Forum Debian Users Gang

root@localhost:/home/miczeb15# lsusb
Bus 007 Device 002: ID 064e:a103 Suyin Corp. Acer/HP Integrated Webcam [CN0314]
Bus 007 Device 003: ID 0bda:0158 Realtek Semiconductor Corp. USB 2.0 multicard reader
Bus 008 Device 002: ID 0421:0302 Nokia Mobile Phones 
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
root@localhost:/home/miczeb15#

[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 07C000000 mask FFC000000 uncachable
[    0.000000]   1 base 000000000 mask F80000000 write-back
[    0.000000]   2 base 07BC00000 mask FFFC00000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] original variable MTRRs
[    0.000000] reg 0, base: 1984MB, range: 64MB, type UC
[    0.000000] reg 1, base: 0GB, range: 2GB, type WB
[    0.000000] reg 2, base: 1980MB, range: 4MB, type UC
[    0.000000] total RAM covered: 1980M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K     chunk_size: 128M     num_reg: 3      lose cover RAM: 0G
[    0.000000] New variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 1980MB, range: 4MB, type UC
[    0.000000] reg 2, base: 1984MB, range: 64MB, type UC
[    0.000000] found SMP MP-table at [mem 0x000f7310-0x000f731f] mapped at [c00f7310]
[    0.000000] initial memory mapped: [mem 0x00000000-0x00bfffff]
[    0.000000] Base memory trampoline at [c0099000] 99000 size 16384
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x36400000-0x367fffff]
[    0.000000]  [mem 0x36400000-0x367fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x30000000-0x363fffff]
[    0.000000]  [mem 0x30000000-0x363fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x2fffffff]
[    0.000000]  [mem 0x00100000-0x003fffff] page 4k
[    0.000000]  [mem 0x00400000-0x2fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x36800000-0x377fdfff]
[    0.000000]  [mem 0x36800000-0x373fffff] page 2M
[    0.000000]  [mem 0x37400000-0x377fdfff] page 4k
[    0.000000] BRK [0x00614000, 0x00614fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x36870000-0x3742ffff]
[    0.000000] ACPI: RSDP 000f7190 00024 (v02 PTLTD )
[    0.000000] ACPI: XSDT 7bbf44df 00064 (v01 ACRSYS ACRPRDCT 06040000 INNA 00000000)
[    0.000000] ACPI: FACP 7bbe4000 000F4 (v03 INTEL  CRESTLNE 06040000 ALAN 00000001)
[    0.000000] ACPI: DSDT 7bbe5000 0A4E7 (v02 Intel  CANTIGA  06040000 MSFT 03000000)
[    0.000000] ACPI: FACS 7bb9efc0 00040
[    0.000000] ACPI: HPET 7bbfed86 00038 (v01 INTEL  CRESTLNE 06040000 LOHR 0000005A)
[    0.000000] ACPI: MCFG 7bbfedbe 0003C (v01 INTEL  CRESTLNE 06040000 LOHR 0000005A)
[    0.000000] ACPI: SLIC 7bbfedfa 00176 (v01 ACRSYS ACRPRDCT 06040000 ANNI 00000001)
[    0.000000] ACPI: APIC 7bbfef70 00068 (v01 PTLTD  ? APIC   06040000  LTP 00000000)
[    0.000000] ACPI: BOOT 7bbfefd8 00028 (v01 PTLTD  $SBFTBL$ 06040000  LTP 00000001)
[    0.000000] ACPI: SSDT 7bbf457b 001BC (v01 BrtRef  DD01BRT 00001000 INTL 20050624)
[    0.000000] ACPI: SSDT 7bbe3000 00655 (v01  PmRef    CpuPm 00003000 INTL 20050624)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 1092MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000] BRK [0x00615000, 0x00615fff] PGTABLE
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   Normal   [mem 0x01000000-0x377fdfff]
[    0.000000]   HighMem  [mem 0x377fe000-0x7bbfffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009cfff]
[    0.000000]   node   0: [mem 0x00100000-0x7b6a0fff]
[    0.000000]   node   0: [mem 0x7b6a7000-0x7b7bbfff]
[    0.000000]   node   0: [mem 0x7b80f000-0x7b907fff]
[    0.000000]   node   0: [mem 0x7bb0f000-0x7bb17fff]
[    0.000000]   node   0: [mem 0x7bb1f000-0x7bb63fff]
[    0.000000]   node   0: [mem 0x7bb9f000-0x7bbe1fff]
[    0.000000]   node   0: [mem 0x7bbff000-0x7bbfffff]
[    0.000000] On node 0 totalpages: 506077
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   Normal zone: 1744 pages used for memmap
[    0.000000]   Normal zone: 223230 pages, LIFO batch:31
[    0.000000]   HighMem zone: 2185 pages used for memmap
[    0.000000]   HighMem zone: 278851 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[    0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
[    0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
[    0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000e4000
[    0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[    0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 12 pages/cpu @f743f000 s27200 r0 d21952 u49152
[    0.000000] pcpu-alloc: s27200 r0 d21952 u49152 alloc=12*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 504301
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.10-4.slh.1-aptosid-686 root=UUID=fddcf712-2c23-4a16-b73b-cce3c8b00536 ro quiet
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (000377fe:0007bc00)
[    0.000000] Memory: 1990076k/2027520k available (2975k kernel code, 34232k reserved, 1462k data, 404k init, 1115404k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff14000 - 0xfffff000   ( 940 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
[    0.000000]       .init : 0xc0556000 - 0xc05bb000   ( 404 kB)
[    0.000000]       .data : 0xc03e7ff2 - 0xc05558c0   (1462 kB)
[    0.000000]       .text : 0xc0100000 - 0xc03e7ff2   (2975 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]     RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000]     Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000]     RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
[    0.000000] NR_IRQS:2304 nr_irqs:512 16
[    0.000000] CPU 0 irqstacks, hard=f5408000 soft=f540a000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2161.368 MHz processor
[    0.001001] Calibrating delay loop (skipped), value calculated using timer frequency.. 4322.73 BogoMIPS (lpj=2161368)
[    0.001005] pid_max: default: 32768 minimum: 301
[    0.001033] Security Framework initialized
[    0.001036] SELinux:  Disabled at boot.
