Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!
Ogłoszenie
Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.
Strony: 1
- Forum Debian Users Gang
- » Hardware
- » [SOLVED] Lm-sensors nie wykrywa wszystkich czujników w laptopie.
#1 2014-10-22 21:33:16
Renia - 
Użytkownik
- Renia
- Użytkownik
- Zarejestrowany: 2014-08-29
[SOLVED] Lm-sensors nie wykrywa wszystkich czujników w laptopie.
Problem polega na tym, że mimo iż ładują się wszystkie niezbędne moduły niestety lm-sensors nie podaje obrotów wentylatora (na tym zależy mi najbardziej). Sprawdzałam na kilku kernelach i dystrybucjach (Wheezy, Jessie, Sid) i sytuacja taka sama. Kilka szczegółów poniżej.
Kod:
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.17-1.slh.2-aptosid-686 ro vga=769 quiet cgroup_disable=memory acpi_enforce_resources=lax audit=0 selinux=0 cpufreq=yes LANG=pl_PL.UTF8 apparor=0 hpet=force clocksource=hpet dwc_otg.fiq_fix_enable=1 usbcore.autosuspend=-1 resume=/dev/sda6 no_console_suspend
Kod:
# sensors-detect revision 6209 (2014-01-14 22:51:58 +0100)
# System: LENOVO Lenovo [Lenovo] (laptop)
# Board: Lenovo Mariana
This program will help you determine which kernel modules you need
to load to use lm_sensors most effectively. It is generally safe
and recommended to accept the default answers to all questions,
unless you know what you're doing.
Some south bridges, CPUs or memory controllers contain embedded sensors.
Do you want to scan for them? This is totally safe. (YES/no): Silicon Integrated Systems SIS5595... No
VIA VT82C686 Integrated Sensors... No
VIA VT8231 Integrated Sensors... No
AMD K8 thermal sensors... No
AMD Family 10h thermal sensors... No
AMD Family 11h thermal sensors... No
AMD Family 12h and 14h thermal sensors... No
AMD Family 15h thermal sensors... No
AMD Family 15h power sensors... No
AMD Family 16h power sensors... No
Intel digital thermal sensor... Success!
(driver `coretemp')
Intel AMB FB-DIMM thermal sensor... No
VIA C7 thermal sensor... No
VIA Nano thermal sensor... No
Some Super I/O chips contain embedded sensors. We have to write to
standard I/O ports to probe them. This is usually safe.
Do you want to scan for Super I/O sensors? (YES/no): Probing for Super-I/O at 0x2e/0x2f
Trying family `National Semiconductor/ITE'... No
Trying family `SMSC'... No
Trying family `VIA/Winbond/Nuvoton/Fintek'... No
Trying family `ITE'... No
Probing for Super-I/O at 0x4e/0x4f
Trying family `National Semiconductor/ITE'... No
Trying family `SMSC'... No
Trying family `VIA/Winbond/Nuvoton/Fintek'... No
Trying family `ITE'... No
Some hardware monitoring chips are accessible through the ISA I/O ports.
We have to write to arbitrary I/O ports to probe them. This is usually
safe though. Yes, you do have ISA I/O ports even if you do not have any
ISA slots! Do you want to scan the ISA I/O ports? (YES/no): Probing for `National Semiconductor LM78' at 0x290... No
Probing for `National Semiconductor LM79' at 0x290... No
Probing for `Winbond W83781D' at 0x290... No
Probing for `Winbond W83782D' at 0x290... No
Lastly, we can probe the I2C/SMBus adapters for connected hardware
monitoring devices. This is the most risky part, and while it works
reasonably well on most systems, it has been reported to cause trouble
on some systems.
Do you want to probe the I2C/SMBus adapters now? (YES/no): Using driver `i2c-i801' for device 0000:00:1f.3: Intel 82801G ICH7
Next adapter: i915 gmbus ssc (i2c-0)
Do you want to scan it? (yes/NO/selectively):
Next adapter: i915 gmbus vga (i2c-1)
Do you want to scan it? (yes/NO/selectively):
Next adapter: i915 gmbus panel (i2c-2)
Do you want to scan it? (yes/NO/selectively):
Next adapter: i915 gmbus dpc (i2c-3)
Do you want to scan it? (yes/NO/selectively):
Next adapter: i915 gmbus dpb (i2c-4)
Do you want to scan it? (yes/NO/selectively):
Next adapter: i915 gmbus dpd (i2c-5)
Do you want to scan it? (yes/NO/selectively):
Next adapter: SMBus I801 adapter at 18e0 (i2c-6)
Do you want to scan it? (YES/no/selectively): Client found at address 0x4a
Probing for `National Semiconductor LM75'... No
Probing for `National Semiconductor LM75A'... No
Probing for `Dallas Semiconductor DS75'... Success!
