Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!

Ogłoszenie

Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.

Strony: 1

 

#1  2011-08-21 12:15:12

  Jusko - Użytkownik

Jusko
Użytkownik
Zarejestrowany: 2009-07-09

Bluetooth nie może podłączyć się z telefonem choć go wykrywa.

Cześć.

Kiedyś działało, teraz po postawieniu testinga nie :-) Posiadam mały adapter bluetooth usb, można zobaczyć go tutaj:

http://pentagram.pl/produkty/sieci_i_komunikacja/ad … ompact_p_3010

System wykrywa go jako:

Kod:

Bus 001 Device 006: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)

Zainstalowałem blueza i gnome-bluetooth, wydaje się wszystko co jest potrzebne, bluetooth-applet sprawnie odnajduje telefon, jednak gdy chcę przeglądać pliki na urządzeniu mam w konsoli komunikat:

Kod:

Failed to mount OBEX volume: Connection refused

Niby w sieci idzie na to napotkać, jednak na razie rozwiązania nie znalazłem. Szkoda, bo postawiłem testinga i działa mi wszystko od strzału, nawet dobre parkowanie dysków o dziwo bez dłubania z hdparm. Mam chyba wszystko co potrzeba, doinstalowywałem nawet wiele z pakietów obexa być może niepotrzebnych:

Kod:

:~$ dpkg -l | grep blue
ii  bluetooth                                         4.94-3                            Bluetooth support
ii  bluez                                             4.94-3                            Bluetooth tools and daemons
ii  bluez-alsa                                        4.94-3                            Bluetooth ALSA support
ii  bluez-cups                                        4.94-3                            Bluetooth printer driver for CUPS
ii  bluez-firmware                                    1.2-2                             Firmware for Bluetooth devices
ii  bluez-gstreamer                                   4.94-3                            Bluetooth GStreamer support
ii  bluez-hcidump                                     2.1-1                             Analyses Bluetooth HCI packets
ii  bluez-tools                                       0.1.38+git662e-2                  A set of tools to manage Bluetooth devices for linux
ii  bluez-utils                                       4.94-3                            Transitional package
ii  gnome-bluetooth                                   2.30.0-3                          GNOME Bluetooth tools
ii  libbluetooth3                                     4.94-3                            Library to use the BlueZ Linux Bluetooth stack
ii  libgnome-bluetooth7                               2.30.0-3                          GNOME Bluetooth tools - support library
ii  libnet-bluetooth-perl                             0.40-2+b3                         Perl Bluetooth interface
ii  libpam-blue                                       0.9.0-3                           PAM module for local authenticaction with bluetooth devices
ii  python-bluez                                      0.18-1+b2                         Python wrappers around BlueZ for rapid bluetooth development
ii  python-lightblue                                  0.3.2-1+b3                        cross-platform Bluetooth API for Python

Kod:

:~$ dpkg -l | grep obex
ii  libmulticobex1                                    0.23-1+b2                         multi-protocol cable OBEX library
ii  libobexftp0                                       0.23-1+b2                         object exchange file transfer library
ii  libopenobex1                                      1.5-2                             OBEX protocol library
ii  obex-data-server                                  0.4.5-1+b2                        D-Bus service for OBEX client and server side functionality
ii  obexd-client                                      0.41-1                            D-Bus OBEX client
ii  obexfs                                            0.11-1                            mount filesystem of ObexFTP capable devices
ii  obexftp                                           0.23-1+b2                         file transfer utility for devices that use the OBEX protocol
ii  obexpushd                                         0.11.2-1                          program for receiving files via Bluetooth or IRDA
ii  python-obexftp                                    0.23-1+b2                         Python binding to the object exchange file transfer library

Aktualny testing na jajku 3.0.0-1-686-pae (nie wiem, czemu wprowadzili te pae miast normalnego jajka). W drugą stronę czyli przesłanie z komputera na telefon również nie działa - w konsoli bez logu, bluetooth-applet wyrzuca natomiast: Unable to find service record.

Ostatnio edytowany przez Jusko (2011-08-21 12:18:05)

Offline

 

#2  2011-08-21 12:27:05

  ilin - Palacz

ilin
Palacz
Skąd: PRLu
Zarejestrowany: 2006-05-03

Re: Bluetooth nie może podłączyć się z telefonem choć go wykrywa.

Spróbuj cofnąć wersję bluez

Kod:

/home/ilin# dpkg -l bluez
Desired=Unknown/Install/Remove/Purge/Hold
| Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend
|/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)
||/ Nazwa          Wersja         Opis
+++-==============-==============-============================================
ii  bluez          4.69-0ubuntu2  Bluetooth tools and daemons

Ja mam akurat od ubuntu ale ta od Squeeze też działa.

Problemy rozwiązujemy na forum nie na PW -> Niech inni na tym skorzystają.
Polski portal Debiana

Offline

 

#3  2011-08-21 13:09:26

  Andrzej66 - Użytkownik

Andrzej66
Użytkownik
Skąd: Elbląg
Zarejestrowany: 2009-08-26

Re: Bluetooth nie może podłączyć się z telefonem choć go wykrywa.

Wczoraj walczyłem w squeeze z bluetoothem

Bus 002 Device 002: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)

Działał w jedną stronę od kompa do telefonu. Problem rozwiązałem odinstalowując i na nowo instalując.

Install: bluez-alsa:i386 (4.66-3, automatic), libvpx-dev:i386 (0.9.1-2), blueman:i386 (1.21-4.1), bluez-gstreamer:i386 (4.66-3, automatic), bluemon:i386 (1.4-6), bluetooth:i386 (4.66-3), libx264-116:i386 (0.116.2037+gitf8ebd4a-3~bpo60+1), gnome-bluetooth:i386 (2.30.0-2), bluez-cups:i386 (4.66-3, automatic)
End-Date: 2011-08-20  23:52:01

Teraz gra jak należy., czyli od i do telefonu.
Pozdrawiam

Ostatnio edytowany przez Andrzej66 (2011-08-21 13:10:23)

Offline

 

#4  2011-08-21 14:44:10

  Jusko - Użytkownik

Jusko
Użytkownik
Zarejestrowany: 2009-07-09

Re: Bluetooth nie może podłączyć się z telefonem choć go wykrywa.

Problem chyba sięga głębiej - brak komunikacji z telefonem. Komputer wykrywa telefon, telefon komputer, ale nie można ustanowić komunikacji w żadną stronę - przekroczone czasy połączenia lub: Failed to mount OBEX volume: Połączenie z urządzeniem utracone. Po przeinstalowaniu pakietów komunikacja jakaś była - tj, sprawdzane były piny przy sparowaniu urządzeń, ale jakoś potwierdzenia nie były akceptowane. Po uruchomieniu ponownym komputera - cisza. Czy to nieco dziwne, że w dmesgu nie ma ani wzmianki o bluetooth? Jakiś czas temu była mowa, że w jakimś z jajek serii 2.6.3x nie działały bluetoothy - może teraz jest analogicznie (dlatego też Linux średnio nadawałby się jako komercyjny system ;-) )

Ostatnio edytowany przez Jusko (2011-08-21 14:48:29)

Offline

 

#5  2011-08-21 14:46:22

  ilin - Palacz

ilin
Palacz
Skąd: PRLu
Zarejestrowany: 2006-05-03

Re: Bluetooth nie może podłączyć się z telefonem choć go wykrywa.

Cofnąłeś ten bluez ?

Problemy rozwiązujemy na forum nie na PW -> Niech inni na tym skorzystają.
Polski portal Debiana

Offline

 

#6  2011-08-21 14:48:46

  Jusko - Użytkownik

Jusko
Użytkownik
Zarejestrowany: 2009-07-09

Re: Bluetooth nie może podłączyć się z telefonem choć go wykrywa.

Tak, ale nic to nie dawało - tj, w ogóle nie widziało telefonu, nie dawał się uruchomić poprzez bluemana bluetooth (ciągle system twierdził, że nieaktywny jest). Mój dongle nie jest egzotyczy - działał zawsze i od zawsze gdy go miałem. To pierwszy taki problem z nim.

Ostatnio edytowany przez Jusko (2011-08-21 14:50:14)

Offline

 

#7  2011-08-21 14:52:08

  ilin - Palacz

ilin
Palacz
Skąd: PRLu
Zarejestrowany: 2006-05-03

Re: Bluetooth nie może podłączyć się z telefonem choć go wykrywa.

http://forum.dug.net.pl/viewtopic.php?id=19196

Tu walczyłem z tym.

Potem doszedłem ,że wytarczy bluez cofnąć i wsio gada.

Być może u ciebie jest inna sytuacja.

Problemy rozwiązujemy na forum nie na PW -> Niech inni na tym skorzystają.
Polski portal Debiana

Offline

 

#8  2011-08-21 15:10:44

  NIC - Członek DUG

NIC
Członek DUG
Skąd: Wrocław
Zarejestrowany: 2006-12-25
Serwis

Re: Bluetooth nie może podłączyć się z telefonem choć go wykrywa.

