Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!

Ogłoszenie

Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.

Strony: 1 2 ▶

 

#1  2013-12-23 00:06:08

  tajwan - mega boss

tajwan
mega boss
Skąd: Śląsk
Zarejestrowany: 2010-03-30

Sprawdzenie dysku.

Jak można sprawdzić czy dysk jest sprawny?

NIGDY WIĘCEJ TESTING Z KTÓRYM SĄ SAME PROBLEMY !!!

Offline

 

#2  2013-12-23 00:11:46

  morfik - Cenzor wirtualnego świata

morfik
Cenzor wirtualnego świata
Skąd: ze WSI
Zarejestrowany: 2011-09-15
Serwis

Re: Sprawdzenie dysku.

Podłączyć do prądu? xD

Offline

 

#3  2013-12-23 00:16:08

  tajwan - mega boss

tajwan
mega boss
Skąd: Śląsk
Zarejestrowany: 2010-03-30

Re: Sprawdzenie dysku.

Ha ha. Chcę go sprawdzić ogólnie bo chyba coś go może boleć.

NIGDY WIĘCEJ TESTING Z KTÓRYM SĄ SAME PROBLEMY !!!

Offline

 

#4  2013-12-23 00:19:58

  morfik - Cenzor wirtualnego świata

morfik
Cenzor wirtualnego świata
Skąd: ze WSI
Zarejestrowany: 2011-09-15
Serwis

Re: Sprawdzenie dysku.

Po czym wnosisz?

Offline

 

#5  2013-12-23 00:22:53

  tajwan - mega boss

tajwan
mega boss
Skąd: Śląsk
Zarejestrowany: 2010-03-30

Re: Sprawdzenie dysku.

Bo system mam nie do końca sprawny. Różne rzeczy się dzieją z NN powodu.

NIGDY WIĘCEJ TESTING Z KTÓRYM SĄ SAME PROBLEMY !!!

Offline

 

#6  2013-12-23 00:32:47

  fervi - Użytkownik

fervi
Użytkownik
Zarejestrowany: 2010-03-14

Re: Sprawdzenie dysku.

Z Archiwum X

Tu-ru-du-du-du-duuuuu

Sprawdź Smartem (musisz podłączyć dysk)

Fervi

Offline

 

#7  2013-12-23 00:39:44

  tajwan - mega boss

tajwan
mega boss
Skąd: Śląsk
Zarejestrowany: 2010-03-30

Re: Sprawdzenie dysku.

Czemu tu tak zawsze jest jak człowiek pyta ile jest 2+2 to zamiast prosto wiedzieć mu że to jest 4. To mu jesteś równanie piszą .

NIGDY WIĘCEJ TESTING Z KTÓRYM SĄ SAME PROBLEMY !!!

Offline

 

#8  2013-12-23 00:44:21

  fervi - Użytkownik

fervi
Użytkownik
Zarejestrowany: 2010-03-14

Re: Sprawdzenie dysku.

tajwan napisał(-a):

Czemu tu tak zawsze jest jak człowiek pyta ile jest 2+2 to zamiast prosto wiedzieć mu że to jest 4. To mu jesteś równanie piszą .

Żeby do końca życia nie był idiotą i nauczył się liczyć samodzielnie?
Mogę ci powiedzieć ile to jest 2+2, potem 3+3, 4+4, ale jeśli nauczę cię dodawania to ty się czegoś nauczysz, a ja zyskam święty spokój

Fervi

Offline

 

#9  2013-12-23 00:48:17

  tajwan - mega boss

tajwan
mega boss
Skąd: Śląsk
Zarejestrowany: 2010-03-30

Re: Sprawdzenie dysku.

Zakładam, że dysk może być nie do końca sprawny z racji, że kom ogólnie dziwnie się zachowuje czasami przymula czasami przytnie czasem zwisa załapie a czasem w sysku słychać jak byś szpilką po szybie przejechał albo takie stukanie (właściwie dźwięk) jak by się wyłączał i włączał i tak kilka raz ale ponoś się nie wyłącza.

NIGDY WIĘCEJ TESTING Z KTÓRYM SĄ SAME PROBLEMY !!!

Offline

 

#10  2013-12-23 00:52:01

  enether - wiecznie niewyspany

enether
wiecznie niewyspany
Zarejestrowany: 2012-05-01

Re: Sprawdzenie dysku.

Dobra, dam Ci gotowca.

Gdybyś miał GNOME rozwiązaniem najprostszym byłoby odpalenie polecenia

Kod:

palimpsest

i wyklikanie sobie testu.

