Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!

Ogłoszenie

Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.

#1  2017-01-06 15:49:34

  Daide - Użytkownik

Daide
Użytkownik
Zarejestrowany: 2017-01-06

Problem z wykryciem adaptera wifi (TP LINK)

Dzień dobry wszystkim. Jestem świeżym windowsowym dezerterem i dopiero uczę się w linuxy. Na starcie spotkało mnie kilka dość skrajnie irytujących problemów, z którymi sobie poradziłem... poza jednym. Niesławnym problemem z instalacją adaptera TP Link. Przeszukałem pół Internetu i nawet nie to, że nie znalazłem rozwiązania, tylko go po prostu najprawdopodobniej nie zrozumiałem :( Byłby ktoś w stanie mi pomóc z jego konfiguracją? Sprawa wygląda tak: podpięty adapter do usb
a) nie wydaje żadnych sygnałów świetlnych,
b) nie jest wykrywany przez 'lsusb' (screen).

Model adaptera to TP-LINK WN821N  V5.0.

lsusb:
http://i.imgur.com/jxSHntP.png

lspci:
http://i.imgur.com/mycXGO8.png

Edit:

Przepraszam za obrazki. Jak tylko dostanę w ręce PC, to wrzucę dalsze informacje (w poniedziałek).

Ostatnio edytowany przez Daide (2017-01-06 21:21:34)

Offline

 

#2  2017-01-06 16:13:52

  Pavlo950 - człowiek pasjonat :D

Pavlo950
człowiek pasjonat :D
Zarejestrowany: 2012-02-20
Serwis

Re: Problem z wykryciem adaptera wifi (TP LINK)

dmesg po podłączeniu adaptera

Ostatnio edytowany przez Pavlo950 (2017-01-06 16:14:07)

Offline

 

#3  2017-01-06 16:16:24

  ilin - Palacz

ilin
Palacz
Skąd: PRLu
Zarejestrowany: 2006-05-03

Re: Problem z wykryciem adaptera wifi (TP LINK)

https://ubuntuforums.org/showthread.php?t=2330295

Nie dawaj obrazków tylko to co tych obrazkach jest w formie tekstowej.


Problemy rozwiązujemy na forum nie na PW -> Niech inni na tym skorzystają.
Polski portal Debiana

Offline

 

#4  2017-01-06 16:31:12

  neo86 - Lubię marudzić

neo86
Lubię marudzić
Skąd: California
Zarejestrowany: 2014-06-29

Re: Problem z wykryciem adaptera wifi (TP LINK)

Dotarłem do takiego poradnika by Twój adapter WiFi działał: http://askubuntu.com/questions/619840/rtl8192eu-driver-does-not-work natomiast tu: http://users.telenet.be/x86_64/Debian/ masz jakieś paczki DEB do instalacji. Rozkmiń to i sprawdź to. Może pomoże. Oczywiście przed wszystkimi eksperymentami polecam robić backup.

Ostatnio edytowany przez neo86 (2017-01-06 16:47:08)

Offline

 

#5  2017-01-08 17:33:43

  Daide - Użytkownik

Daide
Użytkownik
Zarejestrowany: 2017-01-06

Re: Problem z wykryciem adaptera wifi (TP LINK)

dmesg:



Kod:

[    0.000000] microcode: CPU0 microcode updated early to revision 0x4, date = 2013-06-28
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.0-57-generic (buildd@lgw01-54) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4) ) #78-Ubuntu SMP Fri Dec 9 23:50:32 UTC 2016 (Ubuntu 4.4.0-57.78-generic 4.4.35)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-57-generic root=UUID=00c0c4a2-502f-4f9a-9f48-bda2d296eb7b ro quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] x86/fpu: Using 'lazy' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000df76ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000df770000-0x00000000df787fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000df788000-0x00000000df7dbfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000df7dc000-0x00000000dfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000117ffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: System manufacturer System Product Name/P7H55D-M PRO, BIOS 1709    01/04/2011
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x118000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-DFFFF uncachable
[    0.000000]   E0000-E7FFF write-through
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 11C000000 mask FFC000000 uncachable
[    0.000000]   1 base 000000000 mask F00000000 write-back
[    0.000000]   2 base 100000000 mask FE0000000 write-back
[    0.000000]   3 base 0E0000000 mask FE0000000 uncachable
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] original variable MTRRs
[    0.000000] reg 0, base: 4544MB, range: 64MB, type UC
[    0.000000] reg 1, base: 0GB, range: 4GB, type WB
[    0.000000] reg 2, base: 4GB, range: 512MB, type WB
[    0.000000] reg 3, base: 3584MB, range: 512MB, type UC
[    0.000000] total RAM covered: 4032M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K     chunk_size: 128M     num_reg: 5      lose cover RAM: 0G
[    0.000000] New variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2GB, range: 1GB, type WB
[    0.000000] reg 2, base: 3GB, range: 512MB, type WB
[    0.000000] reg 3, base: 4GB, range: 512MB, type WB
[    0.000000] reg 4, base: 4544MB, range: 64MB, type UC
[    0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xdf770 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] BRK [0x0220a000, 0x0220afff] PGTABLE
[    0.000000] BRK [0x0220b000, 0x0220bfff] PGTABLE
[    0.000000] BRK [0x0220c000, 0x0220cfff] PGTABLE
[    0.000000] BRK [0x0220d000, 0x0220dfff] PGTABLE
[    0.000000] BRK [0x0220e000, 0x0220efff] PGTABLE
[    0.000000] BRK [0x0220f000, 0x0220ffff] PGTABLE
[    0.000000] RAMDISK: [mem 0x337fe000-0x35bf6fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FB9A0 000014 (v00 ACPIAM)
[    0.000000] ACPI: RSDT 0x00000000DF770000 000040 (v01 010411 RSDT1454 20110104 MSFT 00000097)
[    0.000000] ACPI: FACP 0x00000000DF770200 000084 (v01 010411 FACP1454 20110104 MSFT 00000097)
[    0.000000] ACPI: DSDT 0x00000000DF7704A0 00DEC4 (v01 A1589  A1589001 00000001 INTL 20060113)
[    0.000000] ACPI: FACS 0x00000000DF788000 000040
[    0.000000] ACPI: APIC 0x00000000DF770390 0000CC (v01 010411 APIC1454 20110104 MSFT 00000097)
[    0.000000] ACPI: MCFG 0x00000000DF770460 00003C (v01 010411 OEMMCFG  20110104 MSFT 00000097)
[    0.000000] ACPI: OEMB 0x00000000DF788040 000072 (v01 010411 OEMB1454 20110104 MSFT 00000097)
[    0.000000] ACPI: HPET 0x00000000DF77E370 000038 (v01 010411 OEMHPET  20110104 MSFT 00000097)
[    0.000000] ACPI: OSFR 0x00000000DF77E3B0 0000B0 (v01 010411 OEMOSFR  20110104 MSFT 00000097)
[    0.000000] ACPI: SSDT 0x00000000DF789AF0 000363 (v01 DpgPmm CpuPm    00000012 INTL 20060113)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x0000000117ffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x117ff9000-0x117ffdfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x0000000117ffffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000df76ffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x0000000117ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000117ffffff]
[    0.000000] On node 0 totalpages: 1013518
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14238 pages used for memmap
[    0.000000]   DMA32 zone: 911216 pages, LIFO batch:31
[    0.000000]   Normal zone: 1536 pages used for memmap
[    0.000000]   Normal zone: 98304 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 6, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 16 CPUs, 12 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdf770000-0xdf787fff]
[    0.000000] PM: Registered nosave memory: [mem 0xdf788000-0xdf7dbfff]
[    0.000000] PM: Registered nosave memory: [mem 0xdf7dc000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff7fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff800000-0xffffffff]
[    0.000000] e820: [mem 0xe0000000-0xfedfffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:16 nr_node_ids:1
[    0.000000] PERCPU: Embedded 33 pages/cpu @ffff880113400000 s98264 r8192 d28712 u262144
[    0.000000] pcpu-alloc: s98264 r8192 d28712 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 997659
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-57-generic root=UUID=00c0c4a2-502f-4f9a-9f48-bda2d296eb7b ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3866728K/4054072K available (8432K kernel code, 1291K rwdata, 3960K rodata, 1484K init, 1316K bss, 187344K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]     Build-time adjustment of leaf fanout to 64.
[    0.000000]     RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=16.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=16
[    0.000000] NR_IRQS:33024 nr_irqs:552 16
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 3210.234 MHz processor
[    0.000027] Calibrating delay loop (skipped), value calculated using timer frequency.. 6420.46 BogoMIPS (lpj=12840936)
[    0.000029] pid_max: default: 32768 minimum: 301
[    0.000035] ACPI: Core revision 20150930
[    0.007723] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.007744] Security Framework initialized
[    0.007746] Yama: becoming mindful.
[    0.007764] AppArmor: AppArmor initialized
[    0.007989] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.008766] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.009095] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.009100] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.009292] Initializing cgroup subsys io
[    0.009296] Initializing cgroup subsys memory
[    0.009302] Initializing cgroup subsys devices
[    0.009305] Initializing cgroup subsys freezer
[    0.009307] Initializing cgroup subsys net_cls
[    0.009308] Initializing cgroup subsys perf_event
[    0.009310] Initializing cgroup subsys net_prio
[    0.009314] Initializing cgroup subsys hugetlb
[    0.009315] Initializing cgroup subsys pids
[    0.009332] CPU: Physical Processor ID: 0
[    0.009333] CPU: Processor Core ID: 0
[    0.009337] mce: CPU supports 9 MCE banks
[    0.009346] CPU0: Thermal monitoring enabled (TM1)
[    0.009352] process: using mwait in idle threads
[    0.009355] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
[    0.009356] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.009613] Freeing SMP alternatives memory: 32K (ffffffff820b7000 - ffffffff820bf000)
[    0.033320] ftrace: allocating 32063 entries in 126 pages
[    0.045117] smpboot: APIC(0) Converting physical 0 to logical package 0
[    0.045119] smpboot: Max logical packages: 8
[    0.045126] Switched APIC routing to physical flat.
[    0.045491] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.191355] smpboot: CPU0: Intel(R) Core(TM) i5 CPU         650  @ 3.20GHz (family: 0x6, model: 0x25, stepping: 0x5)
[    0.191369] Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
[    0.191384] core: CPUID marked event: 'bus cycles' unavailable
[    0.191386] ... version:                3
[    0.191387] ... bit width:              48
[    0.191387] ... generic registers:      4
[    0.191388] ... value mask:             0000ffffffffffff
[    0.191389] ... max period:             000000007fffffff
[    0.191390] ... fixed-purpose events:   3
[    0.191390] ... event mask:             000000070000000f
[    0.192131] x86: Booting SMP configuration:
[    0.192133] .... node  #0, CPUs:        #1
[    0.192563] microcode: CPU1 microcode updated early to revision 0x4, date = 2013-06-28
[    0.194866] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.194952]   #2  #3
[    0.199709] x86: Booted up 1 node, 4 CPUs
[    0.199712] smpboot: Total of 4 processors activated (25681.87 BogoMIPS)
[    0.201884] devtmpfs: initialized
[    0.203687] evm: security.selinux
[    0.203688] evm: security.SMACK64
[    0.203689] evm: security.SMACK64EXEC
[    0.203690] evm: security.SMACK64TRANSMUTE
[    0.203690] evm: security.SMACK64MMAP
[    0.203691] evm: security.ima
[    0.203692] evm: security.capability
[    0.203754] PM: Registering ACPI NVS region [mem 0xdf788000-0xdf7dbfff] (344064 bytes)
[    0.203827] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.203903] pinctrl core: initialized pinctrl subsystem
[    0.204000] RTC time: 15:08:25, date: 01/08/17
[    0.204099] NET: Registered protocol family 16
[    0.215363] cpuidle: using governor ladder
[    0.227358] cpuidle: using governor menu
[    0.227364] PCCT header not found.
[    0.227469] ACPI: bus type PCI registered
[    0.227471] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.227530] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.227532] PCI: not using MMCONFIG
[    0.227533] PCI: Using configuration type 1 for base access
[    0.239720] ACPI: Added _OSI(Module Device)
[    0.239721] ACPI: Added _OSI(Processor Device)
[    0.239722] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.239723] ACPI: Added _OSI(Processor Aggregator Device)
[    0.241355] ACPI: Executed 1 blocks of module-level executable AML code
[    0.246585] ACPI: Dynamic OEM Table Load:
[    0.246592] ACPI: SSDT 0xFFFF88011311E000 001550 (v01 DpgPmm P001Ist  00000011 INTL 20060113)
[    0.246931] ACPI: Dynamic OEM Table Load:
[    0.246934] ACPI: SSDT 0xFFFF880112043000 0004D5 (v01 PmRef  P001Cst  00003001 INTL 20060113)
[    0.247337] ACPI: Interpreter enabled
[    0.247357] ACPI: (supports S0 S1 S3 S4 S5)
[    0.247359] ACPI: Using IOAPIC for interrupt routing
[    0.247380] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.247800] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
[    0.247808] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.252740] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.252744] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.252869] acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability]
[    0.252931] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
[    0.252933] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
[    0.252935] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
[    0.252936] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
