Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!
Ogłoszenie
Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.
- Forum Debian Users Gang
- » Instalacja i podstawowa konfiguracja
- » Problem z ustawieniem natywnej rozdzielczości monitora Benq G925 HDA
#26 2013-01-05 17:45:16
Shiny - 
Użytkownik
- Shiny
- Użytkownik
- Skąd: Poland
- Zarejestrowany: 2013-01-05
Re: Problem z ustawieniem natywnej rozdzielczości monitora Benq G925 HDA
Z tego co próbuję w internecie "wygenerować" własny "modeline", zazwyczaj zmienia się rozdzielczość albo na 1360, albo na 1368, a jedyny poprawny, który na dodatek jest przystosowany do tego monitora i który próbuję dodać do xorg.conf:
Kod:
ModeLine "1366x768" 85.5 1366 1436 1579 1792 768 771 774 798 +hsync +vsync
powoduje, że Linux się nie uruchamia. Wyłączenie EDID również nic nie daje. Co najśmieszniejsze, bez sterowników od nVidii wszystko jest okej.
Tak więc myślę, że może Wheezy będzie dużo lepszym kandydatem, niż Squeeze, choć bardziej wydaje mi się, że to wina sterowników.
Ostatnio edytowany przez Shiny (2013-01-05 17:45:55)
Offline
#27 2013-01-05 17:56:13
ArnVaker - Kapelusznik
- ArnVaker
- Kapelusznik
- Skąd: Midgard
- Zarejestrowany: 2009-05-06
Re: Problem z ustawieniem natywnej rozdzielczości monitora Benq G925 HDA
Na to wygląda. Najnowsze zamknięte sterowniki oficjalnie obsługujące tę kartę to aktualnie 304.64, można jeszcze obadać, a nuż coś poprawili.
Offline
#28 2013-01-05 22:39:12
Shiny - Użytkownik
- Shiny
- Użytkownik
- Skąd: Poland
- Zarejestrowany: 2013-01-05
Re: Problem z ustawieniem natywnej rozdzielczości monitora Benq G925 HDA
No cóż, ściągnąłem ostatnią możliwą wersję Debiana, tym razem Wheezy. Zainstalowałem, zdziwiłem się od razu, bo nowy interfejs jest bardzo ładny, a przede wszystkim szybki. Tylko że... no chciałbym jednak zainstalować sterowniki nVidii ale tak, żeby nie uwalić przy tym całego systemu, czy muszę na "Wheezy'm" zrobić to inaczej niż na "Squeeze", czy tak samo jak tutaj?
Ostatnio edytowany przez Shiny (2013-01-05 22:39:57)
Offline
#29 2013-01-05 22:50:56
ArnVaker - Kapelusznik
- ArnVaker
- Kapelusznik
- Skąd: Midgard
- Zarejestrowany: 2009-05-06
Re: Problem z ustawieniem natywnej rozdzielczości monitora Benq G925 HDA
Shiny napisał(-a):
Zainstalowałem, zdziwiłem się od razu, bo nowy interfejs jest bardzo ładny, a przede wszystkim szybki.
Tak z ciekawości: masz na myśli GNOME, KDE, czy jeszcze coś innego?
Shiny napisał(-a):
Tylko że... no chciałbym jednak zainstalować sterowniki nVidii ale tak, żeby nie uwalić przy tym całego systemu, czy muszę na "Wheezy'm" zrobić to inaczej niż na "Squeeze", czy tak samo jak tutaj?
Ciężko powiedzieć… Zainstaluj normalnie i zobacz co będzie. ;) Ten poradnik to dopiero jeśli znowu będą jakieś problemy.
Offline
#30 2013-01-05 23:02:53
Shiny - Użytkownik
- Shiny
- Użytkownik
- Skąd: Poland
- Zarejestrowany: 2013-01-05
Re: Problem z ustawieniem natywnej rozdzielczości monitora Benq G925 HDA
Co do interfejsu, to mam na myśli GNOME, do KDE nie potrafię się przyzwyczaić. A co do normalnej instalacji to z chęcią, ale w Synaptic'u widzę tylko "nvidia-alternative-legacy-173xx", nie wiem czy to to, lecz jeśli znów się wysypią sterowniki, lub rozdzielczość zeświruje, najwyżej tutaj odpiszę.
Offline
#31 2013-01-05 23:47:34
ArnVaker - Kapelusznik
- ArnVaker
- Kapelusznik
- Skąd: Midgard
- Zarejestrowany: 2009-05-06
Re: Problem z ustawieniem natywnej rozdzielczości monitora Benq G925 HDA
E tam Synaptic, „normalnie” znaczy z wiersza poleceń: http://dug.net.pl/tekst/142/ ;)
Offline
#32 2013-01-06 19:46:58
Shiny - Użytkownik
- Shiny
- Użytkownik
- Skąd: Poland
- Zarejestrowany: 2013-01-05
Re: Problem z ustawieniem natywnej rozdzielczości monitora Benq G925 HDA
No cóż, zrobiłem więc tak, jak to było napisane w tym poradniku... i po instalacji sterowników 173 znów mam nieprawidłową rozdzielczość. Tylko tym razem Debian włącza się w rozdzielczości 1152x720, a swojej rozdzielczości (1366x768) znów wybrać nie mogę, tylko 1360x768... Xorg.conf:
Kod:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 304.48 (buildd@murphy) Wed Sep 12 11:32:28 UTC 2012
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
Option "metamodes" "1366x768_60"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSectionLogi:
Kod:
[ 27.574]
X.Org X Server 1.12.4
Release Date: 2012-08-27
[ 27.574] X Protocol Version 11, Revision 0
[ 27.574] Build Operating System: Linux 2.6.32-5-amd64 i686 Debian
[ 27.574] Current Operating System: Linux user31-231 3.2.0-4-686-pae #1 SMP Debian 3.2.35-2 i686
[ 27.574] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-686-pae root=UUID=fa3a2ec7-1f4d-46a0-8866-9d5e295cd786 ro quiet
[ 27.574] Build Date: 29 November 2012 08:52:43PM
[ 27.574] xorg-server 2:1.12.4-4 (Julien Cristau <jcristau@debian.org>)
[ 27.574] Current version of pixman: 0.26.0
[ 27.574] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 27.574] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 27.574] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Jan 6 19:41:01 2013
[ 27.653] (==) Using config file: "/etc/X11/xorg.conf"
[ 27.653] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 27.703] (==) ServerLayout "Layout0"
[ 27.703] (**) |-->Screen "Screen0" (0)
[ 27.703] (**) | |-->Monitor "Monitor0"
[ 27.716] (**) | |-->Device "Device0"
[ 27.716] (**) |-->Input Device "Keyboard0"
[ 27.716] (**) |-->Input Device "Mouse0"
[ 27.716] (==) Automatically adding devices
[ 27.716] (==) Automatically enabling devices
[ 27.775] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 27.775] Entry deleted from font path.
[ 27.821] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[ 27.821] Entry deleted from font path.
[ 27.821] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 27.822] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 27.822] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 27.822] (WW) Disabling Keyboard0
[ 27.822] (WW) Disabling Mouse0
[ 27.822] (II) Loader magic: 0xb77075a0
[ 27.822] (II) Module ABI versions:
[ 27.822] X.Org ANSI C Emulation: 0.4
[ 27.822] X.Org Video Driver: 12.1
[ 27.822] X.Org XInput driver : 16.0
[ 27.822] X.Org Server Extension : 6.0
[ 27.823] (--) PCI:*(0:1:0:0) 10de:00f1:1682:2119 rev 162, Mem @ 0xfa000000/16777216, 0xe0000000/268435456, 0xfb000000/16777216, BIOS @ 0x????????/131072
[ 27.823] (II) Open ACPI successful (/var/run/acpid.socket)
[ 27.823] (II) LoadModule: "extmod"
[ 28.002] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 28.017] (II) Module extmod: vendor="X.Org Foundation"
[ 28.017] compiled for 1.12.4, module version = 1.0.0
[ 28.017] Module class: X.Org Server Extension
[ 28.017] ABI class: X.Org Server Extension, version 6.0
[ 28.017] (II) Loading extension SELinux
[ 28.018] (II) Loading extension MIT-SCREEN-SAVER
[ 28.018] (II) Loading extension XFree86-VidModeExtension
[ 28.018] (II) Loading extension XFree86-DGA
[ 28.018] (II) Loading extension DPMS
[ 28.018] (II) Loading extension XVideo
[ 28.018] (II) Loading extension XVideo-MotionCompensation
[ 28.018] (II) Loading extension X-Resource
[ 28.018] (II) LoadModule: "dbe"
[ 28.018] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 28.034] (II) Module dbe: vendor="X.Org Foundation"
[ 28.034] compiled for 1.12.4, module version = 1.0.0
[ 28.034] Module class: X.Org Server Extension
[ 28.034] ABI class: X.Org Server Extension, version 6.0
[ 28.034] (II) Loading extension DOUBLE-BUFFER
[ 28.034] (II) LoadModule: "glx"
[ 28.034] (II) Loading /usr/lib/xorg/modules/linux/libglx.so
[ 28.631] (II) Module glx: vendor="NVIDIA Corporation"
[ 28.631] compiled for 4.0.2, module version = 1.0.0
[ 28.631] Module class: X.Org Server Extension
[ 28.631] (II) NVIDIA GLX Module 173.14.35 Thu May 31 12:34:02 PDT 2012
[ 28.631] (II) Loading extension GLX
[ 28.631] (II) LoadModule: "record"
[ 28.632] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 28.643] (II) Module record: vendor="X.Org Foundation"
[ 28.643] compiled for 1.12.4, module version = 1.13.0
[ 28.643] Module class: X.Org Server Extension
[ 28.643] ABI class: X.Org Server Extension, version 6.0
[ 28.643] (II) Loading extension RECORD
[ 28.643] (II) LoadModule: "dri"
[ 28.644] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 28.656] (II) Module dri: vendor="X.Org Foundation"
[ 28.656] compiled for 1.12.4, module version = 1.0.0
[ 28.656] ABI class: X.Org Server Extension, version 6.0
[ 28.656] (II) Loading extension XFree86-DRI
[ 28.656] (II) LoadModule: "dri2"
[ 28.657] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 28.658] (II) Module dri2: vendor="X.Org Foundation"
[ 28.658] compiled for 1.12.4, module version = 1.2.0
[ 28.658] ABI class: X.Org Server Extension, version 6.0
[ 28.658] (II) Loading extension DRI2
[ 28.658] (II) LoadModule: "nvidia"
[ 28.658] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 28.718] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 28.718] compiled for 4.0.2, module version = 1.0.0
[ 28.718] Module class: X.Org Video Driver
[ 28.752] (II) NVIDIA dlloader X Driver 173.14.35 Thu May 31 12:10:59 PDT 2012
[ 28.752] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 28.752] (++) using VT number 7
[ 28.785] (II) Loading sub module "fb"
[ 28.785] (II) LoadModule: "fb"
[ 28.786] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 28.797] (II) Module fb: vendor="X.Org Foundation"
[ 28.797] compiled for 1.12.4, module version = 1.0.0
[ 28.797] ABI class: X.Org ANSI C Emulation, version 0.4
[ 28.797] (II) Loading sub module "wfb"
[ 28.797] (II) LoadModule: "wfb"
[ 28.797] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 28.804] (II) Module wfb: vendor="X.Org Foundation"
[ 28.804] compiled for 1.12.4, module version = 1.0.0
[ 28.804] ABI class: X.Org ANSI C Emulation, version 0.4
[ 28.804] (II) Loading sub module "ramdac"
[ 28.804] (II) LoadModule: "ramdac"
[ 28.804] (II) Module "ramdac" already built-in
[ 28.812] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 28.812] (==) NVIDIA(0): RGB weight 888
[ 28.812] (==) NVIDIA(0): Default visual is TrueColor
[ 28.812] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 28.812] (**) NVIDIA(0): Option "MetaModes" "1366x768_60"
[ 28.815] (**) NVIDIA(0): Enabling RENDER acceleration
[ 28.815] (II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
[ 28.815] (II) NVIDIA(0): enabled.
[ 31.170] (II) NVIDIA(0): NVIDIA GPU GeForce 6600 GT (NV43) at PCI:1:0:0 (GPU-0)
[ 31.170] (--) NVIDIA(0): Memory: 131072 kBytes
[ 31.170] (--) NVIDIA(0): VideoBIOS: 05.43.02.36.00
[ 31.170] (II) NVIDIA(0): Detected AGP rate: 8X
[ 31.170] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 31.170] (--) NVIDIA(0): Connected display device(s) on GeForce 6600 GT at PCI:1:0:0:
[ 31.170] (--) NVIDIA(0): BenQ G925HDA (CRT-0)
[ 31.170] (--) NVIDIA(0): BenQ G925HDA (CRT-0): 400.0 MHz maximum pixel clock
[ 31.171] (II) NVIDIA(0): Assigned Display Device: CRT-0
[ 31.171] (WW) NVIDIA(0): No valid modes for "1366x768_60"; removing.
[ 31.171] (WW) NVIDIA(0):
[ 31.171] (WW) NVIDIA(0): Unable to validate any modes; falling back to the default mode
[ 31.171] (WW) NVIDIA(0): "nvidia-auto-select".
[ 31.171] (WW) NVIDIA(0):
[ 31.171] (II) NVIDIA(0): Validated modes:
[ 31.171] (II) NVIDIA(0): "nvidia-auto-select"
[ 31.171] (II) NVIDIA(0): Virtual screen size determined to be 1152 x 720
[ 31.172] (--) NVIDIA(0): DPI set to (71, 79); computed from "UseEdidDpi" X config
[ 31.172] (--) NVIDIA(0): option
[ 31.172] (==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
[ 31.172] (--) Depth 24 pixmap format is 32 bpp
[ 31.175] (II) NVIDIA(0): Initialized AGP GART.
[ 31.179] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[ 31.322] (II) Loading extension NV-GLX
[ 31.355] (II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
[ 31.383] (II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
[ 31.383] (==) NVIDIA(0): Backing store disabled
[ 31.383] (==) NVIDIA(0): Silken mouse enabled
[ 31.384] (**) NVIDIA(0): DPMS enabled
[ 31.384] (II) Loading extension NV-CONTROL
[ 31.385] (==) RandR enabled
[ 31.385] (II) Initializing built-in extension Generic Event Extension
[ 31.385] (II) Initializing built-in extension SHAPE
[ 31.385] (II) Initializing built-in extension MIT-SHM
[ 31.385] (II) Initializing built-in extension XInputExtension
[ 31.385] (II) Initializing built-in extension XTEST
[ 31.385] (II) Initializing built-in extension BIG-REQUESTS
[ 31.385] (II) Initializing built-in extension SYNC
[ 31.385] (II) Initializing built-in extension XKEYBOARD
[ 31.385] (II) Initializing built-in extension XC-MISC
[ 31.385] (II) Initializing built-in extension SECURITY
[ 31.385] (II) Initializing built-in extension XINERAMA
[ 31.385] (II) Initializing built-in extension XFIXES
[ 31.385] (II) Initializing built-in extension RENDER
[ 31.385] (II) Initializing built-in extension RANDR
[ 31.385] (II) Initializing built-in extension COMPOSITE
[ 31.385] (II) Initializing built-in extension DAMAGE
[ 31.385] (II) SELinux: Disabled on system
[ 31.390] (II) Initializing extension GLX
[ 31.731] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 31.731] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 31.731] (II) LoadModule: "evdev"
[ 31.732] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 31.745] (II) Module evdev: vendor="X.Org Foundation"
[ 31.745] compiled for 1.12.1, module version = 2.7.0
[ 31.745] Module class: X.Org XInput Driver
[ 31.745] ABI class: X.Org XInput driver, version 16.0
[ 31.745] (II) Using input driver 'evdev' for 'Power Button'
[ 31.745] (**) Power Button: always reports core events
[ 31.745] (**) evdev: Power Button: Device: "/dev/input/event5"
[ 31.745] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 31.745] (--) evdev: Power Button: Found keys
[ 31.745] (II) evdev: Power Button: Configuring as keyboard
[ 31.745] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5"
[ 31.745] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 31.745] (**) Option "xkb_rules" "evdev"
[ 31.745] (**) Option "xkb_model" "pc105"
[ 31.745] (**) Option "xkb_layout" "pl"
[ 31.795] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 31.795] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 31.795] (II) Using input driver 'evdev' for 'Power Button'
[ 31.795] (**) Power Button: always reports core events
[ 31.795] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 31.795] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 31.795] (--) evdev: Power Button: Found keys
[ 31.795] (II) evdev: Power Button: Configuring as keyboard
[ 31.795] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3/event3"
[ 31.795] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 31.795] (**) Option "xkb_rules" "evdev"
[ 31.795] (**) Option "xkb_model" "pc105"
[ 31.795] (**) Option "xkb_layout" "pl"
[ 31.796] (II) config/udev: Adding input device Sleep Button (/dev/input/event4)
[ 31.796] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 31.796] (II) Using input driver 'evdev' for 'Sleep Button'
[ 31.796] (**) Sleep Button: always reports core events
[ 31.797] (**) evdev: Sleep Button: Device: "/dev/input/event4"
[ 31.797] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 31.797] (--) evdev: Sleep Button: Found keys
[ 31.797] (II) evdev: Sleep Button: Configuring as keyboard
[ 31.797] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4/event4"
[ 31.797] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 31.797] (**) Option "xkb_rules" "evdev"
[ 31.797] (**) Option "xkb_model" "pc105"
[ 31.797] (**) Option "xkb_layout" "pl"
[ 31.798] (II) config/udev: Adding input device USB USB Keykoard (/dev/input/event0)
[ 31.798] (**) USB USB Keykoard: Applying InputClass "evdev keyboard catchall"
[ 31.798] (II) Using input driver 'evdev' for 'USB USB Keykoard'
[ 31.798] (**) USB USB Keykoard: always reports core events
[ 31.798] (**) evdev: USB USB Keykoard: Device: "/dev/input/event0"
[ 31.798] (--) evdev: USB USB Keykoard: Vendor 0x1a2c Product 0x23
[ 31.798] (--) evdev: USB USB Keykoard: Found keys
[ 31.798] (II) evdev: USB USB Keykoard: Configuring as keyboard
[ 31.798] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.0/usb2/2-1/2-1:1.0/input/input0/event0"
[ 31.798] (II) XINPUT: Adding extended input device "USB USB Keykoard" (type: KEYBOARD, id 9)
[ 31.798] (**) Option "xkb_rules" "evdev"
[ 31.798] (**) Option "xkb_model" "pc105"
[ 31.798] (**) Option "xkb_layout" "pl"
[ 31.799] (II) config/udev: Adding input device USB USB Keykoard (/dev/input/event1)
[ 31.799] (**) USB USB Keykoard: Applying InputClass "evdev keyboard catchall"
[ 31.799] (II) Using input driver 'evdev' for 'USB USB Keykoard'
[ 31.799] (**) USB USB Keykoard: always reports core events
[ 31.799] (**) evdev: USB USB Keykoard: Device: "/dev/input/event1"
[ 31.799] (--) evdev: USB USB Keykoard: Vendor 0x1a2c Product 0x23
[ 31.800] (--) evdev: USB USB Keykoard: Found 1 mouse buttons
[ 31.800] (--) evdev: USB USB Keykoard: Found scroll wheel(s)
[ 31.800] (--) evdev: USB USB Keykoard: Found relative axes
[ 31.800] (II) evdev: USB USB Keykoard: Forcing relative x/y axes to exist.
[ 31.800] (--) evdev: USB USB Keykoard: Found absolute axes
[ 31.800] (II) evdev: USB USB Keykoard: Forcing absolute x/y axes to exist.
[ 31.800] (--) evdev: USB USB Keykoard: Found keys
[ 31.800] (II) evdev: USB USB Keykoard: Configuring as mouse
[ 31.800] (II) evdev: USB USB Keykoard: Configuring as keyboard
[ 31.800] (II) evdev: USB USB Keykoard: Adding scrollwheel support
[ 31.800] (**) evdev: USB USB Keykoard: YAxisMapping: buttons 4 and 5
[ 31.800] (**) evdev: USB USB Keykoard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 31.800] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.0/usb2/2-1/2-1:1.1/input/input1/event1"
[ 31.800] (II) XINPUT: Adding extended input device "USB USB Keykoard" (type: KEYBOARD, id 10)
[ 31.800] (**) Option "xkb_rules" "evdev"
[ 31.800] (**) Option "xkb_model" "pc105"
[ 31.800] (**) Option "xkb_layout" "pl"
[ 31.800] (II) evdev: USB USB Keykoard: initialized for relative axes.
