Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!

Ogłoszenie

Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.

#1  2012-02-26 08:12:18

  pribina - Użytkownik

pribina
Użytkownik
Zarejestrowany: 2011-06-11

[SOLVED] System cały czas wchodzi do uśpienia przy pracy na baterii

Mam dosyć nietypowy problem z trybem uśpienia przy pracy na baterii. Zaraz po załadowaniu systemu ten wchodzi w tryb uśpienia. W momencie jak go wybudzę po kilku sekundach ponownie do niego wchodzi i tak w kółko. Mój laptop to Aspire 5732ZG. System: Debian testing z KDE.

Oto plik messages:

Kod:

Feb 26 00:53:08 tesla kernel: [    3.257495] usb usb4: Manufacturer: Linux 3.1.0-1-amd64 uhci_hcd
Feb 26 00:53:08 tesla kernel: [    3.257497] usb usb4: SerialNumber: 0000:00:1d.0
Feb 26 00:53:08 tesla kernel: [    3.257600] hub 4-0:1.0: USB hub found
Feb 26 00:53:08 tesla kernel: [    3.257605] hub 4-0:1.0: 2 ports detected
Feb 26 00:53:08 tesla kernel: [    3.257694] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
Feb 26 00:53:08 tesla kernel: [    3.257708] uhci_hcd 0000:00:1d.1: UHCI Host Controller
Feb 26 00:53:08 tesla kernel: [    3.257717] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
Feb 26 00:53:08 tesla kernel: [    3.257765] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00006080
Feb 26 00:53:08 tesla kernel: [    3.257810] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
Feb 26 00:53:08 tesla kernel: [    3.257812] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Feb 26 00:53:08 tesla kernel: [    3.257814] usb usb5: Product: UHCI Host Controller
Feb 26 00:53:08 tesla kernel: [    3.257816] usb usb5: Manufacturer: Linux 3.1.0-1-amd64 uhci_hcd
Feb 26 00:53:08 tesla kernel: [    3.257818] usb usb5: SerialNumber: 0000:00:1d.1
Feb 26 00:53:08 tesla kernel: [    3.257943] hub 5-0:1.0: USB hub found
Feb 26 00:53:08 tesla kernel: [    3.257948] hub 5-0:1.0: 2 ports detected
Feb 26 00:53:08 tesla kernel: [    3.258026] uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 20 (level, low) -> IRQ 20
Feb 26 00:53:08 tesla kernel: [    3.258038] uhci_hcd 0000:00:1d.2: UHCI Host Controller
Feb 26 00:53:08 tesla kernel: [    3.258046] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
Feb 26 00:53:08 tesla kernel: [    3.258081] uhci_hcd 0000:00:1d.2: irq 20, io base 0x00006060
Feb 26 00:53:08 tesla kernel: [    3.258120] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
Feb 26 00:53:08 tesla kernel: [    3.258123] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Feb 26 00:53:08 tesla kernel: [    3.258125] usb usb6: Product: UHCI Host Controller
Feb 26 00:53:08 tesla kernel: [    3.258127] usb usb6: Manufacturer: Linux 3.1.0-1-amd64 uhci_hcd
Feb 26 00:53:08 tesla kernel: [    3.258129] usb usb6: SerialNumber: 0000:00:1d.2
Feb 26 00:53:08 tesla kernel: [    3.258231] hub 6-0:1.0: USB hub found
Feb 26 00:53:08 tesla kernel: [    3.258236] hub 6-0:1.0: 2 ports detected
Feb 26 00:53:08 tesla kernel: [    3.258320] uhci_hcd 0000:00:1d.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Feb 26 00:53:08 tesla kernel: [    3.258332] uhci_hcd 0000:00:1d.3: UHCI Host Controller
Feb 26 00:53:08 tesla kernel: [    3.258342] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 7
Feb 26 00:53:08 tesla kernel: [    3.258387] uhci_hcd 0000:00:1d.3: irq 18, io base 0x00006040
Feb 26 00:53:08 tesla kernel: [    3.258428] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
Feb 26 00:53:08 tesla kernel: [    3.258430] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Feb 26 00:53:08 tesla kernel: [    3.258433] usb usb7: Product: UHCI Host Controller
Feb 26 00:53:08 tesla kernel: [    3.258434] usb usb7: Manufacturer: Linux 3.1.0-1-amd64 uhci_hcd
Feb 26 00:53:08 tesla kernel: [    3.258436] usb usb7: SerialNumber: 0000:00:1d.3
Feb 26 00:53:08 tesla kernel: [    3.258536] hub 7-0:1.0: USB hub found
Feb 26 00:53:08 tesla kernel: [    3.258542] hub 7-0:1.0: 2 ports detected
Feb 26 00:53:08 tesla kernel: [    3.266630] SCSI subsystem initialized
Feb 26 00:53:08 tesla kernel: [    3.275417] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
Feb 26 00:53:08 tesla kernel: [    3.275531] ahci: SSS flag set, parallel bus scan disabled
Feb 26 00:53:08 tesla kernel: [    3.275565] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
Feb 26 00:53:08 tesla kernel: [    3.275569] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pmp pio slum part ccc ems sxs 
Feb 26 00:53:08 tesla kernel: [    3.285974] scsi0 : ahci
Feb 26 00:53:08 tesla kernel: [    3.286116] scsi1 : ahci
Feb 26 00:53:08 tesla kernel: [    3.286183] scsi2 : ahci
Feb 26 00:53:08 tesla kernel: [    3.286251] scsi3 : ahci
Feb 26 00:53:08 tesla kernel: [    3.286392] ata1: SATA max UDMA/133 abar m2048@0xd6304000 port 0xd6304100 irq 44
Feb 26 00:53:08 tesla kernel: [    3.286396] ata2: SATA max UDMA/133 abar m2048@0xd6304000 port 0xd6304180 irq 44
Feb 26 00:53:08 tesla kernel: [    3.286398] ata3: DUMMY
Feb 26 00:53:08 tesla kernel: [    3.286400] ata4: DUMMY
Feb 26 00:53:08 tesla kernel: [    3.304594] atl1c 0000:05:00.0: version 1.0.1.0-NAPI
Feb 26 00:53:08 tesla kernel: [    3.652018] usb 2-4: new high speed USB device number 2 using ehci_hcd
Feb 26 00:53:08 tesla kernel: [    3.776025] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Feb 26 00:53:08 tesla kernel: [    3.816151] ata1.00: ATA-8: TOSHIBA MK3265GSX, GJ002J, max UDMA/100
Feb 26 00:53:08 tesla kernel: [    3.816154] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
Feb 26 00:53:08 tesla kernel: [    3.816857] ata1.00: configured for UDMA/100
Feb 26 00:53:08 tesla kernel: [    3.817004] scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MK3265GS GJ00 PQ: 0 ANSI: 5
Feb 26 00:53:08 tesla kernel: [    3.823650] usb 2-4: New USB device found, idVendor=064e, idProduct=a103
