Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!

Ogłoszenie

Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.

Strony: 1 2 ▶

 

#1  2014-03-22 21:33:35

  Arristo - Użytkownik

Arristo
Użytkownik
Skąd: Zielona Góra
Zarejestrowany: 2014-02-20

Dziwny plik

W systemie utworzył mi się plik "zombi" /var/lib/dpkg/lock i spowalnia mi start systemu. Wyskakuje mi komunikat

Kod:

Specified filename /var/lib/dpkg/lock is not a mountpoint

i system się "zastanawia" co z tym fantem zrobić. Próbowałem go wykasować ale jest wciąż odtwarzany. Jest to plik pusty od samego początku. Szukając odpowiedzi w internecie próbowałem

Kod:

 apt-get install -f

i

Kod:

dpkg --configure -a

ale nic to nie daje - pasożyt nadal egzystuje.Powstał on przy nieudanej instalacji paczki pobranej z internetu google-chrome-stable_current_i386.deb


Proszę o pomoc :)

Ostatnio edytowany przez Arristo (2014-03-22 21:38:50)

Offline

 

#2  2014-03-22 21:41:32

  ArnVaker - Kapelusznik

ArnVaker
Kapelusznik
Skąd: Midgard
Zarejestrowany: 2009-05-06

Re: Dziwny plik

Obecność pliku /var/lib/dpkg/lock jest całkowicie normalna. Komunikat mówi, że nie jest on punktem montowania; istotnie – nie jest, ale też nie powinien być.

Offline

 

#3  2014-03-22 21:56:44

  Arristo - Użytkownik

Arristo
Użytkownik
Skąd: Zielona Góra
Zarejestrowany: 2014-02-20

Re: Dziwny plik

Jaką więc rolę on spełnia w systemie i czemu spowalnia jego start?

Nie spotkałem się dotychczas z takim plikiem, a Debiana używam od niedawna.

Ostatnio edytowany przez Arristo (2014-03-22 21:58:09)

Offline

 

#4  2014-03-22 22:14:54

  menel - Użytkownik

menel
Użytkownik
Zarejestrowany: 2013-11-02

Re: Dziwny plik

Kod:

root@shodan:/var/lib/dpkg# ls
alternatives   cmethopt        info   statoverride      status-old
available      diversions      lock   statoverride-old  triggers
available-old  diversions-old  parts  status            updates
root@shodan:/var/lib/dpkg# cat lock
root@shodan:/var/lib/dpkg#

Offline

 

#5  2014-03-22 22:17:43

  ArnVaker - Kapelusznik

ArnVaker
Kapelusznik
Skąd: Midgard
Zarejestrowany: 2009-05-06

Re: Dziwny plik

Arristo napisał(-a):

Jaką więc rolę on spełnia w systemie

Zapobiega jednoczesnemu wywołaniu więcej niż jednej instancji dpkg.

Arristo napisał(-a):

i czemu spowalnia jego start?

To raczej nie wina pliku, a czegoś co się odwołuje do niego jako punktu montowania.

EDIT: Może ma to związek z tym bugiem: #740275.

Offline

 

#6  2014-03-23 09:17:51

  Arristo - Użytkownik

Arristo
Użytkownik
Skąd: Zielona Góra
Zarejestrowany: 2014-02-20

Re: Dziwny plik

Kod:

# ls /var/lib/dpkg/
alternatives  available-old  diversions      info  parts         statoverride-old  status-old  updates
available     cmethopt       diversions-old  lock  statoverride  status            triggers

Kod:

root@Lap200314:/home/wojtek# cat /var/lib/dpkg/lock 
root@Lap200314:/home/wojtek#

ten plik jest pusty, a ja używam Debiana jessie.

ArnVaker napisał(-a):

To raczej nie wina pliku, a czegoś co się odwołuje do niego jako punktu montowania.

EDIT: Może ma to związek z tym bugiem: #740275.

Przeczytałem tego "buga" ;) ale nie bardzo wiem jakie to ma odniesienie do mojej sytuacji. Mam wrażenie, że to dotyczy innego problemu, chociaż podobnego.

Skąd się wziął u mnie ten "nie punkt" ;) montowania i jak się go pozbyć?

Offline

 

#7  2014-03-23 09:47:21

  ilin - Palacz

ilin
Palacz
Skąd: PRLu
Zarejestrowany: 2006-05-03

Re: Dziwny plik

Zobacz do /var/log/dmesg   może coś będzie tam w tym temacie.

Problemy rozwiązujemy na forum nie na PW -> Niech inni na tym skorzystają.
Polski portal Debiana

Offline

 

#8  2014-03-23 10:08:32

  Arristo - Użytkownik

Arristo
Użytkownik
Skąd: Zielona Góra
Zarejestrowany: 2014-02-20

Re: Dziwny plik

ilin napisał(-a):

Zobacz do /var/log/dmesg   może coś będzie tam w tym temacie.

Kod:

~$ ls /var/log/|grep dmesg
dmesg
dmesg.0
dmesg.1.gz
dmesg.2.gz
dmesg.3.gz
dmesg.4.gz

A tutaj się trochę zagubiłem:

Kod:

# cat /var/log/dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.13-1-686-pae (debian-kernel@lists.debian.org) (gcc version 4.8.2 (Debian 4.8.2-14) ) #1 SMP Debian 3.13.5-1 (2014-03-04)
[    0.000000] Disabled fast string operations
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003f575fff] usable
[    0.000000] BIOS-e820: [mem 0x000000003f576000-0x000000003f5befff] reserved
[    0.000000] BIOS-e820: [mem 0x000000003f5bf000-0x000000003f66cfff] usable
[    0.000000] BIOS-e820: [mem 0x000000003f66d000-0x000000003f6befff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000003f6bf000-0x000000003f6edfff] usable
[    0.000000] BIOS-e820: [mem 0x000000003f6ee000-0x000000003f6fefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000003f6ff000-0x000000003f6fffff] usable
[    0.000000] BIOS-e820: [mem 0x000000003f700000-0x000000003fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed14000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI: eMachines  eM250           /eM250           , BIOS V1.25 11/28/2009
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x3f700 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-C7FFF write-protect
[    0.000000]   C8000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0FFF00000 mask 0FFF00000 write-protect
[    0.000000]   1 base 0FFFC0000 mask 0FFFE0000 uncachable
[    0.000000]   2 base 000000000 mask 0E0000000 write-back
[    0.000000]   3 base 020000000 mask 0E0000000 write-back
[    0.000000]   4 base 03F800000 mask 0FF800000 uncachable
[    0.000000]   5 base 03F700000 mask 0FFF00000 uncachable
[    0.000000]   6 disabled
[    0.000000]   7 base 000000000 mask 0FFFE0000 uncachable
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x37600000-0x377fffff]
[    0.000000]  [mem 0x37600000-0x377fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x34000000-0x375fffff]
[    0.000000]  [mem 0x34000000-0x375fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x33ffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x33ffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x37800000-0x379fdfff]
[    0.000000]  [mem 0x37800000-0x379fdfff] page 4k
[    0.000000] BRK [0x016e4000, 0x016e4fff] PGTABLE
[    0.000000] BRK [0x016e5000, 0x016e6fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x36646000-0x3731afff]
[    0.000000] ACPI: RSDP 000fe020 000024 (v02 ACRSYS)
[    0.000000] ACPI: XSDT 3f6fe120 000064 (v01 ACRSYS ACRPRDCT 00000001      01000013)
[    0.000000] ACPI: FACP 3f6fc000 0000F4 (v04 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: DSDT 3f6f0000 00710E (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: FACS 3f688000 000040
[    0.000000] ACPI: SSDT 3f6fd000 0004C4 (v02  PmRef    CpuPm 00003000 INTL 20051117)
[    0.000000] ACPI: HPET 3f6fb000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: APIC 3f6fa000 000068 (v02 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: MCFG 3f6f9000 00003C (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: ASF! 3f6f8000 0000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: SLIC 3f6ef000 000176 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: BOOT 3f6ee000 000028 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 125MB HIGHMEM available.
[    0.000000] 889MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 379fe000
[    0.000000]   low ram: 0 - 379fe000
[    0.000000] BRK [0x016e7000, 0x016e7fff] PGTABLE
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   Normal   [mem 0x01000000-0x379fdfff]
[    0.000000]   HighMem  [mem 0x379fe000-0x3f6fffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0x3f575fff]
[    0.000000]   node   0: [mem 0x3f5bf000-0x3f66cfff]
[    0.000000]   node   0: [mem 0x3f6bf000-0x3f6edfff]
[    0.000000]   node   0: [mem 0x3f6ff000-0x3f6fffff]
[    0.000000] On node 0 totalpages: 259570
[    0.000000] free_area_init_node: node 0, pgdat c15ab880, node_mem_map f5e56020
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   Normal zone: 1748 pages used for memmap
[    0.000000]   Normal zone: 223742 pages, LIFO batch:31
[    0.000000]   HighMem zone: 251 pages used for memmap
[    0.000000]   HighMem zone: 31830 pages, LIFO batch:7
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] e820: [mem 0x40000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @f79db000 s35520 r0 d21824 u57344
[    0.000000] pcpu-alloc: s35520 r0 d21824 u57344 alloc=14*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 257790
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.13-1-686-pae root=/dev/mapper/Lap200314--vg-root ro quiet
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (000379fe:0003f700)
[    0.000000] Memory: 1008936K/1038280K available (4188K kernel code, 379K rwdata, 1280K rodata, 532K init, 588K bss, 29344K reserved, 127320K highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xffd35000 - 0xfffff000   (2856 kB)
[    0.000000]     pkmap   : 0xffa00000 - 0xffc00000   (2048 kB)
[    0.000000]     vmalloc : 0xf81fe000 - 0xff9fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf79fe000   ( 889 MB)
[    0.000000]       .init : 0xc15b8000 - 0xc163d000   ( 532 kB)
[    0.000000]       .data : 0xc14174ca - 0xc15b7e80   (1666 kB)
[    0.000000]       .text : 0xc1000000 - 0xc14174ca   (4189 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000]  RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=2.
[    0.000000] NR_IRQS:2304 nr_irqs:512 16
[    0.000000] CPU 0 irqstacks, hard=f7406000 soft=f7408000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1596.140 MHz processor
[    0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.28 BogoMIPS (lpj=6384560)
[    0.004013] pid_max: default: 32768 minimum: 301
[    0.004085] Security Framework initialized
[    0.004095] AppArmor: AppArmor disabled by boot time parameter
[    0.004099] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.004133] Mount-cache hash table entries: 512
[    0.004555] Initializing cgroup subsys memory
[    0.004570] Initializing cgroup subsys devices
[    0.004576] Initializing cgroup subsys freezer
[    0.004581] Initializing cgroup subsys blkio
[    0.004586] Initializing cgroup subsys perf_event
[    0.004632] Disabled fast string operations
[    0.004641] CPU: Physical Processor ID: 0
[    0.004645] CPU: Processor Core ID: 0
[    0.004651] mce: CPU supports 5 MCE banks
[    0.004664] CPU0: Thermal monitoring enabled (TM2)
[    0.004690] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 0
[    0.004690] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8
[    0.004690] tlb_flushall_shift: 6
[    0.004852] Freeing SMP alternatives memory: 20K (c163d000 - c1642000)
[    0.009089] ACPI: Core revision 20131115
[    0.018217] ACPI: All ACPI Tables successfully acquired
[    0.020164] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.020665] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.063532] smpboot: CPU0: Intel(R) Atom(TM) CPU N270   @ 1.60GHz (fam: 06, model: 1c, stepping: 02)
[    0.064000] Performance Events: PEBS fmt0+, LBR disabled due to erratumAtom events, Intel PMU driver.
[    0.064000] ... version:                3
[    0.064000] ... bit width:              40
[    0.064000] ... generic registers:      2
[    0.064000] ... value mask:             000000ffffffffff
[    0.064000] ... max period:             000000007fffffff
[    0.064000] ... fixed-purpose events:   3
[    0.064000] ... event mask:             0000000700000003
[    0.064000] CPU 1 irqstacks, hard=f74ca000 soft=f74cc000
[    0.064000] x86: Booting SMP configuration:
[    0.008000] Initializing CPU#1
[    0.008000] Disabled fast string operations
[    0.064000] .... node  #0, CPUs:      #1
[    0.074124] x86: Booted up 1 node, 2 CPUs
[    0.074136] smpboot: Total of 2 processors activated (6384.56 BogoMIPS)
[    0.074396] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.075026] devtmpfs: initialized
[    0.075026] PM: Registering ACPI NVS region [mem 0x3f66d000-0x3f6befff] (335872 bytes)
[    0.075026] NET: Registered protocol family 16
[    0.075026] cpuidle: using governor ladder
[    0.075026] cpuidle: using governor menu
[    0.075026] ACPI: bus type PCI registered
[    0.075026] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.075026] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.075026] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.075026] PCI: Using MMCONFIG for extended config space
[    0.075026] PCI: Using configuration type 1 for base access
[    0.076347] bio: create slab <bio-0> at 0
[    0.076347] ACPI: Added _OSI(Module Device)
[    0.076347] ACPI: Added _OSI(Processor Device)
[    0.076347] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.076347] ACPI: Added _OSI(Processor Aggregator Device)
[    0.085255] ACPI: Executed 1 blocks of module-level executable AML code
[    0.088879] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.089853] ACPI: SSDT 3f5b7c90 000239 (v02  PmRef  Cpu0Ist 00003000 INTL 20051117)
[    0.090621] ACPI: Dynamic OEM Table Load:
[    0.090628] ACPI: SSDT   (null) 000239 (v02  PmRef  Cpu0Ist 00003000 INTL 20051117)
[    0.090841] ACPI: SSDT 3f5b6e10 0001C7 (v02  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    0.091559] ACPI: Dynamic OEM Table Load:
[    0.091565] ACPI: SSDT   (null) 0001C7 (v02  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    0.112526] ACPI: SSDT 3f5b7f10 0000D0 (v02  PmRef  Cpu1Ist 00003000 INTL 20051117)
[    0.113269] ACPI: Dynamic OEM Table Load:
[    0.113276] ACPI: SSDT   (null) 0000D0 (v02  PmRef  Cpu1Ist 00003000 INTL 20051117)
[    0.113464] ACPI: SSDT 3f5b5f10 000083 (v02  PmRef  Cpu1Cst 00003000 INTL 20051117)
[    0.114189] ACPI: Dynamic OEM Table Load:
[    0.114195] ACPI: SSDT   (null) 000083 (v02  PmRef  Cpu1Cst 00003000 INTL 20051117)
[    0.136728] ACPI: Interpreter enabled
[    0.136748] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
[    0.136760] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[    0.136796] ACPI: (supports S0 S3 S4 S5)
[    0.136801] ACPI: Using IOAPIC for interrupt routing
[    0.136874] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.137240] ACPI: No dock devices found.
[    0.365413] ACPI: Power Resource [FN00] (on)
[    0.367074] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.367093] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.367242] ACPI Error: [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS (20131115/dsfield-211)
[    0.367257] ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node f744e698), AE_ALREADY_EXISTS (20131115/psparse-536)
[    0.367273] ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error
[    0.367289] acpi PNP0A08:00: _OSC failed (AE_ALREADY_EXISTS); disabling ASPM
[    0.369272] PCI host bridge to bus 0000:00
[    0.369283] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.369290] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.369296] pci_bus 0000:00: root bus resource [io  0x0d00-0xefff]
[    0.369303] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.369309] pci_bus 0000:00: root bus resource [mem 0x40000000-0xfebfffff]
[    0.369333] pci 0000:00:00.0: [8086:27ac] type 00 class 0x060000
[    0.369559] pci 0000:00:02.0: [8086:27ae] type 00 class 0x030000
[    0.369581] pci 0000:00:02.0: reg 0x10: [mem 0x58280000-0x582fffff]
[    0.369593] pci 0000:00:02.0: reg 0x14: [io  0x60f0-0x60f7]
[    0.369605] pci 0000:00:02.0: reg 0x18: [mem 0x40000000-0x4fffffff pref]
[    0.369616] pci 0000:00:02.0: reg 0x1c: [mem 0x58300000-0x5833ffff]
[    0.369824] pci 0000:00:02.1: [8086:27a6] type 00 class 0x038000
[    0.369842] pci 0000:00:02.1: reg 0x10: [mem 0x58200000-0x5827ffff]
[    0.370121] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[    0.370153] pci 0000:00:1b.0: reg 0x10: [mem 0x58340000-0x58343fff 64bit]
[    0.370272] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.370405] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.370501] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[    0.370628] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.370754] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.370853] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
[    0.370969] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.371096] pci 0000:00:1c.1: System wakeup disabled by ACPI
[    0.371193] pci 0000:00:1c.2: [8086:27d4] type 01 class 0x060400
[    0.371318] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.371445] pci 0000:00:1c.2: System wakeup disabled by ACPI
[    0.371543] pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400
[    0.371660] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.371786] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    0.371881] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[    0.371949] pci 0000:00:1d.0: reg 0x20: [io  0x60a0-0x60bf]
[    0.372153] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.372249] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[    0.372316] pci 0000:00:1d.1: reg 0x20: [io  0x6080-0x609f]
[    0.372505] pci 0000:00:1d.1: System wakeup disabled by ACPI
[    0.372598] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[    0.372666] pci 0000:00:1d.2: reg 0x20: [io  0x6060-0x607f]
[    0.372854] pci 0000:00:1d.2: System wakeup disabled by ACPI
[    0.372946] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[    0.373014] pci 0000:00:1d.3: reg 0x20: [io  0x6040-0x605f]
[    0.373201] pci 0000:00:1d.3: System wakeup disabled by ACPI
[    0.373310] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[    0.373343] pci 0000:00:1d.7: reg 0x10: [mem 0x58344400-0x583447ff]
[    0.373464] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.373665] pci 0000:00:1d.7: System wakeup disabled by ACPI
[    0.373767] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.374036] pci 0000:00:1f.0: [8086:27b9] type 00 class 0x060100
[    0.374170] pci 0000:00:1f.0: address space collision: [io  0x0400-0x047f] conflicts with ACPI CPU throttle [??? 0x00000410-0x00000415 flags 0x80000000]
[    0.374182] pci 0000:00:1f.0: quirk: [io  0x0500-0x053f] claimed by ICH6 GPIO
[    0.374192] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at ff2c (mask 0003)
[    0.374201] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0068 (mask 0007)
[    0.374437] pci 0000:00:1f.2: [8086:27c5] type 00 class 0x010601
[    0.374470] pci 0000:00:1f.2: reg 0x10: [io  0x60d8-0x60df]
[    0.374488] pci 0000:00:1f.2: reg 0x14: [io  0x60fc-0x60ff]
[    0.374505] pci 0000:00:1f.2: reg 0x18: [io  0x60d0-0x60d7]
[    0.374523] pci 0000:00:1f.2: reg 0x1c: [io  0x60f8-0x60fb]
[    0.374540] pci 0000:00:1f.2: reg 0x20: [io  0x6020-0x602f]
[    0.374557] pci 0000:00:1f.2: reg 0x24: [mem 0x58344000-0x583443ff]
[    0.374626] pci 0000:00:1f.2: PME# supported from D3hot
[    0.374825] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[    0.374909] pci 0000:00:1f.3: reg 0x20: [io  0x6000-0x601f]
[    0.375326] acpiphp: Slot [1] registered
[    0.375436] pci 0000:01:00.0: [168c:002b] type 00 class 0x028000
[    0.375477] pci 0000:01:00.0: reg 0x10: [mem 0x57100000-0x5710ffff 64bit]
[    0.375640] pci 0000:01:00.0: supports D1
[    0.375647] pci 0000:01:00.0: PME# supported from D0 D1 D3hot
[    0.380036] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.380047] pci 0000:00:1c.0:   bridge window [io  0x5000-0x5fff]
[    0.380057] pci 0000:00:1c.0:   bridge window [mem 0x57100000-0x581fffff]
[    0.380070] pci 0000:00:1c.0:   bridge window [mem 0x50000000-0x50ffffff 64bit pref]
[    0.380226] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.380236] pci 0000:00:1c.1:   bridge window [io  0x4000-0x4fff]
[    0.380246] pci 0000:00:1c.1:   bridge window [mem 0x56100000-0x570fffff]
[    0.380259] pci 0000:00:1c.1:   bridge window [mem 0x51000000-0x51ffffff 64bit pref]
[    0.380436] pci 0000:03:00.0: [1969:1062] type 00 class 0x020000
[    0.380478] pci 0000:03:00.0: reg 0x10: [mem 0x55000000-0x5503ffff 64bit]
[    0.380500] pci 0000:03:00.0: reg 0x18: [io  0x2000-0x207f]
[    0.380660] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.388032] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.388044] pci 0000:00:1c.2:   bridge window [io  0x2000-0x3fff]
[    0.388054] pci 0000:00:1c.2:   bridge window [mem 0x55000000-0x560fffff]
[    0.388067] pci 0000:00:1c.2:   bridge window [mem 0x52000000-0x52ffffff 64bit pref]
[    0.388186] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.388196] pci 0000:00:1c.3:   bridge window [io  0x1000-0x1fff]
[    0.388205] pci 0000:00:1c.3:   bridge window [mem 0x54000000-0x54ffffff]
[    0.388218] pci 0000:00:1c.3:   bridge window [mem 0x53000000-0x53ffffff 64bit pref]
[    0.388363] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
[    0.388383] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.388389] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xefff] (subtractive decode)
[    0.388396] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.388402] pci 0000:00:1e.0:   bridge window [mem 0x40000000-0xfebfffff] (subtractive decode)
[    0.388452] pci_bus 0000:00: on NUMA node 0
[    0.460265] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[    0.460455] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
[    0.460639] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
[    0.460822] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
[    0.461005] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    0.461189] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    0.461373] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    0.461557] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    0.463065] ACPI: Enabled 3 GPEs in block 00 to 1F
[    0.463088] ACPI: \_SB_.PCI0: notify handler is installed
[    0.463206] Found 1 acpi root devices
[    0.463324] ACPI : EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
[    0.463525] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.463525] vgaarb: loaded
[    0.463525] vgaarb: bridge control possible 0000:00:02.0
[    0.463525] PCI: Using ACPI for IRQ routing
[    0.475094] PCI: pci_cache_line_size set to 64 bytes
[    0.475189] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.475195] e820: reserve RAM buffer [mem 0x3f576000-0x3fffffff]
[    0.475201] e820: reserve RAM buffer [mem 0x3f66d000-0x3fffffff]
[    0.475206] e820: reserve RAM buffer [mem 0x3f6ee000-0x3fffffff]
[    0.475211] e820: reserve RAM buffer [mem 0x3f700000-0x3fffffff]
[    0.475515] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.475526] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.475536] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.477054] Switched to clocksource hpet
[    0.480499] pnp: PnP ACPI init
[    0.480542] ACPI: bus type PNP registered
[    0.552433] pnp 00:00: disabling [io  0x164e-0x164f] because it overlaps 0000:00:1c.3 BAR 13 [io  0x1000-0x1fff]
[    0.552566] system 00:00: [io  0x0200-0x020f] has been reserved
[    0.552575] system 00:00: [io  0x0600-0x060f] has been reserved
[    0.552582] system 00:00: [io  0x0610] has been reserved
[    0.552589] system 00:00: [io  0x0800-0x080f] has been reserved
[    0.552596] system 00:00: [io  0x0400-0x047f] could not be reserved
[    0.552604] system 00:00: [io  0x0500-0x053f] has been reserved
[    0.552611] system 00:00: [io  0xff2c-0xff2f] has been reserved
[    0.552620] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[    0.552627] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.552634] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
[    0.552642] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.552649] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.552656] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.552663] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.552673] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.552707] pnp 00:01: [dma 4]
[    0.552763] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.552883] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.553128] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.553220] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.553300] pnp 00:05: Plug and Play ACPI device, IDs INT0800 (active)
[    0.553437] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.553652] pnp 00:07: Plug and Play ACPI device, IDs SYN1b1c SYN1b00 SYN0002 PNP0f13 (active)
[    0.554016] pnp: PnP ACPI: found 8 devices
[    0.554021] ACPI: bus type PNP unregistered
[    0.554028] PnPBIOS: Disabled by ACPI PNP
[    0.594905] pci 0000:00:1f.0: BAR 13: [io  0x0400-0x047f] has bogus alignment
[    0.594917] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.594927] pci 0000:00:1c.0:   bridge window [io  0x5000-0x5fff]