[ 31.800] (WW) evdev: USB USB Keykoard: ignoring absolute axes.
[ 31.801] (**) USB USB Keykoard: (accel) keeping acceleration scheme 1
[ 31.801] (**) USB USB Keykoard: (accel) acceleration profile 0
[ 31.801] (**) USB USB Keykoard: (accel) acceleration factor: 2.000
[ 31.801] (**) USB USB Keykoard: (accel) acceleration threshold: 4
[ 31.802] (II) config/udev: Adding input device USB Mouse (/dev/input/event2)
[ 31.802] (**) USB Mouse : Applying InputClass "evdev pointer catchall"
[ 31.802] (II) Using input driver 'evdev' for 'USB Mouse '
[ 31.802] (**) USB Mouse : always reports core events
[ 31.802] (**) evdev: USB Mouse : Device: "/dev/input/event2"
[ 31.802] (--) evdev: USB Mouse : Vendor 0x5e3 Product 0x1205
[ 31.802] (--) evdev: USB Mouse : Found 9 mouse buttons
[ 31.802] (--) evdev: USB Mouse : Found scroll wheel(s)
[ 31.802] (--) evdev: USB Mouse : Found relative axes
[ 31.802] (--) evdev: USB Mouse : Found x and y relative axes
[ 31.802] (II) evdev: USB Mouse : Configuring as mouse
[ 31.802] (II) evdev: USB Mouse : Adding scrollwheel support
[ 31.802] (**) evdev: USB Mouse : YAxisMapping: buttons 4 and 5
[ 31.802] (**) evdev: USB Mouse : EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 31.802] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2:1.0/input/input2/event2"
[ 31.802] (II) XINPUT: Adding extended input device "USB Mouse " (type: MOUSE, id 11)
[ 31.802] (II) evdev: USB Mouse : initialized for relative axes.
[ 31.802] (**) USB Mouse : (accel) keeping acceleration scheme 1
[ 31.802] (**) USB Mouse : (accel) acceleration profile 0
[ 31.802] (**) USB Mouse : (accel) acceleration factor: 2.000
[ 31.802] (**) USB Mouse : (accel) acceleration threshold: 4
[ 31.803] (II) config/udev: Adding input device USB Mouse (/dev/input/mouse0)
[ 31.803] (II) No input driver specified, ignoring this device.
[ 31.803] (II) This device may have been added with another device file.
[ 31.804] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 31.804] (II) No input driver specified, ignoring this device.
[ 31.804] (II) This device may have been added with another device file.
[ 106.963] (II) NVIDIA(0): Setting mode "CRT-0:1360x768@1360x768+0+0"Offline
#33 2013-01-06 20:09:31
ArnVaker - Kapelusznik
- ArnVaker
- Kapelusznik
- Skąd: Midgard
- Zarejestrowany: 2009-05-06
Re: Problem z ustawieniem natywnej rozdzielczości monitora Benq G925 HDA
173? A dlaczego 173?
Offline
#34 2013-01-06 20:29:38
Shiny - Użytkownik
- Shiny
- Użytkownik
- Skąd: Poland
- Zarejestrowany: 2013-01-05
Re: Problem z ustawieniem natywnej rozdzielczości monitora Benq G925 HDA
Z własnej głupoty i przyzwyczajenia, ale już "naprawiłem" ten błąd i zainstalowałem najnowszą wersję (usuwając rzecz jasna starą wersję poleceniem "aptitude purge '?installed nvidia'
" oraz usuwając xorga poleceniem "rm /etc/X11/xorg.conf"), która tym razem twierdzi, że nominalna rozdzielczość monitora to 1368x768, a logi twierdzą, że:
Kod:
[ 27.734]
X.Org X Server 1.12.4
Release Date: 2012-08-27
[ 27.734] X Protocol Version 11, Revision 0
[ 27.734] Build Operating System: Linux 2.6.32-5-amd64 i686 Debian
[ 27.734] Current Operating System: Linux user31-231 3.2.0-4-686-pae #1 SMP Debian 3.2.35-2 i686
[ 27.734] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-686-pae root=UUID=fa3a2ec7-1f4d-46a0-8866-9d5e295cd786 ro quiet
[ 27.734] Build Date: 29 November 2012 08:52:43PM
[ 27.734] xorg-server 2:1.12.4-4 (Julien Cristau <jcristau@debian.org>)
[ 27.734] Current version of pixman: 0.26.0
[ 27.734] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 27.734] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 27.734] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Jan 6 20:27:39 2013
[ 27.754] (==) Using config file: "/etc/X11/xorg.conf"
[ 27.754] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 27.780] (==) ServerLayout "Layout0"
[ 27.780] (**) |-->Screen "Screen0" (0)
[ 27.780] (**) | |-->Monitor "Monitor0"
[ 27.792] (**) | |-->Device "Device0"
[ 27.792] (**) |-->Input Device "Keyboard0"
[ 27.793] (**) |-->Input Device "Mouse0"
[ 27.793] (==) Automatically adding devices
[ 27.793] (==) Automatically enabling devices
[ 27.827] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 27.827] Entry deleted from font path.
[ 27.856] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[ 27.856] Entry deleted from font path.
[ 27.856] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 27.857] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 27.857] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 27.857] (WW) Disabling Keyboard0
[ 27.857] (WW) Disabling Mouse0
[ 27.857] (II) Loader magic: 0xb770d5a0
[ 27.857] (II) Module ABI versions:
[ 27.857] X.Org ANSI C Emulation: 0.4
[ 27.857] X.Org Video Driver: 12.1
[ 27.857] X.Org XInput driver : 16.0
[ 27.857] X.Org Server Extension : 6.0
[ 27.858] (--) PCI:*(0:1:0:0) 10de:00f1:1682:2119 rev 162, Mem @ 0xfa000000/16777216, 0xe0000000/268435456, 0xfb000000/16777216, BIOS @ 0x????????/131072
[ 27.858] (II) Open ACPI successful (/var/run/acpid.socket)
[ 27.858] (II) LoadModule: "extmod"
[ 27.979] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 27.994] (II) Module extmod: vendor="X.Org Foundation"
[ 27.994] compiled for 1.12.4, module version = 1.0.0
[ 27.994] Module class: X.Org Server Extension
[ 27.994] ABI class: X.Org Server Extension, version 6.0
[ 27.994] (II) Loading extension SELinux
[ 27.994] (II) Loading extension MIT-SCREEN-SAVER
[ 27.994] (II) Loading extension XFree86-VidModeExtension
[ 27.994] (II) Loading extension XFree86-DGA
[ 27.994] (II) Loading extension DPMS
[ 27.994] (II) Loading extension XVideo
[ 27.994] (II) Loading extension XVideo-MotionCompensation
[ 27.994] (II) Loading extension X-Resource
[ 27.994] (II) LoadModule: "dbe"
[ 27.995] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 28.011] (II) Module dbe: vendor="X.Org Foundation"
[ 28.011] compiled for 1.12.4, module version = 1.0.0
[ 28.011] Module class: X.Org Server Extension
[ 28.011] ABI class: X.Org Server Extension, version 6.0
[ 28.011] (II) Loading extension DOUBLE-BUFFER
[ 28.011] (II) LoadModule: "glx"
[ 28.011] (II) Loading /usr/lib/xorg/modules/linux/libglx.so
[ 29.462] (II) Module glx: vendor="NVIDIA Corporation"
[ 29.462] compiled for 4.0.2, module version = 1.0.0
[ 29.462] Module class: X.Org Server Extension
[ 29.462] (II) NVIDIA GLX Module 304.64 Tue Oct 30 11:31:18 PDT 2012
[ 29.462] (II) Loading extension GLX
[ 29.462] (II) LoadModule: "record"
[ 29.463] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 29.520] (II) Module record: vendor="X.Org Foundation"
[ 29.520] compiled for 1.12.4, module version = 1.13.0
[ 29.520] Module class: X.Org Server Extension
[ 29.520] ABI class: X.Org Server Extension, version 6.0
[ 29.520] (II) Loading extension RECORD
[ 29.520] (II) LoadModule: "dri"
[ 29.520] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 29.533] (II) Module dri: vendor="X.Org Foundation"
[ 29.533] compiled for 1.12.4, module version = 1.0.0
[ 29.533] ABI class: X.Org Server Extension, version 6.0
[ 29.533] (II) Loading extension XFree86-DRI
[ 29.533] (II) LoadModule: "dri2"
[ 29.533] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 29.534] (II) Module dri2: vendor="X.Org Foundation"
[ 29.534] compiled for 1.12.4, module version = 1.2.0
[ 29.534] ABI class: X.Org Server Extension, version 6.0
[ 29.534] (II) Loading extension DRI2
[ 29.534] (II) LoadModule: "nvidia"
[ 29.535] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 29.609] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 29.609] compiled for 4.0.2, module version = 1.0.0
[ 29.609] Module class: X.Org Video Driver
[ 29.913] (II) NVIDIA dlloader X Driver 304.64 Tue Oct 30 11:11:05 PDT 2012
[ 29.913] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 29.945] (++) using VT number 7
[ 29.987] (II) Loading sub module "fb"
[ 29.987] (II) LoadModule: "fb"
[ 29.988] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 30.014] (II) Module fb: vendor="X.Org Foundation"
[ 30.014] compiled for 1.12.4, module version = 1.0.0
[ 30.014] ABI class: X.Org ANSI C Emulation, version 0.4
[ 30.014] (II) Loading sub module "wfb"
[ 30.014] (II) LoadModule: "wfb"
[ 30.014] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 30.031] (II) Module wfb: vendor="X.Org Foundation"
[ 30.031] compiled for 1.12.4, module version = 1.0.0
[ 30.031] ABI class: X.Org ANSI C Emulation, version 0.4
[ 30.031] (II) Loading sub module "ramdac"
[ 30.031] (II) LoadModule: "ramdac"
[ 30.031] (II) Module "ramdac" already built-in
[ 30.102] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 30.102] (==) NVIDIA(0): RGB weight 888
[ 30.102] (==) NVIDIA(0): Default visual is TrueColor
[ 30.102] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 30.103] (**) NVIDIA(0): Enabling 2D acceleration
[ 31.594] (II) NVIDIA(GPU-0): Display (BenQ G925HDA (CRT-0)) does not support NVIDIA 3D
[ 31.594] (II) NVIDIA(GPU-0): Vision stereo.
[ 31.621] (II) NVIDIA(0): NVIDIA GPU GeForce 6600 GT (NV43) at PCI:1:0:0 (GPU-0)
[ 31.621] (--) NVIDIA(0): Memory: 131072 kBytes
[ 31.621] (--) NVIDIA(0): VideoBIOS: 05.43.02.36.00
[ 31.621] (II) NVIDIA(0): Detected AGP rate: 8X
[ 31.621] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 31.621] (--) NVIDIA(0): Valid display device(s) on GeForce 6600 GT at PCI:1:0:0
[ 31.622] (--) NVIDIA(0): BenQ G925HDA (CRT-0) (connected)
[ 31.622] (--) NVIDIA(0): CRT-1
[ 31.622] (--) NVIDIA(0): TV-0
[ 31.622] (--) NVIDIA(0): DFP-0
[ 31.622] (--) NVIDIA(0): DFP-1
[ 31.622] (--) NVIDIA(0): BenQ G925HDA (CRT-0): 400.0 MHz maximum pixel clock
[ 31.622] (--) NVIDIA(0): CRT-1: 400.0 MHz maximum pixel clock
[ 31.622] (--) NVIDIA(0): TV-0: 400.0 MHz maximum pixel clock
[ 31.622] (--) NVIDIA(0): TV encoder: (null)
[ 31.622] (--) NVIDIA(0): DFP-0: 155.0 MHz maximum pixel clock
[ 31.622] (--) NVIDIA(0): DFP-0: Internal Single Link TMDS
[ 31.622] (--) NVIDIA(0): DFP-1: 155.0 MHz maximum pixel clock
[ 31.622] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
[ 31.622] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 31.622] (**) NVIDIA(0): device BenQ G925HDA (CRT-0) (Using EDID frequencies has
[ 31.622] (**) NVIDIA(0): been enabled on all display devices.)
[ 31.622] (==) NVIDIA(0):
[ 31.622] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 31.622] (==) NVIDIA(0): will be used as the requested mode.
[ 31.622] (==) NVIDIA(0):
[ 31.623] (II) NVIDIA(0): Validated MetaModes:
[ 31.623] (II) NVIDIA(0): "CRT-0:nvidia-auto-select"
[ 31.623] (II) NVIDIA(0): Virtual screen size determined to be 1368 x 768
[ 31.624] (WW) NVIDIA(0): Unable to support custom viewPortOut 1365 x 768 +1 +0
[ 31.625] (--) NVIDIA(0): DPI set to (84, 84); computed from "UseEdidDpi" X config
[ 31.625] (--) NVIDIA(0): option
[ 31.625] (--) Depth 24 pixmap format is 32 bpp
[ 31.634] (II) NVIDIA(0): Setting mode "CRT-0:nvidia-auto-select"
[ 31.736] (II) Loading extension NV-GLX
[ 31.802] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 31.802] (==) NVIDIA(0): Backing store disabled
[ 31.802] (==) NVIDIA(0): Silken mouse enabled
[ 31.802] (**) NVIDIA(0): DPMS enabled
[ 31.802] (II) Loading extension NV-CONTROL
[ 31.803] (II) Loading extension XINERAMA
[ 31.803] (II) Loading sub module "dri2"
[ 31.803] (II) LoadModule: "dri2"
[ 31.803] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 31.803] (II) Module dri2: vendor="X.Org Foundation"
[ 31.803] compiled for 1.12.4, module version = 1.2.0
[ 31.803] ABI class: X.Org Server Extension, version 6.0
[ 31.803] (II) NVIDIA(0): [DRI2] Setup complete
[ 31.804] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 31.804] (--) RandR disabled
[ 31.804] (II) Initializing built-in extension Generic Event Extension
[ 31.804] (II) Initializing built-in extension SHAPE
[ 31.804] (II) Initializing built-in extension MIT-SHM
[ 31.804] (II) Initializing built-in extension XInputExtension
[ 31.804] (II) Initializing built-in extension XTEST
[ 31.804] (II) Initializing built-in extension BIG-REQUESTS
[ 31.804] (II) Initializing built-in extension SYNC
[ 31.804] (II) Initializing built-in extension XKEYBOARD
[ 31.804] (II) Initializing built-in extension XC-MISC
[ 31.804] (II) Initializing built-in extension SECURITY
[ 31.804] (II) Initializing built-in extension XINERAMA
[ 31.804] (II) Initializing built-in extension XFIXES
[ 31.804] (II) Initializing built-in extension RENDER
[ 31.804] (II) Initializing built-in extension RANDR
[ 31.804] (II) Initializing built-in extension COMPOSITE
[ 31.804] (II) Initializing built-in extension DAMAGE
[ 31.804] (II) SELinux: Disabled on system
[ 31.809] (II) Initializing extension GLX
[ 32.166] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 32.166] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 32.166] (II) LoadModule: "evdev"
[ 32.167] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 32.180] (II) Module evdev: vendor="X.Org Foundation"
[ 32.180] compiled for 1.12.1, module version = 2.7.0
[ 32.180] Module class: X.Org XInput Driver
[ 32.180] ABI class: X.Org XInput driver, version 16.0
[ 32.180] (II) Using input driver 'evdev' for 'Power Button'
[ 32.180] (**) Power Button: always reports core events
[ 32.180] (**) evdev: Power Button: Device: "/dev/input/event5"
[ 32.180] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 32.180] (--) evdev: Power Button: Found keys
[ 32.180] (II) evdev: Power Button: Configuring as keyboard
[ 32.180] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5"
[ 32.180] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 32.180] (**) Option "xkb_rules" "evdev"
[ 32.181] (**) Option "xkb_model" "pc105"
[ 32.181] (**) Option "xkb_layout" "pl"
[ 32.229] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 32.229] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 32.229] (II) Using input driver 'evdev' for 'Power Button'
[ 32.229] (**) Power Button: always reports core events
[ 32.229] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 32.229] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 32.229] (--) evdev: Power Button: Found keys
[ 32.229] (II) evdev: Power Button: Configuring as keyboard
[ 32.229] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3/event3"
[ 32.229] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 32.229] (**) Option "xkb_rules" "evdev"
[ 32.229] (**) Option "xkb_model" "pc105"
[ 32.230] (**) Option "xkb_layout" "pl"
[ 32.230] (II) config/udev: Adding input device Sleep Button (/dev/input/event4)
[ 32.230] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 32.231] (II) Using input driver 'evdev' for 'Sleep Button'
[ 32.231] (**) Sleep Button: always reports core events
[ 32.231] (**) evdev: Sleep Button: Device: "/dev/input/event4"
[ 32.231] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 32.231] (--) evdev: Sleep Button: Found keys
[ 32.231] (II) evdev: Sleep Button: Configuring as keyboard
[ 32.231] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4/event4"
[ 32.231] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 32.231] (**) Option "xkb_rules" "evdev"
[ 32.231] (**) Option "xkb_model" "pc105"
[ 32.231] (**) Option "xkb_layout" "pl"
[ 32.232] (II) config/udev: Adding input device USB USB Keykoard (/dev/input/event0)
[ 32.232] (**) USB USB Keykoard: Applying InputClass "evdev keyboard catchall"
[ 32.232] (II) Using input driver 'evdev' for 'USB USB Keykoard'
[ 32.232] (**) USB USB Keykoard: always reports core events
[ 32.232] (**) evdev: USB USB Keykoard: Device: "/dev/input/event0"
[ 32.232] (--) evdev: USB USB Keykoard: Vendor 0x1a2c Product 0x23
[ 32.232] (--) evdev: USB USB Keykoard: Found keys
[ 32.232] (II) evdev: USB USB Keykoard: Configuring as keyboard
[ 32.232] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.0/usb2/2-1/2-1:1.0/input/input0/event0"
[ 32.232] (II) XINPUT: Adding extended input device "USB USB Keykoard" (type: KEYBOARD, id 9)
[ 32.232] (**) Option "xkb_rules" "evdev"
[ 32.232] (**) Option "xkb_model" "pc105"
[ 32.232] (**) Option "xkb_layout" "pl"
[ 32.233] (II) config/udev: Adding input device USB USB Keykoard (/dev/input/event1)
[ 32.233] (**) USB USB Keykoard: Applying InputClass "evdev keyboard catchall"
[ 32.233] (II) Using input driver 'evdev' for 'USB USB Keykoard'
[ 32.234] (**) USB USB Keykoard: always reports core events
[ 32.234] (**) evdev: USB USB Keykoard: Device: "/dev/input/event1"
[ 32.234] (--) evdev: USB USB Keykoard: Vendor 0x1a2c Product 0x23
[ 32.234] (--) evdev: USB USB Keykoard: Found 1 mouse buttons
[ 32.234] (--) evdev: USB USB Keykoard: Found scroll wheel(s)
[ 32.234] (--) evdev: USB USB Keykoard: Found relative axes
[ 32.234] (II) evdev: USB USB Keykoard: Forcing relative x/y axes to exist.
[ 32.234] (--) evdev: USB USB Keykoard: Found absolute axes
[ 32.234] (II) evdev: USB USB Keykoard: Forcing absolute x/y axes to exist.
[ 32.234] (--) evdev: USB USB Keykoard: Found keys
[ 32.234] (II) evdev: USB USB Keykoard: Configuring as mouse
[ 32.234] (II) evdev: USB USB Keykoard: Configuring as keyboard
[ 32.234] (II) evdev: USB USB Keykoard: Adding scrollwheel support
[ 32.234] (**) evdev: USB USB Keykoard: YAxisMapping: buttons 4 and 5
[ 32.234] (**) evdev: USB USB Keykoard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 32.234] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.0/usb2/2-1/2-1:1.1/input/input1/event1"
[ 32.234] (II) XINPUT: Adding extended input device "USB USB Keykoard" (type: KEYBOARD, id 10)
[ 32.234] (**) Option "xkb_rules" "evdev"
[ 32.234] (**) Option "xkb_model" "pc105"
[ 32.234] (**) Option "xkb_layout" "pl"
[ 32.234] (II) evdev: USB USB Keykoard: initialized for relative axes.
[ 32.235] (WW) evdev: USB USB Keykoard: ignoring absolute axes.
