Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!
Ogłoszenie
Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.
#1 2017-02-18 01:31:16
Merle - Nowy użytkownik
- Merle
- Nowy użytkownik
- Zarejestrowany: 2017-02-17
debian/xfce4 nvidia Xorg nie działa
Witam,
szukałem, kombinowałem, reinstalowałem... wiedza coraz większa a efektów brak.
otóż:
po zainstalowaniu drivera nvidia-driver 375.26-2 Xorg nie startuje... a właściwie startuje lecz go nie widać ;)
jakkolwiek dziwnie by to nie brzmiało, to jednak jest pewna różnica jeśli coś przestaje działać, lub działa dalej.
uparłem sie trochę na te drivery od NVIDII z powodu openGL jakoś przy nouveau jest gorzej (gracze bywają wybredni).
mój xorg.conf, bez tego Xorg działa, ale bez nvidii i bez openGL
Kod:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 375.26 (buildd@debian) Fri Jan 13 02:38:29 UTC 2017
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
EndSection
Section "Files"
EndSection
Section "Monitor"
Identifier "eDP-1"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
Section "Monitor"
Identifier "HDMI-1"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
Section "Device"
Identifier "GeForce GT 755M"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BusId "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "GeForce GT 755M"
#Monitor "HDMI-1"
Monitor "eDP-1"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSectionlog Xorg.1.log po startx
Kod:
[ 355.315]
X.Org X Server 1.19.1
Release Date: 2017-01-11
[ 355.316] X Protocol Version 11, Revision 0
[ 355.317] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[ 355.317] Current Operating System: Linux merlap 4.9.0-1-amd64 #1 SMP Debian 4.9.6-3 (2017-01-28) x86_64
[ 355.317] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-1-amd64 root=UUID=ccc56ec1-a850-4ecf-afb7-c0bb7dca489e ro quiet splash
[ 355.318] Build Date: 20 January 2017 02:50:48AM
[ 355.319] xorg-server 2:1.19.1-4 (https://www.debian.org/support)
[ 355.319] Current version of pixman: 0.34.0
[ 355.321] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 355.321] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 355.324] (==) Log file: "/var/log/Xorg.1.log", Time: Sat Feb 18 00:50:13 2017
[ 355.325] (==) Using config file: "/etc/X11/xorg.conf"
[ 355.326] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 355.326] (==) ServerLayout "Layout0"
[ 355.326] (**) |-->Screen "Screen0" (0)
[ 355.326] (**) | |-->Monitor "eDP-1"
[ 355.326] (**) | |-->Device "GeForce GT 755M"
[ 355.326] (==) Automatically adding devices
[ 355.326] (==) Automatically enabling devices
[ 355.326] (==) Automatically adding GPU devices
[ 355.326] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 355.326] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 355.326] Entry deleted from font path.
[ 355.326] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 355.326] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 355.326] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 355.326] (II) Loader magic: 0x55f788c97e00
[ 355.326] (II) Module ABI versions:
[ 355.326] X.Org ANSI C Emulation: 0.4
[ 355.326] X.Org Video Driver: 23.0
[ 355.326] X.Org XInput driver : 24.1
[ 355.326] X.Org Server Extension : 10.0
[ 355.327] (++) using VT number 2
[ 355.328] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_33
[ 355.329] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 355.329] (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 11 paused 0
[ 355.329] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 355.329] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 12 paused 0
[ 355.330] (--) PCI:*(0:0:2:0) 8086:0416:17aa:3801 rev 6, Mem @ 0xc2000000/4194304, 0xb0000000/268435456, I/O @ 0x00005000/64, BIOS @ 0x????????/131072
[ 355.330] (--) PCI: (0:1:0:0) 10de:0fcd:17aa:3801 rev 161, Mem @ 0xc0000000/16777216, 0x90000000/268435456, 0xa0000000/33554432, I/O @ 0x00004000/128, BIOS @ 0x????????/524288
[ 355.330] (II) LoadModule: "glx"
[ 355.330] (II) Loading /usr/lib/xorg/modules/linux/libglx.so
[ 355.333] (II) Module glx: vendor="NVIDIA Corporation"
[ 355.333] compiled for 4.0.2, module version = 1.0.0
[ 355.333] Module class: X.Org Server Extension
[ 355.333] (II) NVIDIA GLX Module 375.26 Thu Dec 8 17:59:51 PST 2016
[ 355.333] (II) LoadModule: "nvidia"
[ 355.333] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 355.333] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 355.333] compiled for 4.0.2, module version = 1.0.0
[ 355.333] Module class: X.Org Video Driver
[ 355.333] (II) NVIDIA dlloader X Driver 375.26 Thu Dec 8 17:37:15 PST 2016
[ 355.333] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 355.333] (II) systemd-logind: releasing fd for 226:1
[ 355.334] (II) Loading sub module "fb"
[ 355.334] (II) LoadModule: "fb"
[ 355.334] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 355.334] (II) Module fb: vendor="X.Org Foundation"
[ 355.334] compiled for 1.19.1, module version = 1.0.0
[ 355.334] ABI class: X.Org ANSI C Emulation, version 0.4
[ 355.334] (II) Loading sub module "wfb"
[ 355.334] (II) LoadModule: "wfb"
[ 355.334] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 355.334] (II) Module wfb: vendor="X.Org Foundation"
[ 355.334] compiled for 1.19.1, module version = 1.0.0
[ 355.334] ABI class: X.Org ANSI C Emulation, version 0.4
[ 355.334] (II) Loading sub module "ramdac"
[ 355.334] (II) LoadModule: "ramdac"
[ 355.334] (II) Module "ramdac" already built-in
[ 355.334] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 355.334] (==) NVIDIA(0): RGB weight 888
[ 355.334] (==) NVIDIA(0): Default visual is TrueColor
[ 355.334] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 355.334] (**) NVIDIA(0): Enabling 2D acceleration
[ 355.337] (II) NVIDIA(0): NVIDIA GPU GeForce GT 755M (GK107) at PCI:1:0:0 (GPU-0)
[ 355.337] (--) NVIDIA(0): Memory: 2097152 kBytes
[ 355.337] (--) NVIDIA(0): VideoBIOS: 80.07.a8.00.0f
[ 355.337] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 355.337] (II) NVIDIA(0): Validated MetaModes:
[ 355.337] (II) NVIDIA(0): "NULL"
[ 355.337] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
[ 355.337] (WW) NVIDIA(0): Unable to get display device for DPI computation.