[    0.001047] Mount-cache hash table entries: 512
[    0.001249] Initializing cgroup subsys devices
[    0.001252] Initializing cgroup subsys freezer
[    0.001254] Initializing cgroup subsys net_cls
[    0.001257] Initializing cgroup subsys blkio
[    0.001259] Initializing cgroup subsys perf_event
[    0.001291] CPU: Physical Processor ID: 0
[    0.001293] CPU: Processor Core ID: 0
[    0.001296] mce: CPU supports 6 MCE banks
[    0.001303] CPU0: Thermal monitoring enabled (TM1)
[    0.001314] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[    0.001314] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
[    0.001314] tlb_flushall_shift: -1
[    0.001388] Freeing SMP alternatives: 8k freed
[    0.002040] ACPI: Core revision 20130328
[    0.006367] ACPI: All ACPI Tables successfully acquired
[    0.007081] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.007459] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.018360] smpboot: CPU0: Intel(R) Pentium(R) Dual  CPU  T3400  @ 2.16GHz (fam: 06, model: 0f, stepping: 0d)
[    0.019000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[    0.019000] perf_event_intel: PEBS disabled due to CPU errata
[    0.019000] ... version:                2
[    0.019000] ... bit width:              40
[    0.019000] ... generic registers:      2
[    0.019000] ... value mask:             000000ffffffffff
[    0.019000] ... max period:             000000007fffffff
[    0.019000] ... fixed-purpose events:   3
[    0.019000] ... event mask:             0000000700000003
[    0.026052] CPU 1 irqstacks, hard=f54b6000 soft=f54c0000
[    0.026055] smpboot: Booting Node   0, Processors  #1 OK
[    0.002000] Initializing CPU#1
[    0.038049] Brought up 2 CPUs
[    0.038053] smpboot: Total of 2 processors activated (8645.47 BogoMIPS)
[    0.039089] devtmpfs: initialized
[    0.039574] PM: Registering ACPI NVS region [mem 0x7bb64000-0x7bb9efff] (241664 bytes)
[    0.039574] NET: Registered protocol family 16
[    0.039574] ACPI: bus type PCI registered
[    0.040069] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.040073] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.040075] PCI: Using MMCONFIG for extended config space
[    0.040077] PCI: Using configuration type 1 for base access
[    0.040598] bio: create slab <bio-0> at 0
[    0.040598] ACPI: Added _OSI(Module Device)
[    0.040598] ACPI: Added _OSI(Processor Device)
[    0.040598] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.041006] ACPI: Added _OSI(Processor Aggregator Device)
[    0.042578] ACPI: EC: Look up EC in DSDT
[    0.046076] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.046808] ACPI: SSDT 7bb1ac20 00265 (v01  PmRef  Cpu0Ist 00003000 INTL 20050624)
[    0.047207] ACPI: Dynamic OEM Table Load:
[    0.047211] ACPI: SSDT   (null) 00265 (v01  PmRef  Cpu0Ist 00003000 INTL 20050624)
[    0.047324] ACPI: SSDT 7bb18620 00549 (v01  PmRef  Cpu0Cst 00003001 INTL 20050624)
[    0.047700] ACPI: Dynamic OEM Table Load:
[    0.047703] ACPI: SSDT   (null) 00549 (v01  PmRef  Cpu0Cst 00003001 INTL 20050624)
[    0.052254] ACPI: SSDT 7bb19ca0 001CF (v01  PmRef    ApIst 00003000 INTL 20050624)
[    0.052666] ACPI: Dynamic OEM Table Load:
[    0.052670] ACPI: SSDT   (null) 001CF (v01  PmRef    ApIst 00003000 INTL 20050624)
[    0.055090] ACPI: SSDT 7bb19f20 0008D (v01  PmRef    ApCst 00003000 INTL 20050624)
[    0.055312] ACPI: Dynamic OEM Table Load:
[    0.055315] ACPI: SSDT   (null) 0008D (v01  PmRef    ApCst 00003000 INTL 20050624)
[    0.072078] ACPI: Interpreter enabled
[    0.072095] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130328/hwxface-568)
[    0.072101] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130328/hwxface-568)
[    0.072117] ACPI: (supports S0 S3 S4 S5)
[    0.072120] ACPI: Using IOAPIC for interrupt routing
[    0.072156] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.072255] ACPI: No dock devices found.
[    0.083701] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.084484] PCI host bridge to bus 0000:00
[    0.084489] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.084493] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.084496] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.084499] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.084502] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[    0.084505] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[    0.084508] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[    0.084511] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[    0.084515] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff]
[    0.084529] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000
[    0.084558] DMAR: Forcing write-buffer flush capability
[    0.084560] DMAR: Disabling IOMMU for graphics on this chipset
[    0.084660] pci 0000:00:02.0: [8086:2a42] type 00 class 0x030000
[    0.084678] pci 0000:00:02.0: reg 10: [mem 0xf8000000-0xf83fffff 64bit]
[    0.084689] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.084697] pci 0000:00:02.0: reg 20: [io  0x1800-0x1807]
[    0.084774] pci 0000:00:02.1: [8086:2a43] type 00 class 0x038000
[    0.084788] pci 0000:00:02.1: reg 10: [mem 0xf8400000-0xf84fffff 64bit]
[    0.084950] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[    0.085008] pci 0000:00:1a.0: reg 20: [io  0x1820-0x183f]
[    0.085103] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.085147] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[    0.085205] pci 0000:00:1a.1: reg 20: [io  0x1840-0x185f]
[    0.085303] pci 0000:00:1a.1: System wakeup disabled by ACPI
[    0.085347] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
[    0.085400] pci 0000:00:1a.2: reg 20: [io  0x1860-0x187f]
[    0.085496] pci 0000:00:1a.2: System wakeup disabled by ACPI
[    0.085548] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[    0.085573] pci 0000:00:1a.7: reg 10: [mem 0xf8904000-0xf89043ff]
[    0.085681] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.085727] pci 0000:00:1a.7: System wakeup disabled by ACPI
[    0.085775] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[    0.085795] pci 0000:00:1b.0: reg 10: [mem 0xf8900000-0xf8903fff 64bit]
[    0.085878] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.085928] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.085971] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[    0.086061] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.086146] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400
[    0.086231] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.086320] pci 0000:00:1c.2: [8086:2944] type 01 class 0x060400
[    0.086405] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.086493] pci 0000:00:1c.3: [8086:2946] type 01 class 0x060400
[    0.086578] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.086670] pci 0000:00:1c.4: [8086:2948] type 01 class 0x060400
[    0.086754] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.086851] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[    0.086904] pci 0000:00:1d.0: reg 20: [io  0x1880-0x189f]
