Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!

Ogłoszenie

Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.

Strony: 1

 

#1  2020-09-07 14:08:24

  asm - Użytkownik

asm
Użytkownik
Zarejestrowany: 2020-09-07

Pomoc przy instalacji grafiki ATI Radeon X300 na komputerze biurowym

Witam,
Linuxa dopiero od niedawna zaczynam się uczyć, mam przed sobą komputer biurowy HP 8200 SFF, to ma być komputer do pracy, póki co jest do nauki Linuxa

Windows 7 na tym działał perfekcyjnie i bardzo płynnie, działałby nadal gdyby go nie uśmiercili

Obecnie zainstalowany jest Debian 10.5 oraz środowisko graficzne Cinammon

problem mam następujący:

1) nie startował instalator graficzny, ale zainstalowałem przy pomocy zwykłego instalatora
2) Przy uruchomieniu krzyczał, że failed to load radeon/R300_cp.bin
3) Ponadto środowisko graficzne zgłaszało, że jest na renderowaniu softwareowym i wydajność może być niska
4) Zrobiłem więc coś takiego: apt-get install firmware-linux firmware-linux-nonfree
5) Zainstalowało się i niby działa ale najlepsze jest to, że teraz działa gorzej niż na tym renderowaniu softwareowym
6) Chodzi o to, że kiepsko działa pulpit, przesuwanie okien, zmiana rozmiaru otwieranie, wszystko strasznie szarpie, laguje i ogólnie wrażenie jest takie jakby grafika nie wyrabiała z wyświetlaniem pulpitu
7) Chciałem pokombinować z ustawieniami graficznymi zwłaszcza sprawdzić czy winny nie jest jakiś vsync, ale okazało się że to się robi za pomocą pliku xorg.conf a tego pliku nie mam w /etc/X11
8) Próbowałem go wygenerować zgodnie z instrukcją Xorg -configure ale wygenerowany plik nie działa
9) Przy robieniu -configure wyświetla coś na ten temat, że drm report modesetting isn't supported i że się zakończyło błędem
10) Powstaje co prawda jakiś plik xorg.conf.new ale jak go wrzucam do /etc/X11/xorg.conf to po ponownym uruchomieniu grafika nie startuje, mam czarny ekran

/var/log/Xorg.0.log

Kod:

[    18.005] 
X.Org X Server 1.20.4
X Protocol Version 11, Revision 0
[    18.005] Build Operating System: Linux 4.19.0-10-amd64 x86_64 Debian
[    18.005] Current Operating System: Linux cont4 4.19.0-10-amd64 #1 SMP Debian 4.19.132-1 (2020-07-24) x86_64
[    18.005] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-10-amd64 root=UUID=f829b2bd-fa26-4bc3-8784-26e9f1d07193 ro quiet
[    18.006] Build Date: 27 August 2020  08:51:48AM
[    18.006] xorg-server 2:1.20.4-1+deb10u1 (https://www.debian.org/support) 
[    18.006] Current version of pixman: 0.36.0
[    18.006]     Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[    18.006] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    18.006] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Sep  7 12:57:59 2020
[    18.083] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    18.137] (==) No Layout section.  Using the first Screen section.
[    18.137] (==) No screen section available. Using defaults.
[    18.137] (**) |-->Screen "Default Screen Section" (0)
[    18.137] (**) |   |-->Monitor "<default monitor>"
[    18.142] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
[    18.142] (==) Automatically adding devices
[    18.142] (==) Automatically enabling devices
[    18.142] (==) Automatically adding GPU devices
[    18.142] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    18.189] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    18.189]     Entry deleted from font path.
[    18.199] (==) FontPath set to:
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/100dpi/:unscaled,
    /usr/share/fonts/X11/75dpi/:unscaled,
    /usr/share/fonts/X11/Type1,
    /usr/share/fonts/X11/100dpi,
    /usr/share/fonts/X11/75dpi,
    built-ins
[    18.199] (==) ModulePath set to "/usr/lib/xorg/modules"
[    18.199] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
[    18.199] (II) Loader magic: 0x559734b60e20
[    18.199] (II) Module ABI versions:
[    18.199]     X.Org ANSI C Emulation: 0.4
[    18.199]     X.Org Video Driver: 24.0
[    18.199]     X.Org XInput driver : 24.1
[    18.199]     X.Org Server Extension : 10.0
[    18.200] (++) using VT number 7

