Forum Debian Users Gang

00:00.0 Host bridge: VIA Technologies, Inc. CN400/PM880 Host Bridge
00:00.1 Host bridge: VIA Technologies, Inc. CN400/PM880 Host Bridge
00:00.2 Host bridge: VIA Technologies, Inc. CN400/PM880 Host Bridge
00:00.3 Host bridge: VIA Technologies, Inc. CN400/PM880 Host Bridge
00:00.4 Host bridge: VIA Technologies, Inc. CN400/PM880 Host Bridge
00:00.7 Host bridge: VIA Technologies, Inc. CN400/PM880 Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge
00:0c.0 CardBus bridge: ENE Technology Inc CB1410 Cardbus Controller (rev 01)
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 50)
00:11.6 Communication controller: VIA Technologies, Inc. AC'97 Modem Controller (rev 80)
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 74)
01:00.0 VGA compatible controller: VIA Technologies, Inc. S3 Unichrome Pro VGA Adapter (rev 02)

Module                  Size  Used by
rfcomm                 34616  0 
l2cap                  21696  5 rfcomm
bluetooth              45732  4 rfcomm,l2cap
button                  6672  0 
ac                      5188  0 
battery                 9636  0 
nls_iso8859_1           4256  1 
nls_cp437               5920  1 
vfat                   11872  1 
fat                    46684  1 vfat
dm_snapshot            15520  0 
dm_mirror              19152  0 
dm_mod                 50232  2 dm_snapshot,dm_mirror
loop                   15048  0 
pcmcia                 34108  0 
firmware_class          9600  1 pcmcia
snd_via82xx            26008  0 
via_ircc               23188  0 
gameport               14632  1 snd_via82xx
irda                  162588  1 via_ircc
snd_usb_audio          69024  0 
snd_usb_lib            14976  1 snd_usb_audio
snd_via82xx_modem      14088  0 
snd_ac97_codec         83104  2 snd_via82xx,snd_via82xx_modem
snd_mpu401_uart         8064  1 snd_via82xx
crc_ccitt               2240  1 irda
snd_ac97_bus            2400  1 snd_ac97_codec
rtc                    12372  0 
pcspkr                  3072  0 
i2c_viapro              8148  0 
snd_rawmidi            22560  2 snd_usb_lib,snd_mpu401_uart
snd_seq_device          7820  1 snd_rawmidi
snd_hwdep               8836  1 snd_usb_audio
psmouse                35016  0 
serio_raw               6660  0 
snd_pcm                68644  4 snd_via82xx,snd_usb_audio,snd_via82xx_modem,snd_ac97_codec
snd_timer              20996  1 snd_pcm
snd_page_alloc          9640  3 snd_via82xx,snd_via82xx_modem,snd_pcm
snd                    47012  10 snd_via82xx,snd_usb_audio,snd_via82xx_modem,snd_ac97_codec,snd_mpu401_uart,snd_rawmidi,snd_seq_device,snd_hwdep,snd_pcm,snd_timer
via82cxxx_audio        24296  0 
uart401                11172  1 via82cxxx_audio
sound                  69768  2 via82cxxx_audio,uart401
soundcore               9248  3 snd,via82cxxx_audio,sound
ac97_codec             17196  1 via82cxxx_audio
i2c_core               19680  1 i2c_viapro
yenta_socket           24460  1 
rsrc_nonstatic         11840  1 yenta_socket
pcmcia_core            36852  3 pcmcia,yenta_socket,rsrc_nonstatic
shpchp                 33024  0 
pci_hotplug            28704  1 shpchp
via_agp                 9664  1 
agpgart                29896  1 via_agp
joydev                  9088  0 
tsdev                   7520  0 
evdev                   9088  0 
ext3                  119208  1 
jbd                    52456  1 ext3
mbcache                 8356  1 ext3
ide_cd                 36064  0 
cdrom                  32544  1 ide_cd
ide_disk               14848  4 
generic                 5028  0 [permanent]
usbhid                 37248  0 
via_rhine              22664  0 
mii                     5344  1 via_rhine
via82cxxx               8388  0 [permanent]
ehci_hcd               28136  0 
uhci_hcd               21032  0 
ide_core              110504  4 ide_cd,ide_disk,generic,via82cxxx
usbcore               112676  6 snd_usb_audio,snd_usb_lib,usbhid,ehci_hcd,uhci_hcd
thermal                13608  0 
processor              28840  1 thermal
fan                     4804  0

Linux version 2.6.18-3-686 (Debian 2.6.18-7) (waldi@debian.org) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-20)) #1 SMP Mon Dec 4 16:41:14 UTC 2006
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000d0000 - 00000000000d8000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000002bef0000 (usable)
 BIOS-e820: 000000002bef0000 - 000000002befb000 (ACPI data)
 BIOS-e820: 000000002befb000 - 000000002bf00000 (ACPI NVS)
 BIOS-e820: 000000002bf00000 - 000000002c000000 (reserved)
 BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
702MB LOWMEM available.
