Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!
Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.
Użytkownik

Witam mam problem z moim radeonkiem... nie chce mi odpalić 3D
wpisuję fglrxinfo i dostaję:
display: :0.0 screen: 0
OpenGL vendor string: Mesa project: www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.2 (1.5 Mesa 6.4.1)
instaluje sterowniki z orginalnych producenta. przy wyłączonych iksach. pokazuje mi blad instalacji :
Message] Kernel Module : Trying to install a precompiled kernel module.
[Message] Kernel Module : Precompiled kernel module version mismatched.
[Error] Kernel Module : No kernel module build environment - please consult readme.
w pliku xorg.conf chyba wszystko jak powinno być ...
Section "ServerLayout"
InputDevice "Configured Mouse"
Identifier "Default Layout"
Screen "Default Screen" 0 0
InputDevice "Generic Keyboard"
EndSection
Section "Files"
# path to defoma fonts
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/X11R6/lib/X11/fonts/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/X11R6/lib/X11/fonts/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "pl"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/ttyS0"
Option "Protocol" "auto"
Option "Emulate3Buttons" "true"
EndSection
Section "Monitor"
Identifier "Generic Monitor"
HorizSync 28.0 - 57.0
VertRefresh 43.0 - 60.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Generic Video Card"
Driver "fglrx"
Option "Capabilities" "0x00000800"
Option "FSAAEnable" "on"
Option "StereoSyncEnable" "on"
Option "ForceMonitors" "crt1,notv"
Option "DesktopSetup" "horizontal"
Option "OverlayOnCRTC2" "1"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Generic Video Card"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1152x768" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1152x768" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1152x768" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1152x768" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1152x768" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1152x768" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
no i kilka logów z iksów
(II) Primary Device is: PCI 01:00:0 (II) ATI Proprietary Linux Driver Version Identifier:8.26.18 (II) ATI Proprietary Linux Driver Release Identifier: LGDr8.26g1 (II) ATI Proprietary Linux Driver Build Date: Jun 22 2006 12:50:04 (II) ATI Proprietary Linux Driver Build Information: autobuild-rel-r6-8.26.1-driver-lnx-275228 (WW) fglrx: No matching Device section for instance (BusID PCI:1:0:1) found (II) fglrx(0): PCI bus 1 card 0 func 0 (**) fglrx(0): Depth 24, (--) framebuffer bpp 32 (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps) (==) fglrx(0): Default visual is TrueColor (**) fglrx(0): Option "Capabilities" "0x00000800" (**) fglrx(0): Option "DesktopSetup" "horizontal" (**) fglrx(0): Option "ForceMonitors" "crt1,notv" (**) fglrx(0): Option "OverlayOnCRTC2" "1" (WW) fglrx(0): Option "StereoSyncEnable" requires an integer value (**) fglrx(0): Option "FSAAEnable" "on" (**) fglrx(0): Option "DPMS" (==) fglrx(0): RGB weight 888 (II) fglrx(0): Using 8 bits per RGB (8 bit DAC) (==) fglrx(0): Gamma Correction for I is 0x06419064 (==) fglrx(0): Gamma Correction for II is 0x06419064 (==) fglrx(0): Buffer Tiling is ON (II) Reloading /usr/lib/xorg/modules/linux/libdrm.so drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is -1, (No such device) drmOpenDevice: open result is -1, (No such device) drmOpenDevice: Open failed [drm] failed to load kernel module "fglrx" (WW) fglrx(0): Failed to open DRM connection (--) fglrx(0): VideoRAM: 131072 kByte, Type: DDR SGRAM / SDRAM (II) fglrx(0): AGP card detected (WW) fglrx(0): board is an unknown third party board, chipset is supported (**) fglrx(0): ForceMonitors Settings: 401 (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Reloading /usr/lib/xorg/modules/libddc.so (II) fglrx(0): Connected Display1: CRT on primary DAC (II) fglrx(0): Display1: No EDID information from DDC. (II) fglrx(0): Display1: Failed to get EDID information. (WW) fglrx(0): Specified desktop setup not supported: 10 (II) fglrx(0): Primary Controller - CRT on primary DAC [drm] failed to load kernel module "fglrx" (II) fglrx(0): [drm] drmOpen failed (EE) fglrx(0): DRIScreenInit failed! (WW) fglrx(0): *********************************************** (WW) fglrx(0): * DRI initialization failed! * (WW) fglrx(0): * (maybe driver kernel module missing or bad) * (WW) fglrx(0): * 2D acceleraton available (MMIO) * (WW) fglrx(0): * no 3D acceleration available * (WW) fglrx(0): ********************************************* *
Zdaję sobie sprawę że to cos z jądrem ale nie wiem jak to naprawić ....
proszę o pomoc
Offline


Członek DUG



Ten błąd oznacza tyle, że gotowy moduł co jest w sterach ati nie pasuje do twojego kernela. I nie można zbudować nowego modułu, bo nie masz odpowiedniego środowiska. Zainstaluj sobie gcc i kernel-headers (czy tam linux-headers) dla twojego jaja. Może jeszcze coś - sprawdź zależności jak paczkę ze sterów ati zrobisz.

