remote query interval to 500 msecs
[    7.784799] usb 2-1: dvb_usb_v2: 'ITE 9135 Generic' successfully initialized and connected
[    7.784827] usbcore: registered new interface driver dvb_usb_af9035
[    7.821284] atl1 0000:02:00.0: irq 47 for MSI/MSI-X
[    7.821468] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    9.548024] floppy0: no floppy controllers found
[   36.367339] PPP generic driver version 2.4.2
[   36.399170] PPP BSD Compression module registered
[   36.400957] PPP Deflate Compression module registered

Offline

 

#6  2015-11-19 20:27:08

  patria - Użytkownik

patria
Użytkownik
Zarejestrowany: 2013-05-28

Re: Dekoder DVB-T Omega t900 nie zawsze "widoczny"

dmesg przy nie działającym tunerze:

Kod:

dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.16.0-4-686-pae (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt11-1+deb8u6 (2015-11-09)
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cff7ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cff80000-0x00000000cff8dfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000cff8e000-0x00000000cffdffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000cffe0000-0x00000000cfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000012fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI: System manufacturer P5K/P5K, BIOS 1201    10/14/2008
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x130000 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-DFFFF write-protect
[    0.000000]   E0000-EFFFF write-through
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0D0000000 mask FF0000000 uncachable
[    0.000000]   1 base 0E0000000 mask FE0000000 uncachable
[    0.000000]   2 base 000000000 mask F00000000 write-back
[    0.000000]   3 base 100000000 mask FE0000000 write-back
[    0.000000]   4 base 120000000 mask FF0000000 write-back
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
[    0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [c00ff780]
[    0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x37200000-0x373fffff]
[    0.000000]  [mem 0x37200000-0x373fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x34000000-0x371fffff]
[    0.000000]  [mem 0x34000000-0x371fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x33ffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x33ffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x37400000-0x375fdfff]
[    0.000000]  [mem 0x37400000-0x375fdfff] page 4k
[    0.000000] BRK [0x01798000, 0x01798fff] PGTABLE
[    0.000000] BRK [0x01799000, 0x0179afff] PGTABLE
[    0.000000] BRK [0x0179b000, 0x0179bfff] PGTABLE
[    0.000000] BRK [0x0179c000, 0x0179cfff] PGTABLE
[    0.000000] RAMDISK: [mem 0x362a4000-0x37149fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x000FBCD0 000014 (v00 ACPIAM)
[    0.000000] ACPI: RSDT 0xCFF80000 00003C (v01 A_M_I_ OEMRSDT  10000814 MSFT 00000097)
[    0.000000] ACPI: FACP 0xCFF80200 000084 (v02 A_M_I_ OEMFACP  10000814 MSFT 00000097)
[    0.000000] ACPI: DSDT 0xCFF80440 0090AA (v01 A0751  A0751077 00000077 INTL 20060113)
[    0.000000] ACPI: FACS 0xCFF8E000 000040
[    0.000000] ACPI: APIC 0xCFF80390 00006C (v01 A_M_I_ OEMAPIC  10000814 MSFT 00000097)
[    0.000000] ACPI: MCFG 0xCFF80400 00003C (v01 A_M_I_ OEMMCFG  10000814 MSFT 00000097)
[    0.000000] ACPI: OEMB 0xCFF8E040 000081 (v01 A_M_I_ AMI_OEM  10000814 MSFT 00000097)
[    0.000000] ACPI: HPET 0xCFF894F0 000038 (v01 A_M_I_ OEMHPET  10000814 MSFT 00000097)
[    0.000000] ACPI: OSFR 0xCFF89530 0000B0 (v01 A_M_I_ OEMOSFR  10000814 MSFT 00000097)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 3978MB HIGHMEM available.
[    0.000000] 885MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 375fe000
[    0.000000]   low ram: 0 - 375fe000
[    0.000000] BRK [0x0179d000, 0x0179dfff] PGTABLE
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   Normal   [mem 0x01000000-0x375fdfff]
[    0.000000]   HighMem  [mem 0x375fe000-0x2fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0xcff7ffff]
[    0.000000]   node   0: [mem 0x00000000-0x2fffffff]
[    0.000000] On node 0 totalpages: 1048350
[    0.000000] free_area_init_node: node 0, pgdat c1658ec0, node_mem_map f3ca4020
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   Normal zone: 1740 pages used for memmap
[    0.000000]   Normal zone: 222718 pages, LIFO batch:31
[    0.000000]   HighMem zone: 7957 pages used for memmap
[    0.000000]   HighMem zone: 821634 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
[    0.000000] e820: [mem 0xd0000000-0xfedfffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @f75b4000 s34752 r0 d22592 u57344
[    0.000000] pcpu-alloc: s34752 r0 d22592 u57344 alloc=14*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1046578
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.16.0-4-686-pae root=UUID=8e593d33-3055-4d60-9c09-df554c17fc67 ro quiet
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] CPU0 microcode updated early to revision 0x60f, date = 2010-09-29
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (000375fe:00130000)
[    0.000000] Initializing Movable for node 0 (00000000:00000000)
[    0.000000] Memory: 4130536K/4193400K available (4599K kernel code, 518K rwdata, 1448K rodata, 656K init, 460K bss, 62864K reserved, 3286536K highmem)
[    0.000000] virtual kernel memory layout:
    fixmap  : 0xffd36000 - 0xfffff000   (2852 kB)
    pkmap   : 0xff600000 - 0xff800000   (2048 kB)
    vmalloc : 0xf7dfe000 - 0xff5fe000   ( 120 MB)
    lowmem  : 0xc0000000 - 0xf75fe000   ( 885 MB)
      .init : 0xc166d000 - 0xc1711000   ( 656 kB)
      .data : 0xc147e340 - 0xc166b880   (1973 kB)
      .text : 0xc1000000 - 0xc147e340   (4600 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] Hierarchical RCU implementation.
[    0.000000]     RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000]     RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS:2304 nr_irqs:712 16
[    0.000000] CPU 0 irqstacks, hard=f3806000 soft=f3808000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2671.495 MHz processor
[    0.004010] Calibrating delay loop (skipped), value calculated using timer frequency.. 5342.99 BogoMIPS (lpj=10685980)
[    0.004014] pid_max: default: 32768 minimum: 301
[    0.004022] ACPI: Core revision 20140424
[    0.013846] ACPI: All ACPI Tables successfully acquired
[    0.016027] Security Framework initialized
[    0.016042] AppArmor: AppArmor disabled by boot time parameter
[    0.016044] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.016061] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.016063] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.016308] Initializing cgroup subsys memory
[    0.016314] Initializing cgroup subsys devices
[    0.016321] Initializing cgroup subsys freezer
[    0.016324] Initializing cgroup subsys net_cls
[    0.016329] Initializing cgroup subsys blkio
[    0.016333] Initializing cgroup subsys perf_event
[    0.016336] Initializing cgroup subsys net_prio
[    0.016359] CPU: Physical Processor ID: 0
[    0.016361] CPU: Processor Core ID: 0
[    0.016366] mce: CPU supports 6 MCE banks
[    0.016374] CPU0: Thermal monitoring enabled (TM2)
[    0.016377] process: using mwait in idle threads
[    0.016384] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
tlb_flushall_shift: -1
[    0.016512] Freeing SMP alternatives memory: 20K (c1711000 - c1716000)
[    0.020131] ftrace: allocating 20756 entries in 41 pages
[    0.024051] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.024385] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.064964] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU     E8200  @ 2.66GHz (fam: 06, model: 17, stepping: 06)
[    0.068000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[    0.068000] ... version:                2
[    0.068000] ... bit width:              40
[    0.068000] ... generic registers:      2
[    0.068000] ... value mask:             000000ffffffffff
[    0.068000] ... max period:             000000007fffffff
[    0.068000] ... fixed-purpose events:   3
[    0.068000] ... event mask:             0000000700000003
[    0.068000] CPU 1 irqstacks, hard=f3946000 soft=f3948000
[    0.068000] x86: Booting SMP configuration:
[    0.068000] .... node  #0, CPUs:      #1
[    0.008000] Initializing CPU#1
[    0.079038] x86: Booted up 1 node, 2 CPUs
[    0.079043] smpboot: Total of 2 processors activated (10685.98 BogoMIPS)
[    0.079133] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.080107] devtmpfs: initialized
[    0.080259] PM: Registering ACPI NVS region [mem 0xcff8e000-0xcffdffff] (335872 bytes)
[    0.080388] pinctrl core: initialized pinctrl subsystem
[    0.080465] NET: Registered protocol family 16
[    0.080573] cpuidle: using governor ladder
[    0.080576] cpuidle: using governor menu
[    0.080623] ACPI: bus type PCI registered
[    0.080626] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.080705] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.080707] PCI: not using MMCONFIG
[    0.080822] PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX.
[    0.080872] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
[    0.080873] PCI: Using configuration type 1 for base access
[    0.092077] ACPI: Added _OSI(Module Device)
[    0.092077] ACPI: Added _OSI(Processor Device)
[    0.092077] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.092077] ACPI: Added _OSI(Processor Aggregator Device)
[    0.097166] ACPI: Executed 1 blocks of module-level executable AML code