found SMP MP-table at 000f7d10
On node 0 totalpages: 179952
  DMA zone: 4096 pages, LIFO batch:0
  Normal zone: 175856 pages, LIFO batch:31
DMI present.
ACPI: RSDP (v000 PTLTD                                 ) @ 0x000f7ce0
ACPI: RSDT (v001 PTLTD    RSDT   0x06040000  LTP 0x00000000) @ 0x2bef6b04
ACPI: FADT (v001 PN800  PTLTW    0x06040000 PTL_ 0x000f4240) @ 0x2befaf8c
ACPI: DSDT (v001 FIC    sisi     0x06040000 MSFT 0x0100000e) @ 0x00000000
ACPI: PM-Timer IO Port: 0x4008
Intel MultiProcessor Specification v1.4
    Virtual Wire compatibility mode.
SMP mptable: bad signature [0x0]!
BIOS bug, MP table errors detected!...
... disabling SMP support. (tell your hw vendor)
Allocating PCI resources starting at 30000000 (gap: 2c000000:d3f80000)
Detected 1496.319 MHz processor.
Built 1 zonelists.  Total pages: 179952
Kernel command line: root=/dev/hda6 ro 
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffd000 (0158c000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 705720k/719808k available (1543k kernel code, 13500k reserved, 574k data, 196k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 2995.62 BogoMIPS (lpj=5991255)
Security Framework v1.0.0 initialized
SELinux:  Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: a7e9f9bf 00000000 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: a7e9f9bf 00000000 00000000 00000000 00000000 00000000 00000000
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 512K
CPU: After all inits, caps: a7e9f9bf 00000000 00000000 00000040 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 16k freed
ACPI: Core revision 20060707
ACPI: setting ELCR to 0200 (from 0c80)
CPU0: Intel(R) Celeron(R) M processor         1500MHz stepping 05
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
Brought up 1 CPUs
migration_cost=0
checking if image is initramfs... it is
Freeing initrd memory: 4390k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd90c, last bus=1
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 4000-407f claimed by vt8235 PM
PCI quirk: region 8100-810f claimed by vt8235 SMB
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [ALKA] (IRQs 16 17 18 19 20 21 22 23) *7, disabled.
ACPI: PCI Interrupt Link [ALKB] (IRQs 16 17 18 19 20 21 22 23) *10, disabled.
ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0, disabled.
ACPI: PCI Interrupt Link [ALKD] (IRQs 21) *11, disabled.
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 *7)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 *11)
ACPI: Power Resource [FN10] (off)
ACPI: Power Resource [FN11] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 9 devices
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
PCI: Failed to allocate mem resource #6:10000@f4000000 for 0000:01:00.0
PCI: Bridge: 0000:00:01.0
  IO window: disabled.
  MEM window: d1000000-d1ffffff
  PREFETCH window: f0000000-f3ffffff
PCI: Bus 2, cardbus bridge: 0000:00:0c.0
  IO window: 00002000-000020ff
  IO window: 00002400-000024ff
  PREFETCH window: 30000000-31ffffff
  MEM window: 32000000-33ffffff
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:0c.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
audit: initializing netlink socket (disabled)
audit(1169918173.132:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 8
NET: Registered protocol family 20
Using IPI No-Shortcut mode
ACPI: (supports S0 S3 S4 S5)
Freeing unused kernel memory: 196k freed
Time: tsc clocksource has been installed.
