Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!

Ogłoszenie

Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.

#1  2013-02-07 22:58:26

  compix - Użytkownik

compix
Użytkownik
Zarejestrowany: 2012-05-25

Problem z tapetą, i ikonami. Po jakimś czasie stają się niewyraźne.

Witam,

kolejny niestety problem. Pojawił się znikąd, a objawia się `psującą tapetą`. Po uruchomieniu laptopa działa wszystko okej, ale po jakimś czasie, zawsze innym. Nie zauważyłem by się to stało po jakieś określonej akcji.


Na dole zamieszczam screena gdy pracowałem na środowisku gnome, pojawiało się czasem również takie `artefakty` na ikonach w górnej belce, lub na jakieś stronie internetowej. W przypadku strony internetowej wystarczy odświeżyć, w przypadku tapety wylogować się i zalogować ponownie, lub zmienić tapetę. W środowisku XFCE również podobna sytuacja. Jeśli podać jakieś dodatkowej informacje to nie ma problemu. :)

Zauważyłem również że cały system wolniej działa od czasu kiedy `pulpit` się psuje. Może to moje odczucie, ale czasem potrafi mocno zwolnić.

Wykluczam uszkodzenie sprzętowe, aczkolwiek pamięci RAM nie podejrzewam [na innych systemie działa wszystko w porządku], poza tym na pamięć RAM to nie wygląda, a to jest jedyny element którego w pełni nie testowałem. Nie mam wolnej chwili by zostawić na kilka godzin laptop włączony z memtestem, a  żonglowanie kościami również odpada z braku czasu. Reszta sprzętu jest ok


/etc/X11/xorg.conf   jest pusty


/var/log/Xorg.0.log


Kod:

[    25.228] 
X.Org X Server 1.12.4
Release Date: 2012-08-27
[    25.228] X Protocol Version 11, Revision 0
[    25.228] Build Operating System: Linux 2.6.32-5-amd64 i686 Debian
[    25.228] Current Operating System: Linux debian 3.2.0-4-686-pae #1 SMP Debian 3.2.35-2 i686
[    25.228] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-686-pae root=UUID=f67b3217-4c69-4b26-9ab9-165085f50eda ro ipv6.disable=1 quiet
[    25.228] Build Date: 29 November 2012  08:52:43PM
[    25.228] xorg-server 2:1.12.4-4 (Julien Cristau <jcristau@debian.org>) 
[    25.228] Current version of pixman: 0.26.0
[    25.228]     Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[    25.228] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    25.228] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Feb  7 20:43:45 2013
[    25.334] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    25.355] (==) No Layout section.  Using the first Screen section.
[    25.355] (==) No screen section available. Using defaults.
[    25.355] (**) |-->Screen "Default Screen Section" (0)
[    25.355] (**) |   |-->Monitor "<default monitor>"
[    25.366] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
[    25.366] (==) Automatically adding devices
[    25.366] (==) Automatically enabling devices
[    25.584] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    25.584]     Entry deleted from font path.
[    25.756] (==) FontPath set to:
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/100dpi/:unscaled,
    /usr/share/fonts/X11/75dpi/:unscaled,
    /usr/share/fonts/X11/Type1,
    /usr/share/fonts/X11/100dpi,
    /usr/share/fonts/X11/75dpi,
    /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
    built-ins
[    25.756] (==) ModulePath set to "/usr/lib/xorg/modules"
[    25.756] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
[    25.756] (II) Loader magic: 0xb778d5a0
[    25.756] (II) Module ABI versions:
[    25.756]     X.Org ANSI C Emulation: 0.4
[    25.756]     X.Org Video Driver: 12.1
[    25.756]     X.Org XInput driver : 16.0
[    25.756]     X.Org Server Extension : 6.0
[    25.757] (--) PCI:*(0:0:2:0) 8086:2a02:1028:0254 rev 3, Mem @ 0xf6e00000/1048576, 0xe0000000/268435456, I/O @ 0x0000eff8/8
[    25.758] (--) PCI: (0:0:2:1) 8086:2a03:1028:0254 rev 3, Mem @ 0xf6f00000/1048576
[    25.758] (II) Open ACPI successful (/var/run/acpid.socket)
[    25.758] (II) LoadModule: "extmod"
[    25.770] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    25.843] (II) Module extmod: vendor="X.Org Foundation"
[    25.843]     compiled for 1.12.4, module version = 1.0.0
[    25.843]     Module class: X.Org Server Extension
[    25.843]     ABI class: X.Org Server Extension, version 6.0
[    25.843] (II) Loading extension SELinux
[    25.843] (II) Loading extension MIT-SCREEN-SAVER
[    25.843] (II) Loading extension XFree86-VidModeExtension
[    25.843] (II) Loading extension XFree86-DGA
[    25.843] (II) Loading extension DPMS
[    25.843] (II) Loading extension XVideo
[    25.843] (II) Loading extension XVideo-MotionCompensation
[    25.843] (II) Loading extension X-Resource
[    25.843] (II) LoadModule: "dbe"
[    25.844] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    25.867] (II) Module dbe: vendor="X.Org Foundation"
[    25.867]     compiled for 1.12.4, module version = 1.0.0
[    25.867]     Module class: X.Org Server Extension
[    25.867]     ABI class: X.Org Server Extension, version 6.0
[    25.867] (II) Loading extension DOUBLE-BUFFER
[    25.867] (II) LoadModule: "glx"
[    25.867] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    25.892] (II) Module glx: vendor="X.Org Foundation"
[    25.892]     compiled for 1.12.4, module version = 1.0.0
[    25.892]     ABI class: X.Org Server Extension, version 6.0
[    25.892] (==) AIGLX enabled
[    25.892] (II) Loading extension GLX
[    25.892] (II) LoadModule: "record"
[    25.893] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    25.893] (II) Module record: vendor="X.Org Foundation"
[    25.893]     compiled for 1.12.4, module version = 1.13.0
[    25.893]     Module class: X.Org Server Extension
[    25.893]     ABI class: X.Org Server Extension, version 6.0
[    25.893] (II) Loading extension RECORD
[    25.893] (II) LoadModule: "dri"
[    25.894] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    25.909] (II) Module dri: vendor="X.Org Foundation"
[    25.909]     compiled for 1.12.4, module version = 1.0.0
[    25.909]     ABI class: X.Org Server Extension, version 6.0
[    25.909] (II) Loading extension XFree86-DRI
[    25.909] (II) LoadModule: "dri2"
[    25.910] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    25.910] (II) Module dri2: vendor="X.Org Foundation"
[    25.911]     compiled for 1.12.4, module version = 1.2.0
[    25.911]     ABI class: X.Org Server Extension, version 6.0
[    25.911] (II) Loading extension DRI2
[    25.911] (==) Matched intel as autoconfigured driver 0
[    25.911] (==) Matched vesa as autoconfigured driver 1
[    25.911] (==) Matched fbdev as autoconfigured driver 2
[    25.911] (==) Assigned the driver to the xf86ConfigLayout
[    25.911] (II) LoadModule: "intel"
[    25.911] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    26.032] (II) Module intel: vendor="X.Org Foundation"
[    26.032]     compiled for 1.12.3.902, module version = 2.19.0
[    26.032]     Module class: X.Org Video Driver
[    26.032]     ABI class: X.Org Video Driver, version 12.1
[    26.032] (II) LoadModule: "vesa"
[    26.032] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    26.045] (II) Module vesa: vendor="X.Org Foundation"
[    26.045]     compiled for 1.12.1, module version = 2.3.1
[    26.045]     Module class: X.Org Video Driver
[    26.045]     ABI class: X.Org Video Driver, version 12.0
[    26.045] (II) LoadModule: "fbdev"
[    26.045] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    26.056] (II) Module fbdev: vendor="X.Org Foundation"
[    26.056]     compiled for 1.12.1, module version = 0.4.2
[    26.056]     ABI class: X.Org Video Driver, version 12.0
[    26.056] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
    965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
    4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
    Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
    Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
    Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
    Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
    Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
    Ivybridge Server (GT2)
[    26.057] (II) VESA: driver for VESA chipsets: vesa
[    26.057] (II) FBDEV: driver for framebuffer: fbdev
[    26.057] (++) using VT number 7

