Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!

Ogłoszenie

Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.

#1  2013-01-17 19:15:56

  paw4el - Użytkownik

paw4el
Użytkownik
Zarejestrowany: 2010-07-05

Gnome-shell przestał działać

Witam.
Dzisiaj przestał mi działać poprawnie gnome-shell, ładuje się ale wygląda tak:

http://i3.fmix.pl/fmm1312/96649dd1002d63a050f83eb8/zdjecie.jpg

Mam taki błąd:

Kod:

Xlib:  extension "GLX" missing on display ":0.0".

(gnome-shell:4468): Clutter-CRITICAL **: Unable to initialize Clutter: Failed to connected to any renderer: 
XServer appears to lack required GLX support
Błąd menedżera okien: Unable to initialize Clutter.

GNOME Shell 3.4.2

Miał ktoś podobny problem?
Jak go naprawić?

Offline

 

#2  2013-01-17 19:19:39

  yossarian - Szczawiożerca

yossarian
Szczawiożerca
Skąd: Shangri-La
Zarejestrowany: 2011-04-25

Re: Gnome-shell przestał działać

Zapewne nikt nie wie jaką masz kartę graficzną i sterowniki.
Czyż nie?

Offline

 

#3  2013-01-17 19:21:59

  paw4el - Użytkownik

paw4el
Użytkownik
Zarejestrowany: 2010-07-05

Re: Gnome-shell przestał działać

Kod:

00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) (rev 03) (prog-if 00 [VGA controller])
    Subsystem: Acer Incorporated [ALI] Device 011f
    Flags: bus master, fast devsel, latency 0, IRQ 44
    Memory at fc000000 (64-bit, non-prefetchable) [size=1M]
    Memory at d0000000 (64-bit, prefetchable) [size=256M]
    I/O ports at 1800 [size=8]
    Expansion ROM at <unassigned> [disabled]
    Capabilities: <access denied>
    Kernel driver in use: i915

00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (secondary) (rev 03)
    Subsystem: Acer Incorporated [ALI] Device 011f
    Flags: bus master, fast devsel, latency 0
    Memory at fc100000 (64-bit, non-prefetchable) [size=1M]
    Capabilities: <access denied>

oraz

Kod:

dpkg -l | grep xserver-xorg-video-*
ii  xserver-xorg-video-intel               2:2.19.0-6                         i386         X.Org X server -- Intel i8xx, i9xx display driver
ii  xserver-xorg-video-nvidia              304.64-4                           i386         NVIDIA binary Xorg driver

oraz


Kod:

X.Org X Server 1.12.4
Release Date: 2012-08-27
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32-5-amd64 i686 Debian
Current Operating System: Linux debian 3.2.0-4-686-pae #1 SMP Debian 3.2.35-2 i686
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-686-pae root=UUID=6d3bbcda-a5de-4f7f-94b3-f91c8bb0ef3f ro quiet
Build Date: 29 November 2012  08:52:43PM
xorg-server 2:1.12.4-4 (Julien Cristau <jcristau@debian.org>) 
Current version of pixman: 0.26.0
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Jan 17 19:56:10 2013
List of video drivers:
    intel
    nvidia
ERROR: could not insert 'nvidia': No such device
(++) Using config file: "/root/xorg.conf.new"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"


Xorg detected your mouse at device /dev/input/mice.
Please check your config if the mouse is still not
operational, as by default Xorg tries to autodetect
the protocol.

Your xorg.conf file is /root/xorg.conf.new

To test the server, run 'X -config /root/xorg.conf.new'

Server terminated with error (2). Closing log file.

Ostatnio edytowany przez paw4el (2013-01-17 19:59:12)

Offline

 

#4  2013-01-17 20:17:12

  yossarian - Szczawiożerca

yossarian
Szczawiożerca
Skąd: Shangri-La
Zarejestrowany: 2011-04-25

Re: Gnome-shell przestał działać

Skąd tam wpisy dotyczące nvidii skoro masz intela?