[ 355.337] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[ 355.337] (--) Depth 24 pixmap format is 32 bpp
[ 355.338] (II) NVIDIA: Using 12288.00 MB of virtual memory for indirect memory
[ 355.338] (II) NVIDIA: access.
[ 355.362] (II) NVIDIA(0): Built-in logo is bigger than the screen.
[ 355.363] (II) NVIDIA(0): Setting mode "NULL"
[ 355.368] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 355.368] (==) NVIDIA(0): Backing store enabled
[ 355.368] (==) NVIDIA(0): Silken mouse enabled
[ 355.368] (**) NVIDIA(0): DPMS enabled
[ 355.368] (II) Loading sub module "dri2"
[ 355.368] (II) LoadModule: "dri2"
[ 355.368] (II) Module "dri2" already built-in
[ 355.368] (II) NVIDIA(0): [DRI2] Setup complete
[ 355.368] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 355.368] (--) RandR disabled
[ 355.370] (II) SELinux: Disabled on system
[ 355.370] (II) Initializing extension GLX
[ 355.370] (II) Indirect GLX disabled.
[ 355.397] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 355.397] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 355.397] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 355.397] (II) LoadModule: "libinput"
[ 355.397] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 355.398] (II) Module libinput: vendor="X.Org Foundation"
[ 355.398] compiled for 1.19.0, module version = 0.23.0
[ 355.398] Module class: X.Org XInput Driver
[ 355.398] ABI class: X.Org XInput driver, version 24.1
[ 355.398] (II) Using input driver 'libinput' for 'Power Button'
[ 355.399] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 37 paused 0
[ 355.399] (**) Power Button: always reports core events
[ 355.399] (**) Option "Device" "/dev/input/event4"
[ 355.399] (**) Option "_source" "server/udev"
[ 355.399] (II) input device 'Power Button', /dev/input/event4 is tagged by udev as: Keyboard
[ 355.399] (II) input device 'Power Button', /dev/input/event4 is a keyboard
[ 355.399] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event4"
[ 355.399] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 355.399] (**) Option "xkb_model" "pc105"
[ 355.399] (**) Option "xkb_layout" "pl"
[ 355.410] (II) input device 'Power Button', /dev/input/event4 is tagged by udev as: Keyboard
[ 355.410] (II) input device 'Power Button', /dev/input/event4 is a keyboard
[ 355.410] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[ 355.410] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 355.410] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 355.410] (II) Using input driver 'libinput' for 'Video Bus'
[ 355.410] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 40 paused 0
[ 355.410] (**) Video Bus: always reports core events
[ 355.410] (**) Option "Device" "/dev/input/event6"
[ 355.410] (**) Option "_source" "server/udev"
[ 355.411] (II) input device 'Video Bus', /dev/input/event6 is tagged by udev as: Keyboard
[ 355.411] (II) input device 'Video Bus', /dev/input/event6 is a keyboard
[ 355.411] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input8/event6"
[ 355.411] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 355.411] (**) Option "xkb_model" "pc105"
[ 355.411] (**) Option "xkb_layout" "pl"
[ 355.411] (II) input device 'Video Bus', /dev/input/event6 is tagged by udev as: Keyboard
[ 355.411] (II) input device 'Video Bus', /dev/input/event6 is a keyboard
[ 355.411] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 355.411] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 355.411] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 355.411] (II) Using input driver 'libinput' for 'Power Button'
[ 355.411] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 41 paused 0
[ 355.412] (**) Power Button: always reports core events
[ 355.412] (**) Option "Device" "/dev/input/event1"
[ 355.412] (**) Option "_source" "server/udev"
[ 355.412] (II) input device 'Power Button', /dev/input/event1 is tagged by udev as: Keyboard
[ 355.412] (II) input device 'Power Button', /dev/input/event1 is a keyboard
[ 355.412] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input2/event1"
[ 355.412] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 355.412] (**) Option "xkb_model" "pc105"
[ 355.412] (**) Option "xkb_layout" "pl"
[ 355.412] (II) input device 'Power Button', /dev/input/event1 is tagged by udev as: Keyboard
[ 355.412] (II) input device 'Power Button', /dev/input/event1 is a keyboard
[ 355.412] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 355.412] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 355.412] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 355.412] (II) Using input driver 'libinput' for 'Sleep Button'
[ 355.413] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 42 paused 0
[ 355.413] (**) Sleep Button: always reports core events
[ 355.413] (**) Option "Device" "/dev/input/event2"
[ 355.413] (**) Option "_source" "server/udev"
[ 355.413] (II) input device 'Sleep Button', /dev/input/event2 is tagged by udev as: Keyboard
[ 355.413] (II) input device 'Sleep Button', /dev/input/event2 is a keyboard
[ 355.413] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0E:00/input/input3/event2"
[ 355.413] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 355.413] (**) Option "xkb_model" "pc105"
[ 355.413] (**) Option "xkb_layout" "pl"
[ 355.413] (II) input device 'Sleep Button', /dev/input/event2 is tagged by udev as: Keyboard
[ 355.413] (II) input device 'Sleep Button', /dev/input/event2 is a keyboard
[ 355.413] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 355.413] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 355.413] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 355.413] (II) Using input driver 'libinput' for 'Video Bus'
[ 355.414] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 43 paused 0
[ 355.414] (**) Video Bus: always reports core events
[ 355.414] (**) Option "Device" "/dev/input/event5"
[ 355.414] (**) Option "_source" "server/udev"
[ 355.414] (II) input device 'Video Bus', /dev/input/event5 is tagged by udev as: Keyboard
[ 355.414] (II) input device 'Video Bus', /dev/input/event5 is a keyboard
[ 355.414] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:4c/LNXVIDEO:00/input/input7/event5"
[ 355.414] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 10)
[ 355.414] (**) Option "xkb_model" "pc105"
[ 355.414] (**) Option "xkb_layout" "pl"
[ 355.414] (II) input device 'Video Bus', /dev/input/event5 is tagged by udev as: Keyboard
[ 355.414] (II) input device 'Video Bus', /dev/input/event5 is a keyboard
[ 355.414] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[ 355.414] (II) No input driver specified, ignoring this device.
[ 355.414] (II) This device may have been added with another device file.
[ 355.415] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event15)
[ 355.415] (II) No input driver specified, ignoring this device.
[ 355.415] (II) This device may have been added with another device file.
[ 355.415] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event16)
[ 355.415] (II) No input driver specified, ignoring this device.
[ 355.415] (II) This device may have been added with another device file.
[ 355.415] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event17)
[ 355.415] (II) No input driver specified, ignoring this device.
