Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!

Ogłoszenie

Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.

#1  2008-05-11 15:45:12

  Grzeslaw - Użytkownik

Grzeslaw
Użytkownik
Zarejestrowany: 2008-02-12

Compiz fusion - jak to odpalić?

Witam

Postanowiłem zainstalować sobie compiza fusion, jednak za cholere nie mogę go odpalić. Do instalacji użyłem repoztytorii:

Kod:

deb http://download.tuxfamily.org/shames/debian-etch/desktopfx/stable/ ./

Debianik jest w wersji stabilnej ETCH, kde w wersji 3.5.
Przed instalacją zainstalowałem poprawnie sterowniki NVIDI ze strony producenta oraz dodałem poniższe wpisy do xorga:

Kod:

# W sekcji Device
Option "AddARGBGLXVisuals" "True"
Option "AllowGLXWithComposite" "True"

Section "Extensions"
    Option "Composite" "Enable"
EndSection

Instalacje poczełem od instalacji pakietów dla fusiona-kde, czyli: zainstalowałem compiz-fusion-kde:

Kod:

ii  compiz                            0.6.2-shame-0                        OpenGL window and compositing manager
ii  compiz-bcop                       0.6.0-shame-0                        Compiz option code generator
ii  compiz-core                       0.6.2-shame-0                        OpenGL window and compositing manager
ii  compiz-fusion-kde                 0.6.0                                Metapackage for the compiz fusion project
ii  compiz-fusion-plugins-extra       0.6.0-shame-0                        Collection of Compiz Fusion plugins for Comp
ii  compiz-fusion-plugins-main        0.6.0-shame-0                        Collection of Compiz Fusion plugins for Comp
ii  compiz-fusion-plugins-unsupported 0.6.0-shame-0                        Collection of plugins for Compiz - Unsupport
ii  compiz-kde                        0.6.2-shame-0                        OpenGL window and compositing manager - KDE
ii  compiz-manager                    0.6.0                                Compiz Manager for the compiz fusion project
ii  compiz-plugins                    0.6.2-shame-0                        OpenGL window and compositing manager - plug
ii  compizconfig-backend-kconfig      0.6.0-shame-0                        KDE Backend for the Compiz Configuration Sys
ii  compizconfig-python               0.5.2-shame-0                        Python bindings for the Compiz Configuration
ii  libcompizconfig0                  0.6.0-shame-0                        Settings library for plugins - Compiz Fusion

Jednak nigdzie w menu start ani w konsolce nie mam żadnego softu aby to odpalić. Doczytałem też, że potrzebuje zainstalować pakiet: fusion-icon, jednak nie chce się on za cholere zainstalować:

Kod:

deb1an:~# apt-get install fusion-icon
Reading package lists... Done
Building dependency tree... Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.

Since you only requested a single operation it is extremely likely that
the package is simply not installable and a bug report against
that package should be filed.
The following information may help to resolve the situation:

The following packages have unmet dependencies:
  fusion-icon: Depends: python-gobject but it is not installable
E: Broken packages


# Próba aptitude:
deb1an:~# aptitude install fusion-icon
Reading package lists... Done
Building dependency tree... Done
Reading extended state information
Initializing package states... Done
Reading task descriptions... Done
Building tag database... Done
The following packages are BROKEN:
  fusion-icon
The following NEW packages will be automatically installed:
  python-ctypes
The following NEW packages will be installed:
  python-ctypes
0 packages upgraded, 2 newly installed, 0 to remove and 0 not upgraded.
Need to get 219kB of archives. After unpacking 1028kB will be used.
The following packages have unmet dependencies:
  fusion-icon: Depends: python-gobject which is a virtual package.
Resolving dependencies...
The following actions will resolve these dependencies:

Keep the following packages at their current version:
fusion-icon [Not Installed]

Score is -10001

Accept this solution? [Y/n/q/?]

