Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!
Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.
Debian Squeeze nie widzi cd-romu i włożonej karty pamięci. :(
draculla:/home/michal# dmesg [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-5-686 (Debian 2.6.32-38) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Mon Oct 3 04:15:24 UTC 2011 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003f680000 (usable) [ 0.000000] BIOS-e820: 000000003f680000 - 000000003f700000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003f700000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] DMI present. [ 0.000000] last_pfn = 0x3f680 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-DFFFF uncachable [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FC0000000 write-back [ 0.000000] 1 base 03F700000 mask FFFF00000 uncachable [ 0.000000] 2 base 03F800000 mask FFF800000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] PAT not supported by CPU. [ 0.000000] initial memory mapped : 0 - 01800000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000373fe000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037000000 page 2M [ 0.000000] 0037000000 - 00373fe000 page 4k [ 0.000000] kernel direct mapping tables up to 373fe000 @ 7000-d000 [ 0.000000] RAMDISK: 377ad000 - 37fefd9a [ 0.000000] Allocated new RAMDISK: 00100000 - 00942d9a [ 0.000000] Move RAMDISK from 00000000377ad000 - 0000000037fefd99 to 00100000 - 00942d99 [ 0.000000] ACPI: RSDP 000f6290 00014 (v00 ACRSYS) [ 0.000000] ACPI: RSDT 3f6865cb 00058 (v01 ACRSYS ACRPRDCT 06040000 LTP 00000000) [ 0.000000] ACPI: FACP 3f68dc84 00074 (v01 Acer Grape 06040000 LOHR 0000005A) [ 0.000000] ACPI: DSDT 3f687ef1 05D93 (v01 Acer CALISTGA 06040000 INTL 20050228) [ 0.000000] ACPI: FACS 3f68efc0 00040 [ 0.000000] ACPI: APIC 3f68dcf8 00068 (v01 Acer Grape 06040000 LOHR 0000005A) [ 0.000000] ACPI: HPET 3f68dd60 00038 (v01 Acer Grape 06040000 LOHR 0000005A) [ 0.000000] ACPI: MCFG 3f68dd98 0003C (v01 Acer Grape 06040000 LOHR 0000005A) [ 0.000000] ACPI: SLIC 3f68ddd4 00176 (v01 ACRSYS ACRPRDCT 06040000 LOHR 00000000) [ 0.000000] ACPI: DBGP 3f68df4a 00034 (v01 Acer Grape 06040000 LOHR 00000000) [ 0.000000] ACPI: APIC 3f68df7e 0005A (v01 PTLTD ? APIC 06040000 LTP 00000000) [ 0.000000] ACPI: BOOT 3f68dfd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) [ 0.000000] ACPI: SSDT 3f6878a2 0064F (v01 SataRe SataPri 00001000 INTL 20050228) [ 0.000000] ACPI: SSDT 3f687210 00692 (v01 SataRe SataSec 00001000 INTL 20050228) [ 0.000000] ACPI: SSDT 3f686d4e 004C2 (v01 PmRef Cpu0Cst 00003001 INTL 20050228) [ 0.000000] ACPI: SSDT 3f686aef 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050228) [ 0.000000] ACPI: SSDT 3f686623 004CC (v01 PmRef CpuPm 00003000 INTL 20050228) [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0 [ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 130MB HIGHMEM available. [ 0.000000] 883MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 373fe000 [ 0.000000] low ram: 0 - 373fe000 [ 0.000000] node 0 low ram: 00000000 - 373fe000 [ 0.000000] node 0 bootmap 00009000 - 0000fe80 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0001000000 - 00014cccf4] TEXT DATA BSS ==> [0001000000 - 00014cccf4] [ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] [ 0.000000] #5 [00014cd000 - 00014d30d5] BRK ==> [00014cd000 - 00014d30d5] [ 0.000000] #6 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000] [ 0.000000] #7 [0000100000 - 0000942d9a] NEW RAMDISK ==> [0000100000 - 0000942d9a] [ 0.000000] #8 [0000009000 - 0000010000] BOOTMAP ==> [0000009000 - 0000010000] [ 0.000000] found SMP MP-table at [c00f6340] f6340 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000373fe [ 0.000000] HighMem 0x000373fe -> 0x0003f680 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0003f680 [ 0.000000] On node 0 totalpages: 259615 [ 0.000000] free_area_init_node: node 0, pgdat c13b4860, node_mem_map c14d5000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3967 pages, LIFO batch:0 [ 0.000000] Normal zone: 1736 pages used for memmap [ 0.000000] Normal zone: 220470 pages, LIFO batch:31 [ 0.000000] HighMem zone: 262 pages used for memmap [ 0.000000] HighMem zone: 33148 pages, LIFO batch:7 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c2000000 s34328 r0 d23016 u2097152 [ 0.000000] pcpu-alloc: s34328 r0 d23016 u2097152 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257585 [ 0.000000] Kernel command line: root=UUID=329983d6-c5fa-4545-95e4-d69f435f2a10 ro quiet [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (000373fe:0003f680) [ 0.000000] Memory: 1015472k/1038848k available (2504k kernel code, 22496k reserved, 1328k data, 380k init, 133640k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB) [ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB) [ 0.000000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB) [ 0.000000] .init : 0xc13bf000 - 0xc141e000 ( 380 kB) [ 0.000000] .data : 0xc12721f1 - 0xc13be480 (1328 kB) [ 0.000000] .text : 0xc1000000 - 0xc12721f1 (2504 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:1280 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1861.883 MHz processor. [ 0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 3723.76 BogoMIPS (lpj=7447532) [ 0.004026] Security Framework initialized [ 0.004033] SELinux: Disabled at boot. [ 0.004041] Mount-cache hash table entries: 512 [ 0.004188] Initializing cgroup subsys ns [ 0.004193] Initializing cgroup subsys cpuacct [ 0.004197] Initializing cgroup subsys devices [ 0.004199] Initializing cgroup subsys freezer [ 0.004202] Initializing cgroup subsys net_cls [ 0.004228] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004231] CPU: L2 cache: 1024K [ 0.004236] mce: CPU supports 6 MCE banks [ 0.004248] CPU0: Thermal monitoring enabled (TM1) [ 0.004251] using mwait in idle threads. [ 0.004259] Performance Events: no PMU driver, software events only. [ 0.004264] Checking 'hlt' instruction... OK. [ 0.020420] SMP alternatives: switching to UP code [ 0.024460] ACPI: Core revision 20090903 [ 0.036071] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.036508] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.079498] CPU0: Intel(R) Celeron(R) M CPU 440 @ 1.86GHz stepping 0c [ 0.080001] APIC calibration not consistent with PM-Timer: 175ms instead of 100ms [ 