Jeśli chcesz by rozwiązać problem to potrzeba:

Kod:

dmesg
bluetoothd --version
hciconfig -a
dmesg > dmesg.log

I przed łączeniem z urządzeniem odpalenie logów:

Kod:

hcidump -tVX > hcidump.log

lub lepiej

Kod:

hcidump -w hcidump.dump

Zapisze loga do pliku binarnego, trzeba by załączyć w załączniku

Jeszcze logi z bluetoothd by się przydały... Może gdzieś w /var/log je zapisuje... (nie wiem, bo nie używam systemowego logowania) Jeśli nie to wystarczy zabić proces bluetoothd i uruchomić go "bluetoothd -d -n > bluetoothd.log"

Opcjonalnie:
hcitool scan
sdptool records $adres_urządzenia > sdptool_remote.log
sdptool records local > sdptool_local.log

Z tego co mi wiadomo cofnięcie bluez do starszej wersji pomaga. W każdym bądź razie ja mam wersję: 4.89 i działa mi bez problemu z telefonami Sony Ericsson (z notebookiem HP też łączyło ładnie)

PS. Proponuję przykleić gdzieś by lud wiedział, że takich logów potrzeba by rozwikłać problemy z bluetoothem.

Stronka-dom: http://titek.victorygames.pl
Jabber: nic@jabster.pl
Hobby: kompilowanie Linuksa, Bluetooth
Dystrybucja: żadna, bliski krewny LFS, składak

Offline

 

#9  2011-08-21 18:25:32

  ilin - Palacz

ilin
Palacz
Skąd: PRLu
Zarejestrowany: 2006-05-03

Re: Bluetooth nie może podłączyć się z telefonem choć go wykrywa.

NIC Napisz nowy post w którym  wyszczególnisz jakie informacje podać w tematyce bluetooth.

Przykleimy i zamkniemy. :)

Problemy rozwiązujemy na forum nie na PW -> Niech inni na tym skorzystają.
Polski portal Debiana

Offline

 

#10  2011-08-22 12:40:23

  Jusko - Użytkownik

Jusko
Użytkownik
Zarejestrowany: 2009-07-09

Re: Bluetooth nie może podłączyć się z telefonem choć go wykrywa.

Mam bluez w wersji ze stable'a. O dziwo gdy chcę dodać swój telefon to komunikują się ze sobą jeżeli idzie o autentyfikacje kodu PIN - dalej jednak nici (tj. przesyłanie). Niestety wszystkich poleceń NIC nie mogę wykonać, gdyż pisze mi o ich braku. Anyway - od początku. Na bluezie ze stabla mam coś takiego, od razu po odpaleniu:


Kod:

:~$ bluetooth-applet 

** (bluetooth-applet:5659): WARNING **: Could not open RFKILL control device, please verify your installation

Ale od początku:

Dmesg:

Kod:

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.0.0-1-686-pae (Debian 3.0.0-1) (ben@decadent.org.uk) (gcc version 4.5.3 (Debian 4.5.3-3) ) #1 SMP Sun Jul 24 14:27:32 UTC 2011
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000001ffd0000 (usable)
[    0.000000]  BIOS-e820: 000000001ffd0000 - 000000001fff0c00 (reserved)
[    0.000000]  BIOS-e820: 000000001fff0c00 - 000000001fffc000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000001fffc000 - 0000000020000000 (reserved)
[    0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[    0.000000] DMI 2.3 present.
[    0.000000] DMI: Compaq  Evo N610c (DD502A#AK8)              /07F4, BIOS 68P4F Ver. F.1B 05/27/2004
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] last_pfn = 0x1ffd0 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-D3FFF write-protect
[    0.000000]   D4000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask FE0000000 write-back
[    0.000000]   1 disabled
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] initial memory mapped : 0 - 01a00000
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] init_memory_mapping: 0000000000000000-000000001ffd0000
[    0.000000]  0000000000 - 0000200000 page 4k
[    0.000000]  0000200000 - 001fe00000 page 2M
[    0.000000]  001fe00000 - 001ffd0000 page 4k
[    0.000000] kernel direct mapping tables up to 1ffd0000 @ 19fa000-1a00000
[    0.000000] RAMDISK: 1edc7000 - 1f732000
[    0.000000] ACPI: RSDP 000f6a80 00014 (v00 COMPAQ)
[    0.000000] ACPI: RSDT 1fff0c84 0002C (v01 COMPAQ CPQ00B7  27050420 CPQ  00000001)
[    0.000000] ACPI: FACP 1fff0c00 00084 (v02 COMPAQ CPQ00B7  00000002 CPQ  00000001)
[    0.000000] ACPI: DSDT 1fff0cb0 06DBC (v01 COMPAQ EVON610C 00010000 MSFT 0100000E)
[    0.000000] ACPI: FACS 1fffbe80 00040
[    0.000000] ACPI: SSDT 1fff7a6c 0010E (v01 COMPAQ  CPQGysr 00001001 MSFT 0100000E)
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 511MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 1ffd0000
[    0.000000]   low ram: 0 - 1ffd0000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x0001ffd0
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0001ffd0
[    0.000000] On node 0 totalpages: 130911
[    0.000000] free_area_init_node: node 0, pgdat c141c980, node_mem_map dfbcf200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3951 pages, LIFO batch:0
[    0.000000]   Normal zone: 992 pages used for memmap
[    0.000000]   Normal zone: 125936 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[    0.000000] APIC: disable apic facility
[    0.000000] APIC: switched to apic NOOP
[    0.000000] nr_irqs_gsi: 16
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 20000000 (gap: 20000000:e0000000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] PERCPU: Embedded 13 pages/cpu @df800000 s28864 r0 d24384 u2097152
[    0.000000] pcpu-alloc: s28864 r0 d24384 u2097152 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 129887
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-1-686-pae root=UUID=942fd0f7-65c7-4b5a-84ea-8428f504ad3a ro quiet
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (00000000:00000000)
[    0.000000] Memory: 504156k/524096k available (2764k kernel code, 19488k reserved, 1474k data, 404k init, 0k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xffd36000 - 0xfffff000   (2852 kB)
[    0.000000]     pkmap   : 0xffa00000 - 0xffc00000   (2048 kB)
[    0.000000]     vmalloc : 0xe07d0000 - 0xff9fe000   ( 498 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xdffd0000   ( 511 MB)
[    0.000000]       .init : 0xc1424000 - 0xc1489000   ( 404 kB)
[    0.000000]       .data : 0xc12b326c - 0xc1423b80   (1474 kB)
[    0.000000]       .text : 0xc1000000 - 0xc12b326c   (2764 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] Hierarchical RCU implementation.
[    0.000000]     RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:1280
[    0.000000] CPU 0 irqstacks, hard=de80c000 soft=de80e000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 1993.486 MHz processor.
[    0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 3986.97 BogoMIPS (lpj=7973944)
[    0.004014] pid_max: default: 32768 minimum: 301
[    0.004102] Security Framework initialized
[    0.004112] SELinux:  Disabled at boot.
[    0.004150] Mount-cache hash table entries: 512
[    0.004563] Initializing cgroup subsys cpuacct
[    0.004598] Initializing cgroup subsys memory
[    0.004625] Initializing cgroup subsys devices
[    0.004630] Initializing cgroup subsys freezer
[    0.004635] Initializing cgroup subsys net_cls
[    0.004640] Initializing cgroup subsys blkio
[    0.004703] CPU0: Hyper-Threading is disabled
[    0.004710] mce: CPU supports 4 MCE banks
[    0.004829] SMP alternatives: switching to UP code
[    0.013251] Freeing SMP alternatives: 8k freed
[    0.013260] ACPI: Core revision 20110413
[    0.018473] ACPI: setting ELCR to 0200 (from 0c00)
[    0.020138] weird, boot CPU (#0) not listed by the BIOS.
[    0.020143] SMP motherboard not detected.
[    0.020147] Local APIC not detected. Using dummy APIC emulation.
[    0.020151] SMP disabled
[    0.020155] Performance Events: Netburst events, 
[    0.020161] no APIC, boot with the "lapic" boot parameter to force-enable it.
[    0.020165] no hardware sampling interrupt available.
[    0.020173] Netburst P4/Xeon PMU driver.
[    0.020178] ... version:                0
[    0.020181] ... bit width:              40
[    0.020185] ... generic registers:      18
[    0.020189] ... value mask:             000000ffffffffff
[    0.020192] ... max period:             0000007fffffffff
[    0.020196] ... fixed-purpose events:   0
[    0.020199] ... event mask:             000000000003ffff
[    0.020574] NMI watchdog disabled (cpu0): not supported (no LAPIC?)
[    0.020607] Brought up 1 CPUs
[    0.020613] Total of 1 processors activated (3986.97 BogoMIPS).
[    0.020988] devtmpfs: initialized
[    0.021443] PM: Registering ACPI NVS region at 1fff0c00 (46080 bytes)
[    0.021795] print_constraints: dummy: 
[    0.021909] NET: Registered protocol family 16
[    0.022089] ACPI: bus type pci registered
[    0.024390] PCI: PCI BIOS revision 2.10 entry at 0xf03a2, last bus=4
[    0.024395] PCI: Using configuration type 1 for base access
[    0.025283] bio: create slab <bio-0> at 0
[    0.026945] ACPI: EC: Look up EC in DSDT
[    0.042195] ACPI: Interpreter enabled
[    0.042205] ACPI: (supports S0 S3 S4 S5)
[    0.042242] ACPI: Using PIC for interrupt routing
[    0.045755] ACPI: Power Resource [C15D] (on)
[    0.046837] ACPI: Power Resource [C171] (on)
[    0.048177] ACPI: Power Resource [C175] (on)
[    0.049223] ACPI: Power Resource [C178] (on)
[    0.049996] ACPI: Power Resource [C181] (on)
[    0.055248] ACPI: Power Resource [C1FC] (off)
[    0.055355] ACPI: Power Resource [C1FD] (off)
[    0.055460] ACPI: Power Resource [C1FE] (off)
[    0.055566] ACPI: Power Resource [C1FF] (off)
[    0.055676] ACPI: Power Resource [C200] (off)
[    0.056978] ACPI: No dock devices found.
[    0.056984] HEST: Table not found.
[    0.056992] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.061893] ACPI: PCI Root Bridge [C045] (domain 0000 [bus 00-ff])
[    0.071842] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
[    0.071849] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
[    0.071855] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[    0.071861] pci_root PNP0A03:00: host bridge window [mem 0x20000000-0xffffffff] (ignored)
[    0.071866] pci_root PNP0A03:00: host bridge window [mem 0x000d4000-0x000dffff] (ignored)
[    0.071896] pci 0000:00:00.0: [8086:1a30] type 0 class 0x000600
[    0.071910] pci 0000:00:00.0: reg 10: [mem 0x60000000-0x6fffffff pref]
[    0.071975] pci 0000:00:01.0: [8086:1a31] type 1 class 0x000604
[    0.072078] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[    0.072138] pci 0000:00:1f.0: [8086:248c] type 0 class 0x000601
[    0.072229] pci 0000:00:1f.0: quirk: [io  0x1000-0x107f] claimed by ICH4 ACPI/GPIO/TCO
[    0.072238] pci 0000:00:1f.0: quirk: [io  0x1100-0x113f] claimed by ICH4 GPIO
[    0.072263] pci 0000:00:1f.1: [8086:248a] type 0 class 0x000101
[    0.072285] pci 0000:00:1f.1: reg 10: [io  0x0000-0x0007]
[    0.072300] pci 0000:00:1f.1: reg 14: [io  0x0000-0x0003]
[    0.072314] pci 0000:00:1f.1: reg 18: [io  0x0000-0x0007]
[    0.072329] pci 0000:00:1f.1: reg 1c: [io  0x0000-0x0003]
[    0.072343] pci 0000:00:1f.1: reg 20: [io  0x4440-0x444f]
[    0.072358] pci 0000:00:1f.1: reg 24: [mem 0x00000000-0x000003ff]
[    0.072402] pci 0000:00:1f.5: [8086:2485] type 0 class 0x000401
[    0.072422] pci 0000:00:1f.5: reg 10: [io  0x4000-0x40ff]
[    0.072436] pci 0000:00:1f.5: reg 14: [io  0x4400-0x443f]
[    0.072533] pci 0000:01:00.0: [1002:4c57] type 0 class 0x000300
[    0.072556] pci 0000:01:00.0: reg 10: [mem 0x48000000-0x4fffffff pref]
[    0.072569] pci 0000:01:00.0: reg 14: [io  0x3000-0x30ff]
[    0.072582] pci 0000:01:00.0: reg 18: [mem 0x40400000-0x4040ffff]
[    0.072616] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[    0.072645] pci 0000:01:00.0: supports D1 D2