[ 355.415] (II) This device may have been added with another device file.
[ 355.415] (II) config/udev: Adding input device Lenovo EasyCamera (/dev/input/event21)
[ 355.415] (**) Lenovo EasyCamera: Applying InputClass "evdev keyboard catchall"
[ 355.415] (**) Lenovo EasyCamera: Applying InputClass "libinput keyboard catchall"
[ 355.415] (II) Using input driver 'libinput' for 'Lenovo EasyCamera'
[ 355.416] (II) systemd-logind: got fd for /dev/input/event21 13:85 fd 44 paused 0
[ 355.416] (**) Lenovo EasyCamera: always reports core events
[ 355.416] (**) Option "Device" "/dev/input/event21"
[ 355.416] (**) Option "_source" "server/udev"
[ 355.416] (II) input device 'Lenovo EasyCamera', /dev/input/event21 is tagged by udev as: Keyboard
[ 355.416] (II) input device 'Lenovo EasyCamera', /dev/input/event21 is a keyboard
[ 355.416] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/input/input22/event21"
[ 355.416] (II) XINPUT: Adding extended input device "Lenovo EasyCamera" (type: KEYBOARD, id 11)
[ 355.416] (**) Option "xkb_model" "pc105"
[ 355.416] (**) Option "xkb_layout" "pl"
[ 355.416] (II) input device 'Lenovo EasyCamera', /dev/input/event21 is tagged by udev as: Keyboard
[ 355.416] (II) input device 'Lenovo EasyCamera', /dev/input/event21 is a keyboard
[ 355.417] (II) config/udev: Adding input device LXD Gaming Mouse (/dev/input/event8)
[ 355.417] (**) LXD Gaming Mouse: Applying InputClass "evdev keyboard catchall"
[ 355.417] (**) LXD Gaming Mouse: Applying InputClass "libinput keyboard catchall"
[ 355.417] (II) Using input driver 'libinput' for 'LXD Gaming Mouse'
[ 355.417] (II) systemd-logind: got fd for /dev/input/event8 13:72 fd 45 paused 0
[ 355.417] (**) LXD Gaming Mouse: always reports core events
[ 355.417] (**) Option "Device" "/dev/input/event8"
[ 355.417] (**) Option "_source" "server/udev"
[ 355.417] (II) input device 'LXD Gaming Mouse', /dev/input/event8 is tagged by udev as: Keyboard
[ 355.417] (II) input device 'LXD Gaming Mouse', /dev/input/event8 is a keyboard
[ 355.417] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/0003:1D57:AD03.0001/input/input9/event8"
[ 355.417] (II) XINPUT: Adding extended input device "LXD Gaming Mouse" (type: KEYBOARD, id 12)
[ 355.417] (**) Option "xkb_model" "pc105"
[ 355.417] (**) Option "xkb_layout" "pl"
[ 355.418] (II) input device 'LXD Gaming Mouse', /dev/input/event8 is tagged by udev as: Keyboard
[ 355.418] (II) input device 'LXD Gaming Mouse', /dev/input/event8 is a keyboard
[ 355.418] (II) config/udev: Adding input device LXD Gaming Mouse (/dev/input/event9)
[ 355.418] (**) LXD Gaming Mouse: Applying InputClass "evdev pointer catchall"
[ 355.418] (**) LXD Gaming Mouse: Applying InputClass "evdev keyboard catchall"
[ 355.418] (**) LXD Gaming Mouse: Applying InputClass "libinput pointer catchall"
[ 355.418] (**) LXD Gaming Mouse: Applying InputClass "libinput keyboard catchall"
[ 355.418] (II) Using input driver 'libinput' for 'LXD Gaming Mouse'
[ 355.418] (II) systemd-logind: got fd for /dev/input/event9 13:73 fd 46 paused 0
[ 355.418] (**) LXD Gaming Mouse: always reports core events
[ 355.418] (**) Option "Device" "/dev/input/event9"
[ 355.418] (**) Option "_source" "server/udev"
[ 355.419] (II) input device 'LXD Gaming Mouse', /dev/input/event9 is tagged by udev as: Keyboard Mouse
[ 355.419] (II) input device 'LXD Gaming Mouse', /dev/input/event9 is a pointer caps
[ 355.419] (II) input device 'LXD Gaming Mouse', /dev/input/event9 is a keyboard
[ 355.419] (II) libinput: LXD Gaming Mouse: needs a virtual subdevice
[ 355.419] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/0003:1D57:AD03.0002/input/input10/event9"
[ 355.419] (II) XINPUT: Adding extended input device "LXD Gaming Mouse" (type: MOUSE, id 13)
[ 355.419] (**) Option "AccelerationScheme" "none"
[ 355.419] (**) LXD Gaming Mouse: (accel) selected scheme none/0
[ 355.419] (**) LXD Gaming Mouse: (accel) acceleration factor: 2.000
[ 355.419] (**) LXD Gaming Mouse: (accel) acceleration threshold: 4
[ 355.419] (II) input device 'LXD Gaming Mouse', /dev/input/event9 is tagged by udev as: Keyboard Mouse
[ 355.419] (II) input device 'LXD Gaming Mouse', /dev/input/event9 is a pointer caps
[ 355.419] (II) input device 'LXD Gaming Mouse', /dev/input/event9 is a keyboard
[ 355.419] (II) config/udev: Adding input device LXD Gaming Mouse (/dev/input/mouse1)
[ 355.419] (II) No input driver specified, ignoring this device.
[ 355.419] (II) This device may have been added with another device file.
