Forum Debian Users Gang

kbuildsycoca running...
lord@debian:~$ (K3bDevice::HalConnection) initializing HAL >= 0.5
Mapping udi /org/freedesktop/Hal/devices/storage_model_DVD_A__DH20A3H to device /dev/scd0
/dev/scd0 resolved to /dev/scd0
/dev/scd0 is block device (0)
/dev/scd0 seems to be cdrom
bus: 1, id: 0, lun: 0
(K3bDevice::Device) /dev/scd0: init()
(K3bDevice::Device) /dev/scd0 feature: CD Mastering
(K3bDevice::Device) /dev/scd0 feature: CD Track At Once
(K3bDevice::Device) /dev/scd0 feature: CD-RW Media Write Support
(K3bDevice::Device) /dev/scd0 feature: DVD Read (MMC5)
(K3bDevice::Device) /dev/scd0 feature: DVD+R
(K3bDevice::Device) /dev/scd0 feature: DVD+RW
(K3bDevice::Device) /dev/scd0 feature: DVD+R Double Layer
(K3bDevice::Device) /dev/scd0 feature: DVD-R/-RW Write
(K3bDevice::Device) /dev/scd0 feature: Rigid Restricted Overwrite
(K3bDevice::Device) /dev/scd0 feature: Layer Jump Recording
(K3bDevice::Device) /dev/scd0 unknown profile: 2
(K3bDevice::Device) /dev/scd0: dataLen: 60
(K3bDevice::Device) /dev/scd0: checking for TAO
(K3bDevice::Device) /dev/scd0: checking for SAO
(K3bDevice::Device) /dev/scd0: checking for SAO_R96P
(K3bDevice::Device) /dev/scd0: checking for SAO_R96R
(K3bDevice::Device) /dev/scd0: checking for RAW_R16
(K3bDevice::Device) /dev/scd0: checking for RAW_R96P
(K3bDevice::Device) /dev/scd0: checking for RAW_R96R
(K3bDevice::DeviceManager) setting current write speed of device /dev/scd0 to 2823
Could not resolve /dev/hdc
/dev/hdc resolved to /dev/hdc
(K3bDevice::Device) could not open device /dev/hdc for reading
                    (Nie ma takiego pliku ani katalogu)
could not open device /dev/hdc (Nie ma takiego pliku ani katalogu)
/dev/scd0 resolved to /dev/scd0
(K3bDevice::DeviceManager) dev /dev/scd0 already found
(K3bDevice::DeviceManager) found config entry for devicetype: ATAPI DVD A  DH20A3H
Devices:
------------------------------
Blockdevice:    /dev/scd0
Generic device: 
Vendor:         ATAPI
Description:    DVD A  DH20A3H
Version:        YP5Y
Write speed:    8400
Profiles:       DVD-ROM, DVD-R Sequential, DVD-R Dual Layer Sequential, DVD-R Dual Layer Jump, DVD-RAM, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW
Read Cap:       DVD-ROM, DVD-R, DVD-R Sequential, DVD-R Dual Layer, DVD-R Dual Layer Sequential, DVD-R Dual Layer Jump, DVD-RW, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+RW Dual Layer, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW
Write Cap:      DVD-R, DVD-R Sequential, DVD-R Dual Layer, DVD-R Dual Layer Sequential, DVD-R Dual Layer Jump, DVD-RW, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-R, CD-RW
Writing modes:  SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Restricted Overwrite, Layer Jump
Reader aliases: /dev/scd0
------------------------------
   0 - 01001111 - 79
   1 - 00111011 - 59
   2 - 01001010 - 74
/dev/scd0: ATIP capacity: 79:57:74
(K3bDevice::Device) READ CAPACITY: 78:06:07 other capacity: 79:57:74
DiskInfo:
Mediatype:       CD-R
Current Profile: CD-R
Disk state:      complete
Empty:           0
Rewritable:      0
Appendable:      0
Sessions:        1
Tracks:          1
Layers:          1
Capacity:        79:57:74 (LBA 359849) (736970752 Bytes)
Remaining size:  00:00:00 (LBA 0) (0 Bytes)
Used Size:       78:06:08 (LBA 351458) (719785984 Bytes)
Session |  ADR   | CONTROL|  TNO   | POINT  |  Min   |  Sec   | Frame  |  Zero  |  PMIN  |  PSEC  | PFRAME |
      1 |      1 |      4 |      0 |     a0 |      0 |      0 |      0 |      0 |      1 |      0 |      0 |
      1 |      1 |      4 |      0 |     a1 |      0 |      0 |      0 |      0 |      1 |      0 |      0 |
      1 |      1 |      4 |      0 |     a2 |      0 |      0 |      0 |      0 |     78 |      8 |     10 |
      1 |      1 |      4 |      0 |      1 |      0 |      0 |      0 |      0 |      0 |      2 |      0 |
(K3bDevice::Device) found invalid bcd values. No bcd toc.
/dev/scd0: setting last sector of last track to 351459
(K3bDevice::Device) /dev/scd0:  Number of supported write speeds via 2A: 2
(K3bDevice::Device) /dev/scd0 : 2823 KB/s
(K3bDevice::Device) /dev/scd0 : 1412 KB/s
k3b: symbol lookup error: /usr/lib/libk3b.so.3: undefined symbol: stat64