Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!

Ogłoszenie

Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.

#1  2012-02-15 12:51:44

  jarski185 - Członek DUG

jarski185
Członek DUG
Skąd: Warszawa
Zarejestrowany: 2010-01-19
Serwis

dhcpcd pobiera adres 169.254......

Hej, nagle zepsuł mi się internet na gentoo amd64 i zupełnie nie mogę sobie z tym poradzić. Nie chce poprostu pobrać prawidłowego IP. Korzystam z internetu z UPC poprzez ich modem, który na windowsie się łączy bez przeszkód.
Posiadam kartę

Kod:

05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)

Sterownik do niej jest jako moduł w jądrze ale próbowałem też na stałe( bo kiedyś mi to pomogło)
W pliku /etc/conf.d/net mam czysto zgodnie z instrukcją tam zawartą. Usunąłem też dowiązanie do net.eth0 i zrobiłem na nowo ale też nie udało się.
Przy próbie połączenia:

Kod:

dhcpcd[2398]: version 5.5.4 starting
dhcpcd[2398]: eth0: sending IPv6 Router Solicitation
dhcpcd[2398]: eth0: checking for 169.254.158.203
dhcpcd[2398]: eth0: sending IPv6 Router Solicitation
dhcpcd[2398]: eth0: using IPv4LL address 169.254.158.203
dhcpcd[2398]: forked to background, child pid 2420

IPv6 chyba nie ma znaczenia w tym wypadku bo mam to od zawsze i działało. Proszę o jakąś pomoc w tym temacie.

Ostatnio edytowany przez jarski185 (2012-02-15 12:53:35)

Offline

 

#2  2012-02-15 13:21:07

  Jacekalex - Podobno człowiek...;)

Jacekalex
Podobno człowiek...;)
Skąd: /dev/random
Zarejestrowany: 2008-01-07

Re: dhcpcd pobiera adres 169.254......

W pliku /etc/conf.d/net mam czysto zgodnie z instrukcją tam zawartą.

A co dokładnie tam wpisałeś "zgodnie z instrukcją"?

Bo taki adres w Debianie ustawia automatycznie AVAHI, w Gentoo wpis APIPA w konfigu.

A dokładniej system nie potrafi pobrać adresu z modemu, więc zastępuje to domyślnym adresem, który ma mu zapewnić, że go widać w sieci - w praktyce przydaje się to tylko do drukarek sieciowych.

Więc albo modem wariuje, albo coś masz mocno namieszane w konfigach.

Ostatnio edytowany przez Jacekalex (2012-02-15 13:37:27)


W demokracji każdy naród ma taką władzę, na jaką zasługuje ;)
Si vis pacem  para bellum  ;)       |       Pozdrawiam :)

Offline

 

#3  2012-02-15 13:28:27

  jarski185 - Członek DUG

jarski185
Członek DUG
Skąd: Warszawa
Zarejestrowany: 2010-01-19
Serwis

Re: dhcpcd pobiera adres 169.254......

Mam czysto tam, tzn pusto:P
Modem jak pisałem łączy się pod windowsem więc jeszcze zipie. Konfigi pomiędzy chwilą kiedy działało a momentem zaprzestania pracy nie zmieniły się raczej bo to minął czas restartu kompa.

Offline

 

#4  2012-02-15 13:39:16

  Jacekalex - Podobno człowiek...;)

Jacekalex
Podobno człowiek...;)
Skąd: /dev/random
Zarejestrowany: 2008-01-07

Re: dhcpcd pobiera adres 169.254......

RTFM:
http://www.gentoo.org/doc/pl/handbook/handbook-amd64.xml?part=4

Ostatnio edytowany przez Jacekalex (2012-02-15 13:51:14)


W demokracji każdy naród ma taką władzę, na jaką zasługuje ;)
Si vis pacem  para bellum  ;)       |       Pozdrawiam :)

Offline

 

#5  2012-02-15 14:03:06

  jarski185 - Członek DUG

jarski185
Członek DUG
Skąd: Warszawa
Zarejestrowany: 2010-01-19
Serwis

Re: dhcpcd pobiera adres 169.254......

Nawet ten poprawiony link niewiele wnosi do sprawy bo ja te standardowe rzeczy ujęte w dokumentacji posprawdzałem zanim nasmarowałem ten topic. No ale oczywiście wybaczam Ci to:)

Offline

 

#6  2012-02-15 14:17:18

  Jacekalex - Podobno człowiek...;)

Jacekalex
Podobno człowiek...;)
Skąd: /dev/random
Zarejestrowany: 2008-01-07

Re: dhcpcd pobiera adres 169.254......

A co masz wybaczać?
Przecież sieć się ustawia wg tego handbooka, i wszystkim wszystko działa, tylko Tobie nie?
Pewnie zainstalowaleś jakieś badziewie jak Network Manager lub Wicd, i teraz sieć u Ciebie działa jak w Ubuntu.

Prawdopodobnie też jak sprawdzałeś, to jakieś diabelstwo mieszało w sieci, a Ty o tym nawet nie wiedziałeś.
Bo inaczej skąd się wziął adres:

3.e. APIPA {Automatyczne prywatne adresowanie IP (ang. Automatic Private IP Addressing)}

(sznurek) skoro go nie ustawiłeś w konfigu?

Ale to w końcu Twój komputer i Twój system, i powinieneś wiedzeć, co w nim jest.

Z palca dhclient łapie sieć?
np

Kod:

dhclient eth0

Ostatnio edytowany przez Jacekalex (2012-02-15 14:33:07)


W demokracji każdy naród ma taką władzę, na jaką zasługuje ;)
Si vis pacem  para bellum  ;)       |       Pozdrawiam :)

Offline

 

#7  2012-02-15 14:27:44

  jarski185 - Członek DUG

jarski185
Członek DUG
Skąd: Warszawa
Zarejestrowany: 2010-01-19
Serwis

Re: dhcpcd pobiera adres 169.254......

Wynik próby ręcznego łączenia zamieściłem w pierwszym poście:)

Offline

 

#8  2012-02-15 14:32:53

  Jacekalex - Podobno człowiek...;)

Jacekalex
Podobno człowiek...;)
Skąd: /dev/random
Zarejestrowany: 2008-01-07

Re: dhcpcd pobiera adres 169.254......

To wyszło po aktualizacji?
Bo ja bym wyłączył ipv6, albo spróbował najpierw pokombinować z dhclientem:
np

Kod:

dhclient -4v eth0

Poza tym odinstaluj albo wyłacz wszystkie Network Managery i inne ulepszacze.

Bo adres APIPA nie bierze się z jajka.

W dodatku w logach systemowych masz chyba trochę ciekawsze informacje od dhclienta i innych programów, które mieszają w sieci.

Inne możliwości, to np nieprawidłowa wartość MTU ustawiana w Linuxie (domyślna to 1500 - i prawidłowa) ale nie wszystkie modemy łapią 1500,
i czasem trzeba przestawiać na np 1460 czy podobną.

Ostatnio edytowany przez Jacekalex (2012-02-15 14:37:35)


W demokracji każdy naród ma taką władzę, na jaką zasługuje ;)
Si vis pacem  para bellum  ;)       |       Pozdrawiam :)

Offline

 

#9  2012-02-15 15:21:20

  jarski185 - Członek DUG

jarski185
Członek DUG
Skąd: Warszawa
Zarejestrowany: 2010-01-19
Serwis

Re: dhcpcd pobiera adres 169.254......

To wyszło po restarcie kompa. Konkretnie po wyłączeniu windowsa i włączeniu gentoo. Bez ipv6 dhcpcd wyrzuca:

Kod:

dhcpcd[2401]: version 5.5.4 starting
dhcpcd[2401]: eth0: rebinding lease of Twoj ip
dhcpcd[2401]: eth0: broadcasting for a lease
dhcpcd[2401]: timed out

NM, wicd nie posiadam. Nic innego podobnego też raczej nie.
W info o przydzielaniu APIPA wspominają, że pakiet net-misc/iputils jest konieczny do przydzielenia adresu. Spróbowałem go wywalić ale nawet po usunięciu nie mogę się połączyć.
Próbowałem też wyłączyć flagę zeroconf dla dhcpcd ale nie ma to chyba znaczenia. Zwłaszcza, że tę flagę miałem aktywną wcześniej jak działało.

Offline

 

#10  2012-02-15 16:16:20

  pasqdnik - Pijak ;-P

pasqdnik
Pijak ;-P
Skąd: Wrocław
Zarejestrowany: 2006-03-06

Re: dhcpcd pobiera adres 169.254......

@jarski185
A jak z palca ustawisz IP  (poprzez ifconfig czy ip) i resolv.conf  to wszystko hula ?


Dum spiro - spero ...
pozdrawiam, pasqdnik

Offline

 

#11  2012-02-15 17:25:41

  jarski185 - Członek DUG

jarski185
Członek DUG
Skąd: Warszawa
Zarejestrowany: 2010-01-19
Serwis

Re: dhcpcd pobiera adres 169.254......

Właśnie sprawdzałem i nie zahulało. Nie da się spingować ani nic...Widzę także, że MTU podstawia się prawidłowo na 1500.

Offline

 

#12  2012-02-15 17:44:11

  torrentow - Członek Sejmowej Komisji Śledczej

torrentow
Członek Sejmowej Komisji Śledczej
Skąd: z GNU
Zarejestrowany: 2009-11-23

Re: dhcpcd pobiera adres 169.254......

