Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!

Ogłoszenie

Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.

#26  2017-06-01 19:14:19

  milik - Użytkownik

milik
Użytkownik
Zarejestrowany: 2008-11-11

Re: Zacinanie openshot-qt

Cuda zainstalowany. Niestety wypluło coś takiego:

Kod:

root@irin:/home/milik# optirun glxinfo | grep OpenGL
[77963.884970] [ERROR]No bridge found. Try installing primus or virtualgl.
root@irin:/home/milik# dpkg -l | grep nvidia-cuda-toolkit
ii  nvidia-cuda-toolkit                       8.0.44-3                               amd64        NVIDIA CUDA development toolkit
root@irin:/home/milik# cd Pobrane/
root@irin:/home/milik/Pobrane# cd ..
root@irin:/home/milik# cd Obrazy/
root@irin:/home/milik/Obrazy# optirun ffmpeg -i test4K.mp4 -vcodec nvenc test_gpu.mkv -loglevel debug
[78105.086317] [ERROR]No bridge found. Try installing primus or virtualgl.
root@irin:/home/milik/Obrazy# LD_LIBRARY_PATH=/usr/lib/nvidia:/usr/lib/nvidia-cuda-toolkit:$LD_LIBRARY_PATH optirun ffmpeg -i test4K.mp4 -vcodec nvenc test_gpu.mkv
[78118.239964] [ERROR]No bridge found. Try installing primus or virtualgl.
root@irin:/home/milik/Obrazy#

Offline

 

#27  2017-06-01 19:42:51

  jawojx - Użytkownik

jawojx
Użytkownik
Zarejestrowany: 2012-10-11

Re: Zacinanie openshot-qt

Co pokazuje:

Kod:

echo linux-headers-$(uname -r)

i

Kod:

dpkg -l | linux-headers

Zainstalowane:

Kod:

apt-get install bumblebee-nvidia primus

Sterowniki prawidłowe są:

Kod:

dpkg -l | grep nvidia

Nic nie ma w /etc/X11/xorg.conf.d/

Ostatnio edytowany przez jawojx (2017-06-01 19:46:28)

Offline

 

#28  2017-06-01 19:52:47

  milik - Użytkownik

milik
Użytkownik
Zarejestrowany: 2008-11-11

Re: Zacinanie openshot-qt

Kod:

root@irin:/home/milik# echo linux-headers-$(uname -r)
linux-headers-4.9.0-3-amd64
root@irin:/home/milik# dpkg -l | linux-headers
bash: linux-headers: nie znaleziono polecenia
root@irin:/home/milik#

Zainstalowałem:

Kod:

apt-get install bumblebee-nvidia primus

Serowniki:

Kod:

root@irin:/home/milik# dpkg -l | grep nvidia
ii  bumblebee-nvidia                          3.2.1-14                               amd64        NVIDIA Optimus support using the proprietary NVIDIA driver
ii  glx-alternative-nvidia                    0.7.4                                  amd64        allows the selection of NVIDIA as GLX provider
ii  libegl-nvidia0:amd64                      375.66-1                               amd64        NVIDIA binary EGL library
ii  libegl-nvidia0:i386                       375.66-1                               i386         NVIDIA binary EGL library
ii  libegl1-glvnd-nvidia:amd64                375.66-1                               amd64        Vendor neutral GL dispatch library -- libEGL
ii  libegl1-glvnd-nvidia:i386                 375.66-1                               i386         Vendor neutral GL dispatch library -- libEGL
ii  libgl1-glvnd-nvidia-glx:amd64             375.66-1                               amd64        Vendor neutral GL dispatch library -- libGL
ii  libgl1-glvnd-nvidia-glx:i386              375.66-1                               i386         Vendor neutral GL dispatch library -- libGL
ii  libgl1-nvidia-glvnd-glx:amd64             375.66-1                               amd64        NVIDIA binary OpenGL/GLX library (GLVND variant)
ii  libgl1-nvidia-glvnd-glx:i386              375.66-1                               i386         NVIDIA binary OpenGL/GLX library (GLVND variant)
ii  libgldispatch0-nvidia:amd64               375.66-1                               amd64        Vendor neutral GL dispatch library -- libGLdispatch
ii  libgldispatch0-nvidia:i386                375.66-1                               i386         Vendor neutral GL dispatch library -- libGLdispatch
ii  libgles-nvidia1:amd64                     375.66-1                               amd64        NVIDIA binary OpenGL|ES 1.x library
ii  libgles-nvidia1:i386                      375.66-1                               i386         NVIDIA binary OpenGL|ES 1.x library
ii  libgles-nvidia2:amd64                     375.66-1                               amd64        NVIDIA binary OpenGL|ES 2.x library
ii  libgles-nvidia2:i386                      375.66-1                               i386         NVIDIA binary OpenGL|ES 2.x library
ii  libgles1-glvnd-nvidia:amd64               375.66-1                               amd64        NVIDIA binary OpenGL|ES 1.x GLVND stub library
ii  libgles1-glvnd-nvidia:i386                375.66-1                               i386         NVIDIA binary OpenGL|ES 1.x GLVND stub library
ii  libgles2-glvnd-nvidia:amd64               375.66-1                               amd64        NVIDIA binary OpenGL|ES 2.x GLVND stub library
ii  libgles2-glvnd-nvidia:i386                375.66-1                               i386         NVIDIA binary OpenGL|ES 2.x GLVND stub library
ii  libglx-nvidia0:amd64                      375.66-1                               amd64        NVIDIA binary GLX library
ii  libglx-nvidia0:i386                       375.66-1                               i386         NVIDIA binary GLX library
ii  libglx0-glvnd-nvidia:amd64                375.66-1                               amd64        Vendor neutral GL dispatch library -- libGLX
ii  libglx0-glvnd-nvidia:i386                 375.66-1                               i386         Vendor neutral GL dispatch library -- libGLX
ii  libnvidia-cfg1:amd64                      375.66-1                               amd64        NVIDIA binary OpenGL/GLX configuration library
ii  libnvidia-cfg1:i386                       375.66-1                               i386         NVIDIA binary OpenGL/GLX configuration library
ii  libnvidia-compiler:amd64                  375.66-1                               amd64        NVIDIA runtime compiler library
ii  libnvidia-eglcore:amd64                   375.66-1                               amd64        NVIDIA binary EGL core libraries
ii  libnvidia-eglcore:i386                    375.66-1                               i386         NVIDIA binary EGL core libraries
ii  libnvidia-fatbinaryloader:amd64           375.66-1                               amd64        NVIDIA FAT binary loader
ii  libnvidia-fatbinaryloader:i386            375.66-1                               i386         NVIDIA FAT binary loader
ii  libnvidia-glcore:amd64                    375.66-1                               amd64        NVIDIA binary OpenGL/GLX core libraries
ii  libnvidia-glcore:i386                     375.66-1                               i386         NVIDIA binary OpenGL/GLX core libraries
ii  libnvidia-ml1:amd64                       375.66-1                               amd64        NVIDIA Management Library (NVML) runtime library
ii  libnvidia-ptxjitcompiler:amd64            375.66-1                               amd64        NVIDIA PTX JIT Compiler
ii  libnvidia-ptxjitcompiler:i386             375.66-1                               i386         NVIDIA PTX JIT Compiler
ii  libopengl0-glvnd-nvidia:amd64             375.66-1                               amd64        Vendor neutral GL dispatch library -- libOpenGL
ii  libopengl0-glvnd-nvidia:i386              375.66-1                               i386         Vendor neutral GL dispatch library -- libOpenGL
ii  nvidia-alternative                        375.66-1                               amd64        allows the selection of NVIDIA as GLX provider
ii  nvidia-cuda-dev                           8.0.44-3                               amd64        NVIDIA CUDA development files
ii  nvidia-cuda-doc                           8.0.44-3                               all          NVIDIA CUDA and OpenCL documentation
ii  nvidia-cuda-gdb                           8.0.44-3                               amd64        NVIDIA CUDA Debugger (GDB)
ii  nvidia-cuda-toolkit                       8.0.44-3                               amd64        NVIDIA CUDA development toolkit
ii  nvidia-driver                             375.66-1                               amd64        NVIDIA metapackage
ii  nvidia-driver-bin                         375.66-1                               amd64        NVIDIA driver support binaries
ii  nvidia-driver-libs:amd64                  375.66-1                               amd64        NVIDIA metapackage (OpenGL/GLX/EGL/GLES libraries)
ii  nvidia-driver-libs:i386                   375.66-1                               i386         NVIDIA metapackage (OpenGL/GLX/EGL/GLES libraries)
ii  nvidia-driver-libs-i386:i386              375.66-1                               i386         NVIDIA metapackage (OpenGL/GLX/EGL/GLES 32-bit libraries)
ii  nvidia-egl-common                         375.66-1                               amd64        NVIDIA binary EGL driver - common files
ii  nvidia-egl-icd:amd64                      375.66-1                               amd64        NVIDIA EGL installable client driver (ICD)
ii  nvidia-egl-icd:i386                       375.66-1                               i386         NVIDIA EGL installable client driver (ICD)
pi  nvidia-installer-cleanup:i386             20151021+4                             i386         cleanup after driver installation with the nvidia-installer
ii  nvidia-kernel-common                      20151021+4                             amd64        NVIDIA binary kernel module support files
ii  nvidia-kernel-dkms                        375.66-1                               amd64        NVIDIA binary kernel module DKMS source
ii  nvidia-kernel-support                     375.66-1                               amd64        NVIDIA binary kernel module support files
ii  nvidia-legacy-check                       375.66-1                               amd64        check for NVIDIA GPUs requiring a legacy driver
ii  nvidia-modprobe                           375.26-1                               amd64        utility to load NVIDIA kernel modules and create device nodes
ii  nvidia-opencl-common                      375.66-1                               amd64        NVIDIA OpenCL driver - common files
ii  nvidia-opencl-dev:amd64                   8.0.44-3                               amd64        NVIDIA OpenCL development files
ii  nvidia-opencl-icd:amd64                   375.66-1                               amd64        NVIDIA OpenCL installable client driver (ICD)
ii  nvidia-persistenced                       375.26-2                               amd64        daemon to maintain persistent software state in the NVIDIA driver
ii  nvidia-profiler                           8.0.44-3                               amd64        NVIDIA Profiler for CUDA and OpenCL
ii  nvidia-settings                           375.26-3                               amd64        tool for configuring the NVIDIA graphics driver
ii  nvidia-smi                                375.66-1                               amd64        NVIDIA System Management Interface
ii  nvidia-support                            20151021+4                             amd64        NVIDIA binary graphics driver support files
ii  nvidia-vdpau-driver:amd64                 375.66-1                               amd64        Video Decode and Presentation API for Unix - NVIDIA driver
ii  nvidia-visual-profiler                    8.0.44-3                               amd64        NVIDIA Visual Profiler for CUDA and OpenCL
ii  nvidia-vulkan-common                      375.66-1                               amd64        NVIDIA Vulkan driver - common files
ii  nvidia-vulkan-icd:amd64                   375.66-1                               amd64        NVIDIA Vulkan installable client driver (ICD)
ii  nvidia-vulkan-icd:i386                    375.66-1                               i386         NVIDIA Vulkan installable client driver (ICD)
ii  xserver-xorg-video-nvidia                 375.66-1                               amd64        NVIDIA binary Xorg driver
root@irin:/home/milik#

Katalogu /etc/X11/xorg.conf.d/ nie mam. W /etc/X11/ jest tylko plik xorg.conf

Offline

 

#29  2017-06-01 20:09:51

  jawojx - Użytkownik

jawojx
Użytkownik
Zarejestrowany: 2012-10-11

Re: Zacinanie openshot-qt

Tam zapomniałem wpisać grep, teraz to mało istotne:

Kod:

dpkg -l | grep linux-headers

A przy tym co jest teraz pokazać:

Kod:

glxinfo | grep OpenGL

Jak tam jest nvidia to nic nie robić, jak jest intel to zrobić to.

Przenieś :

Kod:

mv /etc/X11/xorg.conf /etc/X11/xorg.conf_zapas

Uruchom komputer i sprawdź jeszcze raz to z 25.

Ostatnio edytowany przez jawojx (2017-06-01 20:14:02)

Offline

 

#30  2017-06-01 20:19:04

  milik - Użytkownik

milik
Użytkownik
Zarejestrowany: 2008-11-11

Re: Zacinanie openshot-qt

Kod:

root@irin:/home/milik# optirun glxinfo | grep OpenGL
[  238.618004] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) Screen 0 deleted because of no matching config section.

[  238.618044] [ERROR]Aborting because fallback start is disabled.
root@irin:/home/milik# dpkg -l | grep nvidia-cuda-toolkit
ii  nvidia-cuda-toolkit                       8.0.44-3                               amd64        NVIDIA CUDA development toolkit
root@irin:/home/milik# cd Obrazy/
root@irin:/home/milik/Obrazy# optirun ffmpeg -i test4K.mp4 -vcodec nvenc test_gpu.mkv -loglevel debug
[  269.791280] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) Screen 0 deleted because of no matching config section.

[  269.791316] [ERROR]Aborting because fallback start is disabled.
root@irin:/home/milik/Obrazy# LD_LIBRARY_PATH=/usr/lib/nvidia:/usr/lib/nvidia-cuda-toolkit:$LD_LIBRARY_PATH optirun ffmpeg -i test4K.mp4 -vcodec nvenc test_gpu.mkv
[  283.276790] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) Screen 0 deleted because of no matching config section.

[  283.276827] [ERROR]Aborting because fallback start is disabled.
root@irin:/home/milik/Obrazy#

Offline

 

#31  2017-06-01 20:35:49

  jawojx - Użytkownik

jawojx
Użytkownik
Zarejestrowany: 2012-10-11

Re: Zacinanie openshot-qt

A to:

Kod:

glxinfo | grep OpenGL

Co jest w:

Kod:

cat /var/log/Xorg.0.log

a jest:

Kod:

cat /var/log/Xorg.8.log

i

Kod:

cat /etc/bumblebee/xorg.conf.nvidia

Czy wycofałeś wszystkie zmiany jak chciałeś zrobić "ręczne" przełączanie np. w /etc/lightdm/lightdm.conf. Może tu cos zostało /etc/lightdm/display_setup.sh.

Ostatnio edytowany przez jawojx (2017-06-01 20:49:54)

Offline

 

#32  2017-06-01 20:56:07

  milik - Użytkownik

milik
Użytkownik
Zarejestrowany: 2008-11-11

Re: Zacinanie openshot-qt

Wszystkie zmiany zostały cofnięte, całe środowisko graficzne zostało zainstalowane na nowo.

Teraz wyniki:

Kod:

root@irin:/home/milik# glxinfo | grep OpenGL
OpenGL vendor string: Intel Open Source Technology Center
OpenGL renderer string: Mesa DRI Intel(R) HD Graphics 5500 (Broadwell GT2) 
OpenGL core profile version string: 4.5 (Core Profile) Mesa 13.0.6
OpenGL core profile shading language version string: 4.50
OpenGL core profile context flags: (none)
OpenGL core profile profile mask: core profile
OpenGL core profile extensions:
OpenGL version string: 3.0 Mesa 13.0.6
OpenGL shading language version string: 1.30
OpenGL context flags: (none)
OpenGL extensions:
OpenGL ES profile version string: OpenGL ES 3.1 Mesa 13.0.6
OpenGL ES profile shading language version string: OpenGL ES GLSL ES 3.10
OpenGL ES profile extensions:
root@irin:/home/milik#

Kod:

root@irin:/home/milik# cat /var/log/Xorg.0.log
[     3.418] 
X.Org X Server 1.19.2
Release Date: 2017-03-02
[     3.418] X Protocol Version 11, Revision 0
[     3.418] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[     3.418] Current Operating System: Linux irin 4.9.0-3-amd64 #1 SMP Debian 4.9.25-1 (2017-05-02) x86_64
[     3.418] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-3-amd64 root=UUID=58195624-edb9-4b1d-8bef-babc60edc831 ro pcie_port_pm=off quiet rcutree.rcu_idle_gp_delay=1
[     3.418] Build Date: 03 March 2017  03:14:41PM
[     3.418] xorg-server 2:1.19.2-1 (https://www.debian.org/support) 
[     3.418] Current version of pixman: 0.34.0
[     3.418]     Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[     3.418] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     3.418] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jun  1 20:13:35 2017
[     3.421] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     3.422] (==) No Layout section.  Using the first Screen section.
[     3.422] (==) No screen section available. Using defaults.
[     3.422] (**) |-->Screen "Default Screen Section" (0)
[     3.422] (**) |   |-->Monitor "<default monitor>"
[     3.423] (==) No device specified for screen "Default Screen Section".
    Using the first device section listed.
[     3.423] (**) |   |-->Device "GeForce 940M"
[     3.423] (**) |   |-->GPUDevice "intel"
[     3.423] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
[     3.423] (==) Automatically adding devices
[     3.423] (==) Automatically enabling devices
[     3.423] (==) Automatically adding GPU devices
[     3.423] (==) Max clients allowed: 256, resource mask: 0x1fffff
[     3.426] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[     3.426]     Entry deleted from font path.
[     3.431] (==) FontPath set to:
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/100dpi/:unscaled,
    /usr/share/fonts/X11/75dpi/:unscaled,
    /usr/share/fonts/X11/Type1,
    /usr/share/fonts/X11/100dpi,
    /usr/share/fonts/X11/75dpi,
    built-ins
[     3.431] (==) ModulePath set to "/usr/lib/xorg/modules"
[     3.431] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
[     3.431] (II) Loader magic: 0x5635e9849e00
[     3.431] (II) Module ABI versions:
[     3.431]     X.Org ANSI C Emulation: 0.4
[     3.431]     X.Org Video Driver: 23.0
[     3.431]     X.Org XInput driver : 24.1
[     3.431]     X.Org Server Extension : 10.0
[     3.432] (++) using VT number 7

[     3.432] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[     3.433] (II) xfree86: Adding drm device (/dev/dri/card0)
[     3.437] (--) PCI:*(0:0:2:0) 8086:1616:1025:098a rev 9, Mem @ 0xc2000000/16777216, 0xd0000000/268435456, I/O @ 0x00005000/64, BIOS @ 0x????????/131072
[     3.437] (II) "glx" will be loaded by default.
[     3.437] (II) LoadModule: "modesetting"
[     3.441] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[     3.442] (II) Module modesetting: vendor="X.Org Foundation"
[     3.442]     compiled for 1.19.2, module version = 1.19.2
[     3.442]     Module class: X.Org Video Driver
[     3.442]     ABI class: X.Org Video Driver, version 23.0
[     3.442] (II) LoadModule: "glx"
[     3.443] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[     3.454] (II) Module glx: vendor="X.Org Foundation"
[     3.454]     compiled for 1.19.2, module version = 1.0.0
[     3.454]     ABI class: X.Org Server Extension, version 10.0
[     3.454] (II) LoadModule: "modesetting"
[     3.454] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[     3.454] (II) Module modesetting: vendor="X.Org Foundation"
[     3.454]     compiled for 1.19.2, module version = 1.19.2
[     3.454]     Module class: X.Org Video Driver
[     3.454]     ABI class: X.Org Video Driver, version 23.0
[     3.454] (II) UnloadModule: "modesetting"
[     3.454] (II) Unloading modesetting
[     3.454] (II) Failed to load module "modesetting" (already loaded, 22069)
[     3.454] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[     3.486] (II) modeset(0): using drv /dev/dri/card0
[     3.486] (WW) Falling back to old probe method for modesetting
[     3.502] (II) modeset(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
[     3.502] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[     3.502] (==) modeset(0): RGB weight 888
[     3.502] (==) modeset(0): Default visual is TrueColor
[     3.502] (II) Loading sub module "glamoregl"
[     3.502] (II) LoadModule: "glamoregl"
[     3.502] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[     3.513] (II) Module glamoregl: vendor="X.Org Foundation"
[     3.513]     compiled for 1.19.2, module version = 1.0.0
[     3.513]     ABI class: X.Org ANSI C Emulation, version 0.4
[     3.513] (II) glamor: OpenGL accelerated X.org driver based.
[     3.544] (II) glamor: EGL version 1.4 (DRI2):
[     3.555] (II) modeset(0): glamor initialized
[     3.555] (II) modeset(0): Output eDP-1 has no monitor section
[     3.556] (II) modeset(0): Output HDMI-1 has no monitor section
[     3.556] (II) modeset(0): Output DP-1 has no monitor section
[     3.557] (II) modeset(0): EDID for output eDP-1
[     3.557] (II) modeset(0): Manufacturer: AUO  Model: 38ed  Serial#: 0
[     3.557] (II) modeset(0): Year: 2014  Week: 43
[     3.557] (II) modeset(0): EDID Version: 1.4
[     3.557] (II) modeset(0): Digital Display Input
[     3.557] (II) modeset(0): 6 bits per channel
[     3.557] (II) modeset(0): Digital interface is DisplayPort
[     3.557] (II) modeset(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[     3.557] (II) modeset(0): Gamma: 2.20
[     3.557] (II) modeset(0): No DPMS capabilities specified
[     3.557] (II) modeset(0): Supported color encodings: RGB 4:4:4 
[     3.557] (II) modeset(0): First detailed timing is preferred mode
[     3.557] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[     3.557] (II) modeset(0): redX: 0.580 redY: 0.335   greenX: 0.330 greenY: 0.565
[     3.557] (II) modeset(0): blueX: 0.155 blueY: 0.140   whiteX: 0.313 whiteY: 0.329
[     3.557] (II) modeset(0): Manufacturer's mask: 0
[     3.557] (II) modeset(0): Supported detailed timing:
[     3.557] (II) modeset(0): clock: 142.0 MHz   Image Size:  344 x 193 mm
[     3.557] (II) modeset(0): h_active: 1920  h_sync: 2028  h_sync_end 2076 h_blank_end 2100 h_border: 0
[     3.557] (II) modeset(0): v_active: 1080  v_sync: 1090  v_sync_end 1100 v_blanking: 1126 v_border: 0
[     3.557] (II) modeset(0): Unknown vendor-specific block f
[     3.557] (II) modeset(0):  AUO
[     3.557] (II) modeset(0):  B156HTN03.8
[     3.557] (II) modeset(0): EDID (in hex):
[     3.557] (II) modeset(0):     00ffffffffffff0006afed3800000000
[     3.557] (II) modeset(0):     2b1801049522137802bbf59455549027
[     3.557] (II) modeset(0):     23505400000001010101010101010101
[     3.557] (II) modeset(0):     010101010101783780b470382e406c30
[     3.557] (II) modeset(0):     aa0058c1100000180000000f00000000
[     3.557] (II) modeset(0):     00000000000000000020000000fe0041
[     3.557] (II) modeset(0):     554f0a202020202020202020000000fe
[     3.557] (II) modeset(0):     004231353648544e30332e38200a00b0
[     3.557] (II) modeset(0): Printing probed modes for output eDP-1
[     3.557] (II) modeset(0): Modeline "1920x1080"x60.1  142.00  1920 2028 2076 2100  1080 1090 1100 1126 -hsync -vsync (67.6 kHz eP)
[     3.557] (II) modeset(0): Modeline "1920x1080"x59.9  138.50  1920 1968 2000 2080  1080 1083 1088 1111 +hsync -vsync (66.6 kHz d)
[     3.557] (II) modeset(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz d)
[     3.557] (II) modeset(0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz d)
[     3.557] (II) modeset(0): Modeline "1600x1024"x60.2  103.12  1600 1600 1656 1664  1024 1024 1029 1030 +hsync +vsync (62.0 kHz d)
[     3.557] (II) modeset(0): Modeline "1400x1050"x60.0  122.00  1400 1488 1640 1880  1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[     3.557] (II) modeset(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[     3.557] (II) modeset(0): Modeline "1440x900"x59.9  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz d)
[     3.557] (II) modeset(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz d)
[     3.557] (II) modeset(0): Modeline "1360x768"x59.8   84.75  1360 1432 1568 1776  768 771 781 798 -hsync +vsync (47.7 kHz d)
[     3.557] (II) modeset(0): Modeline "1360x768"x60.0   72.00  1360 1408 1440 1520  768 771 781 790 +hsync -vsync (47.4 kHz d)
[     3.557] (II) modeset(0): Modeline "1152x864"x60.0   81.62  1152 1216 1336 1520  864 865 868 895 -hsync +vsync (53.7 kHz d)
[     3.557] (II) modeset(0): Modeline "1024x768"x120.1  133.47  1024 1100 1212 1400  768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[     3.557] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[     3.557] (II) modeset(0): Modeline "960x720"x120.0  117.00  960 1024 1128 1300  720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[     3.557] (II) modeset(0): Modeline "928x696"x120.1  109.15  928 976 1088 1264  696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[     3.557] (II) modeset(0): Modeline "896x672"x120.0  102.40  896 960 1060 1224  672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[     3.557] (II) modeset(0): Modeline "960x600"x120.0   77.00  960 984 1000 1040  600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[     3.557] (II) modeset(0): Modeline "960x540"x120.0   69.25  960 984 1000 1040  540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[     3.557] (II) modeset(0): Modeline "800x600"x120.0   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[     3.557] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[     3.557] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[     3.557] (II) modeset(0): Modeline "840x525"x120.0   73.12  840 892 980 1120  525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[     3.557] (II) modeset(0): Modeline "840x525"x119.8   59.50  840 864 880 920  525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[     3.557] (II) modeset(0): Modeline "800x512"x120.3   51.56  800 800 828 832  512 512 514 515 doublescan +hsync +vsync (62.0 kHz d)
[     3.557] (II) modeset(0): Modeline "700x525"x120.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[     3.557] (II) modeset(0): Modeline "640x512"x120.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[     3.557] (II) modeset(0): Modeline "720x450"x119.8   53.25  720 760 836 952  450 451 454 467 doublescan -hsync +vsync (55.9 kHz d)
[     3.557] (II) modeset(0): Modeline "640x480"x120.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[     3.557] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[     3.557] (II) modeset(0): Modeline "680x384"x119.6   42.38  680 716 784 888  384 385 390 399 doublescan -hsync +vsync (47.7 kHz d)
[     3.557] (II) modeset(0): Modeline "680x384"x119.9   36.00  680 704 720 760  384 385 390 395 doublescan +hsync -vsync (47.4 kHz d)
[     3.557] (II) modeset(0): Modeline "576x432"x120.1   40.81  576 608 668 760  432 432 434 447 doublescan -hsync +vsync (53.7 kHz d)
[     3.557] (II) modeset(0): Modeline "512x384"x120.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[     3.557] (II) modeset(0): Modeline "400x300"x120.6   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[     3.557] (II) modeset(0): Modeline "400x300"x112.7   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[     3.557] (II) modeset(0): Modeline "320x240"x120.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[     3.558] (II) modeset(0): EDID for output HDMI-1
[     3.558] (II) modeset(0): EDID for output DP-1
[     3.558] (II) modeset(0): Output eDP-1 connected
[     3.558] (II) modeset(0): Output HDMI-1 disconnected
[     3.558] (II) modeset(0): Output DP-1 disconnected
[     3.558] (II) modeset(0): Using exact sizes for initial modes
[     3.558] (II) modeset(0): Output eDP-1 using initial mode 1920x1080 +0+0
[     3.558] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[     3.558] (==) modeset(0): DPI set to (96, 96)
[     3.558] (II) Loading sub module "fb"
[     3.558] (II) LoadModule: "fb"
[     3.558] (II) Loading /usr/lib/xorg/modules/libfb.so
[     3.559] (II) Module fb: vendor="X.Org Foundation"
[     3.560]     compiled for 1.19.2, module version = 1.0.0
[     3.560]     ABI class: X.Org ANSI C Emulation, version 0.4
[     3.560] (==) Depth 24 pixmap format is 32 bpp
[     3.669] (==) modeset(0): Backing store enabled
[     3.669] (==) modeset(0): Silken mouse enabled
[     3.670] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[     3.670] (==) modeset(0): DPMS enabled
[     3.670] (WW) modeset(0): Option "AllowEmptyInitialConfiguration" is not used
[     3.671] (II) modeset(0): [DRI2] Setup complete
[     3.671] (II) modeset(0): [DRI2]   DRI driver: i965
[     3.671] (II) modeset(0): [DRI2]   VDPAU driver: i965
[     3.671] (--) RandR disabled
[     3.675] (II) SELinux: Disabled on system
[     3.682] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[     3.682] (II) AIGLX: enabled GLX_ARB_create_context
[     3.682] (II) AIGLX: enabled GLX_ARB_create_context_profile
[     3.682] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[     3.682] (II) AIGLX: enabled GLX_INTEL_swap_event
[     3.682] (II) AIGLX: enabled GLX_SGI_swap_control
[     3.682] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[     3.682] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[     3.682] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[     3.682] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[     3.682] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[     3.683] (II) AIGLX: Loaded and initialized i965
[     3.683] (II) GLX: Initialized DRI2 GL provider for screen 0
[     3.687] (II) modeset(0): Damage tracking initialized
[     3.687] (II) modeset(0): Setting screen physical size to 508 x 285
[     3.749] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[     3.749] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[     3.749] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     3.749] (II) LoadModule: "libinput"
[     3.749] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[     3.754] (II) Module libinput: vendor="X.Org Foundation"
[     3.754]     compiled for 1.19.0, module version = 0.23.0
[     3.754]     Module class: X.Org XInput Driver
[     3.754]     ABI class: X.Org XInput driver, version 24.1
[     3.754] (II) Using input driver 'libinput' for 'Power Button'
[     3.754] (**) Power Button: always reports core events
[     3.754] (**) Option "Device" "/dev/input/event5"
[     3.754] (**) Option "_source" "server/udev"
[     3.755] (II) input device 'Power Button', /dev/input/event5 is tagged by udev as: Keyboard
[     3.755] (II) input device 'Power Button', /dev/input/event5 is a keyboard
[     3.768] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5"
[     3.768] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[     3.768] (**) Option "xkb_model" "pc105"
[     3.768] (**) Option "xkb_layout" "pl"
[     3.786] (II) input device 'Power Button', /dev/input/event5 is tagged by udev as: Keyboard
[     3.786] (II) input device 'Power Button', /dev/input/event5 is a keyboard
[     3.786] (II) config/udev: Adding input device Video Bus (/dev/input/event10)
[     3.786] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[     3.786] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[     3.786] (II) Using input driver 'libinput' for 'Video Bus'
[     3.786] (**) Video Bus: always reports core events
[     3.786] (**) Option "Device" "/dev/input/event10"
[     3.786] (**) Option "_source" "server/udev"
[     3.787] (II) input device 'Video Bus', /dev/input/event10 is tagged by udev as: Keyboard
[     3.787] (II) input device 'Video Bus', /dev/input/event10 is a keyboard
[     3.804] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input11/event10"
[     3.804] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[     3.804] (**) Option "xkb_model" "pc105"
[     3.804] (**) Option "xkb_layout" "pl"
[     3.804] (II) input device 'Video Bus', /dev/input/event10 is tagged by udev as: Keyboard
[     3.804] (II) input device 'Video Bus', /dev/input/event10 is a keyboard
[     3.804] (II) config/udev: Adding input device Video Bus (/dev/input/event11)
[     3.804] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[     3.804] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[     3.804] (II) Using input driver 'libinput' for 'Video Bus'
[     3.804] (**) Video Bus: always reports core events
[     3.804] (**) Option "Device" "/dev/input/event11"
[     3.804] (**) Option "_source" "server/udev"
[     3.805] (II) input device 'Video Bus', /dev/input/event11 is tagged by udev as: Keyboard
[     3.805] (II) input device 'Video Bus', /dev/input/event11 is a keyboard
[     3.820] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:47/LNXVIDEO:01/input/input12/event11"
[     3.820] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[     3.820] (**) Option "xkb_model" "pc105"
[     3.820] (**) Option "xkb_layout" "pl"
[     3.820] (II) input device 'Video Bus', /dev/input/event11 is tagged by udev as: Keyboard
[     3.820] (II) input device 'Video Bus', /dev/input/event11 is a keyboard
[     3.820] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[     3.820] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[     3.820] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     3.820] (II) Using input driver 'libinput' for 'Power Button'
[     3.820] (**) Power Button: always reports core events
[     3.820] (**) Option "Device" "/dev/input/event2"
[     3.820] (**) Option "_source" "server/udev"
[     3.821] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
[     3.821] (II) input device 'Power Button', /dev/input/event2 is a keyboard
[     3.836] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event2"
[     3.836] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[     3.836] (**) Option "xkb_model" "pc105"
[     3.836] (**) Option "xkb_layout" "pl"
[     3.836] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
[     3.836] (II) input device 'Power Button', /dev/input/event2 is a keyboard
[     3.837] (II) config/udev: Adding input device Lid Switch (/dev/input/event4)
[     3.837] (II) No input driver specified, ignoring this device.
[     3.837] (II) This device may have been added with another device file.
[     3.837] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[     3.837] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[     3.837] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[     3.837] (II) Using input driver 'libinput' for 'Sleep Button'
[     3.837] (**) Sleep Button: always reports core events
[     3.837] (**) Option "Device" "/dev/input/event3"
[     3.837] (**) Option "_source" "server/udev"
[     3.837] (II) input device 'Sleep Button', /dev/input/event3 is tagged by udev as: Keyboard
[     3.837] (II) input device 'Sleep Button', /dev/input/event3 is a keyboard
[     3.852] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3/event3"
[     3.852] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
[     3.852] (**) Option "xkb_model" "pc105"
[     3.852] (**) Option "xkb_layout" "pl"
[     3.852] (II) input device 'Sleep Button', /dev/input/event3 is tagged by udev as: Keyboard
[     3.852] (II) input device 'Sleep Button', /dev/input/event3 is a keyboard
[     3.853] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event14)
[     3.853] (II) No input driver specified, ignoring this device.
[     3.853] (II) This device may have been added with another device file.
[     3.853] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event15)
[     3.853] (II) No input driver specified, ignoring this device.
[     3.853] (II) This device may have been added with another device file.
[     3.853] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event16)
[     3.853] (II) No input driver specified, ignoring this device.
[     3.853] (II) This device may have been added with another device file.
[     3.854] (II) config/udev: Adding input device SIGMACHIP Usb Mouse (/dev/input/event1)
[     3.854] (**) SIGMACHIP Usb Mouse: Applying InputClass "evdev pointer catchall"
[     3.854] (**) SIGMACHIP Usb Mouse: Applying InputClass "libinput pointer catchall"
[     3.854] (II) Using input driver 'libinput' for 'SIGMACHIP Usb Mouse'
[     3.854] (**) SIGMACHIP Usb Mouse: always reports core events
[     3.854] (**) Option "Device" "/dev/input/event1"
[     3.854] (**) Option "_source" "server/udev"
[     3.912] (II) input device 'SIGMACHIP Usb Mouse', /dev/input/event1 is tagged by udev as: Mouse
[     3.912] (II) input device 'SIGMACHIP Usb Mouse', /dev/input/event1 is a pointer caps
[     3.944] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:1C4F:0003.0002/input/input1/event1"
[     3.944] (II) XINPUT: Adding extended input device "SIGMACHIP Usb Mouse" (type: MOUSE, id 11)
[     3.944] (**) Option "AccelerationScheme" "none"
[     3.944] (**) SIGMACHIP Usb Mouse: (accel) selected scheme none/0
[     3.944] (**) SIGMACHIP Usb Mouse: (accel) acceleration factor: 2.000
[     3.944] (**) SIGMACHIP Usb Mouse: (accel) acceleration threshold: 4
[     4.004] (II) input device 'SIGMACHIP Usb Mouse', /dev/input/event1 is tagged by udev as: Mouse
[     4.004] (II) input device 'SIGMACHIP Usb Mouse', /dev/input/event1 is a pointer caps
[     4.004] (II) config/udev: Adding input device SIGMACHIP Usb Mouse (/dev/input/mouse0)
[     4.004] (II) No input driver specified, ignoring this device.
[     4.004] (II) This device may have been added with another device file.
[     4.005] (II) config/udev: Adding input device HD WebCam (/dev/input/event17)
[     4.005] (**) HD WebCam: Applying InputClass "evdev keyboard catchall"
[     4.005] (**) HD WebCam: Applying InputClass "libinput keyboard catchall"
[     4.005] (II) Using input driver 'libinput' for 'HD WebCam'
[     4.005] (**) HD WebCam: always reports core events
[     4.005] (**) Option "Device" "/dev/input/event17"
[     4.005] (**) Option "_source" "server/udev"
[     4.005] (II) input device 'HD WebCam', /dev/input/event17 is tagged by udev as: Keyboard
[     4.005] (II) input device 'HD WebCam', /dev/input/event17 is a keyboard
[     4.036] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-7/2-7:1.0/input/input18/event17"
[     4.036] (II) XINPUT: Adding extended input device "HD WebCam" (type: KEYBOARD, id 12)
[     4.036] (**) Option "xkb_model" "pc105"
[     4.036] (**) Option "xkb_layout" "pl"
[     4.036] (II) input device 'HD WebCam', /dev/input/event17 is tagged by udev as: Keyboard
[     4.036] (II) input device 'HD WebCam', /dev/input/event17 is a keyboard
[     4.036] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event9)
[     4.037] (II) No input driver specified, ignoring this device.
[     4.037] (II) This device may have been added with another device file.
[     4.037] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8)
[     4.037] (II) No input driver specified, ignoring this device.
[     4.037] (II) This device may have been added with another device file.
[     4.037] (II) config/udev: Adding input device SYN1B81:01 06CB:7406 Touchpad (/dev/input/event6)
[     4.037] (**) SYN1B81:01 06CB:7406 Touchpad: Applying InputClass "evdev touchpad catchall"
[     4.037] (**) SYN1B81:01 06CB:7406 Touchpad: Applying InputClass "libinput touchpad catchall"
[     4.037] (**) SYN1B81:01 06CB:7406 Touchpad: Applying InputClass "touchpad catchall"
[     4.037] (**) SYN1B81:01 06CB:7406 Touchpad: Applying InputClass "Default clickpad buttons"
[     4.037] (II) LoadModule: "synaptics"
[     4.037] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[     4.039] (II) Module synaptics: vendor="X.Org Foundation"
[     4.039]     compiled for 1.19.0, module version = 1.9.0
[     4.039]     Module class: X.Org XInput Driver
[     4.039]     ABI class: X.Org XInput driver, version 24.1
[     4.039] (II) Using input driver 'synaptics' for 'SYN1B81:01 06CB:7406 Touchpad'
[     4.039] (**) SYN1B81:01 06CB:7406 Touchpad: always reports core events
[     4.039] (**) Option "Device" "/dev/input/event6"
[     4.100] (II) synaptics: SYN1B81:01 06CB:7406 Touchpad: found clickpad property
[     4.100] (--) synaptics: SYN1B81:01 06CB:7406 Touchpad: x-axis range 0 - 1236 (res 12)
[     4.100] (--) synaptics: SYN1B81:01 06CB:7406 Touchpad: y-axis range 0 - 898 (res 12)
[     4.100] (II) synaptics: SYN1B81:01 06CB:7406 Touchpad: device does not report pressure, will use touch data.
[     4.100] (II) synaptics: SYN1B81:01 06CB:7406 Touchpad: device does not report finger width.
[     4.100] (--) synaptics: SYN1B81:01 06CB:7406 Touchpad: buttons: left double triple
[     4.100] (--) synaptics: SYN1B81:01 06CB:7406 Touchpad: Vendor 0x6cb Product 0x7406
[     4.100] (--) synaptics: SYN1B81:01 06CB:7406 Touchpad: invalid pressure range.  defaulting to 0 - 255
[     4.100] (--) synaptics: SYN1B81:01 06CB:7406 Touchpad: invalid finger width range.  defaulting to 0 - 15
[     4.100] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[     4.100] (--) synaptics: SYN1B81:01 06CB:7406 Touchpad: touchpad found
[     4.100] (**) SYN1B81:01 06CB:7406 Touchpad: always reports core events
[     4.140] (**) Option "config_info" "udev:/sys/devices/pci0000:00/INT3432:00/i2c-0/i2c-SYN1B81:01/0018:06CB:7406.0001/input/input6/event6"
[     4.140] (II) XINPUT: Adding extended input device "SYN1B81:01 06CB:7406 Touchpad" (type: TOUCHPAD, id 13)
[     4.140] (**) synaptics: SYN1B81:01 06CB:7406 Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[     4.140] (**) synaptics: SYN1B81:01 06CB:7406 Touchpad: (accel) MaxSpeed is now 1.75
[     4.140] (**) synaptics: SYN1B81:01 06CB:7406 Touchpad: (accel) AccelFactor is now 0.131
[     4.140] (**) SYN1B81:01 06CB:7406 Touchpad: (accel) keeping acceleration scheme 1
[     4.140] (**) SYN1B81:01 06CB:7406 Touchpad: (accel) acceleration profile 1
[     4.140] (**) SYN1B81:01 06CB:7406 Touchpad: (accel) acceleration factor: 2.000
[     4.140] (**) SYN1B81:01 06CB:7406 Touchpad: (accel) acceleration threshold: 4
[     4.140] (--) synaptics: SYN1B81:01 06CB:7406 Touchpad: touchpad found
[     4.141] (II) config/udev: Adding input device SYN1B81:01 06CB:7406 Touchpad (/dev/input/mouse1)
[     4.141] (**) SYN1B81:01 06CB:7406 Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[     4.141] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[     4.141] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[     4.141] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[     4.141] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[     4.141] (**) AT Translated Set 2 keyboard: always reports core events
[     4.141] (**) Option "Device" "/dev/input/event0"
[     4.141] (**) Option "_source" "server/udev"
[     4.141] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[     4.141] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[     4.164] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[     4.164] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
[     4.164] (**) Option "xkb_model" "pc105"
[     4.164] (**) Option "xkb_layout" "pl"
[     4.164] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[     4.164] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[     4.164] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)
[     4.164] (II) No input driver specified, ignoring this device.
[     4.164] (II) This device may have been added with another device file.
[     4.165] (II) config/udev: Adding input device Acer WMI hotkeys (/dev/input/event12)
[     4.165] (**) Acer WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[     4.165] (**) Acer WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[     4.165] (II) Using input driver 'libinput' for 'Acer WMI hotkeys'
[     4.165] (**) Acer WMI hotkeys: always reports core events
[     4.165] (**) Option "Device" "/dev/input/event12"
[     4.165] (**) Option "_source" "server/udev"
[     4.165] (II) input device 'Acer WMI hotkeys', /dev/input/event12 is tagged by udev as: Keyboard
[     4.165] (II) input device 'Acer WMI hotkeys', /dev/input/event12 is a keyboard
[     4.172] (**) Option "config_info" "udev:/sys/devices/virtual/input/input13/event12"
[     4.172] (II) XINPUT: Adding extended input device "Acer WMI hotkeys" (type: KEYBOARD, id 15)
[     4.172] (**) Option "xkb_model" "pc105"
[     4.172] (**) Option "xkb_layout" "pl"
[     4.172] (II) input device 'Acer WMI hotkeys', /dev/input/event12 is tagged by udev as: Keyboard
[     4.172] (II) input device 'Acer WMI hotkeys', /dev/input/event12 is a keyboard
[     4.173] (II) config/udev: Adding input device Acer BMA150 accelerometer (/dev/input/event13)
[     4.173] (II) No input driver specified, ignoring this device.
[     4.173] (II) This device may have been added with another device file.
[     4.173] (II) config/udev: Adding input device Acer BMA150 accelerometer (/dev/input/js0)
[     4.173] (II) No input driver specified, ignoring this device.
[     4.173] (II) This device may have been added with another device file.
[    14.452] (II) modeset(0): EDID vendor "AUO", prod id 14573
[    14.452] (II) modeset(0): Printing DDC gathered Modelines:
[    14.452] (II) modeset(0): Modeline "1920x1080"x0.0  142.00  1920 2028 2076 2100  1080 1090 1100 1126 -hsync -vsync (67.6 kHz eP)
[    14.576] (II) modeset(0): EDID vendor "AUO", prod id 14573
[    14.576] (II) modeset(0): Printing DDC gathered Modelines:
[    14.576] (II) modeset(0): Modeline "1920x1080"x0.0  142.00  1920 2028 2076 2100  1080 1090 1100 1126 -hsync -vsync (67.6 kHz eP)
[  1838.444] (II) AIGLX: Suspending AIGLX clients for VT switch
[  1958.400] (II) AIGLX: Resuming AIGLX clients after VT switch
[  1958.466] (II) modeset(0): EDID vendor "AUO", prod id 14573
[  1958.466] (II) modeset(0): Printing DDC gathered Modelines:
[  1958.466] (II) modeset(0): Modeline "1920x1080"x0.0  142.00  1920 2028 2076 2100  1080 1090 1100 1126 -hsync -vsync (67.6 kHz eP)
[  1958.483] (II) input device 'Power Button', /dev/input/event5 is tagged by udev as: Keyboard
[  1958.483] (II) input device 'Power Button', /dev/input/event5 is a keyboard
[  1958.483] (II) input device 'Video Bus', /dev/input/event10 is tagged by udev as: Keyboard
[  1958.483] (II) input device 'Video Bus', /dev/input/event10 is a keyboard
[  1958.484] (II) input device 'Video Bus', /dev/input/event11 is tagged by udev as: Keyboard
[  1958.484] (II) input device 'Video Bus', /dev/input/event11 is a keyboard
[  1958.484] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
[  1958.484] (II) input device 'Power Button', /dev/input/event2 is a keyboard
[  1958.485] (II) input device 'Sleep Button', /dev/input/event3 is tagged by udev as: Keyboard
[  1958.485] (II) input device 'Sleep Button', /dev/input/event3 is a keyboard
[  1958.544] (II) input device 'SIGMACHIP Usb Mouse', /dev/input/event1 is tagged by udev as: Mouse
[  1958.544] (II) input device 'SIGMACHIP Usb Mouse', /dev/input/event1 is a pointer caps
[  1958.544] (II) input device 'HD WebCam', /dev/input/event17 is tagged by udev as: Keyboard
[  1958.545] (II) input device 'HD WebCam', /dev/input/event17 is a keyboard
[  1958.545] (--) synaptics: SYN1B81:01 06CB:7406 Touchpad: touchpad found
[  1958.546] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[  1958.546] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[  1958.546] (II) input device 'Acer WMI hotkeys', /dev/input/event12 is tagged by udev as: Keyboard
[  1958.546] (II) input device 'Acer WMI hotkeys', /dev/input/event12 is a keyboard
root@irin:/home/milik#

Kod:

root@irin:/home/milik# cat /var/log/Xorg.8.log
[   283.265] 
X.Org X Server 1.19.2
Release Date: 2017-03-02
[   283.265] X Protocol Version 11, Revision 0
[   283.265] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[   283.265] Current Operating System: Linux irin 4.9.0-3-amd64 #1 SMP Debian 4.9.25-1 (2017-05-02) x86_64
[   283.265] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-3-amd64 root=UUID=58195624-edb9-4b1d-8bef-babc60edc831 ro pcie_port_pm=off quiet rcutree.rcu_idle_gp_delay=1
[   283.265] Build Date: 03 March 2017  03:14:41PM
[   283.265] xorg-server 2:1.19.2-1 (https://www.debian.org/support) 
[   283.265] Current version of pixman: 0.34.0
[   283.265]     Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[   283.265] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   283.266] (==) Log file: "/var/log/Xorg.8.log", Time: Thu Jun  1 20:18:14 2017
[   283.266] (++) Using config file: "/etc/bumblebee/xorg.conf.nvidia"
[   283.266] (++) Using config directory: "/etc/bumblebee/xorg.conf.d"
[   283.266] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   283.266] (==) ServerLayout "Layout0"
[   283.266] (==) No screen section available. Using defaults.
[   283.266] (**) |-->Screen "Default Screen Section" (0)
[   283.266] (**) |   |-->Monitor "<default monitor>"
[   283.266] (==) No device specified for screen "Default Screen Section".
    Using the first device section listed.
[   283.266] (**) |   |-->Device "GeForce 940M"
[   283.266] (**) |   |-->GPUDevice "intel"
[   283.266] (**) |   |-->GPUDevice "DiscreteNvidia"
[   283.266] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
[   283.266] (**) Option "AutoAddDevices" "false"
[   283.266] (**) Option "AutoAddGPU" "false"
[   283.266] (**) Not automatically adding devices
[   283.266] (==) Automatically enabling devices
[   283.266] (**) Not automatically adding GPU devices
[   283.266] (==) Max clients allowed: 256, resource mask: 0x1fffff
[   283.266] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[   283.266]     Entry deleted from font path.
[   283.266] (==) FontPath set to:
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/100dpi/:unscaled,
    /usr/share/fonts/X11/75dpi/:unscaled,
    /usr/share/fonts/X11/Type1,
    /usr/share/fonts/X11/100dpi,
    /usr/share/fonts/X11/75dpi,
    built-ins
[   283.266] (++) ModulePath set to "/usr/lib/nvidia/nvidia,/usr/lib/xorg/modules"
[   283.266] (==) |-->Input Device "<default pointer>"
[   283.266] (==) |-->Input Device "<default keyboard>"
[   283.266] (==) The core pointer device wasn't specified explicitly in the layout.
    Using the default mouse configuration.
[   283.266] (==) The core keyboard device wasn't specified explicitly in the layout.
    Using the default keyboard configuration.
[   283.266] (II) Loader magic: 0x563d1d6e0e00
[   283.266] (II) Module ABI versions:
[   283.266]     X.Org ANSI C Emulation: 0.4
[   283.266]     X.Org Video Driver: 23.0
[   283.266]     X.Org XInput driver : 24.1
[   283.266]     X.Org Server Extension : 10.0
[   283.267] (--) using VT number 7

[   283.267] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[   283.267] (II) xfree86: Adding drm device (/dev/dri/card0)
[   283.267] (EE) /dev/dri/card0: failed to set DRM interface version 1.4: Permission denied
[   283.269] (--) PCI:*(0:4:0:0) 10de:1347:1025:098c rev 162, Mem @ 0xc3000000/16777216, 0xb0000000/268435456, 0xc0000000/33554432, I/O @ 0x00003000/128
[   283.269] (II) "glx" will be loaded by default.
[   283.269] (II) LoadModule: "modesetting"
[   283.269] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[   283.269] (II) Module modesetting: vendor="X.Org Foundation"
[   283.269]     compiled for 1.19.2, module version = 1.19.2
[   283.269]     Module class: X.Org Video Driver
[   283.269]     ABI class: X.Org Video Driver, version 23.0
[   283.269] (II) LoadModule: "glx"
[   283.269] (II) Loading /usr/lib/nvidia/nvidia/libglx.so
[   283.273] (II) Module glx: vendor="NVIDIA Corporation"
[   283.273]     compiled for 4.0.2, module version = 1.0.0
[   283.273]     Module class: X.Org Server Extension
[   283.273] (II) NVIDIA GLX Module  375.66  Mon May  1 14:28:39 PDT 2017
[   283.273] (II) LoadModule: "modesetting"
[   283.273] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[   283.273] (II) Module modesetting: vendor="X.Org Foundation"
[   283.273]     compiled for 1.19.2, module version = 1.19.2
[   283.273]     Module class: X.Org Video Driver
[   283.273]     ABI class: X.Org Video Driver, version 23.0
[   283.273] (II) UnloadModule: "modesetting"
[   283.273] (II) Unloading modesetting
[   283.273] (II) Failed to load module "modesetting" (already loaded, 22077)
[   283.273] (II) LoadModule: "nvidia"
[   283.273] (II) Loading /usr/lib/nvidia/nvidia/nvidia_drv.so
[   283.273] (II) Module nvidia: vendor="NVIDIA Corporation"
[   283.273]     compiled for 4.0.2, module version = 1.0.0
[   283.273]     Module class: X.Org Video Driver
[   283.273] (II) LoadModule: "mouse"
[   283.274] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
[   283.274] (II) Module mouse: vendor="X.Org Foundation"
[   283.274]     compiled for 1.19.0, module version = 1.9.2
[   283.274]     Module class: X.Org XInput Driver
[   283.274]     ABI class: X.Org XInput driver, version 24.1
[   283.274] (II) LoadModule: "kbd"
[   283.274] (WW) Warning, couldn't open module kbd
[   283.274] (II) UnloadModule: "kbd"
[   283.274] (II) Unloading kbd
[   283.274] (EE) Failed to load module "kbd" (module does not exist, 0)
[   283.274] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[   283.274] (II) NVIDIA dlloader X Driver  375.66  Mon May  1 14:03:26 PDT 2017
[   283.274] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[   283.274] (WW) Falling back to old probe method for modesetting
[   283.274] (II) modeset(2): using default device
[   283.274] (II) modeset(2): using default device
[   283.274] (II) Loading sub module "fb"
[   283.274] (II) LoadModule: "fb"
[   283.274] (II) Loading /usr/lib/xorg/modules/libfb.so
[   283.274] (II) Module fb: vendor="X.Org Foundation"
[   283.274]     compiled for 1.19.2, module version = 1.0.0
[   283.274]     ABI class: X.Org ANSI C Emulation, version 0.4
[   283.274] (II) Loading sub module "wfb"
[   283.274] (II) LoadModule: "wfb"
[   283.274] (II) Loading /usr/lib/xorg/modules/libwfb.so
[   283.274] (II) Module wfb: vendor="X.Org Foundation"
[   283.274]     compiled for 1.19.2, module version = 1.0.0
[   283.274]     ABI class: X.Org ANSI C Emulation, version 0.4
[   283.275] (II) Loading sub module "ramdac"
[   283.275] (II) LoadModule: "ramdac"
[   283.275] (II) Module "ramdac" already built-in
[   283.275] (EE) Screen 0 deleted because of no matching config section.
[   283.275] (II) UnloadModule: "modesetting"
[   283.275] (EE) Screen 0 deleted because of no matching config section.
[   283.275] (II) UnloadModule: "modesetting"
[   283.275] (EE) Screen 1 deleted because of no matching config section.
[   283.275] (II) UnloadModule: "nvidia"
[   283.275] (II) UnloadSubModule: "wfb"
[   283.275] (II) UnloadSubModule: "fb"
[   283.275] (EE) 
Fatal server error:
[   283.275] (EE) Cannot run in framebuffer mode. Please specify busIDs        for all framebuffer devices
[   283.275] (EE) 
[   283.275] (EE) 
Please consult the The X.Org Foundation support 
     at http://wiki.x.org
 for help. 
[   283.275] (EE) Please also check the log file at "/var/log/Xorg.8.log" for additional information.
[   283.275] (EE) 
[   283.275] (EE) Server terminated with error (1). Closing log file.
root@irin:/home/milik#

Kod:

root@irin:/home/milik# cat /etc/bumblebee/xorg.conf.nvidia
Section "ServerLayout"
    Identifier  "Layout0"
    Option      "AutoAddDevices" "false"
    Option      "AutoAddGPU" "false"
EndSection

Section "Device"
    Identifier  "DiscreteNvidia"
    Driver      "nvidia"
    VendorName  "NVIDIA Corporation"

#   If the X server does not automatically detect your VGA device,
#   you can manually set it here.
#   To get the BusID prop, run `lspci | egrep 'VGA|3D'` and input the data
#   as you see in the commented example.
#   This Setting may be needed in some platforms with more than one
#   nvidia card, which may confuse the proprietary driver (e.g.,
#   trying to take ownership of the wrong device). Also needed on Ubuntu 13.04.
#   BusID "PCI:01:00:0"

#   Setting ProbeAllGpus to false prevents the new proprietary driver
#   instance spawned to try to control the integrated graphics card,
#   which is already being managed outside bumblebee.
#   This option doesn't hurt and it is required on platforms running
#   more than one nvidia graphics card with the proprietary driver.
#   (E.g. Macbook Pro pre-2010 with nVidia 9400M + 9600M GT).
#   If this option is not set, the new Xorg may blacken the screen and
#   render it unusable (unless you have some way to run killall Xorg).
    Option "ProbeAllGpus" "false"

    Option "NoLogo" "true"
    Option "UseEDID" "false"
    Option "UseDisplayDevice" "none"
EndSection
root@irin:/home/milik#

Offline

 

#33  2017-06-01 21:01:25

  jawojx - Użytkownik

jawojx
Użytkownik
Zarejestrowany: 2012-10-11

Re: Zacinanie openshot-qt

Tam jeszcze dopisałem. Czy wycofałeś wszystkie zmiany jak chciałeś zrobić "ręczne" przełączanie np. w /etc/lightdm/lightdm.conf. Może tu coś zostało /etc/lightdm/display_setup.sh.

Offline

 

#34  2017-06-01 21:11:07

  milik - Użytkownik

milik
Użytkownik
Zarejestrowany: 2008-11-11

Re: Zacinanie openshot-qt

W  /etc/lightdm/lightdm.conf linijka display setup script jest zchaszowana #, skrypt display_setup.sh też usunąłem.

Kod:

milik@irin:~$ optirun -vv glxgears
[   39.832939] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
[   39.833205] [DEBUG]optirun version 3.2.1 starting...
[   39.833213] [DEBUG]Active configuration:
[   39.833218] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
[   39.833224] [DEBUG] X display: :8
[   39.833229] [DEBUG] LD_LIBRARY_PATH: /usr/lib/x86_64-linux-gnu/nvidia:/usr/lib/i386-linux-gnu/nvidia:/usr/lib/nvidia
[   39.833232] [DEBUG] Socket path: /var/run/bumblebee.socket
[   39.833236] [DEBUG] Accel/display bridge: auto
[   39.833247] [DEBUG] VGL Compression: proxy
[   39.833255] [DEBUG] VGLrun extra options: 
[   39.833262] [DEBUG] Primus LD Path: /usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus:/usr/lib/primus:/usr/lib32/primus
[   39.833551] [DEBUG]Using auto-detected bridge primus
[   40.045327] [INFO]Response: No - error: [XORG] (EE) Screen 0 deleted because of no matching config section.

[   40.045347] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) Screen 0 deleted because of no matching config section.

[   40.045358] [DEBUG]Socket closed.
[   40.045380] [ERROR]Aborting because fallback start is disabled.
[   40.045387] [DEBUG]Killing all remaining processes.
milik@irin:~$

Tu w LD_LIBRARY PATH jest sciezka do nvidii, może to jest przyczyną tego całego syfu?

Ostatnio edytowany przez milik (2017-06-01 21:14:59)

Offline

 

#35  2017-06-01 21:34:09

  jawojx - Użytkownik

jawojx
Użytkownik
Zarejestrowany: 2012-10-11

Re: Zacinanie openshot-qt

Nie to jest zmienna podana tylko na czas uruchomienia, ona się nie zapisała na stałe. Sterownik intela działa prawidłowo, a nvidia nie chce się uruchomić na ekranie 0 z braku skonfigurowanej sekcji. Zaraz sprawdzę to wszystko dokładnie gdzieś została zmiana i tyle.
Po usunięciu  /etc/lightdm/display_setup.sh zrestartowałeś komputer ?

Offline

 

#36  2017-06-01 21:35:59

  milik - Użytkownik

milik
Użytkownik
Zarejestrowany: 2008-11-11

Re: Zacinanie openshot-qt

Tak, to po restarcie było wpisane. Kuźwa, rozkłada mnie już ten komputer. Żeby karty nie można było uruchomić to aż niemożliwe.

Offline

 

#37  2017-06-01 23:39:24

  jawojx - Użytkownik

jawojx
Użytkownik
Zarejestrowany: 2012-10-11

Re: Zacinanie openshot-qt

Parę rzeczy zrobiłem u siebie porównałem configi i dalej nie wiem dlaczego on szuka sekcji dla tego screen-a skoro wcześniej jej nie miał i było dobrze, ale wpadło mi parę pomysłów.

Pokaż co tam było w /etc/X11/xorg.conf_zapas i skasuj go, sprawdź czy nie ma tam innych configów. Nie masz folderu /etc/X11/xorg.conf.d/ tak jak pisałeś, lub nic tam nie ma.

Przekonfiguruj parę pakietów.

Kod:

dpkg-reconfigure xserver-xorg

Kod:

dpkg-reconfigure bumblebee-nvidia

Kod:

dpkg-reconfigure bbswitch-dkms

Teraz zrestartuj komputer i sprawdź czy nvidia działa:

Kod:

optirun glxinfo | grep OpenGL

Jak dalej jest ten sam błąd to w /etc/bumblebee/xorg.conf.nvidia dodaj na samym dole taki wpis:

Kod:

Section "Screen"
    Identifier "Default Screen"
    Device "DiscreteNvidia"
EndSection

I sprawdź.

A jeszcze ty domyślny masz lightdm, tak.

Kod:

cat /etc/X11/default-display-manager

A ja jeszcze jutro zobaczę, na świeżynkę.

Offline

 

#38  2017-06-05 21:18:29

  milik - Użytkownik

milik
Użytkownik
Zarejestrowany: 2008-11-11

Re: Zacinanie openshot-qt

Kod:

root@irin:/home/milik# cat /etc/X11/xorg.conf_zapas
Section "ServerLayout"
    Identifier     "X.org Configured"
    Screen      0  "Screen0" 0 0
    Screen      1  "Screen1" RightOf "Screen0"
    InputDevice    "Mouse0" "CorePointer"
    InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
    ModulePath   "/usr/lib/xorg/modules"
    FontPath     "/usr/share/fonts/X11/misc"
    FontPath     "/usr/share/fonts/X11/cyrillic"
    FontPath     "/usr/share/fonts/X11/100dpi/:unscaled"
    FontPath     "/usr/share/fonts/X11/75dpi/:unscaled"
    FontPath     "/usr/share/fonts/X11/Type1"
    FontPath     "/usr/share/fonts/X11/100dpi"
    FontPath     "/usr/share/fonts/X11/75dpi"
    FontPath     "built-ins"
EndSection

Section "Module"
    Load  "glx"
EndSection

Section "InputDevice"
    Identifier  "Keyboard0"
    Driver      "kbd"
EndSection

Section "InputDevice"
    Identifier  "Mouse0"
    Driver      "mouse"
    Option        "Protocol" "auto"
    Option        "Device" "/dev/input/mice"
    Option        "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
    Identifier   "Monitor0"
    VendorName   "Monitor Vendor"
    ModelName    "Monitor Model"
EndSection

Section "Monitor"
    Identifier   "Monitor1"
    VendorName   "Monitor Vendor"
    ModelName    "Monitor Model"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
        ### <percent>: "<f>%"
        ### [arg]: arg optional
        #Option     "Accel"                  # [<bool>]
        #Option     "AccelMethod"            # <str>
        #Option     "Backlight"              # <str>
        #Option     "CustomEDID"             # <str>
        #Option     "DRI"                    # <str>
        #Option     "Present"                # [<bool>]
        #Option     "ColorKey"               # <i>
        #Option     "VideoKey"               # <i>
        #Option     "Tiling"                 # [<bool>]
        #Option     "LinearFramebuffer"      # [<bool>]
        #Option     "HWRotation"             # [<bool>]
        #Option     "VSync"                  # [<bool>]
        #Option     "PageFlip"               # [<bool>]
        #Option     "SwapbuffersWait"        # [<bool>]
        #Option     "TripleBuffer"           # [<bool>]
        #Option     "XvPreferOverlay"        # [<bool>]
        #Option     "HotPlug"                # [<bool>]
        #Option     "ReprobeOutputs"         # [<bool>]
        #Option     "XvMC"                   # [<bool>]
        #Option     "ZaphodHeads"            # <str>
        #Option     "VirtualHeads"           # <i>
        #Option     "TearFree"               # [<bool>]
        #Option     "PerCrtcPixmaps"         # [<bool>]
        #Option     "FallbackDebug"          # [<bool>]
        #Option     "DebugFlushBatches"      # [<bool>]
        #Option     "DebugFlushCaches"       # [<bool>]
        #Option     "DebugWait"              # [<bool>]
        #Option     "BufferCache"            # [<bool>]
    Identifier  "Card0"
    Driver      "intel"
    BusID       "PCI:0:2:0"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
        ### <percent>: "<f>%"
        ### [arg]: arg optional
        #Option     "SWcursor"               # [<bool>]
        #Option     "HWcursor"               # [<bool>]
        #Option     "NoAccel"                # [<bool>]
        #Option     "ShadowFB"               # [<bool>]
        #Option     "VideoKey"               # <i>
        #Option     "WrappedFB"              # [<bool>]
        #Option     "GLXVBlank"              # [<bool>]
        #Option     "ZaphodHeads"            # <str>
        #Option     "PageFlip"               # [<bool>]
        #Option     "SwapLimit"              # <i>
        #Option     "AsyncUTSDFS"            # [<bool>]
        #Option     "AccelMethod"            # <str>
        #Option     "DRI"                    # <i>
    Identifier  "Card1"
    Driver      "nouveau"
    BusID       "PCI:4:0:0"
EndSection

Section "Screen"
    Identifier "Screen0"
    Device     "Card0"
    Monitor    "Monitor0"
    SubSection "Display"
        Viewport   0 0
        Depth     1
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     4
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     8
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     15
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     16
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     24
    EndSubSection
EndSection

Section "Screen"
    Identifier "Screen1"
    Device     "Card1"
    Monitor    "Monitor1"
    SubSection "Display"
        Viewport   0 0
        Depth     1
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     4
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     8
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     15
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     16
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     24
    EndSubSection
EndSection

root@irin:/home/milik#

Coś przekonfigurowanie tego pierwszego pakietu nie poszło tak jak trzeba, jakby nic się nie wykonało.

Kod:

root@irin:/home/milik# dpkg-reconfigure xserver-xorg
root@irin:/home/milik#

Kod:

root@irin:/home/milik# optirun glxinfo | grep OpenGL
[  145.226328] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) Screen 0 deleted because of no matching config section.

[  145.226378] [ERROR]Aborting because fallback start is disabled.
root@irin:/home/milik#

Kod:

root@irin:/home/milik# cat /etc/X11/default-display-manager
/usr/sbin/lightdm
root@irin:/home/milik#

Ostatnio edytowany przez milik (2017-06-05 21:30:33)

Offline

 

#39  2017-06-05 22:34:06

  jawojx - Użytkownik

jawojx
Użytkownik
Zarejestrowany: 2012-10-11

Re: Zacinanie openshot-qt

Skąd ty wziąłeś tego xorga.conf, którego zapisaliśmy jako /etc/X11/xorg.conf_zapas. To jest ustawione na dwa ekrany i sterowniki  Driver  "nouveau", powinno być nvidia. Trzeba było skopiować te proste ustawienia z linku co ci dałem. Teraz to nic trzeba zobaczyć gdzie jest błąd.
Wywaliłeś ten xorg.conf_zapas, nie ma tm już ustawień xorg.

Czy po usunięciu xorg.conf i dodaniu tego, zrestartowałeś komputer.

Jak dalej jest ten sam błąd to w /etc/bumblebee/xorg.conf.nvidia dodaj na samym dole taki wpis:

Kod:

Section "Screen"
    Identifier "Default Screen"
    Device "DiscreteNvidia"
EndSection

Jak to nic nie dało to wycofaj te zmiany zrestartuj komputer, sprawdź.
Pokaż.

Kod:

cat /etc/bumblebee/bumblebee.conf

Jak dalej nic się nie zmieniło, możesz spróbować przeinstalować pakiety z usunięciem ich konfiguracji, ostrożnie to powinno zaproponować usuniecie trzech pakietów bumblebee bumblebee-nvidia primus, tylko trzech:

Kod:

apt-get purge  bumblebee bumblebee-nvidia

Po odinstalowaniu zainstaluj je ponownie.

Kod:

apt-get install bumblebee bumblebee-nvidia primus

Zrestartuj komputer i sprawdź.

Ostatnio edytowany przez jawojx (2017-06-05 23:01:03)

Offline

 

#40  2017-06-06 20:14:25

  milik - Użytkownik

milik
Użytkownik
Zarejestrowany: 2008-11-11

Re: Zacinanie openshot-qt

Kod:

root@irin:/home/milik# cat /etc/bumblebee/bumblebee.conf
# Configuration file for Bumblebee. Values should **not** be put between quotes

## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d
# Xorg binary to run
XorgBinary=/usr/lib/xorg/Xorg

## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=auto
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus:/usr/lib/primus:/usr/lib32/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false


# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
#         bbswitch - new in BB 3, recommended if available
#       switcheroo - vga_switcheroo method, use at your own risk
#             none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods

## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/x86_64-linux-gnu/nvidia:/usr/lib/i386-linux-gnu/nvidia:/usr/lib/nvidia
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia/nvidia,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia

## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau

root@irin:/home/milik#

Z konta usera wygląda to tak:

Kod:

milik@irin:~$ optirun glxinfo | grep OpenGL
[  118.547587] [ERROR]You've no permission to communicate with the Bumblebee daemon. Try adding yourself to the 'bumblebee' group
[  118.547642] [ERROR]Could not connect to bumblebee daemon - is it running?
milik@irin:~$

Z roota natomiast tak:

Kod:

root@irin:/home/milik# optirun glxinfo | grep OpenGL
[  130.934333] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) Screen 0 deleted because of no matching config section.

[  130.934371] [ERROR]Aborting because fallback start is disabled.
root@irin:/home/milik#

edyta\

Oczywiście do grupy jestem dodany.

Ostatnio edytowany przez milik (2017-06-06 22:44:57)

Offline

 

#41  2017-06-07 00:23:30

  jawojx - Użytkownik

jawojx
Użytkownik
Zarejestrowany: 2012-10-11

Re: Zacinanie openshot-qt

Jest ?

Kod:

grep bumblebee /etc/group

Nie ma błędów po:

Kod:

service bumblebee restart

milik:...Oczywiście do grupy jestem dodany...

Najśmieszniejsze że wcale tego nie trzeba normalnie robić, ale nic to nie zepsuje. Na pewno jesteś dodany, sprawdzałeś. Ze zwykłego konta.

Kod:

groups $USER

lub

Kod:

id $USER

Przeinstalujmy:

Kod:

apt-get install --reinstll bbswitch-dkms

Restart i sprawdź.
W /etc/bumblebee/bumblebee.conf wszystko jest jak powinno być, na razie go nie ruszamy. Może wszystkie moduły dla nvidii trzeba budować od nowa, zobaczymy.

Ostatnio edytowany przez jawojx (2017-06-07 00:24:57)

Offline

 

#42  2017-06-07 19:47:55

  milik - Użytkownik

milik
Użytkownik
Zarejestrowany: 2008-11-11

Re: Zacinanie openshot-qt

Kurde, nie ma usera w grupie bumblebeed :/

Kod:

root@irin:/home/milik# mc

root@irin:/home/milik# grep bumblebee /etc/group
bumblebee:x:999:
root@irin:/home/milik# service bumblebee restart
Failed to restart bumblebee.service: Unit bumblebee.service not found.
root@irin:/home/milik# /etc/init.d/bumblebeed restart
[ ok ] Restarting bumblebeed (via systemctl): bumblebeed.service.
root@irin:/home/milik# groups $USER
root : root
root@irin:/home/milik# # usermod -a -G bumblebee milik
root@irin:/home/milik#

Po dodaniu usera do grupy, jak widać wyżej ciągle nie ma milik w grupie bumblebeed.

Kod:

milik@irin:~$ groups $USER
milik : milik cdrom floppy audio dip video plugdev netdev lpadmin scanner bluetooth
milik@irin:~$

Offline

 

#43  2017-06-07 20:08:32

  jawojx - Użytkownik

jawojx
Użytkownik
Zarejestrowany: 2012-10-11

Re: Zacinanie openshot-qt

Przelogowałeś się ?

Offline

 

#44  2017-06-07 20:54:02

  milik - Użytkownik

milik
Użytkownik
Zarejestrowany: 2008-11-11

Re: Zacinanie openshot-qt

No tak, zrobiłem relog i ciągle nie ma mnie w tej grupie.

edyta\

Dodałem siebie do grupy przez manager jakiś tam. Teraz mamy:

Kod:

milik@irin:~$ optirun glxinfo | grep OpenGL
[   67.521908] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) Screen 0 deleted because of no matching config section.

[   67.521971] [ERROR]Aborting because fallback start is disabled.
milik@irin:~$

Ostatnio edytowany przez milik (2017-06-07 20:58:44)

Offline

 

#45  2017-06-07 21:31:47

  jawojx - Użytkownik

jawojx
Użytkownik
Zarejestrowany: 2012-10-11

Re: Zacinanie openshot-qt

Zrobiłeś to z posta 41.

Kod:

apt-get install --reinstll bbswitch-dkms

Jak dalej nic, przeinstaluj dkms dla nvidii:

Kod:

apt-get install --reinstall nvidia-kernel-dkms

Jak nic się nie zmieniło, to w ostateczności możesz przeinstalować linux-headers, to przebuduje moduły dla nvidii, pierwsze odinstaluj :

Kod:

apt-get purge bumblebee-nvidia bbswitch-dkms

Przeinstaluj  linux-headers:

Kod:

apt-get install --reinstall linux-headers-$(uname -r)

i zainstaluj ponownie:

Kod:

apt-get install bumblebee-nvidia bbswitch-dkms

Po tym powinno być jak w nowej instalacji. Zrestartuj komputer i sprawdź.
A jak wygląda to z normalnego użytkownika.

Kod:

optirun --status

Zajrzałem do twojej historii postów, i widzę że już wałkowałeś trochę inny problem z działaniem nvidii:
https://forum.dug.net.pl/viewtopic.php?pid=307355#p307355

Ostatnio edytowany przez jawojx (2017-06-07 21:37:10)

Offline

 

#46  2017-06-07 21:54:57

  milik - Użytkownik

milik
Użytkownik
Zarejestrowany: 2008-11-11

Re: Zacinanie openshot-qt

Tak, nawet udało się to zrobić ostatnio. Ale to raz działało a raz nie, stąd moja próba odpalenia nvidii na stałe.

Kod:

milik@irin:~$ optirun --status
Bumblebee status: Ready (3.2.1). X inactive. Discrete video card is off.

milik@irin:~$

Offline

 

#47  2017-06-07 22:11:46

  jawojx - Użytkownik

jawojx
Użytkownik
Zarejestrowany: 2012-10-11

Re: Zacinanie openshot-qt

To:

Kod:

# tee /proc/acpi/bbswitch <<< ON

nie zmienia :

Kod:

optirun --status

Offline

 

#48  2017-06-07 22:14:48

  milik - Użytkownik

milik
Użytkownik
Zarejestrowany: 2008-11-11

Re: Zacinanie openshot-qt

Kod:

milik@irin:~$ optirun --status
Bumblebee status: Ready (3.2.1). X inactive. Discrete video card is on.

milik@irin:~$

Offline

 

#49  2017-06-07 22:25:53

  jawojx - Użytkownik

jawojx
Użytkownik
Zarejestrowany: 2012-10-11

Re: Zacinanie openshot-qt

No działa, po tym co zrobiłeś sprawdzałeś:

Kod:

glxinfo | grep OpenGL

i

Kod:

optirun glxinfo | grep OpenGL

Edycja: Umknęło mi to.

milik: Tak, nawet udało się to zrobić ostatnio. Ale to raz działało a raz nie, stąd moja próba odpalenia nvidii na stałe.

Przywracamy działanie optirun bo nie udało ci się ustawić nvidii jako domyślnej „na stałe” z porad z linków w poście nr.6 na dole.

W Debianie karty można przełączać w biosie ( nie każdy to umożliwia ), przez bumblebee i bez bumblebee jak nazwałeś „na stałe”. Tak jak to pisałem wpadło mi coś do głowy, czy ty na pewno odinstalowałeś bumblebee przed ustawianiem „na stałe”, bo chyba nie i z tego mogły wynikać błędy w działaniu.

Ostatnio edytowany przez jawojx (2017-06-08 10:13:13)

Offline

 

#50  2017-06-08 18:58:49

  milik - Użytkownik

milik
Użytkownik
Zarejestrowany: 2008-11-11

Re: Zacinanie openshot-qt

Kod:

milik@irin:~$ glxinfo | grep OpenGL
OpenGL vendor string: Intel Open Source Technology Center
OpenGL renderer string: Mesa DRI Intel(R) HD Graphics 5500 (Broadwell GT2) 
OpenGL core profile version string: 4.5 (Core Profile) Mesa 13.0.6
OpenGL core profile shading language version string: 4.50
OpenGL core profile context flags: (none)
OpenGL core profile profile mask: core profile
OpenGL core profile extensions:
OpenGL version string: 3.0 Mesa 13.0.6
OpenGL shading language version string: 1.30
OpenGL context flags: (none)
OpenGL extensions:
OpenGL ES profile version string: OpenGL ES 3.1 Mesa 13.0.6
OpenGL ES profile shading language version string: OpenGL ES GLSL ES 3.10
OpenGL ES profile extensions:
milik@irin:~$ optirun glxinfo | grep OpenGL
[75176.248699] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) Screen 0 deleted because of no matching config section.

[75176.248739] [ERROR]Aborting because fallback start is disabled.
milik@irin:~$

Na bank nie odinstalowałem bumblebee przed próbą ustawienia "na stałe", bo nie wiedziałem, że tak trzeba.

Offline

 

Stopka forum

Powered by PunBB
© Copyright 2002–2005 Rickard Andersson
Możesz wyłączyć AdBlock — tu nie ma reklam ;-)