A teraz wersja pr0:

Kod:

# aptitude install smartmontools
# smartctl -s on /dev/sda
# smartctl -t long /dev/sda
--- po zakończeniu testu ---
# smartctl -Ha /dev/sda

Zakładając że twój dysk jest widziany jako /dev/sda

Potem wrzuć nam wynik ostatniej komendy to ktoś w wolnej chwili go zinterpretuje.

PS. Stukanie i "dźwięk szpilki" sugerują że coś z głowicą i powierzchnią dysku może być nie tak. A to raczej bardzo złe objawy. Robisz backupy, co?

Ostatnio edytowany przez enether (2013-12-23 00:55:27)

Offline

 

#11  2013-12-23 00:52:33

  tajwan - mega boss

tajwan
mega boss
Skąd: Śląsk
Zarejestrowany: 2010-03-30

Re: Sprawdzenie dysku.

Mam gnome:P

Kod:

root@tajwan:/home/tajwan#  smartctl -s on /dev/sda
smartctl 5.41 2011-06-09 r3365 [i686-linux-3.2.0-4-686-pae] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.

root@tajwan:/home/tajwan# smartctl -t long /dev/sda
smartctl 5.41 2011-06-09 r3365 [i686-linux-3.2.0-4-686-pae] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
Sending command: "Execute SMART Extended self-test routine immediately in off-line mode".
Drive command "Execute SMART Extended self-test routine immediately in off-line mode" successful.
Testing has begun.
Please wait 70 minutes for test to complete.
Test will complete after Mon Dec 23 02:04:09 2013

Use smartctl -X to abort test.
root@tajwan:/home/tajwan#  smartctl -Ha /dev/sda
smartctl 5.41 2011-06-09 r3365 [i686-linux-3.2.0-4-686-pae] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Scorpio Blue Serial ATA
Device Model:     WDC WD1200BEVS-22RST0
Serial Number:    WD-WXCX07074772
LU WWN Device Id: 5 0014ee 200a77063
Firmware Version: 04.01G04
User Capacity:    120,034,123,776 bytes [120 GB]
Sector Size:      512 bytes logical/physical
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   7
ATA Standard is:  Exact ATA specification draft version not indicated
Local Time is:    Mon Dec 23 00:54:45 2013 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)    Offline data collection activity
                    was never started.
                    Auto Offline Data Collection: Disabled.
Self-test execution status:      ( 249)    Self-test routine in progress...
                    90% of test remaining.
Total time to complete Offline 
data collection:         ( 5400) seconds.
Offline data collection
capabilities:              (0x7b) SMART execute Offline immediate.
                    Auto Offline data collection on/off support.
                    Suspend Offline collection upon new
                    command.
                    Offline surface scan supported.
                    Self-test supported.
                    Conveyance Self-test supported.
                    Selective Self-test supported.
SMART capabilities:            (0x0003)    Saves SMART data before entering
                    power-saving mode.
                    Supports SMART auto save timer.
Error logging capability:        (0x01)    Error logging supported.
                    General Purpose Logging supported.
Short self-test routine 
recommended polling time:      (   2) minutes.
Extended self-test routine
recommended polling time:      (  70) minutes.
Conveyance self-test routine
recommended polling time:      (   6) minutes.
SCT capabilities:            (0x103f)    SCT Status supported.
                    SCT Error Recovery Control supported.
                    SCT Feature Control supported.
                    SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   200   197   051    Pre-fail  Always       -       0
  3 Spin_Up_Time            0x0003   187   184   021    Pre-fail  Always       -       1608
  4 Start_Stop_Count        0x0032   094   094   000    Old_age   Always       -       6287
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   100   253   051    Pre-fail  Always       -       0
  9 Power_On_Hours          0x0032   076   076   000    Old_age   Always       -       17570
 10 Spin_Retry_Count        0x0013   100   100   051    Pre-fail  Always       -       0
 11 Calibration_Retry_Count 0x0012   100   100   051    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   094   094   000    Old_age   Always       -       6025
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       514
193 Load_Cycle_Count        0x0032   096   096   000    Old_age   Always       -       313820
194 Temperature_Celsius     0x0022   110   097   000    Old_age   Always       -       37
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0012   200   200   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   253   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       1
200 Multi_Zone_Error_Rate   0x0009   100   253   051    Pre-fail  Offline      -       0

SMART Error Log Version: 1
ATA Error Count: 11 (device log contains only the most recent five errors)
    CR = Command Register [HEX]
    FR = Features Register [HEX]
    SC = Sector Count Register [HEX]
    SN = Sector Number Register [HEX]
    CL = Cylinder Low Register [HEX]
    CH = Cylinder High Register [HEX]
    DH = Device/Head Register [HEX]
    DC = Device Command Register [HEX]
    ER = Error register [HEX]
    ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 11 occurred at disk power-on lifetime: 15342 hours (639 days + 6 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ce 63 53 e9  Error: UNC at LBA = 0x095363ce = 156459982