0.080001] APIC delta adjusted to PM-Timer: 831247 (1462980) [ 0.080001] Brought up 1 CPUs [ 0.080001] Total of 1 processors activated (3723.76 BogoMIPS). [ 0.080001] CPU0 attaching NULL sched-domain. [ 0.080001] devtmpfs: initialized [ 0.080001] regulator: core version 0.5 [ 0.080001] NET: Registered protocol family 16 [ 0.080001] ACPI: bus type pci registered [ 0.080001] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.080001] PCI: MCFG area at e0000000 reserved in E820 [ 0.080001] PCI: Using MMCONFIG for extended config space [ 0.080001] PCI: Using configuration type 1 for base access [ 0.080001] bio: create slab <bio-0> at 0 [ 0.080001] ACPI: EC: Look up EC in DSDT [ 0.081984] ACPI: BIOS _OSI(Linux) query ignored [ 0.082823] ACPI: Interpreter enabled [ 0.082827] ACPI: (supports S0 S3 S4 S5) [ 0.082849] ACPI: Using IOAPIC for interrupt routing [ 0.129472] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62 [ 0.129938] ACPI: No dock devices found. [ 0.130485] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.130576] pci 0000:00:02.0: reg 10 32bit mmio: [0xd0200000-0xd027ffff] [ 0.130582] pci 0000:00:02.0: reg 14 io port: [0x5088-0x508f] [ 0.130587] pci 0000:00:02.0: reg 18 32bit mmio pref: [0xc0000000-0xcfffffff] [ 0.130593] pci 0000:00:02.0: reg 1c 32bit mmio: [0xd0300000-0xd033ffff] [ 0.130634] pci 0000:00:02.1: reg 10 32bit mmio: [0xd0280000-0xd02fffff] [ 0.130750] pci 0000:00:1b.0: reg 10 64bit mmio: [0xd0340000-0xd0343fff] [ 0.130812] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.130817] pci 0000:00:1b.0: PME# disabled [ 0.130912] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.130917] pci 0000:00:1c.0: PME# disabled [ 0.131013] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.131018] pci 0000:00:1c.1: PME# disabled [ 0.131115] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.131120] pci 0000:00:1c.2: PME# disabled [ 0.131217] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.131222] pci 0000:00:1c.3: PME# disabled [ 0.131289] pci 0000:00:1d.0: reg 20 io port: [0x50a0-0x50bf] [ 0.131355] pci 0000:00:1d.1: reg 20 io port: [0x50c0-0x50df] [ 0.131420] pci 0000:00:1d.2: reg 20 io port: [0x50e0-0x50ff] [ 0.131486] pci 0000:00:1d.3: reg 20 io port: [0x5400-0x541f] [ 0.131556] pci 0000:00:1d.7: reg 10 32bit mmio: [0xd0544000-0xd05443ff] [ 0.131620] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.131626] pci 0000:00:1d.7: PME# disabled [ 0.131805] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 0.131812] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO [ 0.131817] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0230 (mask 000f) [ 0.131822] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at ff20 (mask 000f) [ 0.131893] pci 0000:00:1f.2: reg 10 io port: [0x00-0x07] [ 0.131901] pci 0000:00:1f.2: reg 14 io port: [0x00-0x03] [ 0.131910] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07] [ 0.131918] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03] [ 0.131927] pci 0000:00:1f.2: reg 20 io port: [0x5440-0x544f] [ 0.131963] pci 0000:00:1f.2: PME# supported from D3hot [ 0.131968] pci 0000:00:1f.2: PME# disabled [ 0.132041] pci 0000:00:1f.3: reg 20 io port: [0x5420-0x543f] [ 0.132133] pci 0000:00:1c.0: bridge io port: [0x00-0xfff] [ 0.132138] pci 0000:00:1c.0: bridge 32bit mmio: [0x000000-0x0fffff] [ 0.132341] pci 0000:05:00.0: reg 10 32bit mmio: [0xd0000000-0xd0003fff] [ 0.132438] pci 0000:05:00.0: supports D1 D2 [ 0.132481] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.132580] pci 0000:00:1c.3: bridge 32bit mmio: [0xd0000000-0xd00fffff] [ 0.132631] pci 0000:06:01.0: reg 10 32bit mmio: [0xd0100000-0xd0101fff] [ 0.132688] pci 0000:06:01.0: supports D1 D2 [ 0.132690] pci 0000:06:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.132696] pci 0000:06:01.0: PME# disabled [ 0.132754] pci 0000:06:04.0: reg 10 32bit mmio: [0x000000-0x000fff] [ 0.132782] pci 0000:06:04.0: supports D1 D2 [ 0.132785] pci 0000:06:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.132791] pci 0000:06:04.0: PME# disabled [ 0.132841] pci 0000:06:04.1: reg 10 32bit mmio: [0xd0103000-0xd010307f] [ 0.132912] pci 0000:06:04.1: supports D1 D2 [ 0.132914] pci 0000:06:04.1: PME# supported from D0 D1 D2 D3hot [ 0.132920] pci 0000:06:04.1: PME# disabled [ 0.132970] pci 0000:06:04.2: reg 10 32bit mmio: [0xd0103400-0xd01034ff] [ 0.133041] pci 0000:06:04.2: supports D1 D2 [ 0.133044] pci 0000:06:04.2: PME# supported from D0 D1 D2 D3hot [ 0.133050] pci 0000:06:04.2: PME# disabled [ 0.133100] pci 0000:06:04.3: reg 10 32bit mmio: [0xd0103800-0xd010387f] [ 0.133171] pci 0000:06:04.3: supports D1 D2 [ 0.133173] pci 0000:06:04.3: PME# supported from D0 D1 D2 D3hot [ 0.133179] pci 0000:06:04.3: PME# disabled [ 0.133229] pci 0000:06:04.4: reg 10 32bit mmio: [0x000000-0x0000ff] [ 0.133299] pci 0000:06:04.4: supports D1 D2 [ 0.133302] pci 0000:06:04.4: PME# supported from D0 D1 D2 D3hot [ 0.133308] pci 0000:06:04.4: PME# disabled [ 0.133377] pci 0000:00:1e.0: transparent bridge [ 0.133386] pci 0000:00:1e.0: bridge 32bit mmio: [0xd0100000-0xd01fffff] [ 0.133446] pci_bus 0000:00: on NUMA node 0 [ 0.133451] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.133666] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.133744] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 0.133822] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] [ 0.133905] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 0.134007] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 0.137985] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 5 *6 10 12 14 15) [ 0.138092] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 5 6 *11 12 14 15) [ 0.138196] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 5 6 10 12 14 15) *11 [ 0.138302] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 5 6 11 12 14 15) *10 [ 0.138407] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 5 6 10 12 14 15) *0, disabled. [ 0.138514] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 5 6 11 12 14 15) *10 [ 0.138619] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 5 6 *10 12 14 15) [ 0.138726] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 *5 6 11 12 14 15) [ 0.138834] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.138845] vgaarb: loaded [ 0.138918] PCI: Using ACPI for IRQ routing [ 0.138922] pci 0000:00:1c.0: BAR 13: can't allocate resource [ 0.138924] pci 0000:00:1c.0: BAR 14: can't allocate resource [ 0.139112] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.139120] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.139125] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.144022] Switching to clocksource tsc [ 0.145406] pnp: PnP ACPI init [ 0.145422] ACPI: bus type pnp registered [ 0.168759] pnp: PnP ACPI: found 10 devices [ 0.168762] ACPI: ACPI bus type pnp unregistered [ 0.168766] PnPBIOS: Disabled by ACPI PNP [ 0.168778] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved [ 0.168782] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved [ 0.168786] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved [ 0.168789] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved [ 0.168793] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.168797] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved [ 0.168804] system 00:04: iomem range 0xfed00000-0xfed003ff has been reserved [ 0.168810] system 00:06: ioport range 0x800-0x80f has been reserved [ 0.168814] system 00:06: ioport range 0x1000-0x107f has been reserved [ 0.168818] system 00:06: ioport range 0x1180-0x11bf has been reserved [ 0.168821] system 00:06: ioport range 0x1640-0x164f has been reserved [ 0.168824] system 00:06: ioport range 0xfe00-0xfefe has been reserved [ 0.168828] system 00:06: ioport range 0xff2c-0xff2f has been reserved [ 0.203618] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 [ 0.203623] pci 0000:00:1c.0: IO window: 0x2000-0x2fff [ 0.203630] pci 0000:00:1c.0: MEM window: 0x44000000-0x441fffff [ 0.203636] pci 0000:00:1c.0: PREFETCH window: 0x00000044200000-0x000000443fffff [ 0.203645] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03 [ 0.203649] pci 0000:00:1c.1: IO window: 0x3000-0x3fff [ 0.203656] pci 0000:00:1c.1: MEM window: 0x44400000-0x445fffff [ 0.203661] pci 0000:00:1c.1: PREFETCH window: 0x00000044600000-0x000000447fffff [ 0.203670] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04 [ 0.203674] pci 0000:00:1c.2: IO window: 0x4000-0x4fff [ 0.203681] pci 0000:00:1c.2: MEM window: 0x44800000-0x449fffff [ 0.203686] pci 0000:00:1c.2: PREFETCH window: 0x00000044a00000-0x00000044bfffff [ 0.203695] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:05 [ 0.203699] pci 0000:00:1c.3: IO window: 0x6000-0x6fff [ 0.203706] pci 0000:00:1c.3: MEM window: 0xd0000000-0xd00fffff [ 0.203712] pci 0000:00:1c.3: PREFETCH window: 0x00000044c00000-0x00000044dfffff [ 0.203731] pci 0000:06:04.0: CardBus bridge, secondary bus 0000:07 [ 0.203733] pci 0000:06:04.0: IO window: 0x007000-0x0070ff [ 0.203740] pci 0000:06:04.0: IO window: 0x007400-0x0074ff [ 0.203746] pci 0000:06:04.0: PREFETCH window: 0x40000000-0x43ffffff [ 0.203752] pci 0000:06:04.0: MEM window: 0x48000000-0x4bffffff [ 0.203759] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06 [ 0.203763] pci 0000:00:1e.0: IO window: 0x7000-0x7fff [ 0.203770] pci 0000:00:1e.0: MEM window: 0xd0100000-0xd01fffff [ 0.203775] pci 0000:00:1e.0: PREFETCH window: 0x40000000-0x43ffffff [ 0.203792] pci 0000:00:1c.0: enabling device (0100 -> 0103) [ 0.203801] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.203809] pci 0000:00:1c.0: setting latency timer to 64 [ 0.203820] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 0.203826] pci 0000:00:1c.1: setting latency timer to 64 [ 0.203837] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.203843] pci 0000:00:1c.2: setting latency timer to 64 [ 0.203854] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.203860] pci 0000:00:1c.3: setting latency timer to 64 [ 0.203866] pci 0000:00:1e.0: enabling device (0004 -> 0007) [ 0.203872] pci 0000:00:1e.0: setting latency timer to 64 [ 0.203885] pci 0000:06:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.203893] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.203897] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.203900] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff] [ 0.203903] pci_bus 0000:02: resource 1 mem: [0x44000000-0x441fffff] [ 0.203906] pci_bus 0000:02: resource 2 pref mem [0x44200000-0x443fffff] [ 0.203909] pci_bus 0000:03: resource 0 io: [0x3000-0x3fff] [ 0.203912] pci_bus 0000:03: resource 1 mem: [0x44400000-0x445fffff] [ 0.203915] pci_bus 0000:03: resource 2 pref mem [0x44600000-0x447fffff] [ 0.203918] pci_bus 0000:04: resource 0 io: [0x4000-0x4fff] [ 0.203921] pci_bus 0000:04: resource 1 mem: [0x44800000-0x449fffff] [ 0.203924] pci_bus 0000:04: resource 2 pref mem [0x44a00000-0x44bfffff] [ 0.203927] pci_bus 0000:05: resource 0 io: [0x6000-0x6fff] [ 0.203930] pci_bus 0000:05: resource 1 mem: [0xd0000000-0xd00fffff] [ 0.203933] pci_bus 0000:05: resource 2 pref mem [0x44c00000-0x44dfffff] [ 0.203936] pci_bus 0000:06: resource 0 io: [0x7000-0x7fff] [ 0.203939] pci_bus 0000:06: resource 1 mem: [0xd0100000-0xd01fffff] [ 0.203942] pci_bus 0000:06: resource 2 pref mem [0x40000000-0x43ffffff] [ 0.203955] pci_bus 0000:06: resource 3 io: [0x00-0xffff] [ 0.203958] pci_bus 0000:06: resource 4 mem: [0x000000-0xffffffff] [ 0.203961] pci_bus 0000:07: resource 0 io: [0x7000-0x70ff] [ 0.203964] pci_bus 0000:07: resource 1 io: [0x7400-0x74ff] [ 0.203967] pci_bus 0000:07: resource 2 pref mem [0x40000000-0x43ffffff] [ 0.203970] pci_bus 0000:07: resource 3 mem: [0x48000000-0x4bffffff] [ 0.204003] NET: Registered protocol family 2 [ 0.204090] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.204400] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.205113] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.205469] TCP: Hash tables configured (established 131072 bind 65536) [ 0.205472] TCP reno registered [ 0.205585] NET: Registered protocol family 1 [ 0.205609] pci 0000:00:02.0: Boot video device [ 0.205786] Unpacking initramfs... [ 0.476555] Freeing initrd memory: 8459k freed [ 0.482221] Simple Boot Flag at 0x36 set to 0x1 [ 0.482507] audit: initializing netlink socket (disabled) [ 0.482524] type=2000 audit(1321791927.479:1): initialized [ 0.486996] highmem bounce pool size: 64 pages [ 0.487002] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.488503] VFS: Disk quotas dquot_6.5.2 [ 0.488567] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.488652] msgmni has been set to 1739 [ 0.488838] alg: No test for stdrng (krng) [ 0.488895] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.488899] io