Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!
Ogłoszenie
Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.
#1 2008-04-04 14:52:33
ukasz - 
Użytkownik
- ukasz
- Użytkownik
- Skąd: wroclaw
- Zarejestrowany: 2006-06-21
zdegradowana maciez po reboocie.
witam
mam 2 macierze raid 1. zrobione z tych samych dyskow i tak samo spartycjonowane.
zawsze po reboocie robi sie cos takiego:
Kod:
Personalities : [raid1] [raid6] [raid5] [raid4]
md3 : active raid5 sda1[0] sdb1[1]
976767872 blocks level 5, 64k chunk, algorithm 2 [3/2] [UU_]
md2 : active raid1 hdc2[1]
18505792 blocks [2/1] [_U]
md1 : active raid1 hdc1[1]
976640 blocks [2/1] [_U]
unused devices: <none>jak zrobilem macierz:
mialem zinstalowany system na zwyklym dysku. pozniej kupilem nowy taki sam. zrobilem nowa macierz z jednym device missing. rebootnalem zeby sie system odpalil z macierzy 1 dyskowej. dodalem stary dysk i......
no wlasnie powinno sie odpalac juz z 2 dyskami.
robilem dpkg-reconfigure-`uname -r`
nic nie dalo
robilem dpkg-reconfigure mdadm
nic nie dalo
plik mdadm.conf:
Kod:
DEVICE /dev/sd* /dev/hd* # auto-create devices with Debian standard permissions CREATE owner=root group=disk mode=0660 auto=yes # automatically tag new arrays as belonging to the local system HOMEHOST <system> # instruct the monitoring daemon where to send mail alerts MAILADDR root # definitions of existing MD arrays # This file was auto-generated on Mon, 19 Nov 2007 00:39:53 +0100 # by mkconf $Id: mkconf 261 2006-11-09 13:32:35Z madduck $ ARRAY /dev/md1 level=raid1 num-devices=2 UUID=df09b19d:5d08a9bc:2147d748:71e611cf devices=/dev/hda1,/dev/hdc1 ARRAY /dev/md2 level=raid1 num-devices=2 UUID=78c56950:0950eb60:cd4a509e:8cb9d740 devices=/dev/hda2,/dev/hdc2 ARRAY /dev/md3 level=raid5 num-devices=3 UUID=9f78e581:2eb9a77e:cd4a509e:8cb9d740 devices=/dev/sd[abc]1
plik /boot/grub/menu.lst
Kod:
# menu.lst - See: grub(8), info grub, update-grub(8) # grub-install(8), grub-floppy(8), # grub-md5-crypt, /usr/share/doc/grub # and /usr/share/doc/grub-doc/. ## default num # Set the default entry to the entry number NUM. Numbering starts from 0, and # the entry number 0 is the default if the command is not used. # # You can specify 'saved' instead of a number. In this case, the default entry # is the entry saved with the command 'savedefault'. # WARNING: If you are using dmraid do not change this entry to 'saved' or your # array will desync and will not let you boot your system. default 0 ## timeout sec # Set a timeout, in SEC seconds, before automatically booting the default entry # (normally the first entry defined). timeout 5 # Pretty colours color cyan/blue white/blue ## password ['--md5'] passwd # If used in the first section of a menu file, disable all interactive editing # control (menu entry editor and command-line) and entries protected by the # command 'lock' # e.g. password topsecret # password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/ # password topsecret # # examples # # title Windows 95/98/NT/2000 # root (hd0,0) # makeactive # chainloader +1 # # title Linux # root (hd0,1) # kernel /vmlinuz root=/dev/hda2 ro # # # Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST ### BEGIN AUTOMAGIC KERNELS LIST ## lines between the AUTOMAGIC KERNELS LIST markers will be modified ## by the debian update-grub script except for the default options below ## DO NOT UNCOMMENT THEM, Just edit them to your needs ## ## Start Default Options ## ## default kernel options ## default kernel options for automagic boot options ## If you want