Forum Debian Users Gang

Damien · 2014-04-19 01:11:02

Witam.
Niedawno "wskrzesiłem" komputer z 2003 roku i postanowiłem postawić na nim Debiana testing. Wszystko w sumie poszło dobrze, ale niestety mam problem ze zmuszeniem do działania sterowników do karty graficznej NVIDIA GeForce FX 5700. Wg tego co dowiedziałem się w internecie, dla tego modelu odpowiednimi sterownikami są te w wersji "173xx". Instalowałem je wg tego poradnika: http://dug.net.pl/tekst/142/nvidia___zamkniete_sterowniki_w_debianie/ , sposobem z pakietami z repozytoriów. Podczas instalacji nie było żadnych problemów (przynajmniej nie zauważyłem jakiegoś niepokojącego komunikatu). Jednak teraz po wpisaniu "startx" wyskakują błędy, a nie pulpit:

Kod:

Loading extension GLX
modprobe: ERROR: could not insert 'nvidia_legacy_173xx': Unknown symbol in module, or unknown parameter (see dmesg)
(EE)
Fatal server error:
(EE) no screens found(EE)
(EE)
Please consult the The x.Org Foundation support
at http://wiki.x.org
for help.
(EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
(EE)
(EE) Server terminated with error (1). Closing log file.
xinit: giving up
xinit: unable to connect to X server: Connection refused
xinit: server error

I po tym mogę sobie dalej pisać komendy...

Po wpisaniu komendy:

Kod:

glxinfo |grep -Ei '(direct rendering|opengl)'

otrzymuję:

Kod:

Error: unable to open display

Mój plik 20-nvidia.conf w /etc/X11/xorg.conf.d wygląda tak:

Kod:

Section "Device"
            Identifier "My GPU"
            Driver "nvidia"
EndSection

A tak wygląda plik blokujący sterownik "nouveau":

Kod:

# You need to run "update-initramfs -u" after editing this file.

# see #580894
blacklist nouveau

Plik ten został utworzony automatycznie przy instalacji tych sterowników. Nazywa się nvidia-blacklists-nouveau.conf i znajduje się w /etc/modprobe.d.

No a tutaj cały plik /var/log/Xorg.0.log:

Kod:

[    616.384]
X.Org X Server 1.15.0.901 (1.15.1 RC 1)
Release Date: 2014-03-21
[    616.385] X Protocol Version 11, Revision 0
[    616.385] Build Operating System: Linux 3.2.0-4-amd64 i686 Debian
[    616.385] Current Operating System: Linux debian 3.13-1-686-pae #1 SMP Debian 3.13.7-1 (2014-03-25) i686
[    616.385] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13-1-686-pae root=UUID=7f5f46e1-228b-48a4-8c99-95dc5d592590 ro quiet
[    616.386] Build date: 31 March 2014  12:04:13PM
[    616.386] xorg-server 2:1.15.0.901-1 (http://www.debian.org/support)
[    616.386] Current version of pixman: 0.32.4
[    616.386]     Before reporting problems, check http://wiki.x.org
              to make sure that you have the latest version.
[    616.386] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational,
            (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    616.387] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Apr 18 23:02:12 2014
[    616.387] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    616.388] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    616.388] (==) No Layout section.  Using the first Screen section.
[    616.388] (==) No screen section available. Using defaults.
[    616.388] (**) |-->Screen "Default Screen Section" (0)
[    616.388] (**) |    |-->Monitor "<default monitor>"
[    616.388] (==) No device specified for screen "Default Screen Section".
            Using the first device section listed.
[    616.388] (**) |    |-->Device "My GPU"
[    616.388] (==) No monitor specified for screen "Default Screen Section".
            Using a default monitor configuration.
[    616.388] (==) Automatically adding devices
[    616.388] (==) Automatically enabling devices
[    616.388] (==) Automatically adding GPU devices
[    616.389] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    616.389]        Entry deleted from font path.
[    616.389] (==) FontPath set to:
             /usr/share/fonts/X11/misc,
             /usr/share/fonts/X11/100dpi/:unscaled,
             /usr/share/fonts/X11/75dpi/:unscaled,
             /usr/share/fonts/X11/Type1,
             /usr/share/fonts/X11/100dpi,
             /usr/share/fonts/X11/75dpi,
             built-ins
[    616.389] (==) ModulePath set to "/usr/lib/xorg/modules"
[    616.389] (II) The server relies on udev to provide the list of input devices.
            If no devices become available, reconfigure udev or disable AutoAddDevices.
[    616.389] (II) Loader magic: 0xb77346c0
[    616.389] (II) Module ABI versions:
[    616.389]     X.Org ANSI C Emulation: 0.4
[    616.389]     X.Org Video Driver: 15.0
[    616.389]     X.Org XInput driver : 20.0
[    616.389]     X.Org Server Extension : 8.0
[    616.390] (--) PCI:*(0:1:0:0) 10de:0342:107d:2982 rev 161, Mem @ 0xde000000/16777216, 0xc0000000/268435456, BIOS @ 0x????????/131072
[    616.390] Initializing built-in extension Generic Event Extension
[    616.390] Initializing built-in extension SHAPE
[    616.390] Initializing built-in extension MIT-SHM
[    616.391] Initializing built-in extension XInputExtension
[    616.391] Initializing built-in extension XTEST
[    616.391] Initializing built-in extension BIG-REQUESTS
[    616.391] Initializing built-in extension SYNC
[    616.391] Initializing built-in extension XKEYBOARD
[    616.391] Initializing built-in extension XC-MISC
[    616.391] Initializing built-in extension SECURITY
[    616.391] Initializing built-in extension XINERAMA
[    616.391] Initializing built-in extension XFIXES
[    616.392] Initializing built-in extension RENDER
[    616.392] Initializing built-in extension RANDR
[    616.392] Initializing built-in extension COMPOSITE
[    616.392] Initializing built-in extension DAMAGE
[    616.392] Initializing built-in extension MIT-SCREEN-SAVER
[    616.392] Initializing built-in extension DOUBLE-BUFFER
[    616.392] Initializing built-in extension RECORD
[    616.392] Initializing built-in extension DPMS
[    616.392] Initializing built-in extension Present
[    616.393] Initializing built-in extension DRI3
[    616.393] Initializing built-in extension X-Resource
[    616.393] Initializing built-in extension XVideo
[    616.393] Initializing built-in extension XVideo-MotionCompensation
[    616.393] Initializing built-in extension SELinux
[    616.393] Initializing built-in extension XFree86-VidModeExtension
[    616.393] Initializing built-in extension XFree86-DGA
[    616.393] Initializing built-in extension XFree86-DRI
[    616.393] Initializing built-in extension DRI2
[    616.393] (II) LoadModule: "glx"
[    616.394] (II) Loading /usr/lib/xorg/modules/linux/libglx.so
[    616.397] (II) Module glx: vendor="NVIDIA Corporation"
[    616.397]     compiled for 4.0.2, module version = 1.0.0
[    616.397]     Module class: X.Org Server Extension
[    616.397] (II) NVIDIA GLX Module  173.14.39  Wed Nov 27 15:13:59 PST 2013
[    616.398] Loading extension GLX
[    616.398] (II) LoadModule: "nvidia"
[    616.398] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[    616.399] (II) Module nvidia: vendor="NVIDIA Corporation"
[    616.399]     compiled for 4.0.2, module version = 1.0.0
[    616.399]     Module class: X.Org Video Driver
[    616.399] (II) NVIDIA dlloader X Driver  173.14.39  Wed Nov 27 15:02:30 PST 2013
[    616.399] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    616.399] (--) using VT number 7