[    26.065] (WW) Falling back to old probe method for vesa
[    26.065] (WW) Falling back to old probe method for fbdev
[    26.065] (II) Loading sub module "fbdevhw"
[    26.065] (II) LoadModule: "fbdevhw"
[    26.065] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    26.162] (II) Module fbdevhw: vendor="X.Org Foundation"
[    26.162]     compiled for 1.12.4, module version = 0.0.2
[    26.162]     ABI class: X.Org Video Driver, version 12.1
[    26.162] drmOpenDevice: node name is /dev/dri/card0
[    26.162] drmOpenDevice: open result is 9, (OK)
[    26.169] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[    26.169] drmOpenDevice: node name is /dev/dri/card0
[    26.169] drmOpenDevice: open result is 9, (OK)
[    26.169] drmOpenByBusid: drmOpenMinor returns 9
[    26.169] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[    26.169] (II) intel(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
[    26.169] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    26.169] (==) intel(0): RGB weight 888
[    26.169] (==) intel(0): Default visual is TrueColor
[    26.169] (II) intel(0): Integrated Graphics Chipset: Intel(R) 965GM
[    26.169] (--) intel(0): Chipset: "965GM"
[    26.169] (**) intel(0): Relaxed fencing enabled
[    26.169] (**) intel(0): Wait on SwapBuffers? enabled
[    26.169] (**) intel(0): Triple buffering? enabled
[    26.169] (**) intel(0): Framebuffer tiled
[    26.169] (**) intel(0): Pixmaps tiled
[    26.169] (**) intel(0): 3D buffers tiled
[    26.243] (**) intel(0): SwapBuffers wait enabled
[    26.243] (==) intel(0): video overlay key set to 0x101fe
[    26.243] (II) intel(0): Output LVDS1 has no monitor section
[    26.244] (II) intel(0): found backlight control interface /sys/class/backlight/intel_backlight
[    26.260] (II) intel(0): Output VGA1 has no monitor section
[    26.276] (II) intel(0): Output HDMI1 has no monitor section
[    26.276] (II) intel(0): EDID for output LVDS1
[    26.276] (II) intel(0): Manufacturer: LPL  Model: 0  Serial#: 0
[    26.276] (II) intel(0): Year: 2008  Week: 0
[    26.276] (II) intel(0): EDID Version: 1.3
[    26.276] (II) intel(0): Digital Display Input
[    26.276] (II) intel(0): Max Image Size [cm]: horiz.: 33  vert.: 21
[    26.276] (II) intel(0): Gamma: 2.20
[    26.276] (II) intel(0): No DPMS capabilities specified
[    26.276] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    26.276] (II) intel(0): First detailed timing is preferred mode
[    26.276] (II) intel(0): redX: 0.600 redY: 0.351   greenX: 0.325 greenY: 0.554
[    26.276] (II) intel(0): blueX: 0.154 blueY: 0.145   whiteX: 0.313 whiteY: 0.329
[    26.276] (II) intel(0): Manufacturer's mask: 0
[    26.276] (II) intel(0): Supported detailed timing:
[    26.276] (II) intel(0): clock: 66.1 MHz   Image Size:  331 x 2070 mm
[    26.276] (II) intel(0): h_active: 1280  h_sync: 1304  h_sync_end 1328 h_blank_end 1352 h_border: 0
[    26.276] (II) intel(0): v_active: 800  v_sync: 803  v_sync_end 809 v_blanking: 816 v_border: 0
[    26.276] (II) intel(0): Supported detailed timing:
[    26.276] (II) intel(0): clock: 66.1 MHz   Image Size:  331 x 2070 mm
[    26.276] (II) intel(0): h_active: 1280  h_sync: 1304  h_sync_end 1328 h_blank_end 1352 h_border: 0
[    26.276] (II) intel(0): v_active: 800  v_sync: 803  v_sync_end 809 v_blanking: 816 v_border: 0
[    26.276] (II) intel(0):  WU682\81154WX5
[    26.276] (II) intel(0): Unknown vendor-specific block 0
[    26.276] (II) intel(0): EDID (in hex):
[    26.276] (II) intel(0):     00ffffffffffff00320c000000000000
[    26.276] (II) intel(0):     00120103902115780ab7859959538d27
[    26.276] (II) intel(0):     25505400000001010101010101010101
[    26.276] (II) intel(0):     010101010101d1190048502010301818
[    26.276] (II) intel(0):     36004bcf1000001bd119004850201030
[    26.276] (II) intel(0):     181836004bcf1000001b000000fe0057
[    26.276] (II) intel(0):     55363832813135345758350a00000000
[    26.276] (II) intel(0):     0024323d45688ba7ff01010a20200032
[    26.276] (II) intel(0): EDID vendor "LPL", prod id 0
[    26.276] (II) intel(0):     EDID quirk: Detailed timings give vertical size in cm.
[    26.319] (II) intel(0): Printing DDC gathered Modelines:
[    26.319] (II) intel(0): Modeline "1280x800"x0.0   66.09  1280 1304 1328 1352  800 803 809 816 +hsync -vsync (48.9 kHz eP)
[    26.319] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[    26.319] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    26.319] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    26.319] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[    26.319] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[    26.319] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[    26.319] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[    26.319] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[    26.319] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[    26.319] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[    26.319] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[    26.319] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[    26.319] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[    26.319] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[    26.319] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[    26.319] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[    26.319] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[    26.319] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[    26.319] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[    26.319] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[    26.319] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[    26.319] (II) intel(0): Printing probed modes for output LVDS1
[    26.319] (II) intel(0): Modeline "1280x800"x59.9   66.09  1280 1304 1328 1352  800 803 809 816 +hsync -vsync (48.9 kHz eP)
[    26.319] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[    26.319] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[    26.319] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[    26.320] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[    26.336] (II) intel(0): EDID for output VGA1
[    26.352] (II) intel(0): EDID for output HDMI1
[    26.352] (II) intel(0): Output LVDS1 connected
[    26.352] (II) intel(0): Output VGA1 disconnected
[    26.352] (II) intel(0): Output HDMI1 disconnected
[    26.352] (II) intel(0): Using exact sizes for initial modes