special options for specific kernels use kopt_x_y_z ## where x.y.z is kernel version. Minor versions can be omitted. ## e.g. kopt=root=/dev/hda1 ro ## kopt_2_6_8=root=/dev/hdc1 ro ## kopt_2_6_8_2_686=root=/dev/hdc2 ro # kopt=root=/dev/md2 ro ## default grub root device ## e.g. groot=(hd0,0) # groot=(hd0,1) ## should update-grub create alternative automagic boot options ## e.g. alternative=true ## alternative=false # alternative=true ## should update-grub lock alternative automagic boot options ## e.g. lockalternative=true ## lockalternative=false # lockalternative=false ## additional options to use with the default boot option, but not with the ## alternatives ## e.g. defoptions=vga=791 resume=/dev/hda5 # defoptions= ## should update-grub lock old automagic boot options ## e.g. lockold=false ## lockold=true # lockold=false ## Xen hypervisor options to use with the default Xen boot option # xenhopt= ## Xen Linux kernel options to use with the default Xen boot option # xenkopt=console=tty0 ## altoption boot targets option ## multiple altoptions lines are allowed ## e.g. altoptions=(extra menu suffix) extra boot options ## altoptions=(single-user) single # altoptions=(single-user mode) single ## controls how many kernels should be put into the menu.lst ## only counts the first occurence of a kernel, not the ## alternative kernel options ## e.g. howmany=all ## howmany=7 # howmany=all ## should update-grub create memtest86 boot option ## e.g. memtest86=true ## memtest86=false # memtest86=true ## should update-grub adjust the value of the default booted system ## can be true or false # updatedefaultentry=false ## ## End Default Options ## title Debian GNU/Linux, kernel 2.6.18 root (hd0,1) kernel /boot/vmlinuz-2.6.18 root=/dev/md2 ro initrd /boot/initrd.img-2.6.18 savedefault title Debian GNU/Linux, kernel 2.6.18 (single-user mode) root (hd0,1) kernel /boot/vmlinuz-2.6.18 root=/dev/md2 ro single initrd /boot/initrd.img-2.6.18 savedefault title Debian GNU/Linux, kernel 2.6.18-4-686 root (hd0,1) kernel /boot/vmlinuz-2.6.18-4-686 root=/dev/md2 ro initrd /boot/initrd.img-2.6.18-4-686 savedefault title Debian GNU/Linux, kernel 2.6.18-4-686 (single-user mode) root (hd0,1) kernel /boot/vmlinuz-2.6.18-4-686 root=/dev/md2 ro single initrd /boot/initrd.img-2.6.18-4-686 savedefault ### END DEBIAN AUTOMAGIC KERNELS LIST
plik /boot/grub/device.map
Kod:
(hd0) /dev/hda (hd1) /dev/hdc
Offline
#2 2008-04-05 00:15:28
bercik - Moderator Mamut
Re: zdegradowana maciez po reboocie.
jezeli masz plik /var/lib/mdadm/CONF-UNCHECKED ... sproboj:
Kod:
rm -f /var/lib/mdadm/CONF-UNCHECKED update-initramfs -u -k all
szczegoly w /usr/share/doc/mdadm/README.upgrading-2.5.3.gz
"Wszyscy wiedzą, że czegoś zrobić nie można. Ale przypadkowo znajduje się jakiś nieuk, który tego nie wie. I on właśnie robi odkrycie." (A.Einstein)
Offline
#3 2008-04-05 00:34:02
ukasz - Użytkownik
- ukasz
- Użytkownik
- Skąd: wroclaw
- Zarejestrowany: 2006-06-21
Re: zdegradowana maciez po reboocie.
zrobilem cos innego.
Kod:
mdadm --zero-superblock /dev/hda1 i 2
no i jakims cudem zadzialalo. zobaczymu na jak dlugo.
btw.
teraz mecze sie z inna macieza. raid 5
jak sie uruchamia komp to wstaja 2 z 3 dyskow. jak dodam 3 do maciezy recznie to zalapie. ale po jakims czasie zaznacza dysk ze jest faulty.
czasami wykryje ten dysk a czasami nie. hyba moja plyta glowna juz zdycha.
no i nie wiem co jest grane. czy moja plyta wariuje czy za cienki zasilacz. czy dysk zwalony.
objawia sie to w ten sposob ze dysk sie wylacza i powraca za jakies 3 sekundy.
