Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!

Ogłoszenie

Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.

#1  2006-11-21 19:54:54

  uszek - Członek DUG

uszek
Członek DUG
Skąd: Nisko
Zarejestrowany: 2004-06-25

Karta PCMCIA 3com i kernel 2.6.17

no i problemik kernel 2.6.17 karta pcmcia 3com megahertz 3ccfem556b i karty ogole nie wykrywa przy ponownym restarcie sieci dostaje

Kod:

Please contribute if you find this software useful.
For info, please visit http://www.isc.org/dhcp-contrib.html

sit0: unknown hardware address type 776
eth0: ERROR while getting interface flags: No such device
sit0: unknown hardware address type 776
Bind socket to interface: No such device
exiting.
Failed to bring up eth0.
done.

DOdam jedynie tyle ze na kernelu 2.4.27 karta jest ykrywana bez problemu i działa a na 2.6 nie chce

co z tym zrobic ??


Uszek
uszek7@poczta.fm
GG #4444331
Linux Registered User: #307434

Offline

 

#2  2006-11-22 17:46:51

  Szczur[R] - Użytkownik

Szczur[R]
Użytkownik
Skąd: Czestochowa
Zarejestrowany: 2006-03-29

Re: Karta PCMCIA 3com i kernel 2.6.17

ja bym zaczal od zapodania dmesg i lspci na forum.... :P


pozdr


http://sopot.i365.pl/neo/i/us4.jpg

Offline

 

#3  2006-11-22 19:42:00

  uszek - Członek DUG

uszek
Członek DUG
Skąd: Nisko
Zarejestrowany: 2004-06-25

Re: Karta PCMCIA 3com i kernel 2.6.17

Kod:

debian:/home/uurwis# dmesg
Linux version 2.6.17-2-486 (Debian 2.6.17-9) (waldi@debian.org) (gcc version 4.1.2 20060901 (prerelease) (Debian 4.1.1-13)) #1 Wed Sep 13 15:56:30 UTC 2006
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000c0000 - 00000000000cc000 (reserved)
 BIOS-e820: 0000000000100000 - 000000000bfec000 (usable)
 BIOS-e820: 000000000bfec000 - 000000000bff0000 (reserved)
 BIOS-e820: 00000000100a0000 - 0000000010100000 (reserved)
 BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
191MB LOWMEM available.
On node 0 totalpages: 49132
  DMA zone: 4096 pages, LIFO batch:0
  Normal zone: 45036 pages, LIFO batch:7
DMI 2.3 present.
ACPI: RSDP (v000 DELL                                  ) @ 0x000f3900
ACPI: RSDT (v001 DELL    CPi R   0x27d00810 ASL  0x00000061) @ 0x0bff0000
ACPI: FADT (v001 DELL    CPi R   0x27d00810 ASL  0x00000061) @ 0x0bff0400
ACPI: DSDT (v001 INT430 SYSFexxx 0x00001001 MSFT 0x0100000c) @ 0x00000000
ACPI: PM-Timer IO Port: 0x808
Allocating PCI resources starting at 20000000 (gap: 10100000:efd00000)
Built 1 zonelists
Kernel command line: root=/dev/hda3 ro devfs=noumount
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffd000 (01181000)
Enabling fast FPU save and restore... done.
Initializing CPU#0
PID hash table entries: 1024 (order: 10, 4096 bytes)
Detected 397.118 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 187560k/196528k available (1456k kernel code, 8428k reserved, 566k data, 252k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 795.03 BogoMIPS (lpj=1590068)
Security Framework v1.0.0 initialized
SELinux:  Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0183f9ff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0183f9ff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 128K
CPU: After all inits, caps: 0183f9ff 00000000 00000000 00000040 00000000 00000000 00000000
CPU: Intel Celeron (Mendocino) stepping 0a
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 0k freed
ACPI: setting ELCR to 0200 (from 0820)
checking if image is initramfs... it is
Freeing initrd memory: 4159k freed
NET: Registered protocol family 16
EISA bus registered
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfc0be, last bus=1
Setting up standard PCI resources
ACPI: Subsystem revision 20060127
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [_SB_.PCI0] bus is 0
PCI quirk: region 0800-083f claimed by PIIX4 ACPI
PCI quirk: region 0840-084f claimed by PIIX4 SMB
PIIX4 devres B PIO at 00e0-00e7
PIIX4 devres C PIO at 0850-085f
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Routing Table [_SB_.PCI0.AGP_._PRT]
ACPI: Power Resource [PADA] (on)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 15 devices
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
pnp: 00:02: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:02: ioport range 0x800-0x805 could not be reserved
pnp: 00:02: ioport range 0x808-0x80f could not be reserved
pnp: 00:03: ioport range 0x806-0x807 has been reserved
pnp: 00:03: ioport range 0x850-0x853 has been reserved
pnp: 00:03: ioport range 0x856-0x85f has been reserved
pnp: 00:03: ioport range 0x810-0x83f has been reserved
pnp: 00:03: ioport range 0x840-0x84f has been reserved
pnp: 00:03: ioport range 0xa00-0xa7f has been reserved
pnp: 00:03: ioport range 0xa80-0xaff has been reserved
pnp: 00:04: ioport range 0xf400-0xf4fe has been reserved
pnp: 00:09: ioport range 0x3f0-0x3f1 has been reserved
PCI: Bridge: 0000:00:01.0
  IO window: e000-efff
  MEM window: fc000000-feffffff
  PREFETCH window: 28000000-280fffff
PCI: Bus 2, cardbus bridge: 0000:00:03.0
  IO window: 00001000-000010ff
  IO window: 00001400-000014ff
  PREFETCH window: 20000000-21ffffff
  MEM window: 22000000-23ffffff
PCI: Bus 6, cardbus bridge: 0000:00:03.1
  IO window: 00001800-000018ff
  IO window: 00001c00-00001cff
  PREFETCH window: 24000000-25ffffff
  MEM window: 26000000-27ffffff
PCI: Enabling device 0000:00:03.0 (0000 -> 0003)
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
PCI: Enabling device 0000:00:03.1 (0000 -> 0003)
ACPI: PCI Interrupt 0000:00:03.1[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 8192 bind 4096)
TCP reno registered
audit: initializing netlink socket (disabled)
audit(1164223757.804:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
Limiting direct PCI/PCI transfers.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
EISA: Probing bus 0 at eisa.0
Cannot allocate resource for EISA slot 1
EISA: Detected 0 cards.
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 8
NET: Registered protocol family 20
Using IPI Shortcut mode
ACPI wakeup devices:
 LID PBTN PCI0 UAR1
ACPI: (supports S0 S1 S3 S4 S5)
Freeing unused kernel memory: 252k freed
input: AT Translated Set 2 keyboard as /class/input/input0
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: Thermal Zone [THM] (38 C)
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:07.2: UHCI Host Controller
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:07.2: irq 11, io base 0x0000dce0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 0000:00:07.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x0860-0x0867, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0x0868-0x086f, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
hda: IBM-DCXA-210000, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hda: max request size: 128KiB
hda: 19640880 sectors (10056 MB) w/420KiB Cache, CHS=19485/16/63, UDMA(33)
hda: cache flushes not supported
 hda: hda1 hda2 hda3 hda4
ReiserFS: hda3: found reiserfs format "3.6" with standard journal
ReiserFS: hda3: using ordered data mode
ReiserFS: hda3: journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda3: checking transaction log (hda3)
ReiserFS: hda3: Using r5 hash to sort names
input: PC Speaker as /class/input/input1
00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
Yenta: CardBus bridge found at 0000:00:03.0 [1028:00aa]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:03.0, mfunc 0x01261222, devctl 0x66
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
Linux agpgart interface v0.101 (c) Dave Jones
Linux video capture interface: v1.00
Yenta: ISA IRQ mask 0x0438, PCI irq 11
Socket status: 30000006
ACPI: PCI Interrupt 0000:00:03.1[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
Yenta: CardBus bridge found at 0000:00:03.1 [1028:00aa]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:03.1, mfunc 0x01261222, devctl 0x66
Real Time Clock Driver v1.12ac
Yenta: ISA IRQ mask 0x0438, PCI irq 11
Socket status: 30000010
agpgart: Detected an Intel 440BX Chipset.
agpgart: AGP aperture is 64M @ 0xf4000000
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
videodev: "Maestro radio" has no release callback. Please fix your driver for proper sysfs support, see http://lwn.net/Articles/36850/
maestro_radio: probe of 0000:00:08.0 failed with error -5
piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
input: ImPS/2 Generic Wheel Mouse as /class/input/input2
pccard: PCMCIA card inserted into slot 1
cs: IO port probe 0x100-0x4ff: excluding 0x170-0x177 0x370-0x37f
cs: IO port probe 0x800-0x8ff: clean.
cs: IO port probe 0xc00-0xcff: excluding 0xcf8-0xcff
cs: IO port probe 0xa00-0xaff: clean.
ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
cs: IO port probe 0x100-0x4ff: excluding 0x170-0x177 0x370-0x37f
cs: IO port probe 0x800-0x8ff: clean.
cs: IO port probe 0xc00-0xcff: excluding 0xcf8-0xcff
cs: IO port probe 0xa00-0xaff: clean.
cs: memory probe 0xa0000000-0xa0ffffff: clean.
pcmcia: registering new device pcmcia1.0
mice: PS/2 mouse device common for all mice
ts: Compaq touchscreen protocol output
es1968: clocking to 48000
Adding 1028152k swap on /dev/hda2.  Priority:-1 extents:1 across:1028152k
sb: Init: Starting Probe...
sb: Init: Done
arcnet loaded.
arcnet: COM20020 chipset support (by David Woodhouse et al.)
aci: busy_wait() time out.
es1371: version v0.32 time 16:18:58 Sep 13 2006
Intel 810 + AC97 Audio, version 1.01, 16:18:57 Sep 13 2006
device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel@redhat.com
VFS: Can't find ext3 filesystem on dev hda1.
VFS: Can't find ext3 filesystem on dev hda4.
pcmcia: Detected deprecated PCMCIA ioctl usage from process: discover.
pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools.
pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details.
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver

Kod:

debian:/home/uurwis# lspci
00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03)
00:01.0 PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03)
00:03.0 CardBus bridge: Texas Instruments PCI1225 (rev 01)
00:03.1 CardBus bridge: Texas Instruments PCI1225 (rev 01)
00:07.0 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 02)
00:07.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01)
00:07.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev 01)
00:07.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 03)
00:08.0 Multimedia audio controller: ESS Technology ES1978 Maestro 2E (rev 10)
01:00.0 VGA compatible controller: ATI Technologies Inc Rage Mobility P/M AGP 2x (rev 64)
debian:/home/uurwis#              





debian:/home/uurwis# lspcmcia
Socket 0 Bridge:        [yenta_cardbus]         (bus ID: 0000:00:03.0)
Socket 1 Bridge:        [yenta_cardbus]         (bus ID: 0000:00:03.1)
Socket 1 Device 0:      [-- no driver --]       (bus ID: 1.0)
debian:/home/uurwis#  

Uszek
uszek7@poczta.fm
GG #4444331
Linux Registered User: #307434

Offline

 

#4  2006-11-22 20:05:10

  bercik - Moderator Mamut

bercik
Moderator Mamut
Skąd: Warszawa
Zarejestrowany: 2006-09-23
Serwis

Re: Karta PCMCIA 3com i kernel 2.6.17

wartoby tez zobaczyc ifconfig -a (udev potrafi niekiedy kartom przypisywac "dziwne" numery)


"Wszyscy wiedzą, że czegoś zrobić nie można. Ale przypadkowo znajduje się jakiś nieuk, który tego nie wie. I on właśnie robi odkrycie." (A.Einstein)

Offline

 

#5  2006-11-22 20:29:35

  uszek - Członek DUG

uszek
Członek DUG
Skąd: Nisko
Zarejestrowany: 2004-06-25

Re: Karta PCMCIA 3com i kernel 2.6.17

Kod:

debian:/home/uurwis# ifconfig -a
lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:64 errors:0 dropped:0 overruns:0 frame:0
          TX packets:64 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:4060 (3.9 KiB)  TX bytes:4060 (3.9 KiB)

sit0      Link encap:IPv6-in-IPv4
          NOARP  MTU:1480  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

Uszek
uszek7@poczta.fm
GG #4444331
Linux Registered User: #307434

Offline

 

#6  2006-11-23 00:54:01

  bercik - Moderator Mamut

bercik
Moderator Mamut
Skąd: Warszawa
Zarejestrowany: 2006-09-23
Serwis

Re: Karta PCMCIA 3com i kernel 2.6.17

sproboj recznie zaladowac modol do obslugi tej karty ... bo moze sie to wiazac z tym ze (udev) jej nie rozpoznaje i nieladuje sterownika ...