[    616.404] (II) Loading sub module "fb"
[    616.404] (II) LoadModule: "fb"
[    616.404] (II) Loading /usr/lib/xorg/modules/libfb.so
[    616.405] (II) Module fb: vendor="X.Org Foundation"
[    616.405]     compiled for 1.15.0.901, module version = 1.0.0
[    616.405]     ABI class: X.Org ANSI C Emulation, version 0.4
[    616.405] (II) Loading sub module "wfb"
[    616.405] (II) LoadModule: "wfb"
[    616.405] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    616.405] (II) Module wfb: vendor="X.Org Foundation"
[    616.405]     compiled for 1.15.0.901, module version = 1.0.0
[    616.405]     ABI class: X.Org ANSI C Emulation, version 0.4
[    616.405] (II) Loading sub module "ramdac"
[    616.405] (II) LoadModule: "ramdac"
[    616.405] (II) Module "ramdac" already built-in
[    616.407] (II) NVIDIA(0): Creating default Display subsection in Screen section
            "Default  Screen Section" for depth/fbbpp 24/32
[    616.407] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[    616.407] (==) NVIDIA(0): RGB weight 888
[    616.408] (==) NVIDIA(0): Default visual is TrueColor
[    616.408] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[    616.408] (**) NVIDIA(0): Enabling RENDER acceleration
[    616.408] (II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
[    616.408] (II) NVIDIA(0):         enabled.
[    616.482] (EE) NVIDIA(0): Failed to load the NVIDIA kernel module!
[    616.482] (EE) NVIDIA(0):  *** Aborting ***
[    616.482] (II) UnloadModule: "nvidia"
[    616.482] (II) UnloadSubModule: "wfb"
[    616.482] (II) UnloadSubModule: "fb"
[    616.482] (EE) Screen(s) found, but none have a usable configuration.
[    616.482] (EE)
Fatal server error:
[    616.482] (EE) no screens found(EE)
[    616.483] (EE)
Please consult the The X.Org Foundation support
              at http://wiki.x.org
              for help.
[    616.483] (EE) Please also check the log file at "/var/log/xorg.0.log" for additional information.
[    616.483] (EE)
[    616.487] (EE) Server terminated with error (1). Closing log file.

No i chyba tyle.

Dodam tylko, że słyszałem o jakimś patchu do sterowników od NVIDII dla kernela 3.13, ale to był do tych nowszych wersji, które nie są przeznaczone na model mojej karty graficznej.

No i jeszcze kilka informacji o moim komputerze:
Procesor: Intel Pentium 4 2.66Ghz
RAM: 2x 512MB
no i karta graficzna: NVIDIA GeForce FX 5700.

Pozdrawiam!

ArnVaker · 2014-04-19 04:23:12

Dla 173xx też jest patch, w pakietach z tego repo jest już uwzględniony:

Kod:

deb http://packages.siduction.org/fixes unstable non-free

nvidia-graphics-drivers-legacy-173xx (173.14.39-3.siduction.1) unstable; urgency=medium

* Non-maintainer upload.
* add nvidia_kernel_3.14.patch

— Torsten Wohlfarth <towo@siduction.org> Thu, 27 Mar 2014 10:57:20 +0100

nvidia-graphics-drivers-legacy-173xx (173.14.39-2.siduction.1) unstable; urgency=medium

* Non-maintainer upload.
* add 173xx-linux-3.13.patch

— Torsten Wohlfarth <towo@siduction.org> Fri, 07 Mar 2014 12:22:17 +0100

Możesz go użyć do instalacji.

Damien · 2014-04-19 12:02:12

No więc wyrzuciłem stery wcześniej zainstalowane i zainstalowalem te co podałeś. No i teraz jest tak, że przy uruchamianiu komputera gdy załaduje się wszystko, to robi się czarny ekran i ja nic nie mogę zrobić. Klawiatura przestaje w tym momencie reagować i teraz nie wiem jak z tego wybrnąć.

