Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!
Ogłoszenie
Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.
#1 2017-07-30 00:07:45
dominika - Użytkownik
- dominika
- Użytkownik
- Zarejestrowany: 2017-07-29
Czytnik kart pamięci nie widzi karty microSD.
Cześć,
zależy mi na przeniesieniu danych z karty microSD na laptopa (Dell Latitude E7470), niestety czytnik kart pamięci nie widzi podłączonej karty. Niezależnie od tego czy karta została włożona po czy przed uruchomieniem systemu.
lsusb:
Kod:
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 005: ID 8087:0a2b Intel Corp. Bus 001 Device 004: ID 0a5c:5834 Broadcom Corp. Bus 001 Device 003: ID 0bda:5686 Realtek Semiconductor Corp. Bus 001 Device 002: ID 046d:c52f Logitech, Inc. Unifying Receiver Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
system:
Kod:
dominika@dominika:~$ lsb_release --all No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 16.04.2 LTS Release: 16.04 Codename: xenial dominika@dominika:~$ uname --all Linux dominika 4.10.0-27-generic #30~16.04.2-Ubuntu SMP Thu Jun 29 16:07:46 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux
/dev:
Kod:
dominika@dominika:~$ ls -la /dev/sd* brw-rw---- 1 root disk 8, 0 lip 29 23:27 /dev/sda brw-rw---- 1 root disk 8, 1 lip 29 23:27 /dev/sda1 brw-rw---- 1 root disk 8, 2 lip 29 23:27 /dev/sda2 brw-rw---- 1 root disk 8, 3 lip 29 23:27 /dev/sda3 brw-rw---- 1 root disk 8, 4 lip 29 23:27 /dev/sda4 brw-rw---- 1 root disk 8, 5 lip 29 23:27 /dev/sda5 brw-rw---- 1 root disk 8, 6 lip 29 23:27 /dev/sda6 brw-rw---- 1 root disk 8, 7 lip 29 23:27 /dev/sda7
fdisk z włożoną kartą:
Kod:
dominika@dominika:~$ sudo fdisk -l [sudo] hasło użytkownika dominika: Disk /dev/sda: 238,5 GiB, 256060514304 bytes, 500118192 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disklabel type: gpt Disk identifier: E98AE4D9-5D27-4506-A7D5-FB675994BA44 Urządzenie Start Koniec Sektory Size Typ /dev/sda1 2048 1023999 1021952 499M EFI System /dev/sda2 1024000 1286143 262144 128M Microsoft reserved /dev/sda3 1286144 364958860 363672717 173,4G Microsoft basic data /dev/sda4 482314240 483235839 921600 450M Windows recovery environment /dev/sda5 483235840 500117503 16881664 8,1G Windows recovery environment /dev/sda6 364959744 465766399 100806656 48,1G Linux filesystem /dev/sda7 465766400 482314239 16547840 7,9G Linux swap Partition table entries are not in disk order.
fdisk przy wyjętej karcie:
Kod:
dominika@dominika:~$ sudo fdisk -l Disk /dev/sda: 238,5 GiB, 256060514304 bytes, 500118192 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disklabel type: gpt Disk identifier: E98AE4D9-5D27-4506-A7D5-FB675994BA44 Urządzenie Start Koniec Sektory Size Typ /dev/sda1 2048 1023999 1021952 499M EFI System /dev/sda2 1024000 1286143 262144 128M Microsoft reserved /dev/sda3 1286144 364958860 363672717 173,4G Microsoft basic data /dev/sda4 482314240 483235839 921600 450M Windows recovery environment /dev/sda5 483235840 500117503 16881664 8,1G Windows recovery environment /dev/sda6 364959744 465766399 100806656 48,1G Linux filesystem /dev/sda7 465766400 482314239 16547840 7,9G Linux swap Partition table entries are not in disk order.
Zaznaczę, że zaczynam przygodę z system Linux i generalnie po przejrzeniu kilku wpisów, dodałam rzeczy które z punktu widzenia poprzednich okazały się istotne. Może i w tym wypadku pomogą, natomiast prosiłabym o wyrozumiałość i uwagi na co powinnam zwrócić uwagę przy takich problemach czy jak odczytywać poszczególne wiadomości. Jeżeli jakiś output powinnam dołączyć, proszę o wskazówkę nie tylko odnośnie brakujacego wyniku danej komendy, ale również dlaczego akurat tej komendy potrzebujemy żeby poznać przyczynę problemu.
Dodam, że próbowałam na trzech kartach (2GB, 4GB, 64GB) - żadnej nie wykrył. Zamieszczone wyniki są rezultatem podczas prób odczytu 2GB microSD. Z góry dziękuję za każdą wskazówkę.
Zaraz dodam wynik dmesg.
Offline
#2 2017-07-30 00:10:21
dominika - Użytkownik
- dominika
- Użytkownik
- Zarejestrowany: 2017-07-29
Re: Czytnik kart pamięci nie widzi karty microSD.
dmesg (po włożeniu czytnika) cz.1:
Kod:
[ 0.000000] Linux version 4.10.0-27-generic (buildd@lgw01-60) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4) ) #30~16.04.2-Ubuntu SMP Thu Jun 29 16:07:46 UTC 2017 (Ubuntu 4.10.0-27.30~16.04.2-generic 4.10.17) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.10.0-27-generic.efi.signed root=UUID=59a4aa70-da9c-4d13-8403-987b618e6372 ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64 [ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64 [ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000001000-0x0000000000057fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009cfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009b675fff] usable [ 0.000000] BIOS-e820: [mem 0x000000009b676000-0x000000009b6a3fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000009b6a4000-0x000000009d087fff] usable [ 0.000000] BIOS-e820: [mem 0x000000009d088000-0x000000009d088fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000009d089000-0x000000009d0b2fff] reserved [ 0.000000] BIOS-e820: [mem 0x000000009d0b3000-0x000000009d108fff] usable [ 0.000000] BIOS-e820: [mem 0x000000009d109000-0x000000009d8f9fff] reserved [ 0.000000] BIOS-e820: [mem 0x000000009d8fa000-0x00000000ab387fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000ab388000-0x00000000ab6ebfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ab6ec000-0x00000000ab70cfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000ab70d000-0x00000000abbc4fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000abbc5000-0x00000000abef3fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000abef4000-0x00000000ac4fefff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ac4ff000-0x00000000ac4fffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000ac500000-0x00000000ac5fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000024dffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] e820: update [mem 0x9b32b018-0x9b33b057] usable ==> usable [ 0.000000] e820: update [mem 0x9b30d018-0x9b32aa57] usable ==> usable [ 0.000000] e820: update [mem 0x9b2fc018-0x9b30c257] usable ==> usable [ 0.000000] extended physical RAM map: [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000000fff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000001000-0x0000000000057fff] usable [ 0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009cfff] usable [ 0.000000] reserve setup_data: [mem 0x000000000009d000-0x000000000009ffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000009b2fc017] usable [ 0.000000] reserve setup_data: [mem 0x000000009b2fc018-0x000000009b30c257] usable [ 0.000000] reserve setup_data: [mem 0x000000009b30c258-0x000000009b30d017] usable [ 0.000000] reserve setup_data: [mem 0x000000009b30d018-0x000000009b32aa57] usable [ 0.000000] reserve setup_data: [mem 0x000000009b32aa58-0x000000009b32b017] usable [ 0.000000] reserve setup_data: [mem 0x000000009b32b018-0x000000009b33b057] usable [ 0.000000] reserve setup_data: [mem 0x000000009b33b058-0x000000009b675fff] usable [ 0.000000] reserve setup_data: [mem 0x000000009b676000-0x000000009b6a3fff] ACPI data [ 0.000000] reserve setup_data: [mem 0x000000009b6a4000-0x000000009d087fff] usable [ 0.000000] reserve setup_data: [mem 0x000000009d088000-0x000000009d088fff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x000000009d089000-0x000000009d0b2fff] reserved [ 0.000000] reserve setup_data: [mem 0x000000009d0b3000-0x000000009d108fff] usable [ 0.000000] reserve setup_data: [mem 0x000000009d109000-0x000000009d8f9fff] reserved [ 0.000000] reserve setup_data: [mem 0x000000009d8fa000-0x00000000ab387fff] usable [ 0.000000] reserve setup_data: [mem 0x00000000ab388000-0x00000000ab6ebfff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000ab6ec000-0x00000000ab70cfff] ACPI data [ 0.000000] reserve setup_data: [mem 0x00000000ab70d000-0x00000000abbc4fff] usable [ 0.000000] reserve setup_data: [mem 0x00000000abbc5000-0x00000000abef3fff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x00000000abef4000-0x00000000ac4fefff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000ac4ff000-0x00000000ac4fffff] usable [ 0.000000] reserve setup_data: [mem 0x00000000ac500000-0x00000000ac5fffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000024dffffff] usable [ 0.000000] efi: EFI v2.40 by American Megatrends [ 0.000000] efi: ACPI=0x9b676000 ACPI 2.0=0x9b676000 SMBIOS=0xac2d1000 ESRT=0xac25c598 SMBIOS 3.0=0xac2d0000 [ 0.000000] SMBIOS 3.0.0 present. [ 0.000000] DMI: Dell Inc. Latitude E7470/ , BIOS 1.12.3 12/11/2016 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x24e000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 00C0000000 mask 7FC0000000 uncachable [ 0.000000] 1 base 00B0000000 mask 7FF0000000 uncachable [ 0.000000] 2 base 00AE000000 mask 7FFE000000 uncachable [ 0.000000] 3 base 00AD800000 mask 7FFF800000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] e820: last_pfn = 0xac500 max_arch_pfn = 0x400000000 [ 0.000000] esrt: Reserving ESRT space from 0x00000000ac25c598 to 0x00000000ac25c5d0. [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff945780097000] 97000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0xa1e28000, 0xa1e28fff] PGTABLE [ 0.000000] BRK [0xa1e29000, 0xa1e29fff] PGTABLE [ 0.000000] BRK [0xa1e2a000, 0xa1e2afff] PGTABLE [ 0.000000] BRK [0xa1e2b000, 0xa1e2bfff] PGTABLE [ 0.000000] BRK [0xa1e2c000, 0xa1e2cfff] PGTABLE [ 0.000000] BRK [0xa1e2d000, 0xa1e2dfff] PGTABLE [ 0.000000] BRK [0xa1e2e000, 0xa1e2efff] PGTABLE [ 0.000000] BRK [0xa1e2f000, 0xa1e2ffff] PGTABLE [ 0.000000] BRK [0xa1e30000, 0xa1e30fff] PGTABLE [ 0.000000] BRK [0xa1e31000, 0xa1e31fff] PGTABLE [ 0.000000] BRK [0xa1e32000, 0xa1e32fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x3d819000-0x3fffafff] [ 0.000000] Secure boot enabled [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x000000009B676000 000024 (v02 DELL ) [ 0.000000] ACPI: XSDT 0x000000009B6760B8 0000EC (v01 DELL CBX3 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x000000009B695BB0 00010C (v05 DELL CBX3 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT 0x000000009B676230 01F97B (v02 DELL CBX3 01072009 INTL 20120913) [ 0.000000] ACPI: FACS 0x00000000ABEF1F80 000040 [ 0.000000] ACPI: UEFI 0x000000009B696000 00063A (v01 INTEL RstSataE 00000000 ?? 