Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!

Ogłoszenie

Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.

#1  2007-10-16 22:08:19

  V@M VampirE - Użytkownik

V@M VampirE
Użytkownik
Skąd: bezkresy sieci
Zarejestrowany: 2007-04-23

Nokia 5300 jako dysk.

Witam.

Mam problem z nokia 5300, mianowicie niemontuje się zbty normalnie jako dysk usb.
Połączam telefon, ustawiam tryb wymiany danych. dodaje do /dev/ urządzenie sdb i niby wszystko git. Ale jak chcę zamontować korzystając z fstab wywala błędy co do partycji, kiedy montuje na piechotę : mount -t vfat /dev/sdb /media/NOKIA/ to się niby montuje jak trzeba. Ale wymiana danych z konsloli to zwiech terminala, a mc wiesza sie na maxa. Udalo mi sie raz skopiowac kilka plików thunarem w trybie roota. Ale rzaedko się udaje bo zwylke telefon dostaje głupawki, albo dev sdb pada!

To wypluwa do /var/log/messages:

Kod:

Oct 16 21:45:55 AMI kernel: usb 3-2: new full speed USB device using ohci_hcd and address 3
Oct 16 21:45:55 AMI kernel: usb 3-2: configuration #1 chosen from 1 choice
Oct 16 21:45:55 AMI kernel: Initializing USB Mass Storage driver...
Oct 16 21:45:55 AMI kernel: scsi2 : SCSI emulation for USB Mass Storage devices
Oct 16 21:45:55 AMI kernel: usbcore: registered new driver usb-storage
Oct 16 21:45:55 AMI kernel: USB Mass Storage support registered.
Oct 16 21:46:00 AMI kernel:   Vendor: Nokia     Model: Nokia 5300        Rev: 0000
Oct 16 21:46:00 AMI kernel:   Type:   Direct-Access                      ANSI SCSI revision: 04
Oct 16 21:46:00 AMI kernel: SCSI device sdb: 990977 512-byte hdwr sectors (507 MB)
Oct 16 21:46:00 AMI kernel: sdb: Write Protect is off
Oct 16 21:46:00 AMI kernel: SCSI device sdb: 990977 512-byte hdwr sectors (507 MB)
Oct 16 21:46:00 AMI kernel: sdb: Write Protect is off
Oct 16 21:46:00 AMI kernel:  sdb:
Oct 16 21:46:00 AMI kernel: sd 2:0:0:0: Attached scsi removable disk sdb
Oct 16 21:47:34 AMI kernel: usb 3-2: reset full speed USB device using ohci_hcd and address 3
Oct 16 21:48:15 AMI last message repeated 2 times
Oct 16 21:49:02 AMI last message repeated 3 times
Oct 16 21:49:09 AMI kernel: sd 2:0:0:0: SCSI error: return code = 0x00070000
Oct 16 21:49:09 AMI kernel: end_request: I/O error, dev sdb, sector 2453
Oct 16 21:49:09 AMI kernel: sd 2:0:0:0: SCSI error: return code = 0x00070000
Oct 16 21:49:09 AMI kernel: end_request: I/O error, dev sdb, sector 2693
Oct 16 21:49:09 AMI kernel: sd 2:0:0:0: SCSI error: return code = 0x00070000
Oct 16 21:49:09 AMI kernel: end_request: I/O error, dev sdb, sector 134965
Oct 16 21:49:09 AMI kernel: sd 2:0:0:0: SCSI error: return code = 0x00070000
Oct 16 21:49:09 AMI kernel: end_request: I/O error, dev sdb, sector 33
Oct 16 21:49:09 AMI kernel: lost page write due to I/O error on sdb
Oct 16 21:49:09 AMI kernel: sd 2:0:0:0: SCSI error: return code = 0x00070000
Oct 16 21:49:09 AMI kernel: end_request: I/O error, dev sdb, sector 275
Oct 16 21:49:09 AMI kernel: lost page write due to I/O error on sdb
Oct 16 21:49:09 AMI kernel: sd 2:0:0:0: SCSI error: return code = 0x00070000
Oct 16 21:49:09 AMI kernel: end_request: I/O error, dev sdb, sector 533
Oct 16 21:49:09 AMI kernel: lost page write due to I/O error on sdb
Oct 16 21:49:09 AMI kernel: lost page write due to I/O error on sdb
Oct 16 21:49:09 AMI kernel: sd 2:0:0:0: SCSI error: return code = 0x00070000
Oct 16 21:49:09 AMI kernel: end_request: I/O error, dev sdb, sector 2981
