Forum Debian Users Gang

#
# /etc/proftpd/proftpd.conf -- This is a basic ProFTPD configuration file.
# To really apply changes reload proftpd after modifications.
# 

# Includes DSO modules
Include /etc/proftpd/modules.conf

# Set off to disable IPv6 support which is annoying on IPv4 only boxes.
UseIPv6                off
# If set on you can experience a longer connection delay in many cases.
IdentLookups            off

ServerName            "Debian"
ServerType            standalone
DeferWelcome            off

MultilineRFC2228        on
DefaultServer            on
ShowSymlinks            on

TimeoutNoTransfer        600
TimeoutStalled            600
TimeoutIdle            1200

DisplayLogin                    welcome.msg
DisplayChdir                   .message true
ListOptions                    "-l"

DenyFilter            \*.*/
PathDenyFilter "(\.ftpaccess)$"

UseReverseDNS off

# Use this to jail all users in their homes 
# DefaultRoot            ~

# Users require a valid shell listed in /etc/shells to login.
# Use this directive to release that constrain.
# RequireValidShell        off

# Port 21 is the standard FTP port.
Port                21

# In some cases you have to specify passive ports range to by-pass
# firewall limitations. Ephemeral ports can be used for that, but
# feel free to use a more narrow range.
# PassivePorts                  49152 65534

# If your host was NATted, this option is useful in order to
# allow passive tranfers to work. You have to use your public
# address and opening the passive ports used on your firewall as well.
# MasqueradeAddress        1.2.3.4

# This is useful for masquerading address with dynamic IPs:
# refresh any configured MasqueradeAddress directives every 8 hours
<IfModule mod_dynmasq.c>
# DynMasqRefresh 28800
</IfModule>

# To prevent DoS attacks, set the maximum number of child processes
# to 30.  If you need to allow more than 30 concurrent connections
# at once, simply increase this value.  Note that this ONLY works
# in standalone mode, in inetd mode you should use an inetd server
# that allows you to limit maximum number of processes per service
# (such as xinetd)
MaxInstances            30

# Set the user and group that the server normally runs at.
User                proftpd
Group                nogroup

# Umask 022 is a good standard umask to prevent new files and dirs
# (second parm) from being group and world writable.
Umask                022  022
# Normally, we want files to be overwriteable.
AllowOverwrite            on

# Uncomment this if you are using NIS or LDAP via NSS to retrieve passwords:
# PersistentPasswd        off

# This is required to use both PAM-based authentication and local passwords
# AuthOrder            mod_auth_pam.c* mod_auth_unix.c

# Be warned: use of this directive impacts CPU average load!
# Uncomment this if you like to see progress and transfer rate with ftpwho
# in downloads. That is not needed for uploads rates.
#
# UseSendFile            off

TransferLog /var/log/proftpd/xferlog
SystemLog   /var/log/proftpd/proftpd.log

#<IfModule mod_quotatab.c>
#QuotaEngine off
#</IfModule>

<IfModule mod_ratio.c>
Ratios off
</IfModule>


# Delay engine reduces impact of the so-called Timing Attack described in
# http://security.lss.hr/index.php?page=details&ID=LSS-2004-10-02
# It is on by default. 
<IfModule mod_delay.c>
DelayEngine off
</IfModule>

<IfModule mod_ctrls.c>
ControlsEngine        off
ControlsMaxClients    2
ControlsLog           /var/log/proftpd/controls.log
ControlsInterval      5
ControlsSocket        /var/run/proftpd/proftpd.sock
</IfModule>

<IfModule mod_ctrls_admin.c>
AdminControlsEngine off
</IfModule>

#
# Alternative authentication frameworks
#
#Include /etc/proftpd/ldap.conf
#Include /etc/proftpd/sql.conf

#
# This is used for FTPS connections
#
#Include /etc/proftpd/tls.conf

#
# Useful to keep VirtualHost/VirtualRoot directives separated
#
#Include /etc/proftpd/virtuals.con

DefaultRoot ~

SQLBackend              mysql
# The passwords in MySQL are encrypted using CRYPT
SQLAuthTypes            Plaintext Crypt
SQLAuthenticate         users


# used to connect to the database
# databasename@host database_user user_password
SQLConnectInfo  baza@ip user pass


# Here we tell ProFTPd the names of the database columns in the "usertable"
# we want it to interact with. Match the names with those in the db
SQLUserInfo     ftpuser userid passwd uid gid "CONCAT('/home/', homedir) AS homedir" shell
SQLUserWhereClause "status=1"