Feb 26 00:53:08 tesla kernel: [    3.823653] usb 2-4: New USB device strings: Mfr=2, Product=1, SerialNumber=3
Feb 26 00:53:08 tesla kernel: [    3.823655] usb 2-4: Product: Video WebCam
Feb 26 00:53:08 tesla kernel: [    3.823657] usb 2-4: Manufacturer: SuYin
Feb 26 00:53:08 tesla kernel: [    3.823659] usb 2-4: SerialNumber: CN0314-SN30-OV035-VA-R05.00.00
Feb 26 00:53:08 tesla kernel: [    3.984021] Refined TSC clocksource calibration: 2294.249 MHz.
Feb 26 00:53:08 tesla kernel: [    3.984027] Switching to clocksource tsc
Feb 26 00:53:08 tesla kernel: [    4.064011] usb 3-1: new full speed USB device number 2 using uhci_hcd
Feb 26 00:53:08 tesla kernel: [    4.246191] usb 3-1: New USB device found, idVendor=046d, idProduct=c52f
Feb 26 00:53:08 tesla kernel: [    4.246193] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Feb 26 00:53:08 tesla kernel: [    4.246196] usb 3-1: Product: USB Receiver
Feb 26 00:53:08 tesla kernel: [    4.246197] usb 3-1: Manufacturer: Logitech
Feb 26 00:53:08 tesla kernel: [    4.271410] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input1
Feb 26 00:53:08 tesla kernel: [    4.271537] generic-usb 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-1/input0
Feb 26 00:53:08 tesla kernel: [    4.276293] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.1/input/input2
Feb 26 00:53:08 tesla kernel: [    4.276486] generic-usb 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.0-1/input1
Feb 26 00:53:08 tesla kernel: [    4.276505] usbcore: registered new interface driver usbhid
Feb 26 00:53:08 tesla kernel: [    4.276507] usbhid: USB HID core driver
Feb 26 00:53:08 tesla kernel: [    4.308025] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Feb 26 00:53:08 tesla kernel: [    4.309964] ata2.00: ATAPI: HL-DT-STDVDRAM GT31N, 1.00, max UDMA/100
Feb 26 00:53:08 tesla kernel: [    4.313559] ata2.00: configured for UDMA/100
Feb 26 00:53:08 tesla kernel: [    4.318672] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GT31N     1.00 PQ: 0 ANSI: 5
Feb 26 00:53:08 tesla kernel: [    4.325187] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
Feb 26 00:53:08 tesla kernel: [    4.325241] sd 0:0:0:0: [sda] Write Protect is off
Feb 26 00:53:08 tesla kernel: [    4.325266] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Feb 26 00:53:08 tesla kernel: [    4.362349]  sda: sda1 sda2 sda3 sda4
Feb 26 00:53:08 tesla kernel: [    4.362731] sd 0:0:0:0: [sda] Attached SCSI disk
Feb 26 00:53:08 tesla kernel: [    4.367641] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Feb 26 00:53:08 tesla kernel: [    4.367646] cdrom: Uniform CD-ROM driver Revision: 3.20
Feb 26 00:53:08 tesla kernel: [    5.060875] Btrfs loaded
Feb 26 00:53:08 tesla kernel: [    5.252839] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
Feb 26 00:53:08 tesla kernel: [   16.595235] wmi: Mapper loaded
Feb 26 00:53:08 tesla kernel: [   16.602932] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0c/PNP0C0C:00/input/input3
Feb 26 00:53:08 tesla kernel: [   16.602939] ACPI: Power Button [PWRB]
Feb 26 00:53:08 tesla kernel: [   16.602990] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0c/PNP0C0D:00/input/input4
Feb 26 00:53:08 tesla kernel: [   16.603047] ACPI: Lid Switch [LID0]
Feb 26 00:53:08 tesla kernel: [   16.603098] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0c/PNP0C0E:00/input/input5
Feb 26 00:53:08 tesla kernel: [   16.603102] ACPI: Sleep Button [SLPB]
Feb 26 00:53:08 tesla kernel: [   16.614444] Marking TSC unstable due to TSC halts in idle
Feb 26 00:53:08 tesla kernel: [   16.614907] Switching to clocksource hpet
Feb 26 00:53:08 tesla kernel: [   16.615366] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
Feb 26 00:53:08 tesla kernel: [   16.615372] ACPI: Power Button [PWRF]
Feb 26 00:53:08 tesla kernel: [   16.727903] lib80211: common routines for IEEE802.11 drivers
Feb 26 00:53:08 tesla kernel: [   16.904127] acpi device:03: registered as cooling_device2
Feb 26 00:53:08 tesla kernel: [   16.904239] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input7
Feb 26 00:53:08 tesla kernel: [   16.904247] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
Feb 26 00:53:08 tesla kernel: [   17.035082] ACPI: AC Adapter [AC] (off-line)
Feb 26 00:53:08 tesla kernel: [   17.092535] input: PC Speaker as /devices/platform/pcspkr/input/input8
Feb 26 00:53:08 tesla kernel: [   17.101745] iTCO_vendor_support: vendor-support=0
Feb 26 00:53:08 tesla kernel: [   17.277617] Disabling lock debugging due to kernel taint
Feb 26 00:53:08 tesla kernel: [   17.277640] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
Feb 26 00:53:08 tesla kernel: [   17.381074] [fglrx] Maximum main memory to use for locked dma buffers: 5788 MBytes.
Feb 26 00:53:08 tesla kernel: [   17.381442] [fglrx]   vendor: 1002 device: 9553 count: 1
Feb 26 00:53:08 tesla kernel: [   17.382009] [fglrx] ioport: bar 1, base 0x5000, size: 0x100
Feb 26 00:53:08 tesla kernel: [   17.382023] pci 0000:01:00.0: power state changed by ACPI to D0
Feb 26 00:53:08 tesla kernel: [   17.382028] pci 0000:01:00.0: power state changed by ACPI to D0
Feb 26 00:53:08 tesla kernel: [   17.382037] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Feb 26 00:53:08 tesla kernel: [   17.382284] [fglrx] Kernel PAT support is enabled
Feb 26 00:53:08 tesla kernel: [   17.382308] [fglrx] module loaded - fglrx 8.93.4 [Dec  5 2011] with 1 minors
Feb 26 00:53:08 tesla kernel: [   17.750216] wl 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Feb 26 00:53:08 tesla kernel: [   18.540186] ACPI: Battery Slot [BAT0] (battery present)
Feb 26 00:53:08 tesla kernel: [   18.541336] wlan0: Broadcom BCM4357 802.11 Hybrid Wireless Controller 5.100.82.112
Feb 26 00:53:08 tesla kernel: [   18.597263] Linux media interface: v0.10
Feb 26 00:53:08 tesla kernel: [   18.622867] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