00000000) [ 0.000000] ACPI: APIC 0x000000009B696640 000084 (v03 DELL CBX3 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 0x000000009B6966C8 000044 (v01 DELL CBX3 01072009 AMI 00010013) [ 0.000000] ACPI: FIDT 0x000000009B696710 00009C (v01 DELL CBX3 01072009 AMI 00010013) [ 0.000000] ACPI: MCFG 0x000000009B6967B0 00003C (v01 DELL CBX3 01072009 MSFT 00000097) [ 0.000000] ACPI: HPET 0x000000009B6967F0 000038 (v01 DELL CBX3 01072009 AMI. 0005000B) [ 0.000000] ACPI: SSDT 0x000000009B696828 00046D (v01 SataRe SataTabl 00001000 INTL 20120913) [ 0.000000] ACPI: LPIT 0x000000009B696C98 000094 (v01 INTEL SKL-ULT 00000000 MSFT 0000005F) [ 0.000000] ACPI: SSDT 0x000000009B696D30 000248 (v02 INTEL sensrhub 00000000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x000000009B696F78 002BAE (v02 INTEL PtidDevc 00001000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x000000009B699B28 000814 (v02 INTEL xh_rvp07 00000000 INTL 20120913) [ 0.000000] ACPI: DBGP 0x000000009B69A340 000034 (v01 INTEL 00000000 MSFT 0000005F) [ 0.000000] ACPI: DBG2 0x000000009B69A378 000054 (v00 INTEL 00000000 MSFT 0000005F) [ 0.000000] ACPI: SSDT 0x000000009B69A3D0 0035DA (v02 SaSsdt SaSsdt 00003000 INTL 20120913) [ 0.000000] ACPI: UEFI 0x000000009B69D9B0 000042 (v01 00000000 00000000) [ 0.000000] ACPI: SSDT 0x000000009B69D9F8 000E73 (v02 CpuRef CpuSsdt 00003000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x000000009B69E870 003BFD (v02 DptfTa DptfTabl 00001000 INTL 20120913) [ 0.000000] ACPI: MSDM 0x000000009B6A2470 000055 (v03 DELL CBX3 06222004 AMI 00010013) [ 0.000000] ACPI: SLIC 0x000000009B6A24C8 000176 (v03 DELL CBX3 01072009 MSFT 00010013) [ 0.000000] ACPI: TCPA 0x000000009B6A2640 000032 (v02 ALASKA NAPAASF 00000001 MSFT 01000013) [ 0.000000] ACPI: BGRT 0x000000009B6A2678 000038 (v00 ?\xffffffdaq\xffffffad 01072009 AMI 00010013) [ 0.000000] ACPI: DMAR 0x000000009B6A26B0 0000A8 (v01 INTEL SKL 00000001 INTL 00000001) [ 0.000000] ACPI: UEFI 0x000000009B6A2758 00005C (v01 INTEL RstSataV 00000000 ?? 00000000) [ 0.000000] ACPI: ASF! 0x000000009B6A27B8 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000024dffffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x24dfd3000-0x24dffdfff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000024dffffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff] [ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009cfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000009b675fff] [ 0.000000] node 0: [mem 0x000000009b6a4000-0x000000009d087fff] [ 0.000000] node 0: [mem 0x000000009d0b3000-0x000000009d108fff] [ 0.000000] node 0: [mem 0x000000009d8fa000-0x00000000ab387fff] [ 0.000000] node 0: [mem 0x00000000ab70d000-0x00000000abbc4fff] [ 0.000000] node 0: [mem 0x00000000ac4ff000-0x00000000ac4fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000024dffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000024dffffff] [ 0.000000] On node 0 totalpages: 2068370 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3995 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 10880 pages used for memmap [ 0.000000] DMA32 zone: 696311 pages, LIFO batch:31 [ 0.000000] Normal zone: 21376 pages used for memmap [ 0.000000] Normal zone: 1368064 pages, LIFO batch:31 [ 0.000000] tboot: non-0 tboot_addr but it is not of type E820_RESERVED [ 0.000000] Reserving Intel graphics memory at 0x00000000ae000000-0x00000000afffffff [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x9b2fc000-0x9b2fcfff] [ 0.000000] PM: Registered nosave memory: [mem 0x9b30c000-0x9b30cfff] [ 0.000000] PM: Registered nosave memory: [mem 0x9b30d000-0x9b30dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x9b32a000-0x9b32afff] [ 0.000000] PM: Registered nosave memory: [mem 0x9b32b000-0x9b32bfff] [ 0.000000] PM: Registered nosave memory: [mem 0x9b33b000-0x9b33bfff] [ 0.000000] PM: Registered nosave memory: [mem 0x9b676000-0x9b6a3fff] [ 0.000000] PM: Registered nosave memory: [mem 0x9d088000-0x9d088fff] [ 0.000000] PM: Registered nosave memory: [mem 0x9d089000-0x9d0b2fff] [ 0.000000] PM: Registered nosave memory: [mem 0x9d109000-0x9d8f9fff] [ 0.000000] PM: Registered nosave memory: [mem 0xab388000-0xab6ebfff] [ 0.000000] PM: Registered nosave memory: [mem 0xab6ec000-0xab70cfff] [ 0.000000] PM: Registered nosave memory: [mem 0xabbc5000-0xabef3fff] [ 0.000000] PM: Registered nosave memory: [mem 0xabef4000-0xac4fefff] [ 0.000000] PM: Registered nosave memory: [mem 0xac500000-0xac5fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xac600000-0xadffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xae000000-0xafffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xb0000000-0xefffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfdffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.000000] e820: [mem 0xb0000000-0xefffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] percpu: Embedded 36 pages/cpu @ffff9459cdc00000 s107992 r8192 d31272 u524288 [ 0.000000] pcpu-alloc: s107992 r8192 d31272 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2036029 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.10.0-27-generic.efi.signed root=UUID=59a4aa70-da9c-4d13-8403-987b618e6372 ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 7980084K/8273480K available (9060K kernel code, 1666K rwdata, 3824K rodata, 2228K init, 2364K bss, 293396K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000] NR_IRQS:524544 nr_irqs:1024 16 [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Detected 2500.000 MHz processor [ 0.000026] Calibrating delay loop (skipped), value calculated using timer frequency.. 4992.00 BogoMIPS (lpj=9984000) [ 0.000028] pid_max: default: 32768 minimum: 301 [ 0.000038] ACPI: Core revision 20160930 [ 0.040967] ACPI: 8 ACPI AML tables successfully acquired and loaded [ 0.041755] Security Framework initialized [ 0.041756] Yama: becoming mindful. [ 0.041770] AppArmor: AppArmor initialized [ 0.042230] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.044028] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.044804] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.044811] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.045092] CPU: Physical Processor ID: 0 [ 0.045092] CPU: Processor Core ID: 0 [ 0.045097] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.045097] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.045103] mce: CPU supports 8 MCE banks [ 0.045113] CPU0: Thermal monitoring enabled (TM1) [ 0.045130] process: using mwait in idle threads [ 0.045132] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.045133] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.045246] Freeing SMP alternatives memory: 32K [ 0.046922] efi_bgrt: Ignoring BGRT: Incorrect BMP magic number 0x0 (expected 0x4d42) [ 0.047833] ftrace: allocating 34206 entries in 134 pages [ 0.065753] smpboot: Max logical packages: 2 [ 0.065758] DMAR: Host address width 39 [ 0.065759] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.065767] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e3ff0505e [ 0.065768] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.065772] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da [ 0.065773] DMAR: RMRR base: 0x000000ab48e000 end: 0x000000ab4adfff [ 0.065774] DMAR: RMRR base: 0x000000ad800000 end: 0x000000afffffff [ 0.065778] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.065779] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.065780] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit. [ 0.065780] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting. [ 0.067276] DMAR-IR: Enabled IRQ remapping in xapic mode [ 0.067276] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.071191] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.110885] TSC deadline timer enabled [ 0.110890] smpboot: CPU0: Intel(R) Core(TM) i5-6300U CPU @ 2.40GHz (family: 0x6, model: 0x4e, stepping: 0x3) [ 0.110946] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver. [ 0.110979] ... version: 4 [ 0.110979] ... bit width: 48 [ 0.110980] ... generic registers: 4 [ 0.110980] ... value mask: 0000ffffffffffff [ 0.110981] ... max period: 00007fffffffffff [ 0.110981] ... fixed-purpose events: 3 [ 0.110982] ... event mask: 000000070000000f [ 0.111883] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.111896] smp: Bringing up secondary CPUs ... [ 0.111958] x86: Booting SMP configuration: [ 0.111959] .... node #0, CPUs: #1 #2 #3 [ 0.113793] smp: Brought up 1 node, 4 CPUs [ 0.113795] smpboot: Total of 4 processors activated (19968.00 BogoMIPS) [ 0.118308] devtmpfs: initialized [ 0.118362] x86/mm: Memory block size: 128MB [ 0.121525] evm: security.selinux [ 0.121525] evm: security.SMACK64 [ 0.121526] evm: security.SMACK64EXEC [ 0.121526] evm: security.SMACK64TRANSMUTE [ 0.121526] evm: security.SMACK64MMAP [ 0.121527] evm: security.ima [ 0.121527] evm: security.capability [ 0.121581] PM: Registering ACPI NVS region [mem 0x9d088000-0x9d088fff] (4096 bytes) [ 0.121582] PM: Registering ACPI NVS region [mem 0xabbc5000-0xabef3fff] (3338240 bytes) [ 0.121675] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.121684] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.121725] pinctrl core: initialized pinctrl subsystem [ 0.121889] RTC time: 21:27:42, date: 07/29/17 [ 0.121978] NET: Registered protocol family 16 [ 0.138008] cpuidle: using governor ladder [ 0.154029] cpuidle: using governor menu [ 0.154031] PCCT header not found. [ 0.154088] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.154089] ACPI: bus type PCI registered [ 0.154090] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.154163] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000) [ 0.154165] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820 [ 0.154172] PCI: Using configuration type 1 for base access [ 0.154178] dmi type 0xB1 record - unknown flag [ 0.170150] HugeTLB registered 1 GB page size, pre-allocated 0 pages [ 0.170151] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.170403] ACPI: Added _OSI(Module Device) [ 0.170403] ACPI: Added _OSI(Processor Device) [ 0.170404] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.170405] ACPI: Added _OSI(Processor Aggregator Device) [ 0.173188] ACPI: Executed 27 blocks of module-level executable AML code [ 0.183466] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.196868] ACPI: Dynamic OEM Table Load: [ 0.196876] ACPI: SSDT 0xFFFF9459C3F1E800 00063F (v02 PmRef Cpu0Ist 00003000 INTL 20120913) [ 0.197118] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked [ 0.198433] ACPI: Dynamic OEM Table Load: [ 0.198438] ACPI: SSDT 0xFFFF9459C38F4800 00037F (v02 PmRef Cpu0Cst 00003001 INTL 20120913) [ 0.199326] ACPI: Dynamic OEM Table Load: [ 0.199331] ACPI: SSDT 0xFFFF9459C3F19800 0005AA (v02 PmRef ApIst 00003000 INTL 20120913) [ 0.199897] ACPI: Dynamic OEM Table Load: [ 0.199901] ACPI: SSDT 0xFFFF9459C38F3800 000119 (v02 PmRef ApCst 00003000 INTL 20120913) [ 0.202133] ACPI : EC: EC started [ 0.202134] ACPI : EC: interrupt blocked [ 0.205678] ACPI: \_SB_.PCI0.LPCB.ECDV: Used as first EC [ 0.205680] ACPI: \_SB_.PCI0.LPCB.ECDV: GPE=0x14, EC_CMD/EC_SC=0x934, EC_DATA=0x930 [ 0.205681] ACPI: \_SB_.PCI0.LPCB.ECDV: Used as boot DSDT EC to handle transactions [ 0.205682] ACPI: Interpreter enabled [ 0.205729] ACPI: (supports S0 S3 S4 S5) [ 0.205730] ACPI: Using IOAPIC for interrupt routing [ 0.205770] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.207359] ACPI: Power Resource [PG00] (on) [ 0.207737] ACPI: Power Resource [PG01] (on) [ 0.208099] ACPI: Power Resource [PG02] (on) [ 0.212478] ACPI: Power Resource [WRST] (off) [ 0.212841] ACPI: Power Resource [WRST] (off) [ 0.213212] ACPI: Power Resource [WRST] (off) [ 0.213570] ACPI: Power Resource [WRST] (off) [ 0.213928] ACPI: Power Resource [WRST] (off) [ 0.214577] ACPI: Power Resource [WRST] (off) [ 0.214936] ACPI: Power Resource [WRST] (off) [ 0.215294] ACPI: Power Resource [WRST] (off) [ 0.216523] ACPI: Power Resource [WRST] (off) [ 0.216879] ACPI: Power Resource [WRST] (off) [ 0.217245] ACPI: Power Resource [WRST] (off) [ 0.217610] ACPI: Power Resource [WRST] (off) [ 0.217979] ACPI: Power Resource [WRST] (off) [ 0.218336] ACPI: Power Resource [WRST] (off) [ 0.218694] ACPI: Power Resource [WRST] (off) [ 0.219050] ACPI: Power Resource [WRST] (off) [ 0.219416] ACPI: Power Resource [WRST] (off) [ 0.233640] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e]) [ 0.233646] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.235122] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 0.235123] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.235717] PCI host bridge to bus 0000:00 [ 0.235719] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.235720] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.235721] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.235722] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] [ 0.235723] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window] [ 0.235724] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] [ 0.235725] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window] [ 0.235726] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] [ 0.235727] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 0.235728] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 0.235729] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 0.235730] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] [ 0.235731] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window] [ 0.235731] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window] [ 0.235732] pci_bus 0000:00: root bus resource [mem 0xb0000000-0xefffffff window] [ 0.235733] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window] [ 0.235735] pci_bus 0000:00: root bus resource [bus 00-7e] [ 0.235743] pci 0000:00:00.0: [8086:1904] type 00 class 0x060000 [ 0.235881] pci 0000:00:02.0: [8086:1916] type 00 class 0x030000 [ 0.235891] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe0ffffff 64bit] [ 0.235898] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.235903] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] [ 0.236058] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000 [ 0.236070] pci 0000:00:04.0: reg 0x10: [mem 0xe1240000-0xe1247fff 64bit] [ 0.236297] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330 [ 0.236318] pci 0000:00:14.0: reg 0x10: [mem 0xe1230000-0xe123ffff 64bit] [ 0.236395] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.236517] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.236555] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000 [ 0.236575] pci 0000:00:14.2: reg 0x10: [mem 0xe1257000-0xe1257fff 64bit] [ 0.236756] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000 [ 0.236772] pci 0000:00:16.0: reg 0x10: [mem 0xe1256000-0xe1256fff 64bit] [ 0.236830] pci 0000:00:16.0: PME# supported from D3hot [ 0.236967] pci 0000:00:16.3: [8086:9d3d] type 00 class 0x070002 [ 0.236981] pci 0000:00:16.3: reg 0x10: [io 0xf0a0-0xf0a7] [ 0.236987] pci 0000:00:16.3: reg 0x14: [mem 0xe1255000-0xe1255fff] [ 0.237149] pci 0000:00:17.0: [8086:282a] type 00 class 0x010400 [ 0.237163] pci 0000:00:17.0: reg 0x10: [mem 0xe1250000-0xe1251fff] [ 0.237171] pci 0000:00:17.0: reg 0x14: [mem 0xe1254000-0xe12540ff] [ 0.237178] pci 0000:00:17.0: reg 0x18: [io 0xf090-0xf097] [ 0.237186] pci 0000:00:17.0: reg 0x1c: [io 0xf080-0xf083] [ 0.237193] pci 0000:00:17.0: reg 0x20: [io 0xf060-0xf07f] [ 0.237201] pci 0000:00:17.0: reg 0x24: [mem 0xe1253000-0xe12537ff] [ 0.237244] pci 0000:00:17.0: PME# supported from D3hot [ 0.237398] pci 0000:00:1c.0: [8086:9d14] type 01 class 0x060400 [ 0.237479] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.237617] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.237675] pci 0000:00:1d.0: [8086:9d1a] type 01 class 0x060400 [ 0.237742] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.237873] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.237941] pci 0000:00:1f.0: [8086:9d48] type 00 class 0x060100 [ 0.238182] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000 [ 0.238192] pci 0000:00:1f.2: reg 0x10: [mem 0xe124c000-0xe124ffff] [ 0.238367] pci 0000:00:1f.3: [8086:9d70] type 00 class 0x040300 [ 0.238389] pci 0000:00:1f.3: reg 0x10: [mem 0xe1248000-0xe124bfff 64bit] [ 0.238416] pci 0000:00:1f.3: reg 0x20: [mem 0xe1220000-0xe122ffff 64bit] [ 0.238468] pci 0000:00:1f.3: PME# supported from D3hot D3cold [ 0.238648] pci 0000:00:1f.3: System wakeup disabled by ACPI [ 0.238686] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500 [ 0.238733] pci 0000:00:1f.4: reg 0x10: [mem 0xe1252000-0xe12520ff 64bit] [ 0.238802] pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f] [ 0.239010] pci 0000:00:1f.6: [8086:156f] type 00 class 0x020000 [ 0.239028] pci 0000:00:1f.6: reg 0x10: [mem 0xe1200000-0xe121ffff] [ 0.239119] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold [ 0.239725] pci 0000:00:1f.6: System wakeup disabled by ACPI [ 0.240161] pci 0000:01:00.0: [8086:24f3] type 00 class 0x028000 [ 0.240472] pci 0000:01:00.0: reg 0x10: [mem 0xe1100000-0xe1101fff 64bit] [ 0.240915] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.241172] pci 0000:01:00.0: System wakeup disabled by ACPI [ 0.252481] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.252486] pci 0000:00:1c.0: bridge window [mem 0xe1100000-0xe11fffff] [ 0.252565] pci 0000:02:00.0: [10ec:525a] type 00 class 0xff0000 [ 0.252597] pci 0000:02:00.0: reg 0x14: [mem 0xe1000000-0xe1000fff] [ 0.252722] pci 0000:02:00.0: supports D1 D2 [ 0.252723] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.252821] pci 0000:02:00.0: System wakeup disabled by ACPI [ 0.264277] pci 0000:00:1d.0: PCI bridge to [bus 02] [ 0.264282] pci 0000:00:1d.0: bridge window [mem 0xe1000000-0xe10fffff] [ 0.267460] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.267509] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.267556] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.267603] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.267650] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.267696] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.267742] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.267789] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.269289] ACPI: Enabled 5 GPEs in block 00 to 7F [ 0.269416] ACPI : EC: interrupt unblocked [ 0.269428] ACPI : EC: event unblocked [ 0.269451] ACPI: \_SB_.PCI0.LPCB.ECDV: GPE=0x14, EC_CMD/EC_SC=0x934, EC_DATA=0x930 [ 0.269452] ACPI: \_SB_.PCI0.LPCB.ECDV: Used as boot DSDT EC to handle transactions and events [ 0.269895] SCSI subsystem initialized [ 0.270142] libata version 3.00 loaded. [ 0.270183] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.270184] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.270188] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.270188] vgaarb: loaded [ 0.270204] ACPI: bus type USB registered [ 0.270219] usbcore: registered new interface driver usbfs [ 0.270225] usbcore: registered new interface driver hub [ 0.270239] usbcore: registered new device driver usb [ 0.270313] Registered efivars operations [ 0.274978] PCI: Using ACPI for IRQ routing [ 0.290265] PCI: pci_cache_line_size set to 64 bytes [ 0.290770] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] [ 0.290771] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff] [ 0.290772] e820: reserve RAM buffer [mem 0x9b2fc018-0x9bffffff] [ 0.290773] e820: reserve RAM buffer [mem 0x9b30d018-0x9bffffff] [ 0.290775] e820: reserve RAM buffer [mem 0x9b32b018-0x9bffffff] [ 0.290775] e820: reserve RAM buffer [mem 0x9b676000-0x9bffffff] [ 0.290776] e820: reserve RAM buffer [mem 0x9d088000-0x9fffffff] [ 0.290777] e820: reserve RAM buffer [mem 0x9d109000-0x9fffffff] [ 0.290778] e820: reserve RAM buffer [mem 0xab388000-0xabffffff] [ 0.290779] e820: reserve RAM buffer [mem 0xabbc5000-0xabffffff] [ 0.290780] e820: reserve RAM buffer [mem 0xac500000-0xafffffff] [ 0.290781] e820: reserve RAM buffer [mem 0x24e000000-0x24fffffff]
Offline
#3 2017-07-30 00:11:16
dominika - Użytkownik
- dominika
- Użytkownik
- Zarejestrowany: 2017-07-29
Re: Czytnik kart pamięci nie widzi karty microSD.