Witam,
Ja obstawiam 2 przyczyny uszkodzony kabel sieciowy lub na urządzeniu sieciowym np. router jest przypisany stały ip po macu i jeżeli nazwa się nie zgadza to dhcp odmawia posłuszeństwa.
Pozdrawiam,
Towarzysz Torrentow


Każdy sam sobie szkodzi :)
http://img715.imageshack.us/img715/7104/apt.png

Offline

 

#13  2012-02-15 17:49:09

  jarski185 - Członek DUG

jarski185
Członek DUG
Skąd: Warszawa
Zarejestrowany: 2010-01-19
Serwis

Re: dhcpcd pobiera adres 169.254......

Nie mam routera. Modem bezpośrednio wpięty do karty sieciowej. No a kabel chyba sprawny bo właśnie z niego pisze pod windką.

Offline

 

#14  2012-02-15 19:04:57

  NIC - Członek DUG

NIC
Członek DUG
Skąd: Wrocław
Zarejestrowany: 2006-12-25
Serwis

Re: dhcpcd pobiera adres 169.254......

Jeśli można prosić logi to może uda się znaleźć problem:

Kod:

ethtool eth0 # jak inny interfejs to proszę zmienić
ethtool -i eth0
ifconfig -a
iptables -nvL
iptables -t nat  -nvL
dmesg # po próbie łączenia z dhcp

Zabij demona DHCP w jakiś sposób (service coś lub pkill dhcpd, pkill dhclient) i uruchom go jeszcze raz.

I jeszcze weź użyj Wiresharka na tym interfejsie i zrzuć nam logi jak próbujesz "dhclient"

A modem możesz pingować? (ifconfig eth0 192.168.1.4; ifconfig eth0 up ; ping 192.168.1.4)

Ostatnio edytowany przez NIC (2012-02-15 19:05:38)


Stronka-dom: http://titek.victorygames.pl
Jabber: nic@jabster.pl
Hobby: kompilowanie Linuksa, Bluetooth
Dystrybucja: żadna, bliski krewny LFS, składak

Offline

 

#15  2012-02-15 19:37:23

  jarski185 - Członek DUG

jarski185
Członek DUG
Skąd: Warszawa
Zarejestrowany: 2010-01-19
Serwis

Re: dhcpcd pobiera adres 169.254......

Nie mam ethtoola ani wiresharka ale jak są konieczne to zaraz jakieś live cd spróbuje odpalić i je zainstaluje.


Daje to co udało mi się zrobić:

Kod:

jarski185@kompasek ~ $ sudo ifconfig -a
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500  metric 1
        inet6 fe80::225:22ff:fec3:cd3a  prefixlen 64  scopeid 0x20<link>
        ether 00:25:22:c3:cd:3a  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
        device interrupt 46  base 0xe000  

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 16436  metric 1
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 0  (Local Loopback)
        RX packets 36  bytes 2752 (2.6 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 36  bytes 2752 (2.6 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

Kod:

jarski185@kompasek ~ $ sudo iptables -nvL

Chain INPUT (policy DROP 68129 packets, 18M bytes)
 pkts bytes target     prot opt in     out     source               destination                                                            
        
30692 5261K ACCEPT     all  --  lo     *       0.0.0.0/0            0.0.0.0/0                                                              
        
5350K 7207M ACCEPT     all  --  *      *       0.0.0.0/0            0.0.0.0/0                                                              
         state RELATED,ESTABLISHED
 1400 73572 ACCEPT     tcp  --  *      *       0.0.0.0/0            0.0.0.0/0                                                              
         tcp dpt:56890
 2112  139K ACCEPT     udp  --  *      *       0.0.0.0/0            0.0.0.0/0                                                              
         udp dpt:56890

Chain FORWARD (policy DROP 0 packets, 0 bytes)
 pkts bytes target     prot opt in     out     source               destination                                                            
        
    0     0 ACCEPT     all  --  *      lo      0.0.0.0/0            0.0.0.0/0                                                              
        
    0     0 ACCEPT     all  --  *      *       0.0.0.0/0            0.0.0.0/0                                                              
         state RELATED,ESTABLISHED

Chain OUTPUT (policy ACCEPT 3691K packets, 917M bytes)
 pkts bytes target     prot opt in     out     source               destination

Kod:

jarski185@kompasek ~ $ sudo iptables -t nat  -nvL
Chain PREROUTING (policy ACCEPT 70076 packets, 19M bytes)
 pkts bytes target     prot opt in     out     source               destination         
                                
Chain INPUT (policy ACCEPT 2642 packets, 163K bytes)
 pkts bytes target     prot opt in     out     source               destination         
                                
Chain OUTPUT (policy ACCEPT 53536 packets, 3335K bytes)
 pkts bytes target     prot opt in     out     source               destination         

Chain POSTROUTING (policy ACCEPT 53536 packets, 3335K bytes)
 pkts bytes target     prot opt in     out     source               destination

Nie wiem, które info z dmesg mogą być ważne więc daje wszystko:)

Kod:

jarski185@kompasek ~ $ dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Linux version 3.2.5-zen+ (root@kompasek) (gcc version 4.5.3 (Gentoo 4.5.3-r2 p1.0, pie-0.4.7) ) #4 ZEN SMP Wed Feb 15 12:28:32 CET 2012
[    0.000000] Command line: root=/dev/sda9
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
[    0.000000]  BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000df35b000 (usable)
[    0.000000]  BIOS-e820: 00000000df35b000 - 00000000df3ac000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000df3ac000 - 00000000df60c000 (reserved)
[    0.000000]  BIOS-e820: 00000000df60c000 - 00000000df60d000 (usable)
[    0.000000]  BIOS-e820: 00000000df60d000 - 00000000df60e000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000df60e000 - 00000000df618000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000df618000 - 00000000df63d000 (reserved)
[    0.000000]  BIOS-e820: 00000000df63d000 - 00000000df680000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000df680000 - 00000000df800000 (usable)
[    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed40000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 000000011f800000 (usable)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI 2.6 present.
[    0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./P67 Performance, BIOS P1.00 04/26/2011
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0x11f800 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-E7FFF uncachable
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F00000000 write-back
[    0.000000]   1 base 100000000 mask FE0000000 write-back
[    0.000000]   2 base 0E0000000 mask FE0000000 uncachable
[    0.000000]   3 base 11F800000 mask FFF800000 uncachable
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820 update range: 00000000e0000000 - 0000000100000000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0xdf800 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [ffff8800000fcf60] fcf60
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 20480
[    0.000000] init_memory_mapping: 0000000000000000-00000000df800000
[    0.000000]  0000000000 - 00df800000 page 2M
[    0.000000] kernel direct mapping tables up to df800000 @ 1fffb000-20000000
[    0.000000] init_memory_mapping: 0000000100000000-000000011f800000
[    0.000000]  0100000000 - 011f800000 page 2M
[    0.000000] kernel direct mapping tables up to 11f800000 @ df7fa000-df800000
[    0.000000] ACPI: RSDP 00000000000f0450 00024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 00000000df3a4068 00054 (v01 ALASKA    A M I 01072009 AMI  00010013)
[    0.000000] ACPI: FACP 00000000df3ab620 000F4 (v04 ALASKA    A M I 01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 00000000df3a4150 074CC (v02 ALASKA    A M I 00000000 INTL 20051117)
[    0.000000] ACPI: FACS 00000000df60ff80 00040
[    0.000000] ACPI: APIC 00000000df3ab718 00072 (v03 ALASKA    A M I 01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 00000000df3ab790 00102 (v01 AMICPU     PROC 00000001 MSFT 03000001)
[    0.000000] ACPI: MCFG 00000000df3ab898 0003C (v01 ALASKA    A M I 01072009 MSFT 00000097)
[    0.000000] ACPI: AAFT 00000000df3ab8d8 00070 (v01 ALASKA OEMAAFT  01072009 MSFT 00000097)
[    0.000000] ACPI: HPET 00000000df3ab948 00038 (v01 ALASKA    A M I 01072009 AMI. 00000004)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-000000011f800000
[    0.000000] Initmem setup node 0 0000000000000000-000000011f800000
[    0.000000]   NODE_DATA [000000011f7fb000 - 000000011f7fffff]
[    0.000000]  [ffffea0000000000-ffffea00047fffff] PMD -> [ffff88011ae00000-ffff88011edfffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x0011f800
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[5] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009e
[    0.000000]     0: 0x00000100 -> 0x000df35b
[    0.000000]     0: 0x000df60c -> 0x000df60d
[    0.000000]     0: 0x000df680 -> 0x000df800
[    0.000000]     0: 0x00100000 -> 0x0011f800
[    0.000000] On node 0 totalpages: 1043562
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 5 pages reserved
[    0.000000]   DMA zone: 3913 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 16320 pages used for memmap
[    0.000000]   DMA32 zone: 894236 pages, LIFO batch:31
[    0.000000]   Normal zone: 2016 pages used for memmap
[    0.000000]   Normal zone: 127008 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000df35b000 - 00000000df3ac000
[    0.000000] PM: Registered nosave memory: 00000000df3ac000 - 00000000df60c000
[    0.000000] PM: Registered nosave memory: 00000000df60d000 - 00000000df60e000
[    0.000000] PM: Registered nosave memory: 00000000df60e000 - 00000000df618000
[    0.000000] PM: Registered nosave memory: 00000000df618000 - 00000000df63d000
[    0.000000] PM: Registered nosave memory: 00000000df63d000 - 00000000df680000
[    0.000000] PM: Registered nosave memory: 00000000df800000 - 00000000fed1c000
[    0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed40000
[    0.000000] PM: Registered nosave memory: 00000000fed40000 - 00000000ff000000
[    0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at df800000 (gap: df800000:1f51c000)
[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 26 pages/cpu @ffff88011f400000 s74624 r8192 d23680 u524288
[    0.000000] pcpu-alloc: s74624 r8192 d23680 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1025157
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: root=/dev/sda9
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 4025396k/4710400k available (8508k kernel code, 536152k absent, 148852k reserved, 6526k data, 668k init)
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:4352 nr_irqs:1192 16
[    0.000000] Extended CMOS year: 2000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.001000] Detected 3291.924 MHz processor.
[    0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 6583.84 BogoMIPS (lpj=3291924)
[    0.000309] pid_max: default: 32768 minimum: 301
[    0.000466] Security Framework initialized
[    0.000614] SELinux:  Initializing.
[    0.000761] SELinux:  Starting in permissive mode
[    0.000994] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.002205] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.002774] Mount-cache hash table entries: 256
[    0.003016] Initializing cgroup subsys freezer
[    0.003176] Initializing cgroup subsys bfqio
[    0.003337] CPU: Physical Processor ID: 0
[    0.003482] CPU: Processor Core ID: 0
[    0.003629] ENERGY_PERF_BIAS: Set to ‘normal’, was ‘performance'
[    0.003630] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.003937] mce: CPU supports 9 MCE banks
[    0.004098] CPU0: Thermal monitoring enabled (TM1)
[    0.004250] using mwait in idle threads.
[    0.004453] ACPI: Core revision 20110623
[    0.010383] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.020533] CPU0: Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz stepping 07
[    0.122093] Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver.
[    0.122505] PEBS disabled due to CPU errata.
[    0.122652] ... version:                3
[    0.122798] ... bit width:              48
[    0.122943] ... generic registers:      8
[    0.123088] ... value mask:             0000ffffffffffff
[    0.123238] ... max period:             000000007fffffff
[    0.123387] ... fixed-purpose events:   3
[    0.123532] ... event mask:             00000007000000ff
[    0.123774] Booting Node   0, Processors  #1
[    0.123909] smpboot cpu 1: start_ip = 99000
[    0.214246]  #2
[    0.214314] smpboot cpu 2: start_ip = 99000
[    0.305151]  #3
[    0.305221] smpboot cpu 3: start_ip = 99000
[    0.396118] Brought up 4 CPUs
[    0.396263] Total of 4 processors activated (26336.44 BogoMIPS).
[    0.398548] PM: Registering ACPI NVS region at df35b000 (331776 bytes)
[    0.398708] PM: Registering ACPI NVS region at df60e000 (40960 bytes)
[    0.398861] PM: Registering ACPI NVS region at df63d000 (274432 bytes)
[    0.399055] xor: automatically using best checksumming function: generic_sse
[    0.404047]    generic_sse: 14716.000 MB/sec
[    0.404192] xor: using function: generic_sse (14716.000 MB/sec)
[    0.404366] RTC time: 19:18:14, date: 02/15/12
[    0.404534] NET: Registered protocol family 16
[    0.404715] kworker/u:0 used greatest stack depth: 6288 bytes left
[    0.404869] kworker/u:0 used greatest stack depth: 5496 bytes left
[    0.404993] ACPI: bus type pci registered
[    0.405045] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.405046] PCI: not using MMCONFIG
[    0.405047] PCI: Using configuration type 1 for base access
[    0.409233] bio: create slab <bio-0> at 0
[    0.409445] ACPI: Added _OSI(Module Device)
[    0.409592] ACPI: Added _OSI(Processor Device)
[    0.409739] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.409886] ACPI: Added _OSI(Processor Aggregator Device)
[    0.410773] ACPI: EC: Look up EC in DSDT
[    0.411532] ACPI: Executed 1 blocks of module-level executable AML code
[    0.413674] ACPI: SSDT 00000000df60ec18 0038C (v01    AMI      IST 00000001 MSFT 03000001)
[    0.414241] ACPI: Dynamic OEM Table Load:
[    0.414508] ACPI: SSDT           (null) 0038C (v01    AMI      IST 00000001 MSFT 03000001)
[    0.414875] ACPI: SSDT 00000000df60fe18 00084 (v01    AMI      CST 00000001 MSFT 03000001)
[    0.415397] ACPI: Dynamic OEM Table Load:
[    0.415664] ACPI: SSDT           (null) 00084 (v01    AMI      CST 00000001 MSFT 03000001)
[    0.416306] ACPI: Interpreter enabled
[    0.416451] ACPI: (supports S0 S1 S3 S4 S5)
[    0.416911] ACPI: Using IOAPIC for interrupt routing
[    0.417073] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.417350] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
[    0.426776] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.430783] ACPI: No dock devices found.
[    0.430930] PCI: Using host bridge windows from ACPI; if necessary, use “pci=nocrs” and report a bug
[    0.431292] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.431594] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
[    0.433209] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[    0.433363] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.433591] pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000dffff]
[    0.433820] pci_root PNP0A08:00: host bridge window [mem 0xe0000000-0xf7ffffff]
[    0.434055] pci 0000:00:00.0: [8086:0100] type 0 class 0x000600
[    0.434082] pci 0000:00:01.0: [8086:0101] type 1 class 0x000604