Co z tym fantem teraz począć ? ;)

Offline

 

#2  2008-05-11 16:39:00

  bns - unknown

bns
unknown
Zarejestrowany: 2005-12-25
Serwis

Re: Compiz fusion - jak to odpalić?

Używać jednego narzędzia do instalowania pakietów. Jak już korzystasz z aptitude, to jego się trzymaj ;)

Co z tym fantem teraz począć ? ;)

Nacisnąć `Y` ? ;) Co zwraca wtedy?


Pozdrawiam,
bns

Offline

 

#3  2008-05-11 17:16:02

  Grzeslaw - Użytkownik

Grzeslaw
Użytkownik
Zarejestrowany: 2008-02-12

Re: Compiz fusion - jak to odpalić?

używam apt-get'a ale z autopsji wiem, że aptitute działa lepiej czasami, aczkolwiek apt mi w zupełności starcza, także przy nim chciałbym zostać.

A jak naciskam Y to nic sie nie dzieje wsumie:

Kod:

deb1an:~# aptitude install fusion-icon
Reading package lists... Done
Building dependency tree... Done
Reading extended state information
Initializing package states... Done
Reading task descriptions... Done
Building tag database... Done
The following packages are BROKEN:
  fusion-icon
The following NEW packages will be automatically installed:
  python-ctypes
The following NEW packages will be installed:
  python-ctypes
0 packages upgraded, 2 newly installed, 0 to remove and 0 not upgraded.
Need to get 219kB of archives. After unpacking 1028kB will be used.
The following packages have unmet dependencies:
  fusion-icon: Depends: python-gobject which is a virtual package.
Resolving dependencies...
The following actions will resolve these dependencies:

Keep the following packages at their current version:
fusion-icon [Not Installed]

Score is -10001

Accept this solution? [Y/n/q/?] y
No packages will be installed, upgraded, or removed.
0 packages upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Need to get 0B of archives. After unpacking 0B will be used.
Do you want to continue? [Y/n/?] y
Writing extended state information... Done
deb1an:~#
deb1an:~# aptitude install fusion-icon
Reading package lists... Done
Building dependency tree... Done
Reading extended state information
Initializing package states... Done
Reading task descriptions... Done
Building tag database... Done
The following packages are BROKEN:
  fusion-icon
The following NEW packages will be automatically installed:
  python-ctypes
The following NEW packages will be installed:
  python-ctypes
0 packages upgraded, 2 newly installed, 0 to remove and 0 not upgraded.
Need to get 219kB of archives. After unpacking 1028kB will be used.
The following packages have unmet dependencies:
  fusion-icon: Depends: python-gobject which is a virtual package.
Resolving dependencies...
The following actions will resolve these dependencies:

Keep the following packages at their current version:
fusion-icon [Not Installed]

Score is -10001

Accept this solution? [Y/n/q/?]

także niestety nie pomaga i nic nie robi ;/

Offline

 

#4  2008-05-11 17:28:33

  bns - unknown

bns
unknown
Zarejestrowany: 2005-12-25
Serwis

Re: Compiz fusion - jak to odpalić?

Spróbuj usunąć z /var/cache/apt/archives paczkę fusion-icon i po tym sprobować `aptitude update` i zainstalować. Mieszasz dystrybucje ?
Co się stanie jeśli z palca przez dpkg -i zainstalujesz `python-ctypes`, wcześniej ściągnięte ze strony? http://packages.debian.org/search?suite=default& … python-ctypes

Ostatnio edytowany przez bns (2008-05-11 17:29:13)


Pozdrawiam,
bns

Offline

 

#5  2008-05-11 18:06:48

  Grzeslaw - Użytkownik

Grzeslaw
Użytkownik
Zarejestrowany: 2008-02-12

Re: Compiz fusion - jak to odpalić?

w /var/cache/apt/archives/ nie mam pakietu fusion-icon takze nie mialem co usunąć. A paczke ściągnałem i zainstalowałem, jednak cały czas nie moge zainstalować fusion-icon.