[ 355.419] (II) config/udev: Adding input device NOVATEK USB Keyboard (/dev/input/event10)
[ 355.419] (**) NOVATEK USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 355.419] (**) NOVATEK USB Keyboard: Applying InputClass "libinput keyboard catchall"
[ 355.419] (II) Using input driver 'libinput' for 'NOVATEK USB Keyboard'
[ 355.420] (II) systemd-logind: got fd for /dev/input/event10 13:74 fd 47 paused 0
[ 355.420] (**) NOVATEK USB Keyboard: always reports core events
[ 355.420] (**) Option "Device" "/dev/input/event10"
[ 355.420] (**) Option "_source" "server/udev"
[ 355.420] (II) input device 'NOVATEK USB Keyboard', /dev/input/event10 is tagged by udev as: Keyboard
[ 355.420] (II) input device 'NOVATEK USB Keyboard', /dev/input/event10 is a keyboard
[ 355.420] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/0003:0461:0010.0003/input/input11/event10"
[ 355.420] (II) XINPUT: Adding extended input device "NOVATEK USB Keyboard" (type: KEYBOARD, id 14)
[ 355.420] (**) Option "xkb_model" "pc105"
[ 355.420] (**) Option "xkb_layout" "pl"
[ 355.420] (II) input device 'NOVATEK USB Keyboard', /dev/input/event10 is tagged by udev as: Keyboard
[ 355.420] (II) input device 'NOVATEK USB Keyboard', /dev/input/event10 is a keyboard
[ 355.421] (II) config/udev: Adding input device NOVATEK USB Keyboard (/dev/input/event11)
[ 355.421] (**) NOVATEK USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 355.421] (**) NOVATEK USB Keyboard: Applying InputClass "libinput keyboard catchall"
[ 355.421] (II) Using input driver 'libinput' for 'NOVATEK USB Keyboard'
[ 355.421] (II) systemd-logind: got fd for /dev/input/event11 13:75 fd 48 paused 0
[ 355.421] (**) NOVATEK USB Keyboard: always reports core events
[ 355.421] (**) Option "Device" "/dev/input/event11"
[ 355.421] (**) Option "_source" "server/udev"
[ 355.421] (II) input device 'NOVATEK USB Keyboard', /dev/input/event11 is tagged by udev as: Keyboard
[ 355.421] (II) input device 'NOVATEK USB Keyboard', /dev/input/event11 is a keyboard
[ 355.421] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1/0003:0461:0010.0004/input/input12/event11"
[ 355.421] (II) XINPUT: Adding extended input device "NOVATEK USB Keyboard" (type: KEYBOARD, id 15)
[ 355.421] (**) Option "xkb_model" "pc105"
[ 355.421] (**) Option "xkb_layout" "pl"
[ 355.422] (II) input device 'NOVATEK USB Keyboard', /dev/input/event11 is tagged by udev as: Keyboard
[ 355.422] (II) input device 'NOVATEK USB Keyboard', /dev/input/event11 is a keyboard
[ 355.422] (II) config/udev: Adding input device Creative Technology Ltd. SB Tactic3D Rage Wireless (/dev/input/event12)
[ 355.422] (**) Creative Technology Ltd. SB Tactic3D Rage Wireless: Applying InputClass "evdev keyboard catchall"
[ 355.422] (**) Creative Technology Ltd. SB Tactic3D Rage Wireless: Applying InputClass "libinput keyboard catchall"
[ 355.422] (II) Using input driver 'libinput' for 'Creative Technology Ltd. SB Tactic3D Rage Wireless'
[ 355.422] (II) systemd-logind: got fd for /dev/input/event12 13:76 fd 49 paused 0
[ 355.423] (**) Creative Technology Ltd. SB Tactic3D Rage Wireless: always reports core events
[ 355.423] (**) Option "Device" "/dev/input/event12"
[ 355.423] (**) Option "_source" "server/udev"
[ 355.423] (II) input device 'Creative Technology Ltd. SB Tactic3D Rage Wireless', /dev/input/event12 is tagged by udev as: Keyboard
[ 355.423] (II) input device 'Creative Technology Ltd. SB Tactic3D Rage Wireless', /dev/input/event12 is a keyboard
[ 355.423] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.3/0003:041E:3225.0005/input/input13/event12"
[ 355.423] (II) XINPUT: Adding extended input device "Creative Technology Ltd. SB Tactic3D Rage Wireless" (type: KEYBOARD, id 16)
[ 355.423] (**) Option "xkb_model" "pc105"
[ 355.423] (**) Option "xkb_layout" "pl"
[ 355.423] (II) input device 'Creative Technology Ltd. SB Tactic3D Rage Wireless', /dev/input/event12 is tagged by udev as: Keyboard
[ 355.423] (II) input device 'Creative Technology Ltd. SB Tactic3D Rage Wireless', /dev/input/event12 is a keyboard
[ 355.423] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event18)
[ 355.423] (II) No input driver specified, ignoring this device.
[ 355.423] (II) This device may have been added with another device file.
[ 355.423] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event19)
[ 355.423] (II) No input driver specified, ignoring this device.
[ 355.423] (II) This device may have been added with another device file.
[ 355.423] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event20)
[ 355.424] (II) No input driver specified, ignoring this device.
[ 355.424] (II) This device may have been added with another device file.
[ 355.424] (II) config/udev: Adding input device Ideapad extra buttons (/dev/input/event13)
[ 355.424] (**) Ideapad extra buttons: Applying InputClass "evdev keyboard catchall"
[ 355.424] (**) Ideapad extra buttons: Applying InputClass "libinput keyboard catchall"
[ 355.424] (II) Using input driver 'libinput' for 'Ideapad extra buttons'
[ 355.424] (II) systemd-logind: got fd for /dev/input/event13 13:77 fd 50 paused 0
[ 355.424] (**) Ideapad extra buttons: always reports core events
[ 355.424] (**) Option "Device" "/dev/input/event13"
[ 355.424] (**) Option "_source" "server/udev"
[ 355.424] (II) input device 'Ideapad extra buttons', /dev/input/event13 is tagged by udev as: Keyboard
[ 355.424] (II) input device 'Ideapad extra buttons', /dev/input/event13 is a keyboard
[ 355.424] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input14/event13"
[ 355.424] (II) XINPUT: Adding extended input device "Ideapad extra buttons" (type: KEYBOARD, id 17)
[ 355.424] (**) Option "xkb_model" "pc105"
[ 355.424] (**) Option "xkb_layout" "pl"
[ 355.425] (II) input device 'Ideapad extra buttons', /dev/input/event13 is tagged by udev as: Keyboard
[ 355.425] (II) input device 'Ideapad extra buttons', /dev/input/event13 is a keyboard
[ 355.425] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 355.425] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 355.425] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 355.425] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 355.425] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 51 paused 0
[ 355.425] (**) AT Translated Set 2 keyboard: always reports core events
[ 355.425] (**) Option "Device" "/dev/input/event0"
[ 355.425] (**) Option "_source" "server/udev"
[ 355.425] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[ 355.425] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[ 355.425] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 355.425] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 18)
[ 355.425] (**) Option "xkb_model" "pc105"
[ 355.426] (**) Option "xkb_layout" "pl"
[ 355.426] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[ 355.426] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[ 355.426] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event7)
[ 355.426] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[ 355.426] (**) ETPS/2 Elantech Touchpad: Applying InputClass "libinput touchpad catchall"
[ 355.426] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[ 355.426] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[ 355.426] (II) LoadModule: "synaptics"
[ 355.426] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 355.426] (II) Module synaptics: vendor="X.Org Foundation"
[ 355.426] compiled for 1.19.0, module version = 1.9.0
[ 355.426] Module class: X.Org XInput Driver
[ 355.426] ABI class: X.Org XInput driver, version 24.1
[ 355.426] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[ 355.427] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 52 paused 0
[ 355.427] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 355.427] (**) Option "Device" "/dev/input/event7"
[ 355.427] (II) synaptics: ETPS/2 Elantech Touchpad: found clickpad property
[ 355.427] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 3260 (res 33)
[ 355.427] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 2119 (res 33)
[ 355.427] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[ 355.427] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
[ 355.427] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left double triple
[ 355.427] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[ 355.427] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[ 355.427] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 355.427] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 355.427] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input6/event7"
[ 355.427] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 19)
[ 355.427] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[ 355.427] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
[ 355.427] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.051
[ 355.427] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[ 355.427] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[ 355.427] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[ 355.427] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[ 355.427] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 355.427] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0)
[ 355.427] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 355.427] (II) config/udev: Adding input device PC Speaker (/dev/input/event14)
[ 355.427] (II) No input driver specified, ignoring this device.