(confidence 6, driver `lm75')
Probing for `National Semiconductor LM77'... No
Probing for `Analog Devices ADT7410/ADT7420'... No
Probing for `Analog Devices ADT7411'... No
Probing for `Maxim MAX6642'... No
Probing for `National Semiconductor LM73'... No
Probing for `National Semiconductor LM92'... No
Probing for `National Semiconductor LM76'... No
Probing for `Maxim MAX6633/MAX6634/MAX6635'... No
Probing for `NXP/Philips SA56004'... No
Client found at address 0x51
Handled by driver `eeprom' (already loaded), chip type `eeprom'
(note: this is probably NOT a sensor chip!)
Now follows a summary of the probes I have just done.
Just press ENTER to continue:
Driver `coretemp':
* Chip `Intel digital thermal sensor' (confidence: 9)
Driver `lm75':
* Bus `SMBus I801 adapter at 18e0'
Busdriver `i2c_i801', I2C address 0x4a
Chip `Dallas Semiconductor DS75' (confidence: 6)
To load everything that is needed, add this to /etc/modules:
#----cut here----
# Chip drivers
coretemp
lm75Kod:
sensors acpitz-virtual-0 Adapter: Virtual device temp1: +40.0°C (crit = +86.0°C) coretemp-isa-0000 Adapter: ISA adapter Core 0: +20.0°C (crit = +90.0°C)
Kod:
lsmod Module Size Used by md4 3285 0 nls_utf8 1024 3 cifs 325443 4 fscache 30988 1 cifs iptable_filter 996 1 ip_tables 9587 1 iptable_filter x_tables 10772 2 ip_tables,iptable_filter cdc_ether 4152 0 usbnet 17456 1 cdc_ether mii 3471 1 usbnet speedstep_lib 2895 0 i2c_dev 4327 0 tun 16906 0 hwmon_vid 2408 0 xhci_hcd 91519 0 usbhid 32145 0 hid 77115 1 usbhid btusb 17927 0 bluetooth 256991 1 btusb ums_realtek 6356 0 uas 15077 0 usb_storage 39012 2 uas,ums_realtek crc16 1027 1 bluetooth uvcvideo 64582 0 iTCO_wdt 4503 0 iTCO_vendor_support 1417 1 iTCO_wdt joydev 7531 0 videobuf2_vmalloc 2188 1 uvcvideo videobuf2_memops 1235 1 videobuf2_vmalloc videobuf2_core 20927 1 uvcvideo v4l2_common 3606 1 videobuf2_core videodev 97220 3 uvcvideo,v4l2_common,videobuf2_core media 9642 2 uvcvideo,videodev psmouse 89087 0 evdev 8524 14 ehci_pci 2988 0 uhci_hcd 20332 0 ehci_hcd 38550 1 ehci_pci serio_raw 3553 0 i2c_i801 8561 0 sg 20986 0 usbcore 143563 12 uas,btusb,uhci_hcd,uvcvideo,ums_realtek,usb_storage,ehci_hcd,ehci_pci,usbhid,usbnet,xhci_hcd,cdc_ether usb_common 1632 1 usbcore tg3 146650 0 lpc_ich 12228 0 ptp 8830 1 tg3 ideapad_laptop 9215 0 wmi 7131 0 pps_core 5560 1 ptp battery 7056 0 sparse_keymap 2518 1 ideapad_laptop intel_agp 9196 0 ac 2739 0 i915 749402 2 button 3620 1 i915 video 11041 1 i915 i2c_algo_bit 4544 1 i915 drm_kms_helper 63991 1 i915 drm 198576 4 i915,drm_kms_helper intel_gtt 10140 2 i915,intel_agp snd_seq_midi 4040 0 snd_seq_midi_event 4512 1 snd_seq_midi snd_rawmidi 15180 1 snd_seq_midi snd_seq_dummy 1095 0 snd_seq 40828 3 snd_seq_midi_event,snd_seq_dummy,snd_seq_midi snd_seq_device 4124 4 snd_seq,snd_rawmidi,snd_seq_dummy,snd_seq_midi snd_pcm_oss 34939 0 snd_mixer_oss 12123 2 snd_pcm_oss snd_hda_intel 18343 2 snd_hda_controller 15295 1 snd_hda_intel snd_hda_codec_realtek 