[    0.101917] ACPI: Dynamic OEM Table Load:
[    0.101922] ACPI: SSDT 0xF3A06A00 0001D2 (v01 AMI    CPU1PM   00000001 INTL 20060113)
[    0.102320] ACPI: Dynamic OEM Table Load:
[    0.102324] ACPI: SSDT 0xF3A06800 000143 (v01 AMI    CPU2PM   00000001 INTL 20060113)
[    0.102696] ACPI: Interpreter enabled
[    0.102713] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[    0.102725] ACPI: (supports S0 S1 S3 S4 S5)
[    0.102727] ACPI: Using IOAPIC for interrupt routing
[    0.102746] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.103212] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.103213] PCI: Using MMCONFIG for extended config space
[    0.103227] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.109471] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.109477] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.109482] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.109732] PCI host bridge to bus 0000:00
[    0.109735] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.109737] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.109739] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.109741] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.109743] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
[    0.109745] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xffffffff]
[    0.109753] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
[    0.109846] pci 0000:00:01.0: [8086:29c1] type 01 class 0x060400
[    0.109881] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.109919] pci 0000:00:01.0: System wakeup disabled by ACPI
[    0.109984] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[    0.110020] pci 0000:00:1a.0: reg 0x20: [io  0xb800-0xb81f]
[    0.110101] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.110147] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[    0.110185] pci 0000:00:1a.1: reg 0x20: [io  0xb880-0xb89f]
[    0.110264] pci 0000:00:1a.1: System wakeup disabled by ACPI
[    0.110311] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
[    0.110346] pci 0000:00:1a.2: reg 0x20: [io  0xbc00-0xbc1f]
[    0.110426] pci 0000:00:1a.2: System wakeup disabled by ACPI
[    0.110479] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[    0.110497] pci 0000:00:1a.7: reg 0x10: [mem 0xfe7ffc00-0xfe7fffff]
[    0.110574] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.110616] pci 0000:00:1a.7: System wakeup disabled by ACPI
[    0.110667] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[    0.110682] pci 0000:00:1b.0: reg 0x10: [mem 0xfe7f8000-0xfe7fbfff 64bit]
[    0.110743] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.110824] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[    0.110887] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.110930] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.110978] pci 0000:00:1c.4: [8086:2948] type 01 class 0x060400
[    0.111041] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.111084] pci 0000:00:1c.4: System wakeup disabled by ACPI
[    0.111128] pci 0000:00:1c.5: [8086:294a] type 01 class 0x060400
[    0.111191] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.111235] pci 0000:00:1c.5: System wakeup disabled by ACPI
[    0.111282] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[    0.111318] pci 0000:00:1d.0: reg 0x20: [io  0xb080-0xb09f]
[    0.111397] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.111443] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[    0.111479] pci 0000:00:1d.1: reg 0x20: [io  0xb400-0xb41f]
[    0.111557] pci 0000:00:1d.1: System wakeup disabled by ACPI
[    0.111605] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[    0.111641] pci 0000:00:1d.2: reg 0x20: [io  0xb480-0xb49f]
[    0.111719] pci 0000:00:1d.2: System wakeup disabled by ACPI
[    0.111774] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[    0.111792] pci 0000:00:1d.7: reg 0x10: [mem 0xfe7ff800-0xfe7ffbff]
[    0.111869] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.111911] pci 0000:00:1d.7: System wakeup disabled by ACPI
[    0.111957] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[    0.112037] pci 0000:00:1e.0: System wakeup disabled by ACPI
[    0.112086] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100
[    0.112154] pci 0000:00:1f.0: can't claim BAR 13 [io  0x0800-0x087f]: address conflict with ACPI CPU throttle [io  0x0810-0x0815]
[    0.112159] pci 0000:00:1f.0: quirk: [io  0x0480-0x04bf] claimed by ICH6 GPIO
[    0.112162] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
[    0.112262] pci 0000:00:1f.2: [8086:2921] type 00 class 0x01018f
[    0.112275] pci 0000:00:1f.2: reg 0x10: [io  0xa000-0xa007]
[    0.112282] pci 0000:00:1f.2: reg 0x14: [io  0x9c00-0x9c03]
[    0.112288] pci 0000:00:1f.2: reg 0x18: [io  0x9880-0x9887]
[    0.112295] pci 0000:00:1f.2: reg 0x1c: [io  0x9800-0x9803]
[    0.112302] pci 0000:00:1f.2: reg 0x20: [io  0x9480-0x948f]
[    0.112308] pci 0000:00:1f.2: reg 0x24: [io  0x9400-0x940f]
[    0.112404] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[    0.112417] pci 0000:00:1f.3: reg 0x10: [mem 0xfe7ff400-0xfe7ff4ff 64bit]
[    0.112434] pci 0000:00:1f.3: reg 0x20: [io  0x0400-0x041f]
[    0.112519] pci 0000:00:1f.5: [8086:2926] type 00 class 0x010185
[    0.112532] pci 0000:00:1f.5: reg 0x10: [io  0xb000-0xb007]
[    0.112539] pci 0000:00:1f.5: reg 0x14: [io  0xac00-0xac03]
[    0.112546] pci 0000:00:1f.5: reg 0x18: [io  0xa880-0xa887]
[    0.112552] pci 0000:00:1f.5: reg 0x1c: [io  0xa800-0xa803]
[    0.112559] pci 0000:00:1f.5: reg 0x20: [io  0xa480-0xa48f]
[    0.112565] pci 0000:00:1f.5: reg 0x24: [io  0xa400-0xa40f]
[    0.112705] pci 0000:01:00.0: [1002:9490] type 00 class 0x030000
[    0.112718] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.112728] pci 0000:01:00.0: reg 0x18: [mem 0xfe8e0000-0xfe8effff 64bit]
[    0.112734] pci 0000:01:00.0: reg 0x20: [io  0xc000-0xc0ff]
[    0.112745] pci 0000:01:00.0: reg 0x30: [mem 0xfe8c0000-0xfe8dffff pref]
[    0.112773] pci 0000:01:00.0: supports D1 D2
[    0.112822] pci 0000:01:00.1: [1002:aa38] type 00 class 0x040300
[    0.112834] pci 0000:01:00.1: reg 0x10: [mem 0xfe8fc000-0xfe8fffff 64bit]
[    0.112885] pci 0000:01:00.1: supports D1 D2
[    0.112941] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.112944] pci 0000:00:01.0:   bridge window [io  0xc000-0xcfff]
[    0.112947] pci 0000:00:01.0:   bridge window [mem 0xfe800000-0xfe8fffff]
[    0.112950] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.113001] pci 0000:00:1c.0: PCI bridge to [bus 04]
[    0.113009] pci 0000:00:1c.0:   bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[    0.113091] pci 0000:03:00.0: [197b:2363] type 00 class 0x010185
[    0.113174] pci 0000:03:00.0: reg 0x24: [mem 0xfeafe000-0xfeafffff]
[    0.113186] pci 0000:03:00.0: reg 0x30: [mem 0xfeae0000-0xfeaeffff pref]
[    0.113237] pci 0000:03:00.0: PME# supported from D3hot
[    0.113311] pci 0000:03:00.1: [197b:2363] type 00 class 0x010185
[    0.113330] pci 0000:03:00.1: reg 0x10: [io  0xdc00-0xdc07]
[    0.113340] pci 0000:03:00.1: reg 0x14: [io  0xd880-0xd883]
[    0.113349] pci 0000:03:00.1: reg 0x18: [io  0xd800-0xd807]
[    0.113358] pci 0000:03:00.1: reg 0x1c: [io  0xd480-0xd483]
[    0.113368] pci 0000:03:00.1: reg 0x20: [io  0xd400-0xd40f]
[    0.113475] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.113484] pci 0000:00:1c.4: PCI bridge to [bus 03]
[    0.113487] pci 0000:00:1c.4:   bridge window [io  0xd000-0xdfff]
[    0.113490] pci 0000:00:1c.4:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.113560] pci 0000:02:00.0: [1969:1048] type 00 class 0x020000
[    0.113584] pci 0000:02:00.0: reg 0x10: [mem 0xfe9c0000-0xfe9fffff 64bit]
[    0.113631] pci 0000:02:00.0: reg 0x30: [mem 0xfe9a0000-0xfe9bffff pref]
[    0.113683] pci 0000:02:00.0: PME# supported from D3hot D3cold
[    0.113738] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.113746] pci 0000:00:1c.5: PCI bridge to [bus 02]
[    0.113751] pci 0000:00:1c.5:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.113801] pci 0000:05:02.0: [1102:0004] type 00 class 0x040100
[    0.113815] pci 0000:05:02.0: reg 0x10: [io  0xe880-0xe89f]
[    0.113879] pci 0000:05:02.0: supports D1 D2
[    0.113922] pci 0000:05:02.1: [1102:7003] type 00 class 0x098000
[    0.113936] pci 0000:05:02.1: reg 0x10: [io  0xec00-0xec07]
[    0.113999] pci 0000:05:02.1: supports D1 D2
[    0.114046] pci 0000:05:02.2: [1102:4001] type 00 class 0x0c0010
[    0.114061] pci 0000:05:02.2: reg 0x10: [mem 0xfebff800-0xfebfffff]
[    0.114070] pci 0000:05:02.2: reg 0x14: [mem 0xfebf8000-0xfebfbfff]
[    0.114130] pci 0000:05:02.2: supports D1 D2
[    0.114132] pci 0000:05:02.2: PME# supported from D0 D1 D2 D3hot
[    0.114192] pci 0000:05:03.0: [1106:3044] type 00 class 0x0c0010
[    0.114207] pci 0000:05:03.0: reg 0x10: [mem 0xfebff000-0xfebff7ff]
[    0.114216] pci 0000:05:03.0: reg 0x14: [io  0xe800-0xe87f]
[    0.114276] pci 0000:05:03.0: supports D2
[    0.114278] pci 0000:05:03.0: PME# supported from D2 D3hot D3cold
[    0.114352] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
[    0.114356] pci 0000:00:1e.0:   bridge window [io  0xe000-0xefff]
[    0.114359] pci 0000:00:1e.0:   bridge window [mem 0xfeb00000-0xfebfffff]
[    0.114364] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.114365] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.114367] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.114369] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[    0.114371] pci 0000:00:1e.0:   bridge window [mem 0xd0000000-0xffffffff] (subtractive decode)