Instalowałeś jakieś sterowniki?
Masz plik /etc/X11/xorg.conf?

Offline

 

#5  2013-01-17 21:27:09

  paw4el - Użytkownik

paw4el
Użytkownik
Zarejestrowany: 2010-07-05

Re: Gnome-shell przestał działać

Odinstalowałem

Kod:

xserver-xorg-video-nvidia

i po restarcie wszystko wróciło do normy z tym że system coś strasznie wolno działa.
Np. klikam na ikonę jakiegoś programu i muszę poczekać dłuższa chwilę aż się uruchomi (o ile się uruchomi).

Offline

 

#6  2013-01-17 21:38:49

  yossarian - Szczawiożerca

yossarian
Szczawiożerca
Skąd: Shangri-La
Zarejestrowany: 2011-04-25

Re: Gnome-shell przestał działać

Pokaż zawartość /var/log/Xorg.0.log
i wynik:

Kod:

glxinfo |egrep 'direct|Open'

Offline

 

#7  2013-01-21 21:09:12

  paw4el - Użytkownik

paw4el
Użytkownik
Zarejestrowany: 2010-07-05

Re: Gnome-shell przestał działać

glxinfo |egrep 'direct|Open'

Kod:

Xlib:  extension "NV-GLX" missing on display ":0".
direct rendering: No (If you want to find out why, try setting LIBGL_DEBUG=verbose)
OpenGL vendor string: Tungsten Graphics, Inc
OpenGL renderer string: Mesa DRI Intel(R) 965GM x86/MMX/SSE2
OpenGL version string: 1.4 (2.1 Mesa 8.0.5)
OpenGL extensions:

/var/log/Xorg.0.log

Kod:

[    26.093] 
X.Org X Server 1.12.4
Release Date: 2012-08-27
[    26.094] X Protocol Version 11, Revision 0
[    26.094] Build Operating System: Linux 2.6.32-5-amd64 i686 Debian
[    26.094] Current Operating System: Linux debian 3.2.0-4-686-pae #1 SMP Debian 3.2.35-2 i686
[    26.094] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-686-pae root=UUID=6d3bbcda-a5de-4f7f-94b3-f91c8bb0ef3f ro quiet
[    26.094] Build Date: 29 November 2012  08:52:43PM
[    26.094] xorg-server 2:1.12.4-4 (Julien Cristau <jcristau@debian.org>) 
[    26.094] Current version of pixman: 0.26.0
[    26.094]     Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[    26.094] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    26.094] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jan 17 20:17:05 2013
[    26.184] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    26.257] (==) No Layout section.  Using the first Screen section.
[    26.257] (==) No screen section available. Using defaults.
[    26.257] (**) |-->Screen "Default Screen Section" (0)
[    26.257] (**) |   |-->Monitor "<default monitor>"
[    26.285] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
[    26.285] (==) Automatically adding devices
[    26.285] (==) Automatically enabling devices
[    26.363] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    26.363]     Entry deleted from font path.
[    26.363] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    26.363]     Entry deleted from font path.
[    26.363] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    26.363]     Entry deleted from font path.
[    26.449] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    26.449]     Entry deleted from font path.
[    26.449] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    26.449]     Entry deleted from font path.
[    26.449] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[    26.449]     Entry deleted from font path.
[    26.449] (==) FontPath set to:
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/Type1,
    built-ins
[    26.449] (==) ModulePath set to "/usr/lib/xorg/modules"
[    26.449] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
[    26.449] (II) Loader magic: 0xb77a35a0
[    26.449] (II) Module ABI versions:
[    26.449]     X.Org ANSI C Emulation: 0.4
[    26.449]     X.Org Video Driver: 12.1
[    26.449]     X.Org XInput driver : 16.0
[    26.449]     X.Org Server Extension : 6.0
[    26.450] (--) PCI:*(0:0:2:0) 8086:2a02:1025:011f rev 3, Mem @ 0xfc000000/1048576, 0xd0000000/268435456, I/O @ 0x00001800/8
[    26.450] (--) PCI: (0:0:2:1) 8086:2a03:1025:011f rev 3, Mem @ 0xfc100000/1048576
[    26.450] (II) Open ACPI successful (/var/run/acpid.socket)
[    26.450] (II) LoadModule: "extmod"
[    26.578] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    26.634] (II) Module extmod: vendor="X.Org Foundation"
[    26.634]     compiled for 1.12.4, module version = 1.0.0
[    26.634]     Module class: X.Org Server Extension
[    26.634]     ABI class: X.Org Server Extension, version 6.0
[    26.634] (II) Loading extension SELinux
[    26.634] (II) Loading extension MIT-SCREEN-SAVER
[    26.634] (II) Loading extension XFree86-VidModeExtension
[    26.634] (II) Loading extension XFree86-DGA
[    26.634] (II) Loading extension DPMS
[    26.634] (II) Loading extension XVideo
[    26.634] (II) Loading extension XVideo-MotionCompensation
[    26.634] (II) Loading extension X-Resource
[    26.634] (II) LoadModule: "dbe"
[    26.634] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    26.678] (II) Module dbe: vendor="X.Org Foundation"
[    26.678]     compiled for 1.12.4, module version = 1.0.0
[    26.678]     Module class: X.Org Server Extension
[    26.678]     ABI class: X.Org Server Extension, version 6.0
[    26.678] (II) Loading extension DOUBLE-BUFFER
[    26.678] (II) LoadModule: "glx"
[    26.678] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    26.790] (II) Module glx: vendor="X.Org Foundation"
[    26.790]     compiled for 1.12.4, module version = 1.0.0
[    26.790]     ABI class: X.Org Server Extension, version 6.0
[    26.791] (==) AIGLX enabled
[    26.806] (II) Loading extension GLX
[    26.806] (II) LoadModule: "record"
[    26.806] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    26.890] (II) Module record: vendor="X.Org Foundation"
[    26.890]     compiled for 1.12.4, module version = 1.13.0
[    26.890]     Module class: X.Org Server Extension
[    26.890]     ABI class: X.Org Server Extension, version 6.0
[    26.890] (II) Loading extension RECORD
[    26.890] (II) LoadModule: "dri"
[    26.890] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    26.976] (II) Module dri: vendor="X.Org Foundation"
[    26.976]     compiled for 1.12.4, module version = 1.0.0
[    26.976]     ABI class: X.Org Server Extension, version 6.0
[    26.976] (II) Loading extension XFree86-DRI
[    26.976] (II) LoadModule: "dri2"
[    26.976] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    27.031] (II) Module dri2: vendor="X.Org Foundation"
[    27.031]     compiled for 1.12.4, module version = 1.2.0
[    27.031]     ABI class: X.Org Server Extension, version 6.0
[    27.031] (II) Loading extension DRI2
[    27.031] (==) Matched intel as autoconfigured driver 0
[    27.031] (==) Matched vesa as autoconfigured driver 1
[    27.031] (==) Matched fbdev as autoconfigured driver 2
[    27.031] (==) Assigned the driver to the xf86ConfigLayout
[    27.031] (II) LoadModule: "intel"
[    27.053] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    27.304] (II) Module intel: vendor="X.Org Foundation"
[    27.304]     compiled for 1.12.3.902, module version = 2.19.0
[    27.304]     Module class: X.Org Video Driver
[    27.304]     ABI class: X.Org Video Driver, version 12.1
[    27.304] (II) LoadModule: "vesa"
[    27.305] (WW) Warning, couldn't open module vesa
[    27.305] (II) UnloadModule: "vesa"
[    27.305] (II) Unloading vesa
[    27.305] (EE) Failed to load module "vesa" (module does not exist, 0)
[    27.305] (II) LoadModule: "fbdev"
[    27.305] (WW) Warning, couldn't open module fbdev
[    27.305] (II) UnloadModule: "fbdev"
[    27.305] (II) Unloading fbdev
[    27.305] (EE) Failed to load module "fbdev" (module does not exist, 0)
[    27.305] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
    965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
    4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
    Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
    Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
    Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
    Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
    Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
    Ivybridge Server (GT2)
[    27.306] (++) using VT number 7