z pozostalymi 2 dyskami jest wszystko ok
smart pokauje ze wszystko jest ok
oto co mi sie pokazuje na konsoli poczawszy od moment zsynchronizowana maciezy
Kod:
Apr 5 15:45:54 serwer kernel: md: md3: sync done. Apr 5 15:45:54 serwer kernel: RAID5 conf printout: Apr 5 15:45:54 serwer kernel: --- rd:3 wd:3 fd:0 Apr 5 15:45:54 serwer kernel: disk 0, o:1, dev:sda1 Apr 5 15:45:54 serwer kernel: disk 1, o:1, dev:sdc1 Apr 5 15:45:54 serwer kernel: disk 2, o:1, dev:sdb1 Apr 5 15:48:25 serwer uptimed: moving up to position 4: 0 days, 02:21:25 Apr 5 16:09:01 serwer -- MARK -- Apr 5 16:29:01 serwer -- MARK -- Apr 5 16:49:01 serwer -- MARK -- Apr 5 17:09:01 serwer -- MARK -- Apr 5 17:22:44 serwer kernel: ata3: port is slow to respond, please be patient Apr 5 17:23:07 serwer kernel: ata3: soft resetting port Apr 5 17:23:14 serwer kernel: ata3: port is slow to respond, please be patient Apr 5 17:23:14 serwer kernel: ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Apr 5 17:23:14 serwer kernel: ata3.00: configured for UDMA/133 Apr 5 17:23:14 serwer kernel: ata3: EH complete Apr 5 17:23:14 serwer kernel: SCSI device sdb: 976773168 512-byte hdwr sectors (500108 MB) Apr 5 17:23:15 serwer kernel: sdb: Write Protect is off Apr 5 17:23:15 serwer kernel: SCSI device sdb: drive cache: write back Apr 5 17:23:53 serwer kernel: ata3: port is slow to respond, please be patient Apr 5 17:24:16 serwer kernel: ata3: soft resetting port Apr 5 17:24:24 serwer kernel: ata3: port is slow to respond, please be patient Apr 5 17:24:24 serwer kernel: ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Apr 5 17:24:24 serwer kernel: ata3.00: configured for UDMA/133 Apr 5 17:24:24 serwer kernel: ata3: EH complete Apr 5 17:24:24 serwer kernel: SCSI device sdb: 976773168 512-byte hdwr sectors (500108 MB) Apr 5 17:24:24 serwer kernel: sdb: Write Protect is off Apr 5 17:24:24 serwer kernel: SCSI device sdb: drive cache: write back Apr 5 17:49:01 serwer -- MARK -- Apr 5 17:52:15 serwer kernel: ata3: port is slow to respond, please be patient Apr 5 17:52:25 serwer kernel: ata3: soft resetting port Apr 5 17:52:25 serwer kernel: ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Apr 5 17:52:25 serwer kernel: ata3.00: configured for UDMA/133 Apr 5 17:52:25 serwer kernel: ata3: EH complete Apr 5 17:52:25 serwer kernel: SCSI device sdb: 976773168 512-byte hdwr sectors (500108 MB) Apr 5 17:52:25 serwer kernel: sdb: Write Protect is off Apr 5 17:52:25 serwer kernel: SCSI device sdb: drive cache: write back Apr 5 18:09:01 serwer -- MARK -- Apr 5 18:29:01 serwer -- MARK -- Apr 5 18:49:02 serwer -- MARK -- Apr 5 19:09:02 serwer -- MARK -- Apr 5 19:29:02 serwer -- MARK -- Apr 5 19:49:02 serwer -- MARK -- Apr 5 20:09:02 serwer -- MARK -- Apr 5 20:20:56 serwer kernel: ata3: soft resetting port Apr 5 20:20:56 serwer kernel: ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Apr 5 20:20:56 serwer kernel: ata3.00: configured for UDMA/133 Apr 5 20:20:56 serwer kernel: ata3: EH pending after completion, repeating EH ( cnt=4) Apr 5 20:20:56 serwer kernel: ata3: EH complete Apr 5 20:20:56 serwer kernel: SCSI device sdb: 976773168 512-byte hdwr sectors (500108 MB) Apr 5 20:20:56 serwer kernel: sdb: Write Protect is off Apr 5 20:20:56 serwer kernel: SCSI device sdb: drive cache: write back Apr 5 20:26:18 serwer kernel: device eth0 entered promiscuous mode Apr 5 20:26:18 serwer kernel: audit(1207419978.925:2): dev=eth0 prom=256 old_pr om=0 auid=4294967295 Apr 5 20:26:18 serwer kernel: device eth0 left promiscuous mode Apr 5 20:26:18 