[    0.114395] pci_bus 0000:00: on NUMA node 0
[    0.114940] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.114994] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.115045] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.115097] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[    0.115148] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.115200] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15)
[    0.115251] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[    0.115303] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[    0.115357] ACPI: Enabled 2 GPEs in block 00 to 3F
[    0.115428] vgaarb: setting as boot device: PCI:0000:01:00.0
[    0.115428] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.115428] vgaarb: loaded
[    0.115428] vgaarb: bridge control possible 0000:01:00.0
[    0.115428] PCI: Using ACPI for IRQ routing
[    0.115428] PCI: pci_cache_line_size set to 64 bytes
[    0.115428] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.115428] e820: reserve RAM buffer [mem 0xcff80000-0xcfffffff]
[    0.115428] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[    0.115428] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.115428] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[    0.120017] Switched to clocksource hpet
[    0.126379] pnp: PnP ACPI init
[    0.126393] ACPI: bus type PNP registered
[    0.126457] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
[    0.126461] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.126525] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.126687] system 00:02: [io  0x0290-0x0297] has been reserved
[    0.126690] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.126857] system 00:03: [io  0x04d0-0x04d1] has been reserved
[    0.126860] system 00:03: [io  0x0800-0x087f] could not be reserved
[    0.126862] system 00:03: [io  0x0480-0x04bf] has been reserved
[    0.126865] system 00:03: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.126867] system 00:03: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.126869] system 00:03: [mem 0xfed50000-0xfed8ffff] has been reserved
[    0.126872] system 00:03: [mem 0xffa00000-0xffafffff] has been reserved
[    0.126874] system 00:03: [mem 0xffb00000-0xffbfffff] has been reserved
[    0.126876] system 00:03: [mem 0xffe00000-0xffefffff] has been reserved
[    0.126878] system 00:03: [mem 0xfff00000-0xfffffffe] has been reserved
[    0.126881] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.127106] pnp 00:04: [dma 0 disabled]
[    0.127170] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.127252] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.127255] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.127257] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.127317] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.127386] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
[    0.127389] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.127573] system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.127576] system 00:08: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.127578] system 00:08: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.127580] system 00:08: [mem 0x00100000-0xcfffffff] could not be reserved
[    0.127583] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.127697] pnp: PnP ACPI: found 9 devices
[    0.127698] ACPI: bus type PNP unregistered
[    0.127703] PnPBIOS: Disabled by ACPI PNP
[    0.164332] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 04] add_size 1000
[    0.164336] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 400000
[    0.164344] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
[    0.164351] pci 0000:00:1c.5: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
[    0.164353] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[    0.164363] pci 0000:00:1f.0: BAR 13: [io  0x0800-0x087f] has bogus alignment
[    0.164366] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 400000
[    0.164368] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.164371] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.164373] pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[    0.164375] pci 0000:00:1c.5: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[    0.164380] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf0000000-0xf03fffff]
[    0.164386] pci 0000:00:1c.4: BAR 15: assigned [mem 0xf0400000-0xf05fffff 64bit pref]
[    0.164391] pci 0000:00:1c.5: BAR 15: assigned [mem 0xf0600000-0xf07fffff 64bit pref]
[    0.164394] pci 0000:00:1c.0: BAR 13: assigned [io  0x1000-0x1fff]
[    0.164397] pci 0000:00:1c.5: BAR 13: assigned [io  0x2000-0x2fff]
[    0.164399] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.164401] pci 0000:00:01.0:   bridge window [io  0xc000-0xcfff]
[    0.164404] pci 0000:00:01.0:   bridge window [mem 0xfe800000-0xfe8fffff]
[    0.164407] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.164410] pci 0000:00:1c.0: PCI bridge to [bus 04]
[    0.164413] pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
[    0.164417] pci 0000:00:1c.0:   bridge window [mem 0xf0000000-0xf03fffff]
[    0.164420] pci 0000:00:1c.0:   bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[    0.164425] pci 0000:00:1c.4: PCI bridge to [bus 03]
[    0.164427] pci 0000:00:1c.4:   bridge window [io  0xd000-0xdfff]
[    0.164431] pci 0000:00:1c.4:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.164434] pci 0000:00:1c.4:   bridge window [mem 0xf0400000-0xf05fffff 64bit pref]
[    0.164439] pci 0000:00:1c.5: PCI bridge to [bus 02]
[    0.164441] pci 0000:00:1c.5:   bridge window [io  0x2000-0x2fff]
[    0.164445] pci 0000:00:1c.5:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.164449] pci 0000:00:1c.5:   bridge window [mem 0xf0600000-0xf07fffff 64bit pref]
[    0.164454] pci 0000:00:1e.0: PCI bridge to [bus 05]
[    0.164456] pci 0000:00:1e.0:   bridge window [io  0xe000-0xefff]
[    0.164460] pci 0000:00:1e.0:   bridge window [mem 0xfeb00000-0xfebfffff]
[    0.164467] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.164468] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.164470] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.164472] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[    0.164474] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xffffffff]
[    0.164476] pci_bus 0000:01: resource 0 [io  0xc000-0xcfff]
[    0.164478] pci_bus 0000:01: resource 1 [mem 0xfe800000-0xfe8fffff]
[    0.164480] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.164482] pci_bus 0000:04: resource 0 [io  0x1000-0x1fff]
[    0.164484] pci_bus 0000:04: resource 1 [mem 0xf0000000-0xf03fffff]
[    0.164486] pci_bus 0000:04: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[    0.164488] pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
[    0.164489] pci_bus 0000:03: resource 1 [mem 0xfea00000-0xfeafffff]
[    0.164491] pci_bus 0000:03: resource 2 [mem 0xf0400000-0xf05fffff 64bit pref]
[    0.164493] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    0.164495] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff]
[    0.164497] pci_bus 0000:02: resource 2 [mem 0xf0600000-0xf07fffff 64bit pref]
[    0.164499] pci_bus 0000:05: resource 0 [io  0xe000-0xefff]
[    0.164501] pci_bus 0000:05: resource 1 [mem 0xfeb00000-0xfebfffff]
[    0.164502] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7]
[    0.164504] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff]
[    0.164506] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[    0.164508] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff]
[    0.164509] pci_bus 0000:05: resource 8 [mem 0xd0000000-0xffffffff]
[    0.164546] NET: Registered protocol family 2
[    0.164750] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.164766] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.164791] TCP: Hash tables configured (established 8192 bind 8192)
[    0.164810] TCP: reno registered
[    0.164812] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.164820] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.164873] NET: Registered protocol family 1
[    0.165784] pci 0000:01:00.0: Video device with shadowed ROM
[    0.165801] PCI: CLS 32 bytes, default 64
[    0.165843] Unpacking initramfs...
[    0.446451] Freeing initrd memory: 15000K (f62a4000 - f714a000)
[    0.446708] microcode: CPU0 sig=0x10676, pf=0x1, revision=0x60f
[    0.446717] microcode: CPU1 sig=0x10676, pf=0x1, revision=0x60c
[    0.446809] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.447119] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.447193] audit: initializing netlink subsys (disabled)
[    0.447218] audit: type=2000 audit(1447960763.444:1): initialized
[    0.447522] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.447539] zbud: loaded
[    0.447623] VFS: Disk quotas dquot_6.5.2
[    0.447640] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.447699] msgmni has been set to 1677
[    0.448020] alg: No test for stdrng (krng)
[    0.448042] bounce: pool size: 64 pages
[    0.448058] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.448102] io scheduler noop registered
[    0.448104] io scheduler deadline registered
[    0.448136] io scheduler cfq registered (default)
[    0.448350] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.448401] pcieport 0000:00:1c.0: enabling device (0106 -> 0107)