[    27.313] drmOpenDevice: node name is /dev/dri/card0
[    27.313] drmOpenDevice: open result is 9, (OK)
[    27.313] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[    27.313] drmOpenDevice: node name is /dev/dri/card0
[    27.313] drmOpenDevice: open result is 9, (OK)
[    27.313] drmOpenByBusid: drmOpenMinor returns 9
[    27.313] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[    27.313] (II) intel(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
[    27.313] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    27.313] (==) intel(0): RGB weight 888
[    27.313] (==) intel(0): Default visual is TrueColor
[    27.313] (II) intel(0): Integrated Graphics Chipset: Intel(R) 965GM
[    27.313] (--) intel(0): Chipset: "965GM"
[    27.313] (**) intel(0): Relaxed fencing enabled
[    27.313] (**) intel(0): Wait on SwapBuffers? enabled
[    27.313] (**) intel(0): Triple buffering? enabled
[    27.313] (**) intel(0): Framebuffer tiled
[    27.313] (**) intel(0): Pixmaps tiled
[    27.313] (**) intel(0): 3D buffers tiled
[    27.327] (**) intel(0): SwapBuffers wait enabled
[    27.327] (==) intel(0): video overlay key set to 0x101fe
[    27.328] (II) intel(0): Output LVDS1 has no monitor section
[    27.330] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[    27.352] (II) intel(0): Output VGA1 has no monitor section
[    27.648] (II) intel(0): Output TV1 has no monitor section
[    27.648] (II) intel(0): EDID for output LVDS1
[    27.648] (II) intel(0): Manufacturer: AUO  Model: 2174  Serial#: 0
[    27.648] (II) intel(0): Year: 2005  Week: 1
[    27.648] (II) intel(0): EDID Version: 1.3
[    27.648] (II) intel(0): Digital Display Input
[    27.648] (II) intel(0): Max Image Size [cm]: horiz.: 33  vert.: 21
[    27.648] (II) intel(0): Gamma: 2.20
[    27.649] (II) intel(0): No DPMS capabilities specified
[    27.649] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    27.649] (II) intel(0): First detailed timing is preferred mode
[    27.649] (II) intel(0): redX: 0.590 redY: 0.345   greenX: 0.315 greenY: 0.555
[    27.649] (II) intel(0): blueX: 0.155 blueY: 0.155   whiteX: 0.313 whiteY: 0.329
[    27.649] (II) intel(0): Manufacturer's mask: 0
[    27.649] (II) intel(0): Supported detailed timing:
[    27.649] (II) intel(0): clock: 71.1 MHz   Image Size:  331 x 207 mm
[    27.649] (II) intel(0): h_active: 1280  h_sync: 1328  h_sync_end 1360 h_blank_end 1440 h_border: 0
[    27.649] (II) intel(0): v_active: 800  v_sync: 803  v_sync_end 809 v_blanking: 823 v_border: 0
[    27.649] (II) intel(0): Unknown vendor-specific block f
[    27.649] (II) intel(0):  AUO
[    27.649] (II) intel(0):  B154EW02 V1
[    27.649] (II) intel(0): EDID (in hex):
[    27.649] (II) intel(0):     00ffffffffffff0006af742100000000
[    27.649] (II) intel(0):     010f0103802115780a1cf59758508e27
[    27.649] (II) intel(0):     27505400000001010101010101010101
[    27.649] (II) intel(0):     010101010101c71b00a0502017303020
[    27.649] (II) intel(0):     36004bcf100000180000000f00000000
[    27.649] (II) intel(0):     00000000000000000020000000fe0041
[    27.649] (II) intel(0):     554f0a202020202020202020000000fe
[    27.649] (II) intel(0):     004231353445573032205631200a00aa
[    27.649] (II) intel(0): EDID vendor "AUO", prod id 8564
[    27.649] (II) intel(0): Printing DDC gathered Modelines:
[    27.649] (II) intel(0): Modeline "1280x800"x0.0   71.11  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (49.4 kHz eP)
[    27.877] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[    27.877] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    27.877] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    27.877] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[    27.877] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[    27.877] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[    27.877] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[    27.877] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[    27.877] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[    27.877] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[    27.877] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[    27.877] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[    27.877] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[    27.877] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[    27.877] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[    27.877] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[    27.877] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[    27.877] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[    27.877] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[    27.877] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[    27.877] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[    27.877] (II) intel(0): Printing probed modes for output LVDS1