[    0.072692] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.072699] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    0.072706] pci 0000:00:01.0:   bridge window [mem 0x40400000-0x404fffff]
[    0.072713] pci 0000:00:01.0:   bridge window [mem 0x48000000-0x4fffffff pref]
[    0.072755] pci 0000:02:04.0: [11c1:0450] type 0 class 0x000780
[    0.072780] pci 0000:02:04.0: reg 10: [mem 0x40280000-0x402800ff]
[    0.072795] pci 0000:02:04.0: reg 14: [io  0x2440-0x2447]
[    0.072810] pci 0000:02:04.0: reg 18: [io  0x2000-0x20ff]
[    0.072875] pci 0000:02:04.0: supports D2
[    0.072879] pci 0000:02:04.0: PME# supported from D2 D3hot D3cold
[    0.072887] pci 0000:02:04.0: PME# disabled
[    0.072917] pci 0000:02:06.0: [104c:ac51] type 2 class 0x000607
[    0.072942] pci 0000:02:06.0: reg 10: [mem 0x40000000-0x40000fff]
[    0.072970] pci 0000:02:06.0: supports D1 D2
[    0.072974] pci 0000:02:06.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.072981] pci 0000:02:06.0: PME# disabled
[    0.073007] pci 0000:02:06.1: [104c:ac51] type 2 class 0x000607
[    0.073032] pci 0000:02:06.1: reg 10: [mem 0x40080000-0x40080fff]
[    0.073059] pci 0000:02:06.1: supports D1 D2
[    0.073063] pci 0000:02:06.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.073070] pci 0000:02:06.1: PME# disabled
[    0.073109] pci 0000:02:08.0: [8086:1038] type 0 class 0x000200
[    0.073132] pci 0000:02:08.0: reg 10: [mem 0x40100000-0x40100fff]
[    0.073147] pci 0000:02:08.0: reg 14: [io  0x2400-0x243f]
[    0.073218] pci 0000:02:08.0: supports D1 D2
[    0.073222] pci 0000:02:08.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.073230] pci 0000:02:08.0: PME# disabled
[    0.073262] pci 0000:02:0e.0: [1033:0035] type 0 class 0x000c03
[    0.073285] pci 0000:02:0e.0: reg 10: [mem 0x40180000-0x40180fff]
[    0.073365] pci 0000:02:0e.0: supports D1 D2
[    0.073370] pci 0000:02:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.073377] pci 0000:02:0e.0: PME# disabled
[    0.073403] pci 0000:02:0e.1: [1033:0035] type 0 class 0x000c03
[    0.073427] pci 0000:02:0e.1: reg 10: [mem 0x40200000-0x40200fff]
[    0.073508] pci 0000:02:0e.1: supports D1 D2
[    0.073512] pci 0000:02:0e.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.073519] pci 0000:02:0e.1: PME# disabled
[    0.073544] pci 0000:02:0e.2: [1033:00e0] type 0 class 0x000c03
[    0.073568] pci 0000:02:0e.2: reg 10: [mem 0x40300000-0x403000ff]
[    0.073649] pci 0000:02:0e.2: supports D1 D2
[    0.073653] pci 0000:02:0e.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.073660] pci 0000:02:0e.2: PME# disabled
[    0.073704] pci 0000:00:1e.0: PCI bridge to [bus 02-04] (subtractive decode)
[    0.073712] pci 0000:00:1e.0:   bridge window [io  0x2000-0x2fff]
[    0.073720] pci 0000:00:1e.0:   bridge window [mem 0x40000000-0x403fffff]
[    0.073728] pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.073734] pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
[    0.073740] pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
[    0.073832] pci_bus 0000:04: [bus 04-07] partially hidden behind transparent bridge 0000:02 [bus 02-04]
[    0.073851] pci_bus 0000:00: on NUMA node 0
[    0.073859] ACPI: PCI Interrupt Routing Table [\_SB_.C045._PRT]
[    0.073899] ACPI: PCI Interrupt Routing Table [\_SB_.C045.C046._PRT]
[    0.073937] ACPI: PCI Interrupt Routing Table [\_SB_.C045.C058._PRT]
[    0.074102]  pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
[    0.080685] ACPI: PCI Interrupt Link [C0C0] (IRQs 5 10 *11)
[    0.080850] ACPI: PCI Interrupt Link [C0C1] (IRQs 5 10 *11)
[    0.080997] ACPI: PCI Interrupt Link [C0C2] (IRQs 5 10 11) *0, disabled.
[    0.081159] ACPI: PCI Interrupt Link [C0C3] (IRQs 5 10 *11)
[    0.081321] ACPI: PCI Interrupt Link [C0C4] (IRQs 5 *10 11)
[    0.081468] ACPI: PCI Interrupt Link [C0C5] (IRQs) *0, disabled.
[    0.081615] ACPI: PCI Interrupt Link [C0C6] (IRQs) *0, disabled.
[    0.081760] ACPI: PCI Interrupt Link [C0C7] (IRQs) *0, disabled.
[    0.082006] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.082018] vgaarb: loaded
[    0.082021] vgaarb: bridge control possible 0000:01:00.0
[    0.082095] PCI: Using ACPI for IRQ routing
[    0.082103] PCI: pci_cache_line_size set to 64 bytes
[    0.082183] reserve RAM buffer: 000000000009fc00 - 000000000009ffff 
[    0.082189] reserve RAM buffer: 000000001ffd0000 - 000000001fffffff 
[    0.082440] Switching to clocksource pit
[    0.082524] pnp: PnP ACPI init
[    0.082558] ACPI: bus type pnp registered
[    0.082775] pnp 00:00: [mem 0x00000000-0x0009ffff]
[    0.082781] pnp 00:00: [mem 0x000e0000-0x000fffff]
[    0.082785] pnp 00:00: [mem 0x00100000-0x1fffffff]
[    0.082877] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.082885] system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.082892] system 00:00: [mem 0x00100000-0x1fffffff] could not be reserved
[    0.082899] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.087854] pnp 00:01: [bus 00-ff]
[    0.087860] pnp 00:01: [io  0x0cf8-0x0cff]
[    0.087864] pnp 00:01: [io  0x0000-0x0cf7 window]
[    0.087869] pnp 00:01: [io  0x0d00-0xffff window]
[    0.087874] pnp 00:01: [mem 0x000a0000-0x000bffff window]
[    0.087879] pnp 00:01: [mem 0x20000000-0xffffffff window]
[    0.087884] pnp 00:01: [mem 0x000d4000-0x000dffff window]
[    0.088017] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active)
[    0.089302] pnp 00:02: [io  0x03f8-0x03ff]
[    0.089311] pnp 00:02: [irq 4]
[    0.089429] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active)
[    0.090842] pnp 00:03: [io  0x03f0-0x03f5]
[    0.090847] pnp 00:03: [io  0x03f7]
[    0.090852] pnp 00:03: [irq 6]
[    0.090856] pnp 00:03: [dma 2]
[    0.090951] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.092689] pnp 00:04: [io  0x03e8-0x03ef]
[    0.092695] pnp 00:04: [io  0x0100-0x0107]
[    0.092699] pnp 00:04: [irq 3]
[    0.092703] pnp 00:04: [dma 1]
[    0.092848] pnp 00:04: Plug and Play ACPI device, IDs SMCf010 PNP0511 (active)
[    0.094251] pnp 00:05: [io  0x0378-0x037f]
[    0.094257] pnp 00:05: [io  0x0778-0x077a]
[    0.094262] pnp 00:05: [irq 7]
[    0.094266] pnp 00:05: [dma 3]
[    0.094440] pnp 00:05: Plug and Play ACPI device, IDs PNP0401 (active)
[    0.094463] pnp 00:06: [io  0x00f0-0x00ff]
[    0.094469] pnp 00:06: [irq 13]
[    0.094521] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.094546] pnp 00:07: [io  0x0000-0x000f]
[    0.094551] pnp 00:07: [io  0x0080-0x008f]
[    0.094555] pnp 00:07: [io  0x00c0-0x00df]
[    0.094559] pnp 00:07: [dma 4]
[    0.094615] pnp 00:07: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.094635] pnp 00:08: [io  0x0061]
[    0.094689] pnp 00:08: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.094710] pnp 00:09: [io  0x0070-0x0071]
[    0.094714] pnp 00:09: [io  0x0072-0x0073]
[    0.094719] pnp 00:09: [irq 8]
[    0.094777] pnp 00:09: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.094798] pnp 00:0a: [io  0x0060]
[    0.094804] pnp 00:0a: [io  0x0064]
[    0.094808] pnp 00:0a: [irq 1]
[    0.094864] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.094885] pnp 00:0b: [irq 12]
[    0.094945] pnp 00:0b: Plug and Play ACPI device, IDs SYN0100 PNP0f13 (active)
[    0.095037] pnp 00:0c: [io  0x0010-0x001f]
[    0.095042] pnp 00:0c: [io  0x0024-0x003d]
[    0.095046] pnp 00:0c: [io  0x004e-0x004f]
[    0.095051] pnp 00:0c: [io  0x0050-0x0053]
[    0.095054] pnp 00:0c: [io  0x0074-0x0077]
[    0.095059] pnp 00:0c: [io  0x0090-0x009f]
[    0.095063] pnp 00:0c: [io  0x00a4-0x00bd]
[    0.095067] pnp 00:0c: [io  0x0140-0x014f]
[    0.095071] pnp 00:0c: [mem 0xffb00000-0xffbfffff]
[    0.095076] pnp 00:0c: [mem 0xfff00000-0xffffffff]
[    0.095170] system 00:0c: [io  0x0140-0x014f] has been reserved
[    0.095177] system 00:0c: [mem 0xffb00000-0xffbfffff] has been reserved
[    0.095183] system 00:0c: [mem 0xfff00000-0xffffffff] has been reserved
[    0.095190] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.095729] pnp 00:0d: [io  0x04d0-0x04d1]
[    0.095734] pnp 00:0d: [io  0x1000-0x107f]
[    0.095738] pnp 00:0d: [io  0x1100-0x113f]
[    0.095742] pnp 00:0d: [io  0x1200-0x121f]
[    0.095747] pnp 00:0d: [mem 0xffc00000-0xffc003ff]
[    0.095838] system 00:0d: [io  0x04d0-0x04d1] has been reserved
[    0.095846] system 00:0d: [io  0x1000-0x107f] has been reserved
[    0.095851] system 00:0d: [io  0x1100-0x113f] has been reserved
[    0.095857] system 00:0d: [io  0x1200-0x121f] has been reserved
[    0.095863] system 00:0d: [mem 0xffc00000-0xffc003ff] has been reserved
[    0.095869] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.096511] pnp 00:0e: [mem 0x000d1800-0x000d3fff]
[    0.096608] system 00:0e: [mem 0x000d1800-0x000d3fff] has been reserved
[    0.096615] system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.096642] pnp: PnP ACPI: found 15 devices
[    0.096646] ACPI: ACPI bus type pnp unregistered
[    0.096653] PnPBIOS: Disabled by ACPI PNP
[    0.134508] Switching to clocksource acpi_pm
[    0.134551] PCI: max bus depth: 2 pci_try_num: 3
[    0.134593] pci 0000:00:1e.0: BAR 15: assigned [mem 0x20000000-0x27ffffff pref]
[    0.134602] pci 0000:00:1f.1: BAR 5: assigned [mem 0x28000000-0x280003ff]