Kod:

deb1an:/usr/src#
deb1an:/usr/src# aptitude  install fusion-icon
Reading package lists... Done
Building dependency tree... Done
Reading extended state information
Initializing package states... Done
Writing extended state information... Done
Reading task descriptions... Done
Building tag database... Done
The following packages are BROKEN:
  fusion-icon
0 packages upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 23.1kB of archives. After unpacking 209kB will be used.
The following packages have unmet dependencies:
  fusion-icon: Depends: python-gobject which is a virtual package.
Resolving dependencies...
Unable to resolve dependencies!  Giving up...
Abort.
deb1an:/usr/src#

Spróbowałem też z palca zainstalować fusion-icon, i wywala:

Kod:

deb1an:/usr/src# dpkg -i fusion-icon_0.1.1-shame-0_i386.deb
Selecting previously deselected package fusion-icon.
(Reading database ... 66962 files and directories currently installed.)
Unpacking fusion-icon (from fusion-icon_0.1.1-shame-0_i386.deb) ...
dpkg: dependency problems prevent configuration of fusion-icon:
 fusion-icon depends on python-gobject; however:
  Package python-gobject is not installed.
dpkg: error processing fusion-icon (--install):
 dependency problems - leaving unconfigured
Errors were encountered while processing:
 fusion-icon
deb1an:/usr/src#

Offline

 

#6  2008-05-13 08:38:19

  Grzeslaw - Użytkownik

Grzeslaw
Użytkownik
Zarejestrowany: 2008-02-12

Re: Compiz fusion - jak to odpalić?

Jak nie wiecie jak to rozwiązać, to może kompilacja ze źródeł, by
przyniosła pożądany efekt? Może macie jakieś sprawdzone przepisy; linki?
Albo inne repozytoria cmpiza do etcha?

Offline

 

#7  2008-05-13 09:54:32

  guzzi - Członek DUG

guzzi
Członek DUG
Skąd: Asteroida Linux
Zarejestrowany: 2005-03-31

Re: Compiz fusion - jak to odpalić?

Offline

 

#8  2008-05-13 21:53:24

  Grzeslaw - Użytkownik

Grzeslaw
Użytkownik
Zarejestrowany: 2008-02-12

Re: Compiz fusion - jak to odpalić?

Ten link z redkiem nie jest chyba za dobry, bo mam nvidie, a pozatym nie opisuje kompilacji i nie rozwiązuje problemy z ikonami.

Natomaist ten drugi link, też już kiedyś przeglądałem. Jednak w tamtych repo wywalami:

Kod:

deb1an:/home/grzeslaw#
deb1an:/home/grzeslaw# apt-get install compiz-bcop compizconfig-settings-manager compiz-core compiz-fusion-plugins-extra compiz-fusion-plugins-main compiz-fusion-plugins-unstable compiz-fusion-plugins-unsupported compiz-plugins emerald fusion-icon emerald-themes libcompizconfig0 libdecoration0 python-compizconfig
Reading package lists... Done
Building dependency tree... Done
Package compiz-bcop is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source
However the following packages replace it:
  compiz-fusion-bcop
E: Package compiz-bcop has no installation candidate
deb1an:/home/grzeslaw# apt-get install compiz-fusion-bcop compizconfig-settings-manager compiz-core compiz-fusion-plugins-extra compiz-fusion-plugins-main compiz-fusion-plugins-unstable compiz-fusion-plugins-unsupported compiz-plugins emerald fusion-icon emerald-themes libcompizconfig0 libdecoration0 python-compizconfig
Reading package lists... Done
Building dependency tree... Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:

The following packages have unmet dependencies:
  compiz-core: Depends: libc6 (>= 2.7-1) but 2.3.6.ds1-13etch5 is to be installed
               Depends: libxdamage1 (>= 1:1.1) but 1:1.0.3-3 is to be installed
               Depends: libxrandr2 (>= 2:1.2.0) but 2:1.1.0.2-5 is to be installed
  compiz-fusion-plugins-extra: Depends: libatk1.0-0 (>= 1.20.0) but 1.12.4-3 is to be installed
                               Depends: libc6 (>= 2.7-1) but 2.3.6.ds1-13etch5 is to be installed
                               Depends: libdbus-glib-1-2 (>= 0.74) but 0.71-3 is to be installed
                               Depends: libgtk2.0-0 (>= 2.12.0) but 2.8.20-7 is to be installed
                               Depends: libnotify1 (>= 0.4.4) but it is not going to be installed
                               Depends: libnotify1-gtk2.10 but it is not installable
                               Depends: libpango1.0-0 (>= 1.20.2) but 1.14.8-5 is to be installed
                               Depends: libxdamage1 (>= 1:1.1) but 1:1.0.3-3 is to be installed
                               Depends: libxrandr2 (>= 2:1.2.0) but 2:1.1.0.2-5 is to be installed
  compiz-fusion-plugins-main: Depends: libc6 (>= 2.7-1) but 2.3.6.ds1-13etch5 is to be installed
                              Depends: libpango1.0-0 (>= 1.20.2) but 1.14.8-5 is to be installed
                              Depends: libxdamage1 (>= 1:1.1) but 1:1.0.3-3 is to be installed
                              Depends: libxrandr2 (>= 2:1.2.0) but 2:1.1.0.2-5 is to be installed
  compiz-fusion-plugins-unsupported: Depends: libc6 (>= 2.7-1) but 2.3.6.ds1-13etch5 is to be installed
                                     Depends: libxdamage1 (>= 1:1.1) but 1:1.0.3-3 is to be installed
                                     Depends: libxrandr2 (>= 2:1.2.0) but 2:1.1.0.2-5 is to be installed
  compiz-plugins: Depends: libc6 (>= 2.7-1) but 2.3.6.ds1-13etch5 is to be installed
                  Depends: libfuse2 (>= 2.6) but it is not going to be installed
                  Depends: libgtk2.0-0 (>= 2.12.0) but 2.8.20-7 is to be installed
                  Depends: librsvg2-2 (>= 2.18.1) but 2.14.4-3 is to be installed
  emerald: Depends: libatk1.0-0 (>= 1.20.0) but 1.12.4-3 is to be installed
           Depends: libc6 (>= 2.7-1) but 2.3.6.ds1-13etch5 is to be installed
           Depends: libemeraldengine0 but it is not going to be installed
           Depends: libgtk2.0-0 (>= 2.12.0) but 2.8.20-7 is to be installed
           Depends: libpango1.0-0 (>= 1.20.2) but 1.14.8-5 is to be installed
           Depends: libwnck22 (>= 2.22.0) but it is not installable
  fusion-icon: Depends: compiz-kde (>= 0.7.3) but it is not going to be installed or
                        compiz-gnome (>= 0.7.3) but it is not going to be installed
  libcompizconfig0: Depends: libc6 (>= 2.7-1) but 2.3.6.ds1-13etch5 is to be installed
  libdecoration0: Depends: libc6 (>= 2.7-1) but 2.3.6.ds1-13etch5 is to be installed
  python-compizconfig: Depends: libc6 (>= 2.7-1) but 2.3.6.ds1-13etch5 is to be installed
                       Depends: libxdamage1 (>= 1:1.1) but 1:1.0.3-3 is to be installed
                       Depends: libxrandr2 (>= 2:1.2.0) but 2:1.1.0.2-5 is to be installed
                       Depends: python (>= 2.5) but 2.4.4-2 is to be installed
                       Depends: python-support (>= 0.7.1) but 0.5.6 is to be installed
E: Broken packages
deb1an:/home/grzeslaw#

Pewnie dlatego że żródła są dla SIDA.