Feb 26 00:53:08 tesla kernel: [   18.622970] iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0460)
Feb 26 00:53:08 tesla kernel: [   18.623459] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
Feb 26 00:53:08 tesla kernel: [   18.633682] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Feb 26 00:53:08 tesla kernel: [   18.766249] Linux video capture interface: v2.00
Feb 26 00:53:08 tesla kernel: [   18.820713] uvcvideo: Found UVC 1.00 device Video WebCam (064e:a103)
Feb 26 00:53:08 tesla kernel: [   18.839444] input: Video WebCam as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.0/input/input9
Feb 26 00:53:08 tesla kernel: [   18.839550] usbcore: registered new interface driver uvcvideo
Feb 26 00:53:08 tesla kernel: [   18.839552] USB Video Class driver (1.1.1)
Feb 26 00:53:08 tesla kernel: [   18.910423] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
Feb 26 00:53:08 tesla kernel: [   18.972388] hda_codec: ALC272X: BIOS auto-probing.
Feb 26 00:53:08 tesla kernel: [   18.974066] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input10
Feb 26 00:53:08 tesla kernel: [   18.975961] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
Feb 26 00:53:08 tesla kernel: [   19.565408] Adding 4194300k swap on /dev/sda3.  Priority:-1 extents:1 across:4194300k 
Feb 26 00:53:08 tesla kernel: [   19.570957] EXT4-fs (sda4): warning: maximal mount count reached, running e2fsck is recommended
Feb 26 00:53:08 tesla kernel: [   19.571258] EXT4-fs (sda4): re-mounted. Opts: errors=remount-ro,user_xattr
Feb 26 00:53:08 tesla kernel: [   19.680271] loop: module loaded
Feb 26 00:53:08 tesla kernel: [   19.744486] sd 0:0:0:0: Attached scsi generic sg0 type 0
Feb 26 00:53:08 tesla kernel: [   19.744548] sr 1:0:0:0: Attached scsi generic sg1 type 5
Feb 26 00:53:08 tesla kernel: [   19.803160] Synaptics Touchpad, model: 1, fw: 7.0, id: 0x1c0b1, caps: 0xd04711/0xa00000/0x20000
Feb 26 00:53:08 tesla kernel: [   19.891798] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input12
Feb 26 00:53:08 tesla kernel: [   21.218015] fuse init (API version 7.17)
Feb 26 00:53:08 tesla kernel: [   22.245644] ADDRCONF(NETDEV_UP): eth1: link is not ready
Feb 26 00:53:08 tesla kernel: [   22.260342] lp: driver loaded but no devices found
Feb 26 00:53:08 tesla kernel: [   22.263851] ppdev: user-space parallel port driver
Feb 26 00:53:09 tesla kernel: [   22.792197] [fglrx] ATIF platform detected with notification ID: 0x81
Feb 26 00:53:09 tesla kernel: [   23.227134] [fglrx] Firegl kernel thread PID: 1881
Feb 26 00:53:09 tesla kernel: [   23.227224] [fglrx] Firegl kernel thread PID: 1882
Feb 26 00:53:09 tesla kernel: [   23.227308] [fglrx] Firegl kernel thread PID: 1883
Feb 26 00:53:09 tesla kernel: [   23.227442] [fglrx] IRQ 47 Enabled
Feb 26 00:53:09 tesla kernel: [   23.542100] [fglrx] Gart USWC size:1280 M.
Feb 26 00:53:09 tesla kernel: [   23.542103] [fglrx] Gart cacheable size:508 M.
Feb 26 00:53:09 tesla kernel: [   23.542109] [fglrx] Reserved FB block: Shared offset:0, size:1000000 
Feb 26 00:53:09 tesla kernel: [   23.542112] [fglrx] Reserved FB block: Unshared offset:fbfd000, size:403000 
Feb 26 00:53:09 tesla kernel: [   23.542114] [fglrx] Reserved FB block: Unshared offset:1fffb000, size:5000 
Feb 26 00:53:13 tesla kernel: [   27.132619] vboxdrv: fAsync=0 offMin=0x233 offMax=0x1c92
Feb 26 00:53:13 tesla kernel: [   27.132689] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
Feb 26 00:53:13 tesla kernel: [   27.347121] vboxpci: IOMMU not found (not registered)
Feb 26 00:53:14 tesla kernel: [   28.516120] ehci_hcd 0000:00:1a.7: PCI INT D disabled
Feb 26 00:53:14 tesla kernel: [   28.532728] uhci_hcd 0000:00:1d.0: PCI INT A disabled
Feb 26 00:53:15 tesla kernel: [   28.840021] ehci_hcd 0000:00:1d.7: PCI INT A disabled
Feb 26 00:53:19 tesla kernel: [   32.844086] uhci_hcd 0000:00:1a.0: PCI INT A disabled
Feb 26 00:53:28 tesla kernel: [   42.456679] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
Feb 26 00:53:35 tesla kernel: [   48.976076] uhci_hcd 0000:00:1a.0: PCI INT A disabled
Feb 26 00:53:37 tesla kernel: [   51.534902] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
Feb 26 00:53:41 tesla kernel: [   55.003665] sr 1:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
Feb 26 00:53:41 tesla kernel: [   55.003688] ata2: hard resetting link
Feb 26 00:53:42 tesla kernel: [   55.828070] uhci_hcd 0000:00:1a.0: PCI INT A disabled
Feb 26 00:53:42 tesla kernel: [   55.896046] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Feb 26 00:53:42 tesla kernel: [   55.901652] ata2.00: configured for UDMA/100
Feb 26 00:53:42 tesla kernel: [   55.916036] ata2: EH complete
Feb 26 00:53:52 tesla kernel: [   57.197939] PM: Syncing filesystems ... done.
Feb 26 00:53:52 tesla kernel: [   57.373822] Freezing user space processes ... (elapsed 0.01 seconds) done.
Feb 26 00:53:52 tesla kernel: [   57.388039] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
Feb 26 00:53:52 tesla kernel: [   57.404090] Suspending console(s) (use no_console_suspend to debug)
Feb 26 00:53:52 tesla kernel: [   57.404266] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
Feb 26 00:53:52 tesla kernel: [   57.420042] ehci_hcd 0000:00:1a.7: BAR 0: set to [mem 0xd6304c00-0xd6304fff] (PCI address [0xd6304c00-0xd6304fff])
Feb 26 00:53:52 tesla kernel: [   57.420114] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 21 (level, low) -> IRQ 21
Feb 26 00:53:52 tesla kernel: [   57.420199] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
Feb 26 00:53:52 tesla kernel: [   57.436027] ehci_hcd 0000:00:1d.7: BAR 0: set to [mem 0xd6304800-0xd6304bff] (PCI address [0xd6304800-0xd6304bff])
Feb 26 00:53:52 tesla kernel: [   57.436102] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