[    0.134613] pci 0000:00:1f.1: BAR 5: set to [mem 0x28000000-0x280003ff] (PCI address [0x28000000-0x280003ff])
[    0.134623] pci 0000:01:00.0: BAR 6: assigned [mem 0x40420000-0x4043ffff pref]
[    0.134628] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.134634] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    0.134642] pci 0000:00:01.0:   bridge window [mem 0x40400000-0x404fffff]
[    0.134649] pci 0000:00:01.0:   bridge window [mem 0x48000000-0x4fffffff pref]
[    0.134662] pci 0000:02:06.0: BAR 15: assigned [mem 0x20000000-0x23ffffff pref]
[    0.134673] pci 0000:02:06.0: BAR 16: assigned [mem 0x2c000000-0x2fffffff]
[    0.134679] pci 0000:02:06.1: BAR 15: assigned [mem 0x24000000-0x27ffffff pref]
[    0.134689] pci 0000:02:06.1: BAR 16: assigned [mem 0x30000000-0x33ffffff]
[    0.134695] pci 0000:02:06.0: BAR 13: assigned [io  0x2800-0x28ff]
[    0.134701] pci 0000:02:06.0: BAR 14: assigned [io  0x2c00-0x2cff]
[    0.134710] pci 0000:02:06.1: BAR 13: assigned [io  0x1400-0x14ff]
[    0.134717] pci 0000:02:06.1: BAR 14: assigned [io  0x1800-0x18ff]
[    0.134723] pci 0000:02:06.0: CardBus bridge to [bus 03-03]
[    0.134728] pci 0000:02:06.0:   bridge window [io  0x2800-0x28ff]
[    0.134735] pci 0000:02:06.0:   bridge window [io  0x2c00-0x2cff]
[    0.134743] pci 0000:02:06.0:   bridge window [mem 0x20000000-0x23ffffff pref]
[    0.134751] pci 0000:02:06.0:   bridge window [mem 0x2c000000-0x2fffffff]
[    0.134758] pci 0000:02:06.1: CardBus bridge to [bus 04-07]
[    0.134763] pci 0000:02:06.1:   bridge window [io  0x1400-0x14ff]
[    0.134772] pci 0000:02:06.1:   bridge window [io  0x1800-0x18ff]
[    0.134780] pci 0000:02:06.1:   bridge window [mem 0x24000000-0x27ffffff pref]
[    0.134787] pci 0000:02:06.1:   bridge window [mem 0x30000000-0x33ffffff]
[    0.134795] pci 0000:00:1e.0: PCI bridge to [bus 02-04]
[    0.134801] pci 0000:00:1e.0:   bridge window [io  0x2000-0x2fff]
[    0.134810] pci 0000:00:1e.0:   bridge window [mem 0x40000000-0x403fffff]
[    0.134818] pci 0000:00:1e.0:   bridge window [mem 0x20000000-0x27ffffff pref]
[    0.134846] pci 0000:00:1e.0: setting latency timer to 64
[    0.135126] ACPI: PCI Interrupt Link [C0C3] enabled at IRQ 11
[    0.135133] PCI: setting IRQ 11 as level-triggered
[    0.135141] pci 0000:02:06.0: PCI INT A -> Link[C0C3] -> GSI 11 (level, low) -> IRQ 11
[    0.135157] pci 0000:02:06.1: PCI INT A -> Link[C0C3] -> GSI 11 (level, low) -> IRQ 11
[    0.135168] pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
[    0.135173] pci_bus 0000:00: resource 1 [mem 0x00000000-0xfffffffff]
[    0.135178] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
[    0.135183] pci_bus 0000:01: resource 1 [mem 0x40400000-0x404fffff]
[    0.135189] pci_bus 0000:01: resource 2 [mem 0x48000000-0x4fffffff pref]
[    0.135194] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    0.135199] pci_bus 0000:02: resource 1 [mem 0x40000000-0x403fffff]
[    0.135204] pci_bus 0000:02: resource 2 [mem 0x20000000-0x27ffffff pref]
[    0.135209] pci_bus 0000:02: resource 4 [io  0x0000-0xffff]
[    0.135214] pci_bus 0000:02: resource 5 [mem 0x00000000-0xfffffffff]
[    0.135219] pci_bus 0000:03: resource 0 [io  0x2800-0x28ff]
[    0.135224] pci_bus 0000:03: resource 1 [io  0x2c00-0x2cff]
[    0.135229] pci_bus 0000:03: resource 2 [mem 0x20000000-0x23ffffff pref]
[    0.135234] pci_bus 0000:03: resource 3 [mem 0x2c000000-0x2fffffff]
[    0.135240] pci_bus 0000:04: resource 0 [io  0x1400-0x14ff]
[    0.135244] pci_bus 0000:04: resource 1 [io  0x1800-0x18ff]
[    0.135249] pci_bus 0000:04: resource 2 [mem 0x24000000-0x27ffffff pref]
[    0.135254] pci_bus 0000:04: resource 3 [mem 0x30000000-0x33ffffff]
[    0.135356] NET: Registered protocol family 2
[    0.135516] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.135910] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.136051] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[    0.136175] TCP: Hash tables configured (established 16384 bind 16384)
[    0.136180] TCP reno registered
[    0.136186] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.136197] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.136454] NET: Registered protocol family 1
[    0.136503] pci 0000:01:00.0: Boot video device
[    0.136558] pci 0000:02:08.0: Firmware left e100 interrupts enabled; disabling
[    0.136606] PCI: CLS 32 bytes, default 64
[    0.136717] Unpacking initramfs...
[    0.137592] Switched to NOHz mode on CPU #0
[    0.642925] Freeing initrd memory: 9644k freed
[    0.662337] audit: initializing netlink socket (disabled)
[    0.662370] type=2000 audit(1314006271.658:1): initialized
[    0.685231] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.685447] VFS: Disk quotas dquot_6.5.2
[    0.685557] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.685716] msgmni has been set to 1003
[    0.686010] alg: No test for stdrng (krng)
[    0.686065] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.686072] io scheduler noop registered
[    0.686075] io scheduler deadline registered
[    0.686092] io scheduler cfq registered (default)
[    0.686430] ERST: Table is not found!
[    0.686455] isapnp: Scanning for PnP cards...
[    1.039915] isapnp: No Plug & Play device found
[    1.040090] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.060490] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.080963] serial8250: ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A
[    1.101571] 00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.102025] Linux agpgart interface v0.103
[    1.102223] agpgart-intel 0000:00:00.0: Intel i845 Chipset
[    1.117042] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x60000000
[    1.117322] i8042: PNP: PS/2 Controller [PNP0303:C17E,PNP0f13:C17F] at 0x60,0x64 irq 1,12
[    1.118666] i8042: Detected active multiplexing controller, rev 1.1
[    1.119400] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.119419] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.119476] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.119524] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.119572] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.119785] mousedev: PS/2 mouse device common for all mice
[    1.119869] rtc_cmos 00:09: RTC can wake from S4
[    1.120065] rtc_cmos 00:09: rtc core: registered rtc_cmos as rtc0
[    1.120091] rtc0: alarms up to one month, y3k, 114 bytes nvram
[    1.120112] cpuidle: using governor ladder
[    1.120116] cpuidle: using governor menu
[    1.120644] TCP cubic registered
[    1.120685] NET: Registered protocol family 10
[    1.121733] Mobile IPv6
[    1.121739] NET: Registered protocol family 17
[    1.121748] Registering the dns_resolver key type
[    1.121792] Using IPI No-Shortcut mode
[    1.121978] PM: Hibernation image not present or could not be loaded.
[    1.121999] registered taskstats version 1
[    1.122370] rtc_cmos 00:09: setting system clock to 2011-08-22 09:44:32 UTC (1314006272)
[    1.122412] Initializing network drop monitor service
[    1.122588] Freeing unused kernel memory: 404k freed
[    1.123310] Write protecting the kernel text: 2768k
[    1.123362] Write protecting the kernel read-only data: 1068k
[    1.141135] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.153835] udevd[42]: starting version 172
[    1.324896] SCSI subsystem initialized
[    1.347801] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[    1.347808] e100: Copyright(c) 1999-2006 Intel Corporation
[    1.385402] ACPI: PCI Interrupt Link [C0C4] enabled at IRQ 10
[    1.385410] PCI: setting IRQ 10 as level-triggered
[    1.385423] e100 0000:02:08.0: PCI INT A -> Link[C0C4] -> GSI 10 (level, low) -> IRQ 10
[    1.481954] thermal LNXTHERM:00: registered as thermal_zone0
[    1.481961] ACPI: Thermal Zone [TZ1] (37 C)
[    1.482100] ACPI: Fan [C201] (off)
[    1.482206] ACPI: Fan [C202] (off)
[    1.482304] ACPI: Fan [C203] (off)
[    1.482396] ACPI: Fan [C204] (off)
[    1.482488] ACPI: Fan [C205] (off)
[    1.534000] libata version 3.00 loaded.
[    1.534838] ata_piix 0000:00:1f.1: version 2.13
[    1.534860] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
[    1.543385] ACPI: PCI Interrupt Link [C0C2] enabled at IRQ 11
[    1.543399] ata_piix 0000:00:1f.1: PCI INT A -> Link[C0C2] -> GSI 11 (level, low) -> IRQ 11
[    1.543498] ata_piix 0000:00:1f.1: setting latency timer to 64
[    1.544445] thermal LNXTHERM:01: registered as thermal_zone1
[    1.544451] ACPI: Thermal Zone [C1FA] (45 C)
[    1.545991] thermal LNXTHERM:02: registered as thermal_zone2
[    1.545997] ACPI: Thermal Zone [C1FB] (16 C)
[    1.547527] usbcore: registered new interface driver usbfs
[    1.547576] usbcore: registered new interface driver hub
[    1.553779] usbcore: registered new device driver usb
[    1.554994] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.565361] scsi0 : ata_piix
[    1.575938] scsi1 : ata_piix
[    1.577019] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x4440 irq 14
[    1.577026] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x4448 irq 15
[    1.587152] Floppy drive(s): fd0 is 1.44M