[    0.434105] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.434108] pci 0000:00:01.0: PME# disabled
[    0.434163] pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780
[    0.434194] pci 0000:00:16.0: reg 10: [mem 0xf6307000-0xf630700f 64bit]
[    0.434297] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.434302] pci 0000:00:16.0: PME# disabled
[    0.434343] pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03
[    0.434371] pci 0000:00:1a.0: reg 10: [mem 0xf6306000-0xf63063ff]
[    0.434497] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.434502] pci 0000:00:1a.0: PME# disabled
[    0.434532] pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403
[    0.434553] pci 0000:00:1b.0: reg 10: [mem 0xf6300000-0xf6303fff 64bit]
[    0.434652] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.434656] pci 0000:00:1b.0: PME# disabled
[    0.434683] pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604
[    0.434795] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.434799] pci 0000:00:1c.0: PME# disabled
[    0.434829] pci 0000:00:1c.1: [8086:1c12] type 1 class 0x000604
[    0.434941] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.434946] pci 0000:00:1c.1: PME# disabled
[    0.434981] pci 0000:00:1c.5: [8086:1c1a] type 1 class 0x000604
[    0.435093] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.435097] pci 0000:00:1c.5: PME# disabled
[    0.435128] pci 0000:00:1c.6: [8086:1c1c] type 1 class 0x000604
[    0.435240] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[    0.435244] pci 0000:00:1c.6: PME# disabled
[    0.435274] pci 0000:00:1c.7: [8086:244e] type 1 class 0x000604
[    0.435387] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[    0.435391] pci 0000:00:1c.7: PME# disabled
[    0.435426] pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03
[    0.435453] pci 0000:00:1d.0: reg 10: [mem 0xf6305000-0xf63053ff]
[    0.435579] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.435584] pci 0000:00:1d.0: PME# disabled
[    0.435612] pci 0000:00:1f.0: [8086:1c46] type 0 class 0x000601
[    0.435772] pci 0000:00:1f.2: [8086:1c00] type 0 class 0x000101
[    0.435793] pci 0000:00:1f.2: reg 10: [io  0xf0d0-0xf0d7]
[    0.435804] pci 0000:00:1f.2: reg 14: [io  0xf0c0-0xf0c3]
[    0.435811] pci 0000:00:1f.2: reg 18: [io  0xf0b0-0xf0b7]
[    0.435822] pci 0000:00:1f.2: reg 1c: [io  0xf0a0-0xf0a3]
[    0.435832] pci 0000:00:1f.2: reg 20: [io  0xf090-0xf09f]
[    0.435843] pci 0000:00:1f.2: reg 24: [io  0xf080-0xf08f]
[    0.435910] pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05
[    0.435931] pci 0000:00:1f.3: reg 10: [mem 0xf6304000-0xf63040ff 64bit]
[    0.435960] pci 0000:00:1f.3: reg 20: [io  0xf000-0xf01f]
[    0.436006] pci 0000:00:1f.5: [8086:1c08] type 0 class 0x000101
[    0.436028] pci 0000:00:1f.5: reg 10: [io  0xf070-0xf077]
[    0.436038] pci 0000:00:1f.5: reg 14: [io  0xf060-0xf063]
[    0.436049] pci 0000:00:1f.5: reg 18: [io  0xf050-0xf057]
[    0.436059] pci 0000:00:1f.5: reg 1c: [io  0xf040-0xf043]
[    0.436069] pci 0000:00:1f.5: reg 20: [io  0xf030-0xf03f]
[    0.436080] pci 0000:00:1f.5: reg 24: [io  0xf020-0xf02f]
[    0.436167] pci 0000:01:00.0: [10de:1200] type 0 class 0x000300
[    0.436174] pci 0000:01:00.0: reg 10: [mem 0xf4000000-0xf5ffffff]
[    0.436183] pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xe7ffffff 64bit pref]
[    0.436191] pci 0000:01:00.0: reg 1c: [mem 0xe8000000-0xebffffff 64bit pref]
[    0.436197] pci 0000:01:00.0: reg 24: [io  0xe000-0xe07f]
[    0.436202] pci 0000:01:00.0: reg 30: [mem 0xf6000000-0xf607ffff pref]
[    0.436246] pci 0000:01:00.1: [10de:0e0c] type 0 class 0x000403
[    0.436254] pci 0000:01:00.1: reg 10: [mem 0xf6080000-0xf6083fff]
[    0.438120] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.438281] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.438282] pci 0000:00:01.0:   bridge window [mem 0xf4000000-0xf60fffff]
[    0.438285] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xebffffff 64bit pref]
[    0.438345] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    0.438592] pci 0000:03:00.0: [1106:0415] type 0 class 0x000101
[    0.438616] pci 0000:03:00.0: reg 10: [io  0xd040-0xd047]
[    0.438633] pci 0000:03:00.0: reg 14: [io  0xd030-0xd033]
[    0.438650] pci 0000:03:00.0: reg 18: [io  0xd020-0xd027]
[    0.438667] pci 0000:03:00.0: reg 1c: [io  0xd010-0xd013]
[    0.438684] pci 0000:03:00.0: reg 20: [io  0xd000-0xd00f]
[    0.438717] pci 0000:03:00.0: reg 30: [mem 0xf6200000-0xf620ffff pref]
[    0.438803] pci 0000:03:00.0: supports D1 D2
[    0.438804] pci 0000:03:00.0: PME# supported from D1 D2 D3hot
[    0.438810] pci 0000:03:00.0: PME# disabled
[    0.440124] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[    0.440288] pci 0000:00:1c.1:   bridge window [io  0xd000-0xdfff]
[    0.440292] pci 0000:00:1c.1:   bridge window [mem 0xf6200000-0xf62fffff]
[    0.440385] pci 0000:04:00.0: [1b6f:7023] type 0 class 0x000c03
[    0.440417] pci 0000:04:00.0: reg 10: [mem 0xf6100000-0xf6107fff 64bit]
[    0.440574] pci 0000:04:00.0: supports D1 D2
[    0.440575] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.440581] pci 0000:04:00.0: PME# disabled
[    0.442125] pci 0000:00:1c.5: PCI bridge to [bus 04-04]
[    0.442292] pci 0000:00:1c.5:   bridge window [mem 0xf6100000-0xf61fffff]
[    0.442385] pci 0000:05:00.0: [10ec:8168] type 0 class 0x000200
[    0.442409] pci 0000:05:00.0: reg 10: [io  0xc000-0xc0ff]
[    0.442451] pci 0000:05:00.0: reg 18: [mem 0xec104000-0xec104fff 64bit pref]
[    0.442477] pci 0000:05:00.0: reg 20: [mem 0xec100000-0xec103fff 64bit pref]
[    0.442591] pci 0000:05:00.0: supports D1 D2
[    0.442592] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.442598] pci 0000:05:00.0: PME# disabled
[    0.444125] pci 0000:00:1c.6: PCI bridge to [bus 05-05]
[    0.444288] pci 0000:00:1c.6:   bridge window [io  0xc000-0xcfff]
[    0.444298] pci 0000:00:1c.6:   bridge window [mem 0xec100000-0xec1fffff 64bit pref]
[    0.444376] pci 0000:06:00.0: [1b21:1080] type 1 class 0x000604
[    0.444524] pci 0000:00:1c.7: PCI bridge to [bus 06-07] (subtractive decode)
[    0.444690] pci 0000:00:1c.7:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.444691] pci 0000:00:1c.7:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.444693] pci 0000:00:1c.7:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.444694] pci 0000:00:1c.7:   bridge window [mem 0x000c8000-0x000dffff] (subtractive decode)
[    0.444696] pci 0000:00:1c.7:   bridge window [mem 0xe0000000-0xf7ffffff] (subtractive decode)
[    0.444833] pci 0000:06:00.0: PCI bridge to [bus 07-07] (subtractive decode)
[    0.445012] pci 0000:06:00.0:   bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[    0.445014] pci 0000:06:00.0:   bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[    0.445015] pci 0000:06:00.0:   bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[    0.445017] pci 0000:06:00.0:   bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[    0.445018] pci 0000:06:00.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.445020] pci 0000:06:00.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.445021] pci 0000:06:00.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.445023] pci 0000:06:00.0:   bridge window [mem 0x000c8000-0x000dffff] (subtractive decode)
[    0.445024] pci 0000:06:00.0:   bridge window [mem 0xe0000000-0xf7ffffff] (subtractive decode)
[    0.445072] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.445131] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[    0.445147] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
[    0.445168] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
[    0.445183] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6._PRT]
[    0.445197] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7._PRT]
[    0.445213] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7.PE2P._PRT]
[    0.445240] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    0.445306]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.445578]  pci0000:00: ACPI _OSC control (0x1c) granted
[    0.448427] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.449339] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.450246] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
[    0.451089] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
[    0.451934] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
[    0.452972] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
[    0.454010] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.454915] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15)
[    0.455858] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.456091] vgaarb: loaded
[    0.456233] vgaarb: bridge control possible 0000:01:00.0
[    0.456455] SCSI subsystem initialized
[    0.456643] libata version 3.00 loaded.
[    0.456726] usbcore: registered new interface driver usbfs
[    0.456896] usbcore: registered new interface driver hub
[    0.457063] usbcore: registered new device driver usb
[    0.457315] Advanced Linux Sound Architecture Driver Version 1.0.24.
[    0.457468] PCI: Using ACPI for IRQ routing
[    0.459905] PCI: pci_cache_line_size set to 64 bytes
[    0.459983] reserve RAM buffer: 000000000009ec00 - 000000000009ffff 
[    0.459985] reserve RAM buffer: 00000000df35b000 - 00000000dfffffff 
[    0.459987] reserve RAM buffer: 00000000df60d000 - 00000000dfffffff 
[    0.459988] reserve RAM buffer: 00000000df800000 - 00000000dfffffff 
[    0.459990] reserve RAM buffer: 000000011f800000 - 000000011fffffff 
[    0.460219] NetLabel: Initializing
[    0.460363] NetLabel:  domain hash size = 128
[    0.460509] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.460665] NetLabel:  unlabeled traffic allowed by default
[    0.460821] cfg80211: Calling CRDA to update world regulatory domain
[    0.460858] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.460861] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.463908] Switching to clocksource hpet
[    0.468265] pnp: PnP ACPI init
[    0.468412] ACPI: bus type pnp registered
[    0.468638] pnp 00:00: [bus 00-ff]
[    0.468640] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.468643] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.468644] pnp 00:00: [io  0x0d00-0xffff window]
[    0.468645] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.468647] pnp 00:00: [mem 0x000c8000-0x000dffff window]