Feb 26 00:53:52 tesla kernel: [   57.436505] sd 0:0:0:0: [sda] Synchronizing SCSI cache
Feb 26 00:53:52 tesla kernel: [   57.436625] sd 0:0:0:0: [sda] Stopping disk
Feb 26 00:53:52 tesla kernel: [   57.530153] wl 0000:04:00.0: PCI INT A disabled
Feb 26 00:53:52 tesla kernel: [   57.530278] [fglrx] IRQ 47 Disabled
Feb 26 00:53:52 tesla kernel: [   57.530331] [fglrx] Preparing suspend fglrx in kernel.
Feb 26 00:53:52 tesla kernel: [   57.544392] ehci_hcd 0000:00:1d.7: PCI INT A disabled
Feb 26 00:53:52 tesla kernel: [   57.544469] uhci_hcd 0000:00:1d.3: PCI INT C disabled
Feb 26 00:53:52 tesla kernel: [   57.544481] uhci_hcd 0000:00:1d.2: PCI INT D disabled
Feb 26 00:53:52 tesla kernel: [   57.544907] uhci_hcd 0000:00:1d.1: PCI INT B disabled
Feb 26 00:53:52 tesla kernel: [   57.545035] uhci_hcd 0000:00:1d.0: PCI INT A disabled
Feb 26 00:53:52 tesla kernel: [   57.545435] snd_hda_intel 0000:00:1b.0: PCI INT A disabled
Feb 26 00:53:52 tesla kernel: [   57.546714] ehci_hcd 0000:00:1a.7: PCI INT D disabled
Feb 26 00:53:52 tesla kernel: [   57.546727] uhci_hcd 0000:00:1a.0: PCI INT A disabled
Feb 26 00:53:52 tesla kernel: [   60.475050] [fglrx] Suspending fglrx in kernel completed.
Feb 26 00:53:52 tesla kernel: [   60.475054] [fglrx] Power down the ASIC .
Feb 26 00:53:52 tesla kernel: [   60.475191] PM: suspend of devices complete after 3038.868 msecs
Feb 26 00:53:52 tesla kernel: [   60.475471] pcieport 0000:00:1c.2: wake-up capability enabled by ACPI
Feb 26 00:53:52 tesla kernel: [   60.520177] PM: late suspend of devices complete after 44.979 msecs
Feb 26 00:53:52 tesla kernel: [   60.520354] ACPI: Preparing to enter system sleep state S3
Feb 26 00:53:52 tesla kernel: [   60.520507] PM: Saving platform NVS memory
Feb 26 00:53:52 tesla kernel: [   60.521049] Disabling non-boot CPUs ...
Feb 26 00:53:52 tesla kernel: [   60.624068] CPU 1 is now offline
Feb 26 00:53:52 tesla kernel: [   60.624617] ACPI: Low-level resume complete
Feb 26 00:53:52 tesla kernel: [   60.624617] PM: Restoring platform NVS memory
Feb 26 00:53:52 tesla kernel: [   60.624617] Enabling non-boot CPUs ...
Feb 26 00:53:52 tesla kernel: [   60.624617] Booting Node 0 Processor 1 APIC 0x1
Feb 26 00:53:52 tesla kernel: [   60.522587] Calibrating delay loop (skipped) already calibrated this CPU
Feb 26 00:53:52 tesla kernel: [   60.644569] Switched to NOHz mode on CPU #1
Feb 26 00:53:52 tesla kernel: [   60.654242] CPU1 is up
Feb 26 00:53:52 tesla kernel: [   60.655362] ACPI: Waking up from system sleep state S3
Feb 26 00:53:52 tesla kernel: [   60.659459] PM: early resume of devices complete after 1.345 msecs
Feb 26 00:53:52 tesla kernel: [   60.659566] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
Feb 26 00:53:52 tesla kernel: [   60.659603] usb usb3: root hub lost power or was reset
Feb 26 00:53:52 tesla kernel: [   60.659620] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 21 (level, low) -> IRQ 21
Feb 26 00:53:52 tesla kernel: [   60.659668] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
Feb 26 00:53:52 tesla kernel: [   60.659733] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
Feb 26 00:53:52 tesla kernel: [   60.659794] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
Feb 26 00:53:52 tesla kernel: [   60.659810] usb usb4: root hub lost power or was reset
Feb 26 00:53:52 tesla kernel: [   60.659846] usb usb5: root hub lost power or was reset
Feb 26 00:53:52 tesla kernel: [   60.659862] uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 20 (level, low) -> IRQ 20
Feb 26 00:53:52 tesla kernel: [   60.659911] usb usb6: root hub lost power or was reset
Feb 26 00:53:52 tesla kernel: [   60.659911] uhci_hcd 0000:00:1d.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Feb 26 00:53:52 tesla kernel: [   60.659928] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
Feb 26 00:53:52 tesla kernel: [   60.659948] usb usb7: root hub lost power or was reset
Feb 26 00:53:52 tesla kernel: [   60.660044] wl 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Feb 26 00:53:52 tesla kernel: [   60.660084] fglrx_pci 0000:01:00.0: power state changed by ACPI to D0
Feb 26 00:53:52 tesla kernel: [   60.660088] fglrx_pci 0000:01:00.0: power state changed by ACPI to D0
Feb 26 00:53:52 tesla kernel: [   60.662590] [fglrx] Power up the ASIC
Feb 26 00:53:52 tesla kernel: [   60.662606] [fglrx] Preparing resume fglrx in kernel.
Feb 26 00:53:52 tesla kernel: [   60.703339] pcieport 0000:00:1c.2: wake-up capability disabled by ACPI
Feb 26 00:53:52 tesla kernel: [   60.709582] sd 0:0:0:0: [sda] Starting disk
Feb 26 00:53:52 tesla kernel: [   60.948045] usb 2-4: reset high speed USB device number 2 using ehci_hcd
Feb 26 00:53:52 tesla kernel: [   60.969254] [fglrx] Resuming fglrx in kernel completed.
Feb 26 00:53:52 tesla kernel: [   60.969369] [fglrx] IRQ 47 Enabled
Feb 26 00:53:52 tesla kernel: [   61.192079] usb 3-1: reset full speed USB device number 2 using uhci_hcd
Feb 26 00:53:52 tesla kernel: [   61.312058] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Feb 26 00:53:52 tesla kernel: [   61.315343] ata2.00: configured for UDMA/100
Feb 26 00:53:52 tesla kernel: [   62.480056] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Feb 26 00:53:52 tesla kernel: [   62.481553] ata1.00: configured for UDMA/100
Feb 26 00:53:52 tesla kernel: [   62.526290] PM: resume of devices complete after 1866.758 msecs
Feb 26 00:53:52 tesla kernel: [   62.526469] Restarting tasks ... done.
Feb 26 00:53:52 tesla kernel: [   62.532901] video LNXVIDEO:00: Restoring backlight state
Feb 26 00:53:54 tesla kernel: [   63.782410] ADDRCONF(NETDEV_UP): eth1: link is not ready
Feb 26 00:53:55 tesla kernel: [   64.820230] uhci_hcd 0000:00:1d.0: PCI INT A disabled
Feb 26 00:53:55 tesla kernel: [   64.836050] ehci_hcd 0000:00:1a.7: PCI INT D disabled
Feb 26 00:53:56 tesla kernel: [   65.856055] ehci_hcd 0000:00:1d.7: PCI INT A disabled