scheduler noop registered [ 0.488901] io scheduler anticipatory registered [ 0.488903] io scheduler deadline registered [ 0.488940] io scheduler cfq registered (default) [ 0.489096] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X [ 0.489108] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.489273] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X [ 0.489284] pcieport 0000:00:1c.1: setting latency timer to 64 [ 0.489444] pcieport 0000:00:1c.2: irq 26 for MSI/MSI-X [ 0.489455] pcieport 0000:00:1c.2: setting latency timer to 64 [ 0.489612] pcieport 0000:00:1c.3: irq 27 for MSI/MSI-X [ 0.489623] pcieport 0000:00:1c.3: setting latency timer to 64 [ 0.489796] isapnp: Scanning for PnP cards... [ 0.843862] isapnp: No Plug & Play device found [ 0.845368] Linux agpgart interface v0.103 [ 0.845441] agpgart-intel 0000:00:00.0: Intel 945GM Chipset [ 0.845684] agpgart-intel 0000:00:00.0: detected 7932K stolen memory [ 0.848329] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000 [ 0.848402] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.848812] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS0] at 0x60,0x64 irq 1,12 [ 0.849158] i8042.c: Detected active multiplexing controller, rev 1.1. [ 0.849244] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.849255] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 0.849289] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 0.849313] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 0.849334] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 0.849422] mice: PS/2 mouse device common for all mice [ 0.849486] rtc_cmos 00:07: RTC can wake from S4 [ 0.849525] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 0.849560] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.849571] cpuidle: using governor ladder [ 0.849573] cpuidle: using governor menu [ 0.849577] No iBFT detected. [ 0.849941] TCP cubic registered [ 0.850118] NET: Registered protocol family 10 [ 0.850874] Mobile IPv6 [ 0.850879] NET: Registered protocol family 17 [ 0.850900] Using IPI No-Shortcut mode [ 0.850995] PM: Resume from disk failed. [ 0.851008] registered taskstats version 1 [ 0.851522] rtc_cmos 00:07: setting system clock to 2011-11-20 12:25:28 UTC (1321791928) [ 0.851579] Initalizing network drop monitor service [ 0.851606] Freeing unused kernel memory: 380k freed [ 0.851817] Write protecting the kernel text: 2508k [ 0.851839] Write protecting the kernel read-only data: 920k [ 0.852125] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 0.872112] udev[46]: starting version 164 [ 1.158603] usbcore: registered new interface driver usbfs [ 1.158757] usbcore: registered new interface driver hub [ 1.158909] usbcore: registered new device driver usb [ 1.170553] SCSI subsystem initialized [ 1.209161] sdhci: Secure Digital Host Controller Interface driver [ 1.209166] sdhci: Copyright(c) Pierre Ossman [ 1.209510] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.209556] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.209581] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 1.209587] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 1.209611] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 1.209646] ehci_hcd 0000:00:1d.7: using broken periodic workaround [ 1.209659] ehci_hcd 0000:00:1d.7: debug port 1 [ 1.213553] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 1.213570] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd0544000 [ 1.226740] sdhci-pci 0000:06:04.2: SDHCI controller found [1524:0550] (rev 1) [ 1.226758] sdhci-pci 0000:06:04.2: enabling device (0000 -> 0002) [ 1.226766] sdhci-pci 0000:06:04.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.226880] Registered led device: mmc0:: [ 1.226952] mmc0: SDHCI controller on PCI [0000:06:04.2] using PIO [ 1.226966] sdhci-pci 0000:06:04.4: SDHCI controller found [1524:0551] (rev 1) [ 1.226981] sdhci-pci 0000:06:04.4: enabling device (0000 -> 0002) [ 1.226987] sdhci-pci 0000:06:04.4: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.227059] Registered led device: mmc1:: [ 1.227113] mmc1: SDHCI controller on PCI [0000:06:04.4] using PIO [ 1.227487] libata version 3.00 loaded. [ 1.231899] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.231943] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.231946] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.231949] usb usb1: Product: EHCI Host Controller [ 1.231952] usb usb1: Manufacturer: Linux 2.6.32-5-686 ehci_hcd [ 1.231954] usb usb1: SerialNumber: 0000:00:1d.7 [ 1.232063] usb usb1: configuration #1 chosen from 1 choice [ 1.232099] hub 1-0:1.0: USB hub found [ 1.232108] hub 1-0:1.0: 8 ports detected [ 1.236329] thermal LNXTHERM:01: registered as thermal_zone0 [ 1.236342] ACPI: Thermal Zone [TZ00] (67 C) [ 1.236452] ata_piix 0000:00:1f.2: version 2.13 [ 1.236474] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.236481] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] [ 1.245334] uhci_hcd: USB Universal Host Controller Interface driver [ 1.245694] b43-pci-bridge 0000:05:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 1.245706] b43-pci-bridge 0000:05:00.0: setting latency timer to 64 [ 1.247111] thermal LNXTHERM:02: registered as thermal_zone1 [ 1.247122] ACPI: Thermal Zone [TZ01] (67 C) [ 1.304093] ssb: Sonics Silicon Backplane found on PCI device 0000:05:00.0 [ 1.381209] b44 0000:06:01.