[    0.594939] pci 0000:00:1c.0:   bridge window [mem 0x57100000-0x581fffff]
[    0.594949] pci 0000:00:1c.0:   bridge window [mem 0x50000000-0x50ffffff 64bit pref]
[    0.594963] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.594971] pci 0000:00:1c.1:   bridge window [io  0x4000-0x4fff]
[    0.594981] pci 0000:00:1c.1:   bridge window [mem 0x56100000-0x570fffff]
[    0.594991] pci 0000:00:1c.1:   bridge window [mem 0x51000000-0x51ffffff 64bit pref]
[    0.595004] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.595011] pci 0000:00:1c.2:   bridge window [io  0x2000-0x3fff]
[    0.595022] pci 0000:00:1c.2:   bridge window [mem 0x55000000-0x560fffff]
[    0.595031] pci 0000:00:1c.2:   bridge window [mem 0x52000000-0x52ffffff 64bit pref]
[    0.595044] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.595052] pci 0000:00:1c.3:   bridge window [io  0x1000-0x1fff]
[    0.595062] pci 0000:00:1c.3:   bridge window [mem 0x54000000-0x54ffffff]
[    0.595072] pci 0000:00:1c.3:   bridge window [mem 0x53000000-0x53ffffff 64bit pref]
[    0.595084] pci 0000:00:1e.0: PCI bridge to [bus 05]
[    0.595106] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.595112] pci_bus 0000:00: resource 5 [io  0x0d00-0xefff]
[    0.595119] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.595125] pci_bus 0000:00: resource 7 [mem 0x40000000-0xfebfffff]
[    0.595132] pci_bus 0000:01: resource 0 [io  0x5000-0x5fff]
[    0.595138] pci_bus 0000:01: resource 1 [mem 0x57100000-0x581fffff]
[    0.595145] pci_bus 0000:01: resource 2 [mem 0x50000000-0x50ffffff 64bit pref]
[    0.595152] pci_bus 0000:02: resource 0 [io  0x4000-0x4fff]
[    0.595158] pci_bus 0000:02: resource 1 [mem 0x56100000-0x570fffff]
[    0.595164] pci_bus 0000:02: resource 2 [mem 0x51000000-0x51ffffff 64bit pref]
[    0.595172] pci_bus 0000:03: resource 0 [io  0x2000-0x3fff]
[    0.595178] pci_bus 0000:03: resource 1 [mem 0x55000000-0x560fffff]
[    0.595185] pci_bus 0000:03: resource 2 [mem 0x52000000-0x52ffffff 64bit pref]
[    0.595191] pci_bus 0000:04: resource 0 [io  0x1000-0x1fff]
[    0.595198] pci_bus 0000:04: resource 1 [mem 0x54000000-0x54ffffff]
[    0.595204] pci_bus 0000:04: resource 2 [mem 0x53000000-0x53ffffff 64bit pref]
[    0.595211] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7]
[    0.595217] pci_bus 0000:05: resource 5 [io  0x0d00-0xefff]
[    0.595224] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[    0.595230] pci_bus 0000:05: resource 7 [mem 0x40000000-0xfebfffff]
[    0.595347] NET: Registered protocol family 2
[    0.595753] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.595797] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.595856] TCP: Hash tables configured (established 8192 bind 8192)
[    0.595948] TCP: reno registered
[    0.595957] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.595975] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.596169] NET: Registered protocol family 1
[    0.596206] pci 0000:00:02.0: Boot video device
[    0.598386] PCI: CLS 0 bytes, default 64
[    0.598517] Unpacking initramfs...
[    1.256348] Freeing initrd memory: 13140K (f6646000 - f731b000)
[    1.256464] Simple Boot Flag value 0x5 read from CMOS RAM was invalid
[    1.256471] Simple Boot Flag at 0x44 set to 0x1
[    1.256782] microcode: CPU0 sig=0x106c2, pf=0x4, revision=0x212
[    1.256802] microcode: CPU1 sig=0x106c2, pf=0x4, revision=0x212
[    1.256964] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.257584] audit: initializing netlink socket (disabled)
[    1.257613] type=2000 audit(1395560659.256:1): initialized
[    1.287319] bounce pool size: 64 pages
[    1.287332] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.287906] VFS: Disk quotas dquot_6.5.2
[    1.287968] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.288240] msgmni has been set to 1747
[    1.289077] alg: No test for stdrng (krng)
[    1.289159] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.289249] io scheduler noop registered
[    1.289256] io scheduler deadline registered
[    1.289290] io scheduler cfq registered (default)
[    1.289752] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[    1.289884] pcieport 0000:00:1c.1: enabling device (0000 -> 0003)
[    1.290110] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[    1.290442] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[    1.290564] pcieport 0000:00:1c.3: enabling device (0000 -> 0003)
[    1.290790] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
[    1.290988] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.291039] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.291142] intel_idle: MWAIT substates: 0x20220
[    1.291159] intel_idle: v0.4 model 0x1C
[    1.291164] intel_idle: lapic_timer_reliable_states 0x2
[    1.291169] tsc: Marking TSC unstable due to TSC halts in idle states deeper than C2
[    1.291338] GHES: HEST is not enabled!
[    1.291367] isapnp: Scanning for PnP cards...
[    1.645365] isapnp: No Plug & Play device found
[    1.645544] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.646688] Linux agpgart interface v0.103
[    1.646877] agpgart-intel 0000:00:00.0: Intel 945GME Chipset
[    1.647032] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[    1.647189] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[    1.647445] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x40000000
[    1.647754] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSS0] at 0x60,0x64 irq 1,12
[    1.667822] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.667839] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.668233] mousedev: PS/2 mouse device common for all mice
[    1.669230] rtc_cmos 00:02: RTC can wake from S4
[    1.669492] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    1.669543] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs
[    1.669834] TCP: cubic registered
[    1.669962] NET: Registered protocol family 10
[    1.670407] mip6: Mobile IPv6
[    1.670414] NET: Registered protocol family 17
[    1.670424] mpls_gso: MPLS GSO support
[    1.670759] Using IPI No-Shortcut mode
[    1.671069] registered taskstats version 1
[    1.672050] rtc_cmos 00:02: setting system clock to 2014-03-23 07:44:20 UTC (1395560660)
[    1.672169] PM: Hibernation image not present or could not be loaded.
[    1.672665] Freeing unused kernel memory: 532K (c15b8000 - c163d000)
[    1.672727] Write protecting the kernel text: 4192k
[    1.672805] Write protecting the kernel read-only data: 1284k
[    1.672811] NX-protecting the kernel data: 4000k
[    1.691868] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.702855] systemd-udevd[56]: starting version 204
[    1.854336] ACPI: Fan [FAN] (on)
[    1.877990] thermal LNXTHERM:00: registered as thermal_zone0
[    1.878000] ACPI: Thermal Zone [THRM] (27 C)
[    1.883940] ACPI: bus type USB registered
[    1.888148] usbcore: registered new interface driver usbfs
[    1.888205] usbcore: registered new interface driver hub
[    1.892504] SCSI subsystem initialized
[    1.892527] usbcore: registered new device driver usb
[    1.893868] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.894579] ehci-pci: EHCI PCI platform driver
[    1.894847] uhci_hcd: USB Universal Host Controller Interface driver
[    1.895033] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    1.895054] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    1.895084] ehci-pci 0000:00:1d.7: debug port 1
[    1.899035] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[    1.899887] ehci-pci 0000:00:1d.7: irq 16, io mem 0x58344400
[    1.900939] atl1c 0000:03:00.0: version 1.0.1.1-NAPI
[    1.908081] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.908288] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.908299] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.908308] usb usb1: Product: EHCI Host Controller
[    1.908316] usb usb1: Manufacturer: Linux 3.13-1-686-pae ehci_hcd
[    1.908323] usb usb1: SerialNumber: 0000:00:1d.7
[    1.908861] hub 1-0:1.0: USB hub found
[    1.908905] hub 1-0:1.0: 8 ports detected
[    1.910606] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.910636] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.910700] uhci_hcd 0000:00:1d.0: irq 16, io base 0x000060a0
[    1.910915] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.910926] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.910933] usb usb2: Product: UHCI Host Controller
[    1.910940] usb usb2: Manufacturer: Linux 3.13-1-686-pae uhci_hcd
[    1.910947] usb usb2: SerialNumber: 0000:00:1d.0
[    1.911389] hub 2-0:1.0: USB hub found
[    1.911421] hub 2-0:1.0: 2 ports detected
[    1.912178] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.912204] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    1.912305] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00006080
[    1.912515] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.912526] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.912534] usb usb3: Product: UHCI Host Controller
[    1.912541] usb usb3: Manufacturer: Linux 3.13-1-686-pae uhci_hcd
[    1.912549] usb usb3: SerialNumber: 0000:00:1d.1
[    1.913258] hub 3-0:1.0: USB hub found
[    1.913292] hub 3-0:1.0: 2 ports detected
[    1.913965] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.913987] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    1.914085] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00006060
[    1.914294] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.914306] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.914316] usb usb4: Product: UHCI Host Controller
[    1.914323] usb usb4: Manufacturer: Linux 3.13-1-686-pae uhci_hcd
[    1.914330] usb usb4: SerialNumber: 0000:00:1d.2
[    1.914450] libata version 3.00 loaded.
[    1.915907] hub 4-0:1.0: USB hub found
[    1.915954] hub 4-0:1.0: 2 ports detected
[    1.917724] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    1.917755] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    1.917868] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00006040
[    1.919109] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.919121] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.919130] usb usb5: Product: UHCI Host Controller
[    1.919137] usb usb5: Manufacturer: Linux 3.13-1-686-pae uhci_hcd
[    1.919145] usb usb5: SerialNumber: 0000:00:1d.3
[    1.921250] hub 5-0:1.0: USB hub found
[    1.921287] hub 5-0:1.0: 2 ports detected
[    1.922441] ahci 0000:00:1f.2: version 3.0
[    1.924434] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
[    1.924655] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    1.924721] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x5 impl SATA mode
[    1.924734] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pio slum part 
[    1.940918] scsi0 : ahci
[    1.948269] scsi1 : ahci
[    1.956416] scsi2 : ahci
[    1.958723] scsi3 : ahci
[    1.958942] ata1: SATA max UDMA/133 abar m1024@0x58344000 port 0x58344100 irq 44
[    1.958951] ata2: DUMMY
[    1.958961] ata3: SATA max UDMA/133 abar m1024@0x58344000 port 0x58344200 irq 44
[    1.958968] ata4: DUMMY
[    2.276146] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.276164] usb 1-2: new high-speed USB device number 3 using ehci-pci
[    2.277424] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    2.277876] ata1.00: ATA-8: Hitachi HTS543216L9A300, FB2OC40C, max UDMA/133
[    2.277891] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.279500] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[    2.279948] ata1.00: configured for UDMA/133
[    2.280347] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54321 FB2O PQ: 0 ANSI: 5
[    2.440113] usb 1-2: New USB device found, idVendor=0c45, idProduct=62c0
[    2.440131] usb 1-2: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[    2.440143] usb 1-2: Product: WebCam
[    2.440154] usb 1-2: Manufacturer: Sonix Technology Co., Ltd.
[    2.600120] ata3: SATA link down (SStatus 0 SControl 300)
[    2.616879] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    2.617147] sd 0:0:0:0: [sda] Write Protect is off
[    2.617156] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.617254] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.650438]  sda: sda1 sda2 < sda5 >
[    2.651622] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.655897] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.888201] usb 2-1: new low-speed USB device number 2 using uhci_hcd
[    2.926418] device-mapper: uevent: version 1.0.3
[    2.926628] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    2.938114] random: lvm urandom read with 34 bits of entropy available
[    2.971804] bio: create slab <bio-1> at 1
[    3.058168] usb 2-1: New USB device found, idVendor=1bcf, idProduct=053a
[    3.058181] usb 2-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    3.058190] usb 2-1: Product: 2.4GHz 2way RF Receiver
[    3.073896] hidraw: raw HID events driver (C) Jiri Kosina
[    3.107739] usbcore: registered new interface driver usbhid
[    3.107747] usbhid: USB HID core driver
[    3.115352] input: 2.4GHz 2way RF Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input2
[    3.115819] hid-generic 0003:1BCF:053A.0001: input,hiddev0,hidraw0: USB HID v1.00 Mouse [2.4GHz 2way RF Receiver] on usb-0000:00:1d.0-1/input0
[    3.315817] PM: Starting manual resume from disk
[    3.315827] PM: Hibernation image partition 254:1 present
[    3.315831] PM: Looking for hibernation image.
[    3.316145] PM: Image not found (code -22)
[    3.316151] PM: Hibernation image not present or could not be loaded.
[    3.351370] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[    4.374093] random: nonblocking pool is initialized
[    4.479058] systemd-udevd[336]: starting version 204
[    5.037341] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[    5.037354] ACPI: Power Button [PWRB]
[    5.037541] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
[    5.037622] ACPI: Lid Switch [LID0]
[    5.037806] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5
[    5.037819] ACPI: Sleep Button [SLPB]
[    5.038040] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[    5.038050] ACPI: Power Button [PWRF]
[    5.083916] ACPI: Video Device [OVGA] (multi-head: yes  rom: yes  post: no)
[    5.180179] ACPI: AC Adapter [AC] (on-line)
[    5.210709] [drm] Initialized drm 1.1.0 20060810
[    5.297933] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[    5.331683] intel_rng: FWH not detected
[    5.400306] acpi device:28: registered as cooling_device3
[    5.400613] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7
[    5.407580] wmi: Mapper loaded
[    5.462065] input: PC Speaker as /devices/platform/pcspkr/input/input8
[    5.549544] ACPI Warning: 0x00000428-0x0000042f SystemIO conflicts with Region \PMBA 1 (20131115/utaddress-251)
[    5.549566] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.549576] ACPI Warning: 0x00000530-0x0000053f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[    5.549589] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.549595] ACPI Warning: 0x00000500-0x0000052f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[    5.549607] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.549613] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    5.662765] media: Linux media interface: v0.10
[    5.677355] Linux video capture interface: v2.00
[    5.800409] cfg80211: Calling CRDA to update world regulatory domain
[    5.805733] leds_ss4200: no LED devices found
[    5.868854] [drm] Memory usable by graphics device = 256M
[    5.869378] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    5.869383] [drm] Driver supports precise vblank timestamp query.
[    5.869532] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    5.928311] ACPI: Battery Slot [BAT0] (battery present)
[    5.957750] [drm] initialized overlay support
[    5.979601] fbcon: inteldrmfb (fb0) is primary device
[    6.022676] iTCO_vendor_support: vendor-support=0
[    6.030841] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[    6.030918] iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x0460)
[    6.031844] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    6.039167] acer_wmi: Acer Laptop ACPI-WMI Extras
[    6.080969] uvcvideo: Found UVC 1.00 device WebCam (0c45:62c0)
[    6.098158] input: WebCam as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0/input/input10
[    6.098352] usbcore: registered new interface driver uvcvideo
[    6.098353] USB Video Class driver (1.1.1)
[    6.185819] ath: phy0: Enable LNA combining
[    6.188966] ath: phy0: ASPM enabled: 0x42
[    6.188970] ath: EEPROM regdomain: 0x65
[    6.188972] ath: EEPROM indicates we should expect a direct regpair map
[    6.188976] ath: Country alpha2 being used: 00
[    6.188977] ath: Regpair used: 0x65
[    6.216229] acer_wmi: Function bitmap for Communication Device: 0x1
[    6.216243] acer_wmi: Brightness must be controlled by acpi video driver
[    6.216779] input: Acer BMA150 accelerometer as /devices/virtual/input/input11
[    6.224358] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    6.225118] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xf8720000, irq=16
[    6.681616] Console: switching to colour frame buffer device 128x37
[    6.690911] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    6.690920] i915 0000:00:02.0: registered panic notifier
[    6.690971] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    6.691516] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[    6.761260] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input12
[    6.766433] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[    6.766717] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[    6.849637] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04773/0xa40000/0xa0000, board id: 3655, fw id: 511380
[    6.931538] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input9
[    8.287732] EXT4-fs (dm-0): re-mounted. Opts: (null)
[    8.567085] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[    8.982608] Adding 2072572k swap on /dev/mapper/Lap200314--vg-swap_1.  Priority:-1 extents:1 across:2072572k 
[   10.121607] lp: driver loaded but no devices found
[   10.139769] ppdev: user-space parallel port driver
[   10.202718] fuse init (API version 7.22)
[   10.278112] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[   10.282761] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[   10.338564] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: (null)
[   10.357241] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null)
[   10.402871] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[   10.442819] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
[   12.588889] RPC: Registered named UNIX socket transport module.
[   12.588899] RPC: Registered udp transport module.
[   12.588905] RPC: Registered tcp transport module.
[   12.588910] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   12.624159] FS-Cache: Loaded
[   12.665705] FS-Cache: Netfs 'nfs' registered for caching
[   12.738664] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   15.852070] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input15
[   19.643711] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   19.679315] atl1c 0000:03:00.0: irq 46 for MSI/MSI-X
[   19.694143] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   22.037820] wlan0: authenticate with 00:19:70:ab:b2:33
[   22.063001] wlan0: send auth to 00:19:70:ab:b2:33 (try 1/3)
[   22.066324] wlan0: authenticated
[   22.072117] wlan0: associate with 00:19:70:ab:b2:33 (try 1/3)
[   22.076128] wlan0: RX AssocResp from 00:19:70:ab:b2:33 (capab=0x431 status=0 aid=2)
[   22.076250] wlan0: associated
[   22.076426] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   22.152120] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:19:70:ab:b2:33
[   48.927915] Bluetooth: Core ver 2.17
[   48.928058] NET: Registered protocol family 31
[   48.928065] Bluetooth: HCI device and connection manager initialized
[   48.929207] Bluetooth: HCI socket layer initialized
[   48.929223] Bluetooth: L2CAP socket layer initialized
[   48.929251] Bluetooth: SCO socket layer initialized
[   48.954220] Bluetooth: RFCOMM TTY layer initialized
[   48.954251] Bluetooth: RFCOMM socket layer initialized
[   48.954270] Bluetooth: RFCOMM ver 1.11
[   49.033004] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   49.033014] Bluetooth: BNEP filters: protocol multicast
[   49.033043] Bluetooth: BNEP socket layer initialized