[ 32.235] (**) USB USB Keykoard: (accel) keeping acceleration scheme 1
[ 32.235] (**) USB USB Keykoard: (accel) acceleration profile 0
[ 32.235] (**) USB USB Keykoard: (accel) acceleration factor: 2.000
[ 32.235] (**) USB USB Keykoard: (accel) acceleration threshold: 4
[ 32.236] (II) config/udev: Adding input device USB Mouse (/dev/input/event2)
[ 32.236] (**) USB Mouse : Applying InputClass "evdev pointer catchall"
[ 32.236] (II) Using input driver 'evdev' for 'USB Mouse '
[ 32.236] (**) USB Mouse : always reports core events
[ 32.236] (**) evdev: USB Mouse : Device: "/dev/input/event2"
[ 32.236] (--) evdev: USB Mouse : Vendor 0x5e3 Product 0x1205
[ 32.236] (--) evdev: USB Mouse : Found 9 mouse buttons
[ 32.236] (--) evdev: USB Mouse : Found scroll wheel(s)
[ 32.236] (--) evdev: USB Mouse : Found relative axes
[ 32.236] (--) evdev: USB Mouse : Found x and y relative axes
[ 32.236] (II) evdev: USB Mouse : Configuring as mouse
[ 32.236] (II) evdev: USB Mouse : Adding scrollwheel support
[ 32.236] (**) evdev: USB Mouse : YAxisMapping: buttons 4 and 5
[ 32.236] (**) evdev: USB Mouse : EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 32.236] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2:1.0/input/input2/event2"
[ 32.236] (II) XINPUT: Adding extended input device "USB Mouse " (type: MOUSE, id 11)
[ 32.236] (II) evdev: USB Mouse : initialized for relative axes.
[ 32.237] (**) USB Mouse : (accel) keeping acceleration scheme 1
[ 32.237] (**) USB Mouse : (accel) acceleration profile 0
[ 32.237] (**) USB Mouse : (accel) acceleration factor: 2.000
[ 32.237] (**) USB Mouse : (accel) acceleration threshold: 4
[ 32.237] (II) config/udev: Adding input device USB Mouse (/dev/input/mouse0)
[ 32.237] (II) No input driver specified, ignoring this device.
[ 32.237] (II) This device may have been added with another device file.
[ 32.238] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 32.238] (II) No input driver specified, ignoring this device.
[ 32.238] (II) This device may have been added with another device file.
[ 32.432] (II) NVIDIA(GPU-0): Display (BenQ G925HDA (CRT-0)) does not support NVIDIA 3D
[ 32.433] (II) NVIDIA(GPU-0): Vision stereo.
[ 32.433] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 32.433] (**) NVIDIA(0): device BenQ G925HDA (CRT-0) (Using EDID frequencies has
[ 32.433] (**) NVIDIA(0): been enabled on all display devices.)
[ 35.361] (II) NVIDIA(GPU-0): Display (BenQ G925HDA (CRT-0)) does not support NVIDIA 3D
[ 35.361] (II) NVIDIA(GPU-0): Vision stereo.
[ 35.361] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 35.361] (**) NVIDIA(0): device BenQ G925HDA (CRT-0) (Using EDID frequencies has
[ 35.361] (**) NVIDIA(0): been enabled on all display devices.)
[ 47.698] (II) NVIDIA(GPU-0): Display (BenQ G925HDA (CRT-0)) does not support NVIDIA 3D
[ 47.698] (II) NVIDIA(GPU-0): Vision stereo.
[ 47.698] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 47.698] (**) NVIDIA(0): device BenQ G925HDA (CRT-0) (Using EDID frequencies has
[ 47.698] (**) NVIDIA(0): been enabled on all display devices.)
[ 50.146] (II) NVIDIA(GPU-0): Display (BenQ G925HDA (CRT-0)) does not support NVIDIA 3D
[ 50.146] (II) NVIDIA(GPU-0): Vision stereo.
[ 50.146] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 50.146] (**) NVIDIA(0): device BenQ G925HDA (CRT-0) (Using EDID frequencies has
[ 50.146] (**) NVIDIA(0): been enabled on all display devices.)
[ 52.307] (II) NVIDIA(GPU-0): Display (BenQ G925HDA (CRT-0)) does not support NVIDIA 3D
[ 52.307] (II) NVIDIA(GPU-0): Vision stereo.
[ 52.307] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 52.307] (**) NVIDIA(0): device BenQ G925HDA (CRT-0) (Using EDID frequencies has
[ 52.307] (**) NVIDIA(0): been enabled on all display devices.)Zapomniałbym, oto dzieło tychże sterowników - xorg.conf:
Kod:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 304.48 (buildd@murphy) Wed Sep 12 11:32:28 UTC 2012
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSectionjak widać, chyba niczym się nie różni, oprócz zapisu wersji tych sterowników.
@edit: Co najdziwniejsze, pewien wpis spowodował u mnie przemożną chęć uderzenia 98 razy głową w biurko i powiedzeniem 284 razy niecenzuralnego słowa "k***a", dokładniej - ten:
Kod:
[ 31.624] (WW) NVIDIA(0): Unable to support custom viewPortOut 1365 x 768 +1 +0
Pytanie - czemu te sterowniki nie chcą działać normalnie, tylko robią takie farmazony?
Ostatnio edytowany przez Shiny (2013-01-06 20:37:21)
Offline
#35 2013-01-06 20:37:33
ArnVaker - Kapelusznik
- ArnVaker
- Kapelusznik
- Skąd: Midgard
- Zarejestrowany: 2009-05-06
Re: Problem z ustawieniem natywnej rozdzielczości monitora Benq G925 HDA
Shiny napisał(-a):
Pytanie - czemu te sterowniki nie chcą działać normalnie, tylko robią takie farmazony?
To już pytanie do Nvidii, wszak to zamknięte oprogramowanie. No nie wiem co Ci poradzić, można przerabiać znowu to samo, tzn.:
- xorg.conf ze zdefiniowaną rozdzielczością: http://dug.net.pl/tekst/142/nvidia___zamkniete_ster … ie/#xorg_conf
- dodanie modeline: http://dug.net.pl/tekst/125/nvidia___konfiguracja_r … zania_obrazu/
- xorg.conf z wyłączeniem EDID: http://forum.dug.net.pl/viewtopic.php?pid=213532#p213532
Ale pewnie znowu to nic nie da skoro jest to samo, a nowszych sterowników oficjalnie obsługujących tę kartę już nie ma.
Ostatecznie można na forum Nvidii spytać, autorzy tych sterowników się tam udzielają.
EDIT: Jeszcze widziałem kiedyś sposób z utworzeniem własnego niby EDID, ale to trzeba by poszukać w sieci i też nie wiadomo czy coś da.
Offline
#36 2013-01-07 11:08:55
Shiny - Użytkownik
- Shiny
- Użytkownik
- Skąd: Poland
- Zarejestrowany: 2013-01-05
Re: Problem z ustawieniem natywnej rozdzielczości monitora Benq G925 HDA
Co do definiowania rozdzielczości, dodania modeline i wyłączenie EDID - nic nie dało, na forum nVidii zadałem pytanie - brak odzewu, a jak już się odzew znalazł, to podali mi i tak niedziałającą rzecz...
W takim razie pozostaje tylko stworzenie własnego EDID, ale gdy go wyeksportowałem, to widzę tylko system szesnastkowy:
Kod:
00 ff ff ff ff ff ff 00 09 d1 43 78 45 54 00 00 0a 15 01 03 0e 29 17 78 2e 3d 85 a6 56 4a 9a 24 12 50 54 a5 6a 80 71 00 01 01 01 01 01 01 01 01 01 01 01 01 01 01 66 21 56 aa 51 00 1e 30 46 8f 33 00 9a e6 10 00 00 1e 00 00 00 ff 00 39 33 42 30 36 38 39 32 30 31 39 0a 20 00 00 00 fd 00 32 4c 1e 3f 0e 00 0a 20 20 20 20 20 20 00 00 00 fc 00 42 65 6e 51 20 47 39 32 35 48 44 41 0a 00 f1
który nawet po konwersji tym konwerterem na słowa:
Kod:
�ÿÿÿÿÿÿ� ÑCxET��
)x.=�¦VJ�$PTj�q�f!VªQ� 0F�3��æ�� ���ÿ�93B06892019
���ý�2L ?�
���ü�BenQ G925HDA
�ñpozostawia niewiele do życzenia i zrozumienia.
Ostatnio edytowany przez Shiny (2013-01-07 11:10:50)
Offline
#37 2013-01-07 12:18:31
ArnVaker - Kapelusznik
- ArnVaker
- Kapelusznik
- Skąd: Midgard
- Zarejestrowany: 2009-05-06
Re: Problem z ustawieniem natywnej rozdzielczości monitora Benq G925 HDA
Właściwie miałem na myśli to forum: https://devtalk.nvidia.com/default/board/98/linux/ :)
PS Masz może loga z użycia xorg.conf z wyłączeniem EDID?
Offline
#38 2013-01-07 13:23:04
Shiny - Użytkownik
- Shiny
- Użytkownik
- Skąd: Poland
- Zarejestrowany: 2013-01-05
Re: Problem z ustawieniem natywnej rozdzielczości monitora Benq G925 HDA
Mam i xorga i log (stworzone rzecz jasna teraz, wyłączyłem tylko i wyłącznie EDID i... mam rozdzielczość ekranu 640x480). Xorg.conf:
Kod:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 304.48 (buildd@murphy) Wed Sep 12 11:32:28 UTC 2012
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
ModeLine "1366x768" 85.5 1366 1436 1579 1792 768 771 774 798 +hsync +vsync
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
Option "UseEDID" "false"
EndSectionLog:
Kod:
[ 28.388]
X.Org X Server 1.12.4
Release Date: 2012-08-27
[ 28.389] X Protocol Version 11, Revision 0
[ 28.389] Build Operating System: Linux 2.6.32-5-amd64 i686 Debian
[ 28.389] Current Operating System: Linux user31-231 3.2.0-4-686-pae #1 SMP Debian 3.2.35-2 i686
[ 28.389] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-686-pae root=UUID=fa3a2ec7-1f4d-46a0-8866-9d5e295cd786 ro quiet
[ 28.389] Build Date: 29 November 2012 08:52:43PM
[ 28.389] xorg-server 2:1.12.4-4 (Julien Cristau <jcristau@debian.org>)
[ 28.389] Current version of pixman: 0.26.0
[ 28.389] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 28.389] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 28.389] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jan 7 13:20:02 2013
[ 28.409] (==) Using config file: "/etc/X11/xorg.conf"
[ 28.409] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 28.445] (==) ServerLayout "Layout0"
[ 28.445] (**) |-->Screen "Screen0" (0)
[ 28.445] (**) | |-->Monitor "Monitor0"
[ 28.456] (**) | |-->Device "Device0"
[ 28.456] (**) |-->Input Device "Keyboard0"
[ 28.456] (**) |-->Input Device "Mouse0"
[ 28.456] (==) Automatically adding devices
[ 28.456] (==) Automatically enabling devices
[ 28.498] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 28.498] Entry deleted from font path.
[ 28.528] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[ 28.528] Entry deleted from font path.
[ 28.528] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 28.528] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 28.528] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 28.528] (WW) Disabling Keyboard0
[ 28.528] (WW) Disabling Mouse0
[ 28.528] (II) Loader magic: 0xb773d5a0
[ 28.528] (II) Module ABI versions:
[ 28.528] X.Org ANSI C Emulation: 0.4
[ 28.528] X.Org Video Driver: 12.1
[ 28.528] X.Org XInput driver : 16.0
[ 28.528] X.Org Server Extension : 6.0
[ 28.529] (--) PCI:*(0:1:0:0) 10de:00f1:1682:2119 rev 162, Mem @ 0xfa000000/16777216, 0xe0000000/268435456, 0xfb000000/16777216, BIOS @ 0x????????/131072
[ 28.529] (II) Open ACPI successful (/var/run/acpid.socket)
[ 28.530] (II) LoadModule: "extmod"
[ 28.708] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 28.724] (II) Module extmod: vendor="X.Org Foundation"
[ 28.724] compiled for 1.12.4, module version = 1.0.0
[ 28.724] Module class: X.Org Server Extension
[ 28.724] ABI class: X.Org Server Extension, version 6.0
[ 28.724] (II) Loading extension SELinux
[ 28.724] (II) Loading extension MIT-SCREEN-SAVER
[ 28.724] (II) Loading extension XFree86-VidModeExtension
[ 28.724] (II) Loading extension XFree86-DGA
[ 28.724] (II) Loading extension DPMS
[ 28.724] (II) Loading extension XVideo
[ 28.724] (II) Loading extension XVideo-MotionCompensation
[ 28.724] (II) Loading extension X-Resource
[ 28.724] (II) LoadModule: "dbe"
[ 28.725] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 28.740] (II) Module dbe: vendor="X.Org Foundation"
[ 28.740] compiled for 1.12.4, module version = 1.0.0
[ 28.740] Module class: X.Org Server Extension
[ 28.740] ABI class: X.Org Server Extension, version 6.0
[ 28.740] (II) Loading extension DOUBLE-BUFFER
[ 28.741] (II) LoadModule: "glx"
[ 28.741] (II) Loading /usr/lib/xorg/modules/linux/libglx.so
[ 30.500] (II) Module glx: vendor="NVIDIA Corporation"
[ 30.500] compiled for 4.0.2, module version = 1.0.0
[ 30.500] Module class: X.Org Server Extension
[ 30.500] (II) NVIDIA GLX Module 304.64 Tue Oct 30 11:31:18 PDT 2012
[ 30.500] (II) Loading extension GLX
[ 30.500] (II) LoadModule: "record"
[ 30.501] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 30.599] (II) Module record: vendor="X.Org Foundation"
[ 30.599] compiled for 1.12.4, module version = 1.13.0
[ 30.599] Module class: X.Org Server Extension
[ 30.600] ABI class: X.Org Server Extension, version 6.0
[ 30.600] (II) Loading extension RECORD
[ 30.600] (II) LoadModule: "dri"
[ 30.600] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 30.692] (II) Module dri: vendor="X.Org Foundation"
[ 30.692] compiled for 1.12.4, module version = 1.0.0
[ 30.692] ABI class: X.Org Server Extension, version 6.0
[ 30.692] (II) Loading extension XFree86-DRI
[ 30.692] (II) LoadModule: "dri2"
[ 30.692] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 30.699] (II) Module dri2: vendor="X.Org Foundation"
[ 30.699] compiled for 1.12.4, module version = 1.2.0
[ 30.699] ABI class: X.Org Server Extension, version 6.0
[ 30.699] (II) Loading extension DRI2
[ 30.699] (II) LoadModule: "nvidia"
[ 30.699] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 30.858] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 30.859] compiled for 4.0.2, module version = 1.0.0
[ 30.859] Module class: X.Org Video Driver
[ 30.933] (II) NVIDIA dlloader X Driver 304.64 Tue Oct 30 11:11:05 PDT 2012
[ 30.933] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 30.959] (++) using VT number 7
[ 31.000] (II) Loading sub module "fb"
[ 31.000] (II) LoadModule: "fb"
[ 31.001] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 31.054] (II) Module fb: vendor="X.Org Foundation"
[ 31.054] compiled for 1.12.4, module version = 1.0.0
[ 31.054] ABI class: X.Org ANSI C Emulation, version 0.4
[ 31.054] (II) Loading sub module "wfb"
[ 31.054] (II) LoadModule: "wfb"
[ 31.055] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 31.069] (II) Module wfb: vendor="X.Org Foundation"
[ 31.069] compiled for 1.12.4, module version = 1.0.0
[ 31.069] ABI class: X.Org ANSI C Emulation, version 0.4
[ 31.069] (II) Loading sub module "ramdac"
[ 31.069] (II) LoadModule: "ramdac"
[ 31.069] (II) Module "ramdac" already built-in
[ 31.082] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 31.082] (==) NVIDIA(0): RGB weight 888
[ 31.082] (==) NVIDIA(0): Default visual is TrueColor
[ 31.082] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 31.082] (**) NVIDIA(0): Option "UseEDID" "false"
[ 31.082] (**) NVIDIA(0): Enabling 2D acceleration
[ 31.082] (**) NVIDIA(0): Ignoring EDIDs
[ 32.521] (II) NVIDIA(GPU-0): Not probing EDID on CRT-0.
[ 32.543] (II) NVIDIA(0): NVIDIA GPU GeForce 6600 GT (NV43) at PCI:1:0:0 (GPU-0)
[ 32.543] (--) NVIDIA(0): Memory: 131072 kBytes
[ 32.543] (--) NVIDIA(0): VideoBIOS: 05.43.02.36.00
[ 32.543] (II) NVIDIA(0): Detected AGP rate: 8X
[ 32.543] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 32.543] (--) NVIDIA(0): Valid display device(s) on GeForce 6600 GT at PCI:1:0:0
[ 32.543] (--) NVIDIA(0): CRT-0 (connected)
[ 32.543] (--) NVIDIA(0): CRT-1
[ 32.543] (--) NVIDIA(0): TV-0
[ 32.543] (--) NVIDIA(0): DFP-0
[ 32.543] (--) NVIDIA(0): DFP-1
[ 32.543] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[ 32.543] (--) NVIDIA(0): CRT-1: 400.0 MHz maximum pixel clock
[ 32.543] (--) NVIDIA(0): TV-0: 400.0 MHz maximum pixel clock
[ 32.543] (--) NVIDIA(0): TV encoder: (null)
[ 32.543] (--) NVIDIA(0): DFP-0: 155.0 MHz maximum pixel clock
[ 32.543] (--) NVIDIA(0): DFP-0: Internal Single Link TMDS
[ 32.543] (--) NVIDIA(0): DFP-1: 155.0 MHz maximum pixel clock
[ 32.543] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
[ 32.543] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 32.543] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
[ 32.543] (**) NVIDIA(0): all display devices.)
[ 32.544] (==) NVIDIA(0):
[ 32.544] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 32.544] (==) NVIDIA(0): will be used as the requested mode.
[ 32.544] (==) NVIDIA(0):
[ 32.544] (II) NVIDIA(0): Validated MetaModes:
[ 32.544] (II) NVIDIA(0): "CRT-0:nvidia-auto-select"
[ 32.544] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
[ 32.545] (WW) NVIDIA(0): Unable to support custom viewPortOut 640 x 360 +0 +60
[ 32.546] (WW) NVIDIA(0): Unable to get display device CRT-0's EDID; cannot compute DPI
[ 32.546] (WW) NVIDIA(0): from CRT-0's EDID.
[ 32.546] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[ 32.546] (--) Depth 24 pixmap format is 32 bpp
[ 32.555] (II) NVIDIA(0): Setting mode "CRT-0:nvidia-auto-select"
[ 32.630] (II) NVIDIA(0): Built-in logo is bigger than the screen.
