Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!

Ogłoszenie

Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.

#1  2007-03-01 00:54:28

  TeHaX - Użytkownik

TeHaX
Użytkownik
Zarejestrowany: 2006-06-07

bind9+apache2+subdomeny

Witam,
mam taka konfiguracje i niby wszystko dziala ok jak wpisze http://sub2.domena.pl
ale jak juz wpisze http://www.sub2.domena.pl to nie moze znalezc strony i tak jest ze wszystkim subdomenami.
Co musze zmienic aby dzialalo mi z www ?
Pozdrawiam.


/etc/bind/domena.pl

Kod:

; BIND db file for domena.pl

$TTL 86400

@       IN      SOA     domena.pl.      sub1.domena.pl. (
                        2007022805    ; serial number YYMMDDNN
                    28800           ; Refresh
                    7200            ; Retry
                    864000          ; Expire
                    86400           ; Min TTL
                                )

    IN    NS      ns1.domena.pl. 
        IN    NS    ns2.domena.pl.    

    IN    MX      10 domena.pl.

    IN    A    ip.ip.ip.ip
ns1    IN    CNAME    domena.pl.
ns2    IN    CNAME    domena.pl.
sub1    IN    CNAME    domena.pl.
sub2    IN    CNAME    domena.pl.
sub3    IN    CNAME    domena.pl.
www    IN    CNAME    domena.pl.
$ORIGIN domena.pl.

/etc/apache2/sites-available/default

Kod:

...
<VirtualHost *>
ServerAdmin webmaster@domena.pl
DocumentRoot /var/www/sub2
ServerName sub2.domena.pl
ServerAlias www.sub2.domena.pl
</VirtualHost>

Offline

 

#2  2007-03-01 07:41:14

  BialyS - Członek DUG

BialyS
Członek DUG
Skąd: Olecko
Zarejestrowany: 2006-11-23
Serwis

Re: bind9+apache2+subdomeny

Kod:

www    IN    A    ip_mojego_serwera

http://annabielawska.pl Biuro Rachunkowe | http://ranking.cebr.pl Największy w sieci ranking biur rachunkowych

Offline

 

#3  2007-03-01 22:08:14

  TeHaX - Użytkownik

TeHaX
Użytkownik
Zarejestrowany: 2006-06-07

Re: bind9+apache2+subdomeny

po zmianie na cos takiego:

Kod:

www    IN   A   ip.ip.ip.ip
ns1   IN   CNAME   domena.pl. 
ns2   IN   CNAME   domena.pl. 
sub1   IN   CNAME   domena.pl. 
sub2   IN   CNAME   domena.pl. 
sub3   IN   CNAME   domena.pl. 

efekt jest taki ze:
- na IE7
dziala http://domena.pl http://www.domena.pl http://sub2.domena.pl
natomiast http://www.sub2.domena.pl nie dziala
- na firefox1.5
dziala http://www.domena.pl http://sub2.domena.pl
nie dziala http://domena.pl i http://www.sub2.domena.pl

//update:

o 10:30 na ff i ie dziala tylko http://www.domena.pl pozostale adresy adresy nie dzialaja :/

Offline

 

#4  2007-03-03 12:53:37

  djinn - Członek DUG

djinn
Członek DUG
Zarejestrowany: 2005-11-12

Re: bind9+apache2+subdomeny

Witam.
Mam ten sam problem co kolega, albo działa mi www.sub2.domena.pl, albo sub2.domena.pl, nigdy razem one nie dzialaja. Sprawdzalem na ff i links, tak samo obie przegladarki sie zachowuja.


Peace

Offline

 

#5  2007-03-03 13:58:02

  Libo - Użytkownik

Libo
Użytkownik
Skąd: Żory
Zarejestrowany: 2004-10-25

Re: bind9+apache2+subdomeny

jakos strasznie kombinujecie z tymi domenami :D
do pierwszego postu

/etc/bind/domena.pl

Kod:

; BIND db file for domena.pl

$TTL 86400

@       IN      SOA     domena.pl.      sub1.domena.pl. (
                        2007022805   ; serial number YYMMDDNN
                   28800           ; Refresh
                   7200            ; Retry
                   864000          ; Expire
                   86400           ; Min TTL
                         )

   IN   NS      ns1.domena.pl.
       IN   NS   ns2.domena.pl.   

   IN   MX      10 domena.pl.