Offline

 

#9  2014-03-23 10:13:01

  ilin - Palacz

ilin
Palacz
Skąd: PRLu
Zarejestrowany: 2006-05-03

Re: Dziwny plik

Nic tam niepokojącego nie zauważyłem.

Polecenie

Kod:

mount -a

nie zwraca żadnego błędu ?

Problemy rozwiązujemy na forum nie na PW -> Niech inni na tym skorzystają.
Polski portal Debiana

Offline

 

#10  2014-03-23 10:19:20

  Arristo - Użytkownik

Arristo
Użytkownik
Skąd: Zielona Góra
Zarejestrowany: 2014-02-20

Re: Dziwny plik

Nie zwraca żadnego błędu:

Kod:

# mount -a
#

Ostatnio edytowany przez Arristo (2014-03-23 10:26:05)

Offline

 

#11  2014-03-23 10:40:59

  ilin - Palacz

ilin
Palacz
Skąd: PRLu
Zarejestrowany: 2006-05-03

Re: Dziwny plik

Zobacz też do pliku
/var/log/messages

Problemy rozwiązujemy na forum nie na PW -> Niech inni na tym skorzystają.
Polski portal Debiana

Offline

 

#12  2014-03-23 11:08:42

  lis6502 - Łowca lamerów

lis6502
Łowca lamerów
Skąd: Stalinogród
Zarejestrowany: 2008-12-04

Re: Dziwny plik

luk hir. W Gentoo mam OpenRC i mam możliwość zapisywania /var/log/rc.log, w którym to zapisywane są wszystkie wydarzenia związane z bootowaniem i błędy tegoż; dzięki temu troubleshootnąłem literówkę w fstabie przez którą jądro montowało mi / jako ro xD

Kod:

rc sysinit logging started at Tue Mar 18 19:42:23 2014


   OpenRC 0.12.4 is starting up Gentoo Linux (x86_64)