dmesg (po włożeniu czytnika) cz.2:
Kod:
[ 0.290870] NetLabel: Initializing [ 0.290871] NetLabel: domain hash size = 128 [ 0.290871] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.290888] NetLabel: unlabeled traffic allowed by default [ 0.291000] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.291005] hpet0: 8 comparators, 64-bit 24.000000 MHz counter [ 0.293046] clocksource: Switched to clocksource hpet [ 0.300366] VFS: Disk quotas dquot_6.6.0 [ 0.300382] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.300473] AppArmor: AppArmor Filesystem Enabled [ 0.300510] pnp: PnP ACPI init [ 0.300785] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.300787] system 00:00: [io 0xffff] has been reserved [ 0.300788] system 00:00: [io 0xffff] has been reserved [ 0.300789] system 00:00: [io 0xffff] has been reserved [ 0.300790] system 00:00: [io 0x1800-0x18fe] has been reserved [ 0.300791] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.300795] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.300909] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.300947] system 00:02: [io 0x1854-0x1857] has been reserved [ 0.300949] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.301031] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.301089] pnp 00:04: Plug and Play ACPI device, IDs DLL06dc PNP0f13 (active) [ 0.302405] pnp 00:05: Plug and Play ACPI device, IDs PNP0401 (disabled) [ 0.302646] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.302647] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.302648] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.302650] system 00:06: [mem 0xf0000000-0xf7ffffff] has been reserved [ 0.302651] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.302652] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.302653] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.302655] system 00:06: [mem 0xff000000-0xffffffff] has been reserved [ 0.302656] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.302657] system 00:06: [mem 0xeffe0000-0xefffffff] has been reserved [ 0.302659] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.302699] system 00:07: [mem 0xfd000000-0xfdabffff] has been reserved [ 0.302700] system 00:07: [mem 0xfdad0000-0xfdadffff] has been reserved [ 0.302701] system 00:07: [mem 0xfdb00000-0xfdffffff] has been reserved [ 0.302703] system 00:07: [mem 0xfe000000-0xfe01ffff] could not be reserved [ 0.302704] system 00:07: [mem 0xfe036000-0xfe03bfff] has been reserved [ 0.302705] system 00:07: [mem 0xfe03d000-0xfe3fffff] has been reserved [ 0.302708] system 00:07: [mem 0xfe410000-0xfe7fffff] has been reserved [ 0.302710] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.303026] system 00:08: [io 0xff00-0xfffe] has been reserved [ 0.303028] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.304277] system 00:09: [mem 0xfe029000-0xfe029fff] has been reserved [ 0.304278] system 00:09: [mem 0xfe028000-0xfe028fff] has been reserved [ 0.304280] system 00:09: [mem 0xfdaf0000-0xfdafffff] has been reserved [ 0.304281] system 00:09: [mem 0xfdae0000-0xfdaeffff] has been reserved [ 0.304282] system 00:09: [mem 0xfdac0000-0xfdacffff] has been reserved [ 0.304284] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.304893] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c31 (active) [ 0.309235] pnp: PnP ACPI: found 11 devices [ 0.316164] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.316185] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.316191] pci 0000:00:1c.0: bridge window [mem 0xe1100000-0xe11fffff] [ 0.316198] pci 0000:00:1d.0: PCI bridge to [bus 02] [ 0.316202] pci 0000:00:1d.0: bridge window [mem 0xe1000000-0xe10fffff] [ 0.316209] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.316210] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.316211] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.316212] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] [ 0.316213] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window] [ 0.316214] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window] [ 0.316215] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window] [ 0.316216] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window] [ 0.316217] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window] [ 0.316218] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window] [ 0.316218] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window] [ 0.316219] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window] [ 0.316220] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window] [ 0.316221] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window] [ 0.316222] pci_bus 0000:00: resource 18 [mem 0xb0000000-0xefffffff window] [ 0.316223] pci_bus 0000:00: resource 19 [mem 0xfd000000-0xfe7fffff window] [ 0.316224] pci_bus 0000:01: resource 1 [mem 0xe1100000-0xe11fffff] [ 0.316225] pci_bus 0000:02: resource 1 [mem 0xe1000000-0xe10fffff] [ 0.316359] NET: Registered protocol family 2 [ 0.316507] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.316648] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.316828] TCP: Hash tables configured (established 65536 bind 65536) [ 0.316849] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.316877] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.316927] NET: Registered protocol family 1 [ 0.316938] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.318403] PCI: CLS 0 bytes, default 64 [ 0.318451] Unpacking initramfs... [ 1.000080] Freeing initrd memory: 40840K [ 1.000114] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.000116] software IO TLB [mem 0xa6d28000-0xaad28000] (64MB) mapped at [ffff945826d28000-ffff94582ad27fff] [ 1.000289] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23fa772cf26, max_idle_ns: 440795269835 ns [ 1.000381] Scanning for low memory corruption every 60 seconds [ 1.000721] audit: initializing netlink subsys (disabled) [ 1.000788] audit: type=2000 audit(1501363662.984:1): initialized [ 1.001234] Initialise system trusted keyrings [ 1.001357] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [ 1.002761] zbud: loaded [ 1.003189] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.003394] fuse init (API version 7.26) [ 1.005156] Key type asymmetric registered [ 1.005156] Asymmetric key parser 'x509' registered [ 1.005188] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 1.005237] io scheduler noop registered [ 1.005237] io scheduler deadline registered [ 1.005244] io scheduler cfq registered (default) [ 1.005875] pcieport 0000:00:1c.0: AER enabled with IRQ 122 [ 1.005893] pcieport 0000:00:1d.0: AER enabled with IRQ 123 [ 1.005906] pcieport 0000:00:1c.0: Signaling PME with IRQ 122 [ 1.005915] pcieport 0000:00:1d.0: Signaling PME with IRQ 123 [ 1.005955] efifb: probing for efifb [ 1.005969] efifb: framebuffer at 0xd0000000, using 8100k, total 8100k [ 1.005970] efifb: mode is 1920x1080x32, linelength=7680, pages=1 [ 1.005970] efifb: scrolling: redraw [ 1.005972] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.006090] Console: switching to colour frame buffer device 240x67 [ 1.006114] fb0: EFI VGA frame buffer device [ 1.006120] intel_idle: MWAIT substates: 0x11142120 [ 1.006121] intel_idle: v0.4.1 model 0x4E [ 1.006349] intel_idle: lapic_timer_reliable_states 0xffffffff [ 1.007484] ACPI: AC Adapter [AC] (off-line) [ 1.008038] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 1.008057] ACPI: Lid Switch [LID0] [ 1.008087] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 1.008089] ACPI: Power Button [PBTN] [ 1.008116] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 [ 1.008117] ACPI: Sleep Button [SBTN] [ 1.008148] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 1.008149] ACPI: Power Button [PWRF] [ 1.009549] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 1.010099] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.010100] ACPI: Thermal Zone [THM] (25 C) [ 1.010131] GHES: HEST is not enabled! [ 1.010252] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.012064] serial 0000:00:16.3: enabling device (0000 -> 0003) [ 1.032728] 0000:00:16.3: ttyS4 at I/O 0xf0a0 (irq = 19, base_baud = 115200) is a 16550A [ 1.033612] Linux agpgart interface v0.103 [ 1.038052] ACPI: Battery Slot [BAT0] (battery present) [ 1.065304] tpm_tis 00:0a: 1.2 TPM (device-id 0xFE, rev-id 2) [ 1.196520] loop: module loaded [ 1.196676] libphy: Fixed MDIO Bus: probed [ 1.196676] tun: Universal TUN/TAP device driver, 1.6 [ 1.196677] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 1.196721] PPP generic driver version 2.4.2 [ 1.196783] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.196785] ehci-pci: EHCI PCI platform driver [ 1.196794] ehci-platform: EHCI generic platform driver [ 1.196806] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.196807] ohci-pci: OHCI PCI platform driver [ 1.196814] ohci-platform: OHCI generic platform driver [ 1.196819] uhci_hcd: USB Universal Host Controller Interface driver [ 1.197003] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.197009] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 1.198101] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810 [ 1.198106] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 1.198212] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.198213] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.198214] usb usb1: Product: xHCI Host Controller [ 1.198215] usb usb1: Manufacturer: Linux 4.10.0-27-generic xhci-hcd [ 1.198215] usb usb1: SerialNumber: 0000:00:14.0 [ 1.198316] hub 1-0:1.0: USB hub found [ 1.198331] hub 1-0:1.0: 12 ports detected [ 1.207081] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.207084] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 1.207110] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.207111] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.207112] usb usb2: Product: xHCI Host Controller [ 1.207113] usb usb2: Manufacturer: Linux 4.10.0-27-generic xhci-hcd [ 1.207114] usb usb2: SerialNumber: 0000:00:14.0 [ 1.207251] hub 2-0:1.0: USB hub found [ 1.207261] hub 2-0:1.0: 6 ports detected [ 1.211965] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.212514] i8042: Warning: Keylock active [ 1.218428] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.218431] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.218646] mousedev: PS/2 mouse device common for all mice [ 1.219098] rtc_cmos 00:01: RTC can wake from S4 [ 1.219585] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 1.219699] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 1.219706] i2c /dev entries driver [ 1.219752] device-mapper: uevent: version 1.0.3 [ 1.219861] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.219866] intel_pstate: Intel P-state driver initializing [ 1.220298] intel_pstate: HWP enabled [ 1.220342] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 1.221770] ledtrig-cpu: registered to indicate activity on CPUs [ 1.221793] EFI Variables Facility v0.08 2004-May-17 [ 1.227445] intel_pmc_core 0000:00:1f.2: enabling device (0000 -> 0002) [ 1.227636] NET: Registered protocol family 10 [ 1.230890] Segment Routing with IPv6 [ 1.230904] NET: Registered protocol family 17 [ 1.230911] Key type dns_resolver registered [ 1.231242] microcode: sig=0x406e3, pf=0x80, revision=0x9e [ 1.231403] microcode: Microcode Update Driver: v2.2. [ 1.231974] EFI: Loaded cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' linked to '.builtin_trusted_keys' [ 1.231989] EFI: Loaded cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' linked to '.builtin_trusted_keys' [ 1.233803] EFI: Loaded cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63' linked to '.builtin_trusted_keys' [ 1.233948] EFI: Loaded cert 'Microsoft Windows PCA 2010: d14fa98a0708cef4241898e500fff3d6791d37bc' linked to '.system_blacklist_keyring' [ 1.233955] registered taskstats version 1 [ 1.233965] Loading compiled-in X.509 certificates [ 1.235982] Loaded X.509 cert 'Build time autogenerated kernel key: 8f6a26ed9a783577bc61518508a0bfc9a7f8e602' [ 1.235994] zswap: loaded using pool lzo/zbud [ 1.245785] Key type big_key registered [ 1.245787] Key type trusted registered [ 1.247423] Key type encrypted registered [ 1.247424] AppArmor: AppArmor sha1 policy hashing enabled [ 1.533270] usb 1-1: new full-speed USB device number 2 using xhci_hcd [ 1.569405] evm: HMAC attrs: 0x1 [ 1.570273] Magic number: 9:341:501 [ 1.570489] rtc_cmos 00:01: setting system clock to 2017-07-29 21:27:44 UTC (1501363664) [ 1.570725] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.570742] EDD information not available. [ 1.572018] Freeing unused kernel memory: 2228K [ 1.572024] Write protecting the kernel read-only data: 14336k [ 1.572382] Freeing unused kernel memory: 1164K [ 1.572874] Freeing unused kernel memory: 272K [ 1.577981] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.586283] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.586334] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.586341] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.586795] random: udevadm: uninitialized urandom read (16 bytes read) [ 1.586817] random: udevadm: uninitialized urandom read (16 bytes read) [ 1.587659] random: udevadm: uninitialized urandom read (16 bytes read) [ 1.587691] random: udevadm: uninitialized urandom read (16 bytes read) [ 1.587699] random: udevadm: uninitialized urandom read (16 bytes read) [ 1.587970] random: udevadm: uninitialized urandom read (16 bytes read) [ 1.588001] random: udevadm: uninitialized urandom read (16 bytes read) [ 1.608119] FUJITSU Extended Socket Network Device Driver - version 1.2 - Copyright (c) 2015 FUJITSU LIMITED [ 1.611817] hidraw: raw HID events driver (C) Jiri Kosina [ 1.627676] wmi: Mapper loaded [ 1.631518] ahci 0000:00:17.0: version 3.0 [ 1.631757] rtsx_pci 0000:02:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 125 [ 1.631757] ahci 0000:00:17.0: SSS flag set, parallel bus scan disabled [ 1.631823] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 3 ports 6 Gbps 0x7 impl RAID mode [ 1.631824] ahci 0000:00:17.0: flags: 64bit ncq ilck stag pm led clo only pio slum part sxs deso sadm sds apst [ 1.633007] pps_core: LinuxPPS API ver. 1 registered [ 1.633008] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 1.633015] [drm] Initialized [ 1.633188] scsi host0: ahci [ 1.633299] scsi host1: ahci [ 1.633382] scsi host2: ahci [ 1.633414] ata1: SATA max UDMA/133 abar m2048@0xe1253000 port 0xe1253100 irq 126 [ 1.633415] ata2: SATA max UDMA/133 abar m2048@0xe1253000 port 0xe1253180 irq 126 [ 1.633416] ata3: SATA max UDMA/133 abar m2048@0xe1253000 port 0xe1253200 irq 126 [ 1.634386] PTP clock support registered [ 1.639308] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.639309] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.639339] e1000e 