Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!

Ogłoszenie

Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.

#1  2014-03-19 17:30:04

  averatec - Użytkownik

averatec
Użytkownik
Zarejestrowany: 2013-10-25

System się samoczynnie "restartuje"

Witam,
Ostatnio mam taki problem ze swoim systemem i nie wiem czy to wina nowego sprzetu czy tez systemu.
Testowalem sprzet takimi programami jak memtest86+, prime95, occt, itd. Wszystkie wyniki byly poprawne.
Mimo to czasem mój debian jessie na kernelu 3.13.1 x64, restartuje sie tak calkiem przypadkowo w /var/log/messages nie ma nic, w /var/log/syslog tez.
Ktoś wie co to może być?
zmienialem socket z 1156 na 1150 ale to nie powinno miec wplywu chyba
stara konfiguracja ramu 2x4 kingston 1600 hyperx
nowa 2x4 kingston 1600 hyperx + 1x4adata gaming 1600

Ostatnio edytowany przez averatec (2014-03-19 17:30:50)

Offline

 

#2  2014-03-19 17:59:33

  marcin'82 - Użytkownik

marcin'82
Użytkownik
Zarejestrowany: 2011-10-02

Re: System się samoczynnie "restartuje"

Sprawdzałeś temperatury podzespołów (pakiet lm-sensors)?

Offline

 

#3  2014-03-19 18:07:29

  averatec - Użytkownik

averatec
Użytkownik
Zarejestrowany: 2013-10-25

Re: System się samoczynnie "restartuje"

temperatury sa ok, procek max 60 w stresie, cala reszta w normie, dyski itd,
obudowa ma dobra wymiane powietrza, siedzi w niej 6 wentyli, procek ma dosyc dobry radiator + wentyl
w pomieszczeniu nie jest jakos specjalnie goraco bo 20-22 stopnie

ciekawe bo to nie wystepuje przy obciazeniu, tylko tak nagle
a probuje wymusic to przy obciazeniu to nie chce bo temperatury sa ok, zasilacz jest w pelni sprawny

Offline

 

#4  2014-03-19 18:07:31

  Yampress - Imperator

Yampress
Imperator
Zarejestrowany: 2007-10-18

Re: System się samoczynnie "restartuje"

A jaki to procesor?

Offline

 

#5  2014-03-19 18:12:07

  averatec - Użytkownik

averatec
Użytkownik
Zarejestrowany: 2013-10-25

Re: System się samoczynnie "restartuje"

i7-4770

jest taka opcja zeby system sie wysypal bez zadnej wiadomosci dlaczego? bo specjalnie czystego windowsa skombinowalem zeby testowac i jak do tej pory na full stresie normalne temperaturki bez problemow

http://3.imgland.net/9fzmuT.png

Ostatnio edytowany przez averatec (2014-03-19 18:26:19)

Offline

 

#6  2014-03-19 18:27:10

  yossarian - Szczawiożerca

yossarian
Szczawiożerca
Skąd: Shangri-La
Zarejestrowany: 2011-04-25

Re: System się samoczynnie "restartuje"

Odłącz te nowe ramki i wtedy sprawdź czy problem występuje.

Offline

 

#7  2014-03-19 18:32:13

  Bitels - Użytkownik

Bitels
Użytkownik
Zarejestrowany: 2012-10-31

Re: System się samoczynnie "restartuje"

"nowa 2x4 kingston 1600 hyperx + 1x4adata gaming 1600" jedyny trop z mojej strony to RAM. Może to tylko przesądy i sam widziałem sprzęty pracujące z kośćmi od różnych producentów prace bez zająknięcia, ale podobno czasami dochodzi do zgrzytów mimo, że nie pracują w dualu. Spróbuj wyciągnąć adatę i zobacz czy będą dalej zwiechy.
Acha jest coś jeszcze. Zmieniałeś procek? A zasilacz masz też nowy? Haswell ma problemy ze starymi zasilaczami, ale nie pamiętam dokładnie o co biega.

Offline

 

#8  2014-03-19 18:36:04

  averatec - Użytkownik

averatec
Użytkownik
Zarejestrowany: 2013-10-25

Re: System się samoczynnie "restartuje"

pewnie chodzi Ci o stany c6 i c7, ale to mam wylaczone w uefi, bo nie mam takiego zasilacza zeby wstrzymanie z tym chodzilo, poza tym nie ma jakis wiekszych zmian jesli chodzi o standard
zasilacz ma moze 2 lata albo nawet nie


Co do tych ramow to na razie zostawie jeszcze test na windzie tak do 8h~ a pozniej wroce na debiana i zobacze, bo moze byly to tylko skoki napiecia, bo dosyc wietrzny dzien byl wczoraj i przedwczoraj, ale reki nie dam sobie uciac, bo nigdy nie mialem takich problemow kilka dni z rzedu

Ostatnio edytowany przez averatec (2014-03-19 18:36:59)

Offline

 

#9  2014-03-19 18:49:42

  lis6502 - Łowca lamerów

lis6502
Łowca lamerów
Skąd: Stalinogród
Zarejestrowany: 2008-12-04

Re: System się samoczynnie "restartuje"

Jaka moc i marka zasilacza?

Offline

 

#10  2014-03-19 18:50:29

  Yampress - Imperator

Yampress
Imperator
Zarejestrowany: 2007-10-18

Re: System się samoczynnie "restartuje"

A czy przypadkie te i7 nie były strasznie grzejące się? i nie jechały często do serwisu. Przypomniało mi się, że ktoś coś tu takiego pisał

Offline

 

#11  2014-03-19 18:54:23

  averatec - Użytkownik

averatec
Użytkownik
Zarejestrowany: 2013-10-25

Re: System się samoczynnie "restartuje"

Yampress napisał(-a):

A czy przypadkie te i7 nie były strasznie grzejące się? i nie jechały często do serwisu. Przypomniało mi się, że ktoś coś tu takiego pisał

a widzisz temperaturke? ;p

zasilacz: Aerocool E80-500 (500W) 80+ (AEROE80-500)

Ostatnio edytowany przez averatec (2014-03-19 18:55:32)

Offline

 

#12  2014-03-20 21:36:22

  averatec - Użytkownik

averatec
Użytkownik
Zarejestrowany: 2013-10-25

Re: System się samoczynnie "restartuje"

no i sprawa wyglada tak, na windowsie wczoraj sie nie wysypal
a na debianie dzisiaj tak, strasznie to dziwne... bo na debianie nie obciazalem go dzisiaj nawet

ostatnie linijki z syslog z przed restartu:

Kod:

Mar 20 16:47:30 hell kernel: [   37.609646] warning: `VirtualBox' uses 32-bit capabilities (legacy support in use)
Mar 20 16:47:30 hell dbus[2414]: [system] Activating service name='org.freedesktop.UDisks2' (using servicehelper)
Mar 20 16:47:31 hell udisksd[3286]: udisks daemon version 2.1.3 starting
Mar 20 16:47:31 hell dbus[2414]: [system] Successfully activated service 'org.freedesktop.UDisks2'
Mar 20 16:47:31 hell udisksd[3286]: Acquired the name org.freedesktop.UDisks2 on the system message bus
Mar 20 16:47:31 hell udisksd[3286]: Cleaning up mount point /media/kamil/Working Space (device 8:38 no longer exist)
Mar 20 16:47:31 hell udisksd[3286]: Error cleaning up mount point /media/kamil/Working Space: Error removing directory: Device or resource busy
Mar 20 16:47:37 hell kernel: [   44.166005] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
Mar 20 16:47:46 hell kernel: [   53.436451] traps: VirtualBox[3191] general protection ip:7f0f79b49896 sp:7fff4bdf5b70 error:0 in libc-2.18.so[7f0f79acd000+1a0000]
Mar 20 17:09:01 hell /USR/SBIN/CRON[8555]: (root) CMD (  [ -x /usr/lib/php5/maxlifetime ] && [ -x /usr/lib/php5/sessionclean ] && [ -d /var/lib/php5 ] && /usr/lib/php5/sessionclean /var/lib/php5 $(/usr/lib/php5/maxlifetime))
Mar 20 17:17:01 hell /USR/SBIN/CRON[10391]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
Mar 20 17:36:15 hell kernel: [ 2960.711682] perf samples too long (2502 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
Mar 20 17:39:01 hell /USR/SBIN/CRON[15166]: (root) CMD (  [ -x /usr/lib/php5/maxlifetime ] && [ -x /usr/lib/php5/sessionclean ] && [ -d /var/lib/php5 ] && /usr/lib/php5/sessionclean /var/lib/php5 $(/usr/lib/php5/maxlifetime))
Mar 20 18:09:01 hell /USR/SBIN/CRON[22814]: (root) CMD (  [ -x /usr/lib/php5/maxlifetime ] && [ -x /usr/lib/php5/sessionclean ] && [ -d /var/lib/php5 ] && /usr/lib/php5/sessionclean /var/lib/php5 $(/usr/lib/php5/maxlifetime))
Mar 20 18:17:01 hell /USR/SBIN/CRON[25369]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
Mar 20 18:39:01 hell /USR/SBIN/CRON[31512]: (root) CMD (  [ -x /usr/lib/php5/maxlifetime ] && [ -x /usr/lib/php5/sessionclean ] && [ -d /var/lib/php5 ] && /usr/lib/php5/sessionclean /var/lib/php5 $(/usr/lib/php5/maxlifetime))
Mar 20 19:09:01 hell /USR/SBIN/CRON[6841]: (root) CMD (  [ -x /usr/lib/php5/maxlifetime ] && [ -x /usr/lib/php5/sessionclean ] && [ -d /var/lib/php5 ] && /usr/lib/php5/sessionclean /var/lib/php5 $(/usr/lib/php5/maxlifetime))
Mar 20 19:17:01 hell /USR/SBIN/CRON[8488]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
Mar 20 19:39:01 hell /USR/SBIN/CRON[13460]: (root) CMD (  [ -x /usr/lib/php5/maxlifetime ] && [ -x /usr/lib/php5/sessionclean ] && [ -d /var/lib/php5 ] && /usr/lib/php5/sessionclean /var/lib/php5 $(/usr/lib/php5/maxlifetime))
Mar 20 20:09:01 hell /USR/SBIN/CRON[20317]: (root) CMD (  [ -x /usr/lib/php5/maxlifetime ] && [ -x /usr/lib/php5/sessionclean ] && [ -d /var/lib/php5 ] && /usr/lib/php5/sessionclean /var/lib/php5 $(/usr/lib/php5/maxlifetime))
Mar 20 20:17:01 hell /USR/SBIN/CRON[22157]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
Mar 20 20:39:01 hell /USR/SBIN/CRON[27668]: (root) CMD (  [ -x /usr/lib/php5/maxlifetime ] && [ -x /usr/lib/php5/sessionclean ] && [ -d /var/lib/php5 ] && /usr/lib/php5/sessionclean /var/lib/php5 $(/usr/lib/php5/maxlifetime))
Mar 20 21:09:01 hell /USR/SBIN/CRON[3260]: (root) CMD (  [ -x /usr/lib/php5/maxlifetime ] && [ -x /usr/lib/php5/sessionclean ] && [ -d /var/lib/php5 ] && /usr/lib/php5/sessionclean /var/lib/php5 $(/usr/lib/php5/maxlifetime))
Mar 20 21:17:01 hell /USR/SBIN/CRON[5280]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
Mar 20 21:28:31 hell rsyslogd: [origin software="rsyslogd" swVersion="7.4.8" x-pid="2110" x-info="http://www.rsyslog.com"] start
Mar 20 21:28:31 hell rsyslogd-2181: $WorkDirectory: /var/spool/rsyslog can not be accessed, probably does not exist - directive ignored [try http://www.rsyslog.com/e/2181 ]
Mar 20 21:28:31 hell kernel: [    0.000000] Initializing cgroup subsys cpuset
Mar 20 21:28:31 hell kernel: [    0.000000] Initializing cgroup subsys cpu
Mar 20 21:28:31 hell kernel: [    0.000000] Initializing cgroup subsys cpuacct
Mar 20 21:28:31 hell kernel: [    0.000000] Linux version 3.13-1-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.2 (Debian 4.8.2-14) ) #1 SMP Debian 3.13.5-1 (2014-03-04)
Mar 20 21:28:31 hell kernel: [    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.13-1-amd64 root=UUID=a100fcfd-569f-4f71-b2a9-52dfc7dbf7ef ro quiet
Mar 20 21:28:31 hell kernel: [    0.000000] e820: BIOS-provided physical RAM map:

a w messages nie ma kompletnie nic...

Ostatnio edytowany przez averatec (2014-03-20 21:43:18)

Offline

 

#13  2014-03-20 21:56:05

  Bitels - Użytkownik

Bitels
Użytkownik
Zarejestrowany: 2012-10-31

Re: System się samoczynnie "restartuje"

próbowałeś na innym jaju? może faktycznie coś jest uwalone... spróbuj może na jakimś live cd zobaczyć czy ta sytuacja się powtarza.

Offline

 

#14  2014-03-20 22:48:12

  yossarian - Szczawiożerca

yossarian
Szczawiożerca
Skąd: Shangri-La
Zarejestrowany: 2011-04-25

Re: System się samoczynnie "restartuje"

Zamiast kombinować na slepo po prostu sprawdź czy to nie ten RAM.

Offline

 

#15  2014-03-20 23:04:40

  averatec - Użytkownik

averatec
Użytkownik
Zarejestrowany: 2013-10-25

Re: System się samoczynnie "restartuje"

yossarian napisał(-a):

Zamiast kombinować na slepo po prostu sprawdź czy to nie ten RAM.

ok, tylko wydaje mi sie ze w takim przypadku memtest86+ po 6 godzinach testow powinien wypluc jakis problem

Offline

 

#16  2014-03-21 08:15:26

  lukaz1987 - Członek DUG

lukaz1987
Członek DUG
Zarejestrowany: 2008-08-12

Re: System się samoczynnie "restartuje"

Jak masz inny działający zasilacz to sprawdź czy to nie jest problem z zasilaniem. Ostatnio miałem podobny przypadek z tą różnicą że w terminale HP T5720. Po wymianie zasilacza system przestał się restatować.

Offline

 

#17  2014-03-21 15:22:58

  averatec - Użytkownik

averatec
Użytkownik
Zarejestrowany: 2013-10-25

Re: System się samoczynnie "restartuje"

wypialem ram adata(AX3U1600GC4G9-2G)
zostaly dwie kosci kingoston(KHX1600C9D3X2K2/8GX)

#edit:
po usunieciu kosci adata, system zachowuje sie stabilnie, mozliwe ze byly zle czasy ustawione w uefi, wloze jutro te kosc i ustawie tak jak trzeba i mam nadzieje ze bedzie dzialac

Ostatnio edytowany przez averatec (2014-03-21 22:55:34)

Offline

 

#18  2014-03-22 14:49:31

  averatec - Użytkownik

averatec
Użytkownik
Zarejestrowany: 2013-10-25

Re: System się samoczynnie "restartuje"

dalej ten sam problem, na windowsie nic, na linuxie raz sie wywali a raz nie...
no i w /var/log/debug caly czas:

Kod:

DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./Z87 Extreme6, BIOS P2.30 12/26/2013

/var/log/dmesg

Kod:

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.13-1-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.2 (Debian 4.8.2-14) ) #1 SMP Debian 3.13.5-1 (2014-03-04)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.13-1-amd64 root=UUID=a100fcfd-569f-4f71-b2a9-52dfc7dbf7ef ro quiet
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b7f02fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000b7f03000-0x00000000b7f09fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000b7f0a000-0x00000000b8b19fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000b8b1a000-0x00000000b9022fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b9023000-0x00000000cbe9dfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cbe9e000-0x00000000cc0a3fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000cc0a4000-0x00000000cc0e2fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cc0e3000-0x00000000cc18ffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000cc190000-0x00000000ccffefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ccfff000-0x00000000ccffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cf800000-0x00000000df9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021f5fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./Z87 Extreme6, BIOS P2.30 12/26/2013
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0x21f600 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-E7FFF uncachable
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask 7E00000000 write-back
[    0.000000]   1 base 0200000000 mask 7FE0000000 write-back
[    0.000000]   2 base 00E0000000 mask 7FE0000000 uncachable
[    0.000000]   3 base 00D0000000 mask 7FF0000000 uncachable
[    0.000000]   4 base 00CF800000 mask 7FFF800000 uncachable
[    0.000000]   5 base 021F800000 mask 7FFF800000 uncachable
[    0.000000]   6 base 021F600000 mask 7FFFE00000 uncachable
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: update [mem 0xcf800000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xcd000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fd7c0-0x000fd7cf] mapped at [ffff8800000fd7c0]
[    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01a9b000, 0x01a9bfff] PGTABLE
[    0.000000] BRK [0x01a9c000, 0x01a9cfff] PGTABLE
[    0.000000] BRK [0x01a9d000, 0x01a9dfff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x21f400000-0x21f5fffff]
[    0.000000]  [mem 0x21f400000-0x21f5fffff] page 2M
[    0.000000] BRK [0x01a9e000, 0x01a9efff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x21c000000-0x21f3fffff]
[    0.000000]  [mem 0x21c000000-0x21f3fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x200000000-0x21bffffff]
[    0.000000]  [mem 0x200000000-0x21bffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0xb7f02fff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x3fffffff] page 2M
[    0.000000]  [mem 0x40000000-0x7fffffff] page 1G
[    0.000000]  [mem 0x80000000-0xb7dfffff] page 2M
[    0.000000]  [mem 0xb7e00000-0xb7f02fff] page 4k
[    0.000000] init_memory_mapping: [mem 0xb7f0a000-0xb8b19fff]
[    0.000000]  [mem 0xb7f0a000-0xb7ffffff] page 4k
[    0.000000]  [mem 0xb8000000-0xb89fffff] page 2M
[    0.000000]  [mem 0xb8a00000-0xb8b19fff] page 4k
[    0.000000] BRK [0x01a9f000, 0x01a9ffff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0xb9023000-0xcbe9dfff]
[    0.000000]  [mem 0xb9023000-0xb91fffff] page 4k
[    0.000000]  [mem 0xb9200000-0xcbdfffff] page 2M
[    0.000000]  [mem 0xcbe00000-0xcbe9dfff] page 4k
[    0.000000] BRK [0x01aa0000, 0x01aa0fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0xcc0a4000-0xcc0e2fff]
[    0.000000]  [mem 0xcc0a4000-0xcc0e2fff] page 4k
[    0.000000] init_memory_mapping: [mem 0xccfff000-0xccffffff]
[    0.000000]  [mem 0xccfff000-0xccffffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[    0.000000]  [mem 0x100000000-0x1ffffffff] page 1G
[    0.000000] RAMDISK: [mem 0x366b6000-0x37352fff]
[    0.000000] ACPI: RSDP 00000000000f0490 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 00000000cc16b080 000084 (v01 ALASKA    A M I 01072009 AMI  00010013)
[    0.000000] ACPI: FACP 00000000cc175c00 00010C (v05 ALASKA    A M I 01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 00000000cc16b1a0 00AA59 (v02 ALASKA    A M I 00000230 INTL 20091112)
[    0.000000] ACPI: FACS 00000000cc18e080 000040
[    0.000000] ACPI: APIC 00000000cc175d10 000092 (v03 ALASKA    A M I 01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 00000000cc175da8 000044 (v01 ALASKA    A M I 01072009 AMI  00010013)
[    0.000000] ACPI: ASF! 00000000cc175df0 0000A5 (v32 INTEL       HCG 00000001 TFSM 000F4240)
[    0.000000] ACPI: SSDT 00000000cc175e98 000539 (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
[    0.000000] ACPI: SSDT 00000000cc1763d8 000AD8 (v01  PmRef    CpuPm 00003000 INTL 20051117)
[    0.000000] ACPI: MCFG 00000000cc176eb0 00003C (v01 ALASKA    A M I 01072009 MSFT 00000097)
[    0.000000] ACPI: HPET 00000000cc176ef0 000038 (v01 ALASKA    A M I 01072009 AMI. 00000005)
[    0.000000] ACPI: SSDT 00000000cc176f28 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
[    0.000000] ACPI: SSDT 00000000cc177298 003493 (v01 SaSsdt  SaSsdt  00003000 INTL 20091112)
[    0.000000] ACPI: AAFT 00000000cc17a730 0002E3 (v01 ALASKA OEMAAFT  01072009 MSFT 00000097)
[    0.000000] ACPI: SSDT 00000000cc17aa18 000803 (v01 Intel_ IsctTabl 00001000 INTL 20091112)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000021f5fffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x21f5fffff]
[    0.000000]   NODE_DATA [mem 0x21f5f5000-0x21f5f9fff]
[    0.000000]  [ffffea0000000000-ffffea00077fffff] PMD -> [ffff880217000000-ffff88021ddfffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x21f5fffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009cfff]
[    0.000000]   node   0: [mem 0x00100000-0xb7f02fff]
[    0.000000]   node   0: [mem 0xb7f0a000-0xb8b19fff]
[    0.000000]   node   0: [mem 0xb9023000-0xcbe9dfff]
[    0.000000]   node   0: [mem 0xcc0a4000-0xcc0e2fff]
[    0.000000]   node   0: [mem 0xccfff000-0xccffffff]
[    0.000000]   node   0: [mem 0x100000000-0x21f5fffff]
[    0.000000] On node 0 totalpages: 2010986
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 11347 pages used for memmap
[    0.000000]   DMA32 zone: 829902 pages, LIFO batch:31
[    0.000000]   Normal zone: 16093 pages used for memmap
[    0.000000]   Normal zone: 1177088 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xb7f03000-0xb7f09fff]
[    0.000000] PM: Registered nosave memory: [mem 0xb8b1a000-0xb9022fff]
[    0.000000] PM: Registered nosave memory: [mem 0xcbe9e000-0xcc0a3fff]
[    0.000000] PM: Registered nosave memory: [mem 0xcc0e3000-0xcc18ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcc190000-0xccffefff]
[    0.000000] PM: Registered nosave memory: [mem 0xcd000000-0xcf7fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcf800000-0xdf9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff88021f200000 s85824 r8192 d20672 u262144
[    0.000000] pcpu-alloc: s85824 r8192 d20672 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1983469
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13-1-amd64 root=UUID=a100fcfd-569f-4f71-b2a9-52dfc7dbf7ef ro quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 7840176K/8043944K available (4807K kernel code, 693K rwdata, 1620K rodata, 988K init, 952K bss, 203768K reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000]     RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000]     RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[    0.000000] NR_IRQS:33024 nr_irqs:744 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.004000] tsc: Detected 3399.050 MHz processor
[    0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 6798.10 BogoMIPS (lpj=13596200)
[    0.000003] pid_max: default: 32768 minimum: 301
[    0.000018] Security Framework initialized
[    0.000021] AppArmor: AppArmor disabled by boot time parameter
[    0.000021] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.000309] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.001360] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.001816] Mount-cache hash table entries: 256
[    0.001922] Initializing cgroup subsys memory
[    0.001926] Initializing cgroup subsys devices
[    0.001927] Initializing cgroup subsys freezer
[    0.001927] Initializing cgroup subsys blkio
[    0.001928] Initializing cgroup subsys perf_event
[    0.001946] CPU: Physical Processor ID: 0
[    0.001946] CPU: Processor Core ID: 0
[    0.002681] mce: CPU supports 9 MCE banks
[    0.002692] CPU0: Thermal monitoring enabled (TM1)
[    0.002701] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.002701] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0
[    0.002701] tlb_flushall_shift: 6
[    0.002763] Freeing SMP alternatives memory: 20K (ffffffff819a6000 - ffffffff819ab000)
[    0.003351] ACPI: Core revision 20131115
[    0.008070] ACPI: All ACPI Tables successfully acquired
[    0.009746] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.049395] smpboot: CPU0: Intel(R) Core(TM) i7-4770 CPU @ 3.40GHz (fam: 06, model: 3c, stepping: 03)
[    0.049400] TSC deadline timer enabled
[    0.049405] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
[    0.049409] ... version:                3
[    0.049410] ... bit width:              48
[    0.049410] ... generic registers:      4
[    0.049411] ... value mask:             0000ffffffffffff
[    0.049411] ... max period:             0000ffffffffffff
[    0.049412] ... fixed-purpose events:   3
[    0.049412] ... event mask:             000000070000000f
[    0.049593] x86: Booting SMP configuration:
[    0.063454] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.049594] .... node  #0, CPUs:      #1 #2 #3 #4 #5 #6 #7