[    26.352] (II) intel(0): Output LVDS1 using initial mode 1280x800
[    26.352] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    26.352] (II) intel(0): Kernel page flipping support detected, enabling
[    26.352] (**) intel(0): Display dimensions: (330, 210) mm
[    26.352] (**) intel(0): DPI set to (98, 96)
[    26.352] (II) Loading sub module "fb"
[    26.352] (II) LoadModule: "fb"
[    26.352] (II) Loading /usr/lib/xorg/modules/libfb.so
[    26.419] (II) Module fb: vendor="X.Org Foundation"
[    26.419]     compiled for 1.12.4, module version = 1.0.0
[    26.419]     ABI class: X.Org ANSI C Emulation, version 0.4
[    26.419] (II) Loading sub module "dri2"
[    26.419] (II) LoadModule: "dri2"
[    26.419] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    26.420] (II) Module dri2: vendor="X.Org Foundation"
[    26.420]     compiled for 1.12.4, module version = 1.2.0
[    26.420]     ABI class: X.Org Server Extension, version 6.0
[    26.420] (II) UnloadModule: "vesa"
[    26.420] (II) Unloading vesa
[    26.420] (II) UnloadModule: "fbdev"
[    26.420] (II) Unloading fbdev
[    26.420] (II) UnloadSubModule: "fbdevhw"
[    26.420] (II) Unloading fbdevhw
[    26.420] (==) Depth 24 pixmap format is 32 bpp
[    26.420] (II) intel(0): [DRI2] Setup complete
[    26.420] (II) intel(0): [DRI2]   DRI driver: i965
[    26.420] (II) intel(0): Allocated new frame buffer 1280x800 stride 5120, tiled
[    26.469] (II) UXA(0): Driver registered support for the following operations:
[    26.469] (II)         solid
[    26.469] (II)         copy
[    26.469] (II)         composite (RENDER acceleration)
[    26.469] (II)         put_image
[    26.469] (II)         get_image
[    26.469] (==) intel(0): Backing store disabled
[    26.469] (==) intel(0): Silken mouse enabled
[    26.469] (II) intel(0): Initializing HW Cursor
[    26.469] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    26.470] (==) intel(0): DPMS enabled
[    26.470] (==) intel(0): Intel XvMC decoder enabled
[    26.470] (II) intel(0): Set up textured video
[    26.470] (II) intel(0): Set up overlay video
[    26.470] (II) intel(0): [XvMC] i965_xvmc driver initialized.
[    26.470] (II) intel(0): direct rendering: DRI2 Enabled
[    26.470] (==) intel(0): hotplug detection: "enabled"
[    26.492] (--) RandR disabled
[    26.492] (II) Initializing built-in extension Generic Event Extension
[    26.492] (II) Initializing built-in extension SHAPE
[    26.492] (II) Initializing built-in extension MIT-SHM
[    26.492] (II) Initializing built-in extension XInputExtension
[    26.492] (II) Initializing built-in extension XTEST
[    26.492] (II) Initializing built-in extension BIG-REQUESTS
[    26.492] (II) Initializing built-in extension SYNC
[    26.492] (II) Initializing built-in extension XKEYBOARD
[    26.492] (II) Initializing built-in extension XC-MISC
[    26.492] (II) Initializing built-in extension SECURITY
[    26.492] (II) Initializing built-in extension XINERAMA
[    26.492] (II) Initializing built-in extension XFIXES
[    26.492] (II) Initializing built-in extension RENDER
[    26.492] (II) Initializing built-in extension RANDR
[    26.492] (II) Initializing built-in extension COMPOSITE
[    26.492] (II) Initializing built-in extension DAMAGE
[    26.492] (II) SELinux: Disabled on system
[    26.785] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    26.785] (II) AIGLX: enabled GLX_INTEL_swap_event
[    26.785] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    26.785] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    26.785] (II) AIGLX: Loaded and initialized i965
[    26.785] (II) GLX: Initialized DRI2 GL provider for screen 0
[    26.786] (II) intel(0): Setting screen physical size to 338 x 211
[    27.312] (II) config/udev: Adding input device Video Bus (/dev/input/event14)
[    27.312] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    27.312] (II) LoadModule: "evdev"
[    27.325] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    27.338] (II) Module evdev: vendor="X.Org Foundation"
[    27.338]     compiled for 1.12.1, module version = 2.7.0
[    27.338]     Module class: X.Org XInput Driver
[    27.338]     ABI class: X.Org XInput driver, version 16.0
[    27.338] (II) Using input driver 'evdev' for 'Video Bus'
[    27.338] (**) Video Bus: always reports core events
[    27.338] (**) evdev: Video Bus: Device: "/dev/input/event14"
[    27.338] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    27.338] (--) evdev: Video Bus: Found keys
[    27.338] (II) evdev: Video Bus: Configuring as keyboard
[    27.338] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:01/input/input14/event14"
[    27.338] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 6)
[    27.338] (**) Option "xkb_rules" "evdev"
[    27.338] (**) Option "xkb_model" "pc105"
[    27.338] (**) Option "xkb_layout" "pl"
[    27.391] (II) config/udev: Adding input device Power Button (/dev/input/event8)
[    27.391] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    27.391] (II) Using input driver 'evdev' for 'Power Button'
[    27.391] (**) Power Button: always reports core events
[    27.391] (**) evdev: Power Button: Device: "/dev/input/event8"
[    27.391] (--) evdev: Power Button: Vendor 0 Product 0x1
[    27.391] (--) evdev: Power Button: Found keys
[    27.391] (II) evdev: Power Button: Configuring as keyboard
[    27.391] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input8/event8"
[    27.392] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    27.392] (**) Option "xkb_rules" "evdev"
[    27.392] (**) Option "xkb_model" "pc105"
[    27.392] (**) Option "xkb_layout" "pl"
[    27.392] (II) config/udev: Adding input device Lid Switch (/dev/input/event7)
[    27.392] (II) No input driver specified, ignoring this device.
[    27.392] (II) This device may have been added with another device file.
[    27.393] (II) config/udev: Adding input device Sleep Button (/dev/input/event9)
[    27.393] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    27.393] (II) Using input driver 'evdev' for 'Sleep Button'
[    27.393] (**) Sleep Button: always reports core events
[    27.393] (**) evdev: Sleep Button: Device: "/dev/input/event9"
[    27.393] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[    27.393] (--) evdev: Sleep Button: Found keys
[    27.393] (II) evdev: Sleep Button: Configuring as keyboard
[    27.393] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input9/event9"