Edit: Ok, poradziłem sobie z tym poprzez "recovery mode", ale skoro nic mi się nie pojawiło na ekranie, to co w takim razie jest źle? Dodam, że teraz nie mam komunikatów o jakichś błędach, po prostu robi się czarny ekran i koniec do widzenia.

Ostatnio edytowany przez Damien (2014-04-19 12:07:56)

ArnVaker · 2014-04-19 12:11:53

Właściwie mogłeś dodać tamto repo i tylko zaktualizować sterowniki. Masz jakiś graficzny menedżer logowania zainstalowany? Jeśli nie masz to zainstaluj i sprawdź czy czasem nie wstanie.

Damien · 2014-04-19 12:32:20

Tak, mam LightDM, wcześniej, jeszcze przed instalacją zamkniętych driverów normalnie działał.

To jeśli usunąłem tamte sterowniki z oficjalnego repo, to możliwe, że czegoś mi teraz brakuje?

ArnVaker · 2014-04-19 12:35:58

OK, wcześniej pisałeś o startx, stąd pomysł że może nie masz menedżera logowania. Było kilka przypadków w których instalacja zamkniętych sterowników powodowała czarny ekran na konsolach tekstowych, ale tryb graficzny działał prawidłowo, gdybyś nie miał menedżera logowania nawet by pasowało. ;) Jeśli instalacja weszła normalnie to brakować nic nie powinno, od tego w końcu są zależności. W logach nic nie ma?

Damien · 2014-04-19 14:44:46

Jak mam sprawdzić te logi?

ArnVaker · 2014-04-19 14:52:26

Konkretnie Xorg.0.log miałem na myśli. Możesz w trybie awaryjnym go skopiować gdzieś i potem wrzucić, jest też jeszcze wcześniejszy z końcówką .old (ale w tym trybie awaryjnym i tak chyba Xorg nie startuje?). No trochę dłubania, ale bez tego nie wiem czy ktoś będzie wiedział co mu dolega…

Damien · 2014-04-19 14:59:30

No właśnie w trybie awaryjnym gdy chcę go zobaczyć, to jest pusty, a jak wpiszę komendę startx no to już jest czarny ekran i klawiatura nie reaguje na nic, także nie mogę nawet ctrl+alt+F2 zrobić. Sprawdzę ten z końcówką .old za chwilę.

edit: System twierdzi, że nie ma takiego pliku jak xorg.0.log ani xorg.0.log.old.

Ostatnio edytowany przez Damien (2014-04-19 15:01:40)

yossarian · 2014-04-19 15:04:33

X, a nie x.

Damien · 2014-04-19 15:18:01

O lol, mój błąd, przepraszam. :D

No to w takim razie przedstawiam mój Xorg.0.log:

Kod:

[    82.411] 
X.Org X Server 1.15.0.901 (1.15.1 RC 1)
Release Date: 2014-03-21
[    82.411] X Protocol Version 11, Revision 0
[    82.411] Build Operating System: Linux 3.2.0-4-amd64 i686 Debian
[    82.411] Current Operating System: Linux debian 3.13-1-686-pae #1 SMP Debian 3.13.7-1 (2014-03-25) i686
[    82.411] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13-1-686-pae root=UUID=7f5f46e1-228b-48a4-8c99-95dc5d592590 ro single
[    82.412] Build Date: 31 March 2014  12:04:13PM
[    82.413] xorg-server 2:1.15.0.901-1 (http://www.debian.org/support) 
[    82.413] Current version of pixman: 0.32.4
[    82.413]     Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[    82.413] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    82.414] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Apr 19 14:44:17 2014
[    82.503] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    82.504] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    82.557] (==) No Layout section.  Using the first Screen section.
[    82.557] (==) No screen section available. Using defaults.
[    82.557] (**) |-->Screen "Default Screen Section" (0)
[    82.557] (**) |   |-->Monitor "<default monitor>"
[    82.572] (==) No device specified for screen "Default Screen Section".
    Using the first device section listed.
[    82.572] (**) |   |-->Device "My GPU"
[    82.572] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
[    82.573] (==) Automatically adding devices
[    82.573] (==) Automatically enabling devices
[    82.573] (==) Automatically adding GPU devices
[    82.610] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    82.610]     Entry deleted from font path.
[    82.653] (==) FontPath set to:
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/100dpi/:unscaled,
    /usr/share/fonts/X11/75dpi/:unscaled,
    /usr/share/fonts/X11/Type1,
    /usr/share/fonts/X11/100dpi,
    /usr/share/fonts/X11/75dpi,
    built-ins
[    82.653] (==) ModulePath set to "/usr/lib/xorg/modules"
[    82.653] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
[    82.653] (II) Loader magic: 0xb77ca6c0
[    82.653] (II) Module ABI versions:
[    82.653]     X.Org ANSI C Emulation: 0.4
[    82.653]     X.Org Video Driver: 15.0
[    82.653]     X.Org XInput driver : 20.0
[    82.653]     X.Org Server Extension : 8.0
[    82.654] (--) PCI:*(0:1:0:0) 10de:0342:107d:2982 rev 161, Mem @ 0xde000000/16777216, 0xc0000000/268435456, BIOS @ 0x????????/131072
[    82.655] Initializing built-in extension Generic Event Extension
[    82.655] Initializing built-in extension SHAPE
[    82.655] Initializing built-in extension MIT-SHM
[    82.655] Initializing built-in extension XInputExtension
[    82.655] Initializing built-in extension XTEST
[    82.655] Initializing built-in extension BIG-REQUESTS
[    82.655] Initializing built-in extension SYNC
[    82.656] Initializing built-in extension XKEYBOARD
[    82.656] Initializing built-in extension XC-MISC
[    82.656] Initializing built-in extension SECURITY
[    82.656] Initializing built-in extension XINERAMA
[    82.656] Initializing built-in extension XFIXES
[    82.656] Initializing built-in extension RENDER
[    82.656] Initializing built-in extension RANDR
[    82.656] Initializing built-in extension COMPOSITE
[    82.656] Initializing built-in extension DAMAGE
[    82.657] Initializing built-in extension MIT-SCREEN-SAVER
[    82.657] Initializing built-in extension DOUBLE-BUFFER
[    82.657] Initializing built-in extension RECORD
[    82.657] Initializing built-in extension DPMS
[    82.657] Initializing built-in extension Present
[    82.657] Initializing built-in extension DRI3
[    82.657] Initializing built-in extension X-Resource
[    82.657] Initializing built-in extension XVideo
[    82.657] Initializing built-in extension XVideo-MotionCompensation
[    82.658] Initializing built-in extension SELinux
[    82.658] Initializing built-in extension XFree86-VidModeExtension
[    82.658] Initializing built-in extension XFree86-DGA
[    82.658] Initializing built-in extension XFree86-DRI
[    82.658] Initializing built-in extension DRI2
[    82.658] (II) LoadModule: "glx"
[    82.708] (II) Loading /usr/lib/xorg/modules/linux/libglx.so
[    82.838] (II) Module glx: vendor="NVIDIA Corporation"
[    82.839]     compiled for 4.0.2, module version = 1.0.0
[    82.839]     Module class: X.Org Server Extension
[    82.839] (II) NVIDIA GLX Module  173.14.39  Wed Nov 27 15:13:59 PST 2013
[    82.839] Loading extension GLX
[    82.839] (II) LoadModule: "nvidia"
[    82.873] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[    82.943] (II) Module nvidia: vendor="NVIDIA Corporation"
[    82.943]     compiled for 4.0.2, module version = 1.0.0
[    82.943]     Module class: X.Org Video Driver
[    82.956] (II) NVIDIA dlloader X Driver  173.14.39  Wed Nov 27 15:02:30 PST 2013
[    82.956] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    82.956] (--) using VT number 2