50645 1 snd_hda_codec_generic 46583 1 snd_hda_codec_realtek snd_hda_codec 79955 4 snd_hda_codec_realtek,snd_hda_codec_generic,snd_hda_intel,snd_hda_controller snd_hwdep 4874 1 snd_hda_codec snd_pcm 65708 4 snd_pcm_oss,snd_hda_codec,snd_hda_intel,snd_hda_controller snd_timer 14686 2 snd_pcm,snd_seq snd 44378 14 snd_hda_codec_realtek,snd_pcm_oss,snd_hwdep,snd_timer,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel,snd_seq_device,snd_mixer_oss soundcore 4259 3 snd,snd_hda_codec cpufreq_powersave 674 0 cpufreq_conservative 5388 2 cpufreq_stats 2967 0 acpi_cpufreq 6103 1 processor 20998 1 acpi_cpufreq arc4 1564 2 b43 372457 0 bcma 29736 1 b43 mac80211 320773 1 b43 cfg80211 192704 2 b43,mac80211 ssb 45933 1 b43 mmc_core 81645 2 b43,ssb rfkill 12195 3 cfg80211,ideapad_laptop,bluetooth rng_core 3924 1 b43 pcmcia 30392 2 b43,ssb pcmcia_core 10163 1 pcmcia lm75 3820 0 coretemp 4804 0 fan 1941 0 cpuid 1735 0 eeprom 2212 0 fuse 72319 1 autofs4 18833 2 ext3 114839 1 mbcache 7083 1 ext3 jbd 40726 1 ext3 sd_mod 36650 3 crc_t10dif 783 1 sd_mod crct10dif_generic 1089 1 crct10dif_common 1040 2 crct10dif_generic,crc_t10dif ata_generic 2434 0 pata_acpi 2271 0 ata_piix 21339 3 libata 149222 3 pata_acpi,ata_generic,ata_piix scsi_mod 137977 5 sg,uas,usb_storage,libata,sd_mod thermal 6903 0
Kod:
filename: /lib/modules/3.17-1.slh.2-aptosid-686/kernel/drivers/i2c/busses/i2c-i801.ko
license: GPL
description: I801 SMBus driver
author: Mark D. Studebaker <mdsxyz123@yahoo.com>, Jean Delvare <jdelvare@suse.de>
srcversion: 152DE92E56A9B342093B627
alias: pci:v00008086d00002292sv*sd*bc*sc*i*
alias: pci:v00008086d00000F12sv*sd*bc*sc*i*
alias: pci:v00008086d00009CA2sv*sd*bc*sc*i*
alias: pci:v00008086d00008CA2sv*sd*bc*sc*i*
alias: pci:v00008086d000023B0sv*sd*bc*sc*i*
alias: pci:v00008086d00008D7Fsv*sd*bc*sc*i*
alias: pci:v00008086d00008D7Esv*sd*bc*sc*i*
alias: pci:v00008086d00008D7Dsv*sd*bc*sc*i*
alias: pci:v00008086d00008D22sv*sd*bc*sc*i*
alias: pci:v00008086d00001F3Csv*sd*bc*sc*i*
alias: pci:v00008086d00009C22sv*sd*bc*sc*i*
alias: pci:v00008086d00008C22sv*sd*bc*sc*i*
alias: pci:v00008086d00001E22sv*sd*bc*sc*i*
alias: pci:v00008086d00002330sv*sd*bc*sc*i*
alias: pci:v00008086d00001D72sv*sd*bc*sc*i*
alias: pci:v00008086d00001D71sv*sd*bc*sc*i*
alias: pci:v00008086d00001D70sv*sd*bc*sc*i*
alias: pci:v00008086d00001D22sv*sd*bc*sc*i*
alias: pci:v00008086d00001C22sv*sd*bc*sc*i*
alias: pci:v00008086d00003B30sv*sd*bc*sc*i*
alias: pci:v00008086d00003A60sv*sd*bc*sc*i*
alias: pci:v00008086d00003A30sv*sd*bc*sc*i*
alias: pci:v00008086d00005032sv*sd*bc*sc*i*
alias: pci:v00008086d00002930sv*sd*bc*sc*i*
alias: pci:v00008086d0000283Esv*sd*bc*sc*i*
alias: pci:v00008086d0000269Bsv*sd*bc*sc*i*
alias: pci:v00008086d000027DAsv*sd*bc*sc*i*
alias: pci:v00008086d0000266Asv*sd*bc*sc*i*
alias: pci:v00008086d000025A4sv*sd*bc*sc*i*
alias: pci:v00008086d000024D3sv*sd*bc*sc*i*
alias: pci:v00008086d000024C3sv*sd*bc*sc*i*
alias: pci:v00008086d00002483sv*sd*bc*sc*i*