[    27.393] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[    27.393] (**) Option "xkb_rules" "evdev"
[    27.393] (**) Option "xkb_model" "pc105"
[    27.393] (**) Option "xkb_layout" "pl"
[    27.394] (II) config/udev: Adding input device HID 413c:8157 (/dev/input/event3)
[    27.394] (**) HID 413c:8157: Applying InputClass "evdev keyboard catchall"
[    27.394] (II) Using input driver 'evdev' for 'HID 413c:8157'
[    27.394] (**) HID 413c:8157: always reports core events
[    27.394] (**) evdev: HID 413c:8157: Device: "/dev/input/event3"
[    27.394] (--) evdev: HID 413c:8157: Vendor 0x413c Product 0x8157
[    27.394] (--) evdev: HID 413c:8157: Found keys
[    27.394] (II) evdev: HID 413c:8157: Configuring as keyboard
[    27.394] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input3/event3"
[    27.394] (II) XINPUT: Adding extended input device "HID 413c:8157" (type: KEYBOARD, id 9)
[    27.394] (**) Option "xkb_rules" "evdev"
[    27.394] (**) Option "xkb_model" "pc105"
[    27.394] (**) Option "xkb_layout" "pl"
[    27.395] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event16)
[    27.395] (II) No input driver specified, ignoring this device.
[    27.395] (II) This device may have been added with another device file.
[    27.395] (II) config/udev: Adding input device HDA Intel HDMI/DP,pcm=3 (/dev/input/event17)
[    27.395] (II) No input driver specified, ignoring this device.
[    27.395] (II) This device may have been added with another device file.
[    27.396] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event18)
[    27.396] (II) No input driver specified, ignoring this device.
[    27.396] (II) This device may have been added with another device file.
[    27.396] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event19)
[    27.396] (II) No input driver specified, ignoring this device.
[    27.396] (II) This device may have been added with another device file.
[    27.396] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event20)
[    27.396] (II) No input driver specified, ignoring this device.
[    27.396] (II) This device may have been added with another device file.
[    27.397] (II) config/udev: Adding input device A4TECH USB Device (/dev/input/event1)
[    27.397] (**) A4TECH USB Device: Applying InputClass "evdev keyboard catchall"
[    27.397] (II) Using input driver 'evdev' for 'A4TECH USB Device'
[    27.397] (**) A4TECH USB Device: always reports core events
[    27.397] (**) evdev: A4TECH USB Device: Device: "/dev/input/event1"
[    27.397] (--) evdev: A4TECH USB Device: Vendor 0x9da Product 0x54f
[    27.397] (--) evdev: A4TECH USB Device: Found 1 mouse buttons
[    27.397] (--) evdev: A4TECH USB Device: Found scroll wheel(s)
[    27.397] (--) evdev: A4TECH USB Device: Found relative axes
[    27.397] (--) evdev: A4TECH USB Device: Found absolute axes
[    27.397] (--) evdev: A4TECH USB Device: Found x and y absolute axes
[    27.397] (--) evdev: A4TECH USB Device: Found keys
[    27.397] (II) evdev: A4TECH USB Device: Configuring as mouse
[    27.397] (II) evdev: A4TECH USB Device: Configuring as keyboard
[    27.397] (II) evdev: A4TECH USB Device: Adding scrollwheel support
[    27.397] (**) evdev: A4TECH USB Device: YAxisMapping: buttons 4 and 5
[    27.397] (**) evdev: A4TECH USB Device: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    27.397] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.0/input/input1/event1"
[    27.397] (II) XINPUT: Adding extended input device "A4TECH USB Device" (type: KEYBOARD, id 10)
[    27.397] (**) Option "xkb_rules" "evdev"
[    27.397] (**) Option "xkb_model" "pc105"
[    27.397] (**) Option "xkb_layout" "pl"
[    27.398] (II) evdev: A4TECH USB Device: initialized for relative axes.
[    27.398] (WW) evdev: A4TECH USB Device: ignoring absolute axes.
[    27.398] (**) A4TECH USB Device: (accel) keeping acceleration scheme 1
[    27.398] (**) A4TECH USB Device: (accel) acceleration profile 0
[    27.398] (**) A4TECH USB Device: (accel) acceleration factor: 2.000
[    27.398] (**) A4TECH USB Device: (accel) acceleration threshold: 4
[    27.398] (II) config/udev: Adding input device A4TECH USB Device (/dev/input/js0)
[    27.398] (II) No input driver specified, ignoring this device.
[    27.398] (II) This device may have been added with another device file.
[    27.399] (II) config/udev: Adding input device A4TECH USB Device (/dev/input/event2)
[    27.399] (**) A4TECH USB Device: Applying InputClass "evdev pointer catchall"
[    27.399] (II) Using input driver 'evdev' for 'A4TECH USB Device'
[    27.399] (**) A4TECH USB Device: always reports core events
[    27.399] (**) evdev: A4TECH USB Device: Device: "/dev/input/event2"
[    27.399] (--) evdev: A4TECH USB Device: Vendor 0x9da Product 0x54f
[    27.399] (--) evdev: A4TECH USB Device: Found 20 mouse buttons
[    27.399] (--) evdev: A4TECH USB Device: Found scroll wheel(s)
[    27.399] (--) evdev: A4TECH USB Device: Found relative axes
[    27.399] (--) evdev: A4TECH USB Device: Found x and y relative axes
[    27.399] (II) evdev: A4TECH USB Device: Configuring as mouse
[    27.399] (II) evdev: A4TECH USB Device: Adding scrollwheel support
[    27.399] (**) evdev: A4TECH USB Device: YAxisMapping: buttons 4 and 5
[    27.399] (**) evdev: A4TECH USB Device: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    27.399] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.1/input/input2/event2"
[    27.399] (II) XINPUT: Adding extended input device "A4TECH USB Device" (type: MOUSE, id 11)
[    27.399] (II) evdev: A4TECH USB Device: initialized for relative axes.
[    27.400] (**) A4TECH USB Device: (accel) keeping acceleration scheme 1
[    27.400] (**) A4TECH USB Device: (accel) acceleration profile 0
[    27.400] (**) A4TECH USB Device: (accel) acceleration factor: 2.000
[    27.400] (**) A4TECH USB Device: (accel) acceleration threshold: 4
[    27.400] (II) config/udev: Adding input device A4TECH USB Device (/dev/input/mouse0)
[    27.400] (II) No input driver specified, ignoring this device.
[    27.400] (II) This device may have been added with another device file.
[    27.400] (II) config/udev: Adding input device Integrated Webcam (/dev/input/event15)
[    27.400] (**) Integrated Webcam: Applying InputClass "evdev keyboard catchall"
[    27.400] (II) Using input driver 'evdev' for 'Integrated Webcam'
[    27.400] (**) Integrated Webcam: always reports core events
[    27.400] (**) evdev: Integrated Webcam: Device: "/dev/input/event15"