[    0.086989] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.087035] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[    0.087087] pci 0000:00:1d.1: reg 20: [io  0x18a0-0x18bf]
[    0.087171] pci 0000:00:1d.1: System wakeup disabled by ACPI
[    0.087216] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[    0.087270] pci 0000:00:1d.2: reg 20: [io  0x18c0-0x18df]
[    0.087357] pci 0000:00:1d.2: System wakeup disabled by ACPI
[    0.087409] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[    0.087435] pci 0000:00:1d.7: reg 10: [mem 0xf8904400-0xf89047ff]
[    0.087542] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.087582] pci 0000:00:1d.7: System wakeup disabled by ACPI
[    0.087624] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.087701] pci 0000:00:1e.0: System wakeup disabled by ACPI
[    0.087746] pci 0000:00:1f.0: [8086:2919] type 00 class 0x060100
[    0.087915] pci 0000:00:1f.2: [8086:2928] type 00 class 0x01018f
[    0.087935] pci 0000:00:1f.2: reg 10: [io  0x18f8-0x18ff]
[    0.087945] pci 0000:00:1f.2: reg 14: [io  0x180c-0x180f]
[    0.087956] pci 0000:00:1f.2: reg 18: [io  0x18f0-0x18f7]
[    0.087966] pci 0000:00:1f.2: reg 1c: [io  0x1808-0x180b]
[    0.087976] pci 0000:00:1f.2: reg 20: [io  0x18e0-0x18ef]
[    0.087987] pci 0000:00:1f.2: reg 24: [io  0x1810-0x181f]
[    0.088115] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[    0.088134] pci 0000:00:1f.3: reg 10: [mem 0x00000000-0x000000ff 64bit]
[    0.088161] pci 0000:00:1f.3: reg 20: [io  0x1c00-0x1c1f]
[    0.088272] pci 0000:00:1f.5: [8086:292d] type 00 class 0x010185
[    0.088291] pci 0000:00:1f.5: reg 10: [io  0x1c50-0x1c57]
[    0.088302] pci 0000:00:1f.5: reg 14: [io  0x1c44-0x1c47]
[    0.088312] pci 0000:00:1f.5: reg 18: [io  0x1c48-0x1c4f]
[    0.088322] pci 0000:00:1f.5: reg 1c: [io  0x1c40-0x1c43]
[    0.088333] pci 0000:00:1f.5: reg 20: [io  0x1c30-0x1c3f]
[    0.088343] pci 0000:00:1f.5: reg 24: [io  0x1c20-0x1c2f]
[    0.088701] pci 0000:02:00.0: [11ab:436b] type 00 class 0x020000
[    0.088882] pci 0000:02:00.0: reg 10: [mem 0xf8500000-0xf8503fff 64bit]
[    0.088983] pci 0000:02:00.0: reg 18: [io  0x2000-0x20ff]
[    0.089309] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[    0.089772] pci 0000:02:00.0: supports D1 D2
[    0.089775] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.089885] pci 0000:02:00.0: System wakeup disabled by ACPI
[    0.090028] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.090034] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.090039] pci 0000:00:1c.0:   bridge window [mem 0xf8500000-0xf85fffff]
[    0.090169] pci 0000:03:00.0: [8086:4229] type 00 class 0x028000
[    0.090225] pci 0000:03:00.0: reg 10: [mem 0xf8600000-0xf8601fff 64bit]
[    0.090423] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[    0.092042] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.092050] pci 0000:00:1c.1:   bridge window [mem 0xf8600000-0xf86fffff]
[    0.092120] pci 0000:00:1c.2: PCI bridge to [bus 04]
[    0.092197] pci 0000:00:1c.3: PCI bridge to [bus 05-07]
[    0.092202] pci 0000:00:1c.3:   bridge window [io  0x3000-0x3fff]
[    0.092208] pci 0000:00:1c.3:   bridge window [mem 0xf4000000-0xf5ffffff]
[    0.092215] pci 0000:00:1c.3:   bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
[    0.092280] pci 0000:00:1c.4: PCI bridge to [bus 08-0a]
[    0.092285] pci 0000:00:1c.4:   bridge window [io  0x4000-0x4fff]
[    0.092290] pci 0000:00:1c.4:   bridge window [mem 0xf6000000-0xf7ffffff]
[    0.092298] pci 0000:00:1c.4:   bridge window [mem 0xf2000000-0xf3ffffff 64bit pref]
[    0.092386] pci 0000:00:1e.0: PCI bridge to [bus 0d] (subtractive decode)
[    0.092398] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.092401] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.092405] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.092408] pci 0000:00:1e.0:   bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[    0.092411] pci 0000:00:1e.0:   bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[    0.092414] pci 0000:00:1e.0:   bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[    0.092417] pci 0000:00:1e.0:   bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[    0.092421] pci 0000:00:1e.0:   bridge window [mem 0x80000000-0xfebfffff] (subtractive decode)
[    0.092452] pci_bus 0000:00: on NUMA node 0
[    0.092456] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[    0.092459] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
[    0.092913] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 *11)
[    0.092977] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 *11)
[    0.093043] ACPI: PCI Interrupt Link [LNKC] (IRQs *10 11)
[    0.093104] ACPI: PCI Interrupt Link [LNKD] (IRQs *10 11)
[    0.093164] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 *11)
[    0.093225] ACPI: PCI Interrupt Link [LNKF] (IRQs *10 11)
[    0.093285] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
[    0.093347] ACPI: PCI Interrupt Link [LNKH] (IRQs *10 11)
[    0.093591] ACPI: Enabled 4 GPEs in block 00 to 3F
[    0.093599] acpi root: \_SB_.PCI0 notify handler is installed
[    0.093650] Found 1 acpi root devices
[    0.094024] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    0.094088] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.094088] vgaarb: loaded
[    0.094088] vgaarb: bridge control possible 0000:00:02.0
[    0.094088] PCI: Using ACPI for IRQ routing
[    0.101460] PCI: pci_cache_line_size set to 64 bytes
[    0.101642] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
[    0.101644] e820: reserve RAM buffer [mem 0x7b6a1000-0x7bffffff]
[    0.101648] e820: reserve RAM buffer [mem 0x7b7bc000-0x7bffffff]
[    0.101651] e820: reserve RAM buffer [mem 0x7b908000-0x7bffffff]
[    0.101653] e820: reserve RAM buffer [mem 0x7bb18000-0x7bffffff]
[    0.101656] e820: reserve RAM buffer [mem 0x7bb64000-0x7bffffff]
[    0.101659] e820: reserve RAM buffer [mem 0x7bbe2000-0x7bffffff]
[    0.101661] e820: reserve RAM buffer [mem 0x7bc00000-0x7bffffff]
[    0.101777] NetLabel: Initializing
[    0.101780] NetLabel:  domain hash size = 128
[    0.101781] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.101797] NetLabel:  unlabeled traffic allowed by default
[    0.101826] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[    0.101832] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.101837] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[    0.104017] Switching to clocksource hpet
[    0.104081] pnp: PnP ACPI init
[    0.104092] ACPI: bus type PNP registered
[    0.104216] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.104256] pnp 00:01: Plug and Play ACPI device, IDs SYN0302 SYN0300 SYN0002 PNP0f13 (active)
[    0.104268] pnp 00:02: [dma 4]
[    0.104290] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.104318] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
[    0.104425] system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.104429] system 00:04: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    0.104467] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.104533] system 00:06: [io  0x1200-0x120f] has been reserved
