Forum Debian Users Gang

bns · 2006-04-30 16:14:25

Witam

Mam problem w podlaczeniu TV (jakis Phillips ~10 lat ;P ) do karty graficznej (radeon x600 pci-express)
Obraz widac ale jest czarno bialy.
Pod windowsem mialem ten sam problem ale rozwiazaniem problemu okazalo sie kupna kabla (Hama 00041972) z odpowiednim przelacznikiem http://www.hama.de/portal/articleId*106251/action*2 … earch*0041972
po przelaczeniu pod windowsem obraz byl kolorowy pod linuksem nie ;/
jak przelaczam obraz z tv to pisze mi ze sygnal jest pal zas jak na obraz z kompa to ntsc choc w konfigu mam zeby nadawal w pal-g

nic juz nie rozmumiem z tego moze macie jakies pomysl

(debian etch, xorg-6.9)

cat /etc/X11/xorg.conf

Kod:

Section "ServerLayout"
    Identifier     "ATI Graphics Adapter 0"
    Screen      0  "aticonfig Screen 0" 0 0
    InputDevice    "Generic Keyboard"
    InputDevice    "Configured Mouse"
EndSection

Section "Files"

    # if the local font server has problems, we can fall back on these
    FontPath     "unix/:7100"
    FontPath     "/usr/lib/X11/fonts/misc"
    FontPath     "/usr/lib/X11/fonts/100dpi:unscaled"
    FontPath     "/usr/lib/X11/fonts/75dpi:unscaled"
    FontPath     "/usr/lib/X11/fonts/Type1"
    FontPath     "/usr/lib/X11/fonts/Speedo"
    FontPath     "/usr/local/share/fonts"
    FontPath     "/usr/share/fonts"
    FontPath     "/usr/X11R6/lib/X11/fonts"
    FontPath     "/usr/share/fonts/truetype"
    FontPath     "/usr/share/fonts/type1"
    FontPath     "/usr/X11R6/lib/X11/fonts/100dpi"
    FontPath     "/usr/X11R6/lib/X11/fonts/75dpi"
    FontPath     "/usr/X11R6/lib/X11/fonts/misc"
    FontPath     "/usr/X11R6/lib/X11/fonts/Speedo"
    FontPath     "/usr/X11R6/lib/X11/fonts/Type1"
EndSection

Section "Module"
    SubSection "extmod"
        Option "omit xfree86-dga"
    EndSubSection 
    Load  "GLcore"
    Load  "bitmap"
    Load  "dbe"
    Load  "ddc"
    Load  "dri"
    Load  "extmod"
    Load  "freetype"
    Load  "glx"
    Load  "int10"
    Load  "record"
    Load  "speedo"
    Load  "type1"
    Load  "vbe"
    Load  "v4l"
EndSection

Section "InputDevice"
    Identifier  "Generic Keyboard"
    Driver      "keyboard"
    Option        "CoreKeyboard"
    Option        "XkbRules" "xorg"
    Option        "XkbModel" "pc105"
    Option        "XkbLayout" "pl"
    Option        "XkbVariant" "PL"
EndSection

Section "InputDevice"
    Identifier  "Configured Mouse"
    Driver      "mouse"
    Option        "CorePointer"
    Option        "Device" "/dev/input/mice"
    Option        "Protocol" "ImPS/2"
    Option        "ZAxisMapping" "4 5"
    Option        "Emulate3Buttons"
    Option        "Emulate3Timeout" "50"
EndSection

Section "Monitor"
    Identifier   "aticonfig Monitor 0"
### Uncomment if you don't want to default to DDC:
    ModeLine     "1024x768@85" 94.5 1024 1072 1168 1376 768 769 772 808
    ModeLine     "1152x864@75" 108.0 1152 1216 1344 1600 864 865 868 900
#    HorizSync    30.0 - 69.0
#    VertRefresh  50.0 - 160.0
    Option        "DPMS"
EndSection

Section "Device"
    Identifier  "ATI Graphics Adapter 0"
    Driver        "fglrx"
    Option        "UseFBDev" "true"
#TV-out start
    Option      "NoTV" "no"
    Option        "TVFormat" "PAL-G"
    Option        "TVStandard" "EURO"
    Option        "DesktopSetup" "0x00000100"
    Option        "TVHSizeAdj" "-2"
    Option        "TVVSizeAdj" "2"
    Option        "TVHPosAdj" "0"
    Option        "TVVPosAdj" "0"
    Option        "TVHStartAdj" "0"
    Option        "TVColorAdj" "0"
    Option        "GammaCorrectionI" "0x06419064"
    Option        "GammaCorrectionII" "0x06419064"
#TV-out end
    BusID        "PCI:4:0:0"
    Option        "backingstore" "true"
    Option        "RenderAccel" "true"
    Option        "AllowGLXWithComposite" "true"
    Option        "VideoOverlay" "on"
    Option        "OpenGLOverlay" "off"
    Option        "UseInternalAGPGART" "no"
EndSection

Section "Screen"
    Identifier "aticonfig Screen 0"
    Device     "ATI Graphics Adapter 0"
    Monitor    "aticonfig Monitor 0"
    DefaultDepth     24
    SubSection "Display"
        Viewport   0 0
        Depth     24
        Modes    "1152x864" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
        Depth     16
        Modes    "1152x864" "1024x768" "800x600"
    EndSubSection
    SubSection "Display"
        Depth     24
        Modes    "1152x864" "1024x768" "800x600"
    EndSubSection
EndSection

Section "DRI"
    Mode         0666
EndSection

terefere · 2006-04-30 16:59:16

W polsce głównymi standardami są PAL-BG bądź też PAL-DK może na którymś z tych pójdzie

bns · 2006-04-30 18:40:12

ustawialem PAL-D, PAL-G nawet PAL-SCART i nic

zaintersowalem sie opcja aticonfig

Kod:

aticonfig --initial=dual-head

porobil mi w /etc/X11/xorg.conf po dwie sekcje, np.

Kod:

Section "Monitor"

### Uncomment if you don't want to default to DDC:
        Identifier   "aticonfig Monitor 0"
        ModeLine     "1024x768@85" 94.5 1024 1072 1168 1376 768 769 772 808
        ModeLine     "1152x864@75" 108.0 1152 1216 1344 1600 864 865 868 900
        Option      "DPMS"
EndSection

Section "Monitor"
        Identifier   "aticonfig Monitor 1"
EndSection

czyli mam rozumiec teraz jedna od monitora a druga od tv i wystarczy pokonfigurowac?

teraz pytanie do tych co maja tv podlaczony do kompa moze podadza swoj xorg.conf dla porownania ;)

Forum Debian Users Gang

Ogłoszenie

#1 2006-04-30 16:14:25

bns - unknown

Czarno bialy obraz na tv

Kod:

#2 2006-04-30 16:59:16

terefere - Członek DUG

Re: Czarno bialy obraz na tv

#3 2006-04-30 18:40:12

bns - unknown

Re: Czarno bialy obraz na tv

Kod:

Kod:

Stopka forum