[    0.448468] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[    0.448589] pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X
[    0.448648] pcieport 0000:00:1c.5: enabling device (0106 -> 0107)
[    0.448713] pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X
[    0.448806] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.448825] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.448846] intel_idle: does not run on family 6 model 23
[    0.448901] GHES: HEST is not enabled!
[    0.448920] isapnp: Scanning for PnP cards...
[    0.801629] isapnp: No Plug & Play device found
[    0.801700] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.822049] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.822458] Linux agpgart interface v0.103
[    0.822742] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    0.822743] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    0.823267] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.823374] mousedev: PS/2 mouse device common for all mice
[    0.823430] rtc_cmos 00:01: RTC can wake from S4
[    0.823542] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    0.823565] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.823581] ledtrig-cpu: registered to indicate activity on CPUs
[    0.824114] TCP: cubic registered
[    0.824140] NET: Registered protocol family 10
[    0.824362] mip6: Mobile IPv6
[    0.824365] NET: Registered protocol family 17
[    0.824370] mpls_gso: MPLS GSO support
[    0.824511] Using IPI No-Shortcut mode
[    0.824619] registered taskstats version 1
[    0.825049] rtc_cmos 00:01: setting system clock to 2015-11-19 19:19:24 UTC (1447960764)
[    0.825104] PM: Hibernation image not present or could not be loaded.
[    0.825464] Freeing unused kernel memory: 656K (c166d000 - c1711000)
[    0.825497] Write protecting the kernel text: 4604k
[    0.825533] Write protecting the kernel read-only data: 1452k
[    0.825534] NX-protecting the kernel data: 3588k
[    0.833855] systemd-udevd[60]: starting version 215
[    0.834165] random: systemd-udevd urandom read with 0 bits of entropy available
[    0.842794] ACPI: bus type USB registered
[    0.842824] usbcore: registered new interface driver usbfs
[    0.842836] usbcore: registered new interface driver hub
[    0.844079] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.846656] atl1 0000:02:00.0: version 2.1.3
[    0.848681] SCSI subsystem initialized
[    0.849908] usbcore: registered new device driver usb
[    0.850351] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.850643] uhci_hcd: USB Universal Host Controller Interface driver
[    0.850773] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    0.850780] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.850786] ehci-pci: EHCI PCI platform driver
[    0.850788] uhci_hcd 0000:00:1a.0: detected 2 ports
[    0.850820] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800
[    0.851569] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[    0.851571] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.851574] usb usb1: Product: UHCI Host Controller
[    0.851575] usb usb1: Manufacturer: Linux 3.16.0-4-686-pae uhci_hcd
[    0.851577] usb usb1: SerialNumber: 0000:00:1a.0
[    0.851707] hub 1-0:1.0: USB hub found
[    0.851713] hub 1-0:1.0: 2 ports detected
[    0.851900] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    0.851906] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[    0.851912] uhci_hcd 0000:00:1a.1: detected 2 ports
[    0.851937] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
[    0.851975] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    0.851977] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.851979] usb usb2: Product: UHCI Host Controller
[    0.851981] usb usb2: Manufacturer: Linux 3.16.0-4-686-pae uhci_hcd
[    0.851982] usb usb2: SerialNumber: 0000:00:1a.1
[    0.852119] hub 2-0:1.0: USB hub found
[    0.852125] hub 2-0:1.0: 2 ports detected
[    0.852289] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    0.852295] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3
[    0.852300] uhci_hcd 0000:00:1a.2: detected 2 ports
[    0.852324] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000bc00
[    0.852362] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    0.852364] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.852366] usb usb3: Product: UHCI Host Controller
[    0.852367] usb usb3: Manufacturer: Linux 3.16.0-4-686-pae uhci_hcd
[    0.852369] usb usb3: SerialNumber: 0000:00:1a.2
[    0.852478] hub 3-0:1.0: USB hub found
[    0.852483] hub 3-0:1.0: 2 ports detected
[    0.852674] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.852679] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[    0.852685] uhci_hcd 0000:00:1d.0: detected 2 ports
[    0.852710] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080
[    0.852821] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    0.852823] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.852825] usb usb4: Product: UHCI Host Controller
[    0.852826] usb usb4: Manufacturer: Linux 3.16.0-4-686-pae uhci_hcd
[    0.852828] usb usb4: SerialNumber: 0000:00:1d.0
[    0.852939] hub 4-0:1.0: USB hub found
[    0.852945] hub 4-0:1.0: 2 ports detected
[    0.853109] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.853115] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
[    0.853120] uhci_hcd 0000:00:1d.1: detected 2 ports
[    0.853144] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
[    0.853184] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    0.853186] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.853188] usb usb5: Product: UHCI Host Controller
[    0.853190] usb usb5: Manufacturer: Linux 3.16.0-4-686-pae uhci_hcd
[    0.853191] usb usb5: SerialNumber: 0000:00:1d.1
[    0.853299] hub 5-0:1.0: USB hub found
[    0.853305] hub 5-0:1.0: 2 ports detected
[    0.853812] ehci-pci 0000:00:1a.7: EHCI Host Controller
[    0.853817] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 6
[    0.853829] ehci-pci 0000:00:1a.7: debug port 1
[    0.857718] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported
[    0.857793] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfe7ffc00
[    0.857858] libata version 3.00 loaded.
[    0.858514] ahci 0000:03:00.0: version 3.0
[    0.868019] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    0.868339] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
[    0.868342] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.868344] usb usb6: Product: EHCI Host Controller
[    0.868345] usb usb6: Manufacturer: Linux 3.16.0-4-686-pae ehci_hcd
[    0.868347] usb usb6: SerialNumber: 0000:00:1a.7
[    0.868457] hub 6-0:1.0: USB hub found
[    0.868463] hub 6-0:1.0: 6 ports detected
[    0.872097] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[    0.872100] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
[    0.872524] scsi0 : ahci
[    0.872617] scsi1 : ahci
[    0.872677] ata1: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe100 irq 16
[    0.872680] ata2: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe180 irq 16
[    0.872719] pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
[    0.873485] scsi2 : pata_jmicron
[    0.873565] scsi3 : pata_jmicron
[    0.873618] ata3: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 17
[    0.873619] ata4: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 17
[    0.892089] hub 1-0:1.0: USB hub found
[    0.892096] hub 1-0:1.0: 2 ports detected
[    0.916052] hub 2-0:1.0: USB hub found
[    0.916059] hub 2-0:1.0: 2 ports detected
[    0.928032] firewire_ohci 0000:05:02.2: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[    0.940052] hub 3-0:1.0: USB hub found
[    0.940059] hub 3-0:1.0: 2 ports detected
[    0.940352] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.940358] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 7
[    0.940369] ehci-pci 0000:00:1d.7: debug port 1
[    0.944264] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[    0.944271] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfe7ff800
[    0.956012] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.956054] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
[    0.956056] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.956058] usb usb7: Product: EHCI Host Controller
[    0.956060] usb usb7: Manufacturer: Linux 3.16.0-4-686-pae ehci_hcd
[    0.956061] usb usb7: SerialNumber: 0000:00:1d.7
[    0.956170] hub 7-0:1.0: USB hub found
[    0.956176] hub 7-0:1.0: 6 ports detected
[    0.980071] hub 4-0:1.0: USB hub found
[    0.980080] hub 4-0:1.0: 2 ports detected
[    0.992042] firewire_ohci 0000:05:03.0: added OHCI v1.10 device as card 1, 4 IR + 8 IT contexts, quirks 0x11
[    1.004069] hub 5-0:1.0: USB hub found
[    1.004078] hub 5-0:1.0: 2 ports detected
[    1.004232] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.004238] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[    1.004244] uhci_hcd 0000:00:1d.2: detected 2 ports
[    1.004261] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480
[    1.004307] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[    1.004309] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.004311] usb usb8: Product: UHCI Host Controller
[    1.004313] usb usb8: Manufacturer: Linux 3.16.0-4-686-pae uhci_hcd
[    1.004314] usb usb8: SerialNumber: 0000:00:1d.2