[    0.104537] system 00:06: [io  0x0480-0x048f] has been reserved
[    0.104541] system 00:06: [io  0xffff] has been reserved
[    0.104544] system 00:06: [io  0xffff] has been reserved
[    0.104548] system 00:06: [io  0x0400-0x047f] has been reserved
[    0.104551] system 00:06: [io  0x1180-0x11ff] has been reserved
[    0.104554] system 00:06: [io  0xfe00] has been reserved
[    0.104558] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.104593] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.104765] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.104769] system 00:08: [mem 0xfed10000-0xfed13fff] has been reserved
[    0.104773] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.104776] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.104780] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
[    0.104783] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.104787] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.104912] pnp: PnP ACPI: found 9 devices
[    0.104914] ACPI: bus type PNP unregistered
[    0.325899] PM-Timer running at invalid rate: 714% of normal - aborting.
[    0.325918] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x001fffff pref] to [bus 02] add_size 200000
[    0.325930] pci 0000:00:1c.1: bridge window [io  0x1000-0x0fff] to [bus 03] add_size 1000
[    0.325934] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
[    0.325945] pci 0000:00:1c.2: bridge window [io  0x1000-0x0fff] to [bus 04] add_size 1000
[    0.325949] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000
[    0.325953] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000
[    0.325984] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x001fffff pref] get_res_add_size add_size 200000
[    0.325988] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.325991] pci 0000:00:1c.2: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[    0.325995] pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.325998] pci 0000:00:1c.1: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[    0.326009] pci 0000:00:1c.2: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[    0.326016] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80000000-0x802fffff pref]
[    0.326021] pci 0000:00:1c.1: BAR 15: assigned [mem 0x80300000-0x804fffff 64bit pref]
[    0.326026] pci 0000:00:1c.2: BAR 14: assigned [mem 0x80500000-0x806fffff]
[    0.326031] pci 0000:00:1c.2: BAR 15: assigned [mem 0x80700000-0x808fffff 64bit pref]
[    0.326036] pci 0000:00:1c.1: BAR 13: assigned [io  0x5000-0x5fff]
[    0.326040] pci 0000:00:1c.2: BAR 13: assigned [io  0x6000-0x6fff]
[    0.326045] pci 0000:00:1f.3: BAR 0: assigned [mem 0x80900000-0x809000ff 64bit]
[    0.326058] pci 0000:02:00.0: BAR 6: assigned [mem 0x80000000-0x8001ffff pref]
[    0.326061] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.326065] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.326072] pci 0000:00:1c.0:   bridge window [mem 0xf8500000-0xf85fffff]
[    0.326077] pci 0000:00:1c.0:   bridge window [mem 0x80000000-0x802fffff pref]
[    0.326084] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.326088] pci 0000:00:1c.1:   bridge window [io  0x5000-0x5fff]
[    0.326095] pci 0000:00:1c.1:   bridge window [mem 0xf8600000-0xf86fffff]
[    0.326100] pci 0000:00:1c.1:   bridge window [mem 0x80300000-0x804fffff 64bit pref]
[    0.326107] pci 0000:00:1c.2: PCI bridge to [bus 04]
[    0.326111] pci 0000:00:1c.2:   bridge window [io  0x6000-0x6fff]
[    0.326117] pci 0000:00:1c.2:   bridge window [mem 0x80500000-0x806fffff]
[    0.326122] pci 0000:00:1c.2:   bridge window [mem 0x80700000-0x808fffff 64bit pref]
[    0.326130] pci 0000:00:1c.3: PCI bridge to [bus 05-07]
[    0.326134] pci 0000:00:1c.3:   bridge window [io  0x3000-0x3fff]
[    0.326140] pci 0000:00:1c.3:   bridge window [mem 0xf4000000-0xf5ffffff]
[    0.326145] pci 0000:00:1c.3:   bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
[    0.326152] pci 0000:00:1c.4: PCI bridge to [bus 08-0a]
[    0.326156] pci 0000:00:1c.4:   bridge window [io  0x4000-0x4fff]
[    0.326163] pci 0000:00:1c.4:   bridge window [mem 0xf6000000-0xf7ffffff]
[    0.326168] pci 0000:00:1c.4:   bridge window [mem 0xf2000000-0xf3ffffff 64bit pref]
[    0.326175] pci 0000:00:1e.0: PCI bridge to [bus 0d]
[    0.326567] pci 0000:00:1e.0: setting latency timer to 64
[    0.326572] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.326575] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.326578] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.326581] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
[    0.326584] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
[    0.326587] pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff]
[    0.326590] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000e3fff]
[    0.326593] pci_bus 0000:00: resource 11 [mem 0x80000000-0xfebfffff]
[    0.326596] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    0.326599] pci_bus 0000:02: resource 1 [mem 0xf8500000-0xf85fffff]
[    0.326602] pci_bus 0000:02: resource 2 [mem 0x80000000-0x802fffff pref]
[    0.326605] pci_bus 0000:03: resource 0 [io  0x5000-0x5fff]
[    0.326608] pci_bus 0000:03: resource 1 [mem 0xf8600000-0xf86fffff]
[    0.326611] pci_bus 0000:03: resource 2 [mem 0x80300000-0x804fffff 64bit pref]
[    0.326614] pci_bus 0000:04: resource 0 [io  0x6000-0x6fff]
[    0.326617] pci_bus 0000:04: resource 1 [mem 0x80500000-0x806fffff]
[    0.326620] pci_bus 0000:04: resource 2 [mem 0x80700000-0x808fffff 64bit pref]
[    0.326623] pci_bus 0000:05: resource 0 [io  0x3000-0x3fff]
[    0.326625] pci_bus 0000:05: resource 1 [mem 0xf4000000-0xf5ffffff]
[    0.326628] pci_bus 0000:05: resource 2 [mem 0xf0000000-0xf1ffffff 64bit pref]
[    0.326631] pci_bus 0000:08: resource 0 [io  0x4000-0x4fff]
[    0.326634] pci_bus 0000:08: resource 1 [mem 0xf6000000-0xf7ffffff]
[    0.326637] pci_bus 0000:08: resource 2 [mem 0xf2000000-0xf3ffffff 64bit pref]
[    0.326640] pci_bus 0000:0d: resource 4 [io  0x0000-0x0cf7]
[    0.326643] pci_bus 0000:0d: resource 5 [io  0x0d00-0xffff]
[    0.326646] pci_bus 0000:0d: resource 6 [mem 0x000a0000-0x000bffff]
[    0.326649] pci_bus 0000:0d: resource 7 [mem 0x000d4000-0x000d7fff]
[    0.326652] pci_bus 0000:0d: resource 8 [mem 0x000d8000-0x000dbfff]
[    0.326655] pci_bus 0000:0d: resource 9 [mem 0x000dc000-0x000dffff]
[    0.326658] pci_bus 0000:0d: resource 10 [mem 0x000e0000-0x000e3fff]
[    0.326661] pci_bus 0000:0d: resource 11 [mem 0x80000000-0xfebfffff]
[    0.326697] NET: Registered protocol family 2
[    0.326876] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[    0.326904] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.326933] TCP: Hash tables configured (established 8192 bind 8192)
[    0.326966] TCP: reno registered
[    0.326970] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.326981] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.327057] NET: Registered protocol family 1
[    0.327073] pci 0000:00:02.0: Boot video device
[    0.328372] PCI: CLS 64 bytes, default 64