[    82.959] (II) Loading sub module "fb"
[    82.959] (II) LoadModule: "fb"
[    82.959] (II) Loading /usr/lib/xorg/modules/libfb.so
[    82.968] (II) Module fb: vendor="X.Org Foundation"
[    82.968]     compiled for 1.15.0.901, module version = 1.0.0
[    82.968]     ABI class: X.Org ANSI C Emulation, version 0.4
[    82.968] (II) Loading sub module "wfb"
[    82.968] (II) LoadModule: "wfb"
[    82.968] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    82.973] (II) Module wfb: vendor="X.Org Foundation"
[    82.973]     compiled for 1.15.0.901, module version = 1.0.0
[    82.973]     ABI class: X.Org ANSI C Emulation, version 0.4
[    82.973] (II) Loading sub module "ramdac"
[    82.973] (II) LoadModule: "ramdac"
[    82.973] (II) Module "ramdac" already built-in
[    82.975] (II) NVIDIA(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
[    82.975] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[    82.975] (==) NVIDIA(0): RGB weight 888
[    82.975] (==) NVIDIA(0): Default visual is TrueColor
[    82.975] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[    82.976] (**) NVIDIA(0): Enabling RENDER acceleration
[    82.976] (II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
[    82.976] (II) NVIDIA(0):     enabled.
[    83.648] (II) NVIDIA(0): NVIDIA GPU GeForce FX 5700 (NV36) at PCI:1:0:0 (GPU-0)
[    83.648] (--) NVIDIA(0): Memory: 131072 kBytes
[    83.648] (--) NVIDIA(0): VideoBIOS: 04.36.20.23.00
[    83.648] (II) NVIDIA(0): Detected AGP rate: 4X
[    83.648] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[    83.648] (--) NVIDIA(0): Connected display device(s) on GeForce FX 5700 at PCI:1:0:0:
[    83.648] (--) NVIDIA(0):     Proview miro P17F86i (CRT-0)
[    83.648] (--) NVIDIA(0): Proview miro P17F86i (CRT-0): 400.0 MHz maximum pixel clock
[    83.649] (II) NVIDIA(0): Assigned Display Device: CRT-0
[    83.649] (==) NVIDIA(0): 
[    83.649] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[    83.649] (==) NVIDIA(0):     will be used as the requested mode.
[    83.649] (==) NVIDIA(0): 
[    83.649] (II) NVIDIA(0): Validated modes:
[    83.649] (II) NVIDIA(0):     "nvidia-auto-select"
[    83.649] (II) NVIDIA(0): Virtual screen size determined to be 1600 x 1200
[    83.651] (--) NVIDIA(0): DPI set to (126, 126); computed from "UseEdidDpi" X config
[    83.651] (--) NVIDIA(0):     option
[    83.651] (==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
[    83.652] (--) Depth 24 pixmap format is 32 bpp
[    83.654] (II) NVIDIA(0): Initialized AGP GART.
[    83.657] (II) NVIDIA(0): Unable to connect to the ACPI daemon; the ACPI daemon may not
[    83.657] (II) NVIDIA(0):     be running or the "AcpidSocketPath" X configuration option
[    83.657] (II) NVIDIA(0):     may not be set correctly.  When the ACPI daemon is
[    83.657] (II) NVIDIA(0):     available, the NVIDIA X driver can use it to receive ACPI
[    83.657] (II) NVIDIA(0):     events.  For details, please see the "ConnectToAcpid" and
[    83.657] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[    83.657] (II) NVIDIA(0):     Config Options in the README.
[    83.657] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[    83.809] Loading extension NV-GLX
[    83.842] (II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
[    83.865] (II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
[    83.865] (==) NVIDIA(0): Backing store enabled
[    83.865] (==) NVIDIA(0): Silken mouse enabled
[    83.867] (==) NVIDIA(0): DPMS enabled
[    83.867] Loading extension NV-CONTROL
[    83.868] (==) RandR enabled
[    83.884] (II) SELinux: Disabled on system
[    83.888] (II) Initializing extension GLX
[    83.888] (EE) 
[    83.888] (EE) Backtrace:
[    83.888] (EE) 0: /usr/bin/X (xorg_backtrace+0x4f) [0xb7742c5f]
[    83.888] (EE) 1: /usr/bin/X (0xb759b000+0x1aba34) [0xb7746a34]
[    83.888] (EE) 2: linux-gate.so.1 (__kernel_rt_sigreturn+0x0) [0xb757940c]
[    83.888] (EE) 3: /usr/lib/xorg/modules/linux/libglx.so (0xb5bb5000+0x1203d5) [0xb5cd53d5]
[    83.888] (EE) 4: /lib/i386-linux-gnu/i686/cmov/libc.so.6 (__libc_start_main+0xf3) [0xb70dca63]
[    83.888] (EE) 
[    83.889] (EE) Segmentation fault at address 0x0
[    83.889] (EE) 
Fatal server error:
[    83.889] (EE) Caught signal 11 (Segmentation fault). Server aborting
[    83.889] (EE) 
[    83.889] (EE) 
Please consult the The X.Org Foundation support 
     at http://wiki.x.org
 for help. 
[    83.889] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[    83.889] (EE)