Offline

Członek DUG
Użytkownik

całe jądro ? zmienić jądro?
Offline


Członek DUG



wariat odinstaluj te stery od ati /etc/fglrx/uninstall.sh bodajże odpal. Potem w faq masz mój artykuł jak zapodać stery z repo debiana unstable w testingu - mi poszło bez problemów. Samo paczki i kernel-headers sobie nawet zassało ;P

Offline
Użytkownik

misiu ? no norlamnie jesteś wielki :D świetny sposób na 3D bardzo prosty i szybki zero niedomówień.
Offline
Użytkownik

działa dzieki za pomoc :D:D pomogło nowe jądro... tylko przydało by się kiedyś samemu skompilować :/ ...trudne to....
Offline


Członek DUG



Nie ma sprawy wariacie ;) Ja od 2 tygodni jestem linuksiarzem dopiero ;P Jajo chciałem sobie skompilować własne. 3h spędziłem na czytaniu helpa do każdej pierdułki w menuconfig. A i tak wyszło mi Kernel Panic ;P Na razie zostawiam to na potem, jak już w wiedzę i doświadczenia będę bogatszy.
Koniec wątku.
Over and out!

Offline
Użytkownik

też to wczoraj zobczyłem .... kernel panic.... tyle że ja spędziłem całydzień robiąc to :/
Offline


Członek DUG



Może załóżmy sobie podklub KKP - Klub Kenrel Panic? ;P I takie noobki jak my będą tam się chwalić co skopali, żeby inni na ich błędach się nauczyli. Ja z tego co się dowedziałem, to nie wkompilowałem chipsetu i systemów plików na stałe. Ale nie mam siły jeszcze raz tego konfigurować. Dobrze, że mam laptopa i jak raz zrobię, to potem nie będę miał problemu, że sprzęt zmieniłem :D

Offline






Ojciec Założyciel
Hm, pociągnę temat dalej. Odpaliłem akcelerację 3D i ....komp teoretycznie normalnie pracuje. Jak włączę coś co wymaga alceleracji to normalna zwiecha - komp wisi (działa tylko kursor myszy) i pomaga twardy reset.
wystarczy nawet polecenie glxgears.
akceleracja włączona (chyba)? bo:
bodzio@domek:~$ fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9200 Series DDR Generic
OpenGL version string: 1.3.1080 (X4.3.0-8.26.6)
jak trzeba jakieś logi to załączę, ale w nich nic nie ma, wsio ok
Offline


Członek DUG



Ja już nie pomogę niestety, za zielony jestem ;P To co wiedziałem, to w faq i tutaj napisałem :D

Offline
Użytkownik

Bodzio, może w kernelu masz za dużo? Tutaj masz, co powinno być wkompilowane, a co nie:
http://www.stanchina.net/~flavio/debian/fglrx-insta … #requirements
Offline



Członek DUG
No i mam taki problem.
glxgeras -printfps wypluwa mi taki wynik
567 frames in 5.8 seconds = 97.667 FPS 840 frames in 5.9 seconds = 141.846 FPS 840 frames in 5.5 seconds = 151.904 FPS 840 frames in 5.6 seconds = 150.199 FPS 840 frames in 5.5 seconds = 153.368 FPS 840 frames in 5.6 seconds = 148.768 FPS 840 frames in 5.5 seconds = 151.650 FPS 840 frames in 5.6 seconds = 149.386 FPS 840 frames in 5.5 seconds = 152.342 FPS 840 frames in 5.5 seconds = 151.786 FPS 840 frames in 5.5 seconds = 152.125 FPS 840 frames in 5.5 seconds = 151.723 FPS
Zębatki prawie się nieobracają. To jest co powyżej dobrze czy źle?
Na poprzednim jajcu ( 2.6.15) ppracer śmigał, aż miło. Teraz mam stop klatki. Podobnie z nexuizem
ale miałem tego starszego xorga i starsze stery od nvidii.
Tutaj mam xorg.cong ( to co najważniejsze chyba)
S
ection "Module"
Load "bitmap"
Load "dbe"
Load "ddc"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "record"
Load "type1"
Load "v4l"
Load "vbe"
EndSection
Section "Device"
Identifier "NVIDIA Corporation NV11 [GeForce2 MX/MX 400]"
Driver "nvidia"
Option "UseEDID" "false"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "NVIDIA Corporation NV11 [GeForce2 MX/MX 400]"
Monitor "Liteon"
DefaultDepth 24
Option "UseFBDev" "false"
SubSection "Display"
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
******
12.07.06
To chyba była wina jajca, bo teraz mam skompilowane przez siebie 2.6.17 i w glxgears się już zębatki obracają aż miło. Mam po 350 fps. Łał.
Szkoda tylko, iż Nexuiza skasowałem, ale i tak nie powinien działać, bo nie spełniam minimalnych wymagań sprzętowych.
He, warto sobie kompilować jajko.
Offline