[ 355.427] (II) This device may have been added with another device file.
[ 355.429] (**) LXD Gaming Mouse: Applying InputClass "evdev pointer catchall"
[ 355.429] (**) LXD Gaming Mouse: Applying InputClass "evdev keyboard catchall"
[ 355.429] (**) LXD Gaming Mouse: Applying InputClass "libinput pointer catchall"
[ 355.429] (**) LXD Gaming Mouse: Applying InputClass "libinput keyboard catchall"
[ 355.429] (II) Using input driver 'libinput' for 'LXD Gaming Mouse'
[ 355.429] (II) systemd-logind: returning pre-existing fd for /dev/input/event9 13:73
[ 355.429] (**) LXD Gaming Mouse: always reports core events
[ 355.429] (**) Option "Device" "/dev/input/event9"
[ 355.429] (**) Option "_source" "_driver/libinput"
[ 355.429] (II) libinput: LXD Gaming Mouse: is a virtual subdevice
[ 355.429] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/0003:1D57:AD03.0002/input/input10/event9"
[ 355.429] (II) XINPUT: Adding extended input device "LXD Gaming Mouse" (type: KEYBOARD, id 20)
[ 355.429] (**) Option "xkb_model" "pc105"
[ 355.429] (**) Option "xkb_layout" "pl"
[ 360.372] (**) Option "fd" "37"
[ 360.372] (**) Option "fd" "40"
[ 360.372] (**) Option "fd" "41"
[ 360.372] (**) Option "fd" "42"
[ 360.372] (**) Option "fd" "43"
[ 360.372] (**) Option "fd" "44"
[ 360.372] (**) Option "fd" "45"
[ 360.372] (**) Option "fd" "46"
[ 360.372] (**) Option "fd" "47"
[ 360.372] (**) Option "fd" "48"
[ 360.372] (**) Option "fd" "49"
[ 360.372] (**) Option "fd" "50"
[ 360.372] (**) Option "fd" "51"
[ 360.373] (**) Option "fd" "46"
[ 360.430] (II) systemd-logind: got pause for 13:70
[ 360.430] (II) systemd-logind: got pause for 13:72
[ 360.430] (II) systemd-logind: got pause for 13:73
[ 360.430] (II) systemd-logind: got pause for 13:76
[ 360.430] (II) systemd-logind: got pause for 13:65
[ 360.430] (II) systemd-logind: got pause for 13:68
[ 360.430] (II) systemd-logind: got pause for 13:64
[ 360.430] (II) systemd-logind: got pause for 226:0
[ 360.430] (II) systemd-logind: got pause for 13:71
[ 360.430] (II) systemd-logind: got pause for 13:75
[ 360.430] (II) systemd-logind: got pause for 13:85
[ 360.430] (II) systemd-logind: got pause for 13:74
[ 360.430] (II) systemd-logind: got pause for 13:69
[ 360.430] (II) systemd-logind: got pause for 13:77
[ 360.430] (II) systemd-logind: got pause for 13:66dziwna sprawa, można np wywołać polecenia (po export DISPLAY=:1.0)
np: glxinfo|grep version :
Kod:
server glx version string: 1.4
client glx version string: 1.4
GLX version: 1.4
OpenGL core profile version string: 4.5.0 NVIDIA 375.26
OpenGL core profile shading language version string: 4.50 NVIDIA
OpenGL version string: 4.5.0 NVIDIA 375.26
OpenGL shading language version string: 4.50 NVIDIA
OpenGL ES profile version string: OpenGL ES 3.2 NVIDIA 375.26
OpenGL ES profile shading language version string: OpenGL ES GLSL ES 3.20
GL_EXT_shader_implicit_conversions, GL_EXT_shader_integer_mix,jednak sam ekran graficzny jest nieosiągalny, polecenia można wykonywać tylko z konsoli, no i w zasadzie tylko przy startx
Kod:
Sparkylinux 4.5
Kod:
Laptop Lenowo Ideapad Y510p
Kod:
merlap:~# uname -a Linux merlap 4.9.0-1-amd64 #1 SMP Debian 4.9.6-3 (2017-01-28) x86_64 GNU/Linux
Kod:
merlap:~# lspci 00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor DRAM Controller (rev 06) 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller (rev 06) 00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06) 00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06) 00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI (rev 05) 00:16.0 Communication controller: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 (rev 05) 00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #4 (rev d5) 00:1c.4 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #5 (rev d5) 00:1d.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation HM86 Express LPC Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] (rev 05) 00:1f.3 SMBus: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller (rev 05) 01:00.0 VGA compatible controller: NVIDIA Corporation GK107M [GeForce GT 755M] (rev a1) 07:00.0 Ethernet controller: Qualcomm Atheros QCA8171 Gigabit Ethernet (rev 10) 08:00.0 Network controller: Intel Corporation Centrino Wireless-N 2230 (rev c4)
instalacja w zasadzie nówka sztuka (nowa wersja), ciężko się teraz wycofać, chyba że ktoś zaproponuje dystrybucję która zadziała, chociaż niewydaje mi się żeby to był problem w dystrybucji.