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 1.381222] b44 0000:06:01.0: setting latency timer to 64 [ 1.392018] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 1.392114] scsi0 : ata_piix [ 1.392280] scsi1 : ata_piix [ 1.393356] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x5440 irq 14 [ 1.393359] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x5448 irq 15 [ 1.393454] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.393464] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.393469] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.393483] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.393515] uhci_hcd 0000:00:1d.0: irq 23, io base 0x000050a0 [ 1.393561] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.393564] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.393567] usb usb2: Product: UHCI Host Controller [ 1.393570] usb usb2: Manufacturer: Linux 2.6.32-5-686 uhci_hcd [ 1.393572] usb usb2: SerialNumber: 0000:00:1d.0 [ 1.393657] usb usb2: configuration #1 chosen from 1 choice [ 1.393690] hub 2-0:1.0: USB hub found [ 1.393698] hub 2-0:1.0: 2 ports detected [ 1.393754] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.393761] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 1.393765] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.393772] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 1.393810] uhci_hcd 0000:00:1d.1: irq 19, io base 0x000050c0 [ 1.393845] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.393848] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.393851] usb usb3: Product: UHCI Host Controller [ 1.393853] usb usb3: Manufacturer: Linux 2.6.32-5-686 uhci_hcd [ 1.393855] usb usb3: SerialNumber: 0000:00:1d.1 [ 1.393917] usb usb3: configuration #1 chosen from 1 choice [ 1.393946] hub 3-0:1.0: USB hub found [ 1.393954] hub 3-0:1.0: 2 ports detected [ 1.394002] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.394009] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 1.394013] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.394020] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 1.394057] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000050e0 [ 1.394091] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.394094] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.394097] usb usb4: Product: UHCI Host Controller [ 1.394099] usb usb4: Manufacturer: Linux 2.6.32-5-686 uhci_hcd [ 1.394102] usb usb4: SerialNumber: 0000:00:1d.2 [ 1.394159] usb usb4: configuration #1 chosen from 1 choice [ 1.394186] hub 4-0:1.0: USB hub found [ 1.394194] hub 4-0:1.0: 2 ports detected [ 1.394239] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 1.394248] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 1.394252] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 1.394259] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 1.394294] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00005400 [ 1.394330] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.394333] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.394336] usb usb5: Product: UHCI Host Controller [ 1.394338] usb usb5: Manufacturer: Linux 2.6.32-5-686 uhci_hcd [ 1.394341] usb usb5: SerialNumber: 0000:00:1d.3 [ 1.394398] usb usb5: configuration #1 chosen from 1 choice [ 1.394425] hub 5-0:1.0: USB hub found [ 1.394432] hub 5-0:1.0: 2 ports detected [ 1.440089] ssb: Sonics Silicon Backplane found on PCI device 0000:06:01.0 [ 1.440268] b44.c:v2.0 [ 1.460969] eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:16:d4:d8:4a:92 [ 1.544020] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 1.556590] ata1.00: ATA-7: Hitachi HTS541680J9SA00, SB2OC70P, max UDMA/100 [ 1.556593] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.572537] ata1.00: configured for UDMA/100 [ 1.572660] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54168 SB2O PQ: 0 ANSI: 5 [ 1.580391] ata2.00: ATAPI: Slimtype DVD A DS8A1P, CA11, max UDMA/33 [ 1.620294] ata2.00: configured for UDMA/33 [ 1.624054] scsi 1:0:0:0: CD-ROM Slimtype DVD A DS8A1P CA11 PQ: 0 ANSI: 5 [ 1.649662] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 1.649718] sd 0:0:0:0: [sda] Write Protect is off [ 1.649722] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.649746] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.649890] sda:sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.660919] Uniform CD-ROM driver Revision: 3.20 [ 1.661223] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.669686] sda1 sda2 < [ 1.678009] usb 1-1: New USB device found, idVendor=12d1, idProduct=1003 [ 1.678013] usb 1-1: New USB device strings: Mfr=3, Product=2, SerialNumber=0 [ 1.678016] usb 1-1: Product: HUAWEI Mobile [ 1.678018] usb 1-1: Manufacturer: HUAWEI Technology [ 1.678105] usb 1-1: configuration #1 chosen from 1 choice [ 1.693975] Initializing USB Mass Storage driver... [ 1.694061] sda5 > [ 1.694659] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.704437] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.704941] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.705124] scsi4 : SCSI emulation for USB Mass Storage devices [ 1.705275] usb-storage: device found at 2 [ 1.705277] usb-storage: waiting for device to settle before scanning [ 1.705528] scsi5 : SCSI emulation for USB Mass Storage devices [ 1.705649] usbcore: registered new interface driver usb-storage [ 1.705653] USB Mass Storage support registered. [ 1.706107] usb-storage: device found at 2 [ 1.706111] usb-storage: waiting for device to settle before scanning [ 2.026613] PM: Starting manual resume from disk [ 2.026617] PM: Resume from partition 8:5 [ 2.026619] PM: Checking hibernation image. [ 2.027325] PM: Error -22 checking image file [ 2.027327] PM: Resume from disk failed. [ 2.047715] kjournald starting. Commit interval 5 seconds [ 2.047726] EXT3-fs: mounted filesystem with ordered data mode. [ 2.128029] usb 4-1: new low speed USB device using uhci_hcd and address 2 [ 2.302127] usb 4-1: New USB device found, idVendor=093a, idProduct=2510 [ 2.302131] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.302135] usb 4-1: Product: USB Optical Mouse [ 2.302137] usb 4-1: Manufacturer: PixArt [ 2.302243] usb 4-1: configuration #1 chosen from 1 choice [ 4.202866] udev[372]: starting version 164 [ 4.870004] cfg80211: Using static regulatory domain info [ 4.870008] cfg80211: Regulatory domain: US [ 4.870010] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 4.870013] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) [ 4.870017] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 4.870020] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 4.870023] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 4.870026] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 4.870029] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) [ 4.870316] cfg80211: Calling CRDA for country: US [ 5.492115] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 5.492294] ACPI: Lid Switch [LID] [ 5.492718] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1280b1, caps: 0xa04713/0x204000/0x0 [ 5.492741] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 [ 5.492845] ACPI: Sleep Button [SLPB] [ 5.493298] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3 [ 5.493400] ACPI: Power