[    1.607754] FDC 0 is a post-1991 82077
[    1.671484] e100 0000:02:08.0: PME# disabled
[    1.672602] e100 0000:02:08.0: eth0: addr 0x40100000, irq 10, MAC addr 00:08:02:d4:6e:48
[    1.672660] ehci_hcd 0000:02:0e.2: PCI INT C -> Link[C0C4] -> GSI 10 (level, low) -> IRQ 10
[    1.672696] ehci_hcd 0000:02:0e.2: EHCI Host Controller
[    1.672764] ehci_hcd 0000:02:0e.2: new USB bus registered, assigned bus number 1
[    1.680047] Refined TSC clocksource calibration: 1993.531 MHz.
[    1.680059] Switching to clocksource tsc
[    1.696057] ehci_hcd 0000:02:0e.2: irq 10, io mem 0x40300000
[    1.708028] ehci_hcd 0000:02:0e.2: USB 2.0 started, EHCI 0.95
[    1.708078] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.708085] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.708090] usb usb1: Product: EHCI Host Controller
[    1.708095] usb usb1: Manufacturer: Linux 3.0.0-1-686-pae ehci_hcd
[    1.708099] usb usb1: SerialNumber: 0000:02:0e.2
[    1.708356] hub 1-0:1.0: USB hub found
[    1.708367] hub 1-0:1.0: 5 ports detected
[    1.736349] ata2.01: both IDENTIFYs aborted, assuming NODEV
[    1.740428] ata1.00: ATA-6: WDC WD400VE-00HDT0, 09.07D09, max UDMA/100
[    1.740435] ata1.00: 78140160 sectors, multi 16: LBA 
[    1.744307] ata2.00: ATAPI: Compaq  DVD-ROM GDR-8081N, 0013, max MWDMA2
[    1.748300] ata1.00: configured for UDMA/100
[    1.748516] scsi 0:0:0:0: Direct-Access     ATA      WDC WD400VE-00HD 09.0 PQ: 0 ANSI: 5
[    1.752112] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.752172] ohci_hcd 0000:02:0e.0: PCI INT A -> Link[C0C4] -> GSI 10 (level, low) -> IRQ 10
[    1.752203] ohci_hcd 0000:02:0e.0: OHCI Host Controller
[    1.752231] ohci_hcd 0000:02:0e.0: new USB bus registered, assigned bus number 2
[    1.752266] ohci_hcd 0000:02:0e.0: irq 10, io mem 0x40180000
[    1.760210] ata2.00: configured for MWDMA2
[    1.767616] scsi 1:0:0:0: CD-ROM            Compaq   DVD-ROM GDR8081N 0013 PQ: 0 ANSI: 5
[    1.787491] sd 0:0:0:0: [sda] 78140160 512-byte logical blocks: (40.0 GB/37.2 GiB)
[    1.787605] sd 0:0:0:0: [sda] Write Protect is off
[    1.787611] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.787786] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.792993] sr0: scsi3-mmc drive: 10x/24x cd/rw xa/form2 cdda tray
[    1.793002] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.793753] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.314464] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    2.314473] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.314479] usb usb2: Product: OHCI Host Controller
[    2.314483] usb usb2: Manufacturer: Linux 3.0.0-1-686-pae ohci_hcd
[    2.314488] usb usb2: SerialNumber: 0000:02:0e.0
[    2.314954] hub 2-0:1.0: USB hub found
[    2.314969] hub 2-0:1.0: 3 ports detected
[    2.315100] ohci_hcd 0000:02:0e.1: PCI INT B -> Link[C0C4] -> GSI 10 (level, low) -> IRQ 10
[    2.315147] ohci_hcd 0000:02:0e.1: OHCI Host Controller
[    2.315165] ohci_hcd 0000:02:0e.1: new USB bus registered, assigned bus number 3
[    2.315199] ohci_hcd 0000:02:0e.1: irq 10, io mem 0x40200000
[    2.874423]  sda: sda1 sda2 < sda5 sda6 >
[    2.875419] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.876356] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    2.876364] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.876369] usb usb3: Product: OHCI Host Controller
[    2.876374] usb usb3: Manufacturer: Linux 3.0.0-1-686-pae ohci_hcd
[    2.876378] usb usb3: SerialNumber: 0000:02:0e.1
[    2.876879] hub 3-0:1.0: USB hub found
[    2.876893] hub 3-0:1.0: 2 ports detected
[    2.888247] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.888390] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    2.984053] usb 1-1: new high speed USB device number 2 using ehci_hcd
[    3.116520] usb 1-1: New USB device found, idVendor=058f, idProduct=6254
[    3.116529] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.117660] hub 1-1:1.0: USB hub found
[    3.117870] hub 1-1:1.0: 4 ports detected
[    3.476048] usb 2-2: new low speed USB device number 2 using ohci_hcd
[    3.633748] PM: Starting manual resume from disk
[    3.633757] PM: Hibernation image partition 8:6 present
[    3.633761] PM: Looking for hibernation image.
[    3.634095] PM: Image not found (code -22)
[    3.634099] PM: Hibernation image not present or could not be loaded.
[    3.690130] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    3.690938] usb 2-2: New USB device found, idVendor=04f2, idProduct=0860
[    3.690945] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.690951] usb 2-2: Product: 2.4G Multimedia Wireless Kit
[    3.690956] usb 2-2: Manufacturer: Chicony
[    3.731453] input: Chicony 2.4G Multimedia Wireless Kit as /devices/pci0000:00/0000:00:1e.0/0000:02:0e.0/usb2/2-2/2-2:1.0/input/input1
[    3.731601] generic-usb 0003:04F2:0860.0001: input,hidraw0: USB HID v1.11 Keyboard [Chicony 2.4G Multimedia Wireless Kit] on usb-0000:02:0e.0-2/input0
[    3.745236] input: Chicony 2.4G Multimedia Wireless Kit as /devices/pci0000:00/0000:00:1e.0/0000:02:0e.0/usb2/2-2/2-2:1.1/input/input2
[    3.745477] generic-usb 0003:04F2:0860.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Chicony 2.4G Multimedia Wireless Kit] on usb-0000:02:0e.0-2/input1
[    3.745513] usbcore: registered new interface driver usbhid
[    3.745518] usbhid: USB HID core driver
[    3.780198] usb 1-1.2: new full speed USB device number 4 using ehci_hcd
[    3.911319] usb 1-1.2: New USB device found, idVendor=0a12, idProduct=0001
[    3.911328] usb 1-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    4.000180] usb 1-1.4: new high speed USB device number 5 using ehci_hcd
[    4.125531] usb 1-1.4: New USB device found, idVendor=148f, idProduct=2070
[    4.125540] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    4.125545] usb 1-1.4: Product: 802.11 g WLAN
[    4.125549] usb 1-1.4: Manufacturer: Ralink
[    4.125553] usb 1-1.4: SerialNumber: 1.0
[    5.385439] udevd[251]: starting version 172
[    6.144991] ACPI: acpi_idle registered with cpuidle
[    6.145098] Marking TSC unstable due to TSC halts in idle
[    6.164588] Switching to clocksource acpi_pm
[    6.176336] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[    6.176353] ACPI: Sleep Button [C19B]
[    6.176471] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
[    6.176589] ACPI: Lid Switch [C19C]
[    6.176709] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[    6.176718] ACPI: Power Button [PWRF]
[    6.186150] wmi: Mapper loaded
[    6.198106] ACPI: AC Adapter [C19A] (on-line)
[    6.218730] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/LNXVIDEO:00/input/input6
[    6.218747] ACPI: Video Device [C0CE] (multi-head: yes  rom: no  post: no)
[    6.362147] ACPI: Battery Slot [C198] (battery present)
[    6.362289] ACPI: Battery Slot [C199] (battery absent)
[    6.645847] input: PC Speaker as /devices/platform/pcspkr/input/input7
[    6.677560] NET: Registered protocol family 23
[    6.706936] found SMC SuperIO Chip (devid=0x0e rev=01 base=0x002e): LPC47N252
[    6.706962] smsc_ircc_present: can't get sir_base of 0x3e8
[    6.721205] parport_pc 00:05: reported by Plug and Play ACPI
[    6.721265] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[    6.873137] intel_rng: FWH not detected
[    7.048963] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    7.068149] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    7.182899] Synaptics Touchpad, model: 1, fw: 5.8, id: 0x9b48b1, caps: 0x884793/0x0/0x0
[    7.182912] serio: Synaptics pass-through port at isa0060/serio4/input0
[    7.237142] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8
[    7.288556] Bluetooth: Core ver 2.16
[    7.288614] NET: Registered protocol family 31
[    7.288618] Bluetooth: HCI device and connection manager initialized
[    7.288625] Bluetooth: HCI socket layer initialized
[    7.288630] Bluetooth: L2CAP socket layer initialized
[    7.289395] Bluetooth: SCO socket layer initialized
[    7.329084] Bluetooth: Generic Bluetooth USB driver ver 0.6
[    7.329404] usbcore: registered new interface driver btusb
[    7.452364] yenta_cardbus 0000:02:06.0: CardBus bridge found [0e11:00b7]
[    7.452390] yenta_cardbus 0000:02:06.0: Enabling burst memory read transactions
[    7.452399] yenta_cardbus 0000:02:06.0: Using CSCINT to route CSC interrupts to PCI
[    7.452404] yenta_cardbus 0000:02:06.0: Routing CardBus interrupts to PCI
[    7.452413] yenta_cardbus 0000:02:06.0: TI: mfunc 0x01001002, devctl 0x64
[    7.586957] [drm] Initialized drm 1.1.0 20060810
[    7.637283] ACPI: PCI Interrupt Link [C0C1] enabled at IRQ 11
[    7.637296] Intel ICH 0000:00:1f.5: PCI INT B -> Link[C0C1] -> GSI 11 (level, low) -> IRQ 11
[    7.637329] Intel ICH 0000:00:1f.5: setting latency timer to 64
[    7.684610] yenta_cardbus 0000:02:06.0: ISA IRQ mask 0x0038, PCI irq 11
[    7.684618] yenta_cardbus 0000:02:06.0: Socket status: 30000006
[    7.684635] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge window: [io  0x2000-0x2fff]
[    7.684643] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x2000-0x2fff: excluding 0x2000-0x20ff 0x2400-0x2447 0x2800-0x28ff 0x2c00-0x2cff