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 80 af 63 53 09 00      04:11:27.828  READ DMA
  ca 00 08 77 b2 ae 03 00      04:11:27.827  WRITE DMA
  c8 00 40 c7 c2 1b 03 00      04:11:27.827  READ DMA
  ca 00 09 bf 6d 66 02 00      04:11:27.827  WRITE DMA
  ca 00 02 bf 7a 6c 01 00      04:11:27.827  WRITE DMA

Error 10 occurred at disk power-on lifetime: 15342 hours (639 days + 6 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ce 63 53 e9  Error: UNC at LBA = 0x095363ce = 156459982

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 80 af 63 53 09 00      04:11:24.655  READ DMA
  c8 00 40 87 c2 1b 03 00      04:11:24.654  READ DMA
  e7 00 00 00 00 00 00 00      04:11:24.654  FLUSH CACHE
  c8 00 80 af 62 53 09 00      04:11:24.653  READ DMA
  c8 00 40 47 c2 1b 03 00      04:11:24.653  READ DMA

Error 9 occurred at disk power-on lifetime: 15342 hours (639 days + 6 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ce 63 53 e9  Error: UNC at LBA = 0x095363ce = 156459982

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 80 af 63 53 09 00      04:11:20.863  READ DMA
  c8 00 40 47 c0 1b 03 00      04:11:20.846  READ DMA
  ca 00 09 b7 7a 6c 01 00      04:11:20.846  WRITE DMA
  c8 00 08 9f 65 61 01 00      04:11:20.846  READ DMA
  c8 00 78 17 44 53 01 00      04:11:20.831  READ DMA

Error 8 occurred at disk power-on lifetime: 15342 hours (639 days + 6 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ce 63 53 e9  Error: UNC at LBA = 0x095363ce = 156459982

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 80 af 63 53 09 00      04:11:17.666  READ DMA
  c8 00 40 07 c0 1b 03 00      04:11:17.658  READ DMA
  c8 00 80 1f 65 61 01 00      04:11:17.657  READ DMA
  c8 00 08 1f d2 f9 00 00      04:11:17.646  READ DMA
  c8 00 80 2f 63 53 09 00      04:11:17.646  READ DMA

Error 7 occurred at disk power-on lifetime: 15342 hours (639 days + 6 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ce 63 53 e9  Error: UNC at LBA = 0x095363ce = 156459982

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 68 c7 63 53 09 00      04:11:05.987  READ DMA
  c8 00 40 e7 f6 1b 03 00      04:11:05.974  READ DMA
  ca 00 10 7f 30 54 02 00      04:11:05.974  WRITE DMA
  ca 00 80 5f 8e 04 01 00      04:11:05.973  WRITE DMA
  ca 00 80 df 8d 04 01 00      04:11:05.973  WRITE DMA

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]


SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

root@tajwan:/home/tajwan#

Kod:

root@tajwan:/home/tajwan# palimpsest

(palimpsest:5207): Unique-GDBus-WARNING **: Unable to open a connection to the session bus: Połączenie jest zamknięte

(palimpsest:5207): GLib-GIO-CRITICAL **: g_dbus_connection_call_sync_internal: assertion `G_IS_DBUS_CONNECTION (connection)' failed
Naruszenie ochrony pamięci

Ostatnio edytowany przez tajwan (2013-12-23 00:59:21)

NIGDY WIĘCEJ TESTING Z KTÓRYM SĄ SAME PROBLEMY !!!

Offline

 

#12  2013-12-23 00:59:09

  enether - wiecznie niewyspany

enether
wiecznie niewyspany
Zarejestrowany: 2012-05-01

Re: Sprawdzenie dysku.

root@tajwan:/home/tajwan# smartctl -t long /dev/sda
smartctl 5.41 2011-06-09 r3365 [i686-linux-3.2.0-4-686-pae] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
Sending command: "Execute SMART Extended self-test routine immediately in off-line mode".
Drive command "Execute SMART Extended self-test routine immediately in off-line mode" successful.
Testing has begun.
Please wait 70 minutes for test to complete.
Test will complete after Mon Dec 23 02:04:09 2013

BTW: nawet mimo braku wyników testu z samego "samorzutnego" loga widać że na dysku coś się złego działo.
do tego ta liczba parkowań głowicy