[    0.328419] Unpacking initramfs...
[    0.665903] Freeing initrd memory: 12032k freed
[    0.673483] Simple Boot Flag at 0x57 set to 0x1
[    0.673866] audit: initializing netlink socket (disabled)
[    0.673883] type=2000 audit(1376132405.672:1): initialized
[    0.674207] bounce pool size: 64 pages
[    0.674221] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.675865] VFS: Disk quotas dquot_6.5.2
[    0.675923] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.676070] msgmni has been set to 1731
[    0.676373] alg: No test for stdrng (krng)
[    0.676382] Key type asymmetric registered
[    0.676385] Asymmetric key parser 'x509' registered
[    0.676430] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.676466] io scheduler noop registered
[    0.676468] io scheduler deadline registered
[    0.676500] io scheduler cfq registered (default)
[    0.676616] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[    0.676695] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[    0.676771] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[    0.676843] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
[    0.676921] pcieport 0000:00:1c.4: irq 44 for MSI/MSI-X
[    0.677109] intel_idle: does not run on family 6 model 15
[    0.677141] GHES: HEST is not enabled!
[    0.677198] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.677789] Linux agpgart interface v0.103
[    0.677893] libphy: Fixed MDIO Bus: probed
[    0.677938] i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.698450] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.698479] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.698558] mousedev: PS/2 mouse device common for all mice
[    0.699558] rtc_cmos 00:07: RTC can wake from S4
[    0.699686] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[    0.699713] rtc_cmos 00:07: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.699733] cpuidle: using governor ladder
[    0.699735] cpuidle: using governor menu
[    0.700184] TCP: cubic registered
[    0.700296] NET: Registered protocol family 10
[    0.700521] Key type dns_resolver registered
[    0.700650] Using IPI No-Shortcut mode
[    0.700752] registered taskstats version 1
[    0.700860] IMA: No TPM chip found, activating TPM-bypass!
[    0.701517] rtc_cmos 00:07: setting system clock to 2013-08-10 11:00:06 UTC (1376132406)
[    0.701662] Freeing unused kernel memory: 404k freed
[    0.719902] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.724165] dracut: dracut-7 (wheezy) dracut-
[    0.744347] device-mapper: uevent: version 1.0.3
[    0.744443] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
[    0.749350] udevd[97]: starting version 175
[    0.820077] ACPI: bus type USB registered
[    0.820184] usbcore: registered new interface driver usbfs
[    0.820198] usbcore: registered new interface driver hub
[    0.822586] usbcore: registered new device driver usb
[    0.822934] uhci_hcd: USB Universal Host Controller Interface driver
[    0.823104] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    0.823110] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    0.823118] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.823163] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001820
[    0.823208] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[    0.823211] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.823214] usb usb1: Product: UHCI Host Controller
[    0.823217] usb usb1: Manufacturer: Linux 3.10-4.slh.1-aptosid-686 uhci_hcd
[    0.823220] usb usb1: SerialNumber: 0000:00:1a.0
[    0.823363] hub 1-0:1.0: USB hub found
[    0.823370] hub 1-0:1.0: 2 ports detected
[    0.823587] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    0.823592] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    0.823601] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[    0.823627] uhci_hcd 0000:00:1a.1: irq 20, io base 0x00001840
[    0.823666] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    0.823670] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.823673] usb usb2: Product: UHCI Host Controller
[    0.823675] usb usb2: Manufacturer: Linux 3.10-4.slh.1-aptosid-686 uhci_hcd
[    0.823678] usb usb2: SerialNumber: 0000:00:1a.1
[    0.823811] hub 2-0:1.0: USB hub found
[    0.823817] hub 2-0:1.0: 2 ports detected
[    0.824069] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[    0.824075] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    0.824083] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3
[    0.824111] uhci_hcd 0000:00:1a.2: irq 20, io base 0x00001860
[    0.824152] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    0.824155] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.824158] usb usb3: Product: UHCI Host Controller
[    0.824161] usb usb3: Manufacturer: Linux 3.10-4.slh.1-aptosid-686 uhci_hcd
[    0.824163] usb usb3: SerialNumber: 0000:00:1a.2
[    0.824307] hub 3-0:1.0: USB hub found
[    0.824313] hub 3-0:1.0: 2 ports detected
[    0.824523] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.824529] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.824536] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[    0.824578] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001880
[    0.824623] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    0.824626] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.824629] usb usb4: Product: UHCI Host Controller
[    0.824632] usb usb4: Manufacturer: Linux 3.10-4.slh.1-aptosid-686 uhci_hcd
[    0.824635] usb usb4: SerialNumber: 0000:00:1d.0
[    0.824778] hub 4-0:1.0: USB hub found
[    0.824784] hub 4-0:1.0: 2 ports detected
[    0.824995] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.825000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.825026] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
[    0.825067] uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018a0
[    0.825108] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    0.825111] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.825114] usb usb5: Product: UHCI Host Controller
[    0.825117] usb usb5: Manufacturer: Linux 3.10-4.slh.1-aptosid-686 uhci_hcd
[    0.825120] usb usb5: SerialNumber: 0000:00:1d.1
[    0.825258] hub 5-0:1.0: USB hub found
[    0.825264] hub 5-0:1.0: 2 ports detected
[    0.825483] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.825488] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.825496] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
[    0.825537] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018c0
[    0.825580] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    0.825583] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.825586] usb usb6: Product: UHCI Host Controller
[    0.825589] usb usb6: Manufacturer: Linux 3.10-4.slh.1-aptosid-686 uhci_hcd
[    0.825592] usb usb6: SerialNumber: 0000:00:1d.2
[    0.825757] hub 6-0:1.0: USB hub found
[    0.825763] hub 6-0:1.0: 2 ports detected
[    0.852503] SCSI subsystem initialized
[    0.854141] ACPI: bus type ATA registered
[    0.858403] libata version 3.00 loaded.