[    27.400] (--) evdev: Integrated Webcam: Vendor 0x5ca Product 0x18a0
[    27.401] (--) evdev: Integrated Webcam: Found keys
[    27.401] (II) evdev: Integrated Webcam: Configuring as keyboard
[    27.401] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb4/4-5/4-5:1.0/input/input15/event15"
[    27.401] (II) XINPUT: Adding extended input device "Integrated Webcam" (type: KEYBOARD, id 12)
[    27.401] (**) Option "xkb_rules" "evdev"
[    27.401] (**) Option "xkb_model" "pc105"
[    27.401] (**) Option "xkb_layout" "pl"
[    27.401] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    27.401] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    27.401] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    27.401] (**) AT Translated Set 2 keyboard: always reports core events
[    27.401] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[    27.401] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    27.401] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    27.401] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    27.401] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    27.401] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[    27.401] (**) Option "xkb_rules" "evdev"
[    27.401] (**) Option "xkb_model" "pc105"
[    27.401] (**) Option "xkb_layout" "pl"
[    27.402] (II) config/udev: Adding input device PS/2 Mouse (/dev/input/event12)
[    27.402] (**) PS/2 Mouse: Applying InputClass "evdev pointer catchall"
[    27.402] (II) Using input driver 'evdev' for 'PS/2 Mouse'
[    27.402] (**) PS/2 Mouse: always reports core events
[    27.402] (**) evdev: PS/2 Mouse: Device: "/dev/input/event12"
[    27.402] (--) evdev: PS/2 Mouse: Vendor 0x2 Product 0x8
[    27.402] (--) evdev: PS/2 Mouse: Found 3 mouse buttons
[    27.402] (--) evdev: PS/2 Mouse: Found relative axes
[    27.402] (--) evdev: PS/2 Mouse: Found x and y relative axes
[    27.402] (II) evdev: PS/2 Mouse: Configuring as mouse
[    27.402] (**) evdev: PS/2 Mouse: YAxisMapping: buttons 4 and 5
[    27.402] (**) evdev: PS/2 Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    27.402] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input12/event12"
[    27.402] (II) XINPUT: Adding extended input device "PS/2 Mouse" (type: MOUSE, id 14)
[    27.402] (II) evdev: PS/2 Mouse: initialized for relative axes.
[    27.403] (**) PS/2 Mouse: (accel) keeping acceleration scheme 1
[    27.403] (**) PS/2 Mouse: (accel) acceleration profile 0
[    27.403] (**) PS/2 Mouse: (accel) acceleration factor: 2.000
[    27.403] (**) PS/2 Mouse: (accel) acceleration threshold: 4
[    27.403] (II) config/udev: Adding input device PS/2 Mouse (/dev/input/mouse3)
[    27.403] (II) No input driver specified, ignoring this device.
[    27.403] (II) This device may have been added with another device file.
[    27.403] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/event13)
[    27.403] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "evdev touchpad catchall"
[    27.403] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "touchpad catchall"
[    27.403] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "Default clickpad buttons"
[    27.403] (II) LoadModule: "synaptics"
[    27.404] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    27.429] (II) Module synaptics: vendor="X.Org Foundation"
[    27.429]     compiled for 1.12.4, module version = 1.6.2
[    27.429]     Module class: X.Org XInput Driver
[    27.429]     ABI class: X.Org XInput driver, version 16.0
[    27.429] (II) Using input driver 'synaptics' for 'AlpsPS/2 ALPS GlidePoint'
[    27.429] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
[    27.429] (**) Option "Device" "/dev/input/event13"
[    27.440] (--) synaptics: AlpsPS/2 ALPS GlidePoint: x-axis range 0 - 1023
[    27.440] (--) synaptics: AlpsPS/2 ALPS GlidePoint: y-axis range 0 - 767
[    27.440] (--) synaptics: AlpsPS/2 ALPS GlidePoint: pressure range 0 - 127
[    27.440] (II) synaptics: AlpsPS/2 ALPS GlidePoint: device does not report finger width.
[    27.440] (--) synaptics: AlpsPS/2 ALPS GlidePoint: buttons: left right middle
[    27.440] (--) synaptics: AlpsPS/2 ALPS GlidePoint: Vendor 0x2 Product 0x8
[    27.440] (--) synaptics: AlpsPS/2 ALPS GlidePoint: invalid finger width range.  defaulting to 0 - 15
[    27.440] (--) synaptics: AlpsPS/2 ALPS GlidePoint: touchpad found
[    27.440] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
[    27.444] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input13/event13"
[    27.444] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS GlidePoint" (type: TOUCHPAD, id 15)
[    27.444] (**) synaptics: AlpsPS/2 ALPS GlidePoint: (accel) MinSpeed is now constant deceleration 2.5
[    27.444] (**) synaptics: AlpsPS/2 ALPS GlidePoint: MaxSpeed is now 1.75
[    27.444] (**) synaptics: AlpsPS/2 ALPS GlidePoint: AccelFactor is now 0.156
[    27.444] (**) AlpsPS/2 ALPS GlidePoint: (accel) keeping acceleration scheme 1
[    27.444] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration profile 1
[    27.444] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration factor: 2.000
[    27.444] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration threshold: 4
[    27.444] (--) synaptics: AlpsPS/2 ALPS GlidePoint: touchpad found
[    27.445] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/mouse4)
[    27.445] (**) AlpsPS/2 ALPS GlidePoint: Ignoring device from InputClass "touchpad ignore duplicates"
[    27.446] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[    27.446] (II) No input driver specified, ignoring this device.
[    27.446] (II) This device may have been added with another device file.
[    27.447] (II) config/udev: Adding input device MCE IR Keyboard/Mouse (ite-cir) (/dev/input/event11)
[    27.447] (**) MCE IR Keyboard/Mouse (ite-cir): Applying InputClass "evdev pointer catchall"
[    27.447] (**) MCE IR Keyboard/Mouse (ite-cir): Applying InputClass "evdev keyboard catchall"
[    27.447] (II) Using input driver 'evdev' for 'MCE IR Keyboard/Mouse (ite-cir)'
[    27.447] (**) MCE IR Keyboard/Mouse (ite-cir): always reports core events
[    27.447] (**) evdev: MCE IR Keyboard/Mouse (ite-cir): Device: "/dev/input/event11"
[    27.447] (--) evdev: MCE IR Keyboard/Mouse (ite-cir): Vendor 0 Product 0
[    27.447] (--) evdev: MCE IR Keyboard/Mouse (ite-cir): Found 3 mouse buttons
[    27.447] (--) evdev: MCE IR Keyboard/Mouse (ite-cir): Found relative axes
[    27.447] (--) evdev: MCE IR Keyboard/Mouse (ite-cir): Found x and y relative axes