[    18.200] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[    18.201] (II) xfree86: Adding drm device (/dev/dri/card0)
[    18.204] (--) PCI:*(1@0:0:0) 1002:5b62:1002:0f02 rev 0, Mem @ 0xf0000000/134217728, 0xfe630000/65536, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072
[    18.204] (--) PCI: (1@0:0:1) 1002:5b72:1002:0f03 rev 0, Mem @ 0xfe620000/65536
[    18.204] (II) LoadModule: "glx"
[    18.217] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    18.419] (II) Module glx: vendor="X.Org Foundation"
[    18.419]     compiled for 1.20.4, module version = 1.0.0
[    18.419]     ABI class: X.Org Server Extension, version 10.0
[    18.419] (II) Applying OutputClass "Radeon" to /dev/dri/card0
[    18.419]     loading driver: radeon
[    18.419] (==) Matched radeon as autoconfigured driver 0
[    18.419] (==) Matched ati as autoconfigured driver 1
[    18.419] (==) Matched modesetting as autoconfigured driver 2
[    18.419] (==) Matched fbdev as autoconfigured driver 3
[    18.419] (==) Matched vesa as autoconfigured driver 4
[    18.419] (==) Assigned the driver to the xf86ConfigLayout
[    18.419] (II) LoadModule: "radeon"
[    18.419] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[    18.520] (II) Module radeon: vendor="X.Org Foundation"
[    18.520]     compiled for 1.20.4, module version = 19.0.1
[    18.520]     Module class: X.Org Video Driver
[    18.520]     ABI class: X.Org Video Driver, version 24.0
[    18.520] (II) LoadModule: "ati"
[    18.520] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[    18.533] (II) Module ati: vendor="X.Org Foundation"
[    18.533]     compiled for 1.20.4, module version = 19.0.1
[    18.533]     Module class: X.Org Video Driver
[    18.533]     ABI class: X.Org Video Driver, version 24.0
[    18.533] (II) LoadModule: "modesetting"
[    18.533] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    18.540] (II) Module modesetting: vendor="X.Org Foundation"
[    18.540]     compiled for 1.20.4, module version = 1.20.4
[    18.540]     Module class: X.Org Video Driver
[    18.540]     ABI class: X.Org Video Driver, version 24.0
[    18.540] (II) LoadModule: "fbdev"
[    18.540] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    18.572] (II) Module fbdev: vendor="X.Org Foundation"
[    18.572]     compiled for 1.20.0, module version = 0.5.0
[    18.572]     Module class: X.Org Video Driver
[    18.572]     ABI class: X.Org Video Driver, version 24.0
[    18.572] (II) LoadModule: "vesa"
[    18.572] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    18.572] (II) Module vesa: vendor="X.Org Foundation"
[    18.572]     compiled for 1.20.1, module version = 2.4.0
[    18.572]     Module class: X.Org Video Driver
[    18.572]     ABI class: X.Org Video Driver, version 24.0
[    18.573] (II) RADEON: Driver for ATI/AMD Radeon chipsets:
    ATI Radeon Mobility X600 (M24), ATI FireMV 2400,
    ATI Radeon Mobility X300 (M24), ATI FireGL M24 GL,
    ATI Radeon X600 (RV380), ATI FireGL V3200 (RV380),
    ATI Radeon IGP320 (A3), ATI Radeon IGP330/340/350 (A4),
    ATI Radeon 9500, ATI Radeon 9600TX, ATI FireGL Z1, ATI Radeon 9800SE,
    ATI Radeon 9800, ATI FireGL X2, ATI Radeon 9600, ATI Radeon 9600SE,
    ATI Radeon 9600XT, ATI FireGL T2, ATI Radeon 9650, ATI FireGL RV360,
    ATI Radeon 7000 IGP (A4+), ATI Radeon 8500 AIW,
    ATI Radeon IGP320M (U1), ATI Radeon IGP330M/340M/350M (U2),
    ATI Radeon Mobility 7000 IGP, ATI Radeon 9000/PRO, ATI Radeon 9000,
    ATI Radeon X800 (R420), ATI Radeon X800PRO (R420),
    ATI Radeon X800SE (R420), ATI FireGL X3 (R420),
    ATI Radeon Mobility 9800 (M18), ATI Radeon X800 SE (R420),
    ATI Radeon X800XT (R420), ATI Radeon X800 VE (R420),
    ATI Radeon X850 (R480), ATI Radeon X850 XT (R480),
    ATI Radeon X850 SE (R480), ATI Radeon X850 PRO (R480),
    ATI Radeon X850 XT PE (R480), ATI Radeon Mobility M7,
    ATI Mobility FireGL 7800 M7, ATI Radeon Mobility M6,
    ATI FireGL Mobility 9000 (M9), ATI Radeon Mobility 9000 (M9),
    ATI Radeon 9700 Pro, ATI Radeon 9700/9500Pro, ATI FireGL X1,
    ATI Radeon 9800PRO, ATI Radeon 9800XT,
    ATI Radeon Mobility 9600/9700 (M10/M11),
    ATI Radeon Mobility 9600 (M10), ATI Radeon Mobility 9600 (M11),
    ATI FireGL Mobility T2 (M10), ATI FireGL Mobility T2e (M11),
    ATI Radeon, ATI FireGL 8700/8800, ATI Radeon 8500, ATI Radeon 9100,
    ATI Radeon 7500, ATI Radeon VE/7000, ATI ES1000,
    ATI Radeon Mobility X300 (M22), ATI Radeon Mobility X600 SE (M24C),
    ATI FireGL M22 GL, ATI Radeon X800 (R423), ATI Radeon X800PRO (R423),
    ATI Radeon X800LE (R423), ATI Radeon X800SE (R423),
    ATI Radeon X800 XTP (R430), ATI Radeon X800 XL (R430),
    ATI Radeon X800 SE (R430), ATI Radeon X800 (R430),
    ATI FireGL V7100 (R423), ATI FireGL V5100 (R423),
    ATI FireGL unknown (R423), ATI Mobility FireGL V5000 (M26),
    ATI Mobility Radeon X700 XL (M26), ATI Mobility Radeon X700 (M26),
    ATI Radeon X550XTX, ATI Radeon 9100 IGP (A5),
    ATI Radeon Mobility 9100 IGP (U3), ATI Radeon XPRESS 200,
    ATI Radeon XPRESS 200M, ATI Radeon 9250, ATI Radeon 9200,
    ATI Radeon 9200SE, ATI FireMV 2200, ATI Radeon X300 (RV370),
    ATI Radeon X600 (RV370), ATI Radeon X550 (RV370),
    ATI FireGL V3100 (RV370), ATI FireMV 2200 PCIE (RV370),
    ATI Radeon Mobility 9200 (M9+), ATI Mobility Radeon X800 XT (M28),
    ATI Mobility FireGL V5100 (M28), ATI Mobility Radeon X800 (M28),
    ATI Radeon X850, ATI unknown Radeon / FireGL (R480),
    ATI Radeon X800XT (R423), ATI FireGL V5000 (RV410),
    ATI Radeon X700 XT (RV410), ATI Radeon X700 PRO (RV410),
    ATI Radeon X700 SE (RV410), ATI Radeon X700 (RV410),
    ATI Radeon X1800, ATI Mobility Radeon X1800 XT,
    ATI Mobility Radeon X1800, ATI Mobility FireGL V7200,
    ATI FireGL V7200, ATI FireGL V5300, ATI Mobility FireGL V7100,
    ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
    ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
    ATI Mobility Radeon X1400, ATI Radeon X1550 64-bit,
    ATI Mobility Radeon X1300, ATI Radeon X1300, ATI FireGL V3300,