[    7.694944] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge window: [mem 0x40000000-0x403fffff]
[    7.694954] pcmcia_socket pcmcia_socket0: cs: memory probe 0x40000000-0x403fffff: excluding 0x40000000-0x4003ffff 0x40080000-0x400bffff 0x40100000-0x4013ffff 0x40180000-0x401bffff 0x40200000-0x4023ffff 0x40280000-0x402bffff 0x40300000-0x4033ffff
[    7.695000] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge window: [mem 0x20000000-0x27ffffff pref]
[    7.695011] pcmcia_socket pcmcia_socket0: cs: memory probe 0x20000000-0x27ffffff: excluding 0x20000000-0x27ffffff
[    7.695648] yenta_cardbus 0000:02:06.1: CardBus bridge found [0e11:00b7]
[    7.695675] yenta_cardbus 0000:02:06.1: Using CSCINT to route CSC interrupts to PCI
[    7.695680] yenta_cardbus 0000:02:06.1: Routing CardBus interrupts to PCI
[    7.695689] yenta_cardbus 0000:02:06.1: TI: mfunc 0x01001002, devctl 0x64
[    7.761636] [drm] radeon kernel modesetting enabled.
[    7.762026] ACPI: PCI Interrupt Link [C0C0] enabled at IRQ 11
[    7.762039] radeon 0000:01:00.0: PCI INT A -> Link[C0C0] -> GSI 11 (level, low) -> IRQ 11
[    7.762824] [drm] initializing kernel modesetting (RV200 0x1002:0x4C57).
[    7.762877] [drm] register mmio base: 0x40400000
[    7.762882] [drm] register mmio size: 65536
[    7.763399] agpgart-intel 0000:00:00.0: AGP 2.0 bridge
[    7.763423] agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode
[    7.763446] radeon 0000:01:00.0: putting AGP V2 device into 4x mode
[    7.763503] radeon 0000:01:00.0: GTT: 256M 0x60000000 - 0x6FFFFFFF
[    7.763515] radeon 0000:01:00.0: VRAM: 128M 0x0000000048000000 - 0x000000004FFFFFFF (32M used)
[    7.763531] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    7.763536] [drm] Driver supports precise vblank timestamp query.
[    7.763557] [drm] radeon: irq initialized.
[    7.763713] [drm] Detected VRAM RAM=128M, BAR=128M
[    7.763721] [drm] RAM width 64bits DDR
[    7.763843] [TTM] Zone  kernel: Available graphics memory: 257106 kiB.
[    7.763849] [TTM] Initializing pool allocator.
[    7.763899] [drm] radeon: 32M of VRAM memory ready
[    7.763905] [drm] radeon: 256M of GTT memory ready.
[    7.765875] radeon 0000:01:00.0: WB disabled
[    7.766860] [drm] Loading R100 Microcode
[    7.924598] yenta_cardbus 0000:02:06.1: ISA IRQ mask 0x0038, PCI irq 11
[    7.924606] yenta_cardbus 0000:02:06.1: Socket status: 30000006
[    7.924614] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #04 to #07
[    7.924635] yenta_cardbus 0000:02:06.1: pcmcia: parent PCI bridge window: [io  0x2000-0x2fff]
[    7.924643] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x2000-0x2fff: excluding 0x2000-0x20ff 0x2400-0x2447 0x2800-0x28ff 0x2c00-0x2cff
[    7.929964] yenta_cardbus 0000:02:06.1: pcmcia: parent PCI bridge window: [mem 0x40000000-0x403fffff]
[    7.929973] pcmcia_socket pcmcia_socket1: cs: memory probe 0x40000000-0x403fffff: excluding 0x40000000-0x4003ffff 0x40080000-0x400bffff 0x40100000-0x4013ffff 0x40180000-0x401bffff 0x40200000-0x4023ffff 0x40280000-0x402bffff 0x40300000-0x4033ffff
[    7.930018] yenta_cardbus 0000:02:06.1: pcmcia: parent PCI bridge window: [mem 0x20000000-0x27ffffff pref]
[    7.930024] pcmcia_socket pcmcia_socket1: cs: memory probe 0x20000000-0x27ffffff: excluding 0x20000000-0x27ffffff
[    8.159678] [drm] radeon: ring at 0x0000000060001000
[    8.159705] [drm] ring test succeeded in 1 usecs
[    8.161319] [drm] radeon: ib pool ready.
[    8.161458] [drm] ib test succeeded in 0 usecs
[    8.162403] [drm] Panel ID String: LCD LTM14C446
[    8.162407]           
[    8.162412] [drm] Panel Size 1024x768
[    8.173437] [drm] radeon legacy LVDS backlight initialized
[    8.176404] [drm] No TV DAC info found in BIOS
[    8.176570] [drm] Radeon Display Connectors
[    8.176574] [drm] Connector 0:
[    8.176578] [drm]   VGA
[    8.176582] [drm]   DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[    8.176586] [drm]   Encoders:
[    8.176590] [drm]     CRT1: INTERNAL_DAC1
[    8.176593] [drm] Connector 1:
[    8.176596] [drm]   DVI-D
[    8.176598] [drm]   HPD1
[    8.176603] [drm]   DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[    8.176606] [drm]   Encoders:
[    8.176609] [drm]     DFP1: INTERNAL_TMDS1
[    8.176612] [drm] Connector 2:
[    8.176615] [drm]   LVDS
[    8.176619] [drm]   DDC: 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c
[    8.176623] [drm]   Encoders:
[    8.176625] [drm]     LCD1: INTERNAL_LVDS
[    8.176628] [drm] Connector 3:
[    8.176631] [drm]   S-video
[    8.176634] [drm]   Encoders:
[    8.176636] [drm]     TV1: INTERNAL_DAC2
[    8.211276] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af:
[    8.212231] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af: excluding 0x100-0x107 0x140-0x14f 0x170-0x177 0x1f0-0x1f7 0x370-0x37f
[    8.213705] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff: excluding 0x3e8-0x3ff 0x4d0-0x4d7
[    8.214327] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff: excluding 0x100-0x107 0x140-0x14f 0x170-0x177 0x1f0-0x1f7 0x370-0x37f
[    8.215281] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x3e8-0x3ff 0x4d0-0x4d7
[    8.215901] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[    8.216609] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7: clean.
[    8.217212] pcmcia_socket pcmcia_socket1: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xd3fff 0xe0000-0xfffff
[    8.217276] pcmcia_socket pcmcia_socket1: cs: memory probe 0xa0000000-0xa0ffffff: clean.
[    8.217339] pcmcia_socket pcmcia_socket1: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff
[    8.217402] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean.
[    8.218478] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[    8.219078] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xd3fff 0xe0000-0xfffff
[    8.219140] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean.
[    8.219203] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff
[    8.219265] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[    8.221462]  clean.
[    8.309763] [drm] Possible lm63 thermal controller at 0x00
[    8.330437] intel8x0_measure_ac97_clock: measured 65345 usecs (3140 samples)
[    8.330444] intel8x0: clocking to 48000
[    8.423636] cfg80211: Calling CRDA to update world regulatory domain
[    8.489637] [drm] fb mappable at 0x48040000
[    8.489643] [drm] vram apper at 0x48000000
[    8.489647] [drm] size 786432
[    8.489650] [drm] fb depth is 8
[    8.489654] [drm]    pitch is 1024
[    8.489972] fbcon: radeondrmfb (fb0) is primary device
[    8.535196] Console: switching to colour frame buffer device 128x48
[    8.541170] fb0: radeondrmfb frame buffer device
[    8.541175] drm: registered panic notifier
[    8.541192] [drm] Initialized radeon 2.10.0 20080528 for 0000:01:00.0 on minor 0
[    8.686327] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    8.687512] Registered led device: rt2800usb-phy0::radio
[    8.687553] Registered led device: rt2800usb-phy0::assoc
[    8.687593] Registered led device: rt2800usb-phy0::quality
[    8.688355] usbcore: registered new interface driver rt2800usb
[   10.388828] Adding 633852k swap on /dev/sda6.  Priority:-1 extents:1 across:633852k 
[   10.397309] EXT4-fs (sda1): re-mounted. Opts: (null)
[   10.647683] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   10.843484] loop: module loaded
[   11.777512] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[   12.500454] fuse init (API version 7.16)
[   13.617904] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   14.767550] IBM TrackPoint firmware: 0x0b, buttons: 2/3
[   14.916803] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input9
[   15.056259] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio4/serio5/input/input10
[   17.114924] apm: BIOS not found.
[   19.138445] lp0: using parport0 (interrupt-driven).
[   19.208456] ppdev: user-space parallel port driver
[   28.465604] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   37.544754] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   41.140231] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   46.448256] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[   46.840148] EXT4-fs (sda5): re-mounted. Opts: commit=0
[   47.029359] wlan0: authenticate with 00:18:39:a5:f8:5e (try 1)
[   47.031060] wlan0: authenticated
[   47.048109] wlan0: associate with 00:18:39:a5:f8:5e (try 1)
[   47.050183] wlan0: RX AssocResp from 00:18:39:a5:f8:5e (capab=0x411 status=0 aid=2)
[   47.050190] wlan0: associated
[   47.058575] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   58.016070] wlan0: no IPv6 routers present
[  594.269143] exe (3676): /proc/3676/oom_adj is deprecated, please use /proc/3676/oom_score_adj instead.
[  663.850183] Bluetooth: RFCOMM TTY layer initialized
[  663.850199] Bluetooth: RFCOMM socket layer initialized
[  663.850208] Bluetooth: RFCOMM ver 1.11
[  664.056344] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[  664.056355] Bluetooth: BNEP filters: protocol multicast
[  664.196773] Bridge firewalling registered