alias: pci:v00008086d00002443sv*sd*bc*sc*i*
alias: pci:v00008086d00002423sv*sd*bc*sc*i*
alias: pci:v00008086d00002413sv*sd*bc*sc*i*
depends:
intree: Y
vermagic: 3.17-1.slh.2-aptosid-686 SMP preempt mod_unload modversions PENTIUMII
parm: disable_features:Disable selected driver features:
0x01 disable SMBus PEC
0x02 disable the block buffer
0x08 disable the I2C block read functionality
0x10 don't use interrupts (uint)
filename: /lib/modules/3.17-1.slh.2-aptosid-686/kernel/drivers/i2c/i2c-dev.ko
license: GPL
description: I2C /dev entries driver
author: Frodo Looijaard <frodol@dds.nl> and Simon G. Vogl <simon@tk.uni-linz.ac.at>
srcversion: 0A2052B11E8676D7A08FD4B
depends:
intree: Y
vermagic: 3.17-1.slh.2-aptosid-686 SMP preempt mod_unload modversions PENTIUMII
filename: /lib/modules/3.17-1.slh.2-aptosid-686/kernel/drivers/hwmon/lm75.ko
license: GPL
description: LM75 driver
author: Frodo Looijaard <frodol@dds.nl>
srcversion: 56661B1CEF343029FDF12FD
alias: i2c:tmp75
alias: i2c:tmp275
alias: i2c:tmp175
alias: i2c:tmp112
alias: i2c:tmp105
alias: i2c:tmp101
alias: i2c:tmp100
alias: i2c:tcn75
alias: i2c:stds75
alias: i2c:mcp980x
alias: i2c:max6626
alias: i2c:max6625
alias: i2c:lm75a
alias: i2c:lm75
alias: i2c:g751
alias: i2c:ds7505
alias: i2c:ds75
alias: i2c:ds1775
alias: i2c:adt75
depends:
intree: Y
vermagic: 3.17-1.slh.2-aptosid-686 SMP preempt mod_unload modversions PENTIUMIIKod:
-rw-r--r-- 1 root root 7640 paź 20 21:29 ac.ko -rw-r--r-- 1 root root 8844 paź 20 21:29 acpi_extlog.ko -rw-r--r-- 1 root root 9944 paź 20 21:29 acpi_ipmi.ko -rw-r--r-- 1 root root 13640 paź 20 21:29 acpi_pad.ko -rw-r--r-- 1 root root 15908 paź 20 21:29 battery.ko -rw-r--r-- 1 root root 11672 paź 20 21:29 button.ko -rw-r--r-- 1 root root 4564 paź 20 21:29 custom_method.ko -rw-r--r-- 1 root root 5804 paź 20 21:29 ec_sys.ko -rw-r--r-- 1 root root 5928 paź 20 21:29 fan.ko -rw-r--r-- 1 root root 42980 paź 20 21:29 processor.ko -rw-r--r-- 1 root root 9172 paź 20 21:29 sbshc.ko -rw-r--r-- 1 root root 11892 paź 20 21:29 sbs.ko -rw-r--r-- 1 root root 17824 paź 20 21:29 thermal.ko -rw-r--r-- 1 root root 40176 paź 20 21:29 video.ko
Kod:
Kernel version : 3.17-1.slh.2-ap20140724 - ACPI version : 20140724
-----------------------------------------------------------
Battery #1 : present
Remaining capacity : unknown, 98.89%
Design capacity : 2808 mA
Last full capacity : 1259 mA, 44.84% of design capacity
Capacity loss : 55.16%
Present rate : 0 mA
Charging state : Unknown
Battery type : Li-ion
Model number : LE30_S
AC adapter : online
Fan : <not available>
CPU type : Intel(R) Atom(TM) CPU N270 @ 1.60GHz
Min/Max frequency : 800/1600 MHz
Current frequency : 800 MHz
Frequency governor : conservative
Freq. scaling driver : acpi-cpufreq
Cache size : 800.000 KB
Bogomips : 3192.26
Bogomips : 3192.26
Function Show_CPU_Info : could not read directory /proc/acpi/processor/
Make sure your kernel has ACPI processor support enabled.