Feb 26 00:54:03 tesla kernel: [   72.856076] uhci_hcd 0000:00:1a.0: PCI INT A disabled
Feb 26 00:54:06 tesla kernel: [   76.049709] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
Feb 26 00:54:15 tesla kernel: [   85.003447] sr 1:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
Feb 26 00:54:15 tesla kernel: [   85.003470] ata2: hard resetting link
Feb 26 00:54:16 tesla kernel: [   85.900036] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Feb 26 00:54:16 tesla kernel: [   85.905604] ata2.00: configured for UDMA/100
Feb 26 00:54:16 tesla kernel: [   85.920062] ata2: EH complete
Feb 26 00:54:19 tesla kernel: [   89.008066] uhci_hcd 0000:00:1a.0: PCI INT A disabled
Feb 26 00:54:28 tesla kernel: [   89.537172] PM: Syncing filesystems ... done.
Feb 26 00:54:28 tesla kernel: [   91.615098] Freezing user space processes ... (elapsed 0.02 seconds) done.
Feb 26 00:54:28 tesla kernel: [   91.644030] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
Feb 26 00:54:28 tesla kernel: [   91.660092] Suspending console(s) (use no_console_suspend to debug)
Feb 26 00:54:28 tesla kernel: [   91.660266] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
Feb 26 00:54:28 tesla kernel: [   91.676038] ehci_hcd 0000:00:1a.7: BAR 0: set to [mem 0xd6304c00-0xd6304fff] (PCI address [0xd6304c00-0xd6304fff])
Feb 26 00:54:28 tesla kernel: [   91.676110] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 21 (level, low) -> IRQ 21
Feb 26 00:54:28 tesla kernel: [   91.676195] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
Feb 26 00:54:28 tesla kernel: [   91.692035] ehci_hcd 0000:00:1d.7: BAR 0: set to [mem 0xd6304800-0xd6304bff] (PCI address [0xd6304800-0xd6304bff])
Feb 26 00:54:28 tesla kernel: [   91.692109] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
Feb 26 00:54:28 tesla kernel: [   91.692505] sd 0:0:0:0: [sda] Synchronizing SCSI cache
Feb 26 00:54:28 tesla kernel: [   91.697892] sd 0:0:0:0: [sda] Stopping disk
Feb 26 00:54:28 tesla kernel: [   91.785935] wl 0000:04:00.0: PCI INT A disabled
Feb 26 00:54:28 tesla kernel: [   91.786048] [fglrx] IRQ 47 Disabled
Feb 26 00:54:28 tesla kernel: [   91.786112] [fglrx] Preparing suspend fglrx in kernel.
Feb 26 00:54:28 tesla kernel: [   91.792077] ehci_hcd 0000:00:1d.7: PCI INT A disabled
Feb 26 00:54:28 tesla kernel: [   91.792175] uhci_hcd 0000:00:1d.3: PCI INT C disabled
Feb 26 00:54:28 tesla kernel: [   91.792259] uhci_hcd 0000:00:1d.2: PCI INT D disabled
Feb 26 00:54:28 tesla kernel: [   91.792322] uhci_hcd 0000:00:1d.1: PCI INT B disabled
Feb 26 00:54:28 tesla kernel: [   91.792420] uhci_hcd 0000:00:1d.0: PCI INT A disabled
Feb 26 00:54:28 tesla kernel: [   91.792470] ehci_hcd 0000:00:1a.7: PCI INT D disabled
Feb 26 00:54:28 tesla kernel: [   91.796079] uhci_hcd 0000:00:1a.0: PCI INT A disabled
Feb 26 00:54:28 tesla kernel: [   92.100692] snd_hda_intel 0000:00:1b.0: PCI INT A disabled
Feb 26 00:54:28 tesla kernel: [   94.742478] [fglrx] Suspending fglrx in kernel completed.
Feb 26 00:54:28 tesla kernel: [   94.742482] [fglrx] Power down the ASIC .
Feb 26 00:54:28 tesla kernel: [   94.742605] PM: suspend of devices complete after 3050.278 msecs
Feb 26 00:54:28 tesla kernel: [   94.742860] pcieport 0000:00:1c.2: wake-up capability enabled by ACPI
Feb 26 00:54:28 tesla kernel: [   94.788200] PM: late suspend of devices complete after 45.589 msecs
Feb 26 00:54:28 tesla kernel: [   94.788399] ACPI: Preparing to enter system sleep state S3
Feb 26 00:54:28 tesla kernel: [   94.788545] PM: Saving platform NVS memory
Feb 26 00:54:28 tesla kernel: [   94.789081] Disabling non-boot CPUs ...
Feb 26 00:54:28 tesla kernel: [   94.892034] CPU 1 is now offline
Feb 26 00:54:28 tesla kernel: [   94.892587] ACPI: Low-level resume complete
Feb 26 00:54:28 tesla kernel: [   94.892587] PM: Restoring platform NVS memory
Feb 26 00:54:28 tesla kernel: [   94.892587] Enabling non-boot CPUs ...
Feb 26 00:54:28 tesla kernel: [   94.892587] Booting Node 0 Processor 1 APIC 0x1
Feb 26 00:54:28 tesla kernel: [   94.790649] Calibrating delay loop (skipped) already calibrated this CPU
Feb 26 00:54:28 tesla kernel: [   94.912552] Switched to NOHz mode on CPU #1
Feb 26 00:54:28 tesla kernel: [   94.919605] CPU1 is up
Feb 26 00:54:28 tesla kernel: [   94.920747] ACPI: Waking up from system sleep state S3
Feb 26 00:54:28 tesla kernel: [   94.924805] PM: early resume of devices complete after 1.361 msecs
Feb 26 00:54:28 tesla kernel: [   94.924911] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
Feb 26 00:54:28 tesla kernel: [   94.924947] usb usb3: root hub lost power or was reset
Feb 26 00:54:28 tesla kernel: [   94.924963] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 21 (level, low) -> IRQ 21
Feb 26 00:54:28 tesla kernel: [   94.925009] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
Feb 26 00:54:28 tesla kernel: [   94.925085] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
Feb 26 00:54:28 tesla kernel: [   94.925115] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
Feb 26 00:54:28 tesla kernel: [   94.925124] usb usb4: root hub lost power or was reset
Feb 26 00:54:28 tesla kernel: [   94.925167] usb usb5: root hub lost power or was reset
Feb 26 00:54:28 tesla kernel: [   94.925185] uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 20 (level, low) -> IRQ 20
Feb 26 00:54:28 tesla kernel: [   94.925238] usb usb6: root hub lost power or was reset
Feb 26 00:54:28 tesla kernel: [   94.925258] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
Feb 26 00:54:28 tesla kernel: [   94.925263] uhci_hcd 0000:00:1d.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Feb 26 00:54:28 tesla kernel: [   94.925299] usb usb7: root hub lost power or was reset