Kod:

:~$ bluetoothd --version
bash: bluetoothd: nie znaleziono polecenia

Kod:

:~# hciconfig -a
hci0:    Type: BR/EDR  Bus: USB
    BD Address: 00:15:83:43:FF:2C  ACL MTU: 310:10  SCO MTU: 64:8
    UP RUNNING PSCAN ISCAN INQUIRY 
    RX bytes:480209 acl:22 sco:0 events:51693 errors:0
    TX bytes:2597 acl:24 sco:0 commands:99 errors:0
    Features: 0xff 0xff 0x8f 0xfe 0x9b 0xff 0x59 0x83
    Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 
    Link policy: RSWITCH HOLD SNIFF PARK 
    Link mode: SLAVE ACCEPT 
Can't read local name on hci0: Input/output error (5)

Kod:

:~# hcidump -w hcidump.dump
-su: hcidump: nie znaleziono polecenia

Kod:

 hcitool scan
Scanning ...
Inquiry failed: Connection timed out

Ciężka sytuacja - zawsze działało od kopa po instalacji bluez, nawet niedawno jeszcze (gdy pisałem posta że akceleracja 3D padła). NIby nic wielkiego bo bluetooth używam od wielkiego dzwonu, ale jednak używam.

Ostatnio edytowany przez Jusko (2011-08-22 12:45:17)

Offline

 

#11  2011-08-22 22:36:28

  NIC - Członek DUG

NIC
Członek DUG
Skąd: Wrocław
Zarejestrowany: 2006-12-25
Serwis

Re: Bluetooth nie może podłączyć się z telefonem choć go wykrywa.

Wygląda na problem z RFKILLem, który jest ustawiany przy uruchamianiu bluetootha.

Pokaż/zobacz:

Kod:

ls -l /dev/rfkill

Ja mam: crw------- 1 root root 10, 62 08-15 17:59 /dev/rfkill

Jeśli nie ma (lub jeśli jest to też na wszelki wypadek): modprobe rfkill

Jeśli nie skutkuje:
Odszukaj za pomocą:

Kod:

find /sys | grep --color rfkill

i ustaw na "1" (innymi słowy włącz)

Coś takiego: echo 1 > /sys/devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/bluetooth/hci0/rfkill8/state


hcidump - jest programem instalowanym oddzielnie.  Trzeba by go doinstalować.
bluetoothd - siedzi gdzieś w sbin'ach, więc tylko root lub absolutna ścieżka go dosięgną (/usr/sbin/bluetoothd lub /sbin/bluetoothd lub /usr/local/sbin/bluetoothd )

hciconfig -a # to musi wykonać się bez błędu, jeśli wyskakuje tam błąd to bluetooth może nie działać prawidłowo.

Stronka-dom: http://titek.victorygames.pl
Jabber: nic@jabster.pl
Hobby: kompilowanie Linuksa, Bluetooth
Dystrybucja: żadna, bliski krewny LFS, składak

Offline

 

#12  2011-08-23 02:09:12

  Jacekalex - Podobno człowiek...;)

Jacekalex
Podobno człowiek...;)
Skąd: /dev/random
Zarejestrowany: 2008-01-07

Re: Bluetooth nie może podłączyć się z telefonem choć go wykrywa.

Właśnie się dowiedziałem, że Gentuś ma BT do naprawy:

Kod:

root  #  ls -l /dev/rfkill
ls: nie ma dostępu do /dev/rfkill: Nie ma takiego pliku ani katalogu

Kod:

root  # find /sys | grep --color rfkill | wc -l
0

Tylko, że u me BT działa ;)

Kod:

hcitool dev                                                                                           
Devices:
        hci0    00:15:83:15:A3:10

Pozdrawiam
;-)

W demokracji każdy naród ma taką władzę, na jaką zasługuje ;)
Si vis pacem  para bellum  ;)       |       Pozdrawiam :)

Offline

 

#13  2011-08-23 19:12:28

  NIC - Członek DUG

NIC
Członek DUG
Skąd: Wrocław
Zarejestrowany: 2006-12-25
Serwis

Re: Bluetooth nie może podłączyć się z telefonem choć go wykrywa.

Problemy z RFKILLem zależą od sterownika Bluetootha. Z tego co mi wiadomo rfkill nie jest konieczny, jednakże jeśli już jakiś sterownik z niego korzysta to potrzeba go mieć. "hcitool dev" nie jest dobrym wyznacznikiem działania BT. hci0 możesz mieć, ale wcale to nie oznacza że bluetooth działa (to samo jak się ma eth0). Czyżbyś nie miał Wifi/BT razem? Bo wtedy chyba rfkill jest konieczny. Do sprawdzenia sprawności BT polecam "hcitool scan && sdptool records $BD_ADDR", gdzie ostatnia zmienna to adres zewnętrznego urządzenia z BT, np. telefonu.

Być może potrzeba nowego firmwaru: git://git.kernel.org/pub/scm/linux/kernel/git/dwmw2/linux-firmware.git
Póki co wiem że dongiel "Asus" używający sterownika "ath3" wymaga firmwaru z tego gita.

Stronka-dom: http://titek.victorygames.pl
Jabber: nic@jabster.pl
Hobby: kompilowanie Linuksa, Bluetooth
Dystrybucja: żadna, bliski krewny LFS, składak

Offline

 

#14  2011-08-25 00:55:26

  Jacekalex - Podobno człowiek...;)

Jacekalex
Podobno człowiek...;)
Skąd: /dev/random
Zarejestrowany: 2008-01-07

Re: Bluetooth nie może podłączyć się z telefonem choć go wykrywa.

NIC napisał(-a):

Problemy z RFKILLem zależą od sterownika Bluetootha.......

Jeśli chodzi o to urządzenie (moje):

Kod:

Bus 004 Device 002: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)

czy np o to:

Jusko napisał(-a):

System wykrywa go jako:

Kod:

Bus 001 Device 006: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)

to wszystko, co mu do szczęścia w jaju potrzebne, nazywa się:

Kod:

CONFIG_BT_HCIBTUSB=y

+zależności funkcje samego BT, np:

Kod:

zgrep -i rfcomm /proc/config.gz
CONFIG_BT_RFCOMM=y
CONFIG_BT_RFCOMM_TTY=y

Wszystko razem u mnie wygląda tak:

Kod:

CONFIG_BT=y
CONFIG_BT_L2CAP=y
CONFIG_BT_SCO=y
CONFIG_BT_RFCOMM=y
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=y
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HCIBTUSB=y

I od kernela  2.6.32.*  do tej pory (3.0.3) nie miałem i nie mam żadnego problemu z BT.

Chociaż muszę przyznać, że na modułach ładowanych dynamicznie nie zawsze to działało.
Od kiedy wsadzilem moduły  na stałe w jajo, po prostu chodzi.
Więc raczej bluez jest walnięty, pamiętam że dlatego Ilin ma jakieś ubuntowe paczki blueza.

Pozdrawiam
;-)

Ostatnio edytowany przez Jacekalex (2011-08-25 00:59:19)

W demokracji każdy naród ma taką władzę, na jaką zasługuje ;)
Si vis pacem  para bellum  ;)       |       Pozdrawiam :)

Offline

 

#15  2011-08-25 00:59:23

  Jusko - Użytkownik

Jusko
Użytkownik
Zarejestrowany: 2009-07-09

Re: Bluetooth nie może podłączyć się z telefonem choć go wykrywa.

Ja się poddaję - przekopuję wszystko z tego tematu i po prostu nie działa. Poczekam na aktualizację bluez...

Offline

 

#16  2011-08-25 01:50:59

  Jacekalex - Podobno człowiek...;)

Jacekalex
Podobno człowiek...;)
Skąd: /dev/random
Zarejestrowany: 2008-01-07

Re: Bluetooth nie może podłączyć się z telefonem choć go wykrywa.

Na 99% masz walnięty bluez, spróbuj inną wersję - w Synapticu jest taka opcja wymuszenia wersji, z wiersza poleceń też można wybrać odpowiednią.

W demokracji każdy naród ma taką władzę, na jaką zasługuje ;)
Si vis pacem  para bellum  ;)       |       Pozdrawiam :)

Offline

 

#17  2011-08-25 02:00:18

  Jusko - Użytkownik

Jusko
Użytkownik
Zarejestrowany: 2009-07-09

Re: Bluetooth nie może podłączyć się z telefonem choć go wykrywa.

No tak, tylko że nawet bluez ze stabla nic nie daje, a Ubuntowy chyba w ogóle nawet nie widział podłączonego adaptera :-/

Ostatnio edytowany przez Jusko (2011-08-25 02:01:09)

Offline

 

 

Strony: 1

Stopka forum

Powered by PunBB
© Copyright 2002–2005 Rickard Andersson
Nas ludzie lubią po prostu, a nie klikając w przyciski ;-)