Offline

 

#9  2008-05-14 23:51:37

  Grzeslaw - Użytkownik

Grzeslaw
Użytkownik
Zarejestrowany: 2008-02-12

Re: Compiz fusion - jak to odpalić?

dobra. Troszke się wkurzyłem bo przegooglałem sporo, popytałem tu i tam (nawet na forum compiza), i ciągle nic. W zw. z czym podjełem decyzje o updacie to SIDA. Compiza zainstalowałem zgodnie z: http://debian.linux.pl/viewtopic.php?t=2720&pos … c&start=0

No i wszystko niby gut, ale gdy odpalam compiza z fusion-icon, to znika mi obramowanie okien, i nic nie mogę kliknąć :(
Zrobiłem compiz-checka,i oto co pokazał:

Kod:

grzeslaw@deb1an:~$ compiz-check

Gathering information about your system...

/usr/bin/compiz-check: line 114: [: Debian: binary operator expected
 Distribution:          Debian GNU/Linux (lenny/sid)
 Desktop environment:   KDE
 Graphics chip:         nVidia Corporation G72M [Quadro NVS 110M/GeForce Go 7300] (rev a1)
 Driver in use:         nvidia
 Rendering method:      Nvidia

Checking if it's possible to run Compiz on your system...

 Checking for texture_from_pixmap...               [ OK ]
 Checking for non power of two support...          [ OK ]
 Checking for composite extension...               [ OK ]
 Checking for FBConfig...                          [ OK ]
 Checking for hardware/setup problems...           [ OK ]

grzeslaw@deb1an:~$ glxinfo | grep direct
direct rendering: Yes
grzeslaw@deb1an:~$ fusion-icon
 * Detected Session: kde
 * Searching for installed applications...
 * NVIDIA on Xorg detected, exporting: __GL_YIELD=NOTHING
 * Using the GTK Interface
 * KWin is already running
 * Setting window manager to Compiz
 ... executing: compiz.real --replace --sm-disable --ignore-desktop-hints ccp
compiz.real (core) - Error: Another window manager is already running on screen: 0
compiz.real (core) - Fatal: No manageable screens found on display :0
 * Setting window manager to KWin


Traceback (most recent call last):
  File "/usr/bin/fusion-icon", line 58, in <module>
    choose_interface(try_first=options.interface)
  File "usr/lib/python2.5/site-packages/FusionIcon/interface.py", line 89, in choose_interface
  File "usr/lib/python2.5/site-packages/FusionIcon/interface.py", line 35, in import_interface
  File "usr/lib/python2.5/site-packages/FusionIcon/interface_gtk/__init__.py", line 3, in <module>
  File "usr/lib/python2.5/site-packages/FusionIcon/interface_gtk/main.py", line 214, in <module>
KeyboardInterrupt
grzeslaw@deb1an:~$
grzeslaw@deb1an:~$

No i na koniec odpaliłem z konsoli fusion-icom -obramowań brak, i po CTRL+C takie goś wywaliło. Macie jakiś pomysł co z tym dalej?
BTW: Na mojej poprzedniej instalacji debiana (sid) również miałem identyczny problem, brak obramowania okien.

Ostatnio edytowany przez Grzeslaw (2008-05-15 00:23:56)

Offline

 

#10  2008-05-24 00:19:02

  Grzeslaw - Użytkownik

Grzeslaw
Użytkownik
Zarejestrowany: 2008-02-12

Re: Compiz fusion - jak to odpalić?

Zainstalowałem ubuntu, compiz śmiga, lata  już w defaulcie, a debianowe drzewo zachowane - także jest to pewien kompromiz ;)

Pozdr.

Offline

 

Stopka forum

Powered by PunBB
© Copyright 2002–2005 Rickard Andersson
Możesz wyłączyć AdBlock — tu nie ma reklam ;-)