[    27.447] (--) evdev: MCE IR Keyboard/Mouse (ite-cir): Found keys
[    27.447] (II) evdev: MCE IR Keyboard/Mouse (ite-cir): Configuring as mouse
[    27.447] (II) evdev: MCE IR Keyboard/Mouse (ite-cir): Configuring as keyboard
[    27.447] (**) evdev: MCE IR Keyboard/Mouse (ite-cir): YAxisMapping: buttons 4 and 5
[    27.447] (**) evdev: MCE IR Keyboard/Mouse (ite-cir): EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    27.447] (**) Option "config_info" "udev:/sys/devices/virtual/input/input11/event11"
[    27.447] (II) XINPUT: Adding extended input device "MCE IR Keyboard/Mouse (ite-cir)" (type: KEYBOARD, id 16)
[    27.448] (**) Option "xkb_rules" "evdev"
[    27.448] (**) Option "xkb_model" "pc105"
[    27.448] (**) Option "xkb_layout" "pl"
[    27.448] (II) evdev: MCE IR Keyboard/Mouse (ite-cir): initialized for relative axes.
[    27.448] (**) MCE IR Keyboard/Mouse (ite-cir): (accel) keeping acceleration scheme 1
[    27.448] (**) MCE IR Keyboard/Mouse (ite-cir): (accel) acceleration profile 0
[    27.448] (**) MCE IR Keyboard/Mouse (ite-cir): (accel) acceleration factor: 2.000
[    27.448] (**) MCE IR Keyboard/Mouse (ite-cir): (accel) acceleration threshold: 4
[    27.449] (II) config/udev: Adding input device MCE IR Keyboard/Mouse (ite-cir) (/dev/input/mouse2)
[    27.449] (II) No input driver specified, ignoring this device.
[    27.449] (II) This device may have been added with another device file.
[    27.450] (II) config/udev: Adding input device ACPI Virtual Keyboard Device (/dev/input/event4)
[    27.450] (**) ACPI Virtual Keyboard Device: Applying InputClass "evdev keyboard catchall"
[    27.450] (II) Using input driver 'evdev' for 'ACPI Virtual Keyboard Device'
[    27.450] (**) ACPI Virtual Keyboard Device: always reports core events
[    27.450] (**) evdev: ACPI Virtual Keyboard Device: Device: "/dev/input/event4"
[    27.450] (--) evdev: ACPI Virtual Keyboard Device: Vendor 0 Product 0
[    27.450] (--) evdev: ACPI Virtual Keyboard Device: Found keys
[    27.450] (II) evdev: ACPI Virtual Keyboard Device: Configuring as keyboard
[    27.450] (**) Option "config_info" "udev:/sys/devices/virtual/input/input21/event4"
[    27.450] (II) XINPUT: Adding extended input device "ACPI Virtual Keyboard Device" (type: KEYBOARD, id 17)
[    27.450] (**) Option "xkb_rules" "evdev"
[    27.450] (**) Option "xkb_model" "pc105"
[    27.450] (**) Option "xkb_layout" "pl"
[    27.451] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event6)
[    27.451] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[    27.451] (II) Using input driver 'evdev' for 'Dell WMI hotkeys'
[    27.451] (**) Dell WMI hotkeys: always reports core events
[    27.451] (**) evdev: Dell WMI hotkeys: Device: "/dev/input/event6"
[    27.452] (--) evdev: Dell WMI hotkeys: Vendor 0 Product 0
[    27.452] (--) evdev: Dell WMI hotkeys: Found keys
[    27.452] (II) evdev: Dell WMI hotkeys: Configuring as keyboard
[    27.452] (**) Option "config_info" "udev:/sys/devices/virtual/input/input6/event6"
[    27.452] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 18)
[    27.452] (**) Option "xkb_rules" "evdev"
[    27.452] (**) Option "xkb_model" "pc105"
[    27.452] (**) Option "xkb_layout" "pl"
[    27.453] (II) config/udev: Adding input device ITE8708 CIR transceiver (/dev/input/event10)
[    27.453] (**) ITE8708 CIR transceiver: Applying InputClass "evdev keyboard catchall"
[    27.453] (II) Using input driver 'evdev' for 'ITE8708 CIR transceiver'
[    27.453] (**) ITE8708 CIR transceiver: always reports core events
[    27.453] (**) evdev: ITE8708 CIR transceiver: Device: "/dev/input/event10"
[    27.453] (--) evdev: ITE8708 CIR transceiver: Vendor 0x1283 Product 0
[    27.453] (--) evdev: ITE8708 CIR transceiver: Found keys
[    27.453] (II) evdev: ITE8708 CIR transceiver: Configuring as keyboard
[    27.453] (**) Option "config_info" "udev:/sys/devices/virtual/rc/rc0/input10/event10"
[    27.453] (II) XINPUT: Adding extended input device "ITE8708 CIR transceiver" (type: KEYBOARD, id 19)
[    27.453] (**) Option "xkb_rules" "evdev"
[    27.453] (**) Option "xkb_model" "pc105"
[    27.454] (**) Option "xkb_layout" "pl"
[    27.491] (II) intel(0): EDID vendor "LPL", prod id 0
[    27.491] (II) intel(0):     EDID quirk: Detailed timings give vertical size in cm.
[    27.491] (II) intel(0): Printing DDC gathered Modelines:
[    27.491] (II) intel(0): Modeline "1280x800"x0.0   66.09  1280 1304 1328 1352  800 803 809 816 +hsync -vsync (48.9 kHz eP)
[    32.669] (II) intel(0): EDID vendor "LPL", prod id 0
[    32.669] (II) intel(0):     EDID quirk: Detailed timings give vertical size in cm.
[    32.669] (II) intel(0): Printing DDC gathered Modelines:
[    32.669] (II) intel(0): Modeline "1280x800"x0.0   66.09  1280 1304 1328 1352  800 803 809 816 +hsync -vsync (48.9 kHz eP)
[    82.038] (II) intel(0): EDID vendor "LPL", prod id 0
[    82.038] (II) intel(0):     EDID quirk: Detailed timings give vertical size in cm.
[    82.038] (II) intel(0): Printing DDC gathered Modelines:
[    82.038] (II) intel(0): Modeline "1280x800"x0.0   66.09  1280 1304 1328 1352  800 803 809 816 +hsync -vsync (48.9 kHz eP)
[    82.076] (II) intel(0): EDID vendor "LPL", prod id 0
[    82.076] (II) intel(0):     EDID quirk: Detailed timings give vertical size in cm.
[    82.076] (II) intel(0): Printing DDC gathered Modelines:
[    82.076] (II) intel(0): Modeline "1280x800"x0.0   66.09  1280 1304 1328 1352  800 803 809 816 +hsync -vsync (48.9 kHz eP)
[    83.713] (II) intel(0): EDID vendor "LPL", prod id 0
[    83.713] (II) intel(0):     EDID quirk: Detailed timings give vertical size in cm.
[    83.713] (II) intel(0): Printing DDC gathered Modelines:
[    83.713] (II) intel(0): Modeline "1280x800"x0.0   66.09  1280 1304 1328 1352  800 803 809 816 +hsync -vsync (48.9 kHz eP)
[    83.755] (II) intel(0): EDID vendor "LPL", prod id 0
[    83.755] (II) intel(0):     EDID quirk: Detailed timings give vertical size in cm.
[    83.755] (II) intel(0): Printing DDC gathered Modelines:
[    83.755] (II) intel(0): Modeline "1280x800"x0.0   66.09  1280 1304 1328 1352  800 803 809 816 +hsync -vsync (48.9 kHz eP)
[    83.791] (II) intel(0): EDID vendor "LPL", prod id 0
[    83.791] (II) intel(0):     EDID quirk: Detailed timings give vertical size in cm.
[    83.791] (II) intel(0): Printing DDC gathered Modelines:
[    83.791] (II) intel(0): Modeline "1280x800"x0.0   66.09  1280 1304 1328 1352  800 803 809 816 +hsync -vsync (48.9 kHz eP)