   IN   A   ip.ip.ip.ip
ns1   IN   CNAME   domena.pl.
ns2   IN   CNAME   domena.pl.
sub1   IN   CNAME   domena.pl.
sub2   IN   CNAME   domena.pl.
sub3   IN   CNAME   domena.pl.
www   IN   CNAME   domena.pl.
$ORIGIN domena.pl.

wystarczylo dopisac:

Kod:

www.sub1   IN   CNAME   domena.pl.

itd...


Nie ma nie idzie... jest nie umiem.

Offline

 

#6  2007-03-03 19:21:25

  TeHaX - Użytkownik

TeHaX
Użytkownik
Zarejestrowany: 2006-06-07

Re: bind9+apache2+subdomeny

problem rozwiazal mi kolega, mowil ze mam strasznie namieszane :] nawet w .nazwa.pl

httpd.conf:

Kod:

NameVirtualHost ip.ip.ip.ip

ServerName www.domena.pl
ServerSignature Off

<Files .htaccess>
order allow,deny
deny from all
</Files>

<VirtualHost ip.ip.ip.ip>
DocumentRoot /var/www
ErrorLog /var/log/subdomeny/glowna_error.log
TransferLog /var/log/subdomeny/glowna_transfer.log
ServerName domena.pl
ServerAlias www.domena.pl
</VirtualHost>

<VirtualHost ip.ip.ip.ip>
DocumentRoot /var/www/sub1
ErrorLog /var/log/subdomeny/sub1_error.log
TransferLog /var/log/subdomeny/sub1_transfer.log
ServerName sub1.domena.pl
ServerAlias www.sub1.domena.pl
</VirtualHost>

<VirtualHost ip.ip.ip.ipv>
DocumentRoot /var/www/sub2
ErrorLog /var/log/subdomeny/sub2_error.log
TransferLog /var/log/subdomeny/sub2_transfer.log
ServerName sub2.domena.pl
ServerAlias www.sub2.domena.pl
</VirtualHost>

<VirtualHost ip.ip.ip.ip>
DocumentRoot /var/www/sub3
ErrorLog /var/log/subdomeny/sub3_error.log
TransferLog /var/log/subdomeny/sub3_transfer.log
ServerName sub3.domena.pl
ServerAlias www.sub3.domena.pl
</VirtualHost>

<Directory "/var/www/*/cgi-bin">
Options +ExecCGI
</Directory>

<Directory>
AllowOverride All
FollowSymLinks
</Directory>

domena.pl

Kod:

@       IN      SOA     domena.pl. root.domena.pl. (
                        2007030297      ; numer seryjny, dzisiejsza data + numer zmiany
                        1H              ; odswieżanie, w sekundach
                        2H              ; powtórzenie, w sekundach
                        1W              ; przedawnienie, w sekundach
                        1D )            ; minimum, w sekundach


        MX    10    ip.ip.ip.ip
        IN    NS    ip.ip.ip.ip
        IN    NS    ns1.netart.pl.
        
@        IN    A    ip.ip.ip.ip

localhost        A    127.0.0.1

www        IN    CNAME    @
www.sub1    IN    CNAME    @
sub1        IN    CNAME    @
www.sub2    IN    CNAME    @
sub2        IN    CNAME    @
www.sub3    IN    CNAME    @
sub3        IN    CNAME    @

Offline

 

#7  2012-04-15 14:45:42

  TeHaX - Użytkownik

TeHaX
Użytkownik
Zarejestrowany: 2006-06-07

Re: bind9+apache2+subdomeny

Problem powrócił, pliki konfiguracyjne jak niżej.

apache2.2.16 na subdomenach przyjmuje wartość ServerName tehax.domena.pl:80 ale ServerAlias www.tehax.domena.pl:80 jest pomijany.

Objaw jest taki że po wpisaniu www.tehax.domena.pl otwiera się defaultowa strona www.domena.pl

apache2.conf

Kod:

#
# Based upon the NCSA server configuration files originally by Rob McCool.
#
# This is the main Apache server configuration file.  It contains the
# configuration directives that give the server its instructions.
# See http://httpd.apache.org/docs/2.2/ for detailed information about
# the directives.
#
# Do NOT simply read the instructions in here without understanding
# what they do.  They're here only as hints or reminders.  If you are unsure
# consult the online docs. You have been warned.  
#
# The configuration directives are grouped into three basic sections:
#  1. Directives that control the operation of the Apache server process as a
#     whole (the 'global environment').
#  2. Directives that define the parameters of the 'main' or 'default' server,
#     which responds to requests that aren't handled by a virtual host.
#     These directives also provide default values for the settings
#     of all virtual hosts.
#  3. Settings for virtual hosts, which allow Web requests to be sent to
#     different IP addresses or hostnames and have them handled by the
#     same Apache server process.
#
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path.  If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "foo.log"
# with ServerRoot set to "/etc/apache2" will be interpreted by the
# server as "/etc/apache2/foo.log".
#