 * /proc is already mounted
 * Mounting /run ...
 * /run/openrc: creating directory
 * /run/lock: creating directory
 * /run/lock: correcting owner
 * Caching service dependencies ...
 [ ok ]
 * Using /dev mounted from kernel ...
 [ ok ]
 * Mounting /dev/mqueue ...
 [ ok ]
 * Mounting /dev/shm ...
 [ ok ]
 * Mounting config filesystem ...
 [ ok ]
 * Mounting cgroup filesystem ...
 [ ok ]
 * Mounting fuse control filesystem ...
 [ ok ]
 * setting up tmpfiles.d entries for /dev ...
 [ ok ]
 * Starting udev ...
 [ ok ]
 * Generating a rule to create a /dev/root symlink ...
 [ ok ]
 * Populating /dev with existing devices through uevents ...
 [ ok ]
 * Waiting for uevents to be processed ...
 [ ok ]

rc sysinit logging stopped at Tue 
 19:42:23 2014


rc boot logging started at Tue Mar 18 19:42:23 2014

 * Setting system clock using the hardware clock [UTC] ...
 [ ok ]
 * Autoloaded 0 module(s)
 * Checking local filesystems  ...
/dev/sda1: clean, 295122/8593408 files, 1335904/34373120 blocks
 [ ok ]
 * Remounting root filesystem read/write ...
mount: / not mounted or bad option
       In some cases useful info is found in syslog - try
       dmesg | tail or so
 * Root filesystem could not be mounted read/write
 [ !! ]
 * Remounting filesystems ...
 [ ok ]
 * Updating /etc/mtab ...
 * /etc/mtab is not updateable
 [ !! ]
 * Activating swap devices ...
 [ ok ]
 * Mounting local filesystems ...
 [ ok ]
 * Configuring kernel parameters ...
 [ ok ]
mkdir: cannot create directory ‘/var/lib/misc’: Read-only file system
 * failed to create needed directory /var/lib/misc
 [ !! ]
 * ERROR: bootmisc failed to start
 * Setting hostname to Nexus ...
 [ ok ]
 * Setting terminal encoding [UTF-8] ...
 [ ok ]
 * Setting keyboard mode [UTF-8] ...
 [ ok ]
 * Loading key mappings [us] ...
 [ ok ]
 * Bringing up network interface lo ...
 [ ok ]
 * Activating additional swap space ...
 [ ok ]
 * setting up tmpfiles.d entries ...
 [ ok ]

rc boot logging stopped at Tue Mar 18 19:42:24 2014


rc default logging started at Tue Mar 18 19:42:24 2014

mkdir: cannot create directory ‘/var/lib/misc’: Read-only file system
 * failed to create needed directory /var/lib/misc
 [ !! ]
 * ERROR: bootmisc failed to start
 * Checking your configfile (/etc/syslog-ng/syslog-ng.conf) ...
 [ ok ]
 * /var/lib/syslog-ng: correcting mode
 * checkpath: chmod: Read-only file system
 * ERROR: syslog-ng failed to start
 * Starting cronie ...
 [ ok ]
 * Bringing up interface eth0
 *   Caching network module dependencies
need firewalld
 *   ERROR: interface eth0 does not exist
 *   Ensure that you have loaded the correct kernel module for your hardware
 * ERROR: net.eth0 failed to start
 * ERROR: cannot start netmount as net.eth0 would not start
ssh-keygen: generating new host keys: RSA1 open /etc/ssh/ssh_host_key failed: Read-only file system.
Saving the key failed: /etc/ssh/ssh_host_key.
ssh-keygen: generating new host keys: RSA open /etc/ssh/ssh_host_rsa_key failed: Read-only file system.
Saving the key failed: /etc/ssh/ssh_host_rsa_key.
ssh-keygen: generating new host keys: DSA open /etc/ssh/ssh_host_dsa_key failed: Read-only file system.
Saving the key failed: /etc/ssh/ssh_host_dsa_key.
Could not load host key: /etc/ssh/ssh_host_rsa_key
Could not load host key: /etc/ssh/ssh_host_dsa_key
Disabling protocol version 2. Could not load host key
sshd: no hostkeys available -- exiting.
 * ERROR: sshd failed to start
 * Starting local
 [ ok ]

rc default logging stopped at Tue Mar 18 19:42:26 2014


rc shutdown logging started at Wed Mar 19 14:49:39 2014

 * Caching service dependencies ...
 [ ok ]
 * Stopping local
 [ ok ]
 * Saving random seed ...
 * Failed to save random seed
 [ !! ]
 * ERROR: urandom failed to stop
 * Deactivating additional swap space ...
 [ ok ]
 * Stopping sshd ...
 [ ok ]
 * Stopping cronie ...
 [ ok ]
 * Stopping syslog-ng ...
 [ ok ]
 * Unmounting loop devices
 * Unmounting filesystems
 * Deactivating swap devices ...
 [ ok ]
 * Stopping udev ...
 [ ok ]
 * Setting hardware clock using the system clock [UTC] ...
 [ ok ]

rc shutdown logging stopped at Wed Mar 19 14:49:42 2014

Jak widać (lub nie) logowane jest działanie usług skategoryzowane na runlevele.

Offline

 

#13  2014-03-23 13:08:46

  Arristo - Użytkownik

Arristo
Użytkownik
Skąd: Zielona Góra
Zarejestrowany: 2014-02-20

Re: Dziwny plik

W fstabie nic nie dłubałem, więc literówki być nie może. To jest jakaś inna przyczyna.

Mój fstab wygląda tak:

Kod:

# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
/dev/mapper/Lap200314--vg-root /               ext4    errors=remount-ro 0       1
# /boot was on /dev/sda1 during installation
UUID=1611b681-e0d4-4733-8a3c-d2820ea35799 /boot           ext2    defaults        0       2
/dev/mapper/Lap200314--vg-home /home           ext4    defaults        0       2
/dev/mapper/Lap200314--vg-tmp /tmp            ext4    defaults        0       2
/dev/mapper/Lap200314--vg-usr /usr            ext4    defaults        0       2
/dev/mapper/Lap200314--vg-var /var            ext4    defaults        0       2
/dev/mapper/Lap200314--vg-swap_1 none            swap    sw              0       0
/dev/sdb1       /media/usb0     auto    rw,user,noauto  0       0

Ostatnio edytowany przez Arristo (2014-03-23 13:19:01)

Offline

 

#14  2014-03-23 15:31:04

  Arristo - Użytkownik

Arristo
Użytkownik
Skąd: Zielona Góra
Zarejestrowany: 2014-02-20

Re: Dziwny plik

ilin napisał(-a):

Zobacz też do pliku
/var/log/messages

To jego treść:

Kod:

# cat messages
Mar 23 10:56:54 Lap200314 kernel: [ 7957.657101] perf samples too long (10003 > 10000), lowering kernel.perf_event_max_sample_rate to 12500
Mar 23 10:59:08 Lap200314 kernel: [ 8091.149947] wlan0: deauthenticating from 00:19:70:ab:b2:33 by local choice (reason=3)
Mar 23 10:59:08 Lap200314 kernel: [ 8091.162842] cfg80211: Calling CRDA for country: NA
Mar 23 10:59:10 Lap200314 kernel: [ 8093.300400] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.13-1-686-pae #1 Debian 3.13.5-1
Mar 23 10:59:10 Lap200314 kernel: [ 8093.300405] Hardware name: eMachines  eM250           /eM250           , BIOS V1.25 11/28/2009
Mar 23 10:59:10 Lap200314 kernel: [ 8093.300410]  00000012 c140b038 f75ef980 c1093c01 c14da8d8 00000012 00000000 c159d420
Mar 23 10:59:10 Lap200314 kernel: [ 8093.300425]  f75ef980 00000012 c1093fea c159d44c 92b8068c 00000469 00000000 f75ef980
Mar 23 10:59:10 Lap200314 kernel: [ 8093.300438]  00000000 f75ef9d4 00000012 c10921d1 fe7ffbef b7fffebb c55330ca 17efc875
Mar 23 10:59:10 Lap200314 kernel: [ 8093.300450] Call Trace:
Mar 23 10:59:10 Lap200314 kernel: [ 8093.300465]  [<c140b038>] ? dump_stack+0x3e/0x4e
Mar 23 10:59:10 Lap200314 kernel: [ 8093.300474]  [<c1093c01>] ? __report_bad_irq+0x21/0xc0
Mar 23 10:59:10 Lap200314 kernel: [ 8093.300482]  [<c1093fea>] ? note_interrupt+0x15a/0x1a0
Mar 23 10:59:10 Lap200314 kernel: [ 8093.300492]  [<c10921d1>] ? handle_irq_event_percpu+0xc1/0x1a0
Mar 23 10:59:10 Lap200314 kernel: [ 8093.300500]  [<c10922d2>] ? handle_irq_event+0x22/0x40
Mar 23 10:59:10 Lap200314 kernel: [ 8093.300507]  [<c1094860>] ? unmask_irq+0x20/0x20
Mar 23 10:59:10 Lap200314 kernel: [ 8093.300514]  [<c10948a3>] ? handle_fasteoi_irq+0x43/0xd0
Mar 23 10:59:10 Lap200314 kernel: [ 8093.300518]  <IRQ>  [<c10104e1>] ? do_IRQ+0x31/0xa0
Mar 23 10:59:10 Lap200314 kernel: [ 8093.300533]  [<c1416773>] ? common_interrupt+0x33/0x38
Mar 23 10:59:10 Lap200314 kernel: [ 8093.300541]  [<c109007b>] ? vprintk_emit+0xdb/0x560
Mar 23 10:59:10 Lap200314 kernel: [ 8093.300549]  [<c131e7d6>] ? cpuidle_enter_state+0x36/0xd0
Mar 23 10:59:10 Lap200314 kernel: [ 8093.300557]  [<c131e8fc>] ? cpuidle_idle_call+0x8c/0x1b0
Mar 23 10:59:10 Lap200314 kernel: [ 8093.300565]  [<c1016385>] ? arch_cpu_idle+0x5/0x20
Mar 23 10:59:10 Lap200314 kernel: [ 8093.300573]  [<c10919a9>] ? cpu_startup_entry+0x1b9/0x200
Mar 23 10:59:10 Lap200314 kernel: [ 8093.300581]  [<c15b8aa2>] ? start_kernel+0x3ad/0x3b2
Mar 23 10:59:10 Lap200314 kernel: [ 8093.300589]  [<c15b8541>] ? repair_env_string+0x4d/0x4d
Mar 23 11:42:01 Lap200314 kernel: [ 8098.048778] PM: Syncing filesystems ... done.
Mar 23 11:42:01 Lap200314 kernel: [ 8098.235704] Freezing user space processes ... (elapsed 0.058 seconds) done.
Mar 23 11:42:01 Lap200314 kernel: [ 8098.293935] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
Mar 23 11:42:01 Lap200314 kernel: [ 8098.295522] Suspending console(s) (use no_console_suspend to debug)
Mar 23 11:42:01 Lap200314 kernel: [ 8098.296132] sd 0:0:0:0: [sda] Synchronizing SCSI cache
Mar 23 11:42:01 Lap200314 kernel: [ 8098.323892] sd 0:0:0:0: [sda] Stopping disk
Mar 23 11:42:01 Lap200314 kernel: [ 8098.904221] PM: suspend of devices complete after 608.389 msecs
Mar 23 11:42:01 Lap200314 kernel: [ 8098.904575] PM: late suspend of devices complete after 0.341 msecs
Mar 23 11:42:01 Lap200314 kernel: [ 8098.904831] pcieport 0000:00:1c.2: System wakeup enabled by ACPI
Mar 23 11:42:01 Lap200314 kernel: [ 8098.936246] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
Mar 23 11:42:01 Lap200314 kernel: [ 8098.952121] uhci_hcd 0000:00:1d.3: System wakeup enabled by ACPI
Mar 23 11:42:01 Lap200314 kernel: [ 8098.952204] uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI
Mar 23 11:42:01 Lap200314 kernel: [ 8098.952285] uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI
Mar 23 11:42:01 Lap200314 kernel: [ 8098.952366] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
Mar 23 11:42:01 Lap200314 kernel: [ 8098.952633] PM: noirq suspend of devices complete after 48.051 msecs
Mar 23 11:42:01 Lap200314 kernel: [ 8098.952681] ACPI: Preparing to enter system sleep state S3
Mar 23 11:42:01 Lap200314 kernel: [ 8098.952824] PM: Saving platform NVS memory
Mar 23 11:42:01 Lap200314 kernel: [ 8098.954162] Disabling non-boot CPUs ...
Mar 23 11:42:01 Lap200314 kernel: [ 8099.032070] ACPI Exception: AE_BAD_PARAMETER, Returned by Handler for [EmbeddedControl] (20131115/evregion-282)
Mar 23 11:42:01 Lap200314 kernel: [ 8099.032085] ACPI Error: Method parse/execution failed [\_SB_.PCI0.WMID.WGDS] (Node f7456248), AE_BAD_PARAMETER (20131115/psparse-536)
Mar 23 11:42:01 Lap200314 kernel: [ 8099.032099] ACPI Error: Method parse/execution failed [\_SB_.PCI0.WMID.WMBA] (Node f7456b18), AE_BAD_PARAMETER (20131115/psparse-536)
Mar 23 11:42:01 Lap200314 kernel: [ 8099.056030] smpboot: CPU 1 is now offline
Mar 23 11:42:01 Lap200314 kernel: [ 8099.056500] ACPI: Low-level resume complete
Mar 23 11:42:01 Lap200314 kernel: [ 8099.056500] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S0_] (20131115/hwxface-580)
Mar 23 11:42:01 Lap200314 kernel: [ 8099.056500] PM: Restoring platform NVS memory
Mar 23 11:42:01 Lap200314 kernel: [ 8099.056500] Enabling non-boot CPUs ...
Mar 23 11:42:01 Lap200314 kernel: [ 8099.056500] x86: Booting SMP configuration:
Mar 23 11:42:01 Lap200314 kernel: [ 8099.056500] smpboot: Booting Node 0 Processor 1 APIC 0x1
Mar 23 11:42:01 Lap200314 kernel: [ 8098.955713] Initializing CPU#1
Mar 23 11:42:01 Lap200314 kernel: [ 8098.955713] Disabled fast string operations
Mar 23 11:42:01 Lap200314 kernel: [ 8099.069107] CPU1 is up
Mar 23 11:42:01 Lap200314 kernel: [ 8099.069733] ACPI: Waking up from system sleep state S3
Mar 23 11:42:01 Lap200314 kernel: [ 8099.100505] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
Mar 23 11:42:01 Lap200314 kernel: [ 8099.100592] uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI
Mar 23 11:42:01 Lap200314 kernel: [ 8099.100677] uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI
Mar 23 11:42:01 Lap200314 kernel: [ 8099.100762] uhci_hcd 0000:00:1d.3: System wakeup disabled by ACPI
Mar 23 11:42:01 Lap200314 kernel: [ 8099.116125] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
Mar 23 11:42:01 Lap200314 kernel: [ 8099.164311] PM: noirq resume of devices complete after 94.374 msecs
Mar 23 11:42:01 Lap200314 kernel: [ 8099.164519] PM: early resume of devices complete after 0.170 msecs
Mar 23 11:42:01 Lap200314 kernel: [ 8099.168935] usb usb2: root hub lost power or was reset
Mar 23 11:42:01 Lap200314 kernel: [ 8099.169270] usb usb3: root hub lost power or was reset
Mar 23 11:42:01 Lap200314 kernel: [ 8099.169623] usb usb4: root hub lost power or was reset
Mar 23 11:42:01 Lap200314 kernel: [ 8099.169957] usb usb5: root hub lost power or was reset
Mar 23 11:42:01 Lap200314 kernel: [ 8099.171408] ath: phy0: ASPM enabled: 0x42
Mar 23 11:42:01 Lap200314 kernel: [ 8099.171443] pcieport 0000:00:1c.2: System wakeup disabled by ACPI
Mar 23 11:42:01 Lap200314 kernel: [ 8099.408092] usb 1-2: reset high-speed USB device number 3 using ehci-pci
Mar 23 11:42:01 Lap200314 kernel: [ 8099.504117] ata3: SATA link down (SStatus 0 SControl 300)
Mar 23 11:42:01 Lap200314 kernel: [ 8099.800201] usb 2-1: reset low-speed USB device number 2 using uhci_hcd
Mar 23 11:42:01 Lap200314 kernel: [ 8100.572075] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Mar 23 11:42:01 Lap200314 kernel: [ 8100.573349] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
Mar 23 11:42:01 Lap200314 kernel: [ 8100.579432] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
Mar 23 11:42:01 Lap200314 kernel: [ 8100.579986] ata1.00: configured for UDMA/133
Mar 23 11:42:01 Lap200314 kernel: [ 8100.596302] sd 0:0:0:0: [sda] Starting disk
Mar 23 11:42:01 Lap200314 kernel: [ 8100.692360] PM: resume of devices complete after 1527.825 msecs
Mar 23 11:42:01 Lap200314 kernel: [ 8100.692783] Restarting tasks ... done.
Mar 23 11:42:01 Lap200314 kernel: [ 8100.706382] video LNXVIDEO:00: Restoring backlight state
Mar 23 11:42:03 Lap200314 kernel: [ 8102.800600] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Mar 23 11:42:04 Lap200314 kernel: [ 8103.093125] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Mar 23 11:42:06 Lap200314 kernel: [ 8105.214577] wlan0: authenticate with 00:19:70:ab:b2:33
Mar 23 11:42:06 Lap200314 kernel: [ 8105.237368] wlan0: send auth to 00:19:70:ab:b2:33 (try 1/3)
Mar 23 11:42:06 Lap200314 kernel: [ 8105.240449] wlan0: authenticated
Mar 23 11:42:06 Lap200314 kernel: [ 8105.244380] wlan0: associate with 00:19:70:ab:b2:33 (try 1/3)
Mar 23 11:42:06 Lap200314 kernel: [ 8105.247982] wlan0: RX AssocResp from 00:19:70:ab:b2:33 (capab=0x431 status=0 aid=2)
Mar 23 11:42:06 Lap200314 kernel: [ 8105.248135] wlan0: associated
Mar 23 11:42:06 Lap200314 kernel: [ 8105.248164] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Mar 23 11:42:06 Lap200314 kernel: [ 8105.338658] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:19:70:ab:b2:33
Mar 23 11:46:43 Lap200314 kernel: [ 8382.223398] wlan0: deauthenticating from 00:19:70:ab:b2:33 by local choice (reason=3)
Mar 23 11:46:43 Lap200314 kernel: [ 8382.243122] cfg80211: Calling CRDA to update world regulatory domain
Mar 23 11:46:43 Lap200314 kernel: [ 8382.314082] cfg80211: World regulatory domain updated:
Mar 23 11:46:43 Lap200314 kernel: [ 8382.314095] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Mar 23 11:46:43 Lap200314 kernel: [ 8382.314103] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Mar 23 11:46:43 Lap200314 kernel: [ 8382.314110] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Mar 23 11:46:43 Lap200314 kernel: [ 8382.314117] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
Mar 23 11:46:43 Lap200314 kernel: [ 8382.314124] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
Mar 23 11:46:43 Lap200314 kernel: [ 8382.314130] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
Mar 23 11:46:43 Lap200314 kernel: [ 8382.314137] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
Mar 23 11:46:43 Lap200314 kernel: [ 8382.320152] cfg80211: Calling CRDA to update world regulatory domain
Mar 23 11:46:44 Lap200314 kernel: [ 8382.640058] cfg80211: World regulatory domain updated:
Mar 23 11:46:44 Lap200314 kernel: [ 8382.640069] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Mar 23 11:46:44 Lap200314 kernel: [ 8382.640078] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Mar 23 11:46:44 Lap200314 kernel: [ 8382.640085] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Mar 23 11:46:44 Lap200314 kernel: [ 8382.640092] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
Mar 23 11:46:44 Lap200314 kernel: [ 8382.640100] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
Mar 23 11:46:44 Lap200314 kernel: [ 8382.640107] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
Mar 23 11:46:44 Lap200314 kernel: [ 8382.640114] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
Mar 23 12:51:55 Lap200314 kernel: [ 8384.294626] PM: Syncing filesystems ... done.
Mar 23 12:51:55 Lap200314 kernel: [ 8384.420581] Freezing user space processes ... (elapsed 0.002 seconds) done.
Mar 23 12:51:55 Lap200314 kernel: [ 8384.423038] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
Mar 23 12:51:55 Lap200314 kernel: [ 8384.424406] Suspending console(s) (use no_console_suspend to debug)
Mar 23 12:51:55 Lap200314 kernel: [ 8384.424991] sd 0:0:0:0: [sda] Synchronizing SCSI cache
Mar 23 12:51:55 Lap200314 kernel: [ 8384.425177] sd 0:0:0:0: [sda] Stopping disk
Mar 23 12:51:55 Lap200314 kernel: [ 8384.984202] PM: suspend of devices complete after 559.497 msecs
Mar 23 12:51:55 Lap200314 kernel: [ 8384.984559] PM: late suspend of devices complete after 0.344 msecs
Mar 23 12:51:55 Lap200314 kernel: [ 8384.984816] pcieport 0000:00:1c.2: System wakeup enabled by ACPI
Mar 23 12:51:55 Lap200314 kernel: [ 8385.016253] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
Mar 23 12:51:55 Lap200314 kernel: [ 8385.032138] uhci_hcd 0000:00:1d.3: System wakeup enabled by ACPI
Mar 23 12:51:55 Lap200314 kernel: [ 8385.032268] uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI
Mar 23 12:51:55 Lap200314 kernel: [ 8385.032364] uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI
Mar 23 12:51:55 Lap200314 kernel: [ 8385.032446] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