http://ompldr.org/taGU0MQ

z góry dziękuję za każdą pomoc!

//wstawiłem miniaturkę — yossarian

Ostatnio edytowany przez compix (2013-02-07 22:59:08)


' jeden człowiek przed klawiaturą budzi większy respect niż zawodowa armia`

Offline

 

#2  2013-02-08 00:53:04

  yossarian - Szczawiożerca

yossarian
Szczawiożerca
Skąd: Shangri-La
Zarejestrowany: 2011-04-25

Re: Problem z tapetą, i ikonami. Po jakimś czasie stają się niewyraźne.

Zobacz na koncie nowego użytkownika.

Sprawdź tez na nowszym kernelu (np. z aptosida).

Offline

 

#3  2013-02-08 00:55:56

  compix - Użytkownik

compix
Użytkownik
Zarejestrowany: 2012-05-25

Re: Problem z tapetą, i ikonami. Po jakimś czasie stają się niewyraźne.

kernel postaram się zaaktualizować jak najszybciej.

Popracuje w takim razie na innym koncie użytkownika.

Jeśli jeszcze jakieś sugestie to bardzo proszę.

I tak z ciekawości, w jaki sposób może być to wina samego użytkownika?


' jeden człowiek przed klawiaturą budzi większy respect niż zawodowa armia`

Offline

 

#4  2013-02-08 07:55:22

  lukaz1987 - Członek DUG

lukaz1987
Członek DUG
Zarejestrowany: 2008-08-12

Re: Problem z tapetą, i ikonami. Po jakimś czasie stają się niewyraźne.

Czyli na nowym koncie działa poprawnie? A na nowym koncie czasami nie masz w ogóle  wyłączonego compiza? Bo może on powoduje na starym koncie ten błąd.

Ostatnio edytowany przez lukaz1987 (2013-02-08 08:26:16)

Offline

 

#5  2013-02-08 09:11:33

  compix - Użytkownik

compix
Użytkownik
Zarejestrowany: 2012-05-25

Re: Problem z tapetą, i ikonami. Po jakimś czasie stają się niewyraźne.

Na nowym koncie będę testował. Problem pojawia się po jakimś czasie, dlatego muszę po testować dłuższy czas.


' jeden człowiek przed klawiaturą budzi większy respect niż zawodowa armia`

Offline

 

#6  2013-02-08 12:34:43

  compix - Użytkownik

compix
Użytkownik
Zarejestrowany: 2012-05-25

Re: Problem z tapetą, i ikonami. Po jakimś czasie stają się niewyraźne.

Zauważyłem właśnie że dzieje się to przeważnie gdy użycie pamięci ram jest bliski 100% i zaczyna używać przestrzeni wymiany. Czy ma to jakiś związek?


' jeden człowiek przed klawiaturą budzi większy respect niż zawodowa armia`

Offline

 

#7  2013-02-08 12:53:57

  yossarian - Szczawiożerca

yossarian
Szczawiożerca
Skąd: Shangri-La
Zarejestrowany: 2011-04-25

Re: Problem z tapetą, i ikonami. Po jakimś czasie stają się niewyraźne.

Tak z ciekawości, ile masz ramu?
Z jakiego menedżera okien korzystasz?

Offline

 

#8  2013-02-08 12:57:21

  compix - Użytkownik

compix
Użytkownik
Zarejestrowany: 2012-05-25

Re: Problem z tapetą, i ikonami. Po jakimś czasie stają się niewyraźne.

Mam 3GB.

Menadżer okien to Xfwm


' jeden człowiek przed klawiaturą budzi większy respect niż zawodowa armia`

Offline

 

#9  2013-02-08 12:58:50

  lukaz1987 - Członek DUG

lukaz1987
Członek DUG
Zarejestrowany: 2008-08-12

Re: Problem z tapetą, i ikonami. Po jakimś czasie stają się niewyraźne.

A sprawdzałeś w procesach co tak niemiłosiernie pożera RAM?