yossarian · 2014-04-19 17:15:21

Zajrzyj tutaj:
https://devtalk.nvidia.com/default/topic/701493/lin … 0771/#4150771

If I rollback Xorg to the 1.14.5 version, the 173xx driver works fine for me with a 3.13 kernel, that's what I'm using right now.

Ostatnio edytowany przez yossarian (2014-04-19 17:22:30)

Forum Debian Users Gang

Ogłoszenie

#1 2014-04-19 01:11:02

Damien - Użytkownik

GeForce FX 5700 - nie działa pulpit po instalacji sterowników (nvidia)

Kod:

Kod:

Kod:

Kod:

Kod:

Kod:

#2 2014-04-19 04:23:12

ArnVaker - Kapelusznik

Re: GeForce FX 5700 - nie działa pulpit po instalacji sterowników (nvidia)

Kod:

#3 2014-04-19 12:02:12

Damien - Użytkownik

Re: GeForce FX 5700 - nie działa pulpit po instalacji sterowników (nvidia)

#4 2014-04-19 12:11:53

ArnVaker - Kapelusznik

Re: GeForce FX 5700 - nie działa pulpit po instalacji sterowników (nvidia)

#5 2014-04-19 12:32:20

Damien - Użytkownik

Re: GeForce FX 5700 - nie działa pulpit po instalacji sterowników (nvidia)

#6 2014-04-19 12:35:58

ArnVaker - Kapelusznik

Re: GeForce FX 5700 - nie działa pulpit po instalacji sterowników (nvidia)

#7 2014-04-19 14:44:46

Damien - Użytkownik

Re: GeForce FX 5700 - nie działa pulpit po instalacji sterowników (nvidia)

#8 2014-04-19 14:52:26

ArnVaker - Kapelusznik

Re: GeForce FX 5700 - nie działa pulpit po instalacji sterowników (nvidia)

#9 2014-04-19 14:59:30

Damien - Użytkownik

Re: GeForce FX 5700 - nie działa pulpit po instalacji sterowników (nvidia)

#10 2014-04-19 15:04:33

yossarian - Szczawiożerca

Re: GeForce FX 5700 - nie działa pulpit po instalacji sterowników (nvidia)

#11 2014-04-19 15:18:01

Damien - Użytkownik

Re: GeForce FX 5700 - nie działa pulpit po instalacji sterowników (nvidia)

Kod:

#12 2014-04-19 17:15:21

yossarian - Szczawiożerca

Re: GeForce FX 5700 - nie działa pulpit po instalacji sterowników (nvidia)

Stopka forum