[    0.252943] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.253132] PCI host bridge to bus 0000:00
[    0.253134] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.253136] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.253137] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.253139] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
[    0.253140] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xf7ffffff window]
[    0.253141] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfed8ffff window]
[    0.253143] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.253149] pci 0000:00:00.0: [8086:0040] type 00 class 0x060000
[    0.253168] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
[    0.253226] pci 0000:00:01.0: [8086:0041] type 01 class 0x060400
[    0.253252] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.253285] pci 0000:00:01.0: System wakeup disabled by ACPI
[    0.253332] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
[    0.253369] pci 0000:00:16.0: reg 0x10: [mem 0xf5fff000-0xf5fff00f 64bit]
[    0.253442] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.253510] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
[    0.253533] pci 0000:00:1a.0: reg 0x10: [mem 0xf5ffe000-0xf5ffe3ff]
[    0.253593] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.253629] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.253660] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
[    0.253682] pci 0000:00:1b.0: reg 0x10: [mem 0xf5ff8000-0xf5ffbfff 64bit]
[    0.253731] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.253791] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
[    0.253845] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.253880] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.253910] pci 0000:00:1c.2: [8086:3b46] type 01 class 0x060400
[    0.253957] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.253993] pci 0000:00:1c.2: System wakeup disabled by ACPI
[    0.254024] pci 0000:00:1c.3: [8086:3b48] type 01 class 0x060400
[    0.254071] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.254107] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    0.254136] pci 0000:00:1c.4: [8086:3b4a] type 01 class 0x060400
[    0.254187] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.254222] pci 0000:00:1c.4: System wakeup disabled by ACPI
[    0.254254] pci 0000:00:1c.5: [8086:3b4c] type 01 class 0x060400
[    0.254302] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.254337] pci 0000:00:1c.5: System wakeup disabled by ACPI
[    0.254370] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
[    0.254393] pci 0000:00:1d.0: reg 0x10: [mem 0xf5ffd000-0xf5ffd3ff]
[    0.254453] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.254488] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.254516] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[    0.254578] pci 0000:00:1e.0: System wakeup disabled by ACPI
[    0.254609] pci 0000:00:1f.0: [8086:3b06] type 00 class 0x060100
[    0.254747] pci 0000:00:1f.2: [8086:3b20] type 00 class 0x01018f
[    0.254763] pci 0000:00:1f.2: reg 0x10: [io  0xac00-0xac07]
[    0.254769] pci 0000:00:1f.2: reg 0x14: [io  0xa880-0xa883]
[    0.254775] pci 0000:00:1f.2: reg 0x18: [io  0xa800-0xa807]
[    0.254780] pci 0000:00:1f.2: reg 0x1c: [io  0xa480-0xa483]
[    0.254786] pci 0000:00:1f.2: reg 0x20: [io  0xa400-0xa40f]
[    0.254792] pci 0000:00:1f.2: reg 0x24: [io  0xa080-0xa08f]
[    0.254863] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
[    0.254876] pci 0000:00:1f.3: reg 0x10: [mem 0xf5ffc000-0xf5ffc0ff 64bit]
[    0.254892] pci 0000:00:1f.3: reg 0x20: [io  0x0400-0x041f]
[    0.254956] pci 0000:00:1f.5: [8086:3b26] type 00 class 0x010185
[    0.254972] pci 0000:00:1f.5: reg 0x10: [io  0xbc00-0xbc07]
[    0.254977] pci 0000:00:1f.5: reg 0x14: [io  0xb880-0xb883]
[    0.254983] pci 0000:00:1f.5: reg 0x18: [io  0xb800-0xb807]
[    0.254989] pci 0000:00:1f.5: reg 0x1c: [io  0xb480-0xb483]
[    0.254995] pci 0000:00:1f.5: reg 0x20: [io  0xb400-0xb40f]
[    0.255001] pci 0000:00:1f.5: reg 0x24: [io  0xb080-0xb08f]
[    0.255097] pci 0000:01:00.0: [10de:11c6] type 00 class 0x030000
[    0.255116] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[    0.255125] pci 0000:01:00.0: reg 0x14: [mem 0xe8000000-0xefffffff 64bit pref]
[    0.255134] pci 0000:01:00.0: reg 0x1c: [mem 0xf2000000-0xf3ffffff 64bit pref]
[    0.255140] pci 0000:01:00.0: reg 0x24: [io  0xcc00-0xcc7f]
[    0.255146] pci 0000:01:00.0: reg 0x30: [mem 0xf7e00000-0xf7e7ffff pref]
[    0.255212] pci 0000:01:00.1: [10de:0e0b] type 00 class 0x040300
[    0.255230] pci 0000:01:00.1: reg 0x10: [mem 0xf7efc000-0xf7efffff]
[    0.255323] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.255325] pci 0000:00:01.0:   bridge window [io  0xc000-0xcfff]
[    0.255327] pci 0000:00:01.0:   bridge window [mem 0xf6000000-0xf7efffff]
[    0.255330] pci 0000:00:01.0:   bridge window [mem 0xe8000000-0xf3ffffff 64bit pref]
[    0.255387] pci 0000:06:00.0: [197b:2368] type 00 class 0x010185
[    0.255428] pci 0000:06:00.0: reg 0x10: [io  0xec00-0xec07]
[    0.255440] pci 0000:06:00.0: reg 0x14: [io  0xe880-0xe883]
[    0.255452] pci 0000:06:00.0: reg 0x18: [io  0xe800-0xe807]
[    0.255464] pci 0000:06:00.0: reg 0x1c: [io  0xe480-0xe483]
[    0.255476] pci 0000:06:00.0: reg 0x20: [io  0xe400-0xe40f]
[    0.255574] pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.255582] pci 0000:00:1c.0: PCI bridge to [bus 06]
[    0.255585] pci 0000:00:1c.0:   bridge window [io  0xe000-0xefff]
[    0.255620] pci 0000:00:1c.2: PCI bridge to [bus 05]
[    0.255656] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.255705] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[    0.255739] pci 0000:03:00.0: reg 0x10: [io  0xd800-0xd8ff]
[    0.255764] pci 0000:03:00.0: reg 0x18: [mem 0xf4fff000-0xf4ffffff 64bit pref]
[    0.255779] pci 0000:03:00.0: reg 0x20: [mem 0xf4ff8000-0xf4ffbfff 64bit pref]
[    0.255789] pci 0000:03:00.0: reg 0x30: [mem 0xf7fe0000-0xf7feffff pref]
[    0.255840] pci 0000:03:00.0: supports D1 D2
[    0.255841] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.263372] pci 0000:00:1c.4: PCI bridge to [bus 03]
[    0.263378] pci 0000:00:1c.4:   bridge window [io  0xd000-0xdfff]
[    0.263384] pci 0000:00:1c.4:   bridge window [mem 0xf7f00000-0xf7ffffff]
[    0.263391] pci 0000:00:1c.4:   bridge window [mem 0xf4f00000-0xf4ffffff 64bit pref]
[    0.263454] pci 0000:00:1c.5: PCI bridge to [bus 02]
[    0.263513] pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode)
[    0.263520] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.263521] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.263522] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.263524] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
[    0.263525] pci 0000:00:1e.0:   bridge window [mem 0xe0000000-0xf7ffffff window] (subtractive decode)
[    0.263527] pci 0000:00:1e.0:   bridge window [mem 0xfc000000-0xfed8ffff window] (subtractive decode)
[    0.263957] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
[    0.263996] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[    0.264034] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 14 *15)
[    0.264073] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12 14 15)
[    0.264111] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[    0.264151] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 *14 15)
[    0.264189] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 6 7 10 11 12 14 15)
[    0.264228] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 *7 10 11 12 14 15)
[    0.264272] ACPI: Enabled 4 GPEs in block 00 to 3F
[    0.264366] vgaarb: setting as boot device: PCI:0000:01:00.0
[    0.264368] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.264369] vgaarb: loaded
[    0.264370] vgaarb: bridge control possible 0000:01:00.0
[    0.264553] SCSI subsystem initialized
[    0.264591] libata version 3.00 loaded.
[    0.264609] ACPI: bus type USB registered
[    0.264623] usbcore: registered new interface driver usbfs
[    0.264629] usbcore: registered new interface driver hub
[    0.264645] usbcore: registered new device driver usb
[    0.264764] PCI: Using ACPI for IRQ routing
[    0.265824] PCI: Discovered peer bus 3f
[    0.265825] PCI: root bus 3f: using default resources
[    0.265826] PCI: Probing PCI hardware (bus 3f)
[    0.265852] ACPI: \: failed to evaluate _DSM (0x1001)
[    0.265853] PCI host bridge to bus 0000:3f
[    0.265855] pci_bus 0000:3f: root bus resource [io  0x0000-0xffff]
[    0.265857] pci_bus 0000:3f: root bus resource [mem 0x00000000-0xfffffffff]
[    0.265858] pci_bus 0000:3f: No busn resource found for root bus, will use [bus 3f-ff]
[    0.265860] pci_bus 0000:3f: busn_res: can not insert [bus 3f-ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
[    0.265864] pci 0000:3f:00.0: [8086:2c61] type 00 class 0x060000
[    0.265899] pci 0000:3f:00.1: [8086:2d01] type 00 class 0x060000
[    0.265933] pci 0000:3f:02.0: [8086:2d10] type 00 class 0x060000
[    0.265964] pci 0000:3f:02.1: [8086:2d11] type 00 class 0x060000
[    0.265996] pci 0000:3f:02.2: [8086:2d12] type 00 class 0x060000
[    0.266028] pci 0000:3f:02.3: [8086:2d13] type 00 class 0x060000
[    0.266066] pci_bus 0000:3f: busn_res: [bus 3f-ff] end is updated to 3f
[    0.266068] pci_bus 0000:3f: busn_res: can not insert [bus 3f] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
[    0.266071] PCI: pci_cache_line_size set to 64 bytes
[    0.266114] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.266115] e820: reserve RAM buffer [mem 0xdf770000-0xdfffffff]
[    0.266214] NetLabel: Initializing
[    0.266215] NetLabel:  domain hash size = 128
[    0.266216] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.266226] NetLabel:  unlabeled traffic allowed by default
[    0.266291] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.266295] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.268307] amd_nb: Cannot enumerate AMD northbridges
[    0.268320] clocksource: Switched to clocksource hpet
[    0.273483] AppArmor: AppArmor Filesystem Enabled
[    0.273547] pnp: PnP ACPI init
[    0.273621] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
[    0.273625] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.273684] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.273824] system 00:02: [io  0x0290-0x029f] has been reserved
[    0.273827] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.273956] system 00:03: [io  0x04d0-0x04d1] has been reserved
[    0.273958] system 00:03: [io  0x0800-0x087f] could not be reserved
[    0.273959] system 00:03: [io  0x0500-0x057f] has been reserved
[    0.273961] system 00:03: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.273963] system 00:03: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.273964] system 00:03: [mem 0xfed40000-0xfed8ffff] has been reserved
[    0.273967] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.274133] pnp 00:04: [dma 0 disabled]