[ 32.630] (II) Loading extension NV-GLX
[ 32.696] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 32.696] (==) NVIDIA(0): Backing store disabled
[ 32.696] (==) NVIDIA(0): Silken mouse enabled
[ 32.696] (**) NVIDIA(0): DPMS enabled
[ 32.696] (II) Loading extension NV-CONTROL
[ 32.697] (II) Loading extension XINERAMA
[ 32.697] (II) Loading sub module "dri2"
[ 32.697] (II) LoadModule: "dri2"
[ 32.698] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 32.698] (II) Module dri2: vendor="X.Org Foundation"
[ 32.698] compiled for 1.12.4, module version = 1.2.0
[ 32.698] ABI class: X.Org Server Extension, version 6.0
[ 32.698] (II) NVIDIA(0): [DRI2] Setup complete
[ 32.698] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 32.698] (--) RandR disabled
[ 32.698] (II) Initializing built-in extension Generic Event Extension
[ 32.698] (II) Initializing built-in extension SHAPE
[ 32.698] (II) Initializing built-in extension MIT-SHM
[ 32.698] (II) Initializing built-in extension XInputExtension
[ 32.698] (II) Initializing built-in extension XTEST
[ 32.698] (II) Initializing built-in extension BIG-REQUESTS
[ 32.698] (II) Initializing built-in extension SYNC
[ 32.698] (II) Initializing built-in extension XKEYBOARD
[ 32.698] (II) Initializing built-in extension XC-MISC
[ 32.698] (II) Initializing built-in extension SECURITY
[ 32.698] (II) Initializing built-in extension XINERAMA
[ 32.698] (II) Initializing built-in extension XFIXES
[ 32.698] (II) Initializing built-in extension RENDER
[ 32.698] (II) Initializing built-in extension RANDR
[ 32.698] (II) Initializing built-in extension COMPOSITE
[ 32.698] (II) Initializing built-in extension DAMAGE
[ 32.698] (II) SELinux: Disabled on system
[ 32.703] (II) Initializing extension GLX
[ 33.046] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 33.046] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 33.046] (II) LoadModule: "evdev"
[ 33.046] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 33.060] (II) Module evdev: vendor="X.Org Foundation"
[ 33.060] compiled for 1.12.1, module version = 2.7.0
[ 33.060] Module class: X.Org XInput Driver
[ 33.060] ABI class: X.Org XInput driver, version 16.0
[ 33.060] (II) Using input driver 'evdev' for 'Power Button'
[ 33.060] (**) Power Button: always reports core events
[ 33.060] (**) evdev: Power Button: Device: "/dev/input/event5"
[ 33.060] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 33.060] (--) evdev: Power Button: Found keys
[ 33.060] (II) evdev: Power Button: Configuring as keyboard
[ 33.060] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5"
[ 33.060] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 33.060] (**) Option "xkb_rules" "evdev"
[ 33.060] (**) Option "xkb_model" "pc105"
[ 33.060] (**) Option "xkb_layout" "pl"
[ 33.110] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 33.110] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 33.110] (II) Using input driver 'evdev' for 'Power Button'
[ 33.110] (**) Power Button: always reports core events
[ 33.110] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 33.110] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 33.110] (--) evdev: Power Button: Found keys
[ 33.110] (II) evdev: Power Button: Configuring as keyboard
[ 33.110] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3/event3"
[ 33.110] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 33.110] (**) Option "xkb_rules" "evdev"
[ 33.110] (**) Option "xkb_model" "pc105"
[ 33.110] (**) Option "xkb_layout" "pl"
[ 33.111] (II) config/udev: Adding input device Sleep Button (/dev/input/event4)
[ 33.111] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 33.111] (II) Using input driver 'evdev' for 'Sleep Button'
[ 33.111] (**) Sleep Button: always reports core events
[ 33.111] (**) evdev: Sleep Button: Device: "/dev/input/event4"
[ 33.111] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 33.111] (--) evdev: Sleep Button: Found keys
[ 33.111] (II) evdev: Sleep Button: Configuring as keyboard
[ 33.112] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4/event4"
[ 33.112] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 33.112] (**) Option "xkb_rules" "evdev"
[ 33.112] (**) Option "xkb_model" "pc105"
[ 33.112] (**) Option "xkb_layout" "pl"
[ 33.113] (II) config/udev: Adding input device USB USB Keykoard (/dev/input/event0)
[ 33.113] (**) USB USB Keykoard: Applying InputClass "evdev keyboard catchall"
[ 33.113] (II) Using input driver 'evdev' for 'USB USB Keykoard'
[ 33.113] (**) USB USB Keykoard: always reports core events
[ 33.113] (**) evdev: USB USB Keykoard: Device: "/dev/input/event0"
[ 33.113] (--) evdev: USB USB Keykoard: Vendor 0x1a2c Product 0x23
[ 33.113] (--) evdev: USB USB Keykoard: Found keys
[ 33.113] (II) evdev: USB USB Keykoard: Configuring as keyboard
[ 33.113] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.0/usb2/2-1/2-1:1.0/input/input0/event0"
[ 33.113] (II) XINPUT: Adding extended input device "USB USB Keykoard" (type: KEYBOARD, id 9)
[ 33.113] (**) Option "xkb_rules" "evdev"
[ 33.113] (**) Option "xkb_model" "pc105"
[ 33.113] (**) Option "xkb_layout" "pl"
[ 33.114] (II) config/udev: Adding input device USB USB Keykoard (/dev/input/event1)
[ 33.114] (**) USB USB Keykoard: Applying InputClass "evdev keyboard catchall"
[ 33.114] (II) Using input driver 'evdev' for 'USB USB Keykoard'
[ 33.114] (**) USB USB Keykoard: always reports core events
[ 33.114] (**) evdev: USB USB Keykoard: Device: "/dev/input/event1"
[ 33.114] (--) evdev: USB USB Keykoard: Vendor 0x1a2c Product 0x23
[ 33.114] (--) evdev: USB USB Keykoard: Found 1 mouse buttons
[ 33.114] (--) evdev: USB USB Keykoard: Found scroll wheel(s)
[ 33.114] (--) evdev: USB USB Keykoard: Found relative axes
[ 33.114] (II) evdev: USB USB Keykoard: Forcing relative x/y axes to exist.
[ 33.114] (--) evdev: USB USB Keykoard: Found absolute axes
[ 33.115] (II) evdev: USB USB Keykoard: Forcing absolute x/y axes to exist.
[ 33.115] (--) evdev: USB USB Keykoard: Found keys
[ 33.115] (II) evdev: USB USB Keykoard: Configuring as mouse
[ 33.115] (II) evdev: USB USB Keykoard: Configuring as keyboard
[ 33.115] (II) evdev: USB USB Keykoard: Adding scrollwheel support
[ 33.115] (**) evdev: USB USB Keykoard: YAxisMapping: buttons 4 and 5
[ 33.115] (**) evdev: USB USB Keykoard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 33.115] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.0/usb2/2-1/2-1:1.1/input/input1/event1"
[ 33.115] (II) XINPUT: Adding extended input device "USB USB Keykoard" (type: KEYBOARD, id 10)
[ 33.115] (**) Option "xkb_rules" "evdev"
[ 33.115] (**) Option "xkb_model" "pc105"
[ 33.115] (**) Option "xkb_layout" "pl"
[ 33.115] (II) evdev: USB USB Keykoard: initialized for relative axes.
[ 33.115] (WW) evdev: USB USB Keykoard: ignoring absolute axes.
[ 33.116] (**) USB USB Keykoard: (accel) keeping acceleration scheme 1
[ 33.116] (**) USB USB Keykoard: (accel) acceleration profile 0
[ 33.116] (**) USB USB Keykoard: (accel) acceleration factor: 2.000
[ 33.116] (**) USB USB Keykoard: (accel) acceleration threshold: 4
[ 33.116] (II) config/udev: Adding input device USB Mouse (/dev/input/event2)
[ 33.116] (**) USB Mouse : Applying InputClass "evdev pointer catchall"
[ 33.116] (II) Using input driver 'evdev' for 'USB Mouse '
[ 33.116] (**) USB Mouse : always reports core events
[ 33.116] (**) evdev: USB Mouse : Device: "/dev/input/event2"
[ 33.117] (--) evdev: USB Mouse : Vendor 0x5e3 Product 0x1205
[ 33.117] (--) evdev: USB Mouse : Found 9 mouse buttons
[ 33.117] (--) evdev: USB Mouse : Found scroll wheel(s)
[ 33.117] (--) evdev: USB Mouse : Found relative axes
[ 33.117] (--) evdev: USB Mouse : Found x and y relative axes
[ 33.117] (II) evdev: USB Mouse : Configuring as mouse
[ 33.117] (II) evdev: USB Mouse : Adding scrollwheel support
[ 33.117] (**) evdev: USB Mouse : YAxisMapping: buttons 4 and 5
[ 33.117] (**) evdev: USB Mouse : EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 33.117] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2:1.0/input/input2/event2"
[ 33.117] (II) XINPUT: Adding extended input device "USB Mouse " (type: MOUSE, id 11)
[ 33.117] (II) evdev: USB Mouse : initialized for relative axes.
[ 33.117] (**) USB Mouse : (accel) keeping acceleration scheme 1
[ 33.117] (**) USB Mouse : (accel) acceleration profile 0
[ 33.117] (**) USB Mouse : (accel) acceleration factor: 2.000
[ 33.117] (**) USB Mouse : (accel) acceleration threshold: 4
[ 33.118] (II) config/udev: Adding input device USB Mouse (/dev/input/mouse0)
[ 33.118] (II) No input driver specified, ignoring this device.
[ 33.118] (II) This device may have been added with another device file.
[ 33.118] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 33.118] (II) No input driver specified, ignoring this device.
[ 33.118] (II) This device may have been added with another device file.
[ 33.268] (II) NVIDIA(GPU-0): Not probing EDID on CRT-0.
[ 33.268] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 33.268] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
[ 33.268] (**) NVIDIA(0): all display devices.)
[ 36.262] (II) NVIDIA(GPU-0): Not probing EDID on CRT-0.
[ 36.262] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 36.262] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
[ 36.262] (**) NVIDIA(0): all display devices.)
[ 50.309] (II) NVIDIA(GPU-0): Not probing EDID on CRT-0.
[ 50.309] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 50.309] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
[ 50.309] (**) NVIDIA(0): all display devices.)
[ 52.528] (II) NVIDIA(GPU-0): Not probing EDID on CRT-0.
[ 52.528] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 52.528] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
[ 52.528] (**) NVIDIA(0): all display devices.)
[ 55.342] (II) NVIDIA(GPU-0): Not probing EDID on CRT-0.
[ 55.342] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 55.342] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
[ 55.342] (**) NVIDIA(0): all display devices.)Offline
#39 2013-01-07 13:30:18
ArnVaker - Kapelusznik
- ArnVaker
- Kapelusznik
- Skąd: Midgard
- Zarejestrowany: 2009-05-06
Re: Problem z ustawieniem natywnej rozdzielczości monitora Benq G925 HDA
Chodziło o to żebyś użył tego xorg.conf wstawiając tylko odpowiednie parametry:
Kod:
Section "Monitor"
Identifier "Configured Monitor"
HorizSync 30.0 - 81.0
VertRefresh 56.0 - 75.0
EndSection
Section "Device"
Identifier "Configured Video Device"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Option "UseEDID" "false"
Option "metamodes" "1440x900_60"
EndSectionTo jest cała zawartość pliku, nie mieszaj tego z innymi xorg.conf.
Offline
#40 2013-01-07 13:38:18
Shiny - Użytkownik
- Shiny
- Użytkownik
- Skąd: Poland
- Zarejestrowany: 2013-01-05
Re: Problem z ustawieniem natywnej rozdzielczości monitora Benq G925 HDA
Hm... w takim razie nie powinno nikogo zdziwić jeśli napiszę, że rozdzielczość ekranu w tym xorgu, który został przez Ciebie podany, nie zmieniła się ani trochę i wciąż wynosi 640x480. Wygląd xorga:
Kod:
Section "Monitor"
Identifier "Configured Monitor"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
EndSection
Section "Device"
Identifier "Configured Video Device"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Option "UseEDID" "false"
Option "metamodes" "1366x768_60"
EndSectionoraz logów:
Kod:
[ 27.939]
X.Org X Server 1.12.4
Release Date: 2012-08-27
[ 27.939] X Protocol Version 11, Revision 0
[ 27.939] Build Operating System: Linux 2.6.32-5-amd64 i686 Debian
[ 27.939] Current Operating System: Linux user31-231 3.2.0-4-686-pae #1 SMP Debian 3.2.35-2 i686
[ 27.939] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-686-pae root=UUID=fa3a2ec7-1f4d-46a0-8866-9d5e295cd786 ro quiet
[ 27.939] Build Date: 29 November 2012 08:52:43PM
[ 27.939] xorg-server 2:1.12.4-4 (Julien Cristau <jcristau@debian.org>)
[ 27.939] Current version of pixman: 0.26.0
[ 27.939] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 27.939] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 27.939] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jan 7 13:34:33 2013
[ 27.976] (==) Using config file: "/etc/X11/xorg.conf"
[ 27.976] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 28.011] (==) No Layout section. Using the first Screen section.
[ 28.011] (**) |-->Screen "Default Screen" (0)
[ 28.011] (**) | |-->Monitor "Configured Monitor"
[ 28.023] (==) No device specified for screen "Default Screen".
Using the first device section listed.
[ 28.023] (**) | |-->Device "Configured Video Device"
[ 28.023] (==) Automatically adding devices
[ 28.023] (==) Automatically enabling devices
[ 28.057] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 28.057] Entry deleted from font path.
[ 28.137] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[ 28.137] Entry deleted from font path.
[ 28.137] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 28.137] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 28.137] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 28.137] (II) Loader magic: 0xb77da5a0
[ 28.137] (II) Module ABI versions:
[ 28.137] X.Org ANSI C Emulation: 0.4
[ 28.137] X.Org Video Driver: 12.1
[ 28.137] X.Org XInput driver : 16.0
[ 28.137] X.Org Server Extension : 6.0
[ 28.138] (--) PCI:*(0:1:0:0) 10de:00f1:1682:2119 rev 162, Mem @ 0xfa000000/16777216, 0xe0000000/268435456, 0xfb000000/16777216, BIOS @ 0x????????/131072
[ 28.138] (II) Open ACPI successful (/var/run/acpid.socket)
[ 28.138] (II) LoadModule: "extmod"
[ 28.259] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 28.274] (II) Module extmod: vendor="X.Org Foundation"
[ 28.274] compiled for 1.12.4, module version = 1.0.0
[ 28.274] Module class: X.Org Server Extension
[ 28.274] ABI class: X.Org Server Extension, version 6.0
[ 28.274] (II) Loading extension SELinux
[ 28.274] (II) Loading extension MIT-SCREEN-SAVER
[ 28.274] (II) Loading extension XFree86-VidModeExtension
[ 28.274] (II) Loading extension XFree86-DGA
[ 28.274] (II) Loading extension DPMS
[ 28.274] (II) Loading extension XVideo
[ 28.274] (II) Loading extension XVideo-MotionCompensation
[ 28.274] (II) Loading extension X-Resource
[ 28.274] (II) LoadModule: "dbe"
[ 28.275] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 28.291] (II) Module dbe: vendor="X.Org Foundation"
[ 28.291] compiled for 1.12.4, module version = 1.0.0
[ 28.291] Module class: X.Org Server Extension
[ 28.291] ABI class: X.Org Server Extension, version 6.0
[ 28.291] (II) Loading extension DOUBLE-BUFFER
[ 28.291] (II) LoadModule: "glx"
[ 28.291] (II) Loading /usr/lib/xorg/modules/linux/libglx.so
[ 30.042] (II) Module glx: vendor="NVIDIA Corporation"
[ 30.042] compiled for 4.0.2, module version = 1.0.0
[ 30.042] Module class: X.Org Server Extension
[ 30.042] (II) NVIDIA GLX Module 304.64 Tue Oct 30 11:31:18 PDT 2012
[ 30.042] (II) Loading extension GLX
[ 30.042] (II) LoadModule: "record"
[ 30.043] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 30.141] (II) Module record: vendor="X.Org Foundation"
[ 30.142] compiled for 1.12.4, module version = 1.13.0
[ 30.142] Module class: X.Org Server Extension
[ 30.142] ABI class: X.Org Server Extension, version 6.0
[ 30.142] (II) Loading extension RECORD
[ 30.142] (II) LoadModule: "dri"
[ 30.142] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 30.234] (II) Module dri: vendor="X.Org Foundation"
[ 30.234] compiled for 1.12.4, module version = 1.0.0
[ 30.234] ABI class: X.Org Server Extension, version 6.0
[ 30.234] (II) Loading extension XFree86-DRI
[ 30.234] (II) LoadModule: "dri2"
[ 30.234] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 30.241] (II) Module dri2: vendor="X.Org Foundation"
[ 30.241] compiled for 1.12.4, module version = 1.2.0
[ 30.241] ABI class: X.Org Server Extension, version 6.0
[ 30.241] (II) Loading extension DRI2
[ 30.241] (II) LoadModule: "nvidia"
[ 30.241] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 30.397] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 30.398] compiled for 4.0.2, module version = 1.0.0
[ 30.398] Module class: X.Org Video Driver
[ 30.485] (II) NVIDIA dlloader X Driver 304.64 Tue Oct 30 11:11:05 PDT 2012
[ 30.485] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 30.509] (++) using VT number 7
[ 30.551] (II) Loading sub module "fb"
[ 30.551] (II) LoadModule: "fb"
[ 30.551] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 30.570] (II) Module fb: vendor="X.Org Foundation"
[ 30.570] compiled for 1.12.4, module version = 1.0.0
[ 30.570] ABI class: X.Org ANSI C Emulation, version 0.4
[ 30.570] (II) Loading sub module "wfb"
[ 30.570] (II) LoadModule: "wfb"
[ 30.586] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 30.611] (II) Module wfb: vendor="X.Org Foundation"
[ 30.611] compiled for 1.12.4, module version = 1.0.0
[ 30.611] ABI class: X.Org ANSI C Emulation, version 0.4
[ 30.611] (II) Loading sub module "ramdac"
[ 30.611] (II) LoadModule: "ramdac"
[ 30.611] (II) Module "ramdac" already built-in
[ 30.632] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen" for depth/fbbpp 24/32
[ 30.632] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 30.632] (==) NVIDIA(0): RGB weight 888
[ 30.632] (==) NVIDIA(0): Default visual is TrueColor
[ 30.632] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 30.633] (**) NVIDIA(0): Option "UseEDID" "false"
[ 30.633] (**) NVIDIA(0): Option "MetaModes" "1366x768_60"
[ 30.633] (**) NVIDIA(0): Enabling 2D acceleration
[ 30.633] (**) NVIDIA(0): Ignoring EDIDs
[ 32.057] (II) NVIDIA(GPU-0): Not probing EDID on CRT-0.
[ 32.059] (II) NVIDIA(0): NVIDIA GPU GeForce 6600 GT (NV43) at PCI:1:0:0 (GPU-0)
[ 32.059] (--) NVIDIA(0): Memory: 131072 kBytes
[ 32.059] (--) NVIDIA(0): VideoBIOS: 05.43.02.36.00
[ 32.059] (II) NVIDIA(0): Detected AGP rate: 8X
[ 32.059] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 32.059] (--) NVIDIA(0): Valid display device(s) on GeForce 6600 GT at PCI:1:0:0
[ 32.059] (--) NVIDIA(0): CRT-0 (connected)
[ 32.059] (--) NVIDIA(0): CRT-1
[ 32.059] (--) NVIDIA(0): TV-0
[ 32.060] (--) NVIDIA(0): DFP-0
[ 32.060] (--) NVIDIA(0): DFP-1
[ 32.060] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[ 32.060] (--) NVIDIA(0): CRT-1: 400.0 MHz maximum pixel clock
[ 32.060] (--) NVIDIA(0): TV-0: 400.0 MHz maximum pixel clock
[ 32.060] (--) NVIDIA(0): TV encoder: (null)
[ 32.060] (--) NVIDIA(0): DFP-0: 155.0 MHz maximum pixel clock
[ 32.060] (--) NVIDIA(0): DFP-0: Internal Single Link TMDS
[ 32.060] (--) NVIDIA(0): DFP-1: 155.0 MHz maximum pixel clock
[ 32.060] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
[ 32.060] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 32.060] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
[ 32.060] (**) NVIDIA(0): all display devices.)
[ 32.061] (WW) NVIDIA(0): No valid modes for "1366x768_60"; removing.
[ 32.061] (WW) NVIDIA(0):
[ 32.061] (WW) NVIDIA(0): Unable to validate any modes; falling back to the default mode
[ 32.061] (WW) NVIDIA(0): "nvidia-auto-select".
[ 32.061] (WW) NVIDIA(0):
[ 32.061] (II) NVIDIA(0): Validated MetaModes:
[ 32.061] (II) NVIDIA(0): "CRT-0:nvidia-auto-select"
[ 32.061] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
[ 32.062] (WW) NVIDIA(0): Unable to support custom viewPortOut 640 x 360 +0 +60
[ 32.062] (WW) NVIDIA(0): Unable to get display device CRT-0's EDID; cannot compute DPI
[ 32.062] (WW) NVIDIA(0): from CRT-0's EDID.
[ 32.062] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[ 32.062] (--) Depth 24 pixmap format is 32 bpp
[ 32.071] (II) NVIDIA(0): Setting mode "CRT-0:nvidia-auto-select"
[ 32.141] (II) NVIDIA(0): Built-in logo is bigger than the screen.