[    0.468648] pnp 00:00: [mem 0xe0000000-0xf7ffffff window]
[    0.468649] pnp 00:00: [mem 0x00000000 window]
[    0.468700] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.468734] pnp 00:01: [mem 0xfed10000-0xfed19fff]
[    0.468735] pnp 00:01: [mem 0xf8000000-0xfbffffff]
[    0.468736] pnp 00:01: [mem 0xfed90000-0xfed93fff]
[    0.468737] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
[    0.468738] pnp 00:01: [mem 0xfee00000-0xfee0ffff]
[    0.468776] system 00:01: [mem 0xfed10000-0xfed19fff] has been reserved
[    0.468931] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.469085] system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.469248] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.469402] system 00:01: [mem 0xfee00000-0xfee0ffff] has been reserved
[    0.469556] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.469590] pnp 00:02: [io  0x0000-0xffffffffffffffff disabled]
[    0.469591] pnp 00:02: [io  0x0290-0x029f]
[    0.469592] pnp 00:02: [io  0x0000-0xffffffffffffffff disabled]
[    0.469630] system 00:02: [io  0x0290-0x029f] has been reserved
[    0.469782] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.469956] pnp 00:03: [io  0x03f0-0x03f5]
[    0.469957] pnp 00:03: [io  0x03f7]
[    0.469964] pnp 00:03: [irq 6]
[    0.469965] pnp 00:03: [dma 2]
[    0.470008] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.470079] pnp 00:04: [dma 4]
[    0.470080] pnp 00:04: [io  0x0000-0x000f]
[    0.470081] pnp 00:04: [io  0x0081-0x0083]
[    0.470082] pnp 00:04: [io  0x0087]
[    0.470083] pnp 00:04: [io  0x0089-0x008b]
[    0.470084] pnp 00:04: [io  0x008f]
[    0.470085] pnp 00:04: [io  0x00c0-0x00df]
[    0.470121] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.470130] pnp 00:05: [io  0x0070-0x0071]
[    0.470134] pnp 00:05: [irq 8]
[    0.470158] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.470163] pnp 00:06: [io  0x0061]
[    0.470186] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.470196] pnp 00:07: [io  0x0010-0x001f]
[    0.470197] pnp 00:07: [io  0x0022-0x003f]
[    0.470199] pnp 00:07: [io  0x0044-0x005f]
[    0.470200] pnp 00:07: [io  0x0062-0x0063]
[    0.470201] pnp 00:07: [io  0x0065-0x006f]
[    0.470202] pnp 00:07: [io  0x0072-0x007f]
[    0.470203] pnp 00:07: [io  0x0080]
[    0.470204] pnp 00:07: [io  0x0084-0x0086]
[    0.470205] pnp 00:07: [io  0x0088]
[    0.470206] pnp 00:07: [io  0x008c-0x008e]
[    0.470207] pnp 00:07: [io  0x0090-0x009f]
[    0.470208] pnp 00:07: [io  0x00a2-0x00bf]
[    0.470209] pnp 00:07: [io  0x00e0-0x00ef]
[    0.470210] pnp 00:07: [io  0x04d0-0x04d1]
[    0.470247] system 00:07: [io  0x04d0-0x04d1] has been reserved
[    0.470399] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.470405] pnp 00:08: [io  0x00f0-0x00ff]
[    0.470409] pnp 00:08: [irq 13]
[    0.470433] pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.470448] pnp 00:09: [io  0x0060]
[    0.470449] pnp 00:09: [io  0x0064]
[    0.470453] pnp 00:09: [irq 1]
[    0.470484] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.470505] pnp 00:0a: [irq 12]
[    0.470533] pnp 00:0a: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[    0.470677] pnp 00:0b: [io  0x03f8-0x03ff]
[    0.470681] pnp 00:0b: [irq 4]
[    0.470682] pnp 00:0b: [dma 0 disabled]
[    0.470727] pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.470828] pnp 00:0c: [io  0x0400-0x0453]
[    0.470829] pnp 00:0c: [io  0x0458-0x047f]
[    0.470830] pnp 00:0c: [io  0x1180-0x119f]
[    0.470831] pnp 00:0c: [io  0x0500-0x057f]
[    0.470832] pnp 00:0c: [mem 0xfed1c000-0xfed1ffff]
[    0.470833] pnp 00:0c: [mem 0xfec00000-0xfecfffff]
[    0.470836] pnp 00:0c: [mem 0xfed08000-0xfed08fff]
[    0.470837] pnp 00:0c: [mem 0xff000000-0xffffffff]
[    0.470873] system 00:0c: [io  0x0400-0x0453] has been reserved
[    0.471025] system 00:0c: [io  0x0458-0x047f] has been reserved
[    0.471193] system 00:0c: [io  0x1180-0x119f] has been reserved
[    0.471345] system 00:0c: [io  0x0500-0x057f] has been reserved
[    0.471497] system 00:0c: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.471651] system 00:0c: [mem 0xfec00000-0xfecfffff] could not be reserved
[    0.471806] system 00:0c: [mem 0xfed08000-0xfed08fff] has been reserved
[    0.471959] system 00:0c: [mem 0xff000000-0xffffffff] has been reserved
[    0.472122] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.472144] pnp 00:0d: [io  0x0454-0x0457]
[    0.472181] system 00:0d: [io  0x0454-0x0457] has been reserved
[    0.472334] system 00:0d: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.472426] pnp 00:0e: [mem 0xfed00000-0xfed003ff]
[    0.472459] pnp 00:0e: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.472550] pnp: PnP ACPI: found 15 devices
[    0.472695] ACPI: ACPI bus type pnp unregistered
[    0.477422] PCI: max bus depth: 2 pci_try_num: 3
[    0.477490] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.477640] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.477793] pci 0000:00:01.0:   bridge window [mem 0xf4000000-0xf60fffff]
[    0.477947] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xebffffff 64bit pref]
[    0.478192] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    0.478354] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[    0.478506] pci 0000:00:1c.1:   bridge window [io  0xd000-0xdfff]
[    0.478662] pci 0000:00:1c.1:   bridge window [mem 0xf6200000-0xf62fffff]
[    0.478825] pci 0000:00:1c.5: PCI bridge to [bus 04-04]
[    0.478979] pci 0000:00:1c.5:   bridge window [mem 0xf6100000-0xf61fffff]
[    0.479154] pci 0000:00:1c.6: PCI bridge to [bus 05-05]
[    0.479304] pci 0000:00:1c.6:   bridge window [io  0xc000-0xcfff]
[    0.479464] pci 0000:00:1c.6:   bridge window [mem 0xec100000-0xec1fffff 64bit pref]
[    0.479699] pci 0000:06:00.0: PCI bridge to [bus 07-07]
[    0.479871] pci 0000:00:1c.7: PCI bridge to [bus 06-07]
[    0.480041] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.480214] pci 0000:00:01.0: setting latency timer to 64
[    0.480222] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.480379] pci 0000:00:1c.0: setting latency timer to 64
[    0.480385] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[    0.480542] pci 0000:00:1c.1: setting latency timer to 64
[    0.480548] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[    0.480705] pci 0000:00:1c.5: setting latency timer to 64
[    0.480712] pci 0000:00:1c.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.480869] pci 0000:00:1c.6: setting latency timer to 64
[    0.480876] pci 0000:00:1c.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    0.481034] pci 0000:00:1c.7: setting latency timer to 64
[    0.481040] pci 0000:06:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    0.481214] pci 0000:06:00.0: setting latency timer to 64
[    0.481218] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.481220] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.481221] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.481222] pci_bus 0000:00: resource 7 [mem 0x000c8000-0x000dffff]
[    0.481224] pci_bus 0000:00: resource 8 [mem 0xe0000000-0xf7ffffff]
[    0.481225] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.481226] pci_bus 0000:01: resource 1 [mem 0xf4000000-0xf60fffff]
[    0.481228] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xebffffff 64bit pref]
[    0.481229] pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
[    0.481231] pci_bus 0000:03: resource 1 [mem 0xf6200000-0xf62fffff]
[    0.481232] pci_bus 0000:04: resource 1 [mem 0xf6100000-0xf61fffff]
[    0.481233] pci_bus 0000:05: resource 0 [io  0xc000-0xcfff]
[    0.481235] pci_bus 0000:05: resource 2 [mem 0xec100000-0xec1fffff 64bit pref]
[    0.481236] pci_bus 0000:06: resource 4 [io  0x0000-0x0cf7]
[    0.481237] pci_bus 0000:06: resource 5 [io  0x0d00-0xffff]
[    0.481239] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff]
[    0.481240] pci_bus 0000:06: resource 7 [mem 0x000c8000-0x000dffff]
[    0.481242] pci_bus 0000:06: resource 8 [mem 0xe0000000-0xf7ffffff]
[    0.481243] pci_bus 0000:07: resource 8 [io  0x0000-0x0cf7]
[    0.481244] pci_bus 0000:07: resource 9 [io  0x0d00-0xffff]
[    0.481246] pci_bus 0000:07: resource 10 [mem 0x000a0000-0x000bffff]
[    0.481247] pci_bus 0000:07: resource 11 [mem 0x000c8000-0x000dffff]
[    0.481248] pci_bus 0000:07: resource 12 [mem 0xe0000000-0xf7ffffff]
[    0.481266] NET: Registered protocol family 2
[    0.481500] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.482365] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.484280] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.484644] TCP: Hash tables configured (established 524288 bind 65536)
[    0.484798] TCP reno registered
[    0.484946] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.485125] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.485340] NET: Registered protocol family 1
[    0.485539] RPC: Registered named UNIX socket transport module.
[    0.485691] RPC: Registered udp transport module.
[    0.485838] RPC: Registered tcp transport module.
[    0.485985] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.486196] pci 0000:00:1a.0: EHCI: BIOS handoff
[    0.609157] pci 0000:00:1d.0: EHCI: BIOS handoff
[    0.732136] pci 0000:01:00.0: Boot video device
[    0.732210] PCI: CLS 64 bytes, default 64
[    0.732247] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.732401] Placing 64MB software IO TLB between ffff8800db35b000 - ffff8800df35b000
[    0.732630] software IO TLB at phys 0xdb35b000 - 0xdf35b000
[    0.733500] microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x14
[    0.733655] microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x14
[    0.733810] microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x14
[    0.733966] microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x14
[    0.734142] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.734498] audit: initializing netlink socket (disabled)
[    0.734653] type=2000 audit(1329333494.592:1): initialized
[    0.753734] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.755680] VFS: Disk quotas dquot_6.5.2
[    0.755869] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.756411] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.756768] fuse init (API version 7.17)
[    0.757040] JFS: nTxBlock = 8192, nTxLock = 65536
[    0.758403] SGI XFS with security attributes, large block/inode numbers, no debug enabled
[    0.759189] Btrfs loaded