[    0.274180] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.274256] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.274258] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.274260] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.274328] system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.274331] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.274463] system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.274465] system 00:07: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.274466] system 00:07: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.274468] system 00:07: [mem 0x00100000-0xdfffffff] could not be reserved
[    0.274470] system 00:07: [mem 0xfed90000-0xffffffff] could not be reserved
[    0.274472] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.274565] pnp: PnP ACPI: found 8 devices
[    0.280476] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.280494] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 06] add_size 200000 add_align 100000
[    0.280496] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 06] add_size 200000 add_align 100000
[    0.280503] pci 0000:00:1c.2: bridge window [io  0x1000-0x0fff] to [bus 05] add_size 1000
[    0.280504] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05] add_size 200000 add_align 100000
[    0.280506] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff] to [bus 05] add_size 200000 add_align 100000
[    0.280512] pci 0000:00:1c.3: bridge window [io  0x1000-0x0fff] to [bus 04] add_size 1000
[    0.280514] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000
[    0.280516] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000 add_align 100000
[    0.280526] pci 0000:00:1c.5: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
[    0.280528] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[    0.280529] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000
[    0.280538] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.280540] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.280542] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.280543] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.280545] pci 0000:00:1c.2: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.280547] pci 0000:00:1c.2: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.280548] pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.280550] pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.280552] pci 0000:00:1c.3: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.280553] pci 0000:00:1c.3: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.280555] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.280557] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.280558] pci 0000:00:1c.5: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.280560] pci 0000:00:1c.5: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.280562] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.280563] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.280565] pci 0000:00:1c.2: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.280567] pci 0000:00:1c.2: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.280568] pci 0000:00:1c.3: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.280570] pci 0000:00:1c.3: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.280571] pci 0000:00:1c.5: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.280573] pci 0000:00:1c.5: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.280577] pci 0000:00:1c.0: BAR 14: assigned [mem 0xe0000000-0xe01fffff]
[    0.280581] pci 0000:00:1c.0: BAR 15: assigned [mem 0xe0200000-0xe03fffff 64bit pref]
[    0.280583] pci 0000:00:1c.2: BAR 14: assigned [mem 0xe0400000-0xe05fffff]
[    0.280586] pci 0000:00:1c.2: BAR 15: assigned [mem 0xe0600000-0xe07fffff 64bit pref]
[    0.280587] pci 0000:00:1c.3: BAR 14: assigned [mem 0xe0800000-0xe09fffff]
[    0.280590] pci 0000:00:1c.3: BAR 15: assigned [mem 0xe0a00000-0xe0bfffff 64bit pref]
[    0.280592] pci 0000:00:1c.5: BAR 14: assigned [mem 0xe0c00000-0xe0dfffff]
[    0.280595] pci 0000:00:1c.5: BAR 15: assigned [mem 0xe0e00000-0xe0ffffff 64bit pref]
[    0.280597] pci 0000:00:1c.2: BAR 13: assigned [io  0x1000-0x1fff]
[    0.280598] pci 0000:00:1c.3: BAR 13: assigned [io  0x2000-0x2fff]
[    0.280600] pci 0000:00:1c.5: BAR 13: assigned [io  0x3000-0x3fff]
[    0.280603] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.280605] pci 0000:00:01.0:   bridge window [io  0xc000-0xcfff]
[    0.280608] pci 0000:00:01.0:   bridge window [mem 0xf6000000-0xf7efffff]
[    0.280610] pci 0000:00:01.0:   bridge window [mem 0xe8000000-0xf3ffffff 64bit pref]
[    0.280612] pci 0000:00:1c.0: PCI bridge to [bus 06]
[    0.280614] pci 0000:00:1c.0:   bridge window [io  0xe000-0xefff]
[    0.280618] pci 0000:00:1c.0:   bridge window [mem 0xe0000000-0xe01fffff]
[    0.280620] pci 0000:00:1c.0:   bridge window [mem 0xe0200000-0xe03fffff 64bit pref]
[    0.280624] pci 0000:00:1c.2: PCI bridge to [bus 05]
[    0.280626] pci 0000:00:1c.2:   bridge window [io  0x1000-0x1fff]
[    0.280630] pci 0000:00:1c.2:   bridge window [mem 0xe0400000-0xe05fffff]
[    0.280632] pci 0000:00:1c.2:   bridge window [mem 0xe0600000-0xe07fffff 64bit pref]
[    0.280636] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.280638] pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
[    0.280642] pci 0000:00:1c.3:   bridge window [mem 0xe0800000-0xe09fffff]
[    0.280644] pci 0000:00:1c.3:   bridge window [mem 0xe0a00000-0xe0bfffff 64bit pref]
[    0.280649] pci 0000:00:1c.4: PCI bridge to [bus 03]
[    0.280651] pci 0000:00:1c.4:   bridge window [io  0xd000-0xdfff]
[    0.280654] pci 0000:00:1c.4:   bridge window [mem 0xf7f00000-0xf7ffffff]
[    0.280657] pci 0000:00:1c.4:   bridge window [mem 0xf4f00000-0xf4ffffff 64bit pref]
[    0.280661] pci 0000:00:1c.5: PCI bridge to [bus 02]
[    0.280663] pci 0000:00:1c.5:   bridge window [io  0x3000-0x3fff]
[    0.280666] pci 0000:00:1c.5:   bridge window [mem 0xe0c00000-0xe0dfffff]
[    0.280669] pci 0000:00:1c.5:   bridge window [mem 0xe0e00000-0xe0ffffff 64bit pref]
[    0.280673] pci 0000:00:1e.0: PCI bridge to [bus 07]
[    0.280682] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.280683] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.280684] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.280686] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.280687] pci_bus 0000:00: resource 8 [mem 0xe0000000-0xf7ffffff window]
[    0.280689] pci_bus 0000:00: resource 9 [mem 0xfc000000-0xfed8ffff window]
[    0.280690] pci_bus 0000:01: resource 0 [io  0xc000-0xcfff]
[    0.280691] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf7efffff]
[    0.280693] pci_bus 0000:01: resource 2 [mem 0xe8000000-0xf3ffffff 64bit pref]
[    0.280694] pci_bus 0000:06: resource 0 [io  0xe000-0xefff]
[    0.280696] pci_bus 0000:06: resource 1 [mem 0xe0000000-0xe01fffff]
[    0.280697] pci_bus 0000:06: resource 2 [mem 0xe0200000-0xe03fffff 64bit pref]
[    0.280698] pci_bus 0000:05: resource 0 [io  0x1000-0x1fff]
[    0.280700] pci_bus 0000:05: resource 1 [mem 0xe0400000-0xe05fffff]
[    0.280701] pci_bus 0000:05: resource 2 [mem 0xe0600000-0xe07fffff 64bit pref]
[    0.280702] pci_bus 0000:04: resource 0 [io  0x2000-0x2fff]
[    0.280704] pci_bus 0000:04: resource 1 [mem 0xe0800000-0xe09fffff]
[    0.280705] pci_bus 0000:04: resource 2 [mem 0xe0a00000-0xe0bfffff 64bit pref]
[    0.280706] pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
[    0.280708] pci_bus 0000:03: resource 1 [mem 0xf7f00000-0xf7ffffff]
[    0.280709] pci_bus 0000:03: resource 2 [mem 0xf4f00000-0xf4ffffff 64bit pref]
[    0.280710] pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
[    0.280712] pci_bus 0000:02: resource 1 [mem 0xe0c00000-0xe0dfffff]
[    0.280713] pci_bus 0000:02: resource 2 [mem 0xe0e00000-0xe0ffffff 64bit pref]
[    0.280714] pci_bus 0000:07: resource 4 [io  0x0000-0x0cf7 window]
[    0.280716] pci_bus 0000:07: resource 5 [io  0x0d00-0xffff window]
[    0.280717] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.280718] pci_bus 0000:07: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.280720] pci_bus 0000:07: resource 8 [mem 0xe0000000-0xf7ffffff window]
[    0.280721] pci_bus 0000:07: resource 9 [mem 0xfc000000-0xfed8ffff window]
[    0.280723] pci_bus 0000:3f: resource 4 [io  0x0000-0xffff]
[    0.280725] pci_bus 0000:3f: resource 5 [mem 0x00000000-0xfffffffff]
[    0.280752] NET: Registered protocol family 2
[    0.280913] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.280975] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.281048] TCP: Hash tables configured (established 32768 bind 32768)
[    0.281077] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.281089] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.281146] NET: Registered protocol family 1
[    0.281417] pci 0000:01:00.0: Video device with shadowed ROM
[    0.281434] PCI: CLS 32 bytes, default 64
[    0.281475] Trying to unpack rootfs image as initramfs...
[    0.762054] Freeing initrd memory: 36836K (ffff8800337fe000 - ffff880035bf7000)
[    0.762117] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.762119] software IO TLB [mem 0xdb770000-0xdf770000] (64MB) mapped at [ffff8800db770000-ffff8800df76ffff]
[    0.762294] Scanning for low memory corruption every 60 seconds
[    0.762734] futex hash table entries: 4096 (order: 6, 262144 bytes)
[    0.762795] audit: initializing netlink subsys (disabled)
[    0.762814] audit: type=2000 audit(1483888104.636:1): initialized
[    0.763109] Initialise system trusted keyring
[    0.763195] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.764386] zbud: loaded
[    0.764543] VFS: Disk quotas dquot_6.6.0
[    0.764575] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.764790] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.764986] fuse init (API version 7.23)
[    0.765110] Key type big_key registered
[    0.765125] Allocating IMA MOK and blacklist keyrings.
[    0.765405] Key type asymmetric registered
[    0.765409] Asymmetric key parser 'x509' registered
[    0.765442] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.765470] io scheduler noop registered
[    0.765473] io scheduler deadline registered (default)
[    0.765498] io scheduler cfq registered
[    0.765711] pcieport 0000:00:1c.0: enabling device (0105 -> 0107)
[    0.765792] pcieport 0000:00:1c.2: enabling device (0104 -> 0107)
[    0.765868] pcieport 0000:00:1c.3: enabling device (0104 -> 0107)
[    0.766015] pcieport 0000:00:1c.5: enabling device (0104 -> 0107)
[    0.766097] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.766101] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.766123] vesafb: mode is 1680x1050x32, linelength=6720, pages=0
[    0.766124] vesafb: scrolling: redraw
[    0.766126] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.766136] vesafb: framebuffer at 0xf3000000, mapped to 0xffffc90000800000, using 6912k, total 6912k