Thermal info : <not available>
Device S-state Status Sysfs node
---------------------------------------
1. HDEF S4 *disabled pci:0000:00:1b.0
2. PXS1 S4 *disabled pci:0000:02:00.0
3. PXS2 S4 *disabled
4. PXS3 S4 *disabled pci:0000:04:00.0
5. USB1 S3 *enabled pci:0000:00:1d.0
6. USB2 S3 *enabled pci:0000:00:1d.1
7. USB7 S3 *enabled pci:0000:00:1d.7Kod:
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.17-1.slh.2-aptosid-686 root=UUID=d28cdac6-a791-4673-b593-a85947a3659c ro vga=769 quiet cgroup_disable=memory acpi_enforce_resources=lax audit=0 selinux=0 cpufreq=yes LANG=pl_PL.UTF8 apparor=0 hpet=force clocksource=hpet dwc_otg.fiq_fix_enable=1 usbcore.autosuspend=-1 resume=/dev/sda6 no_console_suspend [ 0.050922] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.097452] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.097469] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 9.951375] acpi device:03: registered as cooling_device2 [ 0.000000] BIOS-e820: [mem 0x000000007f6d0000-0x000000007f6e1fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007f6e2000-0x000000007f6e2fff] ACPI NVS [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x000F7A10 000024 (v02 PTLTD ) [ 0.000000] ACPI: XSDT 0x7F6DA14F 00007C (v01 LENOVO CB-01 06040000 LTP 00000000) [ 0.000000] ACPI: FACP 0x7F6E1D4D 0000F4 (v03 INTEL CALISTGA 06040000 ALAN 00000001) [ 0.000000] ACPI: DSDT 0x7F6DB349 006990 (v01 INTEL CALISTGA 06040000 INTL 20061109) [ 0.000000] ACPI: FACS 0x7F6E2FC0 000040 [ 0.000000] ACPI: HPET 0x7F6E1E41 000038 (v01 INTEL CALISTGA 06040000 LOHR 0000005A) [ 0.000000] ACPI: MCFG 0x7F6E1E79 00003C (v01 INTEL CALISTGA 06040000 LOHR 0000005A) [ 0.000000] ACPI: TCPA 0x7F6E1EB5 000032 (v01 PTLTD CALISTGA 06040000 PTL 00000001) [ 0.000000] ACPI: TMOR 0x7F6E1EE7 000026 (v01 PTLTD 06040000 PTL 00000003) [ 0.000000] ACPI: APIC 0x7F6E1F0D 000068 (v01 PTLTD ? APIC 06040000 LTP 00000000) [ 0.000000] ACPI: BOOT 0x7F6E1F75 000028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) [ 0.000000] ACPI: ASF! 0x7F6E1F9D 000063 (v16 CETP CETP 06040000 PTL 00000001) [ 0.000000] ACPI: SSDT 0x7F6DA767 00025F (v01 PmRef Cpu0Tst 00003000 INTL 20050624) [ 0.000000] ACPI: SSDT 0x7F6DA6C1 0000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050624) [ 0.000000] ACPI: SSDT 0x7F6DA1CB 0004F6 (v02 PmRef CpuPm 00003000 INTL 20050624) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.001044] ACPI: Core revision 20140724 [ 0.012969] ACPI: All ACPI Tables successfully acquired [ 0.049307] PM: Registering ACPI NVS region [mem 0x7f6e2000-0x7f6e2fff] (4096 bytes) [ 0.050915] ACPI: bus type PCI registered [ 0.050922] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.057191] ACPI: Added _OSI(Module Device) [ 0.057199] ACPI: Added _OSI(Processor Device) [ 0.057204] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.057209] ACPI: Added _OSI(Processor Aggregator Device) [ 0.066445] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.067808] ACPI: Dynamic OEM Table Load: [ 0.067824] ACPI: SSDT 0xF5D48C00 000245 (v02 PmRef Cpu0Ist 00003000 INTL 20050624) [ 0.068776] ACPI: Dynamic OEM Table Load: [ 0.068793] ACPI: SSDT 0xF5C49000 0005E5 (v02 PmRef Cpu0Cst 00003001 INTL 20050624) [ 0.070223] ACPI: Dynamic OEM Table Load: [ 0.070236] ACPI: SSDT 0xF5C32E00 0000D4 (v02 PmRef Cpu1Ist 00003000 INTL 20050624) [ 0.071009] ACPI: Dynamic OEM Table Load: [ 0.071021] ACPI: SSDT 0xF5CD2780 000085 (v02 PmRef Cpu1Cst 00003000 INTL 20050624) [ 0.076409] ACPI: Interpreter enabled [ 0.076486] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140724/hwxface-580) [ 0.076499] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140724/hwxface-580) [ 0.076534] ACPI: (supports S0 S3 S4 S5) [ 0.076540] ACPI: Using IOAPIC for interrupt routing [ 