[    0.146827] x86: Booted up 1 node, 8 CPUs
[    0.146830] smpboot: Total of 8 processors activated (54384.80 BogoMIPS)
[    0.153157] devtmpfs: initialized
[    0.154632] PM: Registering ACPI NVS region [mem 0xb7f03000-0xb7f09fff] (28672 bytes)
[    0.154634] PM: Registering ACPI NVS region [mem 0xcc0e3000-0xcc18ffff] (708608 bytes)
[    0.154747] NET: Registered protocol family 16
[    0.154795] cpuidle: using governor ladder
[    0.154796] cpuidle: using governor menu
[    0.154812] ACPI: bus type PCI registered
[    0.154814] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.154860] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.154862] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.159008] PCI: Using configuration type 1 for base access
[    0.159423] bio: create slab <bio-0> at 0
[    0.159504] ACPI: Added _OSI(Module Device)
[    0.159505] ACPI: Added _OSI(Processor Device)
[    0.159505] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.159506] ACPI: Added _OSI(Processor Aggregator Device)
[    0.161651] ACPI: Executed 1 blocks of module-level executable AML code
[    0.163206] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.173129] ACPI: SSDT 00000000cc099618 0005AA (v01  PmRef    ApIst 00003000 INTL 20051117)
[    0.173433] ACPI: Dynamic OEM Table Load:
[    0.173434] ACPI: SSDT           (null) 0005AA (v01  PmRef    ApIst 00003000 INTL 20051117)
[    0.185777] ACPI: Interpreter enabled
[    0.185782] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
[    0.185786] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[    0.185795] ACPI: (supports S0 S3 S4 S5)
[    0.185796] ACPI: Using IOAPIC for interrupt routing
[    0.185833] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.185945] ACPI: No dock devices found.
[    0.191636] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.191640] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.191780] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[    0.191869] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[    0.192236] PCI host bridge to bus 0000:00
[    0.192238] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.192239] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.192240] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.192241] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.192242] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[    0.192242] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[    0.192243] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[    0.192244] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[    0.192245] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[    0.192246] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[    0.192247] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff]
[    0.192251] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
[    0.192308] pci 0000:00:02.0: [8086:0412] type 00 class 0x030000
[    0.192315] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit]
[    0.192319] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.192322] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.192373] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
[    0.192378] pci 0000:00:03.0: reg 0x10: [mem 0xf0734000-0xf0737fff 64bit]
[    0.192448] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[    0.192463] pci 0000:00:14.0: reg 0x10: [mem 0xf0720000-0xf072ffff 64bit]
[    0.192513] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.192542] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.192562] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[    0.192577] pci 0000:00:16.0: reg 0x10: [mem 0xf073f000-0xf073f00f 64bit]
[    0.192630] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.192683] pci 0000:00:19.0: [8086:153b] type 00 class 0x020000
[    0.192696] pci 0000:00:19.0: reg 0x10: [mem 0xf0700000-0xf071ffff]
[    0.192703] pci 0000:00:19.0: reg 0x14: [mem 0xf073d000-0xf073dfff]
[    0.192709] pci 0000:00:19.0: reg 0x18: [io  0xf080-0xf09f]
[    0.192758] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.192789] pci 0000:00:19.0: System wakeup disabled by ACPI
[    0.192811] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[    0.192827] pci 0000:00:1a.0: reg 0x10: [mem 0xf073c000-0xf073c3ff]
[    0.192902] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.192942] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.192963] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[    0.192975] pci 0000:00:1b.0: reg 0x10: [mem 0xf0730000-0xf0733fff 64bit]
[    0.193030] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.193061] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.193079] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[    0.193132] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.193165] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.193184] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
[    0.193236] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.193269] pci 0000:00:1c.2: System wakeup disabled by ACPI
[    0.193287] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400
[    0.193339] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.193372] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    0.193389] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400
[    0.193442] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.193475] pci 0000:00:1c.4: System wakeup disabled by ACPI
[    0.193499] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[    0.193516] pci 0000:00:1d.0: reg 0x10: [mem 0xf073b000-0xf073b3ff]
[    0.193590] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.193630] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.193651] pci 0000:00:1f.0: [8086:8c44] type 00 class 0x060100
[    0.193784] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
[    0.193797] pci 0000:00:1f.2: reg 0x10: [io  0xf0d0-0xf0d7]
[    0.193802] pci 0000:00:1f.2: reg 0x14: [io  0xf0c0-0xf0c3]
[    0.193808] pci 0000:00:1f.2: reg 0x18: [io  0xf0b0-0xf0b7]
[    0.193814] pci 0000:00:1f.2: reg 0x1c: [io  0xf0a0-0xf0a3]
[    0.193819] pci 0000:00:1f.2: reg 0x20: [io  0xf060-0xf07f]
[    0.193825] pci 0000:00:1f.2: reg 0x24: [mem 0xf073a000-0xf073a7ff]
[    0.193855] pci 0000:00:1f.2: PME# supported from D3hot
[    0.193897] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[    0.193909] pci 0000:00:1f.3: reg 0x10: [mem 0xf0739000-0xf07390ff 64bit]
[    0.193925] pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]
[    0.194010] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.194064] pci 0000:02:00.0: [1b21:0612] type 00 class 0x010601
[    0.194077] pci 0000:02:00.0: reg 0x10: [io  0xe050-0xe057]
[    0.194087] pci 0000:02:00.0: reg 0x14: [io  0xe040-0xe043]
[    0.194096] pci 0000:02:00.0: reg 0x18: [io  0xe030-0xe037]
[    0.194106] pci 0000:02:00.0: reg 0x1c: [io  0xe020-0xe023]
[    0.194115] pci 0000:02:00.0: reg 0x20: [io  0xe000-0xe01f]
[    0.194125] pci 0000:02:00.0: reg 0x24: [mem 0xf0600000-0xf06001ff]
[    0.200983] pci 0000:00:1c.2: PCI bridge to [bus 02]
[    0.200985] pci 0000:00:1c.2:   bridge window [io  0xe000-0xefff]
[    0.200988] pci 0000:00:1c.2:   bridge window [mem 0xf0600000-0xf06fffff]
[    0.201053] pci 0000:03:00.0: [8086:1539] type 00 class 0x020000
[    0.201076] pci 0000:03:00.0: reg 0x10: [mem 0xf0500000-0xf051ffff]
[    0.201107] pci 0000:03:00.0: reg 0x18: [io  0xd000-0xd01f]
[    0.201123] pci 0000:03:00.0: reg 0x1c: [mem 0xf0520000-0xf0523fff]
[    0.201259] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[    0.210219] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    0.210222] pci 0000:00:1c.3:   bridge window [io  0xd000-0xdfff]
[    0.210224] pci 0000:00:1c.3:   bridge window [mem 0xf0500000-0xf05fffff]
[    0.210276] pci 0000:04:00.0: [1b21:0612] type 00 class 0x010601
[    0.210289] pci 0000:04:00.0: reg 0x10: [io  0xc050-0xc057]
[    0.210299] pci 0000:04:00.0: reg 0x14: [io  0xc040-0xc043]
[    0.210309] pci 0000:04:00.0: reg 0x18: [io  0xc030-0xc037]
[    0.210318] pci 0000:04:00.0: reg 0x1c: [io  0xc020-0xc023]
[    0.210328] pci 0000:04:00.0: reg 0x20: [io  0xc000-0xc01f]
[    0.210337] pci 0000:04:00.0: reg 0x24: [mem 0xf0400000-0xf04001ff]
[    0.218210] pci 0000:00:1c.4: PCI bridge to [bus 04]
[    0.218212] pci 0000:00:1c.4:   bridge window [io  0xc000-0xcfff]
[    0.218214] pci 0000:00:1c.4:   bridge window [mem 0xf0400000-0xf04fffff]
[    0.218745] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.218776] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.218805] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.218835] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.218864] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15)
[    0.218892] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.218921] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
[    0.218950] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.219175] ACPI: Enabled 5 GPEs in block 00 to 3F
[    0.219179] ACPI: \_SB_.PCI0: notify handler is installed
[    0.219216] Found 1 acpi root devices
[    0.219255] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.219257] vgaarb: loaded
[    0.219258] vgaarb: bridge control possible 0000:00:02.0
[    0.219278] PCI: Using ACPI for IRQ routing
[    0.220450] PCI: pci_cache_line_size set to 64 bytes
[    0.220488] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[    0.220489] e820: reserve RAM buffer [mem 0xb7f03000-0xb7ffffff]
[    0.220490] e820: reserve RAM buffer [mem 0xb8b1a000-0xbbffffff]
[    0.220491] e820: reserve RAM buffer [mem 0xcbe9e000-0xcbffffff]
[    0.220492] e820: reserve RAM buffer [mem 0xcc0e3000-0xcfffffff]