[    0.766228] Console: switching to colour frame buffer device 210x65
[    0.766263] fb0: VESA VGA frame buffer device
[    0.766275] intel_idle: MWAIT substates: 0x1120
[    0.766276] intel_idle: v0.4.1 model 0x25
[    0.766277] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.766447] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.766450] ACPI: Power Button [PWRB]
[    0.766480] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.766482] ACPI: Power Button [PWRF]
[    0.766636] GHES: HEST is not enabled!
[    0.766713] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.787085] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.788706] Linux agpgart interface v0.103
[    0.791099] brd: module loaded
[    0.792178] loop: module loaded
[    0.792340] ata_piix 0000:00:1f.2: version 2.13
[    0.792415] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    0.793032] scsi host0: ata_piix
[    0.793112] scsi host1: ata_piix
[    0.793145] ata1: SATA max UDMA/133 cmd 0xac00 ctl 0xa880 bmdma 0xa400 irq 21
[    0.793148] ata2: SATA max UDMA/133 cmd 0xa800 ctl 0xa480 bmdma 0xa408 irq 21
[    0.793215] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[    0.793823] scsi host2: ata_piix
[    0.793888] scsi host3: ata_piix
[    0.793921] ata3: SATA max UDMA/133 cmd 0xbc00 ctl 0xb880 bmdma 0xb400 irq 21
[    0.793923] ata4: SATA max UDMA/133 cmd 0xb800 ctl 0xb480 bmdma 0xb408 irq 21
[    0.794005] libphy: Fixed MDIO Bus: probed
[    0.794007] tun: Universal TUN/TAP device driver, 1.6
[    0.794008] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.794042] PPP generic driver version 2.4.2
[    0.794089] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.794094] ehci-pci: EHCI PCI platform driver
[    0.794173] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.794179] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.794189] ehci-pci 0000:00:1a.0: debug port 2
[    0.798095] ehci-pci 0000:00:1a.0: cache line size of 32 is not supported
[    0.798104] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf5ffe000
[    0.808285] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.808314] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.808316] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.808317] usb usb1: Product: EHCI Host Controller
[    0.808319] usb usb1: Manufacturer: Linux 4.4.0-57-generic ehci_hcd
[    0.808320] usb usb1: SerialNumber: 0000:00:1a.0
[    0.808613] hub 1-0:1.0: USB hub found
[    0.808631] hub 1-0:1.0: 2 ports detected
[    0.808802] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.808807] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.808816] ehci-pci 0000:00:1d.0: debug port 2
[    0.812712] ehci-pci 0000:00:1d.0: cache line size of 32 is not supported
[    0.812720] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf5ffd000
[    0.824376] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.824447] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.824452] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.824456] usb usb2: Product: EHCI Host Controller
[    0.824459] usb usb2: Manufacturer: Linux 4.4.0-57-generic ehci_hcd
[    0.824463] usb usb2: SerialNumber: 0000:00:1d.0
[    0.824775] hub 2-0:1.0: USB hub found
[    0.824792] hub 2-0:1.0: 2 ports detected
[    0.824890] ehci-platform: EHCI generic platform driver
[    0.824899] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.824904] ohci-pci: OHCI PCI platform driver
[    0.824913] ohci-platform: OHCI generic platform driver
[    0.824920] uhci_hcd: USB Universal Host Controller Interface driver
[    0.824964] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    0.827988] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.827993] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.828237] mousedev: PS/2 mouse device common for all mice
[    0.828540] rtc_cmos 00:01: RTC can wake from S4
[    0.828820] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    0.828854] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.828873] i2c /dev entries driver
[    0.828950] device-mapper: uevent: version 1.0.3
[    0.829163] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[    0.829208] ledtrig-cpu: registered to indicate activity on CPUs
[    0.830126] NET: Registered protocol family 10
[    0.830316] NET: Registered protocol family 17
[    0.830327] Key type dns_resolver registered
[    0.830498] microcode: CPU0 sig=0x20655, pf=0x2, revision=0x4
[    0.830528] microcode: CPU1 sig=0x20655, pf=0x2, revision=0x4
[    0.830533] microcode: CPU2 sig=0x20655, pf=0x2, revision=0x4
[    0.830540] microcode: CPU3 sig=0x20655, pf=0x2, revision=0x4
[    0.830571] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.830816] registered taskstats version 1
[    0.830830] Loading compiled-in X.509 certificates
[    0.831608] Loaded X.509 cert 'Build time autogenerated kernel key: a2268f7e4ca1e818c997a5071614f42c2a90855b'
[    0.831623] zswap: loaded using pool lzo/zbud
[    0.833160] Key type trusted registered
[    0.835621] Key type encrypted registered
[    0.835626] AppArmor: AppArmor sha1 policy hashing enabled
[    0.835629] ima: No TPM chip found, activating TPM-bypass!
[    0.835649] evm: HMAC attrs: 0x1
[    0.835916]   Magic number: 1:225:133
[    0.835976] acpi device:08: hash matches
[    0.836026] rtc_cmos 00:01: setting system clock to 2017-01-08 15:08:25 UTC (1483888105)
[    0.836917] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.836919] EDD information not available.
[    0.836959] PM: Hibernation image not present or could not be loaded.
[    1.120352] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.136337] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.252966] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[    1.252972] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.253500] hub 1-1:1.0: USB hub found
[    1.253723] hub 1-1:1.0: 6 ports detected
[    1.268334] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.268485] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.268806] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[    1.268812] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.269323] hub 2-1:1.0: USB hub found
[    1.269490] hub 2-1:1.0: 6 ports detected
[    1.276489] ata4.00: ATAPI: Optiarc DVD RW AD-5260S, 1.00, max UDMA/100
[    1.276792] ata3.00: ATA-8: WDC WD10EARS-00MVWB0, 51.0AB51, max UDMA/133
[    1.276799] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.284796] ata3.00: configured for UDMA/133
[    1.292471] ata4.00: configured for UDMA/100
[    1.442920] ata2.00: SATA link down (SStatus 0 SControl 300)
[    1.442931] ata2.01: SATA link down (SStatus 0 SControl 300)
[    1.453549] ata1.00: SATA link down (SStatus 0 SControl 300)
[    1.453559] ata1.01: SATA link down (SStatus 0 SControl 300)
[    1.454023] scsi 2:0:0:0: Direct-Access     ATA      WDC WD10EARS-00M AB51 PQ: 0 ANSI: 5
[    1.454594] sd 2:0:0:0: Attached scsi generic sg0 type 0
[    1.454667] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    1.454745] sd 2:0:0:0: [sda] Write Protect is off
[    1.454748] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.454760] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.456202] scsi 3:0:0:0: CD-ROM            Optiarc  DVD RW AD-5260S  1.00 PQ: 0 ANSI: 5
[    1.474187] sr 3:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[    1.474192] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.474485] sr 3:0:0:0: Attached scsi CD-ROM sr0
[    1.474606] sr 3:0:0:0: Attached scsi generic sg1 type 5
[    1.518605]  sda: sda1 sda2 < sda5 >
[    1.519371] sd 2:0:0:0: [sda] Attached SCSI disk
[    1.520562] Freeing unused kernel memory: 1484K (ffffffff81f44000 - ffffffff820b7000)
[    1.520564] Write protecting the kernel read-only data: 14336k
[    1.521220] Freeing unused kernel memory: 1796K (ffff88000183f000 - ffff880001a00000)
[    1.521573] Freeing unused kernel memory: 136K (ffff880001dde000 - ffff880001e00000)
[    1.533533] random: systemd-udevd: uninitialized urandom read (16 bytes read, 13 bits of entropy available)
[    1.533590] random: systemd-udevd: uninitialized urandom read (16 bytes read, 13 bits of entropy available)
[    1.533601] random: systemd-udevd: uninitialized urandom read (16 bytes read, 13 bits of entropy available)
[    1.533936] random: udevadm: uninitialized urandom read (16 bytes read, 13 bits of entropy available)
[    1.533973] random: udevadm: uninitialized urandom read (16 bytes read, 13 bits of entropy available)
[    1.534178] random: udevadm: uninitialized urandom read (16 bytes read, 13 bits of entropy available)
[    1.534220] random: udevadm: uninitialized urandom read (16 bytes read, 13 bits of entropy available)
[    1.534265] random: udevadm: uninitialized urandom read (16 bytes read, 13 bits of entropy available)
[    1.534305] random: udevadm: uninitialized urandom read (16 bytes read, 13 bits of entropy available)
[    1.534347] random: udevadm: uninitialized urandom read (16 bytes read, 13 bits of entropy available)
[    1.544228] usb 2-1.2: new high-speed USB device number 3 using ehci-pci
[    1.556542] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[    1.566211] scsi host4: pata_jmicron
[    1.566295] scsi host5: pata_jmicron
[    1.566341] ata5: PATA max UDMA/100 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 16
[    1.566343] ata6: PATA max UDMA/100 cmd 0xe800 ctl 0xe480 bmdma 0xe408 irq 16
[    1.570230] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.570240] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[    1.570606] r8169 0000:03:00.0 eth0: RTL8168d/8111d at 0xffffc9000076a000, f4:6d:04:ad:9a:f8, XID 083000c0 IRQ 25
[    1.570608] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.571765] [drm] Initialized drm 1.1.0 20060810
[    1.589730] wmi: Mapper loaded
[    1.617007] r8169 0000:03:00.0 enp3s0: renamed from eth0
[    1.620235] checking generic (f3000000 6c0000) vs hw (e8000000 8000000)
[    1.620238] checking generic (f3000000 6c0000) vs hw (f2000000 2000000)
[    1.620239] fb: switching to nouveaufb from VESA VGA
[    1.620268] Console: switching to colour dummy device 80x25
[    1.620389] nouveau 0000:01:00.0: NVIDIA GK106 (0e6060a1)
[    1.661274] usb 2-1.2: New USB device found, idVendor=2357, idProduct=0107
[    1.661281] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.661284] usb 2-1.2: Product: 802.11n NIC 
[    1.661286] usb 2-1.2: Manufacturer: Realtek 
[    1.661289] usb 2-1.2: SerialNumber: 00e04c000001
[    1.685425] nouveau 0000:01:00.0: bios: version 80.06.3c.00.11
[    1.686777] nouveau 0000:01:00.0: fb: 2048 MiB GDDR5
[    1.732253] usb 2-1.3: new full-speed USB device number 4 using ehci-pci
[    1.768282] tsc: Refined TSC clocksource calibration: 3209.959 MHz
[    1.768284] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e4509ddc0c, max_idle_ns: 440795294325 ns
[    1.847411] usb 2-1.3: New USB device found, idVendor=046d, idProduct=c06b