[    0.759420] aufs 3.2
[    0.759564] msgmni has been set to 7862
[    0.759770] SELinux:  Registering netfilter hooks
[    0.759947] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.760196] io scheduler noop registered
[    0.760341] io scheduler deadline registered
[    0.760519] io scheduler cfq registered (default)
[    0.760696] io scheduler bfq registered
[    0.760901] pcieport 0000:00:01.0: setting latency timer to 64
[    0.760920] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.760982] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.761036] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[    0.761131] pcieport 0000:00:1c.1: setting latency timer to 64
[    0.761186] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
[    0.761272] pcieport 0000:00:1c.5: setting latency timer to 64
[    0.761326] pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X
[    0.761412] pcieport 0000:00:1c.6: setting latency timer to 64
[    0.761466] pcieport 0000:00:1c.6: irq 44 for MSI/MSI-X
[    0.761598] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.761778] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.026256] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.112818] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.133346] Non-volatile memory driver v1.3
[    1.133494] Linux agpgart interface v0.103
[    1.133846] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    1.134079] ACPI: Power Button [PWRB]
[    1.134265] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    1.134496] ACPI: Power Button [PWRF]
[    1.134866] Monitor-Mwait will be used to enter C-3 state
[    1.134877] Monitor-Mwait will be used to enter C-3 state
[    1.134892] ACPI: acpi_idle registered with cpuidle
[    1.136382] [drm] Initialized drm 1.1.0 20060810
[    1.136534] drm/i810 does not support SMP
[    1.136680] [drm:i915_init] *ERROR* drm/i915 can’t work without intel_agp module!
[    1.137822] brd: module loaded
[    1.138461] loop: module loaded
[    1.138739] ata_piix 0000:00:1f.2: version 2.13
[    1.138748] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.138907] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    1.139393] ata_piix 0000:00:1f.2: SCR access via SIDPR is available but doesn’t work
[    1.139628] ata_piix 0000:00:1f.2: setting latency timer to 64
[    1.139846] scsi0 : ata_piix
[    1.140040] scsi1 : ata_piix
[    1.140765] ata1: SATA max UDMA/133 cmd 0xf0d0 ctl 0xf0c0 bmdma 0xf090 irq 19
[    1.140921] ata2: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf098 irq 19
[    1.141096] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.141282] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[    1.141761] ata_piix 0000:00:1f.5: setting latency timer to 64
[    1.141927] scsi2 : ata_piix
[    1.142132] scsi3 : ata_piix
[    1.142801] ata3: SATA max UDMA/133 cmd 0xf070 ctl 0xf060 bmdma 0xf030 irq 19
[    1.142958] ata4: SATA max UDMA/133 cmd 0xf050 ctl 0xf040 bmdma 0xf038 irq 19
[    1.143244] pata_via 0000:03:00.0: version 0.3.4
[    1.143253] pata_via 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    1.143434] pata_via 0000:03:00.0: setting latency timer to 64
[    1.143650] scsi4 : pata_via
[    1.143839] scsi5 : pata_via
[    1.144142] ata5: PATA max UDMA/133 cmd 0xd040 ctl 0xd030 bmdma 0xd000 irq 17
[    1.144297] ata6: PATA max UDMA/133 cmd 0xd020 ctl 0xd010 bmdma 0xd008 irq 17
[    1.144565] ehci_hcd: USB 2.0 ‘Enhanced’ Host Controller (EHCI) Driver
[    1.144721] ehci_hcd: block sizes: qh 112 qtd 96 itd 192 sitd 96
[    1.144732] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.144901] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[    1.144904] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[    1.145061] drivers/usb/core/inode.c: creating file ‘devices'
[    1.145064] drivers/usb/core/inode.c: creating file ‘001‘
[    1.145102] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.145338] ehci_hcd 0000:00:1a.0: reset hcs_params 0x200002 dbg=2 cc=0 pcc=0 ordered !ppc ports=2
[    1.145342] ehci_hcd 0000:00:1a.0: reset hcc_params 36881 caching frame 1024 64 bit addr
[    1.145354] ehci_hcd 0000:00:1a.0: support lpm
[    1.145366] ehci_hcd 0000:00:1a.0: debug port 2
[    1.145516] ehci_hcd 0000:00:1a.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[    1.149404] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[    1.149406] ehci_hcd 0000:00:1a.0: supports USB remote wakeup
[    1.149418] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf6306000
[    1.149571] ehci_hcd 0000:00:1a.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[    1.153459] ehci_hcd 0000:00:1a.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
[    1.159105] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.159289] usb usb1: default language 0x0409
[    1.159292] usb usb1: udev 1, busnum 1, minor = 0
[    1.159294] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.159448] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.161154] usb usb1: Product: EHCI Host Controller
[    1.161302] usb usb1: Manufacturer: Linux 3.2.5-zen+ ehci_hcd
[    1.161453] usb usb1: SerialNumber: 0000:00:1a.0
[    1.161642] usb usb1: usb_probe_device
[    1.161643] usb usb1: configuration #1 chosen from 1 choice
[    1.161647] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[    1.161673] hub 1-0:1.0: usb_probe_interface
[    1.161674] hub 1-0:1.0: usb_probe_interface - got id
[    1.161675] hub 1-0:1.0: USB hub found
[    1.161822] hub 1-0:1.0: 2 ports detected
[    1.161968] hub 1-0:1.0: standalone hub
[    1.161969] hub 1-0:1.0: no power switching (usb 1.0)
[    1.161970] hub 1-0:1.0: individual port over-current protection
[    1.161971] hub 1-0:1.0: power on to power good time: 20ms
[    1.161973] hub 1-0:1.0: local power source is good
[    1.161975] hub 1-0:1.0: trying to enable port power on non-switchable hub
[    1.161988] drivers/usb/core/inode.c: creating file ‘001‘
[    1.162011] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.162198] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.162201] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[    1.162352] drivers/usb/core/inode.c: creating file ‘002‘
[    1.162379] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.162612] ehci_hcd 0000:00:1d.0: reset hcs_params 0x200002 dbg=2 cc=0 pcc=0 ordered !ppc ports=2
[    1.162615] ehci_hcd 0000:00:1d.0: reset hcc_params 36881 caching frame 1024 64 bit addr
[    1.162624] ehci_hcd 0000:00:1d.0: support lpm
[    1.162636] ehci_hcd 0000:00:1d.0: debug port 2
[    1.162786] ehci_hcd 0000:00:1d.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[    1.166676] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[    1.166677] ehci_hcd 0000:00:1d.0: supports USB remote wakeup
[    1.166687] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf6305000
[    1.166840] ehci_hcd 0000:00:1d.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[    1.170730] ehci_hcd 0000:00:1d.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
[    1.176095] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.176273] usb usb2: default language 0x0409
[    1.176276] usb usb2: udev 1, busnum 2, minor = 128
[    1.176278] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.176432] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.176660] usb usb2: Product: EHCI Host Controller
[    1.176808] usb usb2: Manufacturer: Linux 3.2.5-zen+ ehci_hcd
[    1.176959] usb usb2: SerialNumber: 0000:00:1d.0
[    1.177149] usb usb2: usb_probe_device
[    1.177151] usb usb2: configuration #1 chosen from 1 choice
[    1.177155] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[    1.177180] hub 2-0:1.0: usb_probe_interface
[    1.177181] hub 2-0:1.0: usb_probe_interface - got id
[    1.177183] hub 2-0:1.0: USB hub found
[    1.177329] hub 2-0:1.0: 2 ports detected
[    1.177474] hub 2-0:1.0: standalone hub
[    1.177475] hub 2-0:1.0: no power switching (usb 1.0)
[    1.177476] hub 2-0:1.0: individual port over-current protection
[    1.177478] hub 2-0:1.0: power on to power good time: 20ms
[    1.177480] hub 2-0:1.0: local power source is good
[    1.177481] hub 2-0:1.0: trying to enable port power on non-switchable hub
[    1.177493] drivers/usb/core/inode.c: creating file ‘001‘
[    1.177525] ohci_hcd: USB 1.1 ‘Open’ Host Controller (OHCI) Driver
[    1.177677] ohci_hcd: block sizes: ed 80 td 96
[    1.177698] uhci_hcd: USB Universal Host Controller Interface driver
[    1.177897] usbcore: registered new interface driver usblp
[    1.178047] Initializing USB Mass Storage driver...
[    1.178234] usbcore: registered new interface driver usb-storage
[    1.178386] USB Mass Storage support registered.
[    1.178555] usbcore: registered new interface driver libusual
[    1.178764] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    1.182049] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.182214] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.182401] mousedev: PS/2 mouse device common for all mice
[    1.182659] rtc_cmos 00:05: RTC can wake from S4
[    1.182892] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    1.183072] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.183254] i2c /dev entries driver
[    1.183416] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[    1.183619] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[    1.183884] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    1.184105] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    1.184367] device-mapper: dm-raid45: initialized v0.2597k
[    1.184760] cpuidle: using governor ladder
[    1.185380] cpuidle: using governor menu
[    1.185528] EFI Variables Facility v0.08 2004-May-17
[    1.186138] usbcore: registered new interface driver usbhid
[    1.186292] usbhid: USB HID core driver
[    1.186711] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    1.186986] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[    1.187009] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[    1.205250] snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    1.205480] hda_intel: Disabling MSI
[    1.205636] snd_hda_intel 0000:01:00.1: setting latency timer to 64
[    1.207207] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    1.261109] ehci_hcd 0000:00:1a.0: GetStatus port:1 status 001803 0  ACK POWER sig=j CSC CONNECT
[    1.261116] hub 1-0:1.0: port 1: status 0501 change 0001
[    1.277116] ehci_hcd 0000:00:1d.0: GetStatus port:1 status 001803 0  ACK POWER sig=j CSC CONNECT