Mar 23 12:51:55 Lap200314 kernel: [ 8385.032722] PM: noirq suspend of devices complete after 48.155 msecs
Mar 23 12:51:55 Lap200314 kernel: [ 8385.032767] ACPI: Preparing to enter system sleep state S3
Mar 23 12:51:55 Lap200314 kernel: [ 8385.032910] PM: Saving platform NVS memory
Mar 23 12:51:55 Lap200314 kernel: [ 8385.034231] Disabling non-boot CPUs ...
Mar 23 12:51:55 Lap200314 kernel: [ 8385.136033] smpboot: CPU 1 is now offline
Mar 23 12:51:55 Lap200314 kernel: [ 8385.136522] ACPI: Low-level resume complete
Mar 23 12:51:55 Lap200314 kernel: [ 8385.136522] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S0_] (20131115/hwxface-580)
Mar 23 12:51:55 Lap200314 kernel: [ 8385.136522] PM: Restoring platform NVS memory
Mar 23 12:51:55 Lap200314 kernel: [ 8385.136522] Enabling non-boot CPUs ...
Mar 23 12:51:55 Lap200314 kernel: [ 8385.136522] x86: Booting SMP configuration:
Mar 23 12:51:55 Lap200314 kernel: [ 8385.136522] smpboot: Booting Node 0 Processor 1 APIC 0x1
Mar 23 12:51:55 Lap200314 kernel: [ 8385.035779] Initializing CPU#1
Mar 23 12:51:55 Lap200314 kernel: [ 8385.035779] Disabled fast string operations
Mar 23 12:51:55 Lap200314 kernel: [ 8385.149174] CPU1 is up
Mar 23 12:51:55 Lap200314 kernel: [ 8385.149789] ACPI: Waking up from system sleep state S3
Mar 23 12:51:55 Lap200314 kernel: [ 8385.180482] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
Mar 23 12:51:55 Lap200314 kernel: [ 8385.180569] uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI
Mar 23 12:51:55 Lap200314 kernel: [ 8385.180654] uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI
Mar 23 12:51:55 Lap200314 kernel: [ 8385.180739] uhci_hcd 0000:00:1d.3: System wakeup disabled by ACPI
Mar 23 12:51:55 Lap200314 kernel: [ 8385.196125] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
Mar 23 12:51:55 Lap200314 kernel: [ 8385.244310] PM: noirq resume of devices complete after 94.318 msecs
Mar 23 12:51:55 Lap200314 kernel: [ 8385.244516] PM: early resume of devices complete after 0.168 msecs
Mar 23 12:51:55 Lap200314 kernel: [ 8385.245960] ath: phy0: ASPM enabled: 0x42
Mar 23 12:51:55 Lap200314 kernel: [ 8385.245989] pcieport 0000:00:1c.2: System wakeup disabled by ACPI
Mar 23 12:51:55 Lap200314 kernel: [ 8385.246921] usb usb2: root hub lost power or was reset
Mar 23 12:51:55 Lap200314 kernel: [ 8385.247266] usb usb3: root hub lost power or was reset
Mar 23 12:51:55 Lap200314 kernel: [ 8385.247608] usb usb4: root hub lost power or was reset
Mar 23 12:51:55 Lap200314 kernel: [ 8385.247936] usb usb5: root hub lost power or was reset
Mar 23 12:51:55 Lap200314 kernel: [ 8385.488213] usb 1-2: reset high-speed USB device number 3 using ehci-pci
Mar 23 12:51:55 Lap200314 kernel: [ 8385.576072] ata3: SATA link down (SStatus 0 SControl 300)
Mar 23 12:51:55 Lap200314 kernel: [ 8385.880229] usb 2-1: reset low-speed USB device number 2 using uhci_hcd
Mar 23 12:51:55 Lap200314 kernel: [ 8386.644058] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Mar 23 12:51:55 Lap200314 kernel: [ 8386.645392] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
Mar 23 12:51:55 Lap200314 kernel: [ 8386.652694] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
Mar 23 12:51:55 Lap200314 kernel: [ 8386.653192] ata1.00: configured for UDMA/133
Mar 23 12:51:55 Lap200314 kernel: [ 8386.668170] sd 0:0:0:0: [sda] Starting disk
Mar 23 12:51:55 Lap200314 kernel: [ 8386.756218] PM: resume of devices complete after 1511.691 msecs
Mar 23 12:51:55 Lap200314 kernel: [ 8386.756635] Restarting tasks ... done.
Mar 23 12:51:55 Lap200314 kernel: [ 8386.771582] video LNXVIDEO:00: Restoring backlight state
Mar 23 12:51:57 Lap200314 kernel: [ 8388.283782] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Mar 23 12:51:57 Lap200314 kernel: [ 8388.553386] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Mar 23 12:51:59 Lap200314 kernel: [ 8390.501285] wlan0: authenticate with 00:19:70:ab:b2:33
Mar 23 12:51:59 Lap200314 kernel: [ 8390.521940] wlan0: send auth to 00:19:70:ab:b2:33 (try 1/3)
Mar 23 12:51:59 Lap200314 kernel: [ 8390.524612] wlan0: authenticated
Mar 23 12:51:59 Lap200314 kernel: [ 8390.528098] wlan0: associate with 00:19:70:ab:b2:33 (try 1/3)
Mar 23 12:51:59 Lap200314 kernel: [ 8390.531696] wlan0: RX AssocResp from 00:19:70:ab:b2:33 (capab=0x431 status=0 aid=2)
Mar 23 12:51:59 Lap200314 kernel: [ 8390.531819] wlan0: associated
Mar 23 12:51:59 Lap200314 kernel: [ 8390.531903] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Mar 23 12:51:59 Lap200314 kernel: [ 8390.532116] cfg80211: Calling CRDA for country: NA
Mar 23 12:51:59 Lap200314 kernel: [ 8390.598722] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:19:70:ab:b2:33
Mar 23 14:31:33 Lap200314 kernel: [14364.479221] wlan0: deauthenticating from 00:19:70:ab:b2:33 by local choice (reason=3)
Mar 23 14:31:33 Lap200314 kernel: [14364.549835] cfg80211: Calling CRDA to update world regulatory domain
Mar 23 14:31:34 Lap200314 kernel: [14365.700689] cfg80211: World regulatory domain updated:
Mar 23 14:31:34 Lap200314 kernel: [14365.700700] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Mar 23 14:31:34 Lap200314 kernel: [14365.700708] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Mar 23 14:31:34 Lap200314 kernel: [14365.700715] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Mar 23 14:31:34 Lap200314 kernel: [14365.700723] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
Mar 23 14:31:34 Lap200314 kernel: [14365.700730] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
Mar 23 14:31:34 Lap200314 kernel: [14365.700737] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
Mar 23 14:31:34 Lap200314 kernel: [14365.700744] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
Mar 23 14:48:28 Lap200314 kernel: [14368.482931] PM: Syncing filesystems ... done.
Mar 23 14:48:28 Lap200314 kernel: [14368.624283] Freezing user space processes ... (elapsed 0.032 seconds) done.
Mar 23 14:48:28 Lap200314 kernel: [14368.656645] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
Mar 23 14:48:28 Lap200314 kernel: [14368.658285] Suspending console(s) (use no_console_suspend to debug)
Mar 23 14:48:28 Lap200314 kernel: [14368.658932] sd 0:0:0:0: [sda] Synchronizing SCSI cache
Mar 23 14:48:28 Lap200314 kernel: [14368.659964] sd 0:0:0:0: [sda] Stopping disk
Mar 23 14:48:28 Lap200314 kernel: [14369.292201] PM: suspend of devices complete after 633.525 msecs
Mar 23 14:48:28 Lap200314 kernel: [14369.292567] PM: late suspend of devices complete after 0.353 msecs
Mar 23 14:48:28 Lap200314 kernel: [14369.292826] pcieport 0000:00:1c.2: System wakeup enabled by ACPI
Mar 23 14:48:28 Lap200314 kernel: [14369.324246] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
Mar 23 14:48:28 Lap200314 kernel: [14369.340120] uhci_hcd 0000:00:1d.3: System wakeup enabled by ACPI
Mar 23 14:48:28 Lap200314 kernel: [14369.340204] uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI
Mar 23 14:48:28 Lap200314 kernel: [14369.340285] uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI
Mar 23 14:48:28 Lap200314 kernel: [14369.340366] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
Mar 23 14:48:28 Lap200314 kernel: [14369.340633] PM: noirq suspend of devices complete after 48.060 msecs
Mar 23 14:48:28 Lap200314 kernel: [14369.340681] ACPI: Preparing to enter system sleep state S3
Mar 23 14:48:28 Lap200314 kernel: [14369.340824] PM: Saving platform NVS memory
Mar 23 14:48:28 Lap200314 kernel: [14369.342149] Disabling non-boot CPUs ...
Mar 23 14:48:28 Lap200314 kernel: [14369.444033] smpboot: CPU 1 is now offline
Mar 23 14:48:28 Lap200314 kernel: [14369.444516] ACPI: Low-level resume complete
Mar 23 14:48:28 Lap200314 kernel: [14369.444516] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S0_] (20131115/hwxface-580)
Mar 23 14:48:28 Lap200314 kernel: [14369.444516] PM: Restoring platform NVS memory
Mar 23 14:48:28 Lap200314 kernel: [14369.444516] Enabling non-boot CPUs ...
Mar 23 14:48:28 Lap200314 kernel: [14369.444516] x86: Booting SMP configuration:
Mar 23 14:48:28 Lap200314 kernel: [14369.444516] smpboot: Booting Node 0 Processor 1 APIC 0x1
Mar 23 14:48:28 Lap200314 kernel: [14369.343798] Initializing CPU#1
Mar 23 14:48:28 Lap200314 kernel: [14369.343798] Disabled fast string operations
Mar 23 14:48:28 Lap200314 kernel: [14369.457128] CPU1 is up
Mar 23 14:48:28 Lap200314 kernel: [14369.457736] ACPI: Waking up from system sleep state S3
Mar 23 14:48:28 Lap200314 kernel: [14369.488483] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
Mar 23 14:48:28 Lap200314 kernel: [14369.488571] uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI
Mar 23 14:48:28 Lap200314 kernel: [14369.488656] uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI
Mar 23 14:48:28 Lap200314 kernel: [14369.488741] uhci_hcd 0000:00:1d.3: System wakeup disabled by ACPI
Mar 23 14:48:28 Lap200314 kernel: [14369.504126] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
Mar 23 14:48:28 Lap200314 kernel: [14369.552312] PM: noirq resume of devices complete after 94.371 msecs
Mar 23 14:48:28 Lap200314 kernel: [14369.552519] PM: early resume of devices complete after 0.170 msecs
Mar 23 14:48:28 Lap200314 kernel: [14369.553960] ath: phy0: ASPM enabled: 0x42
Mar 23 14:48:28 Lap200314 kernel: [14369.553989] pcieport 0000:00:1c.2: System wakeup disabled by ACPI
Mar 23 14:48:28 Lap200314 kernel: [14369.554899] usb usb2: root hub lost power or was reset
Mar 23 14:48:28 Lap200314 kernel: [14369.555252] usb usb3: root hub lost power or was reset
Mar 23 14:48:28 Lap200314 kernel: [14369.555590] usb usb4: root hub lost power or was reset
Mar 23 14:48:28 Lap200314 kernel: [14369.555913] usb usb5: root hub lost power or was reset
Mar 23 14:48:28 Lap200314 kernel: [14369.796235] usb 1-2: reset high-speed USB device number 3 using ehci-pci
Mar 23 14:48:28 Lap200314 kernel: [14369.880164] ata3: SATA link down (SStatus 0 SControl 300)
Mar 23 14:48:28 Lap200314 kernel: [14370.188235] usb 2-1: reset low-speed USB device number 2 using uhci_hcd
Mar 23 14:48:28 Lap200314 kernel: [14370.948162] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Mar 23 14:48:28 Lap200314 kernel: [14370.949627] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
Mar 23 14:48:28 Lap200314 kernel: [14370.964983] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
Mar 23 14:48:28 Lap200314 kernel: [14370.965536] ata1.00: configured for UDMA/133
Mar 23 14:48:28 Lap200314 kernel: [14370.980288] sd 0:0:0:0: [sda] Starting disk
Mar 23 14:48:28 Lap200314 kernel: [14370.996099] ACPI Error: [_T_0] Namespace lookup failure, AE_ALREADY_EXISTS (20131115/dswload2-330)
Mar 23 14:48:28 Lap200314 kernel: [14370.996107] ACPI Exception: AE_ALREADY_EXISTS, During name lookup/catalog (20131115/psobject-222)
Mar 23 14:48:28 Lap200314 kernel: [14370.996121] ACPI Error: Method parse/execution failed [\_SB_.PCI0.WMID.WMBA] (Node f7456b18), AE_ALREADY_EXISTS (20131115/psparse-536)
Mar 23 14:48:28 Lap200314 kernel: [14371.064581] ACPI: Marking method WMBA as Serialized because of AE_ALREADY_EXISTS error
Mar 23 14:48:28 Lap200314 kernel: [14371.064684] PM: resume of devices complete after 1512.156 msecs
Mar 23 14:48:28 Lap200314 kernel: [14371.065082] Restarting tasks ... done.
Mar 23 14:48:28 Lap200314 kernel: [14371.080480] video LNXVIDEO:00: Restoring backlight state
Mar 23 14:48:29 Lap200314 kernel: [14372.433168] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Mar 23 14:48:30 Lap200314 kernel: [14372.697373] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Mar 23 14:48:32 Lap200314 kernel: [14374.754380] wlan0: authenticate with 00:19:70:ab:b2:33
Mar 23 14:48:32 Lap200314 kernel: [14374.775997] wlan0: send auth to 00:19:70:ab:b2:33 (try 1/3)
Mar 23 14:48:32 Lap200314 kernel: [14374.779100] wlan0: authenticated
Mar 23 14:48:32 Lap200314 kernel: [14374.784144] wlan0: associate with 00:19:70:ab:b2:33 (try 1/3)
Mar 23 14:48:32 Lap200314 kernel: [14374.789954] wlan0: RX AssocResp from 00:19:70:ab:b2:33 (capab=0x431 status=0 aid=2)
Mar 23 14:48:32 Lap200314 kernel: [14374.790103] wlan0: associated
Mar 23 14:48:32 Lap200314 kernel: [14374.790207] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Mar 23 14:48:32 Lap200314 kernel: [14374.790533] cfg80211: Calling CRDA for country: NA
Mar 23 14:48:32 Lap200314 kernel: [14374.888752] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:19:70:ab:b2:33