[    27.877] (II) intel(0): Modeline "1280x800"x60.0   71.11  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (49.4 kHz eP)
[    27.877] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[    27.877] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[    27.877] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[    27.877] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[    27.900] (II) intel(0): EDID for output VGA1
[    28.188] (II) intel(0): EDID for output TV1
[    28.188] (II) intel(0): Output LVDS1 connected
[    28.188] (II) intel(0): Output VGA1 disconnected
[    28.188] (II) intel(0): Output TV1 disconnected
[    28.188] (II) intel(0): Using exact sizes for initial modes
[    28.188] (II) intel(0): Output LVDS1 using initial mode 1280x800
[    28.188] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    28.188] (II) intel(0): Kernel page flipping support detected, enabling
[    28.188] (**) intel(0): Display dimensions: (330, 210) mm
[    28.188] (**) intel(0): DPI set to (98, 96)
[    28.189] (II) Loading sub module "fb"
[    28.189] (II) LoadModule: "fb"
[    28.189] (II) Loading /usr/lib/xorg/modules/libfb.so
[    28.329] (II) Module fb: vendor="X.Org Foundation"
[    28.329]     compiled for 1.12.4, module version = 1.0.0
[    28.329]     ABI class: X.Org ANSI C Emulation, version 0.4
[    28.329] (II) Loading sub module "dri2"
[    28.329] (II) LoadModule: "dri2"
[    28.329] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    28.329] (II) Module dri2: vendor="X.Org Foundation"
[    28.329]     compiled for 1.12.4, module version = 1.2.0
[    28.329]     ABI class: X.Org Server Extension, version 6.0
[    28.329] (==) Depth 24 pixmap format is 32 bpp
[    28.329] (II) intel(0): [DRI2] Setup complete
[    28.329] (II) intel(0): [DRI2]   DRI driver: i965
[    28.329] (II) intel(0): Allocated new frame buffer 1280x800 stride 5120, tiled
[    28.379] (II) UXA(0): Driver registered support for the following operations:
[    28.379] (II)         solid
[    28.379] (II)         copy
[    28.379] (II)         composite (RENDER acceleration)
[    28.380] (II)         put_image
[    28.380] (II)         get_image
[    28.380] (==) intel(0): Backing store disabled
[    28.380] (==) intel(0): Silken mouse enabled
[    28.380] (II) intel(0): Initializing HW Cursor
[    28.380] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    28.390] (==) intel(0): DPMS enabled
[    28.390] (==) intel(0): Intel XvMC decoder enabled
[    28.390] (II) intel(0): Set up textured video
[    28.390] (II) intel(0): Set up overlay video
[    28.390] (II) intel(0): [XvMC] i965_xvmc driver initialized.
[    28.390] (II) intel(0): direct rendering: DRI2 Enabled
[    28.390] (==) intel(0): hotplug detection: "enabled"
[    28.407] (--) RandR disabled
[    28.407] (II) Initializing built-in extension Generic Event Extension
[    28.407] (II) Initializing built-in extension SHAPE
[    28.407] (II) Initializing built-in extension MIT-SHM
[    28.407] (II) Initializing built-in extension XInputExtension
[    28.407] (II) Initializing built-in extension XTEST
[    28.407] (II) Initializing built-in extension BIG-REQUESTS
[    28.407] (II) Initializing built-in extension SYNC
[    28.407] (II) Initializing built-in extension XKEYBOARD
[    28.407] (II) Initializing built-in extension XC-MISC
[    28.407] (II) Initializing built-in extension SECURITY
[    28.407] (II) Initializing built-in extension XINERAMA
[    28.407] (II) Initializing built-in extension XFIXES
[    28.407] (II) Initializing built-in extension RENDER
[    28.407] (II) Initializing built-in extension RANDR
[    28.407] (II) Initializing built-in extension COMPOSITE
[    28.407] (II) Initializing built-in extension DAMAGE
[    28.407] (II) SELinux: Disabled on system
[    29.077] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    29.077] (II) AIGLX: enabled GLX_INTEL_swap_event
[    29.077] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    29.077] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    29.077] (II) AIGLX: Loaded and initialized i965