Offline
#2 2017-02-18 12:28:24
jawojx - 
Użytkownik
- jawojx
- Użytkownik
- Zarejestrowany: 2012-10-11
Re: debian/xfce4 nvidia Xorg nie działa
Jakie masz środowisko zainstalowane, a ważniejsze jaki menadżer logowania. Miałem problemy na lightdm przy nowych sterownikach nVidia.
No i może ten xorg.conf sobie zapisz jako backup, a zrób taki prościutki jak tu:
https://wiki.debian.org/NvidiaGraphicsDrivers#Manual
Ostatnio edytowany przez jawojx (2017-02-18 12:33:37)
Offline
#3 2017-02-18 12:36:18
Bodzio - Ojciec Założyciel
Re: debian/xfce4 nvidia Xorg nie działa
Kernel 4.9.0-1 dla 64 bit nie buduje modułu dla nvidii. Zainstaluj kernel z aptosida - powinny skończyć się problemy.
Niedawno to przerabiałem.
Offline
#4 2017-02-18 13:08:00
jawojx - Użytkownik
- jawojx
- Użytkownik
- Zarejestrowany: 2012-10-11
Re: debian/xfce4 nvidia Xorg nie działa
U mnie moduły dla 4.9.0-1 budują się prawidłowo właśnie sprawdziłem, bo też używam aptosida. Wydaje się że tu moduły ładują się prawidłowo. Z tym co ja napisałem też bywa ciekawie, z nVidią jest różnie zależy od sprzętu/zestawu/sterownika na jednym gdm3, na drugim lightdm potrafi robić problemy.
Ostatnio edytowany przez jawojx (2017-02-18 13:08:42)
Offline
#5 2017-02-18 13:44:39
Merle - Nowy użytkownik
- Merle
- Nowy użytkownik
- Zarejestrowany: 2017-02-17
Re: debian/xfce4 nvidia Xorg nie działa
jawojx napisał(-a):
Jakie masz środowisko zainstalowane, a ważniejsze jaki menadżer logowania. Miałem problemy na lightdm przy nowych sterownikach nVidia.
wprawdzie mam ligtdm, ale nie sądzę żeby miało to coś wspólnego, sam Xorg nie działa (startx pomija przecież dm)
jawojx napisał(-a):
No i może ten xorg.conf sobie zapisz jako backup, a zrób taki prościutki jak tu:
https://wiki.debian.org/NvidiaGraphicsDrivers#Manual
tego próbowałem, po prostu dowolne włączenie nvidii uniemożliwia używanie Xorg
Bodzio napisał(-a):
Kernel 4.9.0-1 dla 64 bit nie buduje modułu dla nvidii. Zainstaluj kernel z aptosida - powinny skończyć się problemy.
Niedawno to przerabiałem.
spróbuję tego (cokolwiek to jest ten aptosid ;) ), poszukam przetestuje, dam znać.
dzięki za sugestie
Offline
#6 2017-02-18 14:06:30
jawojx - Użytkownik
- jawojx
- Użytkownik
- Zarejestrowany: 2012-10-11
Re: debian/xfce4 nvidia Xorg nie działa
Merle : wprawdzie mam ligtdm, ale nie sądzę żeby miało to coś wspólnego, sam Xorg nie działa (startx pomija przecież dm)
No właśnie domyślnie nie. Zrób tak jak mówię. Zainstaluj gmd3 czy kdm czy jakiś prosty jak twoje środowisko nie wymaga, przekonfiguruj, wybierz restartuj system.
Kod:
dpkg-reconfigure gdm3
Nie sprawdzałem czy ten błąd z ligtdm wysteruje na kernelu 4.9.0-8.slh.1-aptosid-amd64 zaraz to sprawdzę, ale to był błąd ligtdm/sterownik nVidia, nie kernela.
No i jest tak, na 4.9.0-8.slh.1-aptosid-amd64 działa z lightdm i 375.26-2 prawidłowo, czyli to co proponował Bodzio powinno pomóc, nie musi czytaj dalej. Zaraz sprawdzę z Kernelem z Debiana, bo ja miąłem takie same objawy.
No i na kernelu Z Debiana 4.9.0-1-amd64 z lightdm i 375.26-2, też działa. Sprawdzałem na dwóch komputerach teraz. Ale miałem identyczne problemy na kilku laptopach i musiałem zamienić lightdm.
Jak robiłem te próby teraz to jeszcze zobaczyłem czego nie napisałem. Teraz z tym głupkowatym systemd trzeba pamiętać by wyłączyć przed rekonfiguracją lightdm.
Kod:
service lightdm stop
I uruchomić gdm3. ( I tu dopiero po zatrzymaniu lightdm i przed uruchomieniem gdm3 jest możliwość startx bez lightdm na próbę).
Kod:
systemctl start gdm3.service
dopiero przekonfigurować.
Ostatnio edytowany przez jawojx (2017-02-18 15:44:57)
Offline
#7 2017-02-18 18:40:12
Merle - Nowy użytkownik
- Merle
- Nowy użytkownik
- Zarejestrowany: 2017-02-17
Re: debian/xfce4 nvidia Xorg nie działa
pierwszy test kiepsko,
przepięcie na gdm3 z włączonym driverem nVidii skutkuje miganiem ekranu i w zasadzie niemożnoscią zalogowania na konsoli, restart w single.
generalnie gdm3 nawet bez sterowników niechce działać, wywala błąd o niemożności zalogowania i can't resolve (graficznie, nie znalazłem tego w logu)
z pliczkiem minimalnym:
Kod:
Section "Device"
Identifier "GeForce GT 755M"
Driver "nvidia"
EndSectionwygląda na to że nie potrafi sobie zbudować konfiguracji X
Kod:
[ 156.042] (--) Log file renamed from "/var/lib/gdm3/.local/share/xorg/Xorg.pid-6915.log" to "/var/lib/gdm3/.local/share/xorg/Xorg.0.log"
[ 156.042]
X.Org X Server 1.19.1
Release Date: 2017-01-11
[ 156.042] X Protocol Version 11, Revision 0
[ 156.042] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[ 156.042] Current Operating System: Linux merlap 4.9.0-1-amd64 #1 SMP Debian 4.9.6-3 (2017-01-28) x86_64
[ 156.042] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-1-amd64 root=UUID=ccc56ec1-a850-4ecf-afb7-c0bb7dca489e ro quiet splash
[ 156.042] Build Date: 20 January 2017 02:50:48AM
[ 156.042] xorg-server 2:1.19.1-4 (https://www.debian.org/support)
[ 156.042] Current version of pixman: 0.34.0
[ 156.042] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 156.042] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 156.042] (==) Log file: "/var/lib/gdm3/.local/share/xorg/Xorg.0.log", Time: Sat Feb 18 16:56:11 2017
[ 156.042] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 156.042] (==) No Layout section. Using the first Screen section.