0.077079] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.097435] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.100623] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.102306] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.102695] pci 0000:00:1d.1: System wakeup disabled by ACPI [ 0.103776] pci 0000:00:1d.7: System wakeup disabled by ACPI [ 0.104361] pci 0000:00:1f.0: can't claim BAR 13 [io 0x1000-0x107f]: address conflict with ACPI CPU throttle [io 0x1010-0x1015] [ 0.112303] pci 0000:02:00.0: System wakeup disabled by ACPI [ 0.114106] pci 0000:04:00.0: System wakeup disabled by ACPI [ 0.115292] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 0.115452] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 *3 4 5 6 7 11 12 14 15) [ 0.115613] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 *3 4 5 6 7 10 12 14 15) [ 0.115768] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 0.115925] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. [ 0.116142] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. [ 0.116298] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 *5 6 7 10 12 14 15) [ 0.116452] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14 15) [ 0.117324] ACPI: Enabled 4 GPEs in block 00 to 1F [ 0.117452] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 0.118076] PCI: Using ACPI for IRQ routing [ 0.133277] pnp: PnP ACPI init [ 0.134773] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.135443] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) [ 0.135649] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.135816] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.135921] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.136081] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.136186] pnp 00:06: Plug and Play ACPI device, IDs SYN1024 SYN1000 SYN0002 PNP0f13 (active) [ 0.136240] pnp: PnP ACPI: found 7 devices [ 0.534694] ACPI: Thermal Zone [TZ00] (35 C) [ 9.946226] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 9.955504] ACPI: Power Button [PWRB] [ 9.955813] ACPI: Sleep Button [SLPB] [ 10.057193] ACPI: Lid Switch [LID] [ 10.057554] ACPI: Power Button [PWRF] [ 10.193732] ACPI: AC Adapter [ACAD] (on-line) [ 10.460046] ACPI : EC: GPE storm detected(9 GPEs), transactions will use polling mode [ 10.528431] ACPI: Battery Slot [BAT0] (battery present) [ 10.754245] ACPI: bus type USB registered [ 11.259349] ACPI Warning: SystemIO range 0x00001028-0x0000102f conflicts with OpRegion 0x00001000-0x0000107f (\PMIO) (20140724/utaddress-258) [ 11.259373] ACPI: This conflict may cause random problems and system instability [ 11.259379] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 11.259395] ACPI Warning: SystemIO range 0x000011b0-0x000011bf conflicts with OpRegion 0x00001180-0x000011bb (\GPIO) (20140724/utaddress-258) [ 11.259410] ACPI: This conflict may cause random problems and system instability [ 11.259415] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 11.259422] ACPI Warning: SystemIO range 0x00001180-0x000011af conflicts with OpRegion 0x00001180-0x000011bb (\GPIO) (20140724/utaddress-258) [ 11.259436] ACPI: This conflict may cause random problems and system instability [ 11.259441] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 11.264085] ACPI Warning: SystemIO range 0x000018e0-0x000018ff conflicts with OpRegion 0x000018e0-0x000018ef (\_SB_.PCI0.SBUS.SMBI) (20140724/utaddress-258) [ 11.264107] ACPI: This conflict may cause random problems and system instability [ 11.264114] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Ostatnio edytowany przez Renia (2014-11-01 02:34:10)
Offline
#2 2014-10-22 22:45:52
Piotr3ks - Też człowiek :-)
- Piotr3ks
- Też człowiek :-)
- Zarejestrowany: 2007-06-24
Re: [SOLVED] Lm-sensors nie wykrywa wszystkich czujników w laptopie.
