Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!

Ogłoszenie

Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.

Strony: 1

 

#1  2018-01-03 14:50:58

  ciastek1981 - Użytkownik

ciastek1981
Użytkownik
Zarejestrowany: 2016-06-19

[SOLVED] Przy rozruchu systemu "unable to enumerate USB device"

Edyta: System naprawił się w zasadzie sam. Sprawdzałem wszystko co umiałem sprawdzić, a na koniec wpiąłem po raz kolejny pendrive z którego instalowałem system i kolejny raz (robiłem to wcześniej ileś razy) clean, remove, autoclean i autoremove.

----------------------------

Męczy mnie to ostatnio, przy rozruchu systemu

usb 3-2: device not accepting address 5, error -71
usb usb3-port2: unable to enumerate USB device
usb 3-2: device descriptor read/64, error -71
usb 3-2: device descriptor read/64, error -71
usb 5-2: new full-speed USB device number 3 using uhci_hcd

Kod:

Linux R61i 4.14.0-10.1-liquorix-amd64 #1 ZEN SMP PREEMPT liquorix 4.14-13~obs (2018-01-02) x86_64 GNU/Linux

Kod:

[    0.119198] usbcore: registered new interface driver usbfs
[    0.119211] usbcore: registered new interface driver hub
[    0.120003] usbcore: registered new device driver usb
[    1.658179] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.658182] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.658185] usb usb1: Product: EHCI Host Controller
[    1.658187] usb usb1: Manufacturer: Linux 4.14.0-10.1-liquorix-amd64 ehci_hcd
[    1.658189] usb usb1: SerialNumber: 0000:00:1a.7
[    1.672226] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.672229] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.672231] usb usb2: Product: EHCI Host Controller
[    1.672233] usb usb2: Manufacturer: Linux 4.14.0-10.1-liquorix-amd64 ehci_hcd
[    1.672235] usb usb2: SerialNumber: 0000:00:1d.7
[    1.673152] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.673155] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.673158] usb usb3: Product: UHCI Host Controller
[    1.673160] usb usb3: Manufacturer: Linux 4.14.0-10.1-liquorix-amd64 uhci_hcd
[    1.673162] usb usb3: SerialNumber: 0000:00:1a.0
[    1.676032] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.676035] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.676037] usb usb4: Product: UHCI Host Controller
[    1.676078] usb usb4: Manufacturer: Linux 4.14.0-10.1-liquorix-amd64 uhci_hcd
[    1.676080] usb usb4: SerialNumber: 0000:00:1a.1
[    1.682641] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.682645] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.682647] usb usb5: Product: UHCI Host Controller
[    1.682650] usb usb5: Manufacturer: Linux 4.14.0-10.1-liquorix-amd64 uhci_hcd
[    1.682652] usb usb5: SerialNumber: 0000:00:1d.0
[    1.683651] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    1.683672] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.683675] usb usb6: Product: UHCI Host Controller
[    1.683677] usb usb6: Manufacturer: Linux 4.14.0-10.1-liquorix-amd64 uhci_hcd
[    1.683680] usb usb6: SerialNumber: 0000:00:1d.1
[    1.692549] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    1.692551] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.692554] usb usb7: Product: UHCI Host Controller
[    1.692556] usb usb7: Manufacturer: Linux 4.14.0-10.1-liquorix-amd64 uhci_hcd
[    1.692558] usb usb7: SerialNumber: 0000:00:1d.2
[    2.170052] usb 3-2: new full-speed USB device number 2 using uhci_hcd
[    2.186051] usb 5-1: new full-speed USB device number 2 using uhci_hcd
[    2.296051] usb 3-2: device descriptor read/64, error -71
[    2.385148] usb 5-1: New USB device found, idVendor=08bb, idProduct=2706
[    2.385151] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.385154] usb 5-1: Product: USB Audio DAC   
[    2.385156] usb 5-1: Manufacturer: Burr-Brown from TI              
[    2.391345] usbcore: registered new interface driver usbhid
[    2.391347] usbhid: USB HID core driver
[    2.392160] input: Burr-Brown from TI               USB Audio DAC    as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.2/0003:08BB:2706.0001/input/input7
[    2.444127] hid-generic 0003:08BB:2706.0001: input,hidraw0: USB HID v1.00 Device [Burr-Brown from TI               USB Audio DAC   ] on usb-0000:00:1d.0-1/input2
[    2.526052] usb 3-2: device descriptor read/64, error -71
[    2.746097] usb 3-2: new full-speed USB device number 3 using uhci_hcd
[    2.872091] usb 3-2: device descriptor read/64, error -71
[    3.102046] usb 3-2: device descriptor read/64, error -71
[    3.182046] usb 5-2: new full-speed USB device number 3 using uhci_hcd
[    3.208104] usb usb3-port2: attempt power cycle
[    3.352148] usb 5-2: New USB device found, idVendor=046d, idProduct=c084
[    3.352151] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.352153] usb 5-2: Product: G203 Prodigy Gaming Mouse
[    3.352155] usb 5-2: Manufacturer: Logitech
[    3.352157] usb 5-2: SerialNumber: 197F36493137
[    3.361775] input: Logitech G203 Prodigy Gaming Mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.0/0003:046D:C084.0002/input/input9
[    3.361869] hid-generic 0003:046D:C084.0002: input,hidraw1: USB HID v1.11 Mouse [Logitech G203 Prodigy Gaming Mouse] on usb-0000:00:1d.0-2/input0
[    3.366528] input: Logitech G203 Prodigy Gaming Mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.1/0003:046D:C084.0003/input/input10
[    3.418445] hid-generic 0003:046D:C084.0003: input,hiddev96,hidraw2: USB HID v1.11 Keyboard [Logitech G203 Prodigy Gaming Mouse] on usb-0000:00:1d.0-2/input1
[    3.634053] usb 3-2: new full-speed USB device number 4 using uhci_hcd
[    4.048039] usb 3-2: device not accepting address 4, error -71
[    4.162048] usb 3-2: new full-speed USB device number 5 using uhci_hcd
[    4.576053] usb 3-2: device not accepting address 5, error -71
[    4.576105] usb usb3-port2: unable to enumerate USB device
[   14.590421] usbcore: registered new interface driver snd-usb-audio

Więcej http://paste.debian.net/1003404/

Kod:

sty 03 15:26:22 R61i systemd-udevd[268]: Invalid rule /etc/udev/rules.d/ft-rockey.rules:1: unknown key 'BUS'
sty 03 15:26:31 R61i avahi-daemon[489]: chroot.c: open() failed: No such file or directory

Kod:

Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 003: ID 046d:c084 Logitech, Inc. 
Bus 005 Device 002: ID 08bb:2706 Texas Instruments PCM2706 Audio Codec
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

Kod:

/:  Bus 07.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/:  Bus 06.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/:  Bus 05.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
    |__ Port 1: Dev 2, If 0, Class=Audio, Driver=snd-usb-audio, 12M
    |__ Port 1: Dev 2, If 1, Class=Audio, Driver=snd-usb-audio, 12M
    |__ Port 1: Dev 2, If 2, Class=Human Interface Device, Driver=usbhid, 12M
    |__ Port 2: Dev 3, If 0, Class=Human Interface Device, Driver=usbhid, 12M
    |__ Port 2: Dev 3, If 1, Class=Human Interface Device, Driver=usbhid, 12M
/:  Bus 04.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/:  Bus 03.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/6p, 480M
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/4p, 480M

Szukałem opcji IOMMU w BIOS'ie i nie znalazłem, odłączyłem na kilka minut od sieci i baterii, zapuściłem fsck ... no i na tym moja wiedza się kończy.

Komunikat pojawia się niezależnie czy są wpięte urządzenia USB czy nie.

Z tego co patrzyłem

Kod:

#define    EPROTO        71    /* Protocol error */

/usr/include/asm-generic/errno.h

Przejmować się tym? Czy da się to jakoś naprawić?

----------------------------
Edyta: System naprawił się w zasadzie sam. Sprawdzałem wszystko co umiałem sprawdzić, a na koniec wpiąłem po raz kolejny pendrive z którego instalowałem system i kolejny raz (robiłem to wcześniej ileś razy) clean, remove, autoclean i autoremove.

Ostatnio edytowany przez ciastek1981 (2018-01-03 19:50:57)

Debian - there is no substitute!

Offline

 

 

Strony: 1

Stopka forum

Powered by PunBB
© Copyright 2002–2005 Rickard Andersson
Możesz wyłączyć AdBlock — tu nie ma reklam ;-)