Offline

 

#15  2014-03-23 15:38:47

  ArnVaker - Kapelusznik

ArnVaker
Kapelusznik
Skąd: Midgard
Zarejestrowany: 2009-05-06

Re: Dziwny plik

Arristo napisał(-a):

Przeczytałem tego "buga" ;) ale nie bardzo wiem jakie to ma odniesienie do mojej sytuacji.

Kod:

# fuser -V
fuser (PSmisc) 22.21

Kod:

# fuser -u /var/lib/dpkg/lock 
Specified filename /var/lib/dpkg/lock is not a mountpoint.

Jeśli coś wywołuje ten uwalony fuser na /var/lib/dpkg/lock, to taki jest efekt.

Arristo napisał(-a):

Skąd się wziął u mnie ten "nie punkt" ;) montowania

W sensie skąd się wziął ten plik? dpkg go tworzy.

Arristo napisał(-a):

i jak się go pozbyć?

Nie pozbywać się, ten plik jest potrzebny.

Offline

 

#16  2014-03-23 16:02:21

  Arristo - Użytkownik

Arristo
Użytkownik
Skąd: Zielona Góra
Zarejestrowany: 2014-02-20

Re: Dziwny plik

ArnVaker napisał(-a):

Jeśli coś wywołuje ten uwalony fuser na /var/lib/dpkg/lock, to taki jest efekt.

To znaczy, że przyczyna leży po stronie tego "uwalonego fusera"?

Napisałem ten wątek, gdyż miałem wrażenie, że tuż po instalacji tego przystanku

Kod:

Specified filename /var/lib/dpkg/lock is not a mountpoint.

nie było.

Nie wiem skąd to się wzięło i jak się tego pozbyć.
Wiem tylko, że to jest potrzebny plik systemowy i po wykasowaniu jest odtwarzany przez system .

Offline

 

#17  2014-03-23 16:06:46

  ilin - Palacz

ilin
Palacz
Skąd: PRLu
Zarejestrowany: 2006-05-03

Re: Dziwny plik

W tych logach nic nie ma.

Moze cos wiecej o tym komunikacie.
Poprzedzającą linię .

Problemy rozwiązujemy na forum nie na PW -> Niech inni na tym skorzystają.
Polski portal Debiana

Offline

 

#18  2014-03-23 16:07:50

  ArnVaker - Kapelusznik

ArnVaker
Kapelusznik
Skąd: Midgard
Zarejestrowany: 2009-05-06

Re: Dziwny plik

Jeśli w ogóle to jest dobry trop, to tutaj muszą być dwa warunki spełnione: musisz mieć zainstalowany ten uwalony fuser oraz mieć w systemie coś co wywołuje go na /var/lib/dpkg/lock podczas startu.

Co do pierwszego:

Kod:

apt-cache policy psmisc

Co do drugiego: sprawdziłem u siebie na tym uwalonym fuser i u mnie nic go nie wywołuje podczas startu systemu. Co tam wyżej u Ciebie jest nad tym komunikatem? Niżej w sumie też może trafić się coś przydatnego.

Offline

 

#19  2014-03-23 16:46:44

  Arristo - Użytkownik

Arristo
Użytkownik
Skąd: Zielona Góra
Zarejestrowany: 2014-02-20

Re: Dziwny plik

ArnVaker napisał(-a):

Jeśli w ogóle to jest dobry trop, to tutaj muszą być dwa warunki spełnione: musisz mieć zainstalowany ten uwalony fuser oraz mieć w systemie coś co wywołuje go na /var/lib/dpkg/lock podczas startu.

Co do pierwszego:

Kod:

apt-cache policy psmisc

Co do drugiego: sprawdziłem u siebie na tym uwalonym fuser i u mnie nic go nie wywołuje podczas startu systemu. Co tam wyżej u Ciebie jest nad tym komunikatem? Niżej w sumie też może trafić się coś przydatnego.

Kod:

# apt-cache policy psmisc
psmisc:
  Zainstalowana: 22.21-1
  Kandydująca:   22.21-1
  Tabela wersji:
 *** 22.21-1 0
        500 http://ftp.pl.debian.org/debian/ jessie/main i386 Packages
        100 /var/lib/dpkg/status

A jeśli chodzi o to co się pojawia przed i po tym komunikacie, to przed startuje clamav demon, a po cups demon. Wiem, że  ten clamav może wywołać uśmiech, ale staram się chronić windowsową brać z którą koresponduję przed przesłaniem im jakiegoś zakażonego badziewia.
To co dla mnie nie stanowi zagrożenia, może zagrozić jednak innym.

Ostatnio edytowany przez Arristo (2014-03-23 17:00:57)

Offline

 

#20  2014-03-23 16:49:25

  ArnVaker - Kapelusznik

ArnVaker
Kapelusznik
Skąd: Midgard
Zarejestrowany: 2009-05-06

Re: Dziwny plik

Co do psmisc, możesz sprawdzić:

Kod:

cd /tmp/
wget http://snapshot.debian.org/archive/debian/20120920T153558Z/pool/main/p/psmisc/psmisc_22.20-1_i386.deb
dpkg -i psmisc_22.20-1_i386.deb

W ogóle fajnie jakbyś się odnosił do wszystkich wypowiedzi, a nie jedynie do niektórych. :)

Offline

 

#21  2014-03-23 17:13:43

  Arristo - Użytkownik

Arristo
Użytkownik
Skąd: Zielona Góra
Zarejestrowany: 2014-02-20

Re: Dziwny plik

ArnVaker napisał(-a):

W ogóle fajnie jakbyś się odnosił do wszystkich wypowiedzi, a nie jedynie do niektórych. :)

OK :) masz rację ale jestem bardzo wdzięczny za każdą podpowiedź i dlatego staram się na nie reagować.

A co do  tematu, to zainstalowałem co podałeś, czyli psmisc_22.20-1_i386.deb i co mam dalej zrobić?

Offline

 

#22  2014-03-23 17:15:32

  ArnVaker - Kapelusznik

ArnVaker
Kapelusznik
Skąd: Midgard
Zarejestrowany: 2009-05-06

Re: Dziwny plik

Arristo napisał(-a):

OK :) masz rację ale jestem bardzo wdzięczny za każdą podpowiedź i dlatego staram się na nie reagować.

Chodziło mi właśnie o to, że niektóre pomijasz. ;)

Arristo napisał(-a):

A co do  tematu, to zainstalowałem co podałeś, czyli psmisc_22.20-1_i386.deb i co mam dalej zrobić?

Restart i sprawdzić czy dalej będzie ten komunikat. Jeżeli tak, to trzeba będzie jakoś zlokalizować co konkretnie go wywołuje.

EDIT: Jeszcze dla pewności sprawdź czy siedzi ta starsza wersja teraz:

Kod:

apt-cache policy psmisc

Offline

 

#23  2014-03-23 17:29:55

  Arristo - Użytkownik

Arristo
Użytkownik
Skąd: Zielona Góra
Zarejestrowany: 2014-02-20

Re: Dziwny plik

To jest po restarcie i aktualizacji psmisc

Kod:

# apt-cache policy psmisc
psmisc:
  Zainstalowana: 22.21-1
  Kandydująca:   22.21-1
  Tabela wersji:
 *** 22.21-1 0
        500 http://ftp.pl.debian.org/debian/ jessie/main i386 Packages
        100 /var/lib/dpkg/status

A co restartu, to go zrobiłem i komunikat już się nie nie pojawił, ale zatrzymał się na dłużej przy cups

Po wejściu na moje konto okazało się że psmisc jest do aktualizacji, więc ją wykonałem i... znowu pojawił mi się ten komunikat przy kolejnym restarcie.

Ostatnio edytowany przez Arristo (2014-03-23 17:45:54)

Offline

 

#24  2014-03-23 17:49:30

  ArnVaker - Kapelusznik

ArnVaker
Kapelusznik
Skąd: Midgard
Zarejestrowany: 2009-05-06

Re: Dziwny plik

Zainstalowałeś poprawnie działającą wersję psmisc i komunikat zniknął, zaktualizowałeś ponownie do uwalonej i komunikat wrócił. Chyba jasne? :)

Czasem wcześniej nie wisiał też na cups, a nie na tym komunikacie? Masz w ogóle drukarkę?

Offline

 

#25  2014-03-23 17:53:25

  Arristo - Użytkownik

Arristo
Użytkownik
Skąd: Zielona Góra
Zarejestrowany: 2014-02-20

Re: Dziwny plik

Debiana mam na laptopie i czasem podłączam go do drukarki, a bezpośrednio po instalacji systemu nie wisiał ani na cups ani na niczym innym -szybko się ładował.

A co do naszej paczki o imieniu psmisc, to chyba nic nie pozostaje innego jak czekać na jej kolejną aktualizację?

Ostatnio edytowany przez Arristo (2014-03-23 17:56:16)

Offline

 

 

Strony: 1 2 ▶

Stopka forum

Powered by PunBB
© Copyright 2002–2005 Rickard Andersson
To nie jest tylko forum, to nasza mała ojczyzna ;-)