### Section 1: Global Environment
#
# The directives in this section affect the overall operation of Apache,
# such as the number of concurrent requests it can handle or where it
# can find its configuration files.
#

#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# NOTE!  If you intend to place this on an NFS (or otherwise network)
# mounted filesystem then please read the LockFile documentation (available
# at <URL:http://httpd.apache.org/docs/2.2/mod/mpm_common.html#lockfile>);
# you will save yourself a lot of trouble.
#
# Do NOT add a slash at the end of the directory path.
#
ServerRoot "/etc/apache2"

#
# The accept serialization lock file MUST BE STORED ON A LOCAL DISK.
#
LockFile ${APACHE_LOCK_DIR}/accept.lock

#
# PidFile: The file in which the server should record its process
# identification number when it starts.
# This needs to be set in /etc/apache2/envvars
#
PidFile ${APACHE_PID_FILE}

#
# Timeout: The number of seconds before receives and sends time out.
#
Timeout 300

#
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
#
KeepAlive On

#
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
#
MaxKeepAliveRequests 100

#
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
#
KeepAliveTimeout 15

##
## Server-Pool Size Regulation (MPM specific)
## 

# prefork MPM
# StartServers: number of server processes to start
# MinSpareServers: minimum number of server processes which are kept spare
# MaxSpareServers: maximum number of server processes which are kept spare
# MaxClients: maximum number of server processes allowed to start
# MaxRequestsPerChild: maximum number of requests a server process serves
<IfModule mpm_prefork_module>
    StartServers          5
    MinSpareServers       5
    MaxSpareServers      10
    MaxClients          150
    MaxRequestsPerChild   0
</IfModule>

# worker MPM
# StartServers: initial number of server processes to start
# MaxClients: maximum number of simultaneous client connections
# MinSpareThreads: minimum number of worker threads which are kept spare
# MaxSpareThreads: maximum number of worker threads which are kept spare
# ThreadLimit: ThreadsPerChild can be changed to this maximum value during a
#              graceful restart. ThreadLimit can only be changed by stopping
#              and starting Apache.
# ThreadsPerChild: constant number of worker threads in each server process
# MaxRequestsPerChild: maximum number of requests a server process serves
<IfModule mpm_worker_module>
    StartServers          2
    MinSpareThreads      25
    MaxSpareThreads      75 
    ThreadLimit          64
    ThreadsPerChild      25
    MaxClients          150
    MaxRequestsPerChild   0
</IfModule>

# event MPM
# StartServers: initial number of server processes to start
# MaxClients: maximum number of simultaneous client connections
# MinSpareThreads: minimum number of worker threads which are kept spare
# MaxSpareThreads: maximum number of worker threads which are kept spare
# ThreadsPerChild: constant number of worker threads in each server process
# MaxRequestsPerChild: maximum number of requests a server process serves
<IfModule mpm_event_module>
    StartServers          2
    MaxClients          150
    MinSpareThreads      25
    MaxSpareThreads      75 
    ThreadLimit          64
    ThreadsPerChild      25
    MaxRequestsPerChild   0
</IfModule>

# These need to be set in /etc/apache2/envvars
User www-data
Group www-data

#
# AccessFileName: The name of the file to look for in each directory
# for additional configuration directives.  See also the AllowOverride
# directive.
#

AccessFileName .htaccess

#
# The following lines prevent .htaccess and .htpasswd files from being 
# viewed by Web clients. 
#
<Files ~ "^\.ht">
    Order allow,deny
    Deny from all
    Satisfy all
</Files>

#
# DefaultType is the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value.  If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
#
DefaultType text/plain


#
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
#
HostnameLookups Off

# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here.  If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog ${APACHE_LOG_DIR}/error.log

#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn

# Include module configuration:
Include mods-enabled/*.load
Include mods-enabled/*.conf

# Include all the user configurations:
Include httpd.conf

# Include ports listing
Include ports.conf

#
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
# If you are behind a reverse proxy, you might want to change %h into %{X-Forwarded-For}i
#
LogFormat "%v:%p %h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" vhost_combined
LogFormat "%h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %O" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent

# Include of directories ignores editors' and dpkg's backup files,
# see README.Debian for details.

# Include generic snippets of statements
Include conf.d/

# Include the virtual host configurations:
Include sites-enabled/

tehax.domena.pl

Kod:

<VirtualHost *:80>
    ServerAdmin root@domena.pl
    ServerName tehax.domena.pl:80
    ServerAlias www.tehax.domena.pl:80
    DocumentRoot /var/www/tehax
    ErrorLog /var/log/www/domena.pl/tehax.domena.pl:80.log
    TransferLog /var/log/www/domena.pl/tehax.domena.pl:80_transfer.log
</VirtualHost>

<VirtualHost *:443>
    ServerAdmin root@domena.pl
    DocumentRoot /var/www/tehax
    ServerName tehax.domena.pl:443
    ServerAlias www.tehax.domena.pl:443
    ErrorLog /var/log/www/domena.pl/tehax.domena.pl:443.log
    TransferLog /var/log/www/domena.pl/tehax.domena.pl:443_transfer.log
    SSLEngine on
    SSLCipherSuite ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP:+eNULL
    SSLCertificateFile /etc/apache2/certyfikaty/server.crt
    SSLCertificateKeyFile /etc/apache2/certyfikaty/server.pem
</VirtualHost>

default

Kod:

<VirtualHost *:80>
    ServerAdmin webmaster@localhost

    DocumentRoot /var/www
    <Directory />
        Options FollowSymLinks
        AllowOverride All
    </Directory>
    <Directory /var/www/>
        Options Indexes FollowSymLinks MultiViews
        AllowOverride All
        Order allow,deny
        allow from all
    </Directory>

    ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/
    <Directory "/usr/lib/cgi-bin">
        AllowOverride None
        Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch
        Order allow,deny
        Allow from all
    </Directory>

    ErrorLog ${APACHE_LOG_DIR}/error.log

    # Possible values include: debug, info, notice, warn, error, crit,
    # alert, emerg.
    LogLevel warn

    CustomLog ${APACHE_LOG_DIR}/access.log combined

    Alias /doc/ "/usr/share/doc/"
    <Directory "/usr/share/doc/">
        Options Indexes MultiViews FollowSymLinks
        AllowOverride None
        Order deny,allow
        Deny from all
        Allow from 127.0.0.0/255.0.0.0 ::1/128
    </Directory>


</VirtualHost>

httpd.conf

Kod:

#Listen *:80
#Listen *:443

#NameVirtualHost *:80
NameVirtualHost *:443

AddType application/x-httpd-php5 .php5
AddType applicaiton/x-httpd-php5 .img
AddType application/x-httpd-php .html
ScriptAlias /php/ "/usr/bin/"
AddHandler cgi-script .cgi .pl

AddDefaultCharset UTF-8


<Directory /home/*/www/cgi-bin/>
    Options +ExecCGI
</Directory>

DNS domena.pl

Kod:

$TTL 43200
$ORIGIN domena.pl.
@       IN      SOA     domena.pl. root.domena.pl. (
                        2012041501      ; numer seryjny, dzisiejsza data + numer zmiany
                        1H              ; odswieżanie, w sekundach
                        2H              ; powtarzenie, w sekundach
                        1W              ; przedawnienie, w sekundach
                        1D )            ; minimum, w sekundach


            MX    10    domena.pl.
        IN    NS    dns1.domena.pl.
        IN    NS    dns2.domena.pl.

@        IN    A    ip_servera

dns1        IN    A    ip_servera
dns2        IN    A    ip_servera2


localhost        A    127.0.0.1


www        IN    CNAME    @

tehax        IN    CNAME    @
www.tehax    IN    CNAME    @

_________________EDYCJA___________

czy następujące rozwiązanie jest poprawne czy jest obejściem problemu na około:

zmiana:

    ServerName tehax.domena.pl:80
    ServerAlias www.tehax.domena.pl:80
    ServerName tehax.domena.pl:443
    ServerAlias www.tehax.domena.pl:443

na

    ServerName tehax.domena.pl
    ServerAlias www.tehax.domena.pl
    ServerName tehax.domena.pl
    ServerAlias www.tehax.domena.pl


oraz

   tehax            IN    CNAME    @
   www.tehax    IN    CNAME    @

na

   tehax            IN    CNAME    @
   www.tehax    IN    CNAME    tehax.domena.pl.

Ostatnio edytowany przez TeHaX (2012-04-15 17:14:40)

Offline

 

Stopka forum

Powered by PunBB
© Copyright 2002–2005 Rickard Andersson
To nie jest tylko forum, to nasza mała ojczyzna ;-)