[ 32.141] (II) Loading extension NV-GLX
[ 32.188] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 32.188] (==) NVIDIA(0): Backing store disabled
[ 32.188] (==) NVIDIA(0): Silken mouse enabled
[ 32.188] (==) NVIDIA(0): DPMS enabled
[ 32.189] (II) Loading extension NV-CONTROL
[ 32.189] (II) Loading extension XINERAMA
[ 32.189] (II) Loading sub module "dri2"
[ 32.189] (II) LoadModule: "dri2"
[ 32.190] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 32.190] (II) Module dri2: vendor="X.Org Foundation"
[ 32.190] compiled for 1.12.4, module version = 1.2.0
[ 32.190] ABI class: X.Org Server Extension, version 6.0
[ 32.190] (II) NVIDIA(0): [DRI2] Setup complete
[ 32.190] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 32.190] (--) RandR disabled
[ 32.190] (II) Initializing built-in extension Generic Event Extension
[ 32.190] (II) Initializing built-in extension SHAPE
[ 32.190] (II) Initializing built-in extension MIT-SHM
[ 32.190] (II) Initializing built-in extension XInputExtension
[ 32.190] (II) Initializing built-in extension XTEST
[ 32.190] (II) Initializing built-in extension BIG-REQUESTS
[ 32.190] (II) Initializing built-in extension SYNC
[ 32.190] (II) Initializing built-in extension XKEYBOARD
[ 32.190] (II) Initializing built-in extension XC-MISC
[ 32.190] (II) Initializing built-in extension SECURITY
[ 32.190] (II) Initializing built-in extension XINERAMA
[ 32.190] (II) Initializing built-in extension XFIXES
[ 32.190] (II) Initializing built-in extension RENDER
[ 32.190] (II) Initializing built-in extension RANDR
[ 32.190] (II) Initializing built-in extension COMPOSITE
[ 32.190] (II) Initializing built-in extension DAMAGE
[ 32.190] (II) SELinux: Disabled on system
[ 32.195] (II) Initializing extension GLX
[ 32.538] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 32.538] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 32.538] (II) LoadModule: "evdev"
[ 32.539] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 32.552] (II) Module evdev: vendor="X.Org Foundation"
[ 32.552] compiled for 1.12.1, module version = 2.7.0
[ 32.552] Module class: X.Org XInput Driver
[ 32.552] ABI class: X.Org XInput driver, version 16.0
[ 32.552] (II) Using input driver 'evdev' for 'Power Button'
[ 32.552] (**) Power Button: always reports core events
[ 32.552] (**) evdev: Power Button: Device: "/dev/input/event5"
[ 32.552] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 32.552] (--) evdev: Power Button: Found keys
[ 32.552] (II) evdev: Power Button: Configuring as keyboard
[ 32.552] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5"
[ 32.552] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 32.552] (**) Option "xkb_rules" "evdev"
[ 32.552] (**) Option "xkb_model" "pc105"
[ 32.552] (**) Option "xkb_layout" "pl"
[ 32.602] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 32.602] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 32.602] (II) Using input driver 'evdev' for 'Power Button'
[ 32.602] (**) Power Button: always reports core events
[ 32.602] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 32.602] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 32.602] (--) evdev: Power Button: Found keys
[ 32.602] (II) evdev: Power Button: Configuring as keyboard
[ 32.602] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3/event3"
[ 32.602] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 32.602] (**) Option "xkb_rules" "evdev"
[ 32.602] (**) Option "xkb_model" "pc105"
[ 32.602] (**) Option "xkb_layout" "pl"
[ 32.603] (II) config/udev: Adding input device Sleep Button (/dev/input/event4)
[ 32.603] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 32.603] (II) Using input driver 'evdev' for 'Sleep Button'
[ 32.603] (**) Sleep Button: always reports core events
[ 32.603] (**) evdev: Sleep Button: Device: "/dev/input/event4"
[ 32.603] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 32.603] (--) evdev: Sleep Button: Found keys
[ 32.603] (II) evdev: Sleep Button: Configuring as keyboard
[ 32.603] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4/event4"
[ 32.604] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 32.604] (**) Option "xkb_rules" "evdev"
[ 32.604] (**) Option "xkb_model" "pc105"
[ 32.604] (**) Option "xkb_layout" "pl"
[ 32.605] (II) config/udev: Adding input device USB USB Keykoard (/dev/input/event0)
[ 32.605] (**) USB USB Keykoard: Applying InputClass "evdev keyboard catchall"
[ 32.605] (II) Using input driver 'evdev' for 'USB USB Keykoard'
[ 32.605] (**) USB USB Keykoard: always reports core events
[ 32.605] (**) evdev: USB USB Keykoard: Device: "/dev/input/event0"
[ 32.605] (--) evdev: USB USB Keykoard: Vendor 0x1a2c Product 0x23
[ 32.605] (--) evdev: USB USB Keykoard: Found keys
[ 32.605] (II) evdev: USB USB Keykoard: Configuring as keyboard
[ 32.605] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.0/usb2/2-1/2-1:1.0/input/input0/event0"
[ 32.605] (II) XINPUT: Adding extended input device "USB USB Keykoard" (type: KEYBOARD, id 9)
[ 32.605] (**) Option "xkb_rules" "evdev"
[ 32.605] (**) Option "xkb_model" "pc105"
[ 32.605] (**) Option "xkb_layout" "pl"
[ 32.606] (II) config/udev: Adding input device USB USB Keykoard (/dev/input/event1)
[ 32.606] (**) USB USB Keykoard: Applying InputClass "evdev keyboard catchall"
[ 32.606] (II) Using input driver 'evdev' for 'USB USB Keykoard'
[ 32.606] (**) USB USB Keykoard: always reports core events
[ 32.606] (**) evdev: USB USB Keykoard: Device: "/dev/input/event1"
[ 32.606] (--) evdev: USB USB Keykoard: Vendor 0x1a2c Product 0x23
[ 32.606] (--) evdev: USB USB Keykoard: Found 1 mouse buttons
[ 32.606] (--) evdev: USB USB Keykoard: Found scroll wheel(s)
[ 32.606] (--) evdev: USB USB Keykoard: Found relative axes
[ 32.606] (II) evdev: USB USB Keykoard: Forcing relative x/y axes to exist.
[ 32.606] (--) evdev: USB USB Keykoard: Found absolute axes
[ 32.607] (II) evdev: USB USB Keykoard: Forcing absolute x/y axes to exist.
[ 32.607] (--) evdev: USB USB Keykoard: Found keys
[ 32.607] (II) evdev: USB USB Keykoard: Configuring as mouse
[ 32.607] (II) evdev: USB USB Keykoard: Configuring as keyboard
[ 32.607] (II) evdev: USB USB Keykoard: Adding scrollwheel support
[ 32.607] (**) evdev: USB USB Keykoard: YAxisMapping: buttons 4 and 5
[ 32.607] (**) evdev: USB USB Keykoard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 32.607] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.0/usb2/2-1/2-1:1.1/input/input1/event1"
[ 32.607] (II) XINPUT: Adding extended input device "USB USB Keykoard" (type: KEYBOARD, id 10)
[ 32.607] (**) Option "xkb_rules" "evdev"
[ 32.607] (**) Option "xkb_model" "pc105"
[ 32.607] (**) Option "xkb_layout" "pl"
[ 32.607] (II) evdev: USB USB Keykoard: initialized for relative axes.
[ 32.607] (WW) evdev: USB USB Keykoard: ignoring absolute axes.
[ 32.608] (**) USB USB Keykoard: (accel) keeping acceleration scheme 1
[ 32.608] (**) USB USB Keykoard: (accel) acceleration profile 0
[ 32.608] (**) USB USB Keykoard: (accel) acceleration factor: 2.000
[ 32.608] (**) USB USB Keykoard: (accel) acceleration threshold: 4
[ 32.608] (II) config/udev: Adding input device USB Mouse (/dev/input/event2)
[ 32.608] (**) USB Mouse : Applying InputClass "evdev pointer catchall"
[ 32.608] (II) Using input driver 'evdev' for 'USB Mouse '
[ 32.608] (**) USB Mouse : always reports core events
[ 32.609] (**) evdev: USB Mouse : Device: "/dev/input/event2"
[ 32.609] (--) evdev: USB Mouse : Vendor 0x5e3 Product 0x1205
[ 32.609] (--) evdev: USB Mouse : Found 9 mouse buttons
[ 32.609] (--) evdev: USB Mouse : Found scroll wheel(s)
[ 32.609] (--) evdev: USB Mouse : Found relative axes
[ 32.609] (--) evdev: USB Mouse : Found x and y relative axes
[ 32.609] (II) evdev: USB Mouse : Configuring as mouse
[ 32.609] (II) evdev: USB Mouse : Adding scrollwheel support
[ 32.609] (**) evdev: USB Mouse : YAxisMapping: buttons 4 and 5
[ 32.609] (**) evdev: USB Mouse : EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 32.609] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2:1.0/input/input2/event2"
[ 32.609] (II) XINPUT: Adding extended input device "USB Mouse " (type: MOUSE, id 11)
[ 32.609] (II) evdev: USB Mouse : initialized for relative axes.
[ 32.609] (**) USB Mouse : (accel) keeping acceleration scheme 1
[ 32.609] (**) USB Mouse : (accel) acceleration profile 0
[ 32.609] (**) USB Mouse : (accel) acceleration factor: 2.000
[ 32.609] (**) USB Mouse : (accel) acceleration threshold: 4
[ 32.610] (II) config/udev: Adding input device USB Mouse (/dev/input/mouse0)
[ 32.610] (II) No input driver specified, ignoring this device.
[ 32.610] (II) This device may have been added with another device file.
[ 32.610] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 32.610] (II) No input driver specified, ignoring this device.
[ 32.610] (II) This device may have been added with another device file.
[ 32.759] (II) NVIDIA(GPU-0): Not probing EDID on CRT-0.
[ 32.759] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 32.759] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
[ 32.759] (**) NVIDIA(0): all display devices.)
[ 35.796] (II) NVIDIA(GPU-0): Not probing EDID on CRT-0.
[ 35.796] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 35.796] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
[ 35.796] (**) NVIDIA(0): all display devices.)
[ 49.917] (II) NVIDIA(GPU-0): Not probing EDID on CRT-0.
[ 49.917] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 49.917] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
[ 49.917] (**) NVIDIA(0): all display devices.)
[ 52.553] (II) NVIDIA(GPU-0): Not probing EDID on CRT-0.
[ 52.553] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 52.553] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
[ 52.554] (**) NVIDIA(0): all display devices.)
[ 54.605] (II) NVIDIA(GPU-0): Not probing EDID on CRT-0.
[ 54.605] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 54.605] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
[ 54.605] (**) NVIDIA(0): all display devices.)Ostatnio edytowany przez Shiny (2013-01-07 13:41:55)
Offline
#41 2013-01-07 13:52:19
ArnVaker - Kapelusznik
- ArnVaker
- Kapelusznik
- Skąd: Midgard
- Zarejestrowany: 2009-05-06
Re: Problem z ustawieniem natywnej rozdzielczości monitora Benq G925 HDA
Te wartości co wpisałeś wydają mi się niemożliwe, prędzej:
Kod:
Section "Monitor"
Identifier "Configured Monitor"
HorizSync 30.0 - 63.0
VertRefresh 50.0 - 76.0
EndSection
Section "Device"
Identifier "Configured Video Device"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Option "UseEDID" "false"
Option "metamodes" "1366x768_60"
EndSectionOffline
#42 2013-01-07 14:04:05
Shiny - Użytkownik
- Shiny
- Użytkownik
- Skąd: Poland
- Zarejestrowany: 2013-01-05
Re: Problem z ustawieniem natywnej rozdzielczości monitora Benq G925 HDA
No cóż, przy Twoich wartościach niby mam już "w miarę" normalne rozdzielczości, poza natywną. Logi:
Kod:
[ 27.908]
X.Org X Server 1.12.4
Release Date: 2012-08-27
[ 27.908] X Protocol Version 11, Revision 0
[ 27.908] Build Operating System: Linux 2.6.32-5-amd64 i686 Debian
[ 27.908] Current Operating System: Linux user31-231 3.2.0-4-686-pae #1 SMP Debian 3.2.35-2 i686
[ 27.908] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-686-pae root=UUID=fa3a2ec7-1f4d-46a0-8866-9d5e295cd786 ro quiet
[ 27.908] Build Date: 29 November 2012 08:52:43PM
[ 27.908] xorg-server 2:1.12.4-4 (Julien Cristau <jcristau@debian.org>)
[ 27.908] Current version of pixman: 0.26.0
[ 27.908] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 27.908] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 27.909] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jan 7 14:01:25 2013
[ 27.928] (==) Using config file: "/etc/X11/xorg.conf"
[ 27.928] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 27.962] (==) No Layout section. Using the first Screen section.
[ 27.962] (**) |-->Screen "Default Screen" (0)
[ 27.962] (**) | |-->Monitor "Configured Monitor"
[ 27.974] (==) No device specified for screen "Default Screen".
Using the first device section listed.
[ 27.975] (**) | |-->Device "Configured Video Device"
[ 27.975] (==) Automatically adding devices
[ 27.975] (==) Automatically enabling devices
[ 28.025] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 28.025] Entry deleted from font path.
[ 28.047] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[ 28.047] Entry deleted from font path.
[ 28.047] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 28.047] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 28.047] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 28.047] (II) Loader magic: 0xb77c55a0
[ 28.047] (II) Module ABI versions:
[ 28.047] X.Org ANSI C Emulation: 0.4
[ 28.047] X.Org Video Driver: 12.1
[ 28.047] X.Org XInput driver : 16.0
[ 28.047] X.Org Server Extension : 6.0
[ 28.048] (--) PCI:*(0:1:0:0) 10de:00f1:1682:2119 rev 162, Mem @ 0xfa000000/16777216, 0xe0000000/268435456, 0xfb000000/16777216, BIOS @ 0x????????/131072
[ 28.048] (II) Open ACPI successful (/var/run/acpid.socket)
[ 28.049] (II) LoadModule: "extmod"
[ 28.202] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 28.218] (II) Module extmod: vendor="X.Org Foundation"
[ 28.218] compiled for 1.12.4, module version = 1.0.0
[ 28.218] Module class: X.Org Server Extension
[ 28.218] ABI class: X.Org Server Extension, version 6.0
[ 28.218] (II) Loading extension SELinux
[ 28.218] (II) Loading extension MIT-SCREEN-SAVER
[ 28.218] (II) Loading extension XFree86-VidModeExtension
[ 28.218] (II) Loading extension XFree86-DGA
[ 28.218] (II) Loading extension DPMS
[ 28.218] (II) Loading extension XVideo
[ 28.218] (II) Loading extension XVideo-MotionCompensation
[ 28.218] (II) Loading extension X-Resource
[ 28.218] (II) LoadModule: "dbe"
[ 28.219] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 28.234] (II) Module dbe: vendor="X.Org Foundation"
[ 28.234] compiled for 1.12.4, module version = 1.0.0
[ 28.234] Module class: X.Org Server Extension
[ 28.234] ABI class: X.Org Server Extension, version 6.0
[ 28.235] (II) Loading extension DOUBLE-BUFFER
[ 28.235] (II) LoadModule: "glx"
[ 28.235] (II) Loading /usr/lib/xorg/modules/linux/libglx.so
[ 29.644] (II) Module glx: vendor="NVIDIA Corporation"
[ 29.644] compiled for 4.0.2, module version = 1.0.0
[ 29.644] Module class: X.Org Server Extension
[ 29.644] (II) NVIDIA GLX Module 304.64 Tue Oct 30 11:31:18 PDT 2012
[ 29.644] (II) Loading extension GLX
[ 29.644] (II) LoadModule: "record"
[ 29.645] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 29.677] (II) Module record: vendor="X.Org Foundation"
[ 29.677] compiled for 1.12.4, module version = 1.13.0
[ 29.677] Module class: X.Org Server Extension
[ 29.677] ABI class: X.Org Server Extension, version 6.0
[ 29.677] (II) Loading extension RECORD
[ 29.677] (II) LoadModule: "dri"
[ 29.677] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 29.690] (II) Module dri: vendor="X.Org Foundation"
[ 29.690] compiled for 1.12.4, module version = 1.0.0
[ 29.690] ABI class: X.Org Server Extension, version 6.0
[ 29.690] (II) Loading extension XFree86-DRI
[ 29.690] (II) LoadModule: "dri2"
[ 29.691] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 29.691] (II) Module dri2: vendor="X.Org Foundation"
[ 29.691] compiled for 1.12.4, module version = 1.2.0
[ 29.691] ABI class: X.Org Server Extension, version 6.0
[ 29.691] (II) Loading extension DRI2
[ 29.691] (II) LoadModule: "nvidia"
[ 29.691] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 29.941] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 29.941] compiled for 4.0.2, module version = 1.0.0
[ 29.941] Module class: X.Org Video Driver
[ 30.038] (II) NVIDIA dlloader X Driver 304.64 Tue Oct 30 11:11:05 PDT 2012
[ 30.038] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 30.044] (++) using VT number 7
[ 30.128] (II) Loading sub module "fb"
[ 30.355] (II) LoadModule: "fb"
[ 30.356] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 30.380] (II) Module fb: vendor="X.Org Foundation"
[ 30.380] compiled for 1.12.4, module version = 1.0.0
[ 30.381] ABI class: X.Org ANSI C Emulation, version 0.4
[ 30.381] (II) Loading sub module "wfb"
[ 30.381] (II) LoadModule: "wfb"
[ 30.381] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 30.388] (II) Module wfb: vendor="X.Org Foundation"
[ 30.388] compiled for 1.12.4, module version = 1.0.0
[ 30.388] ABI class: X.Org ANSI C Emulation, version 0.4
[ 30.388] (II) Loading sub module "ramdac"
[ 30.388] (II) LoadModule: "ramdac"
[ 30.388] (II) Module "ramdac" already built-in
[ 30.417] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen" for depth/fbbpp 24/32
[ 30.417] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 30.418] (==) NVIDIA(0): RGB weight 888
[ 30.418] (==) NVIDIA(0): Default visual is TrueColor
[ 30.418] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 30.418] (**) NVIDIA(0): Option "UseEDID" "false"
[ 30.418] (**) NVIDIA(0): Option "MetaModes" "1366x768_60"
[ 30.418] (**) NVIDIA(0): Enabling 2D acceleration
[ 30.418] (**) NVIDIA(0): Ignoring EDIDs
[ 31.841] (II) NVIDIA(GPU-0): Not probing EDID on CRT-0.
[ 31.844] (II) NVIDIA(0): NVIDIA GPU GeForce 6600 GT (NV43) at PCI:1:0:0 (GPU-0)
[ 31.844] (--) NVIDIA(0): Memory: 131072 kBytes
[ 31.844] (--) NVIDIA(0): VideoBIOS: 05.43.02.36.00
[ 31.844] (II) NVIDIA(0): Detected AGP rate: 8X
[ 31.844] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 31.844] (--) NVIDIA(0): Valid display device(s) on GeForce 6600 GT at PCI:1:0:0
[ 31.844] (--) NVIDIA(0): CRT-0 (connected)
[ 31.844] (--) NVIDIA(0): CRT-1
[ 31.844] (--) NVIDIA(0): TV-0
[ 31.844] (--) NVIDIA(0): DFP-0
[ 31.844] (--) NVIDIA(0): DFP-1
[ 31.844] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[ 31.844] (--) NVIDIA(0): CRT-1: 400.0 MHz maximum pixel clock
[ 31.844] (--) NVIDIA(0): TV-0: 400.0 MHz maximum pixel clock
[ 31.844] (--) NVIDIA(0): TV encoder: (null)
[ 31.844] (--) NVIDIA(0): DFP-0: 155.0 MHz maximum pixel clock
[ 31.844] (--) NVIDIA(0): DFP-0: Internal Single Link TMDS
[ 31.844] (--) NVIDIA(0): DFP-1: 155.0 MHz maximum pixel clock
[ 31.845] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
[ 31.845] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 31.845] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
[ 31.845] (**) NVIDIA(0): all display devices.)
[ 31.846] (WW) NVIDIA(0): No valid modes for "1366x768_60"; removing.
[ 31.846] (WW) NVIDIA(0):
[ 31.846] (WW) NVIDIA(0): Unable to validate any modes; falling back to the default mode
[ 31.846] (WW) NVIDIA(0): "nvidia-auto-select".
[ 31.846] (WW) NVIDIA(0):
[ 31.846] (II) NVIDIA(0): Validated MetaModes:
[ 31.846] (II) NVIDIA(0): "CRT-0:nvidia-auto-select"
[ 31.846] (II) NVIDIA(0): Virtual screen size determined to be 1024 x 768
[ 31.851] (WW) NVIDIA(0): Unable to support custom viewPortOut 1024 x 576 +0 +96
[ 31.852] (WW) NVIDIA(0): Unable to get display device CRT-0's EDID; cannot compute DPI
[ 31.852] (WW) NVIDIA(0): from CRT-0's EDID.