Button [PWRB] [ 5.493519] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 [ 5.493589] ACPI: Power Button [PWRF] [ 5.495429] ACPI: AC Adapter [ACAD] (on-line) [ 5.505696] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 5.514766] Marking TSC unstable due to TSC halts in idle [ 5.517279] processor LNXCPU:00: registered as cooling_device0 [ 5.517543] Switching to clocksource hpet [ 5.527801] ACPI: WMI: Mapper loaded [ 5.532104] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input6 [ 5.543005] ACPI: EC: GPE storm detected, transactions will use polling mode [ 5.556092] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input7 [ 5.556184] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 5.698075] usbcore: registered new interface driver usbserial [ 5.698273] USB Serial support registered for generic [ 5.698485] usbcore: registered new interface driver usbserial_generic [ 5.698487] usbserial: USB Serial Driver core [ 6.156128] ACPI: Battery Slot [BAT1] (battery present) [ 6.552681] USB Serial support registered for GSM modem (1-port) [ 6.552940] option 1-1:1.0: GSM modem (1-port) converter detected [ 6.553133] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB0 [ 6.553149] option 1-1:1.1: GSM modem (1-port) converter detected [ 6.553718] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB1 [ 6.553958] usbcore: registered new interface driver option [ 6.553961] option: v0.7.2:USB Driver for GSM modems [ 6.576617] yenta_cardbus 0000:06:04.0: CardBus bridge found [1025:0090] [ 6.576643] yenta_cardbus 0000:06:04.0: Using CSCINT to route CSC interrupts to PCI [ 6.576646] yenta_cardbus 0000:06:04.0: Routing CardBus interrupts to PCI [ 6.576652] yenta_cardbus 0000:06:04.0: TI: mfunc 0x90501212, devctl 0x44 [ 6.576689] acer-wmi: Acer Laptop ACPI-WMI Extras [ 6.705892] b43-phy0: Broadcom 4311 WLAN found (core revision 10) [ 6.705917] usb-storage: device scan complete [ 6.706030] intel_rng: FWH not detected [ 6.706062] usb-storage: device scan complete [ 6.709395] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 6.709403] ACPI: I/O resource 0000:00:1f.3 [0x5420-0x543f] conflicts with ACPI region SMBI [0x5420-0x542f] [ 6.709492] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 6.709782] scsi 5:0:0:0: Direct-Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 2 [ 6.710058] scsi 4:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2 [ 6.714311] usbcore: registered new interface driver hiddev [ 6.715481] sr1: scsi-1 drive [ 6.715585] sr 4:0:0:0: Attached scsi CD-ROM sr1 [ 6.715660] sr 4:0:0:0: Attached scsi generic sg2 type 5 [ 6.716285] sd 5:0:0:0: Attached scsi generic sg3 type 0 [ 6.718601] sd 5:0:0:0: [sdb] Attached SCSI removable disk [ 6.727538] input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/input/input8 [ 6.727647] generic-usb 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:1d.2-1/input0 [ 6.727674] usbcore: registered new interface driver usbhid [ 6.727677] usbhid: v2.6:USB HID core driver [ 6.809007] yenta_cardbus 0000:06:04.0: ISA IRQ mask 0x0cf8, PCI irq 16 [ 6.809013] yenta_cardbus 0000:06:04.0: Socket status: 30000006 [ 6.809018] pci_bus 0000:06: Raising subordinate bus# of parent bus (#06) from #07 to #0a [ 6.809029] yenta_cardbus 0000:06:04.0: pcmcia: parent PCI bridge I/O window: 0x7000 - 0x7fff [ 6.809033] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x7000-0x7fff: clean. [ 6.809284] yenta_cardbus 0000:06:04.0: pcmcia: parent PCI bridge Memory window: 0xd0100000 - 0xd01fffff [ 6.809288] yenta_cardbus 0000:06:04.0: pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x43ffffff [ 6.824942] phy0: Selected rate control algorithm 'minstrel' [ 6.825641] Registered led device: b43-phy0::tx [ 6.825658] Registered led device: b43-phy0::rx [ 6.825675] Registered led device: b43-phy0::radio [ 6.825747] Broadcom 43xx driver loaded [ Features: PMLS, Firmware-ID: FW13 ] [ 7.231450] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean. [ 7.233588] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 7.234434] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean. [ 7.235129] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean. [ 7.238406] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. [ 7.677933] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 7.677987] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 7.821725] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9 [ 9.021273] Adding 2650684k swap on /dev/sda5. Priority:-1 extents:1 across:2650684k [ 9.560608] EXT3 FS on sda1, internal journal [ 9.781398] loop: module loaded [ 10.064768] fuse init (API version 7.13) [ 12.539829] apm: BIOS not found. [ 18.069341] lp: driver loaded but no devices found [ 18.194145] ppdev: user-space parallel port driver [ 20.899189] [drm] Initialized drm 1.1.0 20060810 [ 20.944406] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 20.944413] pci 0000:00:02.0: setting latency timer to 64 [ 20.949047] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 39.950816] seahorse-agent[2105]: segfault at 0 ip b76d5eb6 sp bf93e810 error 4 in libseahorse.so.0.0.0[b76b5000+5c000] [ 91.308408] PPP generic driver version 2.4.2 [ 91.361322] PPP BSD Compression module registered [ 91.373539] PPP Deflate Compression module registered draculla:/home/michal#
Jeszcze fdisk -l
draculla:/home/michal# fdisk -l Dysk /dev/sda: 80.0 GB, bajtów: 80026361856 głowic: 255, sektorów/ścieżkę: 63, cylindrów: 9729 Jednostka = cylindrów, czyli 16065 * 512 = 8225280 bajtów Rozmiar sektora (logiczny/fizyczny) w bajtach: 512 / 512 Rozmiar we/wy (minimalny/optymalny) w bajtach: 512 / 512 Identyfikator dysku: 0x0a1506fc Urządzenie Rozruch Początek Koniec Bloków ID System /dev/sda1 * 1 9399 75497436 83 Linux /dev/sda2 9400 9729 2650725 5 Rozszerzona /dev/sda5 9400 9729 2650693+ 82 Linux swap / Solaris draculla:/home/michal#
Offline
Wynik polecenia lsmod by się przydał jeszcze... Jądro swoje czy dystrybucyjne? dmesg oczywiście po podłączeniu sprzętu nie? ;p
Ostatnio edytowany przez P@blo (2011-11-20 14:12:56)
Offline
Po pierwsze:
do sprawdzenia, dlaczego nie widzi karty pamięci i Cdromu, zrób tak:
W terminalu wchodzisz na konto root i odpalasz proces
udevadm monitor
i podłączasz swoją karte, pendraka, czy co tam innego nie działa, a w termialu widać wyraźnie, jak system reaguje na podłączenie urządzenia.