193 Load_Cycle_Count        0x0032   096   096   000    Old_age   Always       -       313820

Dla porównania z mojego twardziela

ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   062    Pre-fail  Always       -       0
  2 Throughput_Performance  0x0005   100   100   040    Pre-fail  Offline      -       0
  3 Spin_Up_Time            0x0007   253   253   033    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0012   097   097   000    Old_age   Always       -       5483
  5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000b   100   100   067    Pre-fail  Always       -       0
  8 Seek_Time_Performance   0x0005   100   100   040    Pre-fail  Offline      -       0
  9 Power_On_Hours          0x0012   075   075   000    Old_age   Always       -       11194
10 Spin_Retry_Count        0x0013   100   100   060    Pre-fail  Always       -       0
12 Power_Cycle_Count       0x0032   098   098   000    Old_age   Always       -       4251
191 G-Sense_Error_Rate      0x000a   100   100   000    Old_age   Always       -       0
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       2980577368
193 Load_Cycle_Count        0x0012   094   094   000    Old_age   Always       -       69263
194 Temperature_Celsius     0x0002   152   152   000    Old_age   Always       -       36 (Min/Max 13/48)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       5
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       0
223 Load_Retry_Count        0x000a   100   100   000    Old_age   Always       -       0

PS. palimpsesta odpalasz z normalnego usera ;)

Ostatnio edytowany przez enether (2013-12-23 01:05:42)

Offline

 

#13  2013-12-23 01:08:01

  tajwan - mega boss

tajwan
mega boss
Skąd: Śląsk
Zarejestrowany: 2010-03-30

Re: Sprawdzenie dysku.

Odpalić go teraz i zostawić czy uruchomić na nowo kompa uruchomić.

NIGDY WIĘCEJ TESTING Z KTÓRYM SĄ SAME PROBLEMY !!!

Offline

 

#14  2013-12-23 01:10:06

  enether - wiecznie niewyspany

enether
wiecznie niewyspany
Zarejestrowany: 2012-05-01

Re: Sprawdzenie dysku.

Jak już odpaliłeś test to daj mu się skończyć. Jak chcesz przerwać aktualnie lecący to nawet Ci napisało co trzeba zrobić ;)

Please wait 70 minutes for test to complete.
Test will complete after Mon Dec 23 02:04:09 2013

Use smartctl -X to abort test.

Offline

 

#15  2013-12-23 01:16:30

  menel - Użytkownik

menel
Użytkownik
Zarejestrowany: 2013-11-02

Re: Sprawdzenie dysku.

http://backtrack.pl/2010/04/08/szybki-test-dysku-tw … rt-self-test/

Offline

 

#16  2013-12-23 02:07:44

  morfik - Cenzor wirtualnego świata

morfik
Cenzor wirtualnego świata
Skąd: ze WSI
Zarejestrowany: 2011-09-15
Serwis

Re: Sprawdzenie dysku.

tajwan napisał(-a):

Czemu tu tak zawsze jest jak człowiek pyta ile jest 2+2 to zamiast prosto wiedzieć mu że to jest 4. To mu jesteś równanie piszą .

Bo ty nie zadajesz pytania "2+2", ty zadajesz "?+?" i oczekujesz by ktoś ci odpowiedział, xD

Co do dysku, to tam nic złego nie widać, Były problemy z sektorami, temp trochę wysoka, choć pewnie przesadzam, no i to parkowanie ssie, bym ci powiedział, żebyś sobie to wyłączył ale pewnie dysk rozwalisz, więc lepiej to zostawić i czekać na powolną śmieć dysku. xD

Offline

 

#17  2013-12-23 03:50:57

  tajwan - mega boss

tajwan
mega boss
Skąd: Śląsk
Zarejestrowany: 2010-03-30

Re: Sprawdzenie dysku.

Czy ktoś mógłby to odczytać i zinterpretować?

Kod:

root@tajwan:/home/tajwan# smartctl -s on /dev/sda
smartctl 5.41 2011-06-09 r3365 [i686-linux-3.2.0-4-686-pae] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.

root@tajwan:/home/tajwan#  smartctl -t long /dev/sda
smartctl 5.41 2011-06-09 r3365 [i686-linux-3.2.0-4-686-pae] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
Sending command: "Execute SMART Extended self-test routine immediately in off-line mode".
Drive command "Execute SMART Extended self-test routine immediately in off-line mode" successful.
Testing has begun.
Please wait 70 minutes for test to complete.
Test will complete after Mon Dec 23 02:35:13 2013