[    1.847414] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.847415] usb 2-1.3: Product: G700 Laser Mouse
[    1.847417] usb 2-1.3: Manufacturer: Logitech
[    1.847418] usb 2-1.3: SerialNumber: DF4A80FA0037
[    1.920250] usb 2-1.4: new full-speed USB device number 5 using ehci-pci
[    2.014026] usb 2-1.4: New USB device found, idVendor=09da, idProduct=f526
[    2.014029] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.014030] usb 2-1.4: Product: USB Device
[    2.014032] usb 2-1.4: Manufacturer: COMPANY
[    2.019416] hidraw: raw HID events driver (C) Jiri Kosina
[    2.045048] usbcore: registered new interface driver usbhid
[    2.045051] usbhid: USB HID core driver
[    2.046972] input: Logitech G700 Laser Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/0003:046D:C06B.0001/input/input5
[    2.048056] hid-generic 0003:046D:C06B.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech G700 Laser Mouse] on usb-0000:00:1d.0-1.3/input0
[    2.055419] input: Logitech G700 Laser Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.1/0003:046D:C06B.0002/input/input6
[    2.108432] hid-generic 0003:046D:C06B.0002: input,hiddev0,hidraw1: USB HID v1.11 Keyboard [Logitech G700 Laser Mouse] on usb-0000:00:1d.0-1.3/input1
[    2.108701] input: COMPANY USB Device as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/0003:09DA:F526.0003/input/input7
[    2.164402] hid-generic 0003:09DA:F526.0003: input,hiddev0,hidraw2: USB HID v1.11 Keyboard [COMPANY USB Device] on usb-0000:00:1d.0-1.4/input0
[    2.808136] clocksource: Switched to clocksource tsc
[    2.988390] [TTM] Zone  kernel: Available graphics memory: 1953506 kiB
[    2.988394] [TTM] Initializing pool allocator
[    2.988405] [TTM] Initializing DMA pool allocator
[    2.988429] nouveau 0000:01:00.0: DRM: VRAM: 2048 MiB
[    2.988433] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
[    2.988440] nouveau 0000:01:00.0: DRM: TMDS table version 2.0
[    2.988443] nouveau 0000:01:00.0: DRM: DCB version 4.0
[    2.988448] nouveau 0000:01:00.0: DRM: DCB outp 00: 01000f02 00020030
[    2.988452] nouveau 0000:01:00.0: DRM: DCB outp 01: 02011f80 00020030
[    2.988456] nouveau 0000:01:00.0: DRM: DCB outp 02: 08011f82 0f420030
[    2.988460] nouveau 0000:01:00.0: DRM: DCB outp 03: 02022f62 0f420010
[    2.988464] nouveau 0000:01:00.0: DRM: DCB conn 00: 00001031
[    2.988468] nouveau 0000:01:00.0: DRM: DCB conn 01: 00000100
[    2.988471] nouveau 0000:01:00.0: DRM: DCB conn 02: 00010261
[    2.992015] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.992017] [drm] Driver supports precise vblank timestamp query.
[    3.067307] nouveau 0000:01:00.0: DRM: MM: using COPY for buffer copies
[    3.188526] nouveau 0000:01:00.0: DRM: allocated 1680x1050 fb: 0x60000, bo ffff880035732800
[    3.188637] fbcon: nouveaufb (fb0) is primary device
[    3.188699] Console: switching to colour frame buffer device 210x65
[    3.188734] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[    3.200165] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0
[    4.576112] floppy0: no floppy controllers found
[    4.576127] work still pending
[    4.751504] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    5.732562] random: nonblocking pool is initialized
[    5.834040] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[    5.834145] systemd[1]: Detected architecture x86-64.
[    5.845188] systemd[1]: Set hostname to <komputercimona1>.
[    7.173348] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    7.173376] systemd[1]: Reached target Remote File Systems (Pre).
[    7.173383] systemd[1]: Reached target User and Group Name Lookups.
[    7.173453] systemd[1]: Created slice System Slice.
[    7.173480] systemd[1]: Listening on udev Kernel Socket.
[    7.173525] systemd[1]: Created slice User and Session Slice.
[    7.173534] systemd[1]: Reached target Slices.
[    7.173540] systemd[1]: Reached target Encrypted Volumes.
[    7.173557] systemd[1]: Listening on fsck to fsckd communication Socket.
[    7.173564] systemd[1]: Reached target Remote File Systems.
[    7.173587] systemd[1]: Listening on Journal Socket (/dev/log).
[    7.173634] systemd[1]: Listening on Journal Audit Socket.
[    7.173664] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    7.173698] systemd[1]: Listening on Journal Socket.
[    7.199965] systemd[1]: Starting Load Kernel Modules...
[    7.200282] systemd[1]: Started Read required files in advance.
[    7.200704] systemd[1]: Starting Set console keymap...
[    7.275862] systemd[1]: Mounting Debug File System...
[    7.276263] systemd[1]: Mounting Huge Pages File System...
[    7.276599] systemd[1]: Started Braille Device Support.
[    7.276991] systemd[1]: Mounting POSIX Message Queue File System...
[    7.277315] systemd[1]: Starting Uncomplicated firewall...
[    7.321162] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    7.321217] systemd[1]: Listening on udev Control Socket.
[    7.331964] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    7.332011] systemd[1]: Listening on Syslog Socket.
[    7.332397] systemd[1]: Starting Journal Service...
[    8.006356] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    8.015863] systemd[1]: Starting Create Static Device Nodes in /dev...
[    8.152127] lp: driver loaded but no devices found
[    8.250751] ppdev: user-space parallel port driver
[    8.350746] systemd[1]: Mounted POSIX Message Queue File System.
[    8.350788] systemd[1]: Mounted Huge Pages File System.
[    8.350808] systemd[1]: Mounted Debug File System.
[    8.357542] systemd[1]: Started Load Kernel Modules.
[    8.375860] systemd[1]: Mounting FUSE Control File System...
[    8.376278] systemd[1]: Starting Apply Kernel Variables...
[    8.378298] systemd[1]: Mounted FUSE Control File System.
[    8.721554] systemd[1]: Started Journal Service.
[    9.147919] ip_tables: (C) 2000-2006 Netfilter Core Team
[    9.214409] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    9.400694] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   10.407569] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   10.867159] systemd-journald[256]: Received request to flush runtime journal from PID 1
[   11.447624] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000084F (\PMRG) (20150930/utaddress-254)
[   11.447631] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   11.447635] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000054F (\GPS1) (20150930/utaddress-254)
[   11.447639] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   11.447641] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000054F (\GPS1) (20150930/utaddress-254)
[   11.447644] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000053F (\GPS0) (20150930/utaddress-254)
[   11.447648] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   11.447649] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000054F (\GPS1) (20150930/utaddress-254)
[   11.447652] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000053F (\GPS0) (20150930/utaddress-254)
[   11.447656] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   11.447657] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   11.875598] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   12.840141] snd_hda_intel 0000:01:00.1: Disabling MSI
[   12.840147] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[   13.028682] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[   13.028686] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   13.028689] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   13.028691] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   13.028693] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x11/0x1e
[   13.028695] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   13.028697] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[   13.028700] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[   13.028702] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[   13.041806] input: HDA Intel MID Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   13.041872] input: HDA Intel MID Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   13.041928] input: HDA Intel MID Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   13.041984] input: HDA Intel MID Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   13.042041] input: HDA Intel MID Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   13.042102] input: HDA Intel MID Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   13.042158] input: HDA Intel MID Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[   13.042216] input: HDA Intel MID Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[   13.099808] SSE version of gcm_enc/dec engaged.
[   13.311659] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
[   13.311740] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
[   13.988584] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[   14.575222] floppy0: no floppy controllers found
[   16.656856] Adding 4052988k swap on /dev/sda5.  Priority:-1 extents:1 across:4052988k FS
[   18.055929] audit: type=1400 audit(1483888122.720:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=861 comm="apparmor_parser"
[   18.055937] audit: type=1400 audit(1483888122.720:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=861 comm="apparmor_parser"
[   18.055942] audit: type=1400 audit(1483888122.720:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=861 comm="apparmor_parser"
[   18.055947] audit: type=1400 audit(1483888122.720:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=861 comm="apparmor_parser"
[   18.069745] audit: type=1400 audit(1483888122.732:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=860 comm="apparmor_parser"
[   18.069750] audit: type=1400 audit(1483888122.732:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=860 comm="apparmor_parser"
[   18.071037] audit: type=1400 audit(1483888122.736:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="webbrowser-app" pid=864 comm="apparmor_parser"
[   18.071043] audit: type=1400 audit(1483888122.736:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="webbrowser-app//oxide_helper" pid=864 comm="apparmor_parser"
[   18.121365] audit: type=1400 audit(1483888122.784:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=865 comm="apparmor_parser"
[   18.121373] audit: type=1400 audit(1483888122.784:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=865 comm="apparmor_parser"
[   31.817867] Ebtables v2.0 registered
[   32.044845] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[   33.747691] Netfilter messages via NETLINK v0.30.
[   33.819723] ip_set: protocol 6
[   36.264521] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[   36.426711] r8169 0000:03:00.0 enp3s0: link down
[   36.426712] r8169 0000:03:00.0 enp3s0: link down
[   36.426761] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[   38.610503] r8169 0000:03:00.0 enp3s0: link up
[   38.610520] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready

Offline

 

#6  2017-01-08 17:35:05

  Daide - Użytkownik

Daide
Użytkownik
Zarejestrowany: 2017-01-06

Re: Problem z wykryciem adaptera wifi (TP LINK)

Wrzucam też po kolei raporty błędów z prób (nie pamiętam, który raport do którego błędu):
>W drugiej wiadomości, bo limit znaków przekroczony<


Kod:

Build exited with failure status (Exit code 1).
To install, cd over to rtl8188ce-linux-driver and run "sudo make install"
make -C /lib/modules/4.4.0-57-generic/build M=/home/cimon/Nauka/wypakowac/rtl8188ce-linux-driver-master modules
make[1]: Wejście do katalogu '/usr/src/linux-headers-4.4.0-57-generic'
scripts/Makefile.build:44: /home/cimon/Nauka/wypakowac/rtl8188ce-linux-driver-master/Makefile: Nie ma takiego pliku ani katalogu
make[2]: *** Brak reguł do wykonania obiektu '/home/cimon/Nauka/wypakowac/rtl8188ce-linux-driver-master/Makefile'. Stop.
Makefile:1420: polecenia dla obiektu '_module_/home/cimon/Nauka/wypakowac/rtl8188ce-linux-driver-master' nie powiodły się
make[1]: *** [_module_/home/cimon/Nauka/wypakowac/rtl8188ce-linux-driver-master] Błąd 2
make[1]: Opuszczenie katalogu '/usr/src/linux-headers-4.4.0-57-generic'
Makefile:28: polecenia dla obiektu 'all' nie powiodły się
make: *** [all] Błąd 2