[    0.220493] e820: reserve RAM buffer [mem 0xcd000000-0xcfffffff]
[    0.220493] e820: reserve RAM buffer [mem 0x21f600000-0x21fffffff]
[    0.220547] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.220550] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.222565] Switched to clocksource hpet
[    0.223469] pnp: PnP ACPI init
[    0.223474] ACPI: bus type PNP registered
[    0.223509] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.223510] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.223517] pnp 00:01: [dma 4]
[    0.223524] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.223535] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[    0.223589] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.223658] system 00:04: [io  0x0680-0x069f] has been reserved
[    0.223660] system 00:04: [io  0xffff] has been reserved
[    0.223661] system 00:04: [io  0xffff] has been reserved
[    0.223662] system 00:04: [io  0xffff] has been reserved
[    0.223663] system 00:04: [io  0x1c00-0x1cfe] has been reserved
[    0.223664] system 00:04: [io  0x1d00-0x1dfe] has been reserved
[    0.223665] system 00:04: [io  0x1e00-0x1efe] has been reserved
[    0.223666] system 00:04: [io  0x1f00-0x1ffe] has been reserved
[    0.223667] system 00:04: [io  0x1800-0x18fe] could not be reserved
[    0.223668] system 00:04: [io  0x164e-0x164f] has been reserved
[    0.223669] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.223683] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.223707] system 00:06: [io  0x1854-0x1857] has been reserved
[    0.223708] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.223750] system 00:07: [io  0x0290-0x029f] has been reserved
[    0.223751] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.223870] system 00:08: [io  0x04d0-0x04d1] has been reserved
[    0.223872] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.223885] pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.223975] pnp 00:0a: [dma 0 disabled]
[    0.223999] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.224250] system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.224251] system 00:0b: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.224252] system 00:0b: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.224253] system 00:0b: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.224255] system 00:0b: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.224256] system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.224257] system 00:0b: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.224258] system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.224259] system 00:0b: [mem 0xff000000-0xffffffff] has been reserved
[    0.224260] system 00:0b: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.224261] system 00:0b: [mem 0xf7fef000-0xf7feffff] has been reserved
[    0.224263] system 00:0b: [mem 0xf7ff0000-0xf7ff0fff] has been reserved
[    0.224264] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.224418] pnp: PnP ACPI: found 12 devices
[    0.224419] ACPI: bus type PNP unregistered
[    0.229768] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.229776] pci 0000:00:1c.2: PCI bridge to [bus 02]
[    0.229778] pci 0000:00:1c.2:   bridge window [io  0xe000-0xefff]
[    0.229781] pci 0000:00:1c.2:   bridge window [mem 0xf0600000-0xf06fffff]
[    0.229786] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    0.229788] pci 0000:00:1c.3:   bridge window [io  0xd000-0xdfff]
[    0.229791] pci 0000:00:1c.3:   bridge window [mem 0xf0500000-0xf05fffff]
[    0.229796] pci 0000:00:1c.4: PCI bridge to [bus 04]
[    0.229798] pci 0000:00:1c.4:   bridge window [io  0xc000-0xcfff]
[    0.229801] pci 0000:00:1c.4:   bridge window [mem 0xf0400000-0xf04fffff]
[    0.229807] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.229808] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.229809] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.229810] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[    0.229810] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[    0.229811] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[    0.229812] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[    0.229813] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
[    0.229814] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
[    0.229815] pci_bus 0000:00: resource 13 [mem 0xdfa00000-0xfeafffff]
[    0.229816] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.229817] pci_bus 0000:02: resource 1 [mem 0xf0600000-0xf06fffff]
[    0.229818] pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
[    0.229818] pci_bus 0000:03: resource 1 [mem 0xf0500000-0xf05fffff]
[    0.229819] pci_bus 0000:04: resource 0 [io  0xc000-0xcfff]
[    0.229820] pci_bus 0000:04: resource 1 [mem 0xf0400000-0xf04fffff]
[    0.229882] NET: Registered protocol family 2
[    0.230027] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.230114] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.230201] TCP: Hash tables configured (established 65536 bind 65536)
[    0.230209] TCP: reno registered
[    0.230216] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.230235] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.230299] NET: Registered protocol family 1
[    0.230306] pci 0000:00:02.0: Boot video device
[    0.270577] PCI: CLS 64 bytes, default 64
[    0.270600] Unpacking initramfs...
[    0.420498] Freeing initrd memory: 12916K (ffff8800366b6000 - ffff880037353000)
[    0.420502] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.420504] software IO TLB [mem 0xc7e9e000-0xcbe9e000] (64MB) mapped at [ffff8800c7e9e000-ffff8800cbe9dfff]
[    0.420671] microcode: CPU0 sig=0x306c3, pf=0x2, revision=0x17
[    0.420676] microcode: CPU1 sig=0x306c3, pf=0x2, revision=0x17
[    0.420680] microcode: CPU2 sig=0x306c3, pf=0x2, revision=0x17
[    0.420685] microcode: CPU3 sig=0x306c3, pf=0x2, revision=0x17
[    0.420689] microcode: CPU4 sig=0x306c3, pf=0x2, revision=0x17
[    0.420693] microcode: CPU5 sig=0x306c3, pf=0x2, revision=0x17
[    0.420697] microcode: CPU6 sig=0x306c3, pf=0x2, revision=0x17
[    0.420701] microcode: CPU7 sig=0x306c3, pf=0x2, revision=0x17
[    0.420731] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.420903] audit: initializing netlink socket (disabled)
[    0.420910] type=2000 audit(1395497642.408:1): initialized
[    0.429469] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.429877] VFS: Disk quotas dquot_6.5.2
[    0.429897] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.429947] msgmni has been set to 15338
[    0.430144] alg: No test for stdrng (krng)
[    0.430163] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.430193] io scheduler noop registered
[    0.430194] io scheduler deadline registered
[    0.430212] io scheduler cfq registered (default)
[    0.430543] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.430551] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.430568] intel_idle: MWAIT substates: 0x42120
[    0.430568] intel_idle: v0.4 model 0x3C
[    0.430569] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.430690] GHES: HEST is not enabled!
[    0.430724] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.451069] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.451283] Linux agpgart interface v0.103
[    0.451335] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    0.454103] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.454105] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.454163] mousedev: PS/2 mouse device common for all mice
[    0.454186] rtc_cmos 00:05: RTC can wake from S4
[    0.454279] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    0.454301] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.454307] Intel P-state driver initializing.
[    0.454314] Intel pstate controlling: cpu 0
[    0.454322] Intel pstate controlling: cpu 1
[    0.454327] Intel pstate controlling: cpu 2
[    0.454333] Intel pstate controlling: cpu 3
[    0.454339] Intel pstate controlling: cpu 4
[    0.454347] Intel pstate controlling: cpu 5
[    0.454353] Intel pstate controlling: cpu 6
[    0.454359] Intel pstate controlling: cpu 7
[    0.454379] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[    0.454380] AMD IOMMUv2 functionality not available on this system
[    0.454443] TCP: cubic registered
[    0.454545] NET: Registered protocol family 10
[    0.454676] mip6: Mobile IPv6
[    0.454677] NET: Registered protocol family 17
[    0.454679] mpls_gso: MPLS GSO support
[    0.454847] registered taskstats version 1
[    0.455378] rtc_cmos 00:05: setting system clock to 2014-03-22 14:14:02 UTC (1395497642)
[    0.455402] PM: Hibernation image not present or could not be loaded.
[    0.455769] Freeing unused kernel memory: 988K (ffffffff818af000 - ffffffff819a6000)
[    0.455770] Write protecting the kernel read-only data: 8192k
[    0.457579] Freeing unused kernel memory: 1328K (ffff8800014b4000 - ffff880001600000)
[    0.458153] Freeing unused kernel memory: 428K (ffff880001795000 - ffff880001800000)
[    0.463965] systemd-udevd[86]: starting version 204
[    0.473866] pps_core: LinuxPPS API ver. 1 registered
[    0.473871] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.474008] PTP clock support registered
[    0.474538] dca service started, version 1.12.1
[    0.474811] ACPI: bus type USB registered
[    0.474834] usbcore: registered new interface driver usbfs
[    0.474841] usbcore: registered new interface driver hub
[    0.474888] usbcore: registered new device driver usb
[    0.475196] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.475522] ehci-pci: EHCI PCI platform driver