Use smartctl -X to abort test.
root@tajwan:/home/tajwan# smartctl -Ha /dev/sda
smartctl 5.41 2011-06-09 r3365 [i686-linux-3.2.0-4-686-pae] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Scorpio Blue Serial ATA
Device Model:     WDC WD1200BEVS-22RST0
Serial Number:    WD-WXCX07074772
LU WWN Device Id: 5 0014ee 200a77063
Firmware Version: 04.01G04
User Capacity:    120,034,123,776 bytes [120 GB]
Sector Size:      512 bytes logical/physical
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   7
ATA Standard is:  Exact ATA specification draft version not indicated
Local Time is:    Mon Dec 23 03:49:52 2013 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)    Offline data collection activity
                    was never started.
                    Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)    The previous self-test routine completed
                    without error or no self-test has ever 
                    been run.
Total time to complete Offline 
data collection:         ( 5400) seconds.
Offline data collection
capabilities:              (0x7b) SMART execute Offline immediate.
                    Auto Offline data collection on/off support.
                    Suspend Offline collection upon new
                    command.
                    Offline surface scan supported.
                    Self-test supported.
                    Conveyance Self-test supported.
                    Selective Self-test supported.
SMART capabilities:            (0x0003)    Saves SMART data before entering
                    power-saving mode.
                    Supports SMART auto save timer.
Error logging capability:        (0x01)    Error logging supported.
                    General Purpose Logging supported.
Short self-test routine 
recommended polling time:      (   2) minutes.
Extended self-test routine
recommended polling time:      (  70) minutes.
Conveyance self-test routine
recommended polling time:      (   6) minutes.
SCT capabilities:            (0x103f)    SCT Status supported.
                    SCT Error Recovery Control supported.
                    SCT Feature Control supported.
                    SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   200   197   051    Pre-fail  Always       -       0
  3 Spin_Up_Time            0x0003   187   184   021    Pre-fail  Always       -       1616
  4 Start_Stop_Count        0x0032   094   094   000    Old_age   Always       -       6288
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   200   200   051    Pre-fail  Always       -       0
  9 Power_On_Hours          0x0032   076   076   000    Old_age   Always       -       17573
 10 Spin_Retry_Count        0x0013   100   100   051    Pre-fail  Always       -       0
 11 Calibration_Retry_Count 0x0012   100   100   051    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   094   094   000    Old_age   Always       -       6026
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       514
193 Load_Cycle_Count        0x0032   096   096   000    Old_age   Always       -       313821
194 Temperature_Celsius     0x0022   106   097   000    Old_age   Always       -       41
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0012   200   200   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   253   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       1
200 Multi_Zone_Error_Rate   0x0009   200   200   051    Pre-fail  Offline      -       0

SMART Error Log Version: 1
ATA Error Count: 11 (device log contains only the most recent five errors)
    CR = Command Register [HEX]
    FR = Features Register [HEX]
    SC = Sector Count Register [HEX]
    SN = Sector Number Register [HEX]
    CL = Cylinder Low Register [HEX]
    CH = Cylinder High Register [HEX]
    DH = Device/Head Register [HEX]
    DC = Device Command Register [HEX]
    ER = Error register [HEX]
    ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 11 occurred at disk power-on lifetime: 15342 hours (639 days + 6 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ce 63 53 e9  Error: UNC at LBA = 0x095363ce = 156459982

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 80 af 63 53 09 00      04:11:27.828  READ DMA
  ca 00 08 77 b2 ae 03 00      04:11:27.827  WRITE DMA
  c8 00 40 c7 c2 1b 03 00      04:11:27.827  READ DMA
  ca 00 09 bf 6d 66 02 00      04:11:27.827  WRITE DMA
  ca 00 02 bf 7a 6c 01 00      04:11:27.827  WRITE DMA

Error 10 occurred at disk power-on lifetime: 15342 hours (639 days + 6 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ce 63 53 e9  Error: UNC at LBA = 0x095363ce = 156459982

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 80 af 63 53 09 00      04:11:24.655  READ DMA
  c8 00 40 87 c2 1b 03 00      04:11:24.654  READ DMA
  e7 00 00 00 00 00 00 00      04:11:24.654  FLUSH CACHE
  c8 00 80 af 62 53 09 00      04:11:24.653  READ DMA
  c8 00 40 47 c2 1b 03 00      04:11:24.653  READ DMA

Error 9 occurred at disk power-on lifetime: 15342 hours (639 days + 6 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ce 63 53 e9  Error: UNC at LBA = 0x095363ce = 156459982

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 80 af 63 53 09 00      04:11:20.863  READ DMA
  c8 00 40 47 c0 1b 03 00      04:11:20.846  READ DMA
  ca 00 09 b7 7a 6c 01 00      04:11:20.846  WRITE DMA
  c8 00 08 9f 65 61 01 00      04:11:20.846  READ DMA
  c8 00 78 17 44 53 01 00      04:11:20.831  READ DMA