0000:00:1f.6: enabling device (0000 -> 0002) [ 1.639572] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.683995] usb 1-1: New USB device found, idVendor=046d, idProduct=c52f [ 1.683997] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.683997] usb 1-1: Product: USB Receiver [ 1.683998] usb 1-1: Manufacturer: Logitech [ 1.827354] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock [ 1.861286] usb 1-2: new high-speed USB device number 3 using xhci_hcd [ 1.893680] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) d4:81:d7:6c:64:e9 [ 1.893682] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection [ 1.893750] e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF [ 1.894360] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth0 [ 1.894552] [drm] Memory usable by graphics device = 4096M [ 1.894554] checking generic (d0000000 7e9000) vs hw (d0000000 10000000) [ 1.894554] fb: switching to inteldrmfb from EFI VGA [ 1.894593] Console: switching to colour dummy device 80x25 [ 1.894672] [drm] Replacing VGA console driver [ 1.900363] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.900363] [drm] Driver supports precise vblank timestamp query. [ 1.903038] [drm] Finished loading i915/skl_dmc_ver1_26.bin (v1.26) [ 1.903939] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 1.930654] [drm] GuC firmware load skipped [ 1.949429] ata1: SATA link down (SStatus 4 SControl 300) [ 1.951266] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 1.952156] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7 [ 1.952226] [drm] Initialized i915 1.6.0 20161121 for 0000:00:02.0 on minor 0 [ 1.971907] fbcon: inteldrmfb (fb0) is primary device [ 1.971964] Console: switching to colour frame buffer device 240x67 [ 1.971988] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 2.024914] usb 1-2: New USB device found, idVendor=0bda, idProduct=5686 [ 2.024915] usb 1-2: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 2.024916] usb 1-2: Product: Integrated_Webcam_HD [ 2.024916] usb 1-2: Manufacturer: CNFEH53M515080020592 [ 2.024917] usb 1-2: SerialNumber: 0001 [ 2.025317] clocksource: Switched to clocksource tsc [ 2.145264] usb 1-7: new full-speed USB device number 4 using xhci_hcd [ 2.262335] ata2: SATA link down (SStatus 0 SControl 300) [ 2.322889] usb 1-7: New USB device found, idVendor=0a5c, idProduct=5834 [ 2.322890] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.322891] usb 1-7: Product: 5880 [ 2.322892] usb 1-7: Manufacturer: Broadcom Corp [ 2.322892] usb 1-7: SerialNumber: 0123456789ABCD [ 2.323135] usb 1-7: config 0 descriptor?? [ 2.521135] usb 1-8: new full-speed USB device number 5 using xhci_hcd [ 2.521248] random: fast init done [ 2.576412] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.577379] ata3.00: ATA-10: INTEL SSDSCKKF256H6 SATA 256GB, LBFD07N, max UDMA/133 [ 2.577381] ata3.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.578363] ata3.00: configured for UDMA/133 [ 2.578656] scsi 2:0:0:0: Direct-Access ATA INTEL SSDSCKKF25 D07N PQ: 0 ANSI: 5 [ 2.609461] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 2.609500] sd 2:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB) [ 2.609514] sd 2:0:0:0: [sda] Write Protect is off [ 2.609515] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.609600] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.612157] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 [ 2.612734] sd 2:0:0:0: [sda] Attached SCSI disk [ 2.666872] usb 1-8: New USB device found, idVendor=8087, idProduct=0a2b [ 2.666873] usb 1-8: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.672993] usbcore: registered new interface driver usbhid [ 2.673011] usbhid: USB HID core driver [ 2.674580] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:046D:C52F.0001/input/input8 [ 2.674662] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-1/input0 [ 2.675388] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:046D:C52F.0002/input/input9 [ 2.676199] input: AlpsPS/2 ALPS DualPoint Stick as /devices/platform/i8042/serio1/input/input10 [ 2.733454] hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-1/input1 [ 2.750217] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input6 [ 2.859112] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) [ 2.949020] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN) [ 2.949123] systemd[1]: Detected architecture x86-64. [ 2.949301] systemd[1]: Set hostname to <dominika>. [ 3.004755] systemd[1]: Listening on udev Control Socket. [ 3.004806] systemd[1]: Listening on Journal Socket (/dev/log). [ 3.004823] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 3.004833] systemd[1]: Listening on fsck to fsckd communication Socket. [ 3.004838] systemd[1]: Reached target Remote File Systems (Pre). [ 3.004843] systemd[1]: Reached target Remote File Systems. [ 3.004968] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 3.030234] lp: driver loaded but no devices found [ 3.033551] ppdev: user-space parallel port driver [ 3.035688] parport_pc 00:05: [io 0x0378-0x037b] [ 3.035975] parport_pc 00:05: [irq 5] [ 3.038396] parport_pc 00:05: activated [ 3.038398] parport_pc 00:05: reported by Plug and Play ACPI [ 3.075050] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro [ 3.081729] systemd-journald[251]: Received request to flush runtime journal from PID 1 [ 3.156109] input: DELL Wireless hotkeys as /devices/virtual/input/input11 [ 3.169002] Bluetooth: Core ver 2.22 [ 3.169015] NET: Registered protocol family 31 [ 3.169015] Bluetooth: HCI device and connection manager initialized [ 3.169018] Bluetooth: HCI socket layer initialized [ 3.169020] Bluetooth: L2CAP socket layer initialized [ 3.169025] Bluetooth: SCO socket layer initialized [ 3.173187] int3403 thermal: probe of INT3403:02 failed with error -22 [ 3.179000] Bluetooth: HCI UART driver ver 2.3 [ 3.179001] Bluetooth: HCI UART protocol H4 registered [ 3.179002] Bluetooth: HCI UART protocol BCSP registered [ 3.179002] Bluetooth: HCI UART protocol LL registered [ 3.179003] Bluetooth: HCI UART protocol ATH3K registered [ 3.179003] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 3.179033] Bluetooth: HCI UART protocol Intel registered [ 3.179045] Bluetooth: HCI UART protocol Broadcom registered [ 3.179046] Bluetooth: HCI UART protocol QCA registered [ 3.179047] Bluetooth: HCI UART protocol AG6XX registered [ 3.179047] Bluetooth: HCI UART protocol Marvell registered [ 3.187826] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 3.190472] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 3.190829] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002) [ 3.202459] usbcore: registered new interface driver btusb [ 3.202937] Bluetooth: hci0: Bootloader revision 0.0 build 2 week 52 2014 [ 3.215297] media: Linux media interface: v0.10 [ 3.216180] Bluetooth: hci0: Device revision is 5 [ 3.216180] Bluetooth: hci0: Secure boot is enabled [ 3.216181] Bluetooth: hci0: OTP lock is enabled [ 3.216181] Bluetooth: hci0: API lock is enabled [ 3.216182] Bluetooth: hci0: Debug lock is disabled [ 3.216183] Bluetooth: hci0: Minimum firmware build 1 week 10 2014 [ 3.220556] Bluetooth: hci0: Found device firmware: intel/ibt-11-5.sfi [ 3.221985] Linux video capture interface: v2.00 [ 3.227036] mei_me 0000:00:16.0: enabling device (0000 -> 0002) [ 3.236436] Intel(R) Wireless WiFi driver for Linux [ 3.236438] Copyright(c) 2003- 2015 Intel Corporation [ 3.236758] iwlwifi 0000:01:00.0: enabling device (0000 -> 0002) [ 3.245422] iwlwifi 0000:01:00.0: Direct firmware load for iwlwifi-8000C-26.ucode failed with error -2 [ 3.246056] iwlwifi 0000:01:00.0: Direct firmware load for iwlwifi-8000C-25.ucode failed with error -2 [ 3.246057] uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (0bda:5686) [ 3.246549] iwlwifi 0000:01:00.0: Direct firmware load for iwlwifi-8000C-24.ucode failed with error -2 [ 3.247143] iwlwifi 0000:01:00.0: Direct firmware load for iwlwifi-8000C-23.ucode failed with error -2 [ 3.247156] iwlwifi 0000:01:00.0: Direct firmware load for iwlwifi-8000C-22.ucode failed with error -2 [ 3.247551] uvcvideo 1-2:1.0: Entity type for entity Extension 4 was not initialized! [ 3.247554] uvcvideo 1-2:1.0: Entity type for entity Extension 7 was not initialized! [ 3.247555] uvcvideo 1-2:1.0: Entity type for entity Processing 2 was not initialized! [ 3.247556] uvcvideo 1-2:1.0: Entity type for entity Camera 1 was not initialized! [ 3.247626] input: Integrated_Webcam_HD as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/input/input12 [ 3.247687] usbcore: registered new interface driver uvcvideo [ 3.247688] USB Video Class driver (1.1.1) [ 3.254204] iwlwifi 0000:01:00.0: loaded firmware version 21.302800.0 op_mode iwlmvm [ 3.267084] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer [ 3.267086] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 3.267086] RAPL PMU: hw unit of domain package 2^-14 Joules [ 3.267087] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 3.267088] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 3.267088] RAPL PMU: hw unit of domain psys 2^-14 Joules [ 3.280363] iwlwifi 0000:01:00.0: Detected Intel(R) Dual Band Wireless AC 8260, REV=0x208 [ 3.282075] iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled [ 3.283197] iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled [ 3.289477] AVX2 version of gcm_enc/dec engaged. [ 3.289478] AES CTR mode by8 optimization enabled [ 3.322665] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 3.346641] dell_laptop: Using i8042 filter function for receiving events [ 3.395472] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) [ 3.409079] intel_rapl: Found RAPL domain package [ 3.409080] intel_rapl: Found RAPL domain core [ 3.409081] intel_rapl: Found RAPL domain uncore [ 3.409082] intel_rapl: Found RAPL domain dram [ 3.422013] dell_wmi: Detected Dell WMI interface version 1 [ 3.422070] input: Dell WMI hotkeys as /devices/virtual/input/input13 [ 3.434040] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 3.434328] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 3.434345] thermal thermal_zone7: failed to read out thermal zone (-5) [ 3.473100] iwlwifi 0000:01:00.0 wlp1s0: renamed from wlan0 [ 3.535651] Adding 8273916k swap on /dev/sda7. Priority:-1 extents:1 across:8273916k SSFS [ 3.693616] random: crng init done [ 3.817405] [drm] RC6 on [ 4.267465] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 4.294732] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3235: line_outs=1 (0x16/0x0/0x0/0x0/0x0) type:line [ 4.294734] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=1 (0x14/0x0/0x0/0x0/0x0) [ 4.294734] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0) [ 4.294735] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 4.294736] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 4.294737] snd_hda_codec_realtek hdaudioC0D0: Headphone Mic=0x18 [ 4.294737] snd_hda_codec_realtek hdaudioC0D0: Dock Mic=0x19 [ 4.294738] snd_hda_codec_realtek hdaudioC0D0: Headset Mic=0x1a [ 4.294739] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x13 [ 4.319067] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14 [ 4.319314] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15 [ 4.319427] input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16 [ 4.319522] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17 [ 4.319599] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18 [ 4.319665] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19 [ 4.527358] audit: type=1400 audit(1501363667.450:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=708 comm="apparmor_parser" [ 4.527360] audit: type=1400 audit(1501363667.450:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=708 comm="apparmor_parser" [ 4.527361] audit: type=1400 audit(1501363667.450:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=708 comm="apparmor_parser" [ 4.527361] audit: type=1400 audit(1501363667.450:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=708 comm="apparmor_parser" [ 4.528219] audit: type=1400 audit(1501363667.450:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=707 comm="apparmor_parser" [ 4.528220] audit: type=1400 audit(1501363667.450:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=707 comm="apparmor_parser" [ 4.529463] audit: type=1400 audit(1501363667.454:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="webbrowser-app" pid=711 comm="apparmor_parser" [ 4.529465] audit: type=1400 audit(1501363667.454:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="webbrowser-app//oxide_helper" pid=711 comm="apparmor_parser" [ 4.529758] audit: type=1400 audit(1501363667.454:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=712 comm="apparmor_parser" [ 4.755886] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready [ 4.758394] iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled [ 4.758978] iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled [ 4.842775] Bluetooth: hci0: Waiting for firmware download to complete [ 4.842916] Bluetooth: hci0: Firmware loaded in 1601912 usecs [ 4.842964] Bluetooth: hci0: Waiting for device to boot [ 4.853975] Bluetooth: hci0: Device booted in 10740 usecs [ 4.854259] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-11-5.ddc [ 4.858018] Bluetooth: hci0: Applying Intel DDC parameters completed [ 4.889585] iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled [ 4.890537] iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled [ 4.921976] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 4.921978] Bluetooth: BNEP filters: protocol multicast [ 4.921981] Bluetooth: BNEP socket layer initialized [ 4.962762] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready [ 4.966516] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [ 5.153363] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [ 5.237024] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready [ 6.049516] Bluetooth: RFCOMM TTY layer initialized [ 6.049520] Bluetooth: RFCOMM socket layer initialized [ 6.049524] Bluetooth: RFCOMM ver 1.11 [ 8.693125] wlp1s0: authenticate with 60:e3:27:27:ed:24 [ 8.703703] wlp1s0: send auth to 60:e3:27:27:ed:24 (try 1/3) [ 8.709812] wlp1s0: authenticated [ 8.717354] wlp1s0: associate with 60:e3:27:27:ed:24 (try 1/3) [ 8.721648] wlp1s0: RX AssocResp from 60:e3:27:27:ed:24 (capab=0x411 status=0 aid=3) [ 8.724899] wlp1s0: associated [ 8.724949] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready [ 553.864332] wlp1s0: AP 60:e3:27:27:ed:24 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
Offline
#4 2017-07-30 10:03:00
urbinek - 
Dzban Naczelny
#5 2017-07-30 10:22:25
Jacekalex - Podobno człowiek...;)
- Jacekalex
- Podobno człowiek...;)
- Skąd: /dev/random
- Zarejestrowany: 2008-01-07
Re: Czytnik kart pamięci nie widzi karty microSD.
Da się odłączyć ten czytnik od kompa?
Jeżeli tak, to zrób tak:
Odłącz czytnik:
Potem w terminalu:
Kod:
su # wchodzisz na roota udevadm monitor
następnie podłączasz czytnik i wkładasz do niego problematyczna kartę.
Wszystko, co udevadm wypluł na terminal/konsolę, wklejasz tutaj w znacznikach CODE.
Pozdro
W demokracji każdy naród ma taką władzę, na jaką zasługuje ;)
Si vis pacem para bellum ;) | Pozdrawiam :)
Offline
#6 2017-07-30 12:38:04
dominika - Użytkownik
- dominika
- Użytkownik
- Zarejestrowany: 2017-07-29
Re: Czytnik kart pamięci nie widzi karty microSD.
Niestety czy też stety jest to czytnik kart wbudowany w ten model laptopów.
Offline
#7 2017-07-30 12:39:16
dominika - Użytkownik
- dominika
- Użytkownik
- Zarejestrowany: 2017-07-29
Re: Czytnik kart pamięci nie widzi karty microSD.
urbinek napisał(-a):
Co to za czytnik?
Według systemu coś nie bardzo go widać :)
A można to jakoś konkretnie sprawdzić? Próbowałam znaleźć w specyfikacji laptopa, aczkolwiek jest tam wyłącznie informacja, że model jest po prostu wyposażony w taki czytnik pamięci jak i czytnik kart inteligentnych.
Offline
#8 2017-07-30 12:55:47
ciastek1981 - Użytkownik
- ciastek1981
- Użytkownik
- Zarejestrowany: 2016-06-19
Re: Czytnik kart pamięci nie widzi karty microSD.
W BIOSie nie ma żadnych opcji do czytnika kart?
Debian - there is no substitute!
Offline
#9 2017-07-30 13:31:27
arecki - Użytkownik
- arecki
- Użytkownik
- Skąd: 44 Bronson Lane Hensonville
- Zarejestrowany: 2016-03-03
Re: Czytnik kart pamięci nie widzi karty microSD.
Pokaż wynik
Kod:
lspci -nnk
Offline
#10 2017-07-30 13:34:43
dominika - Użytkownik
- dominika
- Użytkownik
- Zarejestrowany: 2017-07-29
Re: Czytnik kart pamięci nie widzi karty microSD.
wynik:
Kod:
dominika@dominika:~$ lspci -nnk
00:00.0 Host bridge [0600]: Intel Corporation Sky Lake Host Bridge/DRAM Registers [8086:1904] (rev 08)
Subsystem: Dell Skylake Host Bridge/DRAM Registers [1028:06dc]
Kernel driver in use: skl_uncore
00:02.0 VGA compatible controller [0300]: Intel Corporation Sky Lake Integrated Graphics [8086:1916] (rev 07)
DeviceName: Onboard IGD
Subsystem: Dell Skylake Integrated Graphics [1028:06dc]
Kernel driver in use: i915
Kernel modules: i915
00:04.0 Signal processing controller [1180]: Intel Corporation Skylake Processor Thermal Subsystem [8086:1903] (rev 08)
Subsystem: Dell Skylake Processor Thermal Subsystem [1028:06dc]
Kernel driver in use: proc_thermal
Kernel modules: processor_thermal_device
00:14.0 USB controller [0c03]: Intel Corporation Sunrise Point-LP USB 3.0 xHCI Controller [8086:9d2f] (rev 21)
Subsystem: Dell Sunrise Point-LP USB 3.0 xHCI Controller [1028:06dc]
Kernel driver in use: xhci_hcd
00:14.2 Signal processing controller [1180]: Intel Corporation Sunrise Point-LP Thermal subsystem [8086:9d31] (rev 21)
Subsystem: Dell Sunrise Point-LP Thermal subsystem [1028:06dc]
Kernel driver in use: intel_pch_thermal
Kernel modules: intel_pch_thermal
00:16.0 Communication controller [0780]: Intel Corporation Sunrise Point-LP CSME HECI [8086:9d3a] (rev 21)
Subsystem: Dell Sunrise Point-LP CSME HECI [1028:06dc]
Kernel driver in use: mei_me
Kernel modules: mei_me
00:16.3 Serial controller [0700]: Intel Corporation Device [8086:9d3d] (rev 21)
Subsystem: Dell Device [1028:06dc]
Kernel driver in use: serial
00:17.0 RAID bus controller [0104]: Intel Corporation 82801 Mobile SATA Controller [RAID mode] [8086:282a] (rev 21)
Subsystem: Dell 82801 Mobile SATA Controller [RAID mode] [1028:06dc]
Kernel driver in use: ahci
Kernel modules: ahci
00:1c.0 PCI bridge [0604]: Intel Corporation Sunrise Point-LP PCI Express Root Port [8086:9d14] (rev f1)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1d.0 PCI bridge [0604]: Intel Corporation Device [8086:9d1a] (rev f1)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1f.0 ISA bridge [0601]: Intel Corporation Sunrise Point-LP LPC Controller [8086:9d48] (rev 21)
Subsystem: Dell Sunrise Point-LP LPC Controller [1028:06dc]
00:1f.2 Memory controller [0580]: Intel Corporation Sunrise Point-LP PMC [8086:9d21] (rev 21)
Subsystem: Dell Sunrise Point-LP PMC [1028:06dc]
Kernel driver in use: intel_pmc_core
00:1f.3 Audio device [0403]: Intel Corporation Sunrise Point-LP HD Audio [8086:9d70] (rev 21)
Subsystem: Dell Sunrise Point-LP HD Audio [1028:06dc]
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel, snd_soc_skl
00:1f.4 SMBus [0c05]: Intel Corporation Sunrise Point-LP SMBus [8086:9d23] (rev 21)
Subsystem: Dell Sunrise Point-LP SMBus [1028:06dc]
Kernel modules: i2c_i801
00:1f.6 Ethernet controller [0200]: Intel Corporation Ethernet Connection I219-LM [8086:156f] (rev 21)
Subsystem: Dell Ethernet Connection I219-LM [1028:06dc]
Kernel driver in use: e1000e
Kernel modules: e1000e
01:00.0 Network controller [0280]: Intel Corporation Wireless 8260 [8086:24f3] (rev 3a)
Subsystem: Intel Corporation Wireless 8260 [8086:0050]
Kernel driver in use: iwlwifi
Kernel modules: iwlwifi
02:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS525A PCI Express Card Reader [10ec:525a] (rev 01)
Subsystem: Dell RTS525A PCI Express Card Reader [1028:06dc]
Kernel driver in use: rtsx_pci
Kernel modules: rtsx_pciOffline
#11 2017-07-30 13:37:17
dominika - Użytkownik
- dominika
- Użytkownik
- Zarejestrowany: 2017-07-29
Re: Czytnik kart pamięci nie widzi karty microSD.
przepraszam, poprzedni był bez karty.
poniżej wynik z włożoną kartą:
Kod:
dominika@dominika:~$ lspci -nnk
00:00.0 Host bridge [0600]: Intel Corporation Sky Lake Host Bridge/DRAM Registers [8086:1904] (rev 08)
Subsystem: Dell Skylake Host Bridge/DRAM Registers [1028:06dc]
Kernel driver in use: skl_uncore
00:02.0 VGA compatible controller [0300]: Intel Corporation Sky Lake Integrated Graphics [8086:1916] (rev 07)
DeviceName: Onboard IGD
Subsystem: Dell Skylake Integrated Graphics [1028:06dc]
Kernel driver in use: i915
Kernel modules: i915
00:04.0 Signal processing controller [1180]: Intel Corporation Skylake Processor Thermal Subsystem [8086:1903] (rev 08)
Subsystem: Dell Skylake Processor Thermal Subsystem [1028:06dc]
Kernel driver in use: proc_thermal
Kernel modules: processor_thermal_device
00:14.0 USB controller [0c03]: Intel Corporation Sunrise Point-LP USB 3.0 xHCI Controller [8086:9d2f] (rev 21)
Subsystem: Dell Sunrise Point-LP USB 3.0 xHCI Controller [1028:06dc]
Kernel driver in use: xhci_hcd
00:14.2 Signal processing controller [1180]: Intel Corporation Sunrise Point-LP Thermal subsystem [8086:9d31] (rev 21)
Subsystem: Dell Sunrise Point-LP Thermal subsystem [1028:06dc]
Kernel driver in use: intel_pch_thermal
Kernel modules: intel_pch_thermal
00:16.0 Communication controller [0780]: Intel Corporation Sunrise Point-LP CSME HECI [8086:9d3a] (rev 21)
Subsystem: Dell Sunrise Point-LP CSME HECI [1028:06dc]
Kernel driver in use: mei_me
Kernel modules: mei_me
00:16.3 Serial controller [0700]: Intel Corporation Device [8086:9d3d] (rev 21)
Subsystem: Dell Device [1028:06dc]
Kernel driver in use: serial
00:17.0 RAID bus controller [0104]: Intel Corporation 82801 Mobile SATA Controller [RAID mode] [8086:282a] (rev 21)
Subsystem: Dell 82801 Mobile SATA Controller [RAID mode] [1028:06dc]
Kernel driver in use: ahci
Kernel modules: ahci
00:1c.0 PCI bridge [0604]: Intel Corporation Sunrise Point-LP PCI Express Root Port [8086:9d14] (rev f1)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1d.0 PCI bridge [0604]: Intel Corporation Device [8086:9d1a] (rev f1)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1f.0 ISA bridge [0601]: Intel Corporation Sunrise Point-LP LPC Controller [8086:9d48] (rev 21)
Subsystem: Dell Sunrise Point-LP LPC Controller [1028:06dc]
00:1f.2 Memory controller [0580]: Intel Corporation Sunrise Point-LP PMC [8086:9d21] (rev 21)
Subsystem: Dell Sunrise Point-LP PMC [1028:06dc]
Kernel driver in use: intel_pmc_core
00:1f.3 Audio device [0403]: Intel Corporation Sunrise Point-LP HD Audio [8086:9d70] (rev 21)
Subsystem: Dell Sunrise Point-LP HD Audio [1028:06dc]
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel, snd_soc_skl
00:1f.4 SMBus [0c05]: Intel Corporation Sunrise Point-LP SMBus [8086:9d23] (rev 21)
Subsystem: Dell Sunrise Point-LP SMBus [1028:06dc]
Kernel modules: i2c_i801
00:1f.6 Ethernet controller [0200]: Intel Corporation Ethernet Connection I219-LM [8086:156f] (rev 21)
Subsystem: Dell Ethernet Connection I219-LM [1028:06dc]
Kernel driver in use: e1000e
Kernel modules: e1000e
01:00.0 Network controller [0280]: Intel Corporation Wireless 8260 [8086:24f3] (rev 3a)
Subsystem: Intel Corporation Wireless 8260 [8086:0050]
Kernel driver in use: iwlwifi
Kernel modules: iwlwifi
02:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS525A PCI Express Card Reader [10ec:525a] (rev 01)
Subsystem: Dell RTS525A PCI Express Card Reader [1028:06dc]
Kernel driver in use: rtsx_pci
Kernel modules: rtsx_pciOffline
#12 2017-07-30 14:08:01
hi - Zbanowany
- hi
- Zbanowany
- Zarejestrowany: 2016-03-24
Re: Czytnik kart pamięci nie widzi karty microSD.
Kod:
lsmod | grep rtsx_pci
"Są drogi, którymi nie należy podążać, armie, których nie należy atakować, fortece, których nie należy oblegać, terytoria, o które nie należy walczyć, zarządzenia, których nie należy wykonywać" Sun Tzu
Offline
#13 2017-07-30 14:12:36
arecki - Użytkownik
- arecki
- Użytkownik
- Skąd: 44 Bronson Lane Hensonville
- Zarejestrowany: 2016-03-03
Re: Czytnik kart pamięci nie widzi karty microSD.
To jest Twój czytnik:
02:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS525A PCI Express Card Reader [10ec:525a] (rev 01)
Subsystem: Dell RTS525A PCI Express Card Reader [1028:06dc]
Kernel driver in use: rtsx_pci
Kernel modules: rtsx_pci
Czytnik jest sprawny, czyta pod Windows?
Offline
#14 2017-07-30 14:15:44
dominika - Użytkownik
- dominika
- Użytkownik
- Zarejestrowany: 2017-07-29
Re: Czytnik kart pamięci nie widzi karty microSD.
Kod:
dominika@dominika:~$ lsmod | grep rtsx_pci rtsx_pci_ms 20480 0 memstick 16384 1 rtsx_pci_ms rtsx_pci_sdmmc 24576 0 rtsx_pci 57344 2 rtsx_pci_sdmmc,rtsx_pci_ms
Nie wiem czy czytanie pod Windowsem świadczy o sprawności czytnika, ale odpowiadając na pytanie, niestety nie - na Windowsie również nie czyta kart. Pierwszy raz używam tego czytnika, z racji tego że laptop jest nowy.
Offline
#15 2017-07-30 14:27:50
arecki - Użytkownik
- arecki
- Użytkownik
- Skąd: 44 Bronson Lane Hensonville
- Zarejestrowany: 2016-03-03
Re: Czytnik kart pamięci nie widzi karty microSD.
Byś może czytnik jest uszkodzony.
Trzeba to potwierdzić na Windows, sprawdzić w menadżerze urządzeń czy jest poprawnie wykrywany.
Może sam czytnik ma jakiś wyłącznik?
Ostatnio edytowany przez arecki (2017-07-30 14:49:00)
Offline
#16 2017-07-30 16:35:48
hi - Zbanowany
- hi
- Zbanowany
- Zarejestrowany: 2016-03-24
Re: Czytnik kart pamięci nie widzi karty microSD.
może na rts_bpp pójdzie? (co prawda inny czip ale może da radę)
https://wiki.debian.org/Realtek%20Barossa%20plus
https://abhinavgupta2812.wordpress.com/2014/01/28/g … ed-on-debian/
Ostatnio edytowany przez hi (2017-07-30 16:38:20)
"Są drogi, którymi nie należy podążać, armie, których nie należy atakować, fortece, których nie należy oblegać, terytoria, o które nie należy walczyć, zarządzenia, których nie należy wykonywać" Sun Tzu
Offline
#17 2017-07-30 19:04:00
wxn - Użytkownik
- wxn
- Użytkownik
- Zarejestrowany: 2015-04-29
Re: Czytnik kart pamięci nie widzi karty microSD.
Może w BIOSie jest wyłączony ten czytnik. W moim lapku ASUS , w BIOSie domyślnie mam tak ustawione: Security -> I/O Interface Security -> USB Interface Security :
USB Interface [UNLOCKED]
External Ports [UNLOCKED]
CMOS Camera [LOCKED]
Card Reader [UNLOCKED]
W Debianie 9 na takich ustawieniach jest
Kod:
:~$ sudo su # lspci 00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h Processor Root Complex 00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] BeaverCreek [Radeon HD 6520G] 00:01.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] BeaverCreek HDMI Audio [Radeon HD 6500D and 6400G-6600G series] 00:02.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 12h Processor Root Port 00:10.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller (rev 03) 00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] (rev 40) 00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11) 00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11) 00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller (rev 13) 00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD] FCH Azalia Controller (rev 01) 00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge (rev 11) 00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD] FCH PCI Bridge (rev 40) 00:14.7 SD Host controller: Advanced Micro Devices, Inc. [AMD] FCH SD Flash Controller 00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 0 (rev 43) 00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 1 00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 2 00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 3 00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 4 00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 6 00:18.6 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 5 00:18.7 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 7 01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Thames [Radeon HD 7500M/7600M Series] # lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 002: ID 1c4f:0034 SiGma Micro Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Po włożeniu microSD z adapterem do czytnika jest:
Kod:
# udevadm monitor monitor will print the received events for: UDEV - the event which udev sends out after rule processing KERNEL - the kernel uevent KERNEL[403.002050] add /devices/pci0000:00/0000:00:12.2/usb1/1-5 (usb) KERNEL[403.008448] add /devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5:1.0 (usb) UDEV [403.056777] add /devices/pci0000:00/0000:00:12.2/usb1/1-5 (usb) KERNEL[403.117104] add /module/usb_storage (module) KERNEL[403.117190] add /bus/usb/drivers/usb-storage (drivers) UDEV [403.119447] add /module/usb_storage (module) UDEV [403.120634] add /bus/usb/drivers/usb-storage (drivers) KERNEL[403.142953] add /module/uas (module) KERNEL[403.143043] add /bus/usb/drivers/uas (drivers) UDEV [403.144361] add /module/uas (module) UDEV [403.146271] add /bus/usb/drivers/uas (drivers) KERNEL[403.177648] add /module/ums_realtek (module) UDEV [403.179115] add /module/ums_realtek (module) KERNEL[403.193541] add /devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5:1.0/host3 (scsi) KERNEL[403.193621] add /devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5:1.0/host3/scsi_host/host3 (scsi_host) KERNEL[403.193656] add /bus/usb/drivers/ums-realtek (drivers) UDEV [403.193787] add /devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5:1.0 (usb) UDEV [403.195295] add /bus/usb/drivers/ums-realtek (drivers) UDEV [403.195816] add /devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5:1.0/host3 (scsi) UDEV [403.197715] add /devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5:1.0/host3/scsi_host/host3 (scsi_host) KERNEL[404.225771] add /devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5:1.0/host3/target3:0:0 (scsi) KERNEL[404.225864] add /devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5:1.0/host3/target3:0:0/3:0:0:0 (scsi) KERNEL[404.225897] add /devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5:1.0/host3/target3:0:0/3:0:0:0/scsi_disk/3:0:0:0 (scsi_disk) KERNEL[404.225927] add /devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5:1.0/host3/target3:0:0/3:0:0:0/scsi_device/3:0:0:0 (scsi_device) KERNEL[404.226386] add /devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5:1.0/host3/target3:0:0/3:0:0:0/scsi_generic/sg2 (scsi_generic) KERNEL[404.226673] add /devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5:1.0/host3/target3:0:0/3:0:0:0/bsg/3:0:0:0 (bsg) UDEV [404.229792] add /devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5:1.0/host3/target3:0:0 (scsi) UDEV [404.232670] add /devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5:1.0/host3/target3:0:0/3:0:0:0 (scsi) UDEV [404.235832] add /devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5:1.0/host3/target3:0:0/3:0:0:0/scsi_disk/3:0:0:0 (scsi_disk) UDEV [404.237862] add /devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5:1.0/host3/target3:0:0/3:0:0:0/scsi_device/3:0:0:0 (scsi_device) UDEV [404.238651] add /devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5:1.0/host3/target3:0:0/3:0:0:0/bsg/3:0:0:0 (bsg) UDEV [404.238995] add /devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5:1.0/host3/target3:0:0/3:0:0:0/scsi_generic/sg2 (scsi_generic) KERNEL[404.994437] add /devices/virtual/bdi/8:16 (bdi) UDEV [404.996965] add /devices/virtual/bdi/8:16 (bdi) KERNEL[405.003395] add /devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5:1.0/host3/target3:0:0/3:0:0:0/block/sdb (block) KERNEL[405.003503] add /devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5:1.0/host3/target3:0:0/3:0:0:0/block/sdb/sdb1 (block) UDEV [405.124360] add /devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5:1.0/host3/target3:0:0/3:0:0:0/block/sdb (block) UDEV [405.228171] add /devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5:1.0/host3/target3:0:0/3:0:0:0/block/sdb/sdb1 (block)
i w Thunarze pojawia się ikonka woluminu o rozmiarze 16 GB.
Gdy w BIOSie zmienię
Card Reader [LOCKED]
to w Debianie też jest ten czytnik
Kod:
00:14.7 SD Host controller: Advanced Micro Devices, Inc. [AMD] FCH SD Flash Controller
ale po włożeniu microSD z adapterem do czytnika brak jest reakcji
Kod:
# udevadm monitor monitor will print the received events for: UDEV - the event which udev sends out after rule processing KERNEL - the kernel uevent
Offline
#18 2017-07-30 20:15:21
dominika - Użytkownik
- dominika
- Użytkownik
- Zarejestrowany: 2017-07-29
Re: Czytnik kart pamięci nie widzi karty microSD.
arecki - czytnik sam w sobie nie ma włącznika/wyłącznika, natomiast czy na Windowosie jest widoczny zaraz się przełączę i sprawdzę.
hi - bardzo dużo czynności do wykonania, których nie rozumiem dlatego nie zajmowałam się tym wcześniej. Obecnie mam czas, więc doczytam i wypróbuję.
wxn - weszłam do BIOSu, u mnie w Settings/System Configuration/Miscellaneous Devices są zaznaczone 2 opcje:
1) Enable camera
2) Enable Secure Digital (SD) Card //więc to chyba dobrze?
i odznaczona jest jedna:
1) Secure Digital (SD) Card Read-Only Mode //co chyba też jest poprawne
Offline
#19 2017-07-30 20:28:38
hi - Zbanowany
- hi
- Zbanowany
- Zarejestrowany: 2016-03-24
Re: Czytnik kart pamięci nie widzi karty microSD.
dominika napisał(-a):
hi - bardzo dużo czynności do wykonania, których nie rozumiem dlatego nie zajmowałam się tym wcześniej. Obecnie mam czas, więc doczytam i wypróbuję.
kwestia skompilowania modułu i włączenia go brzmi groźnie ale to nic trudnego :) pisz pytaj jak czegoś nie wiesz pomożemy
Ostatnio edytowany przez hi (2017-07-30 20:28:59)
"Są drogi, którymi nie należy podążać, armie, których nie należy atakować, fortece, których nie należy oblegać, terytoria, o które nie należy walczyć, zarządzenia, których nie należy wykonywać" Sun Tzu
Offline
#20 2017-07-30 21:09:25
dominika - Użytkownik
- dominika
- Użytkownik
- Zarejestrowany: 2017-07-29
Re: Czytnik kart pamięci nie widzi karty microSD.
arecki, a więc na Windowsie:
rezultaty z diskmgmt.msc i diskpart (list disk):
Kod:
Microsoft DiskPart version 10.0.14393.0 Copyright (C) 1999-2013 Microsoft Corporation. On computer: WINDOWS-JVS80QS DISKPART> list disk Disk ### Status Size Free Dyn Gpt -------- ------------- ------- ------- --- --- Disk 0 Online 238 GB 0 B *
(....) chciałabym załączyć odpowiednie screeny, jakaś podpowiedź gdzie można to zrobić podczas udzielania odpowiedzi w poście? Nie widzę tej funkcji :( Czy jedynym rozwiązaniem jest wstawienie zdjęć na jakiś portal i podanie url do nich?
Offline
#21 2017-07-30 21:25:17
arecki - Użytkownik
- arecki
- Użytkownik
- Skąd: 44 Bronson Lane Hensonville
- Zarejestrowany: 2016-03-03
Re: Czytnik kart pamięci nie widzi karty microSD.
Zrzuty możesz wykonywać na przykładowy postimg.
Offline
#22 2017-07-30 21:54:45
dominika - Użytkownik
- dominika
- Użytkownik
- Zarejestrowany: 2017-07-29
Re: Czytnik kart pamięci nie widzi karty microSD.
Okej, dziękuję a więc (od razu przepraszam za rozmiar...):
- menedżer urządzeń z rozwiniętymi niektórymi rzeczami, jeśli jeszcze jakieś byłyby istotne to poproszę o informację
- diskmgmt
Offline
#23 2017-07-30 22:01:06
arecki - Użytkownik
- arecki
- Użytkownik
- Skąd: 44 Bronson Lane Hensonville
- Zarejestrowany: 2016-03-03
Re: Czytnik kart pamięci nie widzi karty microSD.
Niby widzi ten czytnik, ale czy wykrywa karty włożone do niego?
Spróbuj z taką kartą co do której masz pewność, że jest sprawna (sprawdzona na innym czytniku).
Ostatnio edytowany przez arecki (2017-07-30 22:03:56)
Offline
#24 2017-07-30 22:04:34
dominika - Użytkownik
- dominika
- Użytkownik
- Zarejestrowany: 2017-07-29
Re: Czytnik kart pamięci nie widzi karty microSD.
arecki - raczej nie skoro nigdzie nie mam widocznego miejsca o rozmiarze 2GB.
hi - mam problem, przy kroku 4 z pierwszego odnośnika, w momencie instrukcji "make" dostaję wylistowaną serię błędów (składniowych? jakby czegoś nie mógł znaleźć).
Kod:
dominika@dominika:~/Programy/Realtek_SD/rts_bpp$ make
cp -f ./define.release ./define.h
make -C /lib/modules/4.10.0-27-generic/build/ SUBDIRS=/home/dominika/Programy/Realtek_SD/rts_bpp modules
make[1]: Wejście do katalogu '/usr/src/linux-headers-4.10.0-27-generic'
CC [M] /home/dominika/Programy/Realtek_SD/rts_bpp/rtsx.o
/home/dominika/Programy/Realtek_SD/rts_bpp/rtsx.c: In function ‘proc_info’:
/home/dominika/Programy/Realtek_SD/rts_bpp/rtsx.c:141:41: error: macro "__TIME__" might prevent reproducible builds [-Werror=date-time]
SPRINTF(" Build: %s\n", __TIME__);
^
/home/dominika/Programy/Realtek_SD/rts_bpp/rtsx.c: At top level:
/home/dominika/Programy/Realtek_SD/rts_bpp/rtsx.c:259:2: error: unknown field ‘proc_info’ specified in initializer
.proc_info = proc_info,
^
/home/dominika/Programy/Realtek_SD/rts_bpp/rtsx.c:259:17: error: initialization from incompatible pointer type [-Werror=incompatible-pointer-types]
.proc_info = proc_info,
^
/home/dominika/Programy/Realtek_SD/rts_bpp/rtsx.c:259:17: note: (near initialization for ‘rtsx_host_template.proc_dir’)
In file included from ./include/linux/printk.h:6:0,
from ./include/linux/kernel.h:13,
from ./include/linux/sched.h:17,
from ./include/linux/blkdev.h:4,
from /home/dominika/Programy/Realtek_SD/rts_bpp/rtsx.c:23:
/home/dominika/Programy/Realtek_SD/rts_bpp/rtsx.c: In function ‘rtsx_control_thread’:
./include/linux/kern_levels.h:4:18: warning: format ‘%d’ expects argument of type ‘int’, but argument 3 has type ‘u64 {aka long long unsigned int}’ [-Wformat=]
#define KERN_SOH "\001" /* ASCII Start Of Header */
^
./include/linux/kern_levels.h:10:18: note: in expansion of macro ‘KERN_SOH’
#define KERN_ERR KERN_SOH "3" /* error conditions */
^
/home/dominika/Programy/Realtek_SD/rts_bpp/rtsx.c:495:11: note: in expansion of macro ‘KERN_ERR’
printk(KERN_ERR "Bad target number (%d:%d)\n",
^
./include/linux/kern_levels.h:4:18: warning: format ‘%d’ expects argument of type ‘int’, but argument 3 has type ‘u64 {aka long long unsigned int}’ [-Wformat=]
#define KERN_SOH "\001" /* ASCII Start Of Header */
^
./include/linux/kern_levels.h:10:18: note: in expansion of macro ‘KERN_SOH’
#define KERN_ERR KERN_SOH "3" /* error conditions */
^
/home/dominika/Programy/Realtek_SD/rts_bpp/rtsx.c:501:11: note: in expansion of macro ‘KERN_ERR’
printk(KERN_ERR "Bad LUN (%d:%d)\n",
^
/home/dominika/Programy/Realtek_SD/rts_bpp/rtsx.c: At top level:
/home/dominika/Programy/Realtek_SD/rts_bpp/rtsx.c:893:22: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘rtsx_probe’
static int __devinit rtsx_probe(struct pci_dev *pci, const struct pci_device_id
^
/home/dominika/Programy/Realtek_SD/rts_bpp/rtsx.c:900:35: error: macro "__TIME__" might prevent reproducible builds [-Werror=date-time]
printk(KERN_INFO "--- %s ---\n", __TIME__);
^
/home/dominika/Programy/Realtek_SD/rts_bpp/rtsx.c:1048:23: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘rtsx_remove’
static void __devexit rtsx_remove(struct pci_dev *pci)
^
/home/dominika/Programy/Realtek_SD/rts_bpp/rtsx.c:1073:11: error: ‘rtsx_probe’ undeclared here (not in a function)
.probe = rtsx_probe,
^
/home/dominika/Programy/Realtek_SD/rts_bpp/rtsx.c:1074:12: error: implicit declaration of function ‘__devexit_p’ [-Werror=implicit-function-declaration]
.remove = __devexit_p(rtsx_remove),
^
/home/dominika/Programy/Realtek_SD/rts_bpp/rtsx.c:1074:24: error: ‘rtsx_remove’ undeclared here (not in a function)
.remove = __devexit_p(rtsx_remove),
^
/home/dominika/Programy/Realtek_SD/rts_bpp/rtsx.c:255:34: warning: ‘rtsx_host_template’ defined but not used [-Wunused-variable]
static struct scsi_host_template rtsx_host_template = {
^
/home/dominika/Programy/Realtek_SD/rts_bpp/rtsx.c:450:12: warning: ‘rtsx_control_thread’ defined but not used [-Wunused-function]
static int rtsx_control_thread(void * __dev)
^
/home/dominika/Programy/Realtek_SD/rts_bpp/rtsx.c:559:12: warning: ‘rtsx_polling_thread’ defined but not used [-Wunused-function]
static int rtsx_polling_thread(void * __dev)
^
/home/dominika/Programy/Realtek_SD/rts_bpp/rtsx.c:715:13: warning: ‘quiesce_and_remove_host’ defined but not used [-Wunused-function]
static void quiesce_and_remove_host(struct rtsx_dev *dev)
^
/home/dominika/Programy/Realtek_SD/rts_bpp/rtsx.c:751:13: warning: ‘release_everything’ defined but not used [-Wunused-function]
static void release_everything(struct rtsx_dev *dev)
^
/home/dominika/Programy/Realtek_SD/rts_bpp/rtsx.c:761:12: warning: ‘rtsx_scan_thread’ defined but not used [-Wunused-function]
static int rtsx_scan_thread(void * __dev)
^
/home/dominika/Programy/Realtek_SD/rts_bpp/rtsx.c:786:13: warning: ‘rtsx_init_options’ defined but not used [-Wunused-function]
static void rtsx_init_options(struct rtsx_chip *chip)
^
cc1: some warnings being treated as errors
scripts/Makefile.build:294: polecenia dla obiektu '/home/dominika/Programy/Realtek_SD/rts_bpp/rtsx.o' nie powiodły się
make[2]: *** [/home/dominika/Programy/Realtek_SD/rts_bpp/rtsx.o] Błąd 1
Makefile:1524: polecenia dla obiektu '_module_/home/dominika/Programy/Realtek_SD/rts_bpp' nie powiodły się
make[1]: *** [_module_/home/dominika/Programy/Realtek_SD/rts_bpp] Błąd 2
make[1]: Opuszczenie katalogu '/usr/src/linux-headers-4.10.0-27-generic'
Makefile:35: polecenia dla obiektu 'default' nie powiodły się
make: *** [default] Błąd 2Offline