[    29.077] (II) GLX: Initialized DRI2 GL provider for screen 0
[    29.078] (II) intel(0): Setting screen physical size to 338 x 211
[    30.557] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    30.557] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    30.557] (II) LoadModule: "evdev"
[    30.557] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    30.618] (II) Module evdev: vendor="X.Org Foundation"
[    30.618]     compiled for 1.12.1, module version = 2.7.0
[    30.618]     Module class: X.Org XInput Driver
[    30.618]     ABI class: X.Org XInput driver, version 16.0
[    30.618] (II) Using input driver 'evdev' for 'Power Button'
[    30.618] (**) Power Button: always reports core events
[    30.618] (**) evdev: Power Button: Device: "/dev/input/event3"
[    30.618] (--) evdev: Power Button: Vendor 0 Product 0x1
[    30.618] (--) evdev: Power Button: Found keys
[    30.618] (II) evdev: Power Button: Configuring as keyboard
[    30.618] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[    30.618] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    30.618] (**) Option "xkb_rules" "evdev"
[    30.618] (**) Option "xkb_model" "pc105"
[    30.618] (**) Option "xkb_layout" "pl"
[    31.014] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[    31.014] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    31.014] (II) Using input driver 'evdev' for 'Video Bus'
[    31.014] (**) Video Bus: always reports core events
[    31.014] (**) evdev: Video Bus: Device: "/dev/input/event8"
[    31.014] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    31.014] (--) evdev: Video Bus: Found keys
[    31.014] (II) evdev: Video Bus: Configuring as keyboard
[    31.014] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input8/event8"
[    31.014] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    31.014] (**) Option "xkb_rules" "evdev"
[    31.014] (**) Option "xkb_model" "pc105"
[    31.014] (**) Option "xkb_layout" "pl"
[    31.015] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[    31.015] (II) No input driver specified, ignoring this device.
[    31.015] (II) This device may have been added with another device file.
[    31.015] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[    31.015] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    31.015] (II) Using input driver 'evdev' for 'Sleep Button'
[    31.015] (**) Sleep Button: always reports core events
[    31.015] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[    31.015] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[    31.015] (--) evdev: Sleep Button: Found keys
[    31.015] (II) evdev: Sleep Button: Configuring as keyboard
[    31.015] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2"
[    31.016] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[    31.016] (**) Option "xkb_rules" "evdev"
[    31.016] (**) Option "xkb_model" "pc105"
[    31.016] (**) Option "xkb_layout" "pl"
[    31.016] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event5)
[    31.016] (II) No input driver specified, ignoring this device.
[    31.016] (II) This device may have been added with another device file.
[    31.017] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event6)
[    31.017] (II) No input driver specified, ignoring this device.
[    31.017] (II) This device may have been added with another device file.
[    31.017] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    31.017] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    31.017] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    31.017] (**) AT Translated Set 2 keyboard: always reports core events
[    31.017] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[    31.017] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    31.017] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    31.017] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    31.017] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    31.017] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[    31.017] (**) Option "xkb_rules" "evdev"
[    31.017] (**) Option "xkb_model" "pc105"
[    31.017] (**) Option "xkb_layout" "pl"
[    31.018] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event7)
[    31.018] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[    31.018] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[    31.018] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[    31.018] (II) LoadModule: "synaptics"