Error 8 occurred at disk power-on lifetime: 15342 hours (639 days + 6 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ce 63 53 e9  Error: UNC at LBA = 0x095363ce = 156459982

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 80 af 63 53 09 00      04:11:17.666  READ DMA
  c8 00 40 07 c0 1b 03 00      04:11:17.658  READ DMA
  c8 00 80 1f 65 61 01 00      04:11:17.657  READ DMA
  c8 00 08 1f d2 f9 00 00      04:11:17.646  READ DMA
  c8 00 80 2f 63 53 09 00      04:11:17.646  READ DMA

Error 7 occurred at disk power-on lifetime: 15342 hours (639 days + 6 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ce 63 53 e9  Error: UNC at LBA = 0x095363ce = 156459982

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 68 c7 63 53 09 00      04:11:05.987  READ DMA
  c8 00 40 e7 f6 1b 03 00      04:11:05.974  READ DMA
  ca 00 10 7f 30 54 02 00      04:11:05.974  WRITE DMA
  ca 00 80 5f 8e 04 01 00      04:11:05.973  WRITE DMA
  ca 00 80 df 8d 04 01 00      04:11:05.973  WRITE DMA

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed without error       00%     17572         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

root@tajwan:/home/tajwan#

http://img9.imageshack.us/img9/9204/6v2o.png

Ostatnio edytowany przez tajwan (2013-12-23 20:43:26)

NIGDY WIĘCEJ TESTING Z KTÓRYM SĄ SAME PROBLEMY !!!

Offline

 

#18  2013-12-23 14:53:44

  tajwan - mega boss

tajwan
mega boss
Skąd: Śląsk
Zarejestrowany: 2010-03-30

Re: Sprawdzenie dysku.

?

NIGDY WIĘCEJ TESTING Z KTÓRYM SĄ SAME PROBLEMY !!!

Offline

 

#19  2013-12-23 16:03:40

  menel - Użytkownik

menel
Użytkownik
Zarejestrowany: 2013-11-02

Re: Sprawdzenie dysku.

@tajwan, wejdź w linka, który Ci podałem wyżej. Tam wszystko masz opisane co i jak robić, również jak interpretować parametry. Trochę samodzielności nie zaszkodzi w szczególności, że masz podane źródło...

Jak chcesz zrobić bardziej zaawansowane testy to polecam Ultimate Boot CD, zresztą najlepiej korzystać z takich narzędzi, bo taki system ładuje się do ramu (w twoim przypadku PartedMagic, który także jest na tej płytce) i można zrobić konkretne testy twardziela z konkretnymi, niezakłamanymi wynikami...poza tym UBC posiada masę przydatnych zaawansowanych narzędzi do diagnostyki ważniejszych podzespołów i zawsze się przyda taka płytka w razie problemów ze sprzętem...

Zresztą ja podejrzewam, że masz po prostu spartaczony system, po tych wszystkich zabawach i wygibasach jakie wyczyniałeś ostatnio;) jest to całkiem możliwe...

Ostatnio edytowany przez menel (2013-12-23 16:31:30)

Offline

 

#20  2013-12-23 18:24:11

  morfik - Cenzor wirtualnego świata

morfik
Cenzor wirtualnego świata
Skąd: ze WSI
Zarejestrowany: 2011-09-15
Serwis

Re: Sprawdzenie dysku.

tajwan -- nie potrafisz porównać dwóch wyników, które wkleiłeś?

Offline

 

#21  2013-12-23 19:08:00

  tajwan - mega boss

tajwan
mega boss
Skąd: Śląsk
Zarejestrowany: 2010-03-30

Re: Sprawdzenie dysku.

menel napisał(-a):

@tajwan, wejdź w linka, który Ci podałem wyżej. Tam wszystko masz opisane co i jak robić, również jak interpretować parametry. Trochę samodzielności nie zaszkodzi w szczególności, że masz podane źródło...

Jak chcesz zrobić bardziej zaawansowane testy to polecam Ultimate Boot CD, zresztą najlepiej korzystać z takich narzędzi, bo taki system ładuje się do ramu (w twoim przypadku PartedMagic, który także jest na tej płytce) i można zrobić konkretne testy twardziela z konkretnymi, niezakłamanymi wynikami...poza tym UBC posiada masę przydatnych zaawansowanych narzędzi do diagnostyki ważniejszych podzespołów i zawsze się przyda taka płytka w razie problemów ze sprzętem...