Oct 16 21:49:09 AMI kernel: sd 2:0:0:0: SCSI error: return code = 0x00070000
Oct 16 21:49:09 AMI kernel: end_request: I/O error, dev sdb, sector 2981
Oct 16 21:49:09 AMI kernel: sd 2:0:0:0: SCSI error: return code = 0x00070000
Oct 16 21:49:09 AMI kernel: end_request: I/O error, dev sdb, sector 2982
Oct 16 21:49:09 AMI kernel: sd 2:0:0:0: SCSI error: return code = 0x00070000
Oct 16 21:49:09 AMI kernel: end_request: I/O error, dev sdb, sector 2983
Oct 16 21:49:09 AMI kernel: sd 2:0:0:0: SCSI error: return code = 0x00070000
Oct 16 21:49:09 AMI kernel: end_request: I/O error, dev sdb, sector 2984
Oct 16 21:49:09 AMI kernel: sd 2:0:0:0: SCSI error: return code = 0x00070000
Oct 16 21:49:09 AMI kernel: end_request: I/O error, dev sdb, sector 2985
Oct 16 21:49:09 AMI kernel: sd 2:0:0:0: SCSI error: return code = 0x00070000
Oct 16 21:49:09 AMI kernel: end_request: I/O error, dev sdb, sector 2986
Oct 16 21:49:09 AMI kernel: sd 2:0:0:0: SCSI error: return code = 0x00070000
Oct 16 21:49:09 AMI kernel: end_request: I/O error, dev sdb, sector 2987
Oct 16 21:49:09 AMI kernel: sd 2:0:0:0: SCSI error: return code = 0x00070000
Oct 16 21:49:09 AMI kernel: end_request: I/O error, dev sdb, sector 2988
Oct 16 21:49:09 AMI kernel: sd 2:0:0:0: SCSI error: return code = 0x00070000
Oct 16 21:49:09 AMI kernel: end_request: I/O error, dev sdb, sector 2989
Oct 16 21:49:09 AMI kernel: sd 2:0:0:0: SCSI error: return code = 0x00070000
Oct 16 21:49:09 AMI kernel: end_request: I/O error, dev sdb, sector 2990
Oct 16 21:49:09 AMI kernel: sd 2:0:0:0: SCSI error: return code = 0x00070000
Oct 16 21:49:09 AMI kernel: end_request: I/O error, dev sdb, sector 2991
Oct 16 21:49:09 AMI kernel: sd 2:0:0:0: SCSI error: return code = 0x00070000
Oct 16 21:49:09 AMI kernel: end_request: I/O error, dev sdb, sector 2992
Oct 16 21:49:09 AMI kernel: sd 2:0:0:0: SCSI error: return code = 0x00070000
Oct 16 21:49:09 AMI kernel: end_request: I/O error, dev sdb, sector 2993
Oct 16 21:49:09 AMI kernel: sd 2:0:0:0: SCSI error: return code = 0x00070000
Oct 16 21:49:09 AMI kernel: end_request: I/O error, dev sdb, sector 2994
Oct 16 21:49:09 AMI kernel: sd 2:0:0:0: SCSI error: return code = 0x00070000
Oct 16 21:49:09 AMI kernel: end_request: I/O error, dev sdb, sector 2995
Oct 16 21:49:09 AMI kernel: sd 2:0:0:0: SCSI error: return code = 0x00070000
Oct 16 21:49:09 AMI kernel: end_request: I/O error, dev sdb, sector 2996
Oct 16 21:49:09 AMI kernel: sd 2:0:0:0: SCSI error: return code = 0x00070000
Oct 16 21:49:09 AMI kernel: end_request: I/O error, dev sdb, sector 533
Oct 16 21:49:09 AMI kernel: sd 2:0:0:0: SCSI error: return code = 0x00070000
Oct 16 21:49:09 AMI kernel: end_request: I/O error, dev sdb, sector 534
Oct 16 21:49:09 AMI kernel: sd 2:0:0:0: SCSI error: return code = 0x00070000
Oct 16 21:49:09 AMI kernel: end_request: I/O error, dev sdb, sector 533
Oct 16 21:49:09 AMI kernel: sd 2:0:0:0: SCSI error: return code = 0x00070000
Oct 16 21:49:09 AMI kernel: end_request: I/O error, dev sdb, sector 534
Oct 16 21:49:09 AMI kernel: sd 2:0:0:0: SCSI error: return code = 0x00070000
Oct 16 21:49:09 AMI kernel: end_request: I/O error, dev sdb, sector 2453
Oct 16 21:49:09 AMI kernel: sd 2:0:0:0: SCSI error: return code = 0x00070000
Oct 16 21:49:09 AMI kernel: end_request: I/O error, dev sdb, sector 2453
Oct 16 21:49:09 AMI kernel: usb 3-2: USB disconnect, address 3