[ 31.852] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[ 31.852] (--) Depth 24 pixmap format is 32 bpp
[ 31.861] (II) NVIDIA(0): Setting mode "CRT-0:nvidia-auto-select"
[ 31.968] (II) Loading extension NV-GLX
[ 32.034] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 32.034] (==) NVIDIA(0): Backing store disabled
[ 32.034] (==) NVIDIA(0): Silken mouse enabled
[ 32.034] (==) NVIDIA(0): DPMS enabled
[ 32.035] (II) Loading extension NV-CONTROL
[ 32.035] (II) Loading extension XINERAMA
[ 32.035] (II) Loading sub module "dri2"
[ 32.035] (II) LoadModule: "dri2"
[ 32.036] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 32.036] (II) Module dri2: vendor="X.Org Foundation"
[ 32.036] compiled for 1.12.4, module version = 1.2.0
[ 32.036] ABI class: X.Org Server Extension, version 6.0
[ 32.036] (II) NVIDIA(0): [DRI2] Setup complete
[ 32.036] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 32.036] (--) RandR disabled
[ 32.036] (II) Initializing built-in extension Generic Event Extension
[ 32.036] (II) Initializing built-in extension SHAPE
[ 32.036] (II) Initializing built-in extension MIT-SHM
[ 32.036] (II) Initializing built-in extension XInputExtension
[ 32.036] (II) Initializing built-in extension XTEST
[ 32.036] (II) Initializing built-in extension BIG-REQUESTS
[ 32.036] (II) Initializing built-in extension SYNC
[ 32.036] (II) Initializing built-in extension XKEYBOARD
[ 32.036] (II) Initializing built-in extension XC-MISC
[ 32.036] (II) Initializing built-in extension SECURITY
[ 32.036] (II) Initializing built-in extension XINERAMA
[ 32.036] (II) Initializing built-in extension XFIXES
[ 32.036] (II) Initializing built-in extension RENDER
[ 32.036] (II) Initializing built-in extension RANDR
[ 32.036] (II) Initializing built-in extension COMPOSITE
[ 32.036] (II) Initializing built-in extension DAMAGE
[ 32.036] (II) SELinux: Disabled on system
[ 32.041] (II) Initializing extension GLX
[ 32.390] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 32.390] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 32.390] (II) LoadModule: "evdev"
[ 32.390] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 32.404] (II) Module evdev: vendor="X.Org Foundation"
[ 32.404] compiled for 1.12.1, module version = 2.7.0
[ 32.404] Module class: X.Org XInput Driver
[ 32.404] ABI class: X.Org XInput driver, version 16.0
[ 32.404] (II) Using input driver 'evdev' for 'Power Button'
[ 32.404] (**) Power Button: always reports core events
[ 32.404] (**) evdev: Power Button: Device: "/dev/input/event5"
[ 32.404] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 32.404] (--) evdev: Power Button: Found keys
[ 32.404] (II) evdev: Power Button: Configuring as keyboard
[ 32.404] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5"
[ 32.404] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 32.404] (**) Option "xkb_rules" "evdev"
[ 32.404] (**) Option "xkb_model" "pc105"
[ 32.404] (**) Option "xkb_layout" "pl"
[ 32.454] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 32.454] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 32.454] (II) Using input driver 'evdev' for 'Power Button'
[ 32.454] (**) Power Button: always reports core events
[ 32.454] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 32.454] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 32.454] (--) evdev: Power Button: Found keys
[ 32.454] (II) evdev: Power Button: Configuring as keyboard
[ 32.454] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3/event3"
[ 32.454] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 32.454] (**) Option "xkb_rules" "evdev"
[ 32.454] (**) Option "xkb_model" "pc105"
[ 32.454] (**) Option "xkb_layout" "pl"
[ 32.455] (II) config/udev: Adding input device Sleep Button (/dev/input/event4)
[ 32.455] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 32.455] (II) Using input driver 'evdev' for 'Sleep Button'
[ 32.455] (**) Sleep Button: always reports core events
[ 32.455] (**) evdev: Sleep Button: Device: "/dev/input/event4"
[ 32.455] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 32.455] (--) evdev: Sleep Button: Found keys
[ 32.455] (II) evdev: Sleep Button: Configuring as keyboard
[ 32.455] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4/event4"
[ 32.455] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 32.456] (**) Option "xkb_rules" "evdev"
[ 32.456] (**) Option "xkb_model" "pc105"
[ 32.456] (**) Option "xkb_layout" "pl"
[ 32.457] (II) config/udev: Adding input device USB USB Keykoard (/dev/input/event0)
[ 32.457] (**) USB USB Keykoard: Applying InputClass "evdev keyboard catchall"
[ 32.457] (II) Using input driver 'evdev' for 'USB USB Keykoard'
[ 32.457] (**) USB USB Keykoard: always reports core events
[ 32.457] (**) evdev: USB USB Keykoard: Device: "/dev/input/event0"
[ 32.457] (--) evdev: USB USB Keykoard: Vendor 0x1a2c Product 0x23
[ 32.457] (--) evdev: USB USB Keykoard: Found keys
[ 32.457] (II) evdev: USB USB Keykoard: Configuring as keyboard
[ 32.457] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.0/usb2/2-1/2-1:1.0/input/input0/event0"
[ 32.457] (II) XINPUT: Adding extended input device "USB USB Keykoard" (type: KEYBOARD, id 9)
[ 32.457] (**) Option "xkb_rules" "evdev"
[ 32.457] (**) Option "xkb_model" "pc105"
[ 32.457] (**) Option "xkb_layout" "pl"
[ 32.458] (II) config/udev: Adding input device USB USB Keykoard (/dev/input/event1)
[ 32.458] (**) USB USB Keykoard: Applying InputClass "evdev keyboard catchall"
[ 32.458] (II) Using input driver 'evdev' for 'USB USB Keykoard'
[ 32.458] (**) USB USB Keykoard: always reports core events
[ 32.458] (**) evdev: USB USB Keykoard: Device: "/dev/input/event1"
[ 32.458] (--) evdev: USB USB Keykoard: Vendor 0x1a2c Product 0x23
[ 32.458] (--) evdev: USB USB Keykoard: Found 1 mouse buttons
[ 32.458] (--) evdev: USB USB Keykoard: Found scroll wheel(s)
[ 32.458] (--) evdev: USB USB Keykoard: Found relative axes
[ 32.458] (II) evdev: USB USB Keykoard: Forcing relative x/y axes to exist.
[ 32.458] (--) evdev: USB USB Keykoard: Found absolute axes
[ 32.458] (II) evdev: USB USB Keykoard: Forcing absolute x/y axes to exist.
[ 32.458] (--) evdev: USB USB Keykoard: Found keys
[ 32.459] (II) evdev: USB USB Keykoard: Configuring as mouse
[ 32.459] (II) evdev: USB USB Keykoard: Configuring as keyboard
[ 32.459] (II) evdev: USB USB Keykoard: Adding scrollwheel support
[ 32.459] (**) evdev: USB USB Keykoard: YAxisMapping: buttons 4 and 5
[ 32.459] (**) evdev: USB USB Keykoard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 32.459] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.0/usb2/2-1/2-1:1.1/input/input1/event1"
[ 32.459] (II) XINPUT: Adding extended input device "USB USB Keykoard" (type: KEYBOARD, id 10)
[ 32.459] (**) Option "xkb_rules" "evdev"
[ 32.459] (**) Option "xkb_model" "pc105"
[ 32.459] (**) Option "xkb_layout" "pl"
[ 32.459] (II) evdev: USB USB Keykoard: initialized for relative axes.
[ 32.459] (WW) evdev: USB USB Keykoard: ignoring absolute axes.
[ 32.460] (**) USB USB Keykoard: (accel) keeping acceleration scheme 1
[ 32.460] (**) USB USB Keykoard: (accel) acceleration profile 0
[ 32.460] (**) USB USB Keykoard: (accel) acceleration factor: 2.000
[ 32.460] (**) USB USB Keykoard: (accel) acceleration threshold: 4
[ 32.460] (II) config/udev: Adding input device USB Mouse (/dev/input/event2)
[ 32.460] (**) USB Mouse : Applying InputClass "evdev pointer catchall"
[ 32.460] (II) Using input driver 'evdev' for 'USB Mouse '
[ 32.461] (**) USB Mouse : always reports core events
[ 32.461] (**) evdev: USB Mouse : Device: "/dev/input/event2"
[ 32.461] (--) evdev: USB Mouse : Vendor 0x5e3 Product 0x1205
[ 32.461] (--) evdev: USB Mouse : Found 9 mouse buttons
[ 32.461] (--) evdev: USB Mouse : Found scroll wheel(s)
[ 32.461] (--) evdev: USB Mouse : Found relative axes
[ 32.461] (--) evdev: USB Mouse : Found x and y relative axes
[ 32.461] (II) evdev: USB Mouse : Configuring as mouse
[ 32.461] (II) evdev: USB Mouse : Adding scrollwheel support
[ 32.461] (**) evdev: USB Mouse : YAxisMapping: buttons 4 and 5
[ 32.461] (**) evdev: USB Mouse : EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 32.461] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2:1.0/input/input2/event2"
[ 32.461] (II) XINPUT: Adding extended input device "USB Mouse " (type: MOUSE, id 11)
[ 32.461] (II) evdev: USB Mouse : initialized for relative axes.
[ 32.461] (**) USB Mouse : (accel) keeping acceleration scheme 1
[ 32.461] (**) USB Mouse : (accel) acceleration profile 0
[ 32.461] (**) USB Mouse : (accel) acceleration factor: 2.000
[ 32.461] (**) USB Mouse : (accel) acceleration threshold: 4
[ 32.462] (II) config/udev: Adding input device USB Mouse (/dev/input/mouse0)
[ 32.462] (II) No input driver specified, ignoring this device.
[ 32.462] (II) This device may have been added with another device file.
[ 32.462] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 32.462] (II) No input driver specified, ignoring this device.
[ 32.462] (II) This device may have been added with another device file.
[ 32.611] (II) NVIDIA(GPU-0): Not probing EDID on CRT-0.
[ 32.611] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 32.611] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
[ 32.611] (**) NVIDIA(0): all display devices.)
[ 35.614] (II) NVIDIA(GPU-0): Not probing EDID on CRT-0.
[ 35.614] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 35.614] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
[ 35.614] (**) NVIDIA(0): all display devices.)
[ 49.581] (II) NVIDIA(GPU-0): Not probing EDID on CRT-0.
[ 49.581] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 49.581] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
[ 49.581] (**) NVIDIA(0): all display devices.)
[ 51.800] (II) NVIDIA(GPU-0): Not probing EDID on CRT-0.
[ 51.800] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 51.800] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
[ 51.800] (**) NVIDIA(0): all display devices.)
[ 53.939] (II) NVIDIA(GPU-0): Not probing EDID on CRT-0.
[ 53.939] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 53.939] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
[ 53.939] (**) NVIDIA(0): all display devices.)
[ 77.369] (II) NVIDIA(0): Setting mode "Unknown-0:1360x768"
[ 79.984] (WW) NVIDIA(0): Specified panning domain height of 576 is smaller than
[ 79.984] (WW) NVIDIA(0): viewport height 768; adjustingOstatnio edytowany przez Shiny (2013-01-07 14:05:49)
Offline
#43 2013-01-07 14:08:20
sqrtek - Użytkownik
- sqrtek
- Użytkownik
- Skąd: /bin/true
- Zarejestrowany: 2012-06-14
Re: Problem z ustawieniem natywnej rozdzielczości monitora Benq G925 HDA
Gdyby nie udało Ci się ustawić rozdzielczości za pomocą xorga, to może warto by spróbować z xrandr? :)
"Nie pozwól by zgiełk opinii innych ludzi, zagłuszył Twój wewnętrzny głos" ~ Steve Jobs
Offline
#44 2013-01-07 14:18:44
Shiny - Użytkownik
- Shiny
- Użytkownik
- Skąd: Poland
- Zarejestrowany: 2013-01-05
Re: Problem z ustawieniem natywnej rozdzielczości monitora Benq G925 HDA
W jakim sensie "użyć xrandr"? Bo jeśli w takim:
Kod:
xrandr --newmode "1366x768" 60 1366 1436 1579 1792 768 771 774 798 +hsync +vsync
to niestety odpada, bo poza ponownym ustawieniem przez monitor rozdzielczości 1360x768 nic się nie dzieje.
@edit: Ogólnie samo użycie xrandr w terminalu powoduje odświeżenie obrazu, a wypluwa taki wynik:
Kod:
xrandr
Screen 0: minimum 8 x 8, current 1360 x 768, maximum 4096 x 4096
Unknown-0 connected 1360x768+0+0 (normal left inverted right x axis y axis) 0mm x 0mm
1024x768 75.0 + 70.1 60.0
1600x1024 60.2
1440x900 59.9
1360x768 60.0* 59.8
1280x960 60.0
1152x864 70.0 60.0
832x624 74.6
800x600 75.0 72.2 60.3 56.2
800x512 120.3
720x450 119.8
680x384 119.9 119.6
640x480 120.0 75.0 72.8 59.9
576x432 140.0 120.1
512x384 150.1 140.1 120.0
416x312 149.3
400x300 150.2 144.4 120.6 112.7
320x240 150.0 145.6 120.1
Unknown-1 disconnected (normal left inverted right x axis y axis)
Unknown-2 disconnected (normal left inverted right x axis y axis)
Unknown-3 disconnected (normal left inverted right x axis y axis)
Unknown-4 disconnected (normal left inverted right x axis y axis)
1366x768 (0x278) 60.0MHz
h: width 1366 start 1436 end 1579 total 1792 skew 0 clock 33.5KHz
v: height 768 start 771 end 774 total 798 clock 42.0HzOstatnio edytowany przez Shiny (2013-01-07 14:20:30)
Offline
#45 2013-01-07 14:25:37
ArnVaker - Kapelusznik
- ArnVaker
- Kapelusznik
- Skąd: Midgard
- Zarejestrowany: 2009-05-06
Re: Problem z ustawieniem natywnej rozdzielczości monitora Benq G925 HDA
Shiny napisał(-a):
No cóż, przy Twoich wartościach
To nie są moje wartości, tylko te co podałeś w pierwszym poście. ;)
Wygeneruj modeline:
Kod:
gtf 1366 768 60
I wstaw go w ten xorg.conf:
Kod:
Section "Monitor"
Identifier "Configured Monitor"
HorizSync 30.0 - 63.0
VertRefresh 50.0 - 76.0
# zamiast tej linijki wstaw modeline z powyższego polecenia
EndSection
Section "Device"
Identifier "Configured Video Device"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Option "UseEDID" "false"
Option "ModeValidation" "AllowNonEdidModes"
Option "metamodes" "1366x768_60"
EndSectionTen modeline co podawałeś wcześniej jest jakiś dziwny, odświeżania tam nie ma nawet.
Offline
#46 2013-01-07 14:44:33
Shiny - Użytkownik
- Shiny
- Użytkownik
- Skąd: Poland
- Zarejestrowany: 2013-01-05
Re: Problem z ustawieniem natywnej rozdzielczości monitora Benq G925 HDA
Jest problem, bo gdy generuję modeline poleceniem gtf, to terminal mi wypluwa takie oto ufo (korzystam z konsoli roota):
Kod:
root@user31-231:/home/shiny# gtf 1366 768 60 # 1368x768 @ 60.00 Hz (GTF) hsync: 47.70 kHz; pclk: 85.86 MHz Modeline "1368x768_60.00" 85.86 1368 1440 1584 1800 768 769 772 795 -HSync +Vsync
Jak widać, znów robi się... 1368 zamiast 1366, no ale nawet pomijając ten fakt, to dodanie tego modeline do xorga powoduje też dodanie tej rozdzielczości w ustawieniach nVidii.
Xorga dołączam, bo a nóż (a nawet nuż) widelec znów coś schrzaniłem:
Kod:
Section "Monitor"
Identifier "Configured Monitor"
HorizSync 30.0 - 63.0
VertRefresh 50.0 - 76.0
Modeline "1368x768_60.00" 85.86 1368 1440 1584 1800 768 769 772 795 -HSync +Vsync
EndSection
Section "Device"
Identifier "Configured Video Device"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Option "UseEDID" "false"
Option "ModeValidation" "AllowNonEdidModes"
Option "metamodes" "1366x768_60"
EndSectionlogi z uruchomienia też dołączę:
Kod:
[ 28.044]
X.Org X Server 1.12.4
Release Date: 2012-08-27
[ 28.044] X Protocol Version 11, Revision 0
[ 28.044] Build Operating System: Linux 2.6.32-5-amd64 i686 Debian
[ 28.044] Current Operating System: Linux user31-231 3.2.0-4-686-pae #1 SMP Debian 3.2.35-2 i686
[ 28.044] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-686-pae root=UUID=fa3a2ec7-1f4d-46a0-8866-9d5e295cd786 ro quiet
[ 28.044] Build Date: 29 November 2012 08:52:43PM
[ 28.044] xorg-server 2:1.12.4-4 (Julien Cristau <jcristau@debian.org>)
[ 28.044] Current version of pixman: 0.26.0
[ 28.044] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 28.045] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 28.045] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jan 7 14:39:42 2013
[ 28.071] (==) Using config file: "/etc/X11/xorg.conf"
[ 28.071] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 28.107] (==) No Layout section. Using the first Screen section.
[ 28.107] (**) |-->Screen "Default Screen" (0)
[ 28.107] (**) | |-->Monitor "Configured Monitor"
[ 28.118] (==) No device specified for screen "Default Screen".
Using the first device section listed.
[ 28.118] (**) | |-->Device "Configured Video Device"
[ 28.118] (==) Automatically adding devices
[ 28.118] (==) Automatically enabling devices
[ 28.152] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 28.152] Entry deleted from font path.
[ 28.182] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[ 28.182] Entry deleted from font path.
[ 28.182] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 28.182] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 28.182] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 28.182] (II) Loader magic: 0xb77685a0
[ 28.182] (II) Module ABI versions:
[ 28.182] X.Org ANSI C Emulation: 0.4
[ 28.182] X.Org Video Driver: 12.1
[ 28.182] X.Org XInput driver : 16.0
[ 28.182] X.Org Server Extension : 6.0
[ 28.183] (--) PCI:*(0:1:0:0) 10de:00f1:1682:2119 rev 162, Mem @ 0xfa000000/16777216, 0xe0000000/268435456, 0xfb000000/16777216, BIOS @ 0x????????/131072
[ 28.183] (II) Open ACPI successful (/var/run/acpid.socket)
[ 28.183] (II) LoadModule: "extmod"
[ 28.304] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 28.319] (II) Module extmod: vendor="X.Org Foundation"
[ 28.319] compiled for 1.12.4, module version = 1.0.0
[ 28.319] Module class: X.Org Server Extension
[ 28.319] ABI class: X.Org Server Extension, version 6.0
[ 28.319] (II) Loading extension SELinux
[ 28.320] (II) Loading extension MIT-SCREEN-SAVER
[ 28.320] (II) Loading extension XFree86-VidModeExtension
[ 28.320] (II) Loading extension XFree86-DGA
[ 28.320] (II) Loading extension DPMS
[ 28.320] (II) Loading extension XVideo
[ 28.320] (II) Loading extension XVideo-MotionCompensation
[ 28.320] (II) Loading extension X-Resource
[ 28.320] (II) LoadModule: "dbe"
[ 28.320] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 28.336] (II) Module dbe: vendor="X.Org Foundation"
[ 28.336] compiled for 1.12.4, module version = 1.0.0
[ 28.336] Module class: X.Org Server Extension
[ 28.336] ABI class: X.Org Server Extension, version 6.0
[ 28.336] (II) Loading extension DOUBLE-BUFFER
[ 28.336] (II) LoadModule: "glx"
[ 28.336] (II) Loading /usr/lib/xorg/modules/linux/libglx.so
[ 30.321] (II) Module glx: vendor="NVIDIA Corporation"
[ 30.321] compiled for 4.0.2, module version = 1.0.0
[ 30.321] Module class: X.Org Server Extension
[ 30.321] (II) NVIDIA GLX Module 304.64 Tue Oct 30 11:31:18 PDT 2012
[ 30.321] (II) Loading extension GLX
[ 30.321] (II) LoadModule: "record"
[ 30.322] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 30.362] (II) Module record: vendor="X.Org Foundation"
[ 30.362] compiled for 1.12.4, module version = 1.13.0
[ 30.362] Module class: X.Org Server Extension
[ 30.362] ABI class: X.Org Server Extension, version 6.0
[ 30.362] (II) Loading extension RECORD
[ 30.362] (II) LoadModule: "dri"
[ 30.362] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 30.392] (II) Module dri: vendor="X.Org Foundation"
[ 30.392] compiled for 1.12.4, module version = 1.0.0
[ 30.392] ABI class: X.Org Server Extension, version 6.0
[ 30.392] (II) Loading extension XFree86-DRI
[ 30.392] (II) LoadModule: "dri2"
[ 30.392] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 30.400] (II) Module dri2: vendor="X.Org Foundation"
[ 30.400] compiled for 1.12.4, module version = 1.2.0
[ 30.400] ABI class: X.Org Server Extension, version 6.0
[ 30.400] (II) Loading extension DRI2
[ 30.400] (II) LoadModule: "nvidia"
[ 30.400] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 30.655] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 30.655] compiled for 4.0.2, module version = 1.0.0
[ 30.655] Module class: X.Org Video Driver
[ 30.698] (II) NVIDIA dlloader X Driver 304.64 Tue Oct 30 11:11:05 PDT 2012
[ 30.698] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 30.704] (++) using VT number 7
[ 30.754] (II) Loading sub module "fb"
[ 30.754] (II) LoadModule: "fb"
[ 30.755] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 30.774] (II) Module fb: vendor="X.Org Foundation"
[ 30.774] compiled for 1.12.4, module version = 1.0.0
[ 30.774] ABI class: X.Org ANSI C Emulation, version 0.4
[ 30.774] (II) Loading sub module "wfb"
[ 30.774] (II) LoadModule: "wfb"
[ 30.775] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 30.789] (II) Module wfb: vendor="X.Org Foundation"
[ 30.789] compiled for 1.12.4, module version = 1.0.0
[ 30.789] ABI class: X.Org ANSI C Emulation, version 0.4
[ 30.790] (II) Loading sub module "ramdac"
[ 30.790] (II) LoadModule: "ramdac"
[ 30.790] (II) Module "ramdac" already built-in
[ 30.802] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen" for depth/fbbpp 24/32
[ 30.802] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 30.802] (==) NVIDIA(0): RGB weight 888
[ 30.802] (==) NVIDIA(0): Default visual is TrueColor
[ 30.803] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 30.803] (**) NVIDIA(0): Option "ModeValidation" "AllowNonEdidModes"
[ 30.803] (**) NVIDIA(0): Option "UseEDID" "false"
[ 30.803] (**) NVIDIA(0): Option "MetaModes" "1366x768_60"
[ 30.803] (**) NVIDIA(0): Enabling 2D acceleration
[ 30.803] (**) NVIDIA(0): Ignoring EDIDs
[ 32.232] (II) NVIDIA(GPU-0): Not probing EDID on CRT-0.