Offline

 

#10  2013-02-08 13:01:33

  yossarian - Szczawiożerca

yossarian
Szczawiożerca
Skąd: Shangri-La
Zarejestrowany: 2011-04-25

Re: Problem z tapetą, i ikonami. Po jakimś czasie stają się niewyraźne.

Bo to podejrzane, żeby tyle zużywało Xfce.
Odpal htop i zobacz co się tam dzieje.

Offline

 

#11  2013-02-08 13:07:29

  compix - Użytkownik

compix
Użytkownik
Zarejestrowany: 2012-05-25

Re: Problem z tapetą, i ikonami. Po jakimś czasie stają się niewyraźne.

google chrome :)

Aktualnie pracuje na kilkudziesięciu kartach, plus chroiminium by się nie pogubić.

Po wyłączeniu przeglądarki, dysk mieli przez jakiś czas[zapisuje].

Po tym czasie system znacząco zwalnia, restart oczywiście pomaga, albo czasem sam wraca do normalnej pracy. Dlatego też jestem ciekaw jaki ma to związek z użytkownikiem. Jestem w miarę początkujący w systemach GNU/Linux :)

Jeśli trzeba mogę wrzucić screen z htop


' jeden człowiek przed klawiaturą budzi większy respect niż zawodowa armia`

Offline

 

#12  2013-02-08 13:17:57

  yossarian - Szczawiożerca

yossarian
Szczawiożerca
Skąd: Shangri-La
Zarejestrowany: 2011-04-25

Re: Problem z tapetą, i ikonami. Po jakimś czasie stają się niewyraźne.

Mogą być jakieś specyficzne ustawienia użytkownika.
Czasem to jest źródłem problemów.

W tym przypadku możesz sprawdzić na nowym profilu Chrome z domyślnymi ustawieniami.

Offline

 

#13  2013-02-08 13:35:19

  lukaz1987 - Członek DUG

lukaz1987
Członek DUG
Zarejestrowany: 2008-08-12

Re: Problem z tapetą, i ikonami. Po jakimś czasie stają się niewyraźne.

W przeglądarce w polu adresu wpisz 

Kod:

about:memory

i zobacz może jakiś dodatek do przeglądarki pobiera ogromną ilość RAM-u.

Offline

 

#14  2013-02-08 13:43:05

  compix - Użytkownik

compix
Użytkownik
Zarejestrowany: 2012-05-25

Re: Problem z tapetą, i ikonami. Po jakimś czasie stają się niewyraźne.

Ok.

Ten sam skutek może być używając innej przeglądarki przez jakiś czas, dobrze rozumiem?

Może to ma jakiś związek z google chrome, i problemem który nie dawno staraliśmy się rozwiązać

http://forum.dug.net.pl/viewtopic.php?pid=220547#p220547

mimo zmiany przeglądarki i tak siłą rzeczy muszę korzystać z dwóch przeglądarek.

Polecacie może jakieś dobre przeglądarki graficzne, lekkie? Synchronizacja z kontem googla pewnie tylko w chromium jak i google chrome.


lukaz1987 - najwięcej flash i GPU po ponad 300 mb, później same karty otwarte w zależności od strony od 10 mb do ponad stówki


' jeden człowiek przed klawiaturą budzi większy respect niż zawodowa armia`

Offline

 

#15  2013-02-08 13:51:25

  lukaz1987 - Członek DUG

lukaz1987
Członek DUG
Zarejestrowany: 2008-08-12

Re: Problem z tapetą, i ikonami. Po jakimś czasie stają się niewyraźne.

A w ustawieniach masz odznaczoną  opcję:

Kod:

Kontynuuj działanie aplikacji w tle po zamknięciu przeglądarki Google Chrome

Offline

 

#16  2013-02-08 13:53:17

  compix - Użytkownik

compix
Użytkownik
Zarejestrowany: 2012-05-25

Re: Problem z tapetą, i ikonami. Po jakimś czasie stają się niewyraźne.

O! nawet nie zwróciłem uwagi, miałem zaznaczoną opcje

Kod:

Kontynuuj działanie aplikacji w tle po zamknięciu przeglądarki Google Chrome

odznaczyłem i zobaczymy jak się będzie sprawować.


edit 12.02.13

Testowałem to, niestety dziś znów się pojawił problem. Nie wiem jednak czy to nie wina tego iż uruchomiłem film na youtube w google chrome, co było by to co najmniej dziwne ;).

Druga sprawa to taka że system nie działa tak płynnie jak bym tego chciał, mimo wyłączenia przeglądarki.


Nie będę tworzył innego tematu, zarządzanie energią w xfce jest troszkę ubogie, aczkolwiek jest opcja wyłączanie dysku twardych w bezczynności. Jednak chciałbym całkowicie wyłączyć możliwość wyłączania dysku[ ma pracować cały czas]. Bo mimo iż w ustawieniach mam zaznaczone  że mają się nie wyłączać, to od czasu do czasu słyszę jak się rozkręca.

Ostatnio edytowany przez compix (2013-02-12 19:36:21)


' jeden człowiek przed klawiaturą budzi większy respect niż zawodowa armia`

Offline

 

#17  2013-02-19 21:52:10

  compix - Użytkownik

compix
Użytkownik
Zarejestrowany: 2012-05-25

Re: Problem z tapetą, i ikonami. Po jakimś czasie stają się niewyraźne.

Witam,

wygląda na to że problem jest rozwiązany. Około tydzień temu zmieniłem całkowicie przeglądarkę na chromium, i nie korzystam z google chrome. Tapeta jest cała, i wszystko ładnie działa. Nie wiem jaki to miał związek z przeglądarką, ale  nic nie wskazuje na to że problem nadal istnieje.

Wszystkim serdecznie dziękuję!


' jeden człowiek przed klawiaturą budzi większy respect niż zawodowa armia`

Offline

 

#18  2013-02-20 20:41:48

  gindek - Zubr, bydle na etacie.

gindek
Zubr, bydle na etacie.
Skąd: Z puszczy.
Zarejestrowany: 2008-12-08

Re: Problem z tapetą, i ikonami. Po jakimś czasie stają się niewyraźne.

jak by jednak problem powrócił, to sprawdz :
http://www.aptekapodgryfem.pl/sites/default/files/zdj_gl/234_0.JPG
widziałem w reklamie jak pomaga na nie wyraźny obraz.

Jak bym miał zgadywać winnego to powiedział bym że "strzał" Jest w module intela do kernela.


" Wojny przychodzą i odchodzą, a moi żołnierze są wieczni"


"Zbuduj mały, dziarski router z udostępnionych przez prowadzącego części od Kamaza?"

Offline

 

Stopka forum

Powered by PunBB
© Copyright 2002–2005 Rickard Andersson
To nie jest tylko forum, to nasza mała ojczyzna ;-)