Feb 26 00:54:28 tesla kernel: [   94.925369] wl 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Feb 26 00:54:28 tesla kernel: [   94.925402] fglrx_pci 0000:01:00.0: power state changed by ACPI to D0
Feb 26 00:54:28 tesla kernel: [   94.925407] fglrx_pci 0000:01:00.0: power state changed by ACPI to D0
Feb 26 00:54:28 tesla kernel: [   94.927907] [fglrx] Power up the ASIC
Feb 26 00:54:28 tesla kernel: [   94.927923] [fglrx] Preparing resume fglrx in kernel.
Feb 26 00:54:28 tesla kernel: [   94.933656] pcieport 0000:00:1c.2: wake-up capability disabled by ACPI
Feb 26 00:54:28 tesla kernel: [   94.933807] sd 0:0:0:0: [sda] Starting disk
Feb 26 00:54:28 tesla kernel: [   95.176043] usb 2-4: reset high speed USB device number 2 using ehci_hcd
Feb 26 00:54:28 tesla kernel: [   95.184852] [fglrx] Resuming fglrx in kernel completed.
Feb 26 00:54:28 tesla kernel: [   95.184966] [fglrx] IRQ 47 Enabled
Feb 26 00:54:28 tesla kernel: [   95.420073] usb 3-1: reset full speed USB device number 2 using uhci_hcd
Feb 26 00:54:28 tesla kernel: [   95.484083] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Feb 26 00:54:28 tesla kernel: [   95.488176] ata2.00: configured for UDMA/100
Feb 26 00:54:28 tesla kernel: [   96.708077] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Feb 26 00:54:28 tesla kernel: [   96.709574] ata1.00: configured for UDMA/100
Feb 26 00:54:28 tesla kernel: [   96.752314] PM: resume of devices complete after 1827.437 msecs
Feb 26 00:54:28 tesla kernel: [   96.752492] Restarting tasks ... done.
Feb 26 00:54:28 tesla kernel: [   96.764439] video LNXVIDEO:00: Restoring backlight state
Feb 26 00:54:30 tesla kernel: [   98.804127] uhci_hcd 0000:00:1d.0: PCI INT A disabled
Feb 26 00:54:30 tesla kernel: [   98.824023] ehci_hcd 0000:00:1a.7: PCI INT D disabled
Feb 26 00:54:31 tesla kernel: [   99.856037] ehci_hcd 0000:00:1d.7: PCI INT A disabled
Feb 26 00:54:33 tesla kernel: [  101.317561] ADDRCONF(NETDEV_UP): eth1: link is not ready
Feb 26 00:54:36 tesla spideroak_inotify[6563]: Program started
Feb 26 00:54:36 tesla spideroak_inotify[6563]: inotify_add_watch ignoring missing directory 
Feb 26 00:54:36 tesla spideroak_inotify[6563]: Can't watch toplevel path 
Feb 26 00:54:45 tesla kernel: [  113.036077] uhci_hcd 0000:00:1a.0: PCI INT A disabled
Feb 26 00:54:55 tesla kernel: [  123.297804] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
Feb 26 00:55:07 tesla kernel: [  127.637723] PM: Syncing filesystems ... done.
Feb 26 00:55:07 tesla kernel: [  127.643210] Freezing user space processes ... (elapsed 0.01 seconds) done.
Feb 26 00:55:07 tesla kernel: [  127.656082] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
Feb 26 00:55:07 tesla kernel: [  127.672066] Suspending console(s) (use no_console_suspend to debug)
Feb 26 00:55:07 tesla kernel: [  127.688030] ehci_hcd 0000:00:1a.7: BAR 0: set to [mem 0xd6304c00-0xd6304fff] (PCI address [0xd6304c00-0xd6304fff])
Feb 26 00:55:07 tesla kernel: [  127.688108] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 21 (level, low) -> IRQ 21
Feb 26 00:55:07 tesla kernel: [  127.688208] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
Feb 26 00:55:07 tesla kernel: [  127.704027] ehci_hcd 0000:00:1d.7: BAR 0: set to [mem 0xd6304800-0xd6304bff] (PCI address [0xd6304800-0xd6304bff])
Feb 26 00:55:07 tesla kernel: [  127.704100] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
Feb 26 00:55:07 tesla kernel: [  127.704482] sd 0:0:0:0: [sda] Synchronizing SCSI cache
Feb 26 00:55:07 tesla kernel: [  127.704596] sd 0:0:0:0: [sda] Stopping disk
Feb 26 00:55:07 tesla kernel: [  127.794833] wl 0000:04:00.0: PCI INT A disabled
Feb 26 00:55:07 tesla kernel: [  127.794983] ehci_hcd 0000:00:1d.7: PCI INT A disabled
Feb 26 00:55:07 tesla kernel: [  127.794993] uhci_hcd 0000:00:1d.3: PCI INT C disabled
Feb 26 00:55:07 tesla kernel: [  127.794994] [fglrx] IRQ 47 Disabled
Feb 26 00:55:07 tesla kernel: [  127.795002] uhci_hcd 0000:00:1d.2: PCI INT D disabled
Feb 26 00:55:07 tesla kernel: [  127.795011] uhci_hcd 0000:00:1d.1: PCI INT B disabled
Feb 26 00:55:07 tesla kernel: [  127.795021] uhci_hcd 0000:00:1d.0: PCI INT A disabled
Feb 26 00:55:07 tesla kernel: [  127.795078] snd_hda_intel 0000:00:1b.0: PCI INT A disabled
Feb 26 00:55:07 tesla kernel: [  127.795090] [fglrx] Preparing suspend fglrx in kernel.
Feb 26 00:55:07 tesla kernel: [  127.795149] ehci_hcd 0000:00:1a.7: PCI INT D disabled
Feb 26 00:55:07 tesla kernel: [  127.795158] uhci_hcd 0000:00:1a.0: PCI INT A disabled
Feb 26 00:55:07 tesla kernel: [  130.739682] [fglrx] Suspending fglrx in kernel completed.
Feb 26 00:55:07 tesla kernel: [  130.739686] [fglrx] Power down the ASIC .
Feb 26 00:55:07 tesla kernel: [  130.739826] PM: suspend of devices complete after 3035.509 msecs
Feb 26 00:55:07 tesla kernel: [  130.740115] pcieport 0000:00:1c.2: wake-up capability enabled by ACPI
Feb 26 00:55:07 tesla kernel: [  130.788189] PM: late suspend of devices complete after 48.357 msecs
Feb 26 00:55:07 tesla kernel: [  130.788365] ACPI: Preparing to enter system sleep state S3
Feb 26 00:55:07 tesla kernel: [  130.788511] PM: Saving platform NVS memory
Feb 26 00:55:07 tesla kernel: [  130.789041] Disabling non-boot CPUs ...
Feb 26 00:55:07 tesla kernel: [  130.892090] CPU 1 is now offline
Feb 26 00:55:07 tesla kernel: [  130.892689] ACPI: Low-level resume complete
Feb 26 00:55:07 tesla kernel: [  130.892689] PM: Restoring platform NVS memory
Feb 26 00:55:07 tesla kernel: [  130.892689] Enabling non-boot CPUs ...
Feb 26 00:55:07 tesla kernel: [  130.892689] Booting Node 0 Processor 1 APIC 0x1
Feb 26 00:55:07 tesla kernel: [  130.790576] Calibrating delay loop (skipped) already calibrated this CPU
Feb 26 00:55:07 tesla kernel: [  130.912562] Switched to NOHz mode on CPU #1
Feb 26 00:55:07 tesla kernel: [  130.920760] CPU1 is up
Feb 26 00:55:07 tesla kernel: [  130.921884] ACPI: Waking up from system sleep state S3