    ATI FireGL V3350, ATI Mobility Radeon X1450,
    ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
    ATI FireMV 2250, ATI Radeon X1650, ATI Mobility FireGL V5200,
    ATI Mobility Radeon X1600, ATI Radeon X1300 XT/X1600 Pro,
    ATI FireGL V3400, ATI Mobility FireGL V5250,
    ATI Mobility Radeon X1700, ATI Mobility Radeon X1700 XT,
    ATI FireGL V5200, ATI Radeon X2300HD, ATI Mobility Radeon HD 2300,
    ATI Radeon X1950, ATI Radeon X1900, ATI AMD Stream Processor,
    ATI RV560, ATI Mobility Radeon X1900, ATI Radeon X1950 GT, ATI RV570,
    ATI FireGL V7400, ATI Radeon 9100 PRO IGP,
    ATI Radeon Mobility 9200 IGP, ATI Radeon X1200, ATI RS740,
    ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro,
    ATI Radeon HD 2900 GT, ATI FireGL V8650, ATI FireGL V8600,
    ATI FireGL V7600, ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
    ATI Radeon HD 4850 x2, ATI FirePro V8750 (FireGL),
    ATI FirePro V7760 (FireGL), ATI Mobility RADEON HD 4850,
    ATI Mobility RADEON HD 4850 X2, ATI FirePro RV770,
    AMD FireStream 9270, AMD FireStream 9250, ATI FirePro V8700 (FireGL),
    ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
    ATI FirePro M7750, ATI M98, ATI Mobility Radeon HD 4650,
    ATI Radeon RV730 (AGP), ATI Mobility Radeon HD 4670,
    ATI FirePro M5750, ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
    ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
    ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
    ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
    ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
    ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI RV610,
    ATI Radeon HD 2400 XT, ATI Radeon HD 2400 Pro,
    ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000, ATI Radeon HD 2350,
    ATI Mobility Radeon HD 2400 XT, ATI Mobility Radeon HD 2400,
    ATI RADEON E2400, ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
    ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
    ATI Mobility Radeon HD 3850 X2, ATI Mobility Radeon HD 3870,
    ATI Mobility Radeon HD 3870 X2, ATI Radeon HD3870 X2,
    ATI FireGL V7700, ATI Radeon HD3690, AMD Firestream 9170,
    ATI Radeon HD 4550, ATI Radeon RV710, ATI Radeon HD 4350,
    ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series,
    ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
    ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
    ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
    ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
    ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
    ATI FireGL V3600, ATI Radeon HD 2600 LE,
    ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
    ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
    ATI Radeon HD 3450, ATI Radeon HD 3430, ATI FirePro V3700,
    ATI FireMV 2450, ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
    ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
    ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
    ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
    ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
    ATI Radeon HD 3300 Graphics, ATI Radeon 3000 Graphics, SUMO, SUMO2,
    ATI Radeon HD 4200, ATI Radeon 4100, ATI Mobility Radeon HD 4200,
    ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
    AMD Radeon HD 6310 Graphics, AMD Radeon HD 6250 Graphics,
    AMD Radeon HD 6300 Series Graphics,
    AMD Radeon HD 6200 Series Graphics, PALM, CYPRESS,
    ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
    AMD Firestream 9350, ATI Radeon HD 5800 Series,
    ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
    ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
    ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
    ATI Radeon HD 5670, ATI Radeon HD 5570, ATI Radeon HD 5500 Series,
    REDWOOD, ATI Mobility Radeon Graphics, CEDAR, ATI FirePro 2270,
    ATI Radeon HD 5450, CAYMAN, AMD Radeon HD 6900 Series,
    AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series, BARTS,
    AMD Radeon HD 6800 Series, AMD Radeon HD 6700 Series, TURKS, CAICOS,
    ARUBA, TAHITI, PITCAIRN, VERDE, OLAND, HAINAN, BONAIRE, KABINI,
    MULLINS, KAVERI, HAWAII
[    18.576] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    18.576] (II) FBDEV: driver for framebuffer: fbdev
[    18.576] (II) VESA: driver for VESA chipsets: vesa
[    18.583] (II) [KMS] Kernel modesetting enabled.
[    18.583] (WW) Falling back to old probe method for modesetting
[    18.583] (WW) Falling back to old probe method for fbdev
[    18.583] (II) Loading sub module "fbdevhw"
[    18.583] (II) LoadModule: "fbdevhw"
[    18.667] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    18.689] (II) Module fbdevhw: vendor="X.Org Foundation"
[    18.689]     compiled for 1.20.4, module version = 0.0.2
[    18.689]     ABI class: X.Org Video Driver, version 24.0
[    18.699] (II) RADEON(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
[    18.699] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[    18.699] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[    18.699] (==) RADEON(0): Default visual is TrueColor
[    18.699] (==) RADEON(0): RGB weight 888
[    18.699] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[    18.699] (--) RADEON(0): Chipset: "ATI Radeon X600 (RV370)" (ChipID = 0x5b62)
[    18.699] (II) Loading sub module "fb"
[    18.699] (II) LoadModule: "fb"
[    18.699] (II) Loading /usr/lib/xorg/modules/libfb.so
[    18.708] (II) Module fb: vendor="X.Org Foundation"
[    18.708]     compiled for 1.20.4, module version = 1.0.0
[    18.708]     ABI class: X.Org ANSI C Emulation, version 0.4
[    18.708] (II) Loading sub module "dri2"
[    18.708] (II) LoadModule: "dri2"
[    18.708] (II) Module "dri2" already built-in
[    18.708] (II) Loading sub module "exa"
[    18.708] (II) LoadModule: "exa"
[    18.708] (II) Loading /usr/lib/xorg/modules/libexa.so
[    18.719] (II) Module exa: vendor="X.Org Foundation"
[    18.719]     compiled for 1.20.4, module version = 2.6.0