[ 32.235] (II) NVIDIA(0): NVIDIA GPU GeForce 6600 GT (NV43) at PCI:1:0:0 (GPU-0)
[ 32.235] (--) NVIDIA(0): Memory: 131072 kBytes
[ 32.235] (--) NVIDIA(0): VideoBIOS: 05.43.02.36.00
[ 32.235] (II) NVIDIA(0): Detected AGP rate: 8X
[ 32.235] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 32.235] (--) NVIDIA(0): Valid display device(s) on GeForce 6600 GT at PCI:1:0:0
[ 32.235] (--) NVIDIA(0): CRT-0 (connected)
[ 32.235] (--) NVIDIA(0): CRT-1
[ 32.235] (--) NVIDIA(0): TV-0
[ 32.235] (--) NVIDIA(0): DFP-0
[ 32.235] (--) NVIDIA(0): DFP-1
[ 32.235] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[ 32.235] (--) NVIDIA(0): CRT-1: 400.0 MHz maximum pixel clock
[ 32.235] (--) NVIDIA(0): TV-0: 400.0 MHz maximum pixel clock
[ 32.235] (--) NVIDIA(0): TV encoder: (null)
[ 32.235] (--) NVIDIA(0): DFP-0: 155.0 MHz maximum pixel clock
[ 32.235] (--) NVIDIA(0): DFP-0: Internal Single Link TMDS
[ 32.235] (--) NVIDIA(0): DFP-1: 155.0 MHz maximum pixel clock
[ 32.235] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
[ 32.236] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 32.236] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
[ 32.236] (**) NVIDIA(0): all display devices.)
[ 32.236] (II) NVIDIA(0): Mode Validation Overrides for CRT-0:
[ 32.236] (II) NVIDIA(0): AllowNonEdidModes
[ 32.241] (WW) NVIDIA(0): No valid modes for "1366x768_60"; removing.
[ 32.241] (WW) NVIDIA(0):
[ 32.241] (WW) NVIDIA(0): Unable to validate any modes; falling back to the default mode
[ 32.241] (WW) NVIDIA(0): "nvidia-auto-select".
[ 32.241] (WW) NVIDIA(0):
[ 32.241] (II) NVIDIA(0): Validated MetaModes:
[ 32.241] (II) NVIDIA(0): "CRT-0:nvidia-auto-select"
[ 32.241] (II) NVIDIA(0): Virtual screen size determined to be 1024 x 768
[ 32.247] (WW) NVIDIA(0): Unable to support custom viewPortOut 1024 x 576 +0 +96
[ 32.248] (WW) NVIDIA(0): Unable to get display device CRT-0's EDID; cannot compute DPI
[ 32.248] (WW) NVIDIA(0): from CRT-0's EDID.
[ 32.248] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[ 32.248] (--) Depth 24 pixmap format is 32 bpp
[ 32.257] (II) NVIDIA(0): Setting mode "CRT-0:nvidia-auto-select"
[ 32.362] (II) Loading extension NV-GLX
[ 32.436] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 32.436] (==) NVIDIA(0): Backing store disabled
[ 32.436] (==) NVIDIA(0): Silken mouse enabled
[ 32.436] (==) NVIDIA(0): DPMS enabled
[ 32.437] (II) Loading extension NV-CONTROL
[ 32.437] (II) Loading extension XINERAMA
[ 32.437] (II) Loading sub module "dri2"
[ 32.437] (II) LoadModule: "dri2"
[ 32.438] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 32.438] (II) Module dri2: vendor="X.Org Foundation"
[ 32.438] compiled for 1.12.4, module version = 1.2.0
[ 32.438] ABI class: X.Org Server Extension, version 6.0
[ 32.438] (II) NVIDIA(0): [DRI2] Setup complete
[ 32.438] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 32.438] (--) RandR disabled
[ 32.438] (II) Initializing built-in extension Generic Event Extension
[ 32.438] (II) Initializing built-in extension SHAPE
[ 32.438] (II) Initializing built-in extension MIT-SHM
[ 32.438] (II) Initializing built-in extension XInputExtension
[ 32.438] (II) Initializing built-in extension XTEST
[ 32.438] (II) Initializing built-in extension BIG-REQUESTS
[ 32.438] (II) Initializing built-in extension SYNC
[ 32.438] (II) Initializing built-in extension XKEYBOARD
[ 32.438] (II) Initializing built-in extension XC-MISC
[ 32.438] (II) Initializing built-in extension SECURITY
[ 32.438] (II) Initializing built-in extension XINERAMA
[ 32.438] (II) Initializing built-in extension XFIXES
[ 32.438] (II) Initializing built-in extension RENDER
[ 32.438] (II) Initializing built-in extension RANDR
[ 32.438] (II) Initializing built-in extension COMPOSITE
[ 32.438] (II) Initializing built-in extension DAMAGE
[ 32.438] (II) SELinux: Disabled on system
[ 32.443] (II) Initializing extension GLX
[ 32.783] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 32.783] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 32.783] (II) LoadModule: "evdev"
[ 32.784] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 32.797] (II) Module evdev: vendor="X.Org Foundation"
[ 32.797] compiled for 1.12.1, module version = 2.7.0
[ 32.797] Module class: X.Org XInput Driver
[ 32.797] ABI class: X.Org XInput driver, version 16.0
[ 32.797] (II) Using input driver 'evdev' for 'Power Button'
[ 32.797] (**) Power Button: always reports core events
[ 32.797] (**) evdev: Power Button: Device: "/dev/input/event5"
[ 32.797] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 32.797] (--) evdev: Power Button: Found keys
[ 32.797] (II) evdev: Power Button: Configuring as keyboard
[ 32.797] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5"
[ 32.797] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 32.797] (**) Option "xkb_rules" "evdev"
[ 32.797] (**) Option "xkb_model" "pc105"
[ 32.798] (**) Option "xkb_layout" "pl"
[ 32.847] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 32.847] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 32.847] (II) Using input driver 'evdev' for 'Power Button'
[ 32.847] (**) Power Button: always reports core events
[ 32.847] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 32.847] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 32.847] (--) evdev: Power Button: Found keys
[ 32.847] (II) evdev: Power Button: Configuring as keyboard
[ 32.847] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3/event3"
[ 32.847] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 32.847] (**) Option "xkb_rules" "evdev"
[ 32.847] (**) Option "xkb_model" "pc105"
[ 32.847] (**) Option "xkb_layout" "pl"
[ 32.848] (II) config/udev: Adding input device Sleep Button (/dev/input/event4)
[ 32.848] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 32.849] (II) Using input driver 'evdev' for 'Sleep Button'
[ 32.849] (**) Sleep Button: always reports core events
[ 32.849] (**) evdev: Sleep Button: Device: "/dev/input/event4"
[ 32.849] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 32.849] (--) evdev: Sleep Button: Found keys
[ 32.849] (II) evdev: Sleep Button: Configuring as keyboard
[ 32.849] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4/event4"
[ 32.849] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 32.849] (**) Option "xkb_rules" "evdev"
[ 32.849] (**) Option "xkb_model" "pc105"
[ 32.849] (**) Option "xkb_layout" "pl"
[ 32.850] (II) config/udev: Adding input device USB USB Keykoard (/dev/input/event0)
[ 32.850] (**) USB USB Keykoard: Applying InputClass "evdev keyboard catchall"
[ 32.850] (II) Using input driver 'evdev' for 'USB USB Keykoard'
[ 32.850] (**) USB USB Keykoard: always reports core events
[ 32.850] (**) evdev: USB USB Keykoard: Device: "/dev/input/event0"
[ 32.850] (--) evdev: USB USB Keykoard: Vendor 0x1a2c Product 0x23
[ 32.850] (--) evdev: USB USB Keykoard: Found keys
[ 32.850] (II) evdev: USB USB Keykoard: Configuring as keyboard
[ 32.850] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.0/usb2/2-1/2-1:1.0/input/input0/event0"
[ 32.850] (II) XINPUT: Adding extended input device "USB USB Keykoard" (type: KEYBOARD, id 9)
[ 32.850] (**) Option "xkb_rules" "evdev"
[ 32.850] (**) Option "xkb_model" "pc105"
[ 32.850] (**) Option "xkb_layout" "pl"
[ 32.851] (II) config/udev: Adding input device USB USB Keykoard (/dev/input/event1)
[ 32.851] (**) USB USB Keykoard: Applying InputClass "evdev keyboard catchall"
[ 32.851] (II) Using input driver 'evdev' for 'USB USB Keykoard'
[ 32.852] (**) USB USB Keykoard: always reports core events
[ 32.852] (**) evdev: USB USB Keykoard: Device: "/dev/input/event1"
[ 32.852] (--) evdev: USB USB Keykoard: Vendor 0x1a2c Product 0x23
[ 32.852] (--) evdev: USB USB Keykoard: Found 1 mouse buttons
[ 32.852] (--) evdev: USB USB Keykoard: Found scroll wheel(s)
[ 32.852] (--) evdev: USB USB Keykoard: Found relative axes
[ 32.852] (II) evdev: USB USB Keykoard: Forcing relative x/y axes to exist.
[ 32.852] (--) evdev: USB USB Keykoard: Found absolute axes
[ 32.852] (II) evdev: USB USB Keykoard: Forcing absolute x/y axes to exist.
[ 32.852] (--) evdev: USB USB Keykoard: Found keys
[ 32.852] (II) evdev: USB USB Keykoard: Configuring as mouse
[ 32.852] (II) evdev: USB USB Keykoard: Configuring as keyboard
[ 32.852] (II) evdev: USB USB Keykoard: Adding scrollwheel support
[ 32.852] (**) evdev: USB USB Keykoard: YAxisMapping: buttons 4 and 5
[ 32.852] (**) evdev: USB USB Keykoard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 32.852] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.0/usb2/2-1/2-1:1.1/input/input1/event1"
[ 32.852] (II) XINPUT: Adding extended input device "USB USB Keykoard" (type: KEYBOARD, id 10)
[ 32.852] (**) Option "xkb_rules" "evdev"
[ 32.852] (**) Option "xkb_model" "pc105"
[ 32.852] (**) Option "xkb_layout" "pl"
[ 32.853] (II) evdev: USB USB Keykoard: initialized for relative axes.
[ 32.853] (WW) evdev: USB USB Keykoard: ignoring absolute axes.
[ 32.853] (**) USB USB Keykoard: (accel) keeping acceleration scheme 1
[ 32.853] (**) USB USB Keykoard: (accel) acceleration profile 0
[ 32.853] (**) USB USB Keykoard: (accel) acceleration factor: 2.000
[ 32.853] (**) USB USB Keykoard: (accel) acceleration threshold: 4
[ 32.854] (II) config/udev: Adding input device USB Mouse (/dev/input/event2)
[ 32.854] (**) USB Mouse : Applying InputClass "evdev pointer catchall"
[ 32.854] (II) Using input driver 'evdev' for 'USB Mouse '
[ 32.854] (**) USB Mouse : always reports core events
[ 32.854] (**) evdev: USB Mouse : Device: "/dev/input/event2"
[ 32.854] (--) evdev: USB Mouse : Vendor 0x5e3 Product 0x1205
[ 32.854] (--) evdev: USB Mouse : Found 9 mouse buttons
[ 32.854] (--) evdev: USB Mouse : Found scroll wheel(s)
[ 32.854] (--) evdev: USB Mouse : Found relative axes
[ 32.854] (--) evdev: USB Mouse : Found x and y relative axes
[ 32.854] (II) evdev: USB Mouse : Configuring as mouse
[ 32.854] (II) evdev: USB Mouse : Adding scrollwheel support
[ 32.854] (**) evdev: USB Mouse : YAxisMapping: buttons 4 and 5
[ 32.854] (**) evdev: USB Mouse : EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 32.854] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2:1.0/input/input2/event2"
[ 32.854] (II) XINPUT: Adding extended input device "USB Mouse " (type: MOUSE, id 11)
[ 32.854] (II) evdev: USB Mouse : initialized for relative axes.
[ 32.854] (**) USB Mouse : (accel) keeping acceleration scheme 1
[ 32.855] (**) USB Mouse : (accel) acceleration profile 0
[ 32.855] (**) USB Mouse : (accel) acceleration factor: 2.000
[ 32.855] (**) USB Mouse : (accel) acceleration threshold: 4
[ 32.855] (II) config/udev: Adding input device USB Mouse (/dev/input/mouse0)
[ 32.855] (II) No input driver specified, ignoring this device.
[ 32.855] (II) This device may have been added with another device file.
[ 32.856] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 32.856] (II) No input driver specified, ignoring this device.
[ 32.856] (II) This device may have been added with another device file.
[ 33.004] (II) NVIDIA(GPU-0): Not probing EDID on CRT-0.
[ 33.004] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 33.004] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
[ 33.004] (**) NVIDIA(0): all display devices.)
[ 33.004] (II) NVIDIA(0): Mode Validation Overrides for CRT-0:
[ 33.004] (II) NVIDIA(0): AllowNonEdidModes
[ 36.032] (II) NVIDIA(GPU-0): Not probing EDID on CRT-0.
[ 36.032] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 36.032] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
[ 36.032] (**) NVIDIA(0): all display devices.)
[ 36.032] (II) NVIDIA(0): Mode Validation Overrides for CRT-0:
[ 36.032] (II) NVIDIA(0): AllowNonEdidModes
[ 51.686] (II) NVIDIA(GPU-0): Not probing EDID on CRT-0.
[ 51.686] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 51.686] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
[ 51.686] (**) NVIDIA(0): all display devices.)
[ 51.686] (II) NVIDIA(0): Mode Validation Overrides for CRT-0:
[ 51.686] (II) NVIDIA(0): AllowNonEdidModes
[ 54.201] (II) NVIDIA(GPU-0): Not probing EDID on CRT-0.
[ 54.201] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 54.201] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
[ 54.201] (**) NVIDIA(0): all display devices.)
[ 54.201] (II) NVIDIA(0): Mode Validation Overrides for CRT-0:
[ 54.201] (II) NVIDIA(0): AllowNonEdidModes
[ 56.106] (II) NVIDIA(GPU-0): Not probing EDID on CRT-0.
[ 56.106] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 56.106] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
[ 56.106] (**) NVIDIA(0): all display devices.)
[ 56.107] (II) NVIDIA(0): Mode Validation Overrides for CRT-0:
[ 56.107] (II) NVIDIA(0): AllowNonEdidModes
[ 130.676] (II) NVIDIA(0): Setting mode "Unknown-0:1368x768_60.00"
[ 133.586] (WW) NVIDIA(0): Specified panning domain height of 576 is smaller than
[ 133.586] (WW) NVIDIA(0): viewport height 768; adjustingOstatnio edytowany przez Shiny (2013-01-07 14:51:57)
Offline
#47 2013-01-07 14:56:43
ArnVaker - Kapelusznik
- ArnVaker
- Kapelusznik
- Skąd: Midgard
- Zarejestrowany: 2009-05-06
Re: Problem z ustawieniem natywnej rozdzielczości monitora Benq G925 HDA
Widać w sieci, że z tym modeline faktycznie jest jakiś problem, o tutaj na przykład: http://ubuntuforums.org/showthread.php?t=1480033
Spróbuj taki jak tam gość sobie obliczył:
Kod:
ModeLine "1366x768" 84.75 1366 1440 1584 1776 768 769 772 800 -hsync +vsync
Tylko on też w sumie dziwny jest. ;)
Kod:
Section "Monitor"
Identifier "Configured Monitor"
HorizSync 30.0 - 63.0
VertRefresh 50.0 - 76.0
ModeLine "1366x768" 84.75 1366 1440 1584 1776 768 769 772 800 -hsync +vsync
EndSection
Section "Device"
Identifier "Configured Video Device"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Option "UseEDID" "false"
Option "ModeValidation" "AllowNonEdidModes"
Option "metamodes" "1366x768_60"
EndSectionOffline
#48 2013-01-07 15:02:56
Shiny - Użytkownik
- Shiny
- Użytkownik
- Skąd: Poland
- Zarejestrowany: 2013-01-05
Re: Problem z ustawieniem natywnej rozdzielczości monitora Benq G925 HDA
Zrobiłem tak i... teraz nie mam rozdzielczości 1368x768, ani też natywnej.
Ostatnio edytowany przez Shiny (2013-01-07 15:03:30)
Offline
#49 2013-01-07 15:06:40
ArnVaker - Kapelusznik
- ArnVaker
- Kapelusznik
- Skąd: Midgard
- Zarejestrowany: 2009-05-06
Re: Problem z ustawieniem natywnej rozdzielczości monitora Benq G925 HDA
Jeszcze tak zobacz:
Kod:
Section "Monitor"
Identifier "Configured Monitor"
HorizSync 30.0 - 63.0
VertRefresh 50.0 - 76.0
ModeLine "1366x768" 84.75 1366 1440 1584 1776 768 769 772 800 -hsync +vsync
EndSection
Section "Device"
Identifier "Configured Video Device"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Option "UseEDID" "false"
Option "ModeValidation" "AllowNonEdidModes"
Option "metamodes" "1366x768"
EndSectionJak nie to wrzuć Xorg.0.log i sprawdzaj te opcje co tamtemu użytkownikowi w końcu pomogły.
PS Czułki opadają.
Offline
#50 2013-01-07 15:17:40
Shiny - Użytkownik
- Shiny
- Użytkownik
- Skąd: Poland
- Zarejestrowany: 2013-01-05
Re: Problem z ustawieniem natywnej rozdzielczości monitora Benq G925 HDA
Mi już nerwy wysiadają powoli przez ten monitor, tak szczerze mówiąc. Ale cóż, zwyczajowo (to chyba taka tradycja będzie z mojej strony) umieszczę logi, bo oczywiście ten xorg nie zadziałał.
Kod:
[ 27.596]
X.Org X Server 1.12.4
Release Date: 2012-08-27
[ 27.596] X Protocol Version 11, Revision 0
[ 27.596] Build Operating System: Linux 2.6.32-5-amd64 i686 Debian
[ 27.596] Current Operating System: Linux user31-231 3.2.0-4-686-pae #1 SMP Debian 3.2.35-2 i686
[ 27.596] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-686-pae root=UUID=fa3a2ec7-1f4d-46a0-8866-9d5e295cd786 ro quiet
[ 27.596] Build Date: 29 November 2012 08:52:43PM
[ 27.596] xorg-server 2:1.12.4-4 (Julien Cristau <jcristau@debian.org>)
[ 27.596] Current version of pixman: 0.26.0
[ 27.596] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 27.596] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 27.596] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jan 7 15:13:54 2013
[ 27.616] (==) Using config file: "/etc/X11/xorg.conf"
[ 27.616] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 27.649] (==) No Layout section. Using the first Screen section.