Spróbuj ręcznie załadować te moduły:
Kod:
modprobe coretemp modprobe lm75
Potem sprawdź czy widzi wszystkie cuzjniki. Jak będzie ok to:
Kod:
To load everything that is needed, add this to /etc/modules: #----cut here---- # Chip drivers coretemp lm75
Offline
#3 2014-10-22 22:53:42
Renia - Użytkownik
- Renia
- Użytkownik
- Zarejestrowany: 2014-08-29
Re: [SOLVED] Lm-sensors nie wykrywa wszystkich czujników w laptopie.
Moduły są załadowane (widać wyżej) i dodane do /etc/modules. Dotąd wypróbowałam standardowego kernela oraz aptosid i liquorix, ale rezultat taki sam - nie działa. W logach widać jakiś konflikt z ACPI, ale nie umiem sobie z tym poradzić.
Offline
#4 2014-11-01 02:28:50
Renia - Użytkownik
- Renia
- Użytkownik
- Zarejestrowany: 2014-08-29
Re: [SOLVED] Lm-sensors nie wykrywa wszystkich czujników w laptopie.
Jakoś udało się. Okazuje się, że lm-sensors jest nieprzydatny dla laptopów z serii Lenovo S9/S10/S10e, czujniki wykrywane są przez ACPI i thinkfan. Podaję rozwiązanie i przydatne informacje.
Kod:
sudo cat /etc/default/grub |grep acpi GRUB_CMDLINE_LINUX_DEFAULT="quiet splash pci_aspm=force acpi_backlight=vendor acpi=force acpi_osi=Linux acpi_enforce_resources=lax"
Kod:
sudo apt-get install thinkfan acpi-support acpi-support-base fancontrol
Kod:
sudo modprobe -rv thinkpad_acpi lm75 rmmod thinkpad_acpi rmmod nvram rmmod lm75
Kod:
sudo modprobe -v thinkpad_acpi fan_control=1 insmod /lib/modules/3.16.5-crunchbang-stable/kernel/drivers/char/nvram.ko insmod /lib/modules/3.16.5-crunchbang-stable/kernel/drivers/platform/x86/thinkpad_acpi.ko
Kod:
sensors acpitz-virtual-0 Adapter: Virtual device temp1: +61.0°C (crit = +86.0°C) coretemp-isa-0000 Adapter: ISA adapter Core 0: +41.0°C (crit = +90.0°C) thinkpad-isa-0000 Adapter: ISA adapter fan1: 1272 RPM
Kod:
sudo echo -e "\noptions thinkpad_acpi fan_control=1" >>/etc/modprobe.d/thinkpad_acpi.conf sudo echo -e "\nblacklist lm75" >>/etc/modprobe.d/lm75-blacklist.conf
Kod:
sudo cat /etc/default/thinkfan START=yes DAEMON_ARGS="-q -b 1 -s 3"
Kod:
sudo /etc/init.d/thinkfan start
Kod:
sudo pwmconfig Found the following devices: hwmon0 is acpitz hwmon1 is coretemp hwmon2/device is thinkpad Found the following PWM controls: hwmon2/device/pwm1 Giving the fans some time to reach full speed... Found the following fan sensors: hwmon2/device/fan1_input current speed: 1272 RPM
Temat do zamknięcia.
Ostatnio edytowany przez Renia (2014-11-01 04:02:25)
Offline
Strony: 1
- Forum Debian Users Gang
- » Hardware
- » [SOLVED] Lm-sensors nie wykrywa wszystkich czujników w laptopie.