[    18.719]     ABI class: X.Org Video Driver, version 24.0
[    18.719] (II) RADEON(0): KMS Color Tiling: enabled
[    18.719] (II) RADEON(0): KMS Color Tiling 2D: disabled
[    18.719] (==) RADEON(0): TearFree property default: auto
[    18.719] (II) RADEON(0): KMS Pageflipping: enabled
[    18.719] (II) RADEON(0): SwapBuffers wait for vsync: enabled
[    18.750] (II) RADEON(0): Output DVI-0 has no monitor section
[    18.760] (II) RADEON(0): Output S-video has no monitor section
[    18.790] (II) RADEON(0): EDID for output DVI-0
[    18.790] (II) RADEON(0): Manufacturer: DEL  Model: a04b  Serial#: 860304969
[    18.790] (II) RADEON(0): Year: 2010  Week: 44
[    18.790] (II) RADEON(0): EDID Version: 1.3
[    18.790] (II) RADEON(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V
[    18.790] (II) RADEON(0): Sync:  Separate  Composite  SyncOnGreen
[    18.790] (II) RADEON(0): Max Image Size [cm]: horiz.: 38  vert.: 30
[    18.790] (II) RADEON(0): Gamma: 2.20
[    18.790] (II) RADEON(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[    18.790] (II) RADEON(0): Default color space is primary color space
[    18.790] (II) RADEON(0): First detailed timing is preferred mode
[    18.790] (II) RADEON(0): redX: 0.640 redY: 0.330   greenX: 0.300 greenY: 0.600
[    18.791] (II) RADEON(0): blueX: 0.150 blueY: 0.060   whiteX: 0.313 whiteY: 0.329
[    18.791] (II) RADEON(0): Supported established timings:
[    18.791] (II) RADEON(0): 720x400@70Hz
[    18.791] (II) RADEON(0): 640x480@60Hz
[    18.791] (II) RADEON(0): 640x480@75Hz
[    18.791] (II) RADEON(0): 800x600@60Hz
[    18.791] (II) RADEON(0): 800x600@75Hz
[    18.791] (II) RADEON(0): 1024x768@60Hz
[    18.791] (II) RADEON(0): 1024x768@75Hz
[    18.791] (II) RADEON(0): 1280x1024@75Hz
[    18.791] (II) RADEON(0): Manufacturer's mask: 0
[    18.791] (II) RADEON(0): Supported standard timings:
[    18.791] (II) RADEON(0): #0: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[    18.791] (II) RADEON(0): #1: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    18.791] (II) RADEON(0): Supported detailed timing:
[    18.791] (II) RADEON(0): clock: 108.0 MHz   Image Size:  376 x 301 mm
[    18.791] (II) RADEON(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0
[    18.791] (II) RADEON(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
[    18.791] (II) RADEON(0): Serial No: J388N0AO3G6I
[    18.791] (II) RADEON(0): Monitor name: DELL E190S
[    18.791] (II) RADEON(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 81 kHz, PixClock max 145 MHz
[    18.791] (II) RADEON(0): EDID (in hex):
[    18.791] (II) RADEON(0):     00ffffffffffff0010ac4ba049364733
[    18.791] (II) RADEON(0):     2c1401030e261e78eeee95a3544c9926
[    18.791] (II) RADEON(0):     0f5054a54b00714f8180010101010101
[    18.791] (II) RADEON(0):     010101010101302a009851002a403070
[    18.791] (II) RADEON(0):     1300782d1100001e000000ff004a3338
[    18.791] (II) RADEON(0):     384e30414f334736490a000000fc0044
[    18.791] (II) RADEON(0):     454c4c2045313930530a2020000000fd
[    18.791] (II) RADEON(0):     00384c1e510e000a20202020202000c3
[    18.791] (II) RADEON(0): Printing probed modes for output DVI-0
[    18.791] (II) RADEON(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[    18.791] (II) RADEON(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    18.791] (II) RADEON(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    18.791] (II) RADEON(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    18.791] (II) RADEON(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    18.791] (II) RADEON(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    18.791] (II) RADEON(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    18.791] (II) RADEON(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    18.791] (II) RADEON(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    18.791] (II) RADEON(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    18.801] (II) RADEON(0): EDID for output S-video
[    18.801] (II) RADEON(0): Output DVI-0 connected
[    18.801] (II) RADEON(0): Output S-video disconnected
[    18.801] (II) RADEON(0): Using exact sizes for initial modes
[    18.801] (II) RADEON(0): Output DVI-0 using initial mode 1280x1024 +0+0
[    18.801] (II) RADEON(0): mem size init: gart size :1fdff000 vram size: s:8000000 visible:7a40000
[    18.801] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
[    18.801] (==) RADEON(0): DPI set to (96, 96)
[    18.801] (==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
[    18.801] (II) Loading sub module "ramdac"
[    18.801] (II) LoadModule: "ramdac"
[    18.801] (II) Module "ramdac" already built-in
[    18.801] (II) UnloadModule: "modesetting"
[    18.801] (II) Unloading modesetting
[    18.801] (II) UnloadModule: "fbdev"
[    18.801] (II) Unloading fbdev
[    18.801] (II) UnloadSubModule: "fbdevhw"
[    18.801] (II) Unloading fbdevhw
[    18.801] (II) UnloadModule: "vesa"
[    18.801] (II) Unloading vesa
[    18.824] (II) RADEON(0): [DRI2] Setup complete
[    18.824] (II) RADEON(0): [DRI2]   DRI driver: r300
[    18.824] (II) RADEON(0): [DRI2]   VDPAU driver: r300
[    18.824] (II) RADEON(0): Front buffer size: 5120K
[    18.824] (II) RADEON(0): VRAM usage limit set to 108028K
[    18.834] (==) RADEON(0): DRI3 disabled
[    18.834] (==) RADEON(0): Backing store enabled
[    18.834] (II) RADEON(0): Direct rendering enabled
[    18.834] (II) RADEON(0): Render acceleration enabled for R300/R400/R500 type cards.
[    18.834] (II) EXA(0): Driver allocated offscreen pixmaps
[    18.834] (II) EXA(0): Driver registered support for the following operations:
[    18.834] (II)         Solid
[    18.834] (II)         Copy
[    18.834] (II)         Composite (RENDER acceleration)
[    18.834] (II)         UploadToScreen
[    18.834] (II)         DownloadFromScreen
[    18.834] (II) RADEON(0): Acceleration enabled
[    18.834] (==) RADEON(0): DPMS enabled
[    18.834] (==) RADEON(0): Silken mouse enabled
[    18.834] (II) RADEON(0): Set up textured video
[    18.834] (II) RADEON(0): [XvMC] Associated with Radeon Textured Video.
[    18.834] (II) RADEON(0): [XvMC] Extension initialized.
[    18.835] (II) Initializing extension Generic Event Extension
[    18.835] (II) Initializing extension SHAPE
[    18.836] (II) Initializing extension MIT-SHM
[    18.836] (II) Initializing extension XInputExtension
[    18.836] (II) Initializing extension XTEST
[    18.836] (II) Initializing extension BIG-REQUESTS
[    18.837] (II) Initializing extension SYNC
[    18.837] (II) Initializing extension XKEYBOARD
[    18.837] (II) Initializing extension XC-MISC
[    18.837] (II) Initializing extension SECURITY
[    18.837] (II) Initializing extension XFIXES
[    18.837] (II) Initializing extension RENDER
[    18.837] (II) Initializing extension RANDR
[    18.838] (II) Initializing extension COMPOSITE
[    18.838] (II) Initializing extension DAMAGE
[    18.838] (II) Initializing extension MIT-SCREEN-SAVER
[    18.838] (II) Initializing extension DOUBLE-BUFFER
[    18.838] (II) Initializing extension RECORD
[    18.838] (II) Initializing extension DPMS
[    18.838] (II) Initializing extension Present
[    18.839] (II) Initializing extension DRI3
[    18.839] (II) Initializing extension X-Resource
[    18.839] (II) Initializing extension XVideo
[    18.839] (II) Initializing extension XVideo-MotionCompensation
[    18.839] (II) Initializing extension SELinux
[    18.839] (II) SELinux: Disabled on system
[    18.839] (II) Initializing extension GLX
[    20.039] (II) AIGLX: Loaded and initialized r300
[    20.039] (II) GLX: Initialized DRI2 GL provider for screen 0
[    20.039] (II) Initializing extension XFree86-VidModeExtension
[    20.040] (II) Initializing extension XFree86-DGA
[    20.040] (II) Initializing extension XFree86-DRI
[    20.040] (II) Initializing extension DRI2
[    20.040] (II) RADEON(0): Setting screen physical size to 338 x 270
[    20.321] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    20.322] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    20.322] (II) LoadModule: "libinput"
[    20.322] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    20.371] (II) Module libinput: vendor="X.Org Foundation"
[    20.371]     compiled for 1.20.4, module version = 0.28.2
[    20.371]     Module class: X.Org XInput Driver
[    20.371]     ABI class: X.Org XInput driver, version 24.1
[    20.371] (II) Using input driver 'libinput' for 'Power Button'
[    20.371] (**) Power Button: always reports core events
[    20.371] (**) Option "Device" "/dev/input/event1"
[    20.371] (**) Option "_source" "server/udev"
[    20.417] (II) event1  - Power Button: is tagged by udev as: Keyboard
[    20.417] (II) event1  - Power Button: device is a keyboard
[    20.418] (II) event1  - Power Button: device removed
[    20.432] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event1"
[    20.432] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    20.432] (**) Option "xkb_model" "pc105"
[    20.432] (**) Option "xkb_layout" "pl"
[    20.457] (II) event1  - Power Button: is tagged by udev as: Keyboard
[    20.457] (II) event1  - Power Button: device is a keyboard
[    20.458] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    20.458] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    20.458] (II) Using input driver 'libinput' for 'Power Button'
[    20.458] (**) Power Button: always reports core events
[    20.458] (**) Option "Device" "/dev/input/event0"
[    20.458] (**) Option "_source" "server/udev"
[    20.459] (II) event0  - Power Button: is tagged by udev as: Keyboard
[    20.459] (II) event0  - Power Button: device is a keyboard
[    20.459] (II) event0  - Power Button: device removed
[    20.476] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event0"
[    20.476] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    20.476] (**) Option "xkb_model" "pc105"
[    20.476] (**) Option "xkb_layout" "pl"
[    20.477] (II) event0  - Power Button: is tagged by udev as: Keyboard
[    20.477] (II) event0  - Power Button: device is a keyboard
[    20.479] (II) config/udev: Adding input device SEM USB Keyboard (/dev/input/event2)
[    20.479] (**) SEM USB Keyboard: Applying InputClass "libinput keyboard catchall"
[    20.479] (II) Using input driver 'libinput' for 'SEM USB Keyboard'
[    20.479] (**) SEM USB Keyboard: always reports core events
[    20.479] (**) Option "Device" "/dev/input/event2"
[    20.479] (**) Option "_source" "server/udev"
[    20.481] (II) event2  - SEM USB Keyboard: is tagged by udev as: Keyboard
[    20.481] (II) event2  - SEM USB Keyboard: device is a keyboard
[    20.481] (II) event2  - SEM USB Keyboard: device removed
[    20.500] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/0003:1A2C:0E24.0001/input/input5/event2"
[    20.500] (II) XINPUT: Adding extended input device "SEM USB Keyboard" (type: KEYBOARD, id 8)
[    20.500] (**) Option "xkb_model" "pc105"
[    20.500] (**) Option "xkb_layout" "pl"
[    20.502] (II) event2  - SEM USB Keyboard: is tagged by udev as: Keyboard
[    20.502] (II) event2  - SEM USB Keyboard: device is a keyboard
[    20.504] (II) config/udev: Adding input device SEM USB Keyboard Consumer Control (/dev/input/event3)
[    20.504] (**) SEM USB Keyboard Consumer Control: Applying InputClass "libinput keyboard catchall"
[    20.504] (II) Using input driver 'libinput' for 'SEM USB Keyboard Consumer Control'
[    20.504] (**) SEM USB Keyboard Consumer Control: always reports core events
[    20.504] (**) Option "Device" "/dev/input/event3"
[    20.504] (**) Option "_source" "server/udev"
[    20.506] (II) event3  - SEM USB Keyboard Consumer Control: is tagged by udev as: Keyboard
[    20.506] (II) event3  - SEM USB Keyboard Consumer Control: device is a keyboard
[    20.506] (II) event3  - SEM USB Keyboard Consumer Control: device removed
[    20.524] (II) libinput: SEM USB Keyboard Consumer Control: needs a virtual subdevice
[    20.524] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.1/0003:1A2C:0E24.0002/input/input6/event3"
[    20.524] (II) XINPUT: Adding extended input device "SEM USB Keyboard Consumer Control" (type: MOUSE, id 9)
[    20.524] (**) Option "AccelerationScheme" "none"
[    20.524] (**) SEM USB Keyboard Consumer Control: (accel) selected scheme none/0
[    20.524] (**) SEM USB Keyboard Consumer Control: (accel) acceleration factor: 2.000
[    20.524] (**) SEM USB Keyboard Consumer Control: (accel) acceleration threshold: 4
[    20.526] (II) event3  - SEM USB Keyboard Consumer Control: is tagged by udev as: Keyboard
[    20.526] (II) event3  - SEM USB Keyboard Consumer Control: device is a keyboard
[    20.528] (II) config/udev: Adding input device SEM USB Keyboard System Control (/dev/input/event4)
[    20.528] (**) SEM USB Keyboard System Control: Applying InputClass "libinput keyboard catchall"
[    20.528] (II) Using input driver 'libinput' for 'SEM USB Keyboard System Control'
[    20.528] (**) SEM USB Keyboard System Control: always reports core events
[    20.528] (**) Option "Device" "/dev/input/event4"
[    20.528] (**) Option "_source" "server/udev"
[    20.530] (II) event4  - SEM USB Keyboard System Control: is tagged by udev as: Keyboard
[    20.530] (II) event4  - SEM USB Keyboard System Control: device is a keyboard
[    20.530] (II) event4  - SEM USB Keyboard System Control: device removed
[    20.548] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.1/0003:1A2C:0E24.0002/input/input7/event4"
[    20.548] (II) XINPUT: Adding extended input device "SEM USB Keyboard System Control" (type: KEYBOARD, id 10)
[    20.548] (**) Option "xkb_model" "pc105"
[    20.548] (**) Option "xkb_layout" "pl"
[    20.550] (II) event4  - SEM USB Keyboard System Control: is tagged by udev as: Keyboard
[    20.550] (II) event4  - SEM USB Keyboard System Control: device is a keyboard
[    20.551] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event7)
[    20.551] (II) No input driver specified, ignoring this device.
[    20.551] (II) This device may have been added with another device file.
[    20.552] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event8)
[    20.552] (II) No input driver specified, ignoring this device.
[    20.552] (II) This device may have been added with another device file.
[    20.552] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event9)
[    20.552] (II) No input driver specified, ignoring this device.
[    20.552] (II) This device may have been added with another device file.
[    20.553] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event10)
[    20.553] (II) No input driver specified, ignoring this device.
[    20.553] (II) This device may have been added with another device file.
[    20.553] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[    20.553] (II) No input driver specified, ignoring this device.
[    20.553] (II) This device may have been added with another device file.
[    20.554] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event6)
[    20.554] (**) HP WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[    20.554] (II) Using input driver 'libinput' for 'HP WMI hotkeys'
[    20.554] (**) HP WMI hotkeys: always reports core events
[    20.554] (**) Option "Device" "/dev/input/event6"
[    20.555] (**) Option "_source" "server/udev"
[    20.555] (II) event6  - HP WMI hotkeys: is tagged by udev as: Keyboard Switch
[    20.555] (II) event6  - HP WMI hotkeys: device is a keyboard
[    20.555] (II) event6  - HP WMI hotkeys: device removed
[    20.588] (**) Option "config_info" "udev:/sys/devices/virtual/input/input9/event6"
[    20.588] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 11)
[    20.588] (**) Option "xkb_model" "pc105"
[    20.588] (**) Option "xkb_layout" "pl"
[    20.589] (II) event6  - HP WMI hotkeys: is tagged by udev as: Keyboard Switch
[    20.589] (II) event6  - HP WMI hotkeys: device is a keyboard
[    20.596] (**) SEM USB Keyboard Consumer Control: Applying InputClass "libinput keyboard catchall"
[    20.596] (II) Using input driver 'libinput' for 'SEM USB Keyboard Consumer Control'
[    20.596] (**) SEM USB Keyboard Consumer Control: always reports core events
[    20.596] (**) Option "Device" "/dev/input/event3"
[    20.596] (**) Option "_source" "_driver/libinput"
[    20.596] (II) libinput: SEM USB Keyboard Consumer Control: is a virtual subdevice
[    20.596] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.1/0003:1A2C:0E24.0002/input/input6/event3"
[    20.596] (II) XINPUT: Adding extended input device "SEM USB Keyboard Consumer Control" (type: KEYBOARD, id 12)
[    20.596] (**) Option "xkb_model" "pc105"
[    20.596] (**) Option "xkb_layout" "pl"
[    67.879] (II) RADEON(0): EDID vendor "DEL", prod id 41035
[    67.879] (II) RADEON(0): Using EDID range info for horizontal sync
[    67.879] (II) RADEON(0): Using EDID range info for vertical refresh
[    67.879] (II) RADEON(0): Printing DDC gathered Modelines:
[    67.879] (II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[    67.879] (II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    67.879] (II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    67.879] (II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    67.879] (II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    67.879] (II) RADEON(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    67.879] (II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    67.879] (II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    67.879] (II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    67.879] (II) RADEON(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    67.924] (II) RADEON(0): EDID vendor "DEL", prod id 41035
[    67.924] (II) RADEON(0): Using hsync ranges from config file
[    67.924] (II) RADEON(0): Using vrefresh ranges from config file
[    67.924] (II) RADEON(0): Printing DDC gathered Modelines:
[    67.924] (II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[    67.924] (II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    67.924] (II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    67.924] (II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    67.924] (II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    67.924] (II) RADEON(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    67.924] (II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    67.924] (II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    67.924] (II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    67.924] (II) RADEON(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    67.965] (II) RADEON(0): EDID vendor "DEL", prod id 41035
[    67.965] (II) RADEON(0): Using hsync ranges from config file
[    67.965] (II) RADEON(0): Using vrefresh ranges from config file
[    67.965] (II) RADEON(0): Printing DDC gathered Modelines:
[    67.965] (II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[    67.965] (II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    67.965] (II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    67.965] (II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    67.965] (II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    67.965] (II) RADEON(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    67.965] (II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    67.965] (II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    67.965] (II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    67.965] (II) RADEON(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    70.060] (II) RADEON(0): EDID vendor "DEL", prod id 41035
[    70.060] (II) RADEON(0): Using hsync ranges from config file
[    70.060] (II) RADEON(0): Using vrefresh ranges from config file
[    70.060] (II) RADEON(0): Printing DDC gathered Modelines:
[    70.060] (II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[    70.060] (II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    70.060] (II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    70.060] (II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    70.060] (II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    70.060] (II) RADEON(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    70.060] (II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    70.060] (II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    70.060] (II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    70.060] (II) RADEON(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    73.701] (II) RADEON(0): EDID vendor "DEL", prod id 41035
[    73.701] (II) RADEON(0): Using hsync ranges from config file
[    73.701] (II) RADEON(0): Using vrefresh ranges from config file
[    73.701] (II) RADEON(0): Printing DDC gathered Modelines:
[    73.701] (II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[    73.701] (II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    73.701] (II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    73.701] (II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    73.701] (II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    73.701] (II) RADEON(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    73.701] (II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    73.701] (II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    73.701] (II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    73.701] (II) RADEON(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    73.846] (II) RADEON(0): EDID vendor "DEL", prod id 41035
[    73.846] (II) RADEON(0): Using hsync ranges from config file
[    73.846] (II) RADEON(0): Using vrefresh ranges from config file
[    73.846] (II) RADEON(0): Printing DDC gathered Modelines:
[    73.846] (II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[    73.846] (II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    73.846] (II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    73.846] (II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    73.846] (II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    73.846] (II) RADEON(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    73.846] (II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    73.846] (II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    73.846] (II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    73.846] (II) RADEON(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    90.079] (II) config/udev: Adding input device A4Tech USB Mouse Mouse (/dev/input/mouse0)
[    90.079] (II) No input driver specified, ignoring this device.
[    90.079] (II) This device may have been added with another device file.
[    90.177] (II) config/udev: Adding input device A4Tech USB Mouse Mouse (/dev/input/event11)
[    90.178] (**) A4Tech USB Mouse Mouse: Applying InputClass "libinput pointer catchall"
[    90.178] (II) Using input driver 'libinput' for 'A4Tech USB Mouse Mouse'
[    90.178] (**) A4Tech USB Mouse Mouse: always reports core events
[    90.178] (**) Option "Device" "/dev/input/event11"
[    90.178] (**) Option "_source" "server/udev"
[    90.253] (II) event11 - A4Tech USB Mouse Mouse: is tagged by udev as: Mouse
[    90.254] (II) event11 - A4Tech USB Mouse Mouse: device is a pointer
[    90.254] (II) event11 - A4Tech USB Mouse Mouse: device removed
[    90.292] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7:1.0/0003:09DA:C10A.0003/input/input14/event11"
[    90.292] (II) XINPUT: Adding extended input device "A4Tech USB Mouse Mouse" (type: MOUSE, id 13)
[    90.294] (**) Option "AccelerationScheme" "none"
[    90.295] (**) A4Tech USB Mouse Mouse: (accel) selected scheme none/0
[    90.295] (**) A4Tech USB Mouse Mouse: (accel) acceleration factor: 2.000
[    90.295] (**) A4Tech USB Mouse Mouse: (accel) acceleration threshold: 4
[    90.353] (II) event11 - A4Tech USB Mouse Mouse: is tagged by udev as: Mouse
[    90.354] (II) event11 - A4Tech USB Mouse Mouse: device is a pointer
[    90.372] (II) config/udev: Adding input device A4Tech USB Mouse (/dev/input/event12)
[    90.372] (II) No input driver specified, ignoring this device.
[    90.372] (II) This device may have been added with another device file.

Offline

 

#2  2020-09-07 17:14:01

  andreq - Członek DUG

andreq
Członek DUG
Skąd: Nisko
Zarejestrowany: 2005-01-11

Re: Pomoc przy instalacji grafiki ATI Radeon X300 na komputerze biurowym

Zainstaluj pakiet firmware-amd-graphics https://wiki.debian.org/AtiHowTo

Offline

 

#3  2020-09-07 17:50:56

  asm - Użytkownik

asm
Użytkownik
Zarejestrowany: 2020-09-07

Re: Pomoc przy instalacji grafiki ATI Radeon X300 na komputerze biurowym

Wyświetla mi się, że już to mam:
firmware-amd-graphics is already the newest version (20190114-2).


Próbowałem także utworzyć plik:
/etc/X11/xorg.conf.d/20-amdgpu.conf

Section "Device"
   Identifier  "AMD Graphics"
   Driver      "amdgpu"
   Option      "TearFree"  "true"
EndSection

Ale też nie działa. Po restarcie jest czarny ekran. Nie mogę zmieniać ustawień grafiki.

===============================================

ok. trzeba było wpisać 20-radeon.conf a nie amdgpu

mogę wreszcie zmieniać ustawienia! zobaczę czy to coś pomoże

Ostatnio edytowany przez asm (2020-09-07 18:36:46)

Offline

 

#4  2020-09-07 18:44:33

  andreq - Członek DUG

andreq
Członek DUG
Skąd: Nisko
Zarejestrowany: 2005-01-11

Re: Pomoc przy instalacji grafiki ATI Radeon X300 na komputerze biurowym

Spróbuj takiego konfigu:

Kod:

Section "Device"
    Identifier    "X300"
    Driver    "radeon"
    Option    "SwapbuffersWait"    "off"
    Option    "ColorTiling2D"        "off"
    Option    "DynamicPM"        "on"
EndSection

Offline

 

#5  2020-09-07 19:26:23

  asm - Użytkownik

asm
Użytkownik
Zarejestrowany: 2020-09-07

Re: Pomoc przy instalacji grafiki ATI Radeon X300 na komputerze biurowym

Trudno powiedzieć ile to daje.

Natomiast znalazłem w internecie informację, żeby ustawić Option "DRI" "3"

I dopiero wtedy dzieje się ciekawa rzecz. Niestety środowisko graficzne się wysypuje. Ale uruchamia się w trybie awaryjnym!

Nie mam wtedy panelu i kompozycji. Ale za to zostają ikony na pulpicie i da się otwierać okienka.

Co się okazuje - wszystko chodzi jednak wtedy idealnie i bez żadnego szarpania jest tylko lekki tearing. Ale dokładnie TAK SAMO chodziła na tym Winda. Lekki tearing który jednak w niczym nie przeszkadza, bo treść wewnątrz okna podczas jego przemieszczania pozostaje ostra. mam obok drugi podobny komputer z Windą i sobie to porównuję.

Wszystko wskazuje na to, że to środowisko graficzne wymaga mocniejszej karty. Będę jeszcze kombinować.

Offline

 

#6  2020-09-08 05:37:39

  Jacekalex - Podobno człowiek...;)

Jacekalex
Podobno człowiek...;)
Skąd: /dev/random
Zarejestrowany: 2008-01-07

Re: Pomoc przy instalacji grafiki ATI Radeon X300 na komputerze biurowym

Cinnamon i lepsza karta?

Raczej prawidłowa konfiguracja Opengl jest potrzebna.

Zainstaluj lepiej środowisko  Mate, jest lżejsze i prostsze od Cinnamona, u moich ziomali na  starym Radeonie za 60 zł (ATI Radeon x600 128MB, PICex) śmiga bez problemu.
Mam na myśli stabilnego Debiana Buster AMD64 - 64bit na kompie Core2-duo E8400, 8GB RAM DDR2, Radeon.

Ostatnio edytowany przez Jacekalex (2020-09-08 05:39:34)

W demokracji każdy naród ma taką władzę, na jaką zasługuje ;)
Si vis pacem  para bellum  ;)       |       Pozdrawiam :)

Offline

 

#7  2020-09-08 10:19:39

  andreq - Członek DUG

andreq
Członek DUG
Skąd: Nisko
Zarejestrowany: 2005-01-11

Re: Pomoc przy instalacji grafiki ATI Radeon X300 na komputerze biurowym

asm napisał(-a):

Trudno powiedzieć ile to daje.

To mój stary wygrzebany konfig, z czasów kiedy miałem radeona.

Offline

 

#8  2020-09-08 12:43:50

  asm - Użytkownik

asm
Użytkownik
Zarejestrowany: 2020-09-07

Re: Pomoc przy instalacji grafiki ATI Radeon X300 na komputerze biurowym

No i Mate działa idealnie płynnie! Bez najmniejszej nawet przycinki!

Ja tak mogę pracować, tylko że to wymaga zmiany przyzwyczajeń. Jak ja tak zrobię u kogoś to mi będzie krzyczeć, że z powrotem chce Windowsa.
Cinnamon jest pod tym względem bezkonkurencyjny.

Offline

 

#9  2020-09-08 18:18:55

  ilin - Palacz

ilin
Palacz
Skąd: PRLu
Zarejestrowany: 2006-05-03

Re: Pomoc przy instalacji grafiki ATI Radeon X300 na komputerze biurowym

asm napisał(-a):

Ja tak mogę pracować, tylko że to wymaga zmiany przyzwyczajeń. Jak ja tak zrobię u kogoś to mi będzie krzyczeć, że z powrotem chce Windowsa.
Cinnamon jest pod tym względem bezkonkurencyjny.

Doprawdy?
Moje mate

https://i.postimg.cc/D8CTTnB3/Zrzut-ekranu-z-2020-09-08-18-13-46.png

Problemy rozwiązujemy na forum nie na PW -> Niech inni na tym skorzystają.
Polski portal Debiana

Offline

 

#10  2020-09-08 19:05:43

  asm - Użytkownik

asm
Użytkownik
Zarejestrowany: 2020-09-07

Re: Pomoc przy instalacji grafiki ATI Radeon X300 na komputerze biurowym

ok!

No to teraz będę kombinować z dostosowaniem wyglądu. Ale żeby otrzymać funkcjonalność menu takiego jak w Win7 lub Cinnamonie to pewnie trzeba jakiś dodatek zainstalować, bo przeglądam teraz motywy i one zmieniają tylko kolorki i ikony.

Offline

 

 

Strony: 1

Stopka forum

Powered by PunBB
© Copyright 2002–2005 Rickard Andersson
Możesz wyłączyć AdBlock — tu nie ma reklam ;-)