Przykładowo mój pędrak w udevie wygląda tak.
poza tym zainstaluj sobie udisks:
http://packages.debian.org/squeeze/udisks
to fajny program do montowania pendraków, kart pamięci, plyt cd itp.
Po restarcie powinie automatycznie montować takie drobiazgi.
jeżeli będą jakieś komunikaty udeva, a coś się nie zamontuje, to wtedy cały listing wrzuć na wkleja i daj linka.
Jak nic się nie pojawi, to wystarczy o tym zawiadomić ;P
i kawałek z przeszkola:
wynik polecenia
groups
z konta użytkownika.
To by było na tyle
;-)
Ostatnio edytowany przez Jacekalex (2011-11-20 14:58:18)
Offline
Polecenie groups daje:
michal@draculla:~$ groups michal dialout cdrom floppy audio video plugdev netdev powerdev michal@draculla:~$
Polecenie
udev
niestety nie pokazuje nic.
draculla:/home/michal# udevadm monitor monitor will print the received events for: UDEV - the event which udev sends out after rule processing KERNEL - the kernel uevent
Pakiet Udisks zainstalowany i dalej nic.
draculla:/home/michal# aptitude search udisks i udisks - Abstrakcja do wyliczania urządzeń blokowyc p udisks-doc - abstraction for enumerating block devices draculla:/home/michal#
Jest jeszcze taka sprawa,. że podczas startu systemu wyskakuje kilka błędów, jednak nie mogę zatrzymać żeby przepisać czego błąd dotyczy, a w /var/log/boot nie zapisuje tego. Udało mi się wychwycić, że błędy dotyczą
udevd[372]: SYSFS{}=will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}=to match a parent device
Ostatnio edytowany przez milik (2011-11-21 08:49:09)
Offline
Nikt nie ma pomysłu?
Offline
Napisz coś więcej o tym systemie.
Jak byl instalowany jakie aktualizacje.Co w nim grzebałeś
udevd[372]: SYSFS{}=will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}=to match a parent device
To świadczy o jakiejś mieszance albo złych plikach konfiguracyjnych.
Jak wersja udev ?
Offline
A jak sprawdzić wersję udev?
Jak próbowałem zrobić
apt-get install udev
to tak mi namieszało w systemie, że się posypał hehe To jest Debian Lenny aktualizowany w ten sposób, że wrzuciłem repo Squeze i zrobiłem
apt-get update
i
apt-get upgrade
, później jak wynikły te problemy z urządzeniami próbowałem aktualizować
udev
ze skutkami jak wyżej.
Ostatnio edytowany przez milik (2011-11-22 09:52:53)
Offline
Biedactwo, czytać ze zrozumieniem pani w szkole nie nauczyła?
Po włączeniu polecenia
udevadm monitor
podłączyłeś jakieś urządzenie do usb? jakiekolwiek?
przecież włączyłeś monitor działania udeva, który pokazuje bierzące zdarzenia z działania udeva, polegajace na dodawaniu i usuwaniu urządzeń, każde podłączenie czegokolwiek do usb, czy choćby włożenie płyty Cd powinno wywalić stos komunikatów:
Przykład:
~ # udevadm monitor monitor will print the received events for: UDEV - the event which udev sends out after rule processing KERNEL - the kernel uevent
Nie ma żadnego komunikatu kominkatu poza widocznym,...
Ale wkładam płytkę CD do napędu, i widzę:
KERNEL[1321952468.622150] change /devices/pci0000:00/0000:00:1f.2/host5/target5:0:0/5:0:0:0/block/sr0 (block) UDEV [1321952469.588824] change /devices/pci0000:00/0000:00:1f.2/host5/target5:0:0/5:0:0:0/block/sr0 (block) KERNEL[1321952476.509759] change /devices/pci0000:00/0000:00:1f.2/host5/target5:0:0/5:0:0:0/block/sr0 (block) UDEV [1321952479.315855] change /devices/pci0000:00/0000:00:1f.2/host5/target5:0:0/5:0:0:0/block/sr0 (block)
To leci jak serial w telewizji, po prostu na bierząco pokazuje, co robi udev.
Wersja udeva? jak sprawdzić?
Próbowałeś:
dpkg -l | grep udev
To by było na tyle
;-)
Ostatnio edytowany przez Jacekalex (2011-11-22 10:11:46)
Offline
Dawno temu chodziłem do szkoły to i zapomniałem.
draculla:/home/michal# dpkg -l | grep udev ii libgudev-1.0-0 164-3 GObject-based wrapper library for libudev ii libudev0 164-3 libudev shared library ii udev 164-3 /dev/ and hotplug management daemon draculla:/home/michal#
Offline
A apt-get dist-upgrade robiłeś czy tylko samo apt-get upgrade? Przy aktualizacji o całe wydanie pierwsze zazwyczaj nie zaktualizuje wszystkiego… Zrównaj wszystko do Squeeze, sprawdź potem czy nie zostały Ci jeszcze jakieś pakiety, które w jego repozytorium nie są dostępne. Odnośnie tego: post 7 — nie wiem czy to ma związek, ale co w końcu zrobiłeś z tymi plikami? Przy prawidłowej aktualizacji system sam powinien migrować na nowe wersje.
Offline
Wykonałem też
apt-get dist-upgrade
i o dziwo wszystko przebiegło bez problemów. System się zaktualizował, Cd-rom zaczął działać ale niestety karty pamięci dalej nie montuje.
Offline
To pokaż teraz fdisk -l z włożoną kartą pamięci.