[    0.475534] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    0.475536] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    0.475650] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.475655] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.475666] ehci-pci 0000:00:1a.0: debug port 2
[    0.476710] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k
[    0.476712] igb: Copyright (c) 2007-2013 Intel Corporation.
[    0.477349] igb 0000:03:00.0: irq 40 for MSI/MSI-X
[    0.477353] igb 0000:03:00.0: irq 41 for MSI/MSI-X
[    0.477358] igb 0000:03:00.0: irq 42 for MSI/MSI-X
[    0.477362] igb 0000:03:00.0: irq 43 for MSI/MSI-X
[    0.477366] igb 0000:03:00.0: irq 44 for MSI/MSI-X
[    0.479549] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.479567] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf073c000
[    0.480037] SCSI subsystem initialized
[    0.480781] libata version 3.00 loaded.
[    0.490389] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.490567] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.490569] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.490570] usb usb1: Product: EHCI Host Controller
[    0.490570] usb usb1: Manufacturer: Linux 3.13-1-amd64 ehci_hcd
[    0.490571] usb usb1: SerialNumber: 0000:00:1a.0
[    0.490644] hub 1-0:1.0: USB hub found
[    0.490654] hub 1-0:1.0: 2 ports detected
[    0.490827] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.490830] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.490839] ehci-pci 0000:00:1d.0: debug port 2
[    0.494732] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.494742] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf073b000
[    0.506335] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.506348] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.506349] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.506350] usb usb2: Product: EHCI Host Controller
[    0.506351] usb usb2: Manufacturer: Linux 3.13-1-amd64 ehci_hcd
[    0.506351] usb usb2: SerialNumber: 0000:00:1d.0
[    0.506473] hub 2-0:1.0: USB hub found
[    0.506476] hub 2-0:1.0: 2 ports detected
[    0.506882] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    0.506937] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[    0.518795] igb 0000:03:00.0: added PHC on eth0
[    0.518806] igb 0000:03:00.0: Intel(R) Gigabit Ethernet Network Connection
[    0.518808] igb 0000:03:00.0: eth0: (PCIe:2.5Gb/s:Width x1) bc:5f:f4:c7:f4:fc
[    0.518809] igb 0000:03:00.0: eth0: PBA No: FFFFFF-0FF
[    0.518809] igb 0000:03:00.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s)
[    0.680164] e1000e 0000:00:19.0 eth1: registered PHC clock
[    0.680166] e1000e 0000:00:19.0 eth1: (PCI Express:2.5GT/s:Width x1) bc:5f:f4:c7:f4:fb
[    0.680167] e1000e 0000:00:19.0 eth1: Intel(R) PRO/1000 Network Connection
[    0.680204] e1000e 0000:00:19.0 eth1: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
[    0.680346] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.680349] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    0.680461] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.680472] xhci_hcd 0000:00:14.0: irq 46 for MSI/MSI-X
[    0.680526] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    0.680527] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.680528] usb usb3: Product: xHCI Host Controller
[    0.680529] usb usb3: Manufacturer: Linux 3.13-1-amd64 xhci_hcd
[    0.680529] usb usb3: SerialNumber: 0000:00:14.0
[    0.680681] hub 3-0:1.0: USB hub found
[    0.680700] hub 3-0:1.0: 14 ports detected
[    0.682028] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.682030] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    0.682063] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    0.682064] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.682065] usb usb4: Product: xHCI Host Controller
[    0.682065] usb usb4: Manufacturer: Linux 3.13-1-amd64 xhci_hcd
[    0.682066] usb usb4: SerialNumber: 0000:00:14.0
[    0.682189] hub 4-0:1.0: USB hub found
[    0.682200] hub 4-0:1.0: 6 ports detected
[    0.706213] ahci 0000:00:1f.2: version 3.0
[    0.706305] ahci 0000:00:1f.2: irq 47 for MSI/MSI-X
[    0.706365] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x15 impl SATA mode
[    0.706366] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst 
[    0.722437] scsi0 : ahci
[    0.722600] scsi1 : ahci
[    0.722699] scsi2 : ahci
[    0.722832] scsi3 : ahci
[    0.722947] scsi4 : ahci
[    0.723046] scsi5 : ahci
[    0.723080] ata1: SATA max UDMA/133 abar m2048@0xf073a000 port 0xf073a100 irq 47
[    0.723081] ata2: DUMMY
[    0.723083] ata3: SATA max UDMA/133 abar m2048@0xf073a000 port 0xf073a200 irq 47
[    0.723083] ata4: DUMMY
[    0.723085] ata5: SATA max UDMA/133 abar m2048@0xf073a000 port 0xf073a300 irq 47
[    0.723085] ata6: DUMMY
[    0.723193] ahci 0000:02:00.0: irq 48 for MSI/MSI-X
[    0.723229] ahci 0000:02:00.0: SSS flag set, parallel bus scan disabled
[    0.723264] ahci 0000:02:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    0.723266] ahci 0000:02:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs 
[    0.723539] scsi6 : ahci
[    0.723603] scsi7 : ahci
[    0.723645] ata7: SATA max UDMA/133 abar m512@0xf0600000 port 0xf0600100 irq 48
[    0.723647] ata8: SATA max UDMA/133 abar m512@0xf0600000 port 0xf0600180 irq 48
[    0.723717] ahci 0000:04:00.0: irq 49 for MSI/MSI-X
[    0.723740] ahci 0000:04:00.0: SSS flag set, parallel bus scan disabled
[    0.723767] ahci 0000:04:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    0.723768] ahci 0000:04:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs 
[    0.723898] scsi8 : ahci
[    0.723937] scsi9 : ahci
[    0.723956] ata9: SATA max UDMA/133 abar m512@0xf0400000 port 0xf0400100 irq 49
[    0.723958] ata10: SATA max UDMA/133 abar m512@0xf0400000 port 0xf0400180 irq 49
[    0.802096] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    0.934357] usb 1-1: New USB device found, idVendor=8087, idProduct=8008
[    0.934359] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    0.934610] hub 1-1:1.0: USB hub found
[    0.934731] hub 1-1:1.0: 6 ports detected
[    1.041900] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.041932] ata7: SATA link down (SStatus 0 SControl 300)
[    1.041934] ata9: SATA link down (SStatus 0 SControl 300)
[    1.041945] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.041964] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.043211] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.043213] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.043215] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.043629] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.043631] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.043632] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.044334] ata5.00: HPA detected: current 1953523055, native 1953525168
[    1.044336] ata5.00: ATA-8: ST31000528AS, CC49, max UDMA/133
[    1.044337] ata5.00: 1953523055 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    1.045355] ata3.00: HPA detected: current 976771055, native 976773168
[    1.045357] ata3.00: ATA-8: ST3500320AS, SD1A, max UDMA/133
[    1.045358] ata3.00: 976771055 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    1.045768] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.045770] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.045771] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.045850] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.046901] ata5.00: configured for UDMA/133
[    1.047499] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.047501] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.047502] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.049208] ata3.00: configured for UDMA/133
[    1.053702] ata1.00: ATA-8: ADATA SP900, 5.0.7a, max UDMA/133
[    1.053704] ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.063519] ata1.00: configured for UDMA/133
[    1.063678] scsi 0:0:0:0: Direct-Access     ATA      ADATA SP900      5.0. PQ: 0 ANSI: 5
[    1.063843] scsi 2:0:0:0: Direct-Access     ATA      ST3500320AS      SD1A PQ: 0 ANSI: 5
[    1.064083] scsi 4:0:0:0: Direct-Access     ATA      ST31000528AS     CC49 PQ: 0 ANSI: 5
[    1.178145] usb 2-1: New USB device found, idVendor=8087, idProduct=8000
[    1.178147] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.178396] hub 2-1:1.0: USB hub found
[    1.178518] hub 2-1:1.0: 8 ports detected
[    1.345629] usb 3-3: new high-speed USB device number 2 using xhci_hcd
[    1.363592] usb 3-3: New USB device found, idVendor=174c, idProduct=2074
[    1.363594] usb 3-3: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[    1.363595] usb 3-3: Product: AS2107
[    1.363596] usb 3-3: Manufacturer: ASMedia
[    1.363596] usb 3-3: SerialNumber: USB2.0 Hub
[    1.364011] hub 3-3:1.0: USB hub found
[    1.364140] hub 3-3:1.0: 4 ports detected
[    1.381621] ata8: SATA link down (SStatus 0 SControl 300)
[    1.417555] tsc: Refined TSC clocksource calibration: 3399.014 MHz
[    1.529460] usb 3-13: new full-speed USB device number 3 using xhci_hcd
[    1.550432] usb 3-13: New USB device found, idVendor=045e, idProduct=0745
[    1.550434] usb 3-13: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.550435] usb 3-13: Product: Microsoft\xffffffc2\xffffffae 2.4GHz Transceiver v8.0
[    1.550436] usb 3-13: Manufacturer: Microsoft
[    1.552041] hidraw: raw HID events driver (C) Jiri Kosina
[    1.554773] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[    1.554787] sd 2:0:0:0: [sdb] 976771055 512-byte logical blocks: (500 GB/465 GiB)
[    1.554801] sd 4:0:0:0: [sdc] 1953523055 512-byte logical blocks: (1.00 TB/931 GiB)
[    1.554878] sd 2:0:0:0: [sdb] Write Protect is off