[ 27.649] (**) |-->Screen "Default Screen" (0)
[ 27.649] (**) | |-->Monitor "Configured Monitor"
[ 27.663] (==) No device specified for screen "Default Screen".
Using the first device section listed.
[ 27.663] (**) | |-->Device "Configured Video Device"
[ 27.663] (==) Automatically adding devices
[ 27.663] (==) Automatically enabling devices
[ 27.805] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 27.805] Entry deleted from font path.
[ 27.918] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[ 27.918] Entry deleted from font path.
[ 27.918] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 27.918] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 27.918] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 27.918] (II) Loader magic: 0xb77515a0
[ 27.919] (II) Module ABI versions:
[ 27.919] X.Org ANSI C Emulation: 0.4
[ 27.919] X.Org Video Driver: 12.1
[ 27.919] X.Org XInput driver : 16.0
[ 27.919] X.Org Server Extension : 6.0
[ 27.920] (--) PCI:*(0:1:0:0) 10de:00f1:1682:2119 rev 162, Mem @ 0xfa000000/16777216, 0xe0000000/268435456, 0xfb000000/16777216, BIOS @ 0x????????/131072
[ 27.920] (II) Open ACPI successful (/var/run/acpid.socket)
[ 27.920] (II) LoadModule: "extmod"
[ 28.040] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 28.104] (II) Module extmod: vendor="X.Org Foundation"
[ 28.104] compiled for 1.12.4, module version = 1.0.0
[ 28.104] Module class: X.Org Server Extension
[ 28.104] ABI class: X.Org Server Extension, version 6.0
[ 28.104] (II) Loading extension SELinux
[ 28.104] (II) Loading extension MIT-SCREEN-SAVER
[ 28.104] (II) Loading extension XFree86-VidModeExtension
[ 28.104] (II) Loading extension XFree86-DGA
[ 28.104] (II) Loading extension DPMS
[ 28.104] (II) Loading extension XVideo
[ 28.104] (II) Loading extension XVideo-MotionCompensation
[ 28.104] (II) Loading extension X-Resource
[ 28.104] (II) LoadModule: "dbe"
[ 28.105] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 28.114] (II) Module dbe: vendor="X.Org Foundation"
[ 28.114] compiled for 1.12.4, module version = 1.0.0
[ 28.114] Module class: X.Org Server Extension
[ 28.114] ABI class: X.Org Server Extension, version 6.0
[ 28.114] (II) Loading extension DOUBLE-BUFFER
[ 28.114] (II) LoadModule: "glx"
[ 28.114] (II) Loading /usr/lib/xorg/modules/linux/libglx.so
[ 30.057] (II) Module glx: vendor="NVIDIA Corporation"
[ 30.058] compiled for 4.0.2, module version = 1.0.0
[ 30.058] Module class: X.Org Server Extension
[ 30.058] (II) NVIDIA GLX Module 304.64 Tue Oct 30 11:31:18 PDT 2012
[ 30.058] (II) Loading extension GLX
[ 30.058] (II) LoadModule: "record"
[ 30.058] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 30.157] (II) Module record: vendor="X.Org Foundation"
[ 30.157] compiled for 1.12.4, module version = 1.13.0
[ 30.157] Module class: X.Org Server Extension
[ 30.157] ABI class: X.Org Server Extension, version 6.0
[ 30.157] (II) Loading extension RECORD
[ 30.157] (II) LoadModule: "dri"
[ 30.157] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 30.249] (II) Module dri: vendor="X.Org Foundation"
[ 30.249] compiled for 1.12.4, module version = 1.0.0
[ 30.249] ABI class: X.Org Server Extension, version 6.0
[ 30.249] (II) Loading extension XFree86-DRI
[ 30.249] (II) LoadModule: "dri2"
[ 30.249] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 30.256] (II) Module dri2: vendor="X.Org Foundation"
[ 30.256] compiled for 1.12.4, module version = 1.2.0
[ 30.256] ABI class: X.Org Server Extension, version 6.0
[ 30.256] (II) Loading extension DRI2
[ 30.256] (II) LoadModule: "nvidia"
[ 30.257] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 30.413] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 30.413] compiled for 4.0.2, module version = 1.0.0
[ 30.413] Module class: X.Org Video Driver
[ 30.500] (II) NVIDIA dlloader X Driver 304.64 Tue Oct 30 11:11:05 PDT 2012
[ 30.500] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 30.524] (++) using VT number 7
[ 30.566] (II) Loading sub module "fb"
[ 30.566] (II) LoadModule: "fb"
[ 30.566] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 30.585] (II) Module fb: vendor="X.Org Foundation"
[ 30.585] compiled for 1.12.4, module version = 1.0.0
[ 30.585] ABI class: X.Org ANSI C Emulation, version 0.4
[ 30.586] (II) Loading sub module "wfb"
[ 30.586] (II) LoadModule: "wfb"
[ 30.586] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 30.592] (II) Module wfb: vendor="X.Org Foundation"
[ 30.592] compiled for 1.12.4, module version = 1.0.0
[ 30.592] ABI class: X.Org ANSI C Emulation, version 0.4
[ 30.593] (II) Loading sub module "ramdac"
[ 30.593] (II) LoadModule: "ramdac"
[ 30.593] (II) Module "ramdac" already built-in
[ 30.614] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen" for depth/fbbpp 24/32
[ 30.614] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 30.614] (==) NVIDIA(0): RGB weight 888
[ 30.614] (==) NVIDIA(0): Default visual is TrueColor
[ 30.614] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 30.614] (**) NVIDIA(0): Option "ModeValidation" "AllowNonEdidModes"
[ 30.614] (**) NVIDIA(0): Option "UseEDID" "false"
[ 30.615] (**) NVIDIA(0): Option "MetaModes" "1366x768"
[ 30.615] (**) NVIDIA(0): Enabling 2D acceleration
[ 30.615] (**) NVIDIA(0): Ignoring EDIDs
[ 32.046] (II) NVIDIA(GPU-0): Not probing EDID on CRT-0.
[ 32.049] (II) NVIDIA(0): NVIDIA GPU GeForce 6600 GT (NV43) at PCI:1:0:0 (GPU-0)
[ 32.049] (--) NVIDIA(0): Memory: 131072 kBytes
[ 32.049] (--) NVIDIA(0): VideoBIOS: 05.43.02.36.00
[ 32.049] (II) NVIDIA(0): Detected AGP rate: 8X
[ 32.049] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 32.049] (--) NVIDIA(0): Valid display device(s) on GeForce 6600 GT at PCI:1:0:0
[ 32.049] (--) NVIDIA(0): CRT-0 (connected)
[ 32.049] (--) NVIDIA(0): CRT-1
[ 32.049] (--) NVIDIA(0): TV-0
[ 32.049] (--) NVIDIA(0): DFP-0
[ 32.049] (--) NVIDIA(0): DFP-1
[ 32.049] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[ 32.049] (--) NVIDIA(0): CRT-1: 400.0 MHz maximum pixel clock
[ 32.050] (--) NVIDIA(0): TV-0: 400.0 MHz maximum pixel clock
[ 32.050] (--) NVIDIA(0): TV encoder: (null)
[ 32.050] (--) NVIDIA(0): DFP-0: 155.0 MHz maximum pixel clock
[ 32.050] (--) NVIDIA(0): DFP-0: Internal Single Link TMDS
[ 32.050] (--) NVIDIA(0): DFP-1: 155.0 MHz maximum pixel clock
[ 32.050] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
[ 32.050] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 32.050] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
[ 32.050] (**) NVIDIA(0): all display devices.)
[ 32.050] (II) NVIDIA(0): Mode Validation Overrides for CRT-0:
[ 32.050] (II) NVIDIA(0): AllowNonEdidModes
[ 32.051] (WW) NVIDIA(0): No valid modes for "1366x768"; removing.
[ 32.051] (WW) NVIDIA(0):
[ 32.051] (WW) NVIDIA(0): Unable to validate any modes; falling back to the default mode
[ 32.051] (WW) NVIDIA(0): "nvidia-auto-select".
[ 32.051] (WW) NVIDIA(0):
[ 32.051] (II) NVIDIA(0): Validated MetaModes:
[ 32.051] (II) NVIDIA(0): "CRT-0:nvidia-auto-select"
[ 32.051] (II) NVIDIA(0): Virtual screen size determined to be 1024 x 768
[ 32.057] (WW) NVIDIA(0): Unable to support custom viewPortOut 1024 x 576 +0 +96
[ 32.057] (WW) NVIDIA(0): Unable to get display device CRT-0's EDID; cannot compute DPI
[ 32.057] (WW) NVIDIA(0): from CRT-0's EDID.
[ 32.057] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[ 32.057] (--) Depth 24 pixmap format is 32 bpp
[ 32.067] (II) NVIDIA(0): Setting mode "CRT-0:nvidia-auto-select"
[ 32.182] (II) Loading extension NV-GLX
[ 32.239] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 32.239] (==) NVIDIA(0): Backing store disabled
[ 32.239] (==) NVIDIA(0): Silken mouse enabled
[ 32.240] (==) NVIDIA(0): DPMS enabled
[ 32.240] (II) Loading extension NV-CONTROL
[ 32.240] (II) Loading extension XINERAMA
[ 32.240] (II) Loading sub module "dri2"
[ 32.240] (II) LoadModule: "dri2"
[ 32.241] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 32.241] (II) Module dri2: vendor="X.Org Foundation"
[ 32.241] compiled for 1.12.4, module version = 1.2.0
[ 32.241] ABI class: X.Org Server Extension, version 6.0
[ 32.241] (II) NVIDIA(0): [DRI2] Setup complete
[ 32.241] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 32.241] (--) RandR disabled
[ 32.241] (II) Initializing built-in extension Generic Event Extension
[ 32.241] (II) Initializing built-in extension SHAPE
[ 32.241] (II) Initializing built-in extension MIT-SHM
[ 32.241] (II) Initializing built-in extension XInputExtension
[ 32.241] (II) Initializing built-in extension XTEST
[ 32.241] (II) Initializing built-in extension BIG-REQUESTS
[ 32.241] (II) Initializing built-in extension SYNC
[ 32.241] (II) Initializing built-in extension XKEYBOARD
[ 32.241] (II) Initializing built-in extension XC-MISC
[ 32.241] (II) Initializing built-in extension SECURITY
[ 32.241] (II) Initializing built-in extension XINERAMA
[ 32.242] (II) Initializing built-in extension XFIXES
[ 32.242] (II) Initializing built-in extension RENDER
[ 32.242] (II) Initializing built-in extension RANDR
[ 32.242] (II) Initializing built-in extension COMPOSITE
[ 32.242] (II) Initializing built-in extension DAMAGE
[ 32.242] (II) SELinux: Disabled on system
[ 32.246] (II) Initializing extension GLX
[ 32.595] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 32.595] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 32.595] (II) LoadModule: "evdev"
[ 32.595] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 32.609] (II) Module evdev: vendor="X.Org Foundation"
[ 32.609] compiled for 1.12.1, module version = 2.7.0
[ 32.609] Module class: X.Org XInput Driver
[ 32.609] ABI class: X.Org XInput driver, version 16.0
[ 32.609] (II) Using input driver 'evdev' for 'Power Button'
[ 32.609] (**) Power Button: always reports core events
[ 32.609] (**) evdev: Power Button: Device: "/dev/input/event5"
[ 32.609] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 32.609] (--) evdev: Power Button: Found keys
[ 32.609] (II) evdev: Power Button: Configuring as keyboard
[ 32.609] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5"
[ 32.609] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 32.609] (**) Option "xkb_rules" "evdev"
[ 32.609] (**) Option "xkb_model" "pc105"
[ 32.609] (**) Option "xkb_layout" "pl"
[ 32.659] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 32.659] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 32.659] (II) Using input driver 'evdev' for 'Power Button'
[ 32.659] (**) Power Button: always reports core events
[ 32.659] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 32.659] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 32.659] (--) evdev: Power Button: Found keys
[ 32.659] (II) evdev: Power Button: Configuring as keyboard
[ 32.659] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3/event3"
[ 32.659] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 32.659] (**) Option "xkb_rules" "evdev"
[ 32.659] (**) Option "xkb_model" "pc105"
[ 32.659] (**) Option "xkb_layout" "pl"
[ 32.660] (II) config/udev: Adding input device Sleep Button (/dev/input/event4)
[ 32.660] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 32.660] (II) Using input driver 'evdev' for 'Sleep Button'
[ 32.660] (**) Sleep Button: always reports core events
[ 32.660] (**) evdev: Sleep Button: Device: "/dev/input/event4"
[ 32.660] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 32.660] (--) evdev: Sleep Button: Found keys
[ 32.660] (II) evdev: Sleep Button: Configuring as keyboard
[ 32.660] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4/event4"
[ 32.660] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 32.660] (**) Option "xkb_rules" "evdev"
[ 32.660] (**) Option "xkb_model" "pc105"
[ 32.661] (**) Option "xkb_layout" "pl"
[ 32.662] (II) config/udev: Adding input device USB USB Keykoard (/dev/input/event0)
[ 32.662] (**) USB USB Keykoard: Applying InputClass "evdev keyboard catchall"
[ 32.662] (II) Using input driver 'evdev' for 'USB USB Keykoard'
[ 32.662] (**) USB USB Keykoard: always reports core events
[ 32.662] (**) evdev: USB USB Keykoard: Device: "/dev/input/event0"
[ 32.662] (--) evdev: USB USB Keykoard: Vendor 0x1a2c Product 0x23
[ 32.662] (--) evdev: USB USB Keykoard: Found keys
[ 32.662] (II) evdev: USB USB Keykoard: Configuring as keyboard
[ 32.662] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.0/usb2/2-1/2-1:1.0/input/input0/event0"
[ 32.662] (II) XINPUT: Adding extended input device "USB USB Keykoard" (type: KEYBOARD, id 9)
[ 32.662] (**) Option "xkb_rules" "evdev"
[ 32.662] (**) Option "xkb_model" "pc105"
[ 32.662] (**) Option "xkb_layout" "pl"
[ 32.663] (II) config/udev: Adding input device USB USB Keykoard (/dev/input/event1)
[ 32.663] (**) USB USB Keykoard: Applying InputClass "evdev keyboard catchall"
[ 32.663] (II) Using input driver 'evdev' for 'USB USB Keykoard'
[ 32.663] (**) USB USB Keykoard: always reports core events
[ 32.663] (**) evdev: USB USB Keykoard: Device: "/dev/input/event1"
[ 32.663] (--) evdev: USB USB Keykoard: Vendor 0x1a2c Product 0x23
[ 32.663] (--) evdev: USB USB Keykoard: Found 1 mouse buttons
[ 32.663] (--) evdev: USB USB Keykoard: Found scroll wheel(s)
[ 32.663] (--) evdev: USB USB Keykoard: Found relative axes
[ 32.663] (II) evdev: USB USB Keykoard: Forcing relative x/y axes to exist.
[ 32.663] (--) evdev: USB USB Keykoard: Found absolute axes
[ 32.663] (II) evdev: USB USB Keykoard: Forcing absolute x/y axes to exist.
[ 32.663] (--) evdev: USB USB Keykoard: Found keys
[ 32.664] (II) evdev: USB USB Keykoard: Configuring as mouse
[ 32.664] (II) evdev: USB USB Keykoard: Configuring as keyboard
[ 32.664] (II) evdev: USB USB Keykoard: Adding scrollwheel support
[ 32.664] (**) evdev: USB USB Keykoard: YAxisMapping: buttons 4 and 5
[ 32.664] (**) evdev: USB USB Keykoard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 32.664] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.0/usb2/2-1/2-1:1.1/input/input1/event1"
[ 32.664] (II) XINPUT: Adding extended input device "USB USB Keykoard" (type: KEYBOARD, id 10)
[ 32.664] (**) Option "xkb_rules" "evdev"
[ 32.664] (**) Option "xkb_model" "pc105"
[ 32.664] (**) Option "xkb_layout" "pl"
[ 32.664] (II) evdev: USB USB Keykoard: initialized for relative axes.
[ 32.664] (WW) evdev: USB USB Keykoard: ignoring absolute axes.
[ 32.665] (**) USB USB Keykoard: (accel) keeping acceleration scheme 1
[ 32.665] (**) USB USB Keykoard: (accel) acceleration profile 0
[ 32.665] (**) USB USB Keykoard: (accel) acceleration factor: 2.000
[ 32.665] (**) USB USB Keykoard: (accel) acceleration threshold: 4
[ 32.665] (II) config/udev: Adding input device USB Mouse (/dev/input/event2)
[ 32.665] (**) USB Mouse : Applying InputClass "evdev pointer catchall"
[ 32.665] (II) Using input driver 'evdev' for 'USB Mouse '
[ 32.665] (**) USB Mouse : always reports core events
[ 32.665] (**) evdev: USB Mouse : Device: "/dev/input/event2"
[ 32.666] (--) evdev: USB Mouse : Vendor 0x5e3 Product 0x1205
[ 32.666] (--) evdev: USB Mouse : Found 9 mouse buttons
[ 32.666] (--) evdev: USB Mouse : Found scroll wheel(s)
[ 32.666] (--) evdev: USB Mouse : Found relative axes
[ 32.666] (--) evdev: USB Mouse : Found x and y relative axes
[ 32.666] (II) evdev: USB Mouse : Configuring as mouse
[ 32.666] (II) evdev: USB Mouse : Adding scrollwheel support
[ 32.666] (**) evdev: USB Mouse : YAxisMapping: buttons 4 and 5
[ 32.666] (**) evdev: USB Mouse : EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 32.666] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2:1.0/input/input2/event2"
[ 32.666] (II) XINPUT: Adding extended input device "USB Mouse " (type: MOUSE, id 11)
[ 32.666] (II) evdev: USB Mouse : initialized for relative axes.
[ 32.666] (**) USB Mouse : (accel) keeping acceleration scheme 1
[ 32.666] (**) USB Mouse : (accel) acceleration profile 0
[ 32.666] (**) USB Mouse : (accel) acceleration factor: 2.000
[ 32.666] (**) USB Mouse : (accel) acceleration threshold: 4
[ 32.667] (II) config/udev: Adding input device USB Mouse (/dev/input/mouse0)
[ 32.667] (II) No input driver specified, ignoring this device.
[ 32.667] (II) This device may have been added with another device file.
[ 32.667] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 32.667] (II) No input driver specified, ignoring this device.
[ 32.667] (II) This device may have been added with another device file.
[ 32.816] (II) NVIDIA(GPU-0): Not probing EDID on CRT-0.
[ 32.816] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 32.816] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
[ 32.816] (**) NVIDIA(0): all display devices.)
[ 32.816] (II) NVIDIA(0): Mode Validation Overrides for CRT-0:
[ 32.816] (II) NVIDIA(0): AllowNonEdidModes
[ 35.827] (II) NVIDIA(GPU-0): Not probing EDID on CRT-0.
[ 35.827] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 35.827] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
[ 35.827] (**) NVIDIA(0): all display devices.)
[ 35.827] (II) NVIDIA(0): Mode Validation Overrides for CRT-0:
[ 35.827] (II) NVIDIA(0): AllowNonEdidModes
[ 56.198] (II) NVIDIA(GPU-0): Not probing EDID on CRT-0.
[ 56.217] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 56.217] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
[ 56.217] (**) NVIDIA(0): all display devices.)
[ 56.217] (II) NVIDIA(0): Mode Validation Overrides for CRT-0:
[ 56.217] (II) NVIDIA(0): AllowNonEdidModes
[ 58.527] (II) NVIDIA(GPU-0): Not probing EDID on CRT-0.
[ 58.527] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 58.527] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
[ 58.527] (**) NVIDIA(0): all display devices.)
[ 58.527] (II) NVIDIA(0): Mode Validation Overrides for CRT-0:
[ 58.527] (II) NVIDIA(0): AllowNonEdidModes
[ 60.869] (II) NVIDIA(GPU-0): Not probing EDID on CRT-0.
[ 60.869] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 60.869] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
[ 60.869] (**) NVIDIA(0): all display devices.)
[ 60.869] (II) NVIDIA(0): Mode Validation Overrides for CRT-0:
[ 60.869] (II) NVIDIA(0): AllowNonEdidModes
[ 85.572] (II) NVIDIA(0): Setting mode "Unknown-0:1360x768"
[ 87.798] (WW) NVIDIA(0): Specified panning domain height of 576 is smaller than
[ 87.798] (WW) NVIDIA(0): viewport height 768; adjustingOffline
- Forum Debian Users Gang
- » Instalacja i podstawowa konfiguracja
- » Problem z ustawieniem natywnej rozdzielczości monitora Benq G925 HDA