[    0.858792] ata_piix 0000:00:1f.2: version 2.13
[    0.858912] ata_piix 0000:00:1f.2: MAP [
[    0.858914]  P0 -- P1 -- ]
[    0.858968] ata_piix 0000:00:1f.2: setting latency timer to 64
[    0.860691] scsi0 : ata_piix
[    0.860806] scsi1 : ata_piix
[    0.860861] ata1: SATA max UDMA/133 cmd 0x18f8 ctl 0x180c bmdma 0x18e0 irq 19
[    0.860866] ata2: SATA max UDMA/133 cmd 0x18f0 ctl 0x1808 bmdma 0x18e8 irq 19
[    0.861071] ata_piix 0000:00:1f.5: MAP [
[    0.861073]  P0 -- P1 -- ]
[    0.861126] ata_piix 0000:00:1f.5: setting latency timer to 64
[    0.861355] scsi2 : ata_piix
[    0.861430] scsi3 : ata_piix
[    0.861484] ata3: SATA max UDMA/133 cmd 0x1c50 ctl 0x1c44 bmdma 0x1c30 irq 19
[    0.861489] ata4: SATA max UDMA/133 cmd 0x1c48 ctl 0x1c40 bmdma 0x1c38 irq 19
[    1.125022] usb 2-1: new full-speed USB device number 2 using uhci_hcd
[    1.178845] ata3: SATA link down (SStatus 0 SControl 300)
[    1.189698] ata4: SATA link down (SStatus 0 SControl 300)
[    1.316054] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.318049] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.319342] ata1.00: ATA-8: Hitachi HTS543225L9A300, FBEOC40C, max UDMA/133
[    1.319346] ata1.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 0/32)
[    1.321139] ata2.00: ATAPI: Optiarc DVD RW AD-7590S, 1.B0, max UDMA/100
[    1.325754] ata1.00: configured for UDMA/133
[    1.325889] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54322 FBEO PQ: 0 ANSI: 5
[    1.327144] ata2.00: configured for UDMA/100
[    1.335443] scsi 1:0:0:0: CD-ROM            Optiarc  DVD RW AD-7590S  1.B0 PQ: 0 ANSI: 5
[    1.341829] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    1.341922] sd 0:0:0:0: [sda] Write Protect is off
[    1.341926] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.341962] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.345676] usb 2-1: New USB device found, idVendor=064e, idProduct=a103
[    1.345681] usb 2-1: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[    1.345684] usb 2-1: Product: Acer Crystal Eye webcam
[    1.345687] usb 2-1: Manufacturer: SuYin
[    1.345689] usb 2-1: SerialNumber: CN0314-SN30-OV03-VA-R02.03.02
[    1.351038] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.351042] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.351255] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.404679]  sda: sda1 sda2 < sda5 sda6 >
[    1.405209] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.456024] usb 3-1: new full-speed USB device number 2 using uhci_hcd
[    1.616155] usb 3-1: New USB device found, idVendor=0bda, idProduct=0158
[    1.616160] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.616163] usb 3-1: Product: USB2.0-CRW
[    1.616166] usb 3-1: Manufacturer: Generic
[    1.616169] usb 3-1: SerialNumber: 20071114173400000
[    1.629449] usbcore: registered new interface driver usb-storage
[    1.629890] ums-realtek 3-1:1.0: USB Mass Storage device detected
[    1.637194] scsi4 : usb-storage 3-1:1.0
[    1.637290] usbcore: registered new interface driver ums-realtek
[    1.675023] tsc: Refined TSC clocksource calibration: 2161.249 MHz
[    1.675029] Switching to clocksource tsc
[    1.892743] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[    1.965139] dracut: Checking ext4: /dev/disk/by-uuid/fddcf712-2c23-4a16-b73b-cce3c8b00536
[    1.965194] dracut: issuing e2fsck -a  /dev/disk/by-uuid/fddcf712-2c23-4a16-b73b-cce3c8b00536
[    2.034725] dracut: /dev/disk/by-uuid/fddcf712-2c23-4a16-b73b-cce3c8b00536: clean, 123691/14032896 files, 1985399/56101376 blocks
[    2.034976] dracut: Remounting /dev/disk/by-uuid/fddcf712-2c23-4a16-b73b-cce3c8b00536 with -o errors=remount-ro,ro
[    2.106030] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[    2.152182] dracut: Mounted root filesystem /dev/sda5
[    2.279793] dracut: Switching root
[    2.643177] scsi 4:0:0:0: Direct-Access     Generic- Multi-Card       1.00 PQ: 0 ANSI: 0 CCS
[    2.653161] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[    3.971745] udevd[440]: starting version 175
[    4.601307] wmi: Mapper loaded
[    4.611697] ACPI: AC Adapter [ADP1] (on-line)
[    4.635165] microcode: CPU0 sig=0x6fd, pf=0x80, revision=0xa1
[    4.652042] microcode: CPU1 sig=0x6fd, pf=0x80, revision=0xa1
[    4.652104] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    4.820804] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[    4.822347] ACPI: Lid Switch [LID0]
[    4.822430] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[    4.822485] ACPI: Sleep Button [SLPB]
[    4.822547] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    4.822586] ACPI: Power Button [PWRF]
[    4.846809] ACPI: Requesting acpi_cpufreq
[    4.851312] Monitor-Mwait will be used to enter C-1 state
[    4.851321] Monitor-Mwait will be used to enter C-2 state
[    4.851326] tsc: Marking TSC unstable due to TSC halts in idle
[    4.851337] ACPI: acpi_idle registered with cpuidle
[    4.851364] Switching to clocksource hpet
[    5.022952] thermal LNXTHERM:00: registered as thermal_zone0
[    5.022957] ACPI: Thermal Zone [TZS0] (66 C)
[    5.033645] ACPI: Battery Slot [BAT0] (battery present)
[    5.046193] thermal LNXTHERM:01: registered as thermal_zone1
[    5.046197] ACPI: Thermal Zone [TZS1] (68 C)
[    5.065240] ACPI Warning: 0x00001c00-0x00001c1f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130328/utaddress-251)
[    5.065248] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.073368] input: PC Speaker as /devices/platform/pcspkr/input/input4