Zresztą ja podejrzewam, że masz po prostu spartaczony system, po tych wszystkich zabawach i wygibasach jakie wyczyniałeś ostatnio;) jest to całkiem możliwe...

Chyba aż takiego mistrza to nie mam :D aby na nowo wym systemie zainstalować kilka programów  i zepsuć system.


Ogólnie to dysk na śmietnik może iść.

Ostatnio edytowany przez tajwan (2013-12-23 19:12:12)

NIGDY WIĘCEJ TESTING Z KTÓRYM SĄ SAME PROBLEMY !!!

Offline

 

#22  2013-12-26 01:26:09

  tajwan - mega boss

tajwan
mega boss
Skąd: Śląsk
Zarejestrowany: 2010-03-30

Re: Sprawdzenie dysku.

Jak ktoś by miał  czas to mógłby porównać poprzedni oraz ten test. Czy coś się zmieniło na gorsze lub lepsze? A dało by się jakoś odratować trochę tego dysku np. podzielić uszkodzone części dysku na partycje uszkodzone?

Kod:

root@tajwan:/home/tajwan# smartctl -s on /dev/sda
smartctl 5.41 2011-06-09 r3365 [i686-linux-3.2.0-4-686-pae] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.

root@tajwan:/home/tajwan# smartctl -t long /dev/sda
smartctl 5.41 2011-06-09 r3365 [i686-linux-3.2.0-4-686-pae] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
Sending command: "Execute SMART Extended self-test routine immediately in off-line mode".
Drive command "Execute SMART Extended self-test routine immediately in off-line mode" successful.
Testing has begun.
Please wait 70 minutes for test to complete.
Test will complete after Thu Dec 26 01:11:22 2013

Use smartctl -X to abort test.
root@tajwan:/home/tajwan# smartctl -Ha /dev/sda
smartctl 5.41 2011-06-09 r3365 [i686-linux-3.2.0-4-686-pae] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Scorpio Blue Serial ATA
Device Model:     WDC WD1200BEVS-22RST0
Serial Number:    WD-WXCX07074772
LU WWN Device Id: 5 0014ee 200a77063
Firmware Version: 04.01G04
User Capacity:    120,034,123,776 bytes [120 GB]
Sector Size:      512 bytes logical/physical
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   7
ATA Standard is:  Exact ATA specification draft version not indicated
Local Time is:    Thu Dec 26 01:22:11 2013 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)    Offline data collection activity
                    was never started.
                    Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)    The previous self-test routine completed
                    without error or no self-test has ever 
                    been run.
Total time to complete Offline 
data collection:         ( 5400) seconds.
Offline data collection
capabilities:              (0x7b) SMART execute Offline immediate.
                    Auto Offline data collection on/off support.
                    Suspend Offline collection upon new
                    command.
                    Offline surface scan supported.
                    Self-test supported.
                    Conveyance Self-test supported.
                    Selective Self-test supported.
SMART capabilities:            (0x0003)    Saves SMART data before entering
                    power-saving mode.
                    Supports SMART auto save timer.
Error logging capability:        (0x01)    Error logging supported.
                    General Purpose Logging supported.
Short self-test routine 
recommended polling time:      (   2) minutes.
Extended self-test routine
recommended polling time:      (  70) minutes.
Conveyance self-test routine
recommended polling time:      (   6) minutes.
SCT capabilities:            (0x103f)    SCT Status supported.
                    SCT Error Recovery Control supported.
                    SCT Feature Control supported.
                    SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   200   197   051    Pre-fail  Always       -       0
  3 Spin_Up_Time            0x0003   190   184   021    Pre-fail  Always       -       1458
  4 Start_Stop_Count        0x0032   094   094   000    Old_age   Always       -       6337
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   200   200   051    Pre-fail  Always       -       0
  9 Power_On_Hours          0x0032   076   076   000    Old_age   Always       -       17591
 10 Spin_Retry_Count        0x0013   100   100   051    Pre-fail  Always       -       0
 11 Calibration_Retry_Count 0x0012   100   100   051    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   094   094   000    Old_age   Always       -       6036
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       514
193 Load_Cycle_Count        0x0032   096   096   000    Old_age   Always       -       313870
194 Temperature_Celsius     0x0022   113   097   000    Old_age   Always       -       34
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0012   200   200   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   253   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       1
200 Multi_Zone_Error_Rate   0x0009   200   200   051    Pre-fail  Offline      -       0