Kod:

sudo dpkg -i dkms_rtl8192eu_4.3.1.1.11320.20140505_all.deb 
Wybieranie wcześniej niewybranego pakietu rtl8192eu-kernel-source.
(Odczytywanie bazy danych ... 251307 plików i katalogów obecnie zainstalowanych.)
Przygotowywanie do rozpakowania pakietu dkms_rtl8192eu_4.3.1.1.11320.20140505_all.deb ...
Rozpakowywanie pakietu rtl8192eu-kernel-source (4.3.1.1.11320.20140505) ...
dpkg: problemy z zależnościami uniemożliwiają skonfigurowanie pakietu rtl8192eu-kernel-source:
 rtl8192eu-kernel-source zależy od dkms; jednakże:
  Pakiet dkms nie jest zainstalowany.
dpkg: błąd przetwarzania pakietu rtl8192eu-kernel-source (--install):
 problemy z zależnościami - pozostawianie nieskonfigurowanego
Wystąpiły błędy podczas przetwarzania:
 rtl8192eu-kernel-source

Kod:

'make' KVER=4.4.0-57-generic....(bad exit status: 2)
ERROR: Cannot create report: [Errno 17] File exists: '/var/crash/rtl8192eu-kernel-source.0.crash'
Error! Bad return status for module build on kernel: 4.4.0-57-generic (x86_64)

Kod:

Kernel preparation unnecessary for this kernel.  Skipping...
applying patch rtl8192eu-k3.13.patch...patching file include/osdep_intf.h
patching file os_dep/linux/os_intfs.c
patching file os_dep/linux/rtw_android.c
patching file os_dep/linux/rtw_proc.c
patching file os_dep/linux/usb_intf.c
Building module:
cleaning build area....
'make' KVER=4.4.0-57-generic....(bad exit status: 2)
ERROR: Cannot create report: [Errno 17] File exists: '/var/crash/rtl8192eu-kernel-source.0.crash'
Error! Bad return status for module build on kernel: 4.4.0-57-generic (x86_64)
Consult /var/lib/dkms/rtl8192eu/4.3.1.1.11320.20140505/build/make.log for more information.

Kod:

cimon@komputercimona1:~/Pobrane/driversy/rtl8192eu-linux-driver-master$ sudo make install
install -p -m 644 8192eu.ko  /lib/modules/4.4.0-57-generic/kernel/drivers/net/wireless/
/sbin/depmod -a 4.4.0-57-generic
cimon@komputercimona1:~/Pobrane/driversy/rtl8192eu-linux-driver-master$ sudo depmod -a
cimon@komputercimona1:~/Pobrane/driversy/rtl8192eu-linux-driver-master$ sudo modprobe 8182eu
modprobe: FATAL: Module 8182eu not found in directory /lib/modules/4.4.0-57-generic

^ tutaj zmieniłem modeprob na 8192 (nie wiem dlaczego, intuicja) i niby zadziałało, ale: (wybaczcie za obrazek)

http://i.imgur.com/yDeDTfR.png

Offline

 

#7  2017-01-08 19:52:02

  mati75 - Psuj

mati75
Psuj
Skąd: masz ten towar?
Zarejestrowany: 2010-03-14

Re: Problem z wykryciem adaptera wifi (TP LINK)


https://l0calh0st.pl/obrazki/userbar.png

Offline

 

#8  2017-01-08 23:17:00

  neo86 - Lubię marudzić

neo86
Lubię marudzić
Skąd: California
Zarejestrowany: 2014-06-29

Re: Problem z wykryciem adaptera wifi (TP LINK)

mati75 napisał(-a):

http://askubuntu.com/questions/619840/rtl8192eu-driver-does-not-work

Mati patrz post #4 - podałem ten sam link. Możesz założycielowi tematu pomóc jak to rozkminić.

Offline

 

#9  2017-01-09 01:51:57

  Daide - Użytkownik

Daide
Użytkownik
Zarejestrowany: 2017-01-06

Re: Problem z wykryciem adaptera wifi (TP LINK)

Kod:

Kernel preparation unnecessary for this kernel.  Skipping...
applying patch rtl8192eu-k3.13.patch...patching file include/osdep_intf.h
patching file os_dep/linux/os_intfs.c
patching file os_dep/linux/rtw_android.c
patching file os_dep/linux/rtw_proc.c
patching file os_dep/linux/usb_intf.c


Building module:
cleaning build area....
'make' KVER=4.4.0-57-generic......(bad exit status: 2)
ERROR: Cannot create report: [Errno 17] File exists: '/var/crash/rtl8192eu-kernel-source.0.crash'
Error! Bad return status for module build on kernel: 4.4.0-57-generic (x86_64)
Consult /var/lib/dkms/rtl8192eu/4.3.1.1.11320.20140505/build/make.log for more information.

Offline

 

#10  2017-01-09 07:01:17

  multim - Użytkownik

multim
Użytkownik
Zarejestrowany: 2015-08-29

Re: Problem z wykryciem adaptera wifi (TP LINK)

Gryzie się to z Twoim kernelem (4.3.1. a nie 4.4)

Offline

 

#11  2017-01-09 13:53:25

  Daide - Użytkownik

Daide
Użytkownik
Zarejestrowany: 2017-01-06

Re: Problem z wykryciem adaptera wifi (TP LINK)

Cofam głupie pytanie, przecież ja mam nowszego kernela... Macie Panowie może jakieś rozwiązanie na to? Bo ja już tracę głowę

Ostatnio edytowany przez Daide (2017-01-09 14:07:13)

Offline

 

#12  2017-01-09 15:07:29

  neo86 - Lubię marudzić

neo86
Lubię marudzić
Skąd: California
Zarejestrowany: 2014-06-29

Re: Problem z wykryciem adaptera wifi (TP LINK)

Daide napisał(-a):

Macie Panowie może jakieś rozwiązanie na to? Bo ja już tracę głowę

Nie trać głowy bo bez niej żyć się nie da.

Tu jeszcze jest jakiś poradnik ale w języku Holenderskim: https://sites.google.com/site/computertip/reserve-8 … et-0bda:818b- podobno dotyczy instalacji firmware rtl8192cu-fixes pod każde jąderko 4.x

Nie wiem mi jest trudno pomóc. Mati i Ethanak jest alfą i omegą linuksowym.

Ostatnio edytowany przez neo86 (2017-01-09 15:14:34)

Offline

 

#13  2017-01-09 22:09:41

  mati75 - Psuj

mati75
Psuj
Skąd: masz ten towar?
Zarejestrowany: 2010-03-14

Re: Problem z wykryciem adaptera wifi (TP LINK)

neo86 napisał(-a):

Mati patrz post #4 - podałem ten sam link. Możesz założycielowi tematu pomóc jak to rozkminić.

Fakt, w ostatnim poście tam jest rozwiązanie.

Kod:

sudo apt-get update
sudo apt-get install linux-generic-hwe-16.04-edge git dkms

Zresetować komputer, żeby uruchomić nowe i potem:

Kod:

git clone https://github.com/Mange/rtl8192eu-linux-driver.git
cd rtl8192eu-linux-driver
sudo dkms add .
sudo dkms install rtl8192eu/1.0

o kernelu: https://wiki.ubuntu.com/Kernel/RollingLTSEnablementStack

neo86 napisał(-a):

Mati i Ethanak jest alfą i omegą linuksowym.

Nie jestem ani alfą ani omegą, mam doświadczenie tylko i umiem właściwie użyć google.

Ostatnio edytowany przez mati75 (2017-01-09 22:13:52)


https://l0calh0st.pl/obrazki/userbar.png

Offline

 

#14  2017-01-09 23:31:27

  Daide - Użytkownik

Daide
Użytkownik
Zarejestrowany: 2017-01-06

Re: Problem z wykryciem adaptera wifi (TP LINK)

Działa. Śliczne dzięki <3

Offline

 

Stopka forum

Powered by PunBB
© Copyright 2002–2005 Rickard Andersson
Nas ludzie lubią po prostu, a nie klikając w przyciski ;-)