[    1.554880] sd 0:0:0:0: [sda] Write Protect is off
[    1.554881] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.554883] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.554888] sd 4:0:0:0: [sdc] Write Protect is off
[    1.554891] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    1.554907] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.554912] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.554914] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.556322]  sda: sda1
[    1.556481] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.564526] usbcore: registered new interface driver usbhid
[    1.564527] usbhid: USB HID core driver
[    1.565405] input: Microsoft Microsoft\xffffffc2\xffffffae 2.4GHz Transceiver v8.0 as /devices/pci0000:00/0000:00:14.0/usb3/3-13/3-13:1.0/input/input2
[    1.565440] hid-generic 0003:045E:0745.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft\xffffffc2\xffffffae 2.4GHz Transceiver v8.0] on usb-0000:00:14.0-13/input0
[    1.565573] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.565605] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    1.565634] sd 4:0:0:0: Attached scsi generic sg2 type 0
[    1.565646] input: Microsoft Microsoft\xffffffc2\xffffffae 2.4GHz Transceiver v8.0 as /devices/pci0000:00/0000:00:14.0/usb3/3-13/3-13:1.1/input/input3
[    1.565706] hid-generic 0003:045E:0745.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft\xffffffc2\xffffffae 2.4GHz Transceiver v8.0] on usb-0000:00:14.0-13/input1
[    1.571556]  sdc: sdc1 sdc2
[    1.571874] sd 4:0:0:0: [sdc] Attached SCSI disk
[    1.575117] input: Microsoft Microsoft\xffffffc2\xffffffae 2.4GHz Transceiver v8.0 as /devices/pci0000:00/0000:00:14.0/usb3/3-13/3-13:1.2/input/input4
[    1.575187] hid-generic 0003:045E:0745.0003: input,hiddev0,hidraw2: USB HID v1.11 Device [Microsoft Microsoft\xffffffc2\xffffffae 2.4GHz Transceiver v8.0] on usb-0000:00:14.0-13/input2
[    1.609468]  sdb: sdb1 sdb2 sdb3 < sdb5 sdb6 > sdb4
[    1.610314] sd 2:0:0:0: [sdb] Attached SCSI disk
[    1.661444] usb 4-3: new SuperSpeed USB device number 2 using xhci_hcd
[    1.679122] usb 4-3: New USB device found, idVendor=174c, idProduct=3074
[    1.679123] usb 4-3: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[    1.679124] usb 4-3: Product: AS2107
[    1.679125] usb 4-3: Manufacturer: ASMedia
[    1.679125] usb 4-3: SerialNumber: USB2.0 Hub
[    1.701357] ata10: SATA link down (SStatus 0 SControl 300)
[    2.416812] Switched to clocksource tsc
[    6.673003] usb 4-3: Enable of device-initiated U1 failed.
[    6.673656] hub 4-3:1.0: USB hub found
[    6.673806] hub 4-3:1.0: 4 ports detected
[    7.804722] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[    7.804724] EXT4-fs (sda1): write access will be enabled during recovery
[    7.806391] random: nonblocking pool is initialized
[    7.881988] EXT4-fs (sda1): orphan cleanup on readonly fs
[    7.921727] EXT4-fs (sda1): 1 orphan inode deleted
[    7.921728] EXT4-fs (sda1): recovery complete
[    7.927449] EXT4-fs (sda1): mounted filesystem with writeback data mode. Opts: (null)
[    8.044347] systemd-udevd[416]: starting version 204
[    8.089197] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5
[    8.089202] ACPI: Power Button [PWRB]
[    8.089236] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[    8.089237] ACPI: Power Button [PWRF]
[    8.092846] mei_me 0000:00:16.0: irq 50 for MSI/MSI-X
[    8.093206] wmi: Mapper loaded
[    8.097591] [drm] Initialized drm 1.1.0 20060810
[    8.100144] ACPI Warning: 0x000000000000f040-0x000000000000f05f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20131115/utaddress-251)
[    8.100149] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    8.100225] input: PC Speaker as /devices/platform/pcspkr/input/input7
[    8.102233] snd_hda_intel 0000:00:1b.0: irq 51 for MSI/MSI-X
[    8.112114] hda_codec: ALC1150: SKU not ready 0x00000000
[    8.115384] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
[    8.118675] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[    8.121483] alg: No test for crc32 (crc32-pclmul)
[    8.122303] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16
[    8.122345] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
[    8.122376] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14
[    8.122400] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
[    8.122424] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
[    8.122446] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
[    8.122472] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
[    8.122604] ACPI Warning: 0x0000000000001828-0x000000000000182f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
[    8.122608] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    8.122610] ACPI Warning: 0x0000000000001c30-0x0000000000001c3f SystemIO conflicts with Region \GPRL 1 (20131115/utaddress-251)
[    8.122612] ACPI Warning: 0x0000000000001c30-0x0000000000001c3f SystemIO conflicts with Region \GPR_ 2 (20131115/utaddress-251)
[    8.122613] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    8.122614] ACPI Warning: 0x0000000000001c00-0x0000000000001c2f SystemIO conflicts with Region \GPRL 1 (20131115/utaddress-251)
[    8.122615] ACPI Warning: 0x0000000000001c00-0x0000000000001c2f SystemIO conflicts with Region \GPR_ 2 (20131115/utaddress-251)
[    8.122616] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    8.122617] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    8.123215] [drm] Memory usable by graphics device = 2048M
[    8.124731] iTCO_vendor_support: vendor-support=0
[    8.125494] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[    8.125537] iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860)
[    8.125589] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    8.163680] i915 0000:00:02.0: irq 52 for MSI/MSI-X
[    8.163696] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    8.163697] [drm] Driver supports precise vblank timestamp query.
[    8.163806] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    8.537969] fbcon: inteldrmfb (fb0) is primary device
[    8.777027] Console: switching to colour frame buffer device 180x56
[    8.778859] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    8.778860] i915 0000:00:02.0: registered panic notifier
[    8.815839] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    8.816072] acpi device:59: registered as cooling_device9
[    8.816113] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input17
[    8.816221] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    8.816501] snd_hda_intel 0000:00:03.0: irq 53 for MSI/MSI-X
[    8.830740] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input20
[    8.830773] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input19
[    8.830800] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input18
[    9.806305] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[   15.737020] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[   15.737039] ata3.00: failed command: IDENTIFY DEVICE
[   15.737052] ata3.00: cmd ec/00:01:00:00:00/00:00:00:00:00/00 tag 0 pio 512 in
[   15.737052]          res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[   15.737080] ata3.00: status: { DRDY }
[   15.737090] ata3: hard resetting link
[   16.056724] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   16.059145] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[   16.059147] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[   16.059149] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[   16.063015] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[   16.063017] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[   16.063018] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[   16.064722] ata3.00: configured for UDMA/133
[   16.064728] ata3: EH complete
[   16.885869] EXT4-fs (sda1): re-mounted. Opts: (null)
[   16.945478] EXT4-fs (sda1): re-mounted. Opts: discard,commit=600,errors=remount-ro
[   17.004251] loop: module loaded
[   17.013012] nct6775: Found NCT6776D/F or compatible chip at 0x2e:0x290
[   17.017317] fuse init (API version 7.22)
[   17.179696] EXT4-fs (sdb6): recovery complete
[   17.179701] EXT4-fs (sdb6): mounted filesystem with ordered data mode. Opts: data=ordered
[   17.663994] RPC: Registered named UNIX socket transport module.
[   17.663996] RPC: Registered udp transport module.
[   17.663997] RPC: Registered tcp transport module.
[   17.663997] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   17.665711] FS-Cache: Loaded
[   17.669152] FS-Cache: Netfs 'nfs' registered for caching
[   17.673538] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   17.821183] vboxdrv: Found 8 processor cores.
[   17.821311] vboxdrv: fAsync=0 offMin=0x1d9 offMax=0x1571
[   17.821345] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[   17.821346] vboxdrv: Successfully loaded version 4.3.6_Debian (interface 0x001a0007).
[   17.831157] vboxpci: IOMMU not found (not registered)
[   17.894115] Bluetooth: Core ver 2.17
[   17.894123] NET: Registered protocol family 31
[   17.894123] Bluetooth: HCI device and connection manager initialized
[   17.894129] Bluetooth: HCI socket layer initialized
[   17.894130] Bluetooth: L2CAP socket layer initialized
[   17.894132] Bluetooth: SCO socket layer initialized
[   17.896133] Bluetooth: RFCOMM TTY layer initialized
[   17.896137] Bluetooth: RFCOMM socket layer initialized
[   17.896139] Bluetooth: RFCOMM ver 1.11
[   17.896673] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   17.896675] Bluetooth: BNEP filters: protocol multicast
[   17.896678] Bluetooth: BNEP socket layer initialized