[    31.018] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    31.106] (II) Module synaptics: vendor="X.Org Foundation"
[    31.106]     compiled for 1.12.4, module version = 1.6.2
[    31.106]     Module class: X.Org XInput Driver
[    31.106]     ABI class: X.Org XInput driver, version 16.0
[    31.106] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[    31.106] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    31.106] (**) Option "Device" "/dev/input/event7"
[    31.106] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
[    31.106] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
[    31.106] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[    31.106] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[    31.106] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple scroll-buttons
[    31.106] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[    31.106] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    31.106] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    31.106] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio2/input/input7/event7"
[    31.106] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 10)
[    31.106] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[    31.106] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[    31.106] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.040
[    31.106] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[    31.106] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[    31.106] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    31.106] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    31.106] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    31.107] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[    31.107] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[    31.107] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[    31.107] (II) No input driver specified, ignoring this device.
[    31.107] (II) This device may have been added with another device file.
[    31.187] (II) intel(0): EDID vendor "AUO", prod id 8564
[    31.187] (II) intel(0): Printing DDC gathered Modelines:
[    31.187] (II) intel(0): Modeline "1280x800"x0.0   71.11  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (49.4 kHz eP)
[    39.957] (II) intel(0): EDID vendor "AUO", prod id 8564
[    39.957] (II) intel(0): Printing DDC gathered Modelines:
[    39.957] (II) intel(0): Modeline "1280x800"x0.0   71.11  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (49.4 kHz eP)
[    68.521] (II) intel(0): EDID vendor "AUO", prod id 8564
[    68.521] (II) intel(0): Printing DDC gathered Modelines:
[    68.521] (II) intel(0): Modeline "1280x800"x0.0   71.11  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (49.4 kHz eP)
[    70.378] (II) intel(0): EDID vendor "AUO", prod id 8564
[    70.378] (II) intel(0): Printing DDC gathered Modelines:
[    70.378] (II) intel(0): Modeline "1280x800"x0.0   71.11  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (49.4 kHz eP)
[    73.505] (II) intel(0): EDID vendor "AUO", prod id 8564
[    73.505] (II) intel(0): Printing DDC gathered Modelines:
[    73.505] (II) intel(0): Modeline "1280x800"x0.0   71.11  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (49.4 kHz eP)
[   258.112] (II) AIGLX: Suspending AIGLX clients for VT switch
[   403.039] (II) Open ACPI successful (/var/run/acpid.socket)
[   403.039] (II) AIGLX: Resuming AIGLX clients after VT switch
[   403.052] (II) intel(0): EDID vendor "AUO", prod id 8564
[   403.052] (II) intel(0): Printing DDC gathered Modelines:
[   403.052] (II) intel(0): Modeline "1280x800"x0.0   71.11  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (49.4 kHz eP)
[   403.358] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[  1010.466] (II) intel(0): EDID vendor "AUO", prod id 8564
[  1010.466] (II) intel(0): Printing DDC gathered Modelines:
[  1010.466] (II) intel(0): Modeline "1280x800"x0.0   71.11  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (49.4 kHz eP)
[  1012.543] (II) AIGLX: Suspending AIGLX clients for VT switch
[  1015.233] (II) Open ACPI successful (/var/run/acpid.socket)
[  1015.597] (II) AIGLX: Resuming AIGLX clients after VT switch
[  1015.604] (II) intel(0): EDID vendor "AUO", prod id 8564
[  1015.604] (II) intel(0): Printing DDC gathered Modelines:
[  1015.604] (II) intel(0): Modeline "1280x800"x0.0   71.11  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (49.4 kHz eP)
[  1017.139] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found