Feb 26 00:55:07 tesla kernel: [  130.925900] PM: early resume of devices complete after 1.347 msecs
Feb 26 00:55:07 tesla kernel: [  130.926006] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
Feb 26 00:55:07 tesla kernel: [  130.926042] usb usb3: root hub lost power or was reset
Feb 26 00:55:07 tesla kernel: [  130.926059] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 21 (level, low) -> IRQ 21
Feb 26 00:55:07 tesla kernel: [  130.926160] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
Feb 26 00:55:07 tesla kernel: [  130.926200] usb usb4: root hub lost power or was reset
Feb 26 00:55:07 tesla kernel: [  130.926224] wl 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Feb 26 00:55:07 tesla kernel: [  130.928038] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
Feb 26 00:55:07 tesla kernel: [  130.928070] usb usb5: root hub lost power or was reset
Feb 26 00:55:07 tesla kernel: [  130.928099] uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 20 (level, low) -> IRQ 20
Feb 26 00:55:07 tesla kernel: [  130.928128] usb usb6: root hub lost power or was reset
Feb 26 00:55:07 tesla kernel: [  130.928152] uhci_hcd 0000:00:1d.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Feb 26 00:55:07 tesla kernel: [  130.928182] usb usb7: root hub lost power or was reset
Feb 26 00:55:07 tesla kernel: [  130.928217] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
Feb 26 00:55:07 tesla kernel: [  130.928332] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
Feb 26 00:55:07 tesla kernel: [  130.928425] fglrx_pci 0000:01:00.0: power state changed by ACPI to D0
Feb 26 00:55:07 tesla kernel: [  130.928430] pcieport 0000:00:1c.2: wake-up capability disabled by ACPI
Feb 26 00:55:07 tesla kernel: [  130.928580] sd 0:0:0:0: [sda] Starting disk
Feb 26 00:55:07 tesla kernel: [  130.928618] fglrx_pci 0000:01:00.0: power state changed by ACPI to D0
Feb 26 00:55:07 tesla kernel: [  130.931103] [fglrx] Power up the ASIC
Feb 26 00:55:07 tesla kernel: [  130.931119] [fglrx] Preparing resume fglrx in kernel.
Feb 26 00:55:07 tesla kernel: [  131.200043] usb 2-4: reset high speed USB device number 2 using ehci_hcd
Feb 26 00:55:07 tesla kernel: [  131.237116] [fglrx] Resuming fglrx in kernel completed.
Feb 26 00:55:07 tesla kernel: [  131.237233] [fglrx] IRQ 47 Enabled
Feb 26 00:55:07 tesla kernel: [  131.444079] usb 3-1: reset full speed USB device number 2 using uhci_hcd
Feb 26 00:55:07 tesla kernel: [  131.516080] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Feb 26 00:55:07 tesla kernel: [  131.521526] ata2.00: configured for UDMA/100
Feb 26 00:55:07 tesla kernel: [  132.740081] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Feb 26 00:55:07 tesla kernel: [  132.741570] ata1.00: configured for UDMA/100
Feb 26 00:55:07 tesla kernel: [  132.781659] PM: resume of devices complete after 1855.686 msecs
Feb 26 00:55:07 tesla kernel: [  132.781836] Restarting tasks ... done.
Feb 26 00:55:07 tesla kernel: [  132.788140] video LNXVIDEO:00: Restoring backlight state
Feb 26 00:55:09 tesla kernel: [  134.804111] uhci_hcd 0000:00:1d.0: PCI INT A disabled
Feb 26 00:55:09 tesla kernel: [  134.824016] ehci_hcd 0000:00:1a.7: PCI INT D disabled
Feb 26 00:55:10 tesla kernel: [  135.856050] ehci_hcd 0000:00:1d.7: PCI INT A disabled
Feb 26 00:55:12 tesla kernel: [  137.105605] ADDRCONF(NETDEV_UP): eth1: link is not ready
Feb 26 00:55:17 tesla kernel: [  142.836059] uhci_hcd 0000:00:1a.0: PCI INT A disabled
Feb 26 00:55:20 tesla kernel: [  145.390063] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
Feb 26 00:55:30 tesla kernel: [  148.646580] PM: Syncing filesystems ... done.
Feb 26 00:55:30 tesla kernel: [  148.652827] Freezing user space processes ... (elapsed 0.01 seconds) done.
Feb 26 00:55:30 tesla kernel: [  148.668077] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
Feb 26 00:55:30 tesla kernel: [  148.684070] Suspending console(s) (use no_console_suspend to debug)
Feb 26 00:55:30 tesla kernel: [  148.700027] ehci_hcd 0000:00:1a.7: BAR 0: set to [mem 0xd6304c00-0xd6304fff] (PCI address [0xd6304c00-0xd6304fff])
Feb 26 00:55:30 tesla kernel: [  148.700107] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 21 (level, low) -> IRQ 21
Feb 26 00:55:30 tesla kernel: [  148.700207] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
Feb 26 00:55:30 tesla kernel: [  148.716025] ehci_hcd 0000:00:1d.7: BAR 0: set to [mem 0xd6304800-0xd6304bff] (PCI address [0xd6304800-0xd6304bff])
Feb 26 00:55:30 tesla kernel: [  148.716099] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
Feb 26 00:55:30 tesla kernel: [  148.716465] sd 0:0:0:0: [sda] Synchronizing SCSI cache
Feb 26 00:55:30 tesla kernel: [  148.716567] sd 0:0:0:0: [sda] Stopping disk
Feb 26 00:55:30 tesla kernel: [  148.810623] wl 0000:04:00.0: PCI INT A disabled
Feb 26 00:55:30 tesla kernel: [  148.810772] ehci_hcd 0000:00:1d.7: PCI INT A disabled
Feb 26 00:55:30 tesla kernel: [  148.810783] uhci_hcd 0000:00:1d.3: PCI INT C disabled
Feb 26 00:55:30 tesla kernel: [  148.810784] [fglrx] IRQ 47 Disabled
Feb 26 00:55:30 tesla kernel: [  148.810792] uhci_hcd 0000:00:1d.2: PCI INT D disabled
Feb 26 00:55:30 tesla kernel: [  148.810801] uhci_hcd 0000:00:1d.1: PCI INT B disabled
Feb 26 00:55:30 tesla kernel: [  148.810810] uhci_hcd 0000:00:1d.0: PCI INT A disabled
Feb 26 00:55:30 tesla kernel: [  148.810867] snd_hda_intel 0000:00:1b.0: PCI INT A disabled
Feb 26 00:55:30 tesla kernel: [  148.810887] [fglrx] Preparing suspend fglrx in kernel.
Feb 26 00:55:30 tesla kernel: [  148.810937] ehci_hcd 0000:00:1a.7: PCI INT D disabled
Feb 26 00:55:30 tesla kernel: [  148.810947] uhci_hcd 0000:00:1a.0: PCI INT A disabled
Feb 26 00:55:30 tesla kernel: [  151.753284] [fglrx] Suspending fglrx in kernel completed.
Feb 26 00:55:30 tesla kernel: [  151.753288] [fglrx] Power down the ASIC .