Ostatnio edytowany przez averatec (2014-03-22 14:58:52)

Offline

 

#19  2014-03-22 16:04:56

  yossarian - Szczawiożerca

yossarian
Szczawiożerca
Skąd: Shangri-La
Zarejestrowany: 2011-04-25

Re: System się samoczynnie "restartuje"

Po usunięciu, czy po ponownym włożeniu Ramu?

Offline

 

#20  2014-03-22 16:13:02

  averatec - Użytkownik

averatec
Użytkownik
Zarejestrowany: 2013-10-25

Re: System się samoczynnie "restartuje"

yossarian napisał(-a):

Po usunięciu, czy po ponownym włożeniu Ramu?

po usunieciu, sprawdzalem wykaz obslugiwanych pamieci, kingston i adata sa na liscie, wiec nawet jesli adata gryzl sie z kingstoem, to sam kingston nie moze byc wadliwy bo na starej plycie dzialal bez zarzutow

Offline

 

#21  2014-03-22 23:25:58

  Bitels - Użytkownik

Bitels
Użytkownik
Zarejestrowany: 2012-10-31

Re: System się samoczynnie "restartuje"

no dobra ale jak miałeś kość ADATA wyciągniętą to były zwiechy również? Linux inaczej zarządza pamięcią niż winda i może w tym przypadku coś mu nie służy. Chociaż nie powinno, bo sam widziałem pracującego debiana z uwaloną pamięcią ram (był to jakiś antyk gdzie uwalona kość pokazywała chyba 30mb zamiast 128mb) gdzie winda nawet nie próbowała wstać i z reguły to winda pierwsza się sypie gdy coś w sprzęcie nie gra. A to, że bios obsługuje ram ADATA to nic nie znaczy jeżeli kości się gryzą między sobą. Wiesz może faktycznie ram nie ma nic do tych zwiech, ale puki co to jedyny trop, także wyeliminujmy tą opcje zanim chłopaki, może Ci pomogą bo ja za cienki w uszach jestem.

Offline

 

#22  2014-03-23 15:06:49

  averatec - Użytkownik

averatec
Użytkownik
Zarejestrowany: 2013-10-25

Re: System się samoczynnie "restartuje"

problemem chyba byla opcja odcinania zasilania na plycie glownej przy przegrzewaniu sie elementow, tylko ze nie zaobserwowalem nigdy wysokich temperatur ani na debianie ani na linuxie
ustawilem mnoznik na stale 34, zmienilem ustawienia ramu na 1333Mhz(mimo ze maja radiatorki) i wyglada ze chodzi stabilnie

Offline

 

Stopka forum

Powered by PunBB
© Copyright 2002–2005 Rickard Andersson
Nas ludzie lubią po prostu, a nie klikając w przyciski ;-)