Oct 16 21:49:09 AMI kernel: lost page write due to I/O error on sdb
Oct 16 21:49:09 AMI kernel: lost page write due to I/O error on sdb
Oct 16 21:49:09 AMI kernel: usb 3-2: new full speed USB device using ohci_hcd and address 4
Oct 16 21:49:16 AMI kernel: usb 3-2: new full speed USB device using ohci_hcd and address 6
Oct 16 21:49:16 AMI kernel: usb 3-2: configuration #1 chosen from 1 choice
Oct 16 21:49:16 AMI kernel: cdc_acm 3-2:1.1: ttyACM0: USB ACM device
Oct 16 21:49:17 AMI kernel: usbcore: registered new driver cdc_acm
Oct 16 21:49:17 AMI kernel: drivers/usb/class/cdc-acm.c: v0.25:USB Abstract Control Model driver for USB modems and ISDN adapters
Oct 16 21:49:17 AMI kernel: usbcore: registered new driver cdc_ether
Oct 16 21:49:17 AMI kernel: usb%%d: unregister 'rndis_host' usb-0000:00:02.1-2, RNDIS device
Oct 16 21:49:17 AMI kernel: Modules linked in: rndis_host cdc_ether usbnet cdc_acm nls_iso8859_1 nls_cp437 vfat fat usb_storage ipv6 nvidia button ac battery reiserfs dm_snapshot dm_mirror dm_mod loop snd_emu10k1_synth snd_emux_synth snd_seq_virmidi snd_seq_midi_emul snd_mpu401 snd_mpu401_uart snd_emu10k1 snd_ac97_codec snd_ac97_bus snd_seq_dummy snd_seq_oss snd_pcm_oss snd_mixer_oss snd_seq_midi snd_seq_midi_event snd_pcm snd_seq snd_timer snd_page_alloc snd_util_mem snd_rawmidi snd_seq_device snd_hwdep snd emu10k1_gp gameport floppy soundcore serio_raw psmouse shpchp pci_hotplug rtc pcspkr i2c_nforce2 i2c_core amd64_agp agpgart tsdev evdev ext3 jbd mbcache ide_generic sd_mod ide_cd cdrom ide_disk usbhid sata_nv libata scsi_mod amd74xx ohci_hcd ehci_hcd generic ide_core forcedeth usbcore thermal processor fan
Oct 16 21:49:17 AMI kernel: EIP:    0060:[<c0156d77>]    Tainted: P      VLI
Oct 16 21:49:17 AMI kernel: EFLAGS: 00010006   (2.6.18-4-686 #1) 
Oct 16 21:49:17 AMI kernel:  [<e8cbc01a>] usbnet_probe+0x4ee/0x503 [usbnet]
Oct 16 21:49:17 AMI kernel:  [<c0210b68>] __driver_attach+0x0/0x5d
Oct 16 21:49:17 AMI kernel:  [<e885eba5>] usb_probe_interface+0x58/0x87 [usbcore]
Oct 16 21:49:17 AMI kernel:  [<c0210ac9>] driver_probe_device+0x42/0x8b
Oct 16 21:49:17 AMI kernel:  [<c0210ba0>] __driver_attach+0x38/0x5d
Oct 16 21:49:17 AMI kernel:  [<c02105ea>] bus_for_each_dev+0x33/0x55
Oct 16 21:49:17 AMI kernel:  [<c0210a33>] driver_attach+0x11/0x13
Oct 16 21:49:17 AMI kernel:  [<c0210b68>] __driver_attach+0x0/0x5d
Oct 16 21:49:17 AMI kernel:  [<c0210303>] bus_add_driver+0x64/0xfd
Oct 16 21:49:17 AMI kernel:  [<e885e9da>] usb_register_driver+0x60/0xbb [usbcore]
Oct 16 21:49:17 AMI kernel:  [<c01358c1>] sys_init_module+0x16c3/0x1846
Oct 16 21:49:17 AMI kernel:  [<c0102c11>] sysenter_past_esp+0x56/0x79
Oct 16 21:49:32 AMI kernel:  <3>scsi 2:0:0:0: rejecting I/O to dead device
Oct 16 21:49:32 AMI kernel: lost page write due to I/O error on sdb
Oct 16 21:49:32 AMI kernel: lost page write due to I/O error on sdb
Oct 16 21:49:44 AMI kernel: usb 3-2: USB disconnect, address 6

Karta fomatowana w telefonie, i te pliki które się na nią wgrały działają i nic się nie dzieje telefon na 100% działa. Pod win xp wszystko normalnie 0 sterów jako dysk usb się montuje.

Dzięki za wszelkie porady, kernel 2.6.18-4-686 norma z wersji stabilnej Debiana 4.0
Usb działaja bez problemów.


Maksymalizacja efektów przez cierpliwe uczenie sie to chyba właściwa droga.

Offline

 

Stopka forum

Powered by PunBB
© Copyright 2002–2005 Rickard Andersson
Możesz wyłączyć AdBlock — tu nie ma reklam ;-)