Offline
fdisk -l
pokazuje to:
draculla:/home/michal# fdisk -l Dysk /dev/sda: 80.0 GB, bajtów: 80026361856 głowic: 255, sektorów/ścieżkę: 63, cylindrów: 9729 Jednostka = cylindrów, czyli 16065 * 512 = 8225280 bajtów Rozmiar sektora (logiczny/fizyczny) w bajtach: 512 / 512 Rozmiar we/wy (minimalny/optymalny) w bajtach: 512 / 512 Identyfikator dysku: 0x0a1506fc Urządzenie Rozruch Początek Koniec Bloków ID System /dev/sda1 * 1 9399 75497436 83 Linux /dev/sda2 9400 9729 2650725 5 Rozszerzona /dev/sda5 9400 9729 2650693+ 82 Linux swap / Solaris draculla:/home/michal#
sda2 to może być modem z play, bo mam mobile connect.
Offline
Sda2 to nie jest żaden modem tylko oznaczenie partycji rozszerzonej.
Nie ma karty.
Pokaż teraz dmesg
Offline
Wynik w pliku: http://www.sendspace.pl/file/965df5c3e5b24ccf7ca734e
Offline
a ze sie zapytam urządzena są włączone w biosie ?
cdrom i czytnik działają na windzie ? ( o ile cos takiego masz ) ,
jak nie masz windy to wsadz do napędu jakąś botowalną płytye cd / dvd no i ustaw w biosie botowanie z napędu. Jak zaczyna bootować to działa jak nie zaczyna to płyta uwalona albo napęd, no i w ostateczności nie ustawiłeś bootowania z napędu.
dziwna rzecz bo napęd działa z kontrolera dysku twardego ( jeżeli jest to pc to w sumie możesz zamienić dysk i napęd na taśmach i zobaczyć co sie stanie )
natomiast czytniki kart pamięci są podłączone do interfejsu usb.
Ostatnio edytowany przez gindek (2011-12-01 20:50:05)
Offline
Normalnie wszystko działa, bootuje z płyty więc w BIOSie jest włączony. Problem jest gdzieś w systemie.
Offline
Panowie, czy mógłbym liczyć na pomoc z tą kartą pamięci? CD-ROM już działa, sam się naprawił po którymś tam upgradzie, natomiast karta pamięci dalej nie działa, a jest to dla mnie dość ważne, bo nie mogę zgrać zdjęć z aparatu.
Offline
Spróbujemy.
Dwa pytania
1.Czy kiedykolwiek widział tę kartę pamięci ?
2.Jaki ten czytnik jest wbudowany w lapka czy moze jakiś zewnętrzny wkładany w usb ?
Offline
To jeszcze możesz wykonać na konsoli:
lsusb
przy podłączonym urządzeniu na usb oczywiście.
Poza tym mam takie podejrzenie... czy to twoje ustrojstwo (aparat fotograficzny? telefon?) nie ma do wyboru jakichś trybów podłączenia do komputera.
Moja Nokia (phone) ma na przykład opcje Nokia suite (gdzie zgłasza sie jako modem) i ma także media storage (zgłasza się jak pendrive czyli partycja). Do zgrania wystarczy jeśli podłączy się jako media storage.
Czy moja krysztalowa kula podpowiedziala poprawnie?
Pozdrawiam
TheAnt
Offline
Ad1. Tak, widział ją bez problemu Lenny.
Ad2. To jest czytnik wbudowany w lapka, wkłada się kartę z boku w związku z tym nie ma możliwości wyboru trybu jak napisał kolega.
lsusb z włożoną kartą:
draculla:/home/michal# lsusb Bus 005 Device 002: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub draculla:/home/michal#
Offline
milik napisał(-a):
Ad1. Tak, widział ją bez problemu Lenny.
Ad2. To jest czytnik wbudowany w lapka, wkłada się kartę z boku w związku z tym nie ma możliwości wyboru trybu jak napisał kolega.
Efekt wykonania udevadm monitor (jak to sugerował jacekalex) wyemigrowal do niebytu. Załacz go jakoś jeszcze raz, tym razem może w bardziej stały sposób.
Znaczy:
1) uruchom udevadm monitor
2) załącz nam wynik działania (to co ci wypisze na ekranie)
milik napisał(-a):
lsusb z włożoną kartą:
To już wiemy, że raczej nie ma czego szukać na usb.
PS:
milik napisał(-a):
Ad1. Tak, widział ją bez problemu Lenny.
Najszybsze rozwiązanie ( w zależności od dostępu do netu): A może by tak wersja Lenny-live CD/DVD, o ile takie jeszcze są i o ile odczytywał go standardowy Lenny.
Pozdrawiam
TheAnt
Ostatnio edytowany przez TheAnt (2012-03-10 11:08:34)
Offline
Pod lsusb jej nie ma.
Pokaż jeszcze
lspci
Pod windowsem działa ten czytnik ? (nie można wykluczyć uszkodzenia)
Offline
Proszę, lspci:
draculla:/home/michal# lspci 00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03) 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03) 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 02) 00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2 (rev 02) 00:1c.2 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 3 (rev 02) 00:1c.3 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 4 (rev 02) 00:1d.0 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 02) 00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 02) 00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02) 00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller (rev 02) 00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 02) 05:00.0 Network controller: Broadcom Corporation BCM4311 802.11b/g WLAN (rev 01) 06:01.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02) 06:04.0 CardBus bridge: ENE Technology Inc CB-712/4 Cardbus Controller (rev 10) 06:04.1 FLASH memory: ENE Technology Inc ENE PCI Memory Stick Card Reader Controller (rev 01) 06:04.2 SD Host controller: ENE Technology Inc ENE PCI Secure Digital Card Reader Controller (rev 01) 06:04.3 FLASH memory: ENE Technology Inc FLASH memory: ENE Technology Inc: (rev 01) 06:04.4 FLASH memory: ENE Technology Inc SD/MMC Card Reader Controller (rev 01) draculla:/home/michal#
Offline
Kod:
......... 06:04.4 FLASH memory: ENE Technology Inc SD/MMC Card Reader Controller (rev 01)
Jest widoczny, i jak widać ma się nieźle.
Radziłbym zobaczyć, czy system załadował do niego jakiś sterownik:
lspci -k | grep -iA3 '06:04.4'
i wyciagnać jego pciid:
lspci -n | grep -i '06:04.4'
Wyniki powyższych poleceń (wykonanych z uprawnieniami użytkownika root) mile widziane ;)
Pozdrawiam
;-)
Offline