# Here we tell ProFTPd the names of the database columns in the "grouptable"
# we want it to interact with. Again the names match with those in the db
SQLGroupInfo    ftpgroup groupname gid members

# set min UID and GID - otherwise these are 999 each
SQLMinID        500

# create a user's home directory on demand if it doesn't exist
CreateHome off

# Update count every time user logs in
SQLLog PASS updatecount
SQLNamedQuery updatecount UPDATE "count=count+1, accessed=now() WHERE userid='%u'" ftpuser

# Update modified everytime user uploads or deletes a file
SQLLog  STOR,DELE modified
SQLNamedQuery modified UPDATE "modified=now() WHERE userid='%u'" ftpuser

# User quotas
# ===========
QuotaEngine on
QuotaDirectoryTally on
QuotaDisplayUnits Mb
QuotaShowQuotas on

SQLNamedQuery get-quota-limit SELECT "name, quota_type, per_session, limit_type, bytes_in_avail, bytes_out_avail, bytes_xfer_avail, files_in_avail, files_out_avail, files_xfer_avail FROM ftpquotalimits WHERE name = '%{0}' AND quota_type = '%{1}'"

SQLNamedQuery get-quota-tally SELECT "name, quota_type, bytes_in_used, bytes_out_used, bytes_xfer_used, files_in_used, files_out_used, files_xfer_used FROM ftpquotatallies WHERE name = '%{0}' AND quota_type = '%{1}'"

SQLNamedQuery update-quota-tally UPDATE "bytes_in_used = bytes_in_used + %{0}, bytes_out_used = bytes_out_used + %{1}, bytes_xfer_used = bytes_xfer_used + %{2}, files_in_used = files_in_used + %{3}, files_out_used = files_out_used + %{4}, files_xfer_used = files_xfer_used + %{5} WHERE name = '%{6}' AND quota_type = '%{7}'" ftpquotatallies

SQLNamedQuery insert-quota-tally INSERT "%{0}, %{1}, %{2}, %{3}, %{4}, %{5}, %{6}, %{7}" ftpquotatallies

QuotaLimitTable sql:/get-quota-limit
QuotaTallyTable sql:/get-quota-tally/update-quota-tally/insert-quota-tally

RootLogin off
RequireValidShell off

TransferRate RETR 3840.0
TransferRate STOR 6400.0

#
# This file is used to manage DSO modules and features.
#

# This is the directory where DSO modules reside

ModulePath /usr/lib/proftpd

# Allow only user root to load and unload modules, but allow everyone
# to see which modules have been loaded

ModuleControlsACLs insmod,rmmod allow user root
ModuleControlsACLs lsmod allow user *

LoadModule mod_ctrls_admin.c
LoadModule mod_tls.c

# Install one of proftpd-mod-mysql, proftpd-mod-pgsql or any other
# SQL backend engine to use this module and the required backend.
# This module must be mandatory loaded before anyone of
# the existent SQL backeds.
LoadModule mod_sql.c

# Install proftpd-mod-ldap to use this
#LoadModule mod_ldap.c

#
# 'SQLBackend mysql' or 'SQLBackend postgres' (or any other valid backend) directives 
# are required to have SQL authorization working. You can also comment out the
# unused module here, in alternative.
#

# Install proftpd-mod-mysql and decomment the previous
# mod_sql.c module to use this.
LoadModule mod_sql_mysql.c

# Install proftpd-mod-pgsql and decomment the previous 
# mod_sql.c module to use this.
#LoadModule mod_sql_postgres.c

# Install proftpd-mod-sqlite and decomment the previous
# mod_sql.c module to use this
#LoadModule mod_sql_sqlite.c

# Install proftpd-mod-odbc and decomment the previous
# mod_sql.c module to use this
#LoadModule mod_sql_odbc.c

# Install one of the previous SQL backends and decomment 
# the previous mod_sql.c module to use this
#LoadModule mod_sql_passwd.c

LoadModule mod_radius.c
LoadModule mod_quotatab.c
LoadModule mod_quotatab_file.c

# Install proftpd-mod-ldap to use this
#LoadModule mod_quotatab_ldap.c

# Install one of the previous SQL backends and decomment 
# the previous mod_sql.c module to use this
LoadModule mod_quotatab_sql.c
LoadModule mod_quotatab_radius.c
LoadModule mod_wrap.c
LoadModule mod_rewrite.c
LoadModule mod_load.c
LoadModule mod_ban.c
LoadModule mod_wrap2.c
LoadModule mod_wrap2_file.c
# Install one of the previous SQL backends and decomment 
# the previous mod_sql.c module to use this
#LoadModule mod_wrap2_sql.c
LoadModule mod_dynmasq.c
#LoadModule mod_vroot.c
#LoadModule mod_exec.c
#LoadModule mod_shaper.c
LoadModule mod_ratio.c
LoadModule mod_site_misc.c