SMART Error Log Version: 1
ATA Error Count: 11 (device log contains only the most recent five errors)
    CR = Command Register [HEX]
    FR = Features Register [HEX]
    SC = Sector Count Register [HEX]
    SN = Sector Number Register [HEX]
    CL = Cylinder Low Register [HEX]
    CH = Cylinder High Register [HEX]
    DH = Device/Head Register [HEX]
    DC = Device Command Register [HEX]
    ER = Error register [HEX]
    ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 11 occurred at disk power-on lifetime: 15342 hours (639 days + 6 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ce 63 53 e9  Error: UNC at LBA = 0x095363ce = 156459982

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 80 af 63 53 09 00      04:11:27.828  READ DMA
  ca 00 08 77 b2 ae 03 00      04:11:27.827  WRITE DMA
  c8 00 40 c7 c2 1b 03 00      04:11:27.827  READ DMA
  ca 00 09 bf 6d 66 02 00      04:11:27.827  WRITE DMA
  ca 00 02 bf 7a 6c 01 00      04:11:27.827  WRITE DMA

Error 10 occurred at disk power-on lifetime: 15342 hours (639 days + 6 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ce 63 53 e9  Error: UNC at LBA = 0x095363ce = 156459982

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 80 af 63 53 09 00      04:11:24.655  READ DMA
  c8 00 40 87 c2 1b 03 00      04:11:24.654  READ DMA
  e7 00 00 00 00 00 00 00      04:11:24.654  FLUSH CACHE
  c8 00 80 af 62 53 09 00      04:11:24.653  READ DMA
  c8 00 40 47 c2 1b 03 00      04:11:24.653  READ DMA

Error 9 occurred at disk power-on lifetime: 15342 hours (639 days + 6 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ce 63 53 e9  Error: UNC at LBA = 0x095363ce = 156459982

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 80 af 63 53 09 00      04:11:20.863  READ DMA
  c8 00 40 47 c0 1b 03 00      04:11:20.846  READ DMA
  ca 00 09 b7 7a 6c 01 00      04:11:20.846  WRITE DMA
  c8 00 08 9f 65 61 01 00      04:11:20.846  READ DMA
  c8 00 78 17 44 53 01 00      04:11:20.831  READ DMA

Error 8 occurred at disk power-on lifetime: 15342 hours (639 days + 6 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ce 63 53 e9  Error: UNC at LBA = 0x095363ce = 156459982

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 80 af 63 53 09 00      04:11:17.666  READ DMA
  c8 00 40 07 c0 1b 03 00      04:11:17.658  READ DMA
  c8 00 80 1f 65 61 01 00      04:11:17.657  READ DMA
  c8 00 08 1f d2 f9 00 00      04:11:17.646  READ DMA
  c8 00 80 2f 63 53 09 00      04:11:17.646  READ DMA

Error 7 occurred at disk power-on lifetime: 15342 hours (639 days + 6 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ce 63 53 e9  Error: UNC at LBA = 0x095363ce = 156459982

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 68 c7 63 53 09 00      04:11:05.987  READ DMA
  c8 00 40 e7 f6 1b 03 00      04:11:05.974  READ DMA
  ca 00 10 7f 30 54 02 00      04:11:05.974  WRITE DMA
  ca 00 80 5f 8e 04 01 00      04:11:05.973  WRITE DMA
  ca 00 80 df 8d 04 01 00      04:11:05.973  WRITE DMA

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed without error       00%     17591         -
# 2  Extended offline    Completed without error       00%     17572         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
NIGDY WIĘCEJ TESTING Z KTÓRYM SĄ SAME PROBLEMY !!!

Offline

 

#23  2013-12-26 11:29:04

  Pavlo950 - człowiek pasjonat :D

Pavlo950
człowiek pasjonat :D
Zarejestrowany: 2012-02-20
Serwis

Re: Sprawdzenie dysku.

A sam nie możesz?

Offline

 

#24  2013-12-26 13:58:44

  tajwan - mega boss

tajwan
mega boss
Skąd: Śląsk
Zarejestrowany: 2010-03-30

Re: Sprawdzenie dysku.

Nie... bo nie wiem co on ode mnie chce.

NIGDY WIĘCEJ TESTING Z KTÓRYM SĄ SAME PROBLEMY !!!

Offline

 

#25  2013-12-26 15:27:41

  fervi - Użytkownik

fervi
Użytkownik
Zarejestrowany: 2010-03-14

Re: Sprawdzenie dysku.

Chce, byś go traktował z miłością i czułością, ty bezduszny samcze

Fervi

Offline

 

 

Strony: 1 2 ▶

Stopka forum

Powered by PunBB
© Copyright 2002–2005 Rickard Andersson
Nas ludzie lubią po prostu, a nie klikając w przyciski ;-)