serwer kernel: audit(1207419978.927:3): dev=eth0 prom=0 old_prom =256 auid=4294967295 Apr 5 20:27:42 serwer kernel: device eth0 entered promiscuous mode Apr 5 20:27:42 serwer kernel: audit(1207420062.954:4): dev=eth0 prom=256 old_pr om=0 auid=4294967295 Apr 5 20:27:42 serwer kernel: device eth0 left promiscuous mode Apr 5 20:27:42 serwer kernel: audit(1207420062.956:5): dev=eth0 prom=0 old_prom =256 auid=4294967295 Apr 5 20:27:46 serwer kernel: device eth0 entered promiscuous mode Apr 5 20:27:46 serwer kernel: audit(1207420066.133:6): dev=eth0 prom=256 old_pr om=0 auid=4294967295 Apr 5 20:27:46 serwer kernel: device eth0 left promiscuous mode Apr 5 20:27:46 serwer kernel: audit(1207420066.136:7): dev=eth0 prom=0 old_prom =256 auid=4294967295 Apr 5 20:29:34 serwer kernel: device eth0 entered promiscuous mode Apr 5 20:29:34 serwer kernel: audit(1207420174.210:8): dev=eth0 prom=256 old_pr om=0 auid=4294967295 Apr 5 20:29:38 serwer kernel: device eth0 left promiscuous mode Apr 5 20:29:38 serwer kernel: audit(1207420178.109:9): dev=eth0 prom=0 old_prom =256 auid=4294967295 Apr 5 20:36:13 serwer kernel: ata3: soft resetting port Apr 5 20:36:13 serwer kernel: ata3: SATA link down (SStatus 0 SControl 300) Apr 5 20:36:13 serwer kernel: ata3: failed to recover some devices, retrying in 5 secs Apr 5 20:36:18 serwer kernel: ata3: hard resetting port Apr 5 20:36:26 serwer kernel: ata3: port is slow to respond, please be patient Apr 5 20:36:49 serwer kernel: ata3: hardreset failed, retrying in 5 secs Apr 5 20:36:54 serwer kernel: ata3: hard resetting port Apr 5 20:37:01 serwer kernel: ata3: port is slow to respond, please be patient Apr 5 20:37:24 serwer kernel: ata3: hardreset failed, retrying in 5 secs Apr 5 20:37:29 serwer kernel: ata3: hard resetting port Apr 5 20:37:37 serwer kernel: ata3: port is slow to respond, please be patient Apr 5 20:38:00 serwer kernel: ata3.00: disabled Apr 5 20:38:00 serwer kernel: ata3: EH pending after completion, repeating EH ( cnt=4) Apr 5 20:38:00 serwer kernel: sd 2:0:0:0: SCSI error: return code = 0x00010000 Apr 5 20:38:00 serwer kernel: end_request: I/O error, dev sdb, sector 138811727 Apr 5 20:38:00 serwer kernel: RAID5 conf printout: Apr 5 20:38:00 serwer kernel: --- rd:3 wd:2 fd:1 Apr 5 20:38:00 serwer kernel: disk 0, o:1, dev:sda1 Apr 5 20:38:00 serwer kernel: disk 1, o:1, dev:sdc1 Apr 5 20:38:00 serwer kernel: disk 2, o:0, dev:sdb1 Apr 5 20:38:00 serwer kernel: RAID5 conf printout: Apr 5 20:38:00 serwer kernel: --- rd:3 wd:2 fd:1 Apr 5 20:38:00 serwer kernel: disk 0, o:1, dev:sda1 Apr 5 20:38:00 serwer kernel: disk 1, o:1, dev:sdc1 Apr 5 20:38:08 serwer kernel: ata3: port is slow to respond, please be patient Apr 5 20:38:31 serwer kernel: ata3: soft resetting port Apr 5 20:38:38 serwer kernel: ata3: port is slow to respond, please be patient Apr 5 20:39:01 serwer kernel: ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Apr 5 20:39:01 serwer kernel: ata3: EH pending after completion, repeating EH ( cnt=3) Apr 5 20:39:01 serwer kernel: ata3: EH complete Apr 5 20:39:01 serwer kernel: ata3.00: detaching (SCSI 2:0:0:0) Apr 5 20:43:22 serwer kernel: ata3: soft resetting port Apr 5 20:43:22 serwer kernel: ata3: SATA link down (SStatus 0 SControl 300) Apr 5 20:43:22 serwer kernel: ata3: EH complete Apr 5 20:43:41 serwer kernel: ata3: port is slow to respond, please be patient Apr 5 20:43:43 serwer kernel: ata3: soft resetting port Apr 5 20:43:43 serwer kernel: ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Apr 5 20:43:43 serwer kernel: ata3.00: ATA-8, max UDMA7, 976773168 sectors: LBA 48 NCQ (depth 0/32) Apr 5 20:43:43 serwer kernel: ata3.00: configured for UDMA/133 Apr 5 20:43:43 serwer kernel: ata3: EH complete Apr 5 20:43:43 serwer kernel: Vendor: ATA Model: SAMSUNG HD501LJ Rev: CR10 Apr 5 20:43:43 serwer kernel: Type: Direct-Access ANSI SCSI revision: 05 Apr 5 20:43:43 serwer kernel: SCSI device sdd: 976773168 512-byte hdwr sectors (500108 MB) Apr 5 20:43:43 serwer kernel: sdd: Write Protect is off Apr 5 20:43:43 serwer kernel: SCSI device sdd: drive cache: write back Apr 5 20:43:43 serwer kernel: SCSI device sdd: 976773168 512-byte hdwr sectors (500108 MB) Apr 5 20:43:43 serwer kernel: sdd: Write Protect is off Apr 5 20:43:43 serwer kernel: SCSI device sdd: drive cache: write back Apr 5 20:43:43 serwer kernel: sdd: sdd1 Apr 5 20:43:43 serwer kernel: sd 2:0:0:0: Attached scsi disk sdd Apr 5 20:44:08 serwer kernel: ata3: soft resetting port Apr 5 20:44:08 serwer kernel: ata3: SATA link down (SStatus 0 SControl 300) Apr 5 20:44:08 serwer kernel: ata3: failed to recover some devices, retrying in 5 secs Apr 5 20:44:13 serwer kernel: ata3: hard resetting port Apr 5 20:44:14 serwer kernel: ata3: SATA link down (SStatus 0 SControl 300) Apr 5 20:44:14 serwer kernel: ata3: failed to recover some devices, retrying in 5 secs Apr 5 20:44:19 serwer kernel: ata3: hard resetting port Apr 5 20:44:19 serwer kernel: ata3: SATA link down (SStatus 0 SControl 300) Apr 5 20:44:19 serwer kernel: ata3.00: disabled Apr 5 20:44:20 serwer kernel: ata3: EH complete Apr 5 20:44:20 serwer kernel: ata3.00: detaching (SCSI 2:0:0:0) Apr 5 20:44:33 serwer kernel: ata3: port is slow to respond, please be patient Apr 5 20:44:55 serwer kernel: ata3: soft resetting port Apr 5 20:44:56 serwer kernel: ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Apr 5 20:44:56 serwer kernel: ata3.00: ATA-8, max UDMA7, 976773168 sectors: LBA 48 NCQ (depth 0/32) Apr 5 20:44:56 serwer kernel: ata3.00: configured for UDMA/133 Apr 5 20:44:56 serwer kernel: ata3: EH complete Apr 5 20:44:56 serwer kernel: Vendor: ATA Model: SAMSUNG HD501LJ Rev: CR10 Apr 5 20:44:56 serwer kernel: Type: Direct-Access ANSI SCSI revision: 05 Apr 5 20:44:56 serwer kernel: SCSI device sdd: 976773168 512-byte hdwr sectors (500108 MB) Apr 5 20:44:56 serwer kernel: sdd: Write Protect is off Apr 5 20:44:56 serwer kernel: SCSI device sdd: drive cache: write back Apr 5 20:44:56 serwer kernel: SCSI device sdd: 976773168 512-byte hdwr sectors (500108 MB) Apr 5 20:44:56 serwer kernel: sdd: Write Protect is off Apr 5 20:44:56 serwer kernel: SCSI device sdd: drive cache: write back Apr 5 20:44:56 serwer kernel: sdd: sdd1 Apr 5 20:44:56 serwer kernel: sd 2:0:0:0: Attached scsi disk sdd Apr 5 20:49:34 serwer kernel: ata3: soft resetting port Apr 5 20:49:34 serwer kernel: ata3: SATA link down (SStatus 0 SControl 300) Apr 5 20:49:34 serwer kernel: ata3: failed to recover some devices, retrying in 5 secs Apr 5 20:49:39 serwer kernel: ata3: hard resetting port Apr 5 20:49:39 serwer kernel: ata3: SATA link down (SStatus 0 SControl 300) Apr 5 20:49:39 serwer kernel: ata3: failed to recover some devices, retrying in 5 secs Apr 5 20:49:44 serwer kernel: ata3: hard resetting port Apr 5 20:49:45 serwer kernel: ata3: SATA link down (SStatus 0 SControl 300) Apr 5 20:49:45 serwer kernel: ata3.00: disabled Apr 5 20:49:46 serwer kernel: ata3: EH complete Apr 5 20:49:46 serwer kernel: ata3.00: detaching (SCSI 2:0:0:0) Apr 5 21:09:02 serwer -- MARK --
Ostatnio edytowany przez ukasz (2008-04-05 21:48:39)
Offline