#LoadModule mod_sftp.c
#LoadModule mod_sftp_pam.c
# Install one of the previous SQL backends and decomment 
# the previous mod_sql.c module to use this
#LoadModule mod_sftp_sql.c

LoadModule mod_facl.c
#LoadModule mod_unique_id.c

# keep this module the last one
LoadModule mod_ifsession.c

CREATE TABLE IF NOT EXISTS `ftpgroup` (
  `groupname` varchar(50) COLLATE utf8_polish_ci NOT NULL,
  `gid` int(11) NOT NULL,
  `members` varchar(50) COLLATE utf8_polish_ci NOT NULL
) ENGINE=MyISAM DEFAULT CHARSET=utf8 COLLATE=utf8_polish_ci;

INSERT INTO `ftpgroup` (`groupname`, `gid`, `members`) VALUES
('ftpgroup', 2001, 'ftpuser');



CREATE TABLE IF NOT EXISTS `ftpquotalimits` (
  `name` varchar(50) COLLATE utf8_polish_ci NOT NULL,
  `quota_type` varchar(50) COLLATE utf8_polish_ci NOT NULL DEFAULT 'user',
  `per_session` varchar(50) COLLATE utf8_polish_ci NOT NULL DEFAULT 'false',
  `limit_type` varchar(50) COLLATE utf8_polish_ci NOT NULL DEFAULT 'hard',
  `bytes_in_avail` varchar(50) COLLATE utf8_polish_ci NOT NULL DEFAULT '0',
  `bytes_out_avail` varchar(50) COLLATE utf8_polish_ci NOT NULL DEFAULT '0',
  `bytes_xfer_avail` varchar(50) COLLATE utf8_polish_ci NOT NULL DEFAULT '0',
  `files_in_avail` varchar(50) COLLATE utf8_polish_ci NOT NULL DEFAULT '0',
  `files_out_avail` varchar(50) COLLATE utf8_polish_ci NOT NULL DEFAULT '0',
  `files_xfer_avail` varchar(50) COLLATE utf8_polish_ci NOT NULL DEFAULT '0',
  UNIQUE KEY `name` (`name`)
) ENGINE=MyISAM DEFAULT CHARSET=utf8 COLLATE=utf8_polish_ci;



CREATE TABLE IF NOT EXISTS `ftpquotatallies` (
  `name` varchar(50) NOT NULL,
  `quota_type` varchar(50) NOT NULL DEFAULT 'user',
  `bytes_in_used` varchar(50) NOT NULL DEFAULT '0',
  `bytes_out_used` varchar(50) NOT NULL DEFAULT '0',
  `bytes_xfer_used` varchar(50) NOT NULL DEFAULT '0',
  `files_in_used` varchar(50) NOT NULL DEFAULT '0',
  `files_out_used` varchar(50) NOT NULL DEFAULT '0',
  `files_xfer_used` varchar(50) NOT NULL DEFAULT '0',
  UNIQUE KEY `name` (`name`)
) ENGINE=MyISAM DEFAULT CHARSET=latin1;



CREATE TABLE IF NOT EXISTS `ftpuser` (
  `userid` varchar(50) COLLATE utf8_polish_ci NOT NULL,
  `passwd` varchar(50) COLLATE utf8_polish_ci NOT NULL,
  `uid` int(11) NOT NULL DEFAULT '2004',
  `gid` int(11) NOT NULL DEFAULT '2004',
  `homedir` varchar(50) COLLATE utf8_polish_ci NOT NULL,
  `shell` varchar(50) COLLATE utf8_polish_ci NOT NULL DEFAULT '/usr/sbin/nologin',
  `count` int(11) NOT NULL DEFAULT '0',
  `accessed` datetime NOT NULL DEFAULT '0000-00-00 00:00:00',
  `modified` datetime NOT NULL DEFAULT '0000-00-00 00:00:00',
  `status` int(11) NOT NULL DEFAULT '1',
  UNIQUE KEY `userid` (`userid`)
) ENGINE=MyISAM DEFAULT CHARSET=utf8 COLLATE=utf8_polish_ci;