[    1.277123] hub 2-0:1.0: port 1: status 0501 change 0001
[    1.299623] ata5.00: ATA-5: WDC WD200EB-00BHF0, 15.15M15, max UDMA/100
[    1.299787] ata5.00: 39102336 sectors, multi 16: LBA 
[    1.303659] ata2.01: NODEV after polling detection
[    1.306323] ata2.00: ATAPI: Optiarc DVD RW AD-7243S, 1.01, max UDMA/100
[    1.306610] ata5.00: configured for UDMA/100
[    1.312323] ata2.00: configured for UDMA/100
[    1.314698] scsi 1:0:0:0: CD-ROM            Optiarc  DVD RW AD-7243S  1.01 PQ: 0 ANSI: 5
[    1.317365] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.317608] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.317835] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.317914] sr 1:0:0:0: Attached scsi generic sg0 type 5
[    1.361106] hub 1-0:1.0: state 7 ports 2 chg 0002 evt 0000
[    1.361117] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
[    1.412352] ehci_hcd 0000:00:1a.0: port 1 high speed
[    1.412355] ehci_hcd 0000:00:1a.0: GetStatus port:1 status 001005 0  ACK POWER sig=se0 PE CONNECT
[    1.463107] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[    1.499098] HDMI status: Codec=0 Pin=5 Presence_Detect=0 ELD_Valid=0
[    1.508098] HDMI status: Codec=1 Pin=5 Presence_Detect=0 ELD_Valid=0
[    1.514349] ehci_hcd 0000:00:1a.0: port 1 high speed
[    1.514352] ehci_hcd 0000:00:1a.0: GetStatus port:1 status 001005 0  ACK POWER sig=se0 PE CONNECT
[    1.517098] HDMI status: Codec=2 Pin=5 Presence_Detect=0 ELD_Valid=0
[    1.526098] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[    1.529471] ALSA device list:
[    1.529618]   #0: HDA Intel PCH at 0xf6300000 irq 45
[    1.529766]   #1: HDA NVidia at 0xf6080000 irq 17
[    1.529955] Netfilter messages via NETLINK v0.30.
[    1.530123] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    1.530376] ctnetlink v0.93: registering with nfnetlink.
[    1.530705] ip_tables: (C) 2000-2006 Netfilter Core Team
[    1.530873] TCP cubic registered
[    1.531130] NET: Registered protocol family 10
[    1.531510] NET: Registered protocol family 17
[    1.531663] Registering the dns_resolver key type
[    1.531886] PM: Hibernation image not present or could not be loaded.
[    1.531893] registered taskstats version 1
[    1.532365]   Magic number: 0:389:344
[    1.532525] tty tty61: hash matches
[    1.532693] console [netcon0] enabled
[    1.532838] netconsole: network logging started
[    1.577266] ehci_hcd 0000:00:1a.0: set dev address 2 for port 1
[    1.577273] ehci_hcd 0000:00:1a.0: LPM: no device attached
[    1.577518] usb 1-1: udev 2, busnum 1, minor = 1
[    1.577522] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    1.577688] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.577886] usb 1-1: usb_probe_device
[    1.577887] usb 1-1: configuration #1 chosen from 1 choice
[    1.577989] usb 1-1: adding 1-1:1.0 (config #1, interface 0)
[    1.578039] hub 1-1:1.0: usb_probe_interface
[    1.578041] hub 1-1:1.0: usb_probe_interface - got id
[    1.578043] hub 1-1:1.0: USB hub found
[    1.578390] hub 1-1:1.0: 6 ports detected
[    1.578548] hub 1-1:1.0: standalone hub
[    1.578550] hub 1-1:1.0: individual port power switching
[    1.578551] hub 1-1:1.0: individual port over-current protection
[    1.578552] hub 1-1:1.0: Single TT
[    1.578553] hub 1-1:1.0: TT requires at most 8 FS bit times (666 ns)
[    1.578554] hub 1-1:1.0: power on to power good time: 100ms
[    1.578765] hub 1-1:1.0: local power source is good
[    1.578770] hub 1-1:1.0: enabling power on all ports
[    1.579535] drivers/usb/core/inode.c: creating file ‘002‘
[    1.579556] hub 2-0:1.0: state 7 ports 2 chg 0002 evt 0000
[    1.579564] hub 2-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
[    1.599154] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.602543] ata3.00: ATA-8: WDC WD10EARX-00N0YB0, 51.0AB51, max UDMA/133
[    1.602706] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.606551] ata3.00: configured for UDMA/133
[    1.606748] scsi 2:0:0:0: Direct-Access     ATA      WDC WD10EARX-00N 51.0 PQ: 0 ANSI: 5
[    1.607102] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    1.607123] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    1.607498] sd 2:0:0:0: [sda] 4096-byte physical blocks
[    1.607666] sd 2:0:0:0: [sda] Write Protect is off
[    1.607817] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.607826] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn’t support DPO or FUA
[    1.630345] ehci_hcd 0000:00:1d.0: port 1 high speed
[    1.630348] ehci_hcd 0000:00:1d.0: GetStatus port:1 status 001005 0  ACK POWER sig=se0 PE CONNECT
[    1.679861] usb 1-1: link qh256-0001/ffff88011a271b00 start 1 [1/0 us]
[    1.681090] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[    1.696500]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 >
[    1.697047] sd 2:0:0:0: [sda] Attached SCSI disk
[    1.732341] ehci_hcd 0000:00:1d.0: port 1 high speed
[    1.732345] ehci_hcd 0000:00:1d.0: GetStatus port:1 status 001005 0  ACK POWER sig=se0 PE CONNECT
[    1.733095] Refined TSC clocksource calibration: 3292.520 MHz.
[    1.733259] Switching to clocksource tsc
[    1.795259] ehci_hcd 0000:00:1d.0: set dev address 2 for port 1
[    1.795266] ehci_hcd 0000:00:1d.0: LPM: no device attached
[    1.795512] usb 2-1: udev 2, busnum 2, minor = 129
[    1.795516] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.795681] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.795875] usb 2-1: usb_probe_device
[    1.795876] usb 2-1: configuration #1 chosen from 1 choice
[    1.795984] usb 2-1: adding 2-1:1.0 (config #1, interface 0)
[    1.796033] hub 2-1:1.0: usb_probe_interface
[    1.796035] hub 2-1:1.0: usb_probe_interface - got id
[    1.796038] hub 2-1:1.0: USB hub found
[    1.796254] hub 2-1:1.0: 8 ports detected
[    1.796405] hub 2-1:1.0: standalone hub
[    1.796406] hub 2-1:1.0: individual port power switching
[    1.796407] hub 2-1:1.0: individual port over-current protection
[    1.796408] hub 2-1:1.0: Single TT
[    1.796409] hub 2-1:1.0: TT requires at most 8 FS bit times (666 ns)
[    1.796410] hub 2-1:1.0: power on to power good time: 100ms
[    1.796631] hub 2-1:1.0: local power source is good
[    1.796635] hub 2-1:1.0: enabling power on all ports
[    1.797631] drivers/usb/core/inode.c: creating file ‘002‘
[    1.797655] hub 1-1:1.0: state 7 ports 6 chg 0000 evt 0000
[    1.898137] usb 2-1: link qh256-0001/ffff8801189b0e00 start 1 [1/0 us]
[    1.898150] hub 2-1:1.0: state 7 ports 8 chg 0000 evt 0000
[    1.911217] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3
[    2.151106] ata4: failed to resume link (SControl 0)
[    2.162530] ata4: SATA link down (SStatus 0 SControl 0)
[    2.162731] scsi 4:0:0:0: Direct-Access     ATA      WDC WD200EB-00BH 15.1 PQ: 0 ANSI: 5
[    2.163071] sd 4:0:0:0: [sdb] 39102336 512-byte logical blocks: (20.0 GB/18.6 GiB)
[    2.163095] sd 4:0:0:0: Attached scsi generic sg2 type 0
[    2.163537] sd 4:0:0:0: [sdb] Write Protect is off
[    2.163687] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    2.163695] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn’t support DPO or FUA
[    2.226601]  sdb: sdb1 sdb3
[    2.226602]  sdb3: <bsd:bad subpartition - ignored
[    2.226603]  sdb5 >
[    2.227249] sd 4:0:0:0: [sdb] Attached SCSI disk
[    2.314174] md: Waiting for all devices to be available before autodetect
[    2.314331] md: If you don’t use raid, use raid=noautodetect
[    2.314566] md: Autodetecting RAID arrays.
[    2.314713] md: Scanned 0 and added 0 devices.
[    2.314859] md: autorun ...
[    2.315001] md: ... autorun DONE.
[    2.315874] REISERFS (device sda9): found reiserfs format “3.6“ with standard journal
[    2.316120] REISERFS (device sda9): using ordered data mode
[    2.316271] reiserfs: using flush barriers
[    2.320266] REISERFS (device sda9): journal params: device sda9, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[    2.320803] REISERFS (device sda9): checking transaction log (sda9)
[    2.419935] REISERFS (device sda9): Using r5 hash to sort names
[    2.420115] VFS: Mounted root (reiserfs filesystem) readonly on device 8:9.
[    2.421002] Freeing unused kernel memory: 668k freed
[    2.421214] Write protecting the kernel read-only data: 14336k
[    2.424558] Freeing unused kernel memory: 1712k freed
[    2.427577] Freeing unused kernel memory: 1500k freed
[    2.427872] BFS CPU scheduler v0.416 by Con Kolivas.
[    3.092707] kbd_mode used greatest stack depth: 4608 bytes left
[    3.140466] loadkeys used greatest stack depth: 4096 bytes left
[    3.140693] init-early.sh used greatest stack depth: 3800 bytes left
[    3.445776] init.sh used greatest stack depth: 3672 bytes left
[    4.357607] udevd[1244]: starting version 171
[    5.031811] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    5.031828] r8169 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    5.031869] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    5.031903] r8169 0000:05:00.0: setting latency timer to 64
[    5.032052] r8169 0000:05:00.0: irq 46 for MSI/MSI-X
[    5.032333] r8169 0000:05:00.0: eth0: RTL8168evl/8111evl at 0xffffc9000581e000, 00:25:22:c3:cd:3a, XID 0c900800 IRQ 46
[    5.032335] r8169 0000:05:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    6.634025] Disabling lock debugging due to kernel taint
[    6.634030] nvidia: module license ‘NVIDIA’ taints kernel.
[    6.672905] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    6.672910] nvidia 0000:01:00.0: setting latency timer to 64
[    6.672914] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[    6.673041] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  295.20  Mon Feb  6 21:07:30 PST 2012
[    8.124636] reiserfs: enabling write barrier flush mode
[    9.436665] Adding 995992k swap on /dev/sda8.  Priority:-1 extents:1 across:995992k 
[    9.497252] dd used greatest stack depth: 3176 bytes left
[   11.012106] w83627ehf: Found NCT6776F chip at 0x290
[   11.275138] r8169 0000:05:00.0: eth0: unable to load firmware patch rtl_nic/rtl8168e-3.fw (-2)
[   11.285912] r8169 0000:05:00.0: eth0: link down
[   11.286156] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   12.909769] r8169 0000:05:00.0: eth0: link up
[   12.909963] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   23.518654] eth0: no IPv6 routers present
[   42.171464] aufs test_add:261:mount[2210]: uid/gid/perm /usr/portage 250/250/0755, 250/250/0750