Feb 26 00:55:30 tesla kernel: [  151.753427] PM: suspend of devices complete after 3037.111 msecs
Feb 26 00:55:30 tesla kernel: [  151.753707] pcieport 0000:00:1c.2: wake-up capability enabled by ACPI
Feb 26 00:55:30 tesla kernel: [  151.800183] PM: late suspend of devices complete after 46.756 msecs
Feb 26 00:55:30 tesla kernel: [  151.800361] ACPI: Preparing to enter system sleep state S3
Feb 26 00:55:30 tesla kernel: [  151.800506] PM: Saving platform NVS memory
Feb 26 00:55:30 tesla kernel: [  151.801035] Disabling non-boot CPUs ...
Feb 26 00:55:30 tesla kernel: [  151.904080] CPU 1 is now offline
Feb 26 00:55:30 tesla kernel: [  151.904637] ACPI: Low-level resume complete
Feb 26 00:55:30 tesla kernel: [  151.904637] PM: Restoring platform NVS memory
Feb 26 00:55:30 tesla kernel: [  151.904637] Enabling non-boot CPUs ...
Feb 26 00:55:30 tesla kernel: [  151.904637] Booting Node 0 Processor 1 APIC 0x1
Feb 26 00:55:30 tesla kernel: [  151.802589] Calibrating delay loop (skipped) already calibrated this CPU
Feb 26 00:55:30 tesla kernel: [  151.924562] Switched to NOHz mode on CPU #1
Feb 26 00:55:30 tesla kernel: [  151.934684] CPU1 is up
Feb 26 00:55:30 tesla kernel: [  151.935801] ACPI: Waking up from system sleep state S3
Feb 26 00:55:30 tesla kernel: [  151.939838] PM: early resume of devices complete after 1.345 msecs
Feb 26 00:55:30 tesla kernel: [  151.939945] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
Feb 26 00:55:30 tesla kernel: [  151.939981] usb usb3: root hub lost power or was reset
Feb 26 00:55:30 tesla kernel: [  151.939996] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 21 (level, low) -> IRQ 21
Feb 26 00:55:30 tesla kernel: [  151.940062] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
Feb 26 00:55:30 tesla kernel: [  151.940196] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
Feb 26 00:55:30 tesla kernel: [  151.940253] usb usb4: root hub lost power or was reset
Feb 26 00:55:30 tesla kernel: [  151.940270] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
Feb 26 00:55:30 tesla kernel: [  151.940276] uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 20 (level, low) -> IRQ 20
Feb 26 00:55:30 tesla kernel: [  151.940313] usb usb5: root hub lost power or was reset
Feb 26 00:55:30 tesla kernel: [  151.940319] usb usb6: root hub lost power or was reset
Feb 26 00:55:30 tesla kernel: [  151.940327] uhci_hcd 0000:00:1d.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Feb 26 00:55:30 tesla kernel: [  151.940334] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
Feb 26 00:55:30 tesla kernel: [  151.940366] usb usb7: root hub lost power or was reset
Feb 26 00:55:30 tesla kernel: [  151.940463] wl 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Feb 26 00:55:30 tesla kernel: [  151.940643] fglrx_pci 0000:01:00.0: power state changed by ACPI to D0
Feb 26 00:55:30 tesla kernel: [  151.940647] fglrx_pci 0000:01:00.0: power state changed by ACPI to D0
Feb 26 00:55:30 tesla kernel: [  151.943136] [fglrx] Power up the ASIC
Feb 26 00:55:30 tesla kernel: [  151.943151] [fglrx] Preparing resume fglrx in kernel.
Feb 26 00:55:30 tesla kernel: [  151.983576] pcieport 0000:00:1c.2: wake-up capability disabled by ACPI
Feb 26 00:55:30 tesla kernel: [  151.983745] sd 0:0:0:0: [sda] Starting disk
Feb 26 00:55:30 tesla kernel: [  152.232046] usb 2-4: reset high speed USB device number 2 using ehci_hcd
Feb 26 00:55:30 tesla kernel: [  152.244878] [fglrx] Resuming fglrx in kernel completed.
Feb 26 00:55:30 tesla kernel: [  152.244995] [fglrx] IRQ 47 Enabled
Feb 26 00:55:30 tesla kernel: [  152.476073] usb 3-1: reset full speed USB device number 2 using uhci_hcd
Feb 26 00:55:30 tesla kernel: [  152.592077] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Feb 26 00:55:30 tesla kernel: [  152.595339] ata2.00: configured for UDMA/100
Feb 26 00:55:30 tesla kernel: [  153.816077] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Feb 26 00:55:30 tesla kernel: [  153.817558] ata1.00: configured for UDMA/100
Feb 26 00:55:30 tesla kernel: [  153.858444] PM: resume of devices complete after 1918.532 msecs
Feb 26 00:55:30 tesla kernel: [  153.858636] Restarting tasks ... done.
Feb 26 00:55:30 tesla kernel: [  153.863497] video LNXVIDEO:00: Restoring backlight state
Feb 26 00:55:32 tesla kernel: [  155.856119] uhci_hcd 0000:00:1d.0: PCI INT A disabled
Feb 26 00:55:32 tesla kernel: [  155.872020] ehci_hcd 0000:00:1a.7: PCI INT D disabled
Feb 26 00:55:33 tesla kernel: [  156.856176] ehci_hcd 0000:00:1d.7: PCI INT A disabled
Feb 26 00:55:35 tesla kernel: [  157.957510] ADDRCONF(NETDEV_UP): eth1: link is not ready
Feb 26 00:55:37 tesla kernel: [  160.844114] uhci_hcd 0000:00:1a.0: PCI INT A disabled
Feb 26 00:55:52 tesla kernel: [  175.675860] [fglrx] IRQ 47 Disabled
Feb 26 00:56:00 tesla kernel: Kernel logging (proc) stopped.
Feb 26 00:56:00 tesla rsyslogd: [origin software="rsyslogd" swVersion="5.8.6" x-pid="1667" x-info="http://www.rsyslog.com"] exiting on signal 15.

edit: zmiana ustawień zarządzania zasilaniem nie pomaga. W jakich modułach szukać przyczyny?

edit2: odkryłem prawdopodobną przyczynę automatycznego przejścia w stan uśpienia. System momentalnie przechodzi do tego trybu w momencie gdy podłącze lub odłącze jakieś urządzenie do portu USB np. pendrive. Najciekawsze jest to, że myszka bezprzewodowa z odbiornikiem USB powoduje przejście do stanu uśpienia w momencie gdy się ją wybudzi ze stanu oszczędności energii (poruszy). Problem więc leży w podsystemie USB.

edit3: za automatyczne usypianie odpowiada pakiet laptop_mode. Pomogła zmiana ustawień (wyłączenie opcji ENABLE_AUTO_MODULES).

Ostatnio edytowany przez pribina (2012-08-06 07:42:05)

Offline

 

Stopka forum

Powered by PunBB
© Copyright 2002–2005 Rickard Andersson
Nas ludzie lubią po prostu, a nie klikając w przyciski ;-)