Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!

Ogłoszenie

Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundację Dzieciom „Zdążyć z Pomocą”.
Więcej informacji na dug.net.pl/pomagamy/.

#1 2017-09-23 09:50:22

perestoo
Użytkownik
Zarejestrowany: 2015-04-13

mysz działa w oknie programu ale nie na belce i gnome-shell

Witam, po aktualizacji do Debian 9 moja mysz działa w oknie programu ale na belce okna i na górnym pasku gnome-shell nie ma reakcji, co ciekawe hot-corner działa minimalizuje otwarte okna niestety choć mogę ruszać myszą żadna funkcja w tym trybie nie działa, sam gnome-shell chyba działa bo z klawiatury idzie się przełączać, otwierać i zamykać okna itd
wyłączyłem już wszystkie gnome-shell-extension a także brutalnie przez purge odinstalowałem i zainstalowałem z powrotem gnome-shell i gdm3 - bez zmian,
może to wina sterowników nvidia ale boje się sam przy tym grzebać
wynik komendy

Kod:

cat /var/log/Xorg.0.log

Kod:

[    12.491] (--) Log file renamed from "/var/log/Xorg.pid-1070.log" to "/var/log/Xorg.0.log"
[    12.493] 
X.Org X Server 1.19.2
Release Date: 2017-03-02
[    12.493] X Protocol Version 11, Revision 0
[    12.493] Build Operating System: Linux 4.9.0-3-amd64 x86_64 Debian
[    12.493] Current Operating System: Linux debian-prs 4.9.0-3-amd64 #1 SMP Debian 4.9.30-2+deb9u5 (2017-09-19) x86_64
[    12.493] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-3-amd64 root=UUID=8a96fcab-0931-4bf4-95f6-5367ec89afca ro quiet
[    12.493] Build Date: 07 July 2017  06:14:06AM
[    12.493] xorg-server 2:1.19.2-1+deb9u1 (https://www.debian.org/support) 
[    12.493] Current version of pixman: 0.34.0
[    12.493]     Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[    12.493] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    12.493] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Sep 23 08:43:08 2017
[    12.496] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    12.496] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    12.499] (==) No Layout section.  Using the first Screen section.
[    12.499] (==) No screen section available. Using defaults.
[    12.499] (**) |-->Screen "Default Screen Section" (0)
[    12.499] (**) |   |-->Monitor "<default monitor>"
[    12.500] (==) No device specified for screen "Default Screen Section".
    Using the first device section listed.
[    12.500] (**) |   |-->Device "My GPU"
[    12.500] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
[    12.500] (==) Automatically adding devices
[    12.500] (==) Automatically enabling devices
[    12.500] (==) Automatically adding GPU devices
[    12.500] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    12.503] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    12.503]     Entry deleted from font path.
[    12.508] (==) FontPath set to:
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/100dpi/:unscaled,
    /usr/share/fonts/X11/75dpi/:unscaled,
    /usr/share/fonts/X11/Type1,
    /usr/share/fonts/X11/100dpi,
    /usr/share/fonts/X11/75dpi,
    built-ins
[    12.508] (==) ModulePath set to "/usr/lib/xorg/modules"
[    12.508] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
[    12.508] (II) Loader magic: 0x55b858cdee00
[    12.508] (II) Module ABI versions:
[    12.508]     X.Org ANSI C Emulation: 0.4
[    12.508]     X.Org Video Driver: 23.0
[    12.508]     X.Org XInput driver : 24.1
[    12.508]     X.Org Server Extension : 10.0
[    12.509] (++) using VT number 1

[    12.512] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c2
[    12.512] (II) xfree86: Adding drm device (/dev/dri/card0)
[    12.513] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 12 paused 0
[    12.515] (--) PCI:*(0:1:0:0) 10de:11c6:1462:8a96 rev 161, Mem @ 0xfd000000/16777216, 0xd0000000/134217728, 0xdc000000/33554432, I/O @ 0x00009c00/128, BIOS @ 0x????????/131072
[    12.516] (II) LoadModule: "glx"
[    12.520] (II) Loading /usr/lib/xorg/modules/linux/libglx.so
[    12.596] (II) Module glx: vendor="NVIDIA Corporation"
[    12.596]     compiled for 4.0.2, module version = 1.0.0
[    12.596]     Module class: X.Org Server Extension
[    12.596] (II) NVIDIA GLX Module  304.135  Tue Jan 17 15:46:50 PST 2017
[    12.596] (II) LoadModule: "nvidia"
[    12.597] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[    12.611] (II) Module nvidia: vendor="NVIDIA Corporation"
[    12.611]     compiled for 4.0.2, module version = 1.0.0
[    12.611]     Module class: X.Org Video Driver
[    12.615] (II) NVIDIA dlloader X Driver  304.135  Tue Jan 17 15:28:00 PST 2017
[    12.615] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    12.616] (II) Loading sub module "fb"
[    12.616] (II) LoadModule: "fb"
[    12.619] (II) Loading /usr/lib/xorg/modules/libfb.so
[    12.621] (II) Module fb: vendor="X.Org Foundation"
[    12.621]     compiled for 1.19.2, module version = 1.0.0
[    12.621]     ABI class: X.Org ANSI C Emulation, version 0.4
[    12.621] (II) Loading sub module "wfb"
[    12.621] (II) LoadModule: "wfb"
[    12.621] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    12.623] (II) Module wfb: vendor="X.Org Foundation"
[    12.623]     compiled for 1.19.2, module version = 1.0.0
[    12.623]     ABI class: X.Org ANSI C Emulation, version 0.4
[    12.623] (II) Loading sub module "ramdac"
[    12.623] (II) LoadModule: "ramdac"
[    12.623] (II) Module "ramdac" already built-in
[    12.626] (II) NVIDIA(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
[    12.626] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[    12.626] (==) NVIDIA(0): RGB weight 888
[    12.626] (==) NVIDIA(0): Default visual is TrueColor
[    12.626] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[    12.626] (**) NVIDIA(0): Enabling 2D acceleration
[    13.301] (II) NVIDIA(GPU-0): Display (SAMSUNG LCD (CRT-0)) does not support NVIDIA 3D
[    13.301] (II) NVIDIA(GPU-0):     Vision stereo.
[    13.303] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 650 Ti (GK106) at PCI:1:0:0 (GPU-0)
[    13.303] (--) NVIDIA(0): Memory: 2097152 kBytes
[    13.303] (--) NVIDIA(0): VideoBIOS: 80.06.3c.00.11
[    13.303] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[    13.303] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[    13.307] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 650 Ti at PCI:1:0:0
[    13.307] (--) NVIDIA(0):     SAMSUNG LCD (CRT-0) (connected)
[    13.307] (--) NVIDIA(0):     DFP-0
[    13.307] (--) NVIDIA(0):     DFP-1
[    13.307] (--) NVIDIA(0):     DFP-2
[    13.307] (--) NVIDIA(0): SAMSUNG LCD (CRT-0): 480.0 MHz maximum pixel clock
[    13.307] (--) NVIDIA(0): DFP-0: 330.0 MHz maximum pixel clock
[    13.307] (--) NVIDIA(0): DFP-0: Internal Single Link TMDS
[    13.307] (--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock
[    13.307] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
[    13.307] (--) NVIDIA(0): DFP-2: 330.0 MHz maximum pixel clock
[    13.307] (--) NVIDIA(0): DFP-2: Internal Single Link TMDS
[    13.307] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    13.307] (**) NVIDIA(0):     device SAMSUNG LCD (CRT-0) (Using EDID frequencies has
[    13.307] (**) NVIDIA(0):     been enabled on all display devices.)
[    13.309] (==) NVIDIA(0): 
[    13.309] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[    13.309] (==) NVIDIA(0):     will be used as the requested mode.
[    13.309] (==) NVIDIA(0): 
[    13.309] (II) NVIDIA(0): Validated MetaModes:
[    13.309] (II) NVIDIA(0):     "CRT-0:nvidia-auto-select"
[    13.309] (II) NVIDIA(0): Virtual screen size determined to be 1440 x 900
[    13.331] (--) NVIDIA(0): DPI set to (89, 87); computed from "UseEdidDpi" X config
[    13.331] (--) NVIDIA(0):     option
[    13.331] (--) Depth 24 pixmap format is 32 bpp
[    13.331] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[    13.331] (II) NVIDIA:     access.
[    13.336] (II) NVIDIA(0): Setting mode "CRT-0:nvidia-auto-select"
[    13.403] (==) NVIDIA(0): Disabling shared memory pixmaps
[    13.403] (==) NVIDIA(0): Backing store enabled
[    13.403] (==) NVIDIA(0): Silken mouse enabled
[    13.405] (==) NVIDIA(0): DPMS enabled
[    13.406] (II) Loading sub module "dri2"
[    13.406] (II) LoadModule: "dri2"
[    13.406] (II) Module "dri2" already built-in
[    13.406] (II) NVIDIA(0): [DRI2] Setup complete
[    13.406] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[    13.407] (--) RandR disabled
[    13.411] (II) SELinux: Disabled on system
[    13.412] (II) Initializing extension GLX
[    13.413] (II) Indirect GLX disabled.(II) config/udev: Adding input device Power Button (/dev/input/event3)
[    13.514] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    13.514] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    13.514] (II) LoadModule: "libinput"
[    13.515] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    13.518] (II) Module libinput: vendor="X.Org Foundation"
[    13.518]     compiled for 1.19.0, module version = 0.23.0
[    13.518]     Module class: X.Org XInput Driver
[    13.518]     ABI class: X.Org XInput driver, version 24.1
[    13.518] (II) Using input driver 'libinput' for 'Power Button'
[    13.519] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 38 paused 0
[    13.519] (**) Power Button: always reports core events
[    13.519] (**) Option "Device" "/dev/input/event3"
[    13.520] (**) Option "_source" "server/udev"
[    13.520] (II) input device 'Power Button', /dev/input/event3 is tagged by udev as: Keyboard
[    13.520] (II) input device 'Power Button', /dev/input/event3 is a keyboard
[    13.521] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[    13.521] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    13.521] (**) Option "xkb_model" "pc105"
[    13.521] (**) Option "xkb_layout" "pl"
[    13.553] (II) input device 'Power Button', /dev/input/event3 is tagged by udev as: Keyboard
[    13.553] (II) input device 'Power Button', /dev/input/event3 is a keyboard
[    13.554] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    13.554] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    13.554] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    13.554] (II) Using input driver 'libinput' for 'Power Button'
[    13.555] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 41 paused 0
[    13.555] (**) Power Button: always reports core events
[    13.555] (**) Option "Device" "/dev/input/event2"
[    13.555] (**) Option "_source" "server/udev"
[    13.556] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
[    13.556] (II) input device 'Power Button', /dev/input/event2 is a keyboard
[    13.556] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event2"
[    13.556] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    13.556] (**) Option "xkb_model" "pc105"
[    13.556] (**) Option "xkb_layout" "pl"
[    13.557] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
[    13.557] (II) input device 'Power Button', /dev/input/event2 is a keyboard
[    13.558] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event12)
[    13.558] (II) No input driver specified, ignoring this device.
[    13.558] (II) This device may have been added with another device file.
[    13.558] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event13)
[    13.558] (II) No input driver specified, ignoring this device.
[    13.558] (II) This device may have been added with another device file.
[    13.559] (II) config/udev: Adding input device HDA Intel Line Out CLFE (/dev/input/event10)
[    13.559] (II) No input driver specified, ignoring this device.
[    13.559] (II) This device may have been added with another device file.
[    13.560] (II) config/udev: Adding input device HDA Intel Line Out Side (/dev/input/event11)
[    13.560] (II) No input driver specified, ignoring this device.
[    13.560] (II) This device may have been added with another device file.
[    13.560] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event5)
[    13.561] (II) No input driver specified, ignoring this device.
[    13.561] (II) This device may have been added with another device file.
[    13.561] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event6)
[    13.561] (II) No input driver specified, ignoring this device.
[    13.561] (II) This device may have been added with another device file.
[    13.562] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event7)
[    13.562] (II) No input driver specified, ignoring this device.
[    13.562] (II) This device may have been added with another device file.
[    13.562] (II) config/udev: Adding input device HDA Intel Line Out Front (/dev/input/event8)
[    13.563] (II) No input driver specified, ignoring this device.
[    13.563] (II) This device may have been added with another device file.
[    13.563] (II) config/udev: Adding input device HDA Intel Line Out Surround (/dev/input/event9)
[    13.563] (II) No input driver specified, ignoring this device.
[    13.563] (II) This device may have been added with another device file.
[    13.564] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event1)
[    13.564] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[    13.564] (**) Logitech USB Optical Mouse: Applying InputClass "libinput pointer catchall"
[    13.564] (II) Using input driver 'libinput' for 'Logitech USB Optical Mouse'
[    13.624] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 42 paused 0
[    13.624] (**) Logitech USB Optical Mouse: always reports core events
[    13.624] (**) Option "Device" "/dev/input/event1"
[    13.624] (**) Option "_source" "server/udev"
[    13.625] (II) input device 'Logitech USB Optical Mouse', /dev/input/event1 is tagged by udev as: Mouse
[    13.625] (II) input device 'Logitech USB Optical Mouse', /dev/input/event1 is a pointer caps
[    13.625] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb4/4-2/4-2:1.0/0003:046D:C058.0001/input/input1/event1"
[    13.625] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 8)
[    13.625] (**) Option "AccelerationScheme" "none"
[    13.625] (**) Logitech USB Optical Mouse: (accel) selected scheme none/0
[    13.625] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[    13.625] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[    13.626] (II) input device 'Logitech USB Optical Mouse', /dev/input/event1 is tagged by udev as: Mouse
[    13.626] (II) input device 'Logitech USB Optical Mouse', /dev/input/event1 is a pointer caps
[    13.627] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
[    13.627] (II) No input driver specified, ignoring this device.
[    13.627] (II) This device may have been added with another device file.
[    13.628] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    13.628] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    13.628] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[    13.628] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[    13.629] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 43 paused 0
[    13.629] (**) AT Translated Set 2 keyboard: always reports core events
[    13.629] (**) Option "Device" "/dev/input/event0"
[    13.629] (**) Option "_source" "server/udev"
[    13.630] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[    13.630] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[    13.630] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    13.630] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[    13.630] (**) Option "xkb_model" "pc105"
[    13.630] (**) Option "xkb_layout" "pl"
[    13.631] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[    13.631] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[    13.631] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[    13.632] (II) No input driver specified, ignoring this device.
[    13.632] (II) This device may have been added with another device file.
[    14.097] (II) NVIDIA(GPU-0): Display (SAMSUNG LCD (CRT-0)) does not support NVIDIA 3D
[    14.097] (II) NVIDIA(GPU-0):     Vision stereo.
[    14.097] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    14.097] (**) NVIDIA(0):     device SAMSUNG LCD (CRT-0) (Using EDID frequencies has
[    14.097] (**) NVIDIA(0):     been enabled on all display devices.)
[    18.637] (II) NVIDIA(GPU-0): Display (SAMSUNG LCD (CRT-0)) does not support NVIDIA 3D
[    18.637] (II) NVIDIA(GPU-0):     Vision stereo.
[    18.637] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    18.637] (**) NVIDIA(0):     device SAMSUNG LCD (CRT-0) (Using EDID frequencies has
[    18.637] (**) NVIDIA(0):     been enabled on all display devices.)
[    25.050] (**) Option "fd" "38"
[    25.050] (**) Option "fd" "41"
[    25.050] (**) Option "fd" "42"
[    25.050] (**) Option "fd" "43"
[    25.315] (II) systemd-logind: got pause for 13:67
[    25.316] (II) systemd-logind: got pause for 226:0
[    25.316] (II) systemd-logind: got pause for 13:65
[    25.317] (II) systemd-logind: got pause for 13:66
[    25.317] (II) systemd-logind: got pause for 13:64

Ostatnio edytowany przez perestoo (2017-09-23 09:50:37)

Offline

 

#2 2017-09-23 11:15:20

qba1707
Użytkownik
Zarejestrowany: 2011-08-16

Re: mysz działa w oknie programu ale nie na belce i gnome-shell

Podejrzewam, ze tu jest pies pogrzebany -  27] (II) No input driver specified, ignoring this device. Jaka dokladnie to jest mysz?

Offline

 

#3 2017-09-23 11:46:18

perestoo
Użytkownik
Zarejestrowany: 2015-04-13

Re: mysz działa w oknie programu ale nie na belce i gnome-shell

Mysz to Logitech B105 zwykła optyczna na USB, podłączyłem też Microsoft Wireless Mouse 1000 zrebootowałem system i działała tak samo.

Offline

 

#4 2017-09-23 11:59:40

qba1707
Użytkownik
Zarejestrowany: 2011-08-16

Re: mysz działa w oknie programu ale nie na belce i gnome-shell

zainstaluj bumblebee

Offline

 

#5 2017-09-23 12:18:12

perestoo
Użytkownik
Zarejestrowany: 2015-04-13

Re: mysz działa w oknie programu ale nie na belce i gnome-shell

wyskoczyło

Kod:

 W: Possible missing firmware /lib/firmware/rtl_nic/rtl8107e-2.fw for module r8169

Offline

 

#6 2017-09-23 12:26:18

qba1707
Użytkownik
Zarejestrowany: 2011-08-16

Re: mysz działa w oknie programu ale nie na belce i gnome-shell

to teraz firmware-realtek

Ostatnio edytowany przez qba1707 (2017-09-23 12:26:51)

Offline

 

#7 2017-09-23 12:55:38

urbinek
Użytkownik
Skąd: Sosnowiec
Zarejestrowany: 2009-10-01
Serwis

Re: mysz działa w oknie programu ale nie na belce i gnome-shell

ihmo myszka działa i to nie jest problem

Kod:

13.564] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[    13.564] (**) Logitech USB Optical Mouse: Applying InputClass "libinput pointer catchall"
[    13.564] (II) Using input driver 'libinput' for 'Logitech USB Optical Mouse'
[    13.624] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 42 paused 0
[    13.624] (**) Logitech USB Optical Mouse: always reports core events
[    13.624] (**) Option "Device" "/dev/input/event1"
[    13.624] (**) Option "_source" "server/udev"
[    13.625] (II) input device 'Logitech USB Optical Mouse', /dev/input/event1 is tagged by udev as: Mouse
[    13.625] (II) input device 'Logitech USB Optical Mouse', /dev/input/event1 is a pointer caps
[    13.625] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb4/4-2/4-2:1.0/0003:046D:C058.0001/input/input1/event1"
[    13.625] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 8)
[    13.625] (**) Option "AccelerationScheme" "none"
[    13.625] (**) Logitech USB Optical Mouse: (accel) selected scheme none/0
[    13.625] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[    13.625] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[    13.626] (II) input device 'Logitech USB Optical Mouse', /dev/input/event1 is tagged by udev as: Mouse
[    13.626] (II) input device 'Logitech USB Optical Mouse', /dev/input/event1 is a pointer caps
[    13.627] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)

Trochę głupie - ale zainstaluj najnowsze sterowniki do grafiki


A w wolnym czasie, robię noże :)
http://nginx.urbinek.eu/_photos/signature.png

Offline

 

#8 2017-09-23 13:30:24

perestoo
Użytkownik
Zarejestrowany: 2015-04-13

Re: mysz działa w oknie programu ale nie na belce i gnome-shell

dzięki, spróbuję najnowsze stery bo po zainstalowaniu bumblebee nawet ekran logowania nie chciał się włączyć

Offline

 

#9 2017-09-23 13:40:41

perestoo
Użytkownik
Zarejestrowany: 2015-04-13

Re: mysz działa w oknie programu ale nie na belce i gnome-shell

OK jedno wiem po odinstalowaniu zamkniętych sterowników nvidia wszystko działa prawidłowo,
pobawię się jeszcze z najnowszymi a wszystkim dziękuję za pomoc

Offline

 

#10 2017-09-23 17:45:18

wikingagressor
Użytkownik
Skąd: Józefów k.Błonia, mazowieckie
Zarejestrowany: 2015-02-03

Re: mysz działa w oknie programu ale nie na belce i gnome-shell

Przede wszystkim zainstaluj paczke nvidia-detect i ja uruchom. Ona ci powie jakie sterowniki masz zainstalowac jak bedziesz chcial miec binarne od nvidii. Mozesz tez pozostac na otwarto-zrodlowych.


Peace, Love and Debian for the World!!!

Offline

 

Stopka forum

Powered by PunBB
© Copyright 2002–2005 Rickard Andersson
Nas ludzie lubią po prostu, a nie klikając w przyciski ;-)