modem spingowany

Kod:

jarski185@kompasek ~ $ sudo ifconfig eth0 192.168.1.4; sudo ifconfig eth0 up ; ping 192.168.1.4
PING 192.168.1.4 (192.168.1.4) 56(84) bytes of data.
64 bytes from 192.168.1.4: icmp_req=1 ttl=64 time=0.030 ms
64 bytes from 192.168.1.4: icmp_req=2 ttl=64 time=0.042 ms
64 bytes from 192.168.1.4: icmp_req=3 ttl=64 time=0.043 ms
64 bytes from 192.168.1.4: icmp_req=4 ttl=64 time=0.042 ms
64 bytes from 192.168.1.4: icmp_req=5 ttl=64 time=0.042 ms
64 bytes from 192.168.1.4: icmp_req=6 ttl=64 time=0.031 ms
^C
--- 192.168.1.4 ping statistics ---
6 packets transmitted, 6 received, 0% packet loss, time 4999ms
rtt min/avg/max/mdev = 0.030/0.038/0.043/0.007 ms

Ostatnio edytowany przez jarski185 (2012-02-15 19:42:05)

Offline

 

#16  2012-02-15 19:47:23

  NIC - Członek DUG

NIC
Członek DUG
Skąd: Wrocław
Zarejestrowany: 2006-12-25
Serwis

Re: dhcpcd pobiera adres 169.254......

Mamy go:

W Twoim dmesg:

Kod:

r8169 0000:05:00.0: eth0: unable to load firmware patch rtl_nic/rtl8168e-3.fw

Czyli nie masz tego pliku lub coś mu się stało:

Kod:

ls -all /lib/firmware/rtl_nic/rtl8168e-3.fw

Nie wiem który pakiet go instaluje, ale wystarczy chyba go przeinstalować.
Ja znam tylko taki nie-dystrybucyjny sposób:

Kod:

git clone git://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git
cd linux-firmware
cp -r rtl_nic/ /lib/firmware
# reboot

PS. apt-file /lib/firmware/rtl_nic/rtl8168e-3.fw #?

Ostatnio edytowany przez NIC (2012-02-15 19:51:09)


Stronka-dom: http://titek.victorygames.pl
Jabber: nic@jabster.pl
Hobby: kompilowanie Linuksa, Bluetooth
Dystrybucja: żadna, bliski krewny LFS, składak

Offline

 

#17  2012-02-15 19:57:59

  jarski185 - Członek DUG

jarski185
Członek DUG
Skąd: Warszawa
Zarejestrowany: 2010-01-19
Serwis

Re: dhcpcd pobiera adres 169.254......

Ten plik jest z pakietu http://packages.gentoo.org/package/net-misc/r8168?arches=linux
On mi się nigdy nie chciał zainstalować i działałem na sterowniku z jądra o wdzięcznej nazwie r8169.Próbowałem zainstalować go z portage ale bezskutecznie. Zaraz odpalam ten gitowy sposób. Kiedyś jak miałem system x86 to faktycznie korzystałem z tego sterownika bo ten z jądra działał jak chciał.

==========================================================================

NIC zadziałało:) Dzięki.

Ostatnio edytowany przez jarski185 (2012-02-15 20:58:31)

Offline

 

#18  2012-02-18 10:05:08

  jarski185 - Członek DUG

jarski185
Członek DUG
Skąd: Warszawa
Zarejestrowany: 2010-01-19
Serwis

Re: dhcpcd pobiera adres 169.254......

Znów mi się tak samo stało. Dmesg pokazuje brak sterownika do karty sieciowej. Co można zrobić poza ponownym zainstalowaniem sterownika sposobem NIC? Z czego problem może wynikać?

Offline

 

#19  2012-02-18 10:11:58

  ArnVaker - Kapelusznik

ArnVaker
Kapelusznik
Skąd: Midgard
Zarejestrowany: 2009-05-06

Re: dhcpcd pobiera adres 169.254......

Tak samo, czyli że firmware, który wrzuciłeś do katalogu /lib/firmware, zniknął? Znaczy nie ma go już tam?

Offline

 

#20  2012-02-18 10:24:33

  jarski185 - Członek DUG

jarski185
Członek DUG
Skąd: Warszawa
Zarejestrowany: 2010-01-19
Serwis

Re: dhcpcd pobiera adres 169.254......

Właśnie. Dokładnie.Sorry za lakoniczność ale już mi ręce opadły:(

Offline

 

#21  2012-02-19 15:50:25

  ArnVaker - Kapelusznik

ArnVaker
Kapelusznik
Skąd: Midgard
Zarejestrowany: 2009-05-06

Re: dhcpcd pobiera adres 169.254......

Żyła wodna? Pliki nie powinny tak sobie znikać. ;) Hmm, chyba że coś jednak robiłeś z tym w międzyczasie… Na przykład jakbyś zainstalował z portage jakiś pakiet, który zawiera te pliki, a potem go usunął, to te Twoje pliki mogłyby polecieć razem z nim. NIC?

Offline

 

#22  2012-02-19 16:09:48

  NIC - Członek DUG

NIC
Członek DUG
Skąd: Wrocław
Zarejestrowany: 2006-12-25
Serwis

Re: dhcpcd pobiera adres 169.254......

Tak. Pliki nie powinny znikać. W szczególności te z katalogu "/lib". Być może trzeba wrócić do źródeł (w sensie umysłowym), czyli zainstalować to co nigdy Ci się nie chciało:
http://sources.gentoo.org/cgi-bin/viewvc.cgi/gentoo … g?view=markup bo z tego wygląda że teraz winno się dać. Może coś Ci się w systemie zakleszczyło i sobie tak czyści. A cały katalog poleciał? Bo prawdopodobnie tylko potrzebujesz tego pliku "rtl_nic/rtl8168e-3.fw" i w tym katalogu powinno jeszcze troszkę ich być.

PS. Pobieżnie zaglądnąłem w kod kernela - ni widu ni słychu czegokolwiek co by mogło usunąć ten plik. Czy to musiało się stać w przestrzeni użytkownika.


Stronka-dom: http://titek.victorygames.pl
Jabber: nic@jabster.pl
Hobby: kompilowanie Linuksa, Bluetooth
Dystrybucja: żadna, bliski krewny LFS, składak

Offline

 

#23  2012-02-19 16:12:59

  jarski185 - Członek DUG

jarski185
Członek DUG
Skąd: Warszawa
Zarejestrowany: 2010-01-19
Serwis

Re: dhcpcd pobiera adres 169.254......

No już sam nie wiem. Straszne problemy są ze sterownikiem do tej karty. Teraz wszystko działa bo zrobiłem cp -r rtl_nic/ /lib/firmware Nie mam już sterownika w jądrze tylko ten sterownik co podpowiedział NIC. Będę obserwował.
To: http://packages.gentoo.org/package/net-misc/r8168?arches=linux i sterownik od NIC to są dwa różne prawda?

Ostatnio edytowany przez jarski185 (2012-02-19 16:14:41)

Offline

 

#24  2012-02-19 16:26:23

  ArnVaker - Kapelusznik

ArnVaker
Kapelusznik
Skąd: Midgard
Zarejestrowany: 2009-05-06

Re: dhcpcd pobiera adres 169.254......

Możesz wrzucić listę plików jakie instaluje tamten ebuild?

Offline

 

#25  2012-02-19 16:46:20

  jarski185 - Członek DUG

jarski185
Członek DUG
Skąd: Warszawa
Zarejestrowany: 2010-01-19
Serwis

Re: dhcpcd pobiera adres 169.254......

Mam:

Kod:

jarski185@kompasek ~ $ equery files r8168
 * Searching for r8168 ...
 * Contents of net-misc/r8168-8.028.00:
/lib
/lib/modules
/lib/modules/3.2.5-zen+
/lib/modules/3.2.5-zen+/net
/lib/modules/3.2.5-zen+/net/r8168.ko
/usr

Ostatnio edytowany przez jarski185 (2012-02-19 16:46:52)

Offline

 

Stopka forum

Powered by PunBB
© Copyright 2002–2005 Rickard Andersson
Możesz wyłączyć AdBlock — tu nie ma reklam ;-)