Offline

 

#8  2013-01-21 21:42:12

  yossarian - Szczawiożerca

yossarian
Szczawiożerca
Skąd: Shangri-La
Zarejestrowany: 2011-04-25

Re: Gnome-shell przestał działać

Spróbuj przeinstalować libgl1-mesa-glx i xserver-xorg-video-intel.

Offline

 

#9  2013-01-21 22:04:36

  paw4el - Użytkownik

paw4el
Użytkownik
Zarejestrowany: 2010-07-05

Re: Gnome-shell przestał działać

Niestety nie pomogło.

Offline

 

#10  2013-01-21 22:08:05

  ArnVaker - Kapelusznik

ArnVaker
Kapelusznik
Skąd: Midgard
Zarejestrowany: 2009-05-06

Re: Gnome-shell przestał działać

Kod:

rm /etc/X11/xorg.conf
aptitude install libgl1-mesa-dri

Restart i jeśli będzie to samo to na nowym użytkowniku sprawdź.

Offline

 

#11  2013-01-21 22:38:59

  paw4el - Użytkownik

paw4el
Użytkownik
Zarejestrowany: 2010-07-05

Re: Gnome-shell przestał działać

Nie mam takiego pliku:

Kod:

root@debian:/etc/X11# find / -type f -name xorg.conf
root@debian:/etc/X11# find / -type f -name xorg.conf.new
/root/xorg.conf.new

Kod:

root@debian:/etc/X11$ ls -la /etc/X11/
razem 2072
drwxr-xr-x   9 root root    4096 cze 27  2012 ./
drwxr-xr-x 148 root root   12288 sty 21 21:45 ../
drwxr-xr-x   2 root root    4096 gru  5 22:29 app-defaults/
-rw-r--r--   1 root root      15 maj  8  2012 default-display-manager
drwxr-xr-x   4 root root    4096 maj  9  2012 fonts/
-rw-r--r--   1 root root   17394 wrz 29  2009 rgb.txt
-rwxr-xr-x   1 root root 2027892 lis 29 21:58 X*
drwxr-xr-x   2 root root    4096 cze 17  2012 xinit/
drwxr-xr-x   2 root root    4096 lis 23  2010 xkb/
-rwxr-xr-x   1 root root     709 paź 13  2010 Xreset*
drwxr-xr-x   2 root root    4096 cze 27  2012 Xreset.d/
drwxr-xr-x   2 root root    4096 cze 27  2012 Xresources/
-rwxr-xr-x   1 root root    3517 kwi  8  2009 Xsession*
drwxr-xr-x   2 root root    4096 paź  1 18:31 Xsession.d/
-rw-r--r--   1 root root     265 sty 16  2009 Xsession.options
-rw-r--r--   1 root root      13 kwi 25  2012 XvMCConfig
-rw-r--r--   1 root root     601 maj  8  2012 Xwrapper.config

Kod:

libgl1-mesa-dri jest już w najnowszej wersji.

Ostatnio edytowany przez paw4el (2013-01-21 22:42:43)

Offline

 

#12  2013-01-21 22:46:26

  ArnVaker - Kapelusznik

ArnVaker
Kapelusznik
Skąd: Midgard
Zarejestrowany: 2009-05-06

Re: Gnome-shell przestał działać

I dobrze, tak powinno być. Na nowym użytkowniku to samo?

Offline

 

#13  2013-01-21 23:12:29

  paw4el - Użytkownik

paw4el
Użytkownik
Zarejestrowany: 2010-07-05

Re: Gnome-shell przestał działać

Dodałem nowego użytkownika - jest to samo.
Po kliknięciu w lewy górny róg nie mogę przywołać aplikacji przez kliknięcie.

Offline

 

#14  2013-01-21 23:18:50

  yossarian - Szczawiożerca

yossarian
Szczawiożerca
Skąd: Shangri-La
Zarejestrowany: 2011-04-25

Re: Gnome-shell przestał działać

Może tu coś ciekawego będzie:

Kod:

LIBGL_DEBUG=verbose glxinfo

Offline

 

Stopka forum

Powered by PunBB
© Copyright 2002–2005 Rickard Andersson
Nas ludzie lubią po prostu, a nie klikając w przyciski ;-)