[ 156.042] (==) No screen section available. Using defaults.
[ 156.042] (**) |-->Screen "Default Screen Section" (0)
[ 156.042] (**) | |-->Monitor "<default monitor>"
[ 156.043] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 156.043] (**) | |-->Device "GeForce GT 755M"
[ 156.043] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 156.043] (==) Automatically adding devices
[ 156.043] (==) Automatically enabling devices
[ 156.043] (==) Automatically adding GPU devices
[ 156.043] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 156.043] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 156.043] Entry deleted from font path.
[ 156.043] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 156.043] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 156.043] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 156.043] (II) Loader magic: 0x557a52981e00
[ 156.043] (II) Module ABI versions:
[ 156.043] X.Org ANSI C Emulation: 0.4
[ 156.043] X.Org Video Driver: 23.0
[ 156.043] X.Org XInput driver : 24.1
[ 156.043] X.Org Server Extension : 10.0
[ 156.043] (++) using VT number 1
[ 156.045] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c120
[ 156.046] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 156.046] (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 12 paused 0
[ 156.046] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 156.047] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 13 paused 0
[ 156.048] (--) PCI:*(0:0:2:0) 8086:0416:17aa:3801 rev 6, Mem @ 0xc2000000/4194304, 0xb0000000/268435456, I/O @ 0x00005000/64, BIOS @ 0x????????/131072
[ 156.048] (--) PCI: (0:1:0:0) 10de:0fcd:17aa:3801 rev 161, Mem @ 0xc0000000/16777216, 0x90000000/268435456, 0xa0000000/33554432, I/O @ 0x00004000/128, BIOS @ 0x????????/524288
[ 156.048] (II) LoadModule: "glx"
[ 156.048] (II) Loading /usr/lib/xorg/modules/linux/libglx.so
[ 156.051] (II) Module glx: vendor="NVIDIA Corporation"
[ 156.051] compiled for 4.0.2, module version = 1.0.0
[ 156.051] Module class: X.Org Server Extension
[ 156.051] (II) NVIDIA GLX Module 375.26 Thu Dec 8 17:59:51 PST 2016
[ 156.051] (II) LoadModule: "nvidia"
[ 156.051] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 156.051] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 156.051] compiled for 4.0.2, module version = 1.0.0
[ 156.051] Module class: X.Org Video Driver
[ 156.051] (II) NVIDIA dlloader X Driver 375.26 Thu Dec 8 17:37:15 PST 2016
[ 156.051] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 156.052] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
[ 156.052] (II) systemd-logind: releasing fd for 226:1
[ 156.052] (EE) No devices detected.
[ 156.052] (EE)
Fatal server error:
[ 156.052] (EE) no screens found(EE)
[ 156.052] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 156.052] (EE) Please also check the log file at "/var/lib/gdm3/.local/share/xorg/Xorg.0.log" for additional information.
[ 156.052] (EE)
[ 156.065] (EE) Server terminated with error (1). Closing log file.czyli trzeba przetestować aptosid, ale pytanie gdzie to pobrac i jak zbudować,
znalazłem https://github.com/fullstory/linux-aptosid/tree/master/debian ale nigdy nie budowałem jądra w ten sposób,
pierwsza próba (na podstawie tego co zrozumiałem) udowodniła tylko moja niewiedzę w tej materii:
Kod:
merle@merlap:/usr/src/linux-aptosid$ fakeroot make -f debian/rules.gen binary-arch_amd64 make -f debian/rules.real binary-arch-flavour ABINAME='4.9.0-11.slh.1' ARCH='amd64' COMPILER='gcc-6' FEATURESET='none' FLAVOUR='aptosid-amd64' IMAGE_FILE='arch/x86/boot/bzImage' IMAGE_INSTALL_STEM='vmlinuz' KCONFIG='debian/config/config debian/config/amd64/config' KERNEL_ARCH='x86' LOCALVERSION='-aptosid-amd64' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-aptosid-amd64' SOURCEVERSION='4.9-18' UPSTREAMVERSION='4.9' VERSION='4.9' make[1]: Wejście do katalogu '/usr/src/linux-aptosid' rm -rf 'debian/build/build_amd64_none_aptosid-amd64' mkdir 'debian/build/build_amd64_none_aptosid-amd64' cp 'debian/build/config.amd64_none_aptosid-amd64' 'debian/build/build_amd64_none_aptosid-amd64/.config' echo 'override ARCH = x86' >> 'debian/build/build_amd64_none_aptosid-amd64/.kernelvariables' echo 'override KERNELRELEASE = 4.9.0-11.slh.1-aptosid-amd64' >> 'debian/build/build_amd64_none_aptosid-amd64/.kernelvariables' echo 'CCACHE = ccache' >> 'debian/build/build_amd64_none_aptosid-amd64/.kernelvariables' echo 'CC = $(if $(DEBIAN_KERNEL_USE_CCACHE),$(CCACHE)) $(CROSS_COMPILE)gcc-6' >> 'debian/build/build_amd64_none_aptosid-amd64/.kernelvariables' echo 'ifneq ($(DEB_BUILD_ARCH),$(DEB_HOST_ARCH))' >> 'debian/build/build_amd64_none_aptosid-amd64/.kernelvariables' echo 'override CROSS_COMPILE = $(DEB_HOST_GNU_TYPE)-' >> 'debian/build/build_amd64_none_aptosid-amd64/.kernelvariables' echo 'endif' >> 'debian/build/build_amd64_none_aptosid-amd64/.kernelvariables' env -u ABINAME -u ARCH -u FEATURESET -u FLAVOUR -u VERSION -u LOCALVERSION DISTRIBUTION_OFFICIAL_BUILD=1 DISTRIBUTOR="aptosid" DISTRIBUTION_VERSION="4.9-18" KBUILD_BUILD_TIMESTAMP="aptosid 4.9-18 (2017-02-16)" KBUILD_BUILD_USER="s.l-h" KBUILD_BUILD_HOST="gmx.de" make -C 'debian/build/source_none' O='/usr/src/linux-aptosid/debian/build/build_amd64_none_aptosid-amd64' V=1 listnewconfig make[2]: Entering directory '/usr/src/linux-aptosid' make[2]: *** No rule to make target 'listnewconfig'. Stop. make[2]: Leaving directory '/usr/src/linux-aptosid' debian/rules.real:95: polecenia dla obiektu 'debian/stamps/setup_amd64_none_aptosid-amd64' nie powiodły się make[1]: *** [debian/stamps/setup_amd64_none_aptosid-amd64] Błąd 2 make[1]: Opuszczenie katalogu '/usr/src/linux-aptosid' debian/rules.gen:7: polecenia dla obiektu 'binary-arch_amd64_none_aptosid-amd64_real' nie powiodły się make: *** [binary-arch_amd64_none_aptosid-amd64_real] Błąd 2
jakaś podpowiedź w tej materii ? czy może po prostu pobrać pakiety z tąd: http://oscar.aptosid.com/debian/pool/main/l/linux-aptosid/
Kod:
http://oscar.aptosid.com/debian/pool/main/l/linux-aptosid/linux-image-4.9.0-10.slh.1-aptosid-amd64_4.9-17_amd64.deb http://oscar.aptosid.com/debian/pool/main/l/linux-aptosid/linux-headers-4.9.0-10.slh.1-aptosid-amd64_4.9-17_amd64.deb
Offline
#8 2017-02-18 19:01:41
jawojx - Użytkownik
- jawojx
- Użytkownik
- Zarejestrowany: 2012-10-11
Re: debian/xfce4 nvidia Xorg nie działa
Lista serwerów:
http://www.aptosid.com/index.php?module=content& … iew&pid=2
Do /etc/apt/sources.list dodać, na przykład ten serwer:
Kod:
#aptosid deb http://debian.tu-bs.de/project/aptosid/debian/ sid main fix.main
Kod:
apt-get update
i instalować
Dobra chyba wiem gdzie jest problem, ja jestem ślepy, a ty pisz że masz dwie karty :), czyli pewnie jakiś laptop z optimusem. Jaki to laptop. Ślepy jestem podwójnie bo jaki laptop to jest, też było "Laptop Lenowo Ideapad Y510p".