[    1.004428] hub 8-0:1.0: USB hub found
[    1.004435] hub 8-0:1.0: 2 ports detected
[    1.004897] ata_piix 0000:00:1f.2: version 2.13
[    1.004963] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
[    1.006977] scsi4 : ata_piix
[    1.007059] scsi5 : ata_piix
[    1.007114] ata5: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 22
[    1.007117] ata6: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 22
[    1.007187] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[    1.009071] scsi6 : ata_piix
[    1.009156] scsi7 : ata_piix
[    1.009210] ata7: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 22
[    1.009213] ata8: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 22
[    1.045569] ata3.01: ATA-7: WDC WD2500JB-00REA0, 20.00K20, max UDMA/100
[    1.045573] ata3.01: 488397168 sectors, multi 0: LBA48 
[    1.052678] ata3.01: configured for UDMA/100
[    1.180030] usb 6-1: new high-speed USB device number 2 using ehci-pci
[    1.192031] ata2: SATA link down (SStatus 0 SControl 300)
[    1.192061] ata1: SATA link down (SStatus 0 SControl 300)
[    1.192195] scsi 2:0:1:0: Direct-Access     ATA      WDC WD2500JB-00R 0K20 PQ: 0 ANSI: 5
[    1.314089] usb 6-1: New USB device found, idVendor=048d, idProduct=9135
[    1.314093] usb 6-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.424023] usb 6-4: new high-speed USB device number 3 using ehci-pci
[    1.428086] firewire_core 0000:05:02.2: created device fw0: GUID 00023c00300550f7, S400
[    1.444016] tsc: Refined TSC clocksource calibration: 2671.603 MHz
[    1.484043] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.484141] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.484231] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.492176] firewire_core 0000:05:03.0: created device fw1: GUID 001e8c0000117773, S400
[    1.492264] ata6.00: ATAPI: HL-DT-ST DVDRAM GH24NSB0, LM00, max UDMA/133
[    1.492386] ata8.00: ATA-9: WDC WD10EZEX-08Y20A0, 02.01A02, max UDMA/100
[    1.492388] ata8.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.500251] ata8.00: configured for UDMA/100
[    1.508189] ata6.00: configured for UDMA/133
[    1.510081] ata5.00: ATA-8: KINGSTON SH103S3120G, 521ABBF0, max UDMA/133
[    1.510084] ata5.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.541923] ata5.00: configured for UDMA/133
[    1.542006] scsi 4:0:0:0: Direct-Access     ATA      KINGSTON SH103S3 BBF0 PQ: 0 ANSI: 5
[    1.543038] scsi 5:0:0:0: CD-ROM            HL-DT-ST DVDRAM GH24NSB0  LM00 PQ: 0 ANSI: 5
[    1.572090] usb 6-4: New USB device found, idVendor=19d2, idProduct=2000
[    1.572093] usb 6-4: New USB device strings: Mfr=3, Product=2, SerialNumber=4
[    1.572096] usb 6-4: Product: ZTE WCDMA Technologies MSM
[    1.572098] usb 6-4: Manufacturer: ZTE,Incorporated
[    1.572100] usb 6-4: SerialNumber: MF6310ZTED010000
[    1.575664] usb-storage 6-4:1.0: USB Mass Storage device detected
[    1.575720] scsi8 : usb-storage 6-4:1.0
[    1.575790] usbcore: registered new interface driver usb-storage
[    1.740023] usb 7-4: new high-speed USB device number 2 using ehci-pci
[    1.919940] usb 7-4: New USB device found, idVendor=0424, idProduct=2228
[    1.919943] usb 7-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.919946] usb 7-4: Product: Flash Card Reader
[    1.919948] usb 7-4: Manufacturer: Generic
[    1.919950] usb 7-4: SerialNumber: 000022272228
[    1.920235] usb-storage 7-4:1.0: USB Mass Storage device detected
[    1.920304] scsi9 : usb-storage 7-4:1.0
[    2.444049] Switched to clocksource tsc
[    2.568015] usb 3-2: new low-speed USB device number 2 using uhci_hcd
[    2.573054] scsi 8:0:0:0: CD-ROM            ZTE      USB SCSI CD-ROM  2.31 PQ: 0 ANSI: 2
[    2.583223] sr0: scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.583226] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.583379] sr 5:0:0:0: Attached scsi CD-ROM sr0
[    2.584971] sr1: scsi-1 drive
[    2.585150] sr 8:0:0:0: Attached scsi CD-ROM sr1
[    2.585524] scsi 2:0:1:0: Attached scsi generic sg0 type 0
[    2.585560] scsi 4:0:0:0: Attached scsi generic sg1 type 0
[    2.585693] sr 5:0:0:0: Attached scsi generic sg2 type 5
[    2.585729] sr 8:0:0:0: Attached scsi generic sg3 type 5
[    2.929955] scsi 9:0:0:0: Direct-Access     Generic  Flash HS-CF      3.95 PQ: 0 ANSI: 0
[    2.933829] scsi 9:0:0:1: Direct-Access     Generic  Flash HS-MS      3.95 PQ: 0 ANSI: 0
[    2.937577] scsi 9:0:0:2: Direct-Access     Generic  Flash HS-SM      3.95 PQ: 0 ANSI: 0
[    2.940827] scsi 9:0:0:3: Direct-Access     Generic  Flash HS-SD/MMC  3.95 PQ: 0 ANSI: 0
[    2.941033] scsi 9:0:0:0: Attached scsi generic sg4 type 0
[    2.941414] scsi 9:0:0:1: Attached scsi generic sg5 type 0
[    2.941548] scsi 9:0:0:2: Attached scsi generic sg6 type 0
[    2.941889] scsi 9:0:0:3: Attached scsi generic sg7 type 0
[    2.942712] sd 4:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[    2.942761] sd 4:0:0:0: [sdb] Write Protect is off
[    2.942764] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    2.942780] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.943016] sd 2:0:1:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    2.943061] sd 2:0:1:0: [sda] Write Protect is off
[    2.943064] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
[    2.943081] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.946970]  sdb: sdb1 sdb2 sdb3 < sdb5 sdb6 sdb7 sdb8 >
[    2.947598] sd 4:0:0:0: [sdb] Attached SCSI disk
[    2.952350]  sda: sda1
[    2.952564] sd 2:0:1:0: [sda] Attached SCSI disk
[    3.028066] sd 9:0:0:0: [sdc] Attached SCSI removable disk
[    3.032440] sd 9:0:0:1: [sdd] Attached SCSI removable disk
[    3.037441] sd 9:0:0:2: [sde] Attached SCSI removable disk
[    3.045065] sd 9:0:0:3: [sdf] Attached SCSI removable disk
[    3.149032] usb 3-2: New USB device found, idVendor=09da, idProduct=000e
[    3.149036] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.149038] usb 3-2: Product: PS/2+USB Mouse
[    3.149041] usb 3-2: Manufacturer: A4Tech
[    3.162923] hidraw: raw HID events driver (C) Jiri Kosina
[    3.177404] usbcore: registered new interface driver usbhid
[    3.177406] usbhid: USB HID core driver
[    3.178119] input: A4Tech PS/2+USB Mouse as /devices/pci0000:00/0000:00:1a.2/usb3/3-2/3-2:1.0/0003:09DA:000E.0001/input/input1
[    3.178189] hid-generic 0003:09DA:000E.0001: input,hidraw0: USB HID v1.10 Mouse [A4Tech PS/2+USB Mouse] on usb-0000:00:1a.2-2/input0
[    3.876021] floppy0: no floppy controllers found
[    6.020040] ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    6.028796] ata7.00: ATA-8: WDC WD5000AAKB-00H8A0, 05.04E05, max UDMA/133
[    6.028800] ata7.00: 976773168 sectors, multi 16: LBA48 
[    6.044803] ata7.00: configured for UDMA/133
[    6.044887] scsi 6:0:0:0: Direct-Access     ATA      WDC WD5000AAKB-0 4E05 PQ: 0 ANSI: 5
[    6.045156] sd 6:0:0:0: Attached scsi generic sg8 type 0
[    6.045237] sd 6:0:0:0: [sdg] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    6.045571] scsi 7:0:0:0: Direct-Access     ATA      WDC WD10EZEX-08Y 1A02 PQ: 0 ANSI: 5
[    6.045744] sd 7:0:0:0: [sdh] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    6.045746] sd 7:0:0:0: [sdh] 4096-byte physical blocks
[    6.045772] sd 7:0:0:0: Attached scsi generic sg9 type 0
[    6.045815] sd 7:0:0:0: [sdh] Write Protect is off
[    6.045817] sd 7:0:0:0: [sdh] Mode Sense: 00 3a 00 00
[    6.045860] sd 7:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    6.046058] sd 6:0:0:0: [sdg] Write Protect is off
[    6.046061] sd 6:0:0:0: [sdg] Mode Sense: 00 3a 00 00
[    6.046424] sd 6:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    6.059036]  sdh: sdh1
[    6.059238] sd 7:0:0:0: [sdh] Attached SCSI disk
[    6.064193]  sdg: sdg2 < sdg5 >
[    6.064672] sd 6:0:0:0: [sdg] Attached SCSI disk
[    6.274431] PM: Starting manual resume from disk
[    6.274435] PM: Hibernation image partition 8:24 present
[    6.274437] PM: Looking for hibernation image.
[    6.276499] PM: Image not found (code -22)
[    6.276501] PM: Hibernation image not present or could not be loaded.
[    6.311686] EXT4-fs (sdb6): mounted filesystem with ordered data mode. Opts: (null)
[    6.347439] random: nonblocking pool is initialized
[    6.504455] lp: driver loaded but no devices found
[    6.506955] ppdev: user-space parallel port driver
[    6.512399] fuse init (API version 7.23)
[    6.536274] systemd-udevd[199]: starting version 215
[    6.623300] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[    6.623305] ACPI: Power Button [PWRB]
[    6.623465] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    6.623468] ACPI: Power Button [PWRF]
[    6.628496] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    6.667100] [drm] Initialized drm 1.1.0 20060810
[    6.671422] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[    6.671516] snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
[    6.671540] snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X
[    6.701979] gameport gameport0: EMU10K1 is pci0000:05:02.1/gameport0, io 0xec00, speed 1065kHz
[    6.702579] [drm] radeon kernel modesetting enabled.
[    6.720833] [drm] initializing kernel modesetting (RV730 0x1002:0x9490 0x174B:0xE880).
[    6.720850] [drm] register mmio base: 0xFE8E0000
[    6.720851] [drm] register mmio size: 65536
[    6.720946] ATOM BIOS: 
[    6.720982] radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[    6.720984] radeon 0000:01:00.0: GTT: 1024M 0x0000000020000000 - 0x000000005FFFFFFF