ACPI: Transitioning device [FN1] to D3
ACPI: Transitioning device [FN1] to D3
ACPI: Fan [FN1] (off)
ACPI: Transitioning device [FN2] to D3
ACPI: Transitioning device [FN2] to D3
ACPI: Fan [FN2] (off)
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: Thermal Zone [THRM] (32 C)
usbcore: registered new driver usbfs
usbcore: registered new driver hub
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 7
PCI: setting IRQ 7 as level-triggered
ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKA] -> GSI 7 (level, low) -> IRQ 7
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:10.0: irq 7, io base 0x00001020
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:10.1: irq 10, io base 0x00001040
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
via-rhine.c:v1.10-LK1.4.1 July-24-2006 Written by Donald Becker
Time: acpi_pm clocksource has been installed.
input: AT Translated Set 2 keyboard as /class/input/input0
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:10.3[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
ehci_hcd 0000:00:10.3: EHCI Host Controller
ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:10.3: irq 11, io mem 0xd0000000
ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
VP_IDE: IDE controller at PCI slot 0000:00:11.1
ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [LNKA] -> GSI 7 (level, low) -> IRQ 7
PCI: VIA IRQ fixup for 0000:00:11.1, from 0 to 7
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
    ide0: BM-DMA at 0x1000-0x1007, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0x1008-0x100f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: FUJITSU MHT2040AT, ATA DISK drive
usb 1-1: new low speed USB device using uhci_hcd and address 2
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
usb 1-1: configuration #1 chosen from 1 choice
usb 1-2: new full speed USB device using uhci_hcd and address 3
usb 1-2: configuration #1 chosen from 1 choice
usbcore: registered new driver hiddev
input: Logitech USB Receiver as /class/input/input1
input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:10.0-1
input: Logitech USB Receiver as /class/input/input2
input,hiddev96: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:10.0-1
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
hdc: SONY DVD RW DW-Q58A, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
PCI: Enabling device 0000:00:12.0 (0010 -> 0013)
ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LNKA] -> GSI 7 (level, low) -> IRQ 7
eth0: VIA Rhine II at 0x11c00, 00:40:ca:c1:50:9b, IRQ 7.
eth0: MII PHY found at address 1, status 0x7869 advertising 05e1 Link 45e1.
hda: max request size: 128KiB
hda: 78140160 sectors (40007 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
hda: cache flushes supported
 hda: hda1 hda2 < hda5 hda6 hda7 >
hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
Attempting manual resume
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
ts: Compaq touchscreen protocol output
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected VIA PM800/PN800/PM880/PN880 chipset
agpgart: AGP aperture is 128M @ 0xd8000000
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Yenta: CardBus bridge found at 0000:00:0c.0 [1734:1078]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:0c.0, mfunc 0x01021002, devctl 0x44
Yenta: ISA IRQ mask 0x0078, PCI irq 10
Socket status: 30000006
Via 686a/8233/8235 audio driver 1.9.1-ac4-2.5
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
via82cxxx: Six channel audio available
PCI: Setting latency timer of device 0000:00:11.5 to 64
ac97_codec: AC97  codec, id: ALG96 (Unknown)
via82cxxx: Codec rate locked at 48Khz
via82cxxx: board #1 at 0x1400, IRQ 11
input: PC Speaker as /class/input/input3
Real Time Clock Driver v1.12ac
PCI: Enabling device 0000:00:11.6 (0000 -> 0001)
ACPI: PCI Interrupt 0000:00:11.6[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:11.6 to 64
usbcore: registered new driver snd-usb-audio
irda_init()
NET: Registered protocol family 23
input: PS/2 Mouse as /class/input/input4
input: AlpsPS/2 ALPS GlidePoint as /class/input/input5
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
Adding 787144k swap on /dev/hda7.  Priority:-1 extents:1 across:787144k
EXT3 FS on hda6, internal journal
loop: loaded (max 8 devices)
device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
ACPI: Battery Slot [BAT0] (battery present)
ACPI: AC Adapter [ACAD] (on-line)
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ACPI: Lid Switch [LID]
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status 0003, PHY status 786d, resetting...
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status 0003, PHY status 786d, resetting...
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status 0003, PHY status 786d, resetting...
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Bluetooth: Core ver 2.10
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status 0003, PHY status 786d, resetting...
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
psmouse.c: GlidePoint at isa0060/serio4/input0 lost synchronization, throwing 1 bytes away.
psmouse.c: resync failed, issuing reconnect request