[    5.205768] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    5.205771] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[    5.225462] media: Linux media interface: v0.10
[    5.225589] ehci-pci: EHCI PCI platform driver
[    5.225747] ehci-pci 0000:00:1a.7: setting latency timer to 64
[    5.246177] usb 2-1: USB disconnect, device number 2
[    5.246669] usb 3-1: USB disconnect, device number 2
[    5.247648] ehci-pci 0000:00:1a.7: EHCI Host Controller
[    5.247659] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 7
[    5.247676] ehci-pci 0000:00:1a.7: debug port 1
[    5.251604] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[    5.251618] ehci-pci 0000:00:1a.7: irq 20, io mem 0xf8904000
[    5.257039] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    5.257068] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
[    5.257072] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.257075] usb usb7: Product: EHCI Host Controller
[    5.257078] usb usb7: Manufacturer: Linux 3.10-4.slh.1-aptosid-686 ehci_hcd
[    5.257080] usb usb7: SerialNumber: 0000:00:1a.7
[    5.257240] hub 7-0:1.0: USB hub found
[    5.257247] hub 7-0:1.0: 6 ports detected
[    5.278068] hub 1-0:1.0: USB hub found
[    5.278074] hub 1-0:1.0: 2 ports detected
[    5.299105] hub 2-0:1.0: USB hub found
[    5.299113] hub 2-0:1.0: 2 ports detected
[    5.320103] hub 3-0:1.0: USB hub found
[    5.320111] hub 3-0:1.0: 2 ports detected
[    5.320340] ehci-pci 0000:00:1d.7: setting latency timer to 64
[    5.383160] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    5.383173] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 8
[    5.383192] ehci-pci 0000:00:1d.7: debug port 1
[    5.387094] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[    5.387105] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf8904400
[    5.393034] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    5.393058] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
[    5.393062] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.393065] usb usb8: Product: EHCI Host Controller
[    5.393068] usb usb8: Manufacturer: Linux 3.10-4.slh.1-aptosid-686 ehci_hcd
[    5.393071] usb usb8: SerialNumber: 0000:00:1d.7
[    5.393233] hub 8-0:1.0: USB hub found
[    5.393239] hub 8-0:1.0: 6 ports detected
[    5.401712] [drm] Initialized drm 1.1.0 20060810
[    5.402323] cfg80211: Calling CRDA to update world regulatory domain
[    5.414085] hub 4-0:1.0: USB hub found
[    5.414094] hub 4-0:1.0: 2 ports detected
[    5.435083] hub 5-0:1.0: USB hub found
[    5.435091] hub 5-0:1.0: 2 ports detected
[    5.456086] hub 6-0:1.0: USB hub found
[    5.456094] hub 6-0:1.0: 2 ports detected
[    5.461894] ACPI Warning: 0x00000428-0x0000042f SystemIO conflicts with Region \PMIO 1 (20130328/utaddress-251)
[    5.461903] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.461908] ACPI Warning: 0x000011b0-0x000011bf SystemIO conflicts with Region \GPIO 1 (20130328/utaddress-251)
[    5.461913] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.461915] ACPI Warning: 0x00001180-0x000011af SystemIO conflicts with Region \GPIO 1 (20130328/utaddress-251)
[    5.461920] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.461922] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    5.473906] agpgart-intel 0000:00:00.0: Intel GM45 Chipset
[    5.474054] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[    5.474546] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
[    5.474851] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[    5.482828] acer_wmi: Acer Laptop ACPI-WMI Extras
[    5.493730] acer_wmi: Function bitmap for Communication Device: 0x0
[    5.494266] acer_wmi: Brightness must be controlled by acpi video driver
[    5.494466] input: Acer BMA150 accelerometer as /devices/virtual/input/input5
[    5.507961] iTCO_vendor_support: vendor-support=0
[    5.508513] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[    5.508551] iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0460)
[    5.508684] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    5.535333] Linux video capture interface: v2.00
[    5.559046] usb 7-3: new high-speed USB device number 2 using ehci-pci
[    5.713434] usb 7-3: New USB device found, idVendor=064e, idProduct=a103
[    5.713439] usb 7-3: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[    5.713442] usb 7-3: Product: Acer Crystal Eye webcam
[    5.713445] usb 7-3: Manufacturer: SuYin
[    5.713447] usb 7-3: SerialNumber: CN0314-SN30-OV03-VA-R02.03.02
[    5.818051] usb 7-5: new high-speed USB device number 3 using ehci-pci
[    5.884996] uvcvideo: Found UVC 1.00 device Acer Crystal Eye webcam (064e:a103)
[    5.901449] input: Acer Crystal Eye webcam as /devices/pci0000:00/0000:00:1a.7/usb7/7-3/7-3:1.0/input/input6
[    5.901540] usbcore: registered new interface driver uvcvideo
[    5.901543] USB Video Class driver (1.1.1)
[    5.923887] iwl4965: Intel(R) Wireless WiFi 4965 driver for Linux, in-tree:
[    5.923891] iwl4965: Copyright(c) 2003-2011 Intel Corporation
[    5.924125] iwl4965 0000:03:00.0: Detected Intel(R) Wireless WiFi Link 4965AGN, REV=0x4
[    5.943803] usb 7-5: New USB device found, idVendor=0bda, idProduct=0158
[    5.943807] usb 7-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    5.943810] usb 7-5: Product: USB2.0-CRW
[    5.943813] usb 7-5: Manufacturer: Generic
[    5.943815] usb 7-5: SerialNumber: 20071114173400000
[    5.945886] sky2: driver version 1.30
[    5.946170] sky2 0000:02:00.0: Yukon-2 Extreme chip revision 2