"Wszyscy wiedzą, że czegoś zrobić nie można. Ale przypadkowo znajduje się jakiś nieuk, który tego nie wie. I on właśnie robi odkrycie." (A.Einstein)

Offline

 

#7  2006-11-23 10:04:35

  uszek - Członek DUG

uszek
Członek DUG
Skąd: Nisko
Zarejestrowany: 2004-06-25

Re: Karta PCMCIA 3com i kernel 2.6.17

Nic to nie pomaga sterowniki załadowane i dalej to samo


Uszek
uszek7@poczta.fm
GG #4444331
Linux Registered User: #307434

Offline

 

#8  2006-11-23 11:34:36

  Ryszard - Piwo DUG

Ryszard
Piwo DUG
Skąd: Zadupia
Zarejestrowany: 2006-06-30

Re: Karta PCMCIA 3com i kernel 2.6.17

Wejdz w kernela i zaladuj jako <M>
bedzie smigać lub zobacz czy nie masz zanaczonych więcej modułów i który znich może śię gryść


http://img196.imageshack.us/img196/3770/freebsde.jpg

Offline

 

#9  2006-11-23 16:04:56

  uszek - Członek DUG

uszek
Członek DUG
Skąd: Nisko
Zarejestrowany: 2004-06-25

Re: Karta PCMCIA 3com i kernel 2.6.17

cały czas łąduje jako moduły no ale to nic nie zmienia sprobuje kernela 2.6.17-2-686


Uszek
uszek7@poczta.fm
GG #4444331
Linux Registered User: #307434

Offline

 

#10  2006-11-23 17:14:15

  uszek - Członek DUG

uszek
Członek DUG
Skąd: Nisko
Zarejestrowany: 2004-06-25

Re: Karta PCMCIA 3com i kernel 2.6.17

lipa i juz


Uszek
uszek7@poczta.fm
GG #4444331
Linux Registered User: #307434

Offline

 

#11  2006-11-23 23:44:28

  Conio - Użytkownik

Conio
Użytkownik
Skąd: Gorlice suckz!
Zarejestrowany: 2005-09-20

Re: Karta PCMCIA 3com i kernel 2.6.17

ja mam ibmtp600e, i karte 3com megahertz na pcmcia, i powiem szczerze, ze karta jest wykrywana, i interfejs automatycznie konfigurowany juz w trakce instalacji deba, niezaleznie czy to 2.4 czy 2.6; i nawet mi do glowy nie przyszlo zeby cos kombinowac ze sterami.
Moze ten sprzet na ktorym to probojesz odpalic jest jakis trefny?

C.

Offline

 

#12  2006-11-24 09:54:11

  uszek - Członek DUG

uszek
Członek DUG
Skąd: Nisko
Zarejestrowany: 2004-06-25

Re: Karta PCMCIA 3com i kernel 2.6.17

no ale na 2.4 chodzi bez problemu zreszta zainstalowałem to z neta wiec szytsko pociagneło przez ta karte


Uszek
uszek7@poczta.fm
GG #4444331
Linux Registered User: #307434

Offline

 

#13  2006-12-30 13:43:03

  uszek - Członek DUG

uszek
Członek DUG
Skąd: Nisko
Zarejestrowany: 2004-06-25

Re: Karta PCMCIA 3com i kernel 2.6.17

Własnie probuje zasintalowa etcha niestety w laptopie nie posiadam cdromu tylko probuje zainstalowac z dyskietek no i lipa na 2.6 karta jest niewykrywalna
wybieram recznie sterownik 3c574_cs albo 3c589_cs i nic stoje w miejscu


Uszek
uszek7@poczta.fm
GG #4444331
Linux Registered User: #307434

Offline

 

Stopka forum

Powered by PunBB
© Copyright 2002–2005 Rickard Andersson
Możesz wyłączyć AdBlock — tu nie ma reklam ;-)