[    6.720986] [drm] Detected VRAM RAM=512M, BAR=256M
[    6.720988] [drm] RAM width 128bits DDR
[    6.721190] [TTM] Zone  kernel: Available graphics memory: 429838 kiB
[    6.721192] [TTM] Zone highmem: Available graphics memory: 2073106 kiB
[    6.721194] [TTM] Initializing pool allocator
[    6.721199] [TTM] Initializing DMA pool allocator
[    6.721221] [drm] radeon: 512M of VRAM memory ready
[    6.721222] [drm] radeon: 1024M of GTT memory ready.
[    6.721236] [drm] Loading RV730 Microcode
[    6.725348] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/RV730_pfp.bin
[    6.726329] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/RV730_me.bin
[    6.727198] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/R700_rlc.bin
[    6.727740] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/RV730_smc.bin
[    6.727745] [drm] Internal thermal controller with fan control
[    6.728848] [drm] radeon: dpm initialized
[    6.732512] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/RV710_uvd.bin
[    6.732541] [drm] GART: num cpu pages 262144, num gpu pages 262144
[    6.758448] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input4
[    6.763699] [drm] PCIE GART of 1024M enabled (table at 0x000000000025D000).
[    6.763732] radeon 0000:01:00.0: WB enabled
[    6.763736] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xff68ac00
[    6.763738] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xff68ac0c
[    6.764618] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c598 and cpu addr 0xf861c598
[    6.768531] sound hdaudioC0D0: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[    6.768535] sound hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    6.768537] sound hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    6.768538] sound hdaudioC0D0:    mono: mono_out=0x0
[    6.768540] sound hdaudioC0D0:    dig-out=0x1e/0x0
[    6.768541] sound hdaudioC0D0:    inputs:
[    6.768544] sound hdaudioC0D0:      Front Mic=0x19
[    6.768546] sound hdaudioC0D0:      Rear Mic=0x18
[    6.768547] sound hdaudioC0D0:      Line=0x1a
[    6.770763] ACPI Warning: SystemIO range 0x00000400-0x0000041f conflicts with OpRegion 0x00000400-0x0000040f (\SMRG) (20140424/utaddress-258)
[    6.770768] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    6.776240] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    6.776242] [drm] Driver supports precise vblank timestamp query.
[    6.776246] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[    6.776262] radeon 0000:01:00.0: irq 46 for MSI/MSI-X
[    6.776271] radeon 0000:01:00.0: radeon: using MSI.
[    6.776296] [drm] radeon: irq initialized.
[    6.823967] EXT4-fs (sdb6): re-mounted. Opts: errors=remount-ro
[    6.824261] [drm] ring test on 0 succeeded in 0 usecs
[    6.824269] [drm] ring test on 3 succeeded in 2 usecs
[    6.890314] Adding 4113404k swap on /dev/sdb8.  Priority:-1 extents:1 across:4113404k SSFS
[    6.897271] input: PC Speaker as /devices/platform/pcspkr/input/input6
[    6.921888] EXT4-fs (sdb5): mounting ext2 file system using the ext4 subsystem
[    6.927838] EXT4-fs (sdb5): mounted filesystem without journal. Opts: (null)
[    6.965001] EXT4-fs (sdb7): mounted filesystem with ordered data mode. Opts: (null)
[    6.983587] systemd-journald[190]: Received request to flush runtime journal from PID 1
[    7.019531] [drm] ring test on 5 succeeded in 1 usecs
[    7.019537] [drm] UVD initialized successfully.
[    7.019669] [drm] ib test on ring 0 succeeded in 0 usecs
[    7.019685] [drm] ib test on ring 3 succeeded in 0 usecs
[    7.039347] iTCO_vendor_support: vendor-support=0
[    7.039792] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    7.039829] iTCO_wdt: Found a ICH9 TCO device (Version=2, TCOBASE=0x0860)
[    7.039919] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    7.187660] [drm] ib test on ring 5 succeeded
[    7.187982] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input5
[    7.193394] [drm] Radeon Display Connectors
[    7.193397] [drm] Connector 0:
[    7.193398] [drm]   DVI-I-1
[    7.193399] [drm]   HPD2
[    7.193401] [drm]   DDC: 0x7f10 0x7f10 0x7f14 0x7f14 0x7f18 0x7f18 0x7f1c 0x7f1c
[    7.193402] [drm]   Encoders:
[    7.193403] [drm]     CRT2: INTERNAL_KLDSCP_DAC2
[    7.193404] [drm]     DFP2: INTERNAL_UNIPHY1
[    7.193405] [drm] Connector 1:
[    7.193406] [drm]   DIN-1
[    7.193407] [drm]   Encoders:
[    7.193408] [drm]     TV1: INTERNAL_KLDSCP_DAC2
[    7.193409] [drm] Connector 2:
[    7.193410] [drm]   DVI-I-2
[    7.193411] [drm]   HPD1
[    7.193413] [drm]   DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c
[    7.193414] [drm]   Encoders:
[    7.193415] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[    7.193416] [drm]     DFP1: INTERNAL_UNIPHY
[    7.198133] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[    7.198219] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[    7.198291] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    7.198361] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    7.198432] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[    7.198500] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[    7.198568] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[    7.198636] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[    7.270205] [drm] fb mappable at 0xD045E000
[    7.270208] [drm] vram apper at 0xD0000000
[    7.270209] [drm] size 7299072
[    7.270210] [drm] fb depth is 24
[    7.270211] [drm]    pitch is 6912
[    7.270404] fbcon: radeondrmfb (fb0) is primary device
[    7.306665] Console: switching to colour frame buffer device 160x64
[    7.313218] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[    7.313220] radeon 0000:01:00.0: registered panic notifier
[    7.315622] RPC: Registered named UNIX socket transport module.
[    7.315625] RPC: Registered udp transport module.
[    7.315627] RPC: Registered tcp transport module.
[    7.315628] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    7.318663] FS-Cache: Loaded
[    7.324049] [drm] Initialized radeon 2.39.0 20080528 for 0000:01:00.0 on minor 0
[    7.326393] FS-Cache: Netfs 'nfs' registered for caching
[    7.334201] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    7.584724] cfg80211: Calling CRDA to update world regulatory domain
[    7.621404] cfg80211: World regulatory domain updated:
[    7.621408] cfg80211:  DFS Master region: unset
[    7.621410] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[    7.621412] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    7.621414] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    7.621416] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[    7.621418] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[    7.621420] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[    7.621422] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[    7.621423] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[    7.621425] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[    7.849218] usb 6-1: dvb_usb_af9035: prechip_version=83 chip_version=02 chip_type=9135
[    7.849589] usb 6-1: dvb_usb_v2: found a 'ITE 9135 Generic' in cold state
[    7.849607] usb 6-1: firmware: failed to load dvb-usb-it9135-02.fw (-2)
[    7.849654] usb 6-1: Direct firmware load failed with error -2
[    7.849656] usb 6-1: Falling back to user helper
[    7.850291] usb 6-1: dvb_usb_v2: Did not find the firmware file 'dvb-usb-it9135-02.fw'. Please see linux/Documentation/dvb/ for more details on firmware-problems. Status -12
[    7.850385] dvb_usb_af9035: probe of 6-1:1.0 failed with error -12
[    7.850404] usbcore: registered new interface driver dvb_usb_af9035
[    7.903560] atl1 0000:02:00.0: irq 47 for MSI/MSI-X
[    7.904072] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    9.652038] floppy0: no floppy controllers found
[   13.158141] usb 6-4: USB disconnect, device number 3
[   13.524025] usb 6-4: new high-speed USB device number 5 using ehci-pci
[   13.657971] usb 6-4: New USB device found, idVendor=19d2, idProduct=0031
[   13.657975] usb 6-4: New USB device strings: Mfr=3, Product=2, SerialNumber=4
[   13.657978] usb 6-4: Product: ZTE WCDMA Technologies MSM
[   13.657980] usb 6-4: Manufacturer: ZTE,Incorporated
[   13.657983] usb 6-4: SerialNumber: MF6310ZTED010000
[   13.661331] usb-storage 6-4:1.2: USB Mass Storage device detected
[   13.662963] scsi10 : usb-storage 6-4:1.2
[   13.680610] usbcore: registered new interface driver usbserial
[   13.680785] usbcore: registered new interface driver usbserial_generic
[   13.680828] usbserial: USB Serial support registered for generic
[   13.684748] usbcore: registered new interface driver option
[   13.684768] usbserial: USB Serial support registered for GSM modem (1-port)
[   13.684882] option 6-4:1.0: GSM modem (1-port) converter detected
[   13.685197] usb 6-4: GSM modem (1-port) converter now attached to ttyUSB0
[   13.685229] option 6-4:1.1: GSM modem (1-port) converter detected
[   13.685366] usb 6-4: GSM modem (1-port) converter now attached to ttyUSB1
[   13.685403] option 6-4:1.3: GSM modem (1-port) converter detected
[   13.685528] usb 6-4: GSM modem (1-port) converter now attached to ttyUSB2
[   14.661120] scsi 10:0:0:0: Direct-Access     ZTE      MMC Storage      2.31 PQ: 0 ANSI: 2
[   14.662176] sd 10:0:0:0: Attached scsi generic sg3 type 0
[   14.666603] sd 10:0:0:0: [sdi] Attached SCSI removable disk
piotr@BlaDeb:~$

Offline

 

#7  2015-11-19 21:30:51

  ilin - Palacz

ilin
Palacz
Skąd: PRLu
Zarejestrowany: 2006-05-03

Re: Dekoder DVB-T Omega t900 nie zawsze "widoczny"

Dla 100 procentowej pewności pokaż jeszcze

Kod:

ls /lib/firmware | grep dvb-usb

Problemy rozwiązujemy na forum nie na PW -> Niech inni na tym skorzystają.
Polski portal Debiana

Offline

 

#8  2015-11-19 22:40:08

  patria - Użytkownik

patria
Użytkownik
Zarejestrowany: 2013-05-28

Re: Dekoder DVB-T Omega t900 nie zawsze "widoczny"

Kod:

 ls /lib/firmware | grep dvb-usb

dvb-usb-dib0700-1.20.fw

Offline

 

#9  2015-11-19 23:23:21

  neo86 - Lubię marudzić

neo86
Lubię marudzić
Skąd: California
Zarejestrowany: 2014-06-29

Re: Dekoder DVB-T Omega t900 nie zawsze "widoczny"

ilin napisał(-a):

neo86 napisał(-a):

Pod VLC, MeTV był wykrywany ale nie wykrywał mi w ogóle kanałów TV i radiowych.

Jakbyś potrafił się tymi programami posługiwać to i w nich by wszystko działało.

Miałeś ten tuner, że wiesz lepiej? Jeśli nie to sorry ale się mylisz.

VLC przeleciał wszystkie częstotliwości, MeTV też. Pół godziny zajęło jednemu i pół drugiemu. Ani jednego kanału nie znalazł. Włączyłem Kaffeine i znalazł mi 35 na 40 dostępnych w kablówce i to w 15 minut. Nieźle jak na Tuner chińskiej produkcji za 25 zł. I to na czystym kablu TV bez wzmocnienia przy użyciu zasilacza (często wymagane do tunerów/dekoderów DVB).

patria napisał(-a):

Kod:

 ls /lib/firmware | grep dvb-usb

dvb-usb-dib0700-1.20.fw

To jest zły firmware. Dlatego masz problem z Tunerem. do Zolid Mini DVB-T Stick poprawny firmware to jeden z tych:

it9135-01.fw
it9137-01.fw
it9135-02.fw

Wrzuć wszystkie i możliwe, że chińczyk sam dobierze sobie poprawny firmware. Ja tak zrobiłem i mi poprawnie działa ale tylko w Kaffeine. Nie ma co wiele wymagać od taniego chińskiego chipa.

Ja takiego Zolid Mini DVB-T Stick używam (z przejściówką do kabla antenowego):

http://s25.postimg.org/n62q6x8y3/tuner_dvb.jpg

i on u mnie współpracuje z firmware it9135-01.fw

U Ciebie w nazwie w terminalu widnieje oznaczenie "9135" co oznacza, że powinno współpracować z firmware takim jak u mnie czyli it9135-01.fw lub it9135-02.fw ale to musisz sprawdzić. Ale zdecydowanie dvb-usb-dib0700-1.20.fw jest niepoprawne. I nie jest ono do tego tunera.

Ostatnio edytowany przez neo86 (2015-11-19 23:53:21)

Offline

 

#10  2015-11-20 05:30:02

  ilin - Palacz

ilin
Palacz
Skąd: PRLu
Zarejestrowany: 2006-05-03

Re: Dekoder DVB-T Omega t900 nie zawsze "widoczny"

neo86 napisał(-a):

Miałeś ten tuner, że wiesz lepiej? Jeśli nie to sorry ale się mylisz.

Oj neo.

Dla tych programów listę kanałów generuje się za pomocą wscan.
Następnie dla vlc podaje się plik z listą jako argument przy oglądaniu.
Dla me-tv przy skanowaniu.

A tak na marginesie - u mnie jest tak

Kod:

[   11.984099] usb 2-1.1: dvb_usb_af9035: prechip_version=83 chip_version=02 chip_type=9135
[   11.984541] usb 2-1.1: dvb_usb_v2: found a 'ITE 9135(9006) Generic' in cold state
[   12.037347] usb 2-1.1: dvb_usb_v2: downloading firmware from file 'dvb-usb-it9135-02.fw'
[   12.136863] usb 2-1.1: dvb_usb_af9035: firmware version=3.40.1.0
[   12.136881] usb 2-1.1: dvb_usb_v2: found a 'ITE 9135(9006) Generic' in warm state
[   12.138363] usb 2-1.1: dvb_usb_af9035: [0] overriding tuner from 00 to 60
[   12.139895] usb 2-1.1: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[   12.139939] DVB: registering new adapter (ITE 9135(9006) Generic)
[   12.168330] af9033 9-0038: firmware version: LINK 3.40.1.0 - OFDM 3.40.1.0
[   12.168338] af9033 9-0038: Afatech AF9033 successfully attached
[   12.168354] usb 2-1.1: DVB: registering adapter 0 frontend 0 (Afatech AF9033 (DVB-T))...
[   12.208741] it913x 9-001c: ITE IT913X BX successfully attached
[   12.255985] Registered IR keymap rc-it913x-v1
[   12.256167] input: ITE 9135(9006) Generic as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/rc/rc0/input20
[   12.256284] rc0: ITE 9135(9006) Generic as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/rc/rc0
[   12.256292] usb 2-1.1: dvb_usb_v2: 'ITE 9135(9006) Generic' successfully initialized and connected
[   12.256358] usbcore: registered new interface driver dvb_usb_af9035

@patria zainstaluj firmware.
http://forum.linuxmint.pl/index.php?PHPSESSID=5lb3e … 0011#msg40011


Problemy rozwiązujemy na forum nie na PW -> Niech inni na tym skorzystają.
Polski portal Debiana

Offline

 

#11  2015-11-20 09:10:16

  neo86 - Lubię marudzić

neo86
Lubię marudzić
Skąd: California
Zarejestrowany: 2014-06-29

Re: Dekoder DVB-T Omega t900 nie zawsze "widoczny"

ilin napisał(-a):

Dla tych programów listę kanałów generuje się za pomocą wscan.
Następnie dla vlc podaje się plik z listą jako argument przy oglądaniu.
Dla me-tv przy skanowaniu.

Dokładnie tak robiłem jak mówisz. Używałem wscan (VLC tego wymagał). Me-TV ma swój mechanizm wyszukiwania. I nic z tym tunerem oba programy nie znalazły. Tylko Kaffeine w pełni współpracuje z tym dziwnym tunerem.

Ty widzę masz nowszą wersję tego chipa:

Kod:

[   12.256292] usb 2-1.1: dvb_usb_v2: 'ITE 9135(9006) Generic'

Czyli it9135 v.2 a ja mam it9135 v.1 to też jest różnica. może dlatego u mnie tylko z jednym programem współpracuje a z innymi nie.

Ostatnio edytowany przez neo86 (2015-11-20 09:18:04)

Offline

 

#12  2015-11-20 12:26:09

  patria - Użytkownik

patria
Użytkownik
Zarejestrowany: 2013-05-28

Re: Dekoder DVB-T Omega t900 nie zawsze "widoczny"

Dziękuję wszystkim za pomoc.
Po zainstalowaniu firmware it9135-01.fw tuner poprawnie się uruchamia.
Pzdr.

Offline

 

#13  2015-11-20 17:31:57

  ilin - Palacz

ilin
Palacz
Skąd: PRLu
Zarejestrowany: 2006-05-03

Re: Dekoder DVB-T Omega t900 nie zawsze "widoczny"

neo86 napisał(-a):

Dokładnie tak robiłem jak mówisz

Czyli wscan nie znajdywał kanałów.Jak rozumiem.


Problemy rozwiązujemy na forum nie na PW -> Niech inni na tym skorzystają.
Polski portal Debiana

Offline

 

#14  2015-11-20 17:40:48

  yossarian - Szczawiożerca

yossarian
Szczawiożerca
Skąd: Shangri-La
Zarejestrowany: 2011-04-25

Re: Dekoder DVB-T Omega t900 nie zawsze "widoczny"

neo86 napisał(-a):

Ty widzę masz nowszą wersję tego chipa:

Kod:

[   12.256292] usb 2-1.1: dvb_usb_v2: 'ITE 9135(9006) Generic'

Czyli it9135 v.2 a ja mam it9135 v.1 to też jest różnica. może dlatego u mnie tylko z jednym programem współpracuje a z innymi nie.

Ty widzę, nie bardzo wiesz o czym piszesz.
dvb_usb_v2 to nazwa modułu obsługującego tunery USB. W starszych wersjach jądra sterownik tunera korzystał z poprzedniej wersji tego modułu, czyli dvb_usb.

Nie ma to nic wspólnego z samym modelem tunera.

filename:       /lib/modules/4.3.0-0.slh.1-aptosid-amd64/kernel/drivers/media/usb/dvb-usb-v2/dvb-usb-af9035.ko
firmware:       dvb-usb-it9303-01.fw
firmware:       dvb-usb-it9135-02.fw
firmware:       dvb-usb-it9135-01.fw
firmware:       dvb-usb-af9035-02.fw

license:        GPL
description:    Afatech AF9035 driver
author:         Antti Palosaari <crope@iki.fi>
srcversion:     A81BCBEB8D42AD66DDCF8B1
alias:          usb:v048Dp9306d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v2013p0262d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v2013p025Ad*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v2040pF900d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v0413p6A05d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v0CCDp0099d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v1B80pE410d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v1B80pE411d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v1B80pE409d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v07CAp0335d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v07CAp4835d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v07CAp3835d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v07CAp2835d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v07CAp1835d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v048Dp9006d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v048Dp9005d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v048Dp9135d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v07CAp0337d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v0CCDp00AAd*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v0B05p1779d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v07CAp0825d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v07CApA867d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v07CAp1867d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v07CApB835d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v07CApA835d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v0CCDp0093d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v15A4p1003d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v15A4p1002d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v15A4p1001d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v15A4p1000d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v15A4p9035d*dc*dsc*dp*ic*isc*ip*in*
depends:        i2c-core,dvb_usb_v2,usbcore,rc-core
intree:         Y
vermagic:       4.3.0-0.slh.1-aptosid-amd64 SMP preempt mod_unload modversions
parm:           adapter_nr:DVB adapter numbers (array of short)

@ilin: Na początku jest podane:

Kod:

Bus 001 Device 006: ID 048d:9135 Integrated Technology Express, Inc. Zolid Mini DVB-T Stick

Offline

 

#15  2015-11-20 17:53:41

  ilin - Palacz

ilin
Palacz
Skąd: PRLu
Zarejestrowany: 2006-05-03

Re: Dekoder DVB-T Omega t900 nie zawsze "widoczny"

I jest pytanie, która to wersja.
Dla każdej jest inny firmware.


Problemy rozwiązujemy na forum nie na PW -> Niech inni na tym skorzystają.
Polski portal Debiana

Offline

 

#16  2015-11-20 17:58:47

  yossarian - Szczawiożerca

yossarian
Szczawiożerca
Skąd: Shangri-La
Zarejestrowany: 2011-04-25

Re: Dekoder DVB-T Omega t900 nie zawsze "widoczny"

Wytłumaczenie początkowego problemu jest banalne.
Po wyłączeniu Windowsa chip tunera był ciągle aktywny (wraz z załadowanym firmware) podczas uruchamiania Linuksa.

[    7.690465] usb 2-1: dvb_usb_v2: found a 'ITE 9135 Generic' in warm state

po niezależnym włączeniu chip nie startował z powodu braku firmware:

[    7.849589] usb 6-1: dvb_usb_v2: found a 'ITE 9135 Generic' in cold state
[    7.849607] usb 6-1: firmware: failed to load dvb-usb-it9135-02.fw (-2)
[    7.849654] usb 6-1: Direct firmware load failed with error -2
[    7.849656] usb 6-1: Falling back to user helper
[    7.850291] usb 6-1: dvb_usb_v2: Did not find the firmware file 'dvb-usb-it9135-02.fw'. Please see linux/Documentation/dvb/ for more details on firmware-problems. Status -12
[    7.850385] dvb_usb_af9035: probe of 6-1:1.0 failed with error -12

Offline

 

#17  2015-11-20 18:00:57

  ilin - Palacz

ilin
Palacz
Skąd: PRLu
Zarejestrowany: 2006-05-03

Re: Dekoder DVB-T Omega t900 nie zawsze "widoczny"

Czyli prawidłowym firmware jest dvb-usb-it9135-02.fw
Czyli nowa wersja karty.


Problemy rozwiązujemy na forum nie na PW -> Niech inni na tym skorzystają.
Polski portal Debiana

Offline

 

#18  2015-11-20 18:05:41

  yossarian - Szczawiożerca

yossarian
Szczawiożerca
Skąd: Shangri-La
Zarejestrowany: 2011-04-25

Re: Dekoder DVB-T Omega t900 nie zawsze "widoczny"

ilin napisał(-a):

Czyli prawidłowym firmware jest dvb-usb-it9135-02.fw
Czyli nowa wersja karty.

Nie ma wątpliwości:

patria napisał(-a):

[    7.849218] usb 6-1: dvb_usb_af9035: prechip_version=83 chip_version=02 chip_type=9135

Offline

 

#19  2015-11-20 19:42:13

  neo86 - Lubię marudzić

neo86
Lubię marudzić
Skąd: California
Zarejestrowany: 2014-06-29

Re: Dekoder DVB-T Omega t900 nie zawsze "widoczny"

ilin napisał(-a):

neo86 napisał(-a):

Dokładnie tak robiłem jak mówisz

Czyli wscan nie znajdywał kanałów.Jak rozumiem.

Dokładnie wscan nie widział żadnego kanału. Kierowałem się radami z http://forum.emitel.pl/viewtopic.php?t=2725&start=200 używając tej rady:

w_scan -c PL -L -E 0 -t 3 -F >> lista.xspf

Pownno pomóc przy wykryciu mux1, -E 0 pomija programy kodowane, -t 3 włącza skanowanie dokładne co pomaga przy słabszym sygnale, -F wydłuża czas oczekiwania na odpowiedź tunera.

ale nic nie znalazło.

Włączyłem Kaffeine który na automacie sam znalazł prawie wszystkie kanały (35 z 40 możliwych). W kablówce mam National Geographic oraz TV4 (telewizor stary analogowy te kanały widzi a tunera chciałem użyć dla wyższej jakości bez drobnego śnieżenia) i tego mi nie znajduje nie wiem czemu a na tych kanałach by mi zależało najbardziej (szczególnie na NG). Próbowałem ostatnio z użyciem zasilacza DVB na kablu antenowym ale też nic nie daje. Widocznie tuner chińczyk tego nie daje rady ogarnąć. W sumie tak samo jest z dekoderem pod TV też tych kanałów nie znajduje (też jakiś chińczyk bo zależało mi na takim co posiada Smart TV na bazie Androida).

Ostatnio edytowany przez neo86 (2015-11-20 19:46:23)

Offline

 

#20  2015-11-20 19:48:45

  ilin - Palacz

ilin
Palacz
Skąd: PRLu
Zarejestrowany: 2006-05-03

Re: Dekoder DVB-T Omega t900 nie zawsze "widoczny"


Problemy rozwiązujemy na forum nie na PW -> Niech inni na tym skorzystają.
Polski portal Debiana

Offline

 

Stopka forum

Powered by PunBB
© Copyright 2002–2005 Rickard Andersson
Możesz wyłączyć AdBlock — tu nie ma reklam ;-)