[    5.946635] sky2 0000:02:00.0: irq 45 for MSI/MSI-X
[    5.947728] sky2 0000:02:00.0 eth0: addr 00:1d:72:ef:13:95
[    5.948594] ums-realtek 7-5:1.0: USB Mass Storage device detected
[    5.959600] scsi5 : usb-storage 7-5:1.0
[    5.975268] iwl4965 0000:03:00.0: device EEPROM VER=0x36, CALIB=0x5
[    5.975288] iwl4965 0000:03:00.0: Tunable channels: 13 802.11bg, 19 802.11a channels
[    5.975383] iwl4965 0000:03:00.0: irq 46 for MSI/MSI-X
[    6.037904] [drm] Memory usable by graphics device = 2048M
[    6.037914] i915 0000:00:02.0: setting latency timer to 64
[    6.038121] i915 0000:00:02.0: irq 47 for MSI/MSI-X
[    6.038131] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    6.038133] [drm] Driver supports precise vblank timestamp query.
[    6.038190] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    6.094027] fbcon: inteldrmfb (fb0) is primary device
[    6.096770] i915: fixme: max PWM is zero
[    6.170261] iwl4965 0000:03:00.0: loaded firmware version 228.61.2.24
[    6.372304] ieee80211 phy0: Selected rate control algorithm 'iwl-4965-rs'
[    6.491291] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa44000/0xa0000, board id: 3655, fw id: 529512
[    6.566023] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[    6.589922] Console: switching to colour frame buffer device 170x48
[    6.595664] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    6.595667] i915 0000:00:02.0: registered panic notifier
[    6.627865] acpi device:02: registered as cooling_device2
[    6.627967] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    6.628045] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input8
[    6.628154] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    6.926051] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[    6.963440] scsi 5:0:0:0: Direct-Access     Generic- Multi-Card       1.00 PQ: 0 ANSI: 0 CCS
[    6.969323] sd 5:0:0:0: [sdb] Attached SCSI removable disk
[    6.970973] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    6.971148] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    7.016163] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    7.016373] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    7.017123] sd 5:0:0:0: Attached scsi generic sg2 type 0
[    9.362339] Adding 4045820k swap on /dev/sda6.  Priority:-1 extents:1 across:4045820k FS
[    9.413940] EXT4-fs (sda5): re-mounted. Opts: (null)
[    9.997539] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[   10.855250] loop: module loaded
[   12.876822] RPC: Registered named UNIX socket transport module.
[   12.876827] RPC: Registered udp transport module.
[   12.876829] RPC: Registered tcp transport module.
[   12.876830] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   12.943914] FS-Cache: Loaded
[   12.966343] FS-Cache: Netfs 'nfs' registered for caching
[   13.026947] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   16.995448] Bluetooth: Core ver 2.16
[   16.995477] NET: Registered protocol family 31
[   16.995479] Bluetooth: HCI device and connection manager initialized
[   16.995497] Bluetooth: HCI socket layer initialized
[   16.995500] Bluetooth: L2CAP socket layer initialized
[   16.995508] Bluetooth: SCO socket layer initialized
[   17.042755] Bluetooth: RFCOMM TTY layer initialized
[   17.042773] Bluetooth: RFCOMM socket layer initialized
[   17.042776] Bluetooth: RFCOMM ver 1.11
[   17.156772] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   17.156776] Bluetooth: BNEP filters: protocol multicast
[   17.156788] Bluetooth: BNEP socket layer initialized
[   18.184727] lp: driver loaded but no devices found
[   18.823817] ppdev: user-space parallel port driver
[   19.482618] sky2 0000:02:00.0 eth0: enabling interface
[   19.482940] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   19.728000] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   20.625115] NET: Registered protocol family 17
[   25.110042] wlan0: authenticate with 4c:09:b4:1b:c2:7a
[   25.127676] wlan0: send auth to 4c:09:b4:1b:c2:7a (try 1/3)
[   25.130097] wlan0: authenticated
[   25.131035] wlan0: associate with 4c:09:b4:1b:c2:7a (try 1/3)
[   25.134945] wlan0: RX AssocResp from 4c:09:b4:1b:c2:7a (capab=0x431 status=0 aid=2)
[   25.165490] wlan0: associated
[   25.165550] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   33.876085] usb 8-1: new high-speed USB device number 2 using ehci-pci
[   33.991430] usb 8-1: New USB device found, idVendor=0421, idProduct=0302
[   33.991435] usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   33.991438] usb 8-1: Product: N8-00
[   33.991441] usb 8-1: Manufacturer: Nokia
[   33.991444] usb 8-1: SerialNumber: 351661053060228
[   34.102294] usbcore: registered new interface driver cdc_ether
[   34.150053] cdc_acm 8-1:1.1: ttyACM0: USB ACM device
[   34.150804] cdc_acm 8-1:1.3: ttyACM1: USB ACM device
[   34.151260] usbcore: registered new interface driver cdc_acm
[   34.151264] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[   34.249056] usbcore: registered new interface driver rndis_host
[   34.329300] usbcore: registered new interface driver rndis_wlan
[   58.384017] sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
[   58.386380] sd 5:0:0:0: [sdb] Asking for cache data failed
[   58.386385] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[  110.094987] sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
[  110.097353] sd 5:0:0:0: [sdb] Asking for cache data failed
[  110.097360] sd 5:0:0:0: [sdb] Assuming drive cache: write through
root@localhost:/home/miczeb15#