Tu są rozwiązania dla ciebie.
https://forum.dug.net.pl/viewtopic.php?id=25537
https://wiki.debian.org/Bumblebee
https://wiki.debian.org/NvidiaGraphicsDrivers/Optim … igure_LightDM
https://wiki.archlinux.org/index.php/NVIDIA_Optimus
Przepraszam za pierwszy mylny trop, ale dobrze jest pisać na początku wpisu, a nawet w tytule o laptopie. Co nie umniejsza mojej winy i tego że nieuważnie przeczytałem watek.
Ostatnio edytowany przez jawojx (2017-02-18 21:58:49)
Offline
#9 2017-02-19 12:08:35
Merle - Nowy użytkownik
- Merle
- Nowy użytkownik
- Zarejestrowany: 2017-02-17
Re: debian/xfce4 nvidia Xorg nie działa
YES YES YES
ten ostatni link to było to, brakowało setupu ekranów dla DM
po użyciu konfiguracji LightDM z https://wiki.archlinux.org/index.php/NVIDIA_Optimus
zatrybiło
driver już był, ale nieaktywny wystarczyło dodać:
Kod:
merle@merlap:~$ cat /usr/share/X11/xorg.conf.d/20-nvidia.conf
Section "Module"
Load "modesetting"
EndSection
Section "Device"
Identifier "GeForce GT 755M"
Driver "nvidia"
BusID "PCI:1:0:0"
Option "AllowEmptyInitialConfiguration"
EndSection
Section "Device"
Identifier "intel"
Driver "modesetting"
BusID "PCI:0:2:0"
Option "AccelMethod" "sna"
#Option "TearFree" "True"
#Option "Tiling" "True"
#Option "SwapbuffersWait" "True"
EndSectioni mam wreszcie oczekiwany rezultat:
Kod:
merle@merlap:~$ glxinfo |grep version
server glx version string: 1.4
client glx version string: 1.4
GLX version: 1.4
OpenGL core profile version string: 4.5.0 NVIDIA 375.26
OpenGL core profile shading language version string: 4.50 NVIDIA
OpenGL version string: 4.5.0 NVIDIA 375.26
OpenGL shading language version string: 4.50 NVIDIA
OpenGL ES profile version string: OpenGL ES 3.2 NVIDIA 375.26
OpenGL ES profile shading language version string: OpenGL ES GLSL ES 3.20
GL_EXT_shader_implicit_conversions, GL_EXT_shader_integer_mix,pozostaje skonfigurować ekrany, ale to już detal.
Dzięki bardzo za pomocne wskazówki, będę tu częściej zaglądał, może nadaży się okazja odwdzięczyć się :)
podsumuję całość bo właśnie to robiłem na nowo w docelowej instalacji:
używam SparkyLinux i inne dystrybucje mogą się różnić (mp koniecznosc instalacji bumblebee czy tam driverów optimus)
po instalacji systemu:
nvidia-detect - pokazuje ze mam karte (no ameryki nie odkryło, taka formalnosc)
potrzebne numerki BusID
Kod:
merle@merlap:~$ lspci|grep -e VGA -e 3D 00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06) 01:00.0 VGA compatible controller: NVIDIA Corporation GK107M [GeForce GT 755M] (rev a1)
troche instalacji:
Kod:
dpkg --add-architecture i386 apt-get update apt-get install aptitude vim mc nvidia-driver
vim - bo jakos nano mi nie pasi
mc - bo wygodne
aptitude - lubie widziec
nvidia-driver - bo to nam wskazał detect
po instalacji mamy sugestie o potrzebie restartu, ale z tym poczekajmy, pierw konfiguracja.
konfiguracja lightdm:
/etc/lightdm/display_setup.sh
Kod:
#!/bin/sh xrandr --setprovideroutputsource modesetting NVIDIA-0 xrandr --auto
chmod +x /etc/lightdm/display_setup.sh
w pliku /etc/lightdm/lightdm.conf
w sekcji [Seat:*] (może być inna np: [SeatDefault])
odkomentowac linie
Kod:
#display-setup-script=
uzupelnic o parametr:
Kod:
display-setup-script=/etc/lightdm/display_setup.sh
konfiguracja xorg:
/usr/share/X11/xorg.conf.d/20-nvidia.conf - plik moze sie znajdowac w innym miejscu i miec inną nazwę, grunt zeby zawartosc była.
zawartosc powyżej, umiejscowienie może być inne
istotne parametry BusID pobieramy z wyniku lspci
i tyle, po restarcie systemu śmiga
pozdrawiam i jeszcze raz dzieki za pomoc.